Philips | HTS9810/12 | Quick Start Guide | Philips 5.1 Home theatre HTS9810/12 Quick start guide

Philips 5.1 Home theatre HTS9810/12 Quick start guide
3
Register your product and get support at
Enjoy
www.philips.com/welcome
EasyLink control
This feature is only applicable if this DVD Home Theatre
unit is connected to HDMI CEC compliant TV/device
using HDMI cable. It enables all the linked devices
response or react to certain commands simultaneously
with one touch control.
Satellite Receiver /
Cable Box
HDMI
HDMI CEC
TV
HDMI
HTS9810
One touch audio input switching
HDD / DVD Recorder
AUDIO
AUDIO
Subwoofer
Junction box
This unit is able to render the audio signals from the
active source and switch automatically to the
corresponding audio input.
Before you can enjoy this feature, connect audio cables
from this unit to your TV/devices and follow the
instructions below to map the audio inputs to the
connected devices.
A
B
C
D
Press OPTIONS.
Press B.
Select [ EasyLink ], then press B.
General Setup
EasyLink
Auto Wake-up TV
Disc Lock
System Standby
Display Dim
System Audio Control
OSD Language
Audio Input Mapping
Screen Saver
Sleep Timer
Standby Mode
DivX(R) VOD Code
A Turn on the HDMI CEC operations on your TV and
other connected devices. See TVs/devices manual for
details.
B You can now enjoy the EasyLink controls.
One touch play [ Auto Wake-up TV ]
A Press PLAY.
It turns on this unit and start disc play (if a video disc
is detected), and your TV automatically turns on and
switches to the correct viewing channel.
1
2
3
Press DISC.
E Select [ System Audio Control ] > [ On ], then
press OK.
Connect
Set up
Enjoy
Quick Start Guide
What’s in the box?
F Select [ Audio Input Mapping ], then press OK.
G Select [ OK ] in the menu, then press OK to start
User
Manual
scanning of devices.
Optional cables
(not required for basic
connection)
H When scanning complete, select the audio input of
this unit that is used to connect to your TV/device
(e.g. AUX1 Input), then press B.
Junction Box
I Select the TV/device (appeared in its brand name)
in the right panel, then press OK.
Note This is only possible if this unit is in standby
mode. If this unit is in active mode, you have to press
DISC followed by PLAY to start disc play.
One touch power off [ System Standby ]
A Press and hold 2.
J Repeat steps 8~9 to map other connected devices.
K To exit the menu, press OPTIONS.
DVD Home Theatre (main unit)
Velcro strip
(for Junction Box)
Remote Control
and 2 batteries
Micro fibre
cleaning cloth
3.5mm stereo audio
cable (for MP3 LINK)
Note Philips does not guarantee 100%
interoperability with all HDMI CEC compliant devices.
It turns off all linked devices.
Software cable
Note This unit responses to standby command from
other HDMI CEC compliant TV/devices.
Subwoofer
2x Power cables
Need help?
User Manual
See the user manual that came with your Philips DVD Home Theater System.
2008 C Philips Consumer Lifestyle
All rights reserved.
12nc: 3139 245 30981
sgpjp_828/12-eng1
1 centre, 2 front and 2 rear
speakers
Interconnect cable
(between Junction Box
and Subwoofer )
HDMI cable
Scart cable
FM wire antenna
1
2
Connect
Basic connection
A Placement
C
Proper speakers system placement is important to
ensure optimum sound performance.
REAR LEFT
Connect speakers
FRONT
RIGHT
FRONT
LEFT
REAR
RIGHT
CENTER
REAR
LEFT
Optional connection
A Connect audio output from TV (for
EasyLink control)
To hear the TV audio through this DVD Home Theatre
unit, connect an audio cable (not supplied) from the
AUDIO IN-AUX1 sockets to the AUDIO OUT sockets
on your TV.
FRONT LEFT
Junction box (rear)
A
Set up
Find the viewing channel
A Press 2 to turn on this DVD Home Theatre unit.
B Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT, ° button) until
you see the Video In channel.
FRONT RIGHT
REAR RIGHT
B
1
SUBWOOFER
RIGHT
CENTER
LEFT
Subwoofer
(rear)
AUDIO IN
2
AUX 1
2
B
Connect to TV
When you turn on this DVD Home Theatre unit for the
first time, follow the instructions on the TV to complete
the setup.
OSD Language
Please choose your language:
English
Dansk
Deutsch
Español
Français
Italiano
A Connect the FRONT LEFT, FRONT RIGHT and
Junction box (rear)
HDMI IN
Start Ambisound setup
CENTER speakers to the matching sockets on the
subwoofer.
B Connect the REAR RIGHT speaker cable to the
Note To listen to the audio output from this
connection, press AUX/DI /MP3 LINK repeatedly
until ‘AUX1 INPUT’ is displayed on the display panel.
Stop: Exit
REAR LEFT speaker socket, then connect the power
cable to the AC power outlet.
Or
SCART
OUT
B
D
HDMI
OUT
Connect main unit, junction box and
subwoofer
Main unit (rear)
SCART
TO
MAIN
UNIT
Main unit (rear)
Note HDMI connection does not support audio
output from your TV to this unit, a separate audio
connection is required.
If your TV supports Scart
A Connect a scart cable from the SCART OUT socket
on the junction box to the SCART IN socket on
your TV.
Note Refer to the accompanying user manual for
other possible video connections.
B.
B [ Welcome ] message is displayed, press B to
Subwoofer (rear)
continue.
C [ Room Acoustics ] message is displayed, select the
1
type of walls that surround your room, then press B
to select.
D [ Rear Speaker Placement ] message is displayed,
select the placement of the rear speakers in your
room, then press B to select.
E When [ Complete ] screen is displayed, press B to
exit.
2
and outwards.
socket to the HDMI IN socket on your TV.
Select
A Select a language for on-screen display, then press
Connect radio antenna
1
If your TV supports HDMI
A Remove the main unit cover by pushing it upwards
B Connect the HDMI cable from the HDMI OUT
Subwoofer (rear)
Change
A Connect the FM antenna to the inner pin of the
TO
SUBWOOFER
Junction box
(rear)
3
TO JUNCTION
BOX
A Unwind the DC cable from the main unit and
connect it to the TO MAIN UNIT on the junction
box.
B Connect interconnect cable between TO
SUBWOOFER socket on the junction box and TO
JUNCTION BOX socket on the subwoofer.
C Connect the power cable from subwoofer to the AC
power outlet.
FM 75 socket (for some models, this cable has
been connected). Extend the antenna for optimum
reception.
Note Refer to the accompanying user manual
for other setup options.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising