Philips | HTS5543/68 | Owner's Manual | Philips 5.1 Home theater HTS5543/68 User manual

Philips 5.1 Home theater HTS5543/68 User manual
Always there to help you
Register your product and get support at
www.philips.com/welcome
Question?
Contact
Philips
User manual
HTS5543
Contents
1 Important Safety Care for your product Care of the environment Help and support 2 Your home theater Main unit Connectors Remote control 3
3
4
4
4
5
5
5
6
7 Product specifications 23
8 Troubleshooting 25
9 Notice 27
27
27
10 Index 28
Copyright Trademarks 3 Connect and set up 8
Connect speakers 8
Connect to TV 9
Connect audio from TV and other
devices 11
Set up speakers 11
Set up EasyLink (HDMI-CEC control) 12
4 Use your home theater 14
14
14
15
16
17
17
18
18
19
5 Change settings 20
20
20
20
21
21
21
21
6 Update software 22
22
22
Discs Data files USB storage devices Audio, video, and picture options Radio MP3 player Create MP3 files Karaoke Choose sound Language settings Picture and video settings Audio settings Parental control settings Display settings Energy saving settings Restore default settings Check software version Update software through USB EN
2
1 Important
Read and understand all instructions before you
use your product. If damage is caused by failure
to follow instructions, the warranty does not
apply.
Safety
Risk of electric shock or fire!
• Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Philips Consumer Care
to have the product checked before use.
• Never place the product and accessories
near naked flames or other heat sources,
including direct sunlight.
• Never insert objects into the ventilation
slots or other openings on the product.
• Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
• Disconnect the product from the power
outlet before lightning storms.
• When you disconnect the power cord,
always pull the plug, never the cable.
Risk of short circuit or fire!
• Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.
Risk of injury or damage to the home theater!
• For wall-mountable products, use only the
supplied wall mount bracket. Secure the
wall mount to a wall that can support the
combined weight of the product and the
wall mount. Koninklijke Philips Electronics
N.V. bears no responsibility for improper
3
EN
wall mounting that results in accident,
injury or damage.
• For speakers with stands, use only the
supplied stands. Secure the stands to the
speakers tightly. Place the assembled stands
on flat, level surfaces that can support the
combined weight of the speaker and stand.
• Never place the product or any objects
on power cords or on other electrical
equipment.
• If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
• Visible and invisible laser radiation when
open. Avoid exposure to beam.
• Do not touch the disc optical lens inside
the disc compartment.
• Parts of this product can be made of
glass. Handle with care to avoid injury and
damage.
Risk of overheating!
• Never install this product in a confined
space. Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
Risk of contamination!
• Do not mix batteries (old and new or
carbon and alkaine, etc.).
• Danger of explosion if batteries are
incorrectly replaced. Replace only with the
same or equivalent type.
• Remove batteries if they are exhausted or
if the remote control is not to be used for
a long time.
• Batteries contain chemical substances, they
should be disposed of properly.
Risk of swallowing batteries!
• The product/remote control may contain
a coin/button type battery, which can be
swallowed. Keep the battery out of reach
of children at all times! If swallowed, the
battery can cause serious injury or death.
Severe internal burns can occur within two
hours of ingestion.
•
•
•
If you suspect that a battery has been
swallowed or placed inside any part of the
body, seek immediate medical attention.
When you change the batteries, always
keep all new and used batteries out of
reach of children. Ensure that the battery
compartment is completely secure after
you replace the battery.
If the battery compartment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.
Care for your product
•
•
•
•
Do not insert any objects other than discs
into the disc compartment.
Do not insert warped or cracked discs into
the disc compartment.
Remove discs from the disc compartment
if you are not using the product for an
extended period of time.
Use only microfiber cloth to clean the
product.
Care of the environment
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed with normal household waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
Help and support
Philips provides extensive online support. Visit
our website at www.philips.com/support to:
• download the complete user manual
• print the quick start guide
• watch video tutorials (available only for
selected models)
• find answers to frequently answered
questions (FAQs)
• email us a question
• chat with our support representative.
Follow the instructions on the website to select
your language, and then enter your product
model number.
Alternatively, you can contact Philips Consumer
Care in your country. Before you contact
Philips, note down the model number and
serial number of your product. You can find this
information on the back or bottom of your
product.
EN
4
2 Your home
theater
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Main unit
This section includes an overview of the main
unit.
a
(Standby-On)
Switch the home theater on or to standby.
b
(Play/Pause)
Start, pause or resume play.
c
•
•
(Stop)
Stop play.
In radio mode, press and hold to erase
the current preset radio stations.
Open or close the disc compartment, or
eject the disc.
g Display panel
h Disc compartment
Connectors
This section includes an overview of the
connectors available on your home theater.
Front connectors
a MUSIC iLINK/MIC
Audio input from an MP3 player or a
microphone.
b
(USB)
Audio, video or picture input from a USB
storage device.
Rear connectors
d SOURCE
Select an audio or video source for the
home theater.
e
f
+/Increase or decrease volume.
(Open/Close)
a AC MAINS
Connect to the power supply.
b SPEAKERS
Connect to the supplied speakers and
subwoofer.
c Wireless Rear Audio
Connect to a Philips wireless module.
(Model: Philips RWSS5512, sold separately)
5
EN
d HDMI OUT (ARC)
Connect to the HDMI input on the TV.
1
e VIDEO OUT-VIDEO
Connect to the composite video input on
the TV.
2
f ANTENNA FM 75
Signal input from an antenna, cable or
satellite.
3
23
22
4
g AUDIO IN-AUX 1/AUX 2
Connect to an analog audio output on the
TV or an analog device.
5
h DIGITAL IN-OPTICAL
Connect to an optical audio output on the
TV or a digital device.
6
i DIGITAL IN-COAXIAL
Connect to a coaxial audio output on the
TV or a digital device.
8
7
21
20
19
18
9
Remote control
10
This section includes an overview of the
remote control.
17
11
12
16
13
15
14
a
b
(Standby-On)
Switch the home theater on or to
standby.
• When EasyLink is enabled, press
and hold for at least three seconds
to switch all connected HDMI CEC
compliant devices to standby.
•
(Open/Close)
Open or close the disc compartment, or
eject the disc.
EN
6
c Source buttons
• DISC: Switch to disc source.Access
or exit the disc menu when you play
a disc.
• AUDIO SOURCE: Select an audio
input source.
• RADIO: Switch to FM radio.
• USB: Switch to USB storage device.
n MIC VOL +/Increase or decrease the microphone
volume.
d Navigation buttons
• Navigate menus.
• In video mode, press left or right to
fast backward or fast forward; press
up or down to slow backward or slow
forward.
• In radio mode, press left or right to
search a radio station; press up or
down to fine tune a radio frequency.
q AUDIO SYNC
• Select an audio language or channel.
• Press and hold to access audio delay
setting, and then press the +/- or
Navigation buttons to delay the audio
to match the video.
e OK
Confirm an entry or selection.
s
f
BACK
Return to a previous menu screen.
g
/ (Previous/Next)
• Skip to the previous or next track,
chapter or file.
• In radio mode, select a preset radio
station.
h
(Mute)
Mute or restore volume.
i VOL +/Increase or decrease volume.
j SOUND
Select a sound mode.
k Numeric buttons
Select an item to play.
l CREATE MP3/ZOOM
• Access the create MP3 menu.
• Zoom into a video scene or picture.
Press the Navigation buttons (left/
right) to select a zoom factor.
m KARAOKE
Access or exit the karaoke options.
7
EN
o VOCAL
Turn the vocals on or off.
p SUBTITLE
Select subtitle language for video.
r SURR
Select surround sound or stereo sound.
•
•
(Stop)
Stop play.
In radio mode, press and hold to erase
the current preset radio stations.
t
(Play/Pause)
Start, pause or resume play.
u
INFO
Access more play options while playing a
disc or a USB storage device.
v
SETUP
Access or exit the setup menu.
w REPEAT/PROGRAM
• Select or turn off repeat mode.
• In radio mode, press once to access
program mode, and press again to
store the radio station.
• In radio mode, press and hold for
three seconds to reinstall the radio
stations.
3 Connect and set
up
This section helps you connect your home
theater to a TV and other devices, and then set
it up.
For information about the basic connections
of your home theater and accessories, see
the quick start guide. For a comprehensive
interactive guide, visit www.connectivityguide.
philips.com.
Note
•• For identification and supply ratings, see the type plate
at the back or bottom of the product.
•• Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
Connect speakers
The speaker cables are color-coded for easy
connection. To connect a speaker to your home
theater, match the color on the speaker cable to
the color on the connector.
Speaker position plays a critical role in setting
up a surround sound effect. For best effect,
position all the speakers towards the seating
position and place them close to your ear level
(seated).
Note
•• Surround sound depends on factors such as room
shape and size, type of wall and ceiling, windows and
reflective surfaces, and speaker acoustics. Experiment
with the speaker positions to find the optimum setting
for you.
Follow these general guidelines for speakers
placement.
1
2
3
4
5
Seating position:
This is the center of your listening area.
FRONT CENTER (front center) speaker:
Place the center speaker directly in front of
the seating position, either above or below
your TV.
FRONT LEFT (front left) and FRONT
RIGHT (front right) speakers:
Place the left and right speakers in the
front, and at equal distance from the center
speaker. Make sure that the left, right, and the
center speakers are at equal distance from
your seating position.
REAR LEFT (rear left) and REAR RIGHT
(rear right) speakers:
Place the rear surround speakers to the
left and right side of your seating position,
either in line with it or slightly behind it.
SUBWOOFER (subwoofer):
EN
8
Place the subwoofer at least one meter
to the left or right of the TV. Leave about
10-centimeter clearance from the wall.
Make your rear speakers wireless
Connect the rear speakers to your home
theater wirelessly using a wireless module
accessory. For details, see the wireless module
user manual.
What you need
• A Philips wireless module. (Model: Philips
RWSS5512, sold separately)
1
2
3
Connect the wireless transmitter to the
Wireless Rear Audio connector on your
home theater.
Connect the rear speakers to the wireless
receiver.
Connect the wireless receiver to the
power supply.
Connect to TV
Connect your home theater to a TV to watch
videos. You can listen to the TV audio through
your home theater speakers.
Use the best quality connection available on
your home theater and TV.
Option 1: Connect to TV through
HDMI (ARC)
Best quality video
Your home theater supports HDMI version
1.4 - Audio Return Channel (ARC). If your TV
is HDMI ARC compliant, you can hear the TV
audio through your home theater by using a
single HDMI cable.
1
2
9
EN
Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on
your home theater to the HDMI ARC
connector on the TV.
• The HDMI ARC connector on the TV
might be labeled differently. For details,
see the TV user manual.
On your TV, turn on HDMI-CEC
operations. For details, see the TV user
manual.
• If you cannot hear the TV audio through
your home theater, set up the audio
manually (see 'Set up the audio' on page
13).
TV
TV
Option 2: Connect to TV through
standard HDMI
Option 3: Connect to the TV through
composite video
Best quality video
If your TV is not HDMI ARC compliant, connect
your home theater to the TV through a
standard HDMI connection.
Basic quality video
If your TV does not have HDMI connectors, use
a composite video connection. A composite
connection does not support high-definition
video.
1
2
3
Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on your
home theater to the HDMI connector on
the TV.
Connect an audio cable to hear the TV
audio through your home theater (see
'Connect audio from TV and other devices'
on page 11).
On your TV, turn on HDMI-CEC
operations. For details, see the TV user
manual.
• If you cannot hear the TV audio through
your home theater, set up the audio
manually (see 'Set up the audio' on page
13).
Note
•• If your TV has a DVI connector, you can use an HDMI/
1
2
3
4
Using a composite video cable, connect the
VIDEO connector on your home theater
to the VIDEO IN connector on the TV.
• The composite video connector might
be labeled AV IN, COMPOSITE, or
BASEBAND.
Connect an audio cable to hear the TV
audio through your home theater (see
'Connect audio from TV and other devices'
on page 11).
When you watch TV programs, press
SOURCE on your home theater
repeatedly to select the correct audio
input.
When you watch videos, switch your TV to
the correct video input. For details, see the
TV user manual.
DVI adapter to connect to TV. However, some of the
features may not be available.
EN
10
TV
Option 2: Connect audio through a
digital coaxial cable
Good quality audio
1
Connect audio from TV and
other devices
Using a coaxial cable, connect the
COAXIAL connector on your home
theater to the COAXIAL/DIGITAL OUT
connector on the TV or other device.
• The digital coaxial connector might be
labeled DIGITAL AUDIO OUT.
Play audio from TV or other devices through
your home theater speakers.
Use the best quality connection available on
your TV, home theater, and other devices.
Note
•• The audio connections in this user manual are only
recommendations. You can use other connections too.
•• When your home theater and TV are connected
through HDMI ARC, an audio connection is not
required.
Option 3: Connect audio through
analog audio cables
Basic quality audio
Option 1: Connect audio through a
digital optical cable
Best quality audio
1
1
Using an analog cable, connect the AUX
connectors on your home theater to the
AUDIO OUT connectors on the TV or
other device.
Using an optical cable, connect the
OPTICAL connector on your home
theater to the OPTICAL OUT connector
on the TV or other device.
• The digital optical connector might be
labeled SPDIF or SPDIF OUT.
VCR
TV
Set up speakers
Set up the speakers manually to experience
customized surround sound.
Before you start
11
EN
Make the necessary connections described in
the quick start guide, and then switch the TV to
the correct source for your home theater.
1
2
3
Press SETUP on your home theater
remote control.
Select [Audio Setup] and then press OK.
Press the Navigation buttons and OK to
select and change:
• [Speakers Volume]: Set the volume
level of each speaker.
• [Speakers Delay]: Set the delay time
for speakers which are placed closer to
the seating position in order to obtain
equal audio transmission from all the
speakers.
Set up EasyLink (HDMI-CEC
control)
This home theater supports Philips EasyLink,
which uses the HDMI-CEC (Consumer
Electronics Control) protocol. EasyLinkcompliant devices that are connected through
HDMI can be controlled by a single remote
control.
Note
•• Depending on the manufacturer, HDMI-CEC is known
by many names. For information on your device, see
the user manual of the device.
•• Philips does not guarantee 100% interoperability with
all HDMI-CEC devices.
Before you start
• Connect your home theater to the HDMICEC compliant device through HDMI
connection.
• Make the necessary connections described
in the quick start guide, and then switch
the TV to the correct source for your
home theater.
Enable EasyLink
1
2
3
4
Press
SETUP.
Select [Video Setup] and then press OK.
Select [HDMI Setup] > [EasyLink Setup]
> [EasyLink] > [On].
On your TV and other connected devices,
turn on HDMI-CEC control. For details, see
the user manual of the TV or other devices.
• On your TV, set the audio output to
'Amplifier' (instead of TV speakers).
For details, see the TV user manual.
EasyLink controls
With EasyLink, you can control your home
theater, TV, and other connected HDMI-CEC
compliant devices with a single remote control.
• [One Touch Play] (One-touch play): When
a video disc is in the disc compartment,
press
to wake up the TV from standby,
and then play a disc.
• [One Touch Standby] (One-touch standby):
If one-touch standby is enabled, your home
theater can switch to standby with the
remote control of the TV or other HDMICEC devices.
• [System Audio Control] (System audio
control): If system audio control is enabled,
the audio of the connected device is
output through your home theater
speakers automatically when you play the
device.
• [Audio Input Mapping] (Audio input
mapping): If system audio control does not
work, map the connected device to the
correct audio input connector on your
home theater (see 'Set up the audio' on
page 13).
Note
•• To change the EasyLink control settings, press
SETUP, select [Video Setup] > [HDMI Setup] >
[EasyLink Setup].
EN
12
Set up the audio
If you cannot hear the audio output of a
connected device through your home theater
speakers, check that you have enabled Easylink
on all the devices (see 'Enable EasyLink' on
page 12). Then, set up the EasyLink audio
control.
1
2
3
4
5
13
Press
SETUP.
Select [Video Setup] and then press OK.
Select [HDMI Setup] > [EasyLink Setup]
> [System Audio Control] > [On].
• To play the audio from the TV speakers,
select [Off], and then skip the following
steps.
Select [EasyLink Setup] > [Audio Input
Mapping].
Follow the onscreen instructions to map
the connected device to the audio inputs
on your home theater.
• If you connect your home theater
to the TV through an HDMI ARC
connection, make sure that the TV
audio is mapped to the ARC input on
your home theater.
EN
4 Use your home
theater
This section helps you use the home theater to
play media from a wide range of sources.
Before you start
• Make the necessary connections described
in the quick start guide and the user
manual.
• Switch the TV to the correct source for
your home theater (for example, HDMI,
AV IN).
(Play/
Pause)
/
SUBTITLE
DISC
AUDIO
SYNC
ZOOM
REPEAT
INFO
Discs
Your home theater can play DVDs, VCDs, and
CDs. It can also play discs that you’ve made at
home, such as CD-R discs of photos and music.
1
2
3
Insert a disc into the home theater.
If the disc does not play automatically, press
DISC.
Use the remote control to control play.
Play buttons
Button
Navigation
buttons
OK
Action
Navigate menus.
Up/Down:
• Video: Slow forward or slow
backward (VCD/SVCD can
only slow forward).
• Picture: Rotate the picture
clockwise or counter-clockwise.
Left/Right:
• Video: Fast backward or fast
forward. Press repeatedly to
change the search speed.
• Picture: Flip the picture vertically or horizontally.
Confirm an entry or selection.
Start, pause or resume play.
Stop play.
Skip to the previous or next
track, chapter or file.
Select subtitle language for video.
Access or exit the disc menu.
Select an audio language or
channel.
Zoom into a video scene or
picture.
Select or turn off repeat mode.
Access the advanced options
when you play your audio, video,
or media files (see 'Audio, video,
and picture options' on page
16).
Synchronize picture and sound
If the audio and video are not synchronized,
delay the audio to match the video.
1
2
While playing video, press and hold
AUDIO SYNC.
»» Audio sync menu is displayed.
Press the +/- or Navigation buttons to
synchronize the audio with the video, and
then press OK.
Note
•• Picture and sound can be synchronized through the
setup menu of your home theater, press
select [Audio Setup] > [Audio Sync].
SETUP,
Data files
Your home theater can play pictures, audio and
video files contained in a disc or a USB storage
device. Before you play a file, check that the file
format is supported by your home theater (see
'File formats' on page 23).
EN
14
1
2
Play the files from a disc or USB storage
device.
[Central Europe]
To stop play, press .
• To resume the video from where you
stopped, press
.
[Cyrillic]
Note
•• To play DivX DRM protected files, connect your home
theater to a TV through an HDMI cable.
Subtitles
If your video has subtitles in multiple languages,
select a subtitle language.
Note
•• Make sure that the subtitle file has the exact same
name as the video file. For example, if the video file is
named 'movie.avi', name the subtitle file as 'movie.srt'
or 'movie.sub'.
•• Your home theater supports the following file formats:
.srt, .sub, .txt, .ssa, .ass, smi, and .sami. If the subtitles do
not appear correctly, change the character set.
1
2
3
4
5
While playing video, press SUBTITLE to
select a language.
For DivX video, if the subtitles do not
appear correctly, continue the following
steps to change the character set.
Press
SETUP.
Select [Preference Setup] and then press
OK.
Select [DivX Subtitle] and then select a
character set that supports the subtitle.
Character Set
[Standard]
15
EN
Language
English, Albanian, Danish,
Dutch, Finnish, French,
Gaelic, German, Italian,
Kurdish (Latin), Norwegian,
Portuguese, Spanish,
Swedish and Turkish
[Greek]
[Hebrew]
[Chinese(Simp)]
Albanian, Croat, Czech,
Dutch, English, German,
Hungarian, Irish, Polish,
Romanian, Slovak, Slovene
and Sorbian
Bulgarian, Belorussian,
English, Macedonian,
Moldavian, Russian, Serbian
and Ukrainian
Greek
Hebrew
Simplified Chinese
VOD code for DivX
Before you purchase DivX videos and play
them on your home theater, register the home
theater on www.divx.com using the DivX VOD
code.
1
2
3
4
Press
SETUP.
Select [General Setup] and then press OK.
Select [DivX(R) VOD Code] and then
press OK.
Press OK again.
»» The DivX VOD registration code for
your home theater is displayed.
USB storage devices
Enjoy pictures, audio, and video stored on a
USB storage device such as an MP4 player or
digital camera.
What you need
• A USB storage device that is formatted
for FAT file system, and complies with the
Mass Storage Class.
Note
•• If you use a USB extension cable, USB HUB or USB
multi-reader, the USB storage device may not be
recognized.
•• You can connect to a digital camera if they can play the
files without using a special computer program.
1
2
3
4
2
Connect a USB storage device to the
(USB) connector on your home theater.
Press USB.
»» A content browser is displayed.
Select a file and then press OK.
Use the play buttons to control play (see
'Play buttons' on page 14).
Audio, video, and picture
options
Use advanced features when you play pictures,
audio and video files from a disc or a USB
storage device.
Audio options
For CDDA:
1
Press INFO repeatedly to cycle through
the following options:
• Show the current track information and
time.
• Disc Go To: Enter the disc time to skip
to a specific part of the disc.
• Track Go To: Enter the track time to
skip to a specific part of the track.
• Select Track: Select a specific track.
For MP3:
1
2
Press INFO to display the remaining
time of the current track.
Press INFO again to enter track time
mode, and then press the Numeric
buttons to input the track time.
»» The video options menu is displayed.
Depending on the video source, some
options are not available.
Press the Navigation buttons and OK to
select and change:
• [Title]: Select a specific title.
• [Chapter]: Select a specific chapter.
• [Track]: Select a specific track (for
VCD/SVCD only).
• [Audio]: Select audio language for
video.
• [Subtitle]: Select subtitle language for
video.
• [Angle]: Select video scenes recorded
in different camera angels.
• [TT Time]: Skip to a specific part of
the video by entering the title time.
• [Ch Time]: Skip to a specific part of
the video by entering the chapter time.
• [Disc Time]: Skip to a specific part of
the video by entering the disc time (for
VCD/SVCD only).
• [Track Time]: Skip to a specific part of
the video by entering the track time
(for VCD/SVCD only).
• [Preview]: Select a content preview for
disc.
• [Repeat]: Select a repeat mode.
• [Time Disp.]: Select the information of
time display.
Picture options
1
2
3
Press INFO to access picture preview
mode.
»» 12 thumbnail pictures are displayed.
Press
/ to go to previous or next
preview page.
Press the Navigation buttons and OK to
select a picture.
Video options
1
Press
INFO.
EN
16
Musical slideshow
If the picture and audio files are from the same
disc or USB storage device, you can create a
musical slideshow.
1
2
3
4
5
Select an audio track and then press OK.
Press
folder.
BACK and then go to the picture
Button
Numeric
buttons,
/
Navigation
buttons
Select a picture and then press OK to
start the slideshow.
Press
to stop slideshow.
Press
again to stop music.
PROGRAM
Radio
Listen to FM radio on your home theater, and
store up to 40 radio stations.
Note
•• AM and digital radio are not supported.
•• If no stereo signal is detected, or if fewer than five
stations are found, you are prompted to install the
radio stations again.
1
2
3
17
Connect the FM antenna to the
ANTENNA FM on your home theater.
• For the best reception, place the
antenna away from the TV or other
sources of radiation.
Press RADIO.
»» If you have already installed the radio
stations, the last channel that you
listened to is played.
»» If you have not installed any radio
stations, the message AUTO
INSTALL...PRESS PLAY appears on
the display panel. press
.
Use the remote control to listen or to
change radio stations.
EN
Action
Select a preset radio station.
Left/Right: Search for a radio
station.
Up/Down: Fine tune a radio
frequency.
Press to stop the installation of
radio stations.
Press and hold to erase the
preset radio station.
Manual: Press once to access
program mode, and press again
to store the radio station.
Automatic: Press and hold for
three seconds to reinstall the
radio stations.
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz. Switching
the tuning grid erases all preset radio stations.
1
2
3
Press RADIO.
Press .
Press and hold
(Play/Pause) to toggle
between 50 kHz or 100 kHz.
MP3 player
Connect a MP3 player to play audio files.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1
2
Using the 3.5mm stereo audio cable,
connect the MP3 player to the MUSIC
iLINK connector on your home theater.
Press SOURCE repeatedly until MUSIC
I-LINK appears on the display panel.
3
Press the buttons on the MP3 player to
select and play audio files.
•
6
Create MP3 files
Use your home theater to convert audio CDs
into MP3 files.
7
[Device]: Select the USB storage
device which you use to store the MP3
files.
Navigate to the right panel, select the
audio tracks and press OK.
• To select all tracks, navigate to [Select
All], and then press OK.
What you need
• An audio disc.
• A USB storage device.
Select [Start] and then press OK to start
the MP3 conversion.
»» A new folder which contains the MP3
files is created in the USB storage
device.
1
•
2
3
4
Connect a USB storage device to your
home theater.
Play your audio CD (CDDA).
Press CREATE MP3.
»» A confirmation message is displayed.
Select [Yes], and then press OK.
»» The create MP3 screen is displayed.
The right panel contains MP3 settings
and the left panel shows the audio
tracks.
CREATE MP3
Speed
Normal
Track01
Bitrate
128kbps
Track02
04:17
CRT ID3
Yes
Track03
03:58
Device
USB1
Track04
04:51
Track05
03:53
Track06
04:09
Track07
04:38
SUMMARY
Select Track
0
Time
00:00
Start
5
Exit
Select All
Note
•• Do not remove the USB and press any buttons when
the conversion is in progress.
•• DTS CDs and copy-protected CDs cannot be
converted.
•• Write-protected or password-protected USB storage
device cannot be used to store MP3 files.
Karaoke
TRACK
OPTIONS
To exit the menu, select [Exit], and
then press OK.
04:14
Available only in selected model and region
Play a Karaoke disc on your home theater and
sing along with the music.
What you need
• A Karaoke microphone.
• Karaoke discs.
Deselect All
Press the Navigation buttons and OK to
select and change:
• [Speed]: Select the write-to-file speed.
• [Bitrate]: Select the conversion quality.
• [CRT ID3]: Copy the tracks
information when converting to MP3
files.
Caution
•• To prevent loud feedback or unexpected noise, turn
the microphone volume to the minimum before you
connect the microphone to your home theater.
1
2
Connect a karaoke microphone to the
MIC connector on your home theater.
Switch your TV to the correct source for
your home theater.
EN
18
3
4
5
6
7
Play a karaoke disc.
Press VOCAL to turn off the vocals and
sing through the microphone.
Press MIC VOL +/- to change the
microphone volume.
For more karaoke setup, press KARAOKE.
»» A Karaoke setup page is displayed.
Press the Navigation buttons and OK to
select and change the settings.
• [Mic]: Turn the microphone on or off.
• [Echo Level]: Change the echo level.
• [Key]: Change the pitch to match your
voice.
• [Score]: Set the karaoke scoring.
Choose sound
This section helps you choose the ideal sound
for your video or music.
Sound mode
Select predefined sound modes to suit your
video or music.
1
19
Press SOUND repeatedly to select a
sound mode.
• MOVIE: Enjoy a cinematic audio
experience, specially enhanced for
movies.
• MUSIC: Recreate the original recording
environment of your music, in the
studio or at a concert.
• ORIGINAL: Experience the original
sound of your movies and music,
without added sound effects.
• NEWS: Hear every word with
optimized speech and clear vocals.
• GAMING: Enjoy thrilling arcade
sounds, ideal for action-packed video
games or loud parties.
EN
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
Press SURR repeatedly to select a
surround mode.
• 5CH STEREO: Enhanced stereo sound.
Ideal for party music.
• MULTI-CH/DOLBY PLII: Traditional
5.1 channel for a more relaxing
cinematic experience.
• STEREO: Two-channel stereo sound.
Ideal for listening to music.
Note
•• If the audio source is a 2.1 channel. multi-channel mode
will output 5-channel stereo sound.
5 Change settings
The home theater settings are already
configured for optimal performance. Unless
you have a reason to change a setting, we
recommend that you keep the default setting.
Picture and video settings
1
2
Note
•• You cannot change a setting that is grayed out.
•• To return to the previous menu, press
BACK. To
exit the menu, press
SETUP.
Language settings
Onscreen display language
1
2
Press
SETUP.
Select [General Setup] and then press OK.
• [OSD Language]: Select a display
language for menu.
Disc language
1
2
Press
SETUP.
Select [Preference Setup] and then press
OK.
• [Audio]: Select an audio language for
discs.
• [Subtitle]: Select a subtitle language
for discs.
• [Disc Menu]: Select a menu language
for discs.
Note
•• If your preferred disc language is not available, select
[Others] from the list, and enter the 4-digit language
code found at the end of this user manual.
•• If you select a language that is not available on a disc,
the home theater uses the default language of the disc.
Press
SETUP.
Select [Video Setup] and then press OK.
• [TV System]: Select a video format
supported by the TV.
• [TV Display]: Select a picture format
to fit the TV screen.
• [HDMI Setup]: [Wide Screen Format]:
For 16:9 wide screen TV display setting.
[HDMI Video]: Select the resolution of
the video signal being output from the
HDMI OUT.
• [Picture Settings]: Select color settings
for the video display on TV.
• [HD JPEG]: Enable or disable high
definition picture display.
Note
•• If you change a setting, make sure that the TV supports
the new setting.
Audio settings
1
2
Press
SETUP.
Select [Audio Setup] and then press OK.
• [HDMI Audio]: HDMI audio is
automatically down-mixed to two
channel for TV speakers. If you do not
want to output audio through your TV,
disable the HDMI audio.
• [Night Mode]: Select quiet or full
dynamic sound. Night mode decreases
the volume of loud sounds and
increases volume of sounds such as
speech. Applicable to Dolby Digital
encoded DVD discs only.
EN
20
Parental control settings
Energy saving settings
Password and Ratings
1
2
1
2
Press
SETUP.
Select [Preference Setup] and then press
OK.
• [Password]: Set or change your
password for parental control access.
If you do not have a password or have
forgotten your password, enter 0000.
• [Parental]: Enable maturity-based
restricted access for playback of DVDvideo that are recorded with ratings.
To play discs irrespective of the rating,
select [8 Adult].
Lock disc
1
2
Press
SETUP.
Select [General Setup] and then press OK.
• [Disc Lock]: Lock the disc to restrict
play. You can lock up to 20 discs on
your home theater.
Note
•• To play a locked disc, follow the onscreen instructions
to enter the password, and then press OK.
Display settings
1
2
21
Press
SETUP.
Select [Preference Setup] and then press
OK.
• [PBC]: Enable or disable the content
menu navigation of VCD and SVCD
discs with Play Back Control feature.
• [MP3/JPEG Display]: Select the
content display for MP3/JPEG files.
EN
Press
SETUP.
Select [General Setup] and then press OK.
• [Screen Saver]: Switch the home
theater to screen saver mode after 10
minutes of no activity.
• [Auto Standby]: Switch the home
theater to standby mode after 30
minutes of no activity when in disc or
USB mode.
• [Sleep Timer]: Switch the home
theater to standby mode after the
elapsed time.
• [Display Dim]: Set the brightness of
the home theater front panel display.
Restore default settings
1
2
3
Press
SETUP.
Select [Preference Setup] > [Default], and
then press OK.
Select [Reset] and then press OK to
confirm.
»» Your home theater is reset to its
default settings, except for parental
control setting.
6 Update software
Philips continually tries to improve its products.
To get the best features and support, update
your home theater with the latest software.
Compare the version of your current software
with the latest version on www.philips.com/
support. If the current version is lower than the
latest version available on the Philips support
website, upgrade your home theater with the
latest software.
Caution
•• Do not install a lower version of software than the
current version installed on your product. Philips is not
liable for problems caused due to software downgrade.
Step 1: Download the latest software
1
2
3
4
5
6
Connect a USB flash drive to your
computer.
In your web browser, go to www.philips.
com/support.
At the Philips Support website, find your
product and locate the Software and
drivers.
»» The software update is available as a
zip file.
Save the zip file in the root directory of
your USB flash drive.
Use the archive utility to extract the
software update file in the root directory.
Disconnect the USB flash drive from your
computer.
Step 2: Update the software
Check software version
Check the version of the current software
installed on your home theater.
1
2
3
Press
SETUP.
Select [Preference Setup] and then press
OK.
Select [Version Info.] and then press OK.
»» The software version is displayed.
Update software through
USB
What you need
• A USB flash drive that is FAT-formatted,
with at least 75MB of memory. Do not use
a USB hard drive.
• A computer with Internet access.
• An archive utility that supports the ZIP file
format.
Caution
•• Do not switch off the home theater or remove the
USB flash drive during the update.
1
2
3
Connect the USB flash drive containing the
downloaded file to your home theater.
• Make sure that the disc compartment
is closed and there is no disc inside.
Switch your TV to the correct source for
your home theater.
Follow the onscreen instructions to
confirm the update.
»» Once complete, the home theater
automatically switches off and restarts.
If it does not, disconnect the power
cord for a few seconds and then
reconnect it.
EN
22
7 Product
specifications
•
•
Amplifier
•
•
Note
•• Specifications and design are subject to change without
notice.
•
•
Region codes
The type plate on the back or bottom of the
home theater shows which regions it supports.
Country
DVD
Europe, United Kingdom
Asia Pacific, Taiwan, Korea
•
•
Signal system: PAL / NTSC
HDMI output: 480i/576i, 480p/576p, 720p,
1080i, 1080p
Audio
Latin America
Russia, India
Total output power: 1000W RMS (+/0.5dB, 30% THD)
Frequency response: 20 Hz-20 kHz / ±3
dB
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
Input sensitivity:
• AUX1/AUX2: 1 V
• Music iLink: 350 mV
Video
•
Australia, New Zealand
Video: .avi, .divx, .mpg, .mpeg,
Picture: .jpg, .jpeg
•
•
China
S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
Sampling frequency:
• MP3: 32 kHz, 44.1 kHz, 48 kHz
• WMA: 44.1 kHz, 48 kHz
Constant bit rate:
• MP3: 32 kbps - 320 kbps
• WMA: 48 kbps - 192 kbps
Radio
•
Media formats
•
DVD-Video, DVD+R/+RW, DVD-R/-RW,
DVD+R/-R DL, CD-R/CD-RW, Audio CD,
Video CD/SVCD, Picture files, MP3 media,
WMA media, DivX media, USB storage
device
•
•
Tuning range:
• Europe/Russia/China: FM 87.5-108
MHz (50 kHz)
• Asia Pacific/Latin America: FM 87.5-108
MHz (50/100 kHz)
Signal-to-noise ratio: FM 50 dB
Frequency response: FM 180 Hz-12.5 kHz
/ ±3 dB
File formats
USB
•
Audio: .mp3, .wma
•
23
EN
Compatibility: Hi-Speed USB (2.0)
•
•
Class support: USB Mass Storage Class
(MSC)
File system: FAT16, FAT32
Main unit
•
•
•
•
•
Power supply:
• Europe/China/Russia/India: 220-240V~,
50 Hz
• Latin America/Asia Pacific:
110-127V/220-240V~, 50-60 Hz
Power consumption: 105 W
Standby power consumption: ≤ 0.5 W
Dimensions (WxHxD):
435 x 56 x 344 mm
Weight: 3.0kg
Laser
•
•
•
•
Type: Semiconductor laser GaAIAs (CD)
Wave length: 645 - 665 nm (DVD), 770 800 nm (CD)
Output power: 6 mW (DVD), 7 mW
(VCD/CD)
Beam divergence: 60 degrees.
Subwoofer
•
•
•
•
Impedance: 4 ohm
Speaker drivers: 203 mm (8") woofer
Dimensions (WxHxD):
178 x 303 x 343 mm
Weight: 4.08 kg
Speakers
Center speaker:
• Speaker impedance: 4 ohm
• Speaker drivers: 1 x 76.2 mm (3") woofer
• Dimensions (WxHxD):
223 x 101.5 x 93.5 mm
• Weight: 0.6 kg
Front/Rear speaker:
• Speaker impedance: 4 ohm
• Speaker drivers: 1 x 76.2 mm (3") woofer
• Dimensions (WxHxD):
• Speakers: 90 x 185 x 105.5 mm
• Tall speakers: 247 x 1091 x 242 mm
• Weight:
• Speakers: 0.54 kg/each
• Tall speakers: 2.19 kg/each
Remote control batteries
•
2 x AAA-R03-1.5 V
EN
24
8 Troubleshooting
Warning
•• Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at www.
philips.com/support.
Main unit
The buttons on the home theater do not
work.
• Disconnect the home theater from the
power supply for a few minutes, then
reconnect.
Picture
No picture.
• Make sure that the TV is switched to the
correct source for the home theater.
• If this happens when you change the
TV system, press to open the disc
compartment, and then 439 on the
remote control to restore the default TV
system.
No picture on a TV connected through HDMI.
• Make sure that the HDMI cable is not
faulty. If it is faulty, replace it with a new
cable.
• If this happens when you change the
HDMI video resolution, press to open
the disc compartment, and then 304 on
the remote control to restore the default
setting.
• Wait for 10 seconds for auto recovery, or
change the HDMI video setting.
25
EN
Disc does not play high-definition video.
• Make sure that the disc contains highdefinition video.
• Make sure that the TV supports highdefinition video.
• Use an HDMI cable to connect to the TV.
Sound
No sound from home theater speakers.
• Connect the audio cable from your home
theater to your TV or other devices (see
'Connect audio from TV and other devices'
on page 11).
• Set up the audio for the connected device
(for HDMI connection only) (see 'Set up
the audio' on page 13).
• Reset your home theater to its factory
settings (see 'Restore default settings' on
page 21), then switch it off and switch on
again.
• On your home theater, press SOURCE
repeatedly to select the correct audio
input.
Distorted sound or echo.
• If you play audio from the TV through the
home theater, make sure that the TV is
muted.
Audio and video are not synchronized.
• 1) Press and hold AUDIO SYNC. 2) Press
the +/- or Navigation buttons within 5
seconds to synchronize the audio with the
video.
Play
Cannot play a disc.
• Clean the disc.
• Make sure that the home theater supports
the type of disc (see 'Media formats' on
page 23).
• Make sure that the home theater supports
the region code of the disc.
• If the disc is a DVD±RW or DVD±R disc,
make sure that it is finalized.
Cannot play a DivX file.
• Make sure that the DivX file is encoded
according to the 'Home Theater Profile'
with the DivX encoder.
• Make sure that the DivX file is complete.
DivX subtitles do not display correctly.
• Make sure that the subtitle file name is
the same as the movie file name (see
'Subtitles' on page 15).
• Select the correct character set (see
'Subtitles' on page 15).
Cannot read the contents of a USB storage
device.
• Make sure that the format of the USB
storage device is compatible with the
home theater.
• Make sure that the file system on the USB
storage device is supported by the home
theater.
'No entry' or 'x' sign appears on the TV.
• The operation is not possible.
EasyLink does not work.
• Make sure that the home theater is
connected to a Philips brand EasyLink TV,
and the EasyLink option is turned on (see
'Set up EasyLink (HDMI-CEC control)' on
page 12).
When you switch on the TV, the home theater
automatically switches on.
• This behavior is normal when you are using
Philips EasyLink (HDMI-CEC). To make the
home theater work independently, switch
off EasyLink.
EN
26
9 Notice
This section contains the legal and trademark
notices.
Copyright
This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
Trademarks
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, and the
double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license under U.S.
Patent Nos: 5,956,674; 5,974,380; 6,487,535
& other U.S. and worldwide patents issued
& pending. DTS, the Symbol, & DTS and the
Symbol together are registered trademarks
& DTS Digital Surround and the DTS logos
are trademarks of DTS, Inc. Product includes
software. DTS, Inc. All Rights Reserved.
DivX , DivX Ultra , DivX Certified and
associated logos are trademarks of Rovi
27
EN
Corporation or its subsidiaries and are used
under license.
DivX Ultra Certified to play DivX video
with advanced features and premium content.
ABOUT DIVX VIDEO: DivX is a digital video
format created by DivX, LLC, a subsidiary
of Rovi Corporation. This is an official DivX
Certified device that plays DivX video. Visit
divx.com for more information and software
tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This
DivX Certified device must be registered
in order to play purchased DivX Video-onDemand (VOD) movies. To obtain your
registration code, locate the DivX VOD section
in your device setup menu. Go to vod.divx.com
for more information on how to complete your
registration.
HDMI, and HDMI logo, and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC in
the United States and other countries.
CLASS 1
LASER PRODUCT
10 Index
A
audio from TV and other devices
audio input mapping
audio language for discs
audio options
auto standby
B
batteries
C
change password
character set
check current version
connect analog audio cable
connect coaxial audio cable
connect coaxial audio cable
connect composite video cable
connect FM antenna
connect HDMI cable
connect home theater
connect optical audio cable
connect speakers
connect to TV
connectors
consumer support
control play buttons
create MP3
D
disc menu
discs
display brightness
display menu for MP3/JPEG
display menu for VCD/SVCD
disposal
DivX
DivX subtitles
E
Easylink (HDMI-CEC)
Easylink audio setup
Easylink controls
11
12
20
16
21
24
21
15
22
11
11
11
10
5, 17
9, 10
8
11
8
9
5
4
14
18
20
14
21
21
21
4
15, 23
15
12
13
12
H
HDMI ARC
HDMI video
HDMI-CEC
9
20
12
K
karaoke
18
L
language settings
lock disc
20
21
M
main unit overview
menu language for discs
MP3 player
musical slideshow
5
20
17
17
N
night mode
20
O
one-touch play
one-touch standby
onscreen menu language
12
12
20
P
parental control
parental ratings
password
PBC (play back control)
picture options
picture settings
product serial number
program radio stations
21
21
21
21
16
20
4
17
EN
28
R
radio
recycling
remote control overview
repeat mode
restore default settings
rotate pictures
S
screen saver
setup menu
sleep timer
slideshow
sound mode
speakers placement
speakers setup
specifications
subtitle language for discs
supported file format
supported media formats
surround sound
synchronize picture and sound
system audio control
T
time search
titles
trademarks
troubleshooting
tuning grid
U
update software
USB storage device
V
video options
video resolution
VOD code for DivX
W
wireless rear audio
29
EN
17
4
6
14
21
14
21
20
21
17
19
8
11
23
20
23
23
19
14
12
16
16
27
25
17
22
15
16
20
15
9
Specifications are subject to change without notice
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
HTS5543_68_UM_V1.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising