LG XC102, XC102-A0U Owner's manual

LG XC102, XC102-A0U Owner's manual
LGECB_XC102_ENG_MFL38289124
ENGLISH
MODEL : XC102 (XC102-A0U, XCS102F)
There is so much your Hi-Fi system can do
Lull me to sleep
and wake me up
Go to pages 5 & 9
Contents
Setting up
3
About Player
4
About Remote control
5
Listening to CDs
6
Connecting your portable USB player
6
Listening to the radio
7
Listening to music from your portable player 8
About MP3/WMA
8
USER EQ
9
Setting the Clock
9
Use your player as an alarm clock
9
Safety Precaution
10
Troubleshooting
11
Specifications
11
Play CDs
Go to page 6
Play from many
external devices
Go to page 8
Vinyl deck
Portable CD player
Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.
2
MICRO Hi-Fi SYSTEM ] USER GUIDE
MP3 player
ENGLISH
Setting up
1 Connect the speaker cables to the player
Cables from the left-hand speaker connect to the terminal marked L
(left) + (plus) and - (minus). Cables from the right-hand speaker are
connected to the terminal marked R (right) + (plus) and - (minus).
To connect the cable to the player, press each of the four square
plastic finger pads on the rear of the player. The connector will open
ready to receive a cable.
3
#
Put the battery in the remote control
Make sure that the + (plus) and - (minus)
on the battery (size AAA) match those on
the remote control.
2 Fit the AM loop aerial to its stand
Connect the AM loop aerial to the player.
3 Connect the FM aerial
The reception will be at its best when the two
loose ends of the aerial are in a straight line
and horizontal.
4 Plug the power plug into a wall
socket
Connect an auxiliary device
Connect an auxiliary device such as a TV or
VCR via the rear mounted AUX connector and
press AUX on the front panel or FUNCTION on
the remote control repeatedly to select AUX.
MICRO Hi-Fi SYSTEM ] USER GUIDE
3
About Player
1/]] (POWER)
You can set up the unit into an economic
power save mode. In the power-on status,
press and hold 1/] for about 3 seconds.
To cancel power save mode, press 1/].
VOLUME
Control the volume when using any function.
eXtreme Dynamic Sound System
Reinforce the treble, bass and surround sound
effect. XDSS ON will show in the display. Press
again for NORMAL.
MP3 Optimizer
Optimizes compressible MP3 files so that it
improves the bass sound.
(XDSS ON → MP3--OPT ON → NORMAL)
Headphone jack
Connect a headphone plug ( 3.5 mm) into the
jack to listen to the sound through headphones.
Connecting headphones (not supplied) will
switch off the speakers.
ST.MONO
This will change the tuner from stereo to mono
and usually improve the reception.
PROG.
If you have saved radio stations using
PROG., you can scroll through them and
select one. (see Listening to the radio)
Listen to your tracks in any order
(see Listening to the CDs)
AUX or PORTABLE
You can select AUX or PORTABLE by
pressing the button.
USB connector
Connect a remote USB compatible player
here.
PORT.IN
For connecting a portable device and playing it
through the system’s speakers.
Press DEMO in power off state to demonstrate
the function on display window. Press again to
cancel.
SET/RDS (OPTIONAL)
SET confirms the time you have selected when
setting the clock. (see Setting the clock) RDS
shows information about radio stations. (see
Listening to the radio)
TIMER
With the TIMER function you can turn CD play
and radio reception on or off at a desired time.
(see Use your player as an alarm clock)
CLOCK
For setting the clock and checking the time.
(see Setting the Clock)
DEMO
4
MICRO Hi-Fi SYSTEM ] USER GUIDE
About Remote control
CLOCK
For setting the clock and checking the time.
(see Setting the Clock)
Search for a folder of MP3/WMA files
When a CD containing MP3/WMA files in
several folders is being played, press
PRESET/FOLDER to select the folder you
want to play.
Choose a ‘preset number’ for a radio
station (see Listening to the radio)
Moving to other cards
In case that more than two memory cards are
connected to the USB port, press D.SKIP to
select a card you want to use.
For storing radio stations
If you have saved radio stations using
PROGRAM/MEMO, you can scroll through
them and select one. (see Listening to the
radio)
Listen to your tracks in any order
(see Listening to the CDs)
Optimise the sound
The function creates the optimum sound for
you to play of the original sound. Each time
you press XTS Pro, “XTS -- PRO ON” or
“XTS -- PRO OFF” is displayed in turn. (The
XTS Pro function will not be operated when a headphone has been connected.)
Dimm the display light
Temporarily stop the sound
Press the button again to return to the sound.
To change the functions
Change the functions between FM, AM, CD,
USB, AUX, PORTABLE etc.
Fall asleep while listening to your player
Firstly, start a radio station or music. Press
SLEEP one or more times to select delay
time between 10 and 180 minutes, after the
player will turn off.
Listen to your tracks again and again
Press REPEAT once to repeat the track
currently playing. Press REPEAT twice to
repeat the whole CD, or if you’re listening to
the whole folder of MP3/WMA CD.
The display will show what is being repeated.
Set the system playing CD tracks or
MP3/WMA files in a random order.
Press again to cancel.
See information about your music
MP3/WMA files often come with tags. The tag
gives the Title, Artist, Album or Time
information. Press MP3 Info while a file is
playing to see this information.
This button is not available.
Search radio stations by radio type
- OPTIONAL (See Listening to the radio)
MICRO Hi-Fi SYSTEM ] USER GUIDE
5
Listening to CDs
ON PLAYER
1. Open the CD drawer:
2. Insert the CD:
Label facing up.
3. Close the CD drawer:
The display will show the total
number of tracks (files).
4. Select the CD function:
5. Start the CD playing:
6. To stop a CD playing:
ON REMOTE
CD Z
Connecting your portable
USB player
The advantage of connecting your portable USB player through the
system’s USB port is that the portable device can be controlled from the
system. Connect the portable player to the system using a USB cable
(not supplied).
CD Z
CD
FUNCTION
B []
x
B/[]
x
Listening to CDs - more you can do
Pause or restart a CD
Press B [] on the front panel or B/[] on the remote control during playback.
Press this button again to resume play.
1. Select the USB function:
2. The display will show CHECKING,
followed by the number of files
displayed:
3. Press:
4. Before disconnecting the
portable USB player, change to
any other function by pressing:
5. Remove the USB player:
ON PLAYER
ON REMOTE
USB
USB
B []
CD, TUNER
or AUX
B/[]
FUNCTION
Search for a section within a track
Hold bb/BB on the front panel or .bb/BB> on the remote control
during playback. (This function is only available for Audio CD’s.)
Speed search for tracks
Hold bb/BB on the front panel or .bb/BB> on the remote control.
Track skips continuously in turn. For Audio CD, track skips continuously in
turn only on stop mode.
NOTE :
• Some portable devices are not compatible with this system.
• Do not extract the USB device in operating.
• A back up demands to prevent a data damage.
• If you use a USB extension cable or USB hub, the USB device might not
be recognized.
Press bb/BB on the front panel or .bb/BB> on the remote control.
• A device using NTFS file system is not
supported (Only the FAT (16/32) file system is supported.).
Listen to your tracks in any order
• The USB function of this unit does not support all USB devices.
Up to 20 tracks on a CD can be listened to in the order of your choice.
Insert a CD and wait for it to be read. Press PROG. on the front panel or
PROGRAM/MEMO on the remote control, then use bb/BB on the front
panel or .bb/BB> on the remote control to select the track. Press
PROG. or PROGRAM/MEMO again to save and select the next track.
Press B[] or B/[] . To clear your selection, press x , PROG.
(or PROGRAM/MEMO), x .
• Digital camera and mobile phones are not
supported.
• This unit is not supported when the total
number of files is 1000 or more.
Skip to another track
6
MICRO Hi-Fi SYSTEM ] USER GUIDE
See information about your radio stations - OPTIONAL
Listening to the radio
Make sure both the FM and AM aerials are connected.
1. Select either FM or AM:
2. Select the radio station:
3. To ‘save’ a radio station:
A preset number will show in the
display.
4. To select a ‘saved’ station:
5. To confirm press:
Up to 50 radio stations can be
saved.
ON PLAYER
ON REMOTE
TUNER
TUNE.-/ TUNE.+
PROG.
FUNCTION
TUN.-/ TUN.+
PROGRAM/MEMO
PROG.
PRESET/FOLDER
PROGRAM/MEMO
The FM tuner is supplied with the Radio Data System (RDS) facility. This
shows the letters RDS on the display, plus information about the radio station being listened to. Press RDS several times to view the information.
PTY - Programme Type, such as News, Sport, Jazz Music.
RT - Radio Text, the name of the radio station.
CT - Time Control, the time at the location of the radio station.
PS - Programme Service name, the name of channel.
You can search the radio stations by programme type by pressing PTY.
The display will show the last PTY in use. Press PTY one or more times to
select your preferred programme type. Press and hold PTY SEARCH. The
tuner will search automatically. When a station is found the search will stop.
Listening to the radio - more you can do
Look for radio stations automatically
Press TUNE.-/TUNE.+ on the front panel (or press TUN.- /TUN.+ on the
remote control) for more than 0.5 second. The tuner will scan automatically
and stop when it finds a radio station.
Delete all the saved stations
Press and hold PROG. or PROGRAM/MEMO for two seconds. “ERASE
ALL” shows. Press PROG. or PROGRAM/MEMO to erase all the saved stations.
Choose a ‘preset number’ for a radio station
Select a station you want by pressing TUNE.-/TUNE.+ on the front panel or
TUN.- /TUN.+ on the remote control. Press PROG. or PROGRAM/MEMO,
the station flashes. Press PRESET/FOLDER on the remote control to
select the preset number you want. Press PROG. or PROGRAM/MEMO to
save it.
Improve poor FM reception
Press ST./MONO on the front panel. This will change the tuner from stereo
to mono and usually improve the reception.
MICRO Hi-Fi SYSTEM ] USER GUIDE
7
About MP3/WMA
Listening to music from
your portable player
The player can be used to play the music from many types of portable
player.
1. Connect the portable player by
plugging the unit into PORT. IN on
the front of the player.
2. Turn the power on:
3. Select the PORTABLE function:
4. Turn the portable player on and
start it playing:
8
MICRO Hi-Fi SYSTEM ] USER GUIDE
ON PLAYER
ON REMOTE
1 /]]
AUX
POWER
FUNCTION
MP3/WMA Disc compatibility with this unit is limited as follows:
• Sampling Frequency : 8 - 48 kHz (MP3), 32 - 48 kHz (WMA)
• Bit rate : 8 - 320 kbps (MP3), 48 - 320 kbps (WMA)
• CD-R physical format should be “ISO 9660”
• If you record MP3/WMA files using the software which cannot create a
FILE SYSTEM, for example “Direct-CD” etc., it is impossible to playback
MP3 files. We recommend that you use “Easy-CD Creator”, which creates
an ISO 9660 file system.
• File names should be named using 30 letters or less and must incorporate “.mp3”,“.wma” extension e.g. “********.MP3” or “********.WMA”
• Do not use special letters such as “/ : * ? “ < >”etc.
• Even if the total number of files on the disc has more than 1000, it will
only be shown up to 999.
Use your player as an alarm clock
USER EQ
You can listen to music with the desired sound effect (BASS, MIDDLE
and TREBLE).
1. Select a “USER EQ”:
2. When “USER EQ” is displayed,
press:
3. Select the sound effect you want
among BASS, MIDDLE or TREBLE:
4. Adjust sound level (MIN, -4 to
+4, MAX):
5. Repeat the steps from 3 to 4 to
set other sound effect:
6. Press:
ON PLAYER
ON REMOTE
EQ Master
SET
EQ master
B[]
or
x
bb or BB
SET
Setting the Clock
1. Turn the power on:
2. Press for at least 2 seconds:
3. Choose from either: AM 12:00
(for an am and pm display) or 0:00
(for a 24 hour display).
4. Confirm your selection:
5. Select the hours:
6. Press:
7. Select the minutes:
8. Press:
ON PLAYER
ON REMOTE
1 /]]
CLOCK
POWER
CLOCK
Press and hold TIMER for two seconds. Each function, TUNER, CD, USB,
flashes for two seconds. Press SET when the function you want to be
woken by is showing.
If you choose TUNER you will be shown the stations you have saved as
presets. Use bb or BB to select the station you want, then press SET.
You will be shown the ON TIME display. This is where you set the time you
want the alarm to go off. Use bb or BB to change the hours and minutes
and SET to save.
You will then be shown the OFF TIME display. This is where you set the
time you want the function to stop. Use bb or BB to change the hours and
minutes and press SET to save.
Next you will be shown the volume (VOL) you want to be woken by.
Use bb or BB to change the volume and SET to save. Switch the system
off. The clock icon shows that the alarm is set.
When the system is turned off you can check the time the alarm is set for
by pressing TIMER. You can also turn the alarm on and off by pressing
TIMER. To set the alarm to go off at a different time, switch the system on
and reprogramme following the same steps as initially.
bb or BB
SET
bb or BB
SET
bb or BB
SET
MICRO Hi-Fi SYSTEM ] USER GUIDE
9
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book case or
similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from over heating.
The openings should be never be blocked by placing the product on a bed, sofa, rug
or other similar surface. This product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction has been adhered to.
CAUTION:
This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and
retain it for future reference. Should the unit require maintenance, contact an authorized service center.
Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.
10
MICRO Hi-Fi SYSTEM ] USER GUIDE
CAUTION: The apparatus should not be exposed to water (dripping or splashing) and
no objects filled with liquids, such as vases, should be placed on the apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional
outlets or branch circuits. Check the specification page of this owner's manual to be
certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord plug. When installing the
product, ensure that the plug is easily accessible.
Troubleshooting
Symptom
No power.
No sound.
The unit does
not start
playback.
Specifications
Cause
• The power cord is disconnected.
• The power of the external source
equipment is turned off.
• The speaker cable is connected to
a wrong position.
• An unplayable disc is inserted.
• The disc is placed upside down.
Correction
• Plug the power cord into the wall
outlet securely.
• Switch on the external source
equipment.
• Set the speaker cable to the correct position, then turn on the unit
again by pressing POWER.
• Insert a playable disc.
• Place the disc with the playback
side down.
• Place the disc on the disc tray
correctly inside the guide.
• Clean the disc.
• Point the remote control at the
remote sensor of the unit.
• Operate the remote control within
about 23 ft (7 m).
• Remove the obstacle.
• The disc is not placed within the
guide.
• The disc is dirty.
• The remote control is not pointed
at the remote sensor of the unit.
• The remote control is too far from
The remote
the unit.
control does not
•
There
is an obstacle in the path of
work properly.
the remote control and the unit.
• The battery in the remote control is • Replace the battery with new one.
exhausted.
General
Net Weight
3.0 kg
External dimensions (WxHxD) 174 x 245 x 278 mm
Tuner
FM Tuning Range
AM Tuning Range
87.5 - 108.0 MHz or 65 - 74 MHz,
87.5 - 108.0 MHz
522 - 1620 kHz or 520 - 1720 kHz
Amplifier
Output Power
T.H.D
Frequency Response
Signal-to-noise ratio
50 W + 50 W
0.5 %
40 - 20000 Hz
75 dB
CD
Frequency response
Signal-to-noise ratio
Dynamic range
40 - 20000 Hz
75 dB
75 dB
Speakers (XCS102F)
Type
Impedance
Frequency Response
Sound Pressure Level
Rated Input Power
Max. Input Power
Net Dimensions (WxHxD)
Net Weight (1EA)
2 Way 2 Speaker
4Ω
80 - 20000 Hz
82 dB/W (1m)
50 W
100 W
160 x 243 x 174 mm
2.02 kg
Designs and specifications are subject to change without notice.
MICRO Hi-Fi SYSTEM ] USER GUIDE
11
P/NO : MFL38289124
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement