Terzismo XPB50-208 User manual
Add to my manuals24 Pages
Terzismo XPB50-208 is a washing machine equipped with several features to assist you in washing your clothes safely. It has a maximum dry clothes load capacity that depends on the model, so please refer to the control panel for specific details. The machine also comes with a 16-character serial number found inside the door opening, which you'll need for warranty registration or contacting customer service.
advertisement
▼
Scroll to page 2
of 24
EN XPB50-208 Thank-you for choosing a Supra washing machine. We are confident it will loyally assist you in safely washing your clothes, even delicates, day after day. Environmental conditions This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used). It is important to have WEEE subjected to specific treatments, in order to remove and dispose properly all pollutants, and recover and recycle all materials. Individuals can play an important role in ensuring that WEEE does not become an environmental issue; it is essential to follow some basic rules: Carefully read this manual for correct and safe appliance use and for helpful tips on efficient maintenance. Only use the washing machine after carefully reading these instructions. We recommend you always keep this manual on hand and in good condition for any future owners. WEEE should not be treated as household waste; Please check that the appliance is delivered with this instruction manual, warranty certificate, service centre address and energy efficiency label. Also check that plugs, drain hose support hook and liquid detergent or bleach tray (only on some models) are included. We recommend you keep all these components. WEEE should be handed over to the relevant collection points managed by the municipality or by registered companies. In many countries, for large WEEE, home collection could be present. In many countries, when you buy a new appliance, the old one may be returned to the retailer who has to collect it free of charge on a one-to-one basis, as long as the equipment is of equivalent type and has the same functions as the supplied equipment. FOR U.K. ONLY On receipt of your appliance please check it carefully for damage. Any damage found must be reported to the delivery driver immediately. Alternatively damage found must be reported to the retailer within 2 days of receipt. Contents 1. GENERAL SAFETY RULES 2. INSTALLATION 3. PRACTICAL TIPS 4. MAINTENANCE AND CLEANING Each product is identified by a unique 16character code, also called the “serial number”, printed on the sticker. This can be found inside the door opening. This code is a unique code for your product that you will need to register the product warranty, or if you need to contact the Customer Service Centre. 5. QUICK USER GUIDE 6. CONTROLS AND PROGRAMS 7. THROUBLESHOOTING AND WARRANTY WM15 GD 2 This appliances is intended to be used in household and similar applications such as: - Staff kitchen areas in shops, offices and other working environments; - Farm houses; - By clients in hotels, motels and other residential type environments; - Bed and breakfast type environments. A different use of this appliance from household environment or from typical housekeeping functions, as commercial use by expert or trained users, is excluded even in the above applications. If the appliance is used in a manner inconsistent with this it may reduce the life of the appliance and may void the manufacturer’s warranty. Any damage to the appliance or other damage or loss arising Water pressure must be between 0.05 MPa and 0.8 MPa. through use that is not consistent with domestic or household use Make sure carpets or rugs do (even if located in a domestic or not obstruct the base or any of household environment) shall not the ventilation openings. be accepted by the manufacturer to After installation, the appliance the fullest extent permitted by law. must be positioned so that the This appliance can be used by plug is accessible. children aged from 8 years and The maximum load capacity of above and persons with reduced dry clothes depends on the physical, sensory or mental model used (see control panel). capabilities or lack of experience and knowledge if they have been To consult the product technical specification please refer to the given supervision or instruction manufacturer website. concerning use of the appliance 3 EN in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Children should be supervised to ensure that they do not play with the appliance. Children of less than 3 years should be kept away unless continuously supervised. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. use the hose-sets Only supplied with the appliance for the water supply connection (do not reuse old hose-sets). 1. GENERAL SAFETY RULES Electrical connections safety instructions Do not expose the washing machine to rain, direct sunlight or other weather elements. Protect from possible freezing. and The technical details (supply voltage and power input) are indicated on the product rating When moving, do not lift the washing machine by the knobs plate or detergent drawer; during Make sure that the electrical transport, never rest the door on system is earthed, complies the trolley. We recommend two with all applicable law and that people lift the washing machine. the (electricity) socket is compatible with the plug of the In the event of fault and/or appliance. Otherwise, seek malfunction, turn off the qualified professional assistance. washing machine, close the water tap and do not tamper The use of converters, multiple with the appliance. sockets or extension cords is Immediately contact the strongly advised against Customer Service Centre and only use original spare parts. Before cleaning or maintaining Failure to observe these the washing machine, unplug instruction may jeopardise the appliance and turn off the appliance safety. water tap. Do not pull on the power cord or appliance to unplug the machine. Make sure there is no water in the drum before opening the door. WARNING: water may reach very high temperatures during the wash cycle. 4 2. INSTALLATION Remove the 2 or 4 transportation screws (A) on the back and remove the 2 or 4 flat washers, rubber bungs and plastic spacer tubes (B) as illustrated in figure 1. If the washing machine is built-in, unscrew the 3 or 4 transportation screws (A) and remove the 3 or 4 flat washers, rubber bungs and plastic spacer tubes (B). During the removal of the screws occasionally spacer tubes fall inside the product, these can be remove by tilting the product forward and recovering them from the floor or inside the base of the machine. Cover the open transportation screw holes with the 2 or 4 plastic caps included in the instruction bag. 1 B B A A EN A B A B 2 A 1 2 3 WARNING: keep packaging materials away from children. Place the corrugated plastic sheet, found on top of the appliance during the unpacking process, into the base of the appliance as shown in figure 2 (according to the model, consider version A, B or C). B In some models this operation will not be necessary, because the corrugated plastic sheet will be already placed on the bottom of the appliance. C 3 2 5 1 Hydraulic connections 3 Connect the water hose to the water supply tap (fig. 3) only using the hose supplied with the appliance (do not reuse old hose-sets). SOME MODELS may include one or more of the following features: HOT&COLD (fig. 4): water mains connection settings with hot and cold water for higher energy savings. Connect the grey tube to the cold water tap and the red one to the hot water tap. The machine can be connected to the cold water tap only: in this case, some programs may start a few minutes later. 4 1 AQUASTOP (fig. 5): a device located on the supply tube that stops water flow if the tube deteriorates; in this case, a red mark will appear in the window “A” and the tube must be replaced. To unscrew the nut, press the one-way lock device "B". 5 6 B AQUAPROTECT – SUPPLY TUBE WITH GUARD (fig. 6): Should water leak from the primary internal tube "A", the transparent containment sheath "B" will contain water to permit the washing cycle to complete. At the end of the cycle, contact the Customer Service Centre to replace the supply tube. A B A 7 Setting The washing machine should be installed in its final position such that the water fill hose is not kinked or trapped. The corrugated drain hose should be inserted into suitable drain pipe of between 50 cm and 85 cm height above the floor using the curved drain hose support. If an under sink connection is used the drain hose must be routed above the sink overfill opening to prevent back siphoning. Care must be taken to avoid kinking or trapping the drain hose (fig. 7). max 100 cm min 4 cm 6 +2,6 mt max min 50 cm max 85 cm Level the appliance using the feet as 8 illustrated in figure 8: a. turn the nut clockwise to release the screw; b. rotate the foot to raise or lower it until it touches to the floor; c. lock the foot, screwing in the nut, until it tightens against to the bottom of the washing machine. Plug in the appliance. A WARNING: C contact the Customer Service Centre should the power cord need replacement. WARNING: Detergent drawer installation faults are not covered by the manufacturers warranty. The detergent draw is split into 3 compartments as illustrated in figure 9: compartment "1": for prewash detergent; compartment “ ”: for special additives, softeners, starch fragrances, etc.; 9 WARNING: 1 only use liquid products; the washing machine is set to automatically dose additives at each cycle during the last rinse. 2 compartment "2": for washing detergent. A liquid detergent cup is also included IN SOME MODELS (fig. 10). To use it, place it in compartment "2". This way, liquid detergent will only enter the drum at the right time. The cup can also be used for bleach when the “Rinse” program is selected. 10 WARNING: some detergents are not designed for use in the dispenser drawer but are supplied with their own dispenser that is placed in the drum directly. 7 EN B reduce the necessity of a hot wash programme. Save energy by using a low temperature wash programme. 3. PRACTICAL TIPS Load tips Before using a drying (WASHER-DRYERS) When sorting laundry, make sure: - have eliminated metallic objects such as hair clips, pins, coins, from laundry; programme SAVE energy and time by selecting a high spin speed to reduce the water content in laundry before using a drying programme. - to have buttoned pillow cases, closed zips, tied loose belts and long robe ribbons; Following is a quick guide with tips and recommendations on detergent use at the various temperatures. In any case, always read the instructions on the detergent for correct use and doses. - to have removed rollers, hooks or clips from curtains; - to have carefully read clothing washing labels; - to have removed any persistent stains using specific detergents. When washing heavily soiled whites, we recommend using cotton programs of 60°C or above and a normal washing powder (heavy duty) that contains bleaching agents that at medium/high temperatures provide excellent results. When washing rugs, bedcovers or other heavy clothing, we recommend you avoid the spinning cycle. To wash wool, make sure the item can be machine washed. Check the fabric label. For washes between 40°C and 60°C the type of detergent used needs to be appropriate for the type of fabric and level of soiling. Normal powders are suitable for “white” or colour fast fabrics with high soiling, while liquid detergents or “colour protecting” powders are suitable for coloured fabrics with light levels of soiling. Helpful suggestions for the user A guide environmentally friendly and economic use of your appliance. Maximise The Load Size Achieve the best use of energy, water, detergent and time by using the recommended maximum load size. Save up to 50% energy by washing a full load instead of 2 half loads. For washing at temperatures below 40°C we recommend the use of liquid detergents or detergents specifically labeled as suitable for low temperature washing. Do you need to pre-wash? For heavily soiled laundry only! SAVE detergent, time, water and between 5 to 15% energy consumption by NOT selecting Prewash for slight to normally soiled laundry. For washing wool or silk, only use detergents specifically formulated for these fabrics. Is a hot wash required? Pretreat stains with stain remover or soak dried in stains in water before washing to 8 Remove and clean the filter; when 4. MAINTENANCE AND CLEANING finished, replace it turning it clockwise. The filter handle will be locked when it is not possible to turn any further and the handle is horizontal. Smearing a small amount of liquid soap on the filter seal will help refitting. To clean the washing machine exterior, use a damp cloth, avoiding abrasives, alcohol and/or solvents. To maintain a good wash performance we recommend that the soap drawer and pump filters are regularly cleaned. A monthly service wash, using a proprietary cleaner is also recommended. Repeat the previous steps in reverse order to reassemble all parts. EN Drawer cleaning We recommend you clean the drawer to avoid accumulating additive residue. detergent and To do this, extract the drawer using slight force, clean it with running water and reinsert it in its housing. Ensure the siphon cap is correctly S u g g e s t io n s f o r m o v e s o r prolonged disuse refitted. Filter cleaning Should the washing machine be stored in an unheated room for a long period of time, drain all water from tubes. The washing machine comes with a special filter able to trap large residue, such as buttons or coins, which could clog the drain. Unplug the washing machine. Detach the tube from the drainage system and clip on the rear of the machine and lower it, fully draining water into a bowl. ONLY AVAILABLE ON CERTAIN MODELS: pull out the corrugated hose, remove the stopper and drain the water into a container. Secure the drain tube with the drainage system and clip on the rear of the machine when finished. Ensure all the water has been emptied Keep the door glass and gasket clean. from the drum. Before unscrewing the filter, we recommend you place an absorbent cloth under it to keep the floor dry. A small amount of water will come out of the filter as you remove it - this is normal. The manufacturers warranty only covers faults within the product of a mechanical or electrical nature. Faults caused by handling, installation or miss use are not covered and may incur a charge for any repair visit to resolve. Turn the filter counter-clockwise to the limit stop. 9 5. QUICK USER GUIDE This washing machine automatically adjusts the level of the water to the type and quantity of washing. This system gives a reduction in energy consumption and a saving in washing times. 6. CONTROLS AND PROGRAMS M A Kg Check °c Program selection Turn on the washing machine and select the required program. L Adjust the washing temperature if necessary and press the required "option" buttons. I Press the START/PAUSE button to start F washing. Should power go out when the washing machine is running, a special memory saves the settings and, when power returns, the machine resumes the cycle from where it left off. At the end of the programme, the message "End" will appear on the display or, on some models, all wash stage indicator lights will turn on. Wait until the DOOR LOCKED light has gone out before opening the door. Turn off the washing machine. For any type of wash, see the program table and follow the operating sequence as indicated. B G H C E D A Programme selector with OFF position B C D E F START/PAUSE button DELAY START button OPTIONS button RAPID / STAIN LEVEL button TEMPERATURE SELECTION button G SPIN SELECTION button H NIGHT & DAY button D+B Start SMART TOUCH F+G KEY LOCK I Digital display L DOOR LOCKED indicator light Technical data Water pressure: min 0.05 Mpa / max 0.8 Mpa (0.05 MPa dispenses approximately 1 litre of water in 10 seconds) Spin r.p.m.: See rating plate. Power input / Power current fuse amp / Supply voltage: See rating plate. 10 Kg Check °c M SMART TOUCH area START/PAUSE button WARNING: Don’t touch the display while inserting the plug because the machines calibrates the systems during the first seconds: touching the display, the machine couldn’t work property. In this case, remove the plug and repeat the operation. Close the door BEFORE selecting the button START/PAUSE. Press to start the selected cycle. When the START/PAUSE button has been pressed, the appliance can take few seconds before it starts working. EN PROGRAMME selector with OFF position ADD OR REMOVE ITEMS AFTER THE PROGRAMMES HAS STARTED (PAUSE) Press and hold the START/PAUSE When the programme selector is turned the display lights up to show the settings for the programme selected. For energy saving, at the end of the cycle or with an inactivity period, the display level contrast will decrease. button for about 2 seconds (some indicator light and the time remaining indicator will flash, showing that the machine has been paused). Wait until the DOOR LOCKED light has N.B.: To switch the machine off, turn the programme selector to the OFF position. gone out before opening the door. Before you open the door, please check water level is below the door opening to avoid flooding. Press the START/PAUSE button to start the selected cycle. After you have added or removed items, Once a programme is selected the close the door and press the START/PAUSE button (the programme will start from where it left off). programme selector remains stationary on the selected programme till cycle ends. "End" will appear in the display at the CANCELLING THE PROGRAMME end of the program and the DOOR LOCKED light will go off, it is now possible to open the door. To cancel the programme, set the selector to the OFF position. Switch off the washing machine by Wait 2 minutes until the safety device turning the selector to OFF. unlocks the door. The programme selector must be returned to the OFF position at the end of each cycle or when starting a subsequent wash cycle prior to the next programme being selected and started. DELAY START button This button allows you to pre-programme the wash cycle to delay the start of the cycle for up to 24 hours. 11 To delay the start use the following procedure: - AQUAPLUS This option (available only in some - Select the required programme. - Press the delay start button once to activate it (h00 appears on the display) and then press it again to set a 1 hour delay (h01 appears on the display). The pre-set delay increases by 1 hour each time the button is pressed, until h24 appears on the display, at which point pressing the button again will reset the delay start to zero. - Confirm by pressing the START/PAUSE button. The delay countdown will begin and when it has finished the programme will start automatically. It is possible to cancel the delay start by turning the programme selector to OFF. programmes) allows you to wash the load in a much larger quantity of water and this, together with the new combined action of the drum rotation cycles, where water is filled and emptied, will give you garments which have been cleaned and rinsed to perfection so that the detergent dissolves completely, ensuring an efficient cleaning action. This function is for the people with delicate and sensitive skin. This function can be used for children’s items and for washing of very dirty items, for which you are required to use a lot of detergent, or for washing of Towels whose fibres have the tendency to hold the detergent. - HYGIENE + If there is any break in the power supply while the machine is operating, a special memory stores the selected programme and, when the power is restored, it continues where it left OFF. Activated when you set 60°C of temperature. This option allows deep cleaning of your clothes by maintaining the same temperature for the whole wash. If an option is selected that is not compatible with the selected programme then the option indicator light first flashes and then goes off. The following options must be selected before pressing the START/PAUSE button. RAPID / STAIN LEVEL button OPTIONS button This button allows you to choose between three different options: This button allows you to choose between two different options, depending on the selected programme. - PREWASHING - RAPID This option allows you to make a prewash and it is particularly useful for heavily soiled loads (can be used only on some programmes as shown in the table of programmes). The button becomes active when you select the RAPID (14/30/44 Min.) programme on the knob and allows you to select one of three durations indicated. - STAIN LEVEL button We recommend you use only 20% of the Once the programme has been selected recommended quantities shown on the detergent pack. the wash time set for that programme will be automatically shown. 12 This option allows you to choose between The machine is fitted with a special electronic device, which prevents the spin cycle should the load be unbalanced. This reduces the noise and vibration in the machine and so prolongs the life of your machine. 3 levels of wash intensity modifying the length of the programme, depending on how much the fabrics are soiled (can only be used on some programmes as shown in the table of programmes). TEMPERATURE SELECTION button This button allows you to change the This option reduces the intermediate spin temperature of the wash cycles. speed to 400 rpm, where applicable, increase the water level during rinsing and keep the laundry immersed in water after the final rinse, in order to spread the fiber perfectly. It is not possible to raise the temperature over the maximum allowed for the programme, in order to protect the fabrics. If you want carry out a cold wash all the indicators must be off. During the phase in which the water is held in the tub, the relevant indicator light blink to show that the machine is at a standstill. SPIN SELECTION button By pressing this button, it is possible to reduce the maximum speed, and if you wish, the spin cycle can be cancelled. Deselect the option to end the cycle with a spin dry (which may be reduced or cancelled using the appropriate button) and emptying phase. If the label does not indicate specific information, it is possible to use the maximum spin expected in the program. Thanks to electronic control, the water in To prevent damage to the fabrics, it is not possible to increase the speed over the maximum allowed for the programme. the intermediate phases is emptied silently, making this option very useful for washing at night. To reactivate the spin cycle press the This option must be selected before pressing the START/PAUSE button. button until you reach the spin speed you would like to set. It is possible to modify the spin speed without pausing the machine. START SMART TOUCH An over dosing of detergent can cause excessive foaming. If the appliance detects the presence of excessive foam, it may exclude the spinning phase or extend the duration of the program and increase water consumption. Simultaneously pressing the START/PAUSE and OPTIONS buttons allows a previously downloaded cycle to be started whilst the Smart Touch position is selected on the programme knob (for downloading cycles from the App see the relevant section of this user manual). 13 EN NIGHT & DAY button KEY LOCK Pressing simultaneously the buttons TEMPERATURE SELECTION and SPIN SELECTION for about 3 seconds, the machine allows you to lock the keys. In this way, you can avoid making accidental or unwanted changes if a button on the display is pressed accidently during a cycle. The key lock can be simply cancelled by pressing the two buttons simultaneously again or turning off the appliance. Digital Display The display’s indicator system allows you to be constantly informed about the status of the machine. 3 1 2 7 4 10 2) SPIN SPEED This show the spin speed of the selected programme that can be changed or omitted by the relevant button. 3) WASH TEMPERATURE INDICATOR LIGHTS This shows the washing temperature of the selected programme that can be changed (where allowed) by the relevant button. If you want carry out a cold wash all the indicators must be off. 4) CYCLE DURATION When a programme is selected the display automatically shows the cycle duration, which can vary, depending on the options selected. Once the programme has started you will 5 6 be kept informed constantly of the time remaining to the end of the wash. The appliance calculates the time to the end of the selected programme based upon a standard loading, during the cycle, the appliance corrects the time to that applicable to the size and composition of the load. Kg Check °c 9 8 1) DOOR LOCKED INDICATOR LIGHT The indicator light is illuminated when the door is fully closed. Close the door BEFORE selecting the START/PAUSE button. Selecting a different stain level the When START/PAUSE is pressed on the machine with the door closed, the indicator will flash momentarily and then illuminate. If the door is not properly closed, the light will continue to flash for about 7 seconds, after which the start command will be automatically delete. In this case, close the door in the proper way and press the START/PAUSE button. relevant indicator will light up. 6) OPTIONS INDICATOR LIGHTS The indicator lights show the option that can be selected by the relevant button. 7) KEY LOCK INDICATOR LIGHT The indicator light show that the keys are locked. 8) WI-FI (some models only) Wait until the DOOR LOCKED light has gone out before opening the door. 14 5) STAIN LEVEL INDICATORS LIGHTS Once the programme has been selected, the indicator light will automatically show the stain level set for that programme. In the models with the Wi-Fi option, the icon indicates that the Wi-Fi system is working. Through every wash phase "Kg Check" 9) NIGHT & DAY INDICATOR LIGHT allows to monitor information on the wash load in the drum and in the first minutes of the wash it: The indicator light shows the selection of the relevant option. - adjusts the amount of water required; 10) Kg Check (function active only on certain programmes) - determines the length of the wash cycle; During the first minutes of the cycle, the - adjusts the rhythm of drum rotation for the type of fabric being washed; - recognizes the presence of lather, increasing, if necessary, the amount of water during rinsing; - adjusts the spin speed according to the load, thus avoiding any imbalance. 15 EN - controls rinsing according to the type of fabric selected to be washed it; "Kg Check" indicator remain on while the intelligent sensor will weigh the laundry and adjust the cycle time, water and electricity consumption accordingly. Cycles – To download and launch new SMART TOUCH washing programmes. This appliance is equipped with Smart Touch technology that allows you to interact, via the App, with smartphones based on Android operating system and equipped with NFC (Near Field Communication) function. The simply -Fi App is available for devices running both Android and iOS, both for tablets and for smartphones. However, you can interact with the machine and take advantage of the potential offered by Smart Touch only with Android smartphones equipped with NFC technology, according to following functional scheme: Android smartphone with NFC technology Interaction with the machine + contents Android smartphone without NFC technology Contents only Android Tablet Contents only Apple iPhone Contents only Apple iPad Contents only Smart Care – Smart Check-up and AutoClean cycles and a troubleshooting guide. My Statistics – Washing statistics and tips for a more efficient use of your machine. HOW TO USE SMART TOUCH FIRST TIME - Machine registration Enter the "Settings" menu of your Android smartphone and activate the NFC function inside the "Wireless & Networks" menu. Depending on the smartphone model and its Android OS version, the process of the NFC activation may be different. Refer to the smartphone manual for more details. Turn the knob to the Smart Touch position to enable the sensor on the dashboard. Open the App, create the user profile and The management and the control of the machine via App is only possible "by proximity": it is therefore not possible to perform remote operations (e.g.: from another room; outside of the house). register the appliance following the instructions on the phone display or the "Quick Guide" attached on the machine. FUNCTIONS The main functions available using the App are: Voice Assistant – A guide to help you choose the ideal cycle with only three voice inputs (clothes/fabrics, color, stain level). 16 NEXT TIME – Regular usage NOTES: Place your smartphone so that the NFC antenna on its back matches the position of the Smart Touch logo on the appliance (as illustred below). Every time you want to manage the machine through the App, first you have to enable the Smart Touch mode by turning the knob to the Smart Touch indicator. Make sure you have unlocked your phone EN (from stand-by mode) and you have activated the NFC function; following the steps mentioned earlier. If you want to start a washing cycle, load If you do not know the position of your NFC antenna, slightly move the smartphone in a circular motion over the Smart Touch logo until the App confirms the connection. In order for the data transfer to be successful, it is essential TO KEEP THE SMARTPHONE ON THE DASHBOARD DURING THESE FEW SECONDS OF THE PROCEDURE; a message on the device will inform about the correct outcome of the operation and advise you when it is possible to move the smartphone away. the laundry, the detergent and close the door. Select the desired function in the App (e.g.: starting a programme, the Smart Check-up cycle, update statistics, etc). Follow the instructions on the phone display, KEEPING IT ON the Smart Touch logo on the machine dashboard, when requested to do so by the App. Thick cases or metallic stickers on your smartphone could affect or prevent the transmission of data between machine and telephone. If necessary, remove them. The replacement of some components of the smartphone (e.g. back cover, battery, etc...) with non-original ones, could result in the NFC antenna removal, preventing the full use of the App. In order to restart a cycle which has already been downloaded to the Smart Touch position, select it with the programme knob, and then simultaneously press the START/PAUSE and the OPTIONS buttons as indicated on the control panel. 17 Table of programmes 1) (MAX.) * 2 PROGRAMME 1 (see control panel) (MAX.) 2) Perfect 20° 3,5 4 4,5 5,5 6 6,5 7 8 20° 3,5 4 4,5 5,5 6 6,5 7 8 40° 3,5 4 4,5 5,5 6 6,5 7 8 60° 3 3,5 3,5 4 40° 1 1,5 1,5 1,5 1,5 2 30° 30' 1,5 2 2,5 2,5 2,5 2,5 2,5 3 30° 44' 3 3 3,5 3,5 3,5 3,5 3,5 4 40° Coloured 40° 2) Hygiene 60° Perfect Rapid 59 Min. 1,5 2 2,5 3 14' 1 Rapid 3) 1 2 1 Hand/Silk 1 1 1 2 2 2 2 2,5 30° Wool 1 1 1 2 2 2 2 2,5 40° Rinse - - - - - - - - - Drain + Spin - - - - - - - - - Delicates 2 2 2,5 2,5 2,5 2,5 2,5 3 40° 2,5 3 3,5 4 4,5 5 5,5 6 60° ( ) Mixed Cottons** Whites Ultra 29' 2) 2) 2) 5 6 7 8 9 10 11 12 60° ( ) 5 6 7 8 9 10 11 12 90° ( ) 5 6 7 8 9 10 11 12 30° Customizable setting that interacts with the App on your smartphone and to download the cycles (see the dedicated section). The factory sets the default programme Auto-Clean, which will sanitize the machine. 18 ( ) Only with PREWASH option selected (programmes with PREWASH option available). 1) When a programme is selected, on the display is shown the display shows the recommended wash temperature that can be reduced (where allowed) by the relevant button. 2) For the programmes shown you can adjust the duration and intensity of the wash using the STAIN LEVEL button. 3) Selecting the RAPID program on the knob, it will be possible to select with the RAPID button, one of the three rapid programs available among 14’, 30’ and 44’. ** STANDARD COTTON PROGRAMMES ACCORDING TO (EU) No 1015/2010 and No 1061/2010. COTTON PROGRAMME TEMPERATURE OF 60°C. WITH COTTON PROGRAMME TEMPERATURE OF 40°C. WITH A A These programmes are suitable to clean normally soiled cotton laundry and they are the most efficient programmes in terms of combined energy and water consumptions for washing cotton laundry. These programmes have been developed to be compliant with the temperature on the wash label on the garments and the actual water temperature may slightly differ from the declared temperature of the cycle. (Only for models with liquid detergent compartment) When only a limited number of articles have stains which require treatment with liquid bleaching agents, preliminary removal of stain can be carried out in the washing machine. Pour the bleach into the liquid bleach container, inserted into the compartment marked "2" in the detergent drawer, and set the special programme RINSE. When this phase has terminated, turn the programme selector to the OFF position, add the rest of the fabrics and proceed with a normal wash on the most suitable programme. 19 EN Please read these notes: * Maximum load capacity of dry clothes, according to the model used (see control panel). Programmes selection To clean different types of fabrics and various levels of dirt, the washing machine has specific programs to meet every need of washing (see table of programmes). WARNING: IMPORTANT WASH PERFORMANCE ADVICE. New, coloured garments should be Hygiene 60° Thanks to the "Mix Power System +" technology, this program ensures deep cleaning by optimizing the cycle in terms of temperature and rinses, eliminating allergens and detergent residues. Ideal for sensitive skin. Designed for cotton garments, it provides a 60°C temperature and is recommended for a reduced load. washed separately for at least 5 or 6 washes. Certain large dark items such as jeans and towels should always be washed separately. Never mix NON COLOURFAST fabrics. Mix Power System + The washing machine is equipped with an innovative pre-mix of detergent and water. A jet of water under high pressure sprays the mixture directly in the load. In the initial phase of the wash cycle, the high pressure spray facilitate the penetration of the wash solution through the fibres, thoroughly removing dirt ensuring the best wash performance. The system also delivers the "Mix Power System +", during the rinse, the complete removal of the residues of detergent due to its high pressure water jet, which invests the laundry. Perfect 20° This innovative "Mix Power System +" technology, allows you to wash fabrics such as cottons, synthetics and mixed fabrics at 20°C with a performance which is comparable to a 40°C wash. The consumption of this programme is about 50% of a conventional 40°C. Cottons wash. We suggest a wash load equal to 2/3 of the maximum capacity of the machine. 20 Coloured 40° This programme allows you to wash different type’s fabrics and different colours all together. The rotation movement of the drum and the water levels are optimized, both during the washing the rinsing phase. The accurate spin action, ensures a reduced formation of creases in the fabrics. Thanks to "Mix Power System +" technology, a complete washing cycle optimization is possible. Perfect Rapid 59 Min. This specially designed programme maintains the high quality wash performance whilst greatly reducing the wash time. The programme is designed for a reduced load (see table of programmes). Rapid (14/30/44 Min.) Washing cycle suggested for low loads and slightly dirty. With this program it is recommended to reduce the quantity of detergent normally used, in order to avoid unnecessary waste. Selecting the RAPID program and acting on the button you can choose one of three programs available. Hand/Silk This programme allows a delicate washing cycle for garments specified as "Hand Wash only" and laundry items made from Silk or specified as "Wash as Silk" on the fabric label. Wool This program performs a wash cycle dedicated to the wool fabrics that can be washed in a washing machine, or the articles to be washed by hand. Rinse This program performs 3 rinses with an intermediate spin (which can be reduced or excluded by using the appropriate button) . It is used for rinsing any type of fabric, for example after a wash carried out by hand. Whites Made to have a perfect washing. The final spin at maximum speed gives more efficient removal. Drain + Spin The program completes the drain and a maximum spin. It is possible to delete or reduce the spin with the SPIN SPEED button. Delicates This program has reduced periods of drum rotation during the cycle and is particularly suitable or washing delicate fabrics. The wash cycle and rinses are carried out with a high level of water to ensure the best performance. Mixed The washing and rinsing optimise the speed and rhythm of the drum action and water levels. The gentle spin, ensures a reduced formation of creases in the fabric. Cottons This program is suitable to clean normally soiled cotton laundry and it is the most efficient program in terms of combined energy and water consumptions for washing cotton laundry. 21 Smart Touch Customizable setting of the knob that you have to select when you would like to transfer a command from the App to the machine and to download/start a cycle (see the dedicated section and the user manual of the App for more info). In the Smart Touch option the factory sets as a default the "Auto-Clean" cycle, made to clean the drum, remove bad smells and extend the life of the washing machine. Make sure there is no load in the drum before starting the "Auto-Clean" cycle, use a proprietary washing machine cleaning agent or powder detergent. Leave the door of the machine open at the end of the cycle to allow the drum to dry. Recommended every 50 washes. EN Ultra 29’ This program, particularly suitable for lightly dirty garments, has been designed for a full load wash in just 29 minutes. 7. THROUBLESHOOTING AND WARRANTY If you believe the washing machine is not working correctly, consult the quick guide provided below which includes some practical tips on how to fix the most common problems. FOR SMART TOUCH MODELS The simply-Fi app has a Smart Check-up function that allows you to confirm the functionality and status of the product at any time. To use the simply -Fi app you will need an Android smartphone with NFC technology. More info can be found on the App. If the display of the machine is showing an error (by a code or blinking LEDs), you should turn on the App on your Android smartphone, with NFC on. Place your smart phone against the Smart Touch logo on the control panel. You should now be able to read the fault directory to solve the issue. ERROR CODE FORMAT Models with a display: the error is shown by a number preceded by the letter “E” (example: E2 = Error 2). Models without display: an error is shown by a sequence of flashes of every LED. The error code is shown by the number of flashes followed by a pause of 5 seconds (example: two flashes – pause 5 seconds – two flashes – repeating = Error 2). Error shown E2 (with display) 2 flashes of the LEDs (without display) Possible causes and practical solutions The machine cannot load water. Make sure the water supply tap is open. Make sure the water supply hose isn’t bent, kinked or trapped. Make sure the drain pipe is at the proper height (see installation section). E3 (with display) 3 flashes of the LEDs (without display) E4 (with display) 4 flashes of the LEDs (without display) E7 (with display) 7 flashes of the LEDs (without display) Any other code Close the water supply tap, unscrew the filler hose from the back of the washing machine and make sure the “anti-sand” filter is clean and not blocked. The washing machine does not drain water. Make sure the filter is not clogged. Make sure the drain hose isn’t bent, kinked or trapped. Make sure the home drainage system is not blocked and is allowing water to flow through without obstruction. Try to drain the water in the sink. There is too much foam and/or water. Ensure the correct amount of detergent is being used and the detergent is designed for use in a washing machine. Door problem. Make sure the door is correctly closed. Make sure the clothes inside the drum are not preventing the door from closing fully. If the door is locked, turn off and unplug the washing machine from the electrical supply socket, wait 2-3 minutes and reopen the door. Turn off and unplug the washing machine, wait a minute. Turn on the machine and restart a program. If the error occurs again contact an Authorised Customer Service Centre directly. 22 Problem Possible causes and practical solutions The washing machine does not work / start The washing machine does not spin Make sure the product is plugged into a working supply socket. Make sure power is on. Make sure the wall socket is working, testing it with another appliance such as a lamp. The door may not be correctly closed: open and close it again. Check whether the required program was correctly selected and the start button pressed. Make sure the washing machine is not in pause or time delay mode. This may be due to a leak from the seal between the tap, supply hose and fill valve; in this case, replace it and tighten the hose connections correctly. Make sure the front filter is correctly closed. The machine is fitted with a detection system that protects the load and product from damage if the load is not balanced before spinning. This may result in:• The machine attempts to balance the load, increasing the time of spin. • Reduction of the speed of spin to decrease vibrations and noise. • The spin cycle aborting to protect the machine and load. If this is experienced remove the load de-tangle it, reload it and restart the spin program. This could be due to the fact that water has not been completely drained: wait a few minutes. If the problem persists, see Error 3 section. Some models include a "no spin" function: make sure it is not selected. Check which options are selected and their effect on the spin cycle. Strong vibrations / noises are heard during the spin cycle Excessive detergent can impede the spin cycle, ensure the correct amount of detergent is being used. The washing machine may not be fully levelled: if necessary, adjust the feet as indicated in the specific section. Make sure transport screws, rubber bungs and spacer tubes were removed. Make sure there are no foreign objects inside the drum (coins, hinges, buttons, etc). Water leaked on the floor near the washing machine The standard manufacturer warranty covers faults caused by electrical or mechanical faults in the product due to an act or omission of the manufacturer. If a fault is found to be caused by factors outside the product supplied, miss-use or as a result of the instructions on use not being followed, a charge may be applied. 23 EN OTHER ANOMALIES The use of ecological detergents without phosphates may cause the following effects: Warranty The product is guaranteed under the terms and conditions stated on the certificate included with the product. The certificate has to be stored so as to be shown to the Authorized Customer Service Centre in case of need. You can also check the warranty conditions on our web site. To obtain assistance, please fill in the form on-line or contact us at the number indicated on the support page of our web site. - cloudier rinse drain water: This effect is tied to the suspended zeolites which do not have negative effects on rinse efficiency. - white powder (zeolites) on laundry at the end of the wash: this is normal, the powder is not absorbed by fabric and does not change its colour. To remove the zeolites, select a rinse programme. In the future consider using slightly less detergent. - foam in the water at last rinse: this does not necessary indicate poor rinsing. Consider using less detergent in future washes. - abundant foam: This is often due to the anionic surfactants found in the detergents which are hard to eliminate from laundry. In this case, do not re-rinse to eliminate these effects: it will not help at all. We suggest conducting a maintenance wash using a proprietary cleaner. If the problem persists or if you suspect a malfunction, immediately contact an Authorised Customer Service Centre. It is always recommended to use original spare parts, that are available at our Authorised Customer Service Centres. By placing the mark on this product, we are confirming compliance to all relevant European safety, health and environmental requirements which are applicable in legislation for this product. The manufacturer declines all responsibility for any printing errors in the booklet included with this product. Moreover, it also reserves the right to make any changes deemed useful to its products without changing their essential characteristics. 24
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project