LG DVD-2240N Owner's manual

LG DVD-2240N Owner's manual
DVD and CD
PLAYER
OWNER'S MANUAL
MODEL
:
DVD-2240N
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
PAGE 2
INTRODUCTION
Precautions
Safety
The
lightning flash
equilateral triangle,
WARNING
RISK OF ELECTRIC SHOCK
WARNING
:
RISQUE DE CHOC ELECTRIQUE NE
constitute
PAS OUVRIR
TO REDUCE THE RISK OF
within
symbol,
user
an
to the
risk of electric shock to persons.
a
The exclamation
ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
operating
literature
within
point
intended to alert the
SERVICE PERSONNEL.
WARNING:
arrowhead
presence of uninsulated 'dangerous voltage' within the
product's enclosure that may be of sufficient magnitude to
DO NOT OPEN
AVIS
with
is intended to alert the
user
and maintenance
TO REDUCE THE RISK OF FIRE OR ELECTRIC
accompanying
SHOCK,
equilateral triangle is
important
(servicing) instructions in the
appliance.
an
to the presence of
the
DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
CAUTION:
TO PREVENT ELECTRIC
SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE
SLOT,
FULLY
INSERT.
ATTENTION:
POUR EVITER LES CHOCS
ELECTRIQUE,
INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOUD.
CAUTION:
This
Player employs a Laser System.
product, please read this owner's manual carefully and
future reference, should the unit require maintenance, contact an authorized service
service procedure.
To
Digital
ensure
Video Disc
proper
use
of this
Use of controls, adjustments or the performance of
result herein hazardous radiation exposure.
procedures
other than those
retain for
location-see
specified
may
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation
when open the enclosure. DO NOT STARE INTO BEAM.
FCC NOTICE:
This
has been tested and found to
equipment
pursuant
to
part
against harmful interference in a
equipment generates, uses,
with the limits for
comply
15 of the FCC Rules. These limits
are
designed
to
a
Class B
provide
digital device,
protection
reasonable
residential installation
This
and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this
equipment does cause harmful interference to radio or television reception, which can
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
be
determined
-
-
-
Reorient
relocate the
or
Increase the
Connect the
separation
equipment
receiving
antenna.
between the
equipment
into
on a
an
outlet
and receiver.
circuit different from that to which the receiver is
connected.
-
FCC WARNING:
Consult the dealer
Changes
or
or an
experienced
radio/TV technician for
modifications not
void the user's
authority
to
expressly approved by
operate the equipment.
INDUSTRY CANADA REQUIREMENT :
This Class B digital apparatus meets all
Equipment Regulations.
Cet appareil numeruque
de la classe B
the
requirements
respecte
help.
party responsible for compliance could
of the Canadian
toutes les
exigences
Interference-Causing
du
Reglement
sur
materiel brouilleur du Canada.
RECORD YOUR MODEL NUMBER
(Now, while
you
can see
it)
The model and serial number of your new DVD
player are located on the back of the DVD player cabinet. For your future
convenience, we suggest that you record these numbers here:
MODEL
NO.____________________________________
SERIAL
NO.____________________________________
le
INTRODUCTION
PAGE 3
Table of Contents
Introduction
Operation Using
GUI Menu Icons
SafetyPrecautions........................2
General Information about GUI
TableofContents.........................3
Detailed
IMPORTANT SAFETY INSTRUCTIONS
.
.
.
.
.
.
description
icons
menu
of each GUI
icon
menu
.
.
.
.
.
.
.
.
.
.
.
22
23
4-5
Precautions.............................6
Advanced
NotesonDiscs..........................7
Usingatitlemenu/DVDmenu.
IdentificationofControls.................8-11
Changingsubtitlelanguage................25
FrontPanel/Displaywindow.....................8
RearPanel.................................9
RemoteControl.............................10
PreparingtheRemoteControl..................11
OperatingwiththeRemoteControl.
.
.
.
.
.
.
.
.
.
.
.
.
.11
Changing
Operation
audio soundtrack
.
.
.
.
.
.
language.
.
.
.
.
.
.
.
.
.
.
.24
.
26
Viewingfromanotherangle................27
Producinga3DSurroundeffect.
.
.
.
.
.
.
.
.
.
.
.
.27
RepeatPlay............................28
Storing
markers in memory to be
viewed(listenedto)again..................29
Connections
ZoomingFeature/RandomPlay.
ConnectingtoaTV......................12
ConnectingtoanAudioSystem.
Connecting
to
.
Optional Equipment
EnjoyingDolbyDigital(AC-3)Sound.
Enjoying Dolby
Enjoying
Pro
Logic
2 Channel
.
.
.
.
.
.
.
.
.
.
.
.
.
Surround Sound
Digital
Stereo Sound.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.30
ProgramPlay...........................31
.13
.
14-16
Initial SETUP
Operation
.14
Setup.................................32
15
SelectingdiscLanguages.................33
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
16
EnjoyingDTSSound.........................16
Selecting rating
level and
password
.
.
.
.
.
.
34-35
.
SelectingTVAspect......................36
SelectingMenuLanguage.................37
Basic
Operation
SelectingDigitalAudioOutput.
BasicPlayback.......................17-21
Table of
Languages
.
.
.
.
.
.
.
.
.
.
and Their Abbreviations
.38
.
.
.
.
.
.
39
BasicPlayback...........................17-19
Playing
at x2 Normal
Speed
Reference
or
ScanningatHighSpeed.......................20
Disc
PlayingFramebyFrame......................20
BeforeCallingServicePersonnel.
PlayinginSlow-Motion.......................21
Resuming Playback
from the Same Location
.
.
.
.
.
.
.
21
Requirements/Copyright
Information
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
40
.41
Specifications...........................42
PAGE 4
INTRODUCTION
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER'S MANUAL
AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
This set has been
designed and manufactured to assure personal safety. Improper use can result in electric shock or
safeguards incorporated in this unit will protect you if you observe the following procedures for
installation, use and servicing.
This unit is fully transistorized and does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
fire hazard. The
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1.
Read owner's manual
6.
After
unpacking this product, read the owner's
manual carefully, and follow all the operating and
other instructions.
Water and Moisture
Do not
use
near a
bath tub, wash bowl, kitchen sink.
this
tub; in
a
wet
product
near
basement;
water-for
or near a
example,
or laundry
swimming pool
and the like.
2.
Power Sources
This
should be
operated only from the type
on the marking label. If
you are not sure of the type of power supply in your
home, consult your product dealer or local power
company. For products intended to operate from
battery power, or other sources, refer to the
operating instructions.
product
of power
source
7.
Cleaning
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
8.
Power-Cord Protection
indicated
Power-supply cords should be routed so that they
not likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles,
and the point where they exit from the product.
are
3.
Grounding or Polarization
product is equipped with a polarized alternating
current line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet only
one way. This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
This
9.
Do not overload wall outlets, extension cords, or
convenience receptacles as this can result
integral
in
10.
4.
provided for
to ensure reliable operation of the
protect it from overheating. These
openings
ventilation and
in the cabinet
installation such
as a
provided
bookcase
or
or
rack unless proper
the manufacturer's
instructions have been adhered to.
5.
risk of fire
or
electric shock.
Lightning
protection
of this
product during storms,
long
of time,
periods
11.
unplug
it from the wall outlet.
This will
prevent damage
lightning
and
power-line
to the
product
due to
surges.
Object and Liquid Entry
Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result in
a fire or electric shock. Never spill liquid of any kind
on the product.
Heat
The
product
sources
other
heat.
should be situated away from heat
as radiators, heat registers, stoves,
such
products (including amplifiers)
that
produce
12. Attachments
or
or
when it is left unattended and unused for
are
product and to
openings must not be blocked or covered. The
openings should never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in
ventilation is
a
For added
Ventilation
Slots and
Overloading
Do not
use
product
attachments not recommended
manufacturer
as
they
may
cause
by
the
hazards.
INTRODUCTION
PAGE 5
IMPORTANT SAFETY INSTRUCTIONS
13. Accessories
Do not
place
20. Laser Beam
this
product on
an unstable cart, stand, tripod,
bracket, or table. The product
may fall, causing serious
injury to a child or adult, and
serious damage to the
PORTABLE CART WARNING
product. Use only with a cart,
stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the
product. Any mounting of the product should follow
the manufacturer's instructions, and should
mounting accessory recommended by the
manufacturer. A
be moved with
and
product
care.
Do not look into the
lation
21. Disc
Do not
ous
22.
use a
product
e)
power-supply cord or plug is
damaged.
If liquid has been spilled, or objects have fallen
into the product.
If the product has been exposed to rain or water.
If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to its normal operation.
If the product has been dropped or damaged in
f)
any way.
When the
b)
14. Disc
c)
d)
it is
15. Burden
Do not place a heavy object on or step on the
product. The object may fall, causing serious
personal injury and serious damage to the product.
16.
Connecting
When you connect the product to other
turn off the power and unplug all of the
from the wall outlet. Failure to do
so
equipment,
equipment
may
personal injury. Read the
owner's manual of the other equipment carefully and
follow the instructions when making any
23.
17. Sound Volume
Reduce the volume to the minimum level before you
on the product. Otherwise, sudden high volume
24.
turn
hearing
or
Do not allow the
a
longtime.
Replacement parts
replacement parts
speaker damage.
to
distinct
a
need for service.
change
output distorted sound
required, be sure
replacement parts
the manufacturer
characteristics
cause
are
service technician has used
specified by
product
It may
a
in
Servicing
When
18. Sound Distortion
for
product exhibits
performance-this indicates
Do not attempt to service this product yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
connections.
cause
When the
cause an
electric shock and serious
sound may
cracked, deformed,
are
Damage Requiring Service
Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
a)
and
Tray
Keep your fingers well clear of the disc tray as
closing. It may cause serious personal injury.
or repaired disc.
easily broken and may cause seripersonal injury and product malfunction.
use a
These discs
and cart combination should
surfaces may cause the
cart combination to overturn.
opening of the disc tray or ventiproduct to see the source of
may cause sight damage.
of the
the laser beam. It
Quick stops, excessive force,
uneven
opening
as
the
or
have the
original part.
same
Unauthorized
substitutions may result in fire, electric shock,
other hazards.
speaker overheating
the
or
and fire.
25.
19.
Headphones
When you use the headphones,
a moderate level. If you use the
continuously with high
hearing damage.
keep the volume
headphones
volume sound, it may
at
cause
Safety Check
Upon completion of any
product, ask the service
service
checks to determine that the
operating
condition.
repairs to this
perform safety
product is in proper
or
technician to
PAGE 6
INTRODUCTION
Precautions
Notes
Notes
handling
on
When
shipping the DVD player, always use the
original shipping carton and packing materials.
For maximum protection, repack the unit as it was
originally packed at the factory.
Do not use volatile liquids, such as insect spray, near
the DVD player. Do not leave rubber or plastic
products in contact with the DVD player for a long
time. They will leave marks on the finish.
The top and rear panels of the DVD player may
become warm after a long period of use. This is
normal and not
a
When the DVD
remove
Moisture Condensation
on
Moisture condensation
Please read the
damages the
following carefully.
Moisture condensation occurs, for
DVD
is not in use, be
the
same
cal
pick-up
way, moisture may condense on the optilens inside this unit, one of the most cru-
cial internal
parts of the DVD player.
the disc and turn off the power.
use the DVD player for a long
If you do not
Optical
lens
pick-up
to
sure
period,
the
unit may not function properly in the future. Turn
and use the DVD player occasionally.
on
when
example,
you pour a cold drink into a glass on a warm day.
Drops of water form on the outside of the glass. In
malfunction.
player
player.
Moisture condensation
occurs
during
the
following
cases.
Notes
When you
Locating
on
place
When you place this DVD player near a TV, radio, or
VCR, the playback picture may become poor and the
sound may be distorted. In this case, move the DVD
player
away from the TV, radio,
Notes
or
VCR.
bring
a warm
the DVD
player directly
from
a
cold
place.
When you use the DVD player in a room where you
just turned on the heater, or a place where the cold
wind from the air conditioner
directly
hits the unit.
In summer, when you use the DVD player in a hot
and humid place just after you move the unit from
an air conditioned room.
When you
Cleaning
on
to
use
the DVD
player
in
a
humid
place.
It's too
Use
a
soft, dry
cloth for
warm!
cleaning.
For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe
it dry. Do not use any type of solvent, such as thinner
and benzine, as they may damage the surface of the
DVD
Do
player.
If you use a chemical saturated cloth to clean the
unit, follow that product's instructions.
not
damage
Warning: Cleaning
and
adjustment
of
lenses
and/or other
components of playback mechanism
should
performed
be
by
a
qualified
service
To Obtain
a
Clear Picture
two
or
DVD
when
moisture
a situation, it may
parts. Remove the disc,
three hours. After two
or
three hours, the
will have warmed up and evaporated
any moisture. Keep the DVD player connected to
the wall outlet and moisture condensation will
occur.
The DVD
environment. For details, contact your nearest dealer.
player
discs and internal
player
seldom
player is a high technology, precision device. If
the optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality becomes poor. To obtain
a clear picture, we recommend regular inspection and
maintenance (cleaning or parts replacement) every
1,000 hours of use depending on the operating
the
connect the power cord of the DVD player to the wall
outlet, turn on the DVD player and leave it "ON" for
DVD
technician.
use
condensation may occur.
If you use the DVD player in such
Wait!
INTRODUCTION
Notes
on
Discs
This section shows you how to
On
PAGE 7
handle, clean,
and store discs.
On
Discs
Handling
Do not touch the
playback
side of the disc.
Discs
Storing
Do not store discs in
direct
sunlight
place subject
a
or near
Do not store discs in
heat
places subject
moisture and dust such
near a
to
sources.
as a
to
bathroom
or
humidifier.
Store discs
vertically in a case. Stacking
placing objects on discs outside of their
case may cause warping.
Do not attach paper
On
or
tape
to discs.
About This Owner's Manual
Discs
Cleaning
or
Fingerprints and dust on the disc cause
picture and sound deterioration. Wipe the
This owner's
disc from the center outward with
Some DVD video discs have functions that
a
soft
cloth.
Always keep the disc clean.
If you cannot wipe off the dust with a soft
cloth, wipe the disc lightly with a slightly
moistened soft cloth and finish with a dry
cloth.
explains the
player.
basic
may not be
explained
in this owner's manual.
instructions may differ from
this owner's manual, and there may be extra
Therefore,
some
instructions. In this case, follow the instructions
on the TV screen or package.
displayed
Do not
any type of solvents such as
thinner, benzine, commercially available
cleaners or anti-static spray for vinyl LPs.
They
manual
instructions of this DVD
use
may
damage
the disc.
"
during
"
may appear on the TV screen
operation. This icon means the
function
explained
not available
disc.
on
in this owner's
that
specific
manual is
DVD video
PAGE 8
INTRODUCTION
Identification of Controls
Front Panel
POWER/Standby
PAUSE/STEP button
button
MENU button
and indicator
(Power ON mode: Green color
Standby mode: Red color)
Display
SELECT/ENTER button
window
menu
power
open/close
pause/step
menu
search
selec /enter
ARROW
standby
play
Disc
buttons
SKIP/SCAN buttons
tray
PLAY button
OPEN/CLOSE button
Display
skip/scan
stop
STOP button
Window
DVD indicator
Repeat playback
CD indicator
Title number indicator
mode indicators
Random indicator
TITLE PROG.
CHP / TRK
DVD
CD
TOTAL
Total
Chapter/track
number indicator
Angle
Operating
icon indicator
ALL A
B
playing time/elapsed
status indicator
RANDOM
time indicators
INTRODUCTION
PAGE 9
Identification of Controls
Rear Panel
COAXIAL DIGITAL
AUDIO OUT
jack
ANALOG AUDIO
OUT(R/L) jacks 1,
2
AUDIO OUT
1
2
L
R
S-VIDEO
DIGITAL OUT
OUT
VIDEO
OUT
COAXIAL
OPT CAL
S-VIDEO OUT
jack
POWER CORD
Connect to
VIDEO OUT
OPTICAL DIGITAL AUDIO OUT
jack
jack
protection cap from the connector and
connect the optical digital cable (not supplied) firmly so that
the configurations of both the cable and the connector match.
Keep the dust protection cap and always reattach the cap
when not using the connector to protect against dust.
Remove the dust
Dust
protection cap
outlet
only.
an
AC 100-240V, 50/60Hz
PAGE 10
INTRODUCTION
Identification of Controls
(con'd)
REMOTE CONTROL
You will find instructions for each of the remote control functions in the
sections of this
appropriate
instruction manual.
POWER button
OPEN/CLOSE button
REPEAT button
A-B button
POWER
OPEN/CLOSE
SETUP button
RANDOM button
SETUP
REPEAT
A-B
RANDOM
SUBTITLE button
ANGLE button
AUDIO
SUBTITLE
ANGLE
SOUND
AUDIO button
SOUND button
TITLE
MENU
***TITLE button
*MENU button
SELECT/ENTER button
**ARROW buttons
SELECT
/ENTER
DISPLAY button
RETURN button
DISPLAY
RETURN
ZOOM button
MARKER-SEARCH button
ZOOM
MARKER
--
SEARCH
FWD/REV SCAN button
PLAY button
SCAN
PLAY
SKIP
STOP button
FWD/REV SKIP button
STOP
PAUSE/STEP button
RESUME
PAUSE/STEP
SLOW buttons
SLOW
RESUME button
PROGRAM button
123
Number buttons
456
CLEAR button
78
CLEAR
9
PROGRAM
0
*MENU button
Use the MENU button to
menu screen
video discs. To
***TITLE button
Use the TITLE button to
title
screen
discs. To
included
operate
on
display
(page 24).
the
DVD video
a menu
follow the instructions in
Title Menu"
included
screen,
"Using
a
on
operate
display
DVD
a menu
screen, follow the instructions in
"Using
**
a
DVD Menu"
Directional
(page 24).
buttons
in
GUI
screen, TITLE and MENU
arrow
(up, down, left, right) for use
highlighting a selection on a
menu
screen.
the
INTRODUCTION
Identification of Controls
(con'd)
the Remote Control
Preparing
Insert the batteries into the remote control
use
it to
PAGE 11
so
you
Operating
can
with the Remote Control
This section shows you how to
use
the remote control.
operate the DVD player.
Point the remote control at the
the
Open
1
battery
remote
cover.
sensor
and press the
buttons.
menu
power
open/close
pause/step
standby
play
Insert batteries
2
stop
menu
search
select/enter
skip/scan
(AAA size).
30°
30°
Within about 23 ft (about 7 m)
POWER
Make
to match the
sure
the marks inside the
and
-
on
the batteries to
REPEAT
A-B
RANDOM
AUDIO
SUBTITLE
ANGLE
SOUND
TITLE
MENU
battery compartment.
Distance: About 23 ft
Close the
3
+
OPEN/CLOSE
SETUP
cover.
(7 m)
from the front of the remote
sensor
About 30° in each direction of the front of the
Angle:
remote
*
sensor
Do not expose the remote
sensor
of the DVD
player to a strong light source such as direct
sunlight or illumination. If you do so, you may not
be able to operate the DVD player with the remote
control.
Notes
batteries
on
Improper
use
of batteries may
cause
battery leakage
and
corrosion.
To
remote control
correctly,
follow the
Do
Do not insert the batteries into the remote control in the
wrong direction.
Do not charge, heat, open, or short-circuit the batteries.
Do not throw the batteries into fire.
Do not leave dead
or
exhausted batteries in the remote
control.
use
different
types of batteries together,
or
mix
batteries.
new
If you do not
use
time,
remove
the batteries to avoid
from
the remote control for
battery
a long period
possible damage
of
corrosion.
If the remote control does not function
operating
with
range becomes reduced,
correctly or if the
replace all batteries
new ones.
If
battery leakage occurs, wipe the battery liquid
battery compartment, then insert new batteries.
The batteries should last about
use.
the remote control
one
sensor
of the
DVD
instructions below.
Do not
on
Direct the remote control at the remote
operate the
old and
Notes
from the
year with normal
player.
not drop
or
give
the remote control
Do not leave the remote control
near
a
shock.
extremely
hot
humid
Do
place.
not spill water
or
put anything
control.
Do not open the remote control.
wet
on
the remote
or
PAGE 12
CONNECTIONS
Connecting
Connect the DVD
to
TV
a
to your TV
player
AUDIO OUT
1
2
L
R
S-VIDEO
DIGITAL OUT
OUT
VIDEO
OUT
COAXIAL
OPTICAL
To S-VIDEO OUT
(yellow)
(white)
(red)
L
R
To AUDIO OUT
To VIDEO OUT
If the TV has
player
an
with the
S-video
supplied
input,
connect the DVD
S-video cable.
TV
To S-video
S-video cable
Audio video cable
(supplied)
To video
input
or
monitor with
audio video
inputs
input (yellow)
(red)
(supplied)
To audio
inputs
(white)
Notes
Refer to the owner's manual of your TV
as
When you connect the DVD
making any connections.
player
to your
If your television set has
audio
input,
one
well.
TV, be
sure
to turn off the power and
connect the DVD
player
to
a
Y cable
unplug
both units from the wall outlet before
adapter (not supplied)
and then connect to your
TV.
Connect the DVD
player
because DVD video discs
to your TV
are
copy
directly. If
protected.
you connect the DVD
player
to
a
VCR, the playback picture will be distorted
Warning
Do not set the
Digital Audio Output of this DVD player to "Dolby Digital" unless you are connecting the coaxial digital audio jack of
player to an AV decoder that has the Dolby Digital (AC-3) decoding function. High volume sound may damage your hearwell as the speakers. (Refer to "Selecting Digital Audio Output" on page 38.)
this DVD
ing
as
CONNECTIONS
Connecting
You
to
an
Audio
PAGE 13
System
listen to the sound of audio CDs and DVD video discs in stereo.
can
AUDIO OUT
1
2
L
R
S-VIDEO
DIGITAL OUT
OUT
VIDEO
OUT
COAXIAL
OPTICAL
To AUDIO OUT
To S-VIDEO OUT
(white)
(red)
L
R
If the TV has
(yellow)
player
an
with the
S-video
supplied
input,
connect the DVD
S-video cable.
To S-video
S-video cable
(supplied)
To video
input
input (yellow)
To VIDEO
OUT
TV
or
monitor with
audio/video
inputs
To audio
of the
inputs
amplifier
(red)
(white)
Audio
system
Notes
Refer to the owner's manual of your audio system as well.
When you connect the DVD player to other equipment, be sure to turn off the power and
wall outlet before making any connections.
If you
place
the DVD
player
near a
tuner
away from the tuner and radio.
The output sound of the DVD player has
or
unplug
all of the
radio, the radio broadcast sound might be distorted. In this
equipment
case,
move
from the
the DVD
player
ing
level.
a
wide
dynamic range.
Otherwise, the speakers may be damaged by
Turn off the receiver before you connect
speakers may be damaged.
or
a
sudden
disconnect the DVD
Be
sure to adjust the
high volume sound.
player's power cord.
receiver's volume to
a
moderate listen-
If you leave the receiver power on, the
Warning
Do not set the
Digital Audio Output of this DVD player to "Dolby Digital" unless you are connecting the coaxial digital audio jack of
player to an AV decoder that has the Dolby Digital (AC-3) decoding function. High volume sound may damage your hearwell as the speakers. (Refer to "Selecting Digital Audio Output" on page 38.)
this DVD
ing
as
PAGE 14
CONNECTIONS
Connecting
to
Optional Equipment
Enjoying Dolby Digital (AC-3) Sound
You
can
enjoy the high quality dynamic
sound of
Dolby Digital (AC-3), Dolby
Pro
Logic,
and 2 Channel
Digital Stereo.
Dolby Digital (AC-3)
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to
reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this
dynamic realistic sound by connecting the DVD player to a 6 channel amplifier equipped with a Dolby Digital (AC-3)
decoder or Dolby Digital (AC-3) processor.
AUDIO OUT
1
2
L
R
S-VIDEO
DIGITAL OUT
OUT
VIDEO
OUT
COAX
AL
OPTICAL
To DIGITAL OUT
(COAXIAL
or
To S-VIDEO OUT
OPTICAL)
or
VIDEO OUT
S-Video cable
Video cable
75 ohm coaxial cable
or
Amplifier equipped
a Dolby Digital
(AC-3) decoder
To
with
Connection
digital
input
example
audio
To
enjoy Dolby Digital (AC-3)
DVD player
you need the following:
sound from this
To S-video
DVD video discs recorded in
or
Front
Dolby Digital (AC-3)
amplifier equipped
with a Dolby Digital (AC-3)
decoder, or Dolby Digital
(AC-3) processor and power
amplifier
5 speakers and 1 sub woofer
Center
Rear
speaker
(left surround)
enjoy Dolby Digital (AC-3)
the SETUP
Front speaker
(right)
Sub woofer
sound
on
Input
Input
speaker
Rear
*
You need to select
speaker
(left)
6 channel
To
Video
"Dolby Digital"
menu.
speaker
(right surround)
Manufactured under license from Dolby Laboratories Licensing
Corporation. "Dolby", "AC-3" and the double-D symbol are trademarks of
Dolby Laboratories Licensing Corporation.
Confidential
rights
Unpublished
Works.
C
1992-1997
Dolby Laboratories,
Inc. All
reserved.
Notes
Refer to the owner's manual of your audio equipment as well.
When you connect the DVD player to other equipment, be sure to turn off the power and
wall outlet before making any connections.
The
ing
unplug
all of the
output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver's volume
Otherwise, the speakers may be damaged by a sudden high volume sound.
equipment
to
a
from the
moderate listen-
level.
Turn off the
speakers
amplifier before
damaged.
may be
you connect
or
disconnect the DVD
player's
power cord. If you leave the
amplifier
power on, the
CONNECTIONS
Connecting
to
Optional Equipment
Enjoying Dolby
Dolby
Pro
You
can
ing.
If your
PAGE 15
Pro
Logic Surround Sound
Logic Surround
enjoy the excitement of
A/V receiver has a Dolby
still
Surround Sound
Pro
Logic
even if your A/V receiver does not offer Dolby
decoder. Refer to the following connection diagram.
Digital (AC-3)
decod-
AUDIO OUT
1
2
L
R
DIGITAL OUT
S-VIDEO
OUT
VIDEO
OUT
COAXIAL
OPTICAL
To VIDEO OUT
To ANALOG
AUDIO OUT
Video cable
Connection
Audio cable
To audio
example
input
Amplifier equipped
Dolby Pro
Logic Surround
with
To video
Connect
rear
one
or
Center
input
speaker
Front
Front
speaker
(left)
speaker
(right)
TV
two
speakers.
The
output sound from
the
rear
be
monaural
will
speakers
even
you connect two
if
Rear
speaker
(left)
Rear
speaker
(right)
rear
speakers.
With
a
receiver
equipped with Dolby Digital (AC-3)
equipment the same way as described in "Enjoying Dolby Digital (AC-3) Sound" on the previous page.
receiver's owner's manual and set the receiver so you can enjoy Dolby Pro Logic Surround sound.
Connect the
to that
Refer
Warning
Do not set the
Digital Audio Output of this DVD player to "Dolby Digital" unless you are connecting the coaxial digital audio jack of
player to an AV decoder that has the Dolby Digital (AC-3) decoding function. High volume sound may damage your hearwell as the speakers. (Refer to "Selecting Digital Audio Output" on page 38.)
this DVD
ing
as
PAGE 16
CONNECTIONS
Connecting
to
Optional Equipment
2 Channel
Enjoying
Digital Stereo Sound
2 Channel
Digital Stereo
enjoy the dynamic sound of 2 Channel Digital Stereo by connecting
digital audio input and speaker system (right and left front speakers).
You
this DVD
can
Connection
example
To
or
Video
digital
audio
to
receiver
a
Amplifier equipped with
digital audio input
75 ohm coaxial cable
To S-video
player
equipped
with
a
a
input
Input
Input
S-Video cable
To DIGITAL OUT
or
(COAXIAL or
OPTICAL)
Video cable
To S-VIDEO OUT
or
VIDEO OUT
Front
Front
speaker
(left)
speaker
(right)
AUDIO OUT
1
TV
2
L
R
DIGITAL
O
S-VIDEO
T
OUT
VIDEO
OUT
COAXIAL
OPTICAL
Enjoying DTS Sound
DTS
Digital SurroundTM...the finest technology ever invented to transform existing "home theater" systems into six
exceptionally clear, better-than-compact disc, digital audio performance. And DTS Digital Surround is the
only 5.1 surround sound format that can deliver this revolutionary 3-dimensional experience through new music recordings on
compact discs, original 5.1 soundtracks on motion picture laserdiscs, and soon, a wide variety of products on DVD.
Introducing
discrete channels of
Connection
Amplifier equipped
with
a
example
DTS decoder
75 ohm coaxial cable
To
To S-video
or
Video
digital
audio
input
Input
Input
S-Video cable
To DIGITAL OUT
or
(COAXIAl or
OPTICAL)
Front
Video cable
Front
To S-VIDEO OUT
or
speaker
(left)
VIDEO OUT
speaker
(right)
Center
speaker
AUDIO OUT
1
2
L
Sub woofer
R
DIGITAL
Rear
Rear
speaker
(left surround)
S-VIDEO
OUT
OUT
VIDEO
OUT
speaker
(right surround)
COAXIAL
OPTICAL
"DTS" and "DTS
Digital
Out"
are
trademarks of
Digital
Theater
Systems,
Inc.
Notes
Refer to the owner's manual of your receiver as well.
When you connect the DVD player to other equipment, be
wall outlet before making any connections.
The
ing
sure
to turn off the power and
unplug
all of the
output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver's volume
Otherwise, the speakers may be damaged by a sudden high volume sound.
equipment
to
a
from the
moderate listen-
level.
Turn off the receiver before you connect
speakers may be damaged.
or
disconnect the DVD
player's
power cord. If you leave the receiver power on, the
BASIC OPERATION
Basic
PAGE 17
Playback
DIGITAL AUDIO
This section shows you the basics
on
how to
play
back
DVD video disc.
a
Preparations
menu
power
open/close
pause/step
menu
standby
play
stop
When you want to
search
select/enter
select the video
skip/scan
When you want
play back DVD video discs, turn on the TV and
input source connected to the DVD player.
to enjoy the sound of DVD video discs or audio
CDs from the audio
the
3
For
Set
input
turn
system,
the audio
on
system and select
connected to the DVD
player.
connection details, see pages 12 through 16.
the playback picture size according to the aspect
source
ratio of the
connected TV.
POWER
1
If you do not have the necessary equipment to enjoy Dolby Digital
set the Digital Audio Output at the SETUP menu to
(AC-3) sound,
OPEN/CLOSE
SETUP
REPEAT
A-B
RANDOM
AUDIO
SUBTITLE
ANGLE
SOUND
"PCM".
2
Press POWER.
1
The DVD
player
turns
on
and the power indicator goes
on.
TITLE
MENU
Press OPEN/CLOSE.
2
The disc
You
SELECT
/ENTER
DVD
DISPLAY
player
tray by pressing this button
even
if the
is turned off.
RETURN
Place
3
ZOOM
4
tray opens.
open the disc
can
MARKER
SCAN
--
SEARCH
PLAY
If the disc is
placed in upside down (and it is a single sided
display will indicate "NO DISC" or "DISC
the DVD
ERROR".
There
SLOW
two different disc sizes. Place the disc in the
the disc
tray. If the disc is
on
may
tion.
the disc and
guide
damage
Do not
cause
place anything except
the DVD
3" discs
or
out of the
player
5" discs
guide,
it
to malfunc-
on
the disc
tray.
456
78
are
correct
123
CLEAR
the disc tray with the
on
playback
SKIP
STOP
PAUSE/STEP
disc
side down.
disc),
RESUME
a
9
Press PLAY.
4
PROGRAM
The disc
0
tray is automatically closed and playback
begins.
TITLE
CHP / TRK
DVD
playback
If you insert
an
audio
indicator
CD, the CD indicator lights up in the DVD
display.
The title number does not appear.
After playing back all of the chapters in the
automatically stops
TITLE 1
TITLE 3
Example
and returns to the
title, the DVD player
menu screen.
TITLE 2
TITLE 4
of interactive
DVD On-Screen Menu
When
a menu screen
In
of interactive DVDs with
case
the TV
screen.
Perform
step
appears
5
on
control,
on
the TV
screen.
a menu screen
page 18 to start
play.
appears
on
PAGE 18
Basic
BASIC OPERATION
Playback
DIGITAL AUDIO
Press D/E/F/G and press SELECT/ENTER,
press the numeric button(s), to select the
5
or
desired item.
TITLE 2
TITLE 1
1
2
TITLE 3
POWER
34
OPEN/CLOSE
SETUP
REPEAT
A-B
RANDOM
AUDIO
SUBTITLE
ANGLE
SOUND
Play
of the selected item
begins.
now
For further info, also refer to the
TITLE
MENU
/ENTER
DISPLAY
RETURN
ZOOM
MARKER
SCAN
--
you
5
SELECT
After
are
not in
SKIP
Notes
SLOW
move
the DVD
while it is
function.
456
on
Do not
9
the remote control
on
to open and close the disc
123
PROGRAM
player during playback. Doing
so
may
the disc.
Use the OPEN/CLOSE button
player
0
the disc and press
remove
use,
POWER to turn off the power.
Do not
78
of the disc
operation
When the unit is
damage
CLEAR
or case
SEARCH
PLAY
PAUSE/STEP
jacket
playing.
STOP
RESUME
TITLE 4
moving. Doing
push
the disc
up the disc
tray. Doing
so
may
tray
so
cause
or
DVD
push the disc tray
DVD player to mal-
not
the
put any objects other than discs
or
may
tray. Do
cause
the DVD video
player to malfunction.
Keep your fingers well clear of the disc tray as it is closing.
especially careful with children's fingers around the
closing disc tray as there is a risk of personal injury.
"
When"
it
appears on the TV screen while a button is
that this function is not available on the disc
pressed,
you are playing.
Depending on the
or
means
DVD
disc,
restricted. Refer to the
playing.
Be
some
jacket
may be different
of the disc you are
operations
or case
BASIC OPERATION
Basic
PAGE 19
Playback
DIGITAL AUDIO
Stopping Play
Press STOP
during playback.
For your convenience
POWER
stopped, the unit records the point where
pressed (RESUME function). Press RESUME,
and play will resume from this point. When the tray is
opened or PLAY is pressed again, the RESUME function
OPEN/CLOSE
When
play
STOP
was
is
will be cleared.
SETUP
REPEAT
A-B
RANDOM
AUDIO
SUBTITLE
ANGLE
SOUND
TITLE
The RESUME function works
only
elapsed playing time
during playback.
on
/ENTER
DISPLAY
The Resume function may not be available on some DVD discs.
If the player is left in the stop mode for more than 8 minutes, the
RETURN
power shuts off
SCAN
--
PLAY
SKIP
Still Picture
SKIP
STOP
PAUSE/STEP
automatically.
SEARCH
STOP
RESUME
display
Notes
SELECT
MARKER
with discs for which the
the window
This feature will be cleared when the power is turned OFF
and then ON.
MENU
ZOOM
appears
SLOW
Press PAUSE/STEP
(Pause)
during playback.
DVD
PAUSE/
STEP
The
123
The
456
78
CLEAR
9
player
will be
placed
in the still
player
will be
placed
in the pause mode.
picture
mode.
CD
To return to normal
playback, press
PLAY.
PROGRAM
0
Skipping
Skipping
Skipping
or
back
forward
Press SKIP
A
during play.
chapter (DVD) or
button is pressed.
Skipping
Skipping
forward
a
track
(CD)
is
skipped
each time the
back
Press SKIP
during play.
When the button is
pressed once midway through a
chapter/track, the player returns to the start of that
chapter/track. When it is pressed again immediately, a
chapter/track is skipped each time the button is pressed.
PAGE 20
Basic
Playback
Playing
You
can
BASIC OPERATION
play
at x2 Normal
Speed
back discs at various
speeds,
or
and
Scanning
resume
normal
at
High Speed
DIGITAL AUDIO
playback.
To
playback
at 2 times
the normal
POWER
(x2)
speed
OPEN/CLOSE
Press SCAN
SETUP
REPEAT
A-B
RANDOM
AUDIO
SUBTITLE
ANGLE
SOUND
TITLE
button
during playback.
The "SCAN 1" appears on the TV screen.
The playback speed becomes x2 the normal
speed.
Pressing the PLAY button again changes the playback
speed to the normal speed.
The x2 playback does not operate in case of audio CD.
MENU
To Scan at fast forward
SELECT
/ENTER
reverse
DISPLAY
RETURN
ZOOM
MARKER
PLAY
STOP
RESUME
playback.
button
or
SKIP
PLAY
SCAN
fast
SEARCH
--
Hold down the SCAN
SCAN
or
PAUSE/STEP
The
speed of scan is relatively slow at first and becomes
(The speed increases up to 3 steps in case of DVD
disc.)
faster.
SLOW
123
To return to normal
456
78
during
playback.
playback,
release the SCAN
button.
or
9
CLEAR
PROGRAM
0
Note
The DVD
play back sound during the high
playback of DVD video discs.
However, the DVD player plays back sound during fast forward
or fast reverse playback of audio CDs.
speed
Playing
Frame
player
reverse
does not
and forward
Frame
by
You
PLAY
DISPLAY
RETURN
can
advance
a
DVD video disc frame
Press PAUSE/STEP
during
still
by
frame.
playback.
Each time you press the PAUSE/STEP button, the
advances one frame.
ZOOM
MARKER
SCAN
--
PLAY
SKIP
To return to normal
STOP
RESUME
picture
SEARCH
PAUSE/STEP
SLOW
PAUSE/STEP
PLAY.
Notes
The sound is muted
123
playback, press
during
frame
The Frame advance function is
by frame playback.
operated forward only.
BASIC OPERATION
Basic
Playback
Playing
You
can
play
DIGITAL AUDIO
in slow-motion
back
Press SLOW F V
The
PAGE 21
a
DVD video disc in slow-motion.
or
playback speed
Resuming Playback from the same location
VG
during playback.
becomes X1/16 the normal
speed.
You
can
the
same
1
stop playback and
location
on
playback
resume
later from
the disc.
Press STOP at the location where you
want to
interrupt playback.
The DVD
player memorizes the location where you
stopped playback.
The DVD player stores that location in its memory,
unless you turn off the player or open the disc tray.
Opening the disc tray cancels this function.
[TV screen]
-SLOW 1
SLOW 1
2
Each time you press the SLOW F V or V G button, the
playback speed changes as follows.
-SLOW 1
Press RESUME.
The DVD
player
resumes
SLOW 1
STOP
ZOOM
-SLOW 2
playback slightly
stopped playback.
before the location where you
SLOW 2
MARKER
SCAN
--
SEARCH
SKIP
PLAY
STOP
RESUME
-SLOW 3
PAUSE/STEP
SLOW
SLOW 3
123
RESUME
-SLOW 4
SLOW 4
Notes
The Resume function is canceled if the DVD
disconnected from the wall
outlet,
or
player
is
if power is
interrupted.
player resumes playback from the beginning
the stopped chapter or track in case of audio CD.
The DVD
To return to normal
playback, press
PLAY.
Notes
The sound is muted
during
Subtitles do not appear
playback.
on
slow-motion
the
screen
playback.
during slow
motion
The Resume function may not be available
DVD discs.
on some
of
PAGE 22
OPERATION USING GUI MENU ICONS
General Information about GUI
menu
icons
This unit features GUI Menu Icons
showing disc infor(title/chapter/track number, elapsed playing time,
audio/subtitle language, angle, and sound) and player
information (repeat play, play mode, marker, etc.). Some
icons only show the indicated information. Other icons
allow the settings to be changed.
DIGITAL AUDIO
Common
Common
procedures
mation
Press DISPLAY
1
Title function
be accessed from the
stop mode.
Press D/E to select the desired item.
2
The
currently
frame
POWER
can
during playback.
on
selected item is indicated
its GUI
menu
by
a
yellow
icon.
OPEN/CLOSE
SETUP
REPEAT
A-B
RANDOM
AUDIO
SUBTITLE
ANGLE
SOUND
Press F/G to select the desired
3
When numbers
TITLE
numeric buttons
MENU
are
displayed (e.g.
can
setting.
title
No.),
setting
also be used for
the
instead of F/G.
For
DISPLAY
1
functions, the setting will be registered
immediately; for others, SELECT/ENTER must be
2,3
SELECT
/ENTER
some
pressed.
RETURN
Press DISPLAY to clear the GUI Menu Icons.
ZOOM
MARKER
SCAN
--
SEARCH
PLAY
SKIP
STOP
RESUME
Examples of
(The screens
PAUSE/STEP
SLOW
GUI Menu Icons.
may differ
depending
on
the disc
contents.)
TITLE
1
CHAPTER
MARKER
1
1/5
TIME
0:15:45
AUDIO
1 ENGLISH
D 6CH
TRACK
SUBTITLE
TIME
REPEAT
TITLE
1
A-B
15:45
OFF
AB
AUDIO
ANGLE
STEREO
1
REPEAT
SOUND
SOUND
NORMAL
(DVD GUI)
OFF
NORMAL
(CD GUI)
(DVD
and CD
GUI)
OPERATION USING GUI MENU ICONS
Detailed
You
can
description
view information about
Press DISPLAY
of each GUI
a
disc and its
operational
icon
status
during
on
DIGITAL AUDIO
the TV
screen.
FUNCTION
playback.
(Press D/E
DVD GUI
[TV screen]
menu
SELECTION
to select desired
item)
To show the current title No.
TITLE
and to
SELECT/ENTER
To show the current
and to
chapter
to the desired
jump
F/G,
No.
chapter
No.
or
Numeric
SELECT/ENTER
1
SKIP
To show the
TIME
or
Numeric
1
CHAPTER
METHOD
F/G,
to the desired title No.
jump
PAGE 23
and
elapsed
directly select
Numeric
time
by the elapsed time.
scenes
SELECT/ENTER
0:15:45
To show the current audio soundtrack
AUDIO
1 ENGLISH
D 6CH
To show the current subtitles
SUBTITLE
language,
encoding method, channel No.
and to change the settings.
and to
OFF
F/G,
language
SUBTITLE
change the setting.
F/G,
To show the current
ANGLE
and to
F/G,
AUDIO
angle No.
change the angle.
ANGLE
1
To show the current sound
SOUND
and to
NORMAL
Press DISPLAY
during
or
3D
SURROUND)
(Press D/E
CD GUI
SELECTION
to select desired
item)
To show the current track No.
TRACK
and to
jump
F/G,
SOUND
FUNCTION
playback.
[TV screen]
(NORMAL
change the setting.
METHOD
SKIP, F/G,
to the desired track No.
1
To show the
TIME
elapsed
time.
(Display only)
15:45
To show the current audio
AUDIO
(STEREO, LEFT, RIGHT)
and to select to the desired audio channel.
F/G,
AUDIO
STEREO
To show the current sound
SOUND
and to
NORMAL
(NORMAL
change the setting.
Note
Some DVD discs may not
provide
all of the above GUI
menu
icons.
or
3D
SURROUND)
F/G,
SOUND
PAGE 24
Using
Using
a
a
ADVANCED OPERATION
title menu/DVD
menu
title Menu
1
Some movie discs may contain two or more titles.
If the disc has a title menu recorded on it, the
TITLE button
title.
be used to select the movie
can
details of
(The
used.)
Selecting a
Press TITLE.
A list of the titles
operation
differ
depending
on
the disc is
displayed.
TITLE 2
TITLE 1
on
the disc
TITLE 3
title may not be
tain DVD discs.
possible
Pressing
TITLE
1
MENU
/ENTER
DISPLAY
2
SCAN
a
play
2
PAUSE/STEP
TITLE 3
1
structures called
unique
DVD menus. For example, DVDs programmed
with complex contents provide guide menus, and
those recorded with various languages provide
menus for audio and subtitle language. Although
the DVD menu's contents and operation differ
from disc to disc, the following explains the basic
operation when this feature is used.
menu
TITLE 4
Press MENU
The DVD
DISPLAY
starts
playing.
during play.
menu
available
on
the disc is
MENU
2
again
was
first
resumes
play
PLAY
PAUSE/STEP
SKIP
SLOW
123
456
78
CLEAR
9
PROGRAM
0
scene
Press D/E/F/G and press SELECT/ENTER, or
press the numeric button(s), to select desired
item.
STOP
RESUME
from the
pressed.
TITLE 4
SEARCH
displayed.
34
RETURN
--
now
2
when MENU
12
SELECT
/ENTER
now
1
MENU
SCAN
or
TITLE 4
Pressing
TITLE
MARKER
scene
SLOW
DVD Menu
ZOOM
from the
TITLE 2
The selected title
Using
resume
SKIP
PLAY
Some DVDs have
to
pressed.
SEARCH
--
STOP
RESUME
first
Press D/E/F/G and press SELECT/ENTER
PLAY, or press the numeric button(s), to
TITLE 1
MARKER
again
was
select desired title.
RETURN
ZOOM
TITLE
when TITLE
2
SELECT
TITLE 4
on cer-
The selected item is
now
executed.
ADVANCED OPERATION
Changing
subtitle
PAGE 25
language
It is
possible to change the subtitle language to a
language from the one selected at the initial
settings. (See page 33 for further info.)
This operation works only with discs on which multiple
subtitle languages are recorded.
different
Press SUBTITLE
1
When
no
displayed
subtitles
during playback.
recorded, "OFF" will be
are
instead of the
language
number.
SUBTITLE
OFF
Press
2
POWER
OPEN/CLOSE
SETUP
REPEAT
A-B
RANDOM
AUDIO
SUBTITLE
ANGLE
SOUND
repeatedly SUBTITLE until
language is selected.
Number of the
1,2
TITLE
MENU
the
desired
SUBTITLE
subtitle
language
being played back.
ENGLISH
1
SELECT
/ENTER
DISPLAY
RETURN
To eliminate the On Screen Subtitles.
ZOOM
MARKER
SCAN
--
Press SUBTITLE
SEARCH
PLAY
to select OFF at
repeatedly
step
2.
SKIP
STOP
RESUME
PAUSE/STEP
SLOW
123
456
78
CLEAR
9
PROGRAM
0
Notes
In
language is not changed to the
immediately.
When a disc supporting the closed caption is played, the
subtitle and the closed caption may overlap each other on
some
selected
the TV
cases, the subtitle
one
screen.
In this case, turn the subtitle off.
When the desired
pressing
language
the button several
is not selected
times, it
means
even
after
that the lan-
guage is not available on the disc.
When the power is turned on or the disc is removed, subtitles appears in the language selected at the initial set-
tings. If this language is not
priority language appears.
recorded
on
the
disc, the disc's
PAGE 26
ADVANCED OPERATION
Changing
It is
possible
to
different
audio soundtrack
language
change the audio soundtrack language
language from the one selected at the initial settings. (See page 33 for further info.)
This operation works only with discs on which multiple
audio soundtrack languages are recorded.
a
to
DIGITAL AUDIO
?
DVDPress
1
AUDIO
during play.
Number of the
audio soundtrack
language being
played back.
Press AUDIO
2
POWER
1,2
AUDIO1
desired
ENGLISH
D 6CH
repeatedly until
language is selected.
the
OPEN/CLOSE
SETUP
REPEAT
A-B
RANDOM
AUDIO
SUBTITLE
ANGLE
SOUND
TITLE
AUDIO
2 FRENCH
D 2CH
MENU
?
CD
1
Press AUDIO
during play.
SELECT
/ENTER
DISPLAY
AUDIO
RETURN
LEFT
ZOOM
MARKER
SCAN
--
SEARCH
PLAY
SKIP
2
STOP
RESUME
PAUSE/STEP
SLOW
Press AUDIO
repeatedly
until the
desired sound is selected.
123
AUDIO
456
78
CLEAR
STEREO
9
PROGRAM
0
Notes
When the desired
pressing
language
the button several
is not selected
times, it
means
even
after
that the lan-
guage is not available on the disc.
When the power is turned on or the disc is removed, the
language heard is the one selected at the initial settings. If
language is not recorded on the disc, only the available language on the disc will be heard.
this
ADVANCED OPERATION
Viewing
from another
Some DVDs may contain
simultaneously from
shot
For these discs, the
angle
scenes
a
PAGE 27
which have been
number of different
same scene can
angles.
1
Press ANGLE
during playback.
be viewed from
each of these different
(The recorded
used.)
angles using the ANGLE button.
angles differ depending on the disc
ANGLE: 1
ANGLE: 2
ANGLE: 3
ANGLE
Number of
angle
being played back.
2
1
Press ANGLE
repeatedly
desired
is selected.
angle
until the
ANGLE
2
POWER
OPEN/CLOSE
SETUP
REPEAT
A-B
RANDOM
AUDIO
SUBTITLE
ANGLE
SOUND
TITLE
Notes
1,2
MENU
This function
at different
only works
angles.
The ANGLE indicator
recorded at different
SELECT
/ENTER
RETURN
Producing
This unit
a
produce a 3D Surround effect, using
technology, which simulates multichannel audio playback from two conventional stereo
speakers instead of the five or more speakers normally
required to listen to multi-channel audio from a home
Dolby
N-2-2TM
Pro
recorded
up at
lights
to indicate that
angle
scenes
switch-
is
Logic, Dolby Digital (AC-3)
1
Press SOUND
the
during playback.
Each time this button is
screen
pressed,
the TV
display changes:
SOUND
and DTS
NORMAL
multi-channel audio tracks.
2
POWER
the
DIGITAL AUDIO
theater. This feature works with DVD discs encoded
with
the unit
angles
scenes
3D SURROUND effect
can
SpatializerTM
on
having
possible.
The angle number can be programmed beforehand;
angle will be switched to the selected number when
ANGLE indicator lights up.
ing
DISPLAY
for discs
Press SOUND
repeatedly
until the
desired sound is selected.
OPEN/CLOSE
SOUND
SETUP
REPEAT
A-B
RANDOM
AUDIO
SUBTITLE
ANGLE
SOUND
TITLE
MENU
3D SURROUND
1,2
Notes
This 3D Surround effect may not be available on some
DVD discs, such as those recorded with a mono audio
soundtrack.
SELECT
/ENTER
Turn off the TV surround sound and other surround
effects when
DISPLAY
RETURN
using
this 3D surround effect.
For best 3D Surround effect
using only two speakers it
speakers be positioned
to 8' apart, and the listening position
away from the speakers.
recommended that the two
approximately
6'
should be 6' to 8'
is
PAGE 28
ADVANCED OPERATION
Repeat Play
DIGITAL AUDIO
Repeating sections between
specific points (A-B repeat)
Repeating viewing (listening)
Press REPEAT
during playback.
Each time this button is
pressed, the TV screen
changes as shown below and the disc will repeat
chapter or title (DVD) or a track (CD).
?
a
1
Press A-B
during play
repeat play is
to start
two
at the
point
where
(A).
A-B
DVD
A*
Repeat of
chapter being
played
REPEAT
2
CHAPTER
Repeat of title
being played
Press A-B
during play
repeat play is
at the
point where
(B).
to be concluded
REPEAT
TITLE
A-B
AB
REPEAT
Cancel
repeat mode
OFF
(normal play)
Repeat play
of the selection between
points
A
and B starts.
To return to normal
?CD
Press A-B
once
play
"OFF" is
displayed.
REPEAT
Repeat of track
being played
OFF
REPEAT
TRACK
REPEAT
Repeat
of entire
ALL
disc contents
REPEAT
Cancel
repeat
OFF
mode
(normal play)
To return to normal
play
Press REPEAT several times until "OFF" is
displayed.
Notes
Repeat play works only with discs for which the elapsed
playing time appears in the DVD display window during
playback.
Repeat play may not work correctly with some DVDs.
A-B repeat play works only within a title DVD or a track
CD.
A-B
repeat play works only with
elapsed playing time appears in
window during playback.
discs for which the
Some subtitles recorded around
point
appear
(DVD).
the DVD
A
display
or
B may fail to
ADVANCED OPERATION
Storing
markers in memory to be viewed
Storing a MARKER in the
marking your page in a
quickly return to any point
DVD memory is similar
book. It allows you to
to
the disc.
on
PAGE 29
(listened to) again
Storing
Storing
a
a
marker in
in the
the memory
Press MARKER
be viewed
during play at the starting point
(listened to) again.
to
MARKER
1/5
Indicates "1/5" is stored in the memory.
to 5 markers can be stored in the memory.
Up
Recalling/Clearing
POWER
SETUP
REPEAT
A-B
RANDOM
AUDIO
SUBTITLE
ANGLE
SOUND
TITLE
Press SEARCH
1
OPEN/CLOSE
a
a
marker
during playback.
MARKER
MARKER
MARKER
PICTURE 1
PICTURE 2
PICTURE 3
MARKER
MARKER
PRESENT
PICTURE 4
PICTURE 5
PICTURE
MENU
SELECT
/ENTER
SELECT/
ENTER
DISPLAY
Press D/E/F/G to select the marker to be
2
RETURN
recalled/cleared.
ZOOM
MARKER
--
SEARCH
MARKER
SEARCH
SCAN
PLAY
SKIP
PLAY
STOP
RESUME
PAUSE/STEP
Press PLAY
3
marker.
or
or
SELECT/ENTER to recall
Press CLEAR to clear
a
a
marker.
SLOW
Play
resumes
from the
selected marker,
point corresponding
to the
the selected marker is cleared.
or
123
The "PRESENT PICTURE" is not cleared.
456
78
CLEAR
CLEAR
9
PROGRAM
0
Notes
These
operations
work
only
with discs for which the
elapsed play-
time appears in the DVD display window during playback.
Some subtitles recorded around the marker may fail to appear
ing
(DVD).
All the markers
is removed.
are
cleared when the power is turned off
or
the disc
PAGE 30
Zooming
ADVANCED OPERATION
feature/Random
play
DIGITAL AUDIO
The Zoom feature allows you to "ZOOM-IN" and
enlarge the picture on the screen to either 4 times
16 times
or
1
(X16)
during
playback.
The DVD
ter of the
function
play
only
works with DVD video
karaoke discs and with audio CD discs. Random does
not work with DVD movies.
its normal size.
Press ZOOM
still
Note: Random
(X4)
normal
playback
or
You
playback titles, chapters within a title, or tracks
(Random playback)
The DVD player automatically selects the titles in a
DVD video karaoke disc only and plays them back
randomly.
can
in random order.
player magnifies
picture.
the
image
in the
cen-
Each press of the ZOOM button changes the TV
in the following sequence.
screen
TITLE
:
2
X4
TITLE : 1
TITLE : 3
(X4)
Random
play (DVD)
X16
1
(X16)
Press RANDOM
The DVD
player
during stop.
starts random
playback.
If you press the RANDOM button during normal
the DVD player will randomly select
playback,
another title and
begin
random
playback
immedi-
ately.
2
(Normal)
The
magnification
right corner
upper
level will be
of the
displayed
Random
The
(D/E,
1
2
3
Press SELECT/ENTER.
The selected frame is
on
the TV
To
resume
normal
resume
again
normal
in full size
playback
respond
or
still
play-
DVD video discs.
2
To
screen
appears
on
the TV
begins
random
playback.
normal
playback
during random playback.
The RANDOM indicator in the DVD display
window disappears.
resume
Press RANDOM
to Zoom feature.
Notes
Random
on
during stop.
playback
to cancel Zoom feature
scenes, the buttons may not work in the
Zoom does not work
Press RANDOM
The random
another track and
playback
Notes
During some
right column.
the tracks in the disc in random order.
If you press the RANDOM button during normal
playback, the DVD player immediately selects
back.
Some discs may not
play (CD)
player plays
screen.
screen.
Press ZOOM
and
displayed
normal
playback
during random playback.
The RANDOM indicator in the DVD display
window disappears.
resume
Press RANDOM
in the
zoom area.
If you press the ARROW buttons
F/G), the zoom point shifts.
To
subtitles
or menus
included
on
playback
may not be
possible
on
certain discs.
If you press the SKIP
button
back, the DVD player goes
to another track
starts
playback.
during
random
play-
randomly
and
ADVANCED OPERATION
PAGE 31
Program play
Note:
Program play
DIGITAL AUDIO
function is
possible only
with audio CDs. It does not work with DVD
The
you
the tracks in the disc in
player plays
specify.
order
an
movie discs.
Press PROGRAM
1
during playback
or
stop
mode.
The program
playback
screen
appears
on
the TV
screen.
Program
POWER
Step
1
Total Time
000
OPEN/CLOSE
Clear All
SETUP
REPEAT
A-B
RANDOM
AUDIO
SUBTITLE
ANGLE
SOUND
?
TITLE
To exit the screen, press PLAY,PROGRAM
SELECT/ENTER.
Press D/E/F/G and press the numeric
to select the desired track number.
2
MENU
or
button(s),
2,3
Program
SELECT
/ENTER
11
5
9
DISPLAY
Step
3
Total Time
832
RETURN
ZOOM
MARKER
SCAN
--
SEARCH
PLAY
3
SKIP
Clear All
STOP
RESUME
PAUSE/STEP
SLOW
?
?
123
456
78
CLEAR
Repeat step 2 to select another track.
Up to 20 tracks can be programmed.
Press PLAY
3
or
SELECT/ENTER to exit the
screen.
9
The selected track is stored in the memory and
now begins in the programmed sequence.
PROGRAM
0
play
If you press PROGRAM to exit the screen, the
selected tracks
After
Play
are
not memorized.
playback
is
stopped.
the program
To clear the program
Clearing
1
one
by
one
Press D/E/F/G to select the unwanted No. and then press
CLEAR.
To clear all the programs
Press D/E/F/G to select the "Clear All" and press
or SELECT/ENTER to exit the
SELECT/ENTER. Press PLAY
If you press PROGRAM to exit the screen, the programs are not cleared. (The programs are also cleared when
the power is turned off or the disc is removed.)
screen.
PAGE 32
INITIAL SETUP OPERATION
SETUP
Once the initial
settings have been completed,
always be operated under the
same conditions (especially with DVD discs).
The settings will be retained in the memory until
they are changed, even if the power is switched
the
player
Common
Common
of
of initial
procedures
settings
can
1
Press SETUP in the stop mode.
The SETUP
menu
is
displayed.
off.
Disc Audio
English
Original
Disc Subtitle
English
English
English
Disc Menu
Rating
Password
8----
TV
16:9 Wide
Italy
English
Other----
Digital
DOLBY
DIGITAL
Aspect
Menu Language
Audio
POWER
1
REPEAT
AUDIO
A-B
SUBTITLE
Press D/E to select the desired item.
The
ANGLE
Disc Audio
Disc Subtitle
?
Disc Menu
?
?
?
?
SELECT
/ENTER
DISPLAY
RETURN
3
SCAN
SEARCH
PLAY
SKIP
SLOW
456
78
9
PROGRAM
require
respective page.)
setting
Settings display.
0
33)
To clear the initial
D/E/F/G
SELECT/ENTER.
additional
steps. (See the
is selected the
screen
returns to
menu
Press SETUP, RETURN
is displayed.)
Press
page
and press SELECT/ENTER.
Some items
To exit SETUP
123
CLEAR
the
Rating (see page 34)
Password (see page 35)
TV Aspect (see page 36)
Menu Language (see page 37)
Digital Audio Output (see page 38)
setting
the Initial
PAUSE/STEP
(see
When the alternate
STOP
RESUME
setting for
setting(s).
Press G and then D/E to select the desired
?
MARKER
will show the current
?
?
ZOOM
screen
?
SOUND
MENU
--
Play
RANDOM
TITLE
2,3
Spanish
/PCM
selected item, and the alternate
OPEN/CLOSE
SETUP
Output
Resume
Return
2
French
German
or
RESUME.
settings
(The previous
screen
screen
to select RESUME and press
(Pressing SETUP, RETURN
settings screen.)
also clears the initial
or
RESUME
INITIAL SETUP OPERATION
Selecting
disc
PAGE 33
language (DVD only)
This is to select the audio soundtrack
At the setup
subtitle
Press D/E to select "Disc Audio" and press
language,
language used in title
menus or DVD menus which will always be used
for every disc to be played back.
language
and the
1
screen
G.
When you
play back a DVD video disc, the DVD
player automatically displays the pre-selected
subtitle language if it is included on the disc.
Disc Audio
English
Original
Disc Subtitle
English
English
English
Disc Menu
Rating
Password
8----
TV
16:9 Wide
Italy
English
Other----
Aspect
Menu Language
Digital
Audio
OPEN/CLOSE
SETUP
REPEAT
A-B
RANDOM
AUDIO
SUBTITLE
ANGLE
SOUND
TITLE
MENU
Spanish
/PCM
Play
Press D/E to select the desired
2
language
and
then press SELECT/ENTER.
Original
English
Other
:The
:
:
original language of each disc will be selected.
English will be Selected.
Another language can be selected. You can input
4-digit language code. (Refer to the language
The
codes
on
language
1,2
DOLBY
DIGITAL
Output
Resume
Return
POWER
French
German
page 39. Press CLEAR if
code is entered.)
an
incorrect
SELECT
/ENTER
The Disc Subtitle and Disc Menus
DISPLAY
RETURN
ZOOM
MARKER
SCAN
--
The
SEARCH
PLAY
SKIP
are
selected
by
the
same
method.
screen
illustrated in
step
1 is
displayed.
Press
D/E/F/G
to select RESUME and press SELECT/ENTER to return to
the initial
settings
screen.
STOP
RESUME
PAUSE/STEP
SLOW
Note
123
456
78
CLEAR
9
PROGRAM
0
If the language selected is not available on the disc,
language designated by each disc will be selected.
the
original
PAGE 34
INITIAL SETUP OPERATION
level and
Selecting rating
Selecting rating
(DVD only)
This is to
prohibit
DVDs which
are
level and
the
password
of
playing
password (DVD only)
Selecting
Selecting rating
At the SETUP
specified
unsuitable for children.
Some DVD discs contain
restriction level
a
level
1
(DVD
(DVD only)
only)
screen
Press D/E to select
Rating
and press G.
which enables
parents to remove scenes or
prevent playback of discs by children. DVD
players are equipped with a password
designed to prevent children changing
the
level.
Disc Audio
English
Disc Subtitle
Disc Menu
English
English
Rating
8
Password
TV
Aspect
Menu Language
Digital
8
7
----
Audio
Output
16:9 Wide
6
English
5
DOLBY
DIGITAL
4
/PCM
3
2
Resume
Return
2
POWER
Play
1
Press D/E to select the desired level and
press SELECT/ENTER.
OPEN/CLOSE
SETUP
REPEAT
AUDIO
A-B
SUBTITLE
RANDOM
ANGLE
Disc Audio
English
Disc Subtitle
English
English
Disc Menu
SOUND
6
Rating
Password
TITLE
8 Blocked
----
7 Blocked
MENU
TV
Aspect
Menu Language
Digital
Audio
Output
16:9 Wide
6
English
5
DOLBY
DIGITAL
4
/PCM
3
1,2
SELECT
/ENTER
2
Return
DISPLAY
Resume
Play
1
RETURN
ZOOM
MARKER
SCAN
--
SEARCH
PLAY
SKIP
STOP
RESUME
PAUSE/STEP
SLOW
123
You cannot
play
DVD video discs rated
78
CLEAR
9
PROGRAM
0
than the level
If you change the level and enter a password, playback of all
DVDs with ratings higher than your selection will be blocked,
unless the correct
456
higher
you selected unless you cancel the parental lock function.
For example, when you select level 7, discs rated higher than
level 7 are blocked and cannot be played.
you
with
password is entered again. For example: if
change the level to "5", the DVD player will not play discs
ratings of "6", "7" or "8" unless the correct password is
entered
on
the remote control.
INITIAL SETUP OPERATION
level and
Selecting rating
PAGE 35
password
Setting
Setting
your
your
password (DVD
(DVD only)
only)
If you
change the rating level to "7" or lower, you
a 4-digit "password" to prevent playback of discs
ratings.
POWER
At the SETUP
OPEN/CLOSE
SETUP
REPEAT
A-B
RANDOM
AUDIO
SUBTITLE
ANGLE
SOUND
TITLE
1
screen
Disc Audio
English
Disc Subtitle
English
English
Disc Menu
Rating
SELECT
/ENTER
DISPLAY
higher
Press E to select password.
Press G and then D/E to select the "Change" item.
MENU
1,2,5
must enter
with
Password
8----
Change
TV
Aspect
Menu Language
16:9 Wide
Clear
Digital Audio Output
DOLBY
DIGITAL
English
/PCM
RETURN
ZOOM
MARKER
SCAN
--
SEARCH
Resume
Return
Play
SKIP
PLAY
STOP
RESUME
PAUSE/STEP
2
SLOW
Press SELECT/ENTER.
123
Disc Audio
English
Disc Subtitle
English
English
Disc Menu
3,4
456
-
Password
78
CLEAR
9
PROGRAM
4-digit password
If you forget your password, to clear the
current password, follow the procedure
below.
screen
1
Press E to select "Password" item.
2
Enter 6-digit number "210499" and
then press SELECT/ENTER.
Change
Digital Audio Output
DOLBY
DIGITAL
Resume
/PCM
Play
Input a 4-digit password.
Example : 1234
Do not forget your password.
4
Input
5
Press SELECT/ENTER.
the
4-digit password
Enter
a new
Refer to
the
right.
is cleared.
4-digit password again
is finished and the SETUP
When the selected
password
is
your
password"
than the
To
section
on
to
screen
is
verify.
displayed.
already set, "Set"
"-"
appears. When it is not set,
appears
The rating is locked. Any discs whose rating is
correct
password
"Setting
Clear
English
-
The
-
3
Setting
At the SETUP
-
16:9 Wide
Return
To clear your
-
Aspect
Menu Language
TV
0
3
New
Rating
-
setting cannot be played
password is entered.
higher
back unless the
change the settings
change the rating level/password, enter your 4-digit
password and follow the steps on page 34-35 again.
To
PAGE 36
INITIAL SETUP OPERATION
Selectings
Selecting
Select the
TV
TV
Aspect
At the SETUP
Aspect
appropriate
type according
screen
your TV set; conventional size
wide-screen (16:9).
screen
(4:3)
to
1
or
screen.
Press D/E to select TV
Disc Audio
English
Disc Subtitle
English
English
Disc Menu
POWER
Rating
OPEN/CLOSE
SETUP
REPEAT
AUDIO
A-B
SUBTITLE
ANGLE
8---16:9 Wide
4:3 Letterbox
English
4:3 Panscan
DOLBY
DIGITAL
16:9 Wide
Digital
SOUND
TITLE
Password
TV
Aspect
Menu Language
RANDOM
and press G.
Aspect
Audio
Output
/PCM
MENU
Resume
Return
1,2
Play
SELECT
/ENTER
2
DISPLAY
RETURN
ZOOM
MARKER
SCAN
--
press D/E to select the desired
press SELECT/ENTER.
PLAY
Disc Audio
English
Disc Subtitle
Disc Menu
English
English
Rating
8
SKIP
Password
PAUSE/STEP
and
SEARCH
STOP
RESUME
Aspect
----
SLOW
TV
Aspect
Menu Language
Digital
Audio
Output
16:9 Wide
4:3 Letterbox
English
4:3 Panscan
DOLBY
DIGITAL
16:9 Wide
/PCM
123
456
78
CLEAR
Resume
Return
Play
9
PROGRAM
0
4:3 Letterbox
& Scan
The video material not formatted in the Pan
:
is
style
played
bands appear at
4:3 Panscan
:
back in the letterbox
style (black
top and bottom of screen).
Select when
a
conventional TV set is
connected. The video material formatted in the Pan & Scan
style is played
cut off).
16:9 Wide
connected.
:
back in that
Select when
Played
a
left and
right edges
are
wide-screen TV set is
in "FULL" size.
TV to "FULL" mode is also
4:3 Letterbox
style (the
(Setting
necessary.)
the wide-screen
Cut Off
*
Each
for
a
screen
shows
wide-screen is
example
played.
an
when the video material
(This setting
does not affect the video material for
conventional
size.)
4:3 Panscan
Setting
16:9 Wide
is finished and the SETUP
screen
is
displayed.
INITIAL SETUP OPERATION
Selecting
Menu
PAGE 37
Language
At the SETUP
1
screen.
Press D/E to select Menu
Language
and
press G.
Disc Audio
English
Disc Subtitle
English
English
Disc Menu
Rating
POWER
Password
8----
TV
Aspect
Menu Language
16:9 Wide
Digital Audio Output
DOLBY
DIGITAL
English
/PCM
English
Spanish
OPEN/CLOSE
SETUP
REPEAT
A-B
RANDOM
AUDIO
SUBTITLE
ANGLE
SOUND
TITLE
MENU
Return
2
Play
Press D/E to select the desired Menu
Language
1,2
Resume
and press SELECT/ENTER.
SELECT
/ENTER
DISPLAY
RETURN
Disc Audio
English
Disc Subtitle
English
English
Disc Menu
Rating
ZOOM
MARKER
SCAN
--
SEARCH
PLAY
SKIP
STOP
RESUME
PAUSE/STEP
Password
8----
TV
Aspect
Menu Language
16:9 Wide
Digital Audio Output
DOLBY
DIGITAL
123
456
78
9
PROGRAM
0
/PCM
SLOW
Return
CLEAR
English
Resume
Play
English
Spanish
PAGE 38
INITIAL SETUP OPERATION
Audio
Selecting Digital
Selecting Digital
Audio
Each DVD disc has
a
Output
options. Set the
according to the type
At the SETUP screen.
Press D/E to select Digital Audio
press G.
Output
variety of audio output
player's Digital Audio Output
of audio
system you
POWER
1
Disc Audio
English
Disc Subtitle
English
English
Disc Menu
Rating
REPEAT
AUDIO
A-B
SUBTITLE
RANDOM
ANGLE
SOUND
TITLE
and
use.
OPEN/CLOSE
SETUP
Output
Password
8----
TV
Aspect
Menu Language
16:9 Wide
Digital Audio Output
DOLBY
DIGITAL
English
DOLBY
DIGITAL
/PCM
/PCM
Stream/PCM
MENU
PCM
Resume
Return
1,2
Play
SELECT
/ENTER
Press D/E to select the desired output and
press SELECT/ENTER.
2
DISPLAY
RETURN
ZOOM
MARKER
SCAN
--
SEARCH
SKIP
PLAY
Disc Audio
English
Disc Subtitle
English
English
Disc Menu
STOP
RESUME
Rating
PAUSE/STEP
Password
8----
TV
16:9 Wide
SLOW
Aspect
Menu Language
Digital
Audio
English
DOLBY
DIGITAL
Output
DOLBY
DIGITAL
/PCM
123
/PCM
Stream/PCM
PCM
456
78
CLEAR
Resume
Return
Play
9
PROGRAM
0
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM" if
digital output is supplied to Dolby Digital decoder,
(or
amplifier or other equipment with Dolby Digital
decoder).
an
active
an
Stream/PCM: Select "Stream/PCM" if
is
to
active
an
other
digital output supplied
amplifier
equipment with DTS decoder, Dolby Digital
an
or
decoder and
MPEG decoder.
PCM: Select "PCM" if
to
OUTPUT
Playback
Disc
96 kHz
Stream/PCM
Dolby Digital/
PCM
only
an
amplifier
recorder
or
or
active
digital output is
equipment with
deck).
linear PCM
audio
output, don't
other
DAT
PCM
PCM
PCM
PCM
Notes
Linear PCM
DVD
DTS DVD
supplied
only (or MD
an
DTS bit Stream
Not
Output
Dolby Digital
Dolby Digital
Dolby Digital
DVD
bit Stream
bit Stream
Not
Output
PCM
When you are not using the
select any of the options.
If
digital audio output signal is supplied to an receiver
equipment without a corresponding digital decoding
capability, a very loud noise may be produced which could permanently damage the speakers.
The DTS DVD disc sound is played back only when the DVD
player is connected with amplifier with a DTS decoder.
an
or
MPEG DVD
MPEG bit Stream
PCM
PCM
Audio CD
PCM
PCM
PCM
DTS Audio CD
DTS bit Stream
DTS bit Stream
DTS bit Stream
active
player's digital
other
INITIAL SETUP OPERATION
Table of
Enter the
Languages
appropriate
Code
and Their Abbreviations
code number for the initial
Language
PAGE 39
Code
settings "Audio",
Language
"Subtitle" and/or "Menu"
Code
6565
Afar
7079
Faroese
7678
6566
Abkhazian
7082
French
7679
6570
Afrikaans
7089
Frisian
6577
Ameharic
7165
6582
Arabic
6583
Language
(See
page
33).
Code
Language
Lingala
8375
Slovak
Laothian
8376
Slovenian
7684
Lithuanian
8377
Samoan
Irish
7686
Latvian, Lettish
8378
Shona
7168
Scots Gaelic
7771
Malagasy
8379
Somali
Assamese
7176
Galician
7773
Maori
8381
Albanian
6588
Aymara
7178
Guarani
7775
Macedonian
8382
Serbian
6590
Azerbaijani
7185
Gujarati
7776
Malayalam
8385
Sundanese
6665
Bashkir
7265
Hausa
7778
Mongolian
8386
Swedish
6669
Byelorussian
7273
Hindi
7779
Moldavian
8387
Swahili
6671
Bulgarian
7282
Croatian
7782
Marathi
8465
Tamil
6672
Bihari
7285
Hungarian
7783
Malay
8469
Telugu
6678
Bengali; Bangla
7289
Armenian
7784
Maltese
8471
Tajik
6679
Tibetan
7365
Interlingua
7789
Burmese
8472
Thai
6682
Breton
7378
Indonesian
7865
Nauru
8473
Tigrinya
6765
Catalan
7383
Icelandic
7869
Nepali
8475
Turkmen
6779
Corsican
7384
Italian
7876
Dutch
8476
Tagalog
6783
Czech
7387
Hebrew
7879
Norwegian
8479
Tonga
6789
Welsh
7465
Japanese
7982
Oriya
8482
Turkish
6865
Danish
7473
Yiddish
8065
Panjabi
8484
Tatar
6869
German
7487
Javanese
8076
Polish
8487
Twi
6890
Bhutani
7565
Georgian
8083
Pashto, Pushto
8575
Ukrainian
6976
Greek
7575
Kazakh
8084
Portuguese
8582
Urdu
6978
English
7576
Greenlandic
8185
Quechua
8590
Uzbek
6979
Esperanto
7577
Cambodian
8277
Rhaeto-Romance
8673
Vietnamese
6983
Spanish
7578
Kannada
8279
Rumanian
8679
Volapuk
6984
Estonian
7579
Korean
8285
Russian
8779
Wolof
6985
Basque
7583
Kashmiri
8365
Sanskrit
8872
Xhosa
7065
Persian
7585
Kurdish
8368
Sindhi
8979
Yoruba
7073
Finnish
7589
Kirghiz
8372
Serbo-Croatian
9072
Chinese
7074
Fiji
7665
Latin
8373
Singhalese
9085
Zulu
PAGE 40
Disc
REFERENCE
Requirements/Copyright
Discs
Playable
This DVD
Information
player
can
play
back the
following
Disc mark
discs.
Disc size
Contents
12
playback
Approx.
4 hours
Approx.
8 hours
Approx.
80 minutes
Approx.
160 minutes
(single
time
sided
disc)
cm
Audio+Video
DVD video discs
Maximum
(moving pictures)
(double
sided
(single
disc)
sided
disc)
8cm
12
(double
sided
disc)
74 minutes
cm
Audio
Audio CDs
DIGITAL AUDIO
20 minutes
8cm
You cannot
CD-i discs
This DVD
playback
discs other than those listed above.
not be
can
player
uses
played
on
this DVD
the NTSC color
(Video CD, CD-ROM, CD-Extra, CD-G, photo CD,
and
player.)
system, and
cannot
play
back DVD video discs recorded in any other color
system (PAL, SECAM, etc.)
"Certain audio features of this
3-D Stereo,
Spatializer
product manufactured under a license from Desper Products, Inc.,
Spatializer N-2-2 (TM) and the circle-in-square device are trademarks owned by Desper
Products, Inc,."
Region Management
Information
Region Management Information: This DVD/CD Player is designed and manufactured to respond to the Region
Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does
not correspond to the Region number of this DVD/CD player, this DVD/CD player cannot play that disc.
The
Region
Notes
number of this DVD/CD
on
player
is 4.
4
Unauthorized Discs
You may not be able to play back some DVD video discs
geographic area or made for business purposes.
on
When you
Regional
Notes
try
on
to
play
an
unauthorized disc, "Check
player
if
they
purchased
were
Code" appears
on
the TV
from outside your
screen.
Copyright
It is forbidden
without
back
this
by law
permission.
DVD video discs
to copy,
broadcast, show, broadcast
on
cable, play in public, and
rent
copyrighted
material
protected, and any recordings made from these discs will be distorted.
product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
This
are
copy
REFERENCE
Before
Calling
Service Personnel
and Correction
Symptoms
Check the
following guide
for the
possible
cause
of
a
problem
before
contacting
service.
Cause
Symptom
Correction
No power.
?
The power cord is disconnected.
?
The power is on, but
the DVD player does
?
No disc is inserted.
?
the power cord into the wall outlet
Plug
securely.
Insert
disc.
a
(Check
that the DVD or,
audio CD indicator in the DVD
not work.
No
PAGE 41
display
is
lit.)
picture.
?
The TV is not set to receive DVD
signal
?
output.
Select the
on
the TV
player
?
The video cable is not connected
?
securely.
No sound.
appropriate video input mode
the picture from the DVD
so
The connected TV power is turned off.
?
Turn
?
The
?
Select the correct
equipment
connected with the
audio cable is not set to receive DVD
The audio cables
not connected
are
?
securely.
?
on
jacks
the TV.
input mode of the
you can listen to the
sound from the DVD player.
audio receiver
signal output.
?
screen.
securely.
?
?
the TV
on
appears
Connect the video cable into the
so
Connect the audio cable into the
jacks
securely.
The power of the equipment connected
with the audio cable is turned off.
?
The
?
Digital Audio Output
wrong position.
is set to the
Turn
on
the
equipment
connected with
the audio cable.
Set the AUDIO SELECTOR to the
position, then turn on
player again by pressing the
correct
the DVD
POWER
button.
The
playback picture
The DVD
not start
The disc is
is poor.
player does
playback.
?
Clean the disc.
dirty.
No disc is inserted.
?
Insert
disc.(Check
a
that the DVD,
audio CD indicator in the DVD
or
display
is
lit.)
?
An
unplayable
disc is inserted.
?
Insert
playable
a
disc.
(Check
the disc
type, color system and Regional code.)
?
The disc is
down.
placed upside
?
Place the disc with the
playback
side
down.
?
The disc is not
placed
within the
guide.
?
Place the disc
inside the
?
The disc is
?
A
is
menu
dirty.
on
the TV
?
?
screen.
on
the disc
tray correctly
guide.
Clean the disc.
Press the SETUP button to turn off the
menu screen.
?
The
level is set.
Rating
?
Cancel the
the
The remote control
does not work
?
The remote control is not
remote
properly.
?
pointed
player.
at the
?
of the DVD
?
player.
There is
an
obstacle in the
path of the
player.
Rating
function
or
change
level.
Point the remote control at the remote
sensor
The remote control is too far from the
DVD
?
sensor
rating
of the DVD
Operate the
23ft(7m).
player.
remote control within about
?
Remove the obstacle.
?
Replace
remote control and the DVD
?
The batteries in the remote control
exhausted.
are
the batteries with
new ones.
PAGE 42
REFERENCE
Specifications
DVD
Power
supply
AC 100-240V, 50/60 Hz
Power
consumption
20W
Mass
7.7 lbs
External dimensions
[DVplayer]
(W
X H X
D)
(3.5 kg)
17" X 3.2" X 11.8"
(430
Signal system
NTSC
Laser
Semiconductor laser,
Frequency
range
Signal-to-noise
ratio
Audio
range
dynamic
(digital audio)
(digital audio)
(digital audio)
Wow and flutter
Operating
Video
80
x
298
wavelength
More than 105 dB
650
More than 95 dB
conditions
0.003 %
Temperature:
1.0 V
output
(p-p),
(Y)
1.0 V
(C)
0.286 V
(less
41°F to 95°F,
75 Ω,
(p-p),
negative
75 Ω,
than
sync., RCA
negative
output (digital audio)
0.5V(p-p),75Ω,RCAjackx1
Audio
output (optical audio)
Optical
Audio
output (analog audio)
2.0
Vrms(1 KHz,
Designs
x
0
dB),
330 Ω, RCA
Remote control...........................................................................................1
..........................................................................................2
specifications
P/NO: 3834RS0007A
are
subject
to
change
status: Horizontal
jack
x
1
4-pin
1
Audio/video cable.......................................................................................1
and
(W.PEAK)) (EIAJ)
sync., Mini DIN
Coaxial audio cable....................................................................................1
(AAA)
0.001 %
75 Ω,
(p-p),
connector
+
Operation
Audio
Batteries
nm
(EIAJ)
S-video cable .............................................................................................1
[Suplied Acesori ]
mm)
(EIAJ)
Below measurable level
output
S-video
x
2Hzto44kHz
(digital audio)
Harmonic distortion
[Outp s]
Accessories
player/Outputs/Supplied
without notice.
jack (L, R)
x
2
x
1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement