Philips | CD3653Q/37 | Quick Start Guide | Philips Perfect sound Cordless phone with answering machine CD3653Q/37 Quick start guide

Philips Perfect sound Cordless phone with answering machine CD3653Q/37 Quick start guide
Listen to messages recorded on the answering machine
(for CD365 only)
• Start/Stop playback: Press play/stop.
• Adjust the volume: Press / .
• Skip backward:
•
•
During message playback, press
to play the message from the beginning.
During the first second of the current message, press
to play the
previous message.
Skip forward: Press
to skip to the next message.
Delete the current message: Press erase.
Note
• For more information, see the Telephone answering machine section
in the user manual.
Register your product and get support at
www.philips.com/welcome
Welcome to Philips
Register your product at www.philips.com/welcome
CD360
CD365
Need help?
User Manual
Refer to the User Manual that came with your new phone.
Online help
www.philips.com/support
© 2009 Koninklijke Philips Electronics N.V. All rights
reserved. Reproduction in whole or in part is prohibited
without the written consent of the copyright owner.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
Troubleshooting
No dialing tone
•
Check your phone connections.
The handset is out of range. Move it closer to the base station.
The signal icon flashes.
Quick Start Guide
•
The handset is out of range. Move it closer to the base station.
If the handset displays [UNREGISTERED], register the handset.
The caller ID does not display.
•
The service is not activated. Check with your service provider.
The caller’s information is withheld or unavailable.
For more information, see the User Manual.
1
2
3
0168
Printed in China
CD360-365_37_QSG_EN_V3.0
Connect
Install
Enjoy
What’s in the box
1
Connect
3
Connect the base station
Enjoy
Make a call
Base station with
bracket for CD360
OR
Belt clip
flash
TALK
and dial the phone number; or
1
Press
2
Dial the phone number and press
flash
TALK
to dial out the call.
Answer a call
When the phone rings, press
flash
TALK
or
to answer the call.
End a call
Press
exit
END
.
Adjust the earpiece volume
Handset
CD365
User manual
Guarantee
Line cord*
Power supply
1
2
3
Connect the output plug of the power socket to the bottom of the base station.
Connect the power socket to a standard wall outlet.
Connect the telephone line cord to the phone socket at the bottom of the base
station and the wall phone socket.
2
Quick Start Guide
Press
call ID
or
Ph.Book
to adjust the volume during a call.
Set the handset’s ringtone
1
2
Press menu.
Select [PERSONAL SET] > [HANDSET TONES] > [RING TONES],
then press [OK] to confirm.
Install
3
Select a ringtone, then press [OK] to confirm.
» The setting is saved.
Install the handset
Add a record
1
2
Press menu.
Select [PHONEBOOK] > [NEW ENTRY], then press [OK]
to confirm.
Note
3
• In some countries, you have to connect the line adaptor to the line cord, then
Enter the name then press [OK] to confirm.
4
Enter the number, then press [OK] to confirm.
•
plug the line cord to the line socket.
In multi-handset packs, there are additional handsets and chargers with power
supply units.
CD365
Call from the phonebook
1
2
3
Caution
• Use only the supplied batteries and adaptor
1
2
The batteries are pre-installed in the handset. Pull the battery tape off from
the battery door before charging.
Place the handset on the base station to power up.
Note: Charge the batteries for 24 hours before first use.
For more information on the battery icon status, see the User Manual.
to access the phonebook.
Press
Select a contact in the phonebook list.
Press
to make the call.
Ph.Book
flash
TALK
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising