WASHING MACHINE HOOVER HTC 9 AA H V G S p p C1 C2 C3 C4 B A PROGRAMME/TEMPERATURE SELECTOR B SPIN SPEED SELECTOR C1 PRE-WASH C2 EASY IRON C3 SUPER FAST C4 EXTRA RINSE G DOOR LOCK LAMP H START/STOP KEY p CONTROL POSITION INDICATOR S STOP/END OF CYCLE LAMP V TIME REMAINING LAMPS P R A Table of programmes mod. HTC 9 AA MIXED /SYNTH. COTTONS programme programme for SPECIF. PROGR. DELICAT. Máx. load kg Washing powder load I II • • • • • • • • • • • • • • • • • • • • cottons whites 160 90º 900 5,5 cottons * fast coloureds 150 * 60º 900 5,5 cottons fast coloureds 90 40º 900 5,5 cottons delicate coloureds 90 30º 900 5,5 cottons delicate coloureds 90 15º 900 5,5 2,0 mixed/synthetics fast coloureds 90 60º 800 mixed/synthetics fast coloureds 85 50º 800 2,0 mixed/synthetics delicate coloureds 85 40º 800 2,0 mixed/synthetics delicate coloureds 80 30º 800 2,0 15º 800 2,0 mixed/synthetics delicate coloureds 80 spin 9 900 rinse 25 800 empty 4 delicates 70 40 400 1,5 woollens 30º woolmark woollens 50 30 800 1,0 woollens 15º woolmark woollens 50 15 800 1,0 50 30 800 2,0 2,0 delicates 40º hand wash 30º SPECIAL aprox. Máx. Máx. time temp. spin min. setting speed ºC sport 30º 150 30 800 AA 40 40º 160 40 800 2,0 express 44 44 40 800 3,5 express 29 30 40 800 2,0 • • • • • • • • • • • • • • • • • • Option keys C P R • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • * Programme as per EN 60456 Technical data mod. HTC 9 AA Mains voltage 230 V. / 50 Hz. Wash power rating Spin power rating Pump motor power rating Heating element power rating Max. power input Mains fuse amp. rating 175 W. 340 W. 30 W. 1950 W. 2200 W. 10 A. LY OF FI CI AL EN DE D BY RE CO MM FOR YOUR NEW WASHING MACHINE Water Energy consumption consumption Water * prog. * prog. pressure EN 60456 EN 60456 0,05-0,8 Mpa 54 L. 1,04 Kw/h. Get the best results from your new Hoover machine To ensure you get the best results from your new Hoover machine it is important to use the right detergent in your everyday wash. There are many detergents available in the market and making a choice from the wide range available can often be confusing. At Hoover we regularly test many different types of detergent to assess which give the best wash results in our machines. We found only one brand always lives up to our exacting standards and provides outstanding cleaning across a broad range of dirt and stains, as well as providing high levels of fabric care. That´s why Hoover gave Ariel their official seal of approval. PREPARING THE WASH CYCLE 1.- Once the washing is loaded, ensure that the drum doors are properly closed. 2.- Add detergent and additives, not exceeding the maximum level indicator. • detergent for pre-wash I • detergent for wash programme II • bleach • fabric conditioner SELECTING THE DESIRED PROGRAMMES AND OPTIONS 3.- Turn the programme selector (A) to the desired programme. 4.- Press the key or keys for any options desired (C1, C2, C3, C4). C1: pre-wash key This is useful for heavily soiled washing. This adds a short additional wash before the main wash. The key can be activated only in Cottons, Mixed and Synthetics programmes. To activate this option, always press the key before pressing the start key (H). C2 easy iron key This function helps reduce creasing, depending on the programme selected and the type of fabric washed. This works as follows: Synthetics. Intermediate spins during rinses are eliminated. Delicates. Intermediate spins during rinses are eliminated and the machine stops before the final spin, which is a gentle spin. Woollens. Intermediate spins during rinses are eliminated and the machine stops before the final spin. Hand wash. The machine stops before the final spin. Rinses. Intermediate spins during rinses are eliminated To complete the wash cycle in the Delicates and Woollens programmes, press the Easy Iron key again: the machine will empty and perfor m the required spin. To empty machine of water with no spin, cancel the ongoing programme and select the Empty programme. C 3 super fast key When this key is engaged programme times are cut by as much as 50 minutes, depending on the wash programme and temperature selected. The key can be activated only in Cottons, Synthetics and Mixed programmes. C4 extra rinse key The electronic system engaged by this key activates a new special rinse cycle. More water and a combination of drum rotation movements ensure that washing is perfectly rinsed. The key can be activated in Cottons, Mixed, Synthetics, Delicates, Rinse, Woollens, Sportswear and AA40 programmes. 5.- Select spin speed if required (B) B spin selector Use this control to select the maximum spin speed within the range for the model of washing machine in question and the programme selected (see programme table). The control can be turned in both directions. Spin speed may be selected at any time during the programme. 6.- Once you have selected the desired options, press the START key (H). The washing machine will start up and one of the time remaining lamps (V) will come on. This lamp indicates approximately how much time is left before the wash programme is completed: it will change as the programme progresses. Make sure that the stop/end of cycle lamp is flashing before pressing the start key (H). If it remains on continuously, turn the programme selector to OFF and re-set it to the desired programme. To cancel an option after setting, just press the option key again (the indicator lamp will go out). To change or cancel a programme once the programme selected has started, proceed as follows: - Hold down the start key (H) until the stop/end of cycle lamp is burning steadily. The programme has been cancelled, and another may be selected. - Select the new programme. - Press the start key (H) again until one of the Time Remaining lamps lights up. - The machine will then run the new programme selected. Programme Pause To pause the wash programme so that more washing can be added, proceed as follows: - Hold down the start key (H) until the option key lamps begin to flash and the Time Remaining lamp lights up. - When the Door Lock lamp goes out (after approx. 2 minutes, or 5 minutes if the machine is equipped with the STOP & LOAD function), open the door and put the additional washing into the drum. - Close the drum door and the lid properly. - Press the start key (H), the Time Remaining lamp will light up and the machine will continue with the programme. When the programme is completed the Stop/End of cycle lamp (S) will come on and the Time Remaining and Door Lock lamps (V and G) will go out. 07-04 / 46001669 / EN For your own safety, set the programme selector to OFF before opening the washingmachine lid and the drum doors to remove the washing.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021