DVD/VCR COMBI RECEIVER Combi Receiver System OWNER'S MANUAL MODEL: LH-CX643 (Main Unit: LH-CX643S Speakers: LHS-CX643T, LHS-CX643C LHS-CX643W CD-R/RW PA L SECAM Before connecting up, operating please read this instruction repairing booklet carefully or this and product, completely. ARTIFACTS TO BE DISPLAYED IN THE PICTURE. CAUTION IN CASE OF 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS ECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE 'STANDARD Warning: To reduce the risk of electric shock, do of this not remove the cover or back There product. are no user-serv- iceable parts inside. Refer servicing to qualified service personnel. DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 625p DVD PLAYER, PLEASE CON- TACT OUR CUSTOMER SERVICE CENTER. SERIAL NUMBER: Warning: To reduce the risk of fire electric shock, do not expose this uct to dripping You prod- This number is splashing water, rain, not place objects filled as vases, on the prod- or moisture. Do with water such or or uct. find the serial number can unique on the back of the unit. to this unit and not available to others. You should record requested and retain this permanent record of your guide as a information here purchase. Model No. Serial No. ______________________________ ______________________________ Date of Purchase_________________________ Disposal Warning: This digital video disc player employs a laser system. Use of controls, adjustments, or the performance of procedures other than those specified here- is attached to symbol the prod- product it means by the European Directive a uct is covered 2002/96/EC. 2. All electrical and electronic exposure. be To appliance 1. When this crossed-out wheeled bin in may result in hazardous radiation Warning: of your old prevent direct exposure products should separately from the municipal waste stream via designated collection facilities appointed by the government or to laser beam, do not open the enclosure. Visible laser radiation when open. disposed of the local authorities. 3. The correct Never stare laser beam. Warning: directly will into the quences for the environment and human health. 4. For more detailed information about dispos- Caution: Do not install this product in a confined space such as a book case or similar unit. Notes on Copyrights: It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE 2 disposal of your old appliance help prevent potential negative conse- al of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. CAUTION concerning the Power Cord Most appliances recommend a dedicated circuit; That they be placed upon outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's is, a single manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked,pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. frayed power cords, or PlayingaDVDorVideoCD...............31-33 Contents GeneralFeatures.......................31 Introduction...................4 SymbolUsedinthisManual...............4 AbouttheSymbolDisplay..............4 NotesonDiscs..........................4 HandlingDiscs........................4 StoringDiscs.........................4 CleaningDiscs........................4 TypesofPlayableDiscs...................5 Regionalcode..........................5 Disc-relatedterms.......................6 FrontPanel.............................7 DisplayWindow.........................8 RemoteControl.........................9 RearPanel............................10 InstallationandSetup. . . . . . . . . .11 . TV&SetTopBox .11-12 (or another VCR Connections) Accessory Audio/Video (A/V) Connections to . . . . . . . . . DVD/VCRCombireceiver................13 RadioAerialConnections................13 SpeakerSystemConnection..............14 SpeakerPositioning.....................15 Mini Glossary for Audio Stream & Surroundmode.........................16 SoundMode...........................16 .17-21 BeforeOperation-VCRpart. .17 Using your receiver for the very first time SettingtheclockManually................18 Tosetthecoloursystem.................18 . . . . . . . . . . . Howtousethemainmenu..............19 .19 Tuning in TV stations Automatically .20 TuninginTVstationsManually. .21 ChangingtheorderofTVstations. . . . . . . . . . . . . . . . . . . . . . . DeletingTVstations...................21 .22-26 BeforeOperation-DVDpart. On-ScreenDisplay......................22 InitialSettings.......................23-26 GeneralOperation....................23 . . . . . . . . . . MenuLanguage....................23 DiscAudio/Subtitle/Menu. .23 DISPLAY...........................24 . . . . . . . . . TVAspect.........................24 DisplayMode......................24 ProgressiveScan...................24 TVOutputSelect....................25 AUDIO.............................25 5.1SpeakerSetup..................25 .25 DynamicRangeControl(DRC). . . . . . . . Vocal.............................25 OTHERS...........................26 PBC.............................26 AutoPlay..........................26 DivX(R)VOD.......................26 LOCK(ParentalControl)................26 Rating............................26 .26 Password(SecurityCode). CountryCode......................26 . . . . . . . . . . . Operation....................27 Playingatape.......................27-30 .27 CM(CommercialMessage)Skip OPR (Optimum Picture Response) .27 .28 InstantTimerRecording(ITR). Timer recording using On Screen Display .29 .30 IfTimerrecordeventsOverlap .30 Change (Deleting) the Timer Programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Search.............................31 .31 ChangingtheAudioChannel Still Picture and Frame-by-Frame Playback .32 SlowMotion.........................32 Random............................32 . . . . . . . . . . . . RepeatA-B..........................32 Repeat.............................32 3DSurround.........................32 TimeSearch.........................32 Zoom..............................33 MarkerSearch.......................33 SpecialDVDFeatures...................33 TitleMenu..........................33 DiscMenu..........................33 CameraAngle.......................33 .33 ChangingtheAudioLanguage . . . . . . . . . . Subtitles............................33 DVDAudioDiscs.........................34 .35 PlayinganAudioCDorMP3/WMADisc .36 AudioCDandMP3/WMADiscFeatures Pause..............................36 . . . . . . . . . . . MovingtoanotherTrack................36 RepeatTrack/All/Off...................36 Search.............................36 Random............................36 RepeatA-B..........................36 3DSurround.........................36 ProgrammedPlayback.....................37 .37 RepeatProgrammedTracks. .37 ErasingaTrackfromProgramList .37 Erasing the Complete Program List ViewingaJPEGDisc......................38 . . . . . . . . . . . . . . . . . . . . . . . . . SlideShow..........................38 StillPicture..........................38 . LANGUAGE.........................23 . . . . . MovingtoanotherTITLE...............31 .31 Moving to another CHAPTER/TRACK . . MovingtoanotherFile.................38 Zoom..............................38 Torotatepicture......................38 To listen to MP3/WMA music watching picture .38 5.1SpeakerSetup......................39 .40 PlayingaDVDVRformatDisc. . . . . . . . . . . . . . MaintenanceandService.................40 PlayingaDivXMovieDisc................41 Additional Features-VCR part . . . . . . . . . .42-43 . OnScreenDisplay....................42 TapeCounterMemoryStop.............42 .42 Friendly User Guide (Video Doctor) Hi-FiStereoSoundSystem.............43 .43 WideScreenCompatibility16:9 . . . . . . . . . . . . . . . Tosetthedecoder....................43 AdditionalFeatures.....................44 LastSceneMemory...................44 ScreenSaver........................44 VideoModeSetting...................44 CopyingfromDVDtoVCR................45 .45 Recording from another video recorder RadioOperation........................46 .46 PresettingtheRadioStations ListeningtotheRadio..................46 . . . . ToCleartheStoredRadioStations TuningintoaStationManually Tuning into a Station Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 .47 .47 Reference...................48 LanguageCodes.......................48 CountryCodes.........................48 Troubleshooting.....................49-50 Specification........................51-52 3 Introduction About the To proper use of this product, please read this owner's manual carefully and retain for future Symbol Display ensure reference. " " may appear on your TV display during operation and indicates that the function explained in this owner's manual is not available This manual provides information on the operation on that specific DVD video disc. and maintenance of your DVD player. Should the unit require service, contact an authorized service Notes on Discs location. Symbol Handling Used in this Manual The lightning flash symbol alerts you to the presence of dangerous voltage within the product enclosure that may constitute a risk Discs Do not touch the the disc on by the playback side of the disc. Hold edges so that fingerprints do not get the surface. Never stick paper or tape on the disc. of electric shock. The exclamation point alerts you to the presence of important operating and maintenance / servicing instructions. Indicates hazards unit itself or likely to other material cause harm to the damage. Note: Indicates special notes and operating features. Tip: Indicates tips and hints for A section whose title has is applicable only symbol. making Cleaning Discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out. of the following symbols represented by the one to the disc the task easier. Storing Discs After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. DVD-V DVD and finalized DVD±R/RW DVD-A DVD Audio discs VCD Video CDs CD Audio CDs MP3 strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static MP3 Discs spray intended for older WMA WMA Discs JPEG JPEG Discs Setting DivX Discs You must select one of your output VCR) to view on the TV screen. DivX Do not use the vinyl Output records. Source sources (DVD or ?If you want to view output source of DVD deck: Press DVD on the remote or DVD/VCR on the front panel until DVD indicator source on the front of DVD deck is viewed panel lights on the TV and output screen. ?If you want to view output source of VCR deck: Press VCR on the remote or DVD/VCR on the front panel until VCR indicator source 4 on the front of VCR deck is viewed panel lights on the TV and output screen. Types of Playable Discs Regional code This DVD player is designed and manufactured for playback of region "5" encoded DVD software. This unit can play only DVD discs DVD (8cm/12cmdisc) labeled "5" DVD audio discs (8cm/12cmdisc) Notes Video CD (VCD) (8cm/12cmdisc) ? on or "ALL". Regional Codes Most DVD discs have numbers in it clearly a globe visible on with the one or more cover. This number must match your DVD al code or the disc cannot play. Audio CD (8cm/12cmdisc) ? In addition, this unit plays DivX file, DVD -R, DVD +R, DVD -RW, DVD +RW, SVCD, and CD-R / CD-RW that contains audio titles, MP3, WMA, and/or JPEG files. 5 player's region- If you try to play a DVD with a different region code from your player, the message "Check Regional Code" appears on the TV screen. Notes: ? Depending ment or on the conditions of the the CD-R/RW (or DVD -R, recording equipDVD +R, DVD - RW, DVD +RW) disc itself, some CD-R/RW (or DVD -R, DVD +R, DVD -RW, DVD +RW) discs cannot be played the unit. on ? Do not attach any seal or label to either side labeled side or the recorded side) of a disc. ? Do not use shaped or (the irregularly shaped CDs (e.g., heartoctagonal) since they may result in malfunctions. Notes on DVDs and Video CDs Some playback operations of DVDs and Video CDs may be intentionally programmed by software manufacturers. This unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, therefore some playback features may not be available or other functions may be added. Manufactured under license from Dolby Laboratories. double-D symbol are Logic", and the trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved. "Dolby", "Pro Manufactured under license from Digital Theater Inc. US Pat. No's. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 and other US and Systems, world-wide "DTS Digital Digital patents issued and pending. "DTS" and Digital Surround" Theater Theater registered trademarks of Systems, Inc. Copyright 1996, 2003 Systems, Inc. All rights reserved. are 5 Disc-related terms PBC: DVD±R/DVD±RW version 2.0 disc formats. PBC allows you to interact with the system via menus, search functions, or other DVD -R and DVD +R Playback Control (Video CD only) Playback control is available for Video CD (VCD) are two different standards for recordable DVD drives and discs. This format allows information to be recorded onto the DVD disc DVD +RW and DVD -RW once. re-writable two standards for media, meaning the DVD erased and re-recorded. 4.38 are Gigabytes much. There only Single-sided content discs can can hold and double-sided discs hold twice are no dual layer single be sided recordable (Video CD) with quality stereo sound. MPEG MPEG is an international standard for video and audio compression. MPEG-1 is used in encoding video for VCD and provides for multichannel surround sound coding such as PCM, Dolby Digital, DTS and MPEG audio. (DVD video discs only) A title is generally a distinct section of a DVD disc. For example the main feature could be title 1, a documentary describing how the film was made could be title 2, assigned easily. a reference number film or one interview in popular compression format used for digital files that yields very high near-CD quality. a developed by Microsoft Corp. Joint Pictures Expert Group. file format that allows you to on the number of colors. JPEG is save compressed images with no limit a DivX name which is based on of a the revolutionary new using new video codec MPEG-4 standard for video.You will be able is audio discs only) or accompanying feature con- or Scene enabling you to locate it easily. (VCD) video CD with PBC (playback control) functions, moving pictures and still pictures are divided into sections called "scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling you to locate the scene you want. A scene is composed of one or several tracks. a compression to play DivX this DVD/VCR Combi receiver. A distinct element of audiovisual information, such as the picture or sound track for a specific language (DVD), or a musical piece on a video or audio CD. Each track is assigned a track number, enabling you to locate the track you want. DVD discs allow track of video of audio. 6 a Track DivX is the movies chapter in additional feature content, or music album.Each group is assigned a group reference tent On JPEG as a scene may not be recorded. WMA type of coding / decoding you to locate it assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters number Windows media audio file. A series. Each a The main audio content MP3 is enabling Chapter (DVD video discs only) A chapter is a segment of a title such Group (DVD MP3 audio Title and cast interviews could be title 3. Each title is A VCD holds up to 74 minutes (650 MB disc) or 80 minutes (700 MB disc) of MPEG-1 full-motion video along CDs. as discs. VCD typical computer-like operations. Moreover, still pictures of high resolution can be played if they are included in the disc. Video CDs not equipped with PBC (Version 1.1) operate in the same way as audio (with multiple angles) one and several tracks Front Panel EJECT(Z) Ejects Opens or the PAUSE/STEP(X/C) OPEN/CLOSE (Z) closes the disc tray. Pause playback of tape a or a disc in the DVD for repeatedly Remote Sensor Point the DVD/VCR Combi receiver remote control here. temporarily. frame-by-frame playback. Stops playback of a STOP (x) disc or tape. PLAY Tray (DVD deck) Insert a or VCR deck Press Disc tape in the VCR deck. To back play a recorded disc here. tape REC/ITR or (B) disc. (z) To record activate Instant normally or to Timer Recording. Cassette FM/AM To change between AM Insert Compartment (VCR deck) video cassette here. a and FM bands. Display window DVD/VCR Select on (output select) of your output sources to view the TV screen between DVD and VCR. one PROG./PRESET (v/V) To scan up or down through memorized channels or to control tracking during playing back a tape (VCR mode). To tune in the desired station (Radio Mode). INPUT SELECT Select the VCR deck's VIDEO IN/AUDIO IN source (Tuner, A1, A2 or AV3) (Left/Right) Connect the audio/video output of an external source system, TV/Monitor, Another VCR). Reverse SKIP/SCAN DVD: Go to beginning of current chapter/track or to (S/Q) previous chapter/track. Press and hold for two seconds for VCR: Rewinds the tape during the STOP mode or a for fast fast search. reverse reverse picture search. Forward SKIP/SCAN (R/T) DVD: Go to NEXT chapter/track. Press and hold for two seconds for a fast forward search. VCR: Advances the tape during the STOP mode or for fast forward picture search. VOLUME Control STANDBY/ON Switches the DVD/VCR Combi receiver ON and OFF. Turn the knob clockwise to increase volume, counterclockwise to decrease the volume. 7 Display Indicates current A disc is loaded in the DVD deck. audio stream. loaded in the DVD (Lights when a Window disc is deck.) WMA disc inserted DVD/VCR Combi receiver is in VCR timer mode Indicates the unit is radio mode. or a VCR timer recording is recording programmed. DVD to VCR copy is in progress. DVD/VCR Combi receiver is Indicates current surround mode. Recording a tape. Indicates the unit is playing back a tape recorded in Hi-Fi. MUTE indicator Programmed playback active A cassette is loaded in the VCR deck. DIGITAL PCM WMA PHOTO dts RADIO VCD II PROG PROLOGIC CHP/TRK Hi-Fi DVD MP3 TV RPTALLAB ST Total Indicates current track number chapter, or channel number. Indicates the unit is TV mode. MP3 disc inserted. Repeat playback mode indicators. VCD disc inserted. DVD disc inserted. Lights up when a JPEG disc inserted. 8 stereo broadcast is being received in radio mode. playing time/Elapsed time/ Frequency/remaining time/ Current deck status/Surround mode/Volume etc. indicators. Remote Control POWER OPEN/CLOSE, EJECT (Z) Switches DVD/VCR Combi receiver - ON and OFF. - 0-9 numerical buttons Selects numbered options in a menu. EJECT OPEN/CLOSE POWER PROGRAM Accesses Program or removes Removes Select the CD/DVD FM/AM VCR AUX the as program menu or a mark MARKER SEARCH on the AUX AV CLK/CNT - display. - option an in the menu. (b/B): TUNING PROGRAM CLEAR SOUND MODE AUDIO menu. REC/ITR Records normally or DISPLAY CLK/CNT PR/TRK/PRESET SET UP/ i DVD: Search backward*/go to beginning current chapter or track or go to previous chapter or track. VCR: Rewinds the or for fast TUNING- picture TUNING+ OK MEMORY /ENTER DVD: Search VCR: Advances the or (>) forward*/go to next chapter or track. tape in STOP mode for fast forward picture RETURN DISC MEUN PAUSE/STEP playback or recording temporarily/press repeatedly for frame-by-frame playback. PLAY Starts a DVD REC/ITR BACKWARD FORWARD Displays STOP PAUSE/STEP Selects PLAY menu on a DVD disc. (+/-) volume. point during playback. MARKER SEARCH menu. a subtitle language. MUTE MARKER SEARCH S-TITLE MUTE ANGLE REPEATA-B REPEAT TV/VCR CM SKIP SPEED TITLE ZOOM Momentarily silence the speaker of the DVD/VCR Combi receiver. TV/VCR Switch between your TV's tuner and the VCR's internal tuner. ZOOM Enlarges DVD video image. TITLE the disc's Title menu, if available. Displays RAMDOM REPEAT A-B/SPEED/REPEAT (G) angle into S-TITLE - playback. camera frequency SEARCH - ANGLE Selects Accesses Marks any (X) Pause radio stations MARKER PR/TRK/PRESET (A) Stops playback. a Adjusts speaker seconds. STOP -Enter VOLUME search. *Press and hold button for about two menu. DISC MENU seconds. FORWARD setup -Displays functions on the TV screen. -Acknowledges menu selection. search. *Press and hold button for about two remove or an the tuner. tape in STOP mode reverse SETUP/ i Access or language (DVD) (CD). OK/MEMORY/ENTER (z) (.) audio an audio channel Recording. BACKWARD BYPASS, LOGIC, PRO LOGICII (MOVIE, MUSIC, MATRIX) and 3D SURROUND. Selects activates Instant Timer AV3). or AUDIO RETURN setup AV2 source PRO To tune in the desired radio station. Removes the bands) AV Selects sound mode between Select programme of VCR or Tuner Adjusts manually the tape's picture - and AM SOUND MODE PR/TRK/PRESET(v/V): onscreen. listening choice. (FM (Tuner, AV1, (left/right/up/down) Selects the Selects the VCR deck's Switches among the clock, tape counter and tape remaining modes on the display. b/B/v/V Introducin screen. selecting the digital signal from DIGITAL AUDIO IN (OPTICAL) tuner memory. Accesses On-Screen the TV on or For menu. preset stations from the DISPLAY, to view (CD/DVD source Select the DVD/VCR Combi receiver's tuner on a output FM/AM Tuner select button track number Press to clear of CD/DVD/VCR select buttons VCR) menu. CLEAR Opens and closes the disc tray. Ejects the tape in the VCR deck. - if Repeat chapter, track, title, Repeats sequence. Selects recording speed. all. available. CM SKIP Fast forwards picture search seconds Play through 30 of recording. RANDOM tracks in random order. Note This remote control To use To use use the same buttons for VCR and DVD functions (ex. PLAY). the VCR, first press the VCR button. the DVD, first press the CD/DVD button. 9 Rear Panel AC Power Cord Plug ANT.IN into the power source. Connect the aerial EURO AV2 DECODER (VCR IN+OUT/DVD Connect to Set this jack. RF. OUT OUT) Box Top using Connect to a TV with RF cable. or FM ANTENNA CONNECTOR another video recorder. Connect the FM antenna to this terminal. 88 EURO AV1 AUDIO/VIDEO Connect to your TV set (VCR IN+OUT/DVD 4 888 OUT) another video recorder. or S-VIDEO OUT Connect to a S-Video (DVD OUT) Input on TV. FOR DVD VIEWING ONLY. SPEAKER CONNECTORS Connect the six supplied speakers to these terminals. DIGITAL AUDIO IN (OPTICAL) AM ANTENNA CONNECTORS Connect the AM antenna to this terminal. Do not touch the inner Electrostatic pins discharge may Remote Control of the cause press the buttons. Distance: About 6m Angle: remote on rear sensor unit. Remote control Operation Range Point the remote control at the remote remote the panel. permanent damage to the jacks and battery Detach the installation battery of the remote (20ft) from the front of the AAA AAA R03 sensor cover on the control, and insert (size AAA) batteries aligned correctly. with rear two and About 30° in each direction of the front of the sensor Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 10 Installation and TV & Decoder another VCR (or Decoder Setup (or another Connections) VCR) A InstaliodSeup D 88 4 888 S S-IN E V Rear of TV ? Make on of the following connections, depending capabilities of your existing equipment. one the Tips Depending ? your TV and other equipment you wish to connect, there are various ways you could on one of on Combi receiver. S-Video connection Connect the S-VIDEO OUT Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to Combi receiver to the S-VIDEO IN Make ed using ? the DVD/VCR Combi receiver is connect- sure directly to the TV. Select the correct AV input Do not connect your DVD/VCR Combi receiver to TV via your DVD/VCR Combi receiver. The DVD could be distorted by on the DVD/VCR jack on the TV (S). the copy The signal of S-VIDEO OUT jack will output only when the function mode is selected to CD/DVD. on your TV. image the S-Video cable jack Notes Caution ? jack from your indoor/ outdoor the rear panel of DVD/VCR (A) the connections described below. make the best connections. ? (AERIAL) Connect the aerial cable aerial to ANT.IN connect the DVD/VCR Combi receiver. Use ? Basic connections protection ? When you connect the DVD/VCR Combi receiver to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections. system. Basic connections 1. (AV) Connect the EURO AV1 AUDIO/VIDEO on the panel of the DVD/VCR Combi receiver to the scart input socket on the TV using a SCART lead (E). rear 2. You can VCR) connect such a Decoder (or another to the DVD/VCR Combi receiver (D). 11 Progressive Scan (ColorStream connection pro) Connect the EURO AV1 AUDIO/VIDEO socket on Rear of TV the DVD/VCR Combi receiver to the COMPONENT VIDEO INPUT(Y SCART to RCA Pb Pr) jacks on cable (Optional). If your television is the TV using VIDEO the COMPONENT INPUT high-definition or "digital ready" television, you may take advantage of the DVD/VCR Combi receiver progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD/VCR Combi a Y(G) Pr(R) Pb(B) receiver. Notes: ? ? Set the Progressive Mode to for progressive signal, "On" menu see on the setup page 24. Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit. 1) Remove any disc from the unit and close the disc tray. See that "NO DISC" is displayed on the display Rear of DVD/VCR Combi receiver window. 2) Press STOP and hold it for five seconds before output will be restored to the standard setting and a picture will once again be visible on a conventional analog TV or monitor. releasing ? Progressive it. The video scan video connections does not work with the (yellow VIDEO OUT analog jack). Caution: You must set the TV setup to use Y Pb Pr Select or option on the RGB signal from the EURO AV1 AUDIO/VIDEO socket. (See 12 menu Output "TV Output Select" on page 24.) Accessory Audio/Video (A/V) Connections to DVD/VCR Combi receiver Connect the AV3 jacks on the component, using the optional If the DVD/VCR Combi receiver to the audio/video out jacks on your accessory audio/video cables. auxiliary devices (e.g. DVD) input jack of the DVD/VCR Combi are equipped with OPTICAL OUT jack, connect them to to the corresponding receiver. DVD InstaliodSeup Player (or Digital Device, etc) OPTICAL OUT 88 4 888 Radio Aerial Connections Connect the supplied FM/AM the AM loop aerial aerial for listening to the radio. ? Connect to the AM aerial connector. ? Connect he FM wire aerial to the FM aerial connector. FM Wire aerial AM Loop aerial (supplied) (supplied) 88 4 888 Notes ? To prevent noise pickup, keep the AM loop aerial away from the DVD/VCR Combi receiver and other components. ? Be sure ? After fully extend the FM wire aerial. connecting the FM wire aerial, keep it to as horizontal as possible. 13 Speaker System Connection Connect the speakers using To obtain the best possible the cords. supplied speaker surround sound, adjust the speaker parameters; distance, level, Front Speaker (Right) Centre 88 etc. Front Speaker (Left) Speaker 888 4 Rear Speaker (Right Surround) Rear Speaker (Left Surround) Subwoofer Notes ? Be sure to match the speaker cable to the appropriate terminal the on components: + to + and -- to --. If the cables are reversed, the sound will be distorted and will lack base. ? If you front use speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers. ? Do not remove the front of cover supplied speaker. About Ferrite Core Be 1 to attach the ferrite sure (for connecting This ferrite to this core can core speaker reduce noises. a core stopper [a] of the ferrite core Wind the Subwoofer cable (A). ferrite core to open. on A 4. Close the ferrite B the ferrite once on 88 the 4 888 straight core on the ferrite core 3 (B). A until it clicks. Notes ? Take care ferrite ? not to comment.). 14 pinch the speaker cables between the cores. Attach the ferrite Make the as (B). 3. Pass the others a 2 2. Wind the Subwoofer cable three times core cables unit). How to attach the ferrite 1. Push the to the core near the unit (Refer to the fig.3 and B short length here as possible. Speaker Positioning In the of normal case position the 6 use front speakers (2 centre speakers, speaker, 2 and speakers rear subwoofer). If you want to a ? ? play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect subwoofer. Front speakers According to your listening position set up interval between speakers to 45 degree. the speakers for equal distance. And by hearing position set up the Centre speaker centre speakers The and front speakers the ideally are same height. But normally place it above or InstaliodSeup below the television. ? Rear speakers Place left and behind the right for surround sound position ers ? playback. and install them at towards a of wall In the case other, and set the a or or ceiling smaller rear listening For best These results, do speakers disperse speakers - 90 speakers rear ears. too far It is also effective atmosphere required behind the listening to direct the rear speak- the sound. size, if the audience is above 60 recreate sound motion and not install the above the level of the listener's to further room area. cm near to the rear than the listener's wall set the rear speakers opposite each ears. Subwoofer This can be placed in any front position. Subwoofer Centre Front Rear Speaker Speaker (Left) Front Speaker (Right) Rear Speaker (Right) Speaker (Left) Speaker Positioning Example 15 Mini Glossary for Audio Stream & Surround mode 3D SURROUND This unit Allows you to discrete channels of enjoy 5.1(or 6) produce a 3D Surround effect, using 3D Surround Sound technology, which simulates multi-channel audio playback from two conventional stereo speakers instead of the five or more speakers normally required to lis- high audio from DTS program sources such as DVD and compact discs, etc.bearing the trademark. quality digital discs, DTS Digital Surround delivers up to 6 channels of transparent audio(which means identical to the original masters) and results in exceptional clarity throughout a true 360 degree sound field. The term DTS is Technology, Technology, a can ten to multi-channel audio from a home theatre. This feature works with DVD discs encoded with Dolby Digital Dolby Pro Logic and audio tracks. trademark of DTS LLC. Manufactured under license from DTS BYPASS LLC. Software with multichannel surround audio according The Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital promark, you can gram source. If you play DVDs with enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. " " to the way it was signals is played recorded. Sound Mode You can enjoy surround sound simply by selecting the pre-programmed sound fields according one of to the program you want to listen to. Press SOUND MODE Use this mode when playing nel which carries the " effect of being effect with DOLBY in " PRO which LOGIC can or 2 chan- Dolby Digital or mark. This mode movie theatre a intensity an movie provides the live concert house-an only be obtained SURROUND. The through effect of mode you want below. repeatedly until the sound appears in the display window as the front/back/left/right movement of the sound image, as well as the sense of fixed position in the sound image, is much clearer and more dynamic than before. Each time you press SOUND MODE button, the sound mode is changed in the following order; PRO LOGIC → → PL2 MOVIE 3D SURROUND → → PL2 MUSIC → PL2 MATRIX BYPASS When DVD is inserted. (II) Dolby Pro Logic You II creates five full-bandwidth nels from two-channel sources. This is done output chan- using an advanced, high-purity matrix surround decoder that the any spatial properties new sounds or of the original recording extracts without adding tonal colorations. MOVIE mode: The Movie mode is for use with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that approaches the change the stream of DVD (Dolby Digital, DTS, PCM, etc) by pressing the AUDIO button on the remote during playback. Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is can used. Each time you press AUDIO button, the sound mode of DVD is changed as the following order; →→→ quality of discrete 5.1-channel sound. MUSIC mode: The Music mode is for and provides a with any stereo music recordings, wide and deep sound space. The Music mode use For your reference ? The DVD/VCR Combi receiver memorizes the includes controls that allow the sound to be tailored to individ- last mode ual settings listening tastes. ? MATRIX mode: The Matrix mode is the same as the Music mode the directional enhancement to enhance mono logic is signals by making except that turned off. It may be used them seem "larger." The disturbing surround signals ultimate "cure" for poor FM stereo force the audio to mono. from - decoder. The logic reception may a be simply individually. You can identify the encoding format of program software by looking at its packaging. Dolby Digital discs are labeled with the logo. Dolby Surround encoded programs are labeled with the logo. DTS Digital Surround discs are marked with DTS. - Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause for each source - to Note ? When you play sound tracks with 96kHz frequency, the output signals (sampling frequency). 16 sampling will be converted to 48kHz Before Operation-VCR part Using your VCR for the very first time For the that you have just connected your video recorder for the very first time. In this case the video recorder is on after mains following steps we do assume connection. You should not touch any buttons the connected TV you will now see. Note - If this 1. Select the does not appear, your video menu recorder yet. On was programmed already. country according to your area with FandG. "A": Austria, "B": Belgium, "CH": Switzerland, "D": Germany, "DK": Denmark, "E": Spain, "F": France, "I": Italy, "N": Norway, "NL": Netherlands, "P": Portugal, "S": Sweden, "SF": Finland, "OTHERS" A BD CH NN L DK PSS F E I OTHERS Pr-12 ACMS 2. Press OK to start the automatic storing channels of the TV stations in your 01 Pr-12 S C02 00 of the area. TF1 E ACMS 17 the clock Setting To set the colour Manually The clock in your VCR controls time and date settings for your VCR. automatically during ACMS (Automatic Channel Memory System) when The clock is set VCR detects Teletext channel that broadcasts a signal. your a 1. Press i. 2. The main 3. Press 1 or 2 to select the SYSTEM and press OK. 4. Press 3 or 4 to select If the broadcast signal is weak will require setting the clock will not be set and will appear on the TV according AUTO: automatic colour screen. to the COLOUR selection, PA L: PA L recordings SECAM: SECAM recordings MESECAM: MESECAM recordings. Press i. Press 1 menu system used. manually. 1. system or 2 to select TIME DATE. Press OK. The auto mode adjust pressing 3 manually. or can be set to "OFF" by if you want to set the time 4 Press OK. VCR REC Dr. NIC fOSD ON OFF 5. AUTO ADJUST : ON TIME DATE HHMNDDMMYY :. - - -- -- -- --- . TIME DATE 2. Use the numbered buttons to alter the on the remote control HOURS, MINUTES, DAY, MONTH and YEAR. Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. The of the week will appear when you enter the year. day automatically HHMNDDMMYY 8 :. 00101 . THU TIME DATE 18 3. If you make a mistake press 1 correct details. 4. Press i. or 2 and enter the Press i to remove the menus from the TV screen. How to using This VCR easily be programmed by using displayed on screen. the menu can menus The the main controlled from the Remote menus are Control Handset. 1. Switch pressing 2. your TV set and video recorder the POWER button. on by will appear menu on the TV Tuning Automatically If the TV broadcast signal is weak your VCR may not detect the necessary information and will not be able to store them correctly. To overcome this turn to the MANUAL TUNING problem please section Press i button. The main in TV Stations page 20. on 1. Press POWER to turn 2. Press i button. your VCR. on screen. The main Press 1 will appear on the TV 2 to select the ACMS. menu or screen. Press OK. VCR PSET R Pr-12 ACMS TIME DATE SYSTEM Dr. NIC fOSD ON OFF 16:9 4:3 DECODER OPR A 12 REC REC Timer recording setting (see p. 29). PR SET Manual tuning setting (see p. 20). ACMS ACMS (Automatic Channel Memory System) (see p. 19). TIME DATE Date & clock setting (see p. 18). SYSTEM To set the Colour TV System (see p. 18). Dr. To check a problem with your VCR (see p. 42). F. OSD ON/OFF To display the operational - PSET R TIME DATE DK E I SYSTEM NN L Dr. PSSF OTHERS Pr-12 NIC fOSD ON OFF Pr-12 BD CH VCR 16:9 4:3 DECODER Pr-12 OPR ACMS - - 3. - - mode of your VCR tuning has finished. If the clock please see "Setting the clock manually" on p. 42). To select the aspect ratio of your TV DECODER OPR O NIC - - p. To - pay-TV decoder (or Satellite) with your VCR (see p. 43). To improve the playback picture (see p. 27). sound (see or 00 TF1 02 C03 00 FR2 03 C04 00 FR3 E digital 43). 4. The TV STATION TABLE will appear when is complete. Press i to save your tuning settings. can Press 1 and 2 to select the desired Press OK and press 3 4. C02 Pr-12 change the menu language on the DVD setup menu. (See the Menu Language on page 23.) 3. is wrong page 18. ACMS deactivate the NICAM p. 01 S Tip: You when 43). use a To activate automatically automatic (see (see 2 to select COUNTRY. process. The VCR's clock will be set - - or (A:Austria, B:Belgium, CH:Switzerland, D:Germany, DK:Denmark, E:Spain, F:France, I:Italy, N:Norway, NL:Netherlands, P:Portugal, S:Sweden, SF:Finland, OTHERS) Press OK again to start the automatic tuning - 16:9/4:3 Press 1 Press i to remove the or menu. 4 to select. menus from the TV screen. 02 C03 00 FR2 03 C04 00 FR3 04 C05 00 ARTE 05 C06 00 RTP1 06 C07 00 RTP2 07 C08 00 RTPAF 08 C09 00 RTPAZ PSET R MOVE : DELETE : , 19 in TV Stations Tuning In certain areas of the 5. Manually Searching will stop when it locates country broadcast signals Press 3 or 4 to correctly. adjust. PR CH 09 C10 You must tune in these weaker broadcast manually Press 1 CHANNEL/CABLE 6. will appear on the TV 2 to select the PR SET. menu or STATION : AV P SET R Press i. The main MFT in order for your VCR to store them. 1. station. Press 2 to select MFT. may be too weak for your VCR's automatic tuning process to find or assign TV stations stations a Press 2 to select STATION The TV station CH MFT STATION 00 PR-01 01 that you may name your TV station. Press OK. screen. Press OK. PR so list will appear. name PR CH MFT 09 C10 00 VCR Pr-12 REC fOSD ON OFF ACMS TIME DATE SYSTEM Dr. NIC 16:9 4:3 DECODER CHANNEL/CABLE OPR : PSET R AV PSET R 7. 2. Press i. that you want to tune (for example, 02 C03 00 FR2 03 C04 00 FR3 04 C05 00 ARTE 05 C06 00 RTP1 06 C07 00 RTP2 07 C08 00 RTPAF 08 C09 00 RTPAZ P SET R MOVE : DELETE : PR 09). station a name from the list. (Standard stations) or S - You S41. PR CH MFT 09 C10 00 change a TV station name manually than using the "standard" names. Press 3 or the station new Press 1 to tune with the numbered buttons characters. or use 3 or 4 or 4 to select letters and numbers for name. 2 to PR PR CH 09 move back and forth between Press OK. station. required 7. the list do not press can Enter the channel number of station that you want to find the stage on Press G. (Cable stations): C69, S01 isn't , rather Press AV to select C name PSET R Press OK. - E to select If your station OK, but go to 8. C02 or Press OK to select it. The station table will appear. Press 3 or 4 to select the programme number 3. Press D MFT STATION -- ---- CHANNEL/CABLE : C09 CH MFT C10 00 STATION PSET R AV PSET R 9. 4. Press OK and select the "PAL" pressing or 3 or 4. "SECAM" by Press i, confirm the station Press i again. Yo ur new TV station has now placement. been tuned into your VCR. If you wish to stages 1 9. manually tune other stations - PR CH MFT 09 C10 00 STATION 10 11 12 13 14 PSET R 15 16 PSET R 20 -- -- ----- -- -- ----- -- -- ----- -- -- ----- -- -- ----- -- -- ----- -- -- ----- MOVE : DELETE : , repeat the order of TV Stations Changing After tuning TV stations into your VCR you may wish to change the order in which they are stored without having to retune them against! The instructions given on this page will show you how you can simply move them into your desired order. 1. Deleting After tuning TV stations into your VCR you may wish to delete a station. The instructions given on this page will show you how easily delete any unwanted TV stations. 1. Press 1 Press i. The main Press i. Press 1 The main will appear on the TV 2 to select the PR SET. menu or TV Stations will appear on the TV 2 to select the PR SET. menu or screen. Press OK. screen. Press OK. PR CH 01 MFT STATION 00 PR-01 VCR Pr-12 PR CH MFT 01 REC STATION TIME DATE SYSTEM ON OFF Dr. CHANNEL/CABLE NIC fOSD PR-01 00 ACMS 16:9 4:3 DECODER : AV PSET R OPR VCR Pr-12 REC ACMS SYSTEM Dr. CHANNEL/CABLE NIC fOSD ON OFF TIME DATE 16:9 4:3 DECODER : AV 2. PSET R OPR Press i. Press 3 2. Press i. Press 3 or 4 to select the you want to delete. 4 to select the or you want to Press 2. move (for example, PR 03) programme number (for example, 02 C03 00 PR-02 03 C04 00 PR-03 04 C05 00 PR-04 05 C06 00 PR-05 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 PSET R programme number MOVE : DELETE : PR 03). 02 C03 00 PR-02 03 C05 00 PR-03 04 C06 00 PR-04 05 C04 00 PR-05 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 P SET R 3. : DELETE : , Press 1. After , MOVE a short while, the selected station will be deleted. 01 C02 00 02 C03 00 PR-01 PR-02 03 01 C02 00 PR-01 02 C03 00 PR-02 C06 00 PR-04 C04 C07 00 00 PR-05 PR-06 04 C05 00 PR-04 05 00 PR-05 06 C06 C07 00 PR-06 07 C08 00 PR-07 04 05 06 08 C09 00 PR-08 07 C08 00 PR-07 08 C09 00 PR-08 PSET R MOVE DELETE PSET R 3. Press 3 4 to select the or you want to move to programme number (for example, PR 4. 05). Press i to remove the : : menus , from the TV If you wish to delete other TV stations stages 1 3. screen. repeat - 01 C02 00 PR-01 02 C03 00 03 C05 C06 00 PR-02 PR-04 00 PR-05 04 05 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 PSET R 01 C02 00 PR-01 02 C03 00 PR-02 04 05 C04 00 PR-04 C07 00 PR-05 06 C08 00 PR-06 07 C09 C10 00 00 PR-07 PR-08 08 MOVE: 4. The selected programme will be moved to the new programme number. If you wish to move other TV stations repeat stages 1 Press i to DELETE PSET R Press OK. remove the menus from the TV 01 C02 00 PR-01 02 C03 00 03 00 04 C05 C06 00 PR-02 PR-03 PR-04 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 PSET R MOVE : DELETE : How to - 4. screen. selecting Stored Stored TV stations can : , TV stations: be selected in either of two ways. Press PROG. 3 or 4 to select different stations that are tuned into your VCR. You may also directly select stations using the numbered buttons on the remote control. , 21 Before Operation-DVD part On-Screen You Display the general playback status on the TV screen. Some items can be changed using the menu. To use the on-screen display: display can 1. Press DISPLAY 2. Press v / V to select The selected item is Press b / B to 3. item. inputting change the title the Number For number). also functions, some setting. provide 0:20:09 Display only b/Bor mode language AUDIO OFF ABC Display only all of the features Page (or Angle) b/Bor ANGLE or ? If no button is pressed for 10 seconds, display disappears. screen the on- Playback Status/Restrictions Repeat title 1/9 Repeat sequence Enter Marker MARKER SEARCH 123456789 Selection Method Items Track Number Marker Search Resume Action a 1/3 Example: On-Screen Display during playing VCD TITLE A-B play prohibited menu from this or (or PBC 1/3 ENTER Numbers 0:20:09 STEREO Sound Example: On-Screen Display during playing DVD Video Selection Method 1/3 b / B, Numbers ENTER Chapter Number 1/12 0:20:09 Audio language and Digital Audio Output mode Subtitle Angle Sound 22 b / B, Numbers ENTER Time search language ENTER b/Bor Audio Channel Title Number B, Numbers mode) Time search point b / not available Items B,Numbers ENTER DVD Audio Subtitle Notes: Some discs may not shown below. b / Time search Output B,Numbers ENTER Track Number setting. You can appropriate (e.g. press ENTER to execute the ? b / highlighted. the number buttons if use Selection Method Items Group during playback. an Example: On-Screen Display during playing DVD Audio Numbers, ENTER b/Bor AUDIO 3D SUR b/B Example: On-Screen Display during playing divx movie disc Selection Method Items Track Number 1/3 b / B,Numbers ENTER Time search 0:20:09 Audio language and Digital Audio Output mode Numbers, ENTER b/Bor 1 MP3 AUDIO AUDIO Subtitle ABC 1 ENG language ABC ENG b/Bor S-TITLE b/Bor S-TITLE 1/3 b/Bor ANGLE 3D SUR b/B Sound 3D SUR b/B Initial LANGUAGE Settings LANGUAGE By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 23 to 26. To display display the Original Disc Subtitle Off Disc Menu Original 2. Use v / V to select the desired Setup menu appears. move a Original: option then press to the second level. The screen shows the selected item, Use v / V to select the second desired press B to Select language for the Setup menu and as well option as then DVD-V DVD-A Use v / V to select the desired 5. Press SETUP disc was Refers to the original language track in which the recorded. Other: To select another language, press number buttons then ENTER to enter the corresponding 4-digit number according to the language code list in the reference chapter. If you enter the wrong language code, press CLEAR. to the third level. 4. InstaliodSeup on-screen language you prefer for the audio (disc audio), subtitles, and the disc menu. Press SETUP. The alternate Language Select the 1. setting for setting(s). Menu Disc Audio / Subtitle / Menu Operation the current Select display. To go back to the previous level: Press b on the remote control. move Move screen. To go to the next level: Press B on the remote control. 3. Disc Audio A second press of menu. SETUP will take you back to initial B to English Language and exit the Menu: Press SETUP to General Menu then press ENTER to confirm your selection. Some items require additional steps. or setting PLAY to exit the Setup menu. 23 5. DISPLAY Pressing scan DISPLAY TV 16 Aspect Display Mode Scan Progressive TV Output Select :9Wide Caution: Off Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to RGB On in error, you must reset the unit. 1) Remove any disc from the unit and close the disc tray. See that "NO DISC" is displayed on the display window. Select Press STOP and hold it for five seconds before releas- 2) TV DVD-V Aspect 4:3 : Select when DVD-A a ing it. The video output will be restored to the standard setting and a picture will once again be visible on a conventional analog TV or monitor. standard 4:3 TV is connected. 16:9 Wide: Select when a 16:9 wide TV is connected. TV Display Display DVD-V Mode Mode setting DVD-A works only when the TV Aspect LetterBox: Displays a wide picture with bands upper and lower portions of the screen. on the Panscan: Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. TV connection Output Select options according to the type. YPbPr: When your TV is connected with the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on this unit. RGB: When your TV is connected with the SCART (RGB signal) jack. AUDIO Scan Scan Video the Progressive provides highest quality pictures with less flickering. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On. To turn On Output Select Set this unit TV mode is set to "4:3". Progressive Progressive mode. Widescreen Move ENTER will set this unit to progressive Each DVD disc has variety of audio output options. options according to the type of a Set this unit AUDIO audio system you use. AUDIO 5.1 scan: Select Speaker Setup DRC On Vocal On Connect component out of this unit to the input of your monitor/television, set your television or monitor to Component Input. 1. Select "Progressive Scan" on the DISPLAY menu Move then press B. DISPLAY TV Mode Progressive TV DVD-A Speaker Setup DVD-V Select speaker settings, including volume balance and distance, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 39.) 5.1 Aspect Display Output Select Scan On Off Select Dynamic Range Control (DRC) DVD-V DivX DVD-A Prev. 2. Select "On" using Move Enter the v / V buttons. 3. Press ENTER to confirm your selection. The confirm menu will appear. Note: If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD Player. 4. When the confirm Cancel is to 24 With the DVD highlighted highlight Enter. as appears on your screen default. Use the b button can hear a program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). This allows you to listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect. Vocal menu format, you DVD-V Set to On playing. only DVD-A when a multi-channel karaoke DVD is The karaoke channels normal stereo sound. on the disc mix into OTHERS The DivX(R) PBC, Auto Play and DivX(R) VOD settings can be changed. You VOD DivX display the DivX DRM (Digital Rights Management) Registration code for your unit only. can OTHERS PBC Auto On Off Play DivX(R) DivX(R) Your Select VOD Video On Demand registration To learn code is : XXXXXXXX visit more www.divx.com/vod Move PBC Set (Done) Select Playback Control (PBC) On: Video CDs with PBC Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rent an to On are or Off. encrypt played according to the PBC. Off: Video CDs with PBC are played the same way as You Display View set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted. Play mode is set to play can of watch the file. back the title longest playback automatically. On: Auto Play function is active. Off: Auto Play function is not active. Play function may not work for DivX(R) VOD Rental This rental has 3 views left. Do your want to On, this DVD player will search for title that has the then the number which you options DVD-V can If Auto file. If you rent the DivX VOD file, it has several viewing limits as shown below. ? Play move Notes: Audio CDs. Auto InstaliodSeup The VCD use one of you 3 views now? time and (Yes) (No) ? The rental has been expired. Notes: The Auto some DVDs. Rental Expired (Done) ? Display the authorization error. Authorization Error This player is not authorized to play this video. (Done) 25 LOCK Password (Parental Control) You LOCK Rating Unlock Password New Country enter can 2. Follow step "New" is Move DVD-V Input Select for children to view. that may not be suitable of these discs contain scenes Many parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the country. Some discs offer suitable more scenes as an alternative. The as control feature allows you to block to scenes below the rating you input, there by 4-digit code, again to verify. it If you 1. Press SETUP to 2. Input the 6-digit display 3. Enter a new code Enter the code of the "Rating" on the LOCK menu then were DVD-V Code Rating, Password and Country Code features, you must input the 4-digit security code you created. If you have not yet entered a security code you are prompted to do so. access rating a from 1 to 8 1-8: tions and using Rating one (1) rating eight (8) is If you select and the disc Setup clear it using menu. security the least restrictive. not active in full. Notes: rating for the player, all disc scenes with rating or lower are played. Higher rated are not played unless an alternate scene is a on as described above. DVD-A country/area whose standards disc, based on the chapter. the disc. The alternative must have the rating or a lower one. If no suitable alternative found, playback stops. You must enter the 4-digit password or change the rating level in order to play same is the disc. 4. Press ENTER to confirm your rating press SETUP to exit the menu. selection, then Select "Country Code" on the LOCK then menu press B. 2. Follow 3. Select the first character 4. Shift the second 5. has the most restric- unlock, parental control is plays 1. the v / V buttons. Unlock available the can the Input a 4-digit code and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR. scenes menu. used to rate the DVD video list in the reference If you set the same or then press ENTER. number "210499" and the 1. Select Rating then press B. (Rating). "Change" If you forget your security code you the following steps: Country 3. Select menu forget your Security Code your children from being able to view material you believe is unsuitable. press B. 26 shown left new preventing 2. To the LOCK code is cleared. parental access 2 on 4. Press SETUP to exit the DVD-A Some movies contain change password. highlighted. 3. Enter the Rating or 1. Select Password FR Code (Security Code) step 2 as shown left (Rating). using v / V buttons. using B button and select character using v / V buttons. cursor Press ENTER to confirm your selection. the country code Operation 5. Slow motion Playing a You will be able to load and only Tape eject video cassettes when your DVD/VCR Combi receiver is plugged into the mains. Your DVD/VCR Combi receiver may also playback recordings from Getting a better picture When a NTSC tapes (on PAL TV). the playback started, automatic tracking function works to get the best possible picture automatically. If the quality of the recording is poor, repeatedly press 3 or 4 on the remote control or press PROG. 3 or 4 on the front panel to manually adjust the tracking until any distortions have been removed. Press numbered 0 1. Make on back tracking the remote control to on again. sure this book. slow motion and During appear the on on into your DVD/VCR Combi receiver. The video cassette should have the window side facing up and facing arrow away from you. 2. Press PLAY to start playing your tape. video cassette which has had its If you load a record protection tab cassette will start picture according If distortions can them with D or be in the seen picture, reduce E. 6. Press STOP to end Operation playback. Press EJECT. tape is reached, your DVD/VCR Combi receiver will stop playback automatically, rewind, stop, eject the tape. (Commercial Message) Skip: This feature enables you during playback of a tape to skip a commercial break in a few seconds, then resume normal playback. While tape is playing press CM SKIP on the remote control to skip commercial (or another programme material). Repeatedly press CM SKIP to skip: 1 Press 30 seconds removed, playback of the automatically. 2 Press 60 seconds 3 Press 90 seconds 4 Press 120 seconds Your DVD/VCR Combi receiver will 5 Press 150 seconds 6 Press 180 seconds the tracking to give the best 3. Press PAUSE/STEP to still Press PAUSE/STEP automatically picture quality. picture. repeatedly to advance a OPR the tape frame by frame. If you press FORWARD, the picture will be slowed down at about 1/19 times the normal playback. Tapes paused for up to 5 minutes. After 5 minutes your DVD/VCR Combi receiver will stop the tape to prevent damaging the tape or your can be DVD/VCR Combi receiver. Still be to the status of tape. AUTO TRACKING adjust shuttle, the noise bars may CM your TV. Press POWER to turn on your DVD/VCR Combi receiver. Insert the video cassette the shuttle, press the If the end of the that you have correctly connected your DVD/VCR Combi receiver as described earlier in Turn To switch off the slow motion and desired function. cassette is inserted and switch automatic playback, Shuttle : During playing back or still picture press F or G. You can reach the following playback speeds. (-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay) picture quality improved slightly by pressing 3 or 4. 4. Press PLAY to continue playing can (Optimum Picture Response) This feature automatically improves playback picture quality by adjusting your DVD/VCR Combi receiver to the condition of the tape. 1. Press i. 2. Press 1 2 to select OPR. or 3. Press ENTER. your tape. Picture search: During playing back press either FORWARD or BACKWARD and this will enable you to rapidly wind the tape (7 times normal playback) and where you are on the tape. Logic search: During fast forwarding f ON OFF 16:9 4:3 VCR 12 12 MS TIME DATE Dr. NIC - DECODER SYSTEM OPR i OPR see rewinding press and hold FORWARD or BACKWARD the picture will be played back at 7 times normal playback speed. or OFF SOFT SHARP 4. Press 3 or 4 repeatedly to select: OFF, SOFT or SHARP. Please note you may playing a only set OPR when tape. 5. Press i return to screen. 27 Instant Timer 5. Recording (ITR) Instant Timer ately for runs out. a Your DVD/VCR Combi receiver 6. E- 180 will record up to 180 minutes using Standard Play (SP); using LP you will be able to record up to 360 minutes. Please note there will be a and sound LP. 1. Make quality when using slight loss in 7. picture Insert protection 3. up and the Press v arrow facing away from you. V to select the programme number you wish to record. or You may also directly select programme number using the numbered buttons on the remote control. 4. If you wish to record directly from the SCART or RCA sockets repeatedly press AV until the socket you wish to record from is will be tape is paused. After 5 minutes your DVD/VCR Combi receiver will stop recording to prevent damaging the tape or your displayed. displayed from EURO AV1 SCART socket of your DVD/VCR Combi receiver. AV 2 for recording from EURO AV2 SCART socket on the recording of your DVD/VCR Combi receiver. AV 3 for recording from VIDEO IN and AUDIO IN on the rear the front of your DVD/VCR Combi receiver. (Left 28 & rear Right) sockets on when a DVD/VCR Combi receiver. 8. Press STOP to end recording. Press EJECT. EJECT will appear seconds. on the TV screen for few a Notes: If you do not wish to record on a tape (this can happen quite easily by accident!) remove the protection tab on the back edge of the video cassette. It is possible to record on a video cassette record protection tab removed by covering with self adhesive AV 1 for unwanted pause mode and ITR is cancelled. Tapes can be paused for up to 5 minutes; RECP tab into your DVD/VCR Combi receiver. The video cassette should have the window side facing recording If you press PAUSE/STEP DVD/VCR Combi receiver will enter the record your VCR. video cassette with a Press PAUSE/STEP to avoid recording. during ITR, this this book. 2. recording. Press PAUSE/STEP to continue that you have correctly connected your DVD/VCR Combi receiver as described earlier in on Press REC/ITR to start much as scenes. sure Press POWER to turn sound press will increase the record time by 30 minutes until you reach a maximum of 9 hours. (LP) an SP will or RECORD will appear on the TV screen. Press REC/ITR several times. Each successive incorporates Long Play which enables you to record up to twice the amount of time on a video cassette. For example Long Play produce improved picture and quality, however LP will provide twice recording time as SP. Your DVD/VCR Combi receiver allows you to make recordings using a variety of simple methods: Recording (ITR) start recording immediset period of time or until the video cassette Press SPEED if you wish to record in Standard Play. with the the hole tape. Remember you can record one programme while watching another by starting your instant recording, press TV/VCR to appear TV indicator in the display window and then selecting a different channel on your TV. recording using On Display Timer Screen You may set up to seven timer record events within one month of the current date. PR DATE FR2 16 TIME 190020 :: SP ~ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- SP SP SP SP SP SP Note: Before setting the timer make sure that you have set the VCR clock correctly and you know which stations you have tuned TV stations on your VCR. 1. 2. 3. Insert a video cassette with protection tab into your VCR. The video cassette should have the window side facing up and the arrow facing away from you. Press 3 or 4 to switch VPS/PDC on or off. Press 2 to select the recording speed. Press 3 or 4 to select the desired tape speed (SP, IP, Press OK to start setting the timer record event. If all timer record events are full press 3 or 4 to select the event that you wish to remove and replace. Press 1 to delete the event. DATE or LP). IP mode determines how much tape is left and switches speed from SP to LP, if necessary, to complete recording the program. IP mode is not selected when VPS/PDC is ON. Press i. Press 1 or 2 to select REC. Press OK. PR 4. 7. PR DATE TIME FR2 16 19002000 :: ~ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- SP SP SP SP SP SP TIME -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ SP -- SP -- 8. Check that the timer event details are correct. Press i twice. If PLEASE CHECK is displayed, you have entered incorrect and will need to re-enter the data. Press POWER to switch your VCR Standby. will appear in the display window while your VCR waits to make the recording. To watch a DVD during timer recording standby mode, press POWER and DVD to switch to DVD mode. 9. Press STOP to end SP -- SP -- SP -- SP -- SP -- Press the numbered buttons to enter the station that you wish to record. When selecting stations 1 9, press 0 first, then the channel number; for example Stations 3 03. You may also select Channels by pressing 3 or 4. Once selected press 2. If you wish to record from AUDIO IN (L/R) and VIDEO IN on the front or from the EURO SCART sockets on the back of your unit, press AV to select for correct display (AV1, AV2 or AV3). - - PR 5. DATE -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- -- SP SP SP SP SP SP SP Press the numbered buttons to enter the date of the programme. If you press OK before entering the date you may select one of the following automated recording features. Press 1 or 2 to select, then press OK to confirm. DLY To record every day (except Saturday and Sunday) at the same time. SU~SATo record at the same time every week. PR DATE FR2 TIME -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 6. TIME :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- SP SP SP SP SP SP SP SUMOTUWETHFRSA -- -- :: -- -~ -- Press the numbered buttons to enter the recording start and end times of the programme that you wish to record. Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. You may also select the the start and end times by pressing 3 or 4. recording. Notes: If at a later date you wish to delete or change any of the settings in timer event memory you may do so without having to enter all the timer event information again. Simply display the timer event screen. Press 3 or 4 to select the event that you wish to delete or change. Press 1 to delete the event...or Press OK to change; then press 1 or 2 to select; Station, Date, Start and End times and LP. Press or 4 to enter the correct information. 3 If Timer record events Overlap... Make sure that the preset times of the timer recording events do not overlap. If they do, the earlier programme will always be given priority. Example: Programme 1 is programmed to start at 16:00 and end at 17:00. Programme 2 is programmed to start at 16:30 and end at 17:30. (In this case, Programme 1 will be recorded in its entirety, but only the last 30 minutes of Programme 2 will be recorded.) Video Programme System (VPS) The Video Programme System (VPS) ensures that the TV programmes that you have programmed for timer recording will be recorded exactly from their beginning to end, even if the actual broadcasting time differs from the scheduled time due to delayed start, or if the programme is extended beyond its scheduled time. Also, if a programme is interrupted, for example, if a news flash is inserted, the recording will also be interrupted automatically and resumed when the programme continues. The VPS signal is broadcast by the TV station and this controls the timer in the video recorder. VPS should be set ON for all timer recordings from TV stations broadcasting these signals. It should be set OFF for all timer recordings from TV stations that are not broadcasting these signals. *** The similar system PDC, which is used in the time being in the Netherlands, can also be used with your new video recorder. 29 If Timer record events Overlap... Change (Deleting) Do not overlap programmes, since overlapping portions of the conflicting programmes will not be recorded. Earlier recording times have priority over later recording times as shown in the diagram. If at the Timer Programme later date you wish to delete or change any of the settings in timer event memory you may do so a without having to enter all the timer event information again. Simply display the timer event screen. Press D E to select the event that you wish to delete change. Press F to delete the event...or or Example: Programme 1 will be recorded in its the last 30 minutes of Programme entirety, but only 2 will be recorded. Press OK to Station, Date, Press D PROGRAMME 1 17:00 16:00 17:30 16:30 PROGRAMME 2 (This portion If two programmed will not be timer recorded.) recordings overlap at 00:00 a.m., programme 2 will not be recorded. 30 midnight or then press F or G to Start and End times and LP. change, or select; E to enter the correct information. Playing DVD a or General Features Video CD Note: Playback Setup Turn 1. on Unless stated the TV and select the video input source connected to the DVD/VCR Combi receiver. Turn 2. the audio system (if applicable) and select to another TITLE Combi receiver. When disc has Press OPEN/CLOSE to open the disc tray and load your chosen disc in the tray, with the play- another title. Press DISPLAY while input source connected to the DVD/VCR back side down. Press OPEN/CLOSE to close the 4. starts If automatically. playback tray. Playback does not start, use the remote control. Some features may also be available on the Setup menu. Moving the 3. on otherwise, all operations described a stopped then the b / B to move You more than one title, you to can move playback is appropriate number (0-9) or use to another title. play any title by inputting playback is stopped. can its number while press PLAY. In some cases, the disc menu might appear Moving to another CHAPTER/TRACK When title instead: Use the bBvVbuttons to select the title/chapter view, then press ENTER to start. Press TITLE or DISC MENU to return to the menu you want to screen. a disc has er disc has on a more than chapter/track than track, you one chapter can move or a to anoth- follows: briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. ?To go directly to any chapter during DVD playback, ? Press . as one more > or ? Use the 1 2 3 4 buttons to select want, then press ENTER to view the option option. an you press DISPLAY and press v / V to select the chapter/track icon. Then, input the chapter/track Use the number buttons to select the track you want to view and press RETURN to return to the Menu menu screen. settings and operating procethe dures may differ. Follow the instructions on each menu screen. You also may set PBC to Off (See "PBC" on page numberoruseb/B. Search 1. 25). ? The If parental control is set and the disc is not within the rating settings you must input the password. (See "Lock Menu" on page 26.) 2. player. (five). ?To watch a The region code for this DVD during timer player player will now go into SEARCH mode. Press and hold . or > repeatedly . to select required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). is 5 recording standby mode, press POWER and DVD mode. > for about two seconds the DVDs may have a region code. Your player does not play discs that have a region code different from your or during playback. Notes: ? Press and hold . 3. To exit SEARCH mode, press PLAY. to switch to DVD Changing the Audio Channel Press AUDIO ferent audio repeatedly during playback to hear channel (Stereo, Left, or Right). a dif- 31 Still Picture and Frame-by-Frame Playback Repeat You Press PAUSE/STEP 1. the remote control during playback. Advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly. To exit still motion 2. on mode, Press Press PAUSE/STEP DVD Video Discs press PLAY. ? now go into PAUSE mode. Press . 2. The > or during Use the . or t 1/16, t 1/8, t 1/4 T 1/16, T 1/8, T 1/4 To exit Slow Motion 3. ? Title: ? Off or t 1/2 or T 1/2 required speed: (backward), or (forward). ? All ? Off ? mode, press PLAY. in reverse is not desired - current title. play repeatedly. Repeat Track/All/Off repeats the current track repeats all the tracks on a disc. : : does not : play repeatedly. - Repeat Track/Group/Off Track: repeats the current track. Group: repeats the current Group. Off does not : play repeatedly. Notes: ? On on playback does not : Track ? Note: Slow motion repeats the ? ? > to select the a - DVD Audio Discs pause. will enter SLOW mode. player disc. Repeat Chapter/Title/Off Chapter: repeats the current chapter. Video CDs (X) during playback. The DVD/VCR Combi receiver will title/chapter/all/track on a REPEAT during playback to select a repeat mode. Slow Motion 1. play can Video CDs and DivX Discs. Video CD with the "PBC" with possible a setup on menu page PBC, you to use the must set PBC to Off repeat function (See 25). If you press > once during Repeat Chapter playback, the repeat playback cancels. ? (Track) Random 3D Surround Press RANDOM 1. The unit during playback or in stop mode. automatically begins random playback and RANDOM appears Press RANDOM 2. again the TV on screen. to normal. Tip: . By pressing or > the unit selects another Random during Random playback, title (track) and resumes To setup 3D surround effect that simulates multi- speakers (instead of the five+ speakers normally required for multi-channel audio from a home theater system). 1. Press DISPLAY 2. Use 3 or playback. during playback. 4 to select the sound The sound Note: a a channel audio from two stereo 3. On produce option will be option. highlighted. Use1or2totoselect"3DSUR". To turn off the 3D Surround Video CD with menu to use PBC, You must set PBC to Off the random function (See on "PBC" on effect, select "Normal". the page Time Search 25). To start Repeat To 1. 2. 3. 32 A-B repeat a 1. starting point. again at your chosen "A B" appears briefly on the TV repeat sequence begins. again " A * " 2. to cancel. 3. end point. screen on Press DISPLAY the disc: during playback. The elapsed playing time. time search Press v / V to select the time clock icon and "-:--:--" appears. screen. Press A-B Press A-B at any chosen time box shows the sequence. Press A-B at your chosen appears briefly on the TV playing Input the required start time in seconds from left to hours, minutes, and If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then input the correct numbers. and the 4. right. Press ENTER to confirm. selected time. Playback starts from the Zoom Use to zoom Press ZOOM 1. the video enlarge image. during playback or still playback to 1600% size screen → fit mode → the can Input the way the when image appears on you're playing a DVD movie. Press 3/4 to select between Use the bBvVbuttons to zoomed 4. To ENTER. Press TITLE. If the current title has 1. Normal, Enhanced, appears menu may appear. move through the repeatedly normal or playback, press ZOOM ? Press DISC MENU and the disc Press DISC MENU VR disc and movie file. Marker Search Camera To enter If the disc contains You Marker a desired point the TV screen the disc. The Marker icon appears briefly. Repeat to enter up to nine on on markers. To Recall or 1. During disc search menu 2. Within 10 Clear a Marked Scene seconds, press b / B to select scene. playback or a marker clear. starts from the Or, press CLEAR and the marker number is erased from the list. You on any marker by the marker search menu. can again is menu displayed. to exit. Angle recorded at different scenes angles, you can change to a different camera angle during playback. Press ANGLE repeatedly during playback to select a desired angle. Note that the number of the current angle appears on the display. Changing press SEARCH. The marker appears on the screen. Press ENTER and marked 4. and the Audio Language playback, number that you want to recall 3. options, camera playback from up to nine memorized To enter a marker, press MARKER at the start can points. subtitle angles, as camera Disc Menu Zoom may not work on some DVDs. Screen fit mode is available for playing the DVD disc, screen. a Press TITLE to exit. 3. CLEAR button. menu, the Otherwise, the disc offers features such spoken language and chapters for the title. Notes: ? menu on the menu The 2. picture. resume corresponding number or use the b to highlight your selection. Then press B v V buttons and Maximum. 3. the Title Menu change screen the contents of DVD discs: Menus 100% size Screen fit mode: You Checking MENU. Each press of the ZOOM button changes the TV screen in the sequence: 100% size → 400% size → DVD Features DVDs may offer menus that allow you to access special features. To use the disc menu, press DISC activate the Zoom function. The square frame appears briefly in the right bottom of the picture. 2. Special play inputting Press AUDIO different repeatedly during playback audio language or audio track. to hear a With DVD-RW discs recorded in VR mode that have both main and Bilingual audio channel, you can switch between Main (L), Bilingual (R), or a mix of both (Main + Bilingual) by pressing AUDIO. a a its number Subtitles Press S-TITLE different repeatedly during playback subtitle languages. to see the Note: ? The subtitle file of the DivX file is smi, ? displayed only srt and sub. If there is no information not read in the DivX file, or " 1 there is " or etc. a code that are can displayed. 33 DVD Audio Discs DVD Audio is Moving disc format the building cess of DVD to provide high quality, uncompressed, multi-channel audio for a new experience in audio quality. A DVD Audio disc can be identified by the DVD audio logo on the disc jacket or on the disc itself. DVD Audio a new on suc- provide higher quality stereo than Audio CDs with a sampling rate of up to 192kHz (compared to 44.1kHz for CDs). DVD Audio digital sound can (compared A can DVD Audio disc contains up to seven times the data capacity of a CD. This additional space is music, either Advanced Resolution multi- channel sound ter quality that is closer to the artist's recording or for longer recordings. Many DVD Audio discs contain on-screen text, such as mas- artist of DVD maximum sound Audio, you must quality use Combi Press DISPLAY 2. Press 3/4 to select 3. Press 1/2 or during playback on in stop mode. icon. Group the numbered buttons (0-9) to select group number. Sometimes the author of the disc creates hidden tent that can only be accessed by entering a con- pass- word. If the lock icon appears on the TV screen, enter the password (sometimes you'll find it on the disc's cover or on a web site). This password isn't dictated control by your DVD/VCR Combi receiver function of the disc. --- it is Since the authoring of DVD Audio Discs varies, some of the on-screen display choices might not be available for the disc you're playing. and surround effect 5.1 channel output (5.1CH AUDIO OUT jacks 1. a Note: enjoy play. jacket biographies, playlists, or lyrics. Some DVD Audio discs contain photo galleries or video clips. To groups. Your player enables you to quickly access different groups during playback via the on-screen dis- Note: typical used for Some DVD Audio discs divide content into different a be delivered with up to 24 bits of data to 16 bits for a standard CD). to another GROUP on analog audio the DVD/VCR receiver). If you use the DIGITAL OUT (OPTICAL or COAXIAL) for your audio connection, the sound will only be similar to CD-quality sound even though you're playing a DVD Audio disc. Viewing another PAGE Since DVD Audio discs lot of content, there what's available on the disc. can hold a are various ways to see 1. Press DISPLAY during playback. 2. Press 3/4 to select 3. Press 1/2 to select Page a icon. page number. What appears on the screen will vary from disc to disc because the information available depends upon the way the disc was created. Note: Since the authoring of DVD Audio Discs varies, some of the on-screen display choices might not be available for the disc you're playing. 34 Playing Audio CD an or MP3/WMA Disc The DVD/VCR Combi receiver formatted recordings play can MP3/WMA CD-ROM, CD-R, on or CD-RW discs. MP3 / WMA disc limited ? as with this compatibility player is follows: within 8 48 kHz (MP3), Sampling frequency: within 32 48kHz (WMA) Bit rate: within 8 320kbps (MP3), 32 192kbps (WMA) The player cannot read an MP3/WMA file that has a file extension other than ".mp3" / ".wma". CD-R physical format should be ISO 9660 If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is impossible to playback MP3 / WMA files. We recommend that you use Easy-CD Creator, which - - ? Audio CD - - Once you insert an audio CD a menu appears on the TV screen. Press v / V to select a track then press PLAY or ENTER and ? starts. playback ? ? AUDIO CD 0:52:07 1/12 List Program Track1 Track2 Track3 Track4 Track5 creates Track6 Track7 ? Clear All Track8 PROGRAM Press v / V to select 2. folder, and press ENTER a the folder contents. see Press v / V to select ENTER. They ISO 9660 file system. should have a incorporate an should not contain maximum of 8 letters .mp3 or .wma extension. special letters such as / ?*:"<>letc. MP3 / WMA to names and must Edit ? 1. File an Playback track then press PLAY a or starts. The total number of files on 1/12 This DVD player requires discs and 2-Music2 require certain pre-existing conditions (see above) to ensure compatible playback. 4-Music4 5-Music5 6-Music6 Clear All 7-Music7 Customers should note that PROGRAM Info Edit required in a file list return to the Folder on list, the MUSIC menu the v / V to use and want to should and highlight press ENTER. ? Press DISC MENU to ? On ? move permission is in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission Tip: are to these 3-Music3 If you recordings many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and Program 1-Music1 ? Operation less than 650. optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are List DISPLAY the disc should be meet certain technical standards in order to achieve MUSIC 0:00:00 ? always be sought from the copyright owner. to the next page. CD with MP3/WMA and JPEG you can switch MP3/WMA and JPEG. Press TITLE and MUSIC or a PHOTO word on When a playing titles, you top of the file can see menu containing is highlighted. information such the information by pressing as track DISPLAY. 35 Audio CD and MP3 / WMA Disc Random Features 1. Pause 2. during playback or when playback is stopped. Random Playback begins immediately and RANDOM appears on the menu screen. Press PAUSE/STEP 1. Press RANDOM To return to press 2. during playback. playback, press PLAY, PAUSE/STEP again. ENTER To return to normal until repeatedly or playback, press RANDOM RANDOM disappears from the menu screen. Tip: Moving > or the next track to or briefly during playback to go to return to the beginning of the current track. Press . twice 2. previous In 3. > during another track and Press . 1. By pressing to another Track case briefly step back to the of audio CD, directly to any track, using the numbered but- to go resumes playback, the random playback. unit selects A-B 1. To 2. Press A-B track. enter the track number tons to Repeat random sequence during disc playback press A-B at your chosen starting point. The Repeat icon and "A" appear on the menu screen. repeat a again at your chosen end The point. icon and "A-B" appear on the menu screen, and the sequence begins to play Repeat (0-9). repeatedly. Track/All/Off Repeat You 1. can play a 3. track/all on a Press REPEAT when disc. playing a disc. The To exit the sequence and return to normal play, press A-B again. The Repeat icon disappears from the repeat menu screen. icon appears. 2. Press REPEAT to select ? ? ? Track: a desired repeat mode. To the current track repeats All: repeats all the tracks Off(No display): does not on a once Track a 3D surround effect that simulates speakers (instead of the five+ speakers normally required for multi-channel audio from a home theater system). play repeatedly. during Repeat produce multi-channel audio from two stereo disc. Note: If you press > 3D Surround playback, the 1. Press AUDIO "3D SUR." appears repeat playback cancels. 2. 1. or > for about two seconds during playback. The 2. player will now go into SEARCH mode. Press and hold . or > repeatedly to select the required speed: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). Search speed and direction are indicated screen. 3. 36 until menu screen. Press and hold . To exit SEARCH mode, press PLAY. on the menu on the menu screen. To return to normal repeatedly Search during playback. playback, press AUDIO "3D SUR." disappears from the Repeat Programmed Programmed Playback 1. program 1. a memory. A 2. contain 30 tracks. can Insert player Press REPEAT when Press REPEAT to select ? disc. ? ? 2. Off(No display): If you press > The repeat playback cancels. mark will appear to the right of the word "Program" on the right side of the menu screen. E Erasing Note: disappear to exit 1. Edit mode. AUDIO CD 0:52:07 mark will E 1/12 0:00:00 List Track1 Track5 2-Music2 Track2 Track7 1-Music1 4-Music4 Track3 Track4 2-Music2 6-Music6 Track4 Track1 3-Music3 1-Music1 4-Music4 Track6 5-Music5 Track7 6-Music6 Clear All Track8 Clear All 7-Music7 Audio CD Menu Video CD: Press PROGRAM while The program PROGRAM to exit the the setup (See Video CD with menu "PBC" on to the use 1. playback is to Edit mode. move to the "Program" list. 2. must set PBC to Off Repeat to erase erase additional tracks Operation the list. the Follow List" as Complete Program steps 1-2 of "Erasing a List Track from Program above. Use 3/4 to select "Clear complete Program All", then press ENTER. for the disc will be erased. on Note: programmed playback The programs removed. 25). page stop mode Press CLEAR. Erasing menu. PBC, you Press PROGRAM in the Program the List Program 4. The a playback, Use v/V to select the track that you wish to from the "Program" list. on Note: On Track from : Track during Repeat 3. appears. Press menu once play repeatedly. Press B to PROGRAM Edit Info MP3/WMA Menu stopped. repeat mode. 2. PROGRAM Edit DISPLAY desired E Program Track5 repeat 1/12 List E Program a Video CD enter MUSIC a does not Press PROGRAM. the disc. The repeats the current track All: repeats all the tracks on programmed list. Note: again, then the Program a Track: Audio CD or MP3/WMA Discs: AUDIO CD or MUSIC menu appears. Press PROGRAM playing icon appears. The program function enables you to store your favorite tracks from any disc in the Tracks are also cleared when the disc is VIDEO CD List E Program Track1 Track5 Track2 Track2 Track3 Track3 Track4 Track1 Track5 Clear All Video CD Menu 3. Select a track on the "List", then press ENTER to place the selected track on the "Program" list. Repeat to place additional tracks on the list. 4. Press B. Select the track you want to start "Program" list. 5. Press PLAY or playing Playback begins programmed the tracks. "Program" list have To normal resume playback, the ENTER to start. the order in which you Playback stops after all of the tracks 6. on select a played on in the once. playback from track of CD programmed (or MP3/WMA) list and then press PLAY. 37 Viewing JPEG Disc a Moving this DVD/VCR Combi receiver you with JPEG files. Using 1. Insert disc and close the a the TV on appears can Press . view or > menu during viewing a picture or to the previous file. once advance to the next file tray. The PHOTO JPEG to another File to JPEG Zoom screen. PHOTO Use zoom (see 33 the to enlarge page) photo image. Preview List To rotate JPEG Folder 1 JPEG Folder 2 picture >>> JPEG Folder 3 Press v / V JPEG Folder 4 JPEG Folder 5 JPEG Folder 6 picture JPEG Folder 7 during showing clockwise or a to rotate the picture counter clockwise. JPEG Folder 8 To listen to MP3/WMA music watching picture JPEG 2. Press v / V to select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the previous Folder list, the v / V buttons use the remote to Viewing the file proceeding starts. While viewing a file, you can press STOP to the previous menu (PHOTO menu). Slide Show 1. move or to PLAY. files while on listening the same containing to MP3/WMA disc. the two types of file in player. 2. Press TITLE to 3. Press v / V to select 4. Use B / V to select move Playback STOP is to the next page. display a PHOTO photo menu. file. icon then press ENTER. starts. The playback will continue until pressed. Tip: JPEG Use vVbBto display Insert the disc the If you want to view a particular file, press v / V to highlight a file and press ENTER Press DISC MENU to can music files recorded and press ENTER. highlight 3. on You To listen to highlight the (Slide Show) then press ENTER. only the desired music watching picture, programmed the desired tracks from the "MUSIC" menu and then proceed as above. Tip: ? There are (Normal) ? On three Slide and (Fast), >> disc with MP3/WMA and JPEG you can switch MP3/WMA and JPEG. Press TITLE and MUSIC or a PHOTO word ? > Speed options (Slow). : >>> Press on top of the menu is JPEG disc limited ? highlighted. with this player is follows: as upon the size and number of JPEG files, it could take a long time for the DVD player to read the disc's contents. If you don't see an on- Depending screen RETURN, information of file is hidden. compatibility display after several minutes, some of the files may be too large reduce the resolution of the JPEG files to less than 2M pixels as 2760 x --- Still Picture 1. 2048 Press PAUSE/STEP The 2. JPEG player will now slide show. ? go into PAUSE mode. To return to the slide PAUSE/STEP during again. show, press PLAY or pixels and burn another disc. The total number of files and folders the disc should be less than 650. press ? Some discs may be incompatible due to a different recording format or the condition of disc. ? Ensure that all the selected files have the extensions when ? ? copying into the CD ".jpg" layout. If the files have rename File them names ".jpe" or ".jpeg" extensions, please as ".jpg" file. without able to be read the files are Windows 38 on by shown Explorer. ".jpg" extension will not be this DVD as player. JPEG image Even though files in 5.1 Speaker Setup This chapter includes important reference information help you set your DVD/VCR Combi receiver. If you connected to receiver, setting the Distance lets the speakers know to reach the listener at the following settings for the built-in 5.1 channel surround decoder. Press SETUP. The 2. Use v / V to select the AUDIO 3. move setup menu move option then press Speaker Setup option to the third level. "Select" is 6.0(20)m(ft)] Test then high- Speaker Setup signals of each the volume to match the volume of rized in the Front Left → Press ENTER and 5.1 time. the Distance of the selected Press b / B to test the lighted. 4. - adjust same appears. to the second level. Use v / V to select the press B to Press b / B to speaker. [0.3(1)m(ft) 1. B to to your DVD/VCR Combi how far the sound has to travel to reach your set listening point. This allows the sound from each speaker Speaker Setup Make the speakers speaker. Adjust test signals memo- system. (L) Rear Left → (R) Center → Rear Front Right (R) SubWoofer Right (L) → → menu appears. AUDIO Speaker Size Volume Distance Test Operation Front L Small dB 0 m(ft) 0.6(2) Off Select Move Return 5. Use b / B to select the desired 6. Adjust options using 7. Press RETURN to return to the Speaker Select Enter speaker. v / V / b / B buttons. menu screen. selection speaker that you want to adjust. (Front speakers (Left), Center Speaker, Front speakers (Right), Rear speakers (Right), Rear speakers (Left), or SubWoofer) a Note: Certain speaker settings are prohibited by Digital licensing agreement. the Dolby Size Since the speaker settings change the settings. are fixed, you cannot Volume Press b / B to adjust the output speaker. (-6dB 6dB) level of the selected ~ Distance 39 DVD VR format Disc Playing a This unit will play DVD-R/RW discs recorded the DVD-Video format that have been a ? using finalized using Refer to the information in this contacting This unit will play DVD-RW discs recorded using Recording (VR) format. Insert a disc and close the menu appears on the TV tray. The TITLE LIST screen. DVD-VR When Please shipping save Do not ENTER and playback Press TITLE to move a track then press PLAY or starts. to the list menu. use near volatile liquids such as insecticide the unit. plastic products in contact long period of time. since they or with the unit for a leave marks the surface. Cleaning on the unit To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Note: Unfinalized DVD-R/RW discs cannot be played in this player. ? the Do not leave rubber ? Press v / V to select the unit the exterior surfaces clean spray ? service technician. original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. ? 3. before the Unit Handling Keeping 2. a chapter DVD-recorder. the Video 1. Maintenance and Service Some DVD-VR disc RECORDER. are Player made with CPRM data does not by DVD support these kinds of Do not or discs. use thinner, strong solvents such as these as might damage alcohol, benzine, the surface of the unit. What is 'CPRM'? CPRM is only a copy allowing the protection system (with scramble system) recording of 'copy once' broadcast programs. CPRM stands for Content Protection for Recordable Media. This play is CPRM compatible, which means that you can record copy-once broadcast programs, but you cannot then make a copy of those recordings. CPRM recordings can only be made on DVD-RW discs formatted in VR mode, and CPRM recordings players that are only be played on specifically compatible with CPRM. can Maintaining the Unit The DVD/VCR Combi receiver is high-tech, precision device. If the optical pick-up lens and drive parts are dirty or worn, the picture quality disc could be diminished. Depending on the operating environment, regular inspection and maintenance are recommended after every 1,000 hours of For details, please service center. 40 a use. contact your nearest authorized Playing a DivX Movie Disc DivX disc as this DVD/VCR Combi receiver you DivX disc. Using can Insert a appears disc and close the on the TV player is limited follows: play ?Available resolution size of the DivX file is under 720x576 1. with this compatibility tray. The MOVIE menu ? screen. The file (W x name H) pixel. of the DivX subtitle is available by 56 characters. MOVIE 0:00:00 ? List Movie Folder 1 If there is impossible code to file, it may be displayed as display. " Movie Folder 2 Movie Folder 3 Movie Folder 4 Movie Folder 5 express in the DivX mark on the " _ Movie Folder 6 ? Movie Folder 7 If the number of the screen frame is over 30 Movie Folder 8 per 1 second, this unit may not operate normally. Press v / V to select 2. a folder, and press ENTER. ? A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the v / V buttons on the remote to If you want to view a particular file, press v / V to highlight a file and press ENTER PLAY. GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some ? Press DISC MENU to On are called 1-point, 2-point, is highlighted. or different levels of GMC or Operation Xvid, have this option. 3-point encoding, usually GMC. to the next page. MP3/WMA, JPEG and MOVIE file, you can switch MUSIC, PHOTO and MOVIE menu. Press TITLE and MUSIC, PHOTO and MOVIE word on top of the menu a CD with move encoders, like DivX There Tip: ? audio is GMC? MPEG4 Press STOP to exit. 4. or If the file is recorded with GMC, the unit supports only 1-point of the record level. * or interleaved, either video outputted. ? press ENTER. 3. file is not and highlight If the video and audio structure of recorded Playable DivX file z ".avi ", ".mpg ", ".mpeg Playable Codec format " z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", "MP43 ", "3IVX ". Playable Audio format z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ". ? Sampling frequency: within 8 48 kHz (MP3), - within 32 ? Bit 32 48kHz (WMA) rate: within 8 320kbps (MP3), 192kbps (WMA) - - - 41 Additional Features-VCR On Screen You may part Video Doctor Display easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, tape speed and operational mode of your DVD/VCR Combi receiver will appear on the TV screen. If a recording is taking place these On Screen onto the Displays This feature informs you that there is a your DVD/VCR Combi receiver. These sages will appear 1. will not be recorded the TV with error mes- screen. Press i. Press 1 tape. on problem or 2 to select Dr. Press OK. Press CLK/CNT to 1. display. repeatedly Press CLK/CNT The display options. tape VIDEO DOCTOR to the cycle through HEAD STATUS TAPE STATUS counter and amount of tape left will appear if there is a NO. OF TIMER PROGRAMME NEXT TIMER PROGRAMME tape loaded. REC Pr-12 PSET R ACMS 16:9 4:3 DECODER TIME DATE fOSD 2. (Self-Diagnosis) After 3 seconds the majority of the leaving only the will clear Displays counter and the amount of Press CLK/CNT the TV again to tape On Screen clock left remove ON OFF all on or the tape screen. displays 2. SYSTEM NIC Press OK OPR 3 or 4 to check a problem. HEAD STATUS from O screen. PLEASE CLEAN: Clean your video heads. TAPE STATUS Tape Counter Memory Stop The O Insert displayed on the the time by pressing CLK/CNT on the remote control. The Digital Tape Counter indicates the relative positions of recordings Digital Tape Counter display window instead of on 1. the can be Shows the number of timer O or recording. will display the Press STOP when playback or 3. actual recording play time is complete. Press BACKWARD. tape will rewind and automatically stop when the counter returns to 0:00:00. 42 PR-01 26 10:00~11:00SP Shows the current status of timer start tape counter in hours, minutes and seconds. The recording. NEXT TIMER PROGRAMME Press CLEAR to set the counter to 0:00:00. 2. tape with its protection tab in place O2 Press CLK/CNT. The a NO. OF TIMER PROGRAMME tape. Press PLAY NOT RECORDABLE: Press i recording. Hi-Fi Stereo Sound System Your DVD/VCR Combi receiver will record and back Hi-Fi stereo sound. In addition it has NICAM tracks allow you to make audio recordings in Hi-Fi stereo or bilingual mode from a TV broadcast, stereo 1. or to select: repeatedly AUTO, 4:3 or back Wide-Screen programmes as Wide-Screen and Normal programmes as normal. 4:3 Only for playing back and recording Normal format and two VHS Hi-Fi stereo audio tracks. These stereo system, video disc E Automatically plays ways. Video cassettes recorded on your DVD/VCR Combi receiver will have a normal mono audio track audio or AUTO: the sound in several different playback Press D 16:9. stereo a stereo sound decoder. This allows you digital to record and play- 2. recordings (4:3). 16:9: another Hi-Fi VCR. Only for format Your DVD/VCR Combi receiver's NICAM digital sound decoder allows you to enjoy broadcasts playing back and recording recordings (16:9). Wide-Screen with NICAM sound, as well as standard stereo, bilingual and mono sound. The particular type of sound received or that recorded will be briefly displayed on the TV screen for a couple of seconds: STEREO NICAM BIL NICAM Both audio channels will be recorded on the Hi-Fi stereo tracks. The primary language channel (left) will be recorded the on mono mono track of the video on the Hi-Fi tracks and the tape without any separation. 2. Press AUDIO repeatedly until the desired audio mode appears. 3. The choice is STEREO, LEFT, RIGHT and MONO. In BIL NICAM playback the primary language is output on the left channel and the secondary channel is output simultaneously from the right channel when audio output is set to STEREO. The primary language will be output from both channels when the audio setting is MONO. Please note that when adjusting the tracking control Hi-Fi stereo sound may revert to MONO. Wide Screen Compatibility 3. Press i to To + 16:9 4:3 AUTO ACMS DECODER the remove Dr. 16:9 4:3 4:3 16:9 - Wide-Screen i menus from the TV screen. you must connect your DVD/VCR Combi receiver to the TV using a SCART cable. enjoy playback Operation To set the decoder We have already described, how to connect a decoder for pay-TV station as CANAL+ or PREMIERE on page 11. For the recording of an encoded station you do not have to control anything. You just select the station and wait shortly until the decoding will start. 1. Press i. The main Press F will appear on the TV screen. G to select the DECODER. menu or Press OK. 2. Press D ON: or E to select. When the decoder is connected to the AV2 socket. OFF: When another VCR is connected to the AV2 socket. 16:9 Your DVD/VCR Combi receiver can record and play back wide screen aspect ratio programmes (16:9). To PSET R fOSD track of the video tape. MONO The sound is recorded REC ON OFF Sound is automatically recorded on the Hi-Fi stereo and mono tracks of the video tape. VCR 12 Pr-12 3. Press i to return to a TV picture. record a wide screen format programme successfully the correct type of wide screen signal must be broadcast by the TV station. 1. Switch on your VCR. Press i. Press F or G to select 16:9/4:3. Press OK. REC PSET R fOSD ON OFF Pr-12 ACMS + 16:9 4:3 TIME DATE NIC - DECODER SYSTEM OPR Dr. VCR 12 VCR 12 REC 16:9 4:3 fOSD OKi ON OFF PSET R Pr-12 ACMS + 16:9 4:3 - DECODER SYS AUTO 4:3 16:9 Dr. 16:9 4:3 i 43 Additional Features Last Scene Video Mode Memory Setting With certain discs, the playback picture may be flickering Dot Crawl is shown or straight on lines. This player memorizes last scene from the last disc that is viewed. The last scene remains in memory That if you remove the disc from the player or switch off the player. If you load a disc that has the scene perfectly matched with the disc. In this case, the picture quality may be improved by changing the memorized, the video mode. is automatically recalled. To Note: This player does not memorize the switch off the player before commencing of appears when you leave the DVD mode for about five minutes. screen saver player in Stop or De-interlace is mode, press and hold during disc playback. The new video mode number selected is displayed on the TV screen. Check whether the video quality has improved. If not, repeat the above procedure until picture quality is improved. a Screen Saver The the video change DISPLAY about 3 seconds disc if you to play the disc. scene interpolation not even scene Vertical means Video mode sequence: MODE1 → MODE2 → MODE3 → MODE1 If you turn off the power, the video mode will return to initial default state (MODE1). Detailed MODE1 al or : The video MODE2 : Description source material) : material of the DVD video (film materi- is determined from disc information. Suitable for based material MODE3 of each Video Mode playing film based content or video recorded by the progressive scan method. Suitable for comparatively playing video based content with little motion. Note: The video mode Progressive menu. 44 setting only works when the Scan mode is set to "On" on the setup Copying from DVD To VCR Recording This unit allows you to copy the contents of a DVD to a VHS tape with a press of the REC/ITR button. Notes: Be sure setup to set protected, 2. 3. Scan" to "Off" on the recorder With this video recorder you can make recordings from an external source, such as copying from another DVD/VCR Combi receiver or a camcorder. menu. If the DVD you 1. "Progressive from another video attempting to copy is copy you may not be able to copy the disc. are Note: In the this video recorder will be one will be referred to following description, used for recording and DVD/VCR Combi receiver B. The other Insert Disc Insert the disc you wish to copy in the DVD deck and close the disc tray. be used for Insert VHS Tape Insert a blank VHS 1. videotape into the VCR deck. will as DVD/VCR Combi receiver A should be connected unit or the AV sockets on on the the panel of your front panel of your rear unit. The DVD will go into Play mode and the DVD/VCR Combi receiver will go into Record mode. appears, you may need button manually to begin menu Play and will be referred to to the SCART socket the DVD to VHS Tape Press the REC/ITR button. to press the appliance DVD/VCR Combi receiver A. Copy If the DVD disc playback as 2. Insert the recorded receiver A and a tape into VD/VCR Combi blank tape into DVD/VCR Combi receiver B. 3. Press AV until the socket you wish to record from is displayed. (DVD/VCR Combi receiver B) copying. AV 1 for If you press the REC/ITR button, be sure this DVD/VCR Combi receiver in DVD mode. the Copy Process When the DVD is finished end the copy. playing, press STOP to stop the Copy process manually when the DVD movie ends, or the unit may over the rear (Left and over again. & Right) sockets on the front of your unit. 4. To start 5. When you want to finish copying, press the STOP on both DVD/VCR Combi receiver. You must and record rear of your unit. AV 3 for recording from VIDEO IN and AUDIO IN on Stop replay the from EURO AV1 SCART socket of your unit. AV 2 for recording from EURO AV2 SCART socket on Note: 4. recording press the REC/ITR on DVD/VCR Combi receiver B and PLAY on DVD/VCR Combi receiver A. recording, 45 the Radio Stations Presetting You can tuning, 50 stations for FM and AM. Before preset make Listening sure Preset radio stations in the DVD/VCR Combi receiver that you have turned down the vol- Press FM/AM the remote control on front on memory first (see "Presetting radio stations" the on left). ume. 1. to the Radio panel until the frequency the display and TV screen. or on the 1. band appears Press FM/AM on the remote control front on panel until the frequency the display and TV screen. or on the band appears The last received station is tuned in. 2. Press 3/4 on the remote control repeatedly to select the preset station you want. Each time you press the button, the DVD/VCR Combi RADIO AM , 2. 522kHZ Press 3/4 the remote control to select your desired radio channel. OK, CLEAR Press FM/AM front 06 108. 00MHZ , panel Hold down the remote control on or on the to select the desired band. 4 PRESET 3 on the front panel or hold down 1 and 2 on the remote control for 1 or 2 seconds, and a station is searched for automatically. RADIO FM 46 06 87. 50MHZ , OK, CLEAR 5. Press MEMORY 6. Repeat steps on one preset station at a time. Adjust the volume by rotating VOLUME on the front panel or by pressing VOLUME + or on the remote control repeatedly. - on FM 4. 3. OK, CLEAR RADIO 3. receiver tunes in 01 the remote control. 2 to 5 to store other stations. To Clear the Stored Radio Stations 1. Press FM/AM the remote control on front until the the and TV panel display frequency or on the band appears Tuning 1. on screen. 2. Press FM/AM on the and TV Press FM/AM 4 FM band appears on screen. the remote control the or on PRESET 3 on the front panel or hold the remote control to tune in on the desired station. 06 108. 00MHZ OK, CLEAR , 2. frequency the or on to select the desired band. panel Press on Manually the remote control until the panel display down 1 and 2 RADIO Station a front front 3. into Press 3/4 the remote control to select your desired station. on Tuning into a Station Automatically Hold down 4 PRESET down 1 and 2 seconds, and a 3 on the front panel the remote control for 1 station is searched for on hold or or 2 automatically. RADIO AM , 3. Note 10 522kHZ The search may not weak signal. OK, CLEAR Press CLEAR the remote control to clear the stored radio station. stop at a station with answer the appear in FM very Operation Mute Press MUTE to mute your unit. You can mute your unit in order, for RADIO a telephone, the display. example, to MUTING and MUTE indicator 10 98. 00MHZ , OK, CLEAR Note While record or record pause function may not be mode, the CLEAR operated. 47 Language Codes Use this list to your desired language for the Disc Audio, Disc Subtitle, Disc Menu. Language Code Abkhazian following Code 6566 Language Fiji Afar 6565 Afrikaans initial settings: Code 7074 Language Lingala Code 7678 Language Singhalese Finnish 7073 Lithuanian 7684 Slovak 8375 6570 French 7082 Macedonian 7775 Slovenian 8376 Albanian 8381 Frisian 7089 7771 Somali 8379 6577 Galician 7176 7783 Spanish 6983 Arabic 6582 Georgian 7565 Malagasy Malay Malayalam Ameharic 7776 Sudanese 8385 Armenian 7289 German 6869 Maltese 7784 Swahili 8387 Assamese 6583 Greek 6976 Maori 7773 Swedish 8386 Aymara Azerbaijani 6588 Greenlandic 7576 Marathi 7782 8476 6590 Guarani 7178 Moldavian 7779 Tagalog Tajik Bashkir 6665 Gujarati 7185 Mongolian 7778 Tamil 8465 Basque Bengali; Bangla 6985 Hausa 7265 Nauru 7865 Tatar 8484 6678 Hebrew 7387 7869 Telugu 8469 Bhutani 6890 Hindi 7273 7879 Thai 8472 Bihari 6672 Hungarian 7285 7982 Tibetan 6679 Breton 6682 Icelandic 7383 Nepali Norwegian Oriya Panjabi 8065 8473 Bulgarian 6671 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Burmese 7789 Interlingua 7365 Persian 7065 Turkish 8482 Byelorussian 6669 Irish 7165 Polish 8076 Turkmen 8475 Cambodian 7577 Italian 7384 Portuguese 8084 Twi 8487 Catalan 6765 Japanese 7465 Quechua 8185 Ukrainian 8575 Chinese 9072 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Corsican 6779 Kannada 7578 Rumanian 8279 Uzbek 8590 Croatian 7282 Kashmiri 7583 Russian 8285 Vietnamese 8673 Czech 6783 Kazakh 7575 Samoan 8377 Volapuk 8679 Danish 6865 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Dutch 7876 Korean 7579 Scots Gaelic 7168 Wolof 8779 English Esperanto 6978 Kurdish 7585 Serbian 8382 Xhosa 8872 6979 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 Estonian 6984 Latin 7665 Shona 8378 Yoruba 8979 Faroese 7079 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 Country Choose a 8373 8471 8479 Codes country code from this list. Country Afghanistan Argentina Code Code Code ET Country Malaysia MY Saudi Arabia SA FJ Maldives MV SN AR Australia AU Finland FI Mexico MX Austria AT France FR Monaco MC Senegal Singapore Slovak Republic Belgium BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Islands HM Netherlands Antilles AN Sri Lanka LK Canada CA HK New Zealand NZ Sweden SE Chile CL Hong Kong Hungary HU NG Switzerland CH China CN India IN Nigeria Norway NO Taiwan TW Colombia CO Indonesia ID Oman OM Thailand TH Congo CG Israel IL Pakistan PK TR Costa Rica CR Italy IT Panama PA Turkey Uganda Croatia HR Jamaica JM PY Ukraine UA CZ JP Paraguay Philippines PH United States US KE Poland PL Uruguay UY KW Portugal PT Uzbekistan UZ LY Romania RO Vietnam VN LU Russian Federation RU Zimbabwe ZW Republic AF Denmark DK Japan Kenya Ecuador EC Kuwait Egypt EG El Salvador SV Libya Luxembourg Country Code Country Ethiopia Fiji Czech 48 input SG SK UG Check the following guide for the possible cause of a problem before service. contacting Cause Symptom Correction No power. The power cord is disconnected. Plug the power securely. cord into the wall outlet The power is on, but the DVD/VCR Combi No disc is inserted. Insert tape. (Check that the No disc tape is inserted. picture. or disc or tape indicator in the display window is lit.) The TV is not set to receive DVD/VCR Select the Combi receiver on appropriate video input so the picture from the receiver does not work. No a signal output. the TV mode DVD/VCR Combi receiver appears the TV screen. TV/VCR mode for DVD/VCR Combi receiver is set to TV. on Press the TV/VCR button on the remote control repeatedly to choose VCR mode. TV indicator disappears in the display window. The video cable is not connected Connect the video cable securely. securely. No sound. The connected TV power is turned off. Turn The cable is not set to receive DVD/VCR Select the correct input mode on the audio receiver so you can listen to the sound from Combi receiver the DVD/VCR Combi receiver. connected with the audio equipment signal output. The audio cables are not connected on the TV. Connect the audio cables securely. securely. The power of the equipment connected with the audio cables is turned off. Turn The Set the digital audio output wrong position. The playback picture is poor. The DVD/VCR Combi receiver does not start playback. The disc is Tape heads Tape is is set to the the equipment connected with the audio cables. digital audio output to the correct position, then turn on the DVD/VCR Combi receiver again by pressing POWER. Clean the disc. dirty. Clean video heads. dirty. are on another DVD/VCR Combi receiver. (v/V) for manual tracking adjustment while tape is playing. No disc is inserted. Insert No disc a rental recorded or was on tape is inserted. Use a or disc tape indicator in the display window is An unplayable Insert disc is inserted. a lit.) (Check the disc system, and Regional code.) playable type, color The disc is placed upside The disc is not guide. Place the disc inside the dirty. Clean the disc. The level is set. Cancel the rating on playback the disc side down. tray correctly guide. The disc is Rating disc. Place the disc with the down. within the placed tape. (Check that the or Rating function or change the level. Video Head Cleaning Whenever a video cassette is inserted into or ejected from your DVD/VCR Combi receiver the video head is automatically cleaned. This should mean that additional head cleaning should not be necessary. However dirt accumulating on the head after a long period of time can cause the playback picture to become blurred or broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged tapes might. 49 Cause Symptom This remote control The remote control is not the same buttons for VCR and remote uses sensor Correction pointed at the Point the remote control at the remote of the DVD/VCR Combi receiver. The remote control is too far from the DVD functions Operate (7 m). DVD/VCR Combi receiver. (ex. PLAY). There is an obstacle in the path of the DVD/VCR Combi receiver. sensor of the remote the remote control within 23 ft Remove the obstacle. control and the DVD/VCR Combi receiver. The batteries in the remote control Replace are the batteries with new ones. exhausted. This remote control buttons for VCR and DVD functions VCR, first press the VCR button. When using a DVD, first press (ex. PLAY). the CD/DVD button. The DVD/VCR Combi receiver is in the Press PAUSE/STEP during recording. RECORD PAUSE MODE. recording. The The The or tape does tape will not run not rewind fast-forward. the uses When same tape is already fully rewound or fast- The automatic tracking mode is engaged. The automatic tracking mode is engaged. Breaks There is noticeable in Hi-Fi soundtrack. Recording Check the a (X) to resume tape. forwarded. Noise appears during normal playback. are using no tape loaded, has had its record cannot be The started. safety or the tape loaded manual tracking (see p. 27). Try manual tracking (see p. 27). tab removed. (another VCR, camcorder) properly connected. source not been Try has Insert a cover the hole where the tab tape, or using adhesive tape, was removed. Tape-to-tape editing not possible. Timer recording is won't The clock/or the timer have been set Confirm that the camcorder is incorrectly. connected. The timer is not Re-perform settings. work. engaged. properly the clock and/or timer Press POWER and confirm that the timer indicator is displayed on DVD/VCR Combi receiver's The loaded tape has had its record safety tab removed. Insert a insert a the Display. pate with adhesive tape, or tape with the record safety tab intact. Audio mode is not set No Hi-Fi sound. Select "STEREO" properly. ing AUDIO on by repeatedly pressthe remote control. Moisture Condensation Moisture condensation can occur: ?W hen the DVD/VCR Combi receiver is moved from a ? cold Under place to a warm extremely In locations where moisture condensation may ? Keep the DVD/VCR Combi receiver AC power outlet with POWER On. prevent condensation. place. humid conditions. ? When condensation has plugged into This will help occurred, wait for the DVD/VCR Combi receiver to it. 50 occur: dry a an few hours before using General Power requirements Power consumption Dimensions (approx.) Mass (approx.) Operating temperature Refer to main label Refer to main label Timer 430X81X360mm(wxhxd) 5.8 kg (17.6 lbs) 5˚C to 40˚C (41˚F to 104˚F) 24-hour display type Operating humidity 5%to90% DVD Section Laser Semiconductor Signal system Frequency response PAL/NTSC laser, wavelength 650 nm DVD(PCM96kHz):8Hzto44kHz DVD(PCM48kHz):8Hzto20kHz CD:8Hzto20kHz Signal-to-noise ratio More than 70 dB Harmonic distortion Less than 1.0% Dynamic Outputs More than 60 dB range S-VIDEO OUT (Y) (C) 1.0 V out connectors (analog (DVD, CD) (p-p), 75 ohms, negative (p-p) 75 ohms 0.3 V only) sync, Mini DIN 4-pin x 1 VCR Section Head 6 heads helical system Television scan PAL/SECAM colour system Recording format Tape speed azimuth system system PAL/MESECAM PAL/MESECAM; 23.39 mm/s (SP), 16.69 mm/s (LP) NTSC Maximum recording time Rewind time Input level Output level Signal-to-noise ratio (Playback only); 35.35 mm/s (SP), 16.67 mm/s (LP), 11.12 mm/s (EP) SP: 4 h (E-240 tape), LP: 8 h (E-240 tape) About 180 min (E-180 tape) VIDEO: 1.0 V(p-p), 75 ohms, unbalanced AUDIO: -6.0 dBm, more than 10 kohms (SCART) -6.0 dBm, more than 47 kohms (RCA) VIDEO: 1.0 V(p-p), 75 ohms, unbalanced VIDEO: More than 43 dB AUDIO: More than 72 dB More than 42 dB (Hi-Fi) (Mono) Dynamic range AUDIO: More than 85 dB Tuner Section Tuning FM: 87.5 range AM: 522 Intermediate frequency - - 108.0 MHz 1611 kHz FM: 10.7 MHz AM: 450 kHz Amplifier Section Stereo mode Surround mode 90W+90W(8ohmat1kHz,THD10%) Front: 90W + 90W (THD 10%) Centre: 90W Surround:90W + 90W Subwoofer: 150W (4 (8 ohm at 1 ohm at 30 kHz, THD 10%) Hz, THD 10%) 51 Speaker Satellite Section (LHS-CX643T) Type Impedance Frequency Response 2 Sound Pressure Level 85 dB/W Rated 90W Input Power Max Input Power Net Dimensions (W Net Weight Centre Way 5 Speaker 8Ω 120 20,000 Hz - (1m) 180W H x x 326x1500x326mm D) 13 kg speaker (LHS-CX643C) Type Impedance Frequency Response 2 Sound Pressure Level 85 dB/W Rated 90W Input Power Max. Input Power Net Dimensions (W Net Weight Passive Subwoofer Way 5 Speaker 8Ω 120 20,000 Hz - 180 W H x x 600x152x154mm D) 2.6kg (LHS-CX643W) 1 Way 1 Type Impedance Frequency Response 4Ω Sound Pressure Level 82 dB/W Rated 150W Input Power Max Input Power Net Dimensions (W Net Weight (1m) 40 Speaker 1,500 Hz - (1m) 300W H x x 350x482x350mm D) 9.6 kg Accessories: AM/FM antenna, RCA Design and cable, Speaker cable specifications are Manufactured under license from subject Dolby to x 6, Scart cable, Remote control, Batteries (AAA) change Laboratories. 52 Digital Out" are trademarks of Digital 2 without notice. "Dolby", "Pro Logic" Laboratories. "DTS" and "DTS x Theater Systems, Inc. and the double-D symbol are trademarks of Dolby P/N: 3834RH0086P
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021