Philips | HTS3568/98 | Quick Start Guide | Philips DVD home theatre system HTS3568/98 Quick start guide

Philips DVD home theatre system HTS3568/98 Quick start guide
3
Enjoy
Start disc play
Register your product and get support at
www.philips.com/welcome
HTS3568
Play other supported devices
A Press Z to open the disc tray.
OPEN
MIC
MIC LEVEL
MP3 LINK
1
2
3
USB device
B Place a disc with the disc label facing up.
C Press Z to close the disc tray and start disc play.
D If the disc menu is displayed on the TV, use cursor
buttons to select an option in the menu, then press
OK.
z To enjoy powerful surround sound, press
SURROUND to turn on the multi-channel
surround mode.
E Press x to stop play.
Note When you press u, playback resumes from
where it was last stopped. To start playback from the
beginning, press while the message is displayed.
A
B
C
D
Insert your USB device to
(USB) socket.
Press USB to switch to ‘USB’ mode.
Select a file to play, then press u.
To stop play, press x or remove the USB device.
Other portable media player
A Connect a 3.5mm stereo audio cable (not supplied)
from the MP3 LINK socket to the headphone
output socket on your portable media player.
Connect
Set up
Enjoy
Quick Start Guide
B Press AUX/MP3 LINK repeatedly until ‘MP3
LINK’ is displayed.
C Press PLAY on your portable media player.
What’s in the box?
User
Manual
DVD Home Theatre (main unit)
FM wire antenna
Remote Control
and 2 batteries
4 Screws
Need help?
1 centre, 2 front, 2 rear speakers
and subwoofer
User Manual
See the user manual that came with your Philips DVD Home Theatre System.
2008 C Koninklijke Philips N.V.
All rights reserved.
www.philips.com
sgpjp-0830/98-eng1
Power cable
Composite
video cable
Speaker
cables
1
A
2
Connect
Placement
C
Assemble the tallboy speakers
Proper speakers system placement is important to
ensure optimum sound performance.
REAR
LEFT
FRON
T
LEFT
E
Connect radio antenna and power
cable
Keep the antennas away from the electronic devices to
prevent unwanted interference.
A
CENT
ER
B
FRON
T
RIGHT
A Connect the speaker cables to the matching colour
A
Set up
Find the viewing channel
A Press 2 to turn on this DVD Home Theatre unit.
B Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT, ° button) until
you see the Video In channel.
Main Unit (rear)
sockets on the speakers (or speaker stands).
REAR
RIGHT
SUB
B Place the stands upright and lock the speakers down
WOO
FER
B
into position.
FM antenna
A Press OPTIONS.
C Secure the position with screws.
A Connect the FM antenna to the inner pin of the FM
A Place the centre speaker above or close to the TV.
B Place the subwoofer on the floor, at least one metre
away from the TV.
C Place the front speakers at equal distances from the
TV.
D Place the rear speakers at the back or beside the
D
Select on-screen display language
Connect the speakers and subwoofer
Connect the various coloured plugs from the speakers
and subwoofer to the same coloured sockets at the rear
of the main unit.
75 socket (for some models, it has been
connected in the factory). Extend the wire for
optimum reception.
[ General Setup ] menu is displayed.
B Press B.
General Setup
B Connect the power cable from the main unit to the
AC power outlet.
FRONT FRONT
RIGHT LEFT
REAR
RIGHT
FRONT CENTER
CVBS
SUBWOOFER
REAR
LEFT
Connect audio output from TV
(optional)
To hear the TV audio through this DVD Home Theatre
unit, connect an audio cable (not supplied) from the
AUDIO IN-AUX1 sockets to the AUDIO OUT sockets
on your TV.
Main Unit (rear)
Main Unit (rear)
VIDEO IN
Melayu
Sleep
Русский
DivX(R) VOD Code
ไทย
Press OPTIONS to exit menu
C Press V to select [ OSD Language ], then press B.
D Press vV to select a language option, then press
OK.
E Press OPTIONS to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this DVD
Home Theatre unit, not for the DVD disc menu.
AUX 1
z Connect the composite video cable from the CVBS
socket to the VIDEO IN socket on your TV.
Note If your TV supports HDMI, connect this unit
to your TV using HDMI connection for better picture
quality. See the accompanying user manual for more
information.
English
Screen Saver
F
Connect to TV
Auto
OSD Language
listening position.
B
Disc Lock
Display Dim
Note To listen to the audio output from this
connection, press AUX/MP3 LINK repeatedly
until ‘AUX 1’ is displayed on the display panel.
There are various setup options (Audio Setup, Video
Setup, Preferences) available on this DVD Home
Theatre unit. Refer to the user manual for more
information.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising