LG 42LA6600 Owner's Manual

LG 42LA6600 Owner's Manual
OWNER’S MANUAL
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it
for future reference.
42LA6600
47LA6600
55LA6600
47LA6610
55LA6610
42LA6680
47LA6680
*MFL67727412*
P/NO : MFL67727412 (1312-REV03)
www.lg.com
2
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER
TO QUALIFIED SERVICE PERSONNEL.
The
lightning flash with arrowhead
WARNING/CAUTION
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
yyDo not use this apparatus near water.
yyClean only with a dry cloth.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ENGLISH
ENG
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
WARNING
If you ignore the warning message, you may
be seriously injured or there is a possibility of
accident or death.
CAUTION
If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
The note helps you understand and use the
product safely. Please read the note carefully
before using the product.
yyDo not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
yyDo not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
yyDo not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet (Can differ by country).
Power Supply
upon the
panel with
yyDo not press stronglyShort-circuit
Breaker
a hand or a sharp object
such as a nail,
pencil or pen, or make a scratch on it.
IMPORTANT SAFETY INSTRUCTIONS
yyProtect the power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
yyOnly use attachments/accessories
specified by the manufacturer.
yyUse only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Short-circuit
Breaker
Short-circuit
Breaker
Short-circuit
Breaker
Short-circuit
Breaker
yyCAUTION concerning the Power Cord
(Can differ by country):
It is recommended that appliances be
placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that
appliance and has no additional outlets or
branch circuits. Check the specification page
of this owner’s manual to be certain. Do not
connect too many appliances to the same
AC power outlet as this could result in fire or
electric shock. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could
result in electric shock or fire. Periodically
examine the cord of your appliance, and
if its appearance indicates damage or
deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with
Power Supply
an exact replacement part by an authorized
Power Supply
service. Protect the power cord from physical
or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets,
and the point where the cord exits
Power
Supply
the appliance. Do not move the TV with
the power cord plugged in. Do not use a
Power Supply
damaged or loose power cord. Be sure do
grasp the plug when unplugging the power
cord. Do not pull on the power cord to unplug
the TV.
yyRefer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
Supply
apparatus has been exposed to rain or Short-circuit Power
- To reduce the risk of fire or
yyWarning
moisture, does not operate normally, or hasBreaker
electrical shock, do not expose this product
been dropped.
to rain, moisture or other liquids. Do not
touch the TV with wet hands. Do not install
this product near flammable objects such
as gasoline or candles, or expose the TV to
direct air conditioning.
yyDo not stick metal objects or any other
conductive material into the power cord.
Do not touch the end of the power cord
while it is plugged in.
yyKeep the packing anti-moisture material or
yyDo not expose to dripping or splashing
vinyl packing out of the reach of children.
and do not place objects filled with
liquids,
Power Supply
Short-circuit
Anti-moisture material is harmful if
such as vases, cups, etc.
on or over the
Breaker
swallowed. If swallowed by mistake, force
apparatus (e.g. on shelves above the unit).
the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach
of children.
Power Supply
Short-circuit
Breaker
Short-circuit
Breaker
Power Supply
ENGLISH
ENG
yyUnplug this apparatus during lightning
storms or when unused for long periods of
time.
3
4
IMPORTANT SAFETY INSTRUCTIONS
yyGrounding
(Except for devices which are not
grounded.)
Ensure that you connect the earth ground
wire to prevent possible electric shock
(i.e. a TV with a three-prong grounded AC
plug must be connected to a three-prong
grounded AC outlet). If grounding methods
are not possible, have a qualified electrician
install a separate circuit breaker. Do not try to
ground the unit by connecting it to telephone
wires, lightening rods, or gas pipes.
Short-circuit
Breaker
Power Supply
ENGLISH
ENG
yyAs long as this unit is connected to the AC
wall outlet, it is not disconnected from the AC
power source even if the unit is turned off.
yyDo not attempt to modify this product in
any way without written authorization from
LG Electronics. Unauthorized modification
could void the user’s authority to operate
this product.
yyOutdoor Antenna Grounding
(Can differ by country):
If an outdoor antenna is installed, follow
the precautions below. An outdoor antenna
system should not be located in the vicinity
of overhead power lines or other electric light
or power circuits, or where it can come in
contact with such power lines or circuits as
death or serious injury can occur. Be sure the
antenna system is grounded so as to provide
some protection against voltage surges
and built-up static charges. Section 810 of
the National Electrical Code (NEC) in the
U.S.A. provides information with respect to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding
conductors, location of antenna discharge
unit, connection to grounding electrodes and
requirements for the grounding electrode.
Antenna grounding according to the
National Electrical Code, ANSI/NFPA 70
Antenna Lead in Wire
Ground Clamp
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductor
(NEC Section 810-21)
Electric Service
Equipment
Ground Clamp
NEC: National Electrical Code
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
yyCleaning
When cleaning, unplug the power cord and
wipe gently with a soft cloth to prevent
scratching. Do not spray water or other
liquids directly on the TV as electric shock
may occur. Do not clean with chemicals
such as alcohol, thinners or benzine.
yyMoving
Make sure the product is turned off,
unplugged and all cables have been
removed. It may take 2 or more people to
carry larger TVs. Do not press or put stress
on the front panel of the TV.
yyVentilation
Install your TV where there is proper
ventilation. Do not install in a confined
space such as a bookcase. Do not cover
the product with cloth or other materials
while plugged. Do not install in excessively
dusty places.
yyIf you smell smoke or other odors coming
from the TV, unplug the power cord and
contact an authorized service center.
yyKeep the product away from direct
sunlight.
yyNever touch this apparatus or antenna
during a thunder or lightning storm.
yyWhen mounting a TV on the wall, make
sure not to install the TV by hanging the
power and signal cables on the back of the
TV.
yyDo not allow an impact shock or any
objects to fall into the product, and do not
drop anything onto the screen.
yyDisconnecting the Main Power
The power outlet used with this device
must remain easily accessible.
yyStore the accessories (battery, etc.) in a
safe location out of the reach of children.
yyThis apparatus use batteries. In your
community there might be regulations
that require you to dispose of these
batteries properly due to environmental
considerations. Please contact your
local authorities for disposal or recycling
information.
yyDo not dispose of batteries in a fire.
yyDo not short circuit, disassemble or allow
the batteries to overheat.
IMPORTANT SAFETY INSTRUCTIONS
Preventing “Image burn” or “Burn-in” on
your TV screen
yyIf a fixed image displays on the TV screen
for a long period of time, it will be imprinted
and become a permanent disfigurement on
the screen. This is “image burn” or “burnin” and not covered by the warranty.
yyIf the aspect ratio of the TV is set to 4:3
for a long period of time, image burn
may occur on the letterboxed area of the
screen.
yyAvoid displaying a fixed image on the TV
screen for a long period of time (2 or more
hours for LCD, 1 or more hours for the
Plasma TV) to prevent image burn.
ENGLISH
ENG
yyDot Defect
The Plasma or LCD panel is a high
technology product with resolution of
two million to six million pixels. In a very
few cases, you could see fine dots on the
screen while you’re viewing the TV. Those
dots are deactivated pixels and do not
affect the performance and reliability of the
TV.
yyGenerated Sound
“Cracking” noise: A cracking noise that
occurs when watching or turning off the TV
is generated by plastic thermal contraction
due to temperature and humidity. This
noise is common for products where
thermal deformation is required.
Electrical circuit humming/panel buzzing: A
low level noise is generated from a highspeed switching circuit, which supplies
a large amount of current to operate a
product. It varies depending upon the
product.
This generated sound does not affect the
performance and reliability of the product.
yyTake care not to touch the ventilation
openings. When watching the TV for
a long period, the ventilation openings
may become hot. This does not affect
the performance of the product or cause
defects in the product.
yyIf the TV feels cold to the touch, there
may be a small “flicker” when it is turned
on. This is normal, there is nothing wrong
with TV. Some minute dot defects may be
visible on the screen, appearing as tiny red,
green, or blue spots. However, they have
no adverse effect on the TV’s performance.
Avoid touching the LCD screen or holding
your finger(s) against it for long periods
of time. Doing so may produce some
temporary distortion effects on the screen.
5
6
IMPORTANT SAFETY INSTRUCTIONS
Viewing 3D Imaging
(For 3D models)
WARNING
Viewing Environment
yyViewing Time
- When watching 3D contents, take 5 - 15
minute breaks every hour. Viewing 3D
contents for a long period of time may cause
headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or
chronic illness
ENGLISH
ENG
yySome users may experience a seizure or
other abnormal symptoms when they are
exposed to a flashing light or particular
pattern from 3D contents.
yyDo not watch 3D videos if you feel nausea,
are pregnant and/ or have a chronic illness
such as epilepsy, cardiac disorder, or blood
pressure disease, etc.
yy3D Contents are not recommended to
those who suffer from stereo blindness
or stereo anomaly. Double images or
discomfort in viewing may be experienced.
yyIf you have strabismus (cross-eyed),
amblyopia (weak eyesight) or astigmatism,
you may have trouble sensing depth and
easily feel fatigue due to double images. It
is advised to take frequent breaks than the
average adult.
yyIf your eyesight varies between your right
and left eye, revise your eyesight prior to
watching 3D contents.
Symptoms which require discontinuation or
refraining from watching 3D contents
yyDo not watch 3D contents when you feel
fatigue from lack of sleep, overwork or
drinking.
yyWhen these symptoms are experienced,
stop using/watching 3D contents and get
enough rest until the symptom subsides.
- Consult your doctor when the symptoms
persist. Symptoms may include headache,
eyeball pain, dizziness, nausea, palpitation,
blurriness, discomfort, double image,
visual inconvenience or fatigue.
CAUTION
Viewing Environment
yyViewing Distance
- Maintain a distance of at least twice the
screen diagonal length when watching 3D
contents. If you feel discomfort in viewing
3D contents, move further away from the TV.
Viewing Age
yyInfants / Children
- Usage/ Viewing 3D contents for children
under the age of 5 are prohibited.
- Children under the age of 10 may overreact
and become overly excited because their
vision is in development (for example: trying
to touch the screen or trying to jump into
it. Special monitoring and extra attention is
required for children watching 3D contents.
- Children have greater binocular disparity of
3D presentations than adults because the
distance between the eyes is shorter than
one of adults. Therefore they will perceive
more stereoscopic depth compared to
adults for the same 3D image.
yyTeenagers
- Teenagers under the age of 19 may be
stimulated to light coming from 3D videos.
Advise them not to watch 3D videos for a
long time when they are tired.
yyElderly
- The elderly may perceive less of a 3D
effect than the youth. Do not sit closer to
the TV than the recommended distance.
Cautions when using the 3D glasses
yyMake sure to use LG 3D glasses.
Otherwise, you may not be able to view 3D
videos properly.
yyDo not use 3D glasses instead of your
normal glasses, sunglasses or protective
goggles.
yyUsing modified 3D glasses may cause eye
strain or image distortion.
yyDo not keep your 3D glasses in extremely
high or low temperatures. It will cause
deformation.
yyThe 3D glasses are fragile and are easy to be
scratched. Always use a soft, clean piece of
cloth when wiping the lenses. Do not scratch
the lenses of the 3D glasses with sharp
objects or clean/wipe them with chemicals.
LICENSES / OPEN SOURCE SOFTWARE NOTICE
7
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com .
Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete
your registration.
“DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274”
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the
Symbol & DTS and the Symbol together are registered trademarks & DTS
2.0+Digital Out is a trademark of DTS, Inc. Product includes software. ©
DTS, Inc. All Rights Reserved.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained
in this product, please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the
cost of performing such distribution (such as the cost of media, shipping and handling) upon email
request to ‘[email protected]’. This offer is valid for three (3) years from the date on which you
purchased the product.
ENGLISH
ENG
“DivX Certified® to play DivX® video up to HD 1080p, including premium
content.”
8
TABLE OF CONTENTS
TABLE OF CONTENTS
2
IMPORTANT SAFETY
INSTRUCTIONS
28
REMOTE CONTROL
6
Viewing 3D Imaging (For 3D models)
31
7
LICENSES
Magic Remote Control
Functions
7
OPEN SOURCE SOFTWARE
NOTICE
32
32
32
Registering Magic Remote Control
How to use Magic Remote Control
Precautions to Take when Using the
Magic Remote Control
8
TABLE OF CONTENTS
9
ENGLISH
ENG
33
WATCHING TV
33
Turning the TV on for the first time
Installation Procedure
34
Using the user guide
9
ASSEMBLING AND PREPARING
35
SPECIFICATIONS
9
11
12
13
14
Unpacking
Optional Extras
Parts and Buttons
Lifting and moving the TV
Setting up the TV
38external control device
setup
14
15
16
17
-
18
MAKING CONNECTIONS
18
19
Connecting to an antenna or cable
Connecting to a HD receiver, DVD
Player, or VCR
19
20
21
22
23
-
Attaching the stand
Mounting on a table
Tidying cables
Mounting on a wall
HDMI Connection
DVI to HDMI Connection
Connecting to a mobile phone
Component Connection
Composite Connection
24
Connecting to a PC
24
- HDMI Connection or DVI to HDMI
Connection
26
26
27
27
Connecting to an Audio System
- Digital Optical Audio Connection
Connecting Headphones
Connecting a USB Drive
39
MAINTENANCE
39
Cleaning Your TV
39
39
- Screen, frame, cabinet and stand
- Power cord
39
TROUBLESHOOTING
NOTE
yyImage shown may differ from your TV.
yyYour TV’s OSD (On Screen Display) may
differ slightly from that shown in this
manual.
yyThe available menus and options may
differ from the input source or product
model that you are using.
yyNew features may be added to this TV in
the future.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
9
Installation Procedure
1
Open the package and make sure all the accessories are included.
2
Attach the stand to the TV set.
3
Connect an external device to the TV set.
4
Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
ASSEMBLING AND PREPARING
Unpacking
CAUTION
yyDo not use any unapproved items to ensure the safety and product life span.
yyAny damages or injuries by using unapproved items are not covered by the warranty.
yyIn case of some model, the thin film on screen is a part of TV, So don’t take it off.
NOTE
yyThe items supplied with your product may vary depending upon the model.
yyProduct specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
thick and 18 mm width.
yyUse an extension cable that supports USB 2.0 if the USB cable or USB flash drive does not fit
into your TV’s USB port.
B
B
A
A
*A
*B
10 mm
18 mm
ENGLISH
ENG
Check your product box for the following items. If there are any missing accessories, contact the
local dealer where you purchased your product. The illustrations in this manual may differ from the
actual product and item.
10
ASSEMBLING AND PREPARING
Magic Remote Control,
Batteries (AA)
(See p.31)
Owner’s Manual
Stand Body, Stand Base
(See p.14)
Stand Screws
8 EA, M4 x 14
(See p.14)
Power Cord
(For 42/47LA6600,
47LA6610, 42/47LA6680)
(For 42LA6600, 42LA6680)
Cable Holder
(See p.16)
Desk-mount screw
2 EA (See p.15)
Bracket Screw
2 EA, M4 x 8
(See p.15)
(For 47LA6600, 47LA6610,
47LA6680)
(For 42/47LA6600,
47LA6610, 42/47LA6680)
Bracket Screw
2 EA, P4 x 8
(See p.15)
Desk-mount Cable
2 EA (See p.15)
ENGLISH
ENG
Remote Control
and Batteries (AAA)
(Depending upon model)
(See p.28)
(For LA6680 series)
Tag On
Tag On
Blu-Ray
Cinema 3D Glasses
The number of 3D glasses
may differ depending upon
the model or country.
ASSEMBLING AND PREPARING
11
Optional Extras
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
These devices only work with certain models.
The model name or design may be changed manufacturer’s circumstances or policies.
AN-MR400
Magic Remote
AG-F***
Cinema 3D Glasses
AN-VC4**/ VC5**
Video Call Camera
AG-F***DP
Dual Play Glasses
AN-BL***
Wireless IR Blaster
(Depending upon model)
LG Audio Device
Tag On
ENGLISH
ENG
Tag On
12
ASSEMBLING AND PREPARING
Parts and Buttons
Screen
Buttons
OK
SETTINGS
INPUT
ENGLISH
ENG
Speakers
Remote Control Sensor
Logo Light
Button
Description
/
(^ / v)
Scrolls through the saved channels.
/
(+ / -)
Adjusts the volume level.
(OK ⊙)
Selects the highlighted menu option or confirms an input.
(SETTINGS)
Accesses the main menus, or saves your input and exits the menus.
(INPUT
Changes the input source.
)
(ꔰ / I)
Turns the power on or off.
NOTE
ppps
yyRemoving the protective film on the bottom of the TV
(Depending upon model)
»»The protective film was applied to the TV face to protect it
from scratches and other damage during shipping.
»»When the TV is installed, peel the film off the bottom of the
cabinet.
ASSEMBLING AND PREPARING
Lifting and moving the TV
When moving or lifting the TV, read the
following to prevent the TV from being
scratched or damaged and for safe
transportation regardless of its type and size.
13
yyWhen transporting a large TV, there should
be at least 2 people.
yyWhen transporting the TV by hand, hold the
TV as shown in the following illustration.
CAUTION
yyAvoid touching the screen at all times, as
this may result in damage to the screen.
yyIt is recommended to move the TV in
the box or packing material that the TV
originally came in.
yyBefore moving or lifting the TV, disconnect
the power cord and all cables.
yyWhen holding the TV, the screen should
face away from you to avoid damage.
ENGLISH
ENG
yyHold the top and bottom of the TV
frame firmly. Make sure not to hold the
transparent part, speaker, or speaker grill
area.
yyWhen transporting the TV, do not expose
the TV to jolts or excessive vibration.
yyWhen transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
14
ASSEMBLING AND PREPARING
Setting up the TV
You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment
center or other furniture.
Attaching the stand
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
CAUTION
yyWhen attaching the stand to the TV set, place the screen facing down on a cushioned table or
flat surface to protect the screen from scratches.
yyMake sure that the screws are fastened tightly. (If they are not fastened securely enough, the
TV may tilt forward after being installed.)
yyDo not tighten the screws with too much force; otherwise they may be damaged and come
loose later.
NOTE
yyRemove the stand before installing the TV on a wall mount by performing the stand attachment
in reverse.
ENGLISH
ENG
1
3
4 EA
M4 x 14
4 EA
M4 x 14
Front
Stand Body
Stand Base
2
ASSEMBLING AND PREPARING
Mounting on a table
1
15
NOTE
Lift and tilt the TV into its upright position on
a table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
yyWhen adjusting the angle of the TV, watch
out for your fingers.
»»Personal injury may occur if hands or fingers
are pinched. If the product is tilted too much,
it may fall, causing damage or injury.
10 cm
10 cm
10 cm
10 cm
Front
Rear
Securing the TV to a table
(For 42/47LA6600, 47LA6610, 42/47LA6680)
2
Connect the power cord to a wall outlet.
Adjusting the angle of the TV to suit view
1
Connect the Desk-mount Cables to the
Stand Base using the Bracket Screws.
2
Fix the Desk-mount Cables to a table using
the Desk-mount Screws.
3
Once the TV is fixed, move the table close to
the wall. Children may go in, causing injuries.
Swivel 15 degrees to the left or right and adjust
the angle of the TV to suit your view.

15˚
2 EA
15˚
(For 42LA****)
M4 X 8
2 EA
(For 47LA****)
P4 X 8
2 EA
WARNING
yyTo prevent TV from falling over, the TV
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause injury.
ENGLISH
ENG
CAUTION
yyDo not place the TV near or on sources
of heat, as this may result in fire or other
damage.
Fix the TV to a table to prevent from tilting
forward, damage, and potential injury.
16
ASSEMBLING AND PREPARING
Securing the TV to a wall (optional)
(Depending upon model)
Using the Kensington security system
(optional)
(Depending upon model)
The Kensington security system connector is
located at the rear of the TV.
For more information of installation and
using, refer to the manual provided with the
Kensington security system or visit
http://www.kensington.com .
Connect the Kensington security system cable
between the TV and a table.
1
ENGLISH
ENG
2
3
Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
Mount the wall brackets with the bolts to
the wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
Connect the eye-bolts and wall brackets
tightly with a sturdy rope.
Make sure to keep the rope horizontal with
the flat surface.
CAUTION
NOTE
yyThe Kensington security system is optional.
You can obtain additional accessories from
your local dealer.
Tidying cables
1
Gather and bind the cables with the cable
management.
2
Gather and bind the cables with the cable
holder on the back of the TV.
Cable Holder
yyMake sure that children do not climb on or
hang on the TV.
NOTE
yyUse a platform or cabinet that is strong
and large enough to support the TV
securely.
yyBrackets, bolts and ropes are optional.
You can obtain additional accessories from
your local dealer.
Cable Management
CAUTION
yyDo not move the TV by holding the cable
holder and cable management, as the
cable holders may break, and injuries and
damage to the TV may occur.
ASSEMBLING AND PREPARING
Mounting on a wall
17
Wall mount bracket (optional)
An optional wall mount can be used with your
LG Television. Consult with your local dealer for
a wall mount that supports the VESA standard
used by your TV model. Carefully attach the wall
mount bracket at the rear of the TV. Install the
wall mount bracket on a solid wall perpendicular
to the floor. If you are attaching the TV to other
building materials, please contact qualified
personnel to install the wall mount. Detailed
instructions will be included with the wall
mount. We recommend that you use an LG
brand wall mount.
LSW430B
MSW240
CAUTION
10 cm
10 cm
10 cm
Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions
for the wall mount kits are described in the
following table.
Model
42/47/55LA6600
47/55LA6610
42/47LA6680
VESA (A x B)
400 x 400
A
B
Standard screw
M6
Number of screws
4
Wall mount bracket MSW240
(optional)
LSW430B
NOTE
yyUse the screws that are listed on the
VESA standard screw specifications.
yyThe wall mount kit includes an installation
manual and necessary parts.
yyThe wall mount bracket is optional. You
can obtain additional accessories from
your local dealer.
yyThe length of screws may differ
depending upon the wall mount. Make
sure to use the proper length.
yyFor more information, refer to the manual
supplied with the wall mount.
ENGLISH
ENG
10 cm
yyDisconnect the power first, and then
move or install the TV. Otherwise electric
shock may occur.
yyIf you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
yyDo not over tighten the screws as this
may cause damage to the TV and void
your warranty.
yyUse the screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the
warranty.
18
MAKING CONNECTIONS
MAKING CONNECTIONS
You can connect various external devices to the TV. Supported external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external
devices. For more information on external device’s connection, refer to the manual provided with
each device.
NOTE
yyIf you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal
input cable to the TV through a DVD recorder or VCR. For more information of recording, refer
to the manual provided with the connected device.
yyThe external device connections shown may differ slightly from illustrations in this manual.
yyConnect external devices to the TV regardless of the order of the TV port.
ANTENNA
yyIf you connect a gaming device to the TV, use the cable supplied
IN with the gaming device.
yyRefer to the external equipment’s manual for operating instructions.
Connecting to an antenna or cable
ENGLISH
ENG
Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations
may differ from the actual items and a RF cable is optional.
VHF Antenna
UHF Antenna
Antenna
ANTENNA
IN
Coaxial (75Ω)
or
CABLE
IN
(*Not Provided)
Wall Jack
Coaxial (75Ω)
(*Not Provided)
Terminal
CAUTION
yyMake sure not to bend the copper wire
of the RF cable.
Copper wire
CABLE
IN
yyComplete all connections between
devices, and then connect the power
cord to the power outlet to prevent
damage to your TV.
Note
yyTo improve the picture quality in a poor
signal area, please purchase a signal
amplifier and install properly.
yyUse a signal splitter to use more than 2
TVs.
yyIf the antenna is not installed properly,
contact your dealer for assistance.
yyDTV Audio Supported Codec: MPEG,
Dolby digital, AAC, HE-AAC
MAKING CONNECTIONS
19
Connecting to a HD receiver, DVD Player, or VCR
Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode.
HDMI Connection
HDMI is the best way to connect a device.
Transmits the digital video and audio signals from an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown in the following illustration.
NOTE
yyUse the latest High Speed HDMI™ Cable with CEC (Customer Electronics Control) function.
yyHigh Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.
yyHDMI Audio Supported Format: Dolby Digital, PCM (Up to 192 kHz, 32 kHz / 44.1 kHz / 48 kHz
/ 96 kHz / 192kHz ), DTS.
Choose any HDMI input port to connect.
It does not matter which port you use.
(*Not Provided)
2
/DVI IN
3 (MHL)
ENGLISH
ENG
HDMI
1(ARC)
DVD / Blu-Ray / HD Cable Box / HD STB
ARC (Audio Return Channel)
yyWhen connected with a high-speed HDMI cable,
digital audio can be sent to a compactible device
without an additional optical audio cable.
yyARC is only supported on the HDMI/DVI IN 1 (ARC)
port. An external audio device that supports ARC
should be connected to HDMI 1 if you wish to use
ARC.
20
MAKING CONNECTIONS
DVI to HDMI Connection
Transmits the digital video signal from an external device to the TV. Connect the external device and
the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal,
connect an audio cable.
NOTE
yyWhen using the HDMI/DVI cable, Single link is only supported.
(*Not Provided)
VIDEO/Y
PB
PR
L/MONO AUDIO R
1(ARC)
COMPONENT IN
/AV IN
2
ENGLISH
ENG
/DVI IN
3 (MHL)
Choose any HDMI input port to connect.
It does not matter which port you use.
PC-AUDIO IN
RED
WHITE
(*Not Provided)
DVI OUT
AUDIO OUT
DVD / Blu-Ray / HD Cable Box
MAKING CONNECTIONS
21
Connecting to a mobile phone
Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from
mobile phones to television sets.
NOTE
3 (MHL)
yyConnect the mobile phone to the HDMI/DVI IN 3 (MHL) port to view the phone screen on the TV.
yyThis only works for the MHL-enabled phone.
yyWith some MHL supporting mobile phones, you can use the TV remote to control the phone.
yyAn MHL passive cable is needed to connect the TV and a mobile phone.
yyRemove the MHL cable from the TV when:
- the MHL function is disabled.
- your mobile device is fully charged in standby mode.
MHL Cable
Mobile phone
ENGLISH
ENG
(*Not Provided)
22
MAKING CONNECTIONS
Component Connection
Transmits analog video and audio signals from an external device to the TV. Connect the external
device and the TV with a component cable as shown in the following illustration.
NOTE
VIDEO/Y
PR
PB
L/MONO AUDIO R
PC-AUDIO IN
RED
WHITE
RED
BLUE
GREEN
ENGLISH
ENG
COMPONENT IN
/AV IN
yyIf cables are installed incorrectly, it could cause the image to display in black and white or with
distorted color.
yyCheck to ensure the cables are matched with the corresponding color connection.
(*Not Provided)
(*Not Provided)
RED
WHITE
RED
BLUE
GREEN
R
L
VIDEO
AUDIO
DVD / Blu-Ray / HD Cable Box
MAKING CONNECTIONS
23
Composite Connection
Transmits analog video and audio signals from an external device to the TV. Connect the external
device and the TV with the composite cable as shown in the following illustration.
NOTE
VIDEO/Y
PR
PB
L/MONO AUDIO R
PC-AUDIO IN
RED
WHITE
YELLOW
(*Not Provided)
RED
WHITE
YELLOW
VIDEO
L (MONO) AUDIO R
VCR / DVD / Blu-Ray / HD Cable Box
ENGLISH
ENG
COMPONENT IN
/AV IN
yyIf you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of
the TV.
yyCheck to ensure the cables are matched with the corresponding color connection.
24
MAKING CONNECTIONS
Connecting to a PC
NOTE
yyIt is recommended to use an HDMI connection for the best image quality.
yyDepending upon the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in
use.
yyIn PC mode, there may be noise associated with the resolution, vertical pattern, contrast or
brightness. If noise is present, change the PC output to another resolution, change the refresh
rate to another rate or adjust the brightness and contrast on the PICTURE menu until the
picture is clear.
yyThe synchronization input form for Horizontal and Vertical frequencies is separate.
yyDepending upon the graphics card, some resolution settings may not allow the image to be
positioned on the screen properly.
yyIf you are using DVI out from a PC, you have to connect analog audio separately. Refer to the
instructions on the next page.
yyWhen using the HDMI/DVI cable, Single link is only supported.
HDMI Connection or DVI to HDMI Connection
Method A: HDMI Connection
3 (MHL)
Choose any HDMI input port to connect.
It does not matter which port you use.
HDMI
2
/DVI IN
(*Not Provided)
PC
3 (MHL)
1(ARC)
ENGLISH
ENG
Choose method A or B to make connection.
2
/DVI IN
3
HDMI
1(ARC)
MAKING CONNECTIONS
25
Method B: DVI to HDMI Connection
3 (MHL)
Choose any HDMI input port to connect.
It does not matter which port you use.
VIDEO/Y
PB
PR
L/MONO AUDIO R
1(ARC)
COMPONENT IN
/AV IN
2
/DVI IN
(*Not Provided)
PC-AUDIO IN
RED
AUDIO OUT
DVI OUT
PC
(PC)
(PC)
RGB
RGB
RGB OUT (PC)
(RGB/HDMI-PC)
(RGB/HDMI-PC)
AUDIO
AUDIO
AUDIO OUT
ENGLISH
ENG
WHITE
(*Not Provided)
26
MAKING CONNECTIONS
Connecting to an Audio System
You may use an optional external audio system instead of the built-in speaker.
Digital Optical Audio Connection
Transmits a digital audio signal from the TV to an external device. Connect the external device and
the TV with the optical audio cable as shown in the following illustration.
NOTE
yyDo not look into the optical output port. Looking at the laser beam may damage your vision.
yyAudio with ACP (Audio Copy Protection) function may block digital audio output.
ENGLISH
ENG
OUT
H/P
OPTICAL
DIGITAL
AUDIO
(*Not Provided)
OPTICAL AUDIO IN
Digital Audio System
MAKING CONNECTIONS
27
Connecting Headphones
You listen to the sound using headphones.
NOTE
yyAUDIO menu options are disabled when headphones are connected.
yyWhen changing AV MODE with headphones connected, the change is applied to video but not
to audio.
yyOptical Digital Audio Out is not available when headphones are connected.
yyHeadphone impedance: 16 Ω
yyMax audio output: 10 mW to 15 mW
yyHeadphone jack size: 0.35 cm
Headphone
OUT
H/P
OPTICAL
DIGITAL
AUDIO
ENGLISH
ENG
(*Not Provided)
Connecting a USB Drive
Connect a USB storage device such as a USB flash thumbdrive, external hard drive, or a USB
memory card reader to the TV and access the Smart Share menu to use various multimedia files.
NOTE
yyTo use Time Machine function, make sure your USB drive is connected to the USB IN 1 Time
Machine Ready port.
yySome USB Hubs may not work. If a USB device connected using a USB Hub is not detected,
connect it to the USB port on the TV directly.
Choose any USB input port to connect.
It does not matter which port you use.
USB
1
2
USB IN
3
(*Not Provided)
USB HUB
28
REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons
on the remote control. Please read this manual carefully
and use the TV correctly. To install batteries, open the
battery cover, replace batteries (1.5 V AAA) matching the
and
ends to the label inside the compartment, and
close the battery cover. To remove the batteries, perform
the installation actions in reverse.
or
CAUTION
yyDo not mix old and new batteries, as this may damage the remote control.
This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote
sensor.
(Depending upon model)
(POWER)
Turns the TV on or off.
(User Guide)
Sees user-guide.
ENGLISH
ENG
RATIO
RATIO
Resizes an image.
INPUT
TV
1
2
3
4
5
6
7
8
9
0
Q.VIEW
LIST
INPUT
Changes the input source. Turns the TV on if it is off.
TV
Number button
Enters numbers.
LIST
Accesses the saved channel list.
- (Dash)
Inserts a dash between numbers such as 2-1 and 2-2.
FAV
CH
VOL
MUTE
Q.MENU
INFO
SMART MY APPS
Returns to the last TV channel.
P
A
G
E
Q.VIEW
Tunes to the last channel viewed.
VOL
Adjusts the volume level.
FAV
Accesses your favorite channel list.
Used for viewing 3D video.
OK
MUTE
Mutes all sounds.
CH
Scrolls through the saved channels.
BACK
GUIDE
EXIT
LIVE TV
REC
PAGE
Moves to the previous or next screen.
REMOTE CONTROL
29
INFO
Shows information on the current program.
RATIO
INPUT
SMART
Accesses the Smart Home menu.
TV
1
2
3
4
5
6
7
8
9
0
Q.VIEW
LIST
MY APPS
Shows the list of Apps.
Q.MENU
Accesses the quick menu.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
OK ꔉ
Selects menus or options and confirms your input.
ꕣ BACK
Returns to the previous level.
FAV
CH
VOL
GUIDE
Displays the program event according to time scheduler.
EXIT
Clears all on-screen displays and returns to TV viewing.
Q.MENU
INFO
SMART MY APPS
Color buttons
These access special functions in some menus.
: Red,
: Green,
: Yellow,
: Blue)
(
OK
BACK
GUIDE
EXIT
REC
Accesses the Time Machine II menu.
SETTINGS
Accesses the main menu.
LIVE TV
REC
SETTINGS AV MODE
, )
Control buttons ( , , ,
Controls the SIMPLINK compatible devices (USB,SIMPLINK).
LIVE TV
Returns to the LIVE TV.
AV MODE
Selects an AV mode.
Accesses the AV devices connected to the TV;
Opens the SIMPLINK menu.
ENGLISH
ENG
MUTE
P
A
G
E
30
REMOTE CONTROL
(Depending upon model)
SETTINGS
Accesses the main menu.
(POWER)
Turns the TV on or off.
INFO
Shows information on the
current program.
TV
GUIDE
Displays the program event
according to time scheduler.
CAPTION
Activates or deactivate the
subtitles.
SMART
Accesses the Smart Home
menu.
RATIO
Resizes an image.
INPUT
Changes the input source.
Turns the TV on if it is off.
MY APPS
Shows the list of Apps.
Navigation buttons
(up/down/left/right)
Scrolls through menus or
options.
Number button
Enters numbers.
ENGLISH
ENG
OK ꔉ
Selects menus or options and
confirms your input.
ꕣ BACK
Returns to the previous
screen.
GUIDE
MY APPS
SMART
EXIT
Clears all on-screen displays
and returns to TV viewing.
LIVE TV
AV MODE
AV MODE
Selects an AV mode.
REC
Adjusts Time Machine II
mode.
Control buttons
( , , ,
, )
Controls the SIMPLINK
compatible devices
(USB,SIMPLINK).
LIVE TV
Returns to the LIVE TV.
Color buttons
These access special
functions in some menus.
: Red,
: Green,
(
: Yellow,
: Blue)
Returns to the last TV channel.
Q.MENU
Accesses the quick menu.
LIST
Accesses the saved channel
list.
- (Dash)
Inserts a dash between
numbers such as 2-1 and 2-2.
Q.VIEW
Alternates between the
two last channels selected
(pressing repeatedly).
REC
VOL
Adjusts the volume level.
FAV
Accesses your favorite
channel list.
Used for viewing 3D video.
MUTE
Mutes all sounds.
CH
Scrolls through the saved
channels.
PAGE
Moves to the previous or next
screen.
Magic Remote Control Functions
31
Magic Remote Control Functions
When the message “Magic remote control battery is low. Change the battery.”
is displayed, replace the battery. To install batteries, open the battery cover,
and
ends to the label inside the
replace batteries (1.5 V AA) matching
compartment, and close the battery cover. Be sure to point the remote control
at the remote control sensor on the TV. To remove the batteries, perform the
installation actions in reverse.
CAUTION
yyDo not mix old and new batteries, as this may damage the remote control.
This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote
sensor.
Pointer (RF transmitter)
(POWER)
Turns the TV on or off.
Navigation buttons
(up/down/left/right)
Scrolls through menus or
options.
BACK
SMART
BACK
Returns to the previous screen.
SMART
Accesses the Smart Home
menu.
Voice recognition
-This is a beta version and only
available in selected functions for
supported models.
-Network connection is required to use
the voice recognition function.
1. Press the Voice recognition button.
2. Speak slowly and precisely.
When a voice is recognized, the
processing message appears on the
screen.
• Use the magic remote control no
further than 10 cm from your face.
/Q.MENU
VOL
CH
/Q.MENU
Accesses the Universal Control.
(Depending upon country)
Accesses the quick menu.
VOL
Adjusts the volume level.
CH
Scrolls through the saved
channels.
Used for viewing 3D video.
(MUTE)
Mutes all sounds.
ENGLISH
ENG
Wheel (OK)
Selects menus or options and
confirms your input.
Scrolls through the saved channels.
If you press the navigation button
while moving the pointer on the
screen, the pointer disappears, and
the Magic remote control works as a
regular remote control.
To display the pointer again, shake
the Magic remote control from side
to side.
32
Magic Remote Control Functions
Registering Magic Remote
Control
1
The Magic Remote Control operates by pairing
with your TV.
How to register the Magic Remote Control
(Wheel)
To register automatically, turn the
TV on and press the
Wheel (OK).
When registration is completed, the
completion message appears on the
screen.
If registration fails, turn the TV off and
back on, then press the
Wheel (OK)
to complete registration.
2
1
If you press
Wheel (OK) on the Magic
remote control, the screen above opens.
It shows information about the current
program and screen.
2
You can select My Apps Menu.
How to Re-register the Magic Remote Control
ENGLISH
ENG
BACK
SMART
1 Press and hold the
BACK and
SMART buttons together for 5
seconds to reset, then register it
by following “How to register the
Magic remote control” above.
2 To re-register the Magic remote
control, press and hold the
BACK
button for 5 seconds toward the TV.
How to use Magic Remote
Control
1 You can move the pointer by moving
the remote up and down or left and
right.
»»If the pointer does not work
properly, wait 10 seconds
and then try again.
2 If the pointer disappears, move
the remote control slightly to left
or right. It will then automatically
appear on the screen.
»»If the pointer has not been
used for a certain period of
time, it will disappear.
Precautions to Take when
Using the Magic Remote
Control
yyUse the Magic remote control within the maximum
communication distance (10 m, 32.8ft). Using the
remote control beyond this distance, or with an
object obstructing it, may cause a communication
failure.
yyA communication failure may occur due to nearby
devices. Electrical devices such as a microwave
oven or wireless LAN product may cause
interference, as these use the same bandwidth (2.4
GHz) as the Magic remote control.
yyThe Magic remote control may be damaged or may
malfunction if it is dropped or receives a heavy
impact.
yyTake care not to bump into nearby furniture or other
people when using the Magic remote control.
yyManufacturer and installer cannot provide service
related to human safety as the applicable wireless
device has possibility of electric wave interference.
yyIt is recommended that an Access Point (AP) be
located more than 1 m (3.28 ft) away from the TV.
If the AP is installed closer than 1 m (3.28 ft), the
Magic remote control may not perform as expected
due to frequency interference.
WATCHING TV
WATCHING TV
Turning the TV on for the first
time
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.
1
Connect the power cord to a power outlet.
2
In Standby mode, press the power button
on the remote control to turn the TV on.
The Initial setting screen appears if you turn
the TV on for the first time.
NOTE
yyYou can also access Initial Setting by
accessing OPTION in the main menu.
Follow the on-screen instructions to
customize your TV settings according to
your preferences.
Language Selection
Selects a language to
display.

Environment Selection

Time Zone Setting

Network Connection

Auto Tuning

Setting is complete
Select Home for the home
environment.
Selects the time zone and
daylight saving.
(Depending upon country)
Sets your network to
enable network-related
features on the TV.
Scans and saves available
channels automatically.
Confirms the setting
options.

Experience Magic
Remote Control
Simple guide of Magic
Remote Control
(Depending upon model)
NOTE
yySelect Home when prompted. Store
mode puts the TV in demo mode.
yyIf you select Store, the any customized
settings will switch back to the default
settings of Store in 5 minutes.
4
When the basic settings are complete,
press the
Wheel (OK).
NOTE
yyIf you do not complete the Initial setting, it
will appear whenever the TV turns on.
yyDisconnect the power cord from the
power outlet when you do not use the TV
for a long period of time.
5
To turn the TV off, press the power button
on the remote control.
ENGLISH
ENG
3
33
34
Using the User guide
Using the user guide
1
User Guide
Check with your remote control right now.
User Guide allows you to easily access detailed
TV information.
1
2
To use input device
To set time options
Press
SMART button to access the
Smart Home menu.
Select User Guide and press the
(OK) button.
To set TV lock options
CHANNEL Setting
PICTURE, SOUND Setting
OPTION
Wheel
To set language
LG SMART Function
To set caption
Advanced Function
To set other options
Information
Index
2 3
4
Online User Guide
5
(Depending upon country)
1
2

ENGLISH
ENG
User Guide
Shows the video you were watching.
Guide categories.
3
List of topics in the current category.
You can use
/
button to move
between pages.
4
An index of key words present in the User
Guide.
5
Provides the detailed information on
the functions of LG Smart TV when the
Internet is connected.
(It may not be available depending upon
the country/language.)
OPTION > To set language
1
SMART
 Settings  OPTION  Language
Selects Menu Language and Audio Language displayed on the screen.
Menu
Language
Audio
Language
Selects a screen menu language.
[In Digital Mode Only]
When watching a digital broadcast containing several
audio languages, you can select the language you want.
Select the language to make voice search
Voice Search ✎ O
nly the voice search adopted model support
Language
this setting.
2
Try Now
Close
Index
Online User Guide
1
Shows the description of the selected
menu. You can use
/
to move
between pages.
2
Moves to the selected menu directly from
the User Guide.
SPECIFICATIONS
35
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
Power requirement
AC 100 - 240 V ~ 50 / 60 Hz
Television System
Analog : NTSC, PAL-M/N
Digital : SBTVD
Program Coverage
VHF 2 - 13, UHF 14 - 69, DTV 2 - 69, CATV 1 - 135
External Antenna Impedance
75 Ω
Environment
condition
Operating Temperature
0 - 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 - 60 °C
Storage Humidity
Less than 85 %
47LA6600
(47LA6600-SA)
47LA6600
(47LA6600-SZ)
47LA6610
(47LA6610-SF)
47LA6680
(47LA6680-SD)
42LA6680
(42LA6680-SD)
Dimensions (Width x With stand
Height x Depth)
Without stand
Weight
957 x 635 x 294 (mm)
1,069 x 695 x 327 (mm)
957 x 574 x 35 (mm)
1,069 x 637 x 35 (mm)
With stand
14.3 Kg
17.2 Kg
Without stand
12.4 Kg
14.7 Kg
1.1 A / 110 W
1.2 A / 120 W
Current Value / Power consumption
MODELS
Dimensions (Width x With stand
Height x Depth)
Without stand
Weight
With stand
Without stand
Current Value / Power consumption
55LA6600
(55LA6600-SA)
55LA6600
(55LA6600-SZ)
55LA6610
(55LA6610-SF)
1,238 x 802 x 343 (mm)
1,238 x 733 x 35.2 (mm)
22.7 Kg
20 Kg
1.4 A / 140 W
ENGLISH
ENG
MODELS
42LA6600
(42LA6600-SA)
42LA6600
(42LA6600-SZ)
36
SPECIFICATIONS
HDMI (DTV) supported mode
Resolution
720 x 480p
720 x 576p
Component port connecting information
Horizontal
Vertical
Frequency (kHz) Frequency (Hz)
31.47
59.94
31.50
60.00
31.25
37.50
1280 x 720p 44.96
45.00
28.125
1920 x 1080i 33.72
33.75
26.97
27.00
33.71
1920 x 1080p 33.75
56.25
67.432
67.50
50.00
50.00
59.94
60.00
50.00
59.94
60.00
23.976
24.00
29.97
30.00
50.00
59.94
60.00
ENGLISH
ENG
Component supported mode
Horizontal
Frequency (kHz)
15.73
15.73
31.47
31.50
Vertical
Frequency (Hz)
59.94
60.00
59.94
60.00
720 x 576i
15.625
50.00
720 x 576p
31.25
50.00
Resolution
720 x 480i
720 x 480p
37.50
44.96
1280 x 720p
45.00
28.125
1920 x 1080i 33.72
33.75
26.97
27.000
33.71
1920 x 1080p 33.75
56.25
67.432
67.500
50.00
59.94
60.00
50.00
59.94
60.00
23.976
24.000
29.97
30.000
50.00
59.94
60.00
Component ports on the TV
Video output ports
on DVD player
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
HDMI (PC) supported mode
Horizontal
Frequency (kHz)
Resolution
Vertical
Frequency (Hz)
640 x 480
31.469
59.94
800 x 600
37.879
60.31
1024 x 768
48.363
60.00
1152 x 864
54.348
60.053
1360 x 768
47.712
60.015
1280 x 1024
63.981
60.020
1920 x 1080
67.5
60.00
Wireless LAN module (WN8122E1) specification
Standard
IEEE802.11a/b/g/n
2400 to 2483.5 MHz
Frequency Range 5150 to 5250 MHz
5725 to 5850 MHz
Output Power
(Max.)
802.11a: 16.5 dBm
802.11b: 16 dBm
802.11g: 15.5 dBm
802.11n - 2.4GHz: 15.5 dBm
802.11n - 5GHz: 16.5 dBm
yyBecause band channel used by the
country could be different, the user
can not change or adjust the operating
frequency and this product is set for the
regional frequency table.
yyContains FCC ID: BEJWN8122E1
Contains IC: 2703H-WN8122E1
Bluetooth module (BM-LDS401) specification
Standard
Frequency Range
Output Power (Max.)
Bluetooth Version 3.0
2400 ~ 2483.5 MHz
10 dBm or lower
yyContains FCC ID: BEJLDS401
Contains IC: 2703H-LDS401
SPECIFICATIONS
37
3D supported mode (For 3D models)
yyVideo, which is input as below media contents is switched into the 3D screen automatically.
yyThe method for 3D digital broadcast may differ depending upon the signal environment. If video
is not switched automatically into 3D, manually convert the settings to view 3D images.
3D supported mode automatically
Input
Signal
640 x 480
480p
576p
720p
1080i
1080p
Vertical
Frequency (Hz)
31.469 / 31.5
62.938 / 63
31.469 / 31.5
S/S (Half), T&B, S/S (Full)
59.94 / 60
62.938 / 63
31.25
37.50
50
44.96 / 45
59.94 / 60
75
50
89.91 / 90
59.94 / 60
28.125
50
33.72 / 33.75
59.94 / 60
56.25
50
67.432 / 67.50
59.94 / 60
26.97 / 27
23.97 / 24
28.125
25
33.72 / 33.75
29.976 / 30
43.94 / 54
23.97 / 24
56.25
25
67.432 / 67.5
29.976 / 30
56.25
50
67.432 / 67.5
59.94 / 60
USB
1080p
33.75
30
DLNA
1080p
33.75
30
DTV
F/P, L/A
S/S (Half), T&B, S/S (Full)
F/P, L/A
50
62.5
Playable 3D video format
S/S (Half), T&B, S/S (Full)
F/P, L/A
S/S (Half), T&B, S/S (Full)
F/P, L/A
S/S (Half), T&B, S/S (Full)
F/P, F/A
S/S (Half), T&B, S/S (Full)
F/P, L/A
S/S (Half), T&B
S/S (Half), T&B,
C/B, MPO (Photo), JPS (Photo)
Signal
Playable 3D video format
Frame Compatible
S/S (Half), T&B
S/S : Side by Side, S/S Full :Side by Side Full, S/S Half :Side by Side Half,
T/B : Top & Bottom, F/P : Frame Packing, F/A : Field Alternative, L/A : Line Alternative,
C/B : Checker Board, R/I : Row Interleaving, C/I: Column Interleaving, F/S : Single Frame Sequential
ENGLISH
ENG
HDMI
Horizontal
Frequency (kHz)
38
SPECIFICATIONS / external control device setup
3D supported mode manually
Signal
Input
DTV
Horizontal
Frequency
(kHz)
Resolution
Vertical
Frequency
(Hz)
HD / SD
-
-
ATV(CVBS)
SD
-
-
Component
HD / SD
-
-
1024 x 768
48.36
1360 x 768
47.71
1920 x 1080
67.5
HDMI-PC
ENGLISH
ENG
HDMI-DTV
-
-
31.5
60
576P
31.25
50
37.5
50
45
60
28.12
50
33.75
60
1080p
USB ,DLNA
(Movie)
USB, DLNA
(Photo)
Miracast™ /
WiDi
2D to 3D, S/S (Half), T&B, C/B,
F/S, R/I, C/I
Others
1080i
2D to 3D, S/S (Half), T&B
60
480P
720p
Playable 3D video format
27
24
28.12
25
33.75
30
2D to 3D, S/S (Half), T&B
2D to 3D, S/S (Half), T&B, C/B, F/S, R/I, C/I
2D to 3D, S/S (Half), T&B
2D to 3D, S/S (Half), T&B, C/B,
R/I, C/I
56.25
50
67.5
60
Under 704 x 480
-
-
2D to 3D
Over 704 x 480
interlaced
-
-
2D to 3D, S/S (Half), T&B
Over 704 x 480
progressive
-
50 / 60
2D to 3D, S/S (Half), T&B,C/B, F/S, R/I, C/I
-
others
2D to 3D, S/S (Half), T&B, C/B, R/I, C/I
Under 320 x 240
-
-
2D to 3D
Over 320 x 240
-
-
2D to 3D, S/S (Half), T&B
1024 x 768p
-
30 / 60
1280 x 720p
-
30 / 60
1920 x 1080p
-
30 / 60
Others
-
-
2D to 3D, S/S (Half), T&B,
C/B, F/S, R/I, C/I
2D to 3D, S/S (Half), T&B
2D to 3D
external control device setup
To obtain the external control device setup information, please visit www.lg.com .
MAINTENANCE / TROUBLESHOOTING
39
MAINTENANCE
Cleaning Your TV
Clean your TV regularly to keep it at peak performance and to extend the product lifespan.
CAUTION
yyMake sure to turn the power off and disconnect the power cord and all other cables first.
yyWhen the TV is left unattended or unused for a long time, disconnect the power cord from the
wall outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
ENGLISH
ENG
yyDo not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in
scratches on the screen and image distortions.
yyDo not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air
fresheners, lubricants, as these may damage the screen’s finish and cause discoloration.
yyDo not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock,
or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control the TV with
the remote control.
yyCheck the remote control sensor on the product and try again.
yyCheck if there is any obstacle between the product and the remote control.
to ,
to
yyCheck if the batteries are still working and properly installed (
No image display and no
sound is produced.
yyCheck if the product is turned on.
yyCheck if the power cord is connected to a wall outlet.
yyCheck if there is a problem in the wall outlet by connecting other products.
The TV turns off suddenly.
yyCheck the power control settings. The power supply may be interrupted.
yyCheck if the Off Time / Sleep Timer feature is activated in the Time settings.
yyIf there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
).
The model and serial numbers of the TV are
located on the back and one side of the TV.
Record them below should you ever need service.
MODEL
SERIAL
OWNER’S MANUAL
EXTERNAL CONTROL
DEVICE SETUP
Please read this manual carefully before operating the set and retain it for
future reference.
www.lg.com
2
KEY CODES
ENGLISH
ENG
KEY CODES
• This feature is not available for all models.
Code
(Hexa)
Function
Note
Code
(Hexa)
Function
Note
00
CH +, PR +
R/C Button
45
Q.Menu
R/C Button
01
CH -, PR -
R/C Button
4C
List, - (ATSC Only)
R/C Button
02
Volume +
R/C Button
53
List
R/C Button
03
Volume -
R/C Button
5B
Exit
R/C Button
06
> (Arrow Key / Right Key)
R/C Button
61
Blue
R/C Button
07
< (Arrow Key / Left Key)
R/C Button
63
Yellow
R/C Button
08
Power
R/C Button
71
Green
R/C Button
09
Mute
R/C Button
72
Red
R/C Button
0B
Input
R/C Button
79
Ratio / Aspect Ratio
R/C Button
0E
SLEEP
R/C Button
91
AD (Audio Description)
R/C Button
0F
TV, TV/RAD
R/C Button
7A
User Guide
R/C Button
R/C Button
7C
Smart / Home
R/C Button
10 - 19 Number Key 0 - 9
1A
Q.View / Flashback
R/C Button
7E
SIMPLINK
R/C Button
1E
FAV (Favorite Channel)
R/C Button
8E
►► (Forward)
R/C Button
20
Text (Teletext)
R/C Button
8F
◄◄ (Rewind)
R/C Button
21
T. Opt (Teletext Option)
R/C Button
AA
Info
R/C Button
28
Return (BACK)
R/C Button
AB
Program Guide
R/C Button
30
AV (Audio / Video) Mode
R/C Button
B0
► (Play)
R/C Button
39
Caption/Subtitle
R/C Button
B1
ꕗ (Stop / Live TV)
R/C Button
40
Λ (Arrow Key / Cursor Up)
R/C Button
BA
ꕘ (Freeze / Slow Play /
Pause)
R/C Button
41
V (Arrow Key / Cursor
Down)
R/C Button
BD
ꔄ (REC)
R/C Button
42
My Apps
R/C Button
DC
3D
R/C Button
43
Menu / Settings
R/C Button
9F
App / *
R/C Button
44
OK / Enter
R/C Button
* Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel.
(For South Korea, Japan, North America, Latin America except Colombia models)
EXTERNAL CONTROL DEVICE SETUP
3
• Image shown may differ from your TV.
Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer
or an A/V control system) to control the product’s functions externally.
Note: The type of control port on the TV can be different between model series.
* Please be advised that not all models support this type of connectivity.
* Cable is not provided.
USB to Serial converter with USB Cable
USB IN
USB Type
(PC)
(TV)
• LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product
ID :IN0x2008) USB to serial converter
RS-232C
(CONTROL & SERVICE)
which is not made nor provided by LG.
• It can be purchased from computer stores that carry accessories for IT support professionals.
(TV)
1
3
(PC)
2
SERVICE ONLY
(PC)
(TV)
1
3
(PC)
RS-232C IN
2
RS-232C IN
(CONTROL & SERVICE)
(CONTROL & SERVICE)
(TV)
ENGLISH
ENG
EXTERNAL CONTROL DEVICE SETUP
USB USB
IN IN
4
EXTERNAL CONTROL DEVICE SETUP
(PC)
(PC)
RS-232C IN
(CONTROL & SERVICE)
Phone jack Type
RS-232C
• You need to purchase the phone-jack to RS-232 cable required
for theIN connection between the PC and
(CONTROL & SERVICE)
the TV, which is specified in the manual.
(TV)
(TV)
(PC)
(PC)
* For other models, connect to the USB port.
1
3
(PC)
(PC)
1
3
2
2
SERVICE
ONLY ONLY
SERVICE
ENGLISH
ENG
RS-232C with RS-232C Cable (Legacy)
(TV)
(TV)
(TV)
(TV)
-- This connection can only be used for the following models: 55/47/39LN5450-UA,
55/50/47/42LN5400-UA, 42/39/32LN5300-UA, and 37/32LN530B-UA.
1
3
(PC)
(PC)
1
3
RS-232C IN
(CONTROL & SERVICE)
2
RS-232C IN
(TV)
(TV)
(CONTROL & SERVICE)
2
-- This connection can only be used for the following models: 42/50PN4500-UA, 50/60PN5300-UF,
50/60PN6500-UA, and 60PN6550-UA.
Customer Computer
RS-232C configurations
3-Wire Configurations(Not standard)
1
5
PC
RS-232C IN
RXD
2
2
TXD
TXD
3
1
RXD
GND
5
3
GND
(CONTROL & SERVICE)
RS-232C IN
(CONTROL & SERVICE)
6
OR
9
RS-232C
(Serial port)
TV
RXD
3
2
TXD
TXD
2
1
RXD
GND
5
3
GND
D-Sub 9
Phone
Set ID
For Set ID number, see "Real Data Mapping" on p.6
1. Press SETTINGS to access the main menus.
2. Press the Navigation buttons to scroll to OPTION and press OK.
3. Press the Navigation buttons to scroll to SET ID and press OK.
4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.
5. When you are finished, press EXIT.
EXTERNAL CONTROL DEVICE SETUP
5
• Baud rate : 9600 bps (UART)
• Data length : 8 bits
• Parity : None
ENGLISH
ENG
Communication Parameters
• Stop bit : 1 bit
• Communication code : ASCII code
• Use a crossed (reverse) cable.
Command reference list
(Depending on model)
COMMAND1 COMMAND2
DATA
(Hexadecimal)
01. Power off k
a
00
02. Aspect
Ratio
k
c
(p.7)
03. Screen
Mute
k
d
(p.7)
k
e
00 to 01
k
f
00 to 64
06. Contrast
k
g
00 to 64
07.
Brightness
k
h
00 to 64
04. Volume
Mute
05. Volume
Control
08. Color/
Colour
k
i
00 to 64
09. Tint
k
j
00 to 64
10.
Sharpness
k
k
00 to 32
11. OSD
Select
k
l
00 to 01
m
00 to 01
12. Remote
Control Lock k
Mode
COMMAND1 COMMAND2
DATA
(Hexadecimal)
13. Balance
14. Color
(Colour)
Temperature
15. ISM
Method (Only
Plasma TV)
16. Energy
Saving
17. Tune
Command
18. Channel
(Programme)
Add/Del(Skip)
k
t
00 to 64
x
u
00 to 64
j
p
(p.8)
j
q
00 to 05
m
a
(p.8)
m
b
00 to 01
19. Key
m
c
Key Codes
20. Control
Back Light,
Control Panel
Light
21. Input
select (Main)
22. 3D (Only
3D models)
23. Extended
3D (Only 3D
models)
m
g
00 to 64
x
b
(p.10)
x
t
(p.11)
x
v
(p.11)
* Note: During USB operations such as DivX or EMF, all commands except Power(ka) and Key(mc) are
not executed and treated as NG.
6
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the TV. (j, k, m or x)
[Command 2] : Second command to control the TV.
[Set ID]
:You can adjust the [Set ID] to choose desired monitor ID number in option menu.
Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set
can be controlled.
* [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to 0x63) on
transmission/receiving protocol.
[DATA]
: To transmit command data (hexadecimal). Transmit ‘FF’ data to read status of command.
[Cr]
: Carriage Return - ASCII code ‘0x0D’
[ ]
: Space – ASCII code ‘0x20’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the
data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from
non-viable functions or communication errors.
Data 00: Illegal Code
Real data mapping (Hexadecimal b Decimal)
* When you enter the [data] in hexadecimal, refer to following conversion table.
* Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.
00 : Step 0
01 : Step 1 (Set ID 1)
...
0A : Step 10 (Set ID 10)
...
0F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
...
32 : Step 50 (Set ID 50)
33 : Step 51 (Set ID 51)
...
63 : Step 99 (Set ID 99)
...
C7 : Step 199
C8 : Step 200
...
FE : Step 254
FF : Step 255
...
01 00 : Step 256
...
27 0E : Step 9998
27 0F : Step 9999
...
EXTERNAL CONTROL DEVICE SETUP
7
01. Power (Command: k a)
►► To control Power Off of the set.
Transmission[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
►► To Show Power On. (Works TV is On Only)
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Ack [a][ ][Set ID][ ][OK][01][x]
* Similarly, if other functions transmit ‘FF’ data
based on this format, Acknowledgement feedback
presents status about each function.
02. Aspect Ratio (Command: k c)
(Main Picture Size)
►► To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
Aspect Ratio in the Q.MENU. or PICTURE menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01 : Normal screen 07 : 14:9
(4:3)
(Europe, Colombia, Mid-East,
02 : Wide screen
Asia except South Korea and
(16:9)
Japan)
04 : Zoom
09 : * Just Scan
05 : Zoom 2
0B : Full Wide
(Latin America
(Europe, Colombia, Midexcept Colombia
East, Asia except South
Only)
Korea and Japan)
06 : Set by Program/ 10 to 1F : C
inema Zoom 1
Original
to 16
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In DTV/HDMI/Component mode (high-definition),
Just Scan is available.
* Full wide mode may work differently based on
model and is supported for DTV fully, and ATV,
AV partially.
03. Screen Mute (Command: k d)
* In case of video mute on only, TV will display On
Screen Display(OSD). But, in case of Screen mute
on, TV will not display OSD.
04. Volume Mute (Command: k e)
►► To control volume mute on/off.
You can also adjust mute using the MUTE button
on remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
Ack [e][ ][Set ID][ ][OK/NG][Data][x]
05. Volume Control (Command: k f)
►► To adjust volume.
You can also adjust volume with the volume
buttons on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [f][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
►► To adjust screen contrast.
You can also adjust contrast in the PICTURE
menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
07. Brightness (Command: k h)
►► To adjust screen brightness.
You can also adjust brightness in the PICTURE
menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [h][ ][Set ID][ ][OK/NG][Data][x]
►► To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 00 : Screen mute off (Picture on)
Video mute off
01 : Screen mute on (Picture off)
10 : Video mute on
Ack [d][ ][Set ID][ ][OK/NG][Data][x]
08. Color/Colour (Command: k i)
►► To adjust the screen Color(Colour).
You can also adjust colour in the PICTURE menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [i][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
ENG
* Commands may work differently depending on model and signal.
8
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
09. Tint (Command: k j)
14.Color(Colour) Temperature (Command: x u)
►► To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
►► To adjust colour temperature. You can also adjust
Color(Colour) Temperature in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 00 to Green : 64
Ack [j][ ][Set ID][ ][OK/NG][Data][x]
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
10. Sharpness (Command: k k)
15. ISM Method (Command: j p) (Only Plasma TV)
►► To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE
menu.
►► To control the ISM method. You can also adjust
ISM Method in OPTION menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 32
Ack [k][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select (Command: k l)
►► To select OSD (On Screen Display) on/off when
controlling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00 : O
SD off
01 : OSD on
Ack [l][ ][Set ID][ ][OK/NG][Data][x]
12. Remote control lock mode (Command: k m)
►► To lock the front panel controls on the monitor and
remote control.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00 : Lock off
Transmission [j][p][ ][Set ID][ ][Data][Cr]
Data Min : 02: Orbiter
08: Normal
20: Color(Colour) Wash
Ack [p][ ][Set ID][ ][OK/NG][Data][x]
16.Energy Saving (Command: j q)
►► To reduce the power consumption of the TV. You
can also adjust Energy Saving in PICTURE menu.
Transmission [j][q][ ][Set ID][ ][Data][Cr]
Data
00 : Off
01 : Minimum
02 : Medium
03 : Maximum
04 : Auto
05 : Screen off
* (Depending on model)
Ack [q][ ][Set ID][ ][OK/NG][Data][x]
01 : Lock on
Ack [m][ ][Set ID][ ][OK/NG][Data][x]
* If you are not using the remote control, use this
mode.
When main power is off & on (plug-off and plug-in,
after 20 - 30 seconds), external control lock is
released.
* In the standby mode (DC off by off timer or ‘ka’,
‘mc’ command), and if key lock is on, TV will not
turn on by power on key of IR & Local Key.
13. Balance (Command: k t)
►► To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [t][ ][Set ID][ ][OK/NG][Data][x]
17.Tune Command (Command: m a)
* This command may work differently depending on
model and signal.
• For Europe, Mid-East, Colombia, Asia except
South Korea and Japan Model
►► Select channel to following physical number.
Transmission [m][a][ ][Set ID][ ][Data 00][ ]
[Data 01][ ][Data 02][Cr]
* Analogue Terrestrial/Cable
[Data 00][Data 01] Channel Data
Data 00 : High byte channel data
Data 01 : Low byte channel data
- 00 00 ~ 00 C7 (Decimal : 0 ~ 199)
Data 02 : Input Source (Analogue)
- 00 : Terrestrial TV (ATV)
- 80 : Cable TV (CATV)
EXTERNAL CONTROL DEVICE SETUP
[Data 00][Data 01]: Channel Data
Data 00 : High Channel data
Data 01 : Low Channel data
- 00 00 ~ 27 0F (Decimal: 0 ~ 9999)
Data 05: Input Source (Analogue)
- 00 : Terrestrial TV (ATV)
- 01 : Cable TV (CATV)
* Digital Terrestrial/Cable
Data 00 : xx (Don't care)
Data 02 : Input Source (Digital)
- 10 : Terrestrial TV (DTV)
- 20 : Terrestrial Radio (Radio)
- 40 : Satellite TV (SDTV)
- 50 : Satellite Radio (S-Radio)
- 90 : Cable TV (CADTV)
- a0 : Cable Radio (CA-Radio)
[Data 01][Data 02]: Major Channel Number
Data 01 : High byte Channel Data
Data 02 : Low byte Channel Data
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data 04]: Minor Channel Number
Data 03 : High byte Channel Data
Data 04 : Low byte Channel Data
* Tune Command Examples:
1. Tune to the analogue terrestrial (PAL) Channel 10.
Set ID = All = 00
Data 00 & 01 = Channel Data is 10 = 00 0a
Data 02 = Analogue Terrestrial TV = 00
Result = ma 00 00 0a 00
Data 05 : Input Source (Digital)
- 02 : Terrestrial TV (DTV) – Use Physical Channel
Number
- 06 : Cable TV (CADTV) – Use Physical Channel
Number
- 22 : Terrestrial TV (DTV) – Don’t Use Physical
Channel Number
- 26 : Cable TV (CADTV) - Don’t Use Physical
Channel Number
- 46 : Cable TV (CADTV) – Use Major Channel
Number Only (One Part Channel)
Two bytes are available for each major and minor
channel data, but usually the low byte is used alone
(high byte is 0).
2. Tune to the digital terrestrial (DVB-T) Channel 01.
Set ID = All = 00
Data 00 & 01 = Channel Data is 1 = 00 01
Data 02 = Digital Terrestrial TV = 10
Result = ma 00 00 01 10
3. Tune to the satellite (DVB-S) Channel 1000.
Set ID = All = 00
Data 00 & 01 = Channel Data is 1000 = 03 E8
Data 02 = Digital Satellite TV = 40
Result = ma 00 03 E8 40
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][x][a][ ][Set ID][ ][NG][Data 00][x]
• For South Korea, North/Latin America except
Colombia Model
►► To tune channel to following physical/major/minor
number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Digital channels have a Physical, Major, and Minor
channel number. The Physical number is the actual
digital channel number, the Major is the number that
the channel should be mapped to, and the Minor is
the sub-channel. Since the ATSC tuner automatically
maps the channel from the Major / Minor number,
the Physical number is not required when sending a
command in Digital.
* Analogue Terrestrial/Cable
Data 00 : Physical Channel Number
- Terrestrial (ATV) : 02~45 (Decimal: 2 ~ 69)
- Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125)
[Data 01 ~ 04]: Major/Minor Channel Number
Data 01 & 02: xx (Don't care)
Data 03 & 04: xx (Don't care)
* Tune Command Examples:
1.Tune to the analogue cable (NTSC) channel 35.
Set ID = All = 00
Data 00 = Channel Data is 35 = 23
Data 01 & 02 = No Major = 00 00
Data 03 & 04 = No Minor = 00 00
Data 05 = Analogue Cable TV = 01
Total = ma 00 23 00 00 00 00 01
2.Tune to the digital terrestrial (ATSC) channel 30-3.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Minor is 3 = 00 03
Data 05 = Digital Terrestrial TV = 22
Total = ma 00 00 00 1E 00 03 22
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]
• For Japan Model
►► To tune channel to following physical/major/minor
number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
* Digital Terrestrial/Satellite
Data 00: xx (Don't care)
ENGLISH
ENG
* Digital Terrestrial/Cable/Satellite
9
10 EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
[Data 01][Data 02]: Major Channel Number
Data 01: High byte Channel Data
Data 02: Low byte Channel Data
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data 04]: Minor/Branch Channel Number
(Don’t care in Satellite)
Data 03: High byte Channel Data
Data 04: Low byte Channel Data
Data 05 : Input Source (Digital/Satellite for Japan)
- 02 : Terrestrial TV (DTV)
- 07 : BS (Broadcasting Satellite)
- 08 : CS1 (Communication Satellite 1)
- 09 : CS2 (Communication Satellite 2)
* Tune Command Examples:
1 Tune to the digital terrestrial (ISDB-T) channel 17-1.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 17 = 00 11
Data 03 & 04 = Minor/Branch is 1 = 00 01
Data 05 = Digital Terrestrial TV = 02
Total = ma 00 00 00 11 00 01 02
20. Control Back Light (Command: m g)
• For LCD TV / LED TV
►► To control the back light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
Control Panel Light (Command: m g)
• For Plasma TV
►► To control the panel light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
21. Input select (Command: x b)
(Main Picture Input)
►► To select input source for main picture.
2. Tune to the BS (ISDB-BS) channel 30.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Don’t Care = 00 00
Data 05 = Digital BS TV = 07
Total = ma 00 00 00 1E 00 00 07
Transmission [x][b][ ][Set ID][ ][Data][Cr]
* This feature is varied based on the model.
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]
18. Channel(Programme) Add/Del(Skip)
(Command: m b)
►► To skip current channel(programme) for next time.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Del(ATSC,ISDB)/Skip(DVB)
01 : Add
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* Set the saved channel status to del(ATSC, ISDB)/
skip(DVB) or add.
19. Key (Command: m c)
►► To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data Key code - p.2.
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
Data
00 : DTV
01 : CADTV
02 : Satellite DTV
10 : ATV
ISDB-BS (Japan)
03 : ISDB-CS1 (Japan)
04 : ISDB-CS2 (Japan)
11 : CATV
20 : AV or AV1
21 : AV2
40 : Component1
41 : Component2
90 : HDMI1
92 : HDMI3
91 : HDMI2
93 : HDMI4
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* This function depends on model and signal.
EXTERNAL CONTROL DEVICE SETUP
23. Extended 3D(Command: x v) (only 3D models)
(Depending on model)
(Depending on model)
►► To change 3D option for TV.
►► To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01]
[ ][Data 02][ ][Data 03][Cr]
Data Structure
[Data 00]00 : 3D On
01 : 3D Off
02 : 3D to 2D
03 : 2D to 3D
[Data 01]00 : Top and Bottom
01 : Side by Side
02 : Check Board
03 : Frame Sequential
04 : Column interleaving
05 : Row interleaving
[Data 02]00 : Right to Left
01 : Left to Right
[Data 03]3D Effect(3D Depth): Min : 00 - Max : 14
(*transmit by Hexadecimal code)
* If [Data 00] is 00 (3D On), [Data 03] has no
meaning.
* If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data
01], [Data 02] and [Data 03] have no meaning.
* If [Data 00] is 03(2D to 3D), [Data 01] and [Data 02]
have no meaning.
* If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data
03] works when 3D Mode (Genre) is manual only.
* All 3D pattern options ([Data 01]) may not be
available according to broadcasting/video signal.
[Data 00]
[Data 01]
[Data 02]
[Data 03]
00
O
O
O
01
X
X
X
02
X
X
X
03
X
X
O
X : don’t care
Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02]
[Data03][x]
[t][ ][Set ID][ ][NG][Data00][x]
Transmission [x][v][ ][Set ID][ ][Data 00][ ]
[Data 01][Cr]
[Data 00]3D option
00 : 3D Picture Correction
01 : 3D Depth (3D Mode is Manual Only)
02 : 3D Viewpoint
06 : 3D Color Correction
07 : 3D Sound Zooming
08 : Normal Image View
09 : 3D Mode (Genre)
[Data 01]It has own range for each 3D option
determined by [Data 00].
1) When[Data 00] is 00
00 : Right to Left
01 : Left to Right
2) When[Data 00] is 01, 02
DataMin: 0 - Max: 14 (*transmit by Hexadecimal
code)
Data value range(0 - 20) converts Viewpoint range
(-10 - +10) automatically (Depending on model)
* This option works when 3D Mode (Genre) is manual
only.
3) When[Data 00] is 06, 07
00 : Off
01 : On
4) When[Data 00] is 08
00 : Revert to 3D video from 3D-to-2D
converted 3D video
01 : Change 3D video to 2D video, except
2D-to-3D video
* If conversion condition doesn’t meet, command is
treated as NG.
5) When [Data 00] is 09
00 : Standard
02 : Cinema
04 : Manual
01 : Sport
03 : Extreme
Ack [v][ ][Set ID][ ][OK][Data00][Data01][x]
[v][ ][Set ID][ ][NG][Data00][x]
ENGLISH
ENG
22. 3D(Command: x t) (only 3D models)
11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement