Philips | 32PHT5813S/94 | Owner's Manual | Philips 5800 series Ultra Slim Full HD LED Smart TV 43PFT5813S/94 User manual

Philips 5800 series Ultra Slim Full HD LED Smart TV 43PFT5813S/94 User manual
Register your product and get support at
5813 series
www.philips.com/TVsupport
User Manual
32PHT5813S
43PFT5813S
Contents
1 Get Support
1.1 Identify and Register your TV
4
1.2 TV Help and User Manual
4
1.3 On-line Help and User Manual
4
1.4 Consumer Care / Repair
5
2 Software
11 Open TV Setting Menus
34
6
11.1 Home Menu Overview
34
11.2 Frequent settings and All settings
11.3 All Settings
34
6
7
2.1 Update Software
2.2 Software Version
3 Quick Guide
12 Network
8
3.1 Remote Control
8
3.2 IR sensor
9
3.3 Joystick - Local Control
4 Setting Up
45
10
13 Smart TV
48
4.1 Read Safety
11
4.2 TV Placement
11
4.3 Turn on TV
11
13.1 Setup Smart TV
48
13.2 Smart TV Start Page
13.3 App Gallery
48
5 Connections
14 Netflix
13
5.1 Connectivity guide
13
5.2 Antenna
13
5.3 Video Device
13
5.4 Audio Device
13
5.5 Mobile Device
14
5.6 Other Device
16
6.1 Source List
18
6.2 Rename Device
7 Channels
16 Specifications
18
19
52
16.5 Supported Input Resolution - Computer
52
16.6 Sound
53
16.7 Multimedia
24
53
17 Troubleshooting
27
54
17.1 Tips
54
17.2 Switch On
54
17.3 Remote Control
55
17.4 Channels
55
17.5 Picture
55
17.6 Sound
57
17.7 HDMI
57
17.8 USB
57
17.9 Wi-Fi and Internet
58
17.10 Wrong Menu Language
8.1 What You Need
27
8.2 Using the TV Guide
27
9 Recording and Pause TV
29
9.1 Recording
9.2 Pause TV
52
16.1 Power
52
16.2 Reception
52
16.3 Display Resolution
52
16.4 Supported Input Resolution - Video
19
8 TV Guide
50
15.1 End of Use
50
15.2 E-Waste Declaration for India
50
15.3 Restriction on Hazardous Substances
statement
50
15.4 BEE Energy star
51
18
Install Channel
19
Channel List
22
Favourite Channels
Text / Teletext
24
48
49
15 Environmental
7.1 About Channels and Switch Channels
7.2
7.3
7.4
7.5
34
12.1 Home Network
45
12.2 Connect to Network
45
12.3 Network Settings
46
11
6 Switch Source
32
10.1 From a USB Connection
10.2 Photos
32
10.3 Videos
32
10.4 Music
33
4
29
30
10 Videos, Photos and Music
32
18 Safety and Care
2
58
59
18.1 Safety
59
18.2 Screen Care
60
19 Terms of Use
20 Copyrights
61
62
20.1 MHL
62
20.2 HDMI
62
20.3 Dolby Audio
62
20.4 DTS-HD
62
20.5 Wi-Fi Alliance
62
20.6 Other Trademarks
21 Open Source
62
63
21.1 Open Source Software
21.2 Open Source License
63
63
22 Disclaimer regarding services
and/or software offered by third
parties 69
Index
70
3
TV information.
• Troubleshooting - Find a solution for
frequent ask questions.
• Factory settings - Reset all settings to
factory settings.
• Reinstall TV - Reinstall and redo the
complete TV installation.
• Contact info - Show the telephone
number or web address for your country or
region.
1
Get Support
1.1
Identify and Register your TV
Identify your TV - TV model number and
serial number
* Ambilight setting is only for models which
support Ambilight function.
You might be asked to provide the TV
product model number and serial number.
Find these numbers on the packaging label
or on the type label on the back or bottom
of the TV.
1.3
On-line Help and User
Manual
Register your TV
Register your TV and enjoy a range of
benefits including full support (including
downloads), privileged access to information
about new products, exclusive offers and
discounts, the chance to win prizes and even
participate in special surveys about new
releases.
To solve any Philips TV related problem, you
can consult our online support. You can
select your language and enter your product
model number.
Go to www.philips.com/TVsupport.
On the support site you can find your
country's telephone number to contact us as
well as answers to frequently asked
questions (FAQs). In some countries, you
can chat with one of our collaborators and
ask your question directly or send a question
by email.
You can download new TV software or the
manual to read on your computer.
Go to www.philips.com/TVsupport
1.2
TV Help and User Manual
 Settings > Help
You can use Help function to diagnose and
get more information about your TV.
For more TV troubleshooting and frequently
asked questions (FAQs)...
• How to - You can see instructions on how
to install channels, sort channels, update TV
software, connect external devices and use
Smart functions on your TV.
Go
to http://philips-tvconsumercare.kxondema
nd.com/portal/en/ModelSelect
• Check the TV - You can check if the
picture, sound, Ambilight* are working fine
during playing a short video clip.
• Check the network - Check the network
connection.
• Update software - Check available
software updates.
• User manual - Read the user manual for
TV Help on your tablet, smartphone or
computer
To carry out extended sequences of
instructions more easily, you can download
the TV Help in PDF format to read on your
smartphone, tablet or
4
computer. Alternatively, you can print the
relevant Help page from your computer.
To download the Help (user manual) go
to www.philips.com/TVsupport
1.4
Consumer Care / Repair
For support and repair, call the Consumer
Care hotline in your country. Our service
engineers will take care of a repair, if
necessary.
Find the telephone number in the printed
documentation that came with the TV.
Or consult our
website www.philips.com/TVsupport and
select your country if needed.
TV model number and serial number
You might be asked to provide the TV
product model number and serial number.
Find these numbers on the packaging label
or on the type label on the back or bottom
of the TV.
 Warning
Do not attemp to repair the TV yourself. This
may cause severe injury, irrepairable
damage to your TV or void your warranty.
5
connections of the TV.
Select Start and press OK. An
identification file is written on the USB
memory device.
3 - Download the TV software
- Insert the USB memory into your computer.
- On the USB memory device, locate the
file update.html and double click it.
- Click on Send ID.
- If new software is available, download the
.zip file.
- After the download, unzip the file and
copy the file autorun.upg onto the USB
memory device.
- Do not place this file in a folder.
4 - Update the TV software
Insert the USB memory into the TV again.
The update starts automatically.
The TV switches itself off for 10 seconds and
then back on again. Please wait.
2
Software
2.1
Update Software
Search for Updates
Update from Internet
 (Home) > Settings > Update software
> Search for updates > Internet
(Recommended)
Look for a software update yourself.
• If the TV is connected to the Internet, you
may receive a message to update the TV
software. You need a high-speed
(broadband) Internet connection. If you
receive this message, we recommend you to
carry out the update.
• During the software update, there is no
picture and the TV will switch off and on
again. This might happen several times. The
update can take a few minutes.
• Wait until the TV picture comes back up. Do
not press the power switch  on the TV or
on the remote control during the software
update.
Do not . . .
• use the remote control
• remove the USB memory device from the
TV
• press  twice
• press the power switch on the TV
The TV switches itself off (for 10 seconds)
and then back on again. Please wait.
The TV software has been updated. You can
use the TV again.
To prevent an accidental update of the TV
software, delete the autorun.upg file from
the USB memory device.
Update from USB
 (Home) > Settings > Update
software > Search for updates > USB
Local Updates
• You need a computer with an high-speed
Internet connection and a USB memory
device to upload the software on the TV.
• Use a USB memory device with 512MB free
space. Make sure that write protection is
switched off.
1 - Start the update on TV
Select Update software > Search for
updates > USB, then press OK.
2 - Identify the TV
Insert the USB memory into one of the USB
 (Home) > Settings > Update
software > Search for
updates > USB > Local updates.
For dealers and expert users.
Look for OAD updates (Over-theair Download)
6
 (Home) > Settings > Update
software > Search for updates > Look for
OAD updates.
Scan to search for an Over-the-air software
update.
2.2
Software Version
 (Home) > Settings > Update
software > Current software info
To view the current TV software version.
7
3
Key Overview
Quick Guide
Top
3.1
Remote Control
Batteries and Cleaning
Replace batteries
If the TV does not react on a key press on
the remote control, the batteries might be
empty.
1 -  Standby / On
To switch the TV on or back to Standby.
To replace the batteries, open the battery
compartment on the back of the remote
control.
2 - Playback and Record
• Play , to playback.
• Pause , to pause playback
• Stop , to stop playback
• Rewind , to rewind
• Fast forward , to go fast forward
• Record , to start recording
1 - Slide the battery door in the direction
shown by the arrow.
2 - Replace the old batteries with 2
type AAA-R03-1.5V batteries. Make sure
the + and the - ends of the batteries line up
correctly.
3 -  Media browser
To open or close the Media browser menu.
4 -  TV GUIDE
To open or close the TV Guide.
5 -  Search
To open the Smart TV searches page.
6 -  Settings
To open the Quick settings menu.
3 - Reposition the battery door and slide it
back until it clicks.
• Remove the batteries if you are not using
the remote control for a long time.
• Safely dispose of your old batteries
according to the end of use directions.
7 -  SOURCES
To open the Sources menu.
8 -  LIST
To open or close the channel list.
Cleaning
Your remote control is treated with a scratchresistant coating.
Middle
To clean the remote control, use a soft damp
cloth. Never use substances such as alcohol,
chemicals or household cleaners on the
remote control.
8
1- 
To open the Netflix App directly. With the TV
switched on or from standby.
1-
 Home
3 -     Colour keys
Direct selection of options. Blue key ,
opens Help.
• If you have a Netflix menbership
subscription, you can enjoy Netflix on this
TV. Your TV must be connected to the
Internet.
• To open Netflix, press  to open the
Netflix App. You can open Netflix
immediately from a TV in standby.
www.netflix.com
4 -  INFO
To open or close programme info.
2 -  Volume
To adjust the volume level.
5 -  BACK
To close a menu without changing a setting.
3 - Number keys
To select a channel directly.
6 -  - EXIT
To switch back to watch TV. To stop an
interactive TV application.
4 - SUBTITLE
To switch subtitles on, off or to show
automatically.
7 -  OPTIONS
To open or close the Options menu.
5 -  Channel
To switch to the next or previous channel in
the channel list. To open the next or
previous page in Text/Teletext. To start the
next or previous chapter on a disc.
To open the Home menu.
2 -  SMART TV
To open the Smart TV start page.
8 - OK key
To confirm a selection or setting. To open
the channel list while watching TV.
6 -  Mute
To mute the sound or to restore it.
9 - Arrow / navigation keys
To navigate up, down, left or right.
7 - TEXT
To open or close Text/Teletext.
10 -  Picture FORMAT
To open or close the Picture Format menu.
3.2
Bottom
IR sensor
The TV can receive commands from a
remote control that uses IR (infrared) to send
9
commands. If you use such a remote control,
always make sure you point the remote
control at the infrared sensor on the front of
the TV.
Press up or down to go through the list of
sources, including the tuner selection.
The menu will disappear automatically.
 Warning
Do not put any objects in front of IR sensor
of the TV, it may block the IR signal.
3.3
Joystick - Local Control
Keys on TV
If you lost the remote control or its batteries
are empty, you can still do some basic TV
operations.
To open the basic menu…
1 - With the TV switched on, press the
joystick key on the back of the TV to bring up
the basic menu.
2 - Press left or right to
select  Volume,  Channel
or  Sources. Select  Demo, to start a
demo movie.
3 - Press up or down to adjust the volume
or tune to the next or previous channel.
10
4
from www.philips.com/TVsupport.
Setting Up
Use the model number of the TV to look for
the Quick Start Guide to download.
4.1
Read Safety
Wall Mounting
Read the safety instructions first before you
use the TV.
Your TV is also prepared for a VESAcompliant wall mount bracket (sold
separately).
Use the following VESA code when
purchasing the wall mount . . .
To read the instructions, in Help > User
manual, press the colour
key  Keywords and look up Safety and
Care.
4.2
TV Placement
• 32PHT5813
VESA MIS-F 100, M6 (Minimum 12 mm,
Maximum 16 mm)
• 43PFT5813
VESA MIS-F 200x200, M6 (Minimum 12
mm, Maximum 16 mm)
Tips on Placement
• Position the TV where light does not shine
directly on the screen.
• Position the TV up to 15 cm away from the
wall.
• The ideal distance to watch TV is 3 times its
diagonal screen size. When seated, your
eyes should be level with the centre of the
screen.
Preparation
First remove the 4 plastic screw caps out of
the threaded bushes on the back of the TV.
Make sure that the metal screws, to mount
the TV to the VESA-compliant bracket, go
about 10mm deep inside the threaded
bushes of the TV.
Caution
Wall mounting the TV requires special skills
and should only be performed by qualified
personnel. The TV wall mounting should
meet safety standards according to the TVs
weight. Also read the safety precautions
before positioning the TV.
TP Vision Europe B.V. bears no responsibility
for improper mounting or any mounting that
results in accident or injury.
TV Stand
You can find the instructions for mounting
the TV stand in the Quick Start Guide that
came with the TV. In case you lost this guide,
you can download it
4.3
11
Turn on TV
the remote control. You can also press the
small joystick key on the back of the TV.
Connect Power Cable
In standby mode, the TV is still connected to
the mains power but consumes very little
energy.
• Insert the power cable into
the POWER connector on the back of the
TV.
• Make sure the power cable is securely
inserted in the connector.
• Make sure that the power plug, in the wall
socket, is accessible at all times.
• When you unplug the power cable, always
pull the plug, never pull the cable.
To switch off the TV completely, disconnect
the power plug.
When disconnecting the power plug, always
pull the power plug, never the cord. Ensure
that you have full access to the power plug,
power cord and outlet socket at all times.
Although this TV has a very low standby
power consumption, unplug the power cable
to save energy if you do not use the TV for a
long period of time.
On or Standby
Before you switch on the TV, make sure you
plugged in the mains power in
the POWER connector on the back of the
TV.
Switch On
• Press the small joystick key on the back of
the TV.
Switch to standby
To switch the TV to standby, press  on
12
5
Connections
Copy protection
HDMI ports support HDCP (High-bandwidth
Digital Content Protection). HDCP is a copy
protection signal that prevents copying
content from a DVD disc or Blu-ray Disc.
Also referred to as DRM (Digital Rights
Management).
5.1
Connectivity guide
Always connect a device to the TV with the
highest quality connection available. Also,
use good quality cables to ensure a good
transfer of picture and sound.
Component
When you connect a device, the TV
recognizes its type and gives each device a
correct type name. You can change the
type name if you wish. If a correct type name
for a device is set, the TV automatically
switches to the ideal TV settings when you
switch to this device in the Sources menu.
Y Pb Pr - Component Video is a high quality
connection.
The YPbPr connection can be used for High
Definition (HD) TV signals. Next to the Y, Pb
and Pr signals add the Audio Left and Right
signals for sound.
Match the YPbPr (green, blue, red)
connector colours with the cable plugs when
you connect.
Use an Audio L/R cinch cable if your device
also has sound.
5.2
Antenna
Insert the antenna plug firmly into
the Antenna socket at the back of the TV.
You can connect your own antenna or an
antenna signal from an antenna distribution
system. Use an IEC Coax 75 Ohm RF
antenna connector.
Composite
Use this antenna connection for DVB-T and
DVB-C input signals.
CVBS - Composite Video is a standard
quality connection. Next to the CVBS signal
adds the Audio Left and Right signals for
sound.
5.3
• Y shares the same jack with CVBS.
• Component and Composite share audio
jacks.
Video Device
5.4
HDMI
Audio Device
An HDMI connection has the best picture
and sound quality.
HDMI ARC
For best signal quality transfer, use a High
speed HDMI cable and do not use an HDMI
cable longer than 5 m.
Only HDMI 2 on the TV have
ARC (Audio Return Channel).
13
HDMI
If the device, typically a Home Theatre
System (HTS), also has the HDMI ARC
connection, connect it to HDMI 2
connection on this TV. With the HDMI ARC
connection, you do not need to connect the
extra audio cable that sends the sound of
the TV picture to the HTS. The HDMI ARC
connection combines both signals.
Your TV is a Wi-Fi CERTIFIED
Miracast™ device. With Miracast™, you can
watch and share the screen of your
smartphone, tablet or computer on your TV
screen wirelessly. You can stream videos
(audio and video), share photos or anything
else that's on screen of the device. No need
to connect the device to your home network.
Both the TV and the device must be Wi-Fi
CERTIFIED Miracast™ devices and have
Miracast switched on.
Digital Audio Out - Optical
Miracast on this TV is subject to the HDCP
protocol and cannot display copy-protected
premium content sent by a device. The
maximum video resolution supported is
720p for 2.4GHz Wi-Fi or 1080p for 5GHz WiFi.
Audio Out - Optical is a high quality sound
connection.
This optical connection can carry 5.1 audio
channels. If your device, typically a Home
Theatre System (HTS), has no HDMI ARC
connection, you can use this connection
with the Audio In - Optical connection on
the HTS. The Audio Out - Optical connection
sends the sound from the TV to the HTS.
For more information on Wi-Fi CERTIFIED
Miracast™ go to www.wi-fi.org
Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi
logo are registered trademarks of the Wi-Fi
Alliance. Wi-Fi CERTIFIED
Miracast™, Miracast™ are trademarks of the
Wi-Fi Alliance.
Headphones
You can connect a set of headphones to
the  connection on the side of the TV.
The connection is a mini-jack 3.5mm. You
can adjust the volume of the headphones
separately.
Using Miracast
Switch on Miracast
Press  SOURCES > Miracast
Share a Screen on TV
5.5
1 - Activate Miracast (Screen mirroring) on
your mobile device.
2 - On your mobile device, select the TV.
(This TV will be displayed as TV model
name)
3 - Select the TV name on your mobile
device, after connection, you can enjoy
using Miracast.
Mobile Device
Wi-Fi Direct / Miracast
About Wi-Fi Miracast
You can view your photos or play your music
and videos from a mobile device on your TV
with Wi-Fi Miracast™. The mobile device and
the TV should be within range, which usually
means being in the same room.
Stop Sharing
Check if your mobile device is ready for
Miracast.
14
You can stop sharing a screen from the TV or
from the mobile device.
mobile device on the TV screen. Your mobile
device charges its battery at the same time.
The MHL connection is ideal for watching
movies or playing games from your mobile
device on TV for a longer time.
From the device
With the application you use to start
Miracast, you can disconnect and stop
watching the screen of the device on TV. The
TV will switch back to the last selected
programme.
Charging
With the MHL cable connected, your device
will charge while the TV is switched on (not
in standby).
From the TV
MHL Cable
To stop watching the screen of the device on
TV, you can . . .
You need a passive MHL cable (HDMI to
Micro USB) to connect your mobile device to
the TV. You might need an extra adapter to
connect to your mobile device. To connect
the MHL cable to the TV use the HDMI 1
MHL connection.
• press  EXIT to watch a TV broadcast
• press  (Home) to start another activity
on TV
• press  SOURCES to open the Sources
menu and select a connected device.
Reset Wi-Fi Miracast connections
All previously connected devices are stored
in the Wi-Fi Miracast list of connections.
To clear all connected Miracast devices…
 (Home) > Settings > All
settings > Network > Reset Wi-Fi
Miracast connections.
MHL, Mobile High-Definition Link and the
MHL Logo are trademarks or registered
trademarks of the MHL, LLC.
Screen Delay
Apps - Philips TV Remote App
The normal delay when sharing a screen
with Miracast is about 1 second. The delay
might be longer if you are using older
devices with less processing power.
With the TV Remote App, you master your
media around you. Send photos, music or
videos to your big TV screen or watch any of
your TV channels live on your tablet or
phone. Look up what you want to watch on
the TV Guide and watch it on your phone or
TV. With the TV Remote App you can use
your phone as a remote control*.
MHL
This TV is MHL™ compliant.
Download the Philips TV Remote App from
your favourite app store today.
If your mobile device is also MHL compliant,
you can connect your mobile device with a
MHL cable to the TV. With the MHL cable
connected you can share what's on your
The Philips TV Remote App is available for
15
iOS and Android and is free of charge.
4GB disk space.
* When use your phone as a remote control,
TV cannot be switched on or off via your
phone.
To Record
To pause and record a broadcast, you need
a minimum of 250GB disk space. If you
want to record a broadcast with TV guide
data from the Internet, you need to have the
Internet connection installed on your TV
before you install the USB Hard Drive.
5.6
Other Device
1 - Connect the USB Hard Drive to one of
the USB connections on the TV. Do not
connect another USB device to the other
USB ports when formatting.
2 - Switch on the USB Hard Drive and the
TV.
3 - When the TV is tuned to a digital TV
channel, press  (Pause). Trying to pause
will start the formatting.
USB Flash Drive
You can view photos or play your music and
videos from a connected USB flash
drive. Insert a USB flash drive in one of
the USB connections on the TV while the
TV is switched on.
The TV detects the flash drive and opens a
list showing its content.
If the contents list does not appear
automatically, press  SOURCES and
select USB.
Follow the instructions on screen.
When the USB Hard Drive is formatted, leave
it connected permanently.
For more information on watching or playing
content from a USB flash drive, in Help,
press the colour key  Keywords and
look up Photos, Videos and Music.
Warning
The USB Hard Drive is formatted exclusively
for this TV, you cannot use the stored
recordings on another TV or PC. Do not copy
or change recording files on the USB Hard
Drive with any PC application. This will
corrupt your recordings. When you format
another USB Hard Drive, the content on the
former will be lost. A USB Hard Drive
installed on your TV will need reformatting
for use with a computer.
USB Hard Drive
Installation
If you connect a USB Hard Drive, you can
pause or record a TV broadcast. The TV
broadcast must be a digital broadcast (DVB
broadcast or similar).
To read the instructions, in Help, press the
colour key  Keywords and look up USB
Hard Drive.
Before you can pause or record a broadcast,
you must connect and format a USB Hard
Drive. Formatting removes all files from the
USB Hard Drive.
Formatting
Before you can pause or record a broadcast,
you must connect and format a USB Hard
Drive. Formatting removes all files from the
USB Hard Drive. If you want to record
broadcasts with TV Guide data from the
To Pause
To pause a broadcast, you need a USB
compatible Hard Drive with a minimum of
16
Internet, you must setup the Internet
connection first before you install the USB
Hard Drive.
Warning
The USB Hard Drive is formatted exclusively
for this TV, you cannot use the stored
recordings on another TV or PC. Do not copy
or change recording files on the USB Hard
Drive with any PC application. This will
corrupt your recordings. When you format
another USB Hard Drive, the content on the
former will be lost. A USB Hard Drive
installed on your TV will need reformatting
for use with a computer.
To format a USB Hard Drive…
1 - Connect the USB Hard Drive to one of
the USB connections on the TV. Do not
connect another USB device to the other
USB ports when formatting.
2 - Switch on the USB Hard Drive and the
TV.
3 - When the TV is tuned to a digital TV
channel, press  (Pause). Trying to pause
will start the formatting. Follow the
instructions on screen.
4 - The TV will ask if you want to use the
USB Hard Drive to store apps, agree to the
question if you do.
5 - When the USB Hard Drive is formatted,
leave it connected permanently.
17
6
Switch Source
6.1
Source List
• To open the sources menu,
press  SOURCES .
• To switch to a connected device, select the
device with the arrows  (Right) or  (Left)
and press OK.
• To close the source menu without
switching to a device,
press  SOURCES again.
6.2
Rename Device
• Only CVBS, YPbPr, HDMI sources can be
renamed or replace device icon.
 (Home) > Settings > All
settings > General settings > Input sources
> Source > Edit
1 - Select one of the device icons and
press OK, the preset name appears in the
typing field.
2 - Press  (up) to move to the typing
field, press OK, then enter new name using
on-screen keyboard.
- Press  (red) key to enter with lowercase
- Press  (green) key to enter with uppercase
- Press  (yellow) key to enter number
and symbol
- Press  (blue) key to delete a character
3 - Select Done when complete the
editing.
18
7
7.2
Channels
Install Channel
Antenna and Cable
7.1
About Channels and Switch
Channels
Digital: Reception Test
 (Home) > Settings > Install
Channels > Antenna/cable
installlation > Digital: reception test
To watch TV channels
• Press . The TV tunes to the TV channel
you last watched.
• Press  (Home) > TV > Channels and
press OK.
• Press + or  - to switch channels.
• If you know the channel number, type in
the number with the number
keys. Press OK after you entered the
number to switch channels.
• To switch back to the previously tuned
channel, press  BACK .
The digital frequency is shown for this
channel. If the reception is poor, you can
reposition your antenna. To check the signal
quality of this frequency again,
select Search and press OK.
To enter a specific digital frequency yourself,
use the remote control digit keys.
Alternatively, select the frequency, position
the arrows on a number
with  and
 and change the number
with  and . To check the frequency,
select Search and press OK.
To switch to a channel from a channel list
• While watching a TV channel,
press  LIST to open the channel lists.
• The channel list can have several pages
with channels. To view the next or previous
page, press  + or  -.
• To close the channel lists without switching
channels, press  LIST again.
Analogue: Manual Installation
 (Home) > Settings > Install
Channels > Antenna/cable
installlation > Analogue: manual
installation
Channel icons
After an Automatic channel update of the
channel list, newly found channels are
marked with a  (star).
If you lock a channel, it will be marked with
a  (lock).
Analogue TV channels can be manually
installed, channel by channel.
• System
To set up the TV system, select System.
Select your country or the part of the world
where you are now and press OK.
Radio channels
If digital broadcasting is available, digital
radio stations are installed during
installation. Switch to a radio channel just
like you switch to a TV channel.
• Search Channel
To find a channel, select Search
Channel and press OK. You can enter a
frequency yourself to find a channel or let
the TV search for a channel. Press OK,
select Search and press OK to search for
a channel automatically. The found channel
is shown on screen and if the reception is
This TV can receive digital television
standard DVB. TV may not work properly
with some operators of digital television ,
non-compliance with requirements of the
standard in full.
19
poor, press Search again. If you want to
store the channel, select Done and
press OK.
Version
Copy a channel list to USB flash drive
 (Home) > Settings > All
settings > Channels > Expert mode
settings > Channel list copy > Copy to
USB
• Fine tune
To fine tune a channel, select Fine
tune and press OK. You can fine tune the
channel with  or .
If you want to store the channel found,
select Done and press OK.
Check channel list version
 (Home) > Settings > All
settings > Channels > Expert mode
settings > Channel list copy > Current
version
• Store
You can store the channel on the current
channel number or as a new channel
number.
Select Store and press OK. The new
channel number is shown briefly.
Upload a Channel List
You can redo these steps until you have
found all available analogue TV channels.
To not Installed TVs
Depending on whether your TV is already
installed or not, you must use a different
method to upload a channel list.
Channel List copy
To a TV that is not yet installed
1 - Plug in the power plug to start the
installation and select language and country.
You can skip the channel search. Finish the
installation.
2 - Plug in the USB flash drive that holds the
channel list of the other TV.
3 - To start the channel list upload,
press  (Home) > Settings > All
settings > Channels > Expert mode
settings > Channel List Copy > Copy to
TV and press OK. Enter your PIN code if
necessary.
4 - The TV notifies you if the channel list is
copied to the TV successfully. Unplug the
USB flash drive.
Introduction
Channel list copy is intended for dealers and
expert users.
With Channel list copy, you can copy the
channels installed on one TV onto another
Philips TV of the same range. With Channel
list copy, you avoid the time-consuming
channel search by uploading a predefined
channel list on a TV. Use a USB flash drive of
minimum 1 GB.
Conditions
• Both TVs are from the same year range.
• Both TVs have the same hardware type.
Check the hardware type on the TV type
plate on the back of the TV.
• Both TVs have compatible software
versions.
To Installed TVs
Depending on whether your TV is already
installed or not, you must use a different
method to upload a channel list.
Copy a Channel List, Check Channel List
20
Alternatively you can select Automatic.
To an already installed TV
1 - Verify the country setting of the TV. (To
verify this setting, see chapter Re-install
channels. Start this procedure until you
reach the country setting.
Press  BACK to cancel the installation.)
If the country is correct continue with step 2.
If the country is not correct, you need to start
a reinstallation. See chapter Re-install
channels and start the installation. Select
the correct country and skip the channels
search. Finish the installation. When done,
continue with step 2.
2 - Plug in the USB flash drive that holds the
channel list of the other TV.
3 - To start the channel list upload,
press  (Home) > Settings > All
settings > Channels > Expert mode
settings > Channel List Copy > Copy to
TV and press OK. Enter your PIN code if
necessary.
4 - The TV notifies you if the channel list is
copied to the TV successfully. Unplug the
USB flash drive.
Automatic
If language information is part of the digital
broadcast and the broadcasted programme
is not in your language (the language set on
TV), the TV can show subtitles
automatically in one of your preferred
subtitle languages. One of these subtitle
languages must also be part of the
broadcast.
You can select your preferred subtitle
languages in Subtitle language.
Subtitles Language
If none of the preferred subtitle languages
are available, you can select another subtitle
language if available. If no subtitle languages
are available, you cannot select this option.
To read more information, in Help, press the
colour key  Keywords and look
up Subtitle Language.
Channel Options
Audio Language
Open Options
If none of the preferred audio languages are
available, you can select another audio
language if available. If no audio languages
are available, you cannot select this option.
While watching a channel, you can set some
options.
Depending on the type of channel you are
watching or depending on the TV settings
you made, some options are available.
To open the options menu…
To read more information, in Help, press the
colour key  Keywords and look
up Audio Language.
1 - While watching a channel,
press  OPTIONS.
2 - Press  OPTIONS again to close.
Dual I-II
Subtitles
If an audio signal contains two audio
languages but one language or both has no
language indication, this option is available.
To switch on Subtitles, press SUBTITLE.
You can switch
subtitles Subtitle on or
Mono / Stereo
Subtitle off .
21
You can switch the sound of an analogue
channel to Mono or Stereo.
7.3
Channel List
To switch to Mono or Stereo…
Tune to an analoge channel.
Open Channel List
1 - Press  OPTIONS,
select Mono/Stereo and press  (right).
2 - Select Mono or Stereo and press OK.
3 - Press  (left) repeatedly if necessary,
to close the menu.
To open the current channel list…
1 - Press , to switch to TV.
2 - Press  LIST to open the current
channel list.
3 - Press  OPTIONS > Select channel
list, and select one channel list you want to
watch.
4 - Press  LIST again to close the
channel list.
Status
Select Status to view technical information
on the channel or a connected device you
are watching.
Channel List Options
Universal Access
Open Option Menu
Only available when Universal access set to
On.
To open the channel list option menu...
 (Home) > Settings > All
settings > Universal access >
access > On.
• Press , to switch to TV.
• Press  LIST to open the current
channel list.
• Press  OPTIONS , and select one of
options.
• Press  LIST again to close the channel
list.
Universal
To read more information, in Help, press the
colour key  Keywords and look
up Universal Access.
Rename Channel
Share
1 - Press , to switch to TV.
2 - Press  LIST to open the current
channel list.
3 - Select one channel you want to rename.
4 - Press  OPTIONS > Rename channel,
and press OK.
5 - In the typing field, press OK to open onscreen keyboard, or press  BACK to hide
the on-screen keyboard.
6 - Use navigation keys to select a
character, then press OK.
- Press  (red) key to enter with lowercase
- Press  (green) key to enter with upper-
Enables the user to communicate his activity
with his social networks (such as Twitter or
email).
Video Selection
Digital TV channels can offer multi video
signals (multi-feed broadcast), different
camera viewpoints or angles of the same
event or different programmes on one TV
channel. The TV shows a message if any
such TV channels are available.
22
case
- Press  (yellow) key to enter number
and symbol
- Press  (blue) key to delete a character
7 - Select Done when complete the editing.
8 - Press  LIST again to close the
channel list.
Search Channels
 LIST >  OPTIONS >
channel
You can search for a channel to find it in a
long list of channels.
1 - Press , to switch to TV.
2 - Press  LIST to open the current
channel list.
3 - Press  OPTIONS > Search channel,
and press OK.
4 - In the typing field, press OK to open onscreen keyboard, or press  BACK to hide
the on-screen keyboard.
5 - Use navigation keys to select a
character, then press OK.
- Press  (red) key to enter with lowercase
- Press  (green) key to enter with uppercase
- Press  (yellow) key to enter number
and symbol
- Press  (blue) key to delete a character
6 - Select Done when complete the
editing.
7 - Press  LIST again to close the
channel list.
Select Channel Filter
 LIST >  OPTIONS >
Digital/analogue
Select one of channel combinations showing
in the channel list.
Create or Edit Favourites Channel List
 LIST >  OPTIONS >
Create favourites list
Select a channel then press OK to add in a
favourites channel list, once completed,
press  Done.
 LIST
>  OPTIONS >
Edit favourites
Select a channel then press OK to add in or
remove from a favourites channel list, once
completed, press  Done.
Lock or Unlock Channel
 LIST >  OPTIONS >
Unlock channel
Select Channel Range
 LIST
range
>  OPTIONS >
Search
Lock channel,
To prevent children from watching a
channel, you can lock a channel. To watch a
locked channel, you must enter the 4
digit Child Lock PIN code first. You cannot
lock programmes from connected devices.
Select channel
Select a range of channels in a favourites
channel list, once completed, press OK.
The locked channel will have  next to the
channel logo.
Select Channel List
 LIST
list
>  OPTIONS >
Select channel
Remove Favourite List
 LIST >  OPTIONS >
favourite list
Select a range of channels in a favourites
channel list, once completed, press OK.
23
Remove
To remove existing favourite list, select Yes.
3 - Select the channel to reorder and
press OK.
4 - Press the Navigation buttons to move
the highlighted channel to another location
and press OK.
5 - Once completed, press OK.
7.4
Favourite Channels
About Favourite Channels
Favourites List on TV Guide
You can create a favourite channel list that
only holds the channels you want to watch.
With the Favourite channel list selected, you
will only see your favourite channels when
you switch through channels.
You can link the TV Guide for your Favourite
List.
1 - While watching a TV channel,
press  LIST >  OPTIONS > Select
channel list.
2 - Select Antenna favourite or Cable
Favourite, and press OK.
3 - Press  TV GUIDE to open it.
Create a Favourites List
1 - While watching a TV channel,
press  LIST to open the channel list.
2 - Select the channel, and press  Mark
as favourites to mark as favourite.
3 - The selected channel is marked with
a .
4 - To finish, press  BACK . The channels
are added to the Favourites list.
With the TV Guide you can view a list of the
current and scheduled TV programmes of
your favourite channels. Along with your
favourite channels, the first 3 most used
channels from the broadcasters’ default list
will be appended after your favourite
channels for your preview. You need to add
these channels into your favourite list to
enable its operation (refer to "TV Guide"
chapter).
Remove Channel from the
Favourites List
On each page of TV Guide, there is a "Did
you know" grid inserted on your favourite
channel list. The "Did you know"-channel
provides useful tips to improve the way you
use your TV.
To remove a channel from the favourites list,
select the channel with , then
press  Unmark as favourite again to
unmark as favourite.
7.5
Text / Teletext
Reorder Channels
Subtitles from Text
You can reorder — reposition — channels in
the Favourite channel list.
If you tune to an analogue channel, you
need to make the subtitles available for each
channel manually.
1 - While watching a TV channel,
press  LIST >  OPTIONS > Select
channel list.
2 - Select Antenna favourite or Cable
Favourite, and press OK.
1 - Switch to a channel and press TEXT to
open Text.
24
2 - Enter the page number for subtitles,
usually 888.
3 - Press TEXT again, to close Text.
In Text/Teletext, press  OPTIONS to
select the following…
• Freeze page
To stop the automatic rotation of subpages.
• Dual screen / Full screen
To show the TV channel and Text alongside
each other.
• T.O.P. overview
To open T.O.P. Text.
• Enlarge
To enlarge the Text page for comfortable
reading.
• Reveal
To unhide hidden information on a page.
• Cycle subpages
To cycle subpages when these are available.
• Language
To switch the group of characters that Text
uses to display correctly.
• Text 2.5
To activate the Text 2.5 for more colours and
better graphics.
If you select On in the Subtitle menu when
watching this analogue channel, subtitles
will be shown if available.
To know if a channel is analogue or digital,
switch to the channel and press  INFO .
Text Pages
To open Text/Teletext press TEXT, while
you are watching TV channels.
To close Text, press TEXT again.
Select a Text page
To select a page . . .
1 - Enter the page number with the number
keys.
2 - Use the arrow keys to navigate.
3 - Press a colour key to select a colourcoded subject at the bottom of the screen.
Text Setup
Text sub-pages
Text language
A Text page number can hold several
subpages. The subpage numbers are shown
on a bar next to the main page number.
To select a subpage, press  or
.
Some digital TV broadcasters have several
Text languages available.
Set teletex preference language
T.O.P. Text pages
 (Home) > Settings > All
settings > Region and
language > Language > Primary
text, Secondary text
Some broadcasters offer T.O.P. Text.
To open T.O.P. Text pages within Text,
press  OPTIONS and select T.O.P.
overview.
Text 2.5
* The teletext can only be reached when the
channels are installed directly on the TV’s
internal tuner and the set is on TV mode. If a
set-top box is being used, the teletext will be
unavailable via TV. In that case, the set-top
box’s teletext can be used instead.
If available, Text 2.5 offers more colours and
better graphics. Text 2.5 is activated as a
standard factory setting.
To switch off Text 2.5…
1 - Press TEXT.
2 - With Text/Teletext open on screen,
press  OPTIONS.
3 - Select Text 2.5 > Off.
4 - Press  (left) repeatedly if necessary,
Text Options
25
to close the menu.
26
8
select the programme and press OK.
TV Guide
View programme details
To call up the details of the selected
programme, press  INFO .
8.1
What You Need
Change Day
With the TV guide you can view a list of the
current and scheduled TV programmes of
your channels. Depending on where the TV
guide information (data) is coming from,
analogue and digital channels or only digital
channels are shown. Not all channels offer
TV guide information.
If the TV guide information comes from the
broadcaster, you can press  + to view
the schedule of one of the next days.
Press  - to go back to the previous day.
Alternatively, you can
press  OPTIONS and select
day.
The TV can collect TV guide information for
the channels that are installed on the TV (e.g
the channels you watch with Watch TV). The
TV cannot collect the TV guide information
for channels viewed from a digital receiver.
Change
Set a Reminder
Using the TV Guide
You can set a reminder for a programme. A
message will alert you at the start of the
programme. You can tune to this channel
immediately.
Open the TV Guide
In the TV Guide a programme with a
reminder is marked with a  (clock).
To open the TV guide, press  TV GUIDE.
To set a reminder…
Press  TV GUIDE again to close.
1 - Press  TV GUIDE and select an
upcoming programme.
2 - Press  Set reminder and press OK.
8.2
The first time you open the TV Guide, the TV
scans all TV channels for programme
information. This may take several minutes.
TV guide data is stored on TV.
To clear a reminder…
1 - Press  TV GUIDE and select a
programme with the reminder, which is
marked with a  (clock).
2 - Press  Clear reminder, and
select Yes, then press OK.
Tune to a Programme
Switch to a programme
• From the TV guide, you can switch to a
current programme.
• To select a programme, use the arrow keys
to highlight the programme name.
• Navigate to the right to view programmes
scheduled later that day.
• To switch to the programme (channel),
Search by Genre
If the information is available, you can look
up scheduled programmes by genre like
movies, sports, etc.
27
To search for programmes by genre,
press  OPTIONS and select Search by
genre.
Select a genre and press OK. A list with the
found programmes appears.
List of Reminders
You can view a list of the reminders you
have set.
List of Reminders
To open the list of reminders…
1 - Press  TV GUIDE.
2 - Press  OPTIONS and select All
reminders.
3 - In the list of reminders, select the
reminder you want to remove, the selected
reminder is marked as .
4 - Press  BACK , select Clear
selected and press OK.
5 - Select Close to close the list of
reminders.
Set a Recording
You can set a recording in the TV Guide.
In the TV Guide, a programme set to be
recorded is marked with  .
To see the recording list,
press  Recordings , a programme set to
be recorded is marked with a  (red
dot) on the front of the programme name.
To record a programme…
1 - Press  TV GUIDE and select a future
or ongoing programme.
2 - Press the colour key  Record .
To cancel a recording…
1 - Press  TV GUIDE and select the
programme set for recording.
2 - Press the colour key  Clear
recording.
28
When TV Guide data is available, the
programme you are watching will be
recorded from the moment you pressed the
recording key until the programme ends.
9
Recording and
Pause TV
• If you receive TV guide information from
the broadcaster, the recording starts
immediately. You can adjust the end time of
the recording in the list of recordings.
9.1
Recording
What You Need
Schedule a Recording
You can record a digital TV broadcast and
watch it later.
You can schedule a recording of an
upcoming programme for today or a few
days from today (maximum of 8 days away).
The TV will use the data from the TV Guide
to start and end the recording.
To record a TV programme you need…
• a connected USB Hard Drive formatted on
this TV
• digital TV channels installed on this TV
• to receive channel information for the on
screen TV Guide
• a reliable TV clock setting. If you reset the
TV clock manually, recordings may fail.
To record a programme…
1 - Press  TV GUIDE.
2 - On the TV guide, select the channel and
programme you wish to
record. Press  (Right) or  (Left) to
scroll through the programmes of a channel.
3 - With the programme highlighted, press
the colour key  Record . The programme
is scheduled for recording. A warning will
show automatically when overlapping
recordings are scheduled. If you plan to
record a programme in your absence,
remember to leave the TV switched to
Standby and the USB Hard Drive switched
on.
You cannot record when you are using
Pause TV.
In terms enforcement of copyright
legislation, some DVB providers can apply
different restriction by means of DRM (Digital
Right Management) technology. In case of
broadcasting protected channels,
recording, record validity or number of
views may be restricted. Recording may be
completely prohibited. In case of trying to
record a protected broadcasting or play back
an expired recording, an error message can
appear.
List of Recordings
Record a Programme
You can view and manage your recordings in
the list of recordings. Next to the list of
recordings, there is a separate list for
scheduled recordings and reminders.
Record Now
To open the list or recordings…
Press  TV GUIDE.
To record the programme you are watching
right now, press  (Record) on the remote
control. The recording will start immediately.
1 - Press the colour key  Recordings .
2 - In the list of recordings, select the
tabs New, Watched or Expired and
To stop the recording, press  (Stop).
29
press OK to filter your view.
3 - With a recording selected in the list, you
can remove the recording with the colour
key  Remove . You can rename a
recording with the colour key  Rename.
To watch a recording…
1 - Press  TV GUIDE.
2 - Press the colour key  Recordings .
3 - In the list of recordings, select the
recording you need and press OK to start
watching.
4 - You can use the
keys  (pause),  (play), 
(rewind),  (fast forward) or  (stop).
5 - To switch back to watch TV,
press  EXIT.
Broadcasters can limit the number of days a
recording can be viewed. When this period
expires, the recording will be marked as
expired. A recording in the list can show the
number of days before it expires.
When a scheduled recording was prevented
by the broadcaster or when the broadcast
was interrupted, a recording is marked
as Failed.
9.2
Pause TV
Manual recording
What You Need
You can schedule a recording that is not
linked to a TV programme. You set the tuner
type, channel and the start and end time
yourself.
To pause a TV programme you need…
• a connected USB Hard Drive formatted on
this TV
• digital TV channels installed on this TV
• to receive channel information for the on
screen TV guide
To schedule a recording manually…
1 - Press  TV GUIDE.
2 - Press the colour key  Recordings .
3 - At the top of the screen,
select  Scheduled and press OK.
4 - Press the colour key  Schedule and
press OK.
5 - Select the tuner from where you want to
record and press OK.
6 - Select the channel to record from and
press OK.
7 - Select the day of the recording and
press OK.
8 - Set the start and end time of the
recording. Select a button and use
the  (up) or  (down) keys to set the
hours and minutes.
9 - Select Schedule and press OK to
schedule the manual recording.
With the USB Hard Drive connected and
formatted, the TV continuously stores the TV
broadcast you are watching. When you
switch to another channel, the broadcast of
the former channel is cleared. Also when
you switch the TV to standby the broadcast
is cleared.
You cannot use Pause TV when you are
recording.
Pause a Programme
To pause and resume a broadcast…
• To pause a broadcast, press  (Pause). A
progress bar at the bottom of the screen
appears briefly.
• To call up the progress bar,
press  (Pause) again.
• To resume watching, press  (Play).
The recording will appear in the list of
scheduled recordings and reminders.
Watch a Recording
30
With the progress bar on screen,
press  (Rewind) or press  (Forward)
to select from where you want to start
viewing the paused broadcast. Press these
keys repeatedly to change speed.
To switch back to the actual TV broadcast,
press  (Stop).
Replay
Since the TV stores the broadcast you are
watching, you can mostly replay the
broadcast for a few seconds.
To replay a current broadcast…
1 - Press  (Pause)
2 - Press  (Rewind). You can
press  repeatedly to select from where
you want to start viewing the paused
broadcast. Press these keys repeatedly to
change speed. At one point you will reach
the start of the broadcast storage or the
maximum time span.
3 - Press  (Play) to watch the broadcast
again.
4 - Press  (Stop) to watch the broadcast
live.
31
menu bar, select a photo thumbnail and
press OK.
• If there are several photos in the same
folder, select a photo and press  Slide
show to start a slide show of all photos in
this folder.
• Watch a photo and press  INFO to
show below:
Progress bar, Playback control bar,  (Jump
to the previous photo in a folder),  (Jump to
the next photo in a folder),  (Start
slideshow playback),  (Pause the
playback),  (Start slideshow),  (Rotate
photo)
10
Videos, Photos
and Music
10.1
From a USB Connection
You can view your photos or play your music
and videos from a connected USB flash drive
or USB Hard Drive.
With the TV switched on, plug in a USB flash
drive or a USB Hard Drive to one of the USB
connections.
Photo Options
Press  SOURCES, then
select  USB, you can browse your files
in folder structure you have organised on the
USB Hard Drive.
With a photo on screen,
press  OPTIONS to…
List/Thumbnails
View photos with list view or thumbnails
view.
Warning
If you try to pause or record a programme
with a USB Hard Drive connected, the TV will
ask you to format the USB Hard Drive. This
formatting will delete all current files on the
USB Hard Drive.
Shuffle off, Shuffle on
View the pictures in sequential order, or at
random.
Repeat, Play once
View the pictures repeatedly or once only.
Slideshow speed
Set the speed of the slideshow.
10.2
Photos
Slideshow transitions
Set the transition from one picture to the
next.
View Photos
1 - Press  SOURCES,
select  USB and press OK.
2 - Select  USB Flash Drive and
press  (right) to select the USB device you
need.
3 - Select Photo, you
can press  Sort to browse your photos
by date, month, year or alphabetically by
name.
4 - Select one of photos, and press OK to
view the selected photo.
• To view photos, select Photos in the
10.3
Videos
Play Videos
To play a video on TV…
Select  Videos , and select the file name
and press OK.
• To pause the video, press OK.
32
Press OK again to continue.
• To rewind or go fast forward,
press  or . Press the keys several times
to speed up - 2x, 4x, 8x, 16x, 32x.
• To jump to the next video in a folder,
press OK to pause and select  on screen
and press OK.
• To stop the video playback,
press  (Stop).
• To go back to the folder, press .
Play videos repeatedly or once.
Open video folder
1 - Press  SOURCES,
select  USB and press OK.
2 - Select  USB Flash Drive and
press  (right) to select the USB device you
need.
3 - Select Videos and select one of video,
you can press OK to play the selected
video.
• Select a video and press  INFO to show
file information.
• Playback a video and press  INFO to
show below:
Progress bar, Playback control
bar,  (Jump to the previous video in a
folder),  (Jump to the next video in a
folder),  (Playback), 
(Rewind),  (Fast forward),  (Pause the
playback),  (Play all/Play
one),  (Shuffle on/Shuffle off)
Open music folder
Video Options
Music Options
During the video playback,
press  OPTIONS to…
Options for playing music...
10.4
Music
Play Music
1 - Press  SOURCES,
select  USB and press OK.
2 - Select  USB Flash Drive and
press  (right) to select the USB device you
need.
3 - Select Music and select one of music,
you can press OK to play the selected
music.
• Select a music and press  INFO to
show file information.
• Playback a music and press  INFO to
show below:
Progress bar, Playback control
bar,  (Jump to the previous music in a
folder),  (Jump to the next music in a
folder),  (Playback), 
(Rewind),  (Fast forward),  (Pause the
playback),  (Play all/Play one)
Repeat, Play once
Play songs repeatedly or once.
Subtitles
Display the subtitles if available,
select On, Off, or On during mute.
Charater set
Select one of system for charater.
Audio language
Play the audio language if available.
Status
Display file information, like sound mode.
Repeat, Play once
33
settings
11
Open TV Setting
Menus
Settings menu:
Press  SETUP key on the remote control
to find frequent settings.
• How to - Instructions on how to install
channels, sort channels, update TV
software, connect external devices and use
Smart functions on your TV.
• Install channels - Update channels or
start a complete new channel installation.
• Picture style - Select one of preset
picture styles for ideal picture viewing.
• Picture format - Select one of preset
picture format which fits the screen.
• Sound style - Select one of preset sound
styles for ideal sound settings.
• Audio out - Set the TV to play the sound
on TV or on the connected audio system.
• Ambilight style* - Select one of preset
Ambilight styles.
• Ambilight+hue* - Switch Ambilight+hue on
or off.
• Sleep timer - Set the TV to switch to
standby automatically after a preset time.
• Screen off - If you only listen to music on
TV, you can switch off the TV screen.
11.1
Home Menu Overview
Press  (Home) to select one of below
menus, then press OK.
Sources
This row contains available sources in this
TV.
Watch TV
This row contains TV functions which are
available for user.
Apps
This row contains number of apps preinstalled.
Search
This row contains an interface to perform the
search within this TV.
• All settings - View all settings menu.
• Help - Diagnose and get more information
about your TV. For more information,
in Help, press the colour
key  Keywords and look up Help
Menu for more information.
Settings
This row contains settings which are
available for user.
You can reorder the icons on Home
menus. To reposition icons, press OK.
Alternatively, you can select the icon you
want to reorder, and hold the OK key for 3
seconds until the arrows appear around the
icon. Use navigation keys to move the
highlighted icon to another location, then
press OK. Press the BACK key to exit.
All settings menu:
Press  (home) key on the remote
control, select Settings > All settings, and
press OK.
* Ambilight setting is only for models which
support Ambilight function.
11.2
Frequent settings and All
34
11.3
settings > Picture >
All Settings
Press the arrows  (up) or  (down) to
adjust the colour saturation value of the
picture.
Picture Settings
Picture Style
Colour
Adjust the picture contrast
 (Home) > Settings > All
settings > Picture > Contrast
Select a style
For easy picture adjustment, you can select
a preset picture style.
Press the arrows  (up) or  (down) to
adjust the contrast value of the picture.
 (Home) > Settings > Picture
style, press OK to change to next available
option.
You can decrease contrast value to reduce
power consumption.
The available Picture styles are ...
• Personal - The picture preferences you
set during the first start up
• Vivid - Ideal for daylight viewing
• Natural - Natural picture settings
• Standard - Most energy conscious setting
• Movie - Ideal for watching movies
• Game - Ideal for gaming*
• Monitor - Ideal for computer monitor
Adjust the picture sharpness
 (Home) > Settings > All
settings > Picture > Sharpness
Press the arrows  (up) or  (down) to
adjust the sharpness value of the picture.
* Picture style - Game is not available for
some video sources.
Adjust the picture brightness
 (Home) > Settings > All
settings > Picture > Brightness
Custom a style
You can adjust and stored picture settings in
in the currently selected picture style,
like Colour, Contrast or Sharpness.
Press the arrows  (up) or  (down) to
set the level of brightness of the picture
signal.
Restore a style
Note: Setting of brightness much away from
reference value (50) may result lower
contrast.
To restore the style to its original setting, go
to  (Home) > Settings > All
settings > Picture > Picture style, then
press  Restore style.
Expert mode picture settings
Colour, Contrast, Sharpness, Brightness
Colour Settings
Adjust the picture colour
 (Home) > Settings > All
settings > Picture > Expert mode settings
 (Home) > Settings > All
35
settings >
Adjust the tint seting
 (Home) > Settings > All
settings > Picture > Expert mode
settings > Tint
Contrast mode
Select Normal, Optimized for
picture, Optimized for energy saving to set
the TV automatically reduces the contrast,
for best power consumption or for best
picture experience, or select Off to switch
off the adjustment.
Press the arrows  (up) or  (down) to
adjust the value of tint setting.
Adjust the colour enhancement
Dynamic Contrast
 (Home) > Settings > All
settings > Picture > Expert mode
settings > Colour enhancement
 (Home) > Settings > All
settings > Picture > Expert mode
settings > Dynamic contrast
Select
Maximum, Medium, or Minimum to set
the level of the colour intensity and the
details in bright colours.
Select Maximum, Medium,
or Minimum to set the level at which the
TV automatically enhances the details in the
dark, middle and light areas of the picture.
Select the preset colour temperature
 (Home) > Settings > All
settings > Picture > Expert mode
settings > Colour temperature
Video Contrast, Gamma
Video contrast
Select Normal, Warm, or Cool to set the
colour temperature for your preference.
 (Home) > Settings > All
settings > Picture > Expert mode
settings > Video contrast
Press the arrows  (up) or  (down) to
adjust the video contrast level.
Customise colour temperature
 (Home) > Settings > All
settings > Picture > Expert mode
settings > Colour temperature > Custom
colour temperature
Gamma
 (Home) > Settings > All
settings > Picture > Expert mode
settings > Gamma
Select Custom in Colour temperature me
nu to customise a colour temperature
yourself. Press the arrows  (up)
or  (down) to adjust the value.
Press the arrows  (up) or  (down) to
set a non-linear setting for picture luminance
and contrast.
Contrast Settings
Contrast Modes
Super resolution
 (Home) > Settings > All
settings > Picture > Expert mode
 (Home) > Settings > All
settings > Picture > Expert mode
36
settings > Super resolution
for PC input. Some extreme picture formats
can still show black bars.
• Fit to screen – automatically zooms in the
picture to fill the screen without distortion.
Black bars may be visible. Not supported for
PC input.
Select On to have a superior sharpness in
line edges and details.
Picture Clean
Noise reduction
• Original – shows the original format of the
incoming picture.
 (Home) > Settings > All
settings > Picture > Expert mode
settings > Noise reduction
 (Home) > Settings > All
settings > Picture > Picture format >
Advanced
Select Maximum, Medium,
Minimum to set the level for removing the
noise in video content.
Noise is mostly visible as small moving dots
in on-screen picture.
To format the picture manually…
• Shift – select on the arrows to shift the
picture. You can only shift the picture when it
is zoomed in.
• Zoom – select on the arrows to zoom in.
• Stretch – select on the arrows to stretch
the picture vertically or horizontally.
• Undo – select to return to the picture
format you started with.
MPEG Artefact Reduction
 (Home) > Settings > All
settings > Picture > Expert mode
settings > MPEG Artefact Reduction
Quick Picture Settings
Select Maximum, Medium, Minimum to
have different degress of smoothing the
artefects in digital video content.
MPEG artefacts are mostly visible as small
blocks or jagged edges in on-screen images.
 (Home) > Settings > All
settings > Picture > Quick picture settings
• During the first installation, you did some
picture settings in a few easy steps. You can
redo these steps with Quick picture settings
menu.
• Select the picture setting you prefer and go
to the next setting.
• To do these steps, make sure the TV can
tune to a TV channel or can show a
programme from a connected device.
Picture Format
 (Home) > Settings > All
settings > Picture > Picture format
If the picture is not filling the whole screen, if
black bars are showing on the top or bottom
or at both sides, you can adjust the picture
to fill the screen completely.
Sound Settings
To select one of the basic settings to fill the
screen…
Sound Style
• Wide screen – automatically zooms in the
picture to wide screen.
• Fill screen – automatically enlarges the
picture to fill the screen. Picture distortion is
minimal, subtitles remain visible. Not suitable
Select a style
For easy sound adjustment, you can select a
preset sound style.
37
 (Home) > Settings > All
settings > Sound > Sound style
settings > Equalizer
Press the arrows  (up) or  (down) to
adjust the equalizer settings.
The available sound styles are ...
• Original - Most neutral sound setting
• Movie - Ideal for watching movies
• Music - Ideal for listening to music
• Game - Ideal for gaming
• News - Ideal for speech
• Expert mode - Select to check more
advanced sound settings
TV Placement
 (Home) > Settings > All
settings > Sound > TV placement
Select On a TV stand or On the wall to
have best sound reproduction according to
the setting.
Custom a style
You can adjust and stored sound settings in
the currently selected sound style.
Restore a style
Advanced sound settings
To restore the style to its original setting,
select back to Sound style, then
press  Restore style.
Volume Control
Auto volume
 (Home) > Settings > All
settings > Sound > Advanced > Auto
volume
Expert mode sound settings
Select AVL to automatically level out
sudden volume differences. Typically when
you are switching channels. Select Night
mode for a more comfortable quiet listening
experience.
Dynamic surround
 (Home) > Settings > All
settings > Sound > Expert mode
settings > Dynamic surround
Set the surround sound effect level for the
internal TV speakers.
Delta volume
 (Home) > Settings > All
settings > Sound > Advanced >
volume
Clear dialogue
 (Home) > Settings > All
settings > Sound > Expert mode
settings > Clear dialogue
Delta
Press the arrows  (up) or  (down) to
adjust the delta value for TV speaker volume.
Select On to improve the sound for speech.
Ideal for news programmes.
Audio Out Settings
 (Home) > Settings > All
settings > Sound > Advanced >
out
Equalizer
 (Home) > Settings > All
settings > Sound > Expert mode
38
Audio
Set the TV to play the sound on TV or on the
connected audio system.
Digital out levelling
You can select where you want to hear the
TV sound and how you want to control it.
 (Home) > Settings > All
settings > Sound > Advanced >
out levelling
• If you select TV speakers off, you
permanently switch off the TV speakers.
• If you select TV speakers, the TV speakers
are always on.
Adjust the loudness level from device which
is connected to digital audio output (SPDIF)
or HDMI.
Digital
• Select More to have louder volume.
• Select Less to have softer volume.
With an audio device connected with HDMI
CEC, select HDMI sound system. The TV
will switch off the TV speakers when the
device is playing the sound.
Digital out delay
 (Home) > Settings > All
settings > Sound > Advanced >
out delay
Digital Output Settings
Digital output settings are available for
SPDIF output (optical) and HDMI ARC sound
signals.
For some Home Theatre Systems you might
need to adjust the audio sync delay to
synchronise the audio to the
video. Select Off if a sound delay is set on
your Home Theatre System.
Digital out fomat
 (Home) > Settings > All
settings > Sound > Advanced >
out format
Digital
Digital
Digital out offset (Only available
when Digital out delay set to On)
Set the audio out signal of the TV to fit the
sound capabilities of the connected Home
Theatre System.
 (Home) > Settings > All
settings > Sound > Advanced >
out offset
• Stereo: If your audio playback devices have
no multichannel sound processing, select to
only output stereo content to your audio
playback devices.
• Multichannel: Select to only output 5.1
audio content (compressed multichannel
sound signal) to your audio playback
devices.
• Dolby Digital Plus: Select to output Dolby
Digital Plus or DTS content to your audio
playback devices or Home theatre system.
Digital
• If you cannot set a delay on the Home
Theatre System, you can set the TV to sync
the sound.
• You can set an offset that compensates for
the time necessary for the Home Theatre
System to process the sound of the TV
picture.
• You can set the value in steps of 5ms.
Maximum setting is 60ms.
- Make sure your audio playback devices
support Dolby Atmos feature.
Channels
- SPDIF output (DIGITAL AUDIO OUT) will
be disabled when streaming Dolby Digital
Plus content.
TV Guide
 (Home) > Settings > All
Settings > Channels > TV guide
39
The TV Guide receives information (data)
from broadcasters. In some regions and for
some channels, TV Guide information might
not be available. The TV can collect TV
Guide information for the channels that are
installed on the TV. The TV cannot collect
the TV Guide information from channels
viewed from a digital receiver or decoder.
HDMI-CEC Connection - EasyLink
Connect HDMI CEC-compatible devices to
your TV, you can operate them with the TV
remote control. EasyLink HDMI CEC must
be switched on on the TV and the connected
device.
• The TV comes with the information set
to From the broadcaster.
General Settings
Connection Related Settings
Format USB Hard Drive
Switch on EasyLink
 (Home) > Settings > All
settings > General settings > Format SB
Hard Drive
 (Home) > Settings > All
settings > General
settings > EasyLink > EasyLink >
You need to set up and format a USB Hard
Drive before you record a channel.
Operate HDMI CEC-compatible devices
On
with TV remote control
 (Home) > Settings > All
settings > General
settings > EasyLink > EasyLink remote
control > On
USB Keyboard Settings
 (Home) > Settings > All
settings > General settings >
keyboard settings
USB
To install the USB keyboard, switch on the
TV and connect the USB keyboard to one of
the USB connections on the TV. When the
TV detects the keyboard for the first time,
you can select your keyboard lay-out and
test your selection.
Note:
- EasyLink might not work with devices from
other brands.
- The HDMI CEC functionality has different
names on different brands. Some examples
are: Anynet, Aquos Link, Bravia Theatre
Sync, Kuro Link, Simplink and Viera Link. Not
all brands are fully compatible with
EasyLink. Example HDMI CEC branding
names are property of their respective
owners.
Mouse Settings
 (Home) > Settings > All
settings > General settings >
settings
Mouse
Adjust the motion speed of the USB mouse.
Eco Settings
40
 (Home) > Settings > All
Set energy saving level
 (Home) > Settings > All
settings > General settings >
settings > Energy saving
settings > General settings > Location
• Select the location of your TV
• Select Shop, the picture style is switched
back to Vivid, and can adjust shop settings.
• Shop mode is for in-store promotion.
Eco
Select Minimium, Medium,
or Maximium to have different degress
for energy saving, or select Off to switch
off energy saving mode.
Shop Setup
 (Home) > Settings > All
settings > General settings >
Set screen off to save energy
consumption
 (Home) > Settings > All
settings > General settings >
settings > Screen off
If the TV is set to Shop, you can view
feature logos or set the availablility of a
specific demo for in store use.
Eco
Select Screen off, the TV screen is switched
off, to switch the TV screen back on, press
any key on the remote control.
Adjust Picture and audio
 (Home) > Settings > All
settings > General settings >
setup > Picture and audio
Set TV switch off timer
 (Home) > Settings > All
settings > General settings >
settings > Switch off timer
Shop setup
Shop
Select Optimized to shop or Custom settings
for picture and audio settings.
Eco
Logos and banner
Press the arrows  (up) or  (down) to
adjust the value. The value 0 (Off)
deactivates the automatic switch off.
 (Home) > Settings > All
settings > General settings >
setup > Logos and banner
Select Switch off timer, the TV switches off
automatically to save energy.
Shop
• TV switches off if receiving a TV signal but
you don't press a key on the remote control
during a 4 hour period.
• TV switches off if not receiving a TV signal
nor a remote control command for 10
minutes.
• If you use the TV as a monitor or use a
digital receiver to watch TV (a Set-Top Box STB) and you do not use the remote control
of the TV, you should deactivate this
automatic switch off, to set the value to 0.
Set to display Feature logos and
Promotional banner.
Location - Home or Shop
Reset TV Settings and Reinstall TV
Demo Me autostart
 (Home) > Settings > All
settings > General settings >
setup > Demo Me autostart
Shop
Turn On/Off the Demo Me autostart.
41
Reset all settings value to original TV
settings
 (Home) > Settings > All
settings > General settings >
settings
Set subtitle preference language
 (Home) > Settings > All
settings > Region and
language > Language > Primary
subtitle, Secondary subtitle
Factory
Redo full TV installation , and set TV status
Digital channels can offer several subtitle
languages for a programme. You can set a
preferred primary and secondary subtitle
language. If subtitles in one of these
languages are available, the TV will show the
subtitles you selected.
back to the first time you switch on
 (Home) > Settings > All
settings > General settings >
Reinstall TV
Enter PIN code and select Yes, the TV will
reinstall completely. All settings will be reset
and installed channels will be replaced. The
installation can take a few minute
Set teletex preference language
 (Home) > Settings > All
settings > Region and
language > Language > Primary
text, Secondary text
Region and Language Settings
Some digital TV broadcasters have several
Text languages available.
Language
 (Home) > Settings > All
settings > Region and
language > Language
Clock
 (Home) > Settings > All
settings > Region and language >
Change the language of the TV menu and
Clock
messages
 (Home) > Settings > All
settings > Region and
language > Language > Menu language
Correct clock automatically
 (Home) > Settings > All
settings > Region and
language > Clock > Auto clock mode
Set audio preference language
• The standard setting for the TV clock
is Automatic. The time information comes
from the broadcasted UTC - Coordinated
Universal Time information.
• If the clock is not correct, you can set the
TV clock to Country dependent.
• When select Country dependent, you can
set the time for Automatic, Standard time, or
Daylight saving time.
 (Home) > Settings > All
settings > Region and
language > Language > Primary audio,
Secondary audio
Digital TV channels can broadcast audio with
several spoken languages for a programme.
You can set a preferred primary and
secondary audio language. If audio in one of
these languages is available, the TV will
switch to this audio.
42
Correct clock manually
 (Home) > Settings > All
settings > Universal access
 (Home) > Settings > All
settings > Region and
language > Clock > Auto clock
mode > Manual
With Universal Access switched on, the TV
is prepared for use for the deaf, hard of
hearing, blind or partially sighted people.
 (Home) > Settings > All
settings > Region and
language > Clock > Date, Time
Switch on universal access settings
 (Home) > Settings > All
settings > Universal access >
access > On.
Go to previous menu, and
select Date and Time to adjust the value.
Universal
Note:
• If none of the automatic settings display
the time correctly, you can set the time
manually.
• If you schedule recordings from the TV
Guide, we recommend not to change the
time and date manually.
Universal access for hearing impaired
people
 (Home) > Settings > All
settings > Universal access >
impaired > On
Hearing
• Some digital TV channels broadcast special
audio and subtitles adapted for the hard of
hearing or deaf people.
• Switched on, the TV automatically switches
to the adapted audio and subtitles, if
available.
Set time zone or set a time offset for your
region
 (Home) > Settings > All
settings > Region and
language > Clock > Time zone
Select one of the time zones.
Universal access for blind or partially
sighted people
Set the TV to switch to Standby
 (Home) > Settings > All
settings > Universal access > Audio
description > Audio description > On
automatically after a preset time
 (Home) > Settings > All
settings > Region and
language > Clock > Sleep timer.
Digital TV channels can broadcast special
audio commentary describing what is
happening on screen.
Set the TV to switch to Standby
automatically after a preset time. With the
slider bar you can set the time to up to 180
minutes in increments of 5 minutes. If set to
0 minutes, the sleep timer is switched off.
You can always switch off your TV earlier or
reset the time during the countdown
 (Home) > Settings > All
settings > Universal access > Audio
description > Audio description > Mixed
volume, Audio effects, Speech
• Select Mixed volume, you can mix the
volume of the normal audio with the audio
commentary. Press the arrows  (up)
or  (down) to adjust the value.
• Set Audio effect to On for extra audio
effects in the commentary audio, like stereo
Universal Access Settings
43
or fading sound.
• Select Speech to set speech
preference, Descriptive or Subtitles.
Lock Settings
Set Code and Change Code
 (Home) > Settings > All
settings > Child lock > Set code, Change
code
Set new code or reset change code. The
child lock code is used to lock or unlock
channels or programmes.
Note: If you forgot your PIN code, you can
override the current code use 8888 and
enter a new code.
Lock for Programme
 (Home) > Settings > All
settings > Child lock >
Parental rating
Set a minumum age to watch rated
programmes.
44
 (Home) > Settings > All
settings > Network > Connect to
network > Wireless
12
Network
1 - In the list of found networks, select on
your wireless network. If your network is not
in the list because the network name is
hidden (you switched off the SSID broadcast
of the router), select Add New Network to
enter the network name yourself.
2 - Depending on the type of router, enter
your encryption key - WEP, WPA or WPA2. If
you entered the encryption key for this
network before, you can select OK to make
the connection immediately.
3 - A message will be shown when the
connection is successful.
12.1
Home Network
To enjoy the full capabilities of your Philips
Smart TV, your TV must be connected to the
Internet.
Connect the TV to a home network with a
high-speed Internet connection. You can
connect your TV wirelessly or wired to your
network router.
12.2
Make the Connection - WPS
Connect to Network
 (Home) > Settings > All
settings > Network > Connect to
network > WPS
Wireless Connection
If your router has WPS, you can directly
connect to the router without scanning for
networks. If you have devices in your
wireless network that use the WEP security
encryption system, you cannot use WPS.
What You Need
To connect the TV to the Internet wirelessly,
you need a Wi-Fi router with a connection to
the Internet. Use a high-speed (broadband)
connection to the Internet.
1 - Go to the router, press the WPS button
and return to the TV within 2 minutes.
2 - Select Connect to make the
connection.
3 - A message will be shown when the
connection is successful.
Make the Connection - WPS with PIN
Code
Turn Wi-Fi On or Off
 (Home) > Settings > All
settings > Network > Connect to
network > WPS with PIN Code
 (Home) > Settings > All settings
> Network > Wi-Fi On/Off
If your router has WPS with a PIN code, you
can directly connect to the router without
scanning for networks. If you have devices in
your wireless network that use the WEP
security encryption system, you cannot use
WPS.
Make the Connection
Make the Connection - Wireless
45
1 - Write down the 8-digit PIN code shown
on screen and enter it in the router software
on your PC. Consult the router manual on
where to enter the PIN code in the router
software.
2 - Select Connect to make the
connection.
3 - A message will be shown when the
connection is successful.
settings > Network >
settings
View network
You can view all current network settings
here. The IP and MAC address, signal
strength, speed, encryption method, etc.
Network Configuration - Static IP
 (Home) > Settings > All
settings > Network > Network
Configuration > Static IP
Wired Connection
If you are an advanced user and want to
install your network with Static IP
addressing, set the TV to Static IP.
What You Need
To connect the TV to the Internet, you need
a network router with a connection to the
Internet. Use a high-speed (broadband)
connection to the Internet.
Network Configuration - Static IP
Configuration
 (Home) > Settings > All
settings > Network > Static IP
configuration
Make the Connection
 (Home) > Settings > All
settings > Network > Connect to
network > Wired
1 - Select Static IP configuration and
configure the connection.
2 - You can set the number for IP
Address, Netmask, Gateway, DNS 1,
or DNS 2.
1 - Connect the router to the TV with a
network cable (Ethernet cable**).
2 - Make sure that the router is switched on.
3 - The TV constantly searches for the
network connection.
4 - A message will be shown when the
connection is successful.
Switch On with Wi-Fi (WoWLAN)
 (Home) > Settings > All
settings > Network > Switch On with WiFi (WoWLAN)
If the connection fails, you can check the
DHCP setting of the router. DHCP should be
switched on.
You can switch this TV on from your
smartphone or tablet if the TV is in Standby.
The setting Switch On with Wi-Fi
(WoWLAN) must be switched on.
**To fulfill EMC regulations, use
a shielded FTP Cat. 5E Ethernet cable.
12.3
Digital Media Renderer - DMR
Network Settings
 (Home) > Settings > All
settings > Network > Digital Media
Renderer - DMR
View Network Settings
 (Home) > Settings > All
If your media files do not play on your TV,
46
make sure that the Digitial Media Renderer is
switched on. As a factory setting, DMR is
switched on.
bookmarks and history. Interactive MHEG
applications can also save so-called
'cookies', on your TV. These files will also be
cleared.
Switch on Wi-Fi connection
 (Home) > Settings > All
settings > Network > Wi-Fi On/Off
You can switch on or off Wi-Fi connection
on your TV.
Reset Wi-Fi Miracast connection
 (Home) > Settings > All
settings > Network > Reset Wi-Fi
Miracast connection
Clear the list of connected and blocked
devices that are used with Miracast.
TV network name
 (Home) > Settings > All
settings > Network > TV network name
If you have more than one TV in your home
network, you can give the TV a unique name.
Netflix settings
 (Home) > Settings > All
settings > Network > Netflix settings
With Netflix settings, you can view ESN
number or deactive Netflix device.
Clear Internet Memory
 (Home) > Settings > All
settings > Network > Clear Internet
Memory
With Clear Internet Memory you clear your
Philips server registration and parental rating
settings, your video store app logins, all
Philips App Gallery favourites, Internet
47
The Internet App opens the World Wide Web
on your TV.
On your TV, you can view any Internet
website but most of them are not tailored for
a TV screen.
- Some plug-ins (e.g. to view pages or
videos) are not available on your TV.
- Internet pages are shown one page at a
time and full screen.
13
Smart TV
13.1
Setup Smart TV
The first time you open Smart TV, you need
to configure your connection. Read and
agree to the terms and conditions to
continue.
13.3
App Gallery
The Smart TV start page is your link to the
Internet. You can rent movies online, read
newspapers, watch videos and listen to
music, also shop online, or watch TV
programmes when it suits you with On-line
TV.
Open the App Gallery in Smart TV to
browse the Apps, the collection of tailored
websites for TV.
Find the App for YouTube videos, a national
newspaper, an online photo album, etc.
There are Apps to rent a video from an
online video store and Apps for watching
programmes you missed. If the App gallery
does not hold what you are looking for, try
the World Wide Web and surf the Internet on
TV.
Open Smart TV
To open the Smart TV start page,
press  Smart TV .
Alternatively, you can press  (Home) >
Apps, select  Smart TV and press OK.
The TV connects to the Internet and opens
the Smart TV start page. This may take a few
seconds.
Search
With Search, you can search the App Gallery
for relevant Apps.
Enter a keyword in the text field,
select  and press OK to start searching.
You can enter names, titles, genres and
description keywords to search.
Alternatively, you can leave the text field
empty and search for the most popular
searches/keywords for a range of categories.
In the list of found keywords, select a
keyword and press OK to search for items
with that keyword.
Close Smart TV
To close the Smart TV start page,
press EXIT.
TP Vision Europe B.V. bears no
responsibility regarding the content and the
quality of the content provided by the
content service providers.
13.2
Smart TV Start Page
Your Apps
You start Apps from the Smart TV start page.
Internet
48
14
Netflix
If you have a Netflix menbership
subscription, you can enjoy Netflix on this
TV. Your TV must be connected to the
Internet.
To open Netflix, press  to open the
Netflix App. You can open Netflix
immediately from a TV in standby.
www.netflix.com
49
15
Environmental
15.1
End of Use
Please find out for yourself about the local
rules on separate collection of batteries
because correct disposal will help to prevent
negative consequences for the environment
and human health.
Disposal of your old product and batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
15.2
E-Waste Declaration for India
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European
Directive 2012/19/EU.
This symbol on the product or on its
pagkaging indicates that this product must
not be disposed of with your other
household waste. Instead it is your
responsibility to dispose of your waste
equipment by handing it over to a
designated collection point for the recycling
of waste electrical and electronic equipment.
The separate collection and recycling of
your waste equipment at the time of
disposal will help to conserve natural
resources and ensure that it is recycled in a
manner that protects human health and the
environment. For more information about Ewaste, please visit
http://www.india.philips.com/about/sustain
ability/recycling/index.page and to know
where you can drop off your waste
equipmet for recycling in India, please
contact on below given cintact details.
Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with
your normal household waste. Correct
disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.
Helpline number: 1800-425-6396 (Monday
to Saturday, 9 am to 5:30 pm)
50
To reset the television to Star rating qualified
settings, select 'Home' mode from the initial
set-up procedure in 'factory settings' under
the 'Set-up' menu.
15.3
Restriction on Hazardous
Substances statement
LED TV*
This product complies with the "E-Waste
(Management) Rules, 2016" CHAPTER V, rule
16, sub-rule (1) . Whereas New Electrical and
Electronic Equipment and their components
or consumables or parts or spares do not
contain Lead, Mercury, Cadmium,
Hexavalent Chromium, polybrominated
biphenyls and polybrominated diphenyl
ethers beyond a maximum concentration
value of 0.1% by weight in homogenous
materials for lead, mercury, hexavalent
chromium, polybrominated biphenyls and
polybrominated diphenyl ethers and of
0.01% by weight in homogenous materials
for cadmium. except of exemptions set in
Schedule 2 of the Rule.
* Disclaimer
PHILIPS LED TV applies LCD screen with
LED backlights.
15.4
BEE Energy star
Below sentence is not applicable for above
1920x1080 resolution TV models.
ATTENTION
This product is qualified for the BEE Star
rating in the 'Home' Mode. The Objectives of
Star Labeling Program is designed to
promote energy efficient products and
practices.
When the television is initially set up, it is
designed to meet the BEE Star Labeling
requirements while maintaining optimum
picture quality.
• Changes to certain functionalities of this
television (TV Guide, Picture/sound etc.)
may change the power consumption.
• Depending upon such changed setting (eg.,
Retail mode), the power consumption may
vary which possibly could exceed the stated
energy consumption.
51
16
16.4
Specifications
Supported Input Resolution Video
16.1
Support Timing
Power
Video support timing also includes
field/frame rate 23.976Hz, 29.97Hz and
59.94Hz.
Product specifications are subject to change
without notice. For more specification details
of this product,
see www.philips.com/TVsupport
Power
• Mains power : AC 110-240V +/-10%
• Ambient temperature : 5°C to 35°C
HDMI
• 480i - 60Hz
• 480p - 60Hz
• 576i - 50Hz
• 576p - 50Hz
• 720p - 50Hz, 60Hz
• 1080i - 50Hz, 60Hz
• 1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
When test standby power consumption,
Wake-On-Lan(WoWLAN) must be turned
off.
16.2
Reception
Component, Composite
• Aerial input : 75 ohm coaxial (IEC75)
• Tuner bands : Hyperband, S-Channel,
UHF, VHF
• DVB : DVB-T2, DVB-C (cable) QAM
• Analogue video playback : SECAM, PAL
• Digital video playback : MPEG2 SD/HD
(ISO/IEC 13818-2), MPEG4 SD/HD (ISO/IEC
14496-10)
• Digital audio playback (ISO/IEC 13818-3)
Composite
• PAL, NTSC, SECAM
Component
• 480i - 60Hz
• 480p - 60Hz
• 576i - 50Hz
• 576p - 50Hz
• 720p - 50Hz, 60Hz
• 1080i - 50Hz, 60Hz
• 1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
16.3
Display Resolution
16.5
Diagonal screen size
• 32PHT5813 : 80 cm / 32 inch
• 43PFT5813 : 108 cm / 43 inch
Supported Input Resolution Computer
Display resolution
• 1366 x 768 (For HD)
• 1920 x 1080 (For FHD)
• 640 x 480 - 60Hz
• 800 x 600 - 60Hz
• 1024 x 768 - 60Hz
52
• 1280 x 800 - 60Hz
• 1280 x 960 - 60Hz
• 1280 x 1024 - 60Hz
• 1366 x 768 - 60Hz
• 1440 x 900 - 60Hz
• 1920 x 1080 - 60Hz
Performance may vary, depending on the
capabilities of the mobile device and the
software used.
16.6
Sound
• Dynamic Surround
• Clear Dialogue
• Smart Sound
• 5 Band Equalizer
• Output power (RMS) : 20W
• Dolby® Audio
• DTS-HD (M6)
16.7
Multimedia
Connections
• USB 2.0
• Ethernet LAN RJ-45
• Wi-Fi 802.11n (built-in)
Supported USB file systems
• FAT, NTFS
Playback formats
• Video Codec : AVI, MKV, HEVC,
H.264/MPEG-4 AVC, MPEG1, MPEG2,
MPEG4, HEVC
• Audio Codec : MP3, WAV, AAC, WMA (v2
up to v9.2), WMA-PRO (v9 and v10)
• Subtitles :
- Format: SRT, SMI, SSA, SUB, ASS, TXT
- Character encodings : UTF-8, Central
Europe and Eastern Europe
(Windows-1250), Cyrillic (Windows-1251),
Greek (Windows-1253), Turkish
(Windows-1254), Western Europe
(Windows-1252)
• Image Codec : JPEG, GIF, PNG, BMP
Wi-Fi Certified
This TV supports Miracast certified devices.
53
relevant Help page from your computer.
To download the Help (user manual) go
to www.philips.com/TVsupport
17
Troubleshooting
17.1
17.2
Tips
Switch On
If you can't find a solution for your TV
problem in Troubleshooting, you can
use  Keywords in Help > User manual to
find the information you are looking for.
Select a keyword to go the most relevant
page in the User manual.
The TV does not switch on
• Disconnect the power cable from the
power outlet. Wait for one minute then
reconnect it. Make sure that the power cable
is securely connected. Try switching on
again.
• Connect the TV to another wall mains
socket and try switching on.
• Disconnect all connected devices from the
TV and try switching on.
• If the standby light on TV is on, the TV
might not respond to the remote control.
If the User manual doen't answer your
question, you can go to the support website
of Philips.
To solve any Philips TV related problem, you
can consult our online support. You can
select your language and enter your product
model number.
Creaking sound at startup or switch off
Go to www.philips.com/TVsupport.
When you are turning the TV on or standby,
you hear a creaking sound from the TV
chassis. The creaking sound is due to the
normal expansion and contraction of the TV
as it cools and warms up. This does not
affect performance.
On the support site you can find your
country's telephone number to contact us as
well as answers to frequently asked
questions (FAQs). In some countries, you
can chat with one of our collaborators and
ask your question directly or send a question
by email.
You can download new TV software or the
manual to read on your computer.
The TV goes back to standby after showing
the Philips startup screen
When the TV is in standby, a Philips startup
screen is displayed, then the TV returns to
standby mode. This is normal behaviour.
When the TV is disconnected and
reconnected to the power supply, the
startup screen is displayed at the next
startup. To switch on the TV from standby,
press  (Standby / On) the remote
control or the TV.
For more TV troubleshooting and frequently
asked questions (FAQs)...
Go
to http://philips-tvconsumercare.kxondema
nd.com/portal/en/ModelSelect
TV Help on your tablet, smartphone or
computer
The standby light keeps on blinking
To carry out extended sequences of
instructions more easily, you can download
the TV Help in PDF format to read on your
smartphone, tablet or
computer. Alternatively, you can print the
Disconnect the power cable from the power
outlet. Wait 5 minutes before you reconnect
the power cable. If the blinking reoccurs,
contact Philips TV Consumer Care.
In Help > User manual, press the colour
key  Keywords and look up Contact
54
Info.
installation
• Check if the TV was connected with an
antenna. Check the cable connections.
• Check if you selected the correct DVB
(Digital Video Broadcast) system. Select DVBT (terrestrial) when you use an antenna or
common antenna.
• Redo the installation and select Digital
and analogue channels during the
installation.
Some channels disappeared, cannot find all
TV switches off by itself
If the TV switches off suddenly, the
setting Switch off timer might be switched
on. With Switch off timer the TV switches
off after 4 hours if no remote control signals
were received. To avoid this automatic
switch off, you can deactivate this switch off.
In Help > User manual, press the colour
key  Keywords and look up Switch Off
Timer.
Also, if the TV does not receive a TV signal
nor a remote control command for 10
minutes, the TV switches off automatically.
or some previously installed channels
• Check if you selected the correct Channel
list or Favourites list you normally use.
• Some channels might be moved or even
deleted by the broadcaster. In the normal
channels list, try to search for the channel
you're missing. If the channel is still
available, you can put it back in
the favourites list.
• A channel can be deleted from
the channel list during Automatic channel
update. These automatic updates are done
overnight if the TV is on standby.
Channels that do not exist anymore are
deleted and new channels will be added to
the channel list. Exceptionally, a channel
can be deleted because the TV could not
find it while checking for its presence. It
might not broadcast at night.
To avoid channels being deleted during
the Automatic channel update because the
TV could not find them although these
channels are still there, you can switch
off Automatic channel update.
 (Home) > Settings > All Settings >
Channels > Antenna/cable
installlation > Automatic channel update
17.3
Remote Control
TV does not respond to the remote
control
• The TV requires some time to start up.
During this time, the TV does not respond to
the remote control or TV controls. This is
normal behaviour.
• The batteries of the remote control might
be empty. Replace the batteries with new
ones.
17.4
Channels
No digital channels found during the
installation
• Check if the TV was connected with an
antenna or is using a provider signal. Check
the cable connections.
• Check if the country where you install the
TV, has digital channels available.
• Check if you selected the correct DVB
(Digital Video Broadcast) system.
• Redo the installation and check if you
select the correct country.
No analogue channels found during the
DVB-T2 HEVC channel
• See the technical specifications to make
sure that your TV supports DVB-T2 HEVC in
your country and reinstall DVB-T channel.
17.5
Picture
No picture / distorted picture
55
• Check if the TV is connected with an
antenna or is using a provider signal. Check
the cable connections.
• Check if the correct source/input is
selected in the sources menu.
Press  Sources and select the
source/input you need.
• Check if the the external device or source
is properly connected.
• Check if the reception is poor.
• Check if the picture is set to a minimal
value. Select Picture style and select a
style and press OK.
 (Home) > Settings > All
settings > Picture > Picture style
• To check if the TV is broken, try to play a
video clip. Press  Settings > Help >
Check the TV.
If the video clip stays black, call Philips. Wait
until the clip ends and select Contact
info in the Help menu. Call the telephone
number for your country.
devices, neon lights, high buildings and other
large objects can influence reception quality
when you are using an antenna. Try to
improve the reception by changing the
antenna direction or moving devices away
from the TV. Bad weather might deteriorate
the reception.
• Check if all connections, to and from your
devices, are properly connected.
• If reception on only one channel is poor,
fine-tune this channel with Analogue:
manual installation. (Only for analogue
channels)
 (Home) > Settings > Install
Channels > Antenna/cable
installlation > Analogue: manual
installation
• Check if the incoming digital signal is
sufficiently strong. While watching a digital
channel, press  OPTIONS and
select Status and press OK. Check
the Signal strenght and Signal quality.
Sound but no picture
• Change to other video sources and then
change back to current source.
• Select Picture style and select a style and
press OK.
 (Home) > Settings > All
settings > Picture > Picture style
• Restore picture style, select back
to Picture style, then press  Restore
style.
• Reset all TV settings, go
to  (Home) > Settings > All
settings > General settings > Reinstall TV.
• Check the connections of the source/input
devices.
Poor picture from a device
• Make sure that the device is connected
properly. Make sure that the device's output
video setting is the highest possible
resolution if applicable.
• Restore picture style or change to another
picture style.
Picture settings change after a while
Make sure that Location is set to Home .
You can change and save settings in this
mode.
 (Home) > Settings > All
settings > General settings > Location
A banner appears
Poor reception
If an on screen promotion banner appears
occasionally or the Picture style
automatically switches back to Vivid at
startup, the TV is in Shop location. Set the TV
to Home location for use at home.
 (Home) > Settings > All
settings > General settings > Location
If the TV picture is distorted or variable in
quality, the input signal might be poor. A
weak digital signal is seen as a picture that is
breaking up in square blocks and freezes
occasionally. Much sooner than a bad
analogue signal, a bad digital signal will fall
away.
Picture does not fit the screen / Wrong or
unstable picture size / Picture position is
• Check if the antenna cable is properly
connected.
• Large loudspeakers, unearthed audio
incorrect
56
• If the picture size - its aspect ratio - does
not fit the screen, with black bars on the top
and bottom or left and right side of the
screen, press  Picture Format > Fill
screen.
• If the picture size changes all the
time, press  Picture Format > Fit to
screen.
• If the position of the picture is incorrect on
the screen, try to check the signal resolution
and output type of the connected device,
press  Picture Format > Original.
settings > Sound >
out format
Advanced > Digital
17.7
HDMI
HDMI
• Note that HDCP (High-bandwidth Digital
Content Protection) support can delay the
time taken for a TV to display content from
an HDMI device.
• If the TV does not recognise the HDMI
device and no picture is displayed, switch
the source from one device to another and
back again.
• If there are intermittent sound disruptions,
make sure that output settings from the
HDMI device are correct.
Computer picture is not stable
Make sure that your PC uses the supported
resolution and refresh rate.
17.6
Sound
HDMI EasyLink does not work
• Check if your HDMI devices are HDMI-CEC
compatible. EasyLink features only work
with devices that are HDMI-CEC compatible.
No sound or poor sound quality
• Check if the sound settings of the TV are
OK, press the  volume or  mute key.
• If you use a digital receiver (set-top box),
check if the volume on this receiver is not set
to zero or mute.
• Check if the TV - the audio signal - is
properly connected with the Home Theatre
System, if you use such a system for the TV
sound. Check if you connected the HDMI
cable to an HDMI1 ARC connection on the
Home Theatre System.
• Make sure that the TV audio output is
connected to the audio input on the Home
Theatre System.
Sound should be heard from the HTS (Home
Theatre System) speakers.
No volume icon shown
• When an HDMI-CEC audio device is
connected and you use the TV Remote
Control to adjust the volume level from the
device, this behaviour is normal.
17.8
USB
Photos, videos and music from a USB device
do not show
• Check if the USB storage device is set to
Mass Storage Class compliant, as described
in the storage device's documentation.
• Check if the USB storage device is
compatible with the TV.
• Check if the audio and picture file formats
are supported by the TV. For more
information, in Help, press the colour
key  Keywords and look
up Multimedia.
Sound with loud noise
If you watch a video from a plugged in USB
flash drive or connected computer, the
sound from your Home Theatre System
might be distorted. This noise is heard when
the audio or video file has DTS sound but
the Home Theatre System has no DTS sound
processing. You can fix this by setting
the Digital out format of the TV to Stereo.
Press  (Home) > Settings > All
Choppy playback of USB files
57
• The transfer performance of the USB
storage device may limit the data transfer
rate to the TV which causes poor playback.
17.9
Wi-Fi and Internet
Wi-Fi network not found or distorted
• Check if the firewalls in your network allow
access to the TV's wireless connection.
• If the wireless network does not work
properly in your home, try the wired network
installation.
Internet does not work
• If the connection to the router is OK, check
the router connection to the Internet.
The PC and Internet connection are slow
• Look in your wireless router's user manual
for information on indoor range, transfer rate
and other factors of signal quality.
• Use a high-speed (broadband) Internet
connection for your router.
DHCP
• If the connection fails, you can check the
DHCP (Dynamic Host Configuration
Protocol) setting of the router. DHCP should
be switched on.
17.10
Wrong Menu Language
Change the language back to your
language.
1 - Press  (Home), select Settings >
Region and language > Languages > Menu
language and press OK.
2 - Select on the language you need and
press OK.
3 - Press  BACK to close the menu.
58
Risk of Injury or Damage to the TV
18
Safety and Care
• Two people are required to lift and carry a
TV that weighs more than 25 kg or 55 lbs.
• If you mount the TV on a stand, only use
the supplied stand. Secure the stand to the
TV tightly.
Place the TV on a flat, level surface that can
support the weight of the TV and the stand.
• When wall mounted, ensure that the wall
mount can safely bear the weight of the TV
set. TP Vision bears no responsibility for
improper wall mounting that results in
accident, injury or damage.
• Parts of this product are made of glass.
Handle with care to avoid injury or damage.
18.1
Safety
Important
Read and understand all safety instructions
before you use the TV. If damage is caused
by failure to follow instructions, the warranty
does not apply.
Risk of damage to the TV !
Risk of Electric Shock or Fire
Before you connect the TV to the power
outlet, ensure that the power voltage
matches the value printed on the back of the
TV. Never connect the TV to the power outlet
if the voltage is different.
• Never expose the TV to rain or water. Never
place liquid containers, such as vases, near
the TV.
If liquids are spilt on or into the TV,
disconnect the TV from the power outlet
immediately.
Contact Philips TV Consumer Care to have
the TV checked before use.
• Never expose the TV, remote control or
batteries to excessive heat. Never place
them near burning candles, naked flames or
other heat sources, including direct sunlight.
• Never insert objects into the ventilation
slots or other openings on the TV.
• Never place heavy objects on the power
cord.
• Avoid force coming onto power plugs.
Loose power plugs can cause arcing or fire.
Ensure that no strain is exerted on the power
cord when you swivel the TV screen.
• To disconnect the TV from the mains
power, the power plug of the TV must be
disconnected. When disconnecting the
power, always pull the power plug, never the
cord. Ensure that you have full access to the
power plug, power cord and outlet socket at
all times.
Risk of Injury to Children
Follow these precautions to prevent the TV
from toppling over and causing injury to
children:
• Never place the TV on a surface covered by
a cloth or other material that can be pulled
away.
• Ensure that no part of the TV hangs over
the edge of the mounting surface.
• Never place the TV on tall furniture, such as
a bookcase, without anchoring both the
furniture and TV to the wall or a suitable
support.
• Teach children about the dangers of
climbing on furniture to reach the TV.
Risk of swallowing batteries !
The remote control may contain coin-type
batteries which can easily be swallowed by
small children. Keep these batteries out of
reach of children at all times.
59
Risk of Overheating
18.2
Screen Care
Never install the TV in a confined space.
Always leave a space of at least 10 cm or 4
inches around the TV for ventilation. Ensure
curtains or other objects never cover the
ventilation slots on the TV.
Clean
• Never touch, push, rub or strike the screen
with any object.
• Unplug the TV before cleaning.
• Clean the TV and frame with a soft damp
cloth and wipe gently. Never use substances
such as alcohol, chemicals or household
cleaners on the TV.
• To avoid deformations and colour fading,
wipe off water drops as quickly as possible.
• Avoid stationary images as much as
possible. Stationary images are images that
remain onscreen for extended periods of
time. Stationary images include onscreen
menus, black bars, time displays, etc. If you
must use stationary images, reduce screen
contrast and brightness to avoid screen
damage.
Lightning Storms
Disconnect the TV from the power outlet
and antenna before lightning storms.
During lightning storms, never touch any part
of the TV, power cord or antenna cable.
Risk of Hearing Damage
Avoid using earphones or headphones at
high volumes or for prolonged periods of
time.
Low Temperatures
If the TV is transported in temperatures
below 5°C or 41°F, unpack the TV and wait
until the TV temperature reaches room
temperature before connecting the TV to the
power outlet.
Humidity
In rare occasions, depending on temperature
and humidity, minor condensation can occur
on the inside of the TV glass front (on some
models). To prevent this, do not expose the
TV to direct sunlight, heat or extreme
humidity. If condensation occurs, it will
disappear spontaneously while the TV is
playing for a few hours.
The condensation moisture will not harm the
TV or cause malfunction.
60
the manufacturer. The caution sign printed
on the back of the TV indicates risk of
electric shock. Never remove the TV cover.
Always contact Philips TV Customer Care for
service or repairs. Find the telephone
number in the printed documentation that
came with the TV. Or consult our
website www.philips.com/TVsupport and
select your country if needed. Any operation
expressly prohibited in this manual, or any
adjustments and assembly procedures not
recommended or authorised in this manual,
shall void the warranty.
19
Terms of Use
2018 © TP Vision Europe B.V. All rights
reserved.
This product was brought to the market by
TP Vision Europe B.V. or one of its affiliates,
hereinafter referred to as TP Vision, which is
the manufacturer of the product. TP Vision is
the warrantor in relation to the TV with which
this booklet was packaged. Philips and the
Philips Shield Emblem are registered
trademarks of Koninklijke Philips N.V.
Pixel characteristics
This TV product has a high number of colour
pixels. Although it has effective pixels of
99.999% or more, black dots or bright points
of light (red, green or blue) may appear
constantly on the screen. This is a structural
property of the display (within common
industry standards) and is not a malfunction.
Specifications are subject to change without
notice. Trademarks are the property of
Koninklijke Philips N.V or their respective
owners. TP Vision reserves the right to
change products at any time without being
obliged to adjust earlier supplies
accordingly.
TP Vision is committed to developing,
producing and marketing products that
cause no adverse health effects. TP Vision
confirms that, as long as its products are
handled properly for their intended use, they
are safe to use according to scientific
evidence available today. TP Vision plays an
active role in the development of safety
standards, enabling TP Vision to anticipate
further developments in standardisation for
early integration in its products.
The written material packaged with the TV
and the manual stored in the memory of the
TV or downloaded from the Philips
website www.philips.com/TVsupport are
believed to be adequate for the intended
use of the system.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other
than those specified herein, confirmation of
their validity and suitability must be
obtained. TP Vision warrants that the
material itself does not infringe any United
States patents. No further warranty is
expressed or implied. TP Vision cannot be
held responsible neither for any errors in the
content of this document nor for any
problems as a result of the content in this
document. Errors reported to Philips will be
adapted and published on the Philips
support website as soon as possible.
Terms of warranty - Risk of injury, damage
to TV or void of warranty!
Never attempt to repair the TV yourself. Use
the TV and accessories only as intended by
61
20
20.4
Copyrights
DTS-HD
DTS® offers decoding of DTS content for
up to 5.1 discrete channels with support for
low bit rate and streaming media. It supports
transcoding of content via digital output
such as HDMI for playback on legacy
products.
20.1
MHL
MHL, Mobile High-Definition Link and the
MHL Logo are trademarks or registered
trademarks of the MHL, LLC.
20.5
20.2
Wi-Fi Alliance
HDMI
Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi
logo are registered trademarks of the Wi-Fi
Alliance.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc. in the
United States and other countries.
20.6
Other Trademarks
20.3
All other registered and unregistered
trademarks are the property of their
respective owners.
Dolby Audio
Manufactured under license from Dolby
Laboratories. Dolby, Dolby Audio, and the
double-D symbol are trademarks of Dolby
Laboratories.
62
Netherlands B.V. offers no support for this
software. The preceding does not affect your
warranties and statutory rights regarding any
TP Vision Netherlands B.V. product(s) you
purchased. It only applies to this source
code made available to you.
21
Open Source
21.1
Open Source Software
This television contains open source
software. TP Vision Europe B.V. hereby
offers to deliver, upon request, a copy of the
complete corresponding source code for the
copyrighted open source software packages
used in this product for which such offer is
requested by the respective licences.
Open Source
bash (3.2.48)
Bash is the shell, or command language
interpreter, that will appear in the GNU
operating system.
Bash is an sh-compatible shell that
incorporates useful features from the Korn
shell (ksh) and C shell (csh).
It is intended to conform to the IEEE POSIX
P1003.2/ISO 9945.2 Shell and Tools
standard.
It offers functional improvements over sh for
both programming and interactive use.
In addition, most sh scripts can be run by
Bash without modification.
Source: http://www.gnu.org/software/bash/
This offer is valid up to three years after
product purchase to anyone in receipt of this
information.
To obtain the source code, please write in
English to . . .
open.source@tpvision.com
21.2
Open Source License
c-ares (1.10.0)
c-ares is a C library that performs DNS
requests and name resolves asynchronously.
Source: http://c-ares.haxx.se/
About Open Source License
README for the source code of the parts of
TP Vision Netherlands B.V. TV software that
fall under open source licenses.
coreutils (6.9)
The GNU Core Utilities are the basic file, shell
and text manipulation utilities of the GNU
operating system.
These are the core utilities which are
expected to exist on every operating system.
Source:
http://www.gnu.org/software/coreutils/
This is a document describing the
distribution of the source code used on the
TP Vision Netherlands B.V. TV, which fall
either under the GNU General Public License
(the GPL), or the GNU Lesser General Public
License (the LGPL), or any other open
source license. Instructions to obtain copies
of this software can be found in the
Directions For Use.
e2fsprogs (2.12.2)
e2fsprogs provides the filesystem utilities for
use with the ext2 filesystem, it also supports
the ext3 and ext4 filesystems.
This piece of software is made available
under the terms and conditions of the
e2fsprogs license, which can be found
below.
Source: http://e2fsprogs.sourceforge.net/
TP Vision Netherlands B.V. MAKES NO
WARRANTIES WHATSOEVER, EITHER
EXPRESS OR IMPLIED, INCLUDING ANY
WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE,
REGARDING THIS SOFTWARE. TP Vision
63
Expat (2.01)
xml paser; Expat is an XML parser library
written in C. It is a stream-oriented parser in
which an application registers handlers for
things the parser might find in the XML
document (like start tags). An introductory
article on using.
This piece of software is made available
under the terms and conditions of the Expat
license, which can be found below.
Source: http://expat.sourceforge.net/
images).
Source: http://freetype.sourceforge.net
DFB (4.2.31)
It is a software library for GNU/Linux/UNIX
based operating system with a small
memory footprint that provides graphics
acceleration, input device handling and
abstraction layer, and integrated windowing
system with support for translucent windows
and multiple display layers on top of the
Linux framebuffer without requiring any
kernel modifications
Source: http://sourceforge.net/projects/joint
space/files/remote_applications_SDK/remot
e_spplications_SDK_v1.3.1/DirectFB141_sourc
e_1.3.1.7z/download
gawk (3.1.5)
If you are like many computer users, you
would frequently like to make changes in
various text files wherever certain patterns
appear, or extract data from parts of certain
lines while discarding the rest.
To write a program to do this in a language
such as C or Pascal is a time-consuming
inconvenience that may take many lines of
code.
The job is easy with awk, especially the GNU
implementation: gawk.
Source: http://www.gnu.org/software/gawk/
fuse (2.8.4)
Fuse is a simple interface for userspace
programs to export a virtual filesystem to the
linux kernel.
This piece of software is made available
under the terms and conditions of the fuse
license, which can be found below.
Source: http://fuse.sourceforge.net/
glibc (2.12.2)
Any Unix-like operating system needs a C
library: the library which defines the “system
calls” and other basic facilities such as open,
malloc, printf, exit...The GNU C library is used
as the C library in the GNU system and most
systems with the Linux kernel
This piece of software is made available
under the terms and conditions of the glibc
license, which can be found below.
Source: http://www.gnu.org/software/libc/
SAWMAN
SaWMan, the Shared application and
Window Manager, is a new window manager
module for use with DirectFB.
Source: http://www.directfb.org/index.php?p
ath=Main%2FDownloads&page=1
findutils (4.2.31)
The GNU Find Utilities are the basic directory
searching utilities of the GNU operating
system.
These programs are typically used in
conjunction with other programs to provide
modular and powerful directory search and
file locating capabilities to other commands.
Source:
http://www.gnu.org/software/findutils/
grep (2.5.1a)
The grep command searches one or more
input files for lines containing a match to a
specified pattern. By default, grep prints the
matching lines.
Source: http://www.gnu.org/software/grep/
Freetype (2.4.3)
FreeType is a software font engine that is
designed to be small, efficient, highly
customizable, and portable while capable of
producing high-quality output (glyph
gzip (1.3.12)
GNU Gzip is a popular data compression
program originally written by Jean-loup
Gailly for the GNU project. Mark Adler wrote
the decompression part.
64
Source: http://www.gnu.org/software/gzip/
compliant operating systems. We implement
MTP Basic, the stuff proposed for
standardization.
Source: http://libmtp.sourceforge.net/
inetutils (1.4.2)
Inetutils is a collection of common network
programs.
Source:
http://www.gnu.org/software/inetutils/
libjpg (6b)
This library is used to perform JPEG
decoding tasks.
This piece of software is made available
under the terms and conditions of the libjpg
license, which can be found below.
Source: http://www.ijg.org/
iptables (1.4.15)
For Cross connection.
Source:
http://www.netfilter.org/projects/iptables/
iputils (s20101006)
The iputils package is set of small useful
utilities for Linux networking. It was originally
maintained by Alexey Kuznetsov.
Source: http://www.skbuff.net/iputils/
libusb
This is the home of libusb, a library that gives
user level applications uniform access to
USB devices across many different operating
systems. libusb is an open source project
licensed under the GNU Lesser General
Public License version 2.1.
Many participants in the libusb community
have helped and continue to help with
ideas, implementation, support and
improvements for libusb.
This piece of software is made available
under the terms and conditions of the libusb
license, which can be found below.
Source:
http://libusb.wiki.sourceforge.net
http://www.libusb.org/
Libcurl (7.30.0)
HTTP client;libcurl is a free and easy-to-use
client-side URL transfer library, supporting
FTP, FTPS, HTTP, HTTPS, SCP, SFTP, TFTP,
TELNET, DICT, LDAP, LDAPS, FILE, IMAP,
SMTP, POP3 and RTSP. libcurl supports SSL
certificates, HTTP POST, HTTP PUT, FTP
uploading, HTTP form based upload,
proxies, cookies, user+password
authentication (Basic, Digest, NTLM,
Negotiate, Kerberos4), file transfer resume,
http proxy tunneling and more!
This piece of software is made available
under the terms and conditions of the Libcurl
license, which can be found below.
Source: http://curl.haxx.se/
libusb-compat
Library to enable user space application
programs to communicate with USB devices.
This piece of software is made available
under the terms and conditions of the libusbcompat license, which can be found below.
Source: http://libusb.wiki.sourceforge.net/Li
busbCompat0.1
libiconv (1.11.1)
This library provides an iconv()
implementation, for use on systems which
don't have one, or whose implementation
cannot convert from/to Unicode. .
This piece of software is made available
under the terms and conditions of the
libiconv license, which can be found below.
Source: http://ftp.gnu.org/pub/gnu/libiconv
libpng (1.2.43)
libpng -THE reference library for reading,
displaying, writing and examining png Image
Network Graphics.
This piece of software is made available
under the terms and conditions of the libpng
license, which can be found below.
Source:
http://sourceforge.net/projects/libpng/files/
libmtp (0.3.6)
libmtp is an Initiator implementation of the
Media Transfer Protocol (MTP) in the form of
a library suitable primarily for POSIX
65
Libxml2 (2.7.8)
The "libxml2" library is used in AstroTV as a
support for the execution of NCL application.
This library was developed for the GNOME
software suite and is available under a "MIT"
license.
Source: http://www.xmlsoft.org
erase. Presentation of the device's contents
to the user in an appropriate form will be
handled by the upper layers of the system.
This piece of software is made available
under the terms and conditions of the mtdutils license, which can be found below.
Source: http://www.linuxmtd.infradead.org/index.html
Linux Kernel (3.1)
The Linux kernel is an operating system
kernel used by the Linux family of Unix-like
operating systems.
This piece of software is made available
under the terms and conditions of the Linux
Kernel license, which can be found below.
Source: http://www.kernel.org
ncurses (5.7)
The ncurses (new curses) library is a free
software emulation of curses in System V
Release 4.0 (SVr4), and more. It uses
terminfo format, supports pads and color
and multiple highlights and forms characters
and function-key mapping, and has all the
other SVr4-curses enhancements over BSD
curses. SVr4 curses is better known today as
X/Open Curses.
Source:
http://www.gnu.org/software/ncurses/
Linux Fusion (8.7.0)
Source: GNU
liveMedia (2011.06.12)
c++ runtime library for RTSP requirement
Source: www.live555.com
net-tools (1.6)
The Net-tools?package is a collection of
programs for controlling the network
subsystem of the Linux kernel.
Source: http://www.linuxfromscratch.org/blf
s/view/6.3/basicnet/net-tools.html
lvm2 (2.02.89)
Userspace toolset that provide logical
volume management facilities on linux.
This piece of software is made available
under the terms and conditions of the lvm2
license, which can be found below.
Source: ftp://sources.redhat.com/pub/lvm2/
releases/
NTFS-3G Read/Write Driver (2010.5.22)
NTFS-3G is an open source cross-platform
implementation of the Microsoft Windows
NTFS file system with read-write support.
NTFS-3G often uses the FUSE file system
interface, so it can run unmodified on many
different operating systems. It is runnable on
Linux, FreeBSD, NetBSD, OpenSolaris, BeOS,
QNX, WinCE, Nucleus, VxWorks,
Haiku,MorphOS, and Mac OS X It is licensed
under either the GNU General Public License
or a proprietary license. It is a partial fork of
ntfsprogs and is under active maintenance
and development.
This piece of software is made available
under the terms and conditions of the
NTFS-3G Read/Write Driver license, which
can be found below.
Source: http://www.tuxera.com
module-init-tools (3.12)
Provides developer documentation for the
utilities used by Linux systems to load and
manage kernel modules (commonly referred
to as "drivers").
Source: https://modules.wiki.kernel.org/inde
x.php/Main_Page
mtd-utils
The aim of the system is to make it simple to
provide a driver for new hardware, by
providing a generic interface between the
hardware drivers and the upper layers of the
system. Hardware drivers need to know
nothing about the storage formats used,
such as FTL, FFS2, etc., but will only need to
provide simple routines for read, write and
openssl (1.0.1j)
66
OpenSSL is an open source implementation
of the SSL and TLS protocols. The core
library (written in the C programming
language) implements the basic
cryptographic functions and provides various
utility functions. Wrappers allowing the use
of the OpenSSL library in a variety of
computer languages are available.
Source: http://www.openssl.org/
Source: http://www.sqlite.org/
SquashFS
SquashFS is a compressed read-only file
system for Linux. SquashFS compresses
files, inodes and directories, and supports
block sizes up to 1 MB for greater
compression. SquashFS is also the name of
free/open software, licensed under the GPL,
for accessing SquashFS filesystems.
This piece of software is made available
under the terms and conditions of the
SquashFS license, which can be found
below.
Source: http://squashfs.sourceforge.net/
procps (ps, top) (3.2.8)
procps is the package that has a bunch of
small useful utilities that give information
about processes using the /proc filesystem.
The package includes the programs ps, top,
vmstat, w, kill, free, slabtop, and skill.
Source:
http://procps.sourceforge.net/index.html
tar (1.17)
GNU Tar provides the ability to create tar
archives, as well as various other kinds of
manipulation.
For example, you can use Tar on previously
created archives to extract files, to store
additional files, or to update or list files
which were already stored.
Source: http://www.gnu.org/software/tar/
samba (3.0.37)
Samba is the standard Windows
interoperability suite of programs for Linux
and Unix.
Source: http://www.samba.org/
SaWMan (1.5.3)
SaWMan, the Shared application and
Window Manager, is a new window manager
module for use with DirectFB.
Source: http://www.directfb.org
u-Boot (2011.12)
The uboot will load the linux kerenl to
dram,and jump to run .
This piece of software is made available
under the terms and conditions of the uBoot loader license, which can be found
below.
Source: http://www.denx.de
sed (4.1.5)
sed (stream editor) isn't an interactive text
editor. Instead, it is used to filter text, i.e., it
takes text input, performs some operation
(or set of operations) on it, and outputs the
modified text.
sed is typically used for extracting part of a
file using pattern matching or substituting
multiple occurrences of a string within a file.
Source: http://www.gnu.org/software/sed/
udhcpc (0.9.8cvs20050303-3)
Source: http://udhcp.sourcearchive.com/do
wnloads/0.9.8cvs20050303-3/
uDirectFB (1.5.3)
Source: http://www.directfb.org
SQLite3 (2.12.2)
SQLite is a in-process library that
implements a self-contained, serverless,
zero-configuration, transactional SQL
database engine.
This piece of software is made available
under the terms and conditions of the
SQLite3 license, which can be found below.
uriparser (0.7.7)
Uriparser is a strictly RFC 3986 compliant
URI parsing and handling library written in C.
uriparser is cross-platform, fast, supports
Unicode and is licensed under the New BSD
license.
Source: http://uriparser.sourceforge.net/
67
util-linux-ng (2.18)
Various system utilities.
Source: http://userweb.kernel.org/~kzak/utillinux-ng/
wget (1.10.2)
GNU Wget is a free software package for
retrieving files using HTTP, HTTPS and FTP,
the most widely-used Internet protocols.
It is a non-interactive commandline tool, so
it may easily be called from
scripts,?cron?jobs, terminals without XWindows support, etc.
Source: http://ftp.gnu.org/gnu/wget/wget-1.1
0.2.tar.gz
wpa_supplicant v0.8(wext)/v2.3(cfg80211)
wpa_supplicant is a WPA Supplicant for
Linux, BSD, Mac OS X, and Windows with
support for WPA and WPA2 (IEEE 802.11i /
RSN). It is suitable for both desktop/laptop
computers and embedded systems.
Supplicant is the IEEE 802.1X/WPA
component that is used in the client stations.
It implements key negotiation with a WPA
Authenticator and it controls the roaming
and IEEE 802.11 authentication/association
of the wlan driver.
Source: https://w1.fi/wpa_supplicant/
xerces-c++ (3.1.1)
Source: http://xerces.apache.org/
zlib (6b)
The 'zlib' compression library provides inmemory compression and decompression
functions, including integrity checks of the
uncompressed data.
This piece of software is made available
under the terms and conditions of the zlib
license, which can be found below.
Source: http://www.zlib.net/
68
22
Disclaimer
regarding
services and/or
software offered
by third parties
Services and/or software offered by third
parties may be changed, suspended, or
terminated without prior notice. TP Vision
does not bear any responsibility in these
sorts of situations.
69
Index
A
Equalizer 38
Advanced Picture Settings 35
Advanced Sound Settings 38
Antenna Connection 13
App Gallery 48
Audio Language 42
Audio Out Menu 38
Auto Clock Mode 42
F
B
Gamma 36
General Settings 40
Get Support 4
Favourite Channel, Channel Range 23
Favourite Channel, Create 23
Favourite Channel, Edit 23
Favourite Channels 24
G
Batteries 8
C
H
Channel List 22
Channel List Copy 20
Channel Options 21
Channel, Channel Filter 23
Channel, Rename Channel 22
Channels 19
Child Lock 44
Child Lock, Change Code 44
Child Lock, Set Code 44
Clear dialogue 38
Clear Internet Memory 46
Clock 42
Colour 35
Colour Enhancement 35
Colour Settings 35
Colour Temperature 35
Component - Y Pb Pr 13
Composite - CVBS 13
Connect Device 13
Consumer Care 5
Contact Info 4
Contrast 35
HDMI - CEC 40
HDMI Connection 13
HDMI Sound System 38
HDMI, HDMI ARC 13
Headphone Connection 14
Headphones 38
Help Menu 4
Home Menu 34
Home or Shop 41
I
Identify TV 4
Input Resolution 52
K
Keys on Remote Control 8
Keys on TV 10
L
Location 41
Lock Channel 23
M
D
Menu Languages 42
Miracast 14
Miracast Connection 14
Mouse Settings 40
Date 42
Daylight Saving 42
Digital Media Renderer - DMR 46
Digital Out Delay 39
Digital Out Format 39
Digital Out Levelling 39
Digital Out Menu 39
Digital Out Offset 39
Dynamic Contrast 36
Dynamic surround 38
N
Netflix Settings 46
Network - Wired 46
Network - Wireless 45
Network Settings 45
Network Settings Menu 46
E
O
End of Use 50
Energy Saving 40
On-line User Manual 4
Optical - Digital Audio Out 14
70
Troubleshooting 54
TV Guide 27
TV Guide Data 39
TV Network Name 46
TV Placement 38
TV Reception 52
TV Speaker 38
P
Parental Rating 44
Pause TV 30
Philips Support 4
Philips TV Remote App 15
Photos, Videos and Music 32
Picture Clean, Noise Reduction 37
Picture Contrast Menu 36
Picture Contrast Mode 36
Picture Format 37
Picture Style 35
Picture, Colour 35
Picture, Contrast 35
Picture, Sharpness 35
Power Cable 12
Problems 54
U
Universal Access 43
Universal Access, Audio Description 43
Universal Access, Audio Effects 43
Universal Access, Hearing Impaired 43
Universal Access, Mixed Volume 43
Universal Access, Speech 43
Unlock Channel 23
Update Software 6
Update Software - Internet 6
Update Software - Local Updates 6
Update Software - OAD 6
Update Software - USB 6
USB Hard Drive 40
USB Hard Drive - Format 16
USB Hard Drive - Install 16
USB Hard Drive Connection 16
USB Keyboard Settings 40
User Manual 4
Q
Quick Picture Settings 37
Quick Settings Menu 34
R
Recordings 29
Register TV 4
Remote Control 8
Remote Control - IR Sensor 9
Remote Control and Batteries 8
Rename or replace device icon 18
Repair 5
Reset Settings 41
V
Video Contrast 36
View Network Settings 46
Viewing Distance 11
S
Safety and Care 59
Screen Off 40
Sharpness 35
Shop Setup 41
Sleep Timer 42
Smart TV 48
Software Version 7
Sound Menu 37
Sound Style 37
Sound, Auto Volume Levelling 38
Sound, Delta Volume 38
Source List 18
Standby Mode 12
Static IP 46
Subtitle Language 42
Super resolution 36
Switch Off Timer 40
Switch On with Wi-Fi 46
Switching On 12
W
Wi-Fi 46
T
Teletext 24
Text 24
Time 42
Time Zone 42
71
Powered by TCPDF (www.tcpdf.org)
72
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising