Philips | 42PF9830/69 | Owner's Manual | Philips Cineos widescreen flat TV 42PF9830/69 User manual

Philips Cineos widescreen flat TV 42PF9830/69 User manual
Contents
Help?
If this instruction manual does not give
an answer or if ‘Tips’ does not solve your
TV problem, you can call your Local
Philips Customer or Service Centre. See
the supplied World-wide guarantee
booklet.
Please, have the Model and Product
number which you can find at the back
of your television set or on the packaging,
ready, before calling the Philips helpline.
Model: 42PF9830/69-79
Product No: ...........................................
Care of the screen
See p. 3.
R End of life directives
Philips is paying a lot of attention to
producing environmentally-friendly in green
focal areas.Your new TV contains materials
which can be recycled and reused. At the
end of its life specialised companies can
dismantle the discarded TV to concentrate
the reusable materials and to minimise the
amount of materials to be disposed of.
Please ensure you dispose of your old TV
according to local regulations.
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
To operate the motorised swivel . . . . . . . . . . . . . . . . . . . . . . . . . 3
Keys at the top of the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Use of the remote control RC4310 . . . . . . . . . . . . . . . . . . . . . . . 4
Browse screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
To use the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
How to navigate through the Settings menus . . . . . . . . . . . . . . . . . . . 7
Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installation
Select the menu language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Store TV channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Software upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Setup menu
Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
TV menu
Picture menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Sound menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Features menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Ambilight menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Multimedia Browser
Viewing content from a Memory card / USB device . . . . . . . . . . . . . 19
Multimedia Browser menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Teletext menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Equipment to connect to the side connections . . . . . . . . . . . . . 22
Connect Peripheral Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Recorder (vcr-dvd+rw) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Recorder and other A/V equipment . . . . . . . . . . . . . . . . . . . . . . . . . 25
DVD Player or other accessory digital source equipment . . . . . . . . . 26
MultiChannel Surround receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Devices to connect to a HDMI connector . . . . . . . . . . . . . . . . . . . . 28
Devices to connect to a DVI connector . . . . . . . . . . . . . . . . . . . . . . 29
Record with your recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
To select connected peripherals . . . . . . . . . . . . . . . . . . . . . . . . . 30
Audio- and video equipment keys . . . . . . . . . . . . . . . . . . . . . . . 31
Setting the remote control to work peripheral equipment
Code setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
To cancel the selected mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Learnable remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Annex 1 - Philips TV software upgrade with portable memory . 37
Annex 2 - Philips TV Slideshow Format with background music. 39
Annex 3 - Philips TV - Portable Memory and USB . . . . . . . . . . 41
NXT® is a trademark of New Transducers Limited
1
Preparation
Do not insert the power plug in a wall socket or hang the TV to the wall
before all connections are made.
& Wall mounting instructions/Table stand/Motorised swivel
How to mount the supplied stand and/or wall mount bracket and the
swivel, see the supplied separate Quick Start Guide.
Caution: Installing the TV requires special skills that should only be
performed by qualified personnel.You should not attempt to do the work
yourself. Philips bears no responsibility for improper mounting or mounting
that results in accident or injury.
Using the supplied bracket to mount the TV:
- You can ask a qualified service personnel about using the bracket to
mount the display on the wall.
- Follow the instructions that come with the bracket before beginning
work.
- Make sure that the wall mount is being fixed securely enough so that it
meets safety standards.The weight of the TV (excl. packaging) is about
42 kg.
é Place or hang the TV wherever you want, but make sure that air can
circulate freely through the ventilation slots. Do not install the TV in a
confined space such as a book case or a similar unit.
To prevent any unsafe situations, no naked flame sources, such as lighted
candles, should be placed in the vicinity. Avoid heat, direct sunlight and
exposure to rain or water.
The equipment shall not be exposed to dripping or splashing.
“ Insert the aerial plug firmly into the aerial socket x at the bottom of the
TV. For best picture quality use the suppressor-aerial cable supplied.
‘ Before installing your TV, connect all your peripheral equipment. See p. 23.
( Insert the mains cord supplied into the mains at the bottom of the TV and
in the wall socket having a mains voltage of 198-264V.
To prevent damaging the power (AC) cord which could cause a fire or
electric shock, do not place the TV on the cord.
§ Remote control: Insert the 2 batteries supplied (Type R6-1,5V).
The batteries supplied do not contain the heavy metals mercury and cadmium.
Please check on how to dispose of exhausted batteries according to local
regulations.
è Switch the TV on : Press the power switch B at the top of the TV.
An indicator on the front of the TV lights up and the screen comes on. If
the TV is in standby mode, press the -P+ keys or the B key on the remote
control.
2
To operate the motorised swivel
The motorised swivel can turn + and - 30 degrees and can be operated
with the remote control of your TV. Manual rotation remains possible too.
B
Preparation
& Insert the DC cable of the swivel transformer into the DC input of the
DVD/R SAT TV VCR AUX
v
SELECT
swivel.
é Insert the power cord to the swivel transformer.
k
“ Insert the mains plug of the swivel transformer in the wall socket.
T
DEMO
Operation
First press the SWIVEL MOT key at the side of your remote control and
keep it pressed.
Then simultaneously:
- press the cursor left/right to rotate the swivel in the direction of the
command;
- press the the cursor down to bring the swivel in a central position;
- press the cursor up to return the swivel to the last selected position.
BROWSE
b
=
MOT
®
OK
®
®
®
Note: After a power drop or a power cord plug out, adjust the swivel position with
the cursor left/right.
b
MENU
+
+
V
¬
P
_-
ABC
DEF
1
2
3
-
Automatic positioning to central position
Press the B key for at least 5 seconds to switch off your TV and to turn
the swivel to its central position.
-
Keys at the top of the TV
Should your remote be lost or broken you can still change some of the basic
settings with the keys on the top of your TV.
Press the power switch B to switch the TV on.
Press:
• the V - or + keys to adjust the volume;
• the P/CH - or + keys to select the TV channels or sources.
The MENU key can be used to summon the Settings menu without the remote
control.
V
MENU
P/CH
B
Use:
• the V - and + keys and the P/CH œ and P/CH o keys to select menu
items;
• the MENU key to confirm your selection.
Note:
When activated via the MENU key on top of the TV, only Exit lets you dismiss the
menu.
Navigate to Exit, press the cursor right and then press the MENU key.
Care of the screen
Do not touch, push or rub or strike the screen with anything hard as this may scratch, mar or damage the screen permanently.
And please do not rub with dust clothes with chemical treatment.
Do not touch the surface with bare hands or greasy cloth (some cosmetics are detrimental to the screen).
Unplug the TV before cleaning the screen.
When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks.
Do not use acetone, toluene and alcohol because they cause chemical damage.
Do not use liquid cleaners or aerosol cleaners.
Wipe off saliva or water drops as soon as possible.Their long time contact with the screen causes deformations and colour fading.
3
Use of the remote control RC4310
Note: For most keys pressing a key once will activate the function. Pressing a second time will de-activate it.
When a key enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list. The list will be removed
automatically after 6 seconds or press OK to remove immediately.
DVD/R SAT TV VCR AUX
Press the SELECT key repeatedly to
select one of the system modes in
which the remote control can be used.
If no action is being undertaken within
60 seconds, the remote control
returns to TV mode.
After an action in the selected system
mode the remote control will remain
in this mode for 60 seconds and will
then return to TV mode.
B Standby
Press to switch the TV on or off from or to
standby mode.
When switched to standby, a red indicator
on the TV lights up.
Note: the TV is never powered off completely
unless it is physically unplugged.
B
DVD/R SAT TV VCR AUX
v
k
SELECT
T
DEMO
DEMO Demo on/off
v Select connected equipment
Press and hold this key until the
source indication appears, then press
repeatedly to select AV1, AV2, AV3,
b
=
MOT
OK
®
®
k Teletext index page See p. 21.
b Teletext On/Off See p. 21.
®
= BROWSE On/Off
Press to display the Browse menu On or
Off. See p. 6.
OK • to activate a setting
• to display the channel list
• starts playing content in the Multimedia
Browser application, p. 20.
(MOT) SWIVEL key
To control the motorised swivel in
combination with the cursor keys.
See p. 3.
MENU Settings menu on/off
See p. 11.
V Volume
MENU
b
+
+
¬
V
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
.@
i
ON/OFF
0
0
Ambilight
MODE
Press + or - to adjust the volume.
¬ Interrupt the sound or restore it.
Alphanumeric keys
To select a TV channel. See p. 6.
i Display information
Press to display (when available)
information about the selected TV
channel and programme.
®Ò‡†ºπ
• Audio and Video equipment keys.
See p. 31.
• Multimedia browser functional keys.
See p. 20.
4
®
q
Ò
‡
†
- FAVORITES -
º
✓
π
VIEW
Cursor keys
Press the cursor keys up/down, left/right
to navigate through the menus.
P
_-
Colour keys
When functions are attached to the
colour keys, the colour keys show on
screen.
®
DVI, HDMI, Side or TV, according to
where you connected your peripheral
equipment.
See p. 7
BROWSE
+P- Channel selection
To browse through the TV channels
and sources stored in the preferred
channels list.
0 Previous programme
Press to alternate between the currently
viewed and the previously viewed TV
channel.
AMBILIGHT
• ON/OFF
Press to switch Ambilight On or Off.
For the Ambilight settings, see TV
menus, Ambilight, p. 18.
• MODE
Press this key repeatedly to toggle
through the Ambilight modes.
FAVORITES
• VIEW To display a list of all channels
marked as favourite.
• ✓ To add or remove a channel in the
favourite list of TV channels.
b Dual screen/PIP
Press the b key to switch on or off Dual screen or PIP, according to the format
DVD/R SAT TV VCR AUX
selection made in the PIP format list in the Setup, Picture/sound preferences
menu, p. 11.
PIP allows you to call up a subscreen within the main screen enabling you to
watch two TV channels or a TV channel and pictures from a peripheral at the
same time.
Dual screen allows you to divide the main screen into two subscreens enabling
two TV channels or a TV channel and an external source or a combination of one
of them with Teletext (see p. 21) to be watched simultaneously.
Note: Not all combinations might be possible. In such a case a message appears on the
screen.
v
& Press the cursor left/right to highlight the PIP window or the left/right screen
B
k
SELECT
in Dual screen
T
DEMO
é Press the -P+ key or the v key or the digit keys in order to change TV
channels, external sources or teletext pages in the highlighted screen.
BROWSE
=
b
MOT
®
to the picture which was highlighted in the Dual screen or PIP mode.
OK
®
®
®
MENU
b
+
+
¬
V
Note: on screen information, which appears when changing channels, always
refers to the highlighted screen.
“ Press the b key again to return to a full main screen picture.The TV tunes
P
-
-
_-
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
Notes:
- Audio only plays from the main, when PIP has been selected, or from the left
screen, when Dual screen has been selected.
- When in Dual screen, two display formats are supported: full screen or
squeezed.
Multimedia browser content will always be displayed full screen.
- When PIP or Dual screen mode is activated, and a TV channel or source is
locked, the picture is grayed out.
Define the position of the PIP screen
& Press the cursor right to highlight the PIP screen.
é Press the red colour key on the remote control to select Position.
Note: If no action has been undertaken, the function bar at the bottom of the
screen will disappear after a few seconds. Press any colour key to make it re-appear.
“ Use the cursor keys to define the position of the PIP screen.
.@
i
0
0
ON/OFF
Ambilight
MODE
q Picture format
®
q
Ò
‡
†
- FAVORITES -
º
✓
π
VIEW
Press this key repeatedly to select another picture format: Auto format, Super
zoom, 4:3, Movie Expand 14:9, Movie Expand 16:9, Subtitle zoom or Wide screen.
Auto format
Super zoom
4:3
Movie expand 16:9
Subtitle zoom
Wide screen
Movie expand 14:9
Auto format makes the picture fill the screen as much as possible.
In case of subtitles in the bottom black bar, Auto format makes the subtitles
visible. In case of a broadcaster logo in the corner of the top black bar, the logo
disappears from the screen.
Super zoom removes the black bars on the sides of 4:3 programmes with minimal
distortion.
When in Movie Expand 14:9, Movie Expand 16:9, Super zoom or Subtitle zoom
picture format, you can make subtitles visible with the cursor up/down.
Note: With HD sources not all screen formats will be available.
5
Alphanumeric keys on the remote control
The alphanumeric keys on the remote control can be used to enter digits
and text.
Multi-tap entry can be used to enter alphanumeric information when
necessary.The characters displayed are dependent on the language selected
in the Installation menu. See p. 8.
Text is entered similar to the method used for entering text messages on a
cellular phone.
When a letter or number has been entered, the cursor automatically
advances to the next character position after the specified time out or by
pressing the cursor right.
B
DVD/R SAT TV VCR AUX
v
k
SELECT
T
DEMO
BROWSE
=
b
MOT
®
OK
®
®
RC key
1
2
3
4
5
6
7
8
9
0
®
b
MENU
+
+
¬
V
P
-
-
Ò
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
0
0
ON/OFF
Ambilight
MODE
<space> Ò - 1 <space> Ò
a b c A B C 2 a b
d e f D E F 3 d e
g h i G H I 4 g h
j k l J K L 5 j k
m n o M N O 6 m n
p q r s P Q R S 7
t u v T U V 8 t u
w x y z WX Y Z 9
. @ 0 . @ 0 (etc.)
-1
c
f
i
l
o
p
v
w
(etc.)
(etc.)
(etc.)
(etc.)
(etc.)
(etc.)
q r s
(etc.)
x y z
(etc.)
(etc.)
Also the cursor up/down can be used to enter alphanumeric information.
When finished, press the OK key to confirm the entry.
Move to the left panel.
.@
i
Default Multi-tap Alphanumeric entry order
Default RC_CURSOR_UP/RC_CURSOR_DOWN Alphanumeric
Entry Order
RC_CURSOR_UP
a b c d . ..A B C D ... 1 2 3 ... 0 <space> _ - . @
RC_CURSOR_DOWN
@ . - _ <space> 0 9 8 7 ... Z Y X ... z y x ... c b a
Key
®
q
Ò
‡
†
- FAVORITES -
º
✓
π
VIEW
Browse screen
Television
TV channels
Multimedia
USBDevice
The Browse screen (and the underlying Multimedia content browser) is
intended to contain all content, services, applications you are interested to
consume.
& Press the = key to activate.
Memory Card
é Press the cursor up/down to move the highlight up and down in the list of
menu items.
“ Press the cursor right to go deeper into the structure.
• Television:
TV channels leading to the list of TV channels.
• Multimedia:
Contains the locally connected devices on which content (pictures, movies
and audio files) is stored. See Multimedia browser, p. 20.
6
To use the menus
Introduction
A lot of guiding instructions, help texts and messages will be displayed on your TV when using the menus or when trying to execute
an action.
Please, follow the instructions and read the help text which are being displayed on the specific item highlighted.
The colour keys refer to different actions which may be executed depending on the activated peripheral equipment. Press the
corresponding colour key on the remote control to perform the required action.
How to navigate through the Settings menus
Settings
TV
TV
Picture
Setup
Sound
Installation
Ambilight
Demo
Features
Exit
Info
Settings
TV
Picture
Picture
Personalisation tool
Sound
Smart picture
Ambilight
Contrast
Features
Brightness
Colour
Sharpness
The Settings menu allows you to access and change settings and
preferences.
• Press the MENU key on the remote control to summon the Settings menu.
- On the left panel the highlight can be set on a menu item with the cursor
up/down.
The right panel shows the content of the highlighted menu item in the left
panel.
Note: Sometimes not all the menu items are visible on the screen. Use the cursor
down to reveal all items.
- Use the cursor right to enter the right panel.
The content of the right panel is moved to the left panel and the right
panel shows the content of the newly highlighted item in the left panel.
Note: In some cases it is important that the picture can be watched while
adjusting the settings. This means that when the highlight is on the right side
panel, the other menu items hide away. When cursor left is pressed again, the
hidden menu items re-appear and the highlight moves to the left panel.
• Press the cursor left to go one menu level up again.
- Press the OK key on the highlighted item to activate and to dismiss the
menu.
- Press the MENU key again to exit the Settings menu.
Note: The menu is also dismissed by pressing one of the colour keys (if present)
referring to certain actions which may be executed.
Tint
Info
Demo
Settings
Demo
TV
Ambilight
The Demo menu allows the user to get an idea of the features that are part of
the television.
Setup
Personalisation tool
& Select Demo in the Settings menu and press the cursor right.
Installation
Pixel Plus 2
é Highlight a desired demo with cursor up/down.
Demo
Active Control
“ Press OK to start playing the highlighted demo.
Exit
Note: The selected demo is played once.
Press the red colour key again to exit the demo and to return to TV mode.
Note: The demos require no user interaction except for starting the demo.
Info
7
Installation
Settings
Installation
TV
Language
Select the menu language
Setup
Automatic installation
& Press the MENU key on the remote control.
Installation
Manual installation
é Use the cursor down to select Installation in the Settings menu.
Demo
Reshuffle/rename channels
“ Use the cursor right to enter the Installation menu.
Exit
Preferred channels
‘ Select Language and enter the list of available languages with the cursor
Software upgrade
right.
( Select your language with cursor up/down and press the OK key to confirm
your selection.
§ Proceed with the Installation menu.
Info
Store TV channels
After language is set correctly, you can now search for and store the TV
channels in two different ways: using Automatic Installation or Manual
Installation (tuning-in channel by channel, see further).
Automatic installation
& Select Automatic installation in the Installation menu.
Note: All channels must be unlocked in order to autoprogram. If requested, enter
your code to unlock all channels. (See TV, Features menu, Childlock, p. 17.)
é Press the cursor right to enter the Automatic installation.
The autoprogramming option label Start now appears.
“ Press the OK key.
‘ Press the green key Start to start autoprogramming.
The menu screen disappears and the progress of autoprogramming is
displayed.
Settings
Installation
Manual installation
Installation
Manual installation
& Select Manual installation in the Installation menu.
Language
Channel
Automatic installation
Search
Manual installation
Fine tune
Reshuffle/rename channels
Store
Preferred channels
Software upgrade
é Use the cursor right to enter the Manual installation menu.
“ Select your country or part of the world where you are now located.
‘ Press the cursor down to select Channel.
Enter or select the number where you would like to store the TV channel.
( Press the cursor down to select Search.
The frequency increases until the TV channel is found.
Note: If you know the frequency, enter the 3 or 2 digits of the frequency or the
channel number directly with the digit keys 0 to 9 (e.g. 048).
§ Press the cursor down to select Fine tune.
Info
Searching for and storing TV channels is done channel by
channel.
You must go through every step of the Manual
Installation menu.
8
Press the cursor right and then adjust the frequency with the cursor
up/down in case of poor reception of the channel found.
è Press the cursor left and then press the cursor down to select Store.
Press the cursor right and store the channel found with the OK key.
Repeat steps ‘ to è to search for another TV channel.
Reshuffle/Rename channels
You can change the order of the stored TV channels.
It is also possible to change the name stored in the memory or to assign a
name to a TV channel or external for which a name has not yet been
entered. A name with up to 5 letters or numbers can be given to the
programme number 0 to 99 and to the externals.
Settings
Installation
Reshuffle channels
Language
Channel name
Automatic installation
...............
Manual installation
...............
Reshuffle/rename channels
Channel name
& Select Reshuffle/Rename channels in the Installation menu.
Preferred channels
é Press the cursor right. A channel list appears.
Software upgrade
“ Select the TV channel you want to reshuffle or to rename with the cursor
up/down.
Reshuffle
& Press the green colour key on your remote control.The highlight is on the
selected TV channel you want to exchange.
Info
é Select the new number you want to exchange the channel with the cursor
up/down.
“ Press the green colour key on your remote control to swap the reshuffled
channel with the currently highlighted channel.
Note: Press the red colour key to cancel the reshuffling action.
‘ Repeat to reshuffle other TV channels.
Rename
& Press the red colour key on your remote control.The highlight is on the
é
“
‘
(
§
Preferred channels
Settings
Installation
Preferred channels
Language
Channel name
Automatic installation
...............
Manual installation
...............
&
Reshuffle/rename channels
Channel name
é
Preferred channels
selected TV channel you want to rename.
Select the characters with the cursor up/down or with the alphanumeric
keys on the remote control.
Select the following position with the cursor right.
Enter a new character.
Press the green colour key or the OK key when finished.
Notes:
- Press the yellow colour key to delete all characters. The cursor will be positioned
at the beginning.
- Press the blue colour key to delete the character the cursor is positioned. Enter a
new character with the cursor up/down.
- Space, numbers and other special characters are located between Z and A.
Select another channel number and repeat steps é to ( to do another
renaming.
“
Software upgrade
‘
(
After leaving the Installation, you can browse through the TV channels with
the -P+ key. Only those channels which are in the preferred list, will be
displayed. In this menu you can select which channels will be part of the
preferred list.
Select Preferred channels in the Installation menu.
Press the cursor right to display the list of stored TV channels.
Press the cursor up/down to select a TV channel you want to skip from the
preferred list.
Press the OK key to confirm.
Repeat for every channel you want to make non-preferred.
Info
9
Software upgrade
Settings
Installation
Software upgrade
Language
Current software info
Automatic installation
Local upgrades/applications
Manual installation
Reshuffle/rename channels
Preferred channels
Software upgrade
Info
10
This menu allows you to upgrade your TV software using a USB device or
Memory Card device.
USB device/Memory Card upgrade
It is possible to initiate an upgrade procedure from a USB device or
Memory card device before starting up the TV.The memory device must be
filled with the appropriate upgrade image (and structure) which can be
found on the www.philips.com/support website.
How to upload a new software version on your memory device,
see Annex 1, p. 37.
Setup menu
Settings
Setup
TV
Preferences
Setup
Source
Installation
Demo
This menu is used to control the settings of special TV functions, features and
peripheral equipment.
The Preferences menu allows you to change settings that will typically be
accessed only occasionally.
The Source menu allows you to select a source.
Exit
Preferences
& Press the MENU key.
é Select Setup with the cursor down and press the cursor right to select the
Preferences menu.
Info
“ Press the cursor right again to select Picture/sound preferences.
‘ Press the cursor right once more to enter the Picture/sound preferences
menu.
Settings
Setup
Preferences
Preferences
Picture/sound preferences
Source
Features preferences
Menu preferences
Factory settings
Picture/sound preferences
PIP format
This menu allows you to select the preferred format (PIP or Dual screen)
which can then be displayed toggling the b key on the remote control
On or Off.
& Select PIP format.
é Press the cursor right.
“ Select PIP or Dual screen with the cursor up/down.
See Use of the remote control, p. 5.
Info
Settings/Setup
Preferences
Picture/sound preferences
Picture/sound preferences
PIP format
Features preferences
Auto surround
Auto surround
Sometimes the broadcaster transmits special signals for Surround sound
encoded programmes.The TV automatically switches to the best surround
sound mode when Auto surround is switched On.
Menu preferences
Factory settings
Info
Settings/Setup
Preferences
Features preferences
Picture/sound preferences
Teletext 2.5
Features preferences
Teletext 2.5
Some broadcasters offer the opportunity to see more colours, other
background colours and nicer pictures in the teletext pages.
& Select Teletext 2.5 in the Features preferences menu.
é Press the cursor right to select Teletext 2.5 On or Off.
“ Select Teletext 2.5 On to take advantage of this feature.
Select Teletext 2.5 Off if you like the more neutral teletext layout.
The selection made is valid for all channels which broadcast Teletext 2.5.
Note: It may take a few seconds before teletext broadcast switches over to
Teletext 2.5.
Features preferences
Menu preferences
Factory settings
Info
11
Menu preferences
OSD
& Select OSD.
Settings/Setup
Preferences
Menu preferences
Picture/sound preferences
OSD
Features preferences
Programme title
Menu preferences
Set/Change code
Factory settings
é Press the cursor right to select Normal or Minimum.
Normal to activate the continuous display of the channel number (for 10
minutes) and extended display of TV channel and programme information
on screen. E.g. information on the main or auxiliary programme, input signal
quality of connected peripheral equipment, the display format and sound
mode.
Minimum to activate the display of reduced channel information.
See Use of the remote control, p. 4, i Display information.
Programme title
& Select Programme title.
Info
é Press the cursor right to select Programme title Yes or No.
When selected Yes, after the selection of a TV programme or after pressing
the i key on the remote control, a TV channel may transmit the name of
the TV channel or the programme title.
When selected No, the programme title will only appear after pressing the
i key and not after the selection of a TV channel.
Set/Change code
& Select Set or Change code in the Features preferences menu with the
cursor down.
é If no PIN-code exists yet, the menu item is set to Set code. Follow the
instructions on screen.
If a PIN-code has previously been entered, the menu item is set to Change
code. Follow the instructions on screen.
All number combinations from 0000 tot 9999 are valid numbers.
“ The Features preferences menu reappears with a message confirming
that the PIN has been created.
Important:You have forgotten your code !
& Select Change code in the Features preferences menu and press OK.
é Press the cursor right and enter the overriding code 8-8-8-8.
“ Press the cursor again and enter a new personal 4-digit code.The previous
code is erased and the new code is stored.
Factory settings
This function allows you to reset most of the picture and sound settings to
their predefined factory states.
& Select Factory settings with the cursor down.
é Press the cursor right.
“ Press the OK key to erase settings and reset them to their default values.
12
Source
Settings
Setup
Source
Preferences
AV1
Source
AV2
AV3
DVI
HDMI
Side
Digital Audio In 1
Digital Audio In 2
Info
This menu allows you to select the peripheral equipment you have connected
to the external inputs/outputs.
& Select Source in the Setup menu.
é Press the cursor right.
“ Select the input to which the peripheral equipment is connected.
‘ Press the cursor right again to enter the list of types of peripherals
connected to the selected input.
( Select the peripheral equipment with the cursor up/down.
When you select AV1, AV2, AV3, DVI, HDMI or Side, a list appears
allowing you to identify which type of peripheral equipment is attached to
this input.The TV detects the presence of the connected peripheral
equipment and the signal is routed appropriately..
Digital Audio
Select Digital Audio In 1 or 2 when the TV expects digital audio for a
connected peripheral equipment to come from a Digital audio input.
Make your selection of the source to which the peripheral equipment with
digital audio input has been connected.
In addition to accepting audio input via Digital Audio In, the TV can output
encoded Dolby Digital audio via the DIGITAL AUDIO OUT connector to
an external amplifier or receiver. If your amplifier or receiver has a
matching connector for Digital Audio In, you can connect it with a single
cable to the TV’s DIGITAL AUDIO OUT.
See Connect Peripheral Equipment, Digital MultiChannel Surround Receiver,
p. 27.
13
TV menu
Settings
TV
TV
Picture
Setup
Sound
Installation
Ambilight
Demo
Features
Press the MENU key on the remote control to summon the Settings menu.
The TV menu gives you an overview of the menus you can select.
Note: Depending on the input signal, one or more menu items may not be selectable.
Picture menu
Note: Some menu items are not available in case of HD sources.
Exit
& Press the cursor right to select Picture.
é Press the cursor right again to enter the Picture menu.
“ Select the menu items with cursor up/down.
‘ Press the cursor right again;
Info
( Adjust the settings with the cursor keys. Select a submenu item with the
cursor up/down.
Colour
Personalisation tool
The Personalisation tool helps you to come to a personal picture setting.
This is done by presenting a series of several adjustment screens each
having split screens. Each time you have to select the most preferred side of
the screen. Finally a full screen appears with all the settings selected.
Note: The Personalisation tool will not alter the presence of behaviour of other
picture setting options, except that it overwrites the Personal settings of Smart
picture.
Sharpness
& Select Personalisation tool and press the cursor right.
Tint
é A welcome screen appears followed by several adjustment screens.
.............
“ With the colour keys, each time select your preferred setting on the left or
Settings
TV
Picture
Picture
Personalisation tool
Sound
Smart picture
Ambilight
Contrast
Features
Brightness
Info
right screen side.
‘ Finally press the green colour key to store your selected settings.
Smart picture
Select Smart picture to display a list of predefined picture settings, each
corresponding with specific factory settings.
Personal refers to the personal preference settings of picture in the
picture menu.
Note: This Philips TV has been set at the factory to look best in bright shop
environments which typically use fluorescent lighting. As your home will likely not be
as well lit as a shop, we recommend that you cycle through the various smart
picture modes to find the one that best suits your own viewing conditions. Most
consumers will find that Natural is the correct choice.
Contrast
This will adjust the intensity of bright parts in the picture but keep the dark
parts unchanged.
Brightness
This will adjust the light output of the complete picture, which will mainly
affect the darker areas of the picture.
Colour
This will adjust the saturation level of the colours to suit your personal
preference.
Sharpness
This will adjust the sharpness of fine details in the picture.
Tint
This will increase or decrease Warm (red) and Cool (blue) colours to suit
personal preferences.
Select Cool to give the white colours a blue, Normal to give the white
colours a neutral, Warm to give the white colours a red tint.
14
Digital options
Pixel Plus 2 is the most ideal setting, as it fully processes the image to
Settings
TV
Picture
Picture
...............
Sound
Digital options
Ambilight
Dynamic contrast
Features
DNR
Colour enhancement
Hue
Picture format
Active Control
Info
make every single pixel the best it can be, improving contrast, sharpness,
picture depth, and colour reproduction and brilliance from every source,
including High Definition.
For the most optimum motion reproduction of all source materials, select
the Movie Plus setting.
Standard mode is recommended only for very noisy or poorly mastered
sources or for those who find the smoothness of Pixel Plus 2 unsettling.
Dynamic contrast
Automatically makes the contrast in the darker and the brighter picture
areas more noticeable as the image on the screen changes.
Normally select Medium. It may be preferred to select Minimum,
Maximum or Off.
& Press the cursor right to enter the list.
é Select one of the settings with cursor up/down.
“ Press the cursor left to return to the picture menu.
DNR (Digital Noise Reduction)
Automatically filters out and reduces the image noise and improves picture
quality when receiving weak video signals.
& Press the cursor right to enter the list.
é Select Off, Minimum, Medium or Maximum according to the image
noise.
“ Press the cursor left to return to the picture menu.
Colour enhancement
When activated, this feature automatically controls green enhancement and
blue stretch. It makes the colours more vivid.
& Press the cursor right.
é Select On or Off in order to activate/de-activate Colour enhancement with
the cursor right.
Hue
This compensates for the colour variations in NTSC encoded
transmissions.
Picture format
This menu item performs the same as the q key on the remote control.
See Use of the remote control, p. 5.
Active Control
The TV continuously measures and corrects all incoming signals in order to
provide the best picture possible.
It also uses a sensor which monitors the ambient light conditions in the
room and adjusts key picture settings for best viewing.
When Active Control is set to Maximum, the brightness, the contrast and
the colour of the Ambilight shall be influenced by the light sensor.
When Active Control is set to Medium, only the colour of the Ambilight
shall be influenced.
& Select Active Control.
é Press the cursor right to enter the list of Active Control values.
“ Press the cursor up/down to select the Active Control values Off,
Minimum, Medium or Maximum.
The picture settings are being optimised continuously.Those menu items
can not be selected.
‘ Press the OK key or wait for the time out to dismiss the Active Control
display.
15
Sound menu
Settings
& Select Sound in the TV Settings menu.
TV
Sound
Picture
Smart sound
Sound
Volume
Ambilight
Balance
‘ Press the cursor right.
Features
Headphone volume
( Adjust the settings with cursor keys.
Surround mode
é Press the cursor right to enter the sound menu.
“ Select the menu items with cursor up/down.
Remember, control settings are at normal mid-range levels when the bar
scale is entered.
Dual I-II
Mono/Stereo
AVL
Delta volume
Info
Smart sound
Select Smart sound to display a list of predefined sound settings, each
corresponding with specific factory settings of Treble and Bass.
Press the cursor right to enter the list.
Press the cursor up/down to select a predefined sound setting.
Personal refers to the personal preference settings of sound in the sound
menu.
Note: The moment you are in a predefined Smart sound setting and you modify a
setting in the Sound menu, all values of the menu will overwrite the previously
made personal setting.
Volume
This will adjust the sound output level.
Balance
This will adjust the output of the right and left speakers to obtain the best
stereo reproduction for your listening position.
Headphone volume
This controls the level of sound through the headphones.
Surround mode
This selects the modes for more spatial or surround sound reproduction
dependent on the broadcast signals or signals from external inputs
received.
Dual I/II
This will select, per channel, Language I or Language II, when dual sound
transmission is available.
Mono/Stereo
This selects, per TV channel, Mono or Stereo sound when analog stereo
broadcasts are available.
AVL (Automatic Volume Leveler)
This automatically reduces the volume differences between channels and
programmes, providing a more constant overall level.This will also reduce
the dynamics of sound.
Delta volume
This allows you to correct for any permanent volume differences between
TV channels or external sources.
16
Features menu
Settings
& Select Features in the TV Settings menu.
TV
Features
é Press the cursor right to enter the Features menu.
Picture
Subtitle
“ Select the menu items with cursor up/down.
Sound
Sleeptimer
‘ Press the cursor right.
Ambilight
Childlock
( Adjust the settings with the cursor keys.
Features
On timer
Select subtitles
The subtitle page must be stored for each TV channel.
Switch on teletext and select the proper subtitle page from the index.
Switch off teletext.
Subtitle On will automatically display them on the selected TV channels if
subtitles are in the transmission. A symbol will indicate that the mode is on.
Select On during mute when you want to have the subtitles automatically
displayed only when the sound has been muted with the ¬ key on the
remote control.
Info
Settings
Features
Childlock
Subtitle
Lock
Sleeptimer
Custom lock
Childlock
Unlock
On timer
Sleeptimer
This sets a time period after which the TV automatically switches to
standby.
& Select Sleeptimer.
é Press the cursor right.
“ Select a value with the cursor up/down.The list will have values from 0 to
180 minutes.
When 0 is selected, the sleeptimer is switched off.
You can always switch off your TV earlier or select another time set.
Child lock
& Select Child lock in the Features menu.
é Press the cursor right to enter the Child lock menu.You’re summoned to
Info
enter your code.
Note:You have to re-enter your code each time you enter the child lock menu.
Settings
Childlock
Important:You have forgotten your code ! See p. 12.
Custom lock
Lock
Lock after
Custom lock
Channel lock
“ Select one of the menu items of the Child lock menu:
• Lock to lock all channels and externals.
• Custom lock and press the cursor right.
Select:
- Lock after to lock all programmes from a certain time onwards.
Press the cursor right and enter the time with the cursor up/down and
right. Select On with the cursor right to set the lock.
- Channel lock to lock a certain TV channel or external.
• Select Unlock to disable all locks you have set.
Unlock
Info
On timer
This automatically switches the TV to the specified programme number, at
the specified time.
Settings
Features
On timer
& Select On timer in the Features menu.
Subtitle
Timer
é Press the cursor right to enter the On timer menu.
Sleeptimer
Channel
“ Select Timer and press the cursor right.
Childlock
Day
‘ Select On.
On timer
Time
( Select Channel and then the TV channel you want your TV to switch to on
§
è
Info
!
ç
a selected time and day.
Select Day and then a day of the week or select Daily.
Select Time and enter the time with the digit keys or with the cursor
up/down.
Press the OK key to activate.
Press the MENU key to switch off the menu.
Notes:
- To check your timer settings, press the i key.
- Only one On timer can be set.
17
Settings
Ambilight menu
TV
Ambilight
Picture
Ambilight
Sound
Brightness
Ambilight
Mode
Features
Colour
Separation
Balance
Ambilight is an innovative lighting concept using light with fully adjustable
colours at the back of the TV to enhance the viewing experience. Analysis of
the picture content adapts the colours continuously, or the lights can be set to
any fixed colour and many shades of white. Ambilight creates the ideal viewing
environment for your TV resulting in improved relaxed viewing, improved
perceived picture detail, contrast and colour.
In standby mode the lights can be set/operated to any colour and create a
unique ambiance in the room.
& Select Ambilight in the TV menu.
é Press the cursor right to enter the Ambilight menu.
Info
“ Select Ambilight and press the cursor right to select Off or On.
Settings
Ambilight
Mode
Ambilight
Colour
Brightness
Ambience
Mode
Relaxed
Colour
Movie
Separation
Action
Balance
Info
Settings
Ambilight
Colour
Ambilight
Smart colour
Brightness
Palette
Mode
Saturation
Colour
Separation
Balance
Info
Smart colour modes:
• Personal: Select any colour or hue to match to
your personal taste, e.g. your interior, the
programme content (sports, movie, etc.), the
mood you are in, etc.
• Warm white:The colour is matched to that of
most normal lightbulbs. Select this setting if you
want the Ambilight to fit best with normal living
room lighting.
• Cool white:The colour is matched to that of
normal daylight (6500K). Select this setting if
you prefer more cool lighting.
Note: the 6500 K is the SMPTE recommended
setting for ambient backlighting of displays.
• Blue:The blue colour is preferred by most
consumers to create a cool, modern and /or
mystical atmosphere. Select this setting
according to your personal taste or mood.
• Off: will switch off the ambient lights and downlight all other ambilight
menu items.
• On: the ambient lights will be on. Refine the light settings in the menus
below.
‘ Select Brightness to adjust the light output of the ambient lights.
( Select Mode and press the cursor right to select Colour, Ambience,
Relaxed, Movie or Action.
• Colour: this will show constant light according to the settings in the
Ambilight colour menu. See below.
• The options Ambience, Relaxed, Movie and Action will dynamically
match brightness and colour to the screen content.
The mode selection made will effect the speed and/or saturation and/or
intensity which determines the viewing impression.
E.g. in Relaxed mode, the rate of brightness and colour change is
smoothly and soft which gives you a more immersive yet relaxed viewing.
Ambience is the rate of brightness and colour change as predefined in
the factory.
Movie will influence the perception of a movie whereas Action mode will
influence the dynamic impression.
Notes:
- The rate of change is limited, as not to cause uncomfortable sensations.
- According to the selection made, some Ambilight menu items will be downlighted
and can not be selected.
§ In case Colour has been selected in the Mode menu:
• Select Colour in the Ambilight menu and press the cursor right.
• Select Smart colour and then select Personal, Warm white, Cool
white or Blue.
• Select Palette to select the general colour of the light output.
• Select Saturation to adjust the colourfulness of the light.
Notes:
- Adjusting the Palette and/or Saturation settings will set the colour mode to
Personal.
- The selected colour mode will be the one used when turning on the ambient
lights from standby mode.
è In case Ambience, Relaxed, Movie or Action has been selected in the
Mode menu:
• Select Separation in the Ambilight menu and press the cursor right.
• Select Off for a mono behaviour which means that all lamps will behave
equally.
• Select Minimum, Medium or Maximum to define the Ambilight stereo
effect over the available lamps.
! Select Balance and use the cursor left/right to adjust and generate any
colour and level of light intensity on the left and right side of the picture to
perfectly match your room setup.
Ambilight in Standby mode
When the TV is switched off, the ambient lights will also be switched off.
When the TV is in standby mode, ambilight can be used to provide a unique
ambience for the room. Press the AMBILIGHT ON/OFF key on the
remote control (see p. 4) to switch between Ambilight Off or On.
Note: Infrared interference
To avoid bad infrared remote control reception, place your peripheral
equipments out of sight of the ambient lights of your TV.
Note: Ambilight does not function well when the room temperature is less than
59°F/15°C.
18
Multimedia Browser
Television
TV channels
Multimedia
USBDevice
Memory Card
The Multimedia browser lets you display pictures, audio or movies or play
audio files stored on a USB device or a memory card.
The Multimedia browser application is invoked from the Browse menu (press
the = key) by selecting a device and pressing the cursor right.
Notes:
- Following types of memory cards can be read:
Compact Flash I & II, Memory stick, Memory stick PRO, SD Card/Mini SD Card,
Smart Media, Micro Drive, MultiMedia Card.
- Following file formats can be reproduced:
• For pictures: JPEG
• For audio: MP3, MP3 Pro
• For video: MPEG1, MPEG2, MPEG4, DIVX and XVID files
- Only FAT/DOS-formatted memory devices are supported.
- If your digital camera is not supported, try one of the following solutions:
• Make sure your camera is switched on and verify if its configuration settings are
correct (see the manual of your camera).
• Remove the memory card from your camera and insert it in the memory card
slot. Refer to www.philips.com/support for more information.
- Philips cannot be responsible if your USB device or memory card is not supported.
Viewing content from a Memory card / USB device
Inserting a memory card / USB device
Note: Memory cards or USB devices are not supplied with this TV.
Insert a memory card in one of the cardslots at the right side of the TV.
Insert it to be clicked in.
In case of a memory stick or a digital camera, connect it to one of the USB2.0
connectors.
When a memory card or a USB device is inserted, the Multimedia menu is
displayed automatically, see further.
CF
Removing the memory card / USB device
& First switch off the Browse menu.To do so, press the = key on the
remote control.
é Remove the memory card/USB device.
Compact Flash I & II /
Micro Drive
Memory Stick
MultiMedia Card /
SD Card
Smart Media
Card
Card data protection
• Do not remove the card/USB device when the content is being read or
when browsing. Such action may damage the memory card/USB device.
• Do not touch the terminals on the back of the card.
• Always insert a card in the correct direction. Failure to do so may result in
damage to the card and the unit.
• Do not subject the card to excessive pressure or strong impacts.
• Malfunctions of the unit or card may result in data loss or damage to the
card.
• Philips shall not accept any liability for damage or loss of stored data.
Warning:
Memory cards can be swallowed by young children. Do not allow
children to handle memory cards. Please, remove the memory card
immediately after use.
19
Multimedia Browser menu
USBDevice1
Music
Picture
London2005
& Insert a USB device or memory card.
Picture
The Beatles
é Select the USB device or memory card under Multimedia with the cursor
Movies
Xmas2004.alb
up/down.
The Multimedia browser will allow the user to browse content stored on
the inserted USB device or memory card.
Press the cursor right.
“ The 2-panel browser will be shown with the left panel containing the
content types (Music, Picture,Video).
The right panel will display the content that is available of the selected
content type.
‘ Press the cursor up/down to select a content type and press the cursor
right to enter the content.
( Press the cursor up/down to select a file or a directory.
Note: Press the green colour key to display all the image files in the current
directory as thumbnails when browsing pictures. Press the green key again to
display the image files in a list.
§ In case a file is selected, press the OK key to display a picture file or to
play an audio file.
In case a directory, album or playlist is selected, press the cursor right to
enter the content or press the OK key to start a slide show or a loop
playback of the files present in the directory, album or playlist.
è Press the cursor left to keep music playing and switch back to the
Multimedia menu.
! Press one of the colour keys on the remote control to perform the
corresponding function mentioned at the bottom of the screen.
The blue colour key can be used to let the colour re-appear.
ç To stop playing content, press the ‡ key on the remote control.
arnold.jpg
eagle.jpg
USBDevice1
Picture
London2005pic001.jpg
London2005
pic001.jpg
The Beatles
pic002.jpg
Xmas2004.alb
pic003.jpg
arnold.jpg
pic004.jpg
USBDevice1/Picture/London2005
London2005
pic001.jpg
pic001.jpg
pic002.jpg
pic003.jpg
Pre
pic004.jpg
USBDevice1/Picture/London2005
London2005
pic001.jpg
Pre
pic001.jpg
1024:768
List
Press OK to play.
Notes:
• Your TV supports slide shows with
background music. See Annex 2, p. 36.
• The playback will continue to play even if
temporarily switched to browser screens. The audio
will be stopped when another song starts playing, or
when the end has been reached.
• The length of the files should not exceed 128
characters.
• More technical remarks can be found in Annex 3,
p. 38.
Following icons may appear:
folder
pictures
music
self made playlist/album
video
20
Function keys at the bottom of the screen
Details
to display a description of the selected file or
directory;
Transitions
to select if a transition during a slide show should
be applied;
Slide time
to select the duration a picture will be displayed in
a slide show;
Rotate
to rotate a picture;
Repeat one/all
to repeat the playback of a music file;
Shuffle
to shuffle music collections in a random way;
Zoom
to select one of the zoom magnifications (x1, x2,
x4) with the cursor keys up/down.
Additionally you can shift the selected zoom
window over the screen with the cursor keys;
Full/small screen
to toggle between a full or a small screen.
Note: To rotate a picture or to select one of the zoom magnifications, first stop the
slideshow with the OK key or the blue colour key.
Other function keys on the remote control
to stop displaying content;
to pause displaying content;
to play a single file, start a slide show, playback of a
folder or other collection;
†
to fast forward displaying content.
Ò
to fast rewind displaying content.
‡
º
π
Teletext
Most TV channels broadcast information via teletext.This TV has a 1200 pages
memory that will store most broadcasted pages and subpages to reduce
waiting time. After each programme change, the memory is refreshed.
Switch Teletext on and off
Press b to switch the teletext on.
B
DVD/R SAT TV VCR AUX
v
k
SELECT
Select a Teletext page
- Enter the desired page number with the digit keys or with the -P+ key.
- Select the options at the bottom of the screen with the colour keys.
T
DEMO
BROWSE
=
b
MOT
®
OK
®
Previously selected teletext page
Press the 0 key.
®
®
MENU
b
+
+
¬
V
Select the index teletext page
Press the grey colour key k to display the main index (usually p.100).
P
-
Only for T.O.P teletext broadcasts:
Press i. A T.O.P. overview of the teletext subjects available is displayed.
Select with the cursor up/down, left/right the desired subject and press the
OK key.
Not all TV channels broadcast T.O.P. teletext.
-
_-
ABC
1
2
3
GHI
JKL
MNO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
.@
i
0
0
ON/OFF
Ambilight
MODE
®
q
Ò
‡
†
- FAVORITES -
º
✓
π
VIEW
Select subpages
When a selected teletext page consists of different subpages, a list of
available subpages appears on the screen.
Press the cursor left or right to select the next or previous subpage.
Picture/Teletext
& Press the b key. Press the b key to show Teletext on the right of the
screen.
é Press the b key to return to a full teletext picture.
“ Press the b key to return to a full screen picture.
102
p 03 04 05 06 07 08 09 10 11 12 π
BBC CEEFAX 102 Mon 05 Feb 16.35.22
BBC CEEFAX
LIONS RECORD ANOTHER WIN
Index
100
BBC Info
110
Children
120
Cookery
150
Education
200
Lottery
230
Finance
240
Music
280
430
News
Headlines
Weather
Sports
Radio
Travel
Subtitling
TV Listings
300
305
400
415
500
550
888
600
Enlarge a Teletext page
Press q repeatedly to display the upper teletext part, the lower teletext
part and then to return to the normal teletext page size.When the teletext
page is enlarged, you can scroll the text, line by line using the cursor
up/down.
Hold
Press the ‡ key to stop the pagecounter from seeking when you have
entered a wrong pagenumber or when the page is not available.
Enter another page number.
Hypertext
With hypertext you can quickly jump to a pagenumber or search for a
specific word shown on the current teletext page.
& Press the OK key to highlight the first word or a number on the page.
é Use the cursor up/down, left/right to select any other word or number you
want to search for.
“ Press the OK key to confirm.The search starts.
A message appears at the bottom of the screen to indicate the searching,
or that the word or page is not found.
‘ Use the cursor up to exit hypertext.
21
Teletext menu
The Teletext menu offers various functions to control teletext.
Teletext menu
Reveal
Off
& Switch teletext on and press the MENU key to activate the menu.
Cycle subpages
Off
é Press the cursor up/down to select the menu items.
Language
Group II
“ Press the cursor right or the OK key to activate.
‘ Press the MENU key to leave the teletext menu.
Reveal
Reveals/conceals hidden information on a page, such as solutions to riddles and
puzzles.
Cycle subpages (if subpages are available)
Makes the subpages cycle automatically.
Press the cursor right or the OK key to activate and to deactivate again.
Language
If the displayed characters on screen do not correspond with the characters
used by the teletext broadcaster, you can change the language group here.
Select Group 1 or Group 2 with the cursor right.
Equipment to connect to the side connections
Camera, Camcorder, Game
& Connect your camera, camcorder or game as shown.
é Connect to VIDEO 2 and AUDIO L 3 for mono equipment.
For stereo equipment also connect AUDIO R 3.
S-VHS quality with an S-VHS camcorder is obtained by connecting the SVHS cables with the S-VIDEO input 1 and AUDIO inputs 3.
Do not connect cable 1 and 2 at the same time. This may cause picture
distortion !
Headphone
& Insert the plug into the headphone socket L as shown.
é Press ¬ on the remote control to switch off the internal loudspeakers of
2
3
22
1
the TV.
The headphone impedance must be between 8 and 4000 Ohm. The headphone
socket has a 3.5 mm jack.
In the Sound menu select Headphone volume to adjust the headphone
volume.
Connect Peripheral Equipment
There is a wide range of audio and video equipment that can be connected to your TV.
The following connection diagrams show you how to connect them.
Note:
AV1 can handle YPbPr, S-VIDEO, RGB + HV or VIDEO and L/R Audio;
AV2 VIDEO or S-VIDEO and L/R Audio;
AV3 YPbPr and Digital Audio;
DVI (analogue and digital) and HDMI (digital);
Side VIDEO or S-VIDEO and L/R Audio.
It is preferable to connect peripherals with RGB output to AV1 or AV2 as RGB provides a better picture quality.
ANTENNA
HDMI
DVI
75
HDMI DVI
ANTENNA
HDMI
DIG.AUDIO
AV3
AV1
MONITOR
OUT
DVI
75
AV2
23
Recorder (VCR-DVD+RW)
AV1
CABLE
ANTENNA
75
3
AV1 :
L + R + VIDEO
OUT
OUT
IN
RECORDER
Note: Do not place your recorder too close to the screen as some recorders may be susceptible to signals from the display. Keep a minimum
distance of 0,5 m from the screen.
& Connect the RF Antenna cable 1 to the RF IN socket of your recorder.
é Connect another RF cable 2 from the output OUT of your recorder to the TV’s input CABLE/ANTENNA 75 ø x jack.
“ Better playback quality can be obtained if you also connect the Video, Audio Left and Right (only for stereo devices) AV cables 3 to
the VIDEO, AUDIO L and R input jacks of AV1.
If your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable with the S-VIDEO input instead of connecting the recorder to the VIDEO
jack of AV1.
S-Video does not provide audio, so audio cables must still be connected to provide sound.
24
Recorder and other equipment
AV2
AV1
ANTENNA
75
CABLE
AV2 :
L + R + VIDEO
5
3
AV1 :
L + R + VIDEO
1
4
OUT
OUT
IN
IN
2
RECORDER
& Connect the RF antenna cable 1 of the RF IN socket of your other AV device.
é Connect the RF output of the AV device to the RF input of the recorder 2.
“ Connect another RF cable 4 from the output OUT of your recorder to the TV’s input 75 Ohm x jack.
‘ To obtain better picture quality, also connect the Video or S-Video, Audio left and Audio right cables of both devices to AV1
(VIDEO or S-VIDEO, AUDIO L and R,) 3 and to AV2 (VIDEO or S-VIDEO, AUDIO L and R) 5.
Notes:
- In case of mono equipment, only the left loudspeaker reproduces sound. Use a mono to stereo adaptor (not supplied) for sound reproduction
via all internal loudspeakers.
- When using the S-VIDEO connector do not connect any device to the AV2 VIDEO or AV1 VIDEO input.
VIDEO CABLE
RF IN
6
L / Mono
R
IN
The MONITOR OUT connector can be used for a daisy chaining or to
record programs from your TV 6. Only when a recorder is connected to
MONITOR OUT it is possible to record an analog program from your TV.
See Record with your recorder, p. 30.
OUT
RECORDER
25
DIGITAL AUDIO
DVD Player or other accessory digital source equipment
AV3 AV1
Devices with Component Video Output Connectors (YPbPr)
This TV is capable of displaying 1080i, 720p, 576p and 480p DTV signals
when connected to a DTV tuner Set Top Box. Select the output of the Set
Top Box to either 1080i, 720p, 576p or 480p. A DTV signal must be
available in your area.
& Connect the three separate component video cables 1 to the device
IN2
IN1
2
YPbPr
AUDIO
L+R
1
3
1
YPbPr
having component video outputs (YPbPr), such as Set Top Boxes, DVDplayers, laser-disc players, videogame players, satellite receivers or other
equipment, and to the Y, Pb and Pr jacks of AV1 or AV3 on the TV.
• Connect to the Y, Pb and Pr jacks of AV1 in case of devices with analog
audio signals.
• Connect to the Y, Pb and Pr jacks of AV3 in case of devices with digital
audio signals.
é In case of a device with digital audio, connect the audio cable 2 to the
DIGITAL AUDIO OUT of the device and to the DIG. AUDIO IN of the TV
or to your Home Cinema system.
In case of a device with analog audio, connect the audio cable to the
device’s AUDIO L and R 3 jacks and the L and R audio jacks of AV1.
DVD / STB
AV1
AUDIO
L+R
YPbPr
2
1
H+V
Devices with RGB output
& Connect the device with RGB output with separate Horizontal and Vertical
sync to the Pr/R Pb/B Y/G input 1 jacks and to the H and V jacks of AV1
2.
é Connect the audio cables to the L and R AUDIO jacks of AV1 3.
3
Devices with an S-Video connector
& Connect an S-Video cable to the AV1 or AV2 S-VIDEO input 1.
Note: When using the S-VIDEO connector do not connect any device to the AV2
VIDEO or AV1 VIDEO input that you are using.
é Connect the audio cables to the device’s AUDIO L and R jacks and to the
L and R audio AV1 or AV2 jacks 2 on the TV accordingly to where you
connected the S-Video cable.
DVD / STB
AV1
AV2
AV1/AV2 :
S-VIDEO
1
2
AV1/AV2 :
L+R
Notes
- If necessary, you can adjust the picture position to the center of the screen with the
cursor keys.
- The labels for the component video sockets may differ depending on the DVD
player or the device connected. Although the abbreviations may vary, the letters B
and R stand for the blue and red component signals, respectively, and Y indicates
the luminance signal. Refer to the DVD player’s or devices instructions for use for
definitions and connection details.
- This television is designed to accept high definition signal standards 480p, 576p,
720p and 1080i as specified by the Electronic Industries Association standard
EIA770.3.
Digital devices from different manufacturers have the possibility of differing output
standards which may cause difficulties for the television to properly display.
- Due to possible digital image distortion when displaying signals from connected
digital equipment, automatically the Auto picture setting Soft is selected, if you
selected Digital STB in the Source menu. See Picture menu, Auto picture, p. 19.
Changing this setting during reviewing will not be stored as Personal setting after
switch off.
Warning: in case you notice scrolling images, wrong colors or no color, no picture, or
even combinations of these on your screen, check if the connections are done in the
correct way or move your digital device further away from your TV.
DVD / STB
26
MultiChannel Surround receiver
• Digital MultiChannel Surround receiver
DIGITAL AUDIO
DIGITAL
AUDIO
OUT
Connect a digital MultiChannel Surround receiver to the DIGITAL AUDIO OUT connector at the bottom of the TV.
27
Devices to connect to a HDMI (High Definition Multimedia Interface) connector
HDMI is the leading new standard for Digital video and audio interconnection.
To the HDMI connector you can connect HDMI peripheral equipments such as compatible DVD-R or DVD player with HDMI.
So you can display high-definition pictures on this TV in the digital form.
HDMI
HDMI
ANTENNA
DVI
75
HDMI
& Connect your HDMI equipment with the HDMI connector.
é Select the connected digital peripheral equipment in the Setup, Source menu, p. 13.
The HDMI IN connector allows the following TV and monitor display modes:
HD
Standard Definition TV (SDTV)
640x480i
720x480i
720x576i
PC
Enhanced Definition TV (EDTV)
640x480p
720x480p
720x576p
High Definition TV (HDTV)
1920x1080i
1280x720p
VGA
SVGA
XGA
640x480
800x600
1024x768
Notes:
- If necessary, you can adjust the picture position to the centre of the screen with the cursor keys.
- Due to legal requirements, it is possible that with certain copy protected PCM audio qualities from a peripheral equipment connected to the HDMI
input, the Digital audio output signal is muted.
- Your TV supports HDCP (High-bandwidth Digital Content Protection). This is a system for protecting DVD content outputted via DVI from being
copied. It provides a secure digital link between a video source (DVD, PC, etc.) and your TV. Content is encrypted at the source peripheral
equipment to prevent unauthorised copies from being made.
- Proper working is only guaranteed with HDMI compliant consumer products.
- Digital peripheral equipments from different manufacturers have the possibility of differing output standards which may cause difficulties for the
television to properly display.
- In case no signal is detected from your HDMI equipment, switch off the HDMI equipment and then on again.
To get an optimal viewing, it is advised to switch your DVD player to one of the following TV display standards: 1920x1080i, 1280x720p, 720x576i,
720x576p, 720x480i, 720x480p.
28
Devices to connect to a DVI connector
AUDIO
DVI
DIGITAL AUDIO
DVI
ANTENNA
75
L
HDMI
IN2
IN1
OUT
DVI
R
4
1
2
3
VGA
....
....
The DVI connector allows the following TV and monitor display modes, via the v key on the remote control, for High Definition (HD) and
computer (PC) equipment:
HD
PC
Standard Definition TV (SDTV)
640x480i
720x480i
720x576i
Enhanced Definition TV (EDTV)
640x480p
720x480p
720x576p
High Definition TV (HDTV)
1920x1080i
1280x720p
VGA
SVGA
XGA
640x480
800x600
1024x768
Note: If necessary, you can adjust the picture position to the centre of the screen with the cursor keys.
& Connect your equipment to the DVI connector of your TV 1.
According to the type of connector of your equipment, you may have to use an appropriate adapter.
DVD
Connect the DVI to DVI cable to the DVI connector of your TV 1.
Computer (PC):
- with a DVI connector: connect the DVI to DVI cable to the DVI connector of your TV 1.
- with a VGA connector: connect the VGA cable to a VGA to DVI adapter 4 and connect to the DVI connector of your TV 1.
é Connect the audio cable 2 to the DVI AUDIO R (right) and L (left) inputs of the TV when the TV expects analogue audio for a
connected peripheral equipment to come from an analogue audio input
OR
Connect the audio cable 3 to one of the DIGITAL AUDIO IN connectors of the TV when the TV expects digital audio for a
connected peripheral equipment to come from a digital audio input.
Then also make your selection of the source to which the peripheral equipment with digital audio input has been connected in the
Setup, Source menu. See Digital audio, p. 14.
29
Record with your recorder
PQRS
7
TUV
WXYZ
8
9
.@
i
0
0
ON/OFF
Ambilight
MODE
®
Ò
q
VIEW
Record a TV programme
You can record a TV programme using your recorders tuner without affecting
your TV.
& Select the channel number on your recorder.
é Set your recorder to record.
See the handbook for your recorder.
Switching channel numbers on your TV does not disturb recording !
†
‡
- FAVORITES -
º
✓
π
Record a programme from MONITOR OUT
You can record a programme on your recorder from the TV tuner via
MONITOR OUT.
& Switch on the device.
é Select the channel or wanted device on your TV and the correct input on
your recorder.
“ Set your recorder to record.
You record the tuner channel of the TV or selected device.
Do not switch channels or turn off your TV when you are recording through
MONITOR OUT.
To select connected peripherals
& Press the v key and then press this key repeatedly or select Source in
the Set up menu (see p. 13) to select AV1, AV2, AV3, HDMI, DVI, Side or
TV, according to where you connected your peripheral equipment.
é Press the cursor up/down.
B
“ Press OK.
DVD/R SAT TV VCR AUX
v
SELECT
k
T
DEMO
BROWSE
b
=
MOT
®
30
®
OK
®
Audio- and video equipment keys
Most of the audio and video equipment from our range of products can be
operated with the remote control of your TV.
B
DVD/R SAT TV VCR AUX
v
k
SELECT
T
DEMO
BROWSE
b
=
MOT
®
OK
®
®
®
b
MENU
+
+
V
¬
P
-
-
_-
ABC
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
DEF
.@
i
0
0
ON/OFF
Ambilight
MODE
®
Ò
q
VIEW
‡
†
- FAVORITES -
º
✓
π
Normal mode
Press one of the keys after you pressed the SELECT key repeatedly according
to the equipment you want to operate with this remote control. See Use of
the remote control, p. 4.
B
º
®
Ò
to switch to standby
for pause,
for record,
for rewind (VCR, CD);
search down (DVD)
‡
for stop,
π
for play,
†
for fast forward (VCR, CD);
search up (DVD)
i
to display information
MENU to switch the menu on or off
- P + for chapter, channel, track
selection
0 to 9 digit entry,
cursor up/down
to select the next or the
previous disc (CD)
cursor left/right
to select the previous or
following track (CD)
0
to select a DVD title/chapter;
index (AUX)
b
to select your choice of
subtitle language (DVD)
Notes:
- If no action is being undertaken within 60 seconds, the remote control returns to TV
mode.
- After an action in the selected system mode, the remote control will remain in this
mode for 60 seconds and will then return to TV mode or press the SELECT key to
return to TV mode immediately.
Expert mode
When you do not want the remote to go back to TV mode, and to stay in the
mode selected, proceed as follows:
& Select TV mode with the SELECT key.
é Press the SELECT key again simultaneously with the OK key for at least 2
seconds.
“ Select the desired mode with the SELECT key.
The remote will not go back to TV mode from now on and will remain in the
mode selected.To go back to the default setting of the remote (TV mode)
repeat what is explained above, selecting the TV mode.
Note: LED behaviour
- If the LED blinks once after pressing the SELECT key simultaneously with the OK
key for at least 2 seconds, the remote control is in Expert mode and the remote
control remains in the mode selected.
- If the LED blinks 4 times after pressing the SELECT key with the OK key for at
least 2 seconds, the remote control is in Normal mode and the remote control
returns to TV mode after 60 seconds.
Direct selection of a connected peripheral equipment
When the remote is in TV Expert mode you may directly select a connected
equipment in the following way:
Press:
- The v key followed by digit ‘1’ to select the device connected to AV1.
- The v key followed by digit ‘2’ to select the device connected to AV2.
- The v key followed by digit ‘3’ to select the device connected to AV3.
- The v key followed by digit ‘5’ to select the device connected to DVI.
- The v key followed by digit ‘6’ to select the device connected to HDMI.
- The v key followed by digit ‘0’ to select the device connected to the side.
Note: Make sure your equipment is switched on.
31
Setting the remote control to work peripheral equipment
Your TV remote control gives you the opportunity to control all your peripheral equipments with one single remote control.This can be
done by selecting the correct brand and type out of the list of Direct Entry codes for peripheral equipments.
Press the SELECT key repeatedly to select DVD/R, SAT, VCR or AUX according to the peripheral equipment you want to operate with
this remote control. See Use of the Remote control, p. 4. If the function keys on the remote control also work the selected peripheral
equipment, then the remote is ready and no further steps are needed.
If the function keys do not work with the selected peripheral equipment, according to the equipment(s) you own, you may make your
remote control ready for them by a direct entry code. Proceed as following.
Code setup
& Press the SELECT key repeatedly to select your source according to the
peripheral equipment you want to operate with this remote control.
é Press the SELECT and B key at the same time for longer than 4 seconds.
B
DVD/R SAT TV VCR AUX
“
v
‘
SELECT
k
T
DEMO
BROWSE
=
b
(
MOT
®
®
OK
®
§
®
b
MENU
+
V
+
¬
-
P
-
_-
ABC
DEF
1
2
3
GHI
JKL
MNO
The selected mode LED will lit constantly.
Input the 3-digit code for the type and brand of peripheral equipment.The
codes are listed on page 33.
The selected mode LED will blink fast for 5 seconds as a confirmation you
entered a correct code.The remote will go back to the last selected mode.
If you entered a wrong code the mode LED will stay on for 2 seconds.
Redo step “.
Now you will try to use the TV remote with the peripheral equipment.
Press the SELECT key repeatedly to select the desired mode.The selected
mode LED will stay on for 2 seconds and then begin blinking.The blinking
means that the remote is in the external mode you have selected.
Within 60 seconds from the time the blinking starts, point the remote
toward the peripheral equipment and press the B key. If the peripheral
equipment does not respond to the B command, follow the steps for
programming the remote again using a different setup code for the type
and brand of peripheral equipment you wish to operate. Refer again to the
code list on page 33. If no more codes are listed for the type and brand of
external equipment, the remote likely will not operate your particular
model of peripheral equipment.
Notes:
- Your TV remote is not necessarily capable of being programmed to operate all
models of the brands of peripheral equipments listed on page 33.You may want to
try the programming process again. Try using the number(s) that are listed for your
type and brand of peripheral equipment to be sure you did not make a mistake in
inputting the digits during your first attempt at programming.
- If the remote control is in one of the external modes (a mode light is flashing) —
DVD/R, SAT, VCR or AUX — and you don’t press any of the remote keys for sixty
seconds, a “time-out” occurs, returning the remote to TV mode.
To cancel the selected mode
Press the SELECT key for 2 seconds.
The remote control will return to TV mode.
32
Remote Control Direct Entry Codes for Peripheral Equipment
CD
Bose..............................................................512
Hitachi..........................................................501
JVC................................................................504
Kenwood .....................................................502
Panasonic.....................................................505
Philips ...........................................................500
Pioneer ........................................................511
Samsung.......................................................506
Sharp ............................................................507
Sony..............................................................508
Technics .......................................................509
Thomson .....................................................503
Yamaha.........................................................510
Digital Video Disc (DVD)
Aiwa ..............................................................502
Alba.......................................................503, 504
Bush ............................................................ 505
CyberHome ......................................506, 507
Daewoo ........................................................508
Dansai ..........................................................509
Denon ..........................................................543
Goodmans ...................................................510
Grundig................................................511, 512
Hitachi .........................................................513
JVC........................................................514, 515
Kenwood .....................................................540
LG.................................................516, 517, 518
Mustek ................................................519, 544
Panasonic ..........................520, 522, 523, 541
Philips ...................................................500, 524
Pioneer .........................................................525
Samsung .....................................526, 527, 528
Sanyo .............................................................529
Scott ..............................................................530
SEG .......................................................531, 532
Sharp .............................................................533
Sony .............................................534, 535, 536
Thomson ......................................................501 .
Toshiba ................................................537, 538
Yamaha..........................................................539
Satellite Receiver
Akai ..............................................................500
Alba.............................................501, 502, 503
Allsat ............................................................500
Amstrad ..............................................505, 524
Ankaro .........................................................507
Anttron ...............................................501, 503
Apollo ..........................................................501
Armstrong...................................................505
Asat ..............................................................500
Astra.............................................................505
Astro ..................................503, 504, 507, 510
Audio Ton....................................................503
Best...............................................................507
Blaupunkt ....................................................510
Brain Wave ..................................................511
BSkyB ...........................................................524
Bush .....................................................502, 512
CityCom......................................................502
Clatronic......................................................511
Condor ........................................................507
Crown..........................................................505
Daeryung.....................................................509
DNT ....................................................500, 509
Echostar..............................................509, 515
Einhell..................................................501, 505
Elta ..............................................500, 501, 507
Emme Esse .........................................507, 512
Ep Sat ...........................................................502
Eurosat.........................................................505
Eurosky ...............................................505, 507
Eurostar.......................................................505
Ferguson ....................................502, 512, 519
Finlandia.......................................................502
Finlux............................................................502
Fuba ...........................500, 501, 507, 509, 510
Galaxis .........................................................507
GMi...............................................................505
Goodmans...................................................502
Grundig ............502, 503, 510, 512, 518, 524
Hanseatic.....................................................513
Hirschmann.................................................510
Hisawa..........................................................511
Hitachi.................................................502, 512
Huth.....................................................505, 511
Intertronic...................................................505
Johansson ....................................................511
Kathrein .....................................500, 510, 520
KR.................................................................503
Kreiselmeyer ..............................................510
Kyostar.........................................................501
Lasat.....................................................504, 507
Lenco ...........................................................501
Macab ...........................................................519
Manhattan ..................................502, 504, 512
Marantz........................................................500
Mascom .......................................................504
Maspro ................................................502, 512
Mediamarkt.................................................505
Medion...............................507, 513, 515, 516
Metronic............................501, 503, 504, 522
Metz .............................................................510
Minerva........................................................510
Mitsubishi............................................502, 510
Morgan’s..............................................500, 505
Nikko ...........................................................505
Nokia ..........................................502, 512, 514
Nordmende ......................501, 502, 504, 519
Novis............................................................511
Octagon ..............................................501, 503
Okano ..........................................................505
Orbitech......................................................501
Otto Versand ..............................................510
Pace ....................................502, 510, 512, 524
Palladium .....................................................505
Panasonic ..................................502, 512, 524
Panda............................................................502
Philips ........................500, 502, 506, 512, 517
Phonotrend.................................................502
Predki...........................................................511
Provision......................................................504
Quadral........................................................507
Quelle ..........................................................510
Radiola .........................................................500
Radix ............................................................509
RFT ...............................................................500
Saba......................................................504, 512
Sabre ............................................................502
Sagem ...........................................................519
Samsung.......................................................501
Satcom ................................................511, 513
SatPartner .........................501, 503, 504, 511
Schneider ...................................507, 515, 516
Seemann..............................................505, 509
SEG ............................501, 507, 511, 513, 523
Siemens........................................................510
Skymasters ...............513, 515, 516, 521, 528
Sony ............................................................528
Strong .........................................501, 503, 507
Sunstar .........................................................505
Tandberg......................................................519
Tandy............................................................503
Tantec..................................................502, 512
TechniSat .....................................................509
Teco..............................................................505
Telasat ..........................................................513
Telefunken ..........................................501, 512
Teleka..........................................503, 505, 509
Telemaster...................................................504
Telesat ..........................................................513
Televes .........................................................502
Thomson ..................502, 519, 525, 526, 527
Thorn ..................................................502, 512
Tonna............................................................502
Triax .............................................................510
Unisat...........................................................505
Unitor ..........................................................511
Universum...................................................510
Visiosat................................................511, 515
Vortec ..........................................................501
Wewa ...........................................................502
Winersat .....................................................511
Wisi.............................................502, 509, 510
Zhnder .......................................504, 507, 522
VCR
Daewoo ..............................................502, 503
Hitachi ........................................................ 505
JVC................................................................506
LG ........................................................508, 509
Loewe ..........................................................538
Panasonic..................511, 512, 513, 514, 515,
.............................................516, 517, 518, 538
Philips ................500, 519, 520, 521, 522, 523
Saba ...............................................................539
Samsung....................................................... 525
Sony............................527, 528, 529, 530, 531
Thomson .......................... 533, 536, 537, 539
Toshiba .................................................534, 535
33
Learnable remote control
Your TV remote control supports a learnable function which makes it possible to read out codes coming from another remote control
from equipment from another brand.
This makes it possible to use only one remote control to control all your other connected peripheral equipment.
For the following equipment the highlighted keys are programmable.
Note:You can put whatever function of your other device remote under one of the highlighted keys.
DVD/R
SAT
VCR
AUX
B
B
B
B
DVD/R SAT TV VCR AUX
DVD/R SAT TV VCR AUX
DVD/R SAT TV VCR AUX
v
v
v
k
SELECT
T
DEMO
BROWSE
k
SELECT
=
b
BROWSE
=
b
k
SELECT
T
DEMO
BROWSE
BROWSE
=
v
T
DEMO
T
DEMO
DVD/R SAT TV VCR AUX
k
SELECT
b
=
b
®
®
OK
®
®
OK
®
OK
®
MOT
®
®
MOT
OK
®
MOT
MOT
®
®
®
®
®
®
b
MENU
+
¬
V
-
®
b
MENU
+
+
P
V
-
-
¬
b
MENU
+
+
P
V
-
-
¬
+
+
P
V
-
-
_-
ABC
DEF
_-
ABC
DEF
_-
ABC
1
2
3
1
2
3
1
2
3
MNO
GHI
JKL
MNO
5
6
GHI
JKL
MNO
GHI
JKL
DEF
b
MENU
+
¬
P
-
_-
ABC
1
2
3
GHI
JKL
MNO
DEF
4
5
6
4
5
6
4
PQRS
TUV
WXYZ
PQRS
TUV
WXYZ
PQRS
TUV
WXYZ
9
7
8
9
0
0
i
0
0
Ambilight
MODE
ON/OFF
Ambilight
MODE
7
8
9
7
0
0
i
8
0
0
i
Ambilight
MODE
ON/OFF
Ambilight
MODE
ON/OFF
.@
i
ON/OFF
®
Ò
‡
q
VIEW
✓
†
®
º
π
Ò
‡
- FAVORITES -
q
VIEW
5
6
TUV
WXYZ
8
9
7
.@
.@
- FAVORITES -
4
PQRS
✓
†
®
º
π
q
Ò
.@
‡
†
- FAVORITES -
º
✓
π
VIEW
®
q
Ò
‡
†
- FAVORITES -
º
✓
π
VIEW
& Press the SELECT key of your TV remote control repeatedly to select your destination source (e.g. DVD,VCR,...).
é Press the OK key and the B key simultaneously for at least 4 seconds.
“
‘
(
§
The LED of the selected source on your TV remote control will light up constantly.
Press a valid destination key on your TV remote control under which you want to copy a certain function from the remote control
of the selected external equipment.
Place both remote controls face to face so that the infrared signals can be exchanged.
Press for about 2 seconds on the remote control of your external device the function key you want to be learned by your TV
remote control.
The LED of the selected source on your TV remote control is blanked during the capture of the signal.
When the function is copied, the LED is lit again.
Repeat steps “ to ( again to copy other functions.
è To exit the learnable mode:
Press the key at the side of your TV remote control for about 2 seconds.
Your remote control will remain the last selected mode.
Note: If a code from the remote control of your external equipment is not recognised by the TV remote control, the LED of the selected source
will blink for a few seconds. This means that the code transfer did not succeed.
34
To put the remote control function keys back to the factory mode
& Press the SELECT key repeatedly to select TV mode.
é Press the OK key and the ¬ key simultaneously for at least 5 seconds.
All the SELECT LEDS will light up.
“ Press the SELECT key
• 1x: DVD/R is lit up
• 2x: SAT is lit up
• 3x: VCR is lit up
• 4x: AUX is lit up
• 5x: DVD/R, SAT, VCR, AUX are lit up.
‘ Press the OK key when one or all mode LEDS are lit.
The function keys which were ‘learned’ will be erased or from the selected destination source or from all the external equipment at
once. All the keys from the TV remote control will have their factory function again.
35
Tips
Symptoms
Items to Check and Actions to follow
Poor Picture
•
•
•
•
•
•
•
Are the supplied cables connected properly ? (The aerial cable to the TV, the other aerial to your
recorder, the power cables.)
Has the child lock been switched off ?
In case of weak or bad signal, consult your dealer.
Check if you selected the correct source.
No photo, music
or video play or in
poor quality only
•
Check if the source complies with a supported code.
Digital distortion
•
•
The low quality of some digital picture material may be the cause of digital image distortion. In this case
select the Soft setting using the Picture menu, Smart Picture, without changing the picture settings
manually.
Select Digital STB in the Source menu (p. 13) to automatically switch to the Soft setting.
No sound
•
•
No sound on any channel? Check the volume isn’t at minimum.
Is the sound interrupted with the mute key ¬?
Good sound but poor
colour or no picture
•
Adjust the contrast, colour, tint and brightness setting.
Try another smart picture setting.
No solution found
for your picture or
sound problem ?
Switch your TV off and then on again once. Never attempt to repair a defective TV yourself.
Check with your dealer or call a TV technician.
Remote control
• Check if the remote control is in the correct mode.
• If your TV no longer responds to the remote control, the batteries may be dead.
• You can still use the MENU key and the -/+ keys on top of your TV.
Standby
Your TV consumes energy in the standby mode. Energy consumption contributes to air and water pollution.
Power consumption: < 1 W
No stable or not
synchronised VGA
picture
• Check if you have selected the correct VGA mode in your PC.
• See HDMI connector, p. 28.
Control of
peripheral equipment
The infrared signals of the screen may influence the reception sensibility of other peripherals
Solution: replace the batteries of the remote control of other peripheral equipment.
E.g. keep away a wireless headphone from within a radius of 1 meter.
Motorised swivel
Objects between the remote control and the remote control swivel may prevent proper operation. See p. 3.
Miscellaneous
See Extras, Specifications on this CD.
No Picture
36
•
Have you selected the correct TV system in the manual installation menu?
Is your TV or house aerial located too close to loudspeakers, non-earthed audio equipment or neon
lights, etc.?
Mountains or high buildings can cause double pictures or ghost images.
Sometimes you can improve the picture quality by changing the direction of the aerial.
Is the picture or teletext unrecognisable? Check if you have entered the correct frequency.
See Installation, Manual installation, p. 8.
Annex 1 - Philips TV software upgrade with portable memory
Introduction
Philips offers software upgrade capability for your TV using portable
memory.
After you have completed a software upgrade, your TV will typically
perform better.
What improvements are made depends on the upgrade software you are
using as well as the software your TV contained before the upgrade.
You can execute the software upgrade procedure yourself.
Be aware that the content of this document is addressing technical or
software skilled users.
Preparing a portable memory for software upgrade
For the procedure you will require:
• A personal computer with web browsing capability.
• An archive utility that supports the ZIP-format (e.g.WinZip for Windows
or Stuffit for Mac OS).
• A preferably empty USB memory stick or memory card (if available).
Supported memory cards (if available): CompactFlash Card Type I & II, IBM
Microdrive, Memory Stick, SecureDigital Card / Mini SD Card, SmartMedia
Card, MultiMedia Card.
Note: Only FAT/DOS-formatted portable memory is supported.
New software can be obtained from your dealer or can be downloaded
from the www.philips.com/support website:
& Go to www.philips.com/support using the web browser on your PC.
é Follow the procedure to find the information and the software related to
your TV.
“ Select the latest software upgrade file and download it to your PC.
‘ Decompress the ZIP-file and copy the file “autorun.upg” to the root
directory of the USB portable memory.
Note: Only use software upgrades that can be found on the
www.philips.com/support web site.
Verifying the version of the TV software
Before starting the software upgrade procedure, it is advised to check what
the current TV software is.
Settings
Installation
Software upgrade
Language
Current software info
Automatic installation
Local upgrades/applications
Manual installation
Reshuffle/rename channels
& Select Software Upgrade in the Installation menu.
é Press the cursor right.
The Software Upgrade menu moves to the left panel.
“ Select Current Software Info to observe the version and the description
of the current software.
Preferred channels
Software upgrade
Info
37
Automatic software upgrade procedure
& Switch off your TV and remove all memory devices.
é Insert the USB portable memory that contains the downloaded software
upgrade.
Software Upgrade Application
‘ At startup the TV will scan the USB portable memory until it finds the
Upgrade busy...
Software Id:
“ Switch on your TV with the power key B at the top of the TV.
update content.The TV will automatically go to the upgrade mode. After a
few seconds it will display the status of the upgrade procedure.
TL32E-234
Loading
Done
Validating
Done
Programming
Warning:
• You are not allowed to remove the USB portable memory during the software
upgrade procedure!
• In case of a power drop during the upgrade procedure, don’t remove the USB
portable memory from the TV. The TV will continue the upgrade as soon as the
power comes back.
• If you try to upgrade to a software version lower than the current version, a
confirmation will be asked. Downgrading to older software should only be done in
case of real necessity.
• If an error occurs during the upgrade you should retry the procedure or contact
your dealer.
( When the software upgrade was successful, remove the USB portable
memory and restart your TV with the power switch B at the top of the
TV.
Your TV will start up with the new software.
Note: Once the upgrade is finished use your PC to remove the TV software from
your USB portable memory.
Manual software upgrade procedure
Settings
Installation
Software upgrade
Language
Current software info
Automatic installation
Local upgrades/applications
Manual installation
Reshuffle/rename channels
Preferred channels
Software upgrade
Info
For a manual software upgrade copy the “autorun.upg” file in a directory
called “Upgrades” located in the root of the USB portable memory.
& Insert the portable memory that contains the downloaded software
upgrade.
é Select Software Upgrade in the Installation menu. Go to Local
upgrades/applications.
The TV will list all compatible images available on the USB portable
memory and display the data for each selected upgrade image.
“ Select the correct upgrade image and press the red colour key to start the
upgrade.
Your TV will restart and will automatically go to the upgrade mode. After a
few seconds it will display the status of the upgrade procedure.
Warning:
If you try to upgrade to a software version equal or lower than the current version,
a confirmation will be asked. Downgrading to older software should only be done
in case of real necessity.
‘ When the software upgrade was successful, remove the USB portable
memory and restart your TV with the power switch B at the top of the
TV.Your TV will start up with the new software.
38
Annex 2 - Philips TV Slideshow Format with background music
Notes:
- The latest version of this document can be found on the Philips support website (www.philips.com/support).
Use the type number of your TV (42PF9830/69-79) to find this documentation and other related files.
- Philips can’t be held responsible for any problems that may occur as a result of the content in this document. Errors reported to
Philips will be adapted and published on the Philips support website as soon as possible.
Introduction
This document explains how to make a Philips slideshow file with background audio.
Be aware that the content of this document is addressing technical or software skilled users.
To start the slideshow open the slideshow file in the Multimedia browser of your TV.
& Press the = key on the remote control after having inserted a memory card or USB device and switched on the TV.
é Go to where you stored the slideshow file (.alb) on your portable memory.
“ Select the slideshow file and press the OK key to start the slide show.
‘ To stop a slide show, press the ‡ key.
General Rules
• The slideshow will use plain ASCII XML syntax to allow the creation and editing of the slideshow files using simple
tools.
• All references to network content must be based on the global address of the content.
• Content on a Portable Memory (PM) doesn't have a global address; as a result content from a PM can never be
referenced from a slideshow not stored on the PM itself.
• To maintain portability, a slideshow stored on a PM should ONLY reference content on the same PM. Referencing
global addresses can result in inconsistencies if the PM is used on a non-networked CE device. The latter is however
not forbidden, it is only a recommendation.
• It is preferable that URL’s referencing PM content are based on a relative path starting from the directory where the
slideshow is stored. This path includes the device or drive name of the PM.
An absolute path to content will also be supported.
- relative path: pictures\test1.jpg, tamper.jpg, ..\new\bird.jpg, …
- absolute path: USB1:\pictures1\foo_bar.jpg, C:\f1.jpg, \organization.jpg, …
General Format
The format and syntax below will be used to create the slideshow file (simple ascii text) with the extension .alb (.ALB)
Examples: slshow1.alb, summer_holiday_2004.ALB, test.alb, …
The following syntax should be used to create the text file:
<?xml version="1.0" encoding="ISO-885h9-1" ?>
<philips-slideshow version="1.0" >
<title>Title of the slideshow</title>
<audio>audio_url</audio>
<slide-duration>30</slide-duration>
<slides>
<slide>slide_1_url</slide>
<slide>slide_2_url</slide>
<slide>slide_3_url</slide>
<slide>slide_4_url</slide>
<slide>slide_5_url</slide>
<slide>slide_6_url</slide>
...
<slide>slide_N-1_url</slide>
<slide>slide_N_url</slide>
</slides>
</philips-slideshow>
39
Supported XML-tags
The following table gives a description of the XML syntax.
Tag Name
Use
philips-slideshow mandatory
Description
Philips slideshow signature including the version.
title
optional
The title of the playlist.
audio
optional
The audio-URL following this tag will define the music playing
in the background during the slideshow.
A single song or playlist (.m3u & .pls) are the only valid audio
references. Other reference will not result in any audio
playback. If a single song is referenced the song will be
repeated forever. If a playlist is referenced the playlist will be
played in sequence with a repeat at the end of the playlist.
slide-duration
optional
The default display time (in 0,1 second) of a slide. The TV
application isn’t obliged to support this tag. The TV application
can force the use of one or multiple predefined display times.
slides
mandatory
Identifies the slides to show.
slide
optional
Identifies the URL of the individual slide.
Examples:
See on this CD in the directory Files/Slideshw/....
Copy the directory with the slideshow files to your portable memory.
<?xml version="1.0" encoding="ISO-885h9-1" ?>
<philips-slideshow version="1.0" >
<title>Philips AlbumFile</title>
<audio>Music\Nature.mp3</audio>
<slide-duration>50</slide-duration>
<slides>
<slide>Images\Image01.jpg</slide>
<slide>Images\Image02.jpg</slide>
<slide>Images\Image03.jpg</slide>
<slide>Images\Image04.jpg</slide>
<slide>Images\Image05.jpg</slide>
<slide>Images\Image06.jpg</slide>
<slide>Images\Image07.jpg</slide>
<slide>Images\Image08.jpg</slide>
<slide>Images\Image09.jpg</slide>
<slide>Images\Image10.jpg</slide>
<slide>Images\Image11.jpg</slide>
<slide>Images\Image12.jpg</slide>
</slides>
</philips-slideshow>
40
Annex 3 - Philips TV - Portable Memory and USB
Notes:
- The latest version of this document can be found on the Philips support website (www.philips.com/support).
- The software of your TV is upgradeable. If you have problems first check if you have the latest software installed on your TV. The latest
software, together with instructions, can be found on the Philips support website.
Use the type number of your TV (42PF9830/69-79) to find this documentation and other related files.
- Philips can’t be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this
document. Errors reported to Philips will be adapted and published on the Philips support website as soon as possible.
Digital Content Issues
• Only FAT (DOS) formatted (initialized) portable memory is supported. Errors in this formatting can result in unreadable
content. If such problems appear try to re-format the card. Be aware that formatting the card will also delete all the
content on it (pictures, music, …).
• The following file types are supported: .jpg, .jpeg, .mp3, .alb, .m3u and .pls.
• Only linear JPEG picture formats are supported. Progressive JPEG encodings are not supported.
• The length of a filename or directory name is limited to the length specified by the FAT12/16/32 file systems.
• Max. levels of nested directories is 19.
• Never use the supported file type extensions (.jpg, .jpeg, .mp3, .alb, .m3u and .pls) as extensions for directories as these
directories will be treated as corrupted files.
• The MP3 decoder does not support MPEG1 Layer 1 or Layer 2 playback.
• MP3 Pro files can be played with normal MP3 quality.
• The access and response time of the content on a device can differ depending on the type or brand of the device.
• The access and response time of the content on a device will decrease the more unsupported or corrupted files are on
the device.
Portable Memory Issues
• The following memory cards* are supported by the digital media reader:
- CompactFlash Card (Type I & II) (CF)
- IBM Microdrive
- Memory Stick + Memory Stick Pro
- SecureDigital Card (SD)
- SmartMedia Card (SM)
- MultiMedia Card (MMC)
• XD cards are supported through an external XD compatible card reader (not supplied with the TV) connected to the USB
connector. The same holds for other future memory cards.
• Do not apply excessive force when inserting a memory card into the digital media reader. If the memory card doesn’t fit
or isn’t detected by the TV, try to flip over the card and re-insert it.
• When inserting multiple cards at the same time some card combinations will work. It is however recommended to insert
maximum one memory card at the same time.
* Trademarks and trade names belong to their respective owners.
Digital Camera Issues
If a USB connection between your digital camera and the TV isn’t working, you can try the solutions below to resolve your
problem.
• Make sure your digital camera is switched on and verify if the configuration of your digital camera is correct (see the
manual of your digital camera for more information).
• Some digital cameras allow you to switch off the USB interface. Make sure that the USB interface is switched on before
connecting to the TV.
• Remove the memory card from your digital camera and insert it directly into the digital media reader on the right side of
your TV.
• If you have a digital camera with only internal memory (no removable memory) you can try to copy the content manually
to a memory card or a USB memory device (e.g. Philips KEY product) using a personal computer.
• Some digital cameras allow you to switch between PTP (Picture Transfer Protocol) or “PC Link” and USB Mass Storage or
“PC Drive”. Make sure that you select USB Mass Storage or “PC Drive” on your digital camera.
• If your camera supports different interface settings be sure to try them one by one or contact the reseller of your camera
to find out the correct setting.
41
USB Memory Device Issues
• Devices connected to the USB port of your TV must be “Mass Storage Class” compliant. If your device (digital camera.
MP3 player, portable harddisk, …) is not “Mass Storage Class” compliant it will not be detected by the content browser of
the TV.
• The following subsets of the Mass Storage Class specification are supported:
- The implementation of the TV is based on the “Universal Serial Bus Mass Storage Class Specification Overview” (v1.2,
June 23, 2003) including all documents referenced by the document. The document can be found on the USB
standardisation website (www.usb.org).
- Full support of the USB Mass Storage Class Bulk-Only Transport (bInterfaceProtocol = 50h).
- Full support of SubClass Code = 05h; SFF-8070i spec.
- Full support of SubClass Code = 06h; SCSI transparent command set.
• For large USB memory devices, when you are in the Content Browser, it may take a long time before you can access your
files.
• When using a USB portable harddisk: Due to the high power consumption of the harddisk, it is advised to use the
external power supply of the portable harddisk to guarantee proper working under all conditions.
42
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising