3 Register your product and get support at Enjoy Start disc play HTS9810 Play other supported devices USB device / A Insert a disc with its label facing out. www.philips.com/welcome B Disc play starts. If not, touch the u symbol on the screen. A B C D Insert your USB device to 1 2 3 (USB) socket. Press USB to switch to ‘USB’ mode. Select a file to play, then press u. To stop play, press x or remove the USB device. Other portable media player Set up Enjoy Quick Start Guide / MP3 Connect What’s in the box? Optional cables z Control buttons on the main unit are operated through touch screen display. z If the disc menu is displayed on the TV, use cursor buttons on the remote control to select an option in the menu, then press OK. C Press x to stop play. D Press Z to eject the disc. User Manual A Connect a 3.5mm stereo audio cable (supplied) from the MP3 LINK socket to the headphone output socket on your portable media player. (not required for basic connection) B Press AUX/DI/MP3 LINK repeatedly until ‘MP3 Junction Box LINK’ is displayed. C Press PLAY on your portable media player. 3.5mm stereo audio cable (for MP3 LINK) DVD Home Theatre (main unit) Note When you press u, playback resumes from where it was last stopped. To start playback from the beginning, press while the message is displayed. Velcro strip (for Junction Box) Remote Control and 2 batteries Micro fibre cleaning cloth Software cable FM wire antenna Subwoofer 2x Power cables Need help? AM/MW loop antenna User Manual See the user manual that came with your Philips DVD Home Theatre System. Composite Video cable 2008 C Philips Consumer Lifestyle All rights reserved. 12nc: 3139 245 31461 sgpjp_832/ap-eng 1 centre, 2 front and 2 rear speakers Interconnect cable (between Junction Box and Subwoofer ) HDMI cable 1 2 Connect Basic connection A Placement C Proper speakers system placement is important to ensure optimum sound performance. Connect speakers FRONT RIGHT FRONT LEFT REAR RIGHT CENTER REAR LEFT EasyLink control) To hear the TV audio through this DVD Home Theatre unit, connect an audio cable (not supplied) from the AUDIO IN-AUX1 sockets to the AUDIO OUT sockets on your TV. FRONT LEFT REAR LEFT Optional connection A Connect audio output from TV (for A Set up Find the viewing channel A Press 2 to turn on this DVD Home Theatre unit. B Turn on the TV. Use the TVs remote control to select the correct viewing channel. Note To search for the correct viewing channel, press the Channel Down button on the TVs remote control repeatedly (or AV, SELECT, ° button) until you see the Video In channel. Junction box (rear) FRONT RIGHT B 1 REAR RIGHT RIGHT SUBWOOFER CENTER LEFT Subwoofer (rear) AUDIO IN 2 When you turn on this DVD Home Theatre unit for the first time, follow the instructions on the TV to complete the setup. AUX 1 2 Start Ambisound setup OSD Language Please choose your language: B A Connect the FRONT LEFT, FRONT RIGHT and Connect to TV CENTER speakers to the matching sockets on the subwoofer. Junction box (rear) HDMI IN B Connect the REAR RIGHT speaker cable to the English Melayu Русский ไทย Note To listen to the audio output from this connection, press AUX/DI /MP3 LINK repeatedly until ‘AUX1 INPUT’ is displayed on the display panel. Stop: Exit REAR LEFT speaker socket, then connect the power cable to the AC power outlet. OR B Main unit (rear) D HDMI OUT Main unit (rear) B. B [ Welcome ] message is displayed, press B to Subwoofer (rear) continue. 2 Subwoofer (rear) 1 TO MAIN UNIT socket to the HDMI IN socket on your TV. Note HDMI connection does not support audio output from your TV to this unit, a separate audio connection is required. If your TV supports composite video A Connect a composite video cable from the VIDEO OUT socket on the junction box to the VIDEO IN socket on your TV. Note Refer to the accompanying user manual for other possible video connections. type of walls that surround your room, then press B to select. D [ Rear Speaker Placement ] message is displayed, E When [ Complete ] screen is displayed, press B to If your TV supports HDMI A Remove the main unit cover by pushing it upwards B Connect the HDMI cable from the HDMI OUT C [ Room Acoustics ] message is displayed, select the select the placement of the rear speakers in your room, then press B to select. 1 and outwards. Select A Select a language for on-screen display, then press Connect radio antenna Connect main unit, junction box and subwoofer Change exit. 2 TO SUBWOOFER Junction box (rear) A Connect the AM/MW loop antenna to the AM/MW 3 TO JUNCTION BOX A Unwind the DC cable from the main unit and connect it to the TO MAIN UNIT on the junction box. B Connect interconnect cable between TO SUBWOOFER socket on the junction box and TO JUNCTION BOX socket on the subwoofer. C Connect the power cable from subwoofer to the AC power outlet. socket. Place it on a shelf, or attach it to a stand or wall. B Connect the FM antenna to the inner pin of the FM 75 socket (for some models, it has been connected in the factory). Extend the wire for optimum reception. Note Refer to the accompanying user manual for other setup options.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project