Philips | HTS3548W/93 | Quick Start Guide | Philips DVD home theatre system HTS3548W/98 Quick start guide

Philips DVD home theatre system HTS3548W/98 Quick start guide
3
HTS3548W
DVD HOME THEATRE SYSTEM
Enjoy
Start disc playback
Quick Start Guide
Playback other supported
devices
A Press OPEN/CLOSE ç to open the disc tray.
USB device
A
B
C
D
B
C
D
E
Insert your USB device to the USB socket.
Press DISC/USB to switch to ‘USB’ mode.
Press u to start playback.
To stop playback, press DISC/USB to switch to
‘DISC’ mode. You can unplug your USB device now.
1
2
3
Place a disc with the disc label facing up.
Press OPEN/CLOSE ç to close the disc tray.
Playback starts automatically.
MP3 LINE-IN
If the disc menu appears on the TV, use
keys or the numeric keypad to
select an option in the menu and press OK
to start playback.
USB
-
z To enjoy the powerful surround sound
from the speakers, press SURROUND
on the remote control to turn on the
multi-channel surround mode.
Set up
Enjoy
Other portable audio player
A Use the supplied MP3 LINE-IN cable to connect the
F Press „ to stop playback.
Note When you press u button, playback
resumes from where it last stopped. To start
playback from the beginning, you have to press
Connect
headphone output socket on your portable audio
player to MP3 LINE-IN socket.
.
What’s in the box?
B Press PLAY on your portable audio player.
C Press MP3 LINE-IN to listen to the playback.
Main Unit
Troubleshooting
Remote Control
and 2 batteries
Composite
video cable
Power cables
(2x)
For more troubleshooting tips, see the user manual.
No picture.
•
•
Press DISC/USB on the remote control.
Check the connection to the TV and ensure the plugs are firmly in place.
User
Manual
No sound.
•
•
•
Check the speaker connections and settings.
Check the audio connections and press SOURCE to select the correct input source.
Press SURROUND to turn on the multi-channel surround output.
Screws and Allen key
(for connecting the
tall speakers)
If the indicator on the wireless transmitter blinks continuously for more than one minute.
•
FM wire
antenna
AM/MW
loop antenna
Press and hold CONNECT button on the wireless transmitter for 5 seconds. Turn on the wireless receiver.
Need help?
User Manual
See the user manual that came with your Philips DVD Home Theatre System.
Online
Go to www.philips.com/welcome
2007 C Koninklijke Philips N.V.
All rights reserved.
1 centre, 2 front, 2 rear speakers
and subwoofer
MP3 LINE-IN cable
Wireless receiver
Wireless transmitter
www.philips.com
hts3548w_98qsg_eng2.indd 1
2007-05-02 10:49:01 AM
1
A
Connect
2
Placement
C
Proper speakers system placement is important to
ensure optimum sound performance.
Connect the wireless transmitter to
the main unit
E
Connect the radio antennas and
power cable
Keep the antennas away from the electronic devices to
prevent unwanted interference.
A
REAR
LEFT
FRON
T
LEFT
CENT
ER
C
WIRELESS
TRANSMITTER
FRON
T
RIGHT
Finding the viewing channel
A Press 2 (STANDBY ON) on the main unit to turn
it on.
B Turn on the TV. Use the TVs remote control to
WIRELESS
TRANSMITTER
FM antenna
Set up
select the correct viewing channel.
A
STANDBY-ON
Main Unit (rear)
WIRELESS
TRANSMITTER
REAR
RIGHT
SUBW
OOFE
R
B
TRANSMITTER socket at the rear of the main unit.
A Place the centre speaker above or close to the TV.
B Place the subwoofer on the floor, at least one metre
away from the TV.
C Place the front speakers at equal distances from the
AM/MW antenna
D
Connect the speakers and
subwoofer
A Connect the FM antenna to the inner pin of the
FM 75 socket. Extend the wire for optimum
reception.
TV.
D Place the rear speakers at the back or beside the
listening position.
FRONT FRONT
LEFT
RIGHT
B Unfold the AM/MW loop antenna and fix the claw
REAR
RIGHT
FRONT CENTER
REAR
LEFT
E Place the wireless receiver at the back of the room
facing the wireless transmitter at the main unit.
B
into the slot. Push the tabs and insert the wires into
the AM/MW sockets.
F
Television (rear)
WIreless
Receiver
(botom)
To hear the TV audio through this home theatre system,
use a red and white audio cables (not supplied) to
connect the AUDIO IN-TV sockets on the main unit to
the AUDIO OUT sockets on your TV.
AUDIO
OUT
CVBS
AUDIO IN
Y
Television
(rear)
WIRELESS
TRANSMITTER
Main Unit (rear)
Disc Lock
Display Dim
Program
OSD Language
Screen Saver
Sleep
DivX(R) VOD Code
English
Melayu
Русский
ไทย
SETUP
B Press
C Use
to select { OSD Language } and press
.
Note The language set here is only for the menus
that are shown on the TV while operating this Home
Theatre system, not for the DVD disc menu.
COAXIAL
There are various setup options (Audio Setup, Video
Setup, Preference Setup) available on this Home Theatre
System. Refer to the user manual for more information.
A Connect the tall speakers, secure it with the supplied
screw using the Allen key.
WIRELESS
TRANSMITTER
z Connect a composite video cable (supplied) from the
CVBS socket on the main unit to the VIDEO IN
socket on your TV.
Note It is important to connect the main unit
directly to your TV.
hts3548w_98qsg_eng2.indd 2
General Setup Page
D Press SETUP to exit.
VIDEO OUT
S-VIDEO
The { General Setup Page } appears.
keys to select a language option in the
menu and press OK to confirm.
AUDIO OUT
Main Unit (rear)
A Press SETUP.
Connect audio output from TV
(optional)
AUDIO
OUT
Pb
Select the display language on the
screen
wireless receiver to the AC power outlet.
VIDEO IN
(CVBS)
Pr
B
C Connect the power cables from the main unit and
SUBWOOFER
Connect the main unit to TV
VIDEO IN
(CVBS)
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT, ° button) until
you see the Video In channel.
z Connect the wireless transmitter to the WIRELESS
B Connect the subwoofer, front and centre speakers
Main Unit (rear)
to the same coloured sockets at the rear of the main
unit.
C Connect the rear speakers to the same coloured
sockets at the bottom of the wireless receiver.
Note Press TV on the remote control to get the
sound output from the speakers system when watching
the TV programmes.
2007-05-02 10:49:05 AM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising