Philips | HTS2500/98 | Owner's Manual | Philips Immersive Sound Home theater HTS2500/98 User manual

Philips Immersive Sound Home theater HTS2500/98 User manual
Register your product and get support at
www.philips.com/welcome
HTS2500
1
Notice
Copyright
About Progressive Scan
Trademarks
2
Important
Safety
Product care
Disposal of your old product and batteries
3
Your home theater
Main unit
Remote control
4
Connect your home theater
Connectors
Connect to the TV
Connect audio from TV or other devices
5
Use your home theater
Before you start
Choose your sound
Play a disc
Play from a USB storage device
More play features for disc or USB
Play from radio
Play audio from TV or other devices
6
Change settings
Access the setup menu
Change general settings
Change audio settings
Change video settings
Change preference settings
7
Update software
Check software version
Update software from a CD-R or USB
2
2
2
2
8
Product specifications
13
9
Troubleshooting
14
10 Index
15
3
3
3
4
4
4
5
6
6
6
7
7
7
7
8
9
9
9
10
10
10
11
11
11
12
12
12
12
EN
1
English
Contents
1
Notice
Copyright
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
About Progressive Scan
Consumers should note that not all high denition
television sets are fully compatible with this
product and may cause artifacts to be displayed in
the picture. In case of 525 or 625 progressive scan
picture problems, it is recommended that the user
switch the connection to the ‘standard denition’
output. If there are questions regarding our TV set
compatibility with this model 525p and 625p DVD
player, please contact our customer service center.
Trademarks
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
DivX®, DivX Certied® and associated logos are
registered trademarks of DivX, Inc. and are used
under license.
DivX Ultra® Certied to play DivX® video with
advanced features and premium content.
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, Inc. This is an ofcial
DivX Certied device that plays DivX video.
Visit www.divx.com for more information and
software tools to convert your les into DivX
video.
2
EN
ABOUT DIVX VIDEO-ON-DEMAND: This
DivX Certied ® device must be registered in
order to play DivX Video-on-Demand (VOD)
content. To generate the registration code,
locate the DivX VOD section in your device
setup menu. Go to vod.divx.com with this code
to complete the registration process and learn
more about DivX VOD.
LASER RADIATION
DO NOT VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS
CLASS 1M LASER PRODUCT
Important
Read and understand all instructions before you
use your home theater. If damage is caused by
failure to follow instructions, the warranty does
not apply.
Safety
Risk of electric shock or fire!
•
Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Philips Consumer
Care to have the product checked before
use.
•
Never place the product and accessories
near naked ames or other heat sources,
including direct sunlight.
•
Never insert objects into the ventilation
slots or other openings on the product.
•
Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
•
Disconnect the product from the power
outlet before lightning storms.
•
When you disconnect the power cord,
always pull the plug, never the cable.
Risk of short circuit or fire!
•
Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.
Risk of injury or damage to the home theater!
•
For wall-mountable products, use only the
supplied wall mount bracket. Secure the
wall mount to a wall that can support the
combined weight of the product and the
wall mount. Koninklijke Philips Electronics
N.V. bears no responsibility for improper
wall mounting that results in accident, injury
or damage.
•
For speakers with stands, use only the
supplied stands. Secure the stands to the
speakers tightly. Place the assembled stands
on at, level surfaces that can support the
combined weight of the speaker and stand.
•
Never place the product or any objects
on power cords or on other electrical
equipment.
•
If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
•
Visible and invisible laser radiation when
open. Avoid exposure to beam.
•
Do not touch the disc optical lens inside the
disc compartment.
Risk of overheating!
•
Never install this product in a conned
space. Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
Risk of contamination!
•
Do not mix batteries (old and new or
carbon and alkaline, etc.).
•
Remove batteries if they are exhausted or
if the remote control is not to be used for a
long time.
•
Batteries contain chemical substances, they
should be disposed of properly.
Product care
•
•
•
•
Do not insert any objects other than discs
into the disc compartment.
Do not insert warped or cracked discs into
the disc compartment.
Remove discs from the disc compartment
if you are not using the product for an
extended period of time.
Only use microber cloth to clean the
product.
EN
3
English
2
Disposal of your old product
and batteries
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
3
Your home theater
Congratulations on your purchase, and welcome
to Philips! To fully benet from the support that
Philips offers, register your home theater at
www.philips.com/welcome.
Main unit
6
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and do not
dispose of your old products with your normal
household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot be
disposed with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries because correct
disposal helps to prevent negative consequences
for the environmental and human health.
EN
8
a Disc compartment
b
(Open/Close)
Opens or closes the disc compartment.
c
(Play/Pause)
Starts, pauses or resumes play.
d
(Stop)
• Stops play.
• In radio mode, erases the current
preset radio station.
e
(Standby-On)
Switches the home theater on or to
standby.
f SOURCE
Selects an audio/video source for the home
theater.
g
+/Increases or decreases volume.
h Display panel
4
7
•
•
a
b
v
u
c
•
f
(Navigation buttons)
Navigate menus.
In video mode, press left or right to
fast backward or fast forward.
In radio mode, press left or right to
search a radio station; press up or
down to ne tune a radio frequency.
English
e
Remote control
INFO
Displays information about what is playing.
d
g Playback buttons
e
h SURR (Surround Sound)
Control playback.
Switches to surround sound or stereo sound.
i AUDIO
Selects an audio language or channel.
t
f
j Numeric buttons
Selects an item to play.
g
Selects subtitle language for video.
s
h
r
q
k SUBTITLE
i
l
SCREEN FIT
Fits the picture format to the TV screen.
m ZOOM
Zooms into a video scene or picture.
n REPEAT A-B
Marks two points within a chapter or track
for repeat play, or turns off repeat mode.
j
p
o
k
n
m
l
o REPEAT / PROGRAM
• Selects a repeat or shufe mode.
• In radio mode, programs radio stations.
p ANGLE
Displays options for different camera angles.
q SOUND
Selects a sound mode.
a
b
(Standby-On)
Switches the home theater on or to
standby.
(Open/Close)
Opens or closes the disc compartment.
c SLEEP
Switches the home theater to standby after
the preset time selected.
d
SETUP
Accesses or exits the setup menu.
r
+/Increases or decreases volume.
s
(Mute)
Mutes or restores volume.
t
BACK
Returns to a previous menu screen.
u OK
Conrms an entry or selection.
v Source buttons
• AUDIO SOURCE : Selects an audio
input source.
• RADIO: Switches to FM radio.
• USB: Switches to USB storage device.
• DISC: Switches to disc source.
EN
5
4
Connect your home
theater
This section helps you connect your home theater
to a TV and other devices. The basic connections of
the home theater with its accessories are provided
in the Quick Start. For a comprehensive interactive
guide, see www.connectivityguide.philips.com.
Note
d VIDEO OUT-VIDEO
Connects to the composite video input on
the TV.
e VIDEO OUT-Y Pb Pr
Connects to the component video input on
the TV.
f FM ANTENNA
Connects the FM antenna for radio
reception.
Connect to the TV
• Refer to the type plate at the back or bottom
of the product for identication and supply
ratings.
• Before you make or change any connections,
ensure that all devices are disconnected from
the power outlet.
Connect your home theater directly to a TV
through one of the following connectors (from
highest to basic quality video):
a Component video
b Composite video
Connectors
Side connectors
Option 1: Connect to the TV through
YPbPr (component video)
Note
• The component video cable or connector
might be labeled Y Cb Cr or YUV.
(Cable not supplied)
a
(USB)
Audio, video or picture input from a USB
storage device.
Component Video Out
TV
Back connectors
Component Video In
a AC MAINS~
Connects to the power supply.
b SPEAKERS
Connects to the supplied speakers and
subwoofer.
c AUDIO IN-AUX
Connects to the analog audio output on the
TV or an analog device.
6
EN
Note
• The composite video cable or connector might
be labeled AV IN , VIDEO IN , COMPOSITE or
BASEBAND.
5
Use your home
theater
English
Option 2: Connect to the TV through
composite video (CVBS)
This section helps you use the home theater to
play media from a wide range of sources.
Before you start
TV
Check that you:
•
Make the necessary connections and complete
the setup as described in the Quick Start.
•
Switch the TV to the correct source for the
home theater.
Choose your sound
Connect audio from TV or
other devices
This section helps you choose the ideal sound for
your video or music.
Use your home theater to play audio from the
TV or other device such as a cable box.
Change sound mode
Tip
Select predened sound modes to suit your
video or music.
• Press AUDIO SOURCE to select the audio
output of your connection.
(Cable not supplied)
Press SOUND repeatedly to cycle through the
available sound modes.
TV
Sound mode
Description
ACTION /
ROCK
Enhanced low and high-range.
Ideal for action movies and rock
or pop music.
DRAMA /
Clear mid and high-range. Ideal
JAZZ
for drama movies and jazz music.
CONCERT/ Neutral sound. Ideal for live
CLASSIC
concerts and classical music.
SPORTS
Moderate mid-range and
surround effects for clear vocals
and the atmosphere of a live
sport venue.
NIGHT
Dynamically controlled sound
mode suitable for watching
movies at night or for nonintrusive background music.
EN
7
Change surround sound mode
Use video options
Experience an immersive audio experience with
surround sound modes.
Access several useful features while viewing
video.
Note
• Available video options depend on the video
source.
Press SURR repeatedly to cycle through the
available surround modes.
Button
/
Option
Description
MULTICHANNEL
STEREO
Immersive multi-channel sound for
an enhanced movie experience.
Two-channel stereo sound. Ideal
for listening to music.
AUDIO
SUBTITLE
Play a disc
The home theater can play a wide variety of discs,
including video, audio and mixed media (for example,
a CD-R that contains JPEG pictures and MP3 music).
Insert a disc into the home theater.
Press DISC .
» The disc plays or the disc main menu
appears.
1
2
3
INFO
REPEAT
REPEAT
A-B
ANGLE
Action
Searches slow-backward or
slow-forward. Press repeatedly to
change the search speed.
For VCD/SVCD, slow-backward
search is not available.
Selects an audio language or
channel.
Selects subtitle language for
video.
Displays information about what
is playing.
Repeats a chapter or title.
Marks two points within a
chapter for repeat play, or turns
off repeat mode.
Displays options for different
camera angles.
Press the following buttons to control play:
Use picture options
Button
Action
Navigation
buttons
OK
Navigate menus.
Conrms an entry or selection.
Starts, pauses or resumes play.
Stops play.
Skips to the previous or next
/
track, chapter or le.
Fast backwards or fast forwards.
/
Press repeatedly to change the
search speed.
ZOOM
Zooms into a video scene or
picture.
REPEAT A-B Marks two points within a
chapter or track for repeat play,
or turns off repeat mode.
SCREEN Fits the picture format to the TV
screen.
FIT
8
EN
Access several useful features while viewing
pictures.
Button
/
/
REPEAT
INFO
Action
Rotates the picture counterclockwise or clockwise.
Skips to the previous or next
picture.
Repeats a single le in the folder or
repeats the entire folder.
Shufes les in a folder.
Displays photo albums in a
thumbnail overview.
Quick skip play to a specific time
Access several useful features while audio is played.
Quick skip to a specic part of a video by
entering the time of a scene.
During video play, press INFO.
Press the Navigation buttons and OK to
select:
• [TT Time] : Title time.
• [Ch Time] : Chapter time.
• [Disc Time] : Disc time.
• [Track Time] : Track time.
Button
Action
REPEAT
Repeats a track, the entire disc or
shufe tracks.
Marks two points within a track for
repeat play, or turns off repeat mode.
REPEAT
A-B
Play from a USB storage device
The home theater is tted with a USB connector
that allows you to view pictures, listen to music or
watch movies stored on a USB storage device.
Connect the USB storage device to the
home theater.
Press USB .
» A content browser appears.
1
2
3
4
Select a le, then press OK .
Press the playback buttons to control play
(see ‘Play a disc’ on page 8).
English
Use audio options
1
2
3
Enter the time of the scene, then press OK .
Play from radio
The home theater can store up to 40 radio
stations.
Check that the FM antenna is connected.
Press RADIO.
» “AUTO INSTALL...PRESS PLAY’ appears
on the display panel if you have not
installed any radio stations. Press
.
1
2
3
Press the following buttons to control play:
Note
• If the USB storage device does not t into the
connector, use a USB extension cable.
• The home theater does not support digital
cameras that need a computer program to
display photos.
• The USB storage device must be FAT or DOSformatted, and Mass Storage Class compliant.
More play features for disc or USB
Several advanced features are available for video or
picture playback from a disc or USB storage device.
Play a musical slideshow
Play music and pictures simultaneously to create
a musical slideshow. The les must be stored on
the same disc or USB storage device.
Play a music track.
Navigate to the picture le, then press OK
to start slideshow.
Press
to stop slideshow.
Press
again to stop music.
1
2
Button
Action
Selects a preset radio station.
Searches for a radio station.
/
Fine tunes a radio frequency.
Press and hold to erase the
preset radio station.
Press to stop the installation of
radio stations.
PROGRAM Manual: Press once to access
program mode, and press again
to store the radio station.
Automatic: Press and hold for ve
seconds to reinstall radio stations.
/
Note
• AM and digital radio are not supported.
• If no stereo signal is detected, or if fewer than
ve stations are found, you are prompted to
install the radio stations again.
• For the best reception, place the antenna away
from the TV or other sources of radiation.
3
4
EN
9
Change tuning grid
In some countries, you can switch the FM tuning
grid between 50 kHz and 100 kHz. Changing
tuning grid erases all preset radio stations.
Press RADIO.
Press .
Press and hold
until ‘GRID 9’ (50 kHz)
or ‘GRID 10’ (100 kHz) is displayed.
1
2
3
Play audio from TV or other
devices
Press AUDIO SOURCE repeatedly to select the
audio output of the connected device .
6
Change settings
This section helps you to change the settings of
your home theater.
Caution
• Most of the settings are already congured
with the best value for the home theater.
Unless you have a specic reason to change a
setting, it is best to leave it at the default value.
Access the setup menu
1
Press SETUP.
» The following menu appears.
Symbol
Description
[General Setup]
[Audio Setup]
[Video Setup]
[Preference Setup]
2
3
Select a setup menu, then press OK .
See the following sections for information
about how to change the settings of your
home theater.
Press
BACK to return to the previous
menu, or press SETUP to exit.
Note
• You cannot change a setting that is grayed out.
10
EN
Change video settings
1
2
3
Press SETUP.
Select [General Setup], then press OK .
Select and adjust the following settings:
• [OSD Language] : Selects the onscreen display menu language.
• [Screen Saver] : Enables or disables
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
• [DivX(R) VOD Code] : Displays the
DivX VOD registration code for the
home theater.
1
2
3
4
Press SETUP.
Select [Video Setup], then press OK .
Select and adjust the following settings:
• [TV System] : Selects a TV system that
is compatible with the TV.
• [TV Display] : Selects a picture display
format to t the TV screen.
• [Screen Fit] : Selects a full screen
format that best ts to the TV screen.
• [Picture Settings] : Selects a
predened color setting.
• [Progressive] : Enables or disables
progressive scan mode.
Press OK to conrm your choice.
4
Press OK to conrm your choice.
Note
• Before you purchase DivX videos and play
them on the home theater, register the home
theater on www.divx.com using the DivX
VOD code.
Note
• The best setting is automatically selected for
the TV. If you need to change the setting,
ensure that the TV supports the new setting.
• Some video settings depend on the video
source, ensure that the disc and the TV
support the setting or feature.
Change audio settings
1
2
3
Press SETUP.
Select [Audio Setup], then press OK .
Select and adjust the following settings:
• [Speakers Volume] : Sets the volume
of each speaker to obtain the ideal
audio balance.
• [Speakers Delay] : Sets the delay time
for center and rear speakers to obtain
an equal audio transmission from all
the speakers.
4
Press OK to conrm your choice.
EN
11
English
Change general settings
Change preference settings
7
1
2
3
To check for new updates, compare the current
software version of your home theater with the
latest software version (if available) on the Philips
web site.
4
Press SETUP.
Select [Preference Setup], then press OK .
Select and adjust the following settings:
• [Audio] : Selects audio language for
video.
• [Subtitle] : Selects subtitle language for
video.
• [Disc Menu] : Selects menu language
for video disc.
• [Parental] : Restricts access to discs
that are recorded with ratings. To
play all discs irrespective of the rating,
select level ‘8’.
• [PBC] : Displays or skips the content
menu for VCD and SVCD discs.
• [Password] : Sets or changes a PIN
code to play a restricted disc. Enter
‘ 0000 ’ if you do not have a PIN or if
you have forgotten your PIN.
• [DivX Subtitle] : Selects a character
set that supports the DivX subtitle.
• [Version Info.] : Displays the software
version for the home theater.
• [Default] : Resets the home theater to
the default settings programmed at the
factory.
Press OK to conrm your choice.
Note
• If your preferred disc language is not available,
you can select [Other] from the list and enter
the 4-digit language code which can be found
at the back of this manual.
• If you select a language that is not available
on a disc, the home theater uses the default
language of the disc.
• You cannot reset disc lock, password (PIN
code) and parental control settings to their
default values.
12
EN
Update software
Check software version
1
2
Press SETUP.
Select [Preference Setup] > [Version Info.],
then press OK .
» The software version is displayed.
Update software from a CD-R
or USB
1
Check for the latest software version on
www.philips.com/support.
• Search for your model and click on
‘software&drivers’.
2
Download the software onto a CD-R or
USB storage device.
Insert the CD-R or connect the USB
storage device to the home theater.
Follow the instructions on the TV to
conrm the update.
» When complete, the home theater
automatically switches off and on again.
• If not, disconnect the power cord for a
few seconds and then reconnect it.
3
4
Caution
• Do not turn off the power or remove the
CD-R or USB storage device when the
software update is in progress because you
might damage the home theater.
Product
specifications
Note
• Specication and design are subject to change
without notice.
Region code
The type plate on the back or bottom of the
home theater shows which regions it supports
Country
DVD
Europe, United Kingdom
Asia Pacific, Taiwan, Korea
Latin America
Australia, New Zealand
Russia, India
China
Playback media
DVD-Video, DVD+R/+RW, DVD-R/-RW, CD-R/
CD-RW, Audio CD, Video CD/SVCD, Picture CD,
MP3-CD, WMA-CD, DivX-CD, USB storage device
File Format
•
Audio: .mp3, .wma
•
Video: .divx, .divx ultra, .mpeg, .mpg, .wmv
(simple prole)
•
Picture: .jpeg, .jpg
Amplifier
•
Total output power: 250 W RMS (10%
THD), 300 W RMS (30% THD)
•
Frequency response: 20 Hz-20 kHz / ±3dB
•
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
•
Input sensitivity:
• AUX: 1 mV
Video
•
Signal system: PAL / NTSC
Audio
•
Sampling frequency:
• MP3: 32 kHz, 44.1 kHz, 48 kHz
• WMA: 44.1 kHz, 48 kHz
•
Constant bit rate:
• MP3: 112 kbps - 320 kbps
• WMA: 48 kbps - 192 kbps
Radio
•
Tuning range: FM 87.5-108 MHz (50/100
kHz)
•
Signal-to-noise ratio: FM 50 dB
•
Frequency response: FM 180 Hz ~ 10 kHz
/ ±6dB
USB
•
Compatibility: USB
•
Class support: UMS (USB Mass Storage
Class)
•
File system: FAT16, FAT32
•
Maximum memory support: < 160GB
Main Unit
• Power supply: 110-240V, ~50-60 Hz;
•
Power consumption: 55 W
•
Standby power consumption: 1 W
•
Dimensions (WxHxD): 360 x 58 x 303
(mm)
•
Weight: 2.3 kg
Subwoofer
•
Impedance: 12 ohm
•
Speaker drivers: 133 mm (5.25”) woofer
•
Frequency response: 40 Hz-150 kHz
•
Dimensions (WxHxD): 160 x 267.5 x 265
(mm)
•
Weight: 2.65 kg
•
Cable length: 2 m
Speakers
•
System: full range satellite
•
Speaker impedance: 3 ohm
•
Speaker drivers: 3” full range
•
Frequency response: 150 Hz-20 kHz
•
Dimensions (WxHxD): 100 x 100 x 75
(mm)
•
Weight: 0.30~0.66 kg/each
•
Cable length:
• Center: 1 m
• Front: 2 m
• Rear: 10 m
EN
13
English
8
Laser specification
•
Type: Semiconductor laser GaAIAs (CD)
•
Wave length: 645 - 665 nm (DVD), 770 800 nm (CD)
•
Output power: 6 mW (DVD), 7 mW
(VCD/CD)
•
Beam divergence: 60 degrees.
9
Troubleshooting
Warning
• Risk of electric shock. Never remove the
casing of the product.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, register your product and get
support at www.philips.com/welcome.
If you contact Philips, you will be asked for the
model and serial number of your product. The
model number and serial number are on the back
or bottom of your product. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Main unit
The buttons on this home theater do not work.
•
Disconnect the home theater from the
power outlet for a few minutes, then
reconnect.
Picture
No picture.
•
Ensure that the TV is switched to the
correct source for this home theater.
•
If this happens when you change the TV
system, switch to its default mode: 1) Press
. 2) Press . 3) Press SUBTITLE .
•
If this happens when you switch on the
progressive scan mode, switch to its default
mode: 1) Press . 2) Press . 3) Press
AUDIO.
Sound
No sound.
•
Ensure that the audio cables are connected
and select the correct input source (for
example, AUDIO SOURCE ) for the device
you want to play.
14
EN
Play
Disc cannot be played.
•
Clean the disc.
•
Ensure that the home theater supports the
disc (see ‘Product specications’ on page 13).
•
Ensure that the home theater supports the
region code of the DVD.
•
For DVD±RW or DVD±R, ensure that the
disc is nalized.
DivX video files cannot be played.
•
Ensure that the DivX le is encoded
according to the ‘Home Theater Prole’
with the DivX encoder.
•
Ensure that the DivX video le is complete.
DivX subtitles do not display correctly.
•
Ensure that the subtitle le name is the
same as the movie le name.
•
Select the correct character set: 1) Press
SETUP. 2) Select [Preference Setup].
3) Select [DivX Subtitle]. 4) Select a
supported character set. 5) Press OK .
The contents of a USB storage device cannot be
read.
•
Ensure that the format of the USB storage
device is compatible with the home theater
(see ‘Product specications’ on page 13).
•
Ensure that the USB storage device
is formatted with a le system that is
supported by the home theater.
‘No entry’ or ‘x’ sign appears on the TV.
•
The operation is not possible.
10 Index
English
No sound from TV program.
•
Connect an audio cable from the audio
input on the home theater to the audio
output on the TV, then press AUDIO
SOURCE repeatedly to select the correct
audio source.
Distorted sound or echo.
•
Ensure that the TV volume is muted or set
to minimum if you are playing audio through
the home theater.
A
amplifier
audio
connection
13
7
C
care
change settings
connect
audio from TV
guide
other devices
TV
connectors
contact us
3
10
7, 10
6
7
6
6
14
D
disc
play
supported discs
disposal of your product
8
13
4
F
file formats
13
O
overview
connectors
main unit
remote control
6
4
5
P
picture
options
slide show
thumbnail overview
troubleshooting
play
disc
options
radio
troubleshooting
USB storage device
product care
product specifications
progressive scan
8
9, 8
8
14
8
8
9
15
9
3
13
2
EN
15
R
radio
play
program
tune
tuning grid
recycle
region code
remote control
repeat
rotate pictures
9
9
9
10
4
13
5
8
8
S
safety
slideshow
play musical slideshow
software
update
version
sound
mode
surround
troubleshooting
3
9
12
12
7
8
14
T
time search video
troubleshooting
TV
audio from TV
connect
9
14
7, 10
6
U
USB
play
software update
16
EN
9
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising