Philips | HTS3000/98 | Quick Start Guide | Philips DVD home theatre system HTS3000/98 Quick start guide

Philips DVD home theatre system HTS3000/98 Quick start guide
3
HTS3000
DVD HOME THEATRE SYSTEM
Enjoy
Start disc playback
Listen to radio
A Press OPEN/CLOSE ç to open the disc tray.
A Press RADIO.
Quick Start Guide
The display panel shows ‘AUTO INSTALL PRESS
PLAY’.
B Press u.
All the available radio stations with strong reception
signal will be stored automatically.
C Once complete, use í / ë keys to select a preset
B
C
D
E
radio station.
Place a disc with the disc label facing up.
1
2
3
Press OPEN/CLOSE ç to close the disc tray.
Playback starts automatically.
If the disc menu appears on the TV, use
keys or numeric keypad to select an option in the
menu and press OK to start playback.
z To enjoy the powerful surround sound from the
speakers, press SURROUND on the remote
control to turn on the multi-channel surround
mode.
Connect
Set up
Enjoy
F Press „ to stop playback.
Note When you press u button, playback
resumes from where it last stopped. To start playback
from the beginning, you have to press
.
What’s in the box?
Troubleshooting
For more troubleshooting tips, see the user manual.
No picture.
•
•
Main Unit
Press DISC on the remote control.
Check the connection to the TV and ensure the plugs are firmly in place.
Remote Control
and 2 batteries
Composite
video cable
No sound.
•
•
•
Check the speaker connections and settings.
Check the audio connections and press SOURCE to select the correct input source.
Press SURROUND to turn on the multi-channel surround output.
User
Manual
The main unit does not work.
•
Disconnect the power cord from the power outlet for a few minutes. Reconnect the power cord and try again.
1 centre, 2 front, 2 rear speakers
and subwoofer
Need help?
User Manual
See the user manual that came with your Philips DVD Home Theatre System.
Online
Go to www.philips.com/welcome
2007 C Koninklijke Philips N.V.
All rights reserved.
www.philips.com
FM wire
antenna
AM/MW
loop antenna
Power cable
1
A
Connect
2
Placement
C
Proper speakers system placement is important to
ensure optimum sound performance.
FRON
T
LEFT
REAR
LEFT
D
Connect the speakers and
subwoofer
Connect the various coloured plugs from the speakers
and subwoofer to the same coloured sockets at the rear
of the main unit.
A
Connect the radio antennas
Keep the antennas away from the electronic devices to
prevent unwanted interference.
Finding the viewing channel
A Press 2 (STANDBY ON) on the main unit to turn
it on.
B Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
AM/MW antenna
STANDBY-ON
CEN
TER
B
SUBWOOFER
FRON
T
RIGHT
FRONT CENTRE
SPEAKERS
SUB
REAR
RIGHT
WOO
AM/
MW
Main Unit (rear)
FER
A Place the centre speaker above or close to the TV.
B Place the subwoofer on the floor, at least one metre
FRONT
RIGHT
FRONT
LEFT
A
C
REAR
RIGHT
REAR
LEFT
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT, ° button) until
you see the Video In channel.
FM antenna
away from the TV.
A Connect the FM antenna to the inner pin of the
C Place the front speakers at equal distances from the
FM 75 socket. For optimum reception, extend the
wire and fix its end to the wall.
TV.
B
B Unfold the AM/MW loop antenna and fix the claw
D Place the rear speakers at normal listening ear level.
B
Set up
into the slot. Push the tabs and insert the wires into
the AM/MW sockets.
Select the display language on the
screen
A Press SETUP.
The { General Setup Page } appears.
C Connect in the power cable from the main unit to
Connect the main unit to TV
the AC power outlet.
General Setup Page
VIDEO IN
(CVBS)
E
Television
(rear)
Main Unit (rear)
SPEAKERS
VIDEO IN
(CVBS)
AM/
MW
Connect audio output from TV
(optional)
To hear the TV audio through this home theatre system,
use a red and white audio cables (not supplied) to
connect the AUDIO IN-TV sockets on the main unit to
the AUDIO OUT sockets on your TV.
AUDIO
OUT
SPEAKERS
Disc Lock
Display Dim
Program
OSD Language
Screen Saver
Sleep
DivX(R) VOD Code
AM/
MW
Television
(rear)
AUDIO OUT
Main Unit (rear)
VIDEO OUT
SPEAKERS
CVBS socket on the main unit to the VIDEO IN
socket on your TV.
Note It is important to connect the main unit
directly to your TV.
SETUP
B Press
C Use
to select { OSD Language } and press
.
keys to select a language option in the
menu and press OK to confirm.
D Press SETUP to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this Home
Theatre system, not for the DVD disc menu.
Y
z Connect a composite video cable (supplied) from the
Melayu
Русский
AUDIO
OUT
AUDIO IN
Pr
English
AM/
MW
Main Unit (rear)
Note When watching the TV programmes, you can
press TV on the remote control to get the sound
output from the speakers.
There are various setup options (Audio Setup, Video
Setup, Preference Setup) available on this Home Theatre
System. Refer to the user manual for more information.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising