LG DR-4912M, DR4912MVL Owner's manual

LG DR-4912M, DR4912MVL Owner's manual
DR4912MVL_AA1PLL_ENG
DVD RECORDER
OWNER'S MANUAL
MODEL
:
DR-4912M
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
Safety
Precautions
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
as
placed
on
the
apparatus.
equipment may generate or use
Changes or modifications to this
radio
frequency energy.
equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The
user could lose the authority to operate this equipment if an
unauthorized change or modification is made.
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
vases, should be
FCC WARNING: This
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
REGULATORY INFORMATION: FCC Part 15
This
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
to constitute
magnitude
risk of electric
a
shock to persons.
The exclamation
a
has been tested and found to
Class B
installed and used in accordance with the instruction
point
is intended to alert the
important operating
within
user
an
equilateral triangle
to the presence of
may
cause
no
guarantee that interference will
(servicing)
accompanying the
WARNING: TO REDUCE THE RISK OF FIRE OR ELEC-
SHOCK, DO NOT EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.
a
particular
receiver.
EVITER
LES CHOC
product
into
an
outlet
on a
circuit different
from that to which the receiver is connected.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Consult the dealer
for
ELECTRIQUES,
or an
experienced
radio/TV technician
help.
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
SERIAL NUMBER: The serial number is found
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET
this unit. This number is for this unit
POUSSER JUSQU'AU FOND.
the serial number in the space
as a permanent record of your
WARNING: Do not install this
as a
bookcase
or
equipment
in
a
confined space
similar unit.
NOTE TO CABLE/TV INSTALLER: This reminder is
call the cable TV
system installer's attention
the National Electric Code
(U.S.A.).
provided
to
to Article 820-40 of
The code
provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building,
as
close to the
point
of the cable
entry
as
practical.
CAUTION:
This DVD Recorder
To
employs
a
Laser
System.
proper
product, please read this owner 's
carefully and retain for future reference. Should the
require maintenance, contact an authorized service
ensure
use
of this
manual
unit
center.
Use of
controls, adjustments,
dures other than those
or
specified
the
performance of proceherein may result in haz-
ardous radiation exposure.
To
prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
2
occur
installation. If this
Connect the
such
not
product does cause harmful
interference to radio or television reception, which can be
determined by turning the product off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the product and
product.
ATTENTION: POUR
manual,
harmful interference to radio communications.
However, there is
in
and maintenance
instructions in the literature
TRIC
comply with the
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the product is
operated in a residential installation. This product generates,
uses, and can radiate radio frequency energy and, if not
product
limits for
Model No.
Serial No.
on
the back of
only. You should record
provided and retain this guide
purchase.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER'S MANUAL.
CAUTION:
AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE REFERENCE.
This
has been
designed and manufactured to assure personal safety. Improper use can result in electric
safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
product
shock
fire hazard. The
or
DO NOT REMOVE THE CABINET
COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions.
All these
-
safety
instructions should be read before the
ating
operated.
and operis
product
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles,
product.
and the
point
where
they
exit from
the
2.
these instructions.
Keep
use
The
-
safety, operating
and
instructions should be retained for future refer-
11.
Only
use
attachments/accessories
specified by
the manufacturer.
ence.
3. Heed all
warnings. All warnings on the product and
operating instructions should be adhered to.
in the
-
4. Follow all
instructions.
All
-
and
operating
use
instructions should be followed.
5. Do not use this
near a
in
bath
tub,
basement;
wet
a
other
product
wash
areas
located
near
bowl,
or
near
near
water.
kitchen
a
--
For
example:
sink, laundry tub,
swimming pool;
and
water.
12. Use
only with the cart, stand, tripod, bracket, or
specified by the manufacturer, or sold with
table
6. Clean
only with dry
the wall
Unplug this product from
cleaning. Do not use liquid
cloth.
outlet before
apparatus. When
--
when
cleaners.
avoid
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
-
Slots and
openings
ventilation
and to
are provided for
operation of the
product and to protect it from over- heating. The openings should never be blocked by placing the product
on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such
as a
reliable
or
or rack unless proper ventilation is prothe manufacturer's instructions have been
adhered to.
8. Do not install
near
any heat
sources
ators, heat registers, stoves,
(including amplifiers)
9.
such
as
cart
is used, use caution
combination to
Unplug
this
product during lightning storms
long periods of time.
or
when unused for
in the cabinet
ensure
bookcase
vided
13.
a
moving the cart/product
injury from tip-over.
14. Refer all
servicing to qualified service personnel.
Servicing is required when the product has been
damaged in any way, such as power-supply cord
or plug is damaged, liquid has
been spilled or
objects have fallen into the product, the product
has been exposed to rain or moisture, does not
operate normally, or has been dropped.
radi-
other apparatus
that produce heat.
or
Do not defeat the
safety purpose of the polarized
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
or
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
3
INTRODUC
Table of Contents
INTRODUCTION
DVR HOOKUP
SafetyPrecautions.......................2
IMPORTANT SAFETY INSTRUCTIONS
.
.
.
.
.
.
.
3
TableofContents......................4-5
DVDRecorderOverview................6-11
RecordableDiscs.......................6
PlayableDiscs.........................6
Disc-relatedterms......................7
?TypesofvideoCDs..................7
AboutSymbols.........................7
?Aboutthesymboldisplay............7
About the disc symbols for instructions
7
?
AboutDVD-RandDVD-RWdiscs.
.
.
.
.
.
.
.
.
.
.
.
.
?Whatare'recordingmodes'?.
Is editing a DVD like editing a video tape?
About word 'Original' and 'Playlist'
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.8
.8
.
?
.
.
.
8
8
.8
AboutDVDrecording..................9-10
Disc types and recording formats, modes,
andsettings........................9
?Notesforrecording...................9
Restrictions on video recording.
10
?
?
.
.
.
.
.
.
.
.
?Whatis'CPRM'?...................10
?Copyright.........................10
.10
RemoteControlOperatingRange.
Remote Control Battery Installation
10
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Connecting
Antenna/
CableTVtoDVDRecorder...............16
TVConnections.......................17
AmplifierConnections...................18
Accessory Audio/Video (A/V) Connections
toDVDRecorder......................19
DigitalCamcorderConnections.
.
.
.
.
.
.
.
.
.
.
.19
DVR SETUP
.
?
AboutDVD+RandDVD+RWdiscs.
Connections........................16-19
.
ResettheDVDRecorder................10
Precautions...........................11
?Handlingtheunit...................11
?Cleaningtheunit...................11
NotesonDiscs........................11
?Handlingdiscs.....................11
?Storingdiscs.......................11
?Cleaningdiscs.....................11
FrontPanel............................12
FunctionDisplayWindow................13
RemoteControlOverview................14
RearPanel............................15
Pre-operationSetup..................20-28
.20
MenuOverviewandOperation.
GeneralOperation.....................20
.
.
.
.
.
.
.
.
.
.
General...........................20-23
?T uningBandSelect.................20
?EZChannelScan...................20
?To Add
or
Erase Channels from
Memory
.
21
?ClockSet.........................21
?TVAspect........................22
?DisplayMode......................22
?ProgressiveScan...................22
?PBC.(On/Off)......................23
?FactorySet.......................23
Language............................23
?DisplayLanguage..................23
?DiscLanguage.....................23
Audio...............................24
?DolbyDigital.......................24
?DTS.............................24
?MPEG...........................24
?SamplingFrequency................24
.24
DRC(DynamicRangeControl).
?
.
.
.
.
.
.
.
?Vocal............................24
Lock(ParentalControl)...............25-26
?SetPassword......................25
?Rating...........................25
?CountryCode......................26
Recording.........................26-27
?RecordModeSet...................26
?RecordAspect.....................26
?DVRecAudio.....................27
?AutoChapter......................27
Disc..............................27-28
?DiscFormat.......................27
?DiscProtect.......................27
?Finalize..........................28
?DiscLabel........................28
General
?
Explanation of On-Screen Display. 29-31
Displaying Information While Watching TV 29
Displaying Disc Information on-screen 29-31
.
?
.
4
.
Table of Contents
PLAYBACK
RecordingfromExternalInput.
RecordingfromExternalDevices
Recording from a Digital Camcorder
.
.32-35
DVDandVideoCDOperation.
DVDorVideoCDPlayback..............32
.
.
.
.
.
.
.
.
.
GeneralFeatures......................32
?SelectingTITLEs...................32
.32
SelectingCHAPTER/TRACKs
?
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.42-43
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.42
.
42
WhatisDV?..........................43
?DV -RelatedMessages...............43
?T roubleshooting....................43
?Search...........................32
?
Still Picture and
Frame-by-Frame Playback
.
32
?SlowMotion.......................33
?Random..........................33
?Repeat..........................33
?RepeatA-B.......................33
?T imeSearch.......................33
?Zoom............................34
?MarkerSearch....................34
?
Checking
the contents of
EDITING
.44-48
TitleListandChapterListMenu
Using the Title List-Original menu VR ......44
Using the Chapter List-Original menu VR ...44
Using the Title List-Playlist menu VR ......45
Using the Chapter List-Playlist menu VR ...45
Using the Title List menu Video ............46
?DeletingaTitle.....................46
If the disc has already been finalized
46
Using the Title List menu +RW ............47
Using the Chapter List menu +RW .........47
Using the Title List menu +R ............48
Using the Chapter List menu +R .........48
.49-55
TitleandChapterEditing.
Titles,ChaptersandParts................49
AddingChapterMarkers.................49
ChangingTitleThumbnails...............49
MakingaNewPlaylist...................50
Adding Additional Title/Chapters to the Playlist 50
DeletingaTitle/Chapter.................51
DeletingaPart........................51
.52
Undoing/RedoingtheLastDelete.
NamingaTitle........................52
.53
CombiningTwoChaptersIntoOne.
MovingaPlaylistChapter................53
.
.
.
.
.
.
.
?
DVDVideodiscs:Menus.............34
?T itleMenu........................34
?DiscMenu........................34
?CameraAngle.....................34
.34
ChangingtheAudioSoundtrack.
.35
?ChangingtheAudioChannel.
?
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?3DSurround......................35
?Subtitles..........................35
?InstantSkip.......................35
.35
?FindingLocationsonaDisc.
?LastConditionMemory...............35
?PIP(Picture-in-Picture)...............35
.36-37
AudioCDandMP3Operation.
.36
AudioCDorMP3DiscPlayback.
Musicmenuoptions....................36
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?Pause...........................37
?ChangingTracks...................37
.37
RepeatTrack/All(Folder)/Off.
?
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ProtectaTitle.........................54
HideaTitle/Chapter....................54
?Random..........................37
DivideOneTitleIntoTwo................55
?3DSurround......................37
AdditionalInformation...................56
.37
Clean-upRecording....................56
OverwriteRecording....................56
Viewing Title List menu displayed on other
DVDRecordersorPlayers...............56
Playing your recordings on other
.56
DVDplayers(FinalizingaDisc).
?ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
?Search...........................37
?RepeatA-B.......................37
NotesonMP3Recordings..............37
38
Audio CD and MP3 Programmed Playback.
JPEGFileOperation....................39
.39
ViewingJPEGFilesonaDisc.
?SkipImage........................39
?RotateImages.....................39
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?V iewSlideShows...................39
?NotesorJPEGFiles.................39
REFERENCE
LanguageCodeList.....................57
CountryCodeList......................58
Controlling Your TV with the Supplied Remote 59
Troubleshooting.....................60-61
Specifications.........................62
.
RECORDING
BasicRecording........................40
.40
BasicRecordingfromTVchannels.
InstantTimerRecording.................40
TimerRecording.......................41
41
Checking Timer Recording Details
.41
CancelingaTimerRecording.
41
Stopping a Timer Recording in Progress
Timer Recording Troubleshooting
41
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
About the
symbols
Indicates hazards
itself
or
for instructions
likely to cause
damage.
harm to the unit
other material
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
5
INTRODUC
DVD Recorder Overview
Recordable Discs
DVD-RW
(Digital
These Discs
Recordings
record again
DVD-R
on
(Digital
These Discs
Video Disc
-
be recorded
can
can
be
erased, then you
the same Disc.
Video Disc
-
be recorded
can
DVD+RW
(Digital
can
Video Disc
be recorded
Recordings can be erased,
again on the same Disc.
DVD
ReWritable):
repeatedly.
(8
on
+
disc)
(VCD)
(8cm/12cmdisc)
can
Audio CD
(8
cm/12
cm
disc)
In
ReWritable):
repeatedly.
then you
cm
Video CD
Recordable):
only once.
on
cm/12
can
After you finalize a DVD-R, you cannot
record on it or edit it.
These Discs
Discs
Playable
record
addition, this unit can play DVD-R/DVD-RW discs;
discs; CD-R/CD-RW discs that
contain audio titles, MP3 files, or JPEG files; SVCD;
DVD+R/DVD+RW
and kodak
picture
CDs.
otes
DVD+R
(Digital
These Discs
can
Video Disc
+
be recorded
Recordable):
only once.
--
ment
After you finalize a DVD+R, you cannot
record on it or edit it any more.
--
DVD-R/RW,
ed
--
using
a
or
CD-RW discs.
--
personal computer
or a
DVD
or
the conditions of the
recording equip(or DVD±R/±RW) disc itself,
(or DVD±R/±RW) discs cannot be
on
the unit.
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
use irregularly shaped CDs (e.g., heart-shaped
octagonal). Doing so may result in malfunctions.
CD
Regional
code of the DVD Recorder and DVDs
Recorder may not play if the disc is damaged or dirty,
or if there is dirt or condensation on the Recorder's
This DVD Recorder is
lens.
tured for
If you record a disc
if it is recorded in a
cases
of the
in which it
(the
Do not
or
DVD+R/RW and CD-R/RW discs record-
on
the CD-R/RW
CD-R/RW
played
otes
This Recorder cannot record CD-R
or
some
--
--
Depending
using a personal computer, even
compatible format, there are
may not play because of the settings
application software used to create the disc.
(Check with the software publisher for more detailed
information.)
4
designed and manufacplayback of Region 4 encoded DVD
software. The region code on the labels of some
DVD
discs indicates which
type of DVD Recorder
play
those discs. This unit
can
play only
can
DVD discs labeled 4
ALL. If you try to play any other discs, the message
"Incorrect region code. Can't play back" will appear on
or
the TV
screen.
code label
area
Some DVD discs may not have a region
though their playback is prohibited by
even
limits.
otes
on
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
be
may
intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
other functions may be added.
Refer also to the instructions supplied with the DVDs
or
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
6
DVD Recorder Overview
(Continued)
Disc-related terms
Title
About
(DVD only)
About the
The main film content,
or music album.
Each title is
assigned
locate it easily.
you to
Symbols
accompanying
feature content,
"
a
title reference number
enabling
symbol display
"
may appear on the TV
This icon means the function
manual is not available
during operation.
explained in this owner's
that specific disc, or at that
on
screen
time.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number to
enable you to locate the chapter you want. Depending
on the disc, chapters may not be labeled.
Track
(Video
CD and Audio CD
only)
Sections of a picture or a musical piece on a Video CD
or an Audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
Scene
On
Video CD with PBC
(Playback control) functions,
moving pictures and still pictures are divided into sections called "Scenes". Each scene available is displayed
on the Scene menu and assigned a scene number,
enabling you to locate the scene you want.
A scene may be composed of one or several tracks.
a
Types
There
of Video CDs
are
two
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
Video CDs
PBC
system via
tion still
pictures
symbols
A section whose title has
applicable only
symbol.
are
Many
ent
for instructions
one
of the
to those discs
functions
on
the
provided on this
recording mode. One
following symbols
represented by the
Recorder
or more
are
dependsymbols
by each
of the
VR
+R
+RW ) appear
Video
(,
(explained in this manual) so that you can see
at a glance whether it's applicable to the disc loaded.
,
,
function
Video
DVD-R/RW with Video
VR
DVD-RW with VR
+R
DVD+R disc
+RW
DVD+RW disc
DVD
DVD-Video disc
VCD
Video CDs
CD
Audio CDs
MP3
types of Video CDs:
with the
About the disc
JPEG
recording
recording
mode
mode
MP3 CDs
JPEG CDs
The finalized DVD disc is
a
DVD-Video disc
menus, search
functions, or other
typical computer-like operations. Moreover, high resolucan
be
played
if
they
are
included
on
the disc.
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Video CDs not
7
INTRODUC
DVD Recorder Overview
(Continued)
Is
About DVD-R and DVD-RW discs
How
are
DVD-R and DVD-RW discs different?
The essential difference between DVD-R and DVD-RW
is that DVD-R is
is
a
record-once
a
medium, while DVD-RW
re-recordable/erasable medium. You
erase a
DVD-RW disc
can
approximately 1,000
re-record/
times.
Can I
play my recordable discs in a regular DVD
player?
Generally, DVD-R discs and DVD-RW discs recorded in
Video mode are playable in a regular DVD player, but
they must be 'finalized' first. This process fixes the conDVD-Video discs.
as
are
in
playable
some
Video
are
There
are
a product feature that is capaDVD-RW discs recorded with
playing
Recording
format.
a
DVD-R
recording
About word
'Original'
Video mode
can
this
using
recording
are
always
be formatted for VR mode
recording
the edited version.
?
content refers to what's
Original:
on
recording
picture quality/recording time settings
able (HQ, SQ, LQ, EQ)
Not playable on regular DVD players
Recordings can be extensively edited
Playlist:
disc
recording
?4different picture quality/recording time settings available (HQ, SQ, LQ, EQ)
Playable on regular DVD players (after finalization)
Limited editing features
?
How
content refers to the edited version of the
how the
---
are
(Video mode)
is
a new
format for
DVD-R/RW and DVD+R/RW discs that
recording
approved by the DVD Forum in 2000. You may
therefore experience problems playing recordable DVD
discs in some players. Symptoms include video artifacts, audio and/or video dropouts and playback suddenly stopping.
Our company cannot take responsibility for problems
playing discs recorded on this Recorder in other players.
8
content is to be
played.
a
a
record-once
medium, while
re-recordable/erasable medium. You
erase a
DVD+RW disc
can
approximately 1,000
times.
DVD+RW mode
?
?
recording
picture quality/recording time settings available (HQ, SQ, LQ, EQ)
Playable on regular DVD players
The edited contents is playable on regular DVD players only after finalizing
Recordings can be edited the title/chapter
DVD+R mode
recording
picture quality/recording time settings available (HQ, SQ, LQ, EQ)
Playable on regular DVD players (after finalization)
Any edited contents are not be compatible on regular
DVD players. (Hide, chapter combine, added chapter
mark, etc.)
Limited title/chapter editing features
?4different
?
?
?
ote
was
Original
DVD+R and DVD+RW discs different?
re-record/
?
on
recorded
About DVD+R and DVD+RW discs
?
avail-
Video mode
DVD-Video Format
actually
the disc.
?4different
recording.
?4different
?
'Playlist'
in Video mode.
VR mode
?
and
Throughout this manual, you will often see the words
Original and Playlist to refer to the actual content and
DVD+RW is
modes available
disc, recordings
DVD-RW discs
or
tape?
The essential difference between DVD+R and DVD+RW
Recorder: VR mode and Video mode. When
to
video
DVD, you edit by making a 'Playlist' of what
play and when to play it. On playback, the Recorder
plays the disc according to the Playlist.
mode
'recording modes'?
two
a
edits. With
is that DVD+R is
What
editing
players.
This indicates
ble of
(Video Recording)
DVD like
to
?
DVD-RW discs recorded in VR
a
No. When you edit a video tape you need one video
deck to play the original tape and another to record the
tents of the disc to make them readable to other DVD
players
editing
DVD Recorder Overview
About DVD
(Continued)
Notes for
recording
?
The
recording
recording
Recorder
otes
?
This
This Recorder cannot make
recordings
CD-R
on
or
CD-RW discs.
?
Our company takes no responsibility for recording failure due to power outages, defective discs, or damage
to the Recorder.
?
on
?
?
Fingerprints and small scratches on a disc can affect
playback and/or recording performance. Please take
proper
Disc types and
and
?
of your discs.
care
recording formats, modes,
?
?
This Recorder
can
play
five different kinds of DVD
discs:
pre-recorded DVD-Video discs, DVD-RW, DVDR, DVD+RW and DVD+R discs. The disc format for
DVD-R discs is
"Video format"---the
always
pre-recorded
DVD-Video discs. This
finalized, you
can
play
a
DVD-R in
a
same as
means
that
regular
?
once
DVD
By default, the DVD-RW disc format is Video Recording
(VR) format, though you can change this to Video format, if required. (Reinitializing the disc will erase the
contents of the disc.)
The recording mode is closely related to the disc format. If the disc format is Video Recording format, then
the recording mode is VR mode; if the disc format is
Video mode, then the recording mode is Video mode
(except for DVD-Video, which is not recordable, and so
does not have a recording mode).
Within the recording modes (which are fixed for them
whole disc) are the record settings. These can be
changed as required for each recording and determine
the picture quality and how much space the recording
on
are
not exact because the
variable bit-rate video
that the exact
recording
compression.
depend
time will
the material
being recorded.
recording a TV broadcast, if the reception is
or the picture contains interference, the record-
When
poor
ing times may be shorter.
If you record still pictures
time may be longer.
The displayed times for
or
audio
recording
exactly
add up to
always
only,
the
recording
and time
the
remaining
length of the
The
recording time available may decrease if you
heavily edit a disc.
If using a DVD-RW disc, make sure you change the
recording format (Video mode or VR mode) before
you record anything on the disc. See page 27 (Disc
Format) for how to do this.
When using a DVD-R disc, you can keep recording
until the disc is
full, or until you finalize the disc.
Before you start a recording session, check the
amount of recording time left on the disc.
play-
er.
will take up
means
may not
disc.
settings
times shown
uses
?
When
using
DVD-RW disc in Video
a
time available will
title recorded
?
on
The Erase Title
only
increase if you
the disc.
hides the
only
option
(except
erase
the last
in the Title
title, it does
from the disc and increase
able
mode, recording
List-Original menu
actually erase the title
the recording time avail-
not
for the last recorded title
on a
DVD-RW
disc in Video
?
Overwrite
mode).
recording is
available
using
DVD+RW
discs.
the disc.
Disc type
Disc format
Recording
DVD-Video
Video format
n/a
Playback only
DVD-RW
Video
VR mode
Playback, Recording, Original/Playlist Editing
Video format
Video mode
Playback,
limited
Recording,
limited
Editing
DVD-R
Video format
Video mode
Playback,
limited
Recording,
limited
Editing
DVD+RW
+RW Video format
DVD+RW
Playback,
limited
Recording, Title/Chapter Editing
DVD+R
+R Video format
DVD+R
Playback,
limited
Recording,
format
Recording
(default)
mode
Functions
limited
Title/Chapter Editing
9
INTRODUC
DVD Recorder Overview
Restrictions
video
on
(Continued)
Remote Control
recording
copy-protected video using this
Recorder. Copy-protected video includes DVD-Video
discs and some satellite broadcasts. If copy-protected
material is encountered during a recording, recording
will pause or stop automatically and an error message
will be displayed on-screen.
?V ideo that is 'copy-once only' can only be recorded
using a DVD-RW disc in VR mode with CPRM (see
below).
Operation Range
?You cannot record
What is 'CPRM'?
CPRM is
sensor
and
press the buttons.
Remote Control
Battery
Remove the
Installation
battery
of the Remote
cover on
the
rear
Control, and insert
R03
(size AAA) batteries
matched correctly.
with
two
and
Caution
protection system (with scramble system) only allowing the recording of 'copy once' broada
Point the Remote Control at the remote
copy
cast programs. CPRM stands for Content Protection for
Do not mix old and
batteries. Never mix different
new
types of batteries (standard, alkaline, etc.).
Recordable Media.
This Recorder is CPRM
compatible,
which
means
that
record copy-once broadcast programs, but you
cannot then make a copy of those recordings. CPRM
you
can
recordings
can
only
be made
on
DVD-RW discs format-
ted in VR
mode, and CPRM recordings
played
players
on
that
are
only be
specifically compatible with
can
CPRM.
Copyright
?
?
Recording equipment should be used only for lawful
copying and you are advised to check carefully what
is lawful copying in the area in which you are making
a copy. Copying of copyright material such as films or
music is unlawful unless permitted by a legal exception or consented to by the rights owner.
This product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses
only, unless otherwise authorized by Macrovision corporation. Reverse engineering or disassembly is prohibited.
10
Resetting
the DVD Recorder
If you observe any of the
The unit is
or
following symptoms...
plugged in,
but the power will not turn
The front
panel display
is not
The DVD Recorder is not
...you
on
off.
can
working.
operating normally.
reset the DVD Recorder
as
follows:
Press and hold the POWER button for at least five
seconds. This will force the unit to power off.
Press the POWER button again to turn the unit back
on.
Unplug
the power
plug it in
and then
cord, wait
again.
at least five
seconds,
DVD Recorder Overview
(Continued)
Precautions
Notes
Handling
the unit
Handling
on
When
shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packaged at the factory.
Discs
discs
Do not touch the
disc
by
the
playback side of the disc. Hold the
edges so that fingerprints will not get on the
surface. Do not stick paper
or
tape
the disc.
on
INTRODUC
When
setting up the unit
picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
The
the unit away from the TV, VCR,
unit after removing the disc.
or
radio,
turn off the
or
Storing
After
To
keep
Do not
near
the surface clean
use
volatile
liquids,
such
as
the unit. Do not leave rubber
contact with the unit for
leave marks
on
a
insecticide spray,
or
long period
plastic products in
of time. They will
discs
playing,
as there may be a considerable
increase inside the car.
a
use a
the unit
solution. Do not
benzine,
or
lightly
use
thinner,
are
moistened with
strong
as
discs
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
soft, dry cloth. If the surfaces
soft cloth
temperature
the surface.
To clean the cabinet
Use
case.
light,
Cleaning
Cleaning
store the disc in its
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
a
extremely dirty,
detergent
mild
solvents such
these
as
might damage
ter outward.
alcohol,
the surface
of the unit.
Yes
To obtain
No
clear
picture
The DVD Recorder is a high-tech, precision device. If
the optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
vinyl
records.
11
Front Panel
POWER
Switches the DVD Recorder ON
OFF.
or
Starts
recording.
to set the
INPUT2
(VIDEO
IN/AUDIO IN
(Left/Right))
STOP
Connect the audio/video
output of an external source
(Audio system, TV/ Monitor, VCR, Camcorder, etc.).
Display
Pause
window
Shows the current status of the
REC (z)
repeatedly
recording time.
Press
Stops playback
or
(x)
recording.
PAUSE (X)
playback or recording temporarily,
press again to exit pause mode.
DVD Recorder.
PLAY
To
INPUT 2
a
(N)
disc.
(S-VIDEO IN)
Connect the S-Video
external
back
play
output of
an
(TV/ Monitor, VCR,
Camcorder, etc.).
source
OPEN/CLOSE
Opens
DV INPUT
closes the disc
(Z)
tray.
Power indicator
Connect the DV
output of
or
a
Lights up red when
the Recorder is in
digital
camcorder.
standby
Disc
Insert
mode.
Tray
disc here.
a
CHANNEL
(v / V)
Scans up or down through
memorized channels.
m/.
Go to
beginning
of current
chapter/
Press and hold for two seconds for
a
track
fast
or
to
reverse
previous chapter/track.
search during playback.
>/M
Go to NEXT
Press and hold for two seconds for
a
fast forward search
chapter/track.
during playback.
Remote Sensor
Point the DVD Recorder Remote Control here.
12
Function
Display
Window
REC The Recorder is
Disc type indicators
Indicates the type of disc loaded.
recording.
Indicates that the Recorder is timer
recording
or
that
a
timer
recording is
programmed.
INTRODUC
HQ, SQ, LQ, EQ
Indicates
ST
Indicates
a
stereo broadcast is
SAP Indicates that
an
TRK
Indicates current
chapter
mode.
received.
SAP BILINGUAL
broadcast is
CHP
being
recording
being
received.
number.
Indicates current track number.
TITLE
Indicates
current title number
DVD
A +RW
SVC D
-
TITLE
TRK
CHP
SAP
ST
HQSQLQEQ
REC
-RW
Character indicators
Indicates clock, total playing time, elapsed time,
chapter/track number, channel, etc.
title
number,
13
Remote Control
Key
POWER
Turns the Recorder ON and OFF.
PIP
Turns PIP function
and off.
on
0-9 numerical buttons
Selects numbered
in
options
a menu.
source
to
for
use
AV2
(Tuner, AV1,
recording
or DV IN).
AUDIO
Selects
an
audio
language (DVD)
or an
audio channel
(CD).
SUBTITLE
Selects subtitle
languages.
ANGLE
Selects
DVD
a
angles,
camera
if available.
REC
Starts
recording.
(z)
Press
repeatedly to set
the recording time.
REC MODE
Selects the
mode:
recording
HQ, SQ, LQ,
or
EQ.
TIMER REC
Timer Record
Displays
a
Program
track number
List
or a
on
mark
on
POWER: Turns the TV
MUTE:
Go to next
chapter or track. Returns to
beginning of current chapter or track or
go to previous chapter or track.
SCAN(m/M)
Search backward
PAUSE/STEP
(about
the
of
the
image.
length
the disc
TV
typical
commercial).
a
TITLE
Displays
the disc's Title menu, if
available.
THUMBNAIL
a
thumbnail
picture
N
chapter
Original and Playlist
in the
menu.
CHP ADD
Inserts
a chapter marker when playing/
recording a VR mode DVD-RW disc.
MARKER
Marks any
point during playback.
SEARCH
Displays
Marker Search
menu.
PROGRAM
Add the track to the
14
Program
(PLAY)
Starts
playback.
STOP
(x)
Stops playback
or
recording.
MENU/LIST
Accesses
or
menu on a
Playlist
DVD
List.
disc, Title List
menu.
SETUP
Accesses
or removes
the
Setup
menu.
ENTER
Acknowledges menu selection.
Displays information while viewing
a
TV program.
b / B / v / V
Selects
an
CH v / V
Scans up
channels.
(left/right/up/down)
option
in the
menu.
(up/down)
or
down
through
memorized
DISPLAY
Accesses On-Screen
RETURN
for the
use
(X)
playback or recording temporarily, press again to exit pause mode.
-
for
forward.
Pause
-
Selects
current title and
or
the
INSTANT SKIP
on
turns TV sound
to restore.
SKIP(./>)
menu.
DVD video
Temporarily
OFF, press again
ZOOM
Skips
source.
CH +/--: Selects TV's channel.
-
15 seconds forward
tray.
and off.
on
INPUT: Selects the TV's
-
Marker Search
Enlarges
(Z)
and closes the disc
TV Control Buttons
menu.
CLEAR
Removes
OPEN/CLOSE
Opens
VOL +/--: Sets TV's volume.
INPUT
Selects the
Functions Overview
Removes the
Displays
Display.
(O)
the
menu.
menu on a
video CD
with PBC.
3D SURR.
Selects 3D SURROUND
during
playback.
RANDOM
Plays
tracks in random order.
REPEAT
Repeat chapter, track, title,
A-B
Repeat
sequence.
all.
Rear Panel Connections
ANT. IN
Connect the antenna to this terminal.
COAXIAL
Connect to
(Digital audio out jack)
digital (coaxial) audio equipment.
COMPONENT VIDEO OUT/PROGRESSIVE SCAN
Connect to
a
TV with Y Pb Pr
VIDEO OUT/AUDIO OUT
Connect to
a
(Y
Pb
INTRODUC
Pr)
inputs.
(Left/Right)
TV with video and audio
VIDEO IN 1 / AUDIO IN 1
inputs.
(Left/Right)
Connect the audio/video
output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
AC Power Cord
Plug
OPTICAL
into the power
source.
(Digital audio out jack)
digital (optical) audio equipment.
Connect to
S-VIDEO OUT
Connect to
an
S-Video
Input
on
TV.
RF. OUT
Passes the
signal
from the ANTENNA to your TV/monitor.
Caution
Do not touch the inner
pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
15
Connections
Connecting Antenna/Cable
TV to
DVD Recorder
Cable Service Without Cable Box
If your cable wire is connected to your TV without a converter
descrambler box, unscrew the wire from your TV and attach
or
it to the ANT.IN
Disconnect the antenna leads from the
1
rear
of the
TV.
RF.OUT
2 Identify
a
the
type of cable from your antenna. If it is
as illustrated, it is a 75 ohm coaxial
antenna cable. This cable will connect
jack
marked ANT.IN
on
directly
to
your DVD Recorder.
jack
With this
and
on
the DVD Recorder. Use the
and the 75 ohm antenna
input jack
connection, you
can
receive all
channels.
(All
cable
hyperband
round cable
the
jack
supplied
round coaxial cable to connect between the DVD Recorder's
on
the TV.
midband, super band,
channels.)
Cable Service With Cable Box
If
a
converter is
required
in your cable
system, follow the
instructions below:
The cable
ip
If your antenna lead wire is a flat
connect it to an Antenna Adapter
type
antenna
(300-ohm
Adapter onto the
(not supplied) and slip the
jack. The Adapter does not screw on
Recorder, it just slips over the jack.
to
cable,
75-ohm)
ANT.IN
To view
both TV and DVD Recorder opera-
or
record
a
CATV channel
1.
Tune the TV to the correct video
2.
Set the DVD Recorder channel selector to the
to the DVD
channel.
output chan-
using CH (v / V)
(Example: CH3)
or
number
of your DVD Recorder.
Select the channel to view at the Cable Converter Box.
(0-9)
Antenna
input
nel of the Cable Converter box
3.
Antenna
hookup permits
tion.
ote
Cable TV
If you
Wall Jack
sary to do EZ Channel Scan
are
using
a
cable box to tune
as
channels, it is
indicated
on
not
neces-
page 20.
Flat Wire
Cable TV
(300 ohm)
Wall Jack
300/75 ohm
Adaptor
(Not supplied)
OR
OR
Back Panel of
Typical
Cable Box
Rear of DVD Recorder
Rear of DVD Recorder
16
Connections
ips
Depending
(Continued)
Component
your TV and other equipment you wish
to connect, there are various ways you could connect
the Recorder. Use only one of the connections
on
Please refer to the manuals of your TV, VCR, Stereo
or other devices as necessary to make the
connection
PROGRESSIVE SCAN
jacks from the DVD
corresponding in jacks on the
Pr cable (C).
Recorder to the
using
an
Y Pb
Connect the Left and
2
AUDIO OUT
Right
the DVD Recorder to the audio
best connections.
the TV
reproduction, connect the
Recorder's AUDIO OUT jacks to the audio in jacks
on your Amplifier, Receiver, Stereo, or audio/video
equipment. See "Connecting to an Amplifier" on page
(Color Stream )
Connect the COMPONENT VIDEO OUT/
1
described below.
System
Video
using
the audio cables
TV
jacks from
jacks on
in
left/right
(A).
For better sound
Progressive Scan (ColorStream
If your television is
Caution
Make
sure
the DVD Recorder is connected
the TV. Tune the TV to the correct video
connection
high-definition
"digital ready"
television, you may take advantage of the DVD
Recorder's progressive scan output for the highest
video resolution possible.
If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try
Progressive Scan on the DVD Recorder.
18.
--
pro)
directly to
input chan-
a
or
nel.
--
Do not connect the DVD Recorder's AUDIO OUT
to the
--
phono
in
jack (record deck)
jack
of your audio sys-
Connect the COMPONENT VIDEO OUT/
1
PROGRESSIVE SCAN
jacks from the DVD
corresponding in jacks on the
optional Y Pb Pr cable (C).
tem.
Recorder to the
Do not connect your DVD Recorder via your VCR.
The DVD image could be distorted by the copy pro-
using
tection
Connect the Left and
2
system.
the TV
Make
one
of the
following connections, depending
existing equipment.
Set
Progressive
--
from the DVD Recorder to the
antenna in
jack on the TV using the 75-ohm Coaxial
supplied (R). The RF.OUT jack passes the signal
through from the ANT IN jack.
Cable
Scan
option
connection
(yellow
1
Recorder to the video in
TV
video cable
2
using
analog video
jacks).
Rear of TV
ANTENNA
S-VIDEO
INPUT
COMPONENT VIDEO INPUT
Pr
the DVD
Setup
VIDEO OUT & S-Video
Video connection
jack from
jack on the
to "ON" in the
see
INPUT
Connect the VIDEO OUT
audio cables
page 22.
Progressive scan does not work with the
menu,
RF coaxial connection
jack
supplied
jacks from
jacks on
(A).
in
otes
--
Connect the RF.OUT
the
left/right
on
of your
capabilities
using
TV
AUDIO OUT
Right
the DVD Recorder to the audio
TV Connections
the
an
Pb
VIDEO
INPUT
AUDIO INPUT
Y
L
R
the
(V).
Connect the Left and
Right AUDIO OUT jacks from
left/right in jacks
using the audio cables (A).
the DVD Recorder to the audio
from the TV
R
S
C
A
V
S-Video connection
1
Connect the S-VIDEO OUT
Recorder to the S-Video in
S-Video cable
2
jack from the DVD
jack on the TV using
the
(S).
Connect the Left and
Right AUDIO OUT jacks from
left/right in jacks on
audio cables (A).
the DVD Recorder to the audio
the TV
using
the
Rear of DVD Recorder
17
DVRHOKUP
Connections
(Continued)
Amplifier Connections
Rear of DVD Recorder
Connecting to an Amplifier equipped with
channel analog stereo or Dolby Pro Logic
Pro LogicTM
Connect the Left and
Right AUDIO
two
ll/
OUT
jacks from the
right in jacks on
System, using the
DVD Recorder to the audio left and
your Amplifier, Receiver,
audio cables (A).
or
Stereo
Connecting to an Amplifier equipped with two
digital stereo (PCM) or to an Audio/
Video Receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2, or DTS)
channel
Connect
1
one
X
of the DVD Recorder's DIGITAL
jacks [OPTICAL (O) or COAXIAL (X)]
to the corresponding in jack on your Amplifier. Use
an optional digital (optical O or coaxial X) audio
You will need to activate the Recorder's
Digital
"Audio"
on
page
digital
out-
24).
Multi-channel sound
A
digital multi-channel
sound quality. For this
connection
the best
provides
you need a multi-channel
Audio/Video Receiver that supports one or more of the
audio formats
supported by your DVD Recorder
(MPEG 2, Dolby Digital and DTS). Check the receiver
manual and the logos on the front of the Receiver.
Caution:
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
selected.
otes
If the audio format of the
digital output does not match
capabilities of your Receiver, the Receiver will
produce a strong, distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital connection can only be obtained if your Receiver is
equipped with a Digital Multi-channel decoder.
the
--To
see
--
the audio format of the current DVD in the
press AUDIO.
This Recorder does not perform internal
screen
of
a
multi channel
Recorder to
a
DTS sound track. To
surround, you
DTS
this Recorder's
18
on-
display,
decoding
COAXIAL
DIGITAL INPUT
2 put. (See
--
O
AUDIO OUT
cable.
--
A
(2 channel)
enjoy
DTS
must connect this
compatible Receiver
digital audio outputs.
via
one
of
Amplifier (Receiver)
L
R
AUDIO INPUT
OPTICAL
DIGITAL INPUT
Connections
Accessory
(Continued)
Audio/Video
(A/V)
Connections to DVD Recorder
Connect the
input jacks (AV1, AV2) from the DVD
jacks on your
Accessory Component, using audio/video cables.
Recorder to the audio/video out
ote
If you use the S-VIDEO IN jack on the front panel, the
VIDEO IN jack on the front panel is not available.
Digital Camcorder Connections
Using
the front
connect
a
panel DV IN port, it is possible to
Digital Camcorder or Video Deck or
Recorder and digitally transfer DV tapes
DV
DVD-R/RW
or
DVD-R/RW discs to DVD-R/RW.
Use a DV cable (not supplied) to connect the DV in/out
jack of your DV Camcorder/ Video Deck to the front
panel DV IN port of this Recorder.
ote
Jack
panel of Accessory Component
(VCR, Camcorder, etc.)
This
not
is for connection to DV
jack
compatible
with
Digital
equipment only.
Satellite
Tuners, PCs
It is
or
D-VHS Video Decks.
S-VIDEO
OUTPUT
AUDIO
OUTPUT
DV
R
Digital
Camcorder
OR
DV
IN/OUT
L
VIDEO
OUTPUT
OR
Rear of
DVD Recorder
Front of
DVD Recorder
Front of DVD Recorder
19
DVRHOKUP
Pre-operation Setup
Menu
In this
Operation
system, there
menu
tomize the
6
settings provided.
CATV)
Most
three levels to set up the options, but some require
greater depth for the variety of settings. If you press
SETUP, only
the first and second level of the
tem will appear
on
the TV
to
help
see
"B"
The third level
screen.
Tuning
on
the
Band
band
option (TV
TV
EZ Channel Scan
sysbe
CATV
Ch. Add/Del
can
Clock Set
B. For
displayed by pressing
els, you will
menu
tuning
then press ENTER.
TV: If you are using a standard antenna to receive channels.
CATV: If you are using basic cable to receive channels.
several ways to cusmenus consist of
are
Use v / V to select the
or
navigating the menu levright side of the menu label
TV
Aspect
Display
you go to the next level.
Mode
Progressive Scan
PBC
To
up and exit the Menu:
Press SETUP to bring up the menu. A second press of
SETUP will take you back to initial screen.
Factory
bring
To go to the next level:
Press B on the Remote Control.
Set
EZ Channel Scan
This DVD Recorder is
synthesized
tuner
equipped with a frequency
capable of receiving up to 181
channels. These include VHF channels 2-13, UHF
channels 14-69 and CATV channels 1-125.
To go back to the previous level:
Press b on the Remote Control.
Channel Search:
Standard Menu
1
2
Operation
Press SETUP.
The
Setup
menu
Antenna/Cable TV
as
shown in
to DVD Recorder
on
page 16.
Tuning
Connecting
antenna
or
option.
Band
EZ Channel Scan
Stop
Ch. Add/Del
While the desired item is
move
selected, press B
to
move
Press SETUP to exit the
setting
then
Setup
menu.
GENERAL
Band Select
Press SETUP.
menu
appears.
2
Use v / V to select the GENERAL
3
4
5
While the GENERAL
option
option.
is selected, press B
to move to the second level.
Use v / V to select the
Press B to
20
move
Scan
PBC
Set
to the third level.
ENTER to confirm your selection.
Some items require additional steps.
Setup
11%
Mode
Progressive
option.
Searching
Aspect
Display
Use v / V to select the desired
The
TV
Factory
Press B to
Tuning
Clock Set
to the second level.
Use v / V to select the second desired
1
type of
system,
appears.
Use v / V to select the desired
3
4
5
6 press
7
Connect the DVD Recorder to the desired
cable TV
Tuning
Band
to the third level.
option.
1
Press SETUP.
The
Setup
menu
appears.
2
Use v / V to select the General
3
4
5
6
While the General
move
option
option.
is selected, press B to
to the second level.
Use v / V to select the EZ Channel Scan
Press B to
"Start" icon is
move
option.
to the third level.
highlighted.
Press ENTER to
begin the channel search.
automatically cycle through all available channels in the area (cable or antenna) and
place them in the tuner's memory.
The tuner will
Pre-operation Setup (Continued)
To Add
or
Erase Channels from
This feature allows you to add to
from memory manually.
1
or erase
Memory
channels
Press SETUP.
The
Setup
menu
appears.
2
Use v / V to select the General
3
4
5
While the General
move
option
option.
Use v / V to select the CH. Add/Del
Edit icon is
highlighted.
Tuning
Press SETUP.
The
Setup
menu
appears.
2
Use v / V to select the
Setup
3
While the
is selected, press B to
4
Use v / V to select the Clock Set
5
Press B to
6
Press ENTER.
move
Setup
menu
menu.
to the second level.
option.
option.
to the third level.
move
1
is selected, press B to
to the second level.
Press B to
Clock Set
move
to the third level.
Band
EZ Channel Scan
Ch. Add/Del
Tuning
Edit
TV
Band
EZ Channel Scan
Clock Set
Ch. Add/Del
Aspect
Display
Clock Set
TV
Aspect
Display Mode
PBC
Factory
Manual
Mode
Progressive Scan
Progressive
Set
Date
--
Year
Time
----
--
:
--AM
Press ENTER.
The Channel Edit
menu
7
appears.
Enter the necessary information for date and
time.
b / B
Add
Ch. 2
or
v / V
Delete
0-9
Use v / V
or
Input
Close
number buttons to select
a
channel
(left/right):
Moves the
cursor
to the
previous
next column.
cursor
7
/
PBC
Factory Set
6
--
Scan
(up/down): Changes
position.
the
setting
at the current
Press ENTER to confirm your setting, then
SETUP to exit the Setup menu.
8 press
to add or delete then press ENTER.
Add or Delete icon is highlighted.
Press ENTER to confirm your
8
9 Repeat steps
7-8 to add
setting.
or erase
additional
channels.
21
DVRSETUP
Pre-operation Setup (Continued)
TV
Aspect
You
can
-
-
Progressive Scan
choose:
4:3:
Select if
a
standard 4:3 TV is connected.
16:9:
Select if
a
16:9 wide TV is connected.
Tuning
?
Band
EZ Channel Scan
Ch. Add/Del
?
Clock Set
TV
Aspect
4:3
Mode
Display
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks, but are connecting the
DVD Recorder to a standard (analog) television, set
Progressive Scan to OFF.
If you are using the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks for connection to a TV
or monitor that is compatible with a progressive scan
signal, set Progressive Scan to ON.
16:9
Progressive Scan
PBC
Factory
Set
Tuning
Band
EZ Channel Scan
Ch. Add/Del
Display
Display
Clock Set
Mode
Mode
TV
works
setting
only
when the TV
Aspect
ratio is set to "4:3".
You
-
can
picture with bands on the
portions of the screen.
Automatically displays the wide picture on
the entire screen and cuts off the portions
Displays
a
Pan Scan:
that do not fit.
Tuning
ON
Caution
Once the
setting for progressive scan output is entered,
image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
an
to ON in error, you must reset the unit.
Band
1)
EZ Channel Scan
Ch. Add/Del
window.
Aspect
Display
Mode
Progressive Scan
Letter Box
Pan Scan
2)
Press STOP and hold it for five seconds before
releasing
standard
PBC
Factory
Remove any disc from the unit and close the disc
on the display
tray. See that "NO DISC" is displayed
Clock Set
TV
22
OFF
PBC
wide
upper and lower
-
Mode
Progressive Scan
Factory Set
choose:
Letter Box:
Aspect
Display
Set
visible
it. The video
setting
on a
and
a
output will be restored
will
picture
analog
conventional
once
TV
or
again
to the
be
monitor.
Pre-operation Setup (Continued)
PBC
Language
The PBC
(PBC)
-
ON:
setting
to ON
or
be
can
changed.
Set
Playback
Control
OFF.
Video CDs with PBC
are
played according
to the
PBC.
-
Select
a
language
for the
Setup
menu
and
on-screen
display.
OFF: Video CDs with PBC
as
Display Language
are
played
the
same
DVRSETUP
way
Audio CDs.
Tuning
Band
EZ Channel Scan
Ch. Add/Del
Clock Set
TV
Aspect
Display Mode
Progressive
Scan
PBC
OFF
Factory
Set
ON
Disc
Language
Select
-
Factory Set
-
Other:
To select another
disc is
not be reset.
Tuning
(Rating, Password,
and
language,
select Other
then press ENTER. Use the numbered
and ENTER buttons to key-in the correspon-
option
ding 4-digit
ote
options can
Country Code)
and Subtitle.
selected.
If you need to, you can reset the Recorder to all its factory settings. Select ''SET'' icon then press ENTER.
Some
a language for the disc's Menu, Audio,
Original: The original language set for the
number
according
to the lan-
guage code list on page 57. If you a mistake
before pressing ENTER, press b repeatedly
to delete one by one and correct it.
Band
EZ Channel Scan
Ch. Add/Del
Display Menu
Original
Clock Set
Disc Menu
English
TV
Disc Audio
French
Disc Subtitle
German
Aspect
Display
Mode
Progressive
Spanish
Scan
Italian
PBC
Factory Set
Chinese
SET
Polish
Other----
23
Pre-operation Setup (Continued)
Audio
Sampling Frequency
Each DVD disc has
a
variety of audio output options.
Output according to the type
If your Receiver
or Amplifier is NOT capable of handling
signals, select 48 kHz. If this choice is made,
unit will automatically convert any 96 kHz signals to
Set the Recorder's Audio
96 kHz
of audio
this
system you
use.
48 kHz
so your system can decode them.
If your Receiver or Amplifier is capable of handling
96 kHz signals, select 96 kHz. If this choice is made,
Dolby Digital
PCM: Select if connected to
2-channel
digital stereo
digital audio outputs
sound in the PCM 2ch format if you play a DVD video
disc recorded on the Dolby Digital recording system.
amplifier.
a
The DVD Recorder's
this unit will pass each
any further processing.
Dolby Digital
Bitstream: Select "Bitstream" if you connected the DVD
Recorder's DIGITAL OUT jack to a Dolby Digital
decoder
(or
Amplifier
Dolby Digital decoder).
an
or
other
equipment
with
type of signal through without
DTS
MPEG
a
Sampling Freq.
48KHz
DRC
96KHz
Vocal
Dolby Digital
PCM
DTS
Bitstream
MPEG
Sampling Freq.
DRC
DRC
(Dynamic Range Control)
Vocal
With the DVD
format, you can hear a program's soundtrack in the most accurate and realistic presentation
possible,
thanks to
digital
DTS
OFF: If you select "OFF", the DTS
the DIGITAL OUT jack.
signal
is not
output
and the
technology. However,
quietest ones). Then, you may
losing clarity
lower volume without
through
at
Bitstream: Select "Bitstream" if you connected the DVD
Recorder's DIGITAL OUT jack to a DTS decoder (or an
DRC to ON for this effect.
Amplifier
audio
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
or
other
equipment
with
a
DTS
a
decoder).
listen to
a
movie
of sound. Set
Dolby Digital
DTS
Dolby Digital
MPEG
DTS
OFF
MPEG
Bitstream
Sampling Freq.
Sampling Freq.
DRC
OFF
Vocal
ON
DRC
Vocal
MPEG
Vocal
PCM: Select if connected to
2-channel
digital stereo
digital audio outputs
sound in the PCM 2ch format if you play a DVD video
disc recorded on the MPEG2 recording
amplifier.
a
The DVD Recorder's
system.
Amplifier
playing.
if
only
multi-channel karaoke DVD is
on
the disc will mix into
normal stereo sound.
or
other
equipment
with
a
MPEG
decoder).
DTS
MPEG
Sampling Freq.
DRC
Vocal
Dolby Digital
MPEG
PCM
Sampling Freq.
Bitstream
DRC
Vocal
OFF
ON
DTS
24
a
The karaoke channels
Dolby Digital
Bitstream: Select "Bitstream" if you connected the DVD
Recorder's DIGITAL OUT jack to an MPEG decoder (or
an
Set Vocal to ON
Pre-operation Setup (Continued)
Lock
If you
(Parental Control)
If you
Set Password
Changing
the
word,
4-digit
forget your password, to clear the current passfollow the procedure below.
1. Press SETUP to
code
code
forget your 4-digit
display
the
Setup
menu.
2. Use the Number buttons to enter the
Set Password
Chang
Rating
Delete
Country
number
6-digit
"210499".
New Password
DVRSETUP
3. Select "Yes" then press ENTER. The 4-digit password is cleared. Enter a new code as shown left.
Code
Rating
Movies
on
children.
DVDs may contain
information that
certain
1
2
3
4
5
6
Press SETUP.
The
Setup
menu
While the Lock
move
option
Ratings
option.
is selected, press B to
to the second level.
Use v / V to select the Set Password
country-dependent.
are
alternate
move
or
to
rated
The Parental Control
being played
played with
Set Password
to the third level.
No Limit
8
Code
(Adult)
7
6
5
If you have not entered
Enter a 4-digit password
password yet;
using the numbered buttons to create a personal 4-digit security password,
then press ENTER. Enter the 4-digit password again
and press ENTER to verify.
If you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security passa
4
3
2
1
1
2
Follow
steps 1-3
If you make
repeatedly
a
mistake before
to delete
pressing ENTER,
password numbers one by
press b
one
then correct it.
While
"Change"
is selected, press ENTER.
If you select "Delete" then press ENTER. The password is deleted.
Enter
Use v / V to select the
ENTER
move
Follow
Eight (8)
has the least
not active. The disc will
repeatedly
to delete
restrictions.
playback
Limit, Parental Control is
play
able for children. If you set
in full.
a
scenes
rating
not suit-
for the
Recorder, all disc
and press
lower will be
played
scenes with the same rating or
played. Higher rated scenes will not be
unless
an
alternate
or a
lower
one.
scene
If
no
scene
password
one
or
change
the
is available
must have the
the
rat-
scene
must enter the
rating
on
same
suitable alternate
found, playback will stop. You
press b
pressing ENTER,
password numbers one by
restrictions.
Level 1 to 8: Some discs contain
ing
mistake before
to the third level.
No Limit: If you select No
ip
a
Rating option.
has the most
disc. The alternate
If you
(Set
6 as shown above to the left
tons. One
4-digit password using the numbered
buttons to create a personal 4-digit security
password then press ENTER.
4-digit password again
to verify.
shown above to the left
3
step
(Set
4 Password).
5Selectaratingfrom1to8usingthev/Vbut(1)
playback
a
Enter the
as
(Kids)
Password).
Press B to
9
disc
scenes are
scenes.
Country
ip
8
complete
the disc. These
feature allows you to prevent discs from
by your children or to have certain discs
option.
word, then press ENTER.
7
to the
applies
scenes on
Rating
Press B to
not suitable for
from Level 1 to 8, and alternatively, more suitable
scenes are available for selection on some discs.
appears.
Use v / V to select the Lock
scenes
Therefore, discs may contain Parental Control
is
4-digit
play
level in order to
the disc.
then correct it.
6
Press ENTER to confirm your rating selection,
then press SETUP to exit the menu.
25
Pre-operation Setup (Continued)
Country
Code
Enter the code of
Recording
country/area
a
used to rate the DVD video
Code
(See "Country
whose standards
were
to the list
disc, referring
List", page 58.).
Record Mode Set
You
can set the picture quality for recording; HQ (High
Quality), SQ (Standard Quality), LQ (Low Quality), EQ
(Extend Quality).
Set Password
Rating
Country
US
Code
Rec
1
2
3
4
5
6
EQ
Rec Mode Set
LQ
Aspect
DV Rec Audio
SQ
Auto
HQ
Chapter
Press SETUP.
The
Setup
menu
appears.
Use v / V to select the Lock
While the Lock
move
option
is selected, press B to
to the second level.
Use v / V to select the
Press B to
move
Country
Code
option.
password yet;
using the numbered buttons to create a personal 4-digit security password,
then press ENTER. Enter the 4-digit password again
and press ENTER to verify.
If you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security passa
2
mistake before
repeatedly
to delete
menu
appears.
Use v / V to select the
Recording option.
While the
is selected,
Recording option
press
3
Set option.
4
5
6 (HQ, SQ, LQ EQ)
your selection,
7 press
Press B to
move
a
desired Record Mode
or
Press ENTER to confirm
SETUP to exit the
or
one
to the third level.
Use v / V to select
recording,
4:3
then
menu.
Ratio
Aspect
can set the recording aspect ratio
you're recording (16:9 widescreen,
you
to suit the material
press b
pressing ENTER,
password numbers one by
standard).
then correct it.
Rec Mode Set
7
Select the first character
using
the v / V
Rec
buttons.
Aspect
DV Rec Audio
Auto
8
Shift the
cursor
using B buttons and select
using v / V buttons.
the
second character
Press ENTER to confirm your country code
then press SETUP to exit the menu.
9 selection,
26
B
to move to the second level.
When
ip
a
Setup
Record
word, then press ENTER.
If you
The
Use v / V to select the Rec Mode
to the third level.
If you have not entered
Enter a 4-digit password
Press SETUP.
1
option.
Chapter
4:3
16:9
Pre-operation Setup (Continued)
DV Rec Audio
Start
Disc Format
Finalize
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN
Disc Label
Disc Protect
port.
Some
camcorders have two stereo tracks for
digital
audio. One is recorded at the time of
shooting; the other
over-dubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the over-dubbed sound is used.
DVRSETUP
is for
1
Rec Mode Set
Rec
Auto
Aspect
DV Rec Audio
Audio 1
Auto
Audio 2
Chapter
Chapter
When
markers
recording, chapter
specified interval. You can
are
put
set this interval to 5
15 minutes. If you select
switches automatic chapter marking off,
10
minutes,
in at the
or
minutes,
None, it
no
Press SETUP.
The
Setup
menu
appears.
2
Use v / V to select the Disc
3
4
5
6
7
While the Disc
separations.
move
option.
is selected, press B to
option
to the second level.
Use v / V to select the Disc Format
Press B to
move
Start icon is
option.
to the third level.
highlighted.
Press ENTER.
Disc Format
For
menu
DVD-RWs,
Mode
Mode
(VR
appears.
use
or
/ B to select
Video
Mode)
a
Disc Format
then press
ENTER.
For
DVD+RWs, go
to
step 8.
Rec Mode Set
Disc Format
Rec
Aspect
Select
DV Rec Audio
Auto
a
Mode
None
Chapter
VR Mode
Video Mode
5 Min
10 Min
15 Min
8
Use b / B to select "Ok" then press ENTER.
It takes a few moments to format the disc.
Disc Format
All data
the disc will be deleted.
on
Proceed?
Disc
Ok
Cancel
Disc Format
If you load a completely blank
initialize the disc.
disc, the Recorder will
DVD-R: The Recorder initializes the disc for Video
mode. The
recording
mode will
always
Disc Protect
DVD-RW: The Recorder initializes the disc for VR
mode.
menu
will appear. Select
"Yes" then press ENTER.
DVD+RW: The Recorder initializes the disc for
DVD+RW mode.
Also, you
to the
can
right.
format the disc from the
everything
be Video
mode.
DVD+R: The Initialization
Caution
If you want to change the disc format,
recorded on the disc will be erased.
When
recording
in DVD+RW / +R disc
matted DVD-RW
disc,
set to ON to
or
VR mode for-
prevent accidental
of the disc loaded. If you
need to unlock the disc to make edits, select OFF.
recording, editing
or
deleting
Disc Format
Setup
menu as
Finalize
Disc Label
Disc Protect
OFF
ON
27
Pre-operation Setup (Continued)
Finalize
Finalizing 'fixes' the recordings in place so that the disc
be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu for
navigating the disc. This is accessed by pressing
?
The disc
?
For discs formatted
will
see
be up to 32 characters long.
on a different DVD Recorder, you
limited number of characters.
name can
only
a
can
MENU/LIST
or
Disc Format
Finalize
Edit
Disc Label
Disc Protect
TITLE.
Caution
After
you've
finalized
DVD-RW,
or a
anything
else
disc recording on a DVD-R,
disc, you can't edit or record
that disc except on a DVD+RW
a
DVD+R
on
disc.
Disc Format
Finalize
Finalize
Disc Label
Unfinalize
Follow
1
2
Disc Protect
steps 1-3
as
shown Disc Format
on
page
27.
Use v / V to select the Disc Label
Press B to
move
Edit icon is
highlighted.
3
4 Keyboard
option.
to the third level.
Press ENTER.
menu
appears.
DVD-RW
1
2
3
4
Follow
steps 1-3
as
shown
on
page 27
Format).
Use v / V to select the Finalize
option.
0
ABCDEFGH
J
I
UVWXYZ
Press B to
Finalize is
move
to the third level.
OK
highlighted.
5
Press ENTER.
Finalize
menu
appears.
Finalize
Enter
Cancel
Delete
Space
for the disc. Use vVbBto select
a name
character then press ENTER to confirm your
selection.
a
Alphabet Capital:
?
Switches the
Symbols:
?
finalizing
cursor
how much is recorded
titles
on
the disc. A
8 minutes
or more
on
depends
the
heavily
on
the
type of disc,
recorded disc
can
take up to
menu.
case
to
symbol
characters.
menu.
a
position.
cursor
to left
or
right.
Remote control buttons for
entering
a name
(PLAY): Inserts a space at the cursor position.
X (PAUSE/STEP): Deletes the next character from the cursor position.
x (STOP), CLEAR: Deletes the previous character at the
cursor position.
. / >: Moves cursor to left or right.
Numbers (0~9):Enters the character of corresponding
After
doing this,
you
location
edit and re-record onto the disc.
for the disc. This
on
the selected column.
MENU/LIST, DISPLAY: Switches the keyboard type
(Alphabet Capital, Alphabet Small, Symbols)
Disc Label
name
appears when you load the disc and when you
disc information on-screen.
28
to lower
N
ip
a name
keyboard
disc, and the number of
If you load a DVD-RW or DVD+RW that has already
been finalized, you can 'unfinalize' it by choosing
Use this to enter
Inserts
b / B: Moves
?
to finalize.
Unfinalize from the Finalize
keyboard
space at the cursor position.
Delete: Deletes the previous character at the
Space:
?
?
finalization takes
Switches the
?Cancel: Select to exit the
the disc.
ote
long
case
OK: Select to finish.
?
Select Ok then press ENTER.
How
to upper
characters.
Cancel
The Recorder starts
keyboard
characters.
?A lphabet Small: Switches the
Ok
can
(1.6)
123456789
KLMNOPQRST
Do you want finalization?
5
6
Alphabet Capital
(Disc
display
6
7
Choose OK then press ENTER to
and return to the
Setup
Press SETUP to exit the
menu.
menu.
save
the
name
Pre-operation Setup (Continued)
Overview for the On-Screen
This manual
Display
display
can
operating the
require specific operation
or allow only limited operation during playback. When
this occurs, the symbol
appears on the TV screen,
indicating that the operation is not permitted by the DVD
loaded
Recorder
2
gives
basic instructions for
Disc Information On-screen
You
Display
various information about the disc
on-screen.
DVD Recorder. Some DVDs
or
is not available
Displaying
on
the disc.
Information While
Watching
While
viewing the TV channels, press ENTER
DISPLAY to display/remove the information
displayed on-screen.
e.g., when
a
TV
or
1
Press DISPLAY
information
To
repeatedly to display/change
displayed on-screen.
the
the On-Screen Display, press
repeatedly until it disappears.
descriptions on the following pages for
explanations of displays as a disc is
remove
DISPLAY
See the
detailed
playing.
Recorder Status Icon
Resume
DVD-RW in VR mode is inserted.
Action
play
Displays
from this
prohibited
or
point
not available
otes
Indicates channel
number, audio signal
received
Indicates the record
by
the tuner.
Some discs may not provide all of the features on the
On-Screen Display, examples shown the following
pages.
If no button is
Display
mode,
will
pressed
disappear.
for 20
seconds, the On-Screen
free space, and elapsed
time on progress bar.
Indicates disc
name
and format.
DVD-RW
Ch. 04
VR Mode
SQ
STEREO
1H 32M Free
6/22/2004
11:35 AM
Indicates current date and time.
29
DVRSETUP
Pre-operation Setup (Continued)
Disc Information
On-screenDisplay (Continued)
DVD
Shows the
elapsed playing
time
and total time.
Shows the current
title/chapter
number
Shows the Current
TITLE: 1/4
and total number of
CHAPTER: 3/28
0:06:32
/
mode.
2:12:10
titles/chapters.
Menu
Function (Use v / V to select desired option)
Options
Shows the current title number and total number of
Title Number
1/6
Chapter
Number
4/26
Time Search
0:10:30
Audio
Language
Digital Audio
Output Mode
1.
and
Subtitle
ENG
D 5.1CH
titles, and skips
ABC
Angle
OFF
1/3
Sound
3D SUR.
b/B,or
Numbers, ENTER
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
b/B,or
Numbers, ENTER
Shows the elapsed playing time, and
b/B,
Numbers, ENTER
searches the
point by
the
elapsed
time
directly.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes
Language
to the desired title number.
Selection Method
the
Shows the current subtitles language, and
changes
the
b/B
setting.
Shows the current angle number, total number of
angles, and changes the angle number.
Shows the current sound mode, and
changes
the
elapsed playing
b/B
b/B
setting.
Shows the
VCD
b/B
setting.
time
and total time.
Shows the current track
number and total number
of
tracks,
or
TRACK
shows PBC
:
Shows the Current
1/17
0:06:32
/
1:00:00
mode.
On mode.
Menu
Function (Use v / V to select desired option)
Options
Track Number
1/4
Time
Audio Channel
Sound
30
0:10:30
STEREO
3D SUR.
Shows the current track number and total number of tracks
or PBC On mode, and skip to the desired track number.
Shows the elapsed playing time (Display only).
Shows the audio channel, and
changes
the audio channel.
Shows the current sound mode, and
changes
the
setting.
Selection Method
b/B,or
Numbers, ENTER
--
b/B
b/B
Pre-operation Setup (Continued)
Disc Information
On-screenDisplay (Continued)
Shows the
VR
elapsed playing
time
and total time.
Shows the title name,
recording date,
recording mode, etc.
ORG: Original
PList: Playlist
Menu
20/08
1/6
Number
4/26
Time Search
0:10:30
Digital Audio
Output Mode
1. STEREO
D 2CH
Language
ABC
Sound
OFF
3D SUR.
+RW
Video
SQ
/
mode.
2:12:10
Shows the current title number and total number of
Title Number
Subtitle
ORG
0:06:32
Function (Use v / V to select desired option)
Options
Chapter
Shows the Current
TITLE
titles, and skips
to the desired title number.
Selection Method
b/B,or
Numbers, ENTER
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
b/B,or
Numbers, ENTER
Shows the elapsed playing time, and
b/B,
Numbers, ENTER
searches the
point by
the
elapsed
time
directly.
Shows the current audio encoding method, channel
number, and changes the setting.
b/B
Shows the current subtitles language, and
changes
the
b/B
setting.
Shows the current sound mode, and
changes
the
Shows the
+R
b/B
setting.
elapsed playing
time
and total time.
Shows the title name,
recording date,
recording mode, etc.
Menu
20/08
1/6
Number
4/26
Time Search
0:10:30
Digital Audio
Output Mode
1. STEREO
D 2CH
Language
ABC
Angle
(Video
Mode
/
mode.
2:12:10
Shows the current title number and total number of
Title Number
Subtitle
0:06:32
SQ
Function (Use v / V to select desired option)
Options
Chapter
Shows the Current
TITLE
only)
OFF
1/1
Sound
3D SUR.
titles, and skips
to the desired title number.
Selection Method
b/B,or
Numbers, ENTER
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
b/B,or
Numbers, ENTER
Shows the elapsed playing time, and
b/B,
Numbers, ENTER
searches the
point by
the
elapsed
time
directly.
Shows the current audio encoding method, channel
number, and changes the setting.
Shows the current subtitles language, and
changes
the
setting.
Shows the current angle number, total number of
angles, and changes the angle number.
Shows the current sound mode, and
changes
the
setting.
b/B
b/B
b/B
b/B
31
DVRSETUP
DVD and Video CD
DVD
Video CD
or
Operation
Playback
TITLE Selection
DVD
Playback Setup
Turn the TV
on
and select the video
input
source con-
nected to the DVD Recorder.
If
a
1
System: Turn the Audio System on and select
input source connected to the DVD Recorder.
Press OPEN/CLOSE
(Z)
to open the disc
tray.
Press OPEN/CLOSE
READING appears
starts
playback
start, press N
In
some
cases,
(Z)
to close the
tray.
the
If
ip
a menu
A
menu
is
displayed
may be displayed first after
Video CD that contains a menu.
loading
a
DVD
or
DVD
Use the bBvVbuttons to select the
want to
view, then press ENTER
Press TITLE
or
title/chapter
playback.
you
to start
MENU/LIST to return to the
b / B to select
a
title number.
1/4
VR
Video
+R
VCD
more than one chapter/track, you
chapter/track as follows:
Press SKIP (. or >) briefly during playback to
select the next chapter/track or to return to the beginning of the current chapter/track.
Press SKIP (.) twice briefly to step back to the
previous chapter/track.
To go directly to any chapter/track during playback,
press DISPLAY. Then, use v / V to select chapter
icon (or for a Video CD, select track icon). Then, enter
the chapter/track number using the numbered buttons
(0-9) or press b / B.
a
title
+RW
on a
disc has
to another
VR
Video
(m
+RW
+R
VCD
M) during playback.
or
The Recorder will enter SEARCH mode.
Press RETURN
setting
(O)
2. Press SCAN
to return to the
menu display.
operating procedures for
depending on the disc.
the menu may differ
Follow the instructions on each
menu screen.
You may also set PBC to OFF in the
See page 23.
Setup
menu.
(m or M) to select the required
(Reverse play), mX2, mX4, mX8,
mX16, mX100 (backward) or MX2, MX4,
MX8, MX16, MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
To exit SEARCH mode, press N (PLAY).
b
speed:
and the exact
using
3.
Still Picture and
Frame-by-Frame Playback
otes
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
(see
"Rating",
--
v / V to select the title
or
1. Press SCAN
Use the number buttons to select the track you want
to view.
--
use
(0-9)
DVD
VCD
Menu
to
Search
menu
display.
can move
Then, press the appropriate numbered button
can move
instead.
If
title, you
one
icon.
DVD
display window, and
automatically. If playback does not
(PLAY).
the disc menu might appear
on
than
follows:
4/26
your
2 playback
3
more
as
+R
CHAPTER/TRACK Selection
chosen disc in the tray, with the
side down.
Load
disc has
+RW
Press DISPLAY then
Audio
the
VR
Video
another title
1/6
DVD
Video
1. Press PAUSE/STEP
+RW
+R
VCD
(X) during playback.
The Recorder will enter PAUSE mode.
on page 25).
DVDs may have a Region Code.
Your Recorder will not play discs that have
2. You
code different from your Recorder. The
for this Recorder is 4 (four).
3. To exit PAUSE
can
frame
a region
region code
VR
advance
or
by pressing
back up the
b / B
picture frame-byrepeatedly during PAUSE
mode.
mode, press N (PLAY).
ote
General Features
The
picture frame-by-frame
feature in
reverse
is not
available for Video CDs.
ote
Unless stated
otherwise, all operations described
use
the Remote Control. Some features may also be available on the Setup menu.
32
ip
You
ing
can
advance the
PAUSE/STEP
Control.
picture frame-by-frame by press(X) repeatedly on the Remote
DVD and Video CD
General Features
Operation (Continued)
Video CDs
(Continued)
Slow Motion
DVD
VR
Video
+RW
1. Press PAUSE/STEP
+R
(m
M) during
?
All:
repeats
repeats the all tracks
?
OFF:
does not
VCD
PAUSE mode.
to select the
(m
M)
required
speed: t 1/16, t 1/8, t 1/4, or t 1/2 (backward), or T 1/16, T 1/8, T 1/4, or T 1/2 (forward).
With a Video CD, the Slow speed changes: T 1/8,
T 1/4 or T 1/2 (forward).
To exit Slow Motion mode, press N (PLAY).
4.
or
On
a
the
Setup
Video CD with
menu
Repeat
A-B
DVD
to
To
the
Repeat
repeat
+RW
with
Repeat
Video CDs.
+R
VCD
title:
a
starting point.
icon and 'A-' appears
Slow motion
possible
function. See page
A-B
sequence in
a
2. Press A-B
is not
must set PBC to OFF in
PBC, you
use
VR
Video
Repeat
reverse
the disc.
23.
ote
in
on
play repeatedly.
1. Press A-B at your chosen
playback
repeat mode.
the current track.
ote
The DVD Recorder will enter SLOW mode.
3. Use the SCAN
desired
a
Track:
(X) during playback.
or
Track/All/Off
?
The Recorder will enter PAUSE mode.
2. Press SCAN
Repeat
-
Press REPEAT to select
on
the TV
screen.
again at your chosen ending point.
icon and 'A-B' appears on the TV screen, and the
repeat sequence begins.
Random
Karaoke DVD
3. To cancel the sequence, press A-B
select OFF.
VCD
repeatedly
to
1. Press RANDOM
The unit
during playback.
automatically begins Random Playback
"RANDOM" appears
2. To return to normal
the TV
and
screen.
press RANDOM until
the TV screen.
Time Search
DVD
playback,
"NORMAL" appears
ip
By pressing
on
on
Screen
+R
Display
during playback.
appears
on
the TV
The Time Search box shows the
2. Within 20
This function
works with DVD Karaoke discs
only
seconds,
Video CD with
Setup
menu
3. Within 20
PBC, you
to
The "0:00:00"
or
Video CDs without PBC.
use
must set PBC to OFF
the
the Random function. See
use
You
Repeat
display
time of the
v / V to select the Time
seconds,
required
can
use
the number buttons to enter
start time. Enter
not enter
an
Display.
appears in the Time Search box.
seconds from left to
page 23.
DVD
The On-
screen.
elapsed playing
Search icon in the On-Screen
in the
playback
current disc.
ote
right
hours, minutes, and
in the box.
invalid time.
If you enter the wrong numbers, press b / B to move the
under bar (_) to the wrong number. Then enter the correct
Chapter
numbers.
Video
DVD Discs
-
VR
+RW
+R
VCD
Repeat Chapter/Title/All/Off
Press REPEAT to select
?
+RW
1. Press DISPLAY twice
during Random playback, the
title (track) and resumes Random
playback.
a
VR
Video
The Time Search function allows you to start
at any chosen time on the disc.
SKIP >
unit selects another
On
0:10:30
Chapter: repeats
a
desired
the current
4
Within 20
seconds, press ENTER
to confirm the start
time.
Playback
starts from the selected time
on
the disc.
repeat mode.
chapter.
?
Title:
?
All:
repeats the current title
repeats the all titles on the disc.
?
OFF:
does not
.
(VR
mode DVD-RW disc
only)
play repeatedly.
33
PLAYBCK
DVD and Video CD
General Features
Operation (Continued)
3. Press CLEAR.
(Continued)
"Delete selected marker? Proceed?" message appears.
Zoom
4. Use b / B to select "Yes" then press ENTER.
DVD
VR
Video
+RW
+R
5.
VCD
6. To
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1. Press ZOOM
during playback
or
still
playback
to acti-
Each press of the ZOOM button changes the TV display in
the sequence shown below.
x1 size → x2 size → x4 size → x1 size (normal size)
2. Use the bBvVbuttons to
zoomed
3. To
the
picture.
normal
resume
ZOOM
through
move
playback, press CLEAR or press
until the normal picture appears.
repeatedly
remove
RETURN
vate the Zoom function.
2-4 to
Repeat steps
the Marker Search menu, press
the Contents of DVD Video
Reviewing
Discs: Menus
DVDs may contain menus that allow you to access
special features. To open the disc menu, press
MENU/LIST. Then, press the appropriate number button
to select
an
highlight
your selection, then press ENTER.
DVDs.
some
option. Or,
Marker Search
DVD
To enter
1.
start
points
playback
can
+RW
from
+R
point. Up
to
be memorized.
mark, follow these steps.
a
a
menu, the
Otherwise, the disc
menu
menu
menu may contain camera
guage and subtitle options, and
VCD
memorized
a
screen.
2. The
1/6
VR
Video
can
the bBvVbuttons to
use
DVD
If the current title has
TV
six
scene.
1. Press TITLE.
The Zoom function may not work for
You
additional Marked
(O).
Title Menu
ote
erase
will appear
on
the
may appear.
angles, spoken lanchapters for the title.
DVD
Disc Menu
1. Press MENU/LIST.
The disc
During disc playback, press MARKER when
playback reaches the spot that you want to
2. To
is
menu
remove
displayed.
the disc menu, press MENU/LIST
again.
memorize.
The Marker icon will appear
2.
Repeat step
on
the TV
screen
1 to enter up to six Marker
briefly.
points
Camera
If the disc contains
disc.
To Recall
1.
During
a
angles, you
playback.
Marked Scene
disc
playback,
The Marker Search
press SEARCH.
menu
will appear
on
the TV
screen.
2. Use the bBvVbuttons to select the Marked
Playback
RETURN
a
DVD
recorded at different
scenes
select
different
camera
camera
angle during
Press ANGLE then press b / B repeatedly
to select the desired angle.
during
playback
The number of the current
angle
appears
the TV
on
screen.
ip
The ANGLE indicator will blink
will start from the Marked
remove
can
1/3
scene
that you want to recall.
3. Press ENTER.
4. To
Angle
on a
recorded at different
scene.
the Marker Search menu, press
available
on
angles
on
the TV
at
screen
to indicate that other
scenes
angles
are
the disc.
(O).
Changing
Marker Search
1.
the Audio Soundtrack
ENG
DVD
D 5.1CH
Press AUDIO then press b / B repeatedly during playa different audio language or audio sound-
back to hear
track if available.
Move
Select
CLEAR
Delete
Close
ote
Some discs feature both
To clear Marked Scenes
1. Press SEARCH
tracks. There is
during playback
The Marker Search
menu
will appear
on
2. Use bBvVto select the Marked
want to
34
erase.
in
or
Stop
mode.
the TV
screen.
scene
that you
no
Dolby Digital and DTS soundanalog audio output when DTS is
selected. To listen to the DTS
Recorder to
a
soundtrack,
DTS decoder via
puts. See page
one
of the
18 for connection details.
connect this
digital
out-
DVD and Video CD
Operation (Continued)
Audio Channel Selection
VCD
VR
Video
+RW
STEREO
DVD
+R
Press AUDIO then press b / B repeatedly during playa different audio channel (STEREO, LEFT
back to hear
or
RIGHT).
3D Surround
DVD
This unit
can
+RW
a
+R
3D Surround
user
settings
for the last
disc that you have viewed. Settings remain in memory
even if you remove the disc from the Recorder or switch
playback from two
speakers, instead of the five or
more speakers normally required to listen to multichannel audio from a Home Theater System.
1. Press 3D SURR. then press b / B repeatedly during
playback to select "3D SUR.".
2. To turn off the 3D Surround
effect,
select "NORMAL".
VR
--
--
Settings are stored in memory for use any time.
This Recorder does not memorize settings for a disc
if you switch off the Recorder before
the disc.
commencing
to
play
PIP
(Picture-in-Picture)
DVD
VR
Video
+RW
VCD
+R
This function enables you to view the stored stations in
the sub picture during playback.
OFF
ABC
otes
effect, which
conventional stereo
Video
This Recorder memorizes the
+R
VCD
simulates multi-channel audio
DVD
+RW
recalled.
produce
Subtitles
Memory
VR
Video
off the Recorder. If you load a disc that had its settings
memorized, the latest stop position is automatically
3D SUR.
VR
Video
Last Condition
+RW
+R
Press SUBTITLE then press b / B repeatedly during
playback to see the different subtitle languages.
Instant
DVD
Skip
VR
Video
+RW
Each press INSTANT SKIP
+R
skips
forward 15 seconds.
ote
If
appears, the feature is not available
Finding
You
Locations
on a
on
Disc
the disc.
Turning
VCD
any point on a Video CD using
this function. Use this function only while a Video CD is
can
directly
access
playing. Playback jumps
1. Press SEARCH
to the
on
the TV
again
Input
screen.
33%
TRK 1
33%
source
→
Program
start
position
for
playback.
3. Press ENTER to confirm the selected
Playback
starts from the selected
position.
position.
memorized.
only
when there
are no
press PIP
selection for sub
AV1
→
AV2
selection for sub
Use v / V to
markers
picture
the program if sub picture's
input source is Tuner. The selected program number
is displayed on the TV screen. You can view the
change
selected program
ote
This function works
picture,
shown below.
Tuner
a
the sub
Press INPUT to select the
PBC
2. Use b / B to find
on
to switch it off.
picture
input source for the sub
picture. Each time INPUT is pressed, each input
source available for the sub picture is displayed as
point specified.
during playback.
The progress bar appears
PIP On and Off
Press PIP to switch
by pressing
STOP
(x).
Sub
picture position change
repeatedly until desired position is
achieved. The sub picture moves clockwise or
Press b / B
counterclockwise.
Zoom Sub
picture
repeatedly to enlarge the sub picture,
magnification level increases up to three steps.
Press ZOOM
the
35
PLAYBCK
Audio CD and MP3
Audio CD
or
Operation
MP3 Disc
Music
Playback
MP3
CD
1.
To
display
the
The DVD Recorder
Recorder
CD-ROM, CD-R,
Before
1
Insert
or
MP3
playing
Recordings on
play
can
Audio CDs.
MP3 formatted
play
can
Also, the DVD
recordings
2.
on
CD-RW discs.
read the notes
recordings,
on
menu
the TV
on
select
Program
menu
Play:
Play
a
a
track
(or folder)
on
Starts
CD
options
playback
the selected
track.
Add
Program Add: Adds the track(s)
Program List. (page 38)
to
Music
Music
Title
0:52:16
-MP3CD
Duration
04:47
FILE
TRACK 2
04:01
FILE
TRACK 3
03:01
TRACK 4
03:30
TRACK 5
04:24
FILE
TRACK 6
05:01
FILE
TRACK 7
03:48
FILE
TRACK 8
04:09
FILE
TRACK 9
05:10
FILE
TRACK 10
FILE
00:00
FILE
FILE
04:11
MARKER Mark
LIST
Close
Program
152 Items
FOLDER 01
TRACK 1
Select
1.mp3
2.mp3
3.mp3
Music-MP3 CD
4.mp3
5.mp3
6.mp3
?
7.mp3
8.mp3
9.mp3
10.mp3
Select
AUDIO CD Menu
MARKER Mark
LIST
a
MP3 CD Menu
Program
2Usev/Vtoselectatrackthenpress
(PLAY).
Playback starts.
During playback,
Add
source
view either TV channels
by pressing
INPUT
or a
repeatedly.
video
input
If you want
to return to the Music menu, press MENU/LIST.
You
can
Program
switch between the Track List and
List
menus
by pressing
Folder:
MENU/LIST.
If you select
a
Program
Folder
View All
Add
Program
(audio tracks,
files, and JPEG files), you
MP3
can select among the
Music-Audio CD menu, Music-MP3 CD menu,
and Photo CD menu by pressing TITLE repeated-
ly.
at any other
on
all MP3 files
time, press
Add: Adds all
the folder to
Folder:
the disc.
(x).
Displays
Open: Displays sub-folders
MP3 files only in the folder.
Open
On CDs with mixed content
stop playback
the folder list
on
folder.
the disc.
STOP
Displays
to
the disc.
On the Music-MP3 CD menu, press SCAN (m
or M) to move to the previous or next page.
To
the selected
menu.
ips
can
playback
the disc.
?
You
Starts
Program Add: Adds the track(s)
Program List. (page 38)
elapsed playing
time will appear on the display window and
Playback will stop at the end of the disc.
MP3
track.
View All:
the current track's
options
track.
View All
N
menu
Play:
Play
Close
Program
If you select
Folder
36
options,
then press ENTER.
Use v / V to select an option then press ENTER to
confirm your selection.
menu
Music-Audio CD
disc and close the tray.
AUDIO CD or MP3 CD menu appears
Audio CD
3
options
MP3
page 37.
screen.
-
menu
Program
Displays
View All:
and
track(s) in
(page 38)
List.
the folder list
Displays
on
all MP3 files
on
Audio CD and MP3
Pause
Operation (Continued)
Search
MP3
CD
1. Press PAUSE/STEP
1. Press SCAN
(X) during playback.
2. To return to
playback, press
PAUSE/STEP (X) again.
Track Selection
N
(PLAY)
or
>
press
briefly during
briefly
or
an
Audio
CD,
track number
ing playback
to go
to return to the
on
step
to any
track,
enter the
(0-9)
dur-
CD
Repeat Track/All(Folder)/Off
?
?
?
A-B
Repeat
To
repeat
the
menu
a
CD
sequence in
a
track:
icon and 'A' appears
Repeat
starting point.
the
on
menu screen.
2. Press A-B
again at your chosen ending point.
The Repeat icon and 'A B' appears on the menu screen,
MP3
-
desired
mode.
repeat
repeats the current track.
ALL (CD): repeats the all tracks on the disc.
FOLDER (MP3): repeats the all tracks in the
a
on
mode, press N (PLAY).
1. Press A-B at your chosen
the Track List.
Press REPEAT to select
indicated
are
back to the pre-
the numbered buttons
using
and direction
3. To exit SEARCH
to
directly
speed
display.
vious track.
On
M) during playback.
(m or M) to select the required
speed: mX2, mX4, mX8 (backward) or MX2,
MX4, MX8 (forward).
MP3
playback to go to the next track
beginning of the current track.
Press SKIP . twice
or
2. Press SCAN
CD
or
(m
The Recorder will enter SEARCH mode.
Search
Press SKIP .
CD
and the
TRACK:
current
repeat sequence begins.
3. To exit the sequence and return to normal
A-B again.
The
Repeat
icon
disappears
from the
play,
press
menu screen.
folder.
?
OFF
(No display):
Random
does not
play repeatedly.
Notes
during playback or in Stop mode.
automatically begins Random Playback and
"RANDOM" appears on the menu display.
MPEG1 audio
The unit
files that have
The Recorder
2. To return to normal
ip
By pressing
playback, press RANDOM
"RANDOM" disappears from the
during
Random
playback,
the
unit selects another track and
resumes
Random
play-
compatibility
limited
follows:
CD-R
physical
MP3 file that has
a
file
with this Recorder is
format should be "ISO 9660" and
"JOLIET".
2.
If you record MP3 files using the software which
a FILE SYSTEM, for example "Direct-
can
produce
CD" etc., it is impossible to playback MP3 files. We
recommend that you use "Easy-CD Creator", which
MP3
CD
3D Surround
late multi-channel audio
playback
creates
effects, that simu-
from two conventional
speakers, instead of the five or more speakers
normally required to listen to multi-channel audio from
Home Theater System.
3.
1. Press 3D SURR.
during playback
Changing
disappears
to select "3D SUR".
off, press 3D SURR.
from the menu display.
the Audio Channel
MP3
Press AUDIO
repeatedly
(stereo, left, or right).
ISO9660
or
JOLIET file
This DVD Recorder
a
the disc should
requires discs/recordings
different audio chan-
to meet
certain technical standards in order to achieve
playback quality.
Pre-recorded DVDs
set to these standards. There
are
are
optimal
automatically
many different types
of recordable disc formats
MP3
files) that
(see above) to
(including CD-R containing
require certain pre-existing conditions
insure compatible playback.
Customers should also note that
to hear
system.
on
a
2. To turn the 3D Surround effect
until "3D SUR"
an
Total number of files and folders
be less than 999.
stereo
nel
as
an
".mp3".
cannot create
3D Surround
CD
not read
can
MP3 Disc
back.
This unit
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
extension other than
1.
SKIP >
Recordings
An MP3 file is audio data
1. Press RANDOM
repeatedly until
menu display.
MP3
About MP3
MP3
CD
on
required
permission
is
in order to download MP3 files and music
from the Internet. Our company has no right to
grant such permission. Permission should always
be
sought
from the
copyright
owner.
37
PLAYBCK
Audio CD and MP3
Programmed Playback
The
Program function enables you to store your favorite
tracks from any disc in the Recorder memory.
Program can contain 99 tracks (Audio CD) or 256
tracks
1
2
(MP3).
Insert
Audio CD
an
Audio CD
MP3 CD
or
menu
Use v / V to select
will appear.
track
a
Play: Playback begins in the order
in which you programmed the tracks
Move
from the selected track.
Move: Moves the
Delete
MP3 disc.
or
Play
track(s)
to
change
the program order.
Delete All
Delete: Deletes the
(or folder).
the
List
Program
track(s)
from
menu.
Delete All: Deletes all tracks from
tracks
Selecting multiple
the
(folders)
List
Program
menu.
Press MARKER.
1.
A check mark appears on the track or folder. Press
MARKER again to cancel the marked track or folder.
2.
1 to mark additional tracks
Repeat step
Repeat Programmed
Press REPEAT
Press ENTER.
The
options
the left side of the
on
4 then press
6
Press MENU/LIST to
List
menus
OFF
to
place
additional tracks
display Program
List
switch between the Track List and
by pressing
on
1.
does not
(No display):
option
Erasing
5
can
"Program
Add"
ENTER.
Repeat steps 2-4
the Program list.
You
menu.
?
Use v / V to select the
to select
a
repeat mode.
TRACK: repeats the current track.
ALL : repeats the all tracks on the Program list.
?
appear
repeatedly during playback
desired
(folders).
?
3
Tracks
a
Track from the
Select the track to
erase
play repeatedly.
Program
from the
List
Program
List.
ip
menu.
Program
MENU/LIST.
Use the MARKER button to select
2.
multiple
tracks.
Press ENTER.
The
menu
options
appear
on
the left side of the
menu.
Music
Music
-
Audio CD
0:52:16
Duration
Title
-MP3CD
TRACK 5
04:24
TRACK 2
04:01
Program List
FILE 20.mp3
FILE 3.mp3
TRACK 8
04:09
FILE
TRACK 4
03:30
TRACK 1
04:47
FILE
TRACK 10
04:11
FILE
TRACK 7
03:48
FILE
TRACK 6
05:01
FILE
TRACK 3
03:01
TRACK 9
Select
00:00
FILE
05:10
MARKER Mark
LIST
Program
FILE
FILE
Close
152 Items
3.
9.mp3
2.mp3
14.mp3
List.
8.mp3
5.mp3
10.mp3
13.mp3
7.mp3
Select
Select 'Delete' option then press ENTER.
The selected track is removed from the Program
MARKER Mark
LIST
ip
Close
Program
Use "Delete All"
7
Use v / V to select the track you want to start
playing on the Program List menu.
Changing
1.
option
to
remove
Track Order in the
Select the track you wish to
all tracks.
Program
List
move.
ip
On the Music-MP3 CD menu, press SCAN
M) to move to the previous or next page.
(m
ip
or
Use the MARKER button to select
2.
Press N
(PLAY).
8 Playback begins
grammed
Playback stops after playing
track on the Program List.
the last
tracks.
Press ENTER.
The
in the order in which you prothe tracks.
multiple
menu
options
appear
on
the left side of the
menu.
programmed
3.
Select 'Move'
A
4.
yellow
option then press ENTER.
bar appears in the Program List.
Use v / V to
move
the
yellow
bar to the desired
location, then press ENTER.
Program
1.
List
menu
options
CD
MP3
To
display menu options, select a track on the
Program List menu then press ENTER.
The menu options appear on the left side of the
menu.
2.
Use v / V to select
an
confirm your selection.
38
option
then press ENTER to
The selected track is moved.
Save Your
Program
List
This Recorder
MP3
memorizes the
user proautomatically
gram list for the disc that you have programmed.
Program list remains in memory even if you remove the
disc from the Recorder
load
or
switch the Recorder off. If you
memorized, the pro-
disc that has its program list
gram list is automatically recalled.
a
JPEG File
Operation
Viewing JPEG
The Recorder
Before
below
1
can
Insert
a
play
JPEG
playing
right.
Files
5
JPEG
To
stop viewing
The Photo
menu
time, press STOP.
discs with JPEG files.
files, read "Notes
on
JPEG Files"
Skip Images
While
disc and close the tray.
menu appears on the TV
The Photo
viewing
a
screen.
Photo
Rotate
Folder 03
Folder 06
Folder 01
Folder 02
Folder 04
Folder 05
Folder 07
Folder 08
MARKER Mark
(.
or >) once
previous file.
return to the
or
Images
clockwise
JPEG
press SKIP
picture,
to advance to the next file
Use v / V while
Select
at any
reappears.
viewing
the
to
flip
on
the Photo
picture
a
picture
counterclockwise.
or
View Slide Shows
1. Select the "Slide Show"
option
menu.
2. Press ENTER.
The Slide Show
Close
menu
appears.
Slide Show
2
folder, then press ENTER.
A list of files in the selected folder appears.
Use vVbBto select
a
Object
All
Speed
Normal
JPEG
Photo
Start
Cancel
3. Use vVbBto set the
Object:
Speed:
Selected file
Sets the
Normal,
Select
MARKER Mark
speed
options.
All files.
for Slide Show
(Slow,
Fast)
or
4. Select the Start
Close
or
then press ENTER to start the
option
Slide Show.
ote
5. Press STOP to
If the
icon appears on the Photo menu, it
you cannot view those JPEG files.
means
the Photo
stop the Slide Show and
returns to
menu.
ote
3
Use vVbBto select
The
options
appear
on
a
file, then press ENTER.
the left side of the
Notes
are
use
the
You
can
in
a
file list and want to return to the Folder
the v / V buttons
on
the remote to
icon and press ENTER.
select TV channels or a video
highlight
input
to the
next page.
On CDs with mixed content (audio tracks, MP3 files
and JPEG
previous
or
you can select among the AUDIO
CD menu, MP3 CD menu, and Photo CD menu by
pressing TITLE repeatedly in Stop mode.
files),
Use v / V to select "Full View"
4 press
option
ENTER.
on
Depending
JPEG Files
on
the size and number of JPEG
then
reduce the resolution of the JPEG files to less than 4
mega
pixels
and burn another disc.
The total number of files and folders
but the total number of files
not restricted
less than 999.
If you
are
using
software such
to burn JPEG files
File
as
on a
".jpg"
CD-R,
or
them into the CD
If the files have
them
4/20
are
the folder should be
on
Some discs may be incompatible due to different
recording formats or the condition of the discs.
ed files have the
03.jpg
files, it
may take several minutes for the Recorder to read a
disc's content. If you don't see an On-Screen Display
after several minutes, some of the files are too big
copying
File
files.
---
source
by pressing INPUT repeatedly. If you want to return to
the Photo menu, press MENU/LIST.
On the Photo menu, press SKIP (. or >) to
move
multiple
menu.
ip
If you
list,
Use the MARKER button to select
".jpg"
names
"Easy
ensure
CD Creator"
that all select-
".jpeg" extension
layout.
".jpe" extensions, please
".jpeg" files.
before
rename
or
without the
".jpg"
cannot be read
by
this
files
as
JPEG
are
as
shown
or
".jpeg"
Recorder,
image
even
extension
though
the
files in Windows
Explorer .
90
90
Stop
Hide
39
PLAYBCK
Basic
Basic
Recording
from TV channels
Recording
Follow the instructions below to record
Recording
or
you
starts
stop the
Switch
1
immediately
recording.
TV program.
and continues until the disc is full
a
a
recordable
disc.
Also make
that the TV's
sure
input
source
is set to this
Set
a
1
Recording
allows you to make
Follow
steps 1-4
TV
a
recording mode as necessary by pressing
repeatedly. (HQ, SQ, LQ, EQ)
as
shown left
10 minutes within the available free space.
recording time is displayed on the TV screen.
The
Quality
At the end of the
stop recording and shut off.
recording,
the DVD Recorder will
Continue
TV Audio Channel
select the audio channel
to listen to
(language)
by pressing AUDIO while viewing a TV program
(Stereo, SAP, Mono). The current audio channel is displayed on-screen.
If the sound is of poor quality when set to Stereo,
you may often improve it by changing to Mono.
can
(Basic Recording
time
Use v / V buttons to select the TV channel to
Changing
recording
channels).
record.
You
a
preset length without using the program
(z) repeatedly to select the recordlength.
Recording starts after the first press. Each
additional press increases the recording time by
HQ; High Quality, SQ; Standard Quality, LQ: Low Quality,
3
a
from
2 ing
REC MODE
EQ: Extended
of
Press REC
Recorder. If you load a completely blank disc, the
Recorder takes a short while to initialize the disc.
2
Instant Timer
easily
Recording
timer.
the Recorder and load
on
Instant Timer
65Min Free
Instant Timer
Recording
Menu
?
4
Press REC
(z)
once.
Recording will start. (The
display window.)
Recording
REC indicator
continues until you press STOP
lights
in the
(x)
the
or
disc is full.
To record for
Recording
5
a
on
Press STOP
fixed
length
of
time,
see
Instant Timer
right.
(x)
to
(X)
to pause the disc
will be
recording,
displayed
recording
on
the TV
time. The
screen
press
select the channel to be viewed
display
window.
To Extend the
time
Recording
can
be extended
Time
anytime by
press-
by
Caution
If the Recorder is
lost.
during
a
Also, remaining time for the recording is shown in the
unplugged (or
recording,
while the Recorder is
To record one TV program while
watching another
for
moment.
during
recording.
2. When you want to continue
PAUSE/STEP (X).
to check the
Each additional press increases the recording time
10 minutes within the available free space.
Recording
1. Press PAUSE/STEP
40
recalled
(z)
setting
Time
Recording
once
recording
ing REC (z).
stop recording.
the
Press REC
The
To Pause the
Using the TV,
recording.
Checking
there is
the
a
power failure)
will be
recording
Timer
Recording
This DVD Recorder
be
can
to record up to
programmed
8 programs over a period of 1 month. For unattended
recording, the timer needs to be set with the channels to
be
the
recorded,
1
time and
starting
Programming
length.
Use v / V to select
?
Press ENTER to edit the selected program.
Timer Record menu appears.
?
Ch
Ch.
Date
Start Time
EndTime
Ch5
9/5 Fr
AM 10:20
AM 11:20
TIMER REC
Choose
Date
?
Start Time
?
End Time
?
Mode
AT
--
--
--
--
a
Ch.
Date
Duration
Mode
Check
Ch5
10/4 Sat
Start Time
10:20
am
60M
LQ
Rec. OK
Ch5
10/6 Mon
11:20
am
50M
HQ
Rec. OK
date up to 1 month in advance.
Set the
Set the
Choose
AT).
(Auto) mode
a
recording starting
recording ending
record mode
complete recording
Enter the
b / B
Edit
time.
time.
(HQ, SQ, LQ,
determines how much disc time
necessary
2 recording(s).
?
Timer Record List
SQ
Close
or
sary, to
?
Mode
Timer Rec List
is available and switches record
?
RECODING
the selected program
a
Choose
?
EQ,
remove
recording.
memorized program number, or
of the external inputs from which to record.
--
one
Press CLEAR to
timer
a
from the Timer Record List.
Enter
?
198Min Free
SQ
Timer Record
Press TIMER REC twice.
on.
?
will appear.
menu
Details
Recording
be checked whenever the DVD
can
Recorder is turned
Press TIMER REC.
The Timer Record
Timer
Reviewing
mode, if
Canceling
You
can
clear
the program.
a
Delete
Timer
timer
TIMER REC
Timer Rec
Close
Recording
setting anytime
before the record-
starts.
ing actually
?
neces-
a
CLEAR
Use v / V to select a program you want to remove
the Timer Recorder List. If you want to remove the
program, press CLEAR.
on
information for your timer
(left/right) moves the cursor left/right
v / V (up/down)
changes the setting at the current cursor position
Press RETURN (O) to exit the Timer Record
Timer
Stopping
a
After
recording
in
Recording
Progress
--
--
a
timer
has
started, you
can
still cancel
the program.
Press POWER.
?
menu.
?
Press ENTER after
filling
in all the program infor-
mation.
?
Press TIMER REC to
display
Timer Record List.
Even
?
To check the
?
programming,
will appear.
Check field's "Rec. OK"
indicates that the timer
correctly
and
a
the Timer Record List
(O)
on
the Timer Record List
recording
is
programmed
to exit the
Program
List.
Make sure that you load a recordable disc and
POWER to switch your unit to Standby.
5 press
?
?
There is
no
disc loaded.
Disc Protect is set to ON in the
lights in
standby with
?You must press POWER to
the
display
stop
the timer
The time
There
If two
Setup
menu
on.
already
99 titles recorded
on
the disc.
recording
if:
you're trying to set has already passed.
already 8 timer programs set.
are
or more
timer programs
overlap:
The earlier program takes priority.
After the earlier program finishes, the later program
starts.
?
recording.
are
?
window if the
the timer active.
There
?
?
The timer indicator
page 27).
Power is turned
Yo u cannot enter program for a timer
?Arecording is already underway.
otes
Recorder is in
the timer is set, the Recorder will not
?Anon-recordable disc is loaded.
?
?
though
(see
recordable disc is inserted.
Press RETURN
Recording Troubleshooting
record when:
Press ENTER, the program will be memorized
the DVD Recorder.
3 by
4
Timer
If two programs
are
set to start at
exactly
the
same
time, the program entered first takes priority.
If the disc is
damaged, the recording may not be
pleted successfully. In this case even though the
field shows "Rec.
OK", it may
com-
Check
not be.
41
from
Recording
from External
Recording
You
can
record from
camcorder
external
or
External
an
an
external A/V
VCR, connected
Input
Source
Components
Recording
device, such
You
as a
to any of the Recorder's
inputs.
can
from
record from
the DV IN
port
a
a
Digital Camcorder
digital camcorder connected
panel of this Recorder.
the Recorder's remote, you
Using
to
the front
on
can
control both the
Camcorder and this Recorder.
1
Make sure that the
component you
record from is connected
properly
want to
Before
to the DVD
DV IN
make
recording,
port
is set up
sure
(see
that the audio
input
for the
27).
page
Recorder. See page 19.
Press INPUT
2 input
repeatedly
to select the external
ips
to record from.
?T uner: Built-in tuner
?AV1: AUDIO IN 1 / VIDEO IN 1
on
?AV2: INPUT 2
(L/R),
front
AUDIO
back
panel
S-VIDEO
IN)
a
Some camcorders cannot be controlled
front
panel
signal
must be DVC-SD format.
recording
If you connect
cable,
REC MODE
mode
second DVD Recorder
a
Press REC
as
necessary
by
(The
REC indicator
lights
in the
(x)
the
1
2
Recording
on
Press STOP
fixed
or
length
of
time,
see
to
can
stop recording.
DV
the
a
DV
Digital Camcorder is connected
panel DV IN port. See page 19.
input
choose between Audio 1
is
as
require.
you
(original audio)
and
((over-dubbed audio).
Input is set from the DV Rec Audio in sub-menu
Setup menu. See DV Rec Audio on page 27 for
more
Instant Timer
page 40.
(x)
one.
component
port.
Check that the DV audio
You
disc is full.
a
a
Make sure your
to the front
?
continues until you press STOP
To record for
from
Audio 2
display window.)
Recording
remotely
repeatedly.
once.
will start.
DV
a
cassette.
Quality
(z)
using
you cannot control the second DVD from this
?You can't record date and time information from
HQ; High Quality, SQ; Standard Quality, LQ: Low Quality,
EQ: Extended
this
using
Recorder's remote.
?You can't control this unit
(HQ, SQ, LQ, EQ)
6
source
connected to the DV IN
the
5 Recording
?
?
on
recordable disc.
3
Select
4 pressing
The
on
panel
?D V: DV IN
Load
(VIDEO,
?
3
4
information.
Press INPUT
repeatedly
DV appears in the
Find the
display
place on the
recording
want to the
For best results, pause
you want to record.
ote
If your source is copy-protected using CopyGuard, you will not
be able to record it using this Recorder. See Copyright on page
10 for more details.
?
of
to select the DV
window and
on
the TV
input.
screen.
Camcorder tape that you
to start from.
playback
at the
point
from which
on your Camcorder, you can use this
Recorder's remote to control the Camcorder using the
Depending
STOP, PLAY and PAUSE functions.
5
Press REC
(z)
once
to start
recording.
automatically stopped if the
no signal.
?You can pause or stop the recording by pressing
PAUSE/STEP (X) or STOP (x). You cannot
?
Recording
is
Recorder detects
control the Camcorder from this Remote Control
during recording.
?
In Video
mode, the final frame of the recording
may remain
?
42
displayed on screen for a while after
recording stops.
For timer recording to work properly on this
Recorder, the Digital Camcorder must also be
switched on and be operating.
Recording
from
External
an
Input
Source
(Continued)
What is DV?
DV-Related
Using DV, also known as i.LINK, you can connect a
DV-equipped Camcorder to this Recorder using a single
DV cable for input and output of audio, video, data and
control signals.
You may see the following messages appear
TV screen when using the DV IN port.
The i.LINK interface is also known
"i.LINK" and the "i.LINK"
?
as
IEEE 1394-1995.
trademarks.
logo
only compatible with DV-format
(DVC-SD) camcorders. Digital Satellite Tuners,
PCs, and D-VHS Video Recorders are not compatiare
?You cannot connect
a
more
than
one
DVD
equip-
two
port (including
Recorders).
It may not be possible to always control the connected Camcorder via the DV IN port.
Digital
Camcorders
stereo
16-bit/48kHz,
can
or
usually
record audio
can
only
record
audio track. Set DV Rec Audio to Audio 1
one
or
or
the
source
component,
or
just
one
supports connection
to
Camcorder.
if the power fails in the
the DV cable becomes discon-
tape,
There is
no
cassette loaded into the connected
equip-
ment.
Uncontrollable device
This Recorder cannot control the Camcorder.
Information
Camcorder is
updating
information for DV.
Audio 2
required (see page 27).
Audio input to the DV IN port should be 32 or 48kHz
(not 44.1kHz).
Picture disturbance on the recording may occur if the
source component pauses playback or plays an
unrecorded section of
Too many devices connected
The DV IN port on this Recorder
Updating
stereo
as
or
Although DV Rec Audio is set to Audio 2 and Audio
signal is not present, DV Rec Audio will be reset to
Audio 1 automatically.
Camera mode
Camcorder is set to
2
camera
mode.
Troubleshooting
If you can't get a picture and/or audio through the DV IN
port, check the bullet points:
sure the DV cable is properly connected.
switching off the connected equipment then
switching back on.
?T ry switching the audio input.
?
nected.
?
properly,
Camcorder is switched off.
as
twin stereo tracks of 12-
bit/32kHz. This Recorder
?
Not connected to Camcorder
The Camcorder is not connected
Check the tape
ment connected via the DV IN
?
your
DV camcorder at
time to this Recorder.
?You cannot control this Recorder from external
?
on
This Recorder is
ble.
?
Messages
Make
?T ry
ote
Depending
on
the connected
be able to control it
using
Camcorder, you may not
the Remote Control supplied
with this Recorder.
43
RECODING
Title List and
the Title
Using
The Title
List Menu
Chapter
List-Original
VR
menu
ip
is where you build and edit your
and where you can delete titles and make other
List-Original
Playlist,
changes to the Original content of the disc. You can
also play individual titles directly from the Title ListOriginal menu.
The Recorder must be in Stop mode in order to edit
using the Title List-Original.
1
Press MENU/LIST
List-Original
?
display
1
the Title
next page if there
?To exit the Title
display
are more
the
2
previous/
the
detailed title information
Chapter List-Original
Press MENU/LIST
Title
List-Original
repeatedly
to
VR
menu
display
menu.
Use vVbBto choose the title you want to
Chapter List-Original menu then press
ENTER.
view the
Title
than 6 titles.
List-Original
more
for selected title.
Using
menu.
Use the v / V buttons to
RETURN
to
repeatedly
Press DISPLAY to show
the
List-Original options
appears
the left side of
on
menu.
menu, press
Use v / V to select
(O).
3 Original options
1/12
Title List
Original
'Chapter'
from Title List-
then press ENTER.
Chapter List-Original
menu
appears
the TV
on
screen.
DVD-RW
TITLE 1
HQ
1H 5M
TITLE 2
0:16:00
7/12
TITLE 3
0:35:00
9/12
0:30:00
10/12
Free
Chapter List
TITLE 1
7/12 Su
Original
30M56S
PR-01
1/9
TITLE 4
13/12
Select
2
To view Title
DISPLAY
16/12
Info
TITLE 6
0:10:00
LIST
19/12
0:15:00
Close
Playlist
List-Original options,
select the
title you want then press ENTER.
Title List-Original options appears on the left side of
the
3
TITLE 5
0:08:00
menu.
Select
To view
an
option
then press ENTER
Chapter List-Original options
side of the
Play:
Play
Starts
playback
for the
5
selected title.
Chapter
Chapter: Moves to Chapter
List-Original menu of the title.
(refer to right on this page)
Delete
Protect
Delete: Deletes the title.
Edit
51)
Playlist
Protect: Protects accidental
recording, editing or deleting
the title. (page 54)
Edit: Selects Edit
Use v / V to select
name.
Delete Part
?
Undo
?
Redo
a
Redo: Re-do the undo action.
(page 52)
Playlist: Adds the
Playlist. (page 50)
Press RETURN
(O) repeatedly
menu.
title to the
to exit the Title
of the
of the
menu
left
on
this
chapter.
page)
chapter.
(page 51)
Combine: Combines two
one.
chap-
(page 53)
Playlist: Adds the chapter
Playlist. (page 50)
part
(page 52)
?
playback
chapter.
Delete: Deletes the
Playlist
ters into
Undo: Un-do the last deletion.
then press ENTER
Starts
Original
(refer to
Combine
(page 51)
the left
Title: Moves to Title List-
Delete
options.
Delete Parts: Deletes
option
Play:
(page 52)
of the Title.
an
selected
?T itle Name: Edits the title
Title Name
on
to confirm.
Title
of
appears
menu.
Play
(page
select the
ENTER.
want
Use v / V to select
44
Close
Playlist
Chapter List-Original options,
4 chapter you
then press
to confirm.
4 List-Original
LIST
Press RETURN
6 List-Original
(O) repeatedly
menu.
to exit
to the
Chapter
Title List and
Using
1
the Title
?
repeatedly
display
the Title
menu.
Use the v / V buttons to
To exit the Title
the
Using
Press MENU/LIST
display
List-Playlist,
the
previous/
than 6 titles.
are more
want to
view
press RETURN
menu
ENTER.
(O).
1/12
Title List
Playlist
the
List-Playlist options
TITLE 1
7/12
TITLE 2
0:16:00
9/12
3 Playlist options
TITLE 3
0:35:00
10/12
0:30:00
Free
the left side of
on
appears
menu.
Use v / V to select
DVD-RW
1H 5M
the Title
to
repeatedly
display
1 List-Playlist
Use vVbBto choose the title you
2
then press
Chapter List-Playlist
Title
HQ
VR
Menu
Chapter List-Playlist
menu.
next page if there
?
to
(Continued)
VR
Menu
List-Playlist
Press MENU/LIST
List-Playlist
List Menu
Chapter
'Chapter'
from Title List-
then press ENTER.
Chapter List-Playlist
menu
appears
on
the TV
screen.
TITLE 4
13/12
TITLE 5
0:08:00
Select
DISPLAY
16/12
Info
LIST
TITLE 6
0:10:00
19/12
0:15:00
Chapter List
Close
Original
TITLE 1
7/12 Su
Playlist
30M56S
1/9
2
3
To view Title
List-Playlist options,
you want then press ENTER.
Title List-Playlist options appears
the menu.
Use v / V to select
an
option
on
select the title
the left side of
then press ENTER
Select
LIST
Close
Original
to confirm.
To
Play:
Play
Starts
playback
the
selected title.
Chapter
Title Name
5
List-Playlist
menu.
(page
51)
name.
(page 52)
Delete Part: Deletes
the Title.
Press RETURN
a
part of
(page 51)
(O) repeatedly
Use v / V to select
an
option
Play:
Play
menu
left
Combine
of the
on
List-Playlist
chapter. (refer to
page)
of the
this
Delete: Deletes the
chapter from
Chapter List-Playlist menu.
(page 51)
Move
the
to exit Title List-
Combine: Combines two
one.
chap-
(page 53)
Move: Moves a chapter of
Chapter List-Playlist menu to a
position on the menu. (page 53)
ip
display
playback
chapter.
Title: Moves to Title
Delete
ters into
more
the left
then press ENTER
Starts
selected
menu.
Press DISPLAY to
on
to confirm.
Title
Title Name: Edits the title
appears
menu.
Delete: Deletes the title from the
Title
Delete Part
4 Playlist
side of the
select the
ENTER.
want
Chapter List-Playlist options
Chapter: Moves to Chapter
List-Playlist menu of the title.
(refer to right on this page)
Delete
v iew
Chapter List-Playlist options,
4 chapter you
then press
detailed title information
for selected title.
Press RETURN
6 List-Playlist
(O) repeatedly
to exit
Chapter
menu.
45
EDITNG
Title List and
Chapter
the Title List
Using
From the Title List
display
Deleting
name, and
play,
can
(Continued)
Video
menu
you
List Menu
delete titles.
After
a
Video mode disc is
finalized, the Title List
and all you
Press MENU/LIST to
can
?
When
HQ
1H 5M
Free
12/11
0:20:15
TITLE 2
14/11
0:43:30
TITLE 3
18/11
0:33:00
TITLE 4
20/11
0:10:00
TITLE 5
23/11
0:15:00
TITLE 6
25/11
0:17:00
DISPLAY
time will not increase.
deleting a title from a DVD-RW disc, the
remaining time available for recording will only
Info
1
2
Close
Press MENU/LIST to
2
Title List
List
3
options
display.
title then press ENTER.
appears on the left side of the Title
a
an
option
3
display
Use v / V to select 'Delete' then press ENTER to
confirm.
pressing ENTER,
displayed.
then press ENTER
Title List
the new,
updated
title list is
to confirm.
Play:
Play
Title Name
Delete
Starts
playback
selected title.
Title Name
Title Name: Edits the title
Delete
name.
(page 52)
Delete: Deletes the title from the
Press RETURN
Play
of the
Title List.
4
the disc.
menu.
After
Use v / V to select
on
Use vVbBto choose a title you want to
delete then press ENTER.
Title List options appears on the left side of the Title
List
Use v / V to choose
DVD-R disc, the title will
List, but the available record-
Duration
TITLE 1
Select
delete titles recorded
a
increase if it is the last title
1/12
Date
can
Caution
If you delete a title from
disappear from the Title
Title List
Title
finalized, you
?
ing
DVD-RW
disc is
a
Video
screen
do is select
the Title List.
display
Title
the disc.
on
changes its appearance
titles to play.
1
Before
a
(O) repeatedly
to exit Title List.
Repeat steps
4 the
Title List.
2-3 to delete additional titles from
Press RETURN
(O) repeatedly
5 Title List display.
to remove the
ip
Press DISPLAY to
display
more
detailed title information
If the disc has
for selected title.
You should
already
see a screen
like the
been finalized
one
below.
Indicates total and current page number
Disc
name
Title list
DVD-RW
?
46
1/2
1
TITLE 1
12/11 0:30:21
2
TITLE 2
14/11 0:20:08
3
TITLE 3
18/11 1:10:03
4
TITLE 4
20/11 0:43:21
5
TITLE 5
23/11 0:15:21
6
TITLE 6
25/11 1:13:21
PAGE
UP
PAGE
DOWN
EXIT
Also you can exit the Title List
MENU/LIST.
Moves to the next
previous
or
page
Exits the Title List
display using
screen.
TITLE
or
Title List and
Using
List Menu
Chapter
the Title List
+RW
menu
ip
The Title List is where you can see the all recorded
titles, and where you can delete titles and make other
changes to the Original content of the disc. You
also play titles directly from the Title List menu.
The Recorder must be in Stop mode in order to
using the Title List menu.
1
Press MENU/LIST to
?
display
Use the v / V buttons to
edit
the Title List
display
the
display
menu.
previous/
(O).
Caution
If you press REC (z) after the Title List menu
appears, the selected title is erased then overwrte
recording
1
starts.
the
Using
2
DVD+RW
TITLE 1
TITLE 2
0:16:00
7/12
(See
page 56 for
List
Chapter
Press MENU/LIST to
more
+RW
menu
display
details.)
Title List
menu.
10/12
Use vVbBto choose the title you want to
Chapter List menu then press ENTER.
view
Title List
TITLE 3
0:35:00
9/12
0:30:00
Free
options
appears
on
the left side of the
menu.
Use v / V to select
TITLE 4
13/12
Select
2
detailed title information
more
for selected title.
1/12
Title List
Original
1H 5M
Press DISPLAY to
can
next page if there are more than 6 titles.
?To exit the Title List menu, press RETURN
HQ
(Continued)
To view Title List
TITLE 5
0:08:00
DISPLAY
Info
3 options
TITLE 6
0:10:00
16/12
19/12
REC
options,
0:15:00
Chapter
Close
Capter List
select the title you
'Chapter'
from Title List
then press ENTER.
List menu appears on the TV
TITLE 1
7/12 Su
screen.
30M56S
want then press ENTER.
Title List options appears on the left side of the
1/9
menu.
3
Use v / V to select
an
option
then press ENTER
to confirm.
Play:
Play
Full
Starts
playback
selected title
Play
Chapter
Full
Play:
Starts
the selected title
hidden
Protect
Chapter:
menu
on
chapters.
Moves to
Chapter List
(refer to right
Divide
Hide
5
Protect: Protects
against accidental recording, editing, or
deleting of the title. (page 54)
Edit: Selects Edit
Use v / V to select
name.
Play:
Combine
4
Press RETURN
(page 55)
Hide (Show): Hides (or
Shows) the all chapters
the title. (page 54)
(O) repeatedly
Starts
playback
chapter.
of the
Hide
chapter. (refer
page)
menu
to left
Combine: Combines two
ters into
Hide
one.
on
chap-
(page 53)
(Show): Hides (or Shows)
chapter. (page 54)
the selected
title into
6
two titles.
?
then press ENTER
of the
this
options.
one
chapter
Title: Moves to Title List
(page 52)
Divide: Divides
option
an
selected
?T itle Name: Edits the title
?
select the
options,
to confirm.
Title
(page 51)
List
menu.
Play
page)
Delete: Deletes the title.
Title Name
Chapter
Close
want then press ENTER.
Chapter List options appears on the left side of the
playback of
including the
of the title.
this
To view
4 you
chapters.
Delete
Edit
except
Select
of the
the hidden
Press RETURN
List
(O) repeatedly
to exit
Chapter
menu.
within
to exit Title List
menu.
47
EDITNG
Title List and
Using
List Menu
Chapter
the Title List
(Continued)
+R
menu
Using
The Title List is where you can see the all recorded
titles, and where you can delete titles and make other
changes to the Original content of the disc. You
also play titles directly from the Title List menu.
The Recorder must be in Stop mode in order to
using the Title List menu.
1
Press MENU/LIST to
?
Use the v / V buttons to
next page if there
the
display
Chapter
Press MENU/LIST to
List
+R
menu
Title List
display
menu.
can
edit
the Title List
display
1
the
2
Use vVbBto choose the title you want to
Chapter List menu then press ENTER.
view the
Title List
options
on
appear
the left side of the
menu.
menu.
Use v / V to select
3 options
previous/
Chapter
'Chapter'
from the Title List
then press ENTER.
List menu appears on the TV
screen.
than 6 titles.
are more
?To exit the Title List menu, press RETURN
(O).
Capter List
TITLE 1
7/12 Su
30M56S
1/6
Title List
Original
1/9
DVD+R
TITLE 1
HQ
1H 5M
7/12
TITLE 2
0:16:00
9/12
TITLE 3
0:35:00
10/12
0:10:00
-
0:30:00
Free
TITLE 4
13/12
Select
2
To view Title List
DISPLAY
16/12
Empty
-/-
-
Info
Select
Title
To view
Close
options,
select the title you
menu.
Use v / V to select
an
option
Full
then press ENTER
Play:
Starts
playback
selected title
Play
of the
except the hidden
chapters.
Full
Chapter
Chapter
Play:
Starts
hidden
Protect
5
Edit
this
on
Use v / V to select
against accirecording, editing, or
deleting of the title. (page 54)
Edit: Selects Edit
options.
?T itle Name: Edits the title
(page 52)
(Show): Hides (or
Shows) the all chapters
the title. (page 54)
name.
Press RETURN
Hide
(O) repeatedly
within
to exit Title List
menu.
ip
Press DISPLAY to
for selected title.
48
display
Starts
Play:
playback
chapter.
of the
selected
Title
Title: Moves to the Title List
Hide
of the
menu
left
on
this
chapter. (refer
page)
Combine: Combines two
Hide
one.
to
chap-
(page 53)
(Show): Hides (or Shows)
chapter. (page 54)
the selected
6
Protect: Protects
?
then press ENTER
page)
dental
Hide
option
Play
Chapter List
(refer to right
(page 51)
Divide
an
ters into
Delete: Deletes the title.
Title Name
chapter
to confirm.
Moves to
of the title.
select the
options,
menu.
chapters.
Chapter:
menu
playback of
including the
List
want then press ENTER.
Chapter List options appear on the left side of the
Combine
the selected title
Delete
4
4 you
to confirm.
Play
Close
1:38:00
want then press ENTER.
Title List options appears on the left side of the Title
List
3
TITLE 5
0:08:00
more
detailed title information
Press RETURN
List
menu.
(O) repeatedly
to exit
Chapter
Title and
Chapter Editing
Edits you make to the Original content change the actual content of the disc. For example, if you delete a title
or
chapter
that title
from the
Original
content
(Title
is deleted from the
Chapter),
disc, freeing up
or
chapter
recording time.
When you edit the Playlist, on the other hand, you are
not changing the content of the disc. For example,
when you delete a title from the Playlist, you are just
telling the Recorder not to play that title; nothing is actually deleted from the disc.
or
extra
original
content contain
titles. From the
are
+RW
chapter marker anywhere in a Playlist or
during recording or playback.
chapter is marked, you can use the Chapter
can
put
Original
title
Once the
Search
Chapter
+R
a
feature,
as
well
as
delete, combine and
move
chapters in the Chapter List-Original or Chapter ListPlaylist menu.
You can insert up to 999 chapter markers in both the
Original and Playlist contents.
ote
Chapter markers are inserted at regular intervals automatically. You can change this interval from the Initial
Setup menu (see Auto Chapter on page 27).
sections of
Original or
Playlist menu, you
can add or delete
a chapter or title to the
Playlist creates a new title made up of a section (ie.,
chapter) of an Original title. Deleting a part removes
part of a title from the Original or Playlist menu.
Playlist
You
one or more
chapters. When you insert a title into the Playlist, all the
chapters within that title also appear. In other words,
chapters in the Playlist behave exactly as chapters on a
DVD-Video disc do. Parts
VR
Markers
VR
Titles, Chapters, and Parts
Titles in the disc's
Adding Chapter
Original
parts. Adding
and
1
the title
Play
At the
(Original
or
Playlist).
you want to start
CHP ADD.
2 press point
A
chapter
?You
can
a new
chapter,
marker icon appears on the TV screen.
also put chapter markers in while recording.
Caution
?
When
editing using
tions, the
Delete, Add,
or
Move func-
exactly as
starting
ending points display.
During Playlist playback, you may notice a momen-
set in the
?
the
start and end frames may not be
and
tary pause between edits. This is
not
a
malfunction.
Changing
VR
Title Thumbnails
+RW
Thumbnail
+R
Each title displayed in the Title List menu is represented
by a thumbnail picture taken from the start of that title or
chapter.
If you prefer, select a different still picture from within a
title.
1
Play
the title
(Original
or
Playlist).
Press THUMBNAIL to make the
2 played picture
Original
The still
or
the
Playlist
one
currently
dis-
that appears in the
menu.
picture that you choose
Original or Playlist menu.
appears in both the
ip
You
change the thumbnail picture of the title on
Chapter List-Original or Chapter List-Playlist menu.
Select a chapter on the Chapter List-Original or Chapter
List-Playlist menu, then press THUMBNAIL. The thumbnail picture of the title that includes the chapter is
changed.
can
also
the
49
EDITNG
Title and
Making
Chapter Editing (Continued)
New
a
VR
Playlist
Use this function to add
an Original title or chapter to
Playlist. When you do this, the whole title is put into
the Playlist (you can delete bits you don't need later
see Deleting an Original or Playlist title/chapter on page
52).
the
Adding Additional Title/Chapters
Playlist VR
You
can
add
---
The title appears in the Playlist complete with the chapter markers that appeared on the Original. However, if
even
1
You
can
add up to 999
want to add
chapters
of
to
title,
chapter
title/chapter to the Playlist on this
1
a
one
use
the
disc
.
If you
Adding
only
2
a
title
to
title
display
menu.
Choose
an Original title or chapter to put into
Playlist, then press ENTER.
Original menu options appear on the left side of the
the
Play
page 44.
chapter on the Original menu
to put into the Playlist, then press ENTER.
Original (Title or Chapter) options appear on the left
side of the Original menu.
a
repeatedly
Playlist
screen.
repeatedly to display
List-Original menu.
If you want to display the Chapter List-Original
menu, refer to "Using the Chapter List-Original
Choose
List-Original
a
page.
Press MENU/LIST
on
Press MENU/LIST
Title
to
44.
Title
menu"
2
a
an Original title or chapter
already registered.
If you want to show the Chapter List-Original menu,
refer to "Using the Chapter List-Original" on page
you add more chapter markers to the Original later,
these are not automatically copied over into the Playlist
title.
if it is
to the
or
Chapter
Play
Delete
Title
Protect
Delete
Edit
Combine
Playlist
Playlist
Title
List-Original
Chapter List-Original
Play
Play
Delete
Title
Protect
Delete
Edit
Combine
Title
List-Original
Select
'Playlist'
new
chapters
50
Original
menu
Playlist.
New
Playlist
TITLE 1
TITLE 2
from
Original
Choose
4 tered
Playlist'
The title
Title
List-Playlist that is already registitle or chapter, then press
a
or
chapter
appears in the
updated Playlist
menu.
Playlist
then press ENTER.
title appears in the updated
of the title are added to the
a
to insert
ENTER.
Playlist.
New
The
Select
then press ENTER.
Select 'New
from
Chapter List-Original
Use v / V to select
3 options
'Playlist'
then press ENTER.
Playlist
Playlist
4
Use v / V to select
3 options
Chapter
Playlist.
Playlist.
All
Repeat steps 1-4 to
on the Playlist.
5
ter
6
back to the Title
Press RETURN
add additional title
or
chap-
(O) to exit, or MENU/LIST
List-Original menu.
to go
Title and
Deleting
VR
a
Chapter Editing (Continued)
Title/Chapter
+RW
Deleting
+R
If you erase a title or chapter from the Playlist menu on
DVD-RW discs formatted in VR mode, you only remove
it from the Playlist; the title/chapter remains in the
You
can
1
Title
VR
Part
a
delete
part which you do
a
Press MENU/LIST
List-Original
not want in the title.
repeatedly to display
Title List-Playlist menu.
or
2
or
Use vVbBto choose a title you want to
delete then press ENTER.
The options appears on the left side of the menu.
deleted from the disc and the
3
Select 'Delete Part' from the
Original
menu.
If you choose to delete a title or chapter from Title List
Chapter List menu, the title or chapter is actually
remaining time available
for recording increases. Titles/chapters deleted from the
Original are also removed from the Playlist.
options
on
the
menu.
e.g., If you select "Delete Part"
Original
on
the Title List-
menu.
ote
It may not be possible to delete
than 5 seconds long.
1
On the Title List
bBto choose
chapters
Chapter
chapter or
or
a
that
Select 'Delete' from the
on
Title Name
on
the Title
Delete Part
Delete
List menu, use vV
title you want to
options
e.g., If you select "Delete"
Play
less
Chapter
delete then press ENTER.
Options appears on the left side of the
2
are
Undo
Protect
Redo
Edit
screen.
the
Playlist
menu.
List-Original
menu.
4
Press ENTER.
Title Edit
(Delete Part)
menu
appears
on
the TV
screen.
'Start' icon is
Play
Title Edit
highlighted.
TITLE 1
-Delete Part
20/8 00:35:42
Chapter
Delete
Protect
Start
Edit
End
0:00:00.00
Cancel
Done
Playlist
Select
Starts
Move Point
playback
5 slow-motion
Press ENTER to confirm.
3
The confirm message for
4
The selected
pressing ENTER,
displayed.
6
6
will appear.
Use b / B to select 'Yes' then press ENTER.
chapter or title is deleted.
After
5
deleting
Repeat steps
1
-
the new,
updated
menu
7
4 to continue to delete from the
8
menu.
Press RETURN
(O) repeatedly
to exit the
9
When DVD+RW
changed
?
pause step, search and
use
starting point.
of the section
starting point
you want to delete.
'End' icon is highlighted.
part is indicated
on
the
Use pause step, search,
to find the
Progress
skip
Bar.
and slow-motion
ending point.
Press ENTER at the
ending point
you want to delete.
You can cancel the selected
point,
of the section
v / V to
use
select 'Cancel' icon then press ENTER.
menu.
ote
?
Press ENTER at the
The
is
and
to find the
recording,
the deleted title's
name
is
After you finish editing, select the 'Done' icon
then press ENTER.
The confirm message for
deleting
will appear.
to 'Deleted Title'.
If the deleted titles
combined into
one.
are more
than two, the titles
are
10Use
b / B to select 'Yes' then press ENTER.
The selected
List-Original
part is deleted from the title and Title
or
Title
List-Playlist
menu
appears.
51
EDITNG
Title and
Chapter Editing (Continued)
Undoing/Redoing
VR
the Last Deletion
If you make a mistake while deleting, you can undo it.
There is one level of undo (in other words, you can
undo the last
1
one
deletion you
Naming
You
made).
Select 'Undo' from the Title
List-Original
Chapter List-Original
then press ENTER.
menu
1
or
It doesn't matter whether you are currently in the
Title List-Original or Chapter List-Original menu; the
last deletion is undone.
can name
32 characters
on
the Title
List-Original
menu
be up to
option
then
on
the Title List-
menu.
Play
Title Name
Chapter
Delete Part
Delete Part
Delete
Delete
Undo
Undo
Protect
Protect
Redo
Redo
Edit
Edit
Playlist
Playlist
otes
recording.
anything after ejecting the disc from
or switching the Recorder into standby
a
3
You can't undo
the Recorder
can
appears.
e.g., If you select "Title Name"
Title Name
You can't undo
Names
ENTER.
Original
Chapter
independently.
+R
long.
Use v/V to select the 'Title Name'
2 press
menu.
Play
titles
+RW
Video
On the Title List menu, use vVbBto choose
the title you want to name then press ENTER.
Options appears on the left side of the menu.
Keyboard
e.g., If you select "Undo"
VR
Title
a
Enter
for the title. Use vVbBto select
a name
character then press ENTER to confirm your
selection. Refer to step 5 as shown on page 28
a
(Disc Label).
mode.
You
can
still undo
a
deletion
even
after
exiting
TITLE 1
the
ip
You
6
Alphabet Capital
display.
menu
(1.6)
123456789
0
ABCDEFGH
J
I
KLMNOPQRST
can
redo the last undo action
using the 'Redo'
List-Original or
options then press
UVWXYZ
Select 'Redo' from the Title
option.
Chapter List-Original
menu
OK
ENTER.
Cancel
Space
Delete
Choose OK then press ENTER to save the
return to the previous menu display.
4 and
5
Press RETURN
(O) repeatedly
name
to exit the
menu.
otes
?
?
?
Names
can be up to 32 characters long.
For discs formatted on a different DVD Recorder, you
will see only a limited character set.
When
recording
on
discs, the entered
player only
52
DVD-R, DVD+R
name
is
displayed
after finalization.
or
DVD+RW
on
the DVD
Title and
Combining
VR
Chapter Editing (Continued)
Two
+RW
Chapters
Use this function to combine two
Original chapters
Into One
Moving
+R
into
adjacent Playlist
or
one.
Use this function to re-arrange the playing order of the
Playlist chapters on the Title List-Playlist menu.
1
Press MENU/LIST
repeatedly
to
only
one
chapter
display
List-Playlist
display the Chapter List-Playlist
"Using the Chapter List-Playlist" on
Title
menu.
To
ote
This function is not available if there is
VR
Playlist Chapter
a
menu, refer to
page 45.
within the title.
1
ote
On the
Chapter List menu, select the second
chapter of the two chapters you want to combine then press ENTER.
Chapter List options appear
on
This function is not available if there is
Chapter List
the left side of the
TITLE 1
7/12 Su
Playlist
only
1/9
Use v / V to select 'Combine'.
The combine indicator appears between the two
chapters you want to combine.
e.g., If you select "Combine"
Original
on
the
Chapter
List-
Select
LIST
Close
Original
menu.
2
Play
Title
Select
a
chapter
from the
Chapter List-Playlist
menu.
Press ENTER.
3 Chapter List-Playlist options
Delete
of the
Combine
appear
Use v / V to select 'Move' from
Press ENTER to confirm.
After
pressing ENTER,
played.
the
updated
menu
on
the left side
menu.
4 options then press
Playlist
3
chapter.
30M56S
menu.
2
one
Playlist
ENTER.
Play
is dis-
Title
Delete
Combine
Move
5
Use vVbBto choose the
place you want to
chapter to then press ENTER.
pressing ENTER, updated menu is displayed.
move
After
the
53
EDITNG
Title and
Protect
a
Chapter Editing (Continued)
Use this function to
editing
1
2
3
or
VR
Title
deleting
+RW
+R
Hide
protect against accidental recording,
of the title.
Press MENU/LIST to
Use vVbBto choose
a
the Title List
Chapter
1
screen.
options.
List
2
or
Full
Chapter
or
chapter
you
screen.
on
the Title List
menu.
Play
Delete
Protect
Press ENTER to confirm.
on
the title's thumbnail.
3
Title Name
Protect
Divide
Edit
Hide
Edit
Press ENTER to confirm.
The title's thumbnail will dim.
ip
ip
If you select a title that has already been protected on
the Title List menu, you can 'unprotect' it by choosing
"Protect" from the Title List menu options. After doing
54
title
Chapter
Delete
that, you
a
Play
Play
The lock mark will appears
the Title List
options.
e.g., If you select "Hide"
Full
on
List menu,
Chapter
vVbBto choose
Select ''Hide' from the
Play
4
title/chapter
menu.
On the Title List
use
a
+R
want to hide then press ENTER.
Options appear on the left side of the
title you want to pro-
tect then press ENTER.
Options appear on the left side of the
Select 'Protect' from the
menu.
+RW
Title/Chapter
Use this function to hide
or
display
a
can
edit and delete the title.
If you select
a
title that is
already
dim
on
the Title List
menu, you can 'show' it by choosing "Show" from the
Title List menu options. After doing that, you are able to
see
the title.
Title and
Chapter Editing (Continued)
Dividing One
+RW
Title Into Two
Use this command to
split
a
title up into two
new
titles.
On the Title List menu, select a title you want to
divide then press ENTER.
The menu options appears on the left side of the
1
EDITNG
screen.
2
Select 'Divide' from the Title List
menu
options.
Play
Full
Play
Chapter
Delete
Title Name
Protect
Divide
Edit
Hide
Press ENTER after the 'Divide'
3 lighted.
Title Edit-Divide
menu
option
is
high-
appears and goes into STOP
mode.
Current
Title Edit
-
Divide
picture
TITLE 1
20/8 00:35:42
The first title's
thumbnail
#1
Thumbnail
The second title's
thumbnail
Divide
0:00:00.00
Cancel
Select
Done
4
5
Move Point
Use pause step, search,
to find the
point
When the 'Divide'
ENTER at that
You
option
point.
can remove
skip
and slow-motion
you want to divide the title.
the
is
highlighted, press
dividing point
and exit the Title
Edit-Divide menu, use v / V to select 'Cancel'
option then press ENTER. The division point is
removed.
6
Choose 'Done'
the
option
dividing point.
then press ENTER to fix
The title is divided into two
new
titles. It take up to
4 minutes to divide.
55
Addition Information
You
VR
Video
Clean-up Recordings
+RW
simply clean-up (erase) all the contents from
recording from the first section of the
The disc format is not changed.
can
disc.
1
2
Turn
the Recorder and load
on
a
a
recordable
+RW
You
(z)
button for
on
the TV
screen.
1
2
Delete all title and record?
No
Yes
player
displayed on
capable of playing
menu
that is
the
DVD+RW
than 3
more
seconds.
The message below will appear
view the Title List
can
DVD+R discs.
or
Press and hold REC
+R
another DVD
disc.
displayed
or Players
menu
other DVD Recorders
on
disc then start
Title List
Viewing
Insert DVD+R
or
DVD+RW disc recorded
already.
Press TITLE
press and hold MENU/LIST butStop mode.
or
ton for three seconds in
Title List
Use b / B to select "Yes" then press ENTER.
will start. (The REC indicator lights in
You
the
STOP
will appear
menu
as
shown below.
ip
3 Recording
display window.)
the Title List
can remove
menu
by pressing
(x).
DVD+RW
Title List
+RW
Overwriting Recording
To overwrite
video
a new
recording
on a
TITLE 1
previously
TITLE 2
0:16:00
7/12
TITLE 3
0:35:00
9/12
0:30:00
10/12
recorded
title, follow these steps. This feature is not
available for DVD+Rs, that always record at the end of
TITLE 4
the Disc.
1
2
Select
input
you want to record
source
TITLE 6
0:10:00
16/12
19/12
0:15:00
1/2
(TV
channel, AV1-2, DV).
Press MENU/LIST to
the Title List
display
menu.
To
TITLE 1
1H 5M
7/12
TITLE 2
0:16:00
TITLE 3
0:35:00
9/12
0:30:00
10/12
Free
Most
TITLE 4
13/12
Select
TITLE 5
0:08:00
DISPLAY
16/12
Info
0:10:00
write.
4
Overwrite
19/12
0:15:00
REC
title, select the title you
or
title you want to
over-
want
(PLAY).
DVD
players
(z) to start overwrite recording.
recording starts from the start point of
Check the manual that
came
Finalizing
the
(x)
to
stop the overwrite recording.
title is created and
updated
menu
play
is dis-
played.
DVD
finalized discs
players
or
can
also
mode, finalized
with the other
play
or
not.
player
to
play.
'saves' the
that the disc
can
be
recordings and editings in place so
played on a regular DVD player or
computer equipped with
Press STOP
can
mode, finalized DVD+R
check what formats of discs it will
title.
new
N
DVD-RW discs recorded in VR
Press REC
The
a
DVD+RWs. A small number of
Close
a
regular
recorded in Video
TITLE 6
Use vVbBto choose
3
back
play
then press ENTER
Playing Your Recordings on Other
Players (Finalizing a Disc)
DVD+RW
HQ
3
1/12
Title List
5
TITLE 5
0:08:00
13/12
a
To finalize
suitable DVD-ROM drive.
Video mode disc creates
Finalizing
navigating the disc. The
pressing MENU/LIST or
a
a
menu can
a menu screen
be accessed
for
by
TITLE.
disc, refer
to "Finalize"
on
page 28.
otes
This function is not available for
If the overwrite is
longer
a
protected title.
recording length
than the
of the current
title, the next title is overwritten.
But if next title is protected, the overwriting stops
starting point of the title.
selected title's recording length
at the
If the
seconds, the
title is
56
is less than 10
playable
on
regular
DVD
players.
The edited contents of
a DVD+RW disc is compatible
regular DVD players only after finalization.
Any edited contents of the DVD+R disc are not
compatible on regular DVD players. (Hide, chapter
combine, added chapter mark, etc.)
on
next title is overwritten. But if the next
protected, overwriting stops.
otes
Unfinalized DVD+RW is
Language Code
Enter the
(See
appropriate
23).
List
code number for the initial
settings
"Disc
Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Amharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Romanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faeroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
REF NC
57
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country
Code"
(See
page
26).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
El Salvador
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
BB
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
AN
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Barbuda
Georgia
& S. Sandwich
(USA)
Mayen
Islands
Republic
Principe
French Southern
Te rritories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
Coast
IN
India
NU
Niue
IO
British Indian Ocean
NZ
New Zealand
US
United States
Uruguay
Kingdom
Outlying
CI
Ivory
CK
Cook Islands
CL
Chile
Territory
OM
Oman
UY
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
JP
Japan
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
Saint Pierre and
VN
Vietnam
Cyprus
KG
Kenya
Kyrgyzstan
PM
CY
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DE
Verde
Anguilla
Islands
Miquelon
City
Grenadines
Islands
Islands
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
58
Republic
Islands
(French)
State
(British)
(USA)
Controlling
You
can
Your TV with the
control the sound
level, input
power switch of your LG TV with the
source, and
supplied
remote.
Controlling
You
You
can
control your TV
using
Remote
Supplied
the buttons below.
can
other TVs with the remote
control the sound
level, input
source, and
power switch of non-LG TVs as well. If your TV is listed
in the table below, set the appropriate manufacturer
code.
1.
While
holding down TV POWER button, press
the number buttons to select the manufacturer
code for your TV
2.
the table
(see
below).
Release TV POWER button.
Code numbers of controllable TVs
TV Control
Buttons
If
more
them
than
one
at
one
code number is
listed, try entering
time until you find the
a
one
that works with
your TV.
By pressing
You
POWER
Turn the TV
INPUT
can
Switch the TV's
off.
input
source
input
sources.
Adjust
MUTE
Temporarily
press again
1
Zenith
1,3,4
Samsung
6,7
(Default),
Sony
8,9
Hitachi
4
2
the sound level of the TV.
turn TV sound
Depending
on
function
the
on
your TV,
TV,
some or
even
after
all buttons may not
entering
the correct
manufacturer code.
If you enter
a new
code
number, the code number
previously entered will be erased.
After you replace the batteries in the remote,
Scan up or down through
memorized channels.
VOL +/--
Code Number
LG / GoldStar
otes
on or
between the TV and other
CH +/--
Manufacturer
the code
number you have set may be reset to the default
setting. Re-enter the appropriate code number again.
OFF,
to restore.
59
REF NC
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
service.
Solution
Cause
Symptom
No power.
The power cord is disconnected.
Plug the power
securely.
No
The TV is not set to receive DVD
Select the
Recorder
on
picture.
signal output.
the TV
cord into the wall outlet
appropriate video input mode
the picture from the DVD
so
Recorder appears
The video cable is not connected
the TV
on
Connect the video cable
screen.
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The
Select the correct
connected with the
equipment
cable(s) is not set
Recorder signal output.
audio
The audio cables
to receive DVD
not connected
are
the TV.
on
mode on the
you can listen to the
sound from the DVD Recorder.
Audio Receiver
input
so
Connect the audio cable
securely.
securely.
The power of the equipment connected
with the audio cable is turned off.
The audio
The
playback picture
is
connecting
The disc is
cord is
damaged.
Turn
the
on
connected with
equipment
the audio cable.
it with
Replace
new one.
Clean the disc.
dirty.
poor.
The DVD Recorder
does not start
No disc is inserted.
Insert
a
disc.
cator in the
playback.
An
unplayable
disc is inserted.
Insert
a
(Check that the disc
display window is lit.)
disc.
playable
(Check
indi-
the disc
type, color system, and regional code.)
The disc is
placed upside
down.
Place the disc with the
playback
side
down.
The disc is not
placed
within the
guide.
Place the disc
inside the
The disc is
dirty.
The
level is set.
Rating
picture from the
input is distort-
external
The video
Cancel the
from the external
signal
com-
ponent is copy-protected.
Some channels
over
are
Those channels
are
not stored in the
Recorder.
when
tray correctly
rating
Rating
function
or
change
level.
You cannot connect via this Recorder.
Connect the
component directly
to your
TV.
ed
skipped
the disc
Clean the disc.
the
The
on
guide.
Restore channels. See "To Add
Channels from
Memory"
on
or Erase
page 21.
usingv/V.
picture or sound of
broadcasting channel is
weak or missing.
Antenna
Camcorder
Camcorder is off.
The
image
is not
image
via
or
cables
are
loose.
Camcorder
input
or
DV IN to
DVD Recorder is not
shown
60
on
TV
connections
Turn camcorder
on
or
and
replace
cable.
operate
properly.
shown.
A/V
Tighten
screen.
DVD Recorder INPUT SELECT is
Use INPUT to select
incorrect.
(AV1, AV2, DV, etc.)
input
channel
Troubleshooting (Continued)
Can't
The disc
play a disc
using this
recorded
Recorder
on
Solution
Cause
Symptom
Some
another
was
recorded in Video mode.
Finalize the disc.
will not
No solution.
players
play
final-
even a
(page 28)
ized disc recorded in Video mode.
player.
The disc
was
recorded in VR
The other
mode,
player must
play it.
be RW
compati-
ble in order to
Discs recorded with copy-once material
played on other players.
No solution.
The
Use another disc.
cannot be
Cannot record
not record
or
did
successfully.
remaining
blank space
The
source
copy
you
are
to record is
trying
setting
the
channel is tuned
When
to
recording
is not
the
recording channel,
on
a
the TV's
own
Video mode
programs that are copy-once
cannot be recorded.
recording
possible.
tuner.
cor-
rect time.
programmed
Timer record indicator
appear after
TV is not
is not
present.
the Recorder's
light does
programming timer.
not
on
built-in TV tuner.
a
once
VR mode formatted disc for copy-
material.
Set clock to correct time. See "Clock
page 21.
on
Reprogram
Recording"
incorrectly.
Playback
Select the channel
Set"
Timer has been
and/or
source.
Use
disc,
protected
Clock in DVD Recorder is not set to
Stereo Audio Record
You cannot record the
protected.
When
Timer
the disc
on
is insufficient.
Reprogram
Stereo-compatible.
No solution.
Broadcast program is not in stereo for-
No solution.
Timer. See "Timer
page 41.
on
Timer.
mat.
DVD Recorder A/V Out
connected to TV A/V In
jacks are
jacks.
Make A/V connections. Stereo is
not
available
only
via A/V
output from DVD
Recorder.
DVD Recorder Audio/Video Out is not
selected for
viewing
Select AUX
or
A/V
source as
TV
input.
at the TV.
DVD Recorder's TV audio channel is set
Set TV audio channel mode to Stereo.
to
See
mono.
"Changing
TV audio channel"
on
page 40.
The Remote Control
The Remote Control is not
does not work
remote
properly.
sensor on
pointed
at the
the DVD Recorder.
Point the Remote Control at the remote
sensor on
The Remote Control is too far from the
Operate
the DVD Recorder.
the Remote Control within 7
m.
DVD Recorder.
There is
an
obstacle in the
path
of the
Remove the obstacle.
Remote Control and the DVD Recorder.
The batteries in the Remote Control
are
Replace
the batteries with
new ones.
exhausted.
Moisture Condensation
Moisture condensation
?
If the DVD Recorder is moved from
warm
In locations where moisture condensation may
can occur:
a
cold
place
to
a
?
Keep
the DVD Recorder
plugged
outlet with POWER On. This will
place.
into
an
occur:
AC power
conden-
help prevent
sation.
?
Under
extremely
humid conditions.
?
If condensation has
DVD Recorder to
occurred, wait
dry
before
using
a
few hours for the
it.
61
REF NC
Specifications
General
Power
AC
Power
30W
requirements
consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Television
110-240V, 50/60 Hz
430 X 76 X 383 inches
5.5
(w
x
h
d)
x
Kg
5˚C to 35˚C
5 % to 90 %
NTSC color
system
Recording
format
NTSC
Recording
format
DVD Video
system
Recording
Recordable discs
Recording,
DVD-VIDEO
DVD-ReWritable, DVD-Recordable, DVD+ReWritable, DVD+Recordable
Recordable time
Approx.
6 hours
recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
1 hour (HQ mode),
(EQ mode)
2 hours
(SQ mode),
4 hours
(LQ mode),
Video
27MHz
MPEG 2
48kHz
Dolby Digital
Playback
Frequency
DVD
(PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to
DVD(PCM96kHz):8Hzto44kHz
More than 100 dB (AUDIO OUT connector)
Less than 0.008% THD (AUDIO OUT connector)
More than 95 dB (AUDIO OUT connector)
response
Signal-to-noise
ratio
Harmonic distortion
Dynamic
range
20 kHz
Inputs
ANTENNA IN
Antenna
VIDEO IN
input,
75 ohms
AUDIO IN
0
ohms, sync negative, RCA jack x 2
dBm more than 47 kohms, RCA jack (L, R) x 2
DV IN
4
pin (i.LINK/IEEE
1.0
Vp-p
75
1394
standard)
Outputs
VIDEO OUT
1 Vp-p 75 Ω, sync negative, RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin
(C) 0.286 V (p-p) 75 Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
0.5 V (p-p), 75 Ω, RCA jack x 1
3 V (p-p), 75 Ω, Optical connector x 1
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
S-VIDEO OUT
COMPONENT VIDEO OUT
Audio
output (digital audio)
output (optical audio)
Audio output (analog audio)
Audio
x
1
Accessories:
VideoCable.............................1
AudioCables(L,R)...............1
RFCoaxialCable.........................1
RemoteControl..................1
Batteries...............................2
Design
and
specifications
are
subject
Manufactured under license from
marks of
Dolby
DTS and DTS
to
Dolby
change
without notice.
Laboratories.
"Dolby",
"Pro
Logic"
and the double-D
symbol
Digital
Out
are
registered
trademarks of
Digital
Theater
Systems,
trade-
Inc.
P/NO
62
are
Laboratories.
:
3834RD0033N
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement