Philips widescreen flat TV 32PF5331/10 User manual

Country
Austria
Belgium
Denmark
Finland
France
Germany
Greece
Ireland
Italy
Luxemburg
Netherlands
Norway
Portugal
Spain
Sweden
Switzerland
UK
Number
0820 901114
070 222 303
3525 8759
09 2311 3415
08 9165 0005
0180 5 356 767
0 0800 3122 1280
01 601 1777
199 404 041
40 6661 5644
0900 8407
2270 8111
2 1359 1442
902 888 784
08 5792 9100
0844 800 544
0906 1010 016
Tariff
€0.20/min
€0.17/min
local
local
€0.23/min
€0.12/min
free
local
€0.25/min
local
€0.20/min
local
local
€0.15/min
local
local
£0.15/min
Introduction
Thank you for purchasing this television set.
This handbook has been designed to help you install and operate your TV set.
We strongly recommend that you read it thoroughly.
Table of Contents
Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Preparation / Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Television keys and connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Remote Control keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Remote Control keys (Other functions) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Quick installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Programme sort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Auto store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Manual store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Naming of channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Picture and Sound settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Using the Contrast+ and NR (Noise Reduction) features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Timer function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using the PIP (Picture-in-Picture) feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Screen Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using the Smart Picture and Sound features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using the Active Control feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Using the TV as PC monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Using the TV in HD (High Definition) Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Reference table of Countries available for selection. . . . . . . . . . . . . . . . . . . . . . . . . . 19
Recycling
The packaging of this product is intended to be recycled. Apply to the local authorities
for correct disposal.
Disposal of your old product
Your product is designed and manufactured with highly quality material and components,
which can be recycled and reused. When this crossed-out wheeled bin symbol is attached
to a product, it means the product is covered by the European Directive 2002/976/EC.
Please inform yourself about the local separate collection system for electrical and
electronic products.
Please act according to your local rules and do not dispose of your old products with your
normal household waste. The correct disposal of your product will help prevent potential
negative consequences for the environment and human health.
Safety Information
10 cm
10 cm
10 cm
X
Leave at least 10 cm around each side of the
TV set to allow for proper ventilation. Place
the set on a stable, level surface. Never cover
the ventilation slots of the TV with a cloth or
other material. It may cause overheating. Do not
insert anything in the ventilation holes. If metal
or something flammable is inserted in these
holes, it may result in fire or electric shock.
When cleaning the surface or the screen of the
set, wipe gently with absorbent cotton or cloth
or other soft material like chamois. Do not use
too wet a cloth which is dripping with water.
Do not use acetone, toulene or alcohol to
clean the TV. As a safety precaution, unplug the
power cord from the mains.
X
X
Take care not to connect too many equipment
to the same mains socket as it may cause
overloading resulting in fire or electric shock.
Pull the power lead by the plug. Do not pull on
the power lead. Do not use a poor fitting mains
socket. Insert the plug fully into the mains. If it is
loose, it may cause arching and result in fire.
X
X
To prevent fire or shock hazard, do not expose
your TV to rain or moisture.
No naked flame sources (lighted candles) should
be placed on the top of the set or near it.
X
Avoid placing your TV set under direct sunlight
or heat.
As a safety precaution, do not touch any part of
the TV, power lead or aerial lead during lightning
storms.
X
Installation of the TV set on the wall should be
carried out by qualified serviceman. Improper
and incorrect installation may render the set
unsafe.
Avoid placing vase filled with water on the TV.
Water spilled into the set could result in electric
shock. Do not operate set if water is spilled into
it. Have it checked immediately by a qualified
serviceman.
Preparation / Getting started
1 Positioning the TV set
3 Using the Remote Control
10 cm
10 cm
10 cm
Pull out the plastic insulation sheet from the
battery to enable the remote control to operate.
Place your TV set on a solid stable surface,
leaving a space of at 10 cm around the set.
4 Switching on the TV set
.
–
–
2 Connections
• Insert the aerial plug into the 75Ω :
socket at the bottom of the set.
• Insert the mains plug into a wall socket
(220-240V / 50/60Hz).
• To switch on the TV set, press the POWER
button. A green indicator comes on and the
screen lights up.
• If the TV set remains in standby mode (red
indicator), press the PROGRAM – / + key on
the keyboard or the P – / + key on the
remote control.
NOTE
For more details on other
connections, see
“CONNECTION GUIDE”.
Television keys and connectors
11
–
4
Headphone
3
R
Audio In
AUDIO
IN
L
S-Video
S-VIDEO
–
2
Video In
VIDEO
IN
.
1
EXT3/SVHS3
7
6
EXT 4
5
AUDIO R
IN
L
HDMI 2
R
L
Pr
Pb
Y
HDMI 1
DVI
(AUDIO IN)
EXT 2 /SVHS2
EXT 1
AC in ~
8
1 POWER . : to switch the TV on and off.
2 VOLUME –/+: to adjust sound level.
3 MENU : to access or close menus.
The PROGRAM /CHANNEL –/+ keys can
be used to select a menu item and the
VOLUME –/+ keys to enter into the selected
menu item and make adjustments.
4 PROGRAM / CHANNEL –/+ : to select
programmes.
5 POWER socket : Insert the mains plug into
a wall socket.
6 DVI Audio Input : for connecting a HD (high
definition) equipment or computer with DVI
output.
7 Component Video inputs / Audio Inputs :
to connect to equipment like DVD, Set-Top
box which have the same sockets. Connect the
audio inputs of the TV to the outputs of the
device together with the Component Video
Inputs.
9
10
8 HDMI 1 /HDMI 2 sockets : to connect to
set-top boxes, DVD player/recorder, High
Definition equipment or Personal Computer.
9 EXT1 and EXT2/SVHS2 sockets : connect to
equipment like DVD player/recorder, VCR,
Decorder which have scart connections.
Important : In order to connect your
decoder, please use EXT1 scart only.
10 TV Aerial socket : Insert the aerial plug into
the 75 Ω : socket .
11 Side / EXT3 / SVHS3 connections : for
connecting to devices like camera or
camcorder. Also allows you to connect your
headphone for your personal listening pleasure.
NOTE
For more details on connections,
see CONNECTION GUIDE.
Remote Control keys
7 Active Control
(See page 13).
8 MENU
1
2
3
4
5
6
7
8
9
To call up or exit the TV menus.
AUX
15
16
17
18
19
20
10
21
11
22
12
13
14
23
1 Standby
To set the TV to standby mode. To switch the
TV set on again, press
,
,
to
P – / + or AV key.
2 Unused key in TV mode
.
3 DVD / AUX (see page 6).
4 Surround Sound
To activate / deactivate the surround sound
effect. In stereo, this gives the impression that
the speakers are further apart. For models
equipped with Virtual Dolby Surround, you can
experience Dolby Surround Pro Logic sound
effects.
5 Telextext keys (see page 14).
6 AV
To display Source List to select TV or peripheral
equipment connected to EXT 1, EXT 2/SVHS2,
EXT 3/SVHS3, EXT 4, HDMI 1 or HDMI 2.
9 Cursors
These 4 keys are used for selection and adjustment
of menu items.
10 OK
Confirms selection.
11 Volume ( – VOL + )
To adjust the sound level.
12 Smart Picture /Sound
Used to access a series of predefined picture
and sound settings (see page 13).
13 / Numerical keys
For direct access to programmes. For a 2
digit programme number, the 2nd digit must
be entered before the dash disappears.
14 Screen information
To display/remove the programme number,
the sound mode, the remaining time of the
sleeptimer and the *signal strength indicator.
Press key for more than 5 seconds to display
information permanently on screen and press
key again for more than 5 seconds to remove
information.
15 Mode
Select between TV, DVD and AUX mode (see
“Remote Control - DVD or AUX on page 6).
16 Programme List
To display / clear the list of programmes.
Use the Î ï keys to select a programme and
the Æ key to display it.
17 Picture-in-Picture
To display a PIP window on the TV screen (see
page 10 on how to use the PIP feature).
18 Sound mode
Used to force programmes in Stereo
and Nicam Stereo to Mono or, for
bilingual programmes, to choose between
Dualå or Dual». The Mono indication is red
when in forced position.
(see page 12).
19 Screen Format
20 DVD / AUX (see page 6).
21 Mute
Press to mute or restore sound.
22 Selecting TV programmes (P – / +)
To select the next or previous programme.
The number and the sound mode
are displayed for a few seconds. For some
TV programmes, the title of the programme appears
at the bottom of the screen.
23 Previous/Present programme
To alternate between the last viewed and
present programme.
* The signal strength indicator shows
the signal strength of the transmission
of the programme you are watching.
Remote Control keys (DVD or AUX)
The remote control also allows you to control the main functions of some Philips DVD models
NOTE : Functions not available to Philips DVD-R device.
Press the
key to select the required mode: DVD or AUX.
The remote control indicator lights up to display the selected mode. It switches off automatically
after 20 seconds if left idle. The mode automatically returns to TV mode.
The following buttons are operational, depending on the equipment:
standby
pause
fast rewind
display and exit menu
stop
programme selection
play
navigation and adjustments,
confirms selection
fast forward
record
to
digit keys
Quick Installation
When you switch on the TV set for the
first time, a menu is displayed on screen.
This menu prompts you to select the
country and language for the menus.
Plug’n’Play
Country
Language
GB
English
Note
If the above menu is not displayed, proceed to
do the installation of channels by the
Auto Store method (see page 7). If above
menu is displayed, proceed to do the following
steps.
& Use the Î ï keys on the remote control
to select your country. If your country does
not appear in the list, select “. . . “ . Refer to the
“Reference table of Countries available for
selection” on page 19
é Use the Æ key to move to the Language
mode and select your language by the Î ï
keys.
“ Use the Æ key to start search.
The search starts automatically. All the
available TV programmes will be stored. This
operation takes a few minutes. The display
shows the progress of the search and the
number of programmes found.
Important : To exit or interrupt the search
before it is completed, press the
key.
If you interrupt search during auto store, not
all channels will be stored. For all channels to
be stored, you need to do a complete auto
store search again.
Note
ATS (Automatic Tuning System) feature
If the transmitter or cable network sends the
automatic sort signal, the programmes will be
numbered correctly. In this case, the installation
is complete. If this is not the case, you need to
use the Sort menu to number the programmes
correctly.
ACI (Automatic Channel Installation)
feature
If a cable system or a TV channel which
broadcasts ACI is detected, a programme
list appears. Without ACI broadcast, the channels
are numbered according to your language and
country selection. You can
use the Sort menu to renumber them.
Some transmitters or cable networks broadcast their
own sort parameters (region, language, etc.). In this
case, indicate your choice using the Î ï keys and
confirm with Æ key.
Program Sort
key. The TV Menu is
1 Press the
displayed on the screen.
TV Menu
Picture
Sound
Features
Install
Install
Language Æ
Country Æ
Auto Store Æ
Manual Store Æ
Sort Æ
Name Æ
•
0
•
•
•
•
•
1
2
3
4
5
2 Use the ï key, select the Install menu
and the Æ /
key to enter the
Install menu.
3
Use the ï key to select Sort and the
Æ/
key to enter sort mode.
4
Select the programme number you want to
move using the Î ï keys and the Æ /
key to enter sorting mode (The arrow cursor
now points to the left).
5 Use the Î ï keys to select the new
programme number and confirm with the
key. (The arrow points to the
Í/
right and sorting is completed).
6 Repeat steps 4 and 5 for each
programme number you wish to re-number.
7
To return to previous menu, press the
key.
8 To exit the menu, press the
key.
Auto Store
1 Press the
4
key.
2 Using the ï key, select Install and the
Æ/
key to enter the Install menu
(Language is highlighted).
TV Menu
Picture
Sound
Features
Install
Install
Language Æ
Country Æ
Auto Store
Manual Store Æ
Sort Æ
Name Æ
Search
3 Before you proceed to do auto store
of channels, select your desired menu
*Language with the Í Æ keys.
* Selecting the language
If you have selected the wrong language for one
reason or another and do not understand the
language to operate the set, do the following to
bring you back to your preferred language :
– press the
menu.
key to exit the existing
– press the
key to enter the TV menu.
Select Country with the ï key and
use the Í Æ keys to select the country of
your choice.
5 Using the ï key, select Auto Store and
the Æ /
key to start automatic
searching of the channels. All the available TV
programmes will be stored. This operation
takes a few minutes. The display shows the
progress of the search and the number of
programmes found.
6 After the search is completed, press the
key to exit menu.
Important : To exit or interrupt the search
before it is completed, press the
key.
If you interrupt search during auto store, not
all channels will be stored. For all channels to
be stored, you need to do a complete auto
store search again.
– press the ï key repeatedly until the
FOURTH item in the TV menu is
highlighted.
– press the Æ /
key to go into the Install
menu.
– press the Í Æ keys to select your preferred
language (the menu will now appear in the
chosen language). You can proceed to install
the TV channels automatically.
Manual Store
This menu is used to store the programmes
one at a time.
1 Press the
key.
2 With the ï key, select Install and the
Æ/
key to enter the Install menu.
3 Use the ï key to select Manual Store and
key to enter Manual Store
the Æ /
menu.
4 Use the Î ï keys to select the items in the
Manual Store menu to adjust or activate.
6 Search :
Press the Æ /
key. The search starts.
Once a programme is found, the scanning
stops and its name is displayed (if available).
Go to the next step. If you know the
frequency of the required programme, this
can be entered directly using the
to
keys.
If no picture is found, see “Troubleshooting Tips”
on page 17 and 18..
7
Program No. :
Enter the required number with the
or Í Æ keys.
to
8
Fine Tune :
If the reception is not satisfactory, adjust
using the Í Æ keys.
9
Store :
To store the changes, press Æ /
The programme is now stored.
TV Menu
Picture
Sound
Features
Install
5
Manual Store
System
Search Æ
Program No. Æ
Fine Tune Æ
Store Æ
Europe
System : Use the Í Æ keys to select
Europe (automatic detection*),
France (LL’ standard),
UK (I standard),
West Europe (BG standard) or
East Europe (DK standard).
key .
10 Repeat steps 6 to 9 for each programme
to be stored.
11 To return to previous menu, press the
key.
12 To exit the menu, press the
key.
* Except for France (LL’ standard), you must
select France.
Naming of Channel
If required, you can give a name to the TV
channel.
3 Use the ï key to select Name and
the Æ /
key to enter name mode.
1 Press the
4 Use the Î ï keys to select the programme
you want to name and the Æ /
key to
enter naming mode.
key.
2 With the ï key, select Install and the
key to enter the Install menu.
Æ/
TV Menu
Picture
Sound
Features
Install
5 Use the Î ï keys to select the characters
and use the Í Æ keys to move around the
name display area (maximum of 5 characters).
Install
Install
Æ Æ
Language
Language
Æ Æ
Country
Country
Æ Æ
Auto
Store
Auto
Store
Æ Æ
Manual
Store
Manual
Store
Æ Æ
Sort
Sort
Æ Æ
Name
Name
key until the name
6 Press Í Æ /
appears at the top right hand corner of the
TV screen. The name is now stored.
8 8
7 To exit the menu, press the
key.
Picture and Sound Settings
1 Press the
key.
Description of the Picture settings
2 Use the Î ï keys to select Picture or
Sound.
Sharpness : this increases or decreases the
sharpness level to improve details in the picture.
TV Menu
Picture
Brightness
Colour
Contrast
Sharpness
Colour Temp.
Store
39
Colour Temp. : this changes the colour
rendering: Cold (bluer), Normal (balanced) or
Warm (redder).
Store : to store the picture adjustments and
settings.
Description of the Sound settings
Equalizer : to adjust the sound tone (from bass:
120 Hz to treble : 10 KHz).
TV Menu
Picture
Sound
Features
Install
Colour : this changes the intensity of the colour.
Contrast : this changes the difference between
the light and dark tones.
keys to enter
3 Use the Í Æ /
Picture or Sound menu.
Picture
Sound
Features
Install
Brightness : this changes picture brilliance.
Sound
Equalizer Æ
Balance Æ
Delta Voliume Æ
AVL Æ
Dolby Virtual Æ
Store Æ
• 120 Hz
• 500 Hz
• 1500 Hz
• 5 KHz
• 10 KHz
4 Use the Î ï keys to select a Picture or
Sound setting and the Í Æ keys to adjust.
5 To return to previous menu, press the
key.
6 To exit the menu, press the
key.
Balance : this balances the sound on the left and
right speakers.
Delta Volume : this is used to compensate
any volume differences between the different
programmes or EXT sockets. Note : Programmes
0 to 40 have individual volume setting and
programmes 41 and above share common setting.
AVL (Automatic Volume Leveller) : this is used
to limit sudden increases in sound, especially on
programme change or advertising slots.
Dolby Virtual : To activate / deactivate the
surround sound effect.
You can also access these settings with the
key.
Store : this is used to store the sound settings.
Using the Contrast+ and NR (Noise Reduction) features
Definition of the feature settings
1
Press the
key.
2
With the ï key, select Features and the
Æ/
key to enter the Features menu.
3
Use the Î ï keys to select Contrast+ or
NR (Noise Reduction) and the Í Æ keys
to select an On or Off option.
4
To return to previous menu, press the
key.
5
To exit the menu, press the
Contrast+ :
– optimise the total contrast of the picture for
improved picture visibility.
– select On option to activate feature.
NR (Noise Reduction) :
– improves “noisy” picture (little dots on picture)
due to weak signal transmission.
– select On option to activate feature.
key.
Timer function
This menu lets you use the TV set as an alarm.
& Press the
key.
é With the cursor, select the Features menu
then Timer :
programme for the wake-up alarm.
“ Sleep: to select an automatic standby
period.
TV Menu
Picture
Sound
Features
Install
! Activate: the settings include:
• Once for a single alarm,
• Daily for each day,
Timer
Sleep Æ
Time
Start Time Æ
Stop Time Æ
Program No. Æ
Activate Æ
• Off to cancel.
10:56
‘ Time: enter the current time.
Note: the time is updated automatically
each time the TV set is switched on via the
teletext information on programme 1. If
this programme does not have teletext, the
update will not take place.
10
( Start Time: enter the start time.
§ Stop Time: enter the standby time.
è Program No.: enter the number of the
ç Press
to put the TV set in standby.
It will automatically come on at the time
programmed.
If you leave the TV set on, it will just change
programmes at the time entered (and will
go to standby mode at the Stop Time).
Using the PIP (Picture-in-Picture) feature
The PIP (Picture-in-Picture) feature allows you
to call up a PIP screen of the PC (Personal
Computer) or HD (High Defintion) device
while watching a TV programme.
“ Use the Î ï keys to select PIP
‘ Use the Æ /
key to enter PIP menu.
PIP
PIP Size Æ
Horizontal Æ
Vertical Æ
HDMI Æ
IMPORTANT
To call up a PIP screen of the PC equipment,
the following step must be taken :
HDMI 1 or HDMI 2 input MUST be connected
to the DVI output of the PC equipment. Use a
HDMI/DVI cable to do the connection.
To call up a PIP screen of the HD equipment,
the following steps must be taken :
HDMI 1 or HDMI 2 input MUST be connected
to the HDMI output of the HD equipment.
NOTE
• While you are watching TV programmes, you
can only call up a PIP screen from only one
source.
• Go to the PIP menu and select HDMI. See
below on how to access the PIP menu.
• Select HDMI 1 or HDMI 2 depending on
connection.
( Use the Î ï keys to select PIP menu items.
§ Use the Í Æ Î ï keys to access the PIP
menu items, make the following adjustments
or options.
è To exit the PIP screen, select PIP Size.
followed by the Off option.
Definitions of PIP items
PIP Size
: Select your PIP size (Off, Small,
Medium, Large and Side-bySide).
Horizontal : Move the PIP screen horizontally
from left to right and vice-versa.
Vertical
: Move the PIP screen vertically
from top to bottom and vice-versa.
HDMI
PIP
PIP Size Æ
Horizontal Æ
Vertical Æ
HDMI Æ
PIP
HDMI-1
PIP Size Æ
Horizontal Æ
Vertical Æ
HDMI Æ
Off
: If HDMI 1 or HDMI 2 are both
connected, you can only select
one source, HDMI 1 or HDMI 2.
Accessing the PIP screen via the PIP key
HDMI-2
Accessing the PIP screen via the PIP menu
Note : This is only possible when PIP signal is
detected.
& Press the
key on the remote control
to display PIP screen. A small PIP screen
will appear on the TV screen.
Note : This is only possible when PIP signal
is detected.
& Press the
key to display main menu.
“ Press the
é With the Î ï key, select Features and
the Æ /
menu.
TV Menu
Picture
Sound
Features
Install
key to enter the Features
Features
Timer Æ
Contrast+ Æ
NR Æ
PIP Æ
• PIP Size
• Horizontal
• Vertical
• HDMI
é Press the
key a second time to change
the small PIP screen to a medium PIP screen
size.
key a third time to change the
medium PIP screen to large PIP screen size.
‘ Press the
key a fourth time to change
the large PIP screen to a Side-by-Side (a TV
screen on one side and the PIP screen on the
other side).
( Press the
key a fifth time exit PIP screen.
NOTE
For more details on connections
to the PC and HD equipment, see
CONNECTION GUIDE.
11
Screen Formats
The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional
screen). 4:3 pictures sometimes have a black band at the left and right of the screen. This function
allows you to optimise the picture display on screen.
key (or Í Æ) to select the different modes. This TV set is also equipped with
Press the
automatic turning which will select the correct-screen format, provided the specific signals are
transmitted with the programmes.
4:3
The picture is reproduced in 4:3 format and a black band is displayed
on either side of the picture.
Movie expand 14:9
The picture is enlarged to 14:9 format, a thin black band remains on
both sides of the picture.
Movie expand 16:9
The picture is enlarged to 16:9 format. This mode is recommended
when displaying pictures which have black bands at the top and bottom
(letterbox format).
Subtitle Zoom
This mode is used to display 4:3 pictures using the full surface of the
screen leaving the sub-titles visible.
Superzoom
This mode is used to display 4:3 pictures using the full surface of the
screen by enlarging the sides of the picture.
Widescreen
The picture is displayed in the correct proportions of images
transmitted in 16:9.
Note: If you display a 4:3 picture in this mode, it will be enlarged
horizontally.
12
Using the Smart Picture and Sound features
Smart Picture feature offers you a choice of 5
picture settings namely : Rich, Natural, Soft,
Multimedia and Personal.
Definition of Picture Settings
Rich
Press the
button repeatedly to cycle
through the settings to select your desired mode.
Natural
Natural
Rich
or
Soft
Soft
Multimedia
: Brilliant and sharp picture settings
suitable for bright environment and
for use in demonstrations to show
off the quality of the TV on good
sources.
: Reference mode for living room
conditions and average signals.
: Intended for bad-quality signals.
Suitable for living room viewing.
Multimedia : Best for graphical applications.
Personal
Personal
: Pictures settings are set to your
preference.
Smart Sound feature offers you a choice of 4
sound settings namely : Theatre, Music, Voice,
and Personal.
Definition of Sound Settings
Press the
button repeatedly to cycle
through the settings to select your desired mode.
Music
: Emphasize low tone (Bass boosted).
Voice
: Emphasize high tone (Treble boosted).
Music
Theatre
or
Voice
Personal
Theatre : Emphasize sensation to action (Bass
and Treble boosted).
Personal : Sound settings are set to your
preference.
NOTE : The Personal setting is the setting that
you set up using the Picture/Sound menu in the
main menu. This is the only setting in the Smart
Picture/Sound settings that can be changed. All
other settings are pre-set at the factory.
Using the Active Control feature
Active Control feature automatically adjusts
the picture setting for optimal picture quality
continuously under any signal conditions.
& Press the
key repeatedly to toggle
between Active Control Off and Active
Control On options.
é Select the Active Control On option to
activate the Active Control feature.
“ Select the Active Control Off option to
deactivate the Active Control feature.
Active Control Off
Active Control On
13
Teletext
Teletext is an information system broadcast by certain channels which can be consulted like a newspaper.
It also offers access to subtitles for viewers with hearing problems or who are not familiar with the
transmission language (cable networks, satellite channels, etc.).
1 Teletext call
This is used to switch on or off teletext display. The
summary appears with a list of items that can be accessed.
Each item has a corresponding 3 digit page number. If
channel selected does not broadcast teletext, the
indication 100 will be displayed and the screen will remain
blank. Proceed to exit teletext and select another channel.
2 Selecting a page
Enter the number of the page required using the 0 to 9
keys or P –/+ keys. Example: page 120, enter 120. The
number is displayed at the top left corner of the screen.
When the page is located, the counter stops searching.
Repeat this operation to view another page. If the counter
continues to search, this means that the page is not
transmitted. Select another number.
3 Direct access to
Coloured areas are displayed at the bottom of the
screen. The 4 colour keys are used to access the items or
corresponding pages. The coloured areas flash when the
item or the page is not yet available.
4 Contents
This returns you to the contents page (usually page 100).
5 Sub-page display
Certain pages contain sub-pages which are automatically
displayed successively. This key is used to stop or resume
appears top left.
sub-page display. The indication
6 Double page
To activate or deactivate the double page teletext display
mode. The active page is displayed on the left and the
if you
following page is displayed on the right. Press
want to hold a page (i.e. the contents page). The active
page is then displayed on the right. To return to normal
key.
mode, press the
7
9
7 Hidden
To display or hide the concealed information (games
solutions).
8
8
AUX
3
6
5
1
2
2
4
the items
teletext
AUX
9
information
Enlarge a page
This allows you to display the top or bottom part of the
page. Pressing it again will return the page to normal size.
9 Favourite pages
Instead of the standard coloured areas displayed at the
bottom of the screen, you can store 4 favourite pages on
the first 40 channels which can then be accessed using the
coloured keys (red, green, yellow, blue). Once set, these
favourite pages will become the default every time teletext
is selected.
2
9
9
1 Press the
key to change to favourite
pages mode.
keys to enter the teletext
/
2 Use the
page that you want to store as a favourite page.
3 Press and hold the colour key of your choice for
about 5 seconds. The page is now stored.
4 Repeat steps 2 to 3 with the other coloured keys.
key.
5 To exit favourite page mode, press the
To
exit
teletext
mode,
press
the
key.
6
NOTE : To clear favourite pages, press and hold
key for about 5 seconds.
14
Using the TV as a PC Monitor
Your TV can be used as a computer monitor.
Description of Features
IMPORTANT
Format :
– Chooses between full screen or native format of
the PC screen.
For the TV to function as PC monitor, the
following steps must be taken :
& HDMI 1 or HDMI 2 input MUST be
connected to the DVI output of the PC.
Use a DVI to HDMI adaptor to do the
connection.
é Press the
key to display Source List and
use the Î ï key to select HDMI 1 or HDMI 2.
Use the Æ /
source.
key to switch to the selected
Æ
The PIP (Picture-in-Picture) feature allows you to
call up a PIP screen of a TV programme while you
are in PC mode.
To call up a PIP screen of the TV programme, the
following step must be taken :
Source
TV
EXT 1
EXT 2 / SVHS2
EXT 3 / SVHS3
EXT 4
HDMI 1
HDMI 2
Æ
Using the PC menus
Press the
Using the PIP feature
IMPORTANT
Source
TV
EXT 1
EXT 2 / SVHS2
EXT 3 / SVHS3
EXT 4
HDMI 1
HDMI 2
PIP (Picture-in Picture) :
– Displays a PIP screen to watch TV programmes
at the same time.
key to display the PC menu.
Use the Î ï key to access the settings
and the Í Æ /
key to select or adjust
setting (the settings are automatically saved).
Description Picture settings
Brightness / Contrast :
– Adjusts the brightness and contrast.
Colour Temp :
– Changes the colour rendering : Cool (bluer),
Normal (balance) or Warm (redder).
Audio Selection :
– Chooses the audio from the TV or PC/HD.
NOTE
NOTE
For
more details on connection
For
more
details on connection
to the
PC equipment,
see
to
the
PC
equipment,
see
CONNECTION
GUIDE.
CONNECTION GUIDE.
HDMI 1 or HDMI 2 input MUST be connected
to the DVI output of the PC equipment. Use a HDMI
to DVI adaptor cable to do the connection.
The PIP menu items : PIP Size, Horizontal
and Vertical works in exactly the same way as
when calling a PIP screen in TV mode. Except for
HDMI, there is no selection for other source.
PIP
PIP Size Æ
Horizontal Æ
Vertical Æ
HDMI Æ
HDMI
Í
No Selection
For description of PIP menu items and how it
works, refer to the section on “Using the PIP
(Picture-in Picture) Feature” page 11.
Supported PC Resolutions
640 x 480, 60 Hz
640 x 480, 67 Hz
640 x 480, 72 Hz
640 x 480, 75 Hz
800 x 600, 56 Hz
800 x 600, 60 Hz
800 x 600, 72 Hz
800 x 600, 75 Hz
1024 x 768, 60 Hz
1024 x 768, 70 Hz
1024 x 768, 75 Hz
15
Using the TV in HD (High Definition) Mode
HD Mode
HD Features
The HD (High Definition) mode allows you to
enjoy clearer and sharper pictures if you are
using a HD equipment that can transmit high
definition programming.
Timer : Functions of the Sleeptimer and Timer
are the same as the TV Sleeptimer and Timer
functions and work in exactly the same way as the
TV Sleeptimer and Timer functions (see page 10).
IMPORTANT
PIP : Display a PIP screen to watch TV
programmes at the same time. The PIP menu
items : PIP Size, Horizontal and Vertical work
in exactly the same way as when calling a PIP
screen in TV mode.
For description of PIP menu items and how it
works, refer to the section on “Using the PIP
(Picture-in Picture) Feature” page 11.
For the TV to function in HD mode, the
following steps must be taken :
& HDMI 1 or HDMI 2 input MUST be
connected to the HDMI/DVI output of the HD
equipment . Use a HDMI to DVI adaptor if DVI
is connected. For more information, refer
to Connection Guide.
é Press the
key to display Source List
and use the Î ï key to select HDMI 1 or
HDMI 2.
“ Use the Æ /
key to switch to the selected
source.
Source
TV
EXT 1
EXT 2 / SVHS2
EXT 3 / SVHS3
EXT 4
HDMI 1
HDMI 2
* Horizontal Shift : Adjust the horizontal
position of the image.
* Mode Selection : When you connect PC or
HD equipment supporting resolutions of 480p,
576p or 720p, the Mode Selection in the
Features menu will be highlighted. This will allow
you to select between the PC and HD mode.
If it does not support the 480p, 576p or 720p
resolutions, you cannot access this function.
Æ
Source
TV
EXT 1
EXT 2 / SVHS2
EXT 3 / SVHS3
EXT 4
HDMI 1
HDMI 2
Features
Æ
Timer Æ
Contrast+
NR
PIP Æ
Horizontal Shift Æ
Mode Selection Æ
HD
Using the HD menus
key to display the HD menu.
& Press the
é Use the Î ï key to access the settings
and the Í Æ key to select or adjust setting.
HD Install menu
Supported HD format
480p
576p
720p
1080i
Note : You cannot access Install in the HD
menu There is NO Install function in HD mode.
HD Picture and Sound settings
Functions of HD Picture and Sound settings are
the same as the TV Picture and Sound settings
and work in exactly the same way as the TV
Picture and Sound settings (see page 9).
NOTE : For more details on connection to the
HD equipment, see CONNECTION GUIDE.
Your Philips TV is HDMI compliant. If you do not get a good picture, please change the video
format on your device (DVD player, cable set-top box, etc.) to a standard format. For example,
for DVD player, select 480p, 576p, 720p or 1080i. For PC, select 640 x 480, 800 x 600 or
1024 x 768. If the problem persists, please refer to your PC user manual on possible software
upgrades to your graphics card.
Please note that this is not a defect of the TV set.
16
Troubleshooting Tips
Below is a list of symptoms you may encounter with your TV. Before you call for service, make these
simple checks.
Symptom
Possible Causes
What you should do
No display on screen
• Faulty power supply
• TV’s Power not turned
• Check whether power cord is properly connected
into the mains socket and to your TV. If there is still
no power, on disconnect plug. Wait for 60 seconds
and re-insert plug. Switch on TV again.
key on the remote control.
• Press the
Poor reception
(snowish picture and
noise
• Faulty antenna connection • Check antenna connection at rear of TV.
• Weak transmission
• Try manually adjusting your picture (refer to page 8).
• Wrong TV system
• Have you chosen the right TV system? (refer to page 8).
No picture
• Faulty aerial and cable
• Wrong source selected
• Check whether euroconnector cables or aerial
sockets are properly connected.
• Check whether the source is correctly selected.
Press
button to enter Source list and select
the correct source.
No sound on
certain channels
• Wrong TV system
• Check whether the correct TV system is selected
(refer to page 8).
No sound
• Zero volume level
• Sound muted
• Headphone is connected
• Try increasing volume.
• Check that the mute (
) mode is not on. If mute
mode is on, press the
key to deactivate mute
mode.
• Aim remote control directly at sensor on front of TV.
• Disconnect headphone connection.
Sound interference
• Electrical appliances
interference
• Try switching off any electrical appliances, for
example, hairdryer, vacuum cleaner that are in use.
Unable to understand
the language on
screen to operate set
• Wrong language selected
accidently
• Press the
key to exit menu from screen. Press
the
key to enter main menu. Use the ï key
to select the fourth item on the main menu. Use
Æ/
key to enter into the next menu level and
the Í Æ key to select correct language.
TV not responding
to remote control
• Wrong placement of
batteries
• Flat batteries
• Check the placement of the batteries.
• Try changing the batteries.
Occasional appearance
of red, blue, green
and black spots on
screen
• Characteristic of liquid
crystal panel
• This symptom is not a problem. The liquid crystal
panel is built with very high precision technology
giving you the fine picture details. Occasionally, a few
non-active pixels may appear on the screen as a fixed
point of red, blue, green or black. Note that this
does not affect the performance of the set.
Intermittent or
flickering picture on
in HD mode
• * HDCP (see glossary)
authentication failed
• Noise is displayed if the connected digital equipment’s
(DVD player or Set-Top box) *HDCP authentication
failed. Check user manual for the digital equipment
you are connecting.
• Use a standard HDMI to DVI cable.
No sound or picture but
front panel red light is
on
• Set on standby mode
• Press the
key on the remote control.
17
Troubleshooting Tips
Symptom
Possible Causes
What you should do
Cannot access Install
menu
• In AV, EXTERNAL or
HD mode
• Press AV key and select TV mode. You can now
access the Install menu by using the Menu key.
PC modes do not
work
• Wrong connections
• Check whether connections are correct. (see
• Wrong source selected.
• Check whether the source is correctly selected.
Press
button to enter Source list and select
the correct source.
• Check whether you have configured the computer on
a compatible display resolution (see “Using your TV
as PC Monitor” on page 15)).
• Check graphic card setting of PC.
• Wrong display resolution
• Wrong setting of PC
graphic card
“Using your TV as PC Monitor” on page 15).
(For more details on connection to the PC
equipment, see “Connection Guide”.
S-Video colour
becomes faint
• Wrong detection of
signal
• Check whether power cord is properly connected
• Press the P + key on the remote control to do a
channel up and then press the P – key to do a
channel down.
Black bar on top
and bottom of
screen in PC mode
• PC refresh rate too high
• Change PC refresh rate to 60 Hz.
Glossary
DVI (Digital Visual Interface) : A digital interface
standard created by the Digital Display Working Group
(DDWG) to convert analog signals into digital signals to
accommodate both analog and digital monitors.
VGA (Video Graphics Array) : a common standard
graphics display system for PCs.
RGB signals : These are the three video signals, Red
Green Blue, which make up the picture. Using these
signals improves picture quality.
S-VHS signals : These are 2 separate Y/C video
signals from the S-VHS and Hi-8 recording standards.
The luminance signals Y (black and white) and
chrominance signals C (colour) are recorded
separately on the tape. This provides better picture
quality than with standard video (VHS and 8 mm)
where the Y/C signals are combined to provide only
one video signal.
NICAM sound : Process by which digital sound can
be transmitted.
16:9 : Refers to the ratio between the length and
height of the screen. Wide screen televisions have
a ratio of 16/9, conventional screen TV sets have a
ratio of 4/3.
18
HDMI (High-Definition Multimedia Interface) :
Provides an uncompressed, all digital audio/video
interface between the TV and any HDMI-equipped
audio/video component, such as set-top box, DVD
player and A/V receiver. HDMI supports enhanced or
high-definition video plus two-channel digital audio.
System : Television pictures are not broadcast in
the same way in all countries. There are different
standards: BG, DK, I, and LL’. The System setting (p. 8)
is used to select these different standards. This is not
to be confused with PAL or SECAM colour coding.
PAL is used in most countries in Europe, SECAM in
France, Russia and most African countries. The United
States and Japan use a different system called NTSC.
HDCP (High-bandwidth Digital-Content Protection):
HDCP encrypts the transmission of digital content
between the video source or transmitter such as a
computer, DVD player or set-top box and the digital
display or receiver such as a monitor, television or
projector.
Specifications
26PF5xxx
32PF5xxx
Panel screen size
660 mm (26”)
800 mm (32”)
Audio output
2 x 5 W RMS
2 x 15 W RMS
TV System
PAL,
Video playback
NTSC, PAL, SECAM
Sound System
SECAM
Mono, Nicam Stereo, Virtual Dolby Surround
Connectivity
Rear
Antenna In 75 Ω, Scart 1, Scart 2, HDMI 1, HDMI 2,
Component Video Input, DVI Audio In
Audio In, Video In, S-Video In, Headphone
Side
Power consumption
110 W
120 W
Standby power consumption
<1W
<1W
Set dimensions (with stand)
Width
Depth
Height
Nett Weight (with stand)
805 mm
222 mm
477 mm
924 mm
222 mm
550 mm
13.3 kg
19 kg
Reference table of Countries available for selection
Abbreviation
Country
Abbreviation
Country
Abbreviation
Country
A
Austria
GR
Greece
H
Hungary
B
Belgium
I
Italy
HR
Croatia
CH
Switzerland
IRL
Ireland
PL
Poland
D
Germany
L
Luxembourg
RO
Romania
DK
Denmark
N
Norway
RUS
Russia
E
Spain
NL
Netherlands
SK
Slovakia
F
France
P
Portugal
SLO
Slovenia
FI
Finland
S
Sweden
TR
Turkey
GB
England
CZ
Czech Republic
---
Others
19
Table of TV frequencies.
Frequenztabelle der Fernsehsender.
Liste des fréquences TV.
Frequentietabel TV-Zenders.
Tabella delle frequenze TV.
Lista de frecuencias TV.
Lista das frequências TV
Liste over TV senderne.
Tabell over TV-frekvenser.
Tabell över TV-frekvenser.
TV-taajuustaulukko.
K·Ù¿ÏÔÁÔ˜ Û˘¯ÓÔÙ‹ÙˆÓ ÔÌÒÓ.
CÔËÒÓÍ ˜‡ÒÚÓÚ ÔÂ‰‡Ú˜ËÍÓ‚.
A televizió-adóállomások
frekvenciáinak a listája.
Lista częstotliwości stacji nadawczych.
Seznam frekvenčních pásem vysílačů.
Zoznam frekvenčných pásiem vysielačov.
FRANCE
EUROPE
CANAL ................FREQ (MHz)
E2 ........................48.25
E3 ........................55.25
E4 ........................62.25
E5 ......................175.25
E6 ......................182.25
E7 ......................189.25
E8 ......................196.25
E9 ......................203.25
E10 ....................210.25
E11 ....................217.25
E12 ....................224.25
R1 ........................49.75
R2 ........................59.25
R3 ........................77.25
R4 ........................85.25
R5 ........................93.25
R6 ......................175.25
R7 ......................183.25
R8 ......................191.25
R9 ......................199.25
R10 ....................207.25
R11 ....................215.25
R12 ....................223.25
S1 ......................105.25
S2 ......................112.25
S3 ......................119.25
S4 ......................126.25
S5 ......................133.25
S6 ......................140.25
S7 ......................147.25
S8 ......................154.25
S9 ......................161.25
S10 ....................168.25
S11 ....................231.25
S12 ....................238.25
S13 ....................245.25
S14 ....................252.25
CANAL ................FREQ (MHz)
S15 ....................259.25
S16 ....................266.25
S17 ....................273.25
S18 ....................280.25
S19 ....................287.25
S20 ....................294.25
H1 ......................303.25
H2 ......................311.25
H3 ......................319.25
H4 ......................327.25
H5 ......................335.25
H6 ......................343.25
H7 ......................351.25
H8 ......................359.25
H9 ......................367.25
H10 ....................375.25
H11 ....................383.25
H12 ....................391.25
H13 ....................399.25
H14 ....................407.25
H15 ....................415.25
H16 ....................423.25
H17 ....................431.25
H18 ....................439.25
H19 ....................447.25
21.......................471.25
22.......................479.25
23.......................487.25
24.......................495.25
25.......................503.25
26.......................511.25
27.......................519.25
28.......................527.25
29.......................535.25
30.......................543.25
31.......................551.25
32.......................559.25
CANAL ................FREQ (MHz)
33.......................567.25
34.......................575.25
35.......................583.25
36.......................591.25
37.......................599.25
38.......................607.25
39.......................615.25
40.......................623.25
41.......................631.25
42.......................639.25
43.......................647.25
44.......................655.25
45.......................663.25
46.......................671.25
47.......................679.25
48.......................687.25
49.......................695.25
50.......................703.25
51.......................711.25
52.......................719.25
53.......................727.25
54.......................735.25
55.......................743.25
56.......................751.25
57.......................759.25
58.......................767.25
59.......................775.25
60.......................783.25
61.......................791.25
62.......................799.25
63.......................807.25
64.......................815.25
65.......................823.25
66.......................831.25
67.......................839.25
68.......................839.25
69 .......................855.25
CANAL ................FREQ (MHz)
2...........................55.75
3...........................60.50
4...........................63.75
5...........................176.0
6...........................184.0
7...........................192.0
8...........................200.0
9...........................208.0
10.........................216.0
B ........................116.75
C ........................128.75
D ........................140.75
E ........................159.75
F.........................164.75
G ........................176.75
H ........................188.75
I..........................200.75
J .........................212.75
K ........................224.75
L.........................236.75
M........................248.75
N ........................260.75
O ........................272.75
P ........................284.75
Q ........................296.75
ITALY
CANALE ..............FREQ (MHz)
A ..........................53.75
B ..........................62.25
C ..........................82.25
D ........................175.25
E ........................183.75
F.........................192.25
G ........................201.25
H ........................210.25
H1 ......................217.25
Information for users in the UK (not applicable outside the UK)
Positioning the TV
For the best results, choose a position where light
does not fall directly on the screen, and at some
distance away from radiators or other sources of
heat. Leave a space of at least 5 cm all around the
TV for ventilation, making sure that curtains,
cupboards etc. cannot obstruct the air flow through
the ventilation apertures.The TV is intended for use
in a domestic environment only and should never be
operated or stored in excessively hot or humid
atmospheres.
General Points
Please take note of the section entitled 'Tips' at the
end of this booklet.
Interference
The Department of Trade and Industry operates a
Radio Interference Investigation Service to help TV
licence holders improve reception of BBC and IBA
programmes where they are being spoilt by
interference.
If your dealer cannot help, ask at a main Post Office
for the booklet "How to Improve Television and
Radio Reception".
Mains connection
Before connecting the TV to the mains, check that the
mains supply voltage corresponds to the voltage
printed on the type plate on the rear panel of the TV. If
the mains voltage is different, consult your dealer.
Important
This apparatus is fitted with an approved moulded
13AMP plug. Should it become necessary to replace
the mains fuse, this must be replaced with a fuse of
the same value as indicated on the plug.
1. Remove fuse cover and fuse.
2.The replacement fuse must comply with BS 1362
and have the ASTA approval mark. If the fuse is
lost, make contact with your retailer in order to
verify the correct type.
3. Refit the fuse cover.
In order to maintain conformity to the EMC directive,
the mains plug on this product must not be removed.
Connecting the aerial
The aerial should be connected to the socket marked
: at the back of the set.An inferior aerial is likely to
result in a poor, perhaps unstable picture with ghost
images and lack of contrast. Make-shift loft or set-top
aerials are often inadequate.Your dealer will know from
experience the most suitable type for your locality.
Should you wish to use the set in conjunction with
other equipment, which connects to the aerial socket
such as TV games, or a video camera it is recommended
that these be connected via a combiner unit to avoid
repeated connection and disconnection of the aerial plug.
Fitting the stand (if provided)
Use only the stand provided with the set, making
sure that the fixings are properly tightened.A
diagram showing how to assemble the stand is
packed with the stand. Never use a make-shift stand,
or legs fixed with woodscrews.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
2005 © Koninklijke Philips Electronics N.V. All rights reserved.
www.philips.com
3139 125 36602
">