Philips | 24PFT5231/05 | Owner's Manual | Philips 5200 series Full HD Ultra-Slim LED TV 24PFT5231/05 User manual

Philips 5200 series Full HD Ultra-Slim LED TV 24PFT5231/05 User manual
Register your product and get support at
5231 series
www.philips.com/welcome
User Manual
24PFT5231
Contents
1 TV tour
3
12 Videos, photos and music
1.1 Pause TV and recordings
3
1.2 EasyLink
3
1.3 Bluetooth connection (for 5231 series TV)
2 Setting up
3
4
13 Settings
2.1 Read safety
4
2.2 TV stand and wall mounting
2.3 Tips on placement
4
2.4 Power cable
4
2.5 Antenna cable
4
4
6
4 Connect devices
14 Channel installation
7
15 Software
16 Specifications
5.1 On or standby
16
5.2 Sleep timer
16
5.3 Switch off timer
16
7 Channels
18
18 Safety and care
18.1 Safety
55
18.2 Screen care
Index
9 Recording and pause TV
11 Sources
53
55
56
19.1 Terms of use
57
19.2 Copyrights and licenses
8.1 What you need
23
8.2 Using the TV guide
23
25
25
26
27
10.1 About the Home menu
10.2 Open the Home menu
52
19 Terms of use, copyrights and licenses
57
23
10 Home menu
50
50
17.1 Register your TV
52
17.2 Using help
52
17.3 Troubleshooting
52
17.4 Online help
53
17.5 Consumer care / Repair
17
7.1 Switch channels
19
7.2 Channel lists
19
7.3 Channel options
20
7.4 Text / Teletext
22
9.1 Recording
9.2 Pause TV
49
17 Help and support
19
8 TV Guide
47
47
16.1 Environmental
49
16.2 Power
49
16.3 Reception
49
16.4 Display type
50
16.5 Display input resolution
16.6 Dimensions and Weights
16.7 Connectivity
50
16.8 Sound
50
16.9 Multimedia
51
16
6.1 Key overview
17
6.2 IR sensor (for 4031/5231/5242 series TV)
6.3 IR sensor (for 4131 series TV)
18
6.4 Batteries
18
6.5 Cleaning
18
43
47
15.1 Software version
47
15.2 Local updates
47
15.3 Open source software
15.4 Open source license
14
5 Switching On and Off
43
14.1 Antenna/cable installation
14.2 Channel list copy
45
4.1 About connections
7
4.2 CAM with smart card - CI+
8
4.3 Receiver - Set-Top Box
9
4.4 Home Theatre System - HTS
10
4.5 Blu-ray disc player
11
4.6 DVD player
12
4.7 Headphones
12
4.8 Game console
12
4.9 USB hard drive
13
4.10 USB flash drive
13
4.11 Photo camera
14
4.12 Camcorder -HDMI
14
4.13 Computer
14
4.14 Bluetooth sound station (for 5231/5242 series TV)
6 Remote control
31
13.1 Quick settings
31
13.2 Picture
31
13.3 Sound
34
13.4 Eco settings
37
13.5 General settings
37
13.6 Child lock
41
13.7 Universal access
41
3 Network for Freeview (for 4031/05, 4131/05,
5231/05 series TV) 6
3.1 Network
29
29
12.1 From a USB connection
12.2 Play your videos
29
12.3 View your photos
29
12.4 Play your music
30
27
27
28
11.1 Switch to a device
28
11.2 Options for a TV Input
28
11.3 Game or computer
28
2
59
57
1
TV tour
1.1
Pause TV and recordings
If you connect a USB Hard Drive, you can pause and
record a broadcast from a digital TV channel.
Pause your TV and answer that urgent phone call or
simply take a break during a sports match, while the
TV stores the broadcast on the USB Hard Drive. You
can watch it again later.
With a USB Hard Drive connected, you can also
record digital broadcasts. You can record while you
are watching a programme or schedule a recording of
an upcoming programme.
For more information, in Help, see
chapter Recording and pause TV.
1.2
EasyLink
With EasyLink you can operate a connected device,
like a Bluray Disc player, with the remote control of
the TV.
EasyLink uses HDMI CEC to communicate with the
connected devices.
1.3
Bluetooth connection (for
5231 series TV)
Your TV has Bluetooth technology inside.
The technology allows easy wireless connection to
Bluetooth devices, such as smartphones, tablets or
even laptops. So you can enjoy your favourite music
and sound from videos or games wirelessly.
3
2
2.4
Setting up
Power cable
2.1
5231 series TV
Read safety
- Insert the power cable into the POWER connector
on the back of the TV.
- Make sure the power cable is securely inserted in
the connector.
- Make sure that the power plug, in the wall socket, is
accessible at all times.
- When you unplug the power cable, always pull the
plug, never pull the cable.
Read the safety instructions first before you use the
TV.
To read the instructions, in
and care.
Help, see chapter Safety
2.2
TV stand and wall mounting
TV stand
You can find the instructions for mounting the TV
stand in the Quick Start Guide that came with the TV.
In case you lost this guide, you can download it
from www.philips.com.
Use the model number of the TV to look for
the Quick Start Guide to download.
Wall mounting
2.3
Tips on placement
5231 series TV
- Position the TV where light does not shine directly
on the screen.
- Position the TV up to 15 cm away from the wall.
- The ideal distance to watch TV is 3 times its
diagonal screen size. When seated, your eyes should
be level with the centre of the screen.
Although this TV has a very low standby power
consumption, unplug the power cable to save energy
if you do not use the TV for a long period of time.
For more information, in Help, see
chapter Switching On and Off .
2.5
Antenna cable
Insert the antenna plug firmly into
the Antenna socket at the back of the TV.
You can connect your own antenna or an antenna
signal from an antenna distribution system. Use an
IEC Coax 75 Ohm RF antenna connector.
Use this antenna connection for DVB-T and DVB-C
input signals.
4
5
3
setting of the router. DHCP should be switched on.
Network for
Freeview (for
4031/05, 4131/05,
5231/05 series TV)
**To fulfill EMC regulations, use a shielded FTP Cat.
5E Ethernet cable.
Network settings
View network settings
You can view all current network settings here. The IP
and MAC address, signal strength, speed, encryption
method, etc.
3.1
To view the current network settings…
Network
1. Press , select Network and press  (right) to
enter the menu.
2. Select View network settings and press OK.
3. Press  (left) repeatedly if necessary, to close the
menu.
About network
Network port and function is for Freeview HD
streaming features only.
Network configuration
Connect to network
If you are an advanced user and want to install your
network with Static IP addressing, set the TV to Static
IP.
Wired connection
What you need
To set the TV to Static IP…
To connect the TV to the Internet, you need a
network router with a connection to the Internet.
1. Press , select Network and press  (right) to
enter the menu.
2. Select Network configuration and press OK.
3. Select Static IP and press OK to enable Static
IP configuration.
4. Select Static IP configuration and configure the
connection.
5. You can set the number for IP
address, Netmask, Gateway, DNS 1, or DNS 2.
6. Press  (left) repeatedly if necessary, to close the
menu.
Use a high-speed (broadband) connection to the
Internet.
Make the connection
To make a wired connection…
1. Connect the router to the TV with a network cable
(Ethernet cable**).
2. Make sure that the router is switched on.
3. Press , select Network and press  (right) to
enter the menu.
4. Select Connect to network and press OK.
5. Select Wired and press OK. The TV constantly
searches for the network connection.
6. A message will be shown when the connection is
successful.
If the connection fails, you can check the DHCP
6
HDMI cable and do not use an HDMI cable longer
than 5 m.
4
Connect devices
4.1
About connections
Connectivity guide
Copy protection
Always connect a device to the TV with the highest
quality connection available. Also, use good quality
cables to ensure a good transfer of picture and
sound.
HDMI cables support HDCP (High-bandwidth Digital
Content Protection). HDCP is a copy protection signal
that prevents copying content from a DVD disc or Bluray Disc. Also referred to as DRM (Digital Rights
Management).
When you connect a device, the TV recognizes its
type and gives each device a correct type name. You
can change the type name if you wish. If a correct
type name for a device is set, the TV automatically
switches to the ideal TV settings when you switch to
this device in the Sources menu.
HDMI ARC
Only HDMI 1 on the TV have HDMI ARC (Audio
Return Channel).
If you need help to connect several devices to the TV,
you can visit the Philips TV connectivity guide. The
guide offers information on how to connect and
which cables to use.
If the device, typically a Home Theatre System (HTS),
also has the HDMI ARC connection, connect it
to HDMI 1 connection on this TV. With the HDMI
ARC connection, you do not need to connect the
extra audio cable that sends the sound of the TV
picture to the HTS. The HDMI ARC connection
combines both signals.
Go to www.connectivityguide.philips.com
Antenna port
In case you prefer to switch off ARC on HDMI 1 ARC,
press , select Sound and press OK.
Select Advanced > HDMI 1 - ARC.
If you have a Set-top box (a digital receiver) or
Recorder, connect the antenna cables to run the
antenna signal through the Set-top box and/or
Recorder first before it enters the TV. In this way, the
antenna and the Set-top box can send possible
additional channels to the Recorder to record.
HDMI CEC - EasyLink
EasyLink
An HDMI connection has the best picture and sound
quality. One HDMI cable combines video and audio
signals. Use an HDMI cable for High Definition (HD)
TV signals. For best signal quality transfer, use a High
speed HDMI cable and do not use an HDMI cable
longer than 5 m.
HDMI ports
EasyLink HDMI CEC
HDMI quality
If your devices are connected with HDMI and have
EasyLink, you can operate them with the TV remote
control. EasyLink HDMI CEC must be switched On on
the TV and the connected device.
An HDMI connection has the best picture and sound
quality. One HDMI cable combines video and audio
signals. Use an HDMI cable for TV signal.
With EasyLink you can operate a connected device
with the TV remote control. EasyLink uses HDMI CEC
For best signal quality transfer, use a High speed
7
(Consumer Electronics Control) to communicate with
the connected devices. Devices must support HDMI
CEC and must be connected with an HDMI
connection.
and add an Audio L/R cable (mini-jack 3.5mm) to
Audio In for sound, on the back of the TV.
EasyLink setup
The TV comes with EasyLink switched on. Make sure
that all HDMI CEC settings are properly set up on the
connected EasyLink devices. EasyLink might not work
with devices from other brands.
Copy protection
DVI and HDMI cables support HDCP (High-bandwidth
Digital Content Protection). HDCP is a copy protection
signal that prevents copying content from a DVD disc
or Blu-ray Disc. Also referred to as DRM (Digital
Rights Management).
HDMI CEC on other brands
The HDMI CEC functionality has different names on
different brands. Some examples are: Anynet, Aquos
Link, Bravia Theatre Sync, Kuro Link, Simplink and
Viera Link. Not all brands are fully compatible with
EasyLink.
Scart
Example HDMI CEC branding names are property of
their respective owners.
SCART is a good quality connection.
EasyLink On or Off
The SCART connection can be used for CVBS and
RGB video signals but cannot be used for High
Definition (HD) TV signals. The SCART connection
combines video and audio signals. The SCART
connection also supports NTSC playback.
You can switch EasyLink on or off. The TV comes with
the EasyLink settings switched on.
To switch off EasyLink completely…
1. Press , select General settings and
press  (right) to enter the menu.
2. Select EasyLink, press  (right) and
select EasyLink one step further.
3. Select Off.
4. Press  (left) repeatedly if necessary, to close the
menu.
Audio Out - Optical
Audio Out - Optical is a high quality sound
connection.
This optical connection can carry 5.1 audio channels.
If your device, typically a Home Theatre System
(HTS), has no HDMI ARC connection, you can use this
connection with the Audio In - Optical connection on
the HTS. The Audio Out - Optical connection sends
the sound from the TV to the HTS.
EasyLink remote control
If you want devices to communicate but you don't
want to operate them with the TV remote control, you
can switch off EasyLink Remote Control separately.
To switch EasyLink Remote Control on or off…
1. Press , select General settings and
press  (right) to enter the menu.
2. Select EasyLink > EasyLink remote control and
press OK.
3. Select On or Off and press OK.
4. Press  (left) repeatedly if necessary, to close the
menu.
DVI to HDMI
If you still own a device that only has a DVI
connection, you can connect the device to any of
the HDMI connection with a DVI to HDMI adapter.
Use a DVI to HDMI adapter if your device only has a
DVI connection. Use one of the HDMI connections
8
4.2
CAM with smart card - CI+
CI+
This TV is ready for the CI+ Conditional Access.
With CI+ you can watch premium HD programmes,
like movies and sports, offered by digital TV operators
in your region. These programmes are scrambled by
the TV operator and descrambled with a prepaid CI+
module.
Digital TV operators provide a CI+ module
(Conditional Access Module - CAM) and an
accompanying smart card, when you subscribe to
their premium programmes. These programmes have
a high level of copy protection.
Passwords and PIN codes
For some CAMs, you must enter a PIN code to watch
its channels. When you set the PIN code for the CAM,
we recommend you to use the same code you are
using to unlock the TV.
To set the PIN code for the CAM…
1. Press  SOURCES .
2. Select the channel type you are using the CAM for.
3. Press  OPTIONS and select Common
Interface.
4. Select the TV operator of the CAM. The following
screens come from the TV operator. Follow the onscreen instruction to look up the PIN code setting.
Contact a digital TV operator for more information on
terms & conditions.
4.3
Receiver - Set-Top Box
Smart card
Cable box
Digital TV operators provide a CI+ module
(Conditional Access Module - CAM) and an
accompanying smart card, when you subscribe to
their premium programmes.
Use 2 antenna cables to connect the antenna to the
Set-top box (a digital receiver) and the TV.
Insert the smart card into the CAM module. See the
instruction you received from the operator.
To insert the CAM in the TV…
1. Look on the CAM for the correct method of
insertion. Incorrect insertion can damage the CAM
and TV.
2. While looking at the back of the TV, with the front
of the CAM facing towards you, gently insert the CAM
into the slot COMMON INTERFACE.
3. Push the CAM in as far as it will go. Leave it in the
slot permanently.
Next to the antenna connections, add an HDMI cable
to connect the Set-top box to the TV.
Alternatively, you can use a SCART cable if the Settop box has no HDMI connection.
When you switch on the TV, it may take a few minutes
before the CAM is activated. If a CAM is inserted and
subscription fees are paid (subscription methods can
differ), you can watch the scrambled channels
supported by the CAM smart card.
Switch Off Timer
Switch off this automatic timer, if you only use the
remote control of the Set-top box. Switch this timer
off to prevent the TV from switching off automatically
after a 4 hour period without a key press on the
remote control of the TV.
The CAM and smart card are exclusively for your TV. If
you remove the CAM, you will no longer be able to
watch the scrambled channels supported by the
CAM.
For more information, in Help, see
chapter Switching On and Off > Switch off timer.
9
Satellite tuner
Connect the dish antenna cable to the Satellite
receiver.
Next to the antenna connection, add an HDMI cable
to connect the device to the TV.
Alternatively, you can use a SCART cable if the device
has no HDMI connection.
Audio to video synchronisation (sync)
If the sound does not match the video on screen, you
can set a delay on most Home Theatre Systems with
a disc player to match the sound with the video.
Connect with HDMI
Use an HDMI cable to connect a Home Theatre
System (HTS) to the TV. You can connect a Philips
Soundbar or an HTS with a built-in disc player.
Switch Off Timer
Switch off this automatic timer, if you only use the
remote control of the Set-top box. Switch this timer
off to prevent the TV from switching off automatically
after a 4 hour period without a key press on the
remote control of the TV.
For more information, in Help, see
chapter Switching On and Off > Switch off timer.
4.4
Home Theatre System - HTS
If the Home Theatre System has no HDMI ARC
connection, add an optical audio cable (Toslink) to
send the sound of the TV picture to the Home Theatre
System.
Connect with HDMI ARC
Use an HDMI cable to connect a Home Theatre
System (HTS) to the TV. You can connect a Philips
Soundbar or an HTS with a built-in disc player.
Audio to video synchronisation (sync)
If the sound does not match the video on screen, you
can set a delay on most Home Theatre Systems with
a disc player to match the sound with the video.
HDMI ARC
If your Home Theatre System has an HDMI ARC
connection, you can use HDMI 1 on the TV to
connect. With HDMI ARC, you do not need to
connect the extra audio cable. The HDMI ARC
connection combines both signals.
HDMI 1 on the TV can offer the Audio Return
Channel (ARC) signal. But once you have connected
the Home Theatre System, the TV can only send the
ARC signal to this HDMI connection.
Audio out settings
Audio out delay
With a Home Theatre System (HTS) connected to the
TV, the picture on TV and the sound from the HTS
should be synchronised.
Automatic audio to video sync
With recent Philips Home Theatre Systems, the audio
to video sync is done automatically and always
correct.
Audio sync delay
10
For some Home Theatre Systems you might need to
adjust the audio sync delay to synchronise the audio
to the video. On the HTS, increase the delay value
until there is a match between picture and sound. A
delay value of 180ms may be required. Read the user
manual of the HTS. With a delay value set up on the
HTS, you need to switch off Audio Out Delay on the
TV.
Audio out levelling
Use the Audio Out Levelling setting to level the
volume (loudness) of the TV and the Home Theatre
System when you switch over from one to another.
Volume differences can be caused by differences in
sound processing.
To level the difference in volume…
To switch off Audio Out Delay…
1. Press , select Sound and press  (right) to
enter the menu.
2. Select Advanced > Audio out delay and
press OK.
3. Select Off.
4. Press  (left) repeatedly if necessary, to close the
menu.
1. Press , select Sound and press  (right) to
enter the menu.
2. Select Advanced > Audio out levelling and
press OK.
3. Select More, Medium, or Less, then press OK.
4. If the volume difference is large, select More. If the
volume difference is small, select Less.
5. Press  (left) repeatedly if necessary, to close the
menu.
Audio out offset
Audio Out Levelling affects both the Audio Out Optical and HDMI ARC sound signals.
If you cannot set a delay on the Home Theatre
System, you can set the TV to sync the sound. You
can set an offset that compensates for the time
necessary for the Home Theatre System to process
the sound of the TV picture. You can set the value in
steps of 5ms. Maximum setting is -60ms.
Problems with HTS sound
Sound with loud noise
If you watch a video from a plugged in USB flash drive
or connected computer, the sound from your Home
Theatre System might be distorted. This noise is heard
when the audio or video file has DTS sound but the
Home Theatre System has no DTS sound processing.
You can fix this by setting the Audio out format of
the TV to Stereo.
The Audio out delay setting should be switched on.
To synchronise the sound on the TV…
1. Press , select Sound and press  (right) to
enter the menu.
2. Select Advanced > Audio out offset and
press OK.
3. Use the slider bar to set the sound offset and
press OK.
4. Press  (left) repeatedly if necessary, to close the
menu.
Press  for
format.
Sound >
Advanced >
Audio out
No sound
If you cannot hear the sound from the TV on your
Home Theatre System, check the following . . .
Audio out format
- Check if you connected the HDMI cable to a HDMI
1 ARC connection on the Home Theatre System.
- Check if the HDMI 1 ARC setting on the TV is
switched On.
Press  for Sound > Advanced > HDMI 1-ARC.
If you have a Home Theatre System (HTS)
with multichannel sound processing capabilities like
Dolby Digital, DTS® or similar, set the Audio Out
Format to Multichannel. With Multichannel, the TV
can send the compressed multichannel sound signal
from a TV channel or connected player to the Home
Theatre System. If you have a Home Theatre System
without multichannel sound processing, select Stereo.
4.5
Blu-ray disc player
To set Audio out format…
Use a High speed HDMI cable to connect the Bluray Disc player to the TV.
1. Press , select Sound and press  (right) to
enter the menu.
2. Select Advanced > Audio out format and
press OK.
3. Select Multichannel or Stereo, then press OK.
4. Press  (left) repeatedly if necessary, to close the
menu.
11
If the Blu-ray Disc player has EasyLink HDMI CEC,
you can operate the player with the TV remote
control.
To adjust the volume…
1. Press , select Sound > Headphone volume and
press OK.
2. Press the arrows  (up) or  (down) to adjust
the value.
3. Press  (left) repeatedly if necessary, to close the
menu.
4.6
DVD player
Use an HDMI cable to connect the DVD player to the
TV.
Alternatively, you can use a SCART cable, if the
device has no HDMI connection.
4.8
Game console
HDMI
For best quality, connect the game console with a
High speed HDMI cable to the TV.
If the DVD player is connected with HDMI and has
EasyLink CEC, you can operate the player with the TV
remote control.
For more information on EasyLink, in Help, see
chapter Settings > General settings > EasyLink.
4.7
Scart
Headphones
If your game console only has Video (CVBS) and
Audio L/R output, use a Video Audio L/R to SCART
adapter (sold separately) to connect to the SCART
connection.
You can connect a set of headphones to
the  connection on the side of the TV. The
connection is a mini-jack 3.5mm. You can adjust the
volume of the headphones separately.
12
TV, you cannot use the stored recordings on another
TV or PC. Do not copy or change recording files on
the USB Hard Drive with any PC application. This will
corrupt your recordings. When you format another
USB Hard Drive, the content on the former will be lost.
A USB Hard Drive installed on your TV will need
reformatting for use with a computer.
Ideal setting
Before you start playing a game from a connected
game console, we advice you to set the TV in the
ideal setting Game.
When you finish playing a game and start watching
TV again, remember to switch the Game or
computer setting back to Off.
Formatting
To set the TV to the ideal setting…
1. Press , select Picture and press  (right) to
enter the menu.
2. Select Advanced > Game or computer, and
select the device type you want to use. To switch
back to TV, select Off.
3. Press  (left) repeatedly if necessary, to close the
menu.
Before you can pause or record a broadcast, you
must connect and format a USB Hard Drive.
Formatting removes all files from the USB Hard Drive.
Warning
The USB Hard Drive is formatted exclusively for this
TV, you cannot use the stored recordings on another
TV or PC. Do not copy or change recording files on
the USB Hard Drive with any PC application. This will
corrupt your recordings. When you format another
USB Hard Drive, the content on the former will be lost.
A USB Hard Drive installed on your TV will need
reformatting for use with a computer.
4.9
USB hard drive
What you need
To format a USB Hard Drive…
If you connect a USB Hard Drive, you can pause or
record a TV broadcast. The TV broadcast must be a
digital broadcast (DVB broadcast or similar).
1. Connect the USB Hard Drive to the USB connection
on the TV.
2. Switch on the USB Hard Drive and the TV.
3. When the TV is tuned to a digital TV channel, press
 (Pause). Trying to pause will start the formatting.
Follow the instructions on screen.
To Pause
To pause a broadcast, you need a USB compatible
Hard Drive with a minimum of 4GB disk space.
When the USB Hard Drive is formatted, leave it
connected permanently.
To Record
To pause and record a broadcast, you need a
minimum of 32GB disk space.
4.10
For more information, in Help, see
chapter Recording and pause TV.
USB flash drive
You can view photos or play your music and videos
from a connected USB flash drive.
Installation
Insert a USB flash drive in the USB connection on
the TV while the TV is switched on.
Before you can pause or record a broadcast, you
must connect and format a USB Hard Drive.
Formatting removes all files from the USB Hard Drive.
1. Connect the USB Hard Drive to
the USB connection on the TV.
2. Switch on the USB Hard Drive and the TV.
3. When the TV is tuned to a digital TV channel,
press  (Pause). Trying to pause will start the
formatting.
The TV detects the flash drive and opens a list
showing its content.
If the contents list does not appear automatically,
press  SOURCES and select USB.
Follow the instructions on screen.
When the USB Hard Drive is formatted, leave it
connected permanently.
To stop watching the USB flash drive content,
press  EXIT or select another activity.
To disconnect the USB flash drive, you can pull out
the flash drive anytime.
Warning
The USB Hard Drive is formatted exclusively for this
13
For more information on watching or playing content
from a USB flash drive, in Help, see chapter Photos,
videos and music.
4.11
Photo camera
To view photos stored on your digital photo camera,
you can connect the camera directly to the TV.
Use the USB connection on the TV to connect.
Switch on the camera after you made the connection.
With DVI to HDMI
If the contents list does not appear automatically,
press  SOURCES , and select USB.
Your camera might need to be set to transfer its
content with PTP (Picture Transfer Protocol). Read
the user manual of the digital photo camera.
Alternatively, you can use a DVI to HDMI adapter
(sold separately) to connect the PC to HDMI and an
audio L/R cable (mini-jack 3.5mm) to AUDIO IN L/R
on the back of the TV.
For more information on watching or playing content
from a USB flash drive, in Help, see chapter Photos,
videos and music.
Ideal setting
4.12
If you connect a computer, we advice you to give the
connection, on which the computer is connected, the
correct device type name in the Source menu. If you
then switch to Computer in the Source menu, the TV
is set to the ideal Computer setting automatically.
Camcorder -HDMI
You can manually switch the ideal setting to Off for
watching TV or Game for playing a game from a
connected game console (remember to switch back
to Off when you stop playing a game).
For best quality, use an HDMI cable to connect the
camcorder to the TV.
If you switch to a source and change the Game or
computer setting, it will be stored for this selected
source.
To set the TV to the ideal setting…
1. Press , select Picture and press  (right) to
enter the menu.
2. Select Advanced > Game or computer, and
press OK.
3. Select Game (for gaming) or
select Computer (for watching a movie).
4. Press  (left) repeatedly if necessary, to close the
menu.
4.13
Remember to set Game or computer setting to
Off when you stop playing the game.
Computer
Connect
4.14
You can connect your computer to the TV and use
the TV as a PC monitor.
Bluetooth sound station (for
5231/5242 series TV)
With HDMI
Use an HDMI cable to connect the computer to the
TV.
14
 Warning
What you need
Do not put bluetooth sound station on soft surface,
that will impact the audio play effect.
You must press bluetooth button on the top of the
bluetooth sound station, then you can turn on the
device.
Launch via source menu
1. Press  SOURCES on the remote control, then
select Bluetooth.
2. Turn on Bluetooth on your Bluetooth devices, such
as smartphones, tablets or even laptops.
3. Search bluetooth sound station on your Bluetooth
device, then select the item starts with "Philips TV
2016A...".
3. The LED on bluetooth sound station will light blue.
4. Bluetooth is connected and ready to play music
from your Bluetooth device.
5. Select one song on your Bluetooth device, then
you will hear the sound from bluetooth sound station.
Attention - Audio to Video syncronisation
Many Bluetooth speaker systems have a high, so
called, 'latency'. High latency means that the audio
lags behind the video, causing unsynchronised 'lip
sync'. Before you purchase a wireless Bluetooth
speaker system, inform yourself about the newest
models and look for a device with a low latency
rating. Ask your dealer for advice.
 Warning
Do not put bluetooth sound station on soft surface,
that will impact the audio play effect.
Turn on or off
To turn the sound station on...
Connect via audio cable
1. Press  SOURCES, select Bluetooth and
press OK.
2. The Bluetooth LED indicator will light blue.
3. You can share music from your bluetooth
devices, such as smartphones, tablets or even
laptops.
1. Connect your AUX compatible device with TV on
port AUDIO IN (DVI/VGA/AUX).
2. Select one song on your Bluetooth device, then
you will hear the sound from bluetooth sound station.
Connect via Bluetooth
Launch via bluetooth button
1. Press Bluetooth button on the top of bluetooth
sound station.
2. Turn on Bluetooth on your Bluetooth devices, such
as smartphones, tablets or even laptops.
3. Search bluetooth sound station on your Bluetooth
device, then select the item starts with "Philips TV
2016A...".
3. The LED on bluetooth sound station will light blue.
4. Bluetooth is connected and ready to play music
from your Bluetooth device.
5. Select one song on your Bluetooth device, then
you will hear the sound from bluetooth sound station.
 Warning
Do not put bluetooth sound station on soft surface,
that will impact the audio play effect.
15
5
5.3
Switching On and
Off
Switch off timer
If the TV receives a TV signal but you don't press a
key on the remote control during a 4 hour period, the
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal nor a remote
control command for 10 minutes, the TV switches off
automatically.
5.1
On or standby
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
5231 series TV
Before you switch on the TV, make sure you plugged
in the mains power in the POWER connector on the
back of the TV.
To deactivate the Switch Off Timer …
1. Press , select Eco settings and press  (right)
to enter the menu.
2. Select Switch off timer and press OK.
3. Press the arrows  (up) or  (down) to adjust
the value. The value 0 deactivates the automatic
switch off.
4. Press  (left) repeatedly if necessary, to close the
menu.
Switch On
If the indicator light is off, press the power button on
the top of the bluetooth sound station to switch on
the TV - the red indicator will goes off.
For more information on environmentally friendly TV
settings, see chapter Settings > Eco settings.
When the TV in standby, press  on the remote
control to switch the TV on.
Switch to standby
To switch the TV to standby, press  on the remote
control.
To switch off the TV completely, disconnect the
power plug.
When disconnecting the power plug, always pull the
power plug, never the cord. Ensure that you have full
access to the power plug, power cord and outlet
socket at all times.
5.2
Sleep timer
With the Sleep timer, you can set the TV to switch to
Standby automatically after a preset time.
To set the Sleep timer…
1. Press , select General settings > Sleep
timer and press OK.
2. With the slider bar you can set the time to up to 180
minutes in increments of 5 minutes. If set to 0
minutes, the Sleep Timer is switched off. You can
always switch off your TV earlier or reset the time
during the countdown.
3. Press  (left) repeatedly if necessary, to close the
menu.
16
To open or close the Sources menu - the list of
connected devices.
6
Remote control
2. Colour keys
The buttons function follow the on-screen
instructions.
6.1
Key overview
3.  INFO
To open or close programme infomation.
Top
4.  BACK
To switch back to the previous channel you selected.
To close a menu without changing a setting.
5.  HOME
To open or close the home menu.
6.  EXIT
To switch back to watching TV.
7.  OPTIONS
To open or close the Options menu.
8. OK key
To confirm a selection or setting.
1.  Standby / On
To switch the TV on or back to Standby.
9. Arrow / navigation keys
To navigate up, down, left or right.
2. Playback keys
- Play , to playback
- Pause , to pause playback
- Stop , to stop playback
- Rewind , to rewind
- Fast forward , to go fast forward
- Record , to record now
10.  LIST
To open or close the channel list.
Bottom
3.  TV GUIDE
To open or close the TV Guide.
4.  SETUP
To open the Settings menu.
5.  FORMAT
To open or close the Picture format menu.
Middle
1.  Volume
To adjust the volume level.
2. Number keys and text keypad
To select a TV channel directly or to enter text.
3. SUBTITLE
To switch subtitles on, off or Automatic.
4.  Channel
To switch to the next or previous channel in the
channel list. To open the next or previous page in
Text/Teletext. To start the next or previous chapter on
a disc.
5.  Mute
To mute the sound or to restore it.
1.
 SOURCES
6. TEXT
17
To open or close Text / Teletext.
the - ends of the batteries line up correctly.
3. Reposition the battery door and slide it back until it
clicks.
4. Remove the batteries if you are not using the
remote control for a long time.
6.2
IR sensor (for
4031/5231/5242 series TV)
Safely dispose of your old batteries according to the
end of use directions.
For more information, in Help, see
chapter Specifications > Environmental > End of
use.
The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point
the remote control at the infrared sensor on the front
of the TV.
6.5
Cleaning
Your remote control is treated with a scratch-resistant
coating.
To clean the remote control, use a soft damp cloth.
Never use substances such as alcohol, chemicals or
household cleaners on the remote control.
 Warning
Do not put any objects in front of IR sensor of the TV,
it may block the IR signal.
6.3
IR sensor (for 4131 series TV)
The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point
the remote control at the infrared sensor on the front
of the TV.
 Warning
Do not put any objects in front of IR sensor of the TV,
it may block the IR signal.
6.4
Batteries
If the TV does not react on a key press on the remote
control, the batteries might be empty.
To replace the batteries, open the battery
compartment on the back of the remote control.
1. Slide the battery door in the direction shown by the
arrow.
2. Replace the old batteries with 2
type AAA-R03-1.5V batteries. Make sure the + and
18
7
Filter a channel list
Channels
7.1
You can filter a list with all channels. You can set the
channel list to show only TV channels or only Radio
stations.
Switch channels
To set a filter on a list with all channels…
1. While watching a TV channel, press  LIST to
open the channel list.
2. Press  OPTIONS to open Option menu.
3. Select List, then you can
select All, Favourites, Radio, and New channels.
- To watch TV channels, press . The TV tunes to
the TV channel you last watched.
- Alternatively, press  Home to open the Home
menu and select Channels and press OK.
- To switch channels, press  + or  -. If you
know the channel number, type in the number with
the number keys. Press OK after you entered the
number to switch channels.
- To switch back to the previously tuned channel,
press  BACK .
Rename a channel
You can rename channels in the channel list.
1. Select the channel you want to rename in one of
the channel lists.
2. Select the channel to rename.
3. Press  Rename.
4. You can enter text with the on-screen keyboard.
5. To finish renaming, select Done and press OK.
To switch to a channel from a channel list
- While watching a TV channel, press  LIST to
open the channel lists.
- The channel list can have several pages with
channels. To view the next or previous page,
press  + or  -.
- To close the channel lists without switching
channels, press  LIST again.
Lock a channel
Channel icons
Lock and unlock a channel
After an Automatic channel update of the channel list,
newly found channels are marked with a  (star).
If you lock a channel, it will be marked with
a  (lock).
To prevent children from watching a channel or a
programme, you can lock channels or lock age rated
programmes.
Radio channels
You can lock a channel to prevent children from
watching it. To watch a locked channel you need to
enter the Child lock code. You cannot lock
programmes from connected devices.
If digital broadcasting is available, digital radio
stations are installed during installation. Switch to a
radio channel just like you switch to a TV channel.
To lock a channel . . .
This TV can receive digital television standard DVB .
TV may not work properly with some operators of
digital television , non-compliance with requirements
of the standard in full.
1. While watching a TV channel, press  LIST to
open the channel list.
2. In any list, select the channel you want to lock.
3. Press  OPTIONS and select Lock channel. In a
channel list, a locked channel is marked with a
lock .
7.2
Channel lists
To unlock a channel, select the locked channel in the
channel list, press  OPTIONS , then
select Unlock channel. You will need to enter the
Child lock code.
Open a channel list
To open the current channel list…
1. Press , to switch to TV.
2. Press  LIST to open the current channel list.
3. Press  LIST again to close the channel list.
Parental rating
To prevent children from watching a programme not
suitable for their age, you can use an age rating.
Some digital broadcasters have age rated their
programmes. When the age rating of a programme is
equal to or higher than the age you have set as age
19
rating for your child, the programme will be locked.
To watch a locked programme you must enter the
child lock code. The parental age rating is set for all
channels.
Remove channel from the favourites list
To remove a channel from the favourites list, select
the channel with , then press  Unmark as
favourite again to unmark as favourite.
To set an age rating . . .
1. Press , select Child lock and press  (right) to
enter the menu.
2. Select Parental rating and press  (right) to
enter the menu.
3. Enter a 4-digit Child lock code. Enter a 4-digit
Child lock code and confirm. Now you can set an age
rating.
4. Set the age and press OK. To switch off the
parental age rating, select None as age setting.
5. Press  (left) repeatedly if necessary, to close the
menu.
Reorder channels
You can reorder — reposition — channels in the
Favourite channel list.
1. While watching a TV channel, press  LIST to
open the channel list.
2. Press  OPTIONS to open Option menu.
3. Select List, select Favourites, and press OK.
4. Press  Move.
5. Select the channel to reorder and press OK.
6. Press the Navigation buttons to move the
highlighted channel to another location and
press OK.
7. Once complete, press  Close to exit from
the Favourite channel list.
The TV will ask for the code to unlock the programme.
For some broadcasters / operators, the TV only locks
programmes with a higher rating.
Set or change the lock code
To set the lock code or to change the current code . . .
1. Press , select Child lock and press  (right) to
enter the menu.
2. Select Change code and press  (right) to enter
the menu.
3. If a code is set already, enter the current Child lock
code and then enter the new code twice.
4. Press  (left) repeatedly if necessary, to close the
menu.
7.3
Channel options
Open options
While watching a channel, you can set some options.
Depending on the type of channel you are watching
(analogue or digital) or depending on the TV settings
you made, some options are available.
The new code is set.
Forgotten your code?
To open the options menu…
To override and enter a new child lock code in case
you forget it, enter 8888.
1. While watching a channel, press  OPTIONS.
2. Press  OPTIONS again to close.
Favourite channels
Subtitles
About favourite channels
Switch on
You can create a favourite channel list that only holds
the channels you want to watch. With the Favourite
channel list selected, you will only see your favourite
channels when you switch through channels.
To switch on Subtitles, press SUBTITLE.
You can switch
subtitles Subtitle on or Subtitle off . Alternatively
you can select Automatic.
Create a favourites list
Automatic
1. While watching a TV channel, press  LIST to
open the channel list.
2. Select the channel, and press  Mark as
favourites to mark as favourite.
3. The selected channel is marked with a .
4. To finish, press  BACK . The channels are added
to the Favourites list.
If language information is part of the digital broadcast
and the broadcasted programme is not in your
language (the language set on TV), the TV can show
subtitles automatically in one of your preferred
subtitle languages. One of these subtitle languages
must also be part of the broadcast.
You can select your preferred subtitle languages
in Subtitle language.
20
2. Select Languages and press  (right) to enter
the menu.
3. Select Primary
audio language or Secondary audio language,
and press OK.
4. Select the language you need and press OK.
5. Press  (left) repeatedly if necessary, to close the
menu.
Preferred subtitle languages
A digital broadcast can offer several subtitle
languages for a programme. You can set a preferred
primary and secondary subtitle language. If subtitles
in one of these languages are available, the TV will
show the subtitles you selected.
To set the primary and secondary subtitle language…
1. Press , select General settings and
press  (right) to enter the menu.
2. Select Languages and press  (right) to enter
the menu.
3. Select Primary subtitle language or Secondary
subtitle language, and press OK.
4. Select the language you need and press OK.
5. Press  (left) repeatedly if necessary, to close the
menu.
Select an audio language
If none of the preferred audio languages are
available, you can select another audio language if
available. If no audio languages are available, you
cannot select this option.
To select an audio language when none of your
preferred languages are available…
1. Press  OPTIONS.
2. Select Audio language and select one of the
languages as audio temporarily.
Select a subtitle language
If none of the preferred subtitle languages are
available, you can select another subtitle language if
available. If no subtitle languages are available, you
cannot select this option.
Dual I-II
If an audio signal contains two audio languages but
one language or both has no language indication, this
option is available.
To select a subtitle language when none of your
preferred languages are available…
1. Press  OPTIONS.
2. Select Subtitle language and select one of the
languages as subtitles temporarily.
Common Interface
Subtitles for analogue channels
If prepaid premium content is available from a CAM,
you can set the provider settings with this option.
For analogue channels, you need to make the
subtitles available for each channel manually.
1. Switch to a channel and press TEXT to open Text.
2. Enter the page number for subtitles, usually 888.
3. Press TEXT again, to close Text.
Mono / Stereo
You can switch the sound of an analogue channel to
Mono or Stereo.
If you select On in the Subtitle menu when watching
this analogue channel, subtitles will be shown if
available.
To know if a channel is analogue or digital, switch to
the channel and open Status in the Options menu.
To switch to Mono or Stereo…
1. Tune to an analoge channel.
2. Press  OPTIONS, select Mono/Stereo and
press  (right).
3. Select Mono or Stereo and press OK.
4. Press  (left) repeatedly if necessary, to close the
menu.
Audio language
Preferred audio language
A digital broadcast can offer several audio languages
(spoken languages) for a programme. You can set a
preferred primary and secondary audio language. If
audio in one of these languages is available, the TV
will switch to the audio language.
Clock
Display time on the corner of the TV screen.
To set the primary and secondary audio language…
1. Press , select General settings and
press  (right) to enter the menu.
21
display correctly.
Status
- Text 2.5
To activate the Text 2.5 for more colours and better
graphics.
Select Status to view technical information on the
channel (if it is analogue or digital) or a connected
device you are watching.
7.4
Text setup
Text / Teletext
Text language
Text pages
Some digital TV broadcasters have several Text
languages available.
To set your primary and secondary Text language . . .
To open Text/Teletext press TEXT, while you are
watching TV channels.
To close Text, press TEXT again.
1. Press , select General settings and
press  (right) to enter the menu.
2. Select Languages and press  (right) to enter
the menu.
3. Select Primary teletext or Secondary teletext ,
and press OK.
4. Select the language you need and press OK.
5. Press  (left) repeatedly if necessary, to close the
menu.
Select a Text page
To select a page . . .
1. Enter the page number with the number keys.
2. Use the arrow keys to navigate.
3. Press a colour key to select a colour-coded subject
at the bottom of the screen.
Text 2.5
Text sub-pages
If available, Text 2.5 offers more colours and better
graphics. Text 2.5 is activated as a standard factory
setting.
To switch off Text 2.5…
A Text page number can hold several subpages. The
subpage numbers are shown on a bar next to the
main page number.
To select a subpage, press  or .
1. Press TEXT.
2. With Text/Teletext open on screen,
press  OPTIONS.
3. Select Text 2.5 > Off.
4. Press  (left) repeatedly if necessary, to close the
menu.
T.O.P. Text pages
Some broadcasters offer T.O.P. Text.
To open T.O.P. Text pages within Text,
press  OPTIONS and select T.O.P. overview.
Text options
In Text/Teletext, press  OPTIONS to select the
following…
- Freeze page
To stop the automatic rotation of subpages.
- Dual screen / Full screen
To show the TV channel and Text alongside each
other.
- T.O.P. overview
To open T.O.P. Text.
- Enlarge
To enlarge the Text page for comfortable reading.
- Reveal
To unhide hidden information on a page.
- Cycle subpages
To cycle subpages when these are available.
- Language
To switch the group of characters that Text uses to
22
8
Change day
TV Guide
The TV guide can show scheduled programmes for
the upcoming days (maximum up to 8 days).
8.1
If the TV guide information comes from the
broadcaster, you can press  + to view the
schedule of one of the next days. Press  - to go
back to the previous day.
Alternatively, you can press  OPTIONS and
select Change day.
Select Previous day, Today or Next day and
press OK, to select the day of the schedule.
What you need
With the TV guide you can view a list of the current
and scheduled TV programmes of your channels.
Depending on where the TV guide information (data)
is coming from, analogue and digital channels or only
digital channels are shown. Not all channels offer TV
guide information.
The TV can collect TV guide information for the
channels that are installed on the TV (e.g the
channels you watch with Watch TV). The TV cannot
collect the TV guide information for channels viewed
from a digital receiver.
Set a reminder
You can set a reminder for a programme. A message
will alert you at the start of the programme. You can
tune to this channel immediately.
In the TV Guide a programme with a reminder is
marked with a  (clock).
8.2
Using the TV guide
To set a reminder…
1. Press  TV GUIDE and select an upcoming
programme.
2. Press  Set reminder and press OK.
Open the TV guide
To open the TV guide, press  TV GUIDE.
To clear a reminder…
Press  TV GUIDE again to close.
1. Press  TV GUIDE and select a programme with
the reminder, which is marked with a  (clock).
2. Press  Clear reminder, and select Yes, then
press OK.
The first time you open the TV guide, the TV scans all
TV channels for programme information. This may
take several minutes. TV guide data is stored in the
TV.
Search by genre
Tune to a programme
If the information is available, you can look up
scheduled programmes by genre like movies, sports,
etc.
Switch to a programme
From the TV guide, you can switch to a current
programme.
To select a programme, use the arrow keys to
highlight the programme name.
Navigate to the right to view programmes scheduled
later that day.
To switch to the programme (channel), select the
programme and press OK.
To search for programmes by genre,
press  OPTIONS and select Search by genre.
Select a genre and press OK. A list with the found
programmes appears.
List of reminders
View programme details
You can view a list of the reminders you have set.
To call up the details of the selected programme,
press  INFO .
List of Reminders
To open the list of reminders…
1. Press  TV GUIDE.
2. Press  OPTIONS and select All reminders.
3. In the list of reminders, select Clear selected and
press  (right) to select the reminder you want to
remove.
23
4. Select Close to close the list of reminders.
Set a recording
You can set a recording in the TV Guide.
In the TV Guide, a programme set to be recorded is
marked with  .
To see the recording list, press  Recordings , a
programme set to be recorded is marked with
a  (red dot) on the front of the programme name.
To record a programme…
1. Press  TV GUIDE and select a future or ongoing
programme.
2. Press the colour key  Record .
To cancel a recording…
1. Press  TV GUIDE and select the programme set
for recording.
2. Press the colour key  Clear Recording .
24
What you need
1. Press  TV GUIDE.
2. On the TV guide, select the channel and
programme you wish to record. Press  (Right)
or  (Left) to scroll through the programmes of a
channel.
3. With the programme highlighted, press the colour
key  Record . The programme is scheduled for
recording. A warning will show automatically when
overlapping recordings are scheduled. If you plan to
record a programme in your absence, remember to
leave the TV switched to Standby and the USB Hard
Drive switched on.
You can record a digital TV broadcast and watch it
later.
List of recordings
9
Recording and
pause TV
9.1
Recording
To record a TV programme you need…
You can view and manage your recordings in the list
of recordings. Next to the list of recordings, there is a
separate list for scheduled recordings and reminders.
- a connected USB Hard Drive formatted on this TV
- digital TV channels installed on this TV
- to receive channel information for the on screen TV
Guide
- a reliable TV clock setting. If you reset the TV clock
manually, recordings may fail.
To open the list or recordings…
1. Press  TV GUIDE.
2. Press the colour key  Recordings .
3. In the list of recordings, select the
tabs New, Watched or Expired and press OK to
filter your view.
4. With a recording selected in the list, you can
remove the recording with the colour
key  Remove or stop an ongoing recording
with the colour key  Stop Recording . You can
rename a recording with the colour key  Rename.
You cannot record when you are using Pause TV.
In terms enforcement of copyright legislation, some
DVB providers can apply different restriction by
means of DRM (Digital Right Management)
technology. In case of broadcasting protected
channels, recording, record validity or number of
views may be restricted. Recording may be
completely prohibited. In case of trying to record a
protected broadcasting or play back an expired
recording, an error message can appear.
Broadcasters can limit the number of days a recording
can be viewed. When this period expires, the
recording will be marked as expired. A recording in
the list can show the number of days before it expires.
When a scheduled recording was prevented by the
broadcaster or when the broadcast was interrupted, a
recording is marked as Failed.
Record a programme
Record now
To record the programme you are watching right now,
press  (Record) on the remote control. The
recording will start immediately.
Manual recording
You can schedule a recording that is not linked to a
TV programme. You set the tuner type, channel and
the start and end time yourself.
To stop the recording, press  (Stop).
When TV Guide data is available, the programme you
are watching will be recorded from the moment you
pressed the recording key until the programme
ends. If no TV Guide data is available, the recording
will only last 30 minutes. You can adjust the end time
of the recording in the list of Recordings.
To schedule a recording manually…
1. Press  TV GUIDE.
2. Press the colour key  Recordings .
3. At the top of the screen, select  Scheduled and
press OK.
4. Press  OPTIONS, select Schedule and
press OK.
5. Select the tuner from where you want to record
and press OK.
6. Select the channel to record from and press OK.
7. Select the day of the recording and press OK.
8. Set the start and end time of the recording. Select a
button and use the  (up) or  (down) keys to
Schedule a recording
You can schedule a recording of an upcoming
programme for today or a few days from today
(maximum of 8 days away). The TV will use the data
from the TV Guide to start and end the recording.
To record a programme…
25
set the hours and minutes.
9. Select Schedule and press
manual recording.
To switch back to the live TV broadcast,
press  (Stop).
OK to schedule the
The recording will appear in the list of scheduled
recordings and reminders.
Replay
Watch a recording
Since the TV stores the broadcast you are watching,
you can mostly replay the broadcast for a few
seconds.
To watch a recording…
To replay a current broadcast…
1. Press  TV GUIDE.
2. Press the colour key  Recordings .
3. In the list of recordings, select the recording you
need and press OK to start watching.
4. You can use the
keys  (pause),  (play),  (rewind),  (fast
forward) or  (stop).
5. To switch back to watch TV, press  EXIT.
1. Press  (Pause)
2. Press  (Rewind). You can press  repeatedly
to select from where you want to start viewing the
paused broadcast. Press these keys repeatedly to
change speed. At one point you will reach the start of
the broadcast storage or the maximum time span.
3. Press  (Play) to watch the broadcast again.
4. Press  (Stop) to watch the broadcast live.
9.2
Pause TV
What you need
You can pause a digital TV broadcast and resume
watching it a bit later.
To pause a TV programme you need…
- a connected USB Hard Drive formatted on this TV
- digital TV channels installed on this TV
- to receive channel information for the on screen TV
Guide
With the USB Hard Drive connected and formatted,
the TV continuously stores the TV broadcast you are
watching. When you switch to another channel, the
broadcast of the former channel is cleared. Also
when you switch the TV to standby the broadcast is
cleared.
You cannot use Pause TV when you are recording.
Pause a programme
To pause and resume a broadcast…
To pause a broadcast, press  (Pause). A progress
bar at the bottom of the screen appears briefly.
To call up the progress bar, press  (Pause) again.
To resume watching, press  (Play).
With the progress bar on screen, press  (Rewind)
or press  (Forward) to select from where you want
to start viewing the paused broadcast. Press these
keys repeatedly to change speed.
You can pause a broadcast for a maximum time span
of 90 minutes.
26
10
Home menu
10.1
About the Home menu
Channels
This row contains all channles.
Sources
This row contains available sources in this TV.
Utilities
This row contains TV functions which are available for
user.
Quick settings
This row contains settings which are available for
user.
10.2
Open the Home menu
To open the Home menu and open an item…
1 - Press  Home .
2 - Select an item and press OK to open or start it.
3 - Press  BACK to close the Home menu
without starting anything.
27
clear. A game console can have a built-in Blu-ray
Disc player and the type is set to Player because it is
used as a disc player most of the time. For this kind of
devices, you can temporarily switch to the ideal
settings for gaming. Or alternatively, switch to the
ideal settings for a connected computer.
11
Sources
11.1
Switch to a device
You can only use the setting Game or
Computer when you switch to a connected device in
the Sources menu. The Game or Computer setting is
stored for the selected device.
Sources menu
To open the Sources menu, press  SOURCES .
To switch to a connected device, select the device
with the arrows  (left) or  (right) and press OK.
To close the Source menu without switching to a
device, press  SOURCES again.
To switch to the ideal settings for gaming or computer
manually…
1. Press , select Picture > Advanced > Game or
computer and press OK.
2. Select Game, Computer or Off.
3. Press  (left) repeatedly if necessary, to close the
menu.
One Touch Play
With the TV in standby, you can switch on a disc
player with your TV remote control.
To switch on both disc player and TV from standby
and start playing the disc immediately,
press  (play) on the TV remote control. The device
must be connected with an HDMI cable and both TV
and device must have HDMI CEC switched on.
Remember to set this setting back to TV when you
stop playing the game.
11.2
Options for a TV Input
Some TV input devices offer specific settings.
To set the options for a specific TV input…
1. Press  SOURCES.
2. Select the TV input in the list and press OK.
3. Press  OPTIONS. You can set the options for
the selected TV input here.
4. Press  OPTIONS again to close the Options
menu.
Possible options…
Controls
With this option you can operate the connected
device with the TV remote control. The device must
be connected with an HDMI cable and both TV and
device must have HDMI CEC switched on.
Device Info
Open this option to view information on the
connected device.
11.3
Game or computer
The device type determines picture and sound styles,
resolution values and other specifics. You don't have
to worry about the ideal settings.
For some devices the type of the device is not that
28
To show the progress bar when a video is playing,
press  INFO.
Press again to hide the info.
12
Videos, photos and
music
Video options
12.1
During the video playback, press  OPTIONS to…
From a USB connection
Subtitles
Display the subtitles if available, select On, Off, or On
during mute.
You can view your photos or play your music and
videos from a connected USB flash drive or USB Hard
Drive.
Audio language
Play the audio language if available.
With the TV switched on, plug in a USB flash drive or a
USB Hard Drive to one of the USB connections. The
TV detects the device and will list your media files.
Repeat, Play once
Play videos repeatedly or once.
If the list of files does not appear automatically…
Shuffle on, Shuffle off
Play videos in sequence or at random.
1. Press  SOURCES, select  USB and
press OK.
2. Select  and press  (right) to select the USB
device you need.
3. You can browse your files in the folder structure
you have organised on the drive.
4. To stop playing videos, photos and music,
press  EXIT.
Show info
Display file information, like sound mode.
Subtitle settings
Set subtitle colour, font size, position, time sync
offset if available.
Warning
If you try to pause or record a programme with a USB
Hard Drive connected, the TV will ask you to format
the USB Hard Drive. This formatting will delete all
current files on the USB Hard Drive.
12.3
View your photos
View photos
12.2
How you open the list of your media files on TV
depends on the type of device where the files are
stored. See the chapters above.
Play your videos
To view all photos on TV…
Play videos
Select  Photos , and select All and press
How you open the list of your media files on TV
depends on the type of device where the files are
stored. See the chapters above.
OK.
To view a photo on TV…
Select  Photos , and select the file name and
press OK.
To play a video on TV…
To start a slide show on TV…
Select  Videos , and select the file name and
press OK.
If there are several photos in a folder, you can start a
slide show.
- To pause the video, press OK. Press OK again to
continue.
- To rewind or go fast forward, press  or . Press
the keys several times to speed up - 2x, 4x, 8x, 16x,
32x.
- To jump to the next video in a folder, press OK to
pause and select  on screen and press OK.
- To stop the video playback, press  (Stop).
- To go back to the folder, press .
To start a slide show…
1. Select the folder with photos.
2. Press the colour key  Slide Show .
- To jump to the next or previous
photo, press  (right - next) or  (left - previous).
- To pause the slide show, press OK. To start again,
press OK again.
- To stop the slide show, press OK and press .
Progress Bar
Info
29
To view info on a photo (size, creation date, file path,
etc.), select a photo and press  INFO.
Press again to hide the info.
Play music
How you open the list of your media files on TV
depends on the type of device where the files are
stored. See the chapters above.
Slideshow with music
To play a song on TV…
You can watch a slideshow of your photos and listen
to your music at the same time. You must start the
usic before you start the photo slideshow.
Select  Music , and select the file name and
press OK
If there are several songs in a folder, you can listen to
them one after the other.
To play music with the slide show…
1. Select a song or a folder with songs and press OK.
2. Press  INFO to hide file info and progress bar.
3. Press .
4. Now use the navigation arrows to select the folder
with photos.
5. Select the folder with photos and press  Slide
Show.
6. To stop the slideshow, press .
- To pause a song, press OK. Press OK again to
continue.
- To rewind or go fast forward, press  or . Press
the keys several times to speed up - 2x, 4x, 8x, 16x,
32x.
- To jump to the next or previous song,
press  + or  - .
- To make a 10-second jump in a song or 10-second
jump back, press  or .
- To go back to the folder, press , the music will
keep on playing.
- To stop the music playback, press  (Stop).
Photo options
With a photo on screen, press  OPTIONS to…
Progress Bar
Start slideshow, Stop slideshow
Start or stop slideshow.
To show the progress bar when a song is playing
(playhead position, duration, title, date, etc.),
press  INFO .
Press again to hide the info.
Slideshow transitions
Set the transition from one picture to the next.
Slideshow frequency
Select the display time for each photo.
Music options
Repeat, Play once
View the pictures repeatedly or once only.
Options for playing music...
Stop playback
Stop music play.
Shuffle off, Shuffle on
View the pictures in sequential order, or at random.
Repeat, Play once
Play songs repeatedly or once.
Rotate image
Rotate photo.
Shuffle on, Shuffle off
Play songs in sequence or at random.
Show info
Display the picture name, date, size and next picture
in the slide show.
Show info
Display file information, like sound mode.
Stop music
Stop the music playing in the background.
12.4
Play your music
30
13
13.2
Settings
Picture
13.1
Picture style
Quick settings
Select a style
Eco settings
For easy picture adjustment, you can select a preset
Picture Style.
For more information, in Help, see chapter Eco
settings.
1. While watching a TV channel, press .
2. Select Picture > Picture style, and select one of the
styles in the list.
3. Press  (left) repeatedly if necessary, to close the
menu.
Picture style
The available Picture styles are ...
For more information, in Help, see chapter Picture
style.
- Personal - The picture preferences you set during
the first start up.
- Vivid - Ideal for daylight viewing
- Natural - Natural picture settings
- Standard - Most energy conscious setting Factory setting
- Movie - Ideal for watching movies
- Photo - Ideal for viewing photos
- Energy saving - Energy-efficient settings
Picture format
For more information, in Help, see chapter Picture
format.
Sound style
Customise a style
For more information, in Help, see chapter Sound
style.
Any picture setting you adjust, like Colour or Contrast,
is stored in the currently selected Picture style. It
allows you to customise each style.
Headphones volume
For more information, in Help, see
chapter Headphones volume.
Restore a style
The selected style will store the changes you made.
We recommend to adjust the picture settings for the
style Personal only. The Picture Style - Personal can
save its settings for each individual connected device
in Sources menu.
Speakers
For more information, in Help, see chapter TV
speakers.
To restore the style to its original setting…
1. While watching a TV channel, press .
2. Select Picture > Picture style, and select the
Picture Style you want to restore.
3. Press the colour key  Restore style , and press
OK. The style is restored.
4. Press  (left) repeatedly if necessary, to close the
menu.
Clock
For more information, in Help, see chapter Clock.
Sleep timer
For more information, in Help, see chapter Sleep
timer.
Home or Shop
If the Picture style is switched back to Vivid every
time you switch on the TV, the TV location is set
to Shop. A setting meant for in-store promotion.
To set the TV for Home use…
31
1. Press , select General settings and
press  (right) to enter the menu.
2. Select Location > Home and press OK.
3. Press  (left) repeatedly if necessary, to close the
menu.
Advanced picture settings
Game or computer
When you connect a device, the TV recognizes its
type and gives each device a correct type name. You
can change the type name if you wish. If a correct
type name for a device is set, the TV automatically
switches to the ideal TV settings when you switch to
this device in the Sources menu.
Picture settings
Colour
With Colour, you can adjust the colour saturation of
the picture.
If you have a game console with a built-in Blu-ray
Disc player, you might have set the type name to Bluray Disc. With Game or computer you can switch to
the ideal settings for gaming manually. Don't forget to
switch the Game or Computer setting off, when you
return to watch TV.
To adjust the colour…
1. Press , select Picture and press  (right) to
enter the menu.
2. Select Colour and press  (right) .
3. Press the arrows  (up) or  (down) to adjust
the value.
4. Press  (left) repeatedly if necessary, to close the
menu.
To switch to the ideal settings for gaming or computer
manually…
Contrast
1. Press , select Picture > Advanced > Game or
computer and press OK.
2. Select Game, Computer or Off.
3. Press  (left) repeatedly if necessary, to close the
menu.
With Contrast, you can adjust the contrast of the
picture.
Colour settings
To adjust the contrast…
Colour enhancement
1. Press , select Picture and press  (right) to
enter the menu.
2. Select Contrast and press  (right).
3. Press the arrows  (up) or  (down) to adjust
the value.
4. Press  (left) repeatedly if necessary, to close
the menu.
With Colour enhancement, you can enhance the
colour intensity and the details in bright colours.
To adjust the level…
1. Press , select Picture and press  (right) to
enter the menu.
2. Select Advanced > Colour > Colour
enhancement and press OK.
3. Select Maximum, Medium, Minimum or Off.
4. Press  (left) repeatedly if necessary, to close the
menu.
Sharpness
With Sharpness, you can adjust the level of
sharpness in fine detail of the picture.
To adjust the sharpness…
Colour temperature
1. Press , select Picture and press  (right) to
enter the menu.
2. Select Sharpness and press  (right).
3. Press the arrows  (up) or  (down) to adjust
the value.
4. Press  (left) repeatedly if necessary, to close
the menu.
With Colour temperature, you can set the picture to a
preset colour temperature or select Custom to set a
temperature setting yourself with Custom colour
temperature. Colour Temperature and Custom Colour
Temperature are settings intended for expert users.
To select a preset…
1. Press , select Picture and press  (right) to
enter the menu.
2. Select Advanced > Colour > Colour
temperature and press OK.
3. Select Normal, Warm or Cool. Or
select Custom if you want to customise a colour
temperature yourself.
32
4. Press  (left) repeatedly if necessary, to close the
menu.
Brightness
Custom colour temperature
With Brightness, you can set the level of brightness
of the picture signal. Brightness is a setting intended
for expert users. We recommend non-expert users to
adjust the brightness of the picture with
the Contrast setting.
With Custom colour temperature, you can set a
colour temperature yourself. To set a custom colour
temperature, first select Custom in the Colour
Temperature menu. Custom Colour Temperature is a
setting intended for expert users.
To adjust the level…
1. Press , select Picture and press  (right) to
enter the menu.
2. Select Advanced > Contrast > Brightness, and
press OK.
3. Press the arrows  (up) or  (down) to adjust
the value.
4. Press  (left) repeatedly if necessary, to close the
menu.
To set a custom colour temperature…
1. Press , select Picture and press  (right) to
enter the menu.
2. Select Advanced > Colour > Custom colour
temperature and press OK.
3. Press the arrows  (up) or  (down) to adjust
the value. WP is white point and BL is black
level. You can also select one of the presets in this
menu.
4. Press  (left) repeatedly if necessary, to close the
menu.
Video contrast
With Video Contrast, you can decrease the range of
the video contrast.
To adjust the level…
1. Press , select Picture and press  (right) to
enter the menu.
2. Select Advanced > Contrast > Video
contrast, and press OK.
3. Press the arrows  (up) or  (down) to adjust
the value.
4. Press  (left) repeatedly if necessary, to close the
menu.
Contrast settings
Contrast modes
With Contrast Mode, you can set the level at which
power consumption can be reduced by dimming the
intensity of the screen. Choose for the best power
consumption or for the picture with the best intensity.
To adjust the level…
1. Press , select Picture and press  (right) to
enter the menu.
2. Select Advanced > Contrast > Contrast
mode and press OK.
3. Select Standard, Best power, Best picture,
or Off.
4. Press  (left) repeatedly if necessary, to close the
menu.
Gamma
With Gamma, you can set a non-linear setting for
picture luminance and contrast. Gamma is a setting
intended for expert users.
To adjust the level…
1. Press , select Picture and press  (right) to
enter the menu.
2. Select Advanced > Contrast > Gamma, and
press OK.
3. Press the arrows  (up) or  (down) to adjust
the value.
4. Press  (left) repeatedly if necessary, to close the
menu.
Dynamic contrast
With Dynamic Contrast, you can set the level at
which the TV automatically enhances the details in
the dark, middle and light areas of the picture.
To adjust the level…
1. Press , select Picture and press  (right) to
enter the menu.
2. Select Advanced > Contrast > Dynamic
contrast and press OK.
3. Select Maximum, Medium, Minimum or Off.
4. Press  (left) repeatedly if necessary, to close the
menu.
Sharpness settings
Super resolution
With Super Resolution, you switch on a superior
sharpness in line edges and contours.
To switch on or off…
33
1. Press , select Picture and press  (right) to
enter the menu.
2. Select Advanced > Sharpness > Super
resolution, and press  (right) to enter the menu.
3. Select On or Off.
4. Press  (left) repeatedly if necessary, to close the
menu.
the Picture format menu.
2. Select a format from the list and press OK.
Screen edges
With Screen edges, you can slightly enlarge the
picture to hide distorted edges.
To adjust the edges ...
Noise reduction
1. Press , select Picture and press  (right) to
enter the menu.
2. Select Format and edges > Screen edges, and
press  (right) to enter the menu.
3. Press the arrows  (up) or  (down) to adjust
the value.
4. Press  (left) repeatedly if necessary, to close the
menu.
With Noise reduction, you can filter out and reduce
the level of image noise.
To adjust the noise reduction…
1. Press , select Picture and press  (right) to
enter the menu.
2. Select Advanced > Sharpness > Noise
reduction, and press  (right) to enter the menu.
3. Select Maximum, Medium, Minimum or Off.
4. Press  (left) repeatedly if necessary, to close the
menu.
13.3
Sound
Sound style
MPEG artefact reduction
With MPEG artefact reduction, you can smoothen
the digital transitions in the picture. MPEG artefacts
are mostly visible as small blocks or jagged edges in
images.
Select a style
To reduce the MPEG artefacts…
1. While watching a TV channel, press .
2. Select Sound and press  (right) to enter the
menu.
3. Select Sound style, and select one of the styles in
the list.
4. Press  (left) repeatedly if necessary, to close the
menu.
For easy sound adjustment, you can select a preset
setting with Sound Style.
1. Press , select Picture and press  (right) to
enter the menu.
2. Select Advanced > Sharpness > MPEG artefact
reduction, and press  (right) to enter the menu.
3. Select On or Off.
4. Press  (left) repeatedly if necessary, to close the
menu.
The available Sound styles are ...
- Personal - The sound preferences you set during
the first start up.
- Original - Most neutral sound setting
- Movie - Ideal for watching movies
- Music - Ideal for listening to music
- Game - Ideal for gaming
- News - IIdeal for speech
Format and edges
Picture format
If black bars appear on top and bottom or on both
sides of the picture, you can adjust the picture format
to a format that fills the screen.
To change the picture format ...
Restore a style
1. Press , select Picture and press  (right) to
enter the menu.
2. Select Format and edges > Picture format, and
press  (right) to enter the menu.
3. Select a format from the list and press OK.
4. Press  (left) repeatedly if necessary, to close the
menu.
With a Sound Style selected, you can adjust any
sound setting in Setup > Sound…
The selected style will store the changes you made.
We recommend to adjust the sound settings for the
style Personal only. The Sound Style - Personal can
save its settings for each individual connected device
in Sources menu.
To change the picture format while watching TV ...
To restore the style to its original setting…
1. While watching a TV channel, press  to open
34
1. While watching a TV channel, press .
2. Select Sound and press  (right) to enter the
menu.
3. Select Sound style , and select the Sound Style
you want to restore.
4. Press the colour key  Restore style. The style is
restored
5. Press  (left) repeatedly if necessary, to close the
menu.
Advanced sound settings
Auto volume levelling
With Auto volume levelling, you can set the TV to
automatically level out sudden volume differences.
Typically at the beginning of adverts or when you are
switching channels.
To switch on or off…
1. Press , select Sound and press  (right) to
enter the menu.
2. Select Advanced and press  (right) to enter the
menu.
3. Select Auto volume levelling and
press  (right) to enter the menu.
4. Select On or Off.
5. Press  (left) repeatedly if necessary, to close the
menu.
Sound settings
Bass
With Bass, you can adjust the level of low tones in
the sound.
To adjust the level…
1. Press , select Sound and press  (right) to
enter the menu.
2. Select Bass and press  (right).
3. Press the arrows  (up) or  (down) to adjust
the value.
4. Press  (left) repeatedly if necessary, to close the
menu.
TV speakers
You can send the TV sound to a connected audio
device - a Home Theatre System or audio system.
You can select where you want to hear the TV sound
and how you want to control it.
- If you select TV speakers > Off, you permanently
switch off the TV speakers.
- If you select TV speakers > On, the TV speakers
are always on.
Treble
With Treble, you can adjust the level of high tones in
the sound.
With an audio device connected with HDMI CEC, you
can use one of the EasyLink settings.
- If you select EasyLink, the TV sends the TV sound
to the audio device. The TV will switch off the TV
speakers when the device is playing the sound.
- If you select EasyLink autostart, the TV will switch
on the audio device, send the TV sound to the device
and switch off the TV speakers.
With EasyLink or EasyLink Autostart selected, you can
still switch to TV speakers if necessary.
To adjust the level…
1. Press , select Sound and press  (right) to
enter the menu.
2. Select Treble and press  (right).
3. Press the arrows  (up) or  (down) to adjust
the value.
4. Press  (left) repeatedly if necessary, to close the
menu.
To set the TV speakers…
Surround mode
1. Press , select Sound and press  (right) to
enter the menu.
2. Select Advanced and press  (right) to enter the
menu.
3. Select TV speakers and press  (right) to enter
the menu.
4. Select On, Off, EasyLink, or EasyLink autostart .
5. Press  (left) repeatedly if necessary, to close the
menu.
With Surround mode, you can set the sound effect of
the TV speakers.
To set the surround mode…
1. Press , select Sound and press  (right) to
enter the menu.
2. Select Surround mode and press  (right) to
enter the menu.
3. Select Stereo or Incredible surround.
4. Press  (left) repeatedly if necessary, to close the
menu.
To switch to speakers directly…
1. While watching TV, press .
2. Select Quick settings > Speakers and
select TV or Amplifier (audio system).
3. Press  (left) repeatedly if necessary, to close the
menu.
35
Clear sound
HDMI 1 - ARC
With Clear sound, you improve the sound for speech.
Ideal for news programmes. You can switch the
speech improvement on or off.
To switch on or off…
1. Press , select Sound and press  (right) to
enter the menu.
2. Select Advanced > HDMI 1 - ARC and press OK.
3. Select On or Off, then press OK.
4. Press  (left) repeatedly if necessary, to close the
menu.
To switch on or off…
1. Press , select Sound and press  (right) to
enter the menu.
2. Select Advanced > Clear sound and press OK.
3. Select On or Off, then press OK.
4. Press  (left) repeatedly if necessary, to close the
menu.
Audio out delay
With a Home Theatre System (HTS) connected to the
TV, the picture on TV and the sound from the HTS
should be synchronised.
Audio out format
If you have a Home Theatre System (HTS)
with multichannel sound processing capabilities like
Dolby Digital, DTS® or similar, set the Audio Out
Format to Multichannel. With Multichannel, the TV
can send the compressed multichannel sound signal
from a TV channel or connected player to the Home
Theatre System. If you have a Home Theatre System
without multichannel sound processing, select Stereo.
Automatic audio to video sync
With recent Philips Home Theatre Systems, the audio
to video sync is done automatically and always
correct.
Audio sync delay
For some Home Theatre Systems you might need to
adjust the audio sync delay to synchronise the audio
to the video. On the HTS, increase the delay value
until there is a match between picture and sound. A
delay value of 180ms may be required. Read the user
manual of the HTS. With a delay value set up on the
HTS, you need to switch off Audio Out Delay on the
TV.
To set Audio out format…
1. Press , select Sound and press  (right) to
enter the menu.
2. Select Advanced > Audio out format and
press OK.
3. Select Multichannel or Stereo, then press OK.
4. Press  (left) repeatedly if necessary, to close the
menu.
To switch off Audio Out Delay…
1. Press , select Sound and press  (right) to
enter the menu.
2. Select Advanced > Audio out delay and
press OK.
3. Select Off.
4. Press  (left) repeatedly if necessary, to close the
menu.
Audio out levelling
Use the Audio Out Levelling setting to level the
volume (loudness) of the TV and the Home Theatre
System when you switch over from one to another.
Volume differences can be caused by differences in
sound processing.
To level the difference in volume…
Audio out offset
1. Press , select Sound and press  (right) to
enter the menu.
2. Select Advanced > Audio out levelling and
press OK.
3. Select More, Medium, or Less, then press OK.
4. If the volume difference is large, select More. If the
volume difference is small, select Less.
5. Press  (left) repeatedly if necessary, to close the
menu.
If you cannot set a delay on the Home Theatre
System, you can set the TV to sync the sound. You
can set an offset that compensates for the time
necessary for the Home Theatre System to process
the sound of the TV picture. You can set the value in
steps of 5ms. Maximum setting is -60ms.
Audio Out Levelling affects both the Audio Out Optical and HDMI ARC sound signals.
1. Press , select Sound and press  (right) to
enter the menu.
2. Select Advanced > Audio out offset and
press OK.
3. Use the slider bar to set the sound offset and
press OK.
The Audio out delay setting should be switched on.
To synchronise the sound on the TV…
36
4. Press  (left) repeatedly if necessary, to close the
menu.
Screen off
If you only listen to music, you can switch off the TV
screen to save energy.
Headphone volume
To only switch off the TV screen…
With Headphones volume, you can set the volume of
a connected headphone separately.
1. Press , select Eco settings and
press  (right) to enter the menu.
2. Select Screen off.
3. Press  (left) repeatedly if necessary, to close the
menu.
To adjust the volume…
1. Press , select Sound and press  (right) to
enter the menu.
2. Select Headphones volume and press OK.
3. Press the arrows  (up) or  (down) to adjust
the value.
4. Press  (left) repeatedly if necessary, to close the
menu.
To switch the screen back on, press any key on the
remote control.
Switch off timer
If the TV receives a TV signal but you don't press a
key on the remote control during a 4 hour period, the
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal nor a remote
control command for 10 minutes, the TV switches off
automatically.
TV placement (For 4031, 4131 series
TV)
As part of the first installation, this setting is set to
either On a TV stand or On the wall. If you have
changed the placement of the TV since then, adjust
this setting accordingly for best sound reproduction.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
1. Press , select Sound and press  (right) to
enter the menu.
2. Select TV placement and press OK.
3. Select On a TV stand or On the wall.
4. Press  (left) repeatedly if necessary, to close the
menu.
To deactivate the Switch Off Timer …
1. Press , select Eco settings and press  (right)
to enter the menu.
2. Select Switch off timer and press OK.
3. Press the arrows  (up) or  (down) to adjust
the value. The value 0 deactivates the automatic
switch off.
4. Press  (left) repeatedly if necessary, to close the
menu.
13.4
Eco settings
Energy saving
13.5
Eco settings  bundles the settings that help the
environment.
General settings
Energy Saving
Languages
If you select Energy Saving, the TV switches to Picture
Style - Standard automatically, the most ideal energy
conscious setting for the picture.
Menu language
To change the language of the TV menus and
messages…
To set the TV in Energy Saving…
1 - Press , select Eco settings and
press  (right) to enter the menu.
2 - Select Energy saving, the Picture style is set to
Standard automatically.
3 - Press  (left) repeatedly if necessary, to close
the menu.
1. Press , select General
settings > Language > Menu language and
press OK.
2. Select on the language you need.
3. Press  (left) repeatedly if necessary, to close the
menu.
37
the menu.
3. Select Primary subtitle language or Secondary
subtitle language, and press OK.
4. Select the language you need and press OK.
5. Press  (left) repeatedly if necessary, to close the
menu.
Language preferences
Audio language
A digital broadcast can offer several audio languages
(spoken languages) for a programme. You can set a
preferred primary and secondary audio language. If
audio in one of these languages is available, the TV
will switch to the audio language.
To select a subtitle language when none of your
preferred languages are available…
1. Press  OPTIONS.
2. Select Subtitle language and select one of the
languages as subtitles temporarily.
To set the primary and secondary audio language…
1. Press , select General settings and
press  (right) to enter the menu.
2. Select Languages and press  (right) to enter
the menu.
3. Select Primary
audio language or Secondary audio language,
and press OK.
4. Select the language you need and press OK.
5. Press  (left) repeatedly if necessary, to close the
menu.
Subtitles from Text
Subtitles for analogue channels
For analogue channels, you need to make the
subtitles available for each channel manually.
1. Switch to a channel and press TEXT to open Text.
2. Enter the page number for subtitles, usually 888.
3. Press TEXT again, to close Text.
To select an audio language when none of your
preferred audio language is available…
If you select On in the Subtitle menu when watching
this analogue channel, subtitles will be shown if
available.
To know if a channel is analogue or digital, switch to
the channel and open Status in the Options menu.
1. Press  OPTIONS.
2. Select Audio language and select one of the
languages as audio temporarily.
Subtitles languages
Switch on
Text / Teletex languages
You can switch
subtitles Subtitle on or Subtitle off . Alternatively
you can select Automatic.
Text pages
Select a Text page
To select a page . . .
Automatic
1. Enter the page number with the number keys.
2. Use the arrow keys to navigate.
3. Press a colour key to select a colour-coded subject
at the bottom of the screen.
If language information is part of the digital broadcast
and the broadcasted programme is not in your
language (the language set on TV), the TV can show
subtitles automatically in one of your preferred
subtitle languages. One of these subtitle languages
must also be part of the broadcast.
Text sub-pages
A Text page number can hold several subpages. The
subpage numbers are shown on a bar next to the
main page number.
To select a subpage, press  or .
You can select your preferred subtitle languages
in Subtitle language.
T.O.P. Text pages
Subtitle language settings
Some broadcasters offer T.O.P. Text.
To open T.O.P. Text pages within Text,
press  OPTIONS and select T.O.P. overview.
A digital broadcast can offer several subtitle
languages for a programme. You can set a preferred
primary and secondary subtitle language. If subtitles
in one of these languages are available, the TV will
show the subtitles you selected.
Text options
To set the primary and secondary subtitle language…
In Text/Teletext, press  OPTIONS to select the
following…
1. Press , select General settings and
press  (right) to enter the menu.
2. Select Languages and press  (right) to enter
- Freeze page
38
To stop the automatic rotation of subpages.
Clock
- Dual screen / Full screen
To show the TV channel and Text alongside each
other.
Date and time
Automatic
- T.O.P. overview
To open T.O.P. Text.
In some countries, digital broadcasts do not send UTC
- Coordinated Universal Time information. The
daylight saving change might be ignored and the TV
might show an incorrect time.
- Enlarge
To enlarge the Text page for comfortable reading.
- Reveal
To unhide hidden information on a page.
When you record programmes - scheduled in the TV
Guide, we recommend not to change the time and
date manually. In some countries, for some network
operators, the Clock setting is hidden to avoid an
incorrect clock setting.
- Cycle subpages
To cycle subpages when these are available.
- Language
To switch the group of characters that Text uses to
display correctly.
To correct the TV clock automatically...
1. Press , select General settings > Clock > Auto
clock mode, and select Country dependent.
2. Select Daylight saving and select the appropriate
setting.
3. Press  (left) repeatedly if necessary, to close the
menu.
- Text 2.5
To activate the Text 2.5 for more colours and better
graphics.
Text setup
Text language
Manual
Some digital TV broadcasters have several Text
languages available.
To set your primary and secondary Text language . . .
To set the TV clock manually…
1. Press , select General
settings > Clock > Auto clock mode, and
select Manual.
2. Select Date and Time to adjust.
3. Press  (left) repeatedly if necessary, to close the
menu.
1. Press , select General settings and
press  (right) to enter the menu.
2. Select Languages and press  (right) to enter
the menu.
3. Select Primary teletext or Secondary teletext ,
and press OK.
4. Select the language you need and press OK.
5. Press  (left) repeatedly if necessary, to close the
menu.
Time zone
To set the time zone…
Text 2.5
If available, Text 2.5 offers more colours and better
graphics. Text 2.5 is activated as a standard factory
setting.
To switch off Text 2.5…
1. Press , select General
settings > Clock > Time zone, and press OK.
2. Select one of the time zones.
3. Press  (left) repeatedly if necessary, to close the
menu.
1. Press TEXT.
2. With Text/Teletext open on screen,
press  OPTIONS.
3. Select Text 2.5 > Off.
4. Press  (left) repeatedly if necessary, to close the
menu.
Sleep timer
With the Sleep timer, you can set the TV to switch to
Standby automatically after a preset time.
To set the Sleep timer…
1. Press , select General settings > Sleep
timer and press OK.
2. With the slider bar you can set the time to up to 180
minutes in increments of 5 minutes. If set to 0
minutes, the Sleep Timer is switched off. You can
always switch off your TV earlier or reset the time
39
during the countdown.
3. Press  (left) repeatedly if necessary, to close the
menu.
Location
If the TV is installed in a shop, you can set the TV to
display an in store promotion banner. Picture
style is set to Vivid automatically. Switch off
timer is switched off.
Switch off timer
If the TV receives a TV signal but you don't press a
key on the remote control during a 4 hour period, the
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal nor a remote
control command for 10 minutes, the TV switches off
automatically.
To set the TV to Shop location…
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
If you use the TV at home, set the TV in Home
location.
To deactivate the Switch Off Timer …
Shop setup
1. Press , select General settings and
press  (right) to enter the menu.
2. Select Location >
Shop, and press OK.
3. Press  (left) repeatedly if necessary, to close the
menu.
1. Press , select Eco settings and press  (right)
to enter the menu.
2. Select Switch off timer and press OK.
3. Press the arrows  (up) or  (down) to adjust
the value. The value 0 deactivates the automatic
switch off.
4. Press  (left) repeatedly if necessary, to close the
menu.
If the TV is set to Shop, you can set the availablility of
a specific demo for in store use.
1. Press , select General settings and
press  (right) to enter the menu.
2. Select Commercial banner and press  (right) to
enter the menu.
3. Select On or Off.
4. Press  (left) repeatedly if necessary, to close the
menu.
EasyLink
EasyLink
Factory settings
To switch off EasyLink completely…
You can set the TV back to the original TV settings
(the factory settings).
1. Press , select General settings and
press  (right) to enter the menu.
2. Select EasyLink, press  (right) and
select EasyLink one step further.
3. Select Off.
4. Press  (left) repeatedly if necessary, to close the
menu.
To switch back to the original settings…
1. Press , select General settings and
press  (right) to enter the menu.
2. Select Factory settings and press OK.
3. Press  (left) repeatedly if necessary, to close the
menu.
Reinstall TV
EasyLink remote control
You can redo a full TV installation. The TV is
completely reinstalled.
To switch off EasyLink remote control…
1. Press , select General settings and
press  (right) to enter the menu.
2. Select EasyLink > Easylink remote control, and
press OK.
3. Select Off.
4. Press  (left) repeatedly if necessary, to close the
menu.
To redo a full TV installation…
1. Press , select General settings and
select Reinstall TV.
2. Follow the instructions on screen. The installation
may take a few minutes.
40
13.7
Channel list copy
Universal access
For more information, in Help, see chapter Channel
installation > Channel list copy.
Switch on
With Universal access switched on, the TV is
prepared for use for the deaf, hard of hearing, blind or
partially sighted people.
13.6
Child lock
Switch on
Parental rating
If you did not switch on Universal access during the
installation, you can still switch it on in Universal
access menu.
To switch on Accessibility…
To set a minumum age to watch rated programmes...
1. Press , select Child lock and press  (right) to
enter the menu.
2. Select Parental rating, and select one of the age
in the list.
3. Press  (left) repeatedly if necessary, to close the
menu.
1. Press , select Universal access and
press  (right) to enter the menu.
2. Select Universal access one step further.
3. Select On and press OK.
4. Press  (left) repeatedly if necessary, to close the
menu.
With Universal access switched on, the
option Universal access is added in the Options
menu.
Set code / Change code
The Child Lock PIN code is used to lock or unlock
channels or programmes.
Hard of hearing
To set the lock code or to change the current code…
1. Press , select Child Lock and press  (right) to
enter the menu.
2. Select Set code or Change code and press OK.
3. Enter a 4 digit code of your choice. If a code is set
already, enter the current Child Lock code and then
enter the new code twice.
4. Press  (left) repeatedly if necessary, to close the
menu.
Some digital TV channels broadcast special audio and
subtitles adapted for the hard of hearing or deaf
people. With Hearing impaired switched on, the TV
automatically switches to the adapted audio and
subtitles, if available. Before you can switch
on Hearing impaired, you have to switch
on Universal access.
The new code is set.
1. Press , select Universal access and
press  (right) to enter the menu.
2. Select Hearing impaired and press  (right) to
enter the menu.
3. Select On and press OK.
4. Press  (left) repeatedly if necessary, to close the
menu.
To switch on Hearing impaired…
Forgotten your Child Lock PIN code?
If you forgot your PIN code, you can override the
current code and enter a new code.
1. Press , select Child lock and press  (right) to
enter the menu.
2. Select Change code and press OK.
3. Enter the overriding code 8888.
4. Now enter a new Child Lock PIN code and enter it
again to confirm.
5. Press  (left) repeatedly if necessary, to close the
menu.
Audio description
Switch on
Digital TV channels can broadcast special audio
commentary describing what is happening on
screen.
To be able to set the visually impaired audio and
effects, you have to switch on Audio
description first.
Also, before you can switch on Audio description, you
have to switch on Universal access in setup menu.
The new code is set.
41
With Audio Description, a narrator's commentary is
added to the normal audio.
To switch on the commentary (if available)…
menu.
To switch on Audio Description…
Speech
1. Press , select Universal access and
press  (right) to enter the menu.
2. Select Audio description and press  (right) to
enter the menu.
3. Select Audio description one step further
4. Select On and press OK.
5. Press  (left) repeatedly if necessary, to close the
menu.
The audio commentary can also hold subtitles for the
words which are spoken.
To switch on these subtitles (if available) . . .
1. Press , select Universal access and
press  (right) to enter the menu.
2. Select Audio description > Speech and press
OK.
3. Select Descriptive or Subtitles and press OK.
4. Press  (left) repeatedly if necessary, to close the
menu.
Speakers/Headphones
With Speakers/Headphones, you can select where
you want to hear the audio commentary.
On the TV speakers only, on the headphones only or
on both.
To set Speakers/Headphones…
1. Press , select Universal access and
press  (right) to enter the menu.
2. Select Audio
Description > Speakers/Headphones and press OK.
3. Select Speakers, Headphones or Speakers +
Headphones and press OK.
4. Press  (left) repeatedly if necessary, to close the
menu.
Mixed volume
You can mix the volume of the normal audio with the
audio commentary.
To mix the volume…
1. Press , select Universal access and
press  (right) to enter the menu.
2. Select Audio Description > Mixed volume and
press OK.
3. Press the arrows  (up) or  (down) to adjust
the value.
4. Press  (left) repeatedly if necessary, to close the
menu.
Audio effects
Some audio commentary can hold extra audio
effects, like stereo or fading sound.
To switch on Audio effects (if available)…
1. Press , select Universal access and
press  (right) to enter the menu.
2. Select Audio description > Audio effects and
press OK.
3. Press  (left) repeatedly if necessary, to close the
42
4. Select Update channels and press OK.
5. Press  BACK to close the menu.
14
Channel installation
14.1
Reinstall channels
Antenna/cable installation
Reinstall all channels
Update channels
You can reinstall all channels and leave all other TV
settings untouched.
Automatic channel update
If a PIN code is set, you will need to enter this code
before you can reinstall channels.
If you receive digital channels, you can set the TV to
automatically update the list with new channels.
Alternatively, you can start a channel update yourself.
To reinstall channels…
1. Press , select Antenna/cable installation and
press OK.
2. Enter your PIN code if necessary.
3. Select Search for channels and press OK.
4. Select Re-install channels, and press OK.
5. Select the country where you are now and
press OK.
6. Select Antenna (DVB-T) or Cable (DVB-C) , and
select one item you need to re-install.
7. Select Start and press OK to update channels.
This can take a few minutes.
8. Press  BACK to close the menu.
Automatic channel update
Once a day, at 6 AM, the TV updates the channels
and stores new channels. New channels are stored in
the All channels list but also in the New channels list.
Empty channels are removed.
If new channels are found or if channels are updated
or removed, a message is shown at TV start up. The
TV must be in standby to automatically update
channels.
To switch off the message at start up . . .
1. Press , select Antenna/cable installation and
press OK.
2. Enter your PIN code if necessary.
3. Select Automatic channel update and press OK.
4. Select Off and press OK.
5. Press  BACK to close the menu.
Reinstall TV
You can redo a full TV installation. The TV is
completely reinstalled.
To redo a full TV installation…
When new channels are found or if channels are
updated or removed, a message is shown at TV start
up. To avoid this message to appear after every
channel update, you can switch it off.
1 - Press , select General Settings > Reinstall
TV and press OK.
2 - Enter your PIN code if necessary.
3 - Select Yes and press OK to confirm.
4 - The TV will reinstall completely. All settings will
be reset and installed channels will be replaced. The
installation can take a few minutes.
5 - Press  BACK to close the menu.
To switch off the message…
1. Press , select Antenna/cable installation and
press OK.
2. Enter your PIN code if necessary.
3. Select Channel update message and press OK.
4. Select Off and press OK.
5. Press  BACK to close the menu.
DVB-T or DVB-C
In certain countries, the Automatic channel update is
done while watching TV or on any moment when the
TV is in standby.
DVB-T or DVB-C reception
During the channel installation, just before you search
for channels, you selected Antenna (DVB-T) or Cable
(DVB-C). Antenna DVB-T searches for terrestrial
analogue channels and digital DVB-T/T2 channels.
Cable DVB-C searches for analogue and digital
channels available from a cable DVB-C operator.
Manual channel update
You can always start an channel update yourself.
To start a channel update manually…
DVB-C Channel Installation
1. Press , select Antenna/cable installation and
press OK.
2. Enter your PIN code if necessary.
3. Select Search for channels and press OK.
For ease of use, all DVB-C settings are set to
automatic.
If your DVB-C operator gave you specific DVB-C
43
values, the network ID or network frequency, enter
these values when the TV asks for them during
installation.
search for channels, select Manual.
Channel Number Conflicts
Network frequency
In some countries, different TV channels
(broadcasters) might have the same channel number.
While installing, the TV shows the list with channel
number conflicts. You need to select which TV
channel you want to install on a channel number with
multiple TV channels.
With the Network frequency mode set to Manual,
you can enter the network frequency value received
from your cable provider here. To enter the value,
use the number keys.
Frequency step size
The TV searches for channels in steps of 8MHz.
DVB settings
If this results in having no channels installed or if
some channels are missing, you can search in smaller
steps of 1MHz. Using the 1MHz steps will take more
time to search for and install channels.
Access DVB settings
To access DVB settings...
1. Press , select Antenna/cable installation and
press OK.
2. Enter your PIN code if necessary.
3. Select Search for channels and press OK.
4. Select Re-install channels, and press OK.
5. Select the country where you are now and
press OK.
6. Select Cable (DVB-C).
7. Select Digital and analogue channels, Only digital
channels, or Only analogue channels, and press OK.
(Items will be differenct depends on the country you
select)
8. Select Start to search channels, or select Settings
for DVB-C settings.
9. After setting, select Done to save the settings.
10. Press  BACK to close the menu.
Symbol rate mode
If your cable provider did not give you a
specific symbol rate value to install the TV channels,
leave the Symbol rate mode setting on Automatic.
If you received a specific symbol rate value,
select Manual.
With the Symbol rate mode set to Manual, you can
enter the symbol rate value by using the number
keys.
Network ID
You can enter the network ID value by using the
number keys.
Frequency scan
Select the method of searching for channels. You can
select the faster Quick method and use the
predefined settings used by most cable providers in
your country.
Digital channels
If you know your cable operator is not offering digital
channels, you can skip searching for digital channels.
If this results in having no channels installed or if
some channels are missing, you can select the
extended Full method. This method will take more
time to search for and install channels.
Analogue channels
If you know your cable operator is not offering
analogue channels, you can skip searching for
analogue channels.
If you received a specific network frequency value to
search for channels, select Advanced.
Network frequency mode
Free / Scrambled
If you intend to use the fast Quick method
in Frequency scan to search for channels,
select Automatic. The TV will use 1 of the predefined
network frequencies (or HC - homing channel) as
used by most cable providers in your country.
If you have a subscription and a CAM - Conditional
Access Module for pay TV services, select Free +
scrambled. If you did not subscribe to pay TV
channels or services, you can select Free
channels only .
If you received a specific network frequency value to
44
To fine tune a channel, select Fine tune and
press OK. You can fine tune the channel
with  or .
If you want to store the channel found,
select Done and press OK.
Reception quality
You can check the quality and signal strength of a
digital channel. If you have your own antenna, you
can reposition the antenna to try and improve the
reception.
To check the reception quality of a digital channel…
- Store
You can store the channel on the current channel
number or as a new channel number.
Select Store current channel or Store as new
channel and press OK. The new channel number is
shown briefly.
1. Tune to the channel.
2. Press , select Antenna/cable Installation and
press OK. Enter your PIN code if necessary.
3. Select Digital: Reception test and press OK.
The digital frequency is shown for this channel. If the
reception is poor, you can reposition your antenna.
To check the signal quality of this frequency again,
select Search and press OK.
To enter a specific digital frequency yourself, use the
remote control digit keys. Alternatively, select the
frequency, position the arrows on a number
with  and  and change the number
with  and . To check the frequency,
select Search and press OK.
You can redo these steps until you have found all
available analogue TV channels.
14.2
Channel list copy
Introduction
If you use DVB-C to receive channels, the
option Symbol rate mode is available. For Symbol
rate mode, select Automatic, unless your cable
provider gave you a specific symbol rate value. To
enter the symbol rate value, use the number keys.
Channel List Copy is intended for dealers and expert
users.
With Channel List Copy, you can copy the channels
installed on one TV onto another Philips TV of the
same range. With Channel List Copy, you avoid the
time-consuming channel search by uploading a
predefined channel list on a TV. Use a USB flash drive
of minimum 1 GB.
Manual installation
Analogue TV channels can be manually installed,
channel by channel.
Conditions
- Both TVs are from the same year range.
- Both TVs have the same hardware type. Check the
hardware type on the TV type plate on the back of
the TV. Typically noted as Q . . . LA
- Both TVs have compatible software versions.
To install analogue channels manually…
1. Press , select Antenna/cable Installation and
press OK. Enter your PIN code if necessary.
2. Select Analogue: Manual Installation and
press OK.
Current software version
- System
To set up the TV system, select System.
Select your country or the part of the world where
you are now and press OK.
To check the cuurent version of the TV software…
1. Press , select Update Software and
press  (right) to enter the menu.
2. Select Current software info and press OK.
3. The version, release notes and creation date are
shown. Also, the Netflix ESN Number is shown if
available.
4. Press  (left) repeatedly if necessary, to close the
menu.
- Search Channel
To find a channel, select Search Channel and
press OK. You can enter a frequency yourself to find
a channel or let the TV search for a channel.
Press  (right) to select Search and press OK to
search for a channel automatically. The found
channel is shown on screen and if the reception is
poor, press Search again. If you want to store the
channel, select Done and press OK.
- Fine tune
45
To an already installed TV
Copy a channel list
1. Verify the country setting of the TV. (To verify this
setting, see chapter Reinstall All Channels. Start this
procedure until you reach the country setting.
Press  BACK to cancel the installation.)
If the country is correct continue with step 2.
If the country is not correct, you need to start a
reinstallation. See chapter Reinstall All Channels and
start the installation. Select the correct country and
skip the channels search. Finish the installation. When
done, continue with step 2.
2. Plug in the USB flash drive that holds the channel
list of the other TV.
3. To start the channel list upload, press ,
select General settings and press OK.
4. Select Channel List Copy > Copy to TV and
press OK. Enter your PIN code if necessary.
5. The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB flash drive.
To copy a channel list…
1. Switch on the TV. This TV should have channels
installed.
2. Plug in a USB flash drive.
3. Press , select General settings > Channel list
copy and press OK.
4. Select Copy to USB and press OK. You might be
asked to enter the Child Lock PIN code to copy the
channel list.
5. When copying is done, unplug the USB flash drive.
6. Press  (left) repeatedly if necessary, to close the
menu.
Now you can upload the copied channel list onto
another Philips TV.
Channel list version
Check the current version of the channel list...
1. Press , select General settings > Channel list
copy and press OK.
2. Select Channel List Copy and select Current
version, then press OK.
3. Press  (left) repeatedly if necessary, to close the
menu.
Upload a channel list
To not installed TVs
Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.
To a TV that is not yet installed
1. Plug in the power plug to start the installation and
select language and country. You can skip the
channel search. Finish the installation.
2. Plug in the USB flash drive that holds the channel
list of the other TV.
3. To start the channel list upload, press ,
select General settings and press OK.
4. Select Channel List Copy > Copy to TV and
press OK. Enter your PIN code if necessary.
5. The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB flash drive.
To installed TVs
Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.
46
15
About open source license
Software
Acknowledgements and License Texts for any open
source software used in this Philips TV.
15.1
This is a document describing the distribution of the
source code used on the Philips TV, which fall either
under the GNU General Public License (the GPL), or
the GNU Lesser General Public License (the LGPL), or
any other open source license. Instructions to obtain
source code for this software can be found in the user
manual.
Software version
To view the current TV software version…
1 - Press , select Update software > Current
software Info and press OK.
2 - The version, Release Version is shown.
3 - Press  (left) repeatedly if necessary, to close
the menu.
PHILIPS MAKES NO WARRANTIES WHATSOEVER,
EITHER EXPRESS OR IMPLIED, INCLUDING ANY
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, REGARDING THIS
SOFTWARE. Philips offers no support for this
software. The preceding does not affect your
warranties and statutory rights regarding any Philips
product(s) you purchased. It only applies to this
source code made available to you.
15.2
Local updates
For dealers and expert users…
1 - Press , select Update Software > Local
updates and press OK.
2 - Follow the on-screen instruction.
3 - Press  (left) repeatedly if necessary, to close
the menu.
Open source license information
libsqlite3 (3.7.14)
15.3
SQLite is a C library that implements an SQL database
engine.
Programs that link with the SQLite library can have
SQL database access without running a separate
RDBMS process.
Open source software
This television contains open source software. TP
Vision Europe B.V. hereby offers to deliver, upon
request, a copy of the complete corresponding
source code for the copyrighted open source
software packages used in this product for which such
offer is requested by the respective licences.
Source: http://linuxappfinder.com/package/libsqlite
3-0
This offer is valid up to three years after product
purchase to anyone in receipt of this information.
To obtain the source code, please write in English to .
..
libpng
Intellectual Property Dept.
TP Vision Europe B.V.
Prins Bernhardplein 200
1097 JB Amsterdam
The Netherlands
Source: www.libpng.org
libpng is the official PNG reference library. It supports
almost all PNG features.
OpenSSL (1.0.0.d)
The OpenSSL Project is a collaborative effort to
develop a robust, commercial-grade, full-featured,
and Open Source toolkit implementing the Secure
Sockets Layer (SSL v2/v3) and Transport Layer
Security (TLS v1) protocols as well as a full-strength
general purpose cryptography library. The project is
managed by a worldwide community of volunteers
that use the Internet to communicate, plan, and
develop the OpenSSL toolkit and its related
documentation.
15.4
Open source license
Source: www.openssl.org
47
libboost (1.51)
MTD utility (1.5.0)
Boost provides free peer-reviewed portable C++
source libraries, and emphasize libraries that work
well with the C++ Standard Library.
MTD subsystem (stands for Memory Technology
Devices) provides an abstraction layer for raw flash
devices. It makes it possible to use the same API
when working with different flash types and
technologies, e.g. NAND, OneNAND, NOR, AG-AND,
ECC'd NOR, etc.
Boost libraries are intended to be widely useful, and
usable across a broad spectrum of applications.
The Boost license encourages both commercial and
non-commercial use.
libjpeg (6b)
MTD subsystem does not deal with block devices like
MMC, eMMC, SD, CompactFlash, etc. These devices
are not raw flashes but they have a Flash Translation
layer inside, which makes them look like block
devices. These devices are the subject of the Linux
block subsystem, not MTD.
Libjpeg is a widely used C library for reading and
writing JPEG image files.
Source: http://www.linuxmtd.infradead.org/source.html
Source: www.boost.org
Source: http://libjpeg.sourceforge.net/
libscew
zlib (1.2.7)
The aim of SCEW is to provide an easy interface
around the XML Expat parser, as well as a simple
interface for creating new XML documents. It provides
functions to load and access XML elements without
the need to create Expat event handling routines
every time you want to load a new XML document.
A massively spiffy yet delicately unobtrusive
compression library
Source: www.zlib.net
SCEW is freely available for download under the
terms of the GNU Lesser General Public License v2.1
(LGPL).
libdirectfb (1.4.11)
DirectFB is a thin library that provides hardware
graphics acceleration, input device handling and
abstraction, integrated windowing system with
support for translucent windows and multiple display
layers, not only on top of the Linux Framebuffer
Device.
Source: http://www.nongnu.org/scew/
libexpat
Expat is an XML parser library written in C.
It is a complete hardware abstraction layer with
software fallbacks for every graphics operation that is
not supported by the underlying hardware. DirectFB
adds graphical power to embedded systems and sets
a new standard for graphics under Linux.
It is a stream-oriented parser in which an application
registers handlers for things the parser might find in
the XML document (like start tags).
Source: http://expat.sourceforge.net/
Source: http://directfb.org/
libdrm
libTomMath (0.42.0)
libdrm provides core library routines for the X Window
System to directly interface with video hardware
using the Linux kernel's Direct Rendering Manager
(DRM).
LibTom Projects are open source libraries written in
portable C under WTFPL. The libraries supports a
variety of cryptographic and algebraic primitives
designed to enable developers and students to
pursue the field of cryptography much more
efficiently.
Source: http://dri.freedesktop.org/libdrm/
Source: http://libtom.org/
FFMpeg (0.6)
A complete, cross-platform solution to record,
convert and stream audio and video.
Source: www.ffmpeg.org
48
16
Specifications
16.1
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Environmental
Please act according to your local rules and do not
dispose of your old products with your normal
household waste. Correct disposal of your old
product helps to prevent potential negative
consequences for the environment and human
health.
European Energy Label
The European Energy Label informs you on the
energy efficiency class of this product. The greener
the energy efficiency class of this product is, the
lower the energy it consumes.
On the label, you can find the energy efficiency class,
the average power consumption of this product in use
and the average energy consumption for 1 year. You
can also find the power consumption values for this
product on the Philips website for your country
at www.philips.com/TV
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot be
disposed with normal household waste.
Please find out for yourself about the local rules on
separate collection of batteries because correct
disposal will help to prevent negative consequences
for the environment and human health.
Product Fiche
5231 series TV
24PFx5231
16.2
- Energy Efficiency Class : A
- Visible Screen Size : 60 cm / 24 inch
- On Mode Power Consumption (W) : 23 W
- Annual Energy Consumption (kWh) * : 34 kWh
- Standby Power Consumption (W) **: 0.30 W
- Display Resolution (Pixels) : 1920x1080p
Power
Product specifications are subject to change without
notice. For more specification details of this product,
see www.philips.com/support
* Energy consumption kWh per year, based on the
power consumption of the television operating 4
hours per day for 365 days. The actual energy
consumption depends on how the television is used.
Power
- Mains power : AC 220-240V +/-10%
- Ambient temperature : 5°C to 35°C
- Power saving features : Eco mode, Picture mute (for
radio), Auto switch-off timer, Eco settings menu.
** When the TV is turned off with the remote control
and no function is active.
For power consumption information, see
chapter Product Fiche.
End of use
The power rating stated on the product typeplate is
the power consumption for this product during
normal household use (IEC 62087 Ed.2). The
maximum power rating, stated between brackets, is
used for electrical safety (IEC 60065 Ed. 8.0).
Disposal of your old product and batteries
Your product is designed and manufactured with high
quality materials and components, which can be
recycled and reused.
16.3
Reception
When this crossed-out wheeled bin symbol is
attached to a product it means that the product is
covered by the European Directive 2012/19/EU.
49
For PxT series TV
For PFx series TV
- Aerial input : 75 ohm coaxial (IEC75)
- Tuner bands : Hyperband, S-Channel, UHF, VHF
- DVB : DVB-T2, DVB-C (cable) QAM
- Analogue video playback : SECAM, PAL
- Digital video playback : MPEG2 SD/HD (ISO/IEC
13818-2), MPEG4 SD/HD (ISO/IEC 14496-10)
- Digital audio playback (ISO/IEC 13818-3)
Video formats
Resolution — Refresh rate
16.4
- 480i - 60 Hz
- 480p - 60 Hz
- 576i - 50 Hz
- 576p - 50 Hz
- 720p - 50 Hz, 60 Hz
- 1080i - 50 Hz, 60 Hz
- 1080p - 24 Hz, 25 Hz, 30 Hz
Display type
Computer formats
Resolutions (amongst others)
5231 series TV
- 640 x 480p - 60 Hz
- 800 x 600p - 60 Hz
- 1024 x 768p - 60 Hz
- 1280 x 768p - 60 Hz
- 1360 x 765p - 60 Hz
- 1360 x 768p - 60 Hz
- 1280 x 1024p - 60 Hz
- 1920 x 1080p - 60 Hz
Diagonal screen size
- 24PFx5231: 60 cm / 24 inch
Display resolution
- 1920x1080p
16.5
16.6
Display input resolution
Dimensions and Weights
For PHx series TV
5231 series TV
Video formats
Resolution — Refresh rate
24PFx5231
- 480i - 60 Hz
- 480p - 60 Hz
- 576i - 50 Hz
- 576p - 50 Hz
- 720p - 50 Hz, 60 Hz
- 1080i - 50 Hz, 60 Hz
- 1080p - 24 Hz, 25 Hz, 30 Hz
Width 547.9 mm - Height 410.05 mm - Depth 129.1
mm - Weight ± 4.35 kg
Computer formats
5231/05 series TV
Resolutions (amongst others)
TV Rear
- 640 x 480p - 60 Hz
- 800 x 600p - 60 Hz
- 1024 x 768p - 60 Hz
- 1280 x 768p - 60 Hz
- 1360 x 765p - 60 Hz
- 1360 x 768p - 60 Hz
- HDMI 1 ARC: HDMI Audio Return Channel
- HDMI 2
- Network LAN - RJ45 (for Freeview HD)
- SERV. U: Service port
- VGA: PC input
- SCART (RGB/CVBS): SCART adaptor
- AUDIO IN (DVI/VGA/AUX): Stereo 3.5mm mini-jack
- DIGITAL AUDIO OUT: SPDIF
- TV ANTENNA: 75 ohm coaxial (IEC)
16.7
Connectivity
TV Side
- CI: Common Interface
- USB
- Headphones: Stereo 3.5mm mini-jack
50
16.8
Sound
5231 series TV
- HD Stereo
- Output power (RMS) : 16W
- Dolby® Digital Plus
- DTS 2.0+ Digital out ™
16.9
Multimedia
Supported multimedia connections
- USB (FAT / FAT 32 / NTFS): only connect USB
devices that consume 500 mA of power or less.
Supported image files
- JPEG, GIF, PNG, BMP
Supported audio files
- MP3, WAV, AAC, WMA (v2 up to v9.2)
Supported video files
- AVI, MKV, H.264/MPEG-4 AVC, MPEG1, MPEG2,
MPEG4, WMV9/VC1, HEVC
Supported subtitle format
- SRT, SMI, SSA, SUB, ASS, TXT
51
The TV needs to be checked.
If you do not notice the flickering, the remote control
might be broken or its batteries are low.
This method of checking the remote control is not
possible with remote controls which are wirelessly
paired with the TV.
17
Help and support
17.1
Register your TV
The TV goes back to standby after showing the
Philips startup screen
Register your TV and enjoy a range of benefits
including full support (including downloads),
privileged access to information about new products,
exclusive offers and discounts, the chance to win
prizes and even participate in special surveys about
new releases.
When the TV is in standby, a Philips startup screen is
displayed, then the TV returns to standby mode. This
is normal behaviour. When the TV is disconnected
and reconnected to the power supply, the startup
screen is displayed at the next startup. To switch on
the TV from standby, press on the remote control or
the TV.
Go to www.philips.com/welcome
The standby light keeps on blinking
17.2
Disconnect the power cable from the power outlet.
Wait 5 minutes before you reconnect the power
cable. If the blinking reoccurs, contact Philips TV
Consumer Care.
Using help
This TV offers help on screen.
Open Help
1. Press  to open the Home menu.
2. Select Utilities > Help and press OK.
Channels
UMv_T_v23_20170316
No digital channels found during the installation
17.3
See the technical specifications to make sure that
your TV supports DVB-T or DVB-C in your country.
Make sure that all cables are properly connected and
that the correct network is selected.
Troubleshooting
Previously installed channels are not in the channel
Switch on and remote control
list
The TV does not switch on
Make sure that the correct channel list is selected.
- Disconnect the power cable from the power outlet.
Wait for one minute then reconnect it.
- Make sure that the power cable is securely
connected.
Picture
No picture / distorted picture
Creaking sound at startup or switch off
When you are turning the TV on, off or to standby,
you hear a creaking sound from the TV chassis. The
creaking sound is due to the normal expansion and
contraction of the TV as it cools and warms up. This
does not affect performance.
- Make sure that the antenna is properly connected
to the TV.
- Make sure that the correct device is selected as the
display source.
- Make sure that the external device or source is
properly connected.
TV does not respond to the remote control
Sound but no picture
The TV requires some time to start up. During this
time, the TV does not respond to the remote control
or TV controls. This is normal behaviour.
If the TV continues to be unresponsive to the remote
control, you can check if the remote control is working
by means of a mobile phone camera. Put the phone
in camera mode and point the remote control to the
camera lens. If you press any key on the remote
control and you notice the infra red LED flicker
through the camera, the remote control is working.
- Make sure that the picture settings are set correctly.
Poor antenna reception
- Make sure that the antenna is properly connected
to the TV.
- Loud speakers, unearthed audio devices, neon
lights, high buildings and other large objects can
influence reception quality. If possible, try to improve
the reception quality by changing the antenna
52
direction or moving devices away from the TV.
- If reception on only one channel is poor, fine-tune
this channel with Manual Installation.
Connections
HDMI
Poor picture from a device
Picture does not fit the screen
- Note that HDCP (High-bandwidth Digital Content
Protection) support can delay the time taken for a TV
to display content from an HDMI device.
- If the TV does not recognise the HDMI device and
no picture is displayed, switch the source from one
device to another and back again.
- If there are intermittent sound disruptions, make
sure that output settings from the HDMI device are
correct.
- If you use an HDMI-to-DVI adapter or HDMI-toDVI cable, make sure that an additional audio cable is
connected to AUDIO IN (mini-jack only), if available.
- Change to a different picture format.
EasyLink does not work
Picture format keeps changing with different
- Select a non 'Auto' picture format.
- Make sure that your HDMI devices are HDMI-CEC
compatible. EasyLink features only work with devices
that are HDMI-CEC compatible.
Picture position is incorrect
No volume icon shown
- Picture signals from some devices may not fit the
screen correctly. Check the signal output of the
connected device.
- When a HDMI-CEC audio device is connected this
behaviour is normal.
Computer picture is not stable
show
- Make sure that your PC uses the supported
resolution and refresh rate.
- Make sure that the USB storage device is set to
Mass Storage Class compliant, as described in the
storage device's documentation.
- Make sure that the USB storage device is
compatible with the TV.
- Make sure that the audio and picture file formats
are supported by the TV.
- Make sure that the device is connected properly.
- Make sure that the picture settings are set correctly.
Picture settings change after a while
- Make sure that Location is set to Home . You can
change and save settings in this mode.
A commercial banner appears
- Make sure that Location is set to
Home.
channels
Photos, videos and music from a USB device do not
Sound
No sound or poor sound quality
Choppy playback of USB files
If no audio signal is detected, the TV automatically
switches the audio output off — this does not indicate
malfunction.
- The transfer performance of the USB storage
device may limit the data transfer rate to the TV which
causes poor playback.
- Make sure that the sound settings are correctly set.
- Make sure that all cables are properly connected.
- Make sure that the volume is not muted or set to
zero.
- Make sure that the TV audio output is connected to
the audio input on the Home Theatre System.
- Sound should be heard from the HTS speakers.
- Some devices may require you to manually enable
HDMI audio output. If HDMI audio is already enabled,
but you still do not hear audio, try changing the digital
audio format of the device to PCM (Pulse Code
Modulation). Refer to the documentation
accompanying your device for instructions.
17.4
Online help
To solve any Philips TV related problem, you can
consult our online support. You can select your
language and enter your product model number.
Go to www.philips.com/support.
On the support site you can find your country's
telephone number to contact us as well as answers to
frequently asked questions (FAQs). In some countries,
you can chat with one of our collaborators and ask
your question directly or send a question by email.
You can download new TV software or the manual to
read on your computer.
53
17.5
Consumer care / Repair
For support and repair, call the Consumer Care
hotline in your country. Find the telephone number in
the printed documentation that came with the TV.
Or consult our website www.philips.com/support .
TV model number and serial number
You might be asked to provide the TV product model
number and serial number. Find these numbers on
the packaging label or on the type label on the back
or bottom of the TV.
 Warning
Do not attemp to repair the TV yourself. This may
cause severe injury, irrepairable damage to your TV
or void your warranty.
54
18
Risk of injury or damage to the TV
Safety and care
- Two people are required to lift and carry a TV that
weighs more than 25 kg or 55 lbs.
18.1
- If you mount the TV on a stand, only use the
supplied stand. Secure the stand to the TV tightly.
Place the TV on a flat, level surface that can support
the weight of the TV and the stand.
Safety
Important
- When wall mounted, ensure that the wall mount can
safely bear the weight of the TV set. TP Vision bears
no responsibility for improper wall mounting that
results in accident, injury or damage.
Read and understand all safety instructions before
you use the TV. If damage is caused by failure to
follow instructions, the warranty does not apply.
- Parts of this product are made of glass. Handle with
care to avoid injury or damage.
Secure the TV from falling over
Risk of damage to the TV !
Always use the supplied wall bracket to secure the TV
from falling over. Mount the bracket and secure the
TV onto the bracket, even if you put the TV on the
floor.
Before you connect the TV to the power outlet,
ensure that the power voltage matches the value
printed on the back of the TV. Never connect the TV
to the power outlet if the voltage is different.
You can find the mounting instructions in the Quick
Start Guide that came with the TV. In case you lost
this guide, you can download the guide
from www.philips.com
Use the product type number of the TV to look for the
Quick Start Guide to download.
Risk of injury to children
Follow these precautions to prevent the TV from
toppling over and causing injury to children:
- Never place the TV on a surface covered by a cloth
or other material that can be pulled away.
Risk of electric shock or fire
- Ensure that no part of the TV hangs over the edge
of the mounting surface.
- Never expose the TV to rain or water. Never place
liquid containers, such as vases, near the TV.
If liquids are spilt on or into the TV, disconnect the TV
from the power outlet immediately.
Contact Philips TV Consumer Care to have the TV
checked before use.
- Never place the TV on tall furniture, such as a
bookcase, without anchoring both the furniture and
TV to the wall or a suitable support.
- Teach children about the dangers of climbing on
furniture to reach the TV.
- Never expose the TV, remote control or batteries to
excessive heat. Never place them near burning
candles, naked flames or other heat sources,
including direct sunlight.
Risk of swallowing batteries !
The remote control may contain coin-type batteries
which can easily be swallowed by small children.
Keep these batteries out of reach of children at all
times.
- Never insert objects into the ventilation slots or
other openings on the TV.
- Never place heavy objects on the power cord.
- Avoid force coming onto power plugs. Loose power
plugs can cause arcing or fire. Ensure that no strain is
exerted on the power cord when you swivel the TV
screen.
Risk of overheating
Never install the TV in a confined space. Always leave
a space of at least 10 cm or 4 inches around the TV
for ventilation. Ensure curtains or other objects never
cover the ventilation slots on the TV.
- To disconnect the TV from the mains power, the
power plug of the TV must be disconnected. When
disconnecting the power, always pull the power plug,
never the cord. Ensure that you have full access to
the power plug, power cord and outlet socket at all
times.
55
Lightning storms
Disconnect the TV from the power outlet and antenna
before lightning storms.
During lightning storms, never touch any part of the
TV, power cord or antenna cable.
Risk of hearing damage
Avoid using earphones or headphones at high
volumes or for prolonged periods of time.
Low temperatures
If the TV is transported in temperatures below 5°C or
41°F, unpack the TV and wait until the TV temperature
reaches room temperature before connecting the TV
to the power outlet.
Humidity
In rare occasions, depending on temperature and
humidity, minor condensation can occur on the inside
of the TV glass front (on some models). To prevent
this, do not expose the TV to direct sunlight, heat or
extreme humidity. If condensation occurs, it will
disappear spontaneously while the TV is playing for a
few hours.
The condensation moisture will not harm the TV or
cause malfunction.
18.2
Screen care
- Never touch, push, rub or strike the screen with any
object.
- Unplug the TV before cleaning.
- Clean the TV and frame with a soft damp cloth and
wipe gently. Never use substances such as alcohol,
chemicals or household cleaners on the TV.
- To avoid deformations and colour fading, wipe off
water drops as quickly as possible.
- Avoid stationary images as much as possible.
Stationary images are images that remain onscreen
for extended periods of time. Stationary images
include onscreen menus, black bars, time displays,
etc. If you must use stationary images, reduce screen
contrast and brightness to avoid screen damage.
56
procedures not recommended or authorised in this
manual, shall void the warranty.
19
Terms of use,
copyrights and
licenses
Pixel characteristics
This LCD/LED product has a high number of colour
pixels. Although it has effective pixels of 99.999% or
more, black dots or bright points of light (red, green or
blue) may appear constantly on the screen. This is a
structural property of the display (within common
industry standards) and is not a malfunction.
19.1
CE compliance
Hereby, TP Vision Europe B.V. declares that this
television is in compliance with the essential
requirements and other relevant provisions of
Directives 2014/53/EU (RED), 2009/125/EC (Eco
Design), 2010/30/EU (Energy Labelling) and
2011/65/EC (RoHS).
Terms of use
2016 © TP Vision Europe B.V. All rights reserved.
This product was brought to the market by TP Vision
Europe B.V. or one of its affiliates, hereinafter referred
to as TP Vision, which is the manufacturer of the
product. TP Vision is the warrantor in relation to the
TV with which this booklet was packaged. Philips and
the Philips Shield Emblem are registered trademarks
of Koninklijke Philips N.V.
Compliance with EMF
TP Vision manufactures and sells many products
targeted at consumers which, like any electronic
apparatus, in general have the ability to emit and
receive electromagnetic signals. One of TP Vision’s
leading business principles is to take all necessary
health and safety measures for our products, to
comply with all applicable legal requirements and to
stay well within the Electro Magnetic Field (EMF)
standards applicable at the time of producing the
products.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips N.V
or their respective owners. TP Vision reserves the right
to change products at any time without being obliged
to adjust earlier supplies accordingly.
The written material packaged with the TV and the
manual stored in the memory of the TV or
downloaded from the Philips
website www.philips.com/support are believed to
be adequate for the intended use of the system.
TP Vision is committed to developing, producing and
marketing products that cause no adverse health
effects. TP Vision confirms that, as long as its products
are handled properly for their intended use, they are
safe to use according to scientific evidence available
today. TP Vision plays an active role in the
development of international EMF and safety
standards, enabling TP Vision to anticipate further
developments in standardisation for early integration
in its products.
The material in this manual is believed adequate for
the intended use of the system. If the product, or its
individual modules or procedures, are used for
purposes other than those specified herein,
confirmation of their validity and suitability must be
obtained. TP Vision warrants that the material itself
does not infringe any United States patents. No
further warranty is expressed or implied. TP Vision
cannot be held responsible neither for any errors in
the content of this document nor for any problems as
a result of the content in this document. Errors
reported to Philips will be adapted and published on
the Philips support website as soon as possible.
19.2
Copyrights and licenses
HDMI
Terms of warranty - Risk of injury, damage to TV or
void of warranty!
Never attempt to repair the TV yourself. Use the TV
and accessories only as intended by the
manufacturer. The caution sign printed on the back of
the TV indicates risk of electric shock. Never remove
the TV cover. Always contact Philips TV Customer
Care for service or repairs. Find the telephone number
in the printed documentation that came with the
TV. Or consult our
website www.philips.com/support and select your
country if needed. Any operation expressly prohibited
in this manual, or any adjustments and assembly
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
57
Dolby Digital Plus
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
DTS 2.0 + Digital Out ™
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS
2.0+Digital Out is a trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.
Kensington
Kensington and Micro Saver are registered US
trademarks of ACCO World Corporation with issued
registrations and pending applications in other
countries throughout the world.
MHEG software
The copyright in MHEG software ("the Software")
comprised in this television ("this product") and
included to enable you to use interactive television
features is owned by S&T CLIENT SYSTEMS LIMITED
("the Owner"). You are permitted to use the Software
only in conjunction with this product.
Other trademarks
All other registered and unregistered trademarks are
the property of their respective owners.
58
Index
A
Contrast, Video Contrast 33
Antenna connection 4
Antenna, Manual Installation 45
Audio commentary 41
Audio Description 41
Audio Language 21
Audio Language, Primary 21
Audio Language, Secondary 21
Audio Out - Optical, tips 8
Audio Out Delay 10
Audio Out Format 11
Audio Out Levelling 11
Audio Out Offset 11
Audio Out Settings 10
Audio to Video Sync 10
Auto Volume Levelling 35
Automatic Channel Update 43
Automatic switch off 16
D
B
G
Backlight Contrast 32
Bass 35
Blu-ray Disc player, connect 11
Game Console, connect 12
Game or Computer 28
Game or Computer, setting 32
Gamma 33
Digital Text 22
Disposal of TV or batteries 49
DVB (Digital Video Broadcast) 43
DVD player 12
E
EasyLink 7
EasyLink, On or Off 8
EasyLink, Remote control 8
Eco settings 37
End of use 49
European Ecolabel 49
F
Frequency Scan 44
Frequency Step Size 44
C
H
Cable, Manual Installation 45
CAM PIN 9
CAM, Conditional Access Module 9
Camcorder, connect 14
Channel 19
Channel List 19
Channel List Copy 45
Channel List Copy, copy 46
Channel List Copy, current version 46
Channel List Copy, upload 46
Channel List, about 20
Channel Update Message 43
Channel, Antenna installation 43
Channel, Automatic Channel Update 43
Channel, Cable Installation 43
Channel, Manual channel update 43
Channel, Options 20
Channel, Reinstall 43
Channel, TV guide 23
Child Lock 41
CI+ 9
Clear Sound 36
Clock settings 39
Colour 32
Colour, Colour enhancement 32
Colour, colour temperature 32
Colour, custom colour temperature 33
Common Interface Slot 9
Computer, connect 14
Connect, USB Flash Drive 13
Connectivity Guide 7
Consumer Care 54
Contact Philips 54
Contrast 32
Contrast, Contrast Mode 33
Contrast, Dynamic Contrast 33
Contrast, Gamma 33
Hard of hearing 41
HDMI, ARC 7
HDMI, DVI connection 8
Headphones Volume 37
Headphones, connect 12
Hearing impaired 41
Home Menu 27
Home Theatre System, Multichannel 11
Home Theatre System, problems 11
Home Theatre System, volume levelling 11
I
Incredible Surround 35
L
Language settings 37
M
Media 29
Media files, from a USB drive 29
MPEG Artefact Reduction 34
N
Network Frequency 44
Network installation 6
Network, connect 6
Network, settings 6
Network, static IP 6
Network, view settings 6
Network, wired 6
Noise Reduction 34
O
On a TV stand, TV Placement 37
On the wall, TV Placement 37
Online support 53
Open Source software 47
59
Options on a Channel 20
TV Guide, Reminder 23
TV Installation 43
P
U
Partially sighted 41
Pause TV 26
Photo camera, connect 14
Photos, videos and music 29
Picture Format, advanced 34
Picture Format, basic 34
Picture Style 31
Picture, Backlight Contrast 32
Picture, Colour 32
Picture, Sharpness 32
Placement, TV placement 4
Placement, viewing distance 4
Power connection 4
Problems 52
Problems, Channels 52
Problems, Connection, HDMI 53
Problems, Connection, USB 53
Problems, Picture 52
Problems, Remote control 52
Problems, Sound 53
Product Fiche 49
Universal access 41
Universal access, Hard of hearing 41
Universal Access, Speakers/Headphones 42
USB Hard Drive, disk space 13
USB Hard Drive, Installation 13
V
Visually impaired 41
W
Wired network 6
R
Radio stations 20
Reception Quality 45
Recording 25
Register your product 52
Reinstall TV 43
Remote control and batteries 18
Repair 54
S
Safety instructions 55
SCART connection, tips 8
Screen care 56
Sharpness 32
Sharpness, MPEG Artefact Reduction 34
Sharpness, Noise reduction 34
Sleep Timer 16
Smart Card, CAM 9
Sound Style 34
Sound, Auto Volume Levelling 35
Sound, Bass 35
Sound, Clear Sound 36
Sound, Headphones Volume 37
Sound, surround mode 35
Sound, Treble 35
Subtitle Language 20
Subtitle Language, Primary 21
Subtitle Language, Secondary 21
Support, online 53
Surround Mode 35
Switch off timer 16
Switching on 16
Synchronise Audio and Video 10
T
Teletext 22
Terms of Use 57
Test Reception 45
Text 22
Text language, Primary 22
Text language, Secondary 22
Treble 35
TV Guide 23
60
Powered by TCPDF (www.tcpdf.org)
61
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising