Terzismo | HJA 8514 | Terzismo HJA 8514 User manual

Terzismo HJA 8514 User manual
Integrated Washing Machine
HJA 8514
Installation & Operating Instructions
Introduction
Please read these instructions for use carefully and all other information enclosed with the
washing machine.
Keep all documentation in a safe place for future reference or for any future owners.
Note: this machine is solely for domestic use.
Notes on disposal
All packaging material used is environmentally-friendly and recyclable. Please help dispose of
the packaging via environmentally-friendly means.
Your supplier or local council will be able to give you
details of current means of disposal.
Contents
Page
Introduction
General delivery notes
Safety notes
Quick start
Description of controls
Programme Table
Programme selector
Detergent drawer
Detergents, washing aids and amounts to use
Useful advice for the user
The main wash
Cleaning and routine maintenance
Investigating malfunctions
Technical data
Setting up + installation
2
4
4
5
6
12
14
17
18
20
21
23
24
26
27
Valuable materials can be salvaged from an old appliance via scrap reprocessing.
Note: pull out the mains plug from any old appliance.
Cut the power cable and dispose of it, together with the
plug.
BEFORE SWITCHING ON THE APPLIANCE MAKE SURE
IT IS CORRECTLY INSTALLED AND THAT THE TRANSIT
BRACKETS ARE REMOVED AS SHOWN IN PAGE 27.
When disposing of an old washing machine, please ensure that the door lock is rendered
inoperable to prevent children shutting themselves in the appliance.
2
3
General delivery notes
Please check that the following items are delivered with the appliance:
- Instruction manual
- Certificate of guarantee
- Inlet hose
Check that no damage has occurred during transit, and if so, call your nearest Authorised
Technical Support Service agent.
L) N.B!
If the appliance is installed on a carpeted floor ensure that the ventilation holes on the
base of the appliance are not obstructed.
M) If the appliance is not running properly or breaks down, switch it off, turn off the tap and do
not tamper with the appliance.
Consult only the Authorised Technical Support Service for possible repair and ask them to
use original spare parts.
Failure to comply with the above can compromise the safety of the appliance.
N) If the appliance’s power cable should ever need replacing, consult the Authorised
Technical Support Service
Quick start
Washing
Safety notes
Note:
for cleaning or maintenance of the washing machine.
A) Pull out the plug
B) Turn off the tap
C) Do not touch the appliance when hands or feet are wet or damp. Do not use the appliance
with bare feet.
D) The use of adapters, multiple connectors and/or extensions is not recommended.
Note:
water temperature can reach 90°C during the wash cycle.
E) Check there is no water left in the drum before opening the door.
F) This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
G) Do not pull the power cable or the appliance itself to remove the plug from the socket.
H) The appliance must not be exposed to weather conditions (rain, direct sun, etc...)
I) When moving the appliance never lift it by the controls or by the detergent drawer.
When in transit never rest the door against the trolley or transport the appliance without
the polystyrene base.
4
-
Open the door by using the button “A” (Fig. 1, page 6)
Select laundry and put it in the machine
Close the door
Put detergent in the compartments as indicated in the programme guide in this instruction
manual
Select programme
Wait for the “STOP” indicator light to flash
Press additional function buttons (if required)
-
Press the “Start/Pause” button (page 7)
After few seconds the appliance starts working.
After washing
The indicator light “STOP” will go on.
Wait for the door lock to be released
(about 2 minutes after the programme has finished).
The “Door Security” indicator light will go out.
Switch off the washing machine by turning the selector
to “OFF” position.
Open the door and remove the laundry.
Ensure that the machine is correctly installed in line with the instructions found on page 27.
5
Description of controls
A
Door open button
Important:
A special safety device prevents the door from opening at the end of the wash/spin cycle.
At the end of the spin phase wait up to 2 minutes before opening the door.
Fig. 1
L
DOOR SECURITY indicator light
B
The “Door Security” indicator light is illuminated when the door is fully closed and the machine is ON.
When "Start/Pause" is pressed on the machine with the door closed the indicator will flash
momentarily and then illuminate.
M
If the door is not closed the indicator will continue to flash.
B
P
C D E FG
A
H
I
N
A special safety device prevents the door from being opened immediately after the end of the cycle.
Wait for 2 minutes after the wash cycle has finished and the “Door Security” light has gone out
before opening the door. At the end of the cycle turn the programme selector to "OFF" .
C
START/PAUSE button
Door open button
Door locked indicator light
Start button
Start Delay button
Prewash button
Extra Rinse button
Crease Guard button
Spin Speed Control Knob
Wash temperature control knob
“Time to end” indicator light
Buttons indicator light
Timer knob for wash programmes with OFF position
Detergent drawer
A
B
C
D
E
F
G
H
I
L
M
N
P
When a programme is selected, wait for the “STOP” indicator
light to flash before pressing the "Start/Pause" button.
Press to start the selected cycle (according to the selected cycle one indicator light will go on) .
NOTE: When the "Start/Pause" button has been pressed,
the appliance can take a few seconds before it starts
working.
Changing the settings after the programme has started (PAUSE)
The programme may be paused at any time during the wash cycle by holding down the
"Start/Pause" button for about two seconds. When the machine is in the paused mode, the
indicator light "Time to end" and option buttons will flash.
To restart the programme, press the "Start/Pause" button once again.
If you wish to add or remove items during washing, wait 2 minutes until the safety device
unlocks the door.
When you have carried out the manoeuvre, close the door, press "Start/Pause" button and
the appliance will continue working where it left off.
CANCELLING THE PROGRAMME
To cancel the programme, set the selector to the OFF position.
Select a different programme.
Re-set the programme selector to the OFF position.
6
7
The option buttons should be selected before pressing
the "Start/Pause" button.
D
START DELAY BUTTON
CREASE GUARD button
G
Press the button to select or deselect this function.
The Crease Guard function minimizes creases as much as possible with a uniquely designed
anti-crease system that is tailored to specific fabrics.
Appliance start time can be set with this button, delaying the start by 3, 6 or 9 hours.
Proceed as follow to set a delayed start:
Select a programme (“STOP” indicator light blinks)
Press Start Delay button (each time the button is pressed the start will be delayed by 3, 6 or
9 hours respectively and the corresponding light will blink).
Press START to commence the Start Delay operation (the indicator light associated with the
selected Start Delay time stops blinking and remains ON).
At the end of the required time delay the programme will start.
MIXED FABRICS - the water is gradually cooled throughout the final two rinses with no
spinning and then a delicate spin assures the maximum relaxation of the fabrics.
To cancel the Start Delay function:
press the Start Delay button until the indicator lights will be off (The STOP light blinks) and
the programme can be started manually using the START button or switch off the appliance
by turning the programme selector to off position.
When you are ready to unload, press the "Crease Guard" button, this will drain and spin
ready for emptying.
DELICATE FABRICS – final two rinses with no spinning and then the fabrics are left in water
until it is time to unload. When you are ready to unload, press the "Crease Guard" button –
this will drain.
WOOLLENS/SILK – after the final rinse the fabrics are left in water until it is time to unload
and the button indicator blinking.
If you do not want to spin the clothes and activate drain only:
- Turn the programme selector to the "OFF" position;
E
PRE-WASH BUTTON
This option is particularly useful for heavily soiled loads and can be used only on some
programmes as shown in the programmes table.
Detergent for this programme should be added to the compartment of the soap drawer
labelled “I” (Please refer to Detergent Drawer Section of manual). We recommend you use
only 20% of the recommended quantities shown on the detergent pack and fabric
conditioner should not be used for this programme.
F
EXTRA RINSE BUTTON
Thanks to the new electronic system selecting the ‘Extra Rinse Button’ will enable the
machine to perform a special rinse cycle. This function is ideal for people with sensitive skin
as it removes more of the detergent from the washing. It is advisable to use this function for
very dirty loads where extra detergent has been used and for washing towelling items
whose fibres have a tendency to retain detergent.
This option is only available on the SPORT programme in the SPECIAL programmes
options.
8
- Select programme drain only
;
- Switch on the appliance again by pressing the "Start/Pause" button.
H
SPIN SPEED CONTROL
ROTATES IN BOTH DIRECTIONS
The spin cycle is very important to remove as much water as
possible from the laundry without damaging the fabrics. You
can adjust the spin speed of the machine to suit your needs.
By adjusting the control, it is possible to reduce the maximum
speed, and if you wish, the spin cycle can be cancelled
altogether-position
.
Note:
The machine is fitted with a special electronic device,
which prevents the spin cycle should the load be
unbalanced.
This reduces the noise and vibration in the machine and
so prolongs the life of your machine.
9
WASH TEMPERATURE CONTROL KNOB
I
PROGRAMME selector with "OFF" position
N
Rotates in both directions.
The machine is turned on by
selecting a programme via the
programme selector. This status
will be indicated by the "STOP"
indicator light flashing, this light
will continue to flash until the
machine has started or the
machine is returned to the
"OFF" position.
ROTATES IN BOTH DIRECTIONS
With this device it is possible to reduce, but not increase
washing cycle temperature.
The table of programmes indicate the maximum temperature
advised for each type of wash.
WARNING: THIS TEMPERATURE MUST NEVER BE
EXCEEDED
Press the "Start/Pause" button to start the selected cycle.
L
TIME TO END indicator light
In order to manage your time better, this washing machine features an indicator light system
that keeps you constantly informed on the remaining cycle time.
Once a programme is selected the programme selector remains stationary on the selected
programme till cycle ends.
Switch off the washing machine by turning the selector to "OFF".
Indicator light START:
Remaining time above 60 minutes.
Indicator light 60:
Remaining time less than 60 minutes.
Indicator light 30:
Remaining time less than 30 minutes.
Indicator light 15:
Remaining time less than 15 minutes.
Indicator light STOP:
End of the programme.
Note:
The programme selector must be returned to the "OFF" position
at the end of each cycle or when starting a subsequent wash
cycle prior to the next programme being selected and started.
M
Buttons indicator light
The indicator light around the option buttons will light when specific options are selected.
If you select an option button that is not compatible with the programme required the
button light will not illuminate.
10
11
TABLE OF PROGRAMMES
PROGRAM FOR
PROGRAMME SELECTOR
ON:
WEIGHT
MAX
Kg
TEMP.
°C
6
Up to: 90°
6
Up to: 60°
❙❙
Resistant fabrics
Cotton, linen
90°C
Cotton, mixed
resistant
60°C
Cotton
40°C
●
●
( )
●
●
( )
●
●
40°C AA
6
Up to: 40°
●
●
50°C
3
Up to: 50°
●
●
40°C
2
Up to: 40°
●
●
RINSE
-
-
SPIN
-
-
DRAIN ONLY
-
-
1
Up to: 40°
●
●
1
Up to: 30°
●
●
2,5
Up to: 30°
●
●
3
Up to: 60°
●
●
Mixed, resistant
Very delicate fabrics
WOOLMARK
SILK – HAND
WASH
40°C
30°C
MIXED FABRICS
RESISTANT
FABRICS
A 59’
Please read these notes
When washing heavily soiled laundry it is recommended the load is reduced to 3 kg
maximum.
Up to: 40°
Mixed fabrics and
synthetics
Specials
(*
❙
6
Resistant fabrics
12
CHARGE DETERGENT
( )
* Programme also recommended for low temperature wash (below the indicated
Max. temperature). Programmes according to CENELEC EN 60456.
The spin speed may also be reduced, to match any guidelines suggested on the fabric
label, or for very delicate fabrics cancel the spin completely.
( )
( )
Only with the Prewash button selected. ( Programmes with Prewash button available)
The variable temperature selector allows a reduction in the wash temperature in each
programme.
ATTENTION: With the temperature selector on the 0 position the programme will be
performed with a cold wash.
●
RESISTANT or MIXED
FABRICS
44’
3,5
Up to: 40°
●
●
RESISTANT or MIXED
FABRICS
29’
2
Up to: 40°
●
●
13
SPECIAL “FAST SPIN” PROGRAMME
Programme “FAST SPIN” carries out a maximum spin.
Programme selector
For the various types of fabrics and various degrees of dirt the washing machine has different
programme bands according to: wash cycle, temperature and length of cycle (see table of
washing cycle programmes).
1 RESISTANTS FABRICS
The programmes have been designed for a maximum wash and the
rinses, with spin intervals, ensure perfect rinsing.
The final spin gives more efficient removal of water.
AA SPECIAL PROGRAMME AT 40°C
This special programme has been studied to allow you to obtain the
best washing performance, even at full load, as the 60°C Cotton
programme (the normative cycle), but with the advantage of an
energy saving due to 40°C temperature, instead of 60°C.
90°C
60°C
40°C
40°C AA
2 MIXED AND SYNTHETIC FABRICS
The main wash and rinse gives the best results thanks to the
rotation rhythms of the drum and to the water levels.
A gentle spin will mean that the fabrics become less creased.
50°C
3 SPECIAL DELICATE FIBRES
This is a new wash cycle which alternates washing and soaking
and is particularly recommended for very delicate fabrics. The
wash cycle and rinses are carried out with high water levels to
ensure best results.
40°C
4. SPECIALS
SPECIAL “RINSE” PROGRAMME
This programme carries out 3 rinses with a intermediate spin. It can
be used for rinsing any type of fabric, eg. use after hand-washing.
14
DRAIN ONLY
This programme drains out the water.
WOOLMARK PROGRAMME
A programme dedicated to washing fabrics labelled with the
woolmark . The cycle comprises of alternate periods of activity and
pauses. The programme has a maximum temperature of 40° and
concludes with 3 rinses and a short spin.
SPECIAL SILK PROGRAMME
This washing machine also has a gentle Silk and Hand Wash
programme cycle. This programme allows a complete washing
cycle for garments specified as ‘Hand Wash only’ and laundry
items made from Silk on the fabric label.
The programme has a maximum temperature of 30° and concludes
with 3 rinses and no final spin.
40°C
30°C
SPORTS
The washing machine has a unique Sportswear programme. It is
specially designed to wash mixed sportswear fabrics that cannot be
washed on hotter programmes and is designed to remove the soil
and staining created by participation in sports activities. This
programme starts with a cold prewash that breaks down and
loosens any excess dirt and then washes at a cool 30°C, rinses and
spins slowly for the best care of your heavily soiled, delicate
garments.
“A” WASH 59 '
This specially designed programme maintains the high quality wash
performance identified with the “A” rating whilst greatly reducing the
wash time. The programme is designed for a maximum load of 3
kg with a temperature of 60°C and concludes with 2 rinses and a
high speed spin sequence.
15
A 59’
DAILY WASH 40°C – FAST PROGRAMMES
By maintaining exceptional washing performance, these programmes
allow you to know in advance the necessary time for your everyday
laundry. In fact, this washing machine is equipped with 2 daily rapid
programmes at 40°C, that were just studied for lightly soiled fabrics
and medium or little load.
Detergent drawer
P
The detergent drawer is split into 3 compartments:
- the compartment labelled "I" is for prewash detergent;
DAILY WASH 40°C – FAST 44’
A complete washing cycle (wash, rinse and spin), able to wash in
approximately 44 minutes:
- a maximum load of 3,5 kg;
- lightly soiled fabrics (cotton and mixed fabrics)
We recommend, with this programme, a 30% detergent loading dose
(compared to the normal one), in order to avoid detergent waste.
DAILY WASH 40°C – FAST 29’
A complete washing cycle (wash, rinse and spin), able to wash in
approximately 29 minutes:
- a maximum load of 2 kg;
- lightly soiled fabrics (cotton and mixed fabrics)
We recommend, with this programme, a 20% detergent loading dose
(compared to the normal one), in order to avoid detergent waste.
44’
- the compartment labelled " " is for special additives,
fabric softeners, fragrances, starch, brighteners etc;
- the compartment labelled "II" is for main wash
detergent.
29’
Automatic Variable Capacity
NOTE:
Some detergents are difficult to
utilise. Ensure to use an in drum
dispenser if recommended by
the detergent manufacturer.
Note: Only put liquid products in the compartment
labelled “
”. The machine is programmed to
automatically take up additives during the final rinse
stage for all wash cycles.
The washing machine is fitted with an automatic reduction in consumption system (known as
Automatic Variable Capacity).
This system enables the machine to use the amount of water needed to wash and rinse the
laundry in relation to the particular load.
This results in a reduction in the amount of water used and electricity needed to heat it to the
minimum required, without in any way compromising the washing and rinsing performance.
In fact the amount of water and electricity used will always be appropriate for the amount of
washing.
The washing machine therefore ensures you achieve excellent washing results whilst
respecting the environment and saving you money.
16
17
Dosages
Detergents, washing aids and amounts to use
Choice of detergent
General purpose detergents
-
-
Powder detergents, for a thorough wash, with bleaching agent, particularly suitable for
use in hot wash programmes (60°C and over), for heavily soiled and stained laundry.
Liquid detergents, particularly suitable for grease stains, such as greasy skin marks,
cosmetics and oil.
These detergents are not suitable for washing stained laundry, as they do not contain
bleach.
Biological detergents, not all the products available give a really thorough wash.
Additional laundry aids
-
Water softener, means less detergent can be used where water hardness is classed as
hard to very hard.
Prewash substances, for the programmed treatment of stains prior to the main wash.
Using them means the subsequent wash can be at a low temperature or with bleach-free
detergents.
Fabric softener, prevents static build-up in synthetic fabrics and softens fabrics.
If you own a tumble dryer, clothes are softened even without the use of a fabric softener.
Do not put solvents in the washing machine!
Keep detergents and other laundry products out of children’s reach.
Before pouring in the detergent check that there are no foreign bodies in the detergent
drawer.
Dosage details are usually shown on the detergent packaging. Follow those instructions.
18
Only use detergents which are suitable for use in a washing machine.
You will obtain the best results from your wash with the minimum use of chemical products
and the best care for your laundry if you take into consideration the degree of soiling as well
as the type of detergent to choose.
The amount of detergent to use depends on:
- water hardness: depending on the hardness of the water and the type of detergent used, it
is possible to reduce the amount of detergent.
- the degree of soiling: it is possible to reduce the amount of detergent used depending on
the degree of soiling.
- amount of laundry: it is possible to reduce the amount of detergent when washing only a
small amount of laundry.
Dosage for powder detergent
For normal and low concentration detergents: for normally soiled laundry choose a
programme without prewash.
Put the detergent in compartment “II” of the drawer.
For heavily soiled laundry, choose a programme with prewash.
Put 1/4 of the detergent in compartment “I”, 3/4 in compartment “II” of the drawer.
When using water softeners, first put in the detergent, then add the softener to compartment “II”.
For highly concentrated detergents not in single dose format, follow what is shown on pack
exactly as regards type and amount of dosage.
To avoid the difficulty of checking if the detergent has been taken up, use the dosage aids
provided in the detergent packaging.
Liquid detergent dosage
Liquid detergents may be used in accordance with the instructions on the relevant
packaging, for all programmes without prewash, by using the special container which is
placed in the drum or, for those models that have it, in the special insert for liquid detergents.
19
Useful advice for users
Main wash
Sorting the laundry
-
It is recommended you wash only items which are machine washable with water and
detergent and not dry-clean items.
-
If you need to wash rugs, bedspreads or other heavy items, it is best not to spin them.
-
Sort the laundry according to fabric type, degree of soiling and wash temperature: Always
follow the wash care advice on the garment label for the most suitable care and
treatment of the laundry
Laundry for hot wash
Tips on using your domestic appliance in the most environmentally-friendly and economical
way
Do a full load in your washing machine
To prevent any possible waste of energy, water or detergent we recommend that you put a
full load in your washing machine, not exceeding the recommended maximum load size.
Up to 50% energy saving can be made with one full load compared to two half load washes
When is prewashing really needed?
Coloured, easy-care materials
Only with particularly dirty loads!
Energy savings of 5 to 15% are made by not selecting the prewash option for normal soiled
laundry.
Delicates and wool
Which wash temperature should you choose?
Dry clean
For very delicate items, such as net curtains, underwear, tights etc., you are advised to
use a laundry net or wash bag.
Woollen items must be labelled with the "Pure New Wool" symbol to be washed in the
machine
, and must also be labelled "non-matting" or "machine washable".
Colour often leaks from new coloured items.
This can then colour other lighter items being washed.
We therefore recommend that coloured items should be washed for the first time
separately.
For future washes, colourfast items can only be washed with whites up to 40°C.
Using stain removers before machine washing reduces the need to wash at temperatures
over 60°C.
Energy savings of up to 50% can be made by using a 60°C wash temperature rather than
90°C.
Wash by hand
Items labelled with the following symbol are not suitable for machine washing:
-
Note: when sorting laundry
-
check there are no metal objects in the laundry
(such as paper clips, safety pins, pins, coins
etc...);
button up pillowcases, fasten zips, hook & eye
fasteners, belts and long dressing gown cords;
remove curtain hooks;
pay close attention to the labels on items
if you notice stubborn stains whilst sorting the
laundry, remove them using a special detergent or
a special stain remover.
- We recommend that you do not do a full load of towelling items only as these become too
heavy since they absorb a lot of water.
20
21
The correct way to wash
Preparing the laundry
A) Select the laundry.
Cleaning and routine maintenance
Loading the laundry
B) Open the porthole.
Do not use alcohol-based scourers and / or thinners on the outside of your washing machine,
just a wipe with a damp cloth will suffice. The washing machine needs very little maintenance:
- Cleaning the drawer compartments.
- Cleaning the door glass.
C) Put the laundry in the washing machine.
Close the porthole again, ensuring that no items of
laundry are obstructing the lock.
Cleaning the drawer compartments
Putting detergent in machine
D) Open the drawer, choose the detergent and put in
the correct amount, according to the manufacturer’s
instructions and the advice on page 18.
Add any other laundry aids (see page 18). Close the
drawer again.
Even if it is not strictly necessary, it is good to clean the
compartments for bleaching detergents and additives
occasionally.
A) To do this you just need to pull them out firmly, but
without forcing them.
B) Clean everything in the compartment under running
water.
C) Put everything back in its proper place.
Selecting the wash programme
Cleaning the door glass
Refer to the programme guide or the programme descriptions on the machine to select the
most suitable programme.
Turning the selector knob, the required programme is activated.
Wait for the “STOP” indicator light to flash.
Regularly clean the door glass with a damp cloth. A build
up of soiling and
residues from the water may result in water leaking from
the door.
Do not use abrasive cleaners as they can scratch the
surface.
Press additional function buttons (if required).
Check that the tap is turned on and that the discharge hose is positioned correctly.
Press the "Start/Pause" button.
When the "Start/Pause" button is pressed the machine sets the working sequence in motion.
The programme carries out with the programme selector stationary on the selected
programme till cycle ends.
Warning: If there is any break in the power supply while the machine is operating, a special
memory stores the selected programme and, when the power is restored, it continues where
it left off.
Transporting the appliance or long
periods when appliance is not in
use
If the appliance is being transported or is out of use for
long periods in unheated places, all remaining water
must be completely removed from the hoses.
Ensure mains power is off, then unclip the hose and
point it downwards into a basin until all the water has
emptied out.
When finished, repeat the operation in the reverse order.
When the programme is finished
At the end of the programme the indicator light “STOP” will go on.
Wait for the door lock to be released (about 2 minutes after the programme has finished).
The "Door Security" indicator light will go out.
Switch off the machine by turning the programme selector on the “OFF” position. Open the
door and remove the laundry. Turn off the tap.
22
23
Investigating malfunctions
What might be the cause of…
Defects you can remedy yourself
MALFUNCTION CAUSE
REMEDY
1. Does not work on any
programme
Plug not in socket.
Not switched on.
Power failure.
Fuse blown.
Door open.
Plug it in.
Switch on.
Check.
Check.
Close door.
2. Does not fill with water
See cause 1.
Tap turned off.
Programme selector not correctly
positioned.
Fill hoses are kinked
Check.
Turn on tap.
Position programme selector
correctly.
Straighten fill hoses
Kink in discharge hose.
Straighten discharge hose.
House drain is blocked
Clean drain
4. Water on floor around
the washing machine
Leaking gasket between tap and water
inlet hose.
House drain is blocked
Soap drawer blocked with soap residues
Replace gasket and tighten hose and
tap well.
Clean drain
Clean soap drawer
5. Does not spin
Water has not yet drained away.
Wait a few minutes for machine to empty.
"No spin" selected (certain models only). Reset button or turn "no spin" knob.
6. Machine vibrates a lot
during spin
Washing machine not completely level.
Transit brackets not removed yet.
Load not distributed evenly.
Adjust the special adjustable feet.
Remove transit brackets.
Rearrange the laundry evenly.
7. Door will not open
Two minutes have not elapsed since the
programme finished.
Wait two minutes.
3. Water does not drain
away
The machine makes a
different noise when
spinning! This is because it
has a brush motor for better
performance.
Note:
The use of environmentally-friendly, phosphate-free detergents can have the following effects:
- waste water from rinsing may be cloudier because of the presence of zeolites held in
suspension, without the rinse performance being adversely affected;
- presence of white powder (zeolites) on laundry after washing, which is not absorbed by
the fabric and does not alter the colour of the fabric.
- The presence of foam in the final rinsing water is not necessarily an indication of poor
rinsing.
- Anionic surfactants used in washing detergent formulae often prove to be difficult to
remove from the laundry itself and, even in small quantities, can still cause considerable
foam production.
- Carrying out more rinse cycles does not serve any purpose in such cases.
This appliance is marked according to the European directive 2002/96/EC
on Waste Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this
product.
The symbol on the product indicates that this product may not be treated
as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment
Disposal must be carried out in accordance with local environmental
regulations for waste disposal.
For more detailed information about treatment, recovery and recycling of
this product, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
Only a small level of water can be
seen in the drum! This is because
new machines do not use much
water, yet achieve the same
standard of washing and rinsing.
24
25
SETTING UP + INSTALLATION
1
Remove the polystyrene base and place the machine near
its permanent position (diagram 1).
Carefully cut through the hose retaining clip at the rear of
the appliance (diagram 2).
Remove the 4 fixing screws marked (A) and remove the 4
spacers marked (B) (diagram 3).
Fig. 2
2
For some models 1 or more spacers will fall inside the
machine;
By tilting the machine, remove the mentioned spacers.
Cover the 4 holes using the caps provided in the instruction
booklet pack (diagram 4).
Technical data
■ Max. load of dry laundry for washing
■ Water pressure
■ Cold fill only
■ Spin speed
6 kg
0,05 ÷ 0,8 MPa
3
4
1200 r.p.m.
Measurements
■ Width
■ Depth
■ Height
60 cm
54 cm
82 cm
NB: For specifications regarding electrical data, see the data panel on the front of the washing
machine (porthole area) - as shown in diagram above.
Appliance complies with European Directives 73/23/EEC and 89/336/EEC, replaced by
2006/95/EC and 2004/108/EC, and subsequent amendments.
WARNING:
DO NOT LEAVE THE PACKAGING WITHIN REACH OF CHILDREN AS IT IS A POTENTIAL
SOURCE OF DANGER.
Apply the insulation sheet of corrugated material to the base
as shown.
Note: We recommend you keep the transit bracket,
braces and screws to immobilise the machine for future
transit.
The Manufacturers will not be responsible for any
possible damage to the machine caused by not
following the rules relating to releasing the mechanism.
The user is responsible for all costs of installation.
26
27
Installation & Decor Door Fitting
The appliance requires the following
space:
Snap mount plastic cover cap ‘H’ into the lower
hinge position.
Adjustable Feet
Mount the door and hinges to the front of the
appliance using screws ‘L’.
Note: It is recommended that where possible
the décor door is hinged on the same side as
the appliance door as this will give greater
space to load and unload the washing.
The feet are adjustable to give an appliance
height of 825 mm – 849 mm.
It is important that the feet are adjusted to
ensure that the appliance is level, this is
essential to ensure quiet operation.
Once the feet have been adjusted to the
correct height it is important that they are
locked in position using the locking nuts.
G
Fasten the magnetic catch striker plate ‘D’ to
the front of the appliance, placing the rubber
washer ‘E’ under the plate and screw in place
with screws ‘G’.
2x
L
A
4x
4x
Fitting the Décor Door
The front of the appliance has been drilled to
accommodate the hinges to enable the door to
be opened from the left or right hand side.
We suggest you proceed as follows:
Décor Strip
A décor strip is required to fill the gap between the top of the appliance and the underside of
the worktop. We recommend that facia SKD4189 is used for this purpose and is screwed to
the underside of the work or by KD fixings to the adjacent cabinets.
Note: The infill facia may need to be cut to fit dependant on the height of the appliance.
1) Standard Height Door & Dummy Drawer
Front
Screw the hinges onto the décor door, ‘A’ then
fasten the dummy drawer front to the top edge
of the door. Ensure that the gap between the
door & drawer front matches the units on either
side.
Fasten the magnetic catch ‘B’ using screw ‘C’
to the décor door.
C
1x
28
2) Full Height Door
If a full height door is being used then a top hinge hole will have to be drilled in the door. The
distance between the two hinge holes centres is 384mm and 21.5mm from the edge of the
door.
The hole diameter for the hinge is 35mm and should be drilled to a depth of 12mm, care must
be taken to ensure that you do not drill through the door. The pilot holes for fixing the hinge
should be drilled with 2mm diameter drill.
29
ELECTRICAL CONNECTIONS
Water connection
After installation, the appliance must be positioned so that the plug is accessible.
If the plug we supply does not fit
CUT IT OFF AND DESTROY IT!
You can’t use it on other appliances, and the exposed wires could be dangerous if plugged in.
To fit a replacement plug, proceed as follows:
The appliance must be connected to the water mains using new
hose-sets.
The old hose-sets should not be re-used.
The machine has an inlet hose with 3/4" B.S.P threaded end
connection to attach between the threaded connector on the
appliance and the cold water supply.
This machine only uses cold water, therefore
only one hose is needed to connect to the cold
water supply. Do not connect to the hot supply.
Cold fill is an energy efficient system. Only the
water required for the washing is heated.There
is no loss of heat in the pipeline from a hot
water tank or boiler to the machine.
Connect
to the terminal in the plug
green and yellow wire
marked with the letter E,
OR marked
with the symbol,
OR coloured green,
OR coloured green and yellow.
blue wire
marked N
OR coloured black.
brown wire
marked L
OR coloured red.
WARNING
This appliance must be earthed
Fuses and plugs
This appliance should be used only on a socket with a minimum rating of 13 Amp.
min 4 cm
max 100 cm
Our ready-fitted plug is already equipped with a 13 amp fuse which is BS 1362 ASTA
approved. Any replacement should be exactly the same.
+2,6 mt max
min 50 cm
max 85 cm
Note: It is advisable to turn off the tap after each wash
to isolate the washing machine from the water supply.
For the washing machine to function properly the terminal end of the discharge hose (mouth)
must be at a minimum of 50 cm and a maximum of 85 cm from the ground.
30
If the fuse cover is lost, do not use the plug until it is replaced. A correct replacement fuse
cover (obtainable from your local retailer) must be the same colour as shown or named on
the insert on the base of the plug.
The manufacturer declines all responsibility in the event of any
printing mistakes in this booklet. The manufacturer also reserves the
right to make appropriate modifications to its products without
changing the essential characteristics.
30
HJA 8514
0 845 0060006
41032005
Issue 1
May 2009
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising