Philips | HTS6100/98 | Owner's Manual | Philips SoundBar DVD home theatre HTS6100/93 User manual

Philips SoundBar DVD home theatre HTS6100/93 User manual
Register your product and get support at
www.philips.com/welcome
HTS6100
EN
DVD Home Theatre System
5
ZH_CN
DVD 家庭影院系统
51
ZH_TW
DVD 家庭劇院系統
97
MS_MY
Sistem Teater Rumah DVD
143
᳝↦᳝ᆇ⠽䋼៪‫ܗ‬㋴
+D]DUGRXV7R[LF6XEVWDQFH
䪙
䚼ӊৡ⿄
1DPHRIWKH3DUWV 3E/HDG
∲ +J
0HUFXU\
䬝 &G
&DGPLXP
݁Ӌ䫀
&KURPLXP
໮⒈㘨㣃
3%%
໮⒈Ѡ㣃䝮
3%'(˅
+RXVLQJ
໪໇
O
O
O
O
O
O
'9'ORDGHU
'9'‫Ⲧܝ‬
6XEZRRIHU
䍙䞡Ԣ䷇ㆅ
X
O
O
O
O
O
X
O
O
O
O
O
/RXGVSHDNHUV
୛ুऩ‫ܗ‬
O
O
O
O
O
O
3:%V
⬉䏃ᵓ㒘ӊ
X
O
O
O
O
O
$FFHVVRULHV
5HPRWHFRQWURO FDEOHV
䰘ӊ˄䘹᥻఼ˈ
⬉⑤㒓ˈ䖲᥹㒓˅
X
O
O
O
O
O
%DWWHULHVLQ
5HPRWH&RQWURO
=Q& 䘹᥻఼⬉∴
X
O
O
O
O
O
ƻ˖㸼⼎䆹᳝↦᳝ᆇ⠽䋼೼䆹䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ৿䞣ഛ೼6-7ᷛ‫ޚ‬㾘ᅮⱘ䰤䞣㽕∖ҹϟDŽ
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement in SJ/T11363 – 2006.
h˖㸼⼎䆹᳝↦᳝ᆇ⠽䋼㟇ᇥ೼䆹䚼ӊⱘᶤϔഛ䋼ᴤ᭭Ёⱘ৿䞣䍙ߎ6-7̢ᷛ‫ޚ‬㾘ᅮⱘ䰤䞣㽕∖DŽ
X: Indicates that this toxic or hazardous substance contained in at least one of the
homogeneous materials used for this part is above the limit requirement in SJ/T11363 - 2006.
10
⦃ֱՓ⫼ᳳ䰤Environmental Protection Use Period
ℸᷛ䆚ᣛᳳ䰤˄कᑈ˅ˈ⬉ᄤֵᙃѻકЁ৿᳝ⱘ᳝↦᳝ᆇ⠽䋼៪‫ܗ‬㋴೼ℷᐌՓ⫼ⱘᴵӊϟϡӮথ
⫳໪⊘៪さবˈ⫼᠋Փ⫼䆹⬉ᄤֵᙃѻકϡӮᇍ⦃๗䗴៤Ϲ䞡∵ᶧ៪ᇍ݊Ҏ䑿ǃ䋶ѻ䗴៤Ϲ䞡ᤳᆇ
ⱘᳳ䰤DŽ
This logo refers to the period ( 10 years ) during which the toxic or hazardous substances or elements
contained in electronic information products will not leak or mutate so that the use of these [substances or
elements] will not result in any severe environmental pollution, any bodily injury or damage to any assets.
⬉∴ᷛ䆚Battery labeling logo
⦃ֱՓ⫼ᳳ䰤Environmental Protection Use Period
ℸᷛ䆚ᣛᳳ䰤˄Ѩᑈ˅ˈ⬉∴Ё৿᳝ⱘ᳝↦᳝ᆇ⠽䋼៪‫ܗ‬㋴೼ℷᐌՓ⫼ⱘᴵӊϟϡӮথ⫳໪⊘៪さ
বˈ⫼᠋Փ⫼䆹⬉∴ѻકϡӮᇍ⦃๗䗴៤Ϲ䞡∵ᶧ៪ᇍ݊Ҏ䑿ǃ䋶ѻ䗴៤Ϲ䞡ᤳᆇⱘᳳ䰤DŽ
This logo refers to the period ( 5 years ) during which the toxic or hazardous substances or elements
contained in the battery will not leak or mutate so that the use of these [substances or elements] will not
result in any severe environmental pollution, any bodily injury or damage to any assets.
2
3
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic and the double-D
symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents
issued & pending. DTS and DTS Digital
Surround are registered trademarks and the
DTS logos and Symbol are trademarks of DTS,
Inc. © 1996-2007 DTS, Inc. All Rights Reserved.
DivX, DivX Ultra Certified, and associated logos
are trademarks of DivX, Inc. and are used under
license.
Official DivX® Ultra Certified product.
Plays all versions of DivX ® video (including
DivX ® 6) with enhanced playback of DivX®
media files and the DivX® Media Format.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States and/
or other countries.
CLASS 1
LASER PRODUCT
4
HDMI, and HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, Inc.
ENERGY STAR and the ENERGY
STAR mark are registered U.S. marks
‘CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD
DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS
MODEL 525p AND 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.’
LASER
•
Type
•
Wave length
•
Output Power
•
Beam divergence
Semiconductor laser
GaAIAs
645 - 660 nm (DVD)
770 - 800 nm (CD)
6 mW (DVD)
7 mW (VCD/CD)
60 degrees
1 Important
Safety and important notice
2 Your product
Features highlight
Product overview
3 Connect
Place the unit
Connect video cables
Connect subwoofer
Connect radio antenna
Connect audio cables/other devices
Mount the DVD Home Theatre unit
4 Get started
Prepare the remote control
Find the correct viewing channel
Start Ambisound setup
Turn on Progressive Scan
Activate EasyLink control
Select a play source
5 Play
Play from disc
Play video
Play music
Play photo
Play from USB device
Play from portable media player
Play from radio
6
35
Control the volume
Adjust Bass/Treble
Select Ambisound
Select a preset sound effect
35
35
35
36
6
7
7
8
7 Adjust settings
37
General setup
Audio setup
Video setup
Preference Setup
37
39
40
42
11
11
12
14
15
15
17
8 Additional information
45
Update software
Care
Specifications
45
45
46
9 Troubleshooting
47
10 Glossary
49
19
19
20
20
22
23
24
25
25
26
29
30
31
32
32
EN
5
English
6 Adjust sound
Contents
Contents
1 Important
Safety and important notice
Warning!
Risk of fire or electric shock!
• Ensure that air can circulate freely through the
•
•
•
•
•
ventilation holes on this unit. Allow at least 5~10 cm
clearance around the unit.
Never expose this unit to direct sunlight, naked
flames or heat.
Never place this unit on other electrical equipment.
Keep away from this unit during lightning storms.
Never remove the casing of this unit. Please leave all
maintenance work to qualified personnel.
Keep this unit away from water, moisture and liquidfilled objects.
Caution!
• Remove batteries if they are exhausted or if the
remote control is not to be used for a long time.
• Do not mix batteries (old and new or carbon and
alkaline, etc.).
• Batteries contain chemical substances, they should
be disposed of properly.
• Visible and invisible laser radiation when open.
Avoid exposure to beam.
• Where the MAINS plug or an appliance coupler is
used as the disconnect device, the disconnect device
shall remain readily operable.
6
EN
Recycle notice
This electronic equipment contains a large
number of materials that can be recycled or
reused if disassembled by a specialised
company. If you are disposing of an old
machine, please take it to a recycling centre.
Please observe the local regulations regarding
disposal of packaging materials, exhausted
batteries and old equipment.
Copyright notice
This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorised by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorised by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
English
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Ambisound
Philips Ambisound technology reproduces
multi-channel surround sound with fewer
speakers to give an embracing surround
experience without the hassle of setting up a
full range of speaker systems.
The all-in-one SoundBar DVD Home Theatre is
designed to complement your home perfectly.
Enjoy the SoundBar DVD Home Theatre with
state-of-the-art Ambisound surround sound and
picture quality without the clutter of multiple
speakers.
USB direct and MP3 link
Simply plug your USB device into the USB
socket to play your MP3/WMA/JPEG/DivX files;
or plug your portable media player to the MP3
LINK socket to enjoy the music play in superb
sound quality.
Features highlight
Sync the audio output with the video play
This DVD Home Theatre provides you the
feature of delaying the audio output if the video
signals that go directly to the TV is slower than
the audio streams.
Video upscaling to 1080p
You can now watch the DVDs in the highest
picture quality available for your HDTV. This
DVD Home Theatre offers full high-definition
video playback up to 1080p resolution for an
amazing viewing experience. A highly detailed
picture and increased sharpness delivers a more
true-to-life picture.
Region codes
EasyLink
EasyLink uses the HDMI CEC (Consumer
Electronics Control) industry standard protocol
to share functionality with all HDMI CEC
compliant devices over HDMI. It enables the
connected devices to control each other with a
single remote control.
Note
DVD movies are usually not released at the
same time in all regions of the world, thus all
DVD players are programmed to a specific
region code.
Countries
DVD region code
Asia Pacific,
Taiwan, Korea
ALL
3
Australia,
New Zealand
ALL
4
ALL
6
ALL
5
China
• Philips does not guarantee 100% interoperability
with all HDMI CEC devices.
India
EN
7
Your product
2 Your product
Product overview
Remote control
a2
• Turn on this unit or turn off to standby
mode.
• Press and hold to turn off this unit and
all the HDMI CEC compliant TV/
devices (for EasyLink control only).
b Z (Open/Close)
• Open or close the disc compartment.
c Source buttons
• DISC: switch to DISC mode. While in
disc mode, access or exit disc menu.
• USB: switch to USB mode.
• RADIO: switch to FM or AM/MW
band.
• AUX/DI /MP3 LINK: switch to AUX1
INPUT, AUX2 INPUT, AUX3 INPUT,
DIGITAL INPUT or MP3 LINK that
corresponds to the socket you used to
connect the external device.
d HDMI
• Select a video resolution setting for
HDMI output.
e INFO
• Display the current status or disc
information.
• Display photo files in 12 thumbnails
view.
f OPTIONS
• Access or exit Options menu (this
menu provides various setting options).
g u (Play/Pause)
• Start or pause disc play.
• RADIO: start auto radio installation
(only available for first time setup).
8
EN
i TREBLE / BASS
• Switch to treble or bass mode. Then
press VOL +- to set its level setting.
j AUDIO SYNC
• Select an audio language/channel.
• Press and hold to access audio sync
setting. Then press VOL +- to set
the audio delay time.
• RADIO: toggle between FM stereo and
mono mode.
k SOUND
• Select a predefined sound effect.
l REPEAT / PROGRAM
• Select various repeat or shuffle modes;
turns off repeat or shuffle mode.
• RADIO: press this button to start
manual radio preset.
• RADIO: press and hold this button to
start automatic radio preset.
m OK
• Confirm an entry or selection.
n Cursor buttons (v V b B)
• Navigate through the on-screen menu.
• Press left or right for fast backward or
forward search.
• RADIO: press up or down to tune the
radio frequency.
• RADIO: press left or right to start auto
search.
• Return to the previous display menu.
• For DVD, go to title menu.
• For VCD version 2.0 or SVCD with
PBC turned on: return to the menu
during playback.
English
• Stop disc play.
• RADIO: erase the current preset radio
station.
o BACK / TITLE
p í/ ë (Previous/Next)
Your product
h x (Stop)
• Skip to the previous or next title/
chapter/track.
• RADIO: select a preset radio station.
q H (Mute)
• Mute or restore the volume.
r VOL +• Adjust the volume level.
s AMBISOUND
• Select different surround sound
output: auto, multi-channel or stereo.
t Numeric buttons
• Enter a preset number or item to play.
u SUBTITLE
• Select DVD or DivX subtitle language.
v ZOOM
• Zoom in or out the picture on the TV.
w ANGLE
• Select a different viewing angle of a
DVD movie.
EN
9
Main unit
8
9
7
6
5
4
3
2
1
MP3 LINK
a 2 STANDBY-ON
• Turn on this unit or turn off to standby
mode.
• Press and hold to turn on this unit from
a low power standby mode.
b SOURCE
• Select a play media: DISC, USB, RADIO
FM, RADIO AM/MW, DIGITAL INPUT,
AUX1 INPUT, AUX2 INPUT, AUX3
INPUT or MP3 LINK.
c VOL +• Adjust the volume level.
d PLAY PAUSE u
• Start or pause disc play.
• RADIO: start auto radio installation
(only available for first time setup).
STOP x
• Stop disc play.
• RADIO: erase the current preset radio
station.
e OPEN CLOSE Z
• Open or close the disc compartment.
10
EN
f Display panel
g Disc compartment
Left side panel
h MP3 LINK socket
• To connect portable audio player.
i
(USB) socket
• To connect USB flash drive, USB
memory reader or digital camera.
Basic connections:
• Place the unit
• Connect video cables
• Connect subwoofer
• Connect radio antenna
Optional connections:
• Connect audio cables/other devices
• Connect audio from TV
• Connect audio from cable box/
recorder/game console
• Connect portable media player
• Connect USB device
• Mount the DVD Home Theatre unit
• Place this unit on top of a table or mount it
on the wall (see chapter ‘Mount the DVD
Home Theatre unit’).
• Never place this unit in an enclosed cabinet.
• Install this unit near the AC outlet where
the AC power plug can be easily reached.
1
Note
• Refer to the type plate at the rear or bottom of the
•
product for identification and supply ratings.
Before you make or change any connections, ensure
that all the devices are disconnected from the power
outlet.
2
3
Place this DVD Home Theatre unit near to
the TV.
• Place it at a height that is closest to the
listening ear-level.
Position this DVD Home Theatre so that it
is directly parallel to the listening area.
Place the subwoofer at the corner of the
room or at least one metre away from the
TV.
Note
• You may purchase a separate table top stand that
can support both your Philips Plasma/LCD TV and
this DVD Home Theatre unit from the nearest
Philips retailers.
EN
11
English
This section describes the basic connections
required for this DVD Home Theatre unit
before it can be used.
Place the unit
Connect
3 Connect
Connect video cables
This section describes how to connect this
DVD Home Theatre unit to your TV so to
enable viewing of disc play.
Before you connect
1
Push up the catches at the bottom of the
rear cover and lift it up.
Select the best video connection that your TV
can support.
Option 1: Connect to HDMI socket (for a
HDMI, DVI or HDCP-compliant TV).
Option 2: Connect to component video
socket (for a standard TV or Progressive
Scan TV).
Option 3: Connect to video (CVBS) socket
(for a standard TV).
•
•
•
2
Connect the cables to the corresponding
sockets and direct the cables to the
CABLE OUT point.
Note
• You must connect this unit directly to a TV.
3
Once complete, close the rear cover.
Note
• All the cables must be placed properly inside the rear
panel in order for the rear cover to close.
12
EN
Option 2: Connect to component
video socket
English
Option 1: Connect to HDMI socket
Connect
HDMI OUT
COMPONENT
VIDEO OUT
HDMI IN
1
Connect a HDMI cable (supplied) from the
HDMI OUT on this unit to the HDMI IN
socket on your TV.
Note
• The HDMI connector is only compatible with HDMI
compliant TVs and DVI-TVs.
Tips
• To optimise the video output, see chapter ‘Adjust
•
•
•
•
settings’ > [ Video Setup ] > [ HDMI Setup ] for
details.
This unit is HDMI CEC compatible. It enables
connected TV/device to control each other over
HDMI, see chapter ‘Activate EasyLink control’ for
details.
Use a HDMI/DVI adaptor in case your TV has only
a DVI connection. An extra audio connection is
needed to complete this connection.
To route the audio from your TV to this DVD Home
Theatre unit, connect an audio cable from the audio
input on this unit to the audio output on your TV.
This type of connections provide best picture quality.
1
Connect the component video cables (not
supplied) from the Y PB PR sockets on this
unit to the component video input sockets
on your TV.
• If a progressive scan TV is used, you
may turn on the progressive scan mode
(see chapter ‘Turn on Progressive Scan’
for details).
Tips
• The component video input socket on your TV may
be labelled as Y Pb/Cb Pr/Cr or YUV.
• This type of connections provide good picture
quality.
EN
13
Option 3: Connect to Video (CVBS)
socket
Connect subwoofer
2
1
3
LOUDSPEAKERS
TO SUBWOOFER
1
Connect a composite video cable
(supplied) from the VIDEO OUT socket
on this unit to the video input socket on
your TV.
Tips
• The video input socket on your TV may be labelled
as A/V IN, VIDEO IN, COMPOSITE or BASEBAND.
• This type of connections provide standard picture
quality.
14
EN
1
2
3
Unwind the subwoofer’s interconnect
cable at TO MAIN UNIT.
Connect the white end of the interconnect
cable to the LOUDSPEAKERS socket on
this unit.
Connect the grey end of the interconnect
cable to the TO SUBWOOFER socket on
this unit.
3
4
2
1
1
2
3
4
Connect audio from TV
(also used for EasyLink control)
Stand the AM/MW loop antenna
(supplied) upright to fix its claw into the
slot.
Connect the AM/MW loop antenna to the
AM/MW socket. Then place the AM/MW
loop antenna on a shelf, or attach it to a
stand or wall.
Connect the FM antenna (supplied) to the
FM75Ω socket on this unit (for some
models, this cable has been connected).
Extend the FM antenna and fix its ends to
the wall.
Connect the power cord when all the
required connections are complete and
you are ready to enjoy this DVD Home
Theatre unit.
1
Connect an audio cable (not supplied)
from the AUDIO IN-AUX1 sockets on
this unit to the AUDIO OUT sockets on
your TV.
Note
• To listen to the audio output from this connection,
Note
press AUX/DI /MP3 LINK repeatedly until ‘AUX1
INPUT’ is displayed on the display panel.
• Before connect to power outlet, ensure that the
voltage selector (at the rear of this unit) is set to the
local power line voltage.
EN
15
English
This section describes how you can route the
sound from other devices to this DVD Home
Theatre unit in order to enjoy sound output or
audio play with multi-channel surround
capabilities.
Connect
Connect audio cables/other
devices
Connect radio antenna
Connect audio from cable box/
recorder/game console
Connect to digital socket
You can choose to connect to analogue or
digital socket depending on the device
capabilities.
COAXIAL
DIGITAL IN
Connect to analogue sockets
1
Connect a coaxial cable (not supplied)
from the DIGITAL IN-COAXIAL socket
on the subwoofer to the COAXIAL/
DIGITAL OUT socket on the device.
Note
• To listen to the audio output from this connection,
press AUX/DI /MP3 LINK repeatedly until ‘DIGITAL
INPUT’ is displayed on the display panel.
1
Connect an audio cable (not supplied)
from the AUDIO IN-AUX2 or AUX3
sockets on the subwoofer to the AUDIO
OUT sockets on the device.
Note
• To listen to the audio output from this connection,
press AUX/DI /MP3 LINK repeatedly until ‘AUX2
INPUT’ or ‘AUX3 INPUT’ is displayed on the display
panel.
16
EN
Mount the DVD Home
Theatre unit
English
Connect portable media player
Caution!
• Risk of personal injury and damage to the unit.
1
1
Connect a 3.5mm stereo audio cable (not
supplied) from the MP3 LINK socket on
this unit to the phone socket on your
portable media player (such as MP3 player).
2
Connect
Allow only qualified persons to mount the unit.
MP3
Ensure all the required cables are
connected to this unit and close the rear
cover.
Attach the supplied knobs to the rear of
this unit.
Note
• To listen to the audio output from this connection,
press AUX/DI /MP3 LINK repeatedly until ‘MP3
LINK’ is displayed on the display panel.
Connect USB device
3
1
Connect the USB device to
socket on this unit.
(USB)
4
Turn this unit over so that its bottom faces
up.
Hold this unit firmly while removing the
rubber feet by pushing it towards the back
of this unit. Repeat the step to remove the
other rubber feet.
Note
• This unit can only play/view MP3, WMA, DivX
(Ultra) or JPEG files that are stored on such devices.
• To listen to the audio output from this connection,
press USB.
EN
17
7
5
Position the supplied bracket on the wall,
drill the screw holes and insert the rubber
wall plugs (not supplied) into the holes.
Tips
• To mount this DVD Home Theatre unit below your
TV, leave at least 10cm (4 inches) of space between
the TV and the bracket.
6
18
Secure the bracket onto the wall with
screws (not supplied).
EN
Hook the DVD Home Theatre unit firmly
onto the mounted bracket. Slide the
knobs through the key holes and lock into
position.
1
Prepare the remote control
2
English
Control a play source
Select the source you wish to control by
pressing the DISC, USB, RADIO or
AUX/DI/MP3 LINK button.
Then select the desired function (for
example í, ë).
Get started
4 Get started
Navigate through the menu
1
1
2
3
Point the remote control directly at the
remote sensor on this unit and select the
desired function.
Push to open the battery compartment
cover.
Insert two batteries type R03 or AAA.
Match the indications (+-) inside the
battery compartment.
2
Use the following buttons on the remote
control to navigate through the on-screen
menus.
Close the cover.
Button
Note
• If you are not going to use the remote control for a
long time, remove the batteries.
vV
Action
Move up or down.
bB
Move left or right.
Confirm a selection.
Enter numbers.
EN
19
Find the correct viewing
channel
Note
• Before you start, remove the door stop tag on top of
Start Ambisound setup
When you turn on this unit for the first time,
follow the instructions on the TV to complete
the Ambisound setup in order to obtain the
best possible surround sound effect.
the disc compartment door.
Note
1
2
3
Press 2 to turn on the DVD Home
Theatre unit.
Press DISC to switch to disc mode
Turn on the TV and switch it to the
correct video-in channel.
• You may go to the lowest channel on
your TV, then press the Channel Down
button on your TVs remote control
until you see the Video In channel.
• You may press ° button repeatedly
on your TVs remote control.
• Usually this channel is between the
lowest and highest channels and may
be called FRONT, A/V IN, VIDEO, etc..
• Before you start, ensure that you have made all the
required connections.
• Complete the Ambisound setup for this unit before
you insert a disc to play.
1
2
Press DISC to switch to disc mode
Turn on the TV and switch it to the
correct video-in channel.
Language menu is displayed.
OSD Language
Please choose your language:
English
Melayu
Русский
Tips
• See the TVs user manual on how to select the
Stop: Exit
correct input on your TV.
3
4
20
EN
Change
Select
Select a language for on-screen display,
then press B.
A welcome message is displayed.
• To skip the Ambisound setup, press x
to exit.
Press B to continue.
A message on the unit orientation is
displayed.
8
Room Acoustics
Please select the type of walls that surround
your room:
Select the height of which the DVD Home
Theatre unit (SoundBar) is placed, then
press B.
[ Listening Position ] menu is displayed.
Listening Position
Select the distance between your listening position
and the SoundBar system:
Hard (Concrete, wood)
Soft (Curtains, open space)
Near (> 2m / 78in )
Default (2-3m / 78-118in)
Far (< 3m / 118in)
Back
6
Change
Select
Select the condition of the room, then
press B.
[ Room Placement ] menu is displayed.
Back
9
Change
Select
Select the distance between the listening
position and the speakers, then press B.
10 The speaker setting is complete, press B to
Room Placement
exit.
Select the Sound Bar system placement position
in your room:
This DVD Home Theatre unit is now ready for
use.
Middle of room
Corner of room
Near the right wall
Near the left wall
Back
7
Tips
Change
Select
Select the DVD Home Theatre unit
(SoundBar) placement in the room, then
press B.
[ Height ] menu is displayed.
• To change the menu display language, see chapter
•
‘Adjusting settings’ - [ General setup ] > [ OSD
Language ] for details.
If you connect this unit to a HDMI CEC compliant
TV using a HDMI cable, it switches automatically to
the menu display language as per your TV setting.
Height
Select the height at which your SoundBar system
is placed:
High (> 1.2m / 47in)
Default (0.8-1.2m / 32-47in)
Low (< 0.8m / 32in )
Back
Change
English
Press B to continue.
[ Room Acoustics ] menu is displayed.
Get started
5
Select
EN
21
Turn on Progressive Scan
If you connect this unit to TV with the
component video connection (see chapter
‘Connect video cables - Option 2: Connect to
component video jack’ for details), you can turn
on the progressive scan output if your TV
supports progressive scan.
1
2
3
4
Turn on the TV to the correct viewing
channel for this unit.
Press DISC.
Press OPTIONS.
Press V to select
[ Video Setup ] in the
menu, then press B.
Video Setup
TV Type
On
TV Display
Off
Picture Settings
HDMI Setup
Closed Caption
Progressive
5
6
Select [ Progressive ] > [ On ], then press
OK.
A warning message is displayed.
To proceed, select [ OK ] in the menu
and press OK.
The progressive setup is complete.
Note
• If a blank/distorted screen is displayed, wait for 15
seconds for the auto recover.
• If no picture displayed, turn off the progressive scan
mode as follows:
1) Press Z to open the disc compartment.
2) Press B.
3) Press SUBTITLE.
22
EN
7
8
To exit the menu, press OPTIONS.
You can now turn on the progressive scan
mode on your TV (see the TV user
manual).
Note
• There are some progressive scan TVs that are
not fully compatible with this unit, resulting in an
unnatural picture when playing back a DVD VIDEO
disc in the progressive scan mode. In such case, turn
off the progressive scan feature on this unit and your
TV.
Activate EasyLink control
1
2
Turn on the HDMI CEC operations on
your TV and other connected devices. See
TVs/devices manual for details.
You can now enjoy the EasyLink controls.
One touch play [ Auto Wake-up TV ]
When you press PLAY button, this unit will
wake- up from standby mode and start
disc play (if a video disc is found in the disc
compartment) and it will also turn on your
TV and switch to the correct viewing
channel.
One touch power off [ System Standby ]
When you press and hold STANDBY
button, it will turn off this unit and all the
linked devices to standby.
This unit also responses to standby
command from other HDMI CEC devices.
One touch audio input switching [ System
Audio Control ]
This unit is able to render the audio signals
from the active source. It switches
automatically to the corresponding audio
input and output the sound from its
speaker system.
• Before you can enjoy this function, you
have to map the audio inputs to the
connected devices.
• You can use any HDMI CEC TV/device
remote control to adjust the volume.
be placed in the disc compartment before operation.
• Philips does not guarantee 100% interoperability
English
• To enable one touch play function, a video disc must
with all HDMI CEC compliant devices.
Get started
This feature is only applicable if this unit is
connected to HDMI CEC compliant TV/device.
It enables all the linked devices response or
react to certain commands simultaneously with
one touch control.
Note
Map the audio inputs to the
connected devices
Note
• Before you start, ensure that an audio connection
has been made between this unit and your TV/
devices.
1
2
3
4
Press DISC.
Press OPTIONS.
[ General Setup ] menu is displayed.
Press B.
Select [ EasyLink ], then press B.
General Setup
EasyLink
Auto Wake-up TV
Disc Lock
System Standby
Display Dim
System Audio Control
OSD Language
Audio Input Mapping
Screen Saver
Sleep Timer
Standby Mode
DivX(R) VOD Code
• [ Auto Wake-up TV ] and [ System
Standby ] functions are turned on by
default in the factory.
5
6
Select [ System Audio Control ] > [ On ],
then press OK.
Select [ Audio Input Mapping ], then press
OK.
EN
23
7
Select [ OK ] in the menu, then press OK
to start scanning of devices.
Once complete, audio input mapping
menu is displayed.
Select a play source
On the main unit
Audio Input Mapping
AUX1 Input
TV
AUX2 Input
Other (non-HDMI)
AUX3 Input
Digital Input
1
• For example, if your TV audio is
connected to the AUX IN-AUX 1
sockets on this unit, select [ AUX1
Input ] and map with the TV (brand
name) at the right panel.
8
9
On the remote control
Select the audio input of this unit that is
used to connect to other HDMI device
(e.g. AUX1 Input, AUX2 Input), then press
B.
Select the correct device that connected
to this audio input, then press OK.
• Repeat steps 8~9 to map other
connected devices.
10 To exit the menu, press OPTIONS.
24
Press SOURCE button repeatedly to
select: DISC > USB > RADIO FM >
RADIO AM/MW > DIGITAL INPUT >
AUX1 INPUT > AUX2 INPUT > AUX3
INPUT > MP3 LINK > DISC ...
EN
• Press DISC to switch to DISC mode.
• Press USB to switch to USB mode.
• Press RADIO to switch to FM or AM/MW
band.
• Press AUX/DI /MP3 LINK repeatedly to
select other external devices.
Display
Device connected to
AUX1 INPUT
AUDIO IN-AUX1 sockets.
AUX2 INPUT
AUDIO IN-AUX2 sockets.
AUX3 INPUT
AUDIO IN-AUX3 sockets.
DIGITAL
INPUT
DIGITAL IN-COAXIAL
socket.
MP3 LINK
MP3 LINK socket.
5 Play
Note
•
restrictions. Ensure that the DVD video you play is
for the same region zone as your player (indicated
on its rear).
This unit can support playback of the following file
formats: MP3/WMA/JPEG/DivX.
Play
Play from disc
English
• DVDs and DVD players are designed with regional
Play a disc
Playable discs
DVD Video
• Region 3 (Asia Pacific,
Taiwan, Korea)
• Region 4 (Australia, New
Zealand)
• Region 6 (China)
• Region 5 (India)
DVD±RW
(DVD Rewritable)
DVD±R
(DVD Recordable)
Caution!
• Never place any objects other than discs into the
disc compartment.
• Never touch the disc optical lens inside the disc
compartment.
1
2
3
DVD+R DL (DVD+R Double
Layer)
CD-RW (CD-Rewritable)
4
ReWritable
Press Z to open the disc compartment.
Insert a disc with its label facing up.
• For double-sided disc, load the side to
play faces up.
Press Z to close the disc compartment
and start disc play.
• To view disc play, turn on the TV to
the correct viewing channel for this
DVD Home Theatre unit.
To stop disc play, press x.
Tips
CD-R (CD-Recordable)
• If the password entry menu is displayed, you have to
enter the 6-digit password before it can be played.
Recordable
• Screen saver displays automatically if the disc play
Audio CD (Compact Disc
Digital Audio)
Video CD
• Formats 1.0, 1.1, 2.0
•
is stopped for about 15 minutes. To wake up from
screen saver, press DISC.
This unit automatically switches to standby mode if
you do not press any buttons within 30 minutes after
a disc has stopped playing.
Super Video CD
EN
25
Play video
Change video play
Note
• For video disc, playback always resumes from the
point where it was last stopped. To start playback
from the beginning, press í while the message is
displayed.
Control a title
1
2
Play a title.
Use the remote control to control the title.
Button
Action
Pause/ resume play.
Stop play.
Jump to the next title/chapter.
Return to the beginning of the
current title/chapter or jump to
the previous title/chapter.
m M
Slow motion reverse/ forward
play.
• To change play speed, press
this button repeatedly.
• For VCD, only forward play
is possible.
vV
26
Search backward/ forward.
• To change search speed,
press this button repeatedly.
EN
1
2
Play a title.
Use the remote control to change the
video play.
Button
Action
Change audio language.
• Only applicable to discs
with multiple audio
language or channel.
Change subtitle language.
• Only applicable to discs
with multiple subtitle
language.
Toggle through various repeat/
shuffle play mode; or turn off
repeat mode.
• Repeat options vary
depending on the disc type.
• For VCDs, repeat play is
only possible when the PBC
mode is turned off.
Zoom in/out.
• To pan through the zoomed
image, press the cursor
buttons.
Display current play status.
• You can change the video
play options here without
interrupting disc play.
View DVD play from different
camera angles.
• Only applicable to DVDs
that contain sequences
recorded from different
camera angles.
Sync audio output with video play
Play
If the video play is slower than the audio output
(sound does not match with the pictures), you
can delay the audio output to match the video.
English
Access DVD menu
1
2
Press DISC to access disc main menu.
Select a play option, then press OK.
• In some menus, press number buttons
to input your selection.
• To return to the title menu during
playback, press TITLE.
Access VCD menu
The PBC (Playback Control) for VCD is turned
on by default in the factory. When you load in
a VCD, the contents menu is displayed.
1
1
2
Press and hold AUDIO SYNC until
‘AUDIO SYNC XXX’ is displayed.
• ‘XXX’ denotes the delay time.
Within five seconds, press VOL +- to
set the delay time for audio output.
Note
• If the volume control is not used within 5 seconds, it
resumes normal volume control function.
Press vV to select a play option, then
press OK to start play.
• If PBC is off, it skips the menu and starts
play from the first title.
• During playback, you can press BACK
to return to the menu (if the PBC
mode is on).
Tips
• The default setting for PBC is on. To change the
default setting, see chapter ‘Adjust settings’ [ Preference Setup ] > [ PBC ] for details.
EN
27
Quick skip play to a specific time
Play DivX® video
DivX video is a digital media format that retains
high quality despite a high rate of compression.
This unit is DivX® Certified that allows you to
enjoy DivX video.
1
1
2
3
During playback, press INFO.
The disc status menu is displayed.
Select the current elapsed playing time in
the menu, then press OK.
• [ TT Time ] (title time)
• [ CH Time ] (chapter time)
• [ Disc Time ] (disc time)
• [ Track Time ] (track time)
2
3
4
Insert a disc or USB that contains the DivX
videos.
Press DISC or USB.
A contents menu is displayed.
Select a title to play, then press u.
Use the remote control to control the
title.
Button
Press the number buttons to change the
time where you want to skip to, then press
OK.
Action
Change subtitle language.
Change audio language/track.
Stop play.
• For DivX Ultra video, press
this button again to display
the contents menu.
Display DivX Ultra video
information.
Note
• Only those DivX videos that were rented or
•
•
•
28
EN
purchased using the DivX registration code of this
unit can be played (see chapter ‘Adjust settings’ >
[ General Setup ] > [ DivX(R) VOD Code ] for
details).
If the subtitle does not appear correctly, change the
subtitle language (see chapter ‘Adjust settings’ [ Preference Setup ] > [ DivX Subtitle ] for details).
The subtitle can only be displayed up to an average
of 45 characters.
This unit can play DivX video files that are up to 4GB
in size.
Play music
• For some commercial audio disc, playback may
resume from the point where it was last stopped. To
start playback from first track, press í.
1
2
Control a track
1
2
Play a track.
3
4
Use the remote control to control the
track.
Button
Action
Pause/ resume play.
Insert a disc or USB that contains the MP3/
WMA music.
Press DISC or USB.
A contents menu is displayed.
Select a folder, then press OK.
Select a track to play, then press u.
• To return to the main menu, press v
until ‘Previous’ folder is selected, then
press OK.
Note
• For CDs recorded in multiple sessions, only the first
session is played.
Stop play.
• This unit does not support MP3PRO audio format.
• If any special characters are present in the MP3 track
Jump to the next track.
•
Return to the beginning of the
current track or jump to the
previous track.
Direct input the track number.
•
name (ID3) or album name, it might not be displayed
correctly on the screen because these characters are
not supported.
Some WMA is protected by Digital Rights
Management (DRM), it cannot be played on this unit.
Folders/files exceed the supported file limit of this
unit will not be displayed or played.
Tips
• To display the data disc contents without folders, see
m M
Search backward/ forward.
• To change search speed,
press this button repeatedly.
chapter ‘Adjust settings’ - [ Preference Setup ] >
[ MP3/JPEG Nav ] for details.
Toggle through various repeat/
shuffle play mode; or turn off
repeat mode.
• Repeat options vary
depending on the disc type.
EN
29
Play
MP3/WMA is a type of highly compressed
audio file (files with .mp3 or .wma extensions).
Note
English
Play MP3/WMA music
Play photo
Note
• It may require longer time to display the disc
Play photos as slideshow
This unit can play JPEG photos (files with .jpeg
or .jpg extensions).
1
2
3
Insert a disc or USB that contains the JPEG
photos.
Press DISC or USB.
For a Kodak disc, the slideshow begins
automatically.
For a JPEG disc, the photo menu is
displayed.
Select the folder/album you want to play.
• To preview the photos in the folder/
album, press INFO.
• To go to previous or next screen
display, press í / ë.
• To select a photo, press the cursor
buttons.
• To display the selected photo only,
press OK.
4
30
Press u to start slideshow play.
• To return to the menu, press BACK.
EN
•
•
•
contents on the TV due to the large number of
songs/photos compiled onto one disc.
If the JPEG photo is not recorded with an ‘exif ’
type file, the actual thumbnail picture will not be
shown on the display. It will be replaced with a ‘blue
mountain’ thumbnail picture.
This unit can only display digital camera pictures
according to the JPEG-EXIF format, typically used by
almost all digital cameras. It cannot display Motion
JPEG and pictures in formats other than JPEG, or
sound clips associated with pictures.
Folders/files exceed the supported file limit of this
unit will not be displayed or played.
Control photo play
1
2
Play photo slideshow.
Use the remote control to control the
photo.
Button
Action
b
Skip to the previous photo.
B
Skip to the next photo.
v
Rotate the photo clockwise.
V
Rotate the photo anticlockwise.
Zoom in/ out.
• Play will pause while in
zoom mode.
Stop play.
Play MP3/WMA music files and JPEG photo
files simultaneously to create musical slideshow.
The MP3/WMA and JPEG files must be stored
on the same disc or USB device.
This unit can only play/view MP3, WMA, DivX
(Ultra) or JPEG files that are stored on such
devices.
1
2
3
4
Play MP3/WMA music.
Navigate to the photo folder/album and
press u to start slideshow play.
Slideshow begins and continues till the
end of the photo folder or album.
Audio continues to play till the end of
the disc.
• To return to the menu, press BACK.
English
Play from USB device
Play
Play musical slideshow
1
To stop slideshow play, press x.
To stop music play, press x again.
2
3
4
Connect a digital camera that comply with
the PTP standard, USB flash drive, or USB
memory card reader to the
(USB)
socket on this unit.
Press USB.
A contents menu is displayed.
Select a file to play, then press u.
• For more information, see chapters
‘Play music, Play photo, Play video’ for
details.
To stop play, press x or remove the USB
device.
Tips
• If the device does not fi t into the USB socket,
connect it through a USB extension cable.
• If a multiple USB card reader is used, only one of the
connected USB drive contents can be accessed.
• If a USB HDD is used, ensure that an auxiliary
•
power cord connected to the USB HDD for proper
operations.
Digital cameras that use PTP protocol or require
additional programme installation when connected
to a PC are not supported.
EN
31
Play from portable media
player
Simply connect your portable media player (e.g.
MP3 player) to this unit to enjoy superb sound
quality from your music collections.
MP3 LINK
1
2
3
4
Play from radio
Check if the FM antenna has been connected
to the subwoofer. If not, connect the supplied
FM antenna to the FM 75Ω socket and fix its
ends to the wall.
MP3
Connect a 3.5mm stereo audio cable (not
supplied) from the MP3 LINK socket on
this unit to the ‘headphone’ socket on your
portable media player.
Press AUX/DI /MP3 LINK repeatedly until
‘MP3 LINK’ is displayed.
Start play on your portable media player.
• See chapter ‘Adjust Sound’ to enhance
the audio output.
To stop play, press STOP button on your
portable media player.
Note
• For China/Latin America region only, if you want to
receive AM/MW radio band, connect the AM loop
antenna (supplied) to the AM/MW sockets on this
DVD Home Theatre unit.
Tips
• For better FM stereo reception, connect an external
FM antenna (not supplied).
• Position the antenna as far away as possible from
Note
• Control playback is only possible on your portable
media player.
• Stop play on the portable media player before you
switch to other play media/source.
32
EN
your TV, VCR or other radiation source to prevent
unwanted interference.
Listen to radio
The first time when you access ‘RADIO’ mode,
follow the instructions to install the radio
stations.
1
2
Press RADIO.
’AUTO INSTALL ... PRESS PLAY’ is
displayed.
Press u.
All detected radio stations are stored.
Once complete, it tunes to the first
preset radio station.
• To stop auto tuning, press x.
2
Use the remote control to control the
radio.
Button
Play
1
Press RADIO repeatedly to select ‘FM’ or
‘AM/MW’ band.
Action
Select a preset radio station.
m M
Tune the radio frequency
backward/ forward.
Toggle between FM stereo
and FM mono mode.
Press and hold this button to
delete the preset station from
the preset list.
• The preset number for
other radio stations
remain unchanged
Note
• This unit can store up to a maximum of 40 FM radio
stations (20 radio stations for AM/MW band).
• If auto installation is not activated or less than 5
radio stations are stored, ‘AUTO INSTALL’ will be
displayed again the next time you turn on to radio
mode.
Reinstall all the radio stations
1
2
Press RADIO repeatedly to select ‘FM’ or
‘AM/MW’ band.
Press and hold PROGRAM until
‘STARTING INSTALL’ is displayed.
All previously stored radio stations will
be replaced.
Note
• If no stereo signal is detected or less than 5 stations
are detected during radio installation, ‘CHECK
ANTENNA’ is displayed.
EN
English
First time tuning
33
Search and store radio stations
individually
1
2
3
4
5
6
Press RADIO repeatedly to select ‘FM’ or
‘AM/MW’ band.
Press m M.
The radio frequency indication starts to
change until a radio station is detected.
Repeat step 2 until you tune to the radio
station you wish to store.
• To finetune the radio frequency, press
vV.
Press PROGRAM.
• If no action is carried out within 20
seconds after the above step, it exits
the preset mode.
Press í ë (or the number buttons) to
select a preset number to store.
Press PROGRAM to confirm.
Change tuning grid
In some countries, the frequency step between
adjacent channels in FM band is 50 kHz or
100 kHz (AM/MW band is 9 kHz or 10 kHz).
Note
• This feature only applicable for certain region.
• Change tuning grid erases all preset radio stations.
1
2
3
34
Press RADIO repeatedly to select ‘FM’ or
‘AM/MW’ band.
Press x.
Press and hold u until ‘GRID 9’ or
‘GRID 10’ is displayed.
• ‘GRID 9’ for FM 50 kHz (or AM 9 kHz)
and ‘GRID 10’ for FM 100 kHz (or AM
10 kHz).
EN
Select Ambisound
English
6 Adjust sound
1
Press VOL +- to increase or decrease
the volume level.
• To mute the volume, press H.
• To restore the volume, press H again
or press the volume button.
Adjust Bass/Treble
1
2
1
Adjust sound
Control the volume
Press AMBISOUND repeatedly to select a
best Ambisound output that most suits the
video or music you play.
Options
Descriptions
AUTO
The surround output will be
selected based on the audio
stream of the played content.
MULTICHANNEL
Multi-channel surround sound.
STEREO
Stereo sound.
Press BASS / TREBLE.
Press VOL +-repeatedly to set the
level for low (BASS) or high (TREBLE)
tone.
Note
• If the volume control is not used within 10 seconds, it
resumes normal volume control function.
EN
35
Select a preset sound effect
1
Press SOUND repeatedly to select a
sound effect that most suits the video or
music you play.
Video /
Music /
Descriptions
ACTION /
ROCK /
Enhanced low and high
range for great sounding
movie effects and
atmosphere. Great for
action movies and rock/pop
music.
DRAMA /
JAZZ
Clear mid and high range.
Recreates the atmosphere
of a live club with the artist
just in front of you. Good
for Jazz music and watching
dramas.
CONCERT /
CLASSIC
Flat and pure sound mode.
Ideal for listening to classical
music and watching live
concert DVDs.
GAMING /
PARTY
Slightly enhanced low range
and strong mid range ideal
for party music and video
gaming.
SPORTS
Moderate mid range and
surround effects for clear
vocals and the atmosphere
of a live sports venue.
NEWS
Enhanced mid range for
clear vocals/speech.
36
EN
Symbol
Options
This feature is only applicable if this unit is
connected to HDMI CEC compliant TV/
device. It enables all the linked devices
response or react to certain commands
simultaneously with one touch control.
[ General Setup ]
Options
Descriptions
[ Audio Setup ]
[ Auto Wakeup TV ]
It wake-ups your TV
automatically when you
press PLAY to power up
this unit and start disc
play (if a video disc is
found in the disc
compartment).
• To disable this feature,
select [ Off ].
[ System
Standby ]
Respond to standby
command from other
HDMI CEC compliant
TV/devices.
• To disable this feature,
select [ Decline ].
[ Video Setup ]
[ Preference Setup ]
General setup
1
2
3
Press OPTIONS.
[ General Setup ] menu is displayed.
Press B.
Select an option, then press OK.
General Setup
EasyLink
Disc Lock
Display Dim
OSD Language
Screen Saver
Sleep Timer
Standby Mode
DivX(R) VOD Code
[ System Audio It enables this DVD
Control ]
Home Theatre unit to
switch automatically to
the audio input of the
active device.
• To enable this feature,
select [ On ]. Then
proceed to [ Audio
Input Mapping ] to
scan and map all the
connected devices.
• See the explanations of the above
options in the following pages.
4
Select a setting, then press OK.
• To return to the previous menu, press
BACK.
• To exit the menu, press OPTIONS.
EN
37
English
This section describes the various setting
options of this unit.
[ EasyLink ]
Adjust settings
7 Adjust settings
[ Audio Input
Mapping ]
Map the audio input to
the connected TV/
devices correctly to
enable automatic
switching of input source.
1. Press OK to start
scanning of devices.
2. Select the audio input
to map (e.g. AUX1
Input, AUX2 Input),
then press B.
3. Select the correct
device that connected
to this audio input,
then press OK.
Note
• Your TV and other connected devices must be
compliant with HDMI CEC.
• You must turn on the HDMI CEC operations on
•
your TV/devices before you can enjoy the EasyLink
controls. See your TVs/devices manual for details.
Philips does not guarantee 100% interoperability
with all HDMI CEC compliant devices.
[ Disc Lock ]
Set play restriction for a specific discs.
Before you start, place the disc in the disc
compartment (maximum 40 discs can be
locked).
• [ Lock ] – restrict access to the current
disc. The next time you want to play
this disc or unlock it, you need to enter
the password.
• [ Unlock ] – all discs can be played.
Tips
• To set or change your password, go to
[ Preference Setup ] > [ Password ].
38
EN
[ Display Dim ]
Change the brightness level of the display
panel to suit the lighting in your room.
• [ 100% ] – normal brightness.
• [ 70% ] – medium brightness.
• [ 40% ] – dimmest display. The LEDs
and display icons will not be shown.
[ OSD Language ]
Select the default on-screen menu
language.
[ Screen Saver ]
Turn off or on the screen saver mode. It
helps to protect the TV screen from being
damage due to over exposure to a static
image for too long.
• [ On ] – set the screen saver to appear
after 15 minutes of inactivity (for
example, in pause or stop mode).
• [ Off ] – disable screen saver mode.
[ Sleep Timer ]
Switch to standby automatically after the
preset time.
• [ Off ] – disable sleep mode.
• [ 15, 30, 45, 60 mins ] – select the
count down time before it switches to
standby.
[ Standby Mode ]
Set the standby mode.
• [ Normal ] – normal standby power
consumption.
• [ Low Power ] – low standby power
consumption. However, it requires
longer time to power up.
Tips
• Enter this unit’s DivX registration code when you
rent or purchase video from www.divx.com/vod.
The DivX videos rented or purchased through the
DivX® VOD (Video On Demand) service can be
played only on the device to which it is registered.
Audio setup
1
2
3
English
Display the DivX® registration code.
Press OPTIONS.
[ General Setup ] menu is displayed.
[ Audio Setup ], then
Press V to select
press B.
Adjust settings
[ DivX(R) VOD Code ]
Select an option, then press OK.
Audio Setup
Ambisound Setup
HDMI Audio
Night Mode
4
Select a setting, then press OK.
• To return to the previous menu, press
BACK.
• To exit the menu, press OPTIONS.
[ Ambisound Setup ]
Change the Ambisound setup.
Options
Descriptions
[ Setup
Guide ]
Select this if you want to
go through the complete
Ambisound settings.
[ Room
Acoustics ]
Select the type of walls
that surround your room.
[ Room
Placement ]
Select this unit placement
in the room.
[Height ]
Select the height at which
this unit is placed.
[ Listening
Position ]
Select the distance
between your listening
position and this unit.
EN
39
Tips
• See chapter ‘Get Started - Start Ambisound setup’
Video setup
for detailed information.
1
[ HDMI Audio ]
2
When you connect this unit and TV with
HDMI cable, select the audio output
setting for this connection.
• [ On ] – the sound is output through
both your TV and this speaker system.
If the audio format on the disc is not
supported, it will be downmixed to
two-channel sound (linear-PCM).
• [ Off ] – disable audio output from
your TV. The sound is only output
through this speaker system.
3
Press OPTIONS.
[ General Setup ] menu is displayed.
Press V to select
press B.
[ Video Setup ], then
Select an option, then press OK.
Video Setup
TV Type
TV Display
Picture Settings
HDMI Setup
Closed Caption
Progressive
[ Night Mode ]
Make loud sound level softer and soft
sound level louder so that you can watch
the DVD movies at a low volume, without
disturbing others.
• [ On ] – for quiet viewing at night
(DVDs only).
• [ Off ] – enjoy surround sound with a
full dynamic range.
40
EN
• See the explanations of the above
options in the following pages.
4
Select a setting, then press OK.
• To return to the previous menu, press
BACK.
• To exit the menu, press OPTIONS.
[ HDMI Setup ]
Change this setting only if the video does
not appear correctly. By default, this
setting matches the most common setting
for TVs in your country.
• [ PAL ] – for PAL-system TV.
• [ NTSC ] – for NTSC-system TV.
• [ Multi ] – for TV that is compatible
with both PAL and NTSC.
When you connect this unit and TV with
HDMI cable, select the best HDMI setup
that your TV can support.
Options
Descriptions
[ Superwide ]
Centre position of the
screen is stretched less
than the side. This
setting is only applicable
if the video resolution is
set to 720p or 1080i/p.
[ 4:3 Pillar
Box ]
No stretching of the
picture. Black bars are
displayed on both sides
of the screen.
[ Off ]
Picture will be displayed
according to the format
of the disc.
Select the screen format according to how
you want the picture to appear on your
TV.
4:3 Letter Box (LB)
16:9 (Wide Screen)
• [ 4:3 Pan Scan ] – for standard TV, a
full-height screen display with the sides
trimmed.
• [ 4:3 Letter Box ] – for standard TV, a
‘wide-screen’ display with black bars on
the top and bottom.
• [ 16:9 Wide Screen ] – for wide-screen
TV (frame ratio 16:9).
[ Picture Settings ]
Select a predefined set of picture colour
settings or customise your personal setting.
• [ Standard ] – original colour setting.
• [ Bright ] – vibrant colour setting.
• [ Soft ] – warm colour setting.
• [ Personal ] – customise the colour
setting. Set the level of brightness,
contrast, tint and colour saturation in
the menu, then press OK.
Note
• This setting is only available if you have set the [ TV
Display ] setting to [ 16:9 Wide Screen ].
• [ HDMI Video ] – select a video
resolution that is compatible with your
TV display capability.
Options
Descriptions
[ Auto ]
It detects and selects the
best supported video
resolution automatically.
[ 480p, 576p,
720p, 1080i,
1080p ]
Select a video resolution
that best supported by
your TV. See your TVs
manual for details.
EN
41
Adjust settings
• [ Wide Screen Format ] – define the
wide screen format for disc play.
[ TV Display ]
4:3 Pan Scan (PS)
English
[ TV Type ]
Note
• If the setting is not compatible with your TV, a
blank screen appears. Wait for 15 seconds for auto
recover or press HDMI repeatedly until the picture
appears.
[ Closed Caption ]
Turn on or off display captions.
• [ On ] – show the sound effects in
subtitle. Only applicable to disc with
Closed Caption information included
and your TV supports this feature.
• [ Off ] – disable closed caption.
Preference Setup
1
2
3
Tips
• See chapter ‘Get Started - Turn on Progressive Scan’
for detailed information.
42
EN
Press V to select
then press B.
[ Preference Setup ],
Select an option, then press OK.
Preference Setup
Audio
Subtitle
Disc Menu
[ Progressive ]
If your TV can support progressive signals,
you can activate the progressive scan
mode of this unit.
• [ On ] – turn on progressive scan
mode.
• [ Off ] – disable progressive scan mode.
Press OPTIONS.
[ General Setup ] menu is displayed.
Parental
PBC
MP3/JPEG Nav
Password
DivX Subtitle
• See the explanations of the above
options in the following pages.
4
Select a setting, then press OK.
• To return to the previous menu, press
BACK.
• To exit the menu, press OPTIONS.
For VCDs/SVCDs recorded with PBC
(playback control,) you can access the disc
contents through an interactive menu.
• [ On ] – an index menu is displayed
when you load a disc for play.
• [ Off ] – skip the menu and start play
from the first title.
[ Subtitle ]
Select the default subtitle language for
DVDs.
[ Disc Menu ]
Select the menu language for DVDs.
Note
• If the language you have set is not available on the
disc, the disc uses its own default language.
• For some DVDs, the subtitle/audio language can only
be changed from the disc menu.
• To select the languages that are not listed in the
menu, select [ Others ]. Then check the Language
Code list at the back of this user manual and enter
the respective 4-digit language code.
[ Parental ]
Restrict access to DVDs that are unsuitable
for your children. These types of DVDs
must be recorded with ratings.
1. To start, press OK.
2. Select a rating level in the menu, then
press OK.
3. Press the number buttons to enter
your 6-digit password.
Note
• Rated DVDs above the level you set in [ Parental ]
require a password to be played.
• The ratings are country-dependent. To allow all discs
to play, select ‘8’.
• Some DVDs have ratings printed on them but are
[ MP3/JPEG Nav ]
Turn off or on MP3/WMA folder display
when you play a media that contains MP3/
WMA files.
• [ Without Menu ] – display all the files.
• [ With Menu ] – display the folders of
MP3/WMA files.
[ Password ]
Follow the instructions on the TV to set or
change the password for locked discs and
play restricted DVDs.
Change Password
Old Password
New Password
Confirm PWD
OK
1. Press the number buttons to enter
‘136900’ or your last set 6-digit
password at [ Old Password ] field.
2. Enter the new password at [ New
Password ] field.
3. Enter the new password again at
[ Confirm PWD ] field.
4. Press OK to exit the menu.
not recorded with ratings. This function has no
effect on such DVDs.
Note
Tips
• If you forget your 6-digit password, enter ‘136900’
before you set a new password.
• To set or change your password, go to
[ Preference Setup ] > [ Password ].
EN
43
English
[ PBC ]
Select the default audio language for
DVDs.
Adjust settings
[ Audio ]
[ DivX Subtitle ]
Select a character set that supports the
DivX subtitle.
[ Standard ]
English
[ Chinese ]
Simplified Chinese
[ Korean ]
Korean
Note
• Ensure that the subtitle file has the exact same file
name as the movie file. If for example the filename of
the movie is ‘Movie.avi’, then you will need to name
the text file ‘Movie.sub’ or ‘Movie.srt’.
[ Version Info ]
Display the software version of this unit.
Tips
• This information is required when you want to find
out if a newest software version is available at the
Philips website that you may download and install on
this unit.
[ Default ]
Reset all the settings of this unit to factory
default, except for [ Disc Lock ],
[ Password ] and [ Parental ] settings
remain unchanged.
44
EN
6
Insert the CD-R or USB flash drive to this
unit.
7
Press DISC or USB, then follow the
instruction on the TV to confirm update
operation.
English
8 Additional
information
Update software
Philips provides software updates to ensure that
this unit is compatible with the newest formats.
To check for updates, compare the current
software version of this unit with the latest
software version available at the Philips website.
1
Additional information
Note
• Do not remove the CD-R or USB when software
updating is in progress.
8
Once software update is complete, this
unit turns off to standby automatically.
Note
• We recommend that you disconnect the power cord
Press OPTIONS, .
for a few seconds and connect again to reboot the
system.
Preference Setup
Disc Menu
Parental
Care
PBC
MP3/JPEG Nav
Caution!
Password
DivX Subtitle
Version Info
• Never use solvents such as benzene, thinner,
cleaners available commercially, or anti-static sprays
intended for discs.
Default
2
3
4
5
Select [ Preference Setup ] > [ Version
Info ], then press OK.
Write down the version number, then
press OPTIONS to exit the menu.
Go to www.philips.com/support to check
the latest software version available for this
unit.
If the latest software version is higher than
the software version of this unit, download
it and store onto a CD-R or USB flash
drive
Clean discs
Wipe the disc with a micro fibre cleaning cloth
from the centre to the edge in a straight line
movement.
Clean main unit screen
Wipe the screen surface with a micro fibre
cleaning cloth.
EN
45
Specifications
Note
• Specification and design are subject to change
without notice.
Accessories supplied
•
•
•
•
•
•
•
•
•
•
Quick Start Guide
Remote control and batteries
Composite video cable (yellow)
HDMI cable
Power cable (for certain region only)
Subwoofer
Wall mount bracket and 2 wall mounting knobs
FM wire antenna / AM-MW loop antenna
Round-to-Flat pin adaptor (for certain region only)
Micro fibre cleaning cloth
Radio
•
•
•
•
•
•
•
•
USB
•
•
Total output power (Home Theatre): 600W
Frequency response: 20 Hz - 20 kHz / ±3dB
Signal-to-noise ratio: > 65 dB (CCIR)
Input sensitivity
• AUX 1: 550 mV
• MP3 LINK: 320 mV
Disc
•
•
•
•
•
•
•
•
•
•
46
Laser Type: Semiconductor
Disc diameter: 12cm / 8cm
Video decording: MPEG1/ MPEG2 / DivX /
DivX Ultra
Video DAC: 12 bits, 148 MHz
Signal system: PAL / NTSC
Video S/N: 56 dB
Audio DAC: 24 bits / 192 kHz
Frequency response: 20 Hz - 20 kHz
PCM: IEC 60958
Dolby Digital, DTS: IEC60958, IEC61937
EN
Compatibility: Hi-Speed USB (2.0)
Class support: UMS (USB Mass Storage Class)
Power (Subwoofer)
•
•
•
Amplifier
•
•
•
•
Tuning range: FM 87.5-108 MHz (100 kHz),
AM/MW 531-1602 kHz (9 kHz)
AM/MW 530-1700 kHz (10 kHz)
26 dB quieting sensitivity: FM 22 dBf, AM 4μV/m
IF rejection ratio: FM 60 dB, AM 45 dB
Signal-to-noise ratio: FM 60 dB, AM 40 dB
Harmonic distortion: FM 3%, AM 3%
Frequency response: FM 180 Hz~9 kHz / ±6dB
Stereo separation: FM 26 dB (1 kHz)
Stereo Threshold: FM 23.5 dB
•
•
•
•
•
•
Power supply: 110-127V / 220-240V ~50-60 Hz
Power consumption: 150 W
Standby power consumption
• Normal: < 3 W
• Low standby: < 0.3 W
System: Bass Reflex System
Impedance: 4 ohm
Speaker drivers: 165 mm (6 1/2”) woofer
Frequency response: 30 Hz - 160 Hz
Dimensions (WxHxD): 295 x 440 x 295 (mm)
Weight: 10 kg
Main unit
•
•
•
•
Dimensions (WxHxD): 958 x 163 x 141 (mm)
Net Weight: 7 kg
Centre speaker:
• Speaker impedance: 8 ohm
• Speaker drivers: 2x 63.5mm woofer + 19mm
tweeter
• Frequency response: 190 Hz - 20 kHz
Left/Right surround speakers:
• Speaker impedance: 8 ohm
• Speaker drivers: 2x 63.5mm full range
• Frequency response: 190 Hz - 20 kHz
English
9 Troubleshooting
• Risk of electric shock. Never remove the casing of
this unit.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this unit, check the following
points before requesting service. If the problem remains unsolved,
register your product and get support at www.philips.com/welcome.
Main unit
The buttons on this unit do
not work.
• Disconnect this unit from the power outlet for a few minutes,
then connect again.
• Ensure that the interconnect cable from the subwoofer is
connected to the DVD Home Theatre unit.
Picture
No picture.
• Refer to your TVs manual for correct video input channel
selection. Change the TV channel until you see the DVD screen.
• Press DISC.
• If this happens when you turn on the progressive scan setting or
change the TV type setting, you have to switch to its default
mode:
1. Press Z to open the disc compartment.
2. Press B (for progressive scan) or b (for TV type).
3. Press SUBTITLE.
No picture on HDMI
connection.
• Check if the HDMI cable is faulty. Replace a new HDMI cable.
• If this happens when you change the HDMI video resolution,
press HDMI repeatedly until the picture appears.
EN
47
Troubleshooting
Warning!
Sound
No sound.
• Ensure that the audio cables are connected and press the
correct input source (for example, AUX/DI /MP3 LINK, USB) to
select the device you want to play.
No sound on HDMI
connection.
• You may not hear any sound from the HDMI output if the
connected device is non-HDCP compliant or only DVIcompatible.
• Ensure that the [ HDMI Audio ] setting is turned on.
No sound from TV
programmes.
• Connect an audio cable from the AUDIO input on this unit to
the AUDIO output on your TV. Then press AUX/DI /MP3
LINK repeatedly to select the corresponding audio input source.
Play
DivX video files cannot be
played.
• Ensure that the DivX file is encoded according to the ‘Home
Theatre Profile’ with the DivX encoder.
• Ensure that the DivX video file is complete.
The aspect ratio of the
screen is not aligned with
the TV display setting.
• The aspect ratio is fixed on the DVD.
DivX subtitle are not
displayed correctly.
• Ensure that the subtitle file name is the same as the movie file
name.
• Select the correct character set.
1. Press OPTIONS.
2. Press B, then select [ DivX Subtitle ] in the menu.
3. Select the character set that supports the subtitle.
The contents of the USB
flash drive cannot be read.
• The USB flash drive format is not compatible with this unit.
• Drive is formatted with different file system which is not
supported by this unit (e.g. NTFS).
• Maximum size of memory supported is 160GB.
48
EN
DivX
The DivX code is a patent-pending, MPEG-4
based video compression technology,
developed by DivX Networks, Inc., that can
shrink digital video to sizes small enough to be
transported over the internet, while maintaining
high visual quality.
Dolby Digital
A surround sound system developed by Dolby
Laboratories containing up to six channels of
digital audio (front left and right, surround left
and right, centre and subwoofer).
HDMI
High-Definition Multimedia Interface (HDMI) is
a high-speed digital interface that can transmit
uncompressed high definition video and digital
multichannel audio. It delivers high quality
picture and sound quality, completely free from
noise. HDMI is fully backward-compatible with
DVI.
As required by the HDMI standard, connecting
to HDMI or DVI products without HDCP
(High-bandwidth Digital Content Protection)
will result in no Video or Audio output.
HDCP
High-bandwidth Digital Content Protection is a
specification that provides a secure transmission
of digital contents between different devices (to
prevent unauthorised copyright).
MP3
A file format with a sound data compression
system. ‘MP3’ is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
Layer3. By using the MP3 format, one CD-R or
CD-RW can contain about 10 times more data
than a regular CD. Files are recognised by their
file extension ‘.MP3’.
MPEG
Motion Picture Experts Group. A collection of
compression systems for digital audio and
video.
PBC
Playback Control. A system of navigating a
Video CD/Super VCD through on-screen
menus recorded onto the disc. You can enjoy
interactive playback and searching.
PCM
Pulse Code Modulation. A digital audio
encoding system.
Progressive Scan
The progressive scan displays twice the number
of frames per seconds than ordinary TV system.
It offers higher picture resolution and quality.
WMA
Windows Media™ Audio. Refers to an audio
compression technology developed by
Microsoft Corporation. WMA data can be
encoded by using Windows Media Player
version 9 or Windows Media Player for
Windows XP. Files are recognised by their file
extension ‘WMA’.
EN
49
English
Aspect ratio
Aspect ratio refers to the length to height ratio
of TV screens. The ratio of a standard TV is
4:3, while the ratio of a high-definition or wide
TV is 16:9. The letter box allows you to enjoy
a picture with a wider perspective on a standard
4:3 screen.
JPEG
A very common digital still picture format. A
still-picture data compression system proposed
by the Joint Photographic Expert Group, which
features small decrease in image quality in spite
of its high compression ratio. Files are
recognised by their file extension ‘JPG or JPEG’.
Glossary
10 Glossary
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising