Philips | 19PFL3403/98 | Owner's Manual | Philips LCD TV 19PFL3403/98 User manual

Philips LCD TV 19PFL3403/98 User manual
Register your product and get support at
www.philips.com/welcome
EN
USER MANUAL
19PFL3403
ENGLISH
Welcome
Know these
FRANÇAISE
safety symbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Dear PHILIPS product owner:
Thank you for your confidence in PHILIPS. You’ve
selected one of the best-built, best-backed
products available today. We’ll do everything in our
power to keep you happy with your purchase for
many years to come.
This “bolt of lightning” indicates
uninsulated material within your unit
may cause an electrical shock. For the
safety of everyone in your household,
please do not remove product covering.
The “exclamation point” calls attention
to features for which you should read
the enclosed literature closely to prevent
operating and maintenance problems.
WARNING: To reduce the risk of fire or electric
shock, this apparatus should not be exposed to rain
or moisture and objects filled with liquids, such as
vases, should not be placed on this apparatus.
CAUTION: To prevent electric shock, match wide
blade of plug to wide slot, fully insert.
For Customer Use
Enter below the Serial No. which is located
on the rear of the cabinet. Retain this
information for future reference.
Model No._______________________
Serial No. _______________________
EN-1
ESPAÑOL
Congratulations on your purchase,
and welcome to the “family!”
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ESPAÑOL
FRANÇAISE
ENGLISH
1.
Important safety instructions
Read before operating equipment
1.
Read and keep these instructions.
2.
Heed all warnings.
3.
Follow all instructions.
4.
Do not insert any strange object into the ventilation
slots.This might lead to damage of the TV.
5.
Do not use this apparatus near water.
6.
Clean only with a dry cloth.
7.
Do not block any of the ventilation openings.
Install in accordance with the manufacturers
instructions.
8.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and third grounding prong. The wide
blade or third prong are provided for your safety. When
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12.
Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to
avoid injury from tip-over.
•
The appliance does not appear to operate normally
or exhibits a marked change in performance;
•
The appliance has been dropped, or the enclosure
damaged.
17. Tilt/Stability - All televisions must comply with
recommended international global safety standards for
tilt and stability properties of its cabinet design.
•
Do not compromise these design standards by
applying excessive pull force to the front, or top,
of the cabinet which could ultimately overturn the
product.
•
Also, do not endanger yourself, or children, by
placing electronic equipment/toys on the top of the
cabinet. Such items could unsuspectingly fall from
the top of the set and cause product damage and/
or personal injury.
18. Wall or Ceiling Mounting - The appliance should be
mounted to a wall or ceiling only as recommended by
the manufacturer.
19. Power Lines - An outdoor antenna should be located
away from power lines.
20. Outdoor Antenna Grounding - If an outside antenna is
connected to the receiver, be sure the antenna system
is grounded so as to provide some protection against
voltage surges and built up static charges.
21. Object and Liquid Entry - Care should be taken so that
objects do not fall and liquids are not spilled into the
enclosure through openings.
22. Battery Usage CAUTION - To prevent battery leakage
that may result in bodily injury, property damage, or
damage to the unit:
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
•
Install all batteries correctly, with + and - aligned as
marked on the unit.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been
dropped.
•
Do not mix batteries (old and new or carbon and
alkaline, etc.).
•
Remove batteries when the unit is not used for a
long time.
15. This product may contain lead or mercury. Disposal of
these materials may be regulated due to environmental
considerations. For disposal or recycling information,
please contact your local authorities or the Electronic
Industries Alliance: www.eiae.org.
16. Damage Requiring Service - The appliance should be
serviced by qualified service personnel when:
•
The power supply cord or the plug has been
damaged;
•
Objects have fallen, or liquid has been spilled into
the appliance;
•
The appliance has been exposed to rain;
EN-2
23. For ventilation, leave at least 4” to 6” free all around
the TV. Do not place the TV on a carpet.
24. The equipment shall not be exposed to dripping or
splashing.
25. The equipment shall not be exposed to rain or
moisture and objects filled with liquids, such as vases,
shall be placed on the apparatus.
26. The apparatus must be connected to a mains socket
outlet with a protected earthed connection.
27. The appliance coupler is used as the disconnect device
of this apparatus, the disconnect device shall remain
readily operable.
2008 © Koninklijke Philips Electronics
N.V. All rights reserved. Specifications
are subject to change without notice.
Trademarks are the property of
Koninklijke Philips Electronics N.V. or
their respective owners.
Philips reserves the right to change
products at any time without being
obliged to adjust earlier supplies
accordingly.
The material in this manual is believed
adequate for the intended use of the
system. If the product, or its individual
modules or procedures, are used for
purposes other than those specified
herein, confirmation of their validity
and suitability must be obtained. Philips
warrants that the material itself does not
infringe any United States patents. No
further warranty is expressed or implied.
Philips can’t be held responsible neither
for any errors in the content of this
document nor for any problems as a
result of the content in this document.
Errors reported to Philips will be adapted
and published on the Philips support
website as soon as possible.
Safety symbols
Know these safety symbols:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This “bolt of lightning”
indicates uninsulated material
within your unit may cause an
electrical shock. For the safety
of everyone in your household, please do
not remove product covering.
The “exclamation point” calls
attention to features for
which you should read the
enclosed literature closely to
prevent operating and
maintenance problems.
If the TV is mounted on a swivel base or
swivel arm, ensure no strain is placed on
the power cord when the TV is swivelled.
Strain on the power cord can loosen
connections. This may cause arcing and
result in fire.
Pixel characteristics
The LCD panel has a high number of
colour pixels. Although it has effective
pixels of 99.999% or more. Black dots or
bright points of light (red, green or blue)
may appear constantly on the screen.
This is a structural property of display
(within common industrial standard ) and
is not a malfunction. This does not affect
the performance of the product.
EN-3
FRANÇAISE
ENGLISH
Table of contents
1. Important safety instructions������������������� 2
2. Important��������������������������������������������������� 5
Select your TV in PC mode ������������������������������� 18
7. Connect devices�������������������������������������� 19
2.1
Product information��������������������������������������������� 5
7.1
Connection overview����������������������������������������� 19
2.2
Screen care����������������������������������������������������������� 5
7.2
Select connection quality ����������������������������������� 20
2.3
Environmental care����������������������������������������������� 5
7.3
Connect devices������������������������������������������������� 21
2.4
Regulatory notices ����������������������������������������������� 5
3. Your TV������������������������������������������������������ 6
ESPAÑOL
6.12
3.1
TV overview��������������������������������������������������������� 6
3.2
Remote control����������������������������������������������������� 6
4. Get started������������������������������������������������ 7
4.1
Position the TV����������������������������������������������������� 7
4.2
Wall mount the TV����������������������������������������������� 7
4.3
Install the remote control batteries��������������������� 8
4.4
Connect the antenna or cable ����������������������������� 8
4.5
Connect the AC power cord������������������������������� 9
4.6
Switch on the TV�������������������������������������������������� 9
4.7
Manage cable��������������������������������������������������������� 9
5. Use your TV ������������������������������������������� 10
5.1
Switch your TV on/off or to standby����������������� 10
5.2
Watch TV ����������������������������������������������������������� 10
5.3
Watch channels from a cable receiver box ������� 11
5.4
Watch a DVD����������������������������������������������������� 11
6. Use more of your TV������������������������������� 12
6.1
Remote control overview����������������������������������� 12
6.2
Use teletext of the remote control������������������� 12
6.3
Use install menu������������������������������������������������� 13
6.4
Change picture and sound settings�������������������� 14
6.5
Use Smart mode������������������������������������������������� 14
6.6
Set the clock������������������������������������������������������� 16
6.7
Set the sleeptimer����������������������������������������������� 16
6.8
Reduce the NR��������������������������������������������������� 17
6.9
Adjust the skin tone������������������������������������������� 17
6.10
Use auto lock ����������������������������������������������������� 17
6.11
Use your TV as a PC monitor ��������������������������� 18
EN-4
8. Glossary��������������������������������������������������� 23
9. Troubleshooting��������������������������������������� 24
9.1
Technical specifications��������������������������������������� 25
10. Index��������������������������������������������������������� 26
2.1
Product information
The model and serial number are on the rear of the
TV and on the packaging.
2.3
Environmental care
End of life directives - Recycling
Philips has paid a lot of attention to
producing an environmentally friendly product.
Your new TV contains several materials that can
be recycled for new uses. At the end of its life,
specialized companies can dismantle and recycle this
set. This will minimize the amount of materials being
disposed of. Please be sure to dispose of this set in
accordance with all state and local regulations.
ENGLISH
Important
FRANÇAISE
2.
Recycling your packaging
ESPAÑOL
The packaging of this product is intended to
be recycled. Contact your local authorities for
information on how to recycle the packaging.
Disposing used batteries
This TV consumes minimal energy in standby mode
to minimise environmental impact. The active power
consumption is given on the type plate at the rear of
the TV.
The supplied batteries do not contain mercury
or cadmium. Dispose supplied and all other used
batteries according to your local regulations.
2.2
The TV consumes minimal energy in standby mode
to minimise environmental impact. Active power
consumption is displayed at the back of the TV.
Screen care
Power consumption
2.4
Regulatory notices
BB WARNING
•
Turn off and unplug the AC power cord before
cleaning the screen.
•
Clean the screen with a soft, dry cloth. Do not
use substances such as household cleaning agents
as these may damage the screen.
•
To avoid deformations or color fading, wipe off
water droplets as soon as possible.
•
Do not touch, push, rub or strike the screen
with hard objects as this may damage the screen
permanently.
•
Where possible, avoid stationary images that
remain on-screen for extended periods of time.
If you must use stationary images, reduce the
screen contrast and brightness to avoid screen
damage.
To reduce the risk of fire or electric shock, this
apparatus should not be exposed to rain or
moisture. Objects filled with liquids, such as
vases, should not be placed on this apparatus.
EN-5
ENGLISH
3.
Your TV
This section gives you an overview of commonlyused TV controls and functions.
FRANÇAISE
3.1
TV overview
Side controls and indicators
DD Note
For more information about connections, see
Section 7 Connect devices.
3.2
VOLUME
MENU
ESPAÑOL
Use the TV rear connectors to connect to the
antenna and permanent devices such as a highdefinition disc player or DVD player.
CHANNEL
POWER
Remote control
4
1
3
2
2
3
1
4
5
9
5
1. POWER
8
2. CHANNEL +/VOLUME
3. MENU
7
MENU
4. VOLUME +/-
6
CHANNEL
5.
Remote control sensor/ power indicator
POWER
POWER
Side connectors
PC IN
VGA
AUDIO IN
HDMI
CVI
Y
Pb
Pr
L
R
75 Ω
Use the TV side connectors to connect to mobile
devices such as a camera or game console. You can
also connect to the headphone.
Rear connectors
1.
Standby / ON
2.
Source selection
3.
Color buttons
4.
Format button
5.
Cursor buttons
6.
Channel selection
7.
Volume selection
8.
MENU button
9.
OK button
PC IN
VGA
AUDIO IN
HDMI
CVI
Y
Pb
Pr
L
R
75 Ω
Cable
For more information about the remote control, See
Remote control overview section.
EN-6
4.1
Position the TV
Depending on the size of your TV screen, purchase
one of the following wall brackets:
TV screen
size (inches)
VESA-compatible
wall bracket type
(millimeters)
Screw type
19”
100 x 100mm
Metric 4 x 10mm
BB WARNING
• Do not insert the power plug into the wall
socket before all the connections are made.
• Large screen TVs are heavy. Two people are
required to carry and handle the TV.
Wherever you decide to position your TV, ensure
that you always have easy access to the AC power
cord or plug to disconnect the TV from the power.
If the TV is mounted on a swivel base or swivel arm,
ensure no strain is placed on the AC power cord
when the TV is swivelled. Strain on the AC power
cord can loosen connections. This may cause arcing
and result in fire.
Step 2 Remove the TV stand
DD Note
These instructions are only applicable to TV
models with mounted stands. If your TV stand is
not mounted, skip to Step 3 Connect cables.
1.
Carefully place the TV face down on a flat, stable
surface that is covered by soft cloth. The cloth
should be thick enough to protect your screen.
2.
Using a cross-head screwdriver (not supplied),
unscrew the four bolts that secure the stand to
the TV.
For ideal viewing conditions, position the TV where
light does not fall directly on the screen.
The ideal viewing distance for watching TV is three
times its screen size.
Kensington security slot
Your TV is equipped with a Kensington Security Slot
at the back of the TV.
If you connect an anti-theft Kensington lock
(not supplied), position the TV within reach of a
permanent object that can be attached to the lock.
4.2
ENGLISH
This section describes how to position and connect
your TV, and how to perform your first-time
installation.
Step 1 Purchase a VESA-compatible wall
bracket
FRANÇAISE
Get started
Wall mount the TV
BB Warning
Wall mounting of the TV should only be
performed by qualified installers. Koninklijke
Philips Electronics N.V. Bears no responsibility
for improper mounting that results in accident
or injury.
EN-7
ESPAÑOL
4.
Firmly pull the stand from the bottom of the
TV. Place both the stand and bolts in a secure
location for future reinstallation.
ESPAÑOL
FRANÇAISE
ENGLISH
3.
1.
Open the battery cover on the back of the
remote control.
2.
Insert the 2 batteries supplied. Make sure the
+ and - ends of the batteries line up correctly.
(inside of case is marked).
3.
Close the cover.
4.4
Connect the antenna or cable
Connect to an antenna
Step 3 Connect cables
Connect the antenna cable, AC power cord and all
other devices to the back of the TV as described in
the following sections and in Section 7 Connect devices.
Step 4 Secure the VESA-compatible wall
bracket to the TV
PC IN
VGA
AUDIO IN
HDMI
CVI
Y
Pb
Pr
L
R
75 Ω
BB Warning
Only use the specified bolts (M4 x 10mm)
to secure the VESA-compatible wall
bracket to your TV. The specified bolts are
designed to match the weight of your TV.
1.
Locate the TV ANTENNA connector on the
back of the TV.
2.
DD Note
Depending on your VESA-compatible wall
bracket, you may need to separate the mounting
plate from the wall bracket for easier installation.
Refer to your VESA-compatible wall bracket
documentation for instructions.
Connect one end of an antenna cable (not
supplied) to the TV ANTENNA connectors. Use
an adaptor if the antenna cable does not fit.
3.
Connect the other end of the antenna cable to
your antenna outlet, ensuring that the cable is
tightly secured at both ends.
Connect to a cable receiver box
ANTENNA
100x100 mm
PC IN
VGA
AUDIO IN
HDMI
CVI
Y
Pb
Pr
L
R
75 Ω
4.3
Install the remote control batteries
Cable Receiver Box
A
A
A
A
A
A
A cable receiver box can be connected to the TV
through the following connections:
• ANTENNA (75Ω)
•
A/V (Composite Video and Audio)
EN-8
ANTENNA
PC IN
VGA
AUDIO IN
PC IN
VGA
AUDIO IN
HDMI
CVI
Y
Pb
Pr
L
R
75 Ω
•
YPbPr (Component Video Input)
•
HDMI
VOLUME
4.6
Switch on the TV
MENU
4
3
2
Before you switch on the TV, check that the
mains
1
cord is properly connected. Press POWER
button
at the side of the TV, or press 5power button on
the remote control. The TV normally takes 10-15
seconds to start up and the following screen appears
the first time you turn on the TV.
CHANNEL
POWER
Connect a cable receiver box through
component video input or HDMI
ANTENNA
VOLUME
PC IN
VGA
AUDIO IN
HDMI 1
CVI
Pr
Pb
L
MENU
R
75 Ω
Cable Receiver
Box
CHANNEL
ESPAÑOL
Y
PC IN
VGA
AUDIO IN
HDMI
CVI
Y
Pb
Pr
L
R
POWER
75 Ω
POWER
4.7
4.5
Connect the AC power cord
BB Warning
Verify that your voltage corresponds with
the voltage printed at the back of the TV.
Do not insert the AC power cord if the
voltage is different.
Manage cable
Route your AC power cord, antenna cable and all
other device cables through the cable holder at the
back of the TV. The holder helps keep your cables
tidy and easily manageable.
To connect the AC power cord
PC IN
VGA
AUDIO IN
HDMI
CVI
Y
Pb
Pr
L
R
75 Ω
AC IN
1.
ENGLISH
S-Video and Audio
FRANÇAISE
Cable Receiver Box
•
Locate the power connector at the back of the
TV.
The location of the power connector varies
according to TV model.
2.
Insert the AC power cord fully into the TV
power connector.
3.
Connect the AC power cord plug to the power
outlet. Ensuring that the cord is tightly secured
at both ends.
EN-9
CHANNEL
POWER
ENGLISH
1
Use your TV 5
5.
FRANÇAISE
2
5.2
This section helps you perform basic TV operations.
5.1
Switch your TV on/off or to standby
To Switch the TV on
• If the standby indicator is off, press . POWER
at the side of the TV.
•
Watch TV
Switch channels
•
Press a number (1 to 9) or press CH +/- on
your remote control.
•
Press A/CH to return to the previously viewed
TV channel.
If the standby indicator is on, press . on the
remote control.
VOLUME
ESPAÑOL
MENU
CHANNEL
POWER
POWER
DD Note
You can also switch channels by pressing
CHANNEL +/- at the side of the TV.
Adjust volume
•
Press VOL+/- on your remote control.
•
Press MUTE on your remote control to mute
the sound. Press MUTE again or press VOL+/to restore the sound.
To Switch to standby
• Press . on the remote control.
To switch on from standby without the remote
control.
• Press . POWER at the side of the TV to
switch the TV off.
•
Press . POWER again to switch the TV on.
To switch off
• Press . POWER at the side of the TV.
EN-10
DD Note
You can also switch volume by pressing
VOLUME +/- at the side of the TV.
1.
Switch on the cable receiver box.
The picture from your cable receiver box might
appear automatically on your screen.
2.
Use the remote control of your cable receiver
box to select channels.
ENGLISH
Watch channels from a cable receiver
box
FRANÇAISE
5.3
If the picture does not appear
Press SOURCE repeatedly to select the
connected cable receiver box and wait a few
seconds for the picture to appear.
ESPAÑOL
1.
2.
Press OK.
3.
Use the remote control of your cable receiver
box to select channels.
5.4
Watch a DVD
1.
Insert a DVD disc in your player.
2.
Press Play > on the remote control of your
player.
The picture from the player might appear
automatically on your screen.
If the picture does not appear
1.
Press SOURCE repeatedly to select the correct
source and wait a few seconds for the picture
to appear.
2.
Press OK.
EN-11
ENGLISH
6.
Use more of your TV
format section.
This section describes the advanced features of your
TV.
Remote control overview
FRANÇAISE
6.1
2
ESPAÑOL
15
14
6. SMART MODE
Selects a picture setting.
7. CH +/Switches to the next or previous channel.
1
16
5. CURSOR BUTTONS Î ï Í Æ
To navigate through the menus.
3
4
8. NUMBER BUTTONS
Selects a channel, page or setting.
9. A/CH
Returns to the previously-viewed channel.
10. STATUS/EXIT
Displays programme information, if available.
5
13
12
11. VOL +/Increases or decreases volume.
6
12. MUTE
Mutes or restores sound.
11
7
13. MENU
Toggles the menu on or off.
8
10
9
14. OK
Press to activate a setting.
15. INCR. SURR
Adds greater depth and dimension to the TV
sound.
16. TIMER
Sets the TV to turn itself off within a certain
time.
6.2
1.
. POWER
Switches the TV on from standby or back to
standby.
2. SOURCE
Selects connected devices.
3. DUALI-II
Selects Mono, Stereo, Dual I, Dual II, Nicam
Mono, Nicam Stereo, Nicam Dual I, Nicam Dual
II.
DD Note
The sound mode selections depend on TV
program and broadcast TV channel of that region.
4. FORMAT
Selects a picture format. See Change Picture
EN-12
1.
Use teletext of the remote control
Teletext on/off
2.
Teletext hold
Freezes the teletext page.
3.
Teletext reveal/conceal
Toggles between conceal and reveal mode.
4.
Teletext enlarge
Enlarges context to two times larger.
5.
These four color buttons allow you to access
the item or the page indicated by corresponding
color in teletext.
DD Note
Teletext is only available in some of the Asia
Pacific TV systems.
•
Manual store • Manual store: Activates auto search channel
frequency or press number keys to show your
desired channel frequency.
Press MENU on the remote control to display
the main menu.
• Prog. no: Use Î or ï to adjust the channel
number in the manual store menu.
• Finetune: Manually fine tunes analogue
channels when reception is poor.
ENGLISH
This section describe how to set the language and
store the channel of the TV.
1.
first be connected to your TV.
Use install menu
FRANÇAISE
6.3
•
2.
Press Î or ï to select Install and press Æ to
enter it.
3.
Press Î or ï to highlight the item you want to
adjust and press Æ to confirm the change.
4.
Press MENU to exit.
Channel setting • Channel edit: Sets up a favorite list of your
own with preferred TV channels.
• Channel swap: Exchange the channel. Toggle
between From, To, and Exchange.
• Name edit: Assigns or changes a channel
name to a channel for which a name has not
yet been used.
1. Press Î or ï to edit name and press Æ to
move to the next character.
Main control
Install
Picture
Language
Sound
Auto store
Features
Manual store
Install
Channel setting
2. Press Í to confirm the first character and
press Æ to confirm the last character.
3. Press Æ to confirm the name.
• Channel sort: Sorts or groups channels.
Factory reset
•
Summary of install settings
•
Language - Select a language of your interface.
•
Auto store - Automatically sets up the TV for
the broadcast or cable channels available in your
area.
Factory reset - Allows you to reset most of
the picture and sound settings to their default
factory levels. Select No or Yes.
DD Note
If you reset the TV to the factory settings, all
your present setting on picture, sound, and other
feature settings will be erased and replaced by
the manufacture’s default settings. However, your
auto lock access code will not be erased.
DD Note
Immediately after unpacking and plugging in your
new television, run the auto store function to set
up the TV for the broadcast or cable channels
available in your area. If you do not run the
auto store function to set up the channels, your
television may not operate properly.
After you have run auto store, check out the
results. Press CH +/- on the remote control and
see which channels you can select.
Remember, an antenna or cable TV signal must
EN-13
ESPAÑOL
• Store: Stores or sets the setting of manual
store menu.
ENGLISH
6.4
Change picture and sound settings
Change picture settings
This section describes how to adjust your picture
settings.
Press MENU on the remote control.
ESPAÑOL
FRANÇAISE
1.
Summary of picture settings
The following picture settings can be configured.
Depending on the format of the picture source, some
picture settings might not be available.
•
Smart mode - Displays a list of predefined
picture and sound setting.
•
Contrast - Sets the level of white in the picture.
•
Brightness - Sets the brightness of the picture.
•
Color - Sets the level of saturation.
•
Sharpness - Sets the sharpness of fine details.
•
Tint - Adjusts the color balance between red
and green.
•
Color temp - Sets the color temperature to
Normal, Warm or Cool.
•
Picture format - Changes the format of the
picture.
2.
Press ï or Æ to select the Picture menu.
3.
Press Î or ï to select the one of the picture
settings, and press Æ to enter the setting.
4.
Press Î or ï to adjust the setting, and press
OK to confirm the change.
6.5
5.
Press Menu to exit.
1.
Press SMART MODE on the remote control
to set your TV to a predefined picture and sound
setting.
2.
Press Î or ï to select one of the following
settings:
•
Personal - The customized settings you defined
by using the Picture menu.
•
Vivid - Vivid picture settings and clear sound for
high action.
•
Standard - For normal TV viewing.
•
Movie - Brilliant picture settings for a cinematic
experience.
•
Game - Optimized for PCs, games consoles and
play stations.
•
Power saver - Eco friendly settings for lower
power consumption.
Main control
Picture
Picture
Smart mode
Sound
Contrast
Features
Brightness
Install
Color
Sharpness
Tint
Color temp
Picture format
EN-14
Use Smart mode
•
16:9 subtitle
Display 4:3 pictures using the full surface of the
screen leaving the subtitles visible.
•
Wide screen
Stretches the classic 4:3 format to 16:9.
Press Î or ï to select a picture format.
•
Super zoom
Removes the black bars on the side of 4:3
broadcasts with minimal distortion.
ENGLISH
Press FORMAT on the remote control to enter
the Picture format menu.
2.
•
Movie expand 16:9
Scales the classic 4:3 format to 16:9.
4:3
Displays the classic 4:3 format.
DD Note
•
•
Any adjustment of brightness, color, contrast
of sharpness will be stored into personal at
smart mode section.
•
For 720p/1080i/1080p, the default picture
format will be Wide screen at HD and HDMI
modes. And the picture format function will
not be accessible.
•
For PC mode, the default picture format will
be Full screen and picture format function can
be accessible 4:3 and Full screen.
Movie expand 14:9
Scales the classic 4:3 format to 14:9.
EN-15
FRANÇAISE
1.
•
ESPAÑOL
Change picture format
6.6
This section describes how to adjust sound settings.
1.
Press MENU on the remote control and press
ï to select Sound.
Main control
FRANÇAISE
ENGLISH
Adjust sound settings
Set the clock
This section describes how to set the time.
1. Press MENU on the remote control and select
Features > Clock.
Main control I Features
Sound
Picture
Equalizer
Sound
Incredible surround
Features
AVL
Timer
Clock
Clock
Start time
--
:
--
AM
Stop time
Install
ESPAÑOL
Sleep timer
2.
Press Æ to enter the list.
2.
Press Æ to enter the list.
3.
Press Î or ï to select one of the following
settings:
3.
Press Î or ï to set the time.
(hour/minute/AM or PM)
4.
Press OK to confirm.
Summary of sound settings
•
•
•
Equalizer - Changes the audio frequencies
with different central frequencies to create a
completely new and different sound depending
on your favorite.
Incredible surround - Allows you to select
the modes for more spatial or surround sound
reproduction dependent on the broadcasted
signals or signals from external inputs received.
Select On or Off.
6.7
Set the sleeptimer
Sleeptimer switches the TV to standby after a defined
period of time.
1.
AVL (Automatic volume leveling) - Reduces
sudden volume changes, for example, during
commercials or when switching from one
channel to another.
Select On or Off.
Press MENU on the remote control and select
Features > Sleeptimer.
Main control I Features
Timer
Sleeptimer
Clock
Start time
Stop time
Sleep timer
EN-16
2.
Press Æ to enter the Sleeptimer bar.
3.
Press Î or ï to set the sleep time from zero to
180 minutes. If set to zero minute, the Sleeptimer
is switched off.
4.
Press OK to activate the Sleeptimer or press
sleep button on the remote control.
6.10
This section describes how to filter out and reduce
the image noise and improves picture quality when
receiving weak video signals.
1. Press MENU on the remote control and select
Features > NR.
Use auto lock
Lock TV channels and prevent your children from
watching unsuitable content of programmes.
Set or change your PIN
1. Press MENU on the remote control and select
Features > Auto lock.
Main control
Main control
NR
On
NR
Off
Features
Access code
Timer
NR
Skin tone
Skin tone
Auto lock
Auto lock
Source list
ESPAÑOL
Features
Timer
Source list
2.
Press Æ to enter the list.
3.
Press Î or ï to select on or off.
4.
Press MENU to exit.
6.9
2.
PressMain
Æcontrol
to enter.
3.
Enter a 4-digit PIN with the number buttons on
Lock program
Timer
the remote control.
Change code
NR
• If you have a PIN, enter
your current PIN.
Clear all
Skin tone
Features
Auto lock
• If you do not have a PIN, enter the default
code 0000.
Adjust the skin tone
Auto lock
Source list
This section describes how to adjust the complexion.
1. Press MENU on the remote control and select
Features > Skin tone.
• If you have lost your PIN, enter master code
0711.
4.
Press MENU to exit.
Main control
Features
ENGLISH
Reduce the NR
FRANÇAISE
6.8
Skin tone
Timer
Bright
NR
Normal
Skin tone
Rich
Auto lock
Source list
2.
Press Æ to enter the list.
3.
Press Î or ï to select bright, normal or rich.
4.
Press MENU to exit.
EN-17
Main control
Features
Access code
Timer
NR
1.
Press MENU on the remote control and select
Features > Auto lock > Lock program.
Main control
FRANÇAISE
ENGLISH
Skin tone
Auto lock
To lock
program
AfterSource
yourlistpersonal access code has been set, you
are ready to select the channels or inputs you want
to block out or censor.
Features
Lock program
NR
Change code
Skin tone
Clear all
ESPAÑOL
Source list
2.
Press Æ to enter.
3.
Use the number buttons to enter the channel
which you are going to block or press Î or ï to
block the current channel.
Press MENU to exit.
DD Note
1. You can block additional channels by using the
number buttons to jump to another channel.
2.
Remember that 0000 is the default auto lock
code. If your access code has been changed by
someone other than you (a child, for example)
or you have forgotten the code, you can always
get in by inputting the default code.
EN-18
Use your TV as a PC monitor
Using a VGA cable connects a PC to your TV as a PC
monitor.
BB Caution
Before you connect your PC, set the PC monitor
refresh rate to 60Hz.
Auto lock
Timer
Auto lock
4.
6.11
6.11.1. Supported screen resolutions
The following screen resolutions are supported in
PC mode:
Resolution
Refresh rate
640 x 480
800 x 600
1024 x 768
1280 x 768
1440 x 900
60Hz
60Hz, 56Hz
60Hz
60Hz
60Hz, 75Hz
EE 1400 x 900 is recommended resolution.
6.12
Select your TV in PC mode
1.
Press MENU on the remote control and select
Features > Source list.
2.
Select PC and press OK to confirm your choice.
3.
If necessary, adjust the picture settings as
described in Change picture settings section.
4.
Press MENU to exit.
EE Tip
Set the picture format to Full screen or 4:3 in PC
mode.
Connection overview
ENGLISH
7.1
AUDIO IN
HDMI
2
CVI
PC IN
Y
Pb
Pr
L
R
3
VGA
AUDIO IN
HDMI
CVI
Y
Pb
Pr
Rear connectors
Side connectors
1. HDMI
HDMI input connectors for DVD players,
digital receivers, game consoles and other highdefinition devices.
5. Headphones
Stereo Mini Jack.
4. Antenna input / 75Ω
6
7
8
SIDE AV
4
3. CVI
Component video input (Y Pb Pr) and Audio L/R
connectors for DVD, digital receiver or game
console, etc.
R
75 Ω
75 Ω
2. PC IN
VGA, Audio connectors for PC.
L
L-AUDIO-R
PC IN
VGA
VIDEO IN
1
S-VIDEO
5
6. AUDIO L/R
Audio L/R input connectors for composite and
S-Video devices.
7. VIDEO IN
Video input cinch connector for composite
devices.
8. S-VIDEO
S-Video input connector for S-Video devices.
EN-19
FRANÇAISE
Connect devices
ESPAÑOL
7.
ENGLISH
7.2
Select connection quality
This section describes how you can enhance your
audio visual experience by connecting your devices
with the best possible connectors.
7.2.1.
HDMI - Highest quality
HDMI produces the best audio visual quality possible.
Both audio and video signals are combined in one
HDMI cable, providing an uncompressed, digital
interface between your TV and HDMI devices. You
must use HDMI to experience full high-definition
video.
S-Video - Good quality
An analogue connection, S-Video provides better
picture quality than composite video. When
connecting your device with S-Video, plug the
S-Video cable to the S-Video connector on the side
of the TV. You must connect a separate Audio L/R
cable from the device to the red and white Audio L/R
connectors on the side of the TV.
ESPAÑOL
FRANÇAISE
7.2.3.
Component video
HDMI Audio L/R
red, gree, blue
red, white
S-video
audio/video S-vide
Component
Audio
L/R
S-Video video Composite
Audio
L/R cabke
-Red,
White
yellow,
red,
white
red, gree, blue
red,
white
HDMI
Component
video - BasicAudio
7.2.4. Composite
qualityL/R
EE Tip
red, gree, blue
red, white
If the device only with a DVI connector, use a
Composite video provides basic analogue
DVI-HDMI adaptor to connect your device to a
connectivity, usually combining a (yellow) video cinch
HDMI connector at the back of the TV. You must
cable with (red and white) Audio L/R cinch cable.
connect a separate audio cable from the device
Match the cable colors when connecting to the
to the AUDIO L/R at SIDE AV.
composite Video and Audio L/R input connectors on
S-video
the side of the TV.
7.2.2.
Component (Y Pb Pr) - Higher quality
Component (Y Pb Pr) video provides better picture
quality than S-Video or composite video connections.
Though component video supports high-definition
signals, picture quality is lower than HDMI and is
analogue. Also, connect a Audio L/R cable to the
red and white Audio L/R input connectors at CVI 1/
CVI 2.
Component video
red, gree, blue
Audio L/R
red, white
Component
Component
video
Component
videovideo
cable
-Red,
Green,
Blue
red,
gree,
blue
red,
gree,
blue
EN-20
S-video
Audio
L/R
Audio
L/R
Audio
L/R cabke
-Red,
red,
white
red,White
white
Compositeaudio/video
audio/video cable
Composite
-Yellow, Red, White
yellow, red, white
S-video
S-video
Composite
Compositeaudio/video
audio/video
yellow,
yellow,red,
red,white
white
TV
L - AUDIO - R
S-VIDEO
VIDEO IN
CC Caution
Disconnect the AC power cord before
connecting devices.
DD Note
Different types of connectors may be used
to connect a device to your TV depending on
availability and your needs.
Connect a cable receiver box with RF In/
Outputs antenna TV
TV
Pr
Pb
L
SIDE AV
VIDEO
OUT
S-VIDEO
A
VIDEO IN
S-VIDEO
B
OUT
VIDEO
OUT
Connect VCR, DVD player, or other devices
with RCA connectors
SIDE AV
L AUDIO R
OUT
Cable Receiver Box
B
OR
TO TV
L AUDIO R
CABLE IN
Cable TV signal
R
75 Ω
CABLE IN
B
TV
CVI
Y
FRANÇAISE
C
When connecting composite or component cables,
match the cable colors to the connectors on the TV.
ESPAÑOL
This section describes how to connect a selection of
devices with different connectors. Note that different
types of connectors may be used to connect a device
to your TV. The following sections describe examples
only, other configurations are possible.
ENGLISH
Connect a cable receiver box with Audio/Video
output
Connect devices
L - AUDIO - R
7.3
A
L AUDIO R
OUT
VIDEO
OUT
S-VIDEO
AV Player with A/V Connectors
S-VIDEO
Cable Receiver Box
A
Cable TV signal
EN-21
ENGLISH
Connect DVD player or other video devices
with component video connectors
A
TV
PC IN
ESPAÑOL
FRANÇAISE
VGA
AUDIO IN
CVI
HDMI
Y
Pb
Pr
L-AUDIO-R
Y
Pr
Pb
L
Accessory Device Equipped with
Component Video Outputs
R
75 Ω
B
Connect DVD player with a HDMI connector
TV
PC IN
VGA
AUDIO IN
CVI
HDMI
Y
Pr
Pb
L
R
75 Ω
DVD Player
A
Connect PC (monitor) with a VGA connector
A
TV
B
PC IN
VGA
AUDIO IN
CVI
HDMI
Y
Pb
Pr
L
R
75 Ω
Computer
EN-22
Audio Video (A/V)
A term often used when discussing a channel on a TV receiver or on video equipment,
which has been especially designed to accept VCR audio-video signals. This channel
automatically activates special circuitry within the TV set to prevent picture distortion
and skewing. It is also used for audio-video processors, which handle both types of
signals.
CVBS
Composite Video Baseband Signal. In broadcast television this refers to the video signal,
including the color information and syncs.
Component Video
Input (Y Pb Pr)
Component Video Input is a type of connection that uses a cinch-type connector
to allow cable receiver boxes or analog DVD players to connect a signal to the TV.
By offering the cinch-type input (YPbPr) the primary colors, red, green and blue are
connected from a cable receiver box directly into the TV allowing for the signal to
display on the screen.
HDTV
The generally agreed upon definition of HDTV is approximately twice the vertical and
horizontal picture resolution of today’s NTSC TV, which essentially makes the picture
twice as sharp. HDTV also has a screen ratio of 16:9 as compared with most of today’s
TV screens, which have a screen ratio of 4:3. HDTV offers reduced motion artifacts (i.e.
ghosting, dot crawl), and offers 5.1 independent channels of CD-quality stereo surround
sound, (also referred to as AC-3).
Progressive Scan
In Progressive Scanning all the horizontal scan lines are scanned on to the screen
at one time. The Digital TV and HDTV Standards accept both Interlaced Scan and
Progressive Scan broadcast and display methods.
Resolution
Resolution: A measurement of the finest (smallest) detail that is visible in a video image.
TV Resolutions may be expressed as number of pixels in an image; or more commonly,
As Total Number of (horizontally scanned) Lines used to create the image.
Standard Digital TV Resolutions:
SDTV: 576i - The picture is 704x576 pixels, 576p - The picture is 720x576 pixels.
HDTV: 720p - The picture is 1280x720 pixels, 1080i - The picture is 1920x1080 pixels.
1080p - The picture is 1920 x 1080 pixles.
EN-23
FRANÇAISE
Aspect Ratio
The ratio between the width and height of the TV picture on the screen. In a normal
TV set the aspect ratio is 4 to 3 (4:3). The new aspect ratio in HDTV is 16:9 which
resembles the aspect ratio in a movie theatre (Widescreen). New TV systems support
both 4:3 and 16:9 aspect ratio and can automatically switch between them.
ENGLISH
Glossary
ESPAÑOL
8.
ENGLISH
9.
Troubleshooting
Symptoms
Possible cause
The TV is not connected
to the power.
FRANÇAISE
No power or indicator light.
ESPAÑOL
What should you do
1. Press POWER at the side of the TV, or press . on the remote control.
2. Ensure the AC power cord is connected tightly to the TV power connector and to the
power socket outlet.
3. Remove the AC power cord from the power socket outlet, wait 60 seconds and reconnect
the AC power cord.
4. Connect the TV to a different power socket outlet.
1. Ensure that your HDMI cable is certified.
2. Press SOURCE button on the remote control to switch to another source and then
switch back to the HDMI source.
Error message on the screen
with HDMI connection.
HDCP authentication fail.
3. Reset the accessory device and the TV.
Turn on the TV
Select the HDMI channel
Turn on the accessory device
4. While the TV and the accessory device are powered on, unplug either end of the HDMI
cable and then reinsert the cable.
No sound is detected from
the PC.
Audio cable is not
connected.
1. Connect an audio cable to the PC AUDIO IN port on the TV.
2. Press SOURCE button on the remote control, and select the PC source.
1. Ensure the indicator light on the TV blinks when the remote control buttons are pressed.
TV does not respond to the
remote control.
Batteries are installed
incorrectly, or low battery
power.
2. Ensure that you are using the remote control supplied with the TV.
3. Ensure that the batteries of the remote control are inserted according to the illustration
on the remote control and that the batteries do not need to be replaced.
4. Remove the AC power cord from the power socket outlet, wait 60 seconds and reconnect
the AC power cord.
The picture is distorted. It is
stretched out, has short, fat,
black bars on the side or top.
Broadcast video format.
The picture is mostly red and
green, or the picture is missing
red when the TV is connected
to an accessory device via
1. Press the FORMAT button on the remote control to select the best picture format.
2. For some accessory devices, the picture format has to be set in the accessory device.
1. Ensure all the connections are made according to the color code.
Insecure/incorrect
connection.
2. Push the component cables all the way into the YPbPr sockets on the TV.
component cables.
Volume level is set to
zero.
Sound is muted.
Headphones are
No sound on the TV
loudspeaker.
connected.
Audio cable is not
connected.
Bad picture quality with a
coaxial connection.
2. Press MUTE button on the remote control.
3. Ensure the headphones are not plugged into the TV.
4. For AV connection, ensure that the Audio L/R cable is connected as described in Connect
devices section. If you are using a component cable, ensure that you have not crossed the red
audio cable with the red video cable.
Accessory device audio
5. For HDMI connections, some accessory devices have an HDMI audio output setting that
output setting is incorrect.
must be turned on for HDMI to HDMI connections.
Standard definition
channels are not as clear
1. Connect the devices via component or HDMI cables.
as high definition channels.
Incorrect channel
No picture or sound.
1. Increase the volume.
Incomplete channel
installation.
1. Ensure you have selected the correct channel.
1. If the TV receives channels via an AV connection, set the TV to the correct source input.
2. If the TV is connected directly to the wall via a coaxial connection, perform the Auto
store again.
EN-24
Technical specifications
Model no.
ENGLISH
9.1
19PFL3403
16:9
Resolution
1440 x 900 @ 60Hz
Brightness
300 cd/m2 (typ.)
Response Time (on/off)
5 ms (typ.)
Viewing Angles (V/H)
160 by 160 (typ.)
Sound Output (RMS Watts)
3W x 2
Sound Mode
Mono, Stereo, Incredible surround
Video Formats
Super zoom, 4:3, Movie expand 14:9, Movie expand 16:9, 16:9 subtitle,
Widescreen
Smart Mode
Personal, Vivid, Standard, Movie, Game, Power saver
FRANÇAISE
PICTURE/DISPLAY
Aspect Ratio
ESPAÑOL
SOUND ENHANCEMENT
EASE OF USE
CONNECTIONS
Rear Connectors
CVI: Component video input + Audio L/R (support 480i/p, 576i/p, 720p,
1080i/p)
HDMI (Ver 1.3a HDMI, support video: 480i/p, 576i/p, 720p, 1080i/p)
PC IN: VGA, PC Audio IN
Headphone x 1
Side Connectors
Composite video input + Audio L/R
S-Video
WEIGHT & DIMENSIONS
Gross Weight
6.0 kg
Net Weight
4.8 kg
Box dimension (L x W x H)
562 x 486 x 186mm
Product dimension
(H x W x D)
392 x 468 x 166mm
POWER
Power Consumption
50 W
Standby Power Consumption
< 0.3 W
Mains Power
100-240V, 60-50Hz
EN-25
ENGLISH
10.
Index
Rear connectors 19
A
Recycling 5
AC power cord 9
Remote control 6
FRANÇAISE
Antenna 8
ESPAÑOL
R
Auto lock 17
S
Screen resolutions 18
B
Sharpness 14
Batteries 8
Side connectors 19
Brightness 14
Skin tone 17
Sleeptimer 16
C
Smart mode 14
Cable 8
Switch on the TV 9
Care
Environment 5
T
Screen 5
Technical specifications 25
Channel
Install 13
Clock 16
Color temp 14
Contrast 14
Tint 14
Troubleshooting 24
V
Volume 10
W
L
Lock program 18
N
NR 17
O
Overview
Connection 19
Remote control 12
TV 6
P
PC mode 18
Picture format 15
PIN code 17
Position the TV 7
EN-26
Wall mount 7
Watch TV 10
© 2008 Koninklijke Philips Electronics N.V.
All rights reserved.
P41T9043813 1A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising