LG CK57 Manual de Usuario

OWNER’S MANUAL
Mini Hi-Fi
System
Please read this manual carefully before operating your set and retain it for
future reference.
MODEL
CK57 (CK57, CKS57F, CKS57W)
MFL70960402
www.lg.com
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
1807_Rev02
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance, contact
an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
NOTICE: For safety marking information including
product identification and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
Getting Started
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords, frayed
power cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could result
in electric shock or fire. Periodically examine the
cord of your device, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of
the device, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the device.
This device is equipped with a portable battery or
accumulator.
How to Safely remove the batteries or the battery
pack from the equipment:
To Remove the old batteries or battery pack, follow
the assembly steps in reverse order. To prevent
contamination of the environment and bring on
possible threat to human and/or animal health, the
old batteries or the battery pack must be put in an
appropriate container at designated collection points.
Do not dispose of batteries or battery pack together
with other waste. It is recommended that you use
local, free reimbursement systems batteries or
battery packs, (may not be available in your area). The
batteries or the battery pack should not be exposed
to excessive heat such as sunshine, fire or the like.
CAUTION: No naked flame sources, such as lighted
candles, should be placed on the apparatus.
Symbols
~
Refers to alternating current(AC).
0
Refers to direct current(DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
1
Getting Started
Check the specification page of this owner’s manual
to be certain of the current requirements.
3
4
Table of Contents
Table of Contents
1
Getting Started
3
Operating
2
4
6
7
7
7
7
8
10
12
Safety Information
Table of Contents
Unique Features
Playable file Requirement
– Music file requirement
– Compatible USB Devices
– USB device requirement
Remote control
Front panel
Rear panel
17
17
17
18
Basic Operations
– CD/USB Operations
– Auto Play
– Selecting a folder and
an MP3/WMA file
– Deleting a file/folder or format
– AUTO DJ
Using BLUETOOTH® wireless technology
– Listening to music stored on the Bluetooth
devices
Using the Music Flow Bluetooth App
– About “Music Flow Bluetooth” App
– Install “Music Flow Bluetooth” App onto
Your Bluetooth Device
– Activate Bluetooth with “Music Flow
Bluetooth” App
Radio Operations
– Listening to the radio
– Improving poor FM reception
– Presetting the Radio Stations
– Deleting all the saved stations
Sound adjustment
– Setting the sound mode
Advanced Operations
– Recording to USB
– JUKE BOX Playback
Other Operations
– Turn off the sound temporarily
– CHILDSAFE Mode
– DEMO
– Resume stop
– Using Microphone
– LIGHTING
– Sleep Timer Setting
– Dimmer
2
Connecting
14
14
14
Connecting to speakers
– Attaching the speakers to the unit
– Attaching the speaker light cables to the
unit
– Attaching the subwoofer to the unit
Optional Equipment Connection
– AUX IN Connection
– PORT. IN Connection
– USB Connection
– Antenna Connection
14
15
15
15
16
16
19
19
20
20
23
23
23
24
25
25
25
25
25
26
26
27
27
29
30
30
30
30
30
31
33
34
34
Table of Contents
34
35
35
36
36
36
37
38
– Auto power down
– AUTO POWER On
– Auto function change
Setting the Clock
– Setting the Clock through “Music Flow
Bluetooth” App
– Using your player as an alarm clock
LG Sound Sync
WIRELESS PARTY LINK Connection
5
1
2
3
4
Troubleshooting
39
39
Troubleshooting
– General
5
Appendix
41
42
42
43
43
43
General specifications
Speakers specifications
Trademarks and Licenses
Maintenance
– Notes on Discs
– Handling the Unit
4
5
6
Getting Started
Unique Features
1
BLUETOOTH®
Listens to music stored on your Bluetooth device.
Getting Started
Portable In
Listens to music from your portable device.
(MP3, Notebook, etc.)
AUTO DJ
Blends the end of one song into the beginning of
another for seamless playback.
USB Direct Recording
Records music to your USB device.
Music Flow Bluetooth
Music Flow Bluetooth is an app designed to let you
take control of some of LG’s latest audio devices.
(Page 23)
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
Getting Started
Playable file Requirement
Music file requirement
yy Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yy Maximum files : Data CD : 999 / USB : 2,000
yy Maximum folders : Data CD : 99 / USB : 200
Compatible USB Devices
yy MP3 Player : Flash type MP3 player.
yy USB Flash Drive :
Devices that support USB2.0 or USB1.1.
yy The USB function of this unit does not support all
USB devices.
USB device requirement
yy Devices which require additional program
installation when you have connected it to a
computer, are not supported.
yy Do not extract the USB device while in operation.
yy File extensions : “.mp3”/ “.wma”
yy Certain MP3/WMA files may not be played
depending on the type or format of the file.
yy For a large capacity USB, it may take longer than a
few minute to be searched.
yy CD-ROM file format : ISO 9660/ JOLIET
yy We recommend that you use Easy-CD Creator,
which creates an ISO 9660 file system.
yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
yy A protected file by DRM (Digital rights
management) cannot be played on the unit.
yy The DTS disc is not supported.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot use
it on LG players.
(Mastered/Live File System : Disc format system for
Windows Vista)
yy To prevent data loss, back up all data.
yy Using NTFS file system is not supported. (Only
FAT(16/ 32) file system is supported.)
yy This unit recognizes up to 2,000 files.
yy External HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
yy USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
yy Some USB may not work with this unit.
1
Getting Started
MP3/WMA file compatibility with this unit is limited
as follows.
yy Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
7
8
Getting Started
Remote control
• • • • • • • • • • • • • • a• • • • • • • • • • • • • •
1 (Standby) : Turns the power on or off.
B (Open/Close) : Opens and closes the disc tray.
VOL (Volume) +/- : Adjusts speaker volume.
1
F (Function) : Selects the function and input source.
Getting Started
Input source / Function
Disc
Display
CD
USB
USB 1 / USB 2
AUX input
AUX
Portable input
PORTABLE
Bluetooth
BT
LG Sound Sync (Wireless)
LG TV
Radio
FM / AM
[(Mute) : Mutes the sound.
PRESET·FOLDER W/S :
-- Chooses a preset number for a radio station.
(Page 25)
-- Searches for a folder of MP3/WMA files. When
a CD/USB containing MP3/WMA files in several
folders is being played, press PRESET·FOLDER
W/S to select the folder you want to play.
JUKEBOX/MEMORY :
-- Stores radio stations. (Page 25)
-- Selects JUKE BOX mode. (Page 29)
-- Makes JUKE BOX list.
AUTO DJ : Selects the AUTO DJ mode. (Page 19)
Replacement of battery
DELETE :
-- Deletes MP3/WMA files. (USB only) (Page 19)
-- Deletes a song on the JUKE BOX list.
-- Deletes all the saved stations.
(R03
)
(R03)
Remove the battery cover on the rear of the remote
control, and insert the battery with 4 and 5
matched correctly.
Getting Started
9
• • • • • • • • • • • • • • c• • • • • • • • • • • • • •
0 to 9 numerical buttons : Selects numbered tracks,
files, or preset number.
TUNING-/+ : Selects the radio stations.
CLOCK : Sets a clock and checks a time.
C/V (Skip/Search) :
ALARM : With the ALARM function you can turn on
CD, USB play and tuner reception at a desired time.
-- Skips backward or forward.
-- Searches for a section within a track/file.
N (Play/Pause) :
-- Starts or pauses playback.
• • • • • • • • • • • • • • d• • • • • • • • • • • • • •
VOICE CANCELLER : You can reduce the vocal tones
during music playback from various input sources.
-- Stops playback.
SLEEP : Sets the system to turn off automatically at
a specified time.
(Dimmer : The display window will be darkened by
half.)
-- Cancels DELETE function.
SET : Confirms the setting.
EQUALIZER : Chooses sound impressions.
SPECIAL EQ : Chooses special equalizer.
KEY CHANGER (l/L) : Changes the key to suit
your vocal range.
J (Information) :
MIC ECHO : Selects ECHO mode.
-- Sees information about your music. An MP3 file
often come with ID3 tag. The tag gives the Title,
Artist, Album or Time information.
? : This button is not available.
-- Sees Bluetooth device name of the unit in BT
READY.
USB REC :
-- Sees the name of connected all Bluetooth device
in Bluetooth mode.
-- To stop Recording, press and hold for 3 seconds.
-- Selects stereo/mono.
Z (Stop) :
-- When these units are successfully connected each
other in WIRELESS PARTY LINK mode, each of
connected device names appears in the each unit.
VOCAL EFFECTS : Selects various vocal effects
mode.
-- Records to USB.
1
Getting Started
• • • • • • • • • • • • • • b• • • • • • • • • • • • • •
REPEAT : Listens to your tracks/files repeatedly or
randomly.
10 Getting Started
Front panel
1
Getting Started
a
i
b
c
j
k
d
l
e
m
f
n
g
h
a USB 1 Port
You can play sound files by connecting the USB
device.
b Display window
c 1 (Standby)
o
e SPECIAL EQ / BASS BLAST (or BASS BLAST+)
-- Chooses special equalizer.
-- Press and hold to select BASS (or BASS+) effect
directly.
SEARCH
Turns the power on or off.
Moves to folder or file in selection mode.
USB REC / DEMO
OK
-- Records to USB.
-- To stop Recording, press and hold for 3 seconds.
-- In power off status, if you press USB REC /
DEMO, show DEMO mode.
C (Skip/Search)
-- Skips backward.
-- Searches for a section within a track/file.
-- Selects the radio stations.
Z (Stop)
Stops playback or cancels DELETE function.
d EQUALIZER / SEARCH
-- Chooses sound impressions.
-- Searches a folder or a file.
-- Selects the lighting effects.
Selects a folder when searching a file.
f LIGHTING
Selects lighting mode.
VOICE CANCELLER
You can reduce the vocal tones during music
playback from various input sources.
g PORTABLE IN jack
MIC (Microphone) jack
h Disc tray
Getting Started
l MASTER VOL. (Volume) / MULTI
i USB 2 Port
You can play sound files by connecting the USB
device.
(Remote sensor)
j
11
-- Adjust speaker volume.
-- Adjust microphone volume.
-- Selects vocal effects.
m VOCAL EFFECTS
Selects the function and input source.
Input source / Function
Display
Disc
CD
USB
USB 1 / USB 2
AUX input
AUX
Portable input
PORTABLE
Bluetooth
BT
LG Sound Sync (Wireless)
LG TV
Radio
FM / AM
3 WIRELESS LINK
-- S
elects MAIN or OTHER on WIRELESS PARTY
LINK mode.
-- Enable or disable WIRELESS PARTY LINK mode.
V (Skip/Search)
-- Skips forward.
-- Searches for a section within a track/file.
-- Selects the radio stations.
B (Open/Close)
Opens and closes the disc tray.
Selects VOCAL EFFECTS mode.
MIC VOL (Microphone volume)
Selects microphone volume mode.
MIC ECHO
Selects ECHO mode.
n KEY CHANGER (l/L)
Changes the key to suit your vocal range.
o AUTO DJ
Selects the AUTO DJ mode.
N (Play/Pause)
-- Starts or pauses playback.
-- Selects stereo/mono.
1
Getting Started
k F (Function)
12 Getting Started
Rear panel
1
Getting Started
a
100
b
a Power cord
b SPEAKERS connector
c SPEAKER LIGHTING SYSTEM
Connect the speaker lighting cables.
d AUX IN (L/R)
Connect an auxiliary device.
e ANTENNA (FM/AM)
100
c d e
Getting Started
13
Useful functions for using the unit
Function
Description
Do this
BT Lock On/Off It allows you to connect a
Bluetooth device only on BT
(Page 22)
(Bluetooth) and LG TV functions.
ON
Press and hold N for 5 seconds in BT
(Bluetooth) function.
Auto Power On It allows the unit to turn on
automatically by input signals :
(Page 35)
BT (Bluetooth) or LG TV
ON
Turn off the unit by pressing 1 on the unit
for 5 seconds.
OFF
Turn off the unit by pressing 1 on the unit
for 5 seconds.
Initial setting of this function was OFF
set to off.
Press and hold N for 5 seconds in BT
(Bluetooth) function.
1
Getting Started
To do
14 Connecting
Connecting to speakers
Attaching the speakers to the
unit
2
Attaching the subwoofer to the
unit
Connect a woofer cord to the player.
When connecting a woofer cord to the player, insert
the connector until it clicks.
To connect the cable to the unit, press each plastic
finger pad to open the connection terminals on the
unit. Insert the wire and release the finger pad.
Connecting
Connect the black of each wire to the terminals
marked - (minus) and the other end to the terminals
marked + (plus).
>>Caution
yy When you connect the speakers to the unit,
make sure to connect the speaker’s cable and
plug to the corresponding speaker connector.
yy Check the volume level before playing music
to prevent infirm, child, and pregnant women
from being shocked by the sudden and loud
sound from the unit.
Attaching the speaker light
cables to the unit
To connect the speaker light cable to the unit,
insert the cable to SPEAKER LIGHTING SYSTEM
connectors on the unit.
yy Do not use the unit in a limited space. It may
damage a person’s hearing. It is recommended
to use it in a wide space.
yy Be careful to make sure children do not put
their hands or any objects into the *speaker
duct.
* speaker duct : A hole for plentiful bass
sound on speaker cabinet (enclosure)
yy Use the speaker supplied with this unit
only. Using any other speaker may cause
malfunction.
yy The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
yy Avoid looking at the speaker lights for a long
time. It may cause damage to eyesight.
>>Caution
yy Make sure that the jacks and the speakers
are matched correctly.
yy Make sure to connect the cables to
connectors tightly on the unit.
Connecting 15
Optional Equipment
Connection
PORT. IN Connection
Connect an output (earphone or line out) of portable
device (MP3 or PMP etc) to the PORTABLE IN (3.5
mm) connector.
AUX IN Connection
Connect an output of auxiliary device (Camcorder, TV,
Player, etc) to the AUX IN (L/R) connector.
2
3.5 mm stereo cable
PORTABLE IN
White
Audio cable
Red
Listening to music from your portable
player or external device
The unit can be used to play the music from many
types of portable player or external device.
DVD, Blu-ray player etc.
1. Connect the portable player to the PORTABLE
IN connector of the unit.
Or
Connect the external device to the AUX IN (L/R)
connector of the unit.
2. Turn the power on by pressing 1.
3. Press F to select AUX or PORTABLE function.
4. Turn on the portable player or external device and
start it playing.
,,Note
Automatically switches to the PORTABLE
function when you connect the portable device
to the PORTABLE IN connector.
Connecting
If your device has only one output for audio(mono),
connect it to the left(white) audio jack on the unit.
16 Connecting
USB Connection
Antenna Connection
Connect a USB device (or MP3 player, etc.) to the
USB ports on the unit.
Connect the supplied FM/AM antenna for listening to
the radio.
Connect the FM wire antenna to the FM antenna
connector.
Connect the AM loop antenna to the AM antenna
connector.
2
Connecting
FM antenna
,,Note
Removing the USB device from the unit :
1. Choose a different function/mode or
press Z twice in a row.
2. Remove the USB device from the unit.
AM antenna
,,Note
yy Be sure to fully extend the FM wire antenna.
yy To prevent noise pickup, keep the AM Loop
antenna away from the unit and other
components.
Operating 17
Basic Operations
CD/USB Operations
1. Insert the disc by pressing B.
Or connect the USB device to the USB port.
2. Select CD or USB function by pressing F.
To
Do this
,,Note
yy Repeat/Shuffle playback operates as follows.
On Display
OFF
ONE
Plays a same song repeatedly.
FOLDER
Stop
Press Z.
ALL
Playback
Press N.
SHUFFLE
Pause
Press N during playback.
Selecting
a track/file
directly
Press 0 to 9 numerical buttons on
the remote control to go to the
desired file or track directly.
-- In stop status,
Press C/V to go to the next/
previous track/file.
-- During playback,
(1) By using C/V buttons :
Skipping to
the next/
previous
track/file
Press V to go to the next track/
file.
Playing in less than 3 seconds, press
C to go to the previous track/file.
Playing after 3 seconds, press C
to go to the beginning of the track/
file.
(2) By using SEARCH :
Rotate EQUALIZER / SEARCH or
C/V and press N to play the
track/file.
Press REPEAT on the remote
Playing
control repeatedly. Refer to the
repeatedly or
note for details about the display
randomly
change.
Plays songs in a folder repeatedly.
(Except AUDIO CD)
Plays all the songs repeatedly.
Plays all the songs once
randomly, and stops the playback.
yy When you play JUKE BOX list, only ONE and
ALL are available.
yy Even after restarting the unit or switching
one function to another, you can listen to
music from the point where it’s last been
played.
yy If you leave the disc tray open for 5 minutes,
it will close automatically.
Auto Play
-- AUDIO/MP3/WMA CD is played automatically
after disc tray is opened and then closed.
-- Automatically the unit switches to the CD function
if disc tray is opened and then closed even when
there is no disc in disc tray.
3
Operating
Searching
Press and hold C/V during
for a section
playback and release it at the point
within a track/
you want to listen to.
file
Description
Plays songs in order and stops
the playback.
18 Operating
Selecting a folder and
an MP3/WMA file
On the unit
1. Press SEARCH and rotate EQUALIZER /
SEARCH or C/V until a desired file appears.
You can also search a folder if you press SEARCH
again.
,,Note
yy CD/USB Folders/Files are recognized as
below.
*
2. Press OK or N to play the selected file. When
you search a folder, press OK to select a file in the
folder, then press OK or N again. The selected
file is played.
3
On the remote control
Operating
1. Press PRESET·FOLDER W/S or C/V
repeatedly until a desired folder appears.
2. Press N to play it. The first file of folder will be
played.
yy If there is no file in a folder, the folder will not
appear.
yy Folders will be presented as the following
order;
ROOT FOLDER 1 FOLDER 3
FOLDER 7 FOLDER 8 FOLDER 5
FOLDER 6
yy File will be played from $ file No.1 to $ file
No.14 one by one.
yy Files and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
*ROOT : The first screen you can see when a
computer recognize the CD/USB is “ROOT”.
Operating 19
Deleting a file/folder or format
AUTO DJ
You can delete file, folder on your USB or format the
USB.
Auto DJ blends the end of one song into the
beginning of another for seamless playback.
It equalizes volume across tracks/files for
uninterrupted playback.
1. Select USB function by pressing F.
2. Press DELETE on the remote control repeatedly,
the display changes as followings.
DEL FILE
DEL DIR
FORMAT
On Display
Description
DEL FILE
Select the file you want to delete.
DEL DIR
Select the folder you want to
delete.
FORMAT
Select to format the USB device.
3. To delete file/folder or format, press and hold
DELETE on the remote control.
>>Caution
yy Do not extract the USB device during
operation. (play, delete, etc.)
SHUFFLE
SEQUENTIAL
OFF
On Display
Description
OFF
-
SHUFFLE
The music is played randomly on
this mode.
SEQUENTIAL
The music is played repeatedly on
this mode.
,,Note
yy AUTO DJ mode does not support searching
for a section within a track/file or to play
repeatedly or randomly.
yy Regular back up is recommended to prevent
data loss.
yy If you move to other functions or stop the
music using Z on AUTO DJ mode, AUTO DJ
will be disabled.
yy The delete function may not be supported
according to the USB status. (lock, etc.)
yy AUTO DJ is not supported in the music file
whose length is less than 60 seconds.
yy Only SEQUENTIAL is selected when played
JUKE BOX list.
3
Operating
If you want to exit the current mode, press Z.
Press AUTO DJ repeatedly, the display changes as
followings.
20 Operating
Using BLUETOOTH®
wireless technology
Listening to music stored on the
Bluetooth devices
About Bluetooth
Before you start the pairing procedure, make sure the
Bluetooth feature is activated on your Bluetooth
device. Refer to your Bluetooth device’s user guide.
Once a pairing operation is performed, it does not
need to be performed again.
Bluetooth is wireless communication technology for
short range connection.
The sound may be interrupted when the connection
interfered by the other electronic wave or you
connect the Bluetooth in the other rooms.
3
Operating
Connecting individual devices under Bluetooth
wireless technology does not incur any charges. A
mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
yy Available Devices : Smart phone, MP3, Notebook,
etc.
yy Version : 4.0
yy Codec : SBC, AAC
Bluetooth Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Pairing your unit and Bluetooth device
1. Turn on the unit.
,,Note
When Bluetooth connection lock is activated,
you can search Bluetooth device in BT function.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device display
depending on the type of Bluetooth device. Your
unit appears as “LG CK57 (XX)”.
,,Note
yy XX means the last two digits of
Bluetooth address. For example, if your
unit has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see “LG CK57
(08)” on your Bluetooth device.
yy Depending on the Bluetooth device type,
some devices may have a different pairing
process. Enter the PIN code (0000) as
needed.
yy You can connect this unit with up to 3
Bluetooth devices simultaneously using the
same method as described above, only in the
Bluetooth function.
yy The multi phone pairing connection is only
supported on Android devices. (multi phone
pairing connection may not be supported
depending on the connected device
specifications.)
yy Removable/detachable Bluetooth devices
(Ex: Dongle etc.) will not support multi phone
pairing.
Operating 21
3. When this unit is successfully connected with
your Bluetooth device, “PAIRED” appears on the
display window and change to Bluetooth device
name soon. Then “BT” will appear on the display
window.
,,Note
yy "PAIRED" will momentarily appear on the
display when you connect other devices for
multi phone pairing.
yy If the device name is unavailable, “_” will be
displayed.
4. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
yy When using Bluetooth technology, you have
to make a connection between the unit and
the Bluetooth device as close as possible and
keep the distance.
However, it may not work well in certain
situations as described below :
-- There is a obstacle between the unit and
the Bluetooth device.
-- There is a device using same frequency
with Bluetooth technology such as a
medical equipment, a microwave or a
wireless LAN device.
yy If Bluetooth connection does not work well,
try pairing it again.
yy Even if this unit connected up to 3 Bluetooth
devices in the Bluetooth mode, you can play
and control music by using only one of the
connected devices.
yy Depending on the type of the device, you may
not be able to use the Bluetooth function.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc.
yy The more distance between the unit and the
Bluetooth device, the lower the sound quality
becomes.
yy Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets far from the unit.
yy When Bluetooth connection is disconnected,
connect the Bluetooth device to the unit
again.
yy When a Bluetooth device is not connected,
“BT READY” appears on the display window.
yy When you use the Bluetooth function, adjust
the volume to a proper level on the Bluetooth
device.
yy When you connect Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized with
each other.
yy Bluetooth connection will be disconnected
when you change the Bluetooth function
to the others. In “Music Flow Bluetooth” app
connection, only one device which you are
playing keeps Bluetooth connection. You can
control the Bluetooth device with this unit
but you cannot use sound output.
yy When entering Bluetooth function, this unit
automatically connect to Bluetooth device
which is connected the last or playbacked the
last.
(Auto connection may not be supported
depending on the connected device
specifications.)
3
Operating
,,Note
,,Note
yy The sound may be interrupted when the
connection has interference from other
electronic devices.
22 Operating
Controls connected Bluetooth device
You can control connected Bluetooth device by the
unit; play, pause, stop, skip.
,,Note
yy Only Android OS and iOS is available to use
this function.
yy This function may not be supported
depending on the Bluetooth device, or
operated differently.
Bluetooth connection lock (BT LOCK)
3
You can limit Bluetooth connection to only
BT (Bluetooth) and LG TV function to prevent
unintended Bluetooth connection.
Operating
To turn on this function, press and hold N for about
5 seconds in BT (Bluetooth) function.
“ON-BT LOCK” appears then you can limit Bluetooth
connection.
To turn off this function, press and hold N for about
5 seconds in BT (Bluetooth) function.
“OFF-BT LOCK” appears.
,,Note
Even if you set up Bluetooth connection lock to
On, this unit turns on by Auto Power function.
Turn off Auto Power function to prevent it.
Operating 23
Using the Music Flow
Bluetooth App
,,Note
Install “Music Flow Bluetooth”
App onto Your Bluetooth Device
There are two ways to install “Music Flow Bluetooth”
app onto your Bluetooth device.
yy Only Android OS is available to use “Music
Flow Bluetooth” app with this unit.
Install “Music Flow Bluetooth” App
through QR code
yy It is recommended to use the latest version
of app.
1. Install “Music Flow Bluetooth” app through QR
code. Use the scanning software to scan the QR
code.
About “Music Flow Bluetooth”
App
3
To enjoy more features, you are recommended to
download and install free “Music Flow Bluetooth”
app.
Here is introduce a few of the many features of
“Music Flow Bluetooth” app.
Multi Juke box : Your entertainment increases three
fold when you connect up to 3 Bluetooth phones at
the same time. Play music from all three phone and
create a customized playlist from all the phones.
2. Tap an icon for installation.
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device
has a scanning software application. If you
don’t have one, download one from “Google
Android Market (Google Play Store)”.
yy Depending on the area, QR code may not
work.
Operating
“Music Flow Bluetooth” app brings a suite of new
features to this unit.
24 Operating
Install “Music Flow Bluetooth” App
through “Google Android Market
(Google Play Store)”
1. Tap the “Google Android Market (Google Play
Store)” icon.
Activate Bluetooth with “Music
Flow Bluetooth” App
“Music Flow Bluetooth” app helps to connect your
Bluetooth device to this unit.
2. In the search bar, type in the “Music Flow
Bluetooth” and search it.
1. Tap “Music Flow Bluetooth” app icon on the home
screen to open “Music Flow Bluetooth” app, and
go to the main menu.
3. In the search result list, find and tap “Music Flow
Bluetooth” to start downloading Bluetooth app.
2. If you want to get more information to operate,
tap [Setting] and tap [Help] menu.
4. Tap an icon for installation.
5. Tap an icon for downloading.
3
yy Make sure that your Bluetooth device is
connected to the Internet.
Operating
,,Note
yy Make sure that your Bluetooth device is
equipped with “Google Android Market
(Google Play Store)”.
,,Note
yy “Music Flow Bluetooth” app will be available
in the software version as follow;
-- Android O/S : Ver 4.0.3 (or later)
yy If you use “Music Flow Bluetooth” app for
operation, there would be some differences
between “Music Flow Bluetooth” app and
the supplied remote control. Use the supplied
remote control as necessary.
yy Depending on the Bluetooth device, “Music
Flow Bluetooth” app may not work.
yy After connection of “Music Flow Bluetooth”
app, music may be output from your device. In
this case, try connecting procedure again.
yy If you operate the other applications or
change the settings on your Bluetooth
device while using “Music Flow Bluetooth”
app, “Music Flow Bluetooth” app may operate
abnormally.
yy When “Music Flow Bluetooth” app operates
abnormally, check your Bluetooth device and
the connection of “Music Flow Bluetooth” app
and then try to connect again.
yy Depending on the smart phone's operating
system, you have some differences for “Music
Flow Bluetooth” operation.
yy Check Bluetooth setting on your Bluetooth
device if “Music Flow Bluetooth” app
connection does not work well.
Operating 25
Radio Operations
Be sure that both FM and AM aerials are connected.
(Page 16)
Listening to the radio
1. Press F until FM or AM appears in the display
window.
The last received station is tuned in.
Presetting the Radio Stations
You can preset 50 stations for FM and AM.
Before tuning, make sure to turn down the volume.
1. Press F until FM or AM appears in the display
window.
2. Select the desired frequency by pressing
TUNING -/+ on the remote control or C/V
on the unit.
3. Press JUKEBOX/MEMORY on the remote
control. A preset number will blink in the display
window.
2. Auto tuning :
Press and hold TUNING-/+ on the remote control
or C/V on the unit for about two seconds
until the frequency indication starts to change,
then release. Scanning stops when the unit tunes
in a station.
5. Press JUKEBOX/MEMORY on the remote
control. The station is stored.
Or
6. Repeat steps 2 to 5 to store other stations.
3. Adjust the volume by pressing VOL +/- on the
remote control or rotating MASTER VOL. /
MULTI knob on the unit repeatedly.
Improving poor FM reception
Press N. This will change the tuner from stereo to
mono and usually improve the reception.
7. To listen a preset station, press
PRESET·FOLDER W/S or 0 to 9 numerical
buttons on the remote control.
Deleting all the saved stations
1. Press DELETE on the remote control.
“DEL ALL” will flash up on the unit display.
2. Press DELETE on the remote control to erase all
the saved radio stations.
“DELETED ALL” will flash up on the unit display.
3
Operating
Manual tuning :
Press TUNING-/+ on the remote control or
C/V on the unit repeatedly.
4. Press PRESET·FOLDER W/S on the remote
control to select the preset number you want.
26 Operating
Sound adjustment
Setting the sound mode
This system has a number of pre-set surround sound
fields. The displayed items for the equalizer may be
different depending on sound sources and effects.
You can select a desired sound mode by using
EQUALIZER on the remote control.
On Display
3
BASS (BASS BLAST)
or
BASS+ (BASS BLAST+)
Operating
POP
CLASSIC
ROCK
JAZZ
Description
Reinforces the bass
and powerful sound.
This program lends
an enthusiastic
atmosphere to the
sound, giving you the
feeling you are at an
actual rock, pop, jazz or
classic concert.
FOOTBALL
You can enjoy the
equalizer FOOTBALL
STADIUM.
STANDARD
You can enjoy
optimized sound.
You can select a desired sound mode by using
SPECIAL EQ on the remote control or SPECIAL EQ /
BASS BLAST (or BASS BLAST+) on the unit.
On Display
FUNK, REGUETON,
SAMBA,
MERENGUE, AXE,
SALSA, SERTANEJ,
FORRO
ARABIC
DANGDUT
Region
Description
Latin
America
Optimized
equalizer
Middle East for the
music genre
prefered in
Indonesia
each region.
AFRO
Africa
INDIA
India
,,Note
yy On some speakers, sound may not be heard
or heard in low sound depending on the
sound mode.
yy By pressing and holding SPECIAL EQ / BASS
BLAST (or BASS BLAST+) on the unit for 3
seconds you can directly select BASS (BASS
BLAST) or BASS+ (BASS BLAST+) effect.
Operating 27
Advanced Operations
Recording to USB
You can record a various sound source to USB.
(CD, USB1, AUX, PORTABLE, FM, AM)
1. Connect the USB device to the unit.
2. Press F to select a function you want to record.
3. Start the recording by pressing USB REC on the
remote control or USB REC / DEMO on the unit.
Function
Status
Result
Play/Pause Recorded until stop
To stop recording, press and hold USB REC on the
remote control or USB REC / DEMO on the unit for
3 seconds. Otherwise, the recording continues.
Pausing recording
During CD/USB playback or pause, or external sound
source recording, press USB REC on the remote
control or USB REC / DEMO on the unit to pause
recording. Press it again to restart recording.
,,Note
yy VOICE CANCELLER or KEY CHANGER
will be reset, if you use recording function
during operating VOICE CANCELLER or KEY
CHANGER.
yy VOICE CANCELLER or KEY CHANGER can
not be operated during recording.
Quick recorded All songs
In case below, scope is
limited.
- After File search (Page
18), quick recorded an
indexed song
CD, USB
Full stop
- Only while the Folder
name is displayed on the
display window, quick
recording All songs on
Folder. (Folder Search
Mode is released when
there is no button input
for a few seconds after
entering the folder search
mode.) (Page 18)
- After JUKE BOX On
(Page 29), quick
recorded All songs of
JUKE BOX
AUX,
PORTABLE,
FM, AM
-
Recorded until stop
-- If you connect both USB1 and USB2, press
USB REC on the remote control or
USB REC / DEMO on the unit when USB1 or
USB2 which you want to record blinks in the
display window.
To select recording bit rate
1. Press and hold USB REC on the remote control
or USB REC / DEMO on the unit for 3 seconds.
2. Press C/V to select a bit rate.
3. Press USB REC on the remote control or
USB REC / DEMO on the unit to finish the
setting.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound recordings,
may be an infringement of copyrights and
constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
3
Operating
Resume stop Quick recorded the latest
(Page 30) song
To stop recording
28 Operating
,,Note
3
,,Note
yy When you stop recording, the file that has
been recorded at that time will be stored.
(Except when recording MP3/ WMA files that
are in stop status.)
yy You can record MIC. (Except when recording
USB/ CD that are in stop status.)
yy Do not remove the USB device or turn off
the unit during USB recording. If does not, an
incomplete file may be made and not deleted
on PC.
yy You may not store more than 2,000 files.
yy In case of the unsupported MP3/WMA file,
the file recording may be stopped.
yy If USB recording does not work, the message
like “NO USB”, “ERROR”, “USB FULL”, “NOT
SUPPORT” or “FILE MAX” is displayed on the
display window.
yy It’ll be stored as follows.
yy Multi card reader device or external HDD can
not be used for USB recording.
Operating
yy A file is recorded by about 512 Mbyte when
you record for a long term.
$%@3&$
"6%*0@
"6%*0@
yy You can control recorded microphone sound
according to microphone volume.
yy When you are recording during playback, the
sound now playing is output.
AUDIO CD
MP3/WMA
Play or pause status
Play or pause status
$%@3&$
"6%*0@
"6%*0@
The other status
$%@3&$
'*-&@3&$
"6%*0@ 53"$,@
"6%*0@ 53"$,@
The other source*
05)&34@3&$
"6%*0@
"6%*0@
* : AUX and the like.
'*-&@3&$ $%@3&$
"6%*0@
53"$,@
"6%*0@
53"$,@
'*-&@
"
%
The other status
'*-&@3&$
"#$ 'JMFOBNF
%&' 'JMFOBNF
Tuner
56/&3@3&$
%+@.*9@3&$
"6%*0@@'.
.*9@
"6%*0@@".
.*9@
5IFPUIFSTUBUVT
5IFPUIFSTUBUVT
1MBZPSQBVTFTUBUVT
1MBZPSQBVTFTUBUVT
Tuner : The current recording frequency is shown
1
Operating 29
JUKE BOX Playback
Editing JUKE BOX
JUKE BOX function enables you to make a playlist of
your favorite tracks/files from a disc or USB device.
A playlist of up to 100 tracks/files can be entered.
1. Press and hold JUKEBOX/MEMORY on the
remote control to enter the edit mode.
(Playing will be stopped when you press
JUKEBOX/MEMORY on the remote control.)
Making JUKE BOX list
2. Press PRESET·FOLDER W/S on the remote
control to select a track/file to edit.
1. Press and hold JUKEBOX/MEMORY on the
remote control to enter the edit mode.
(Playing will be stopped when you press
JUKEBOX/MEMORY on the remote control.)
2. Select a track/file by pressing C/V on the
remote control.
3. Press JUKEBOX/MEMORY on the remote
control to save the track/file.
5. Press JUKEBOX/MEMORY on the remote
control once again.
To play the JUKE BOX list, press N on the remote
control after you make the list.
,,Note
When making or modifying the JUKE BOX list,
REPEAT mode is off.
Enjoying JUKE BOX
Press JUKEBOX/MEMORY on the remote control
once. “ON - JUKE BOX” appears on the display
window.
To play JUKE BOX list, press N on the remote control.
To cancel it, press JUKEBOX/MEMORY on the
remote control once. “OFF - JUKE BOX” appears on
the display window.
4. Press JUKEBOX/MEMORY on the remote
control.
5. Repeat 2 to 4 to store the other tracks/files.
6. Press JUKEBOX/MEMORY on the remote
control once again.
To play the JUKE BOX list, press N on the remote
control after you edit the list.
Deleting JUKE BOX list
Deleting function only works in the edit mode.
1. Press and hold JUKEBOX/MEMORY on the
remote control to enter the edit mode.
Or
Press DELETE on the remote control while JUKE
BOX is played to enter the edit mode.
2. Select a song by pressing PRESET·FOLDER
W/S on the remote control repeatedly.
3. Press DELETE on the remote control while a
song is selected.
,,Note
yy If there is no JUKE BOX list, “NO PROG”
appears on the display window when you
press JUKEBOX/MEMORY on the remote
control.
yy JUKE BOX is switched off in the case below.
-- Changing to a different function.
-- Turning off and on the unit.
-- Operating the numerical buttons on the
remote control.
-- Playing a file by using SEARCH and
EQUALIZER / SEARCH on the unit.
yy JUKE BOX list is cleared in the case below.
-- Removing the disc or the USB device.
-- Deleting or recording music files in the USB
device.
3
Operating
4. Repeat steps 2 - 3 to store other tracks/files.
(You can modify the list by pressing
PRESET·FOLDER W/S on the remote control to
select the JUKE BOX program number.)
3. Press C/V on the remote control.
30 Operating
Other Operations
Turn off the sound temporarily
Press [ on the remote control to mute your sound.
You can mute your unit, for example, to answer the
telephone, the “MUTE” will appear in the display
window.
To cancel it, press [ on the remote control again or
change the volume level.
DEMO
In the power off state, press USB REC / DEMO on
the unit once. The unit will power on and display the
each of functions in the display window.
To cancel the DEMO function, press USB REC /
DEMO on the unit once more.
,,Note
You can enjoy other functions during the DEMO,
the DEMO will temporarily pause.
-- Without input key in 10 sec, the DEMO will
playback automatically.
CHILDSAFE Mode
3
Operating
This function helps to prevent you from being
surprised when you turn on the unit in case that the
volume of the unit is set at a high level.
To turn on CHILDSAFE mode, press and hold OK on
the unit when the volume of the unit is “MIN”.
In CHILDSAFE mode, the volume increase gradually.
To turn off CHILDSAFE mode, press and hold OK on
the unit when the volume of the unit is “MIN” and
this mode is turned on.
,,Note
In case of CD, USB or BT (Bluetooth) function,
CHILDSAFE mode does not work after about
2 minutes from power on the unit even if this
mode is enabled.
Resume stop
The unit records the point where you pressed Z
depending on the disc or USB. If you press Z twice,
the unit will clear the stopped point.
Operating 31
Using Microphone
VOICE CANCELLER
1. Connect your microphone to the MIC jack.
You can reduce the vocal tones during music playback
from various input sources.
2. Play the music you want.
3. Sing along with the accompaniment.
Adjust the microphone volume by pressing MIC
VOL and rotating MASTER VOL. / MULTI on the
unit in a clockwise or counterclockwise.
,,Note
yy When not using the microphone, set the MIC
volume to minimum or turn off the MIC and
remove the microphone from the MIC jack.
yy If sound through the microphone is extremely
loud, it may be distorted.
In this case, pressing MIC VOL and rotating
MASTER VOL. / MULTI on the unit.
yy You can give an echo effect to the sound from
the microphones by pressing MIC ECHO.
To cancel it, press VOICE CANCELLER again.
The quality of the VOICE CANCELLER may be
different depending on the recording conditions of
music files.
,,Note
yy This function is available CD, USB or BT
(Bluetooth) function.
yy If the function is not available, “NOT
SUPPORT” appears in the display window.
yy This function is available to use only when a
microphone is connected.
yy If a microphone is not connected, “INSERT
MIC” appears in the display window.
yy It is not available on the mono source.
yy To initialize it, change the function or
disconnect the microphone.
yy This function may not be initialized depending
on the status of connected devices.
3
Operating
yy If the microphone is set too near the speaker,
a howling sound may be produced.
In this case, move the microphone away from
the speaker or decrease the sound level by
using the MIC VOL and rotating MASTER
VOL. / MULTI on the unit.
Press VOICE CANCELLER and “ON - VOICE
CANCELLER” will appear in display window.
32 Operating
KEY CHANGER
VOCAL EFFECTS
You can adjust the key to 9 steps (4 steps higher, 4
steps lower and the original key).
When you connect your microphone to the MIC jack,
you can enjoy karaoke function by changing voice in
the various source.
yy To sharp the key one by one, press KEY
CHANGER(L) repeatedly during playback.
yy To flatten the key one by one, press KEY
CHANGER(l) repeatedly during playback.
,,Note
yy This function is available CD, USB or BT
(Bluetooth) function.
yy To initialize it, change the function, disconnect
the microphone or change the music.
3
yy This function may not be initialized depending
on the status of connected devices.
Operating
yy If the function is not available, “NOT
SUPPORT” appears in the display window.
yy If a microphone is not connected, “INSERT
MIC” appears in the display window.
To select various mode, pressing VOCAL EFFECTS
repeatedly or pressing VOCAL EFFECTS and then
turning MASTER VOL. / MULTI on the unit when
vocal effects mode appears in the display window.
BASS SOPRANO HELIUM ROBOT
DUET MAN DUET WOMAN BASS ECHO1
SOPRANO ECHO1 HELIUM ECHO1
ROBOT ECHO1 DUET MAN1 DUET
WOMAN1 BASS ECHO2 SOPRANO
ECHO2 HELIUM ECHO2 ROBOT ECHO2
DUET MAN2 DUET WOMAN2 OFF
,,Note
yy If a microphone is not connected, “INSERT
MIC” appears in the display window.
yy If you press KEY CHANGER or MIC ECHO
on the unit on VOCAL EFFECTS mode, after
backing up current VOCAL EFFECTS, turn
off VOCAL EFFECTS mode and operate KEY
CHANGER or ECHO mode.
yy To turn off VOCAL EFFECTS mode, press and
hold VOCAL EFFECTS.
Operating 33
ECHO
LIGHTING
When you connect your microphone to the MIC jack,
you can give an echo effect to the sound from the
microphones by pressing MIC ECHO.
This function offers a party atmosphere by operating
speaker lighting and beat of music.
ECHO 1
ECHO 2
ECHO OFF
,,Note
yy If a microphone is not connected, “INSERT
MIC” appears in the display window.
yy If you press VOCAL EFFECTS on ECHO
mode, after backing up current ECHO, turn
off ECHO mode and operate VOCAL EFFECTS
mode.
Press MIC ECHO again, after backing up
current VOCAL EFFECTS, operate ECHO
mode.
To select mode, pressing LIGHTING on the unit
repeatedly or pressing LIGHTING on the unit and
then turning EQUALIZER / SEARCH on the unit.
OFF PARTY PEACEFUL ROMANTIC
COOL UPBEAT FIERY EXCITED
DYNAMIC HEALING SUNNY OFF ...
,,Note
yy Lighting function is available in all functions.
yy Lighting mode retains its previous mode
when you first press LIGHTING on the unit,
press again to change modes.
3
Operating
34 Operating
Sleep Timer Setting
Dimmer
Press SLEEP on the remote control repeatedly to
select delay time between 10 and 180 minutes.
After the delay time, the unit will be turned off.
Press SLEEP on the remote control once.
The display window will be darkened by half.
To cancel the sleep function, press SLEEP on the
remote control repeatedly until “OFF” appears.
,,Note
yy You can check the remaining time before the
unit is turned off. Press SLEEP on the remote
control to check or change the remaining
time.
yy You can edit the remain time when displays
the remaining time or “DIMMER”.
3
To cancel it, press SLEEP on the remote control
repeatedly until “OFF” appears.
,,Note
All the lighting turns off when dimmer is being
operated.
Auto power down
Operating
This unit will turn itself off to save electricity in the
case were the main unit is not connected to an
external device and is not used for 15 minutes.
The unit will also turn itself off after six hours if the
main unit has been connected to another device
using the analog inputs.
Auto power down function is applied to only MAIN
unit in case of WIRELESS PARTY LINK connection.
In case of OTHER unit, Auto power down is available
after disconnection OTHER unit and MAIN unit.
Operating 35
AUTO POWER On
Auto function change
This unit automatically turns on by an input source :
Bluetooth or LG TV.
This unit recognizes input signals such as BLUETOOTH,
LG TV and Portable and then changes to the suitable
function automatically.
When you turn on your TV connected to this unit,
this unit recognizes the input signal and selects the
suitable function. You can hear the sound from the
unit.
When you try to connect Bluetooth
device
If you try to connect your Bluetooth device, this unit
turns on and connects your Bluetooth device.
You can play your music.
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected.
Play your music on the Bluetooth device.
When you turn off this unit by pressing 1 on the
unit for 5 seconds each time, you can turn on or off
the AUTO POWER function.
When 3.5 mm stereo cable is
connected
On Display
Description
AUTO POWER function is
turned on.
OFF - AUTO POWER
AUTO POWER function is
turned off.
,,Note
yy Depending on the connected device, this
function may not operate.
yy Depending on the connected device, the unit
turns on but Bluetooth function may not be
connected.
yy If you disconnect Bluetooth connection by
this unit, some Bluetooth devices try to
connect to the unit continually. Therefore it is
recommended to disconnect the connection
before turning off the unit.
yy If you try to connect to the “Music Flow
Bluetooth” app, Bluetooth function of this
unit is turned on.
yy If you turn on the unit using LG TV or
Bluetooth function, proper function of this
unit is turned on.
yy If you have already paired with this unit,
automatically this unit can turn on by an input
source when this unit is turned off.
When LG TV is connected
When you turn on your LG TV connected by LG
Sound Sync, this unit changes the function to LG TV.
You can hear the sound from your TV.
,,Note
yy This function is not available during recording
or deleting.
yy This function only works with devices that
were previously connected.
yy If the Bluetooth connection lock function
is set, Bluetooth and LG TV connection will
be only available on Bluetooth and LG TV
function.
3
Operating
ON - AUTO POWER
When you connect the portable device to the
PORTABLE IN connector, PORTABLE function is
selected. Play your music on the portable device.
36 Operating
Setting the Clock
Using your player as an alarm
clock
1. Turn the unit on.
1. Turn the unit on.
2. Press and hold CLOCK on the remote control.
2. Press and hold ALARM on the remote control.
3. Select time mode by pressing C/V on the
remote control.
3. Press C/V on the remote control to change
the hours and minutes and press SET on the
remote control to save.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4. Press SET on the remote control to confirm your
selection.
5. Select the hours by pressing C/V on the
remote control.
3
6. Press SET on the remote control.
Operating
7. Select the minutes by pressing C/V on the
remote control.
8. Press SET on the remote control.
Setting the Clock through
“Music Flow Bluetooth” App
Install “Music Flow Bluetooth” app on your Android
device. (Page 23-24)
Your unit’s clock will be automatically synchronized
with your device by activating Bluetooth connection
through “Music Flow Bluetooth” app.
4. Press C/V on the remote control to select
function and press SET on the remote control to
save.
-Press C/V on the remote control to select a
preset number when you select tuner and then,
press SET on the remote control.
If there is no preset number, this step is skipped.
5. Press C/V on the remote control to change
the volume and press SET on the remote control
to save.
,,Note
yy If you set the clock time, you can check the
time by pressing CLOCK on the remote
control even when the player is turned off.
yy You can set alarm after you set the clock
time.
yy If you set the clock time and alarm, you
can check the alarm setting information by
pressing ALARM on the remote control even
when the unit is turned off.
yy You can select ALARM ON/OFF mode by
pressing ALARM on the remote control.
Operating 37
LG Sound Sync
You can control some functions of this unit by
your TV’s remote control with LG Sound Sync. It is
compatible with LG TV that supports LG Sound Sync.
Make sure your TV has the LG Sound Sync logo.
Controllable function by LG TV’s remote control :
Volume up/down, mute
,,Note
yy You can also use the remote control of this
unit while using LG Sound Sync. If you use TV’s
remote control again, the unit synchronizes
with the TV.
(According to TV Specifications, the volume
and mute of this unit synchronize with TV.)
yy If the connection fails, check the conditions of
this unit and your TV : power, function.
yy Make sure of the condition of this unit and
the connection in the cases below when using
LG Sound Sync.
-- The unit is turned off.
1. Turn on the unit by pressing 1.
-- Disconnecting the wireless connection
caused by interference or a distance.
2. Press F until LG TV function is selected.
3. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [Sound] [TV Sound output]
[LG Sound Sync (Wireless)]
“PAIRED” appears on the display window for
about 3 seconds and then you can see “LG TV”
on the display window if the TV and this unit are
connected normally.
-- Changing to a different function.
yy The amount of time to turn off this unit is
different depending on your TV.
yy If you try to change the function on using
the LG TV function, volume will be changed
according to the LG TV volume level.
yy Details of TV setting menu vary depending on
models of your TV.
yy If you turned off the unit directly by pressing
1, LG Sound Sync will be disconnected.
To use this function again, you should
reconnect the TV and the unit.
yy The volume may be increased when the TV
and this unit is connected by LG Sound Sync.
Decrease the TV volume and then connect
with this unit.
yy When you turn on your LG TV connected
by LG Sound Sync or enter LG TV function,
this unit changes the function to LG TV
automatically.
yy You should set the TV Sound output manually
depending on the TV version.
yy If you control TV volume when this unit and
TV are connected by LG Sound Sync, this unit
may louder the volume due to synchronizing
volume with TV’s.
3
Operating
Refer to the TV’s instruction manual for the details of
LG Sound Sync.
38 Operating
WIRELESS PARTY LINK
Connection
The output sound of (MAIN) unit is expanded to
(OTHER) unit.
It is compatible with unit that supports WIRELESS
PARTY LINK.
The name of function about sound expansion
between the compatible products wirelessly was
changed to PARTY LINK or WIRELESS PARTY LINK.
3
,,Note
yy If you using the LG Sound Sync, this function
is not available. If you connect the LG TV
function, “NOT SUPPORT” appears in the
display window.
yy You can use microphone in the OTHER unit
only. In case of OTHER unit, some functions
are supported only.
yy When WIRELESS PARTY LINK is
disconnected, OTHER unit is changed to BT
(Bluetooth) function.
Operating
yy If the connection is failed, “FAILED” appears in
the display window.
yy Mute function is synchronized with each
other.
yy WIRELESS PARTY LINK connection will be
disconnected when you turn off the unit or
press 3 WIRELESS LINK on the unit.
yy Sound of MAIN unit and OTHER unit may be
different depending on playback status or
source.
yy Check the following information when
connecting to Bluetooth.
1. Press 3 WIRELESS LINK on the unit.
PARTY LINK MODE SELECT appears in the display
window.
2. Press 3 WIRELESS LINK on the unit to select
MAIN or OTHER.
- unit : Selects MAIN.
-
unit : Selects OTHER.
Two units try to connect with each other.
3. When these units are successfully connected
each other, each of connected device names
appears in the each unit.
-- You can connect only one Bluetooth device
in the MAIN unit. You cannot connect
Bluetooth device to the OTHER unit.
-- WIRELESS PARTY LINK connection is only
supported on Android devices. (WIRELESS
PARTY LINK connection may not be
supported depending on the connected
device specifications or OS.)
-- Removable/detachable Bluetooth devices
(ex. Dongle etc.) will not support WIRELESS
PARTY LINK connection.
-- When WIRELESS PARTY LINK is connected,
Bluetooth connection is not available in
status of recording or deleting.
-- If you connect WIRELESS PARTY LINK
while you are playing connected Bluetooth
device, it may be reconnected again,
depending on phone specification.
yy MAIN / OTHER are may be displayed to
MASTER (Primary) / SLAVE (Secondary) in
the existing products.
Troubleshooting 39
Troubleshooting
General
Problem
Cause & Solution
yy Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn them on again.
The unit does not work
properly
yy Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
yy Previous setting may not be saved when device power is shut off.
No Power
No sound
yy Check whether you select right function.
Press function button and check the selected function.
yy Check to see if the speakers are connected correctly. Speaker cables connected
correctly.
yy An unplayable disc is inserted. Check the playable disc.
yy No disc is inserted. Insert a disc.
yy The disc is dirty. Clean the disc. (Page 43)
yy The disc is inserted upside down.
Place the disc with the label or printed side facing upwards.
yy The antenna is positioned or connected poorly.
Connect the antenna securely.
Radio stations cannot be
tuned in properly
yy The signal strength of the radio station is too weak.
Tune to the station manually.
yy No stations have been preset or preset stations have been cleared (when tuning
by scanning preset channels).
Preset some radio stations, see page 25 for details.
4
Troubleshooting
The unit does not start
playback
yy The power cord is not plugged in. Plug in the power cord.
yy Check whether electricity failed.
Check the condition by operating other electronic devices.
40 Troubleshooting
Problem
Cause & Solution
yy The remote control is too far from the unit.
Operate the remote control within about 7 m (23 feet).
The remote control does yy There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
not work properly
yy The batteries in the remote control are exhausted.
Replace the batteries with new ones.
No speaker light
LG Sound Sync does not
work
4
yy Check whether the speaker light cables are connected to the unit correctly.
Connect the speaker light cables to the unit correctly.
yy Check the speaker light effects by pressing LIGHTING on the unit. (Page 33)
yy Check whether your LG TV supports LG Sound Sync.
yy Check connection of LG Sound Sync.
yy Check sound setting of your TV and this unit.
Troubleshooting
Appendix 41
General specifications
General
Power requirements
Refer to the main label on the unit.
Power consumption
Refer to the main label on the unit.
Dimensions (W x H x D)
Approx. 350 mm x 166 mm x 276 mm
Operating temperature
5 °C to 35 °C
Operating humidity
60 %
Inputs
Analog audio in (AUX IN)
2.0 Vrms (1 kHz, 0 dB), 75 Ω, RCA jack (L, R)
Portable in (PORTABLE IN)
1.0 Vrms (3.5 mm stereo jack) x 1
Microphone (MIC)
Sensitivity 20 mV (1 kHz), 6.3 mm jack x 1
Tuner
FM Tuning Range
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
AM Tuning Range
522 to 1,620 kHz, 520 to 1,710 kHz or 522 to 1,710 kHz
System
Frequency Response
40 to 20,000 Hz
5
Signal-to-noise ratio
More than 75 dB
Dynamic range
More than 75 dB
Bus Power Supply (USB)
5 V 0 500 mA
Appendix
Amplifier (RMS Output power)
Total output
1,100 W RMS
Front
350 W RMS X 2 (4 Ω at 1 kHz, 25 % THD)
Subwoofer
400 W RMS (3 Ω at 60 Hz, 25 % THD)
yy Design and specifications are subject to change without notice.
42 Appendix
Speakers specifications
Front speaker
Type
2 Way 2 Speaker
Impedance
4Ω
Rated Input Power
350 W RMS
Max. Input power
700 W RMS
Dimensions (W x H x D)
Approx. 300 mm x 363 mm x 253 mm
Subwoofer speaker
Type
1 Way 1 Speaker
Impedance
3Ω
Rated Input Power
400 W RMS
Max. Input power
800 W RMS
Dimensions (W x H x D)
Approx. 310 mm x 363 mm x 253 mm
yy Design and specifications are subject to change without notice.
Trademarks and Licenses
5
Appendix
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of
such marks by LG Electronics is under license.
Other trademarks and trade names are those of their respective owners.
Appendix 43
Maintenance
Handling the Unit
When shipping the unit
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
Storing Discs
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally
packed at the factory.
Keeping the exterior surfaces clean
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Do not use volatile liquids such as insecticide spray
near the unit. Wiping with strong pressure may
damage the surface. Do not leave rubber or plastic
products in contact with the unit for a long period of
time.
Cleaning Discs
Cleaning the unit
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not use
strong solvents such as alcohol, benzine, or thinner,
as these might damage the surface of the unit.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for old vinyl records.
Maintaining the Unit
5
Appendix
The unit is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn, the
picture quality could be diminished. For details, please
contact your nearest authorized service center.