advertisement
▼
Scroll to page 2
of 32
LGEAL_LF-D7150A_ENG_106S DVD MICRO HI-FI SYSTEM OWNER'S MANUAL MODEL : LF-D7150 (LF-D7150A/D/X, LFS-D7150V) CD-R/R Please read this manual carefully before operating your set. Retain it for future reference. Designs and notice for specifications improvement. are subject to change without Safety Precautions CAUTION CAUTION Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance RISK OF ELECTRIC SHOCK DO NOT OPEN and has WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER concerning the additional outlets no specification (OR BACK) or branch circuits. Check the page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose damaged wall outlets, extension cords, frayed power cords, NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE damaged PERSONNEL. or cracked wire insulation are dangerous. Any these conditions could result in electric shock This lightning flash equilateral triangle with arrowhead symbol is intended to alert the within user an to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point important operating within user an equilateral triangle to the presence of Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. walked upon. Pay particular attention to plugs, wall the point where the cord exits the appliance. Notes on It is forbidden WARNING: TO REDUCE THE RISK OF FIRE OR ELEC- SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION: To ensure manual proper carefully a Laser use System. of this product, please and retain for future require maintenance, contact see service procedure. Use of controls, adjustments other than those specified an or read this owner's reference, should the unit authorized service location- the performance of procedures herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus shall not be exposed to water, dripping or splashing and that no objects filled with liquids, such 2 as vases, shall be fire. placed outlets, and (servicing) accompanying the appliance. employs of and maintenance instructions in the literature This unit or Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or is intended to alert the TRIC or or on the apparatus. via cable, copyrights: law to copy, broadcast, show, broadcast in public, or rent copyright material without by play permission. This product is equipped with copy protection measures developed by Macrovision. Copy protection signals are recorded on some discs. When recording these discs on a VCR, picture noise will appear during playback. This product incorporates copyright protection technology that is protected by certain U.S. patent claims and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. SERIAL NUMBER: The serial number is found on the back of this unit. This number is unique to this unit and not available others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. Serial No. ___________________________________ ___________________________________ to Table of Contents SpecialDVDFeatures.........................23 Introduction SafetyPrecautions...............................2 TitleMenu...............................23 TableofContents................................3 DiscMenu...............................23 BeforeUse...................................4-5 Precautions..................................5 CameraAngle............................23 ChangingtheAudioLanguage................23 ChangingtheAudioChannel.................23 NotesonDiscs...............................5 Subtitle.................................23 AboutSymbols...............................5 LastSceneMemory.......................23 FrontPanel/RearPanel...........................6 ScreenSaver............................23 RemoteControl.................................7 SystemSelect............................23 .24 OperationwithAudioCDandMP3/WMADisc .24 PlayinganAudioCDandMP3/WMADisc PlayableDiscs................................4 Preparation . Connections.................................8-10 ConnectingtoaTV............................8 ConnectingtoAntenna.........................9 .9 ConnectingtoAuxiliaryEquipment. .10 ConnectingtoOptionalEquipment ConnectingtoUSB...........................10 SpeakerSystemConnection....................10 BeforeOperation.............................11-20 VolumeAdjustment...........................11 SoundQualityAdjustment......................11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MUTE.....................................11 .11 XDSS(ExtremeDynamicSoundSystem). MP3Optimizer...............................11 XTSpro....................................11 . . . . . . . . . SPECTRUMEffect............................11 DIMMER...................................11 SettingtheClock.............................12 SleepTimerFunction..........................12 UsingMicrophone............................12 TimerFunction...............................13 Mini Glossary for Audio Stream & Surround Mode . . . . 14 SoundMode................................14 GeneralExplanation..........................15 On-ScreenDisplay............................15 InitialSettings.............................16-20 GeneralOperation.........................16 LANGUAGE.............................16 DISPLAY................................17 AUDIO.................................18 LOCK(ParentalControl)....................19 . . . . . . . . . . . . . . . Pause..................................24 MovingtoanotherTrack....................24 RepeatTrack/All/Off......................24 Search.................................24 OperationwithJPEGDisc.......................25 ViewingaJPEGdisc..........................25 SlideShow..............................25 MovingtoanotherFile......................25 StillPicture..............................25 Torotatepicture..........................25 ProgrammedPlayback..........................26 RepeatProgrammedTracks.................26 .26 ErasingaTrackfromProgramList. .26 ErasingtheCompleteProgramList. OperationwithDivXDisc........................27 OperationwithRADIO........................28-29 Presettingtheradiostations.....................28 Listeningtotheradio..........................28 RDSOperation-OPTIONAL....................29 RDSTuning-OPTIONAL...................29 .29 RDSDisplayOptions-OPTIONAL. .29 ProgrammeSearch(PTY)-OPTIONAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference Troubleshooting................................30 LanguageCodeList.............................31 CountryCodeList..............................31 Specifications OTHERS................................20 About the Operation .20-24 OperationwithDVDandVideoCD. PlayingaDVDandVideoCD....................20 . . . . . . . . . . . symbols for instructions . GeneralFeatures..........................21-22 Indicates hazards other material likely damage. to MovingtoanotherTITLE....................21 .21 MovingtoanotherCHAPTER/TRACK. Indicates special operating Search.................................21 Indicates tips . Still Picture and . . Frame-by-Frame Playback . . . . . . . . cause harm to the unit itself features of this unit. . . . and hints for making the task easier. 21 SlowMotion.............................21 Repeat.................................21 RepeatA-B..............................22 TimeSearch.............................22 Zoom..................................22 MarkerSearch...........................22 3 or INTRODUC Before Use Disc-related terms Discs Playable Title (DVD only) DVD The main film content (8cm/12cmdisc) or (VCD) (8cm/12cmdisc) you to locate it Audio CD (8cm/12cmdisc) In addition, this unit can play a DVD±R, DVD±RW, SVCD, and CD-R or CD-RW that contains audio titles, MP3, WMA, JPEG or DivX files. -- -- (Video Sections of Notes Depending the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions. Notes on audio or an enabling On of code of the DVD player and DVDs player is designed and manufactured for playregion "5" encoded DVD software. The region the labels of type of player play only some can DVD discs indicates play those discs. This DVD discs labeled "5" 5 or "ALL". If you try to play any other discs, the message "Check Regional Code" will appear on the TV screen. Some DVD discs may not have a region code label even though 4 their track number, you to locate the track you want. playback is prohibited by area limits. There are two types of video CDs: equipped with PBC (Version 2.0) (Playback control) functions allow you to interact Video CDs PBC functions, or other typical computer-like operations. Moreover, still pictures high system via resolution menus, search can be played if they are included in the disc. Video CDs not This DVD can a video CD of video CDs and Video CDs. Some DVDs made for business purposes may not be played on the unit. unit on a you to locate the scene you want. A scene is composed of one or several tracks. with the which only) a picture or a musical piece CD. Each track is assigned video CD with PBC other functions may be added. Refer also to the instructions supplied with the DVDs or on CD and audio CD (Playback control) functions, moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a Types code easily. Scene playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available back of enabling DVDs and Video CDs Some Regional feature content Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. Track on accompanying additional feature content, or music album. Each title is assigned a title reference number Video CD -- or equipped with PBC (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. Before Use (Cont'd) After the unit Handling When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position the unit away from the TV, VCR, unit after removing the disc. To keep Do not near radio, or turn off the or use volatile such liquids, leave marks Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sunthere may be a considerable increase inside the car. light, as Cleaning temperature discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out. on a plastic products in long period of time. They will or the surface. Do not To clean the cabinet soft, dry cloth. If the surfaces soft cloth use thinner, or are moistened with lightly solution. Do not benzine, case. the unit Cleaning use a store the disc in its insecticide spray, as the unit. Do not leave rubber a playing, the exterior surfaces clean contact with the unit for Use discs Storing Precautions a extremely dirty, mild detergent strong solvents such as these as might damage alcohol, the surface strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static use spray intended for older About records. vinyl Symbols of the unit. About the To obtain clear picture The DVD player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. a " " may appear on the TV This icon means the function manual is not available About the disc on Handling Discs discs Do not touch the Hold the disc get on playback by the edges side of the disc. so that fingerprints the surface. Do not stick paper or tape on the disc. will not on DVD VCD Video CDs CD Audio CDs MP3 MP3 disc WMA WMA disc JPEG JPEG disc screen for instructions following symbol is represented by the symbol. one to the disc DVD DivX during operation. explained in this owner's that specific DVD video disc. symbols A section whose title has applicable only Notes symbol display of the DivX disc 5 INTRODUC Front Panel/ Rear Panel 1 19 OPTICAL IN 2 3 4 SOUND XDSS PLAY 14 R FM GND L L A 18 U TUN. 56 (-) TUN. STOP XTSpro (+) R 13 EQ SPEAKERS 17 15 VOLUME MICVOL. FUNCTION X AM 7 12 8 11 9 10 16 1. CD DOOR 9. 2. DISPLAY WINDOW 10. USB connector 3. ? POWER ? CLOCK button ? ( ) 11 .MIC JACKS 13. ? SET/CD[] button 15. ANTENNA Connector ? MP3 OPT. button 16. ? MONO/STEREO ? Z OPEN/CLOSE button SOUND button 5. ? ? ? ? PLAY STOP TUN. OPTIONAL button (-/+) buttons CD SKIP button 17. AUXILIARY INPUT (. ? >) button 6. XTSpro 7. FUNCTION 8. VOLUME knob (FUNC.) (AUX) connector COMPONENT VIDEO OUT (Y bb/BB button (EQ) 18. SPEAKER Connector 19. (x) 3.5mm - POWER CORD button (G) 3.5mm 14. XDSS button RDS button (MONO/ST.) PHONES) - (MIC VOL.) EQUALIZER PATTERN ? : ( (MIC1, MIC2) 12. MIC VOLUME KNOB TIMER button 4. 6 button HEADPHONE SOCKET DIAL buttons Pb Pr) Connector ? MONITOR OUT Connector ? S-VIDEO OUT Connector ? OPTICAL IN Connector (PROGRESSIVE SCAN) Remote Control POWER MUTE 20 1 TUNER/BAND AUX/ D.INPUT DVD 1. POWER button 2. FUNCTION SELECT buttons 3. (TUNER/BAND, DVD, AUX/D.INPUT, USB) NUMERIC buttons (0-9) EQUALIZER (EQ), XDSS, XTS pro, SOUND, USB 2 4. AUDIO, SUBTITLE, RETURN buttons 5. SET UP button 6. ? INTRODUC SLEEP 19 3 ARROW buttons (For use EQ XTS pro XDSS ? 4 AUDIO SOUND MODE SET UP SUBTITLE PRESET RETURN on a GUI screen.) (-/+) buttons (-/+) buttons TUN. SELECT/ENTER button 8. MENU button (Use 18 selection a PRESET 7. DISPLAY 5 in //) screen, TITLE and MENU menu ? / ( highlighting the MENU button to included on DVD video the display discs.) menu screen + TUN.- SCAN 9. TUN.+ (FF/GG)/ SLOW (t/T)/ SKIP (./>) buttons SELECT 6 /ENTER 7 MENU TITLE 17 8 9 10. PROG./MEMO, REPEAT, REPEAT A-B buttons 11 S TO P . ECHO VOL. 14. MIC VOL. 16 10 SKIP STOP PAUSE/STEP CLEAR ZOOM PLAY ) MARKER buttons on DVD video screen 19. SLEEP button 20. MUTE button MIC VOL. Remote control Operation Range Point the remote control at the remote sensor battery and press Distance: About 23 ft installation Detach the the buttons. remote the title 14 Remote Control Angle: display discs.) 18. DISPLAY button SEARCH 13 remote buttons the TITLE button to included DISP.MODE ECHO VOL. / ( ) 16. VOLUME -/+ buttons (Use 15 DIMMER buttons 17. TITLE button 11 12 (G) 15. MARKER/ SEARCH buttons SLOW REPEAT A-B / ( SCAN REPEAT PLAY 12. CLEAR/ ZOOM/ DIMMER/ DISP.MODE buttons 13. PROG./MEMO (x), PAUSE([])/ STEP, the (7 m) from the front of the rear battery cover on of the remote trol, and insert two R03 AAA) batteries with aligned correctly. sensor About 30° in each direction of the front of the con- (size and sensor Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 7 Connections Connecting Make the to a TV of the following connections, depending capabilities of your existing equipment. one ips Depending on Progressive Scan (ColorStream If your television is your TV and other equipment you wish to connect, there are various ways you could connect the unit. Use one of the connections described below. best connections. connection high-definition or "digital ready" television, you may take advantage of the unit's progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the unit. on Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the pro) a Connect the COMPONENT VIDEO OUT (PROGRESSIVE SCAN) jacks from the unit to the corresponding in jacks on the TV using an optional Y Pb Pr cable (C). Caution -- Make sure the unit is connected Select the correct AV -- directly to the TV. your TV. Do not connect your unit to TV via your VCR. The DVD image could be distorted by the copy protection input on ote -- Set the Progressive to "On" on the Setup progressive signal, see page 17. menu for system. Video connection Connect the MONITOR OUT VIDEO IN jack on the TV jack from the unit to the using the video cable supplied (V). S-Video connection OPTIC IN Connect the S-VIDEO OUT the unit to the S- VIDEO IN S-Video cable jack Component on the TV Video jack on using the (Color Stream ) L (S). connection Connect the COMPONENT VIDEO (PROGRESSIVE SCAN) jacks from the unit to the corresponding in jacks on the TV using an Y Pb Pr cable (C). COMPONENT VIDEO / PROGRESSIVE SCAN INPUT Y Pb Pr Rear of TV 8 V S C S-VIDEO IN VIDEO IN L Connections Connecting Connect the to Antenna supplied Connecting FM/AM antennas for listening to the radio. - You to VCR can use Auxiliary Equipment or other unit connected to the AUX connector. Connect the AM loop antenna to the AM antenna connector. - Connect the FM wire antenna to the FM antenna PREATION connector. OPTICAL IN R FM L A GND L U X AM R SPEAKERS R FM GND A L L U AM X R SPEAKERS To AUDIO IN IN OUT VIDEO otes To prevent noise pickup, keep the AM loop away from the unit and other component. Be (L) AUDIO (R) antenna fully extend the FM wire antenna. After connecting the FM wire antenna, keep it horizontal as possible. sure AUDIO To AUDIO OUT to as VCR (or Auxiliary Device, etc) Connect 1 Select 2 dial a VCR or auxiliary device, etc to the AUX connector. on AUX function the front turning the FUNCTION panel or pressing the AUX/D.INPUT button "AUX" will be shown on on the remote control. the display window. 9 Connections Connecting to You optical output can use an Optional Equipment of Digital Connecting Device to the XTSpro OPTICAL IN connector. STOP to USB EQ VOLUME MICVOL. FUNCTION DVD Player (or Digital Device, etc) OPTICAL OUT USB Memory, MP3 Player (or Memory Card Reader, etc.) 1 OPTICAL N Connect the USB port of USB memory (or MP3 player, etc) to the USB connector on the front panel. 1 Connect of DVD optical output Player (or Digital Device etc) to the OPTICAL IN connecan tor. 2 Select AUX OPT function dial on the front panel AUX/D.INPUT button or on "AUX OPT" will be shown Speaker System Connect the speaker turning the FUNCTION pressing the the remote control. on the display window. 2 Select USB function dial on ton on the front turning the FUNCTION panel or pressing the USB but- the remote control. "USB" will be shown on the display window. ote The DivX files in your memory card will not be able to be played. Connection cords to the speaker connector. otes Be sure to match the cord to the on the speaker appropriate terminal components: + to and + --to--.Ifthecordsare reversed, the sound will be disOPTICAL IN torted and will lack base. If you use front speakers with low maximum input rating, R FM GND AM A U L L adjust the volume avoid excessive X R SPEAKERS carefully output on the speakers. Connect the correctly. If it Left/Right speaker reversed, the sound may be distorted. 10 to Before Volume ?Turn MP3 Adjustment VOLUME knob clockwise to increase the sound level, ? Operation or counterclockwise to decrease it. Press VOLUME VOLUME + to increase the sound to decrease it - on This function is is level, or use the remote control. Optimizer ?To compressible MP3 file. It Each time you press MP3 OPT. the the following order. t in setting changes MP3-OPT OFF Quality Adjustment activate stereo sound Select a desired sound mode the front on panel or by using the EQ button the remote control. Each you press the button the indication follows in the display window. FLAT POP → → CLASSIC ← ROCK changes as ↑ JAZZ ? for the bass sound to make sweet sound. improved MP3-OPT ON Sound optimizered ← Headphone Connect a DRAMA stereo headphone plug ( 3.5mm) → XTS-P OFF SPECTRUM Effect when can mute telephone, sound, press again to your unit in order, for example, " " Whenever you press the DISP.MODE button on the remote control, you can enjoy the spectrum change with to indicator flashes in the dis- types in the display window. DIMMER This function is turned the LED front window. panel off and darken the power-on status XDSS (Extreme Dynamic Sound System) Press XDSS button repeatedly bass. XDSS ON → creates into the Press MUTE to turn off the the of the LG unique quality Technology the optimum sound for you to play the perfect playback of the original sound and to feel the living sound source. Each time you press XTS pro the setting changes in the following order. 6 restore. You sound Jack MUTE play The XTS-P ON headphone jack. The speakers are automatically disconnected you plug in the headphones (not supplied). answer XTS pro to reinforce treble and Press DIMMER front panel (Light-emitting diode) of display window by half in . once. The LED (Light-emitting diode) is turned off. If you press it once more, the display window will be darken by half. To cancel it press the button again. XDSS OFF 11 of PREATION Before Setting Operation the Clock To cancel Press CLOCK. 1 setting If you wish to stop the function, press the SLEEP button repeatedly until "SLEEP 10 appears, and then press " requires setting, press and for more than 2 seconds.) The hours display begins to blink. (If Timer Sleep the clock hold CLOCK SLEEP once after "SLEEP 10 again " shows on the display. - Select 2 24 hour a 12 hour or bb/BB > . pressing cycle (12HR) on the cycle by front panel. You sing to a music microphone to the unit. cycle. Use . bb/BB > 4 on the front panel to set the correct hours. 2 on the front panel the display In as microphone to the MIC socket. shown in the display window. a music you want. appeared in the using the knob to minimum MIC or microphone, set the MIC volume turn off the MIC and remove the microphone from the MIC socket. If the microphone is set too near the speaker, a howling sound may be produced. In this case, move the microphone away from the speaker or decrease the sound level by using the MIC volume control. If sound through the microphone is extremely loud, it ote window, follow will be When not window. When the clock is not a otes correct minutes. on by connecting Sing along with the accompaniment. Adjust the microphone volume by turning to set Press SET/CD[ [ and the correct time is shown 7 source VOLUME KNOB. Use . bb/BB > 6 the Play 3 Press SET/CD[ [. 5 - "" Press SET/CD[ [ to confirm the selected hour 3 can Connect your 1 (24HR) or Using Microphone display below. the clock is set, prese the CLOCK button. The clock will be shown in the display window for may be distorted. In this case, turn the MIC volume control toward minimum. case about 5 seconds. - In case the as the clock is not set, the clock will be blinked in display window for about 1 minute. Set the clock above. 1 To sleep timer is set, the unit automatically the specified time has elapsed. specify the time delay off 2 automatically 30 3 means → 20 →10 → To check the SLEEP 180 for see that the system turns after 180 minutes. Each time you press SLEEP the in the following order. SLEEP 180 →150 turns before the power is turned off, press SLEEP. In the display window you can about 5 seconds. This → 120 →90→80→70 setting changes → 60→ 50 → 40 → OFF→SLEEP 180... remaining time until the power is turned off. function is active press SLEEP The time remaining until the unit turns off is While the sleep briefly. displayed for about 5 seconds. ote If you press SLEEP while the the SLEEP time is reset. 12 You give an microphones. can Volume echo effect to the sound from the ( increase the echo volume When the off after Adjust ECHO Press the ECHO VOL. Timer Function Sleep To sleep time is displayed, / or ) on the remote control to decrease it. Before Operation Timer Function With the TIMER function you can have the radio reception, CD play and USB play turned on and off at the time desired. 1 7 8 Press CLOCK to check the current time. 2 TIMER to enter the timer TUNERtDVD/CD tUSB flash in . bb/BB > on the by pressing front panel. on Press SET/CD[ ] to confirm the turn on minutes time. 'OFF TIME' indicator appears for about 0.5 seconds in the display window and then For your reference If you don't set clock, timer function doesn't work. Press Set the minute to switch PREATION disappears. mode. setting the display win- 9 Set the hour to switch off . bb/BB > on the by pressing front panel. dow in turn. For your reference If you want to correct the previous press and hold the seconds. TIMER button setting, - The "" 3 4 previous memorized TIMER memorized timer for more setting display window. indicator appears in the on Time and 12 Press SET/CD[ ]. 13 Adjust 14 Press SET/CD[ ]. bb/BB > flashes. 1. When you select the TUNER Select the previous memorized function, preset on the front panel and press SET/CD[]. 'ON TIME' indicator appears for about 0.5 seconds in the display window and then disappears. 2. When you select DVD/CD or USB function, 'ON TIME' indicator appears for about 0.5 seconds in the display window and then . bb/BB > on by pressing front panel. Press SET/CD[ ] to confirm the turn time. Turn the 15 on the The selected timer functions setting To activate hour by pressing front panel. system off. switched timer on . appears in the display window and the timer setting has been completed. or button and off at the on are automatically preset times. check the timer TIMER button is select the timer set on the the volume level by pressing panel. "" Each time the Set the hour to switch the front on bb/BB > . To cancel disappears. 6 11 Set the minute to switch off than 2 Press SET/CD[ ] when the desired function number with . bb/BB > 5 10 Press SET/CD[ ]. or pressed cancel. You can you can also check the status. or check the repeatedly so that timer, press the " " TIMER appears in the display win- dow. To cancel the repeatedly so TIMER, press the that " " disappears TIMER button from the display window. ote If you insert the DVD,VCD or MP3 except audio CD the unit, the timer function will be operated to the on TUNER. 13 Before Mini Operation Glossary for Audio Stream & Surround mode Sound Mode You DVD VCD CD enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. The Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital mark, you program source. If you play DVDs with can enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and double-D symbol are trademarks of Dolby Laboratories. When DVD is inserted BYPASS When Video CD is inserted " Outputs the sound from the front left and and subwoofer. " right speakers You can change the Digital Audio Output mode by pressing the AUDIO button on the remote control during playback. Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used. Each time you press SOUND button, the "BYPASS" indicator will only be shown in the display window. Each time you press SOUND button, the sound mode of Video CD is changed on the display window as the order. following BYPASS → CHURCH STUDIO → → CLUB → HALL → THEATER 1 → BYPASS... ote After you select the "Bypass" of sound mode by pressing SOUND button, press AUDIO button. The Left, Right and Stereo of audio channel will be displayed on the TV screen. When CD is inserted Each time you press SOUND button, the sound mode of Audio CD is changed on the display window as the order. following BYPASS → CHURCH STUDIO → → CLUB → HALL → THEATER 1 → BYPASS... For your reference ? You identify the encoding format of program software by looking at its packaging. Dolby Digital discs are labelled with the logo. Dolby Surround encoded programs are labelled with the logo. can - - ote When you the output quency). 14 play sound signals will tracks with 96kHz be converted to sampling frequency, 48kHz (sampling fre- Before Operation 3 Caution: Before using the remote select the device to be General This manual control, press the DVD button to operated. or (e.g., gives playback 2 status can number). some setting functions, setting. Title A-B Repeat title Repeat sequence Resume / play from this be displayed on the TV changed on the menu. can be prohibited or not available Notes Some discs may not provide all of the features on the on-screen display example shown below. If no button is pressed for 10 seconds, the on-screen display disappears. during playback. to select an item. highlighted. Example: On-Screen Display during playing DVD Items Function / Action using Title Number Shows the current title number and total number of titles / 1/3 Number 1/12 Time search skips Audio / to select item to the desired title number. Shows the current chapters / Shows the 0:20:09 skips chapter elapsed playing chapter number. Subtitle Shows the current subtitle / time / searches / by elapsed ABC 1 ENG language, number / changes language Sound / changes angles ,Numbers or /or the AUDIO the set- /or ting. SUBTITLE Shows the current 1/3 or Numbers, SELECT/ENTER Shows the current audio soundtrack and channel ,Numbers SELECT/ENTER time. encoding method, setting. Selection Method SELECT/ENTER number and total number of to the desired language and Digital Audio Output mode language PREATION point the disc. on The selected item will be Angle For item. Te mporary Feedback Field Icons the display operation Press DISPLAY Chapter an Display Some items Press of be also be used for press SELECT/ENTER to execute the basic instructions for is not available On-screen 1 title can setting Explanation On-Screen screen. the change The number buttons Action General to or numbers operating unit. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the unit Press / angle number changes the angle. Shows the current sound mode / Bypass and total number of changes the / setting. /or SOUND Example: On-Screen Display during playing VCD Items Function / Action using Track Number Shows the current track 1/3 Time PBC On mode / Shows the 0:20:09 Audio Channel skips / to select item number, total number of tracks and to the desired track number. elapsed playing Shows the audio channel / time (display only). changes Selection Method / ,Numbers or SELECT/ENTER Numbers, SELECT/ENTER the audio channel. /or AUDIO Sound Bypass Shows the current sound mode / changes the setting. /or SOUND 15 Before Initial Operation LANGUAGE Settings the By using Setup can make various menu, you ments to items such as picture and sound. You set for the subtitles and the language among other things. a item, To For details Setup each Setup on display can also menu, menu OSD English Disc Audio Original Disc Subtitle Off Disc Menu Original and exit the Menu: Press SETUP to display the menu. SETUP will take you back to initial To go to the next level: on on A second press of screen. Move previous level: Select a language for the Setup menu Operation Select the audio), Press SETUP. 1 The Use setup 2 press The 3 menu / screen item, / / Some items 16 option then display. as well as alternate setting setting(s). to select the second desired for the option to move to the third level. to select the desired require Press SETUP or setting then to confirm your selection. additional steps. PLAY to exit the setup disc DVD was language Refers to the original language (disc in which the recorded. Other: To select another language, press number but- will be shown the current 4 press SELECT/ENTER 5 on-screen you prefer for the audio track subtitles, and the disc menu. Original: to select the desired then press Use appears. to move to the second level. selected Use and the remote control. Disc Audio / Subtitle / Menu General Select OSD the remote control. To go back to the Press adjust- pages 16 to 20. see Press LANGUAGE menu. tons to enter the corresponding 4-digit number according to the language code list on page 31. If you enter the wrong language code, press CLEAR on the remote control. Before Operation DISPLAY Progressive Scan DVD DISPLAY TV 16:9 Aspect Display Mode Progressive Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On. Widescreen Scan Off To Turn ON Move TV Aspect a 16:9: Select when scan: Connect component out of the DVD to the input of your monitor/television, set your television or monitor to Select Component Input. DVD 4:3: Select when progressive 1. Select standard 4:3 TV is connected. a "Progressive then press 16:9 wide TV is connected. Scan" on the DISPLAY menu . DISPLAY TV Mode Display DVD Off Aspect Display Progressive Display Mode setting works only when the TV On Mode Scan Aspect mode is set to "4:3". upper and Displays a wide picture with lower portions of the screen. Panscan: Automatically displays the wide picture and cuts off the portions that do not fit. Letterbox: the entire screen bands on the Prev. on 2. Select "On" the using / Move Select buttons. 3. Press SELECT/ENTER to confirm your selection. The confirm menu will appear. 4. When the confirm menu appears Cancel is buttons 5. highlighted as default. to highlight Enter. Pressing Enter will set the player on your screen Use the to / Progressive scan mode. Caution Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit. 1) Remove any disc from the unit and close the disc tray. See that "NO DISC" is displayed on the display window 2) Press and hold STOP release it. The video standard visible on a for five seconds then output will be restored to the picture will once again be conventional analog TV or monitor. setting, and (x) a 17 PREATION Before Operation AUDIO Each DVD disc has Set the audio variety of audio output options. player's AUDIO options according to the type system you a Vocal of use. AUDIO Set Vocal to On only DVD is The karaoke channels mix into DRC On Vocal On Move Dynamic Range Control (DRC) With the DVD can hear Select DVD program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing dialog intelligibility. Set format, you a DRC to On for this effect. Notes The DRC function works depending 18 of recorded discs. Dolby Digital The level of only during playback Dynamic Range Compression on the DVD disc. DVD may differ playing. a when a multi-channel Karaoke normal stereo sound. on the disc will Before LOCK Operation Password (Parental Control) You LOCK Rating Unlock Password **** Code Country can 2 Follow control information certain scenes on step 2 on the LOCK shown left as menu then press (Rating). "Change" . or 3 highlighted. Enter the new 4-digit code, then press SELECT/ENTER. Input it again to verify. 4 Press SETUP to exit the that may not be suitable of these discs contain parental to the complete the disc. Movies and menu. Select scenes Many that applies change password. "New" is DVD for children to view. or Select Password If you Some movies contain enter 1 NG Move Rating (Security Code) disc scenes are or to rated from 1 to 8, depending on the country. Some discs offer more suitable scenes as an alternative. forget your Security Code If you forget your security code you the following steps: 1 Input the 6-digit number security code is and the 2 Enter a new code can "210499" on clear it the using setup menu cleared. described above. as ote The to control feature allows you to block access below the rating you input, thereby preventing parental scenes your children from being able to view material you believe is unsuitable. 1 2 Select "Rating" on the LOCK appears on the TV screen, and then press SETUP to move to the (x) menu. Country Code DVD . Enter the code of the To access the Rating, Password and Code features, you must input the security code you created. If you have not prompted to do Input Enter yet entered 4-digit code and it again and press a a Country 4-digit security code you are so. a If you make press SELECT/ENTER. SELECT/ENTER to verify. mistake before pressing SELECT/ENTER, press CLEAR. 3 " INPUT PASSWD press STOP setup then press menu When " Select rating a from 1 to 8 using one (1) has the most restrictions is the least restrictive. If you select and the disc unlock, parental control is plays whose standards disc, based on the list chapter. 1 Select 2 Follow 3 Select the first character using Shift the button and select the press "Country Code" on the LOCK menu then . step 2 as cursor shown left using 4 second character using 5 Unlock used to rate the DVD video in the reference / the buttons. Rating 1-8: Rating and rating eight (8) were country/area (Rating). / / buttons. buttons. Press SELECT/ENTER to confirm your country code selection. not active in full. ote If you set a rating for the player, all disc scenes with the same rating or lower are played. Higher rated scenes are available on not played unless an alternate scene is the disc. The alternative must have the rating or a lower one. If no suitable alternative is found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc. same Press SELECT/ENTER to confirm your 4 selection, then press SETUP rating to exit the menu. 19 PREATION Before Operation Operation OTHERS Playing a with DVD and Video CD DVD and Video CD OTHERS Playback Setup PBC On DivX(R) Registration Select Turn DVD VCD the TV and select the video on input source connected to the unit. Audio the PBC Set 1 Select Move VCD Playback Control to On (PBC) On:Video CDs with PBC Off. or are played according are played to the PBC. Off:Video CDs with PBC the same way You can the DivX(R) code is this code to the To learn 3 The only. this DivX(R) purchase videos Video On Demand format. go to www.divx.com/vod an If you rent the DivX VOD file, it has several viewing limits as show below. buttons to select the ? can options of setting play a watch the file. operating procedures for depending on the disc. use one different of your 7 views Yes The rental has been now No expired. This rental is the authorization This video player expired. error. is not authorized to play this video. menu menu screen. Notes -- Do you want to the and the exact You also may set PBC to Off. This rental video has 7 views left. A view ends when you stop playback, video, or turn off your player. title/chap- Use the number buttons to select the track you want to view and press RETURN to return to the menu screen. -- 20 // may differ Follow the instructions on the each Notes Display / VCD Menu the number which you a screen. using ? or loading ter you want to view, then press SELECT/ ENTER to start. Press TITLE or MENU to return to the menu encrypt movie file. ? displayed may be displayed first after Video CD which contains a menu. Use the player with Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rental Display is DVD The ? a menu screen menu screen DVD Video On Demand service. more tray. Press Z OPEN/CLOSE button to close the tray. Playback starts automatically. If playback does not start, press PLAY. In some cases, the disc menu might appear instead. XXXXXXXX : register This will allow you to rent and using connected to the unit. 2 as (Digital Right code for your unit registration use system and select Press Z OPEN/CLOSE button to open the disc If Management) Registration Please source the audio DivX show the DivX DRM Your input on Load your chosen disc in the tray, with the playback side facing down. Audio CDs. DivX(R) Registration system: Turn If parental control is set and the disc is not within the rating settings you must input the password. (See "LOCK" on page 19.) DVDs may have a region code. Your player will not play discs that have a region code different from your player. The region code for this player is 5 (five). with DVD and Video CD Operation Still Picture and General Features DVD Unless stated otherwise, all operations described playback. The player use the remote control. Some features may also be available on the Setup menu. 2 You can Moving to another TITLE disc has a more than one another title. Press DISPLAY while then the number appropriate (0-9) can move back is title by inputting DVD When a disc has title is playback / or use stopped to Slow Motion DVD its number while play- than more one more than track, you one chapter can move or a as Press . or T or player will enter SLOW mode. or T to select the - 3 To return to normal / to select the chappress DISPLAY and press ter/track icon. Then, input the chapter/track number or use/. Slow motion playback Repeat You DVD play can a Press REPEAT 1 Press m The player 2 Press m or M will now or M during playback. go into SEARCH mode. repeatedly to select the required speed: mX2, mX4, mX8, mX16, mX100 (backward) or MX2, MX4, MX8, MX16, MX100 (forward). With a DivX/ Video CD, the Search speed changes: mX2, mX4, mX8, mX16 (backward) or MX2, MX4, MX8, MX16 (forward). 3 To exit SEARCH mode, press PLAY. reverse is not applicable for VCD DivX title/chapter/all/track during playback on a to select disc. a desired repeat mode. ? DivX in Video CD. DVD Video Discs VCD PLAY, press PLAY. ote briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, Search during to another > DVD the remote control on required speed: t 1/2, t 1/4, t 1/8 or t 1/16 [(backward) DVD only]orT1/2,T1/4,T1/8orT1/16 (forward). follows: chapter/track VCD playback. The disc has con- move DivX on a by the remote on mode, press PLAY. to another CHAPTER/TRACK VCD repeatedly 3 To exit still motion 2 Use the t Moving now PAUSE/STEP 1 Press t play any stopped. during to to another title. can the remote control trol. DVD title, you will on go into PAUSE mode. advance the picture frame-by-frame pressing You DivX VCD 1 Press PAUSE/STEP ote When Frame-by-frame playback Repeat Chapter/Title/Off Chapter: repeats the current chapter. ? Title: ? Off : - repeats the does not play repeatedly. DivX/ Video CDs ? Track ? All ? Off current title. - Repeat Track/All/Off repeats the current track repeats all the tracks on a disc. : : : does not play repeatedly. ote --OnaVideoCDwithPBC,youmustsetPBCtoOffon the setup menu to use the repeat function (See "PBC" on page 20). 21 OPERATION Operation with DVD and Video CD General Features A-B Repeat To repeat a DVD (continued) VCD sequence in You from point. 1 " - 2 Press REPEAT A-B at your chosen end again "A B" appears briefly on the repeat sequence begins. start points point. 2 1 Press DISPLAY 1 display appears during playback. on the The playing During disc playback, press MARKER when playback reaches the spot that you want to Repeat step Search icon in the the seconds, use / onds from left to right the number buttons to enter hours, minutes, and seconds, press SELECT/ENTER an invalid 1 2 3 DVD VCD during playback or still playback to activate the Zoom function. If you press ZOOM repeatedly, the increases up to four steps. 100% size → 1600% size 2 Use the zoomed 400% size → → magnification 800% size level → 100% size / / / buttons to move through function may not work for some DVDs. picture. ote The 22 zoom will appear / on to select the a screen. Marker the scene. During disc playback, Press / press SEARCH. menu will appear on the screen. to select the Marker number that you erase. Press CLEAR. Repeat steps 2 and 3 to erase additional Marker numbers. on The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM menu Marked Scene 5 To remove SEARCH. Zoom press SEARCH. The Marker number will be erased from the list. to confirm the disc. If you enter will continue from the current point. a want to 4 time, playback on a the MARKER SEARCH menu, press The MARKER SEARCH sec- in the box. starts from the selected time playback, seconds, press remove To clear the start time. Playback points SEARCH. to select the Time If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then enter the correct numbers. 4 Within 10 1 to enter up to nine Marker will start from the Marked Playback time of the display. start time. Enter required briefly. screen 3 Press SELECT/ENTER. The "-:--:--" appears in the Time Search box. 3 Within 10 the TV number that you want to recall. on-screen elapsed playing on-screen disc During 4 To seconds, press on Marked Scene a 2 Within 10 current disc. 2 Within 10 to be memorized. The MARKER SEARCH at screen. The Time Search box shows the point. Up disc. VCD The Time Search function allows you to start any chosen time on the disc. memorized a mark, follow these steps. a To Recall DVD can The Marker icon will appear To cancel the sequence, press REPEAT A-B. Time Search playback VCD memorize. TV screen, and the - 3 can To enter 1 Press REPEAT A-B at your chosen starting A appears briefly on the TV screen. " DVD nine title: a Marker Search the MARKER SEARCH menu, press with DVD and Video CD Operation DVD Features Special Last Scene DVD This the contents of DVD Video Checking DVDs may offer menus that allow you to access special features. To use the disc menu, press MENU. Then, number button to select an 3 To list menu can remove If you load a disc that has the the scene is automatically recalled. scene memorized, player does not memorize the you switch off the disc. player before scene of commencing a disc if to play the Screen Saver a menu, the Otherwise, the disc and subtitle scene player. This DVD If the current title has 2 The from the last disc that ote 1 Press TITLE. screen. scene option. / // buttons to highlight your Or, use the selection, then press SELECT/ENTER. Title Menu DVD remains in memory even if the disc from the player or switch off the remove you appropriate memorizes last player is viewed. The last discs: Menus press the Memory menu menu will appear on the may appear. angles, spoken language chapters for the title. camera options, and the title menu, press TITLE again. The appears when you leave the DVD mode for about five minutes. screen saver in player Stop System Select You must select the TV DVD Disc Menu press and hold PAUSE/STEP on the remote control for more than 5 seconds to be able to select a system Press MENU. The disc menu Camera is displayed. Angle If the disc contains (PAL, NTSC or AUTO). When the selected DVD system does not coincide with the system of your TV, normal colour picture may scenes angles, you can change during playback. to recorded at different a different camera camera / angle NTSC: angle appears on the Select when the unit is connected with Multi system TV. to select angle. The number of the current not be displayed. AUTO: 1 Press DISPLAY and then press the a system. If NO appropriate system mode for your DISC appears in the display window, display Select when the unit is connected with NTSCTV. window. 2 Select a desired Changing angle pressing the Audio the / different repeatedly during playback audio language or audio track. Changing the Audio Channel Select when the unit is connected with PALTV. Language Press AUDIO PAL: buttons. DVD to hear a VCD Press AUDIO different repeatedly during playback to hear a audio channel (STER., LEFT or RIGHT). Subtitle DVD DivX Press SUBTITLE different subtitle repeatedly during playback languages. to see the ote If appears, the feature is not available on the disc. 23 OPERATION with Audio CD and MP3/WMA Disc Operation Playing Disc Audio CD and MP3/WMA an MP3 CD Repeat You WMA MP3/WMA formatted play can CD-ROM, CD-R, recordings on a CD-RW discs. or title/chapter/all/track ? Press screen. or audio CD an / a menu to select SELECT/ENTER and a the on appears playback starts. Audio CD List ? track then press 1/12 0:00:00 Off(No display): CD 1 Press m or M will now player 2 Press m Track5 Track6 Track7 or MP3 / WMA Press to select / play repeatedly. WMA go into SEARCH mode. M MP3 / WMA disc SELECT/ENTER to 2. does not during playback. 3 To exit SEARCH Track8 see to select SELECT/ENTER. a limited folder, and press the folder contents. a ? track then press PLAY Playback repeat icon repeat mode. repeatedly to select the speed: mX2, mX4,mX8 (backward) MX4, MX8 (forward). Track4 / disc. The desired a MP3 Track3 Press disc. on a repeats the current track All: repeats all the tracks on a disc. The Track2 a WMA Track: Search Program Track1 1. playing 2 Press REPEAT to select Audio CD Once you insert MP3 CD appears. ? PLAY play can 1 Press REPEAT when The unit TV Track/All/Off required MX2, or mode, press PLAY. compatibility with this player is follows: as within 32 48 kHz (MP3), Sampling frequency: within 24 48kHz (WMA) Bit rate: within 32 320kbps (MP3), 40 192kbps (WMA) The player cannot read an MP3/WMA file that has a file extension other than ".mp3" / ".wma". CD-R physical format should be ISO 9660 If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is impossible to playback MP3 / WMA files. We recommend that you use Easy-CD Creator, which cre- - or ? starts. - - 0:00:00 1/104 ? MP3 / WMA List Program ? 1-Music1 2-Music2 ? 3-Music3 4-Music4 5-Music5 6-Music6 7-Music7 ates ? otes ? If you are in file list a on to return to the Folder the on list, use Press MENU to ? On move / to CD with MP3/WMA file and JPEG stop of the menu MP3/WMA is or highlighted. Then, MP3 CD press PLAY or / on top on to select press CD MP3 WMA > track. Press . twice In case of audio briefly CD, the track number during playback. 24 They should not to step back to go using directly to the .mp3 or .wma extension. contain special letters such as an The total number of files on This unit previous to any track, the numbered buttons requires discs and / ? the disc should be less recordings track. enter (0-9) to meet tain technical standards in order to achieve cer- optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback. Customers should note that briefly during playback to go to the to return to the beginning of the current or incorporate required to another Track next track or must maximum of 8 letters and a can during playback. playback, PAUSE/STEP again. Press . file, you WMA 2 To return to should have than 999. JPEG word use names system. *:"<>letc. ? JPEG then press SELECT/ENTER. 1 Press PAUSE/STEP Moving or ? highlight Press TITLE menu. mode and MP3/WMA Pause and want to the next page. switch MP3/WMA and JPEG the the menu stop mode and press SELECT/ENTER. ? a the MP3/WMA File ISO 9660 file an permission is in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. with JPEG Disc Operation Viewing This unit JPEG disc a Slide Show JPEG Use play discs with JPEG files. Before playing JPEG recordings, read the JPEG Recordings on right. can Insert notes on / // disc and close the tray. The JPEG menu appears on the TV screen. to highlight the (Slide Show) then press SELECT/ENTER. to another File Moving a JPEG Press . or > once advance to the next file JPEG during viewing a picture or to the previous file. OPERATION to JPEG Preview List Still Picture JPEG Folder 1 JPEG Folder 2 JPEG JPEG Folder 3 JPEG Folder 4 1 Press PAUSE/STEP JPEG Folder 5 JPEG Folder 6 The JPEG Folder 8 / Press to select 2 SELECT/ENTER. slide show. go into PAUSE mode. 2 To return to the slide show, press PLAY or press PAUSE/STEP again. JPEG Folder 7 a will during player now folder, and press A list of files in the folder To rotate picture JPEG appears. Press picture Tip If you list, are use in highlight the previous 3 or picture to rotate the counter-clockwise. / " buttons on the remote control to and press SELECT/ENTER to return to menu screen. JPEG disc as ? compatibility with this is limited player follows: upon the size and number of JPEG files, it could take a long time for the DVD player to read Depending the disc's contents. If you don't see an on-screen display after several minutes, some of the files may Slide Show starts from the selected file if be too While move Speed viewing a file, you can press STOP(x) to the previous menu (JPEG menu). Press MENU to ? There are (Slow), / reduce the resolution of the JPEG x 2048 pixels and burn another disc. to ? The total number of files and folders on the disc should be less than 999. ? Use large --- files to less than 2760 is not Off. Tip / move to the next page. four Slide >> Speed options: (Normal), >>> (Fast) and // to select the ? Some discs may be incompatible due to recording format or the condition of disc. ? Ensure that all the selected files have the If you set active. II (off). highlight the Speed. Then, use option you want to use then press extensions when to ? Speed option different Off, Slide Show is not ? copying into the CD ".jpg" layout. If the files have rename to a : SELECT/ENTER. ? clockwise a If you want to view a particular file, press / to highlight a file and press SELECT/ENTER or PLAY. option > during showing file list and want to return to the Folder a the " / File them names to be read are shown ".jpe" or ".jpeg" extensions, please as ".jpg" file. without ".jpg" extension will not be able by this DVD player. Even though the files as JPEG image files in Windows Explorer. 25 Programmed Playback The MP3 CD WMA function enables you to store your favorite tracks from any disc in the A program can contain 300 tracks (Audio CD/MP3/WMA). Program Insert 1 disc. a Repeat Programmed You Audio CD and MP3/WMA Discs: Audio CD 0:00:00 or MP3/WMA menu 1/12 appears 0:00:00 Audio CD as Program play Program ? Music8 Track1 Track8 Track2 Track3 Music1 Music16 Track3 Track12 Music2 Music5 Track4 Track7 Music3 Music9 Track5 Track6 Music4 Music1 Track6 Track9 Music5 Music7 Track7 Track1 Music6 Music6 Track8 Track10 Music7 Music3 ? ? MP3/WMA Menu title/chapter/all/track a 2 track a on disc. The desired a Off (No display): a 1 Use / erase does not Track from repeat icon repeat mode. / / from the the Program List to select the track that you wish list. Program Or, select list. play repeatedly. Program " Press SELECT/ENTER to the List. a disc. repeats the current track ALL: repeats all the tracks on a disc. 2 Press CLEAR. Select playing on a TRACK: Erasing to memory. Tracks appears. 2 Press REPEAT to select 1/104 List Audio CD Menu can 1 Press REPEAT when below. MP3 / WMA List player Repeat (Delete)" icon then place the selected track to erase additional tracks on on the list. " Press PROG./MEMO.. Or, select (Add)" icon then SELECT/ENTER to place the selected 3 track the on Program tional tracks on list. Repeat to place addi- the list. ote You can add all tracks in the disc. Select " (Add All)" icon then press SELECT/ENTER. 4 Select the track you want to start Program list. playing the on Tip Press MENU to move Press PLAY or to the next page. SELECT/ENTER to start. 5 Playback begins in the order in which you prothe tracks and "PROG." appears on the grammed display window. Playback stops after all of the tracks on the Program list have played once. ote To resume normal back, select a playback track of AUDIO and then press PLAY. 26 from programmed playCD (or MP3/WMA) list Erasing Select the Complete Program " (Del all)", then press complete Program for the disc is List SELECT/ENTER. The erased. ote The programs are also cleared when the disc is removed. with DivX Disc Operation The unit can Insert play the DivX files. DivX disc disc and close the tray. The DivX menu appears on the TV 1 as a screen. compatibility player is limited follows: ?A vailable resolution size of the DivX file is under 720x576 0:00:00 with this 1/12 (W x H) pixel. DIVX ? The file name of the DivX subtitle is available List 20-40 characters Movie Folder 1 (differs from by language). Movie Folder 2 Movie Folder 3 ? If there is impossible code to may be displayed as Movie Folder 4 " file, it Movie Folder 5 Movie Folder 6 express in the DivX mark on the dis" _ play. Movie Folder 7 Movie Folder 8 ? If the number of the screen frame is 1 ? / Press to select 2 SELECT/ENTER a folder, and press to see the folder contents. list, in the use / highlight the previous " buttons ports highlight or a some particular file, press Playable or Xvid, have this option. different levels of GMC or 3-point encoding, usually STOP(x) GMC. DivX subtitle file to exit. to select "SUBTITLE ON" mode subtile is only more playing than two a by pressing DivX file languages the . in the file, available. The DivX files in your memory card will not be able to be play. DivX file z ".avi ", ".mpg ", ".mpeg Playable Codec format " z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", "MP43 ", "3IVX ", "MP42 ". Playable Audio format z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ". ? Sampling frequency: within 32 48 kHz - Display called z ".srt ", ".smi ", ".sub ". When the subtile has within 24 DivX Press DISPLAY General of the record level. encoders, like DivX are file and press PLAY. subtitle file every time before original 1-point GMC, the unit sup- a otes sure audio is out- GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some Playable Be of 1-point, 2-point, starts. Playback or GMC? There SELECT/ENTER 4 If the file is recorded with MPEG4 menu screen. to Press the remote control to and press SELECT/ENTER to return to If you want to view / on operate normally. If the video and audio structure of recorded file * " 3 file list and want to return to the Folder a 30 per putted. Tip are not is not interleaved, either video ? If you second, this unit may over ? 40 during playback. playback status can be displayed Bit on (MP3), 48kHz (WMA) rate: within 32 320kbps (MP3), 192kbps (WMA) - - - the TV screen. 27 OPERATION Operation with RADIO Presetting the radio stations You 50 stations for FM and AM. can Before preset show either FM or on Every time you press changes alternately. this Press PRESET 2 repeatedly the next station you want TUN. (-/+) buttons. the remote control to AM in the on display window. the fornt panel. Or (-/+) on the remote control preset station you want. Each time you press this button, the unit tunes in button, AM and FM by pressing a on The last received station is tuned in. Or display window. the fornt panel. or Turn FUNCTION dial the remote control to on AM in the Turn FUNCTION dial Select show either FM sure Press TUNER/BAND 2 Press TUNER/BAND that you have turned the voldown to the minimum level. ume make tuning, to the radio Listening 3 Adjust to select the preset station. the volume VOLUME by rotating CONTROL KNOB on the remote (or pressing VOLUME ( control) repeatedly. / ) otes Automatic Press TUN. Manual for when the unit tunes in (-/+) briefly Press PROG./MEMO. A than 0.5 second. more and on (-/+) on Press PROG./MEMO. repeatedly. Repeat steps For manual ? For You the remote control. the remote control to want. again. to 5 to store other stations. on the remote control then 9 a (within 3 seconds). function mode ( ) to turn off the unit or (DVD/CD, AUX or USB). For your reference If a FM program is Press and hold PROG./MEMO. on the remote control for seconds, "CLEAR ALL" appears in the display window and then press PROG./MEMO. control, the stations are cleared. For your reference If all stations have already been on the remote ? entered, "FULL" message will appear in the display window for moment and then a preset number will flash. change the To recall preset number, follow the steps the desired repeatedly. a 4-5 . preset numbers Press and hold PRESET 28 the number buttons preset radio station directly. For example, to listen to preset station 4, press 4 on the remote control. To listen to preset station 19, press 1 To clear all memorized stations To preset radio station directly a can use to select ? about two tuning, see "Manual Tuning". automatic tuning, see "Automatic Tuning". Press POWER (or 2) non-preset radio stations To turn the radio off The station is stored. 1 ? To select 4 select the preset number you 6 station. preset number will flash in the display window. Press PRESET 5 a Tuning Press TUN. 3 (-/+) Scanning stops - To listen to Tuning (-/+) on the remote control until preset number appears or press the button select another noisy Press MONO/ST. repeatedly so that "STEREO" disappears in the display window. There will be no stereo effect, but the reception will improve. Press MODE/RIF again to restore the stereo effect. To improve reception Reposition the supplied antennas. with RADIO Operation RDS Operation - OPTIONAL Programme This unit is which equipped with RDS (Radio Data System), brings a wide range of information to FM radio. Now in use in many countries, RDS is a station call signs or network transmitting description of Search (PTY) system for information, A - OPTIONAL ability to encode broadcasts with Programme Type (PTY) codes that indicate the type of material being broadcast. The following list a station programme type text message about the station or specifics of musical selection and major benefit of RDS is its shows the abbreviations used to indicate each PTY along with an explanation of the PTY. OPERATION the correct time. NEWS News RDS AFFAIRS Current Affairs INFO Information SPORT Sports EDUCATE Educational DRAMA Drama CULTURE Culture SCIENCE Science VARIED Varied POP M Popular ROCK M Rock Music EASY M Easy Listening LIGHT M Classical Music CLASSICS Serious Classical Music OTHER M Other Music WEATHER Weather Information FINANCE Financial CHILDREN Children's SOCIAL Social Affairs PTY RELIGION Religious Broadcasts the (Programme type recognition)- The name of programme type is shown in the Display Window. PHONE IN Phone-In Programmes RT (Radiotext)- TRAVEL Travel and LEISURE Leisure and JAZZ Jazz Music COUNTRY Country NATION M National Music OLDIES Oldies Music FOLK M Folk Music DOCUMENT Documentary Programmes TEST Station Alarm Test ALARM 1 Emergency Tuning When - OPTIONAL FM station is tuned in and it contains RDS a the unit will and the well as automatically display RDS indicator will light in the station's call the Display data, sign Window indicators for the RDS services programme programme type recognition (PTY), Radiotext (RT) (PS), as and Clock Time RDS (CT) if transmitted Display Options The RDS system is by the station. OPTIONAL - of capable ety of information in addition transmitting wide vari- a to the initial call sign that appears when a station is first tuned. In normal RDS operation the display will indicate the station name, broadcast network front data panel types or Pressing RDS on the cycle through the various call letters. enables you to in the sequence: (PS→FREQUENCY→PTY →RT→CT) PS (Programme Service name)- The name channel is shown in the Display Window. of the A "text" message contains special information from the broadcast station. Note that this message may scroll across the display to permit message. CT (Time controlled the by channel)- Enables the unit to receive the actual time and show it in the Display Window. ote Some RDS stations may not choose to include some of these additional features. If the data required for the selected mode is not Display CT being transmitted, Window will show a PTY NONE, PS NONE message. the NONE, RT NONE, Speech Programme Music Programmes Programmes 2 3 4 Programmes Touring Hobby Music Message Broadcast Information You may search for a specific by following these steps: 1 Music Programme Type (PTY) Press TUNER/BAND to select FM mode. Press PLAY (G) on the front panel, the display will show the last PTY in use. Press PLAY (G) repeatedly to select a desired PTY. When the PTY is selected, press TUN. (-/+). The unit will go into an automatic search mode. When a station is tuned, the search will stop. 29 Troubleshooting Check the following guide for the possible cause of problem a before contacting service. Cause Symptom Correction No power. ? The power cord is disconnected. ? Plug the power securely. The power is on, but the unit does not work. ? No disc is inserted. ? Insert a disc. (Check that the DVD or, audio CD indicator in the DVD display is lit.) No ? The TV is not set to receive DVD ? Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. ? Connect the video cable into the picture. signal out- put. ? The video cable is not connected securely. cord into the wall outlet jacks securely. There is no sound or only a very low-level sound is heard. ? The connected TV power is turned off. ?T ? The equipment connected with the audio cable is not set to receive DVD signal output. ? Select the correct input mode of the audio you can listen to the sound from the unit. The audio cables ? Connect the audio cable into the ? not connected are securely The playback picture is poor. The unit does not start The power of the equipment connected with the audio cable is turned off. ? The audio connecting cord is damaged. the TV. so jacks securely. . ? urn on ?T urn on the equipment connected with the audio cable. it with ? Replace ? Clean the disc. new one. ? The disc is ? No disc is inserted. ? Insert a disc. (Check that the DVD, or audio CD indicator in the DVD display is lit.) ? An ? Insert a playable disc. (Check the disc color system and Regional code.) ? Place the disc with the ? Place the disc on the disc inside the guide. ? Clean the disc. ? Press the SET-UP button to turn off the dirty. playback. unplayable ? The disc is ? The disc is not ? The disc is ?Amenu disc is inserted. placed upside down. placed within the guide. is dirty. on the TV screen. playback type, side down. tray correctly menu screen. Severe hum heard. or noise is ? The Rating ? The plugs ? The disc is ? The speakers and connected poorly. ? and jacks are Cancel the ing level. ? level is set. ?W ipe them with with alcohol. dirty. dirty. components are function Rating ? Clean the disc. ? Connect the a cloth speakers or slightly and the rat- change moistened components securely. The unit is located with too close to the TV. Move your TV away from the audio compo- ? nents. Radio stations cannot be tuned in. ? The antenna is positioned or connected poorly. ? The signal strength of the stations is too weak (when tuning in with automatic tuning). ? No stations have been preset or preset stations have been cleared (when tuning by ? Connect the antenna ? Adjust securely. the antennas and connect antenna if necessary. ?T une in the station ? Preset the stations. an external manually. scanning preset stations). The remote control does not work 30 ? The remote control is not pointed at the remote sensor of the unit. ? Point the remote control at the remote of the unit. ? The remote control is too far from the unit. ? Operate (7 m). ? There is an obstacle in the path of the remote control and the unit. ? Remove the obstacle. ? The batteries in the remote control exhausted. ? Replace properly. are sensor the remote control within about 23 ft the batteries with new ones. Language Code Use this list to List your desired language for the Disc Audio, Disc Subtitle, Disc Menu. input following initial settings: Language Code Language Code Language Code Language Code Abkhazian 6566 Finnish 7073 Macedonian 7775 Slovenian 8376 Afar 6565 French 7082 7771 Somali 8379 Afrikaans 6570 Galician 7176 7783 Spanish 6983 Albanian 8381 Georgian 7565 Malagasy Malay Malayalam 7776 Sudanese 8385 Ameharic 6577 German 6869 Maltese 7784 Swahili 8387 Arabic 6582 Greek 6976 Maori 7773 Swedish 8386 Armenian 7289 Greenlandic 7576 Marathi 7782 8476 Assamese 6583 Guarani 7178 Moldavian 7779 Tagalog Tajik Azerbaijani 6590 Gujarati 7185 Mongolian 7778 Tamil 8465 Bashkir 6665 Hausa 7265 Nauru 7865 Tatar 8484 Basque Bengali; Bangla 6985 Hebrew 7387 7869 Telugu 8469 6678 Hindi 7273 7879 Thai 8472 Bhutani 6890 Hungarian 7285 7982 Tibetan 6679 Bihari 6672 Icelandic 7383 Nepali Norwegian Oriya Panjabi 8065 8473 Breton 6682 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Bulgarian 6671 Interlingua 7365 Persian 7065 Turkish 8482 Burmese 7789 Irish 7165 Polish 8076 Turkmen 8475 Byelorussian 6669 Italian 7384 Portuguese 8084 Twi 8487 Cambodian 7577 Japanese 7465 Quechua 8185 Ukrainian 8575 Catalan 6765 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Chinese 9072 Kannada 7578 Rumanian 8279 Uzbek 8590 Corsican 6779 Kashmiri 7583 Russian 8285 Vietnamese 8673 Croatian 7282 Kazakh 7575 Samoan 8377 Volapuk 8679 Czech 6783 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Danish 6865 Korean 7579 Scots Gaelic 7168 Wolof 8779 Dutch 7876 Kurdish 7585 Serbian 8382 Xhosa 8872 English Esperanto 6978 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 6979 Latin 7665 Shona 8378 Yoruba 8979 Estonian 6984 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 Faroese 7079 Lingala 7678 Singhalese 8373 Fiji 7074 Lithuanian 7684 Slovak 8375 Country Code Choose a 8471 8479 List country code from this list. Country Afghanistan Argentina Code Code Code ET Country Malaysia MY Saudi Arabia SA FJ Maldives MV SN AR Australia AU Finland FI Mexico MX Austria AT France FR Monaco MC Senegal Singapore Slovak Republic Belgium BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Islands HM Dutch Antilles AN Sri Lanka LK Canada CA HK New Zealand NZ Sweden SE Chile CL Hong Kong Hungary HU NG Switzerland CH China CN India IN Nigeria Norway NO Taiwan TW Colombia CO Indonesia ID Oman OM Thailand TH Congo CG Israel IL Pakistan PK TR Costa Rica CR Italy IT Panama PA Turkey Uganda Croatia HR Jamaica JM PY Ukraine UA CZ JP Paraguay Philippines PH United States US KE Poland PL Uruguay UY KW Portugal PT Uzbekistan UZ LY Romania RO Vietnam VN LU Russian Federation RU Zimbabwe ZW Czech Republic AF Denmark DK Japan Kenya Ecuador EC Kuwait Egypt EG El Salvador SV Libya Luxembourg Country Code Country Ethiopia Fiji SG SK UG 31 REF NC Specifications General Power Refer to the main label. supply consumption Power 70W Mass 4.0 External dimensions (W x H x D) kg 187 X 255 X 257 mm Tuner/Amplifier FM AM Tuning Range Intermediate Frequency Signal to Noise Ratio Frequency Response Tuning Range Intermediate Frequency Signal to Noise Ratio Frequency Response Output Power 87.5 60/55 dB 60 MHz, (Mono/Stereo) 450 kHz 34 dB 120 1800 Hz - 80W+80W(6Ω,THD10%) Frequency Response Signal-to-noise ratio 20000 Hz - 80 dB player 20000 Hz Frequency response (audio) Signal-to-noise ratio (audio) Signal-to-noise ratio (video) Dynamic range (audio) 40 Video 1.0 V output Video - More than 75 dB More than 55 dB (1 kHz) (1 kHz) More than 80 dB (p-p), 75 Ω (Y) 1.0 V (p-p), 75 Ω (C) 0.3 V (p-p), 75 Ω (Y) 1.0 V (p-p), 75 Ω (Pb)/(Pr) 0.7 V (p-p), output output 75 Ω Speakers Speaker Name Type Impedance Frequency Response Font Speaker (L/R) Bass Reflex 3Way 4Speaker 6Ω 60 - 20000 Hz Sound Pressure Level 82 dB/W Rated 80W Input Power Max. Input Power Net Dimensions (W Net Weight P/NO : (1m) 160 W x H 3834RH0106S x D) 87.5 -108.0 MHz 522-1620kHzor520-1720kHz 40 Component 65 -74 10000 Hz - 0.5 % S-video or 10.7 MHz T. H.D DVD/VCD/CD 108.0 MHz - 162X320X258 4.0 kg mm
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project