Hoover | DYSM 70142D-S | Hoover DYSM 70142D-S User manual

Hoover DYSM 70142D-S User manual
WASHING MACHINE DYSM 70142D
H
B2
G
B1
V
A
C2
A
C1
p
PROGRAMME SELECTOR
Use this control to select the desired wash programme. Turn the selector (it
can be turned in both directions) so that the programme is opposite the
reference indicator (p). The temperature selected will depend on the
programme. (See the Programme Table).
B1 SPIN SPEED SELECTOR
B2
DELAY START
C1
COLD WASH
C2 AQUAPLUS (SENSITIVE KEY)
G
DOOR LIGHT
H
START/PAUSE KEY
V
“DIGITAL” Display
The display’s indicator system allows you to be constantly informed about the status of
the machine
p
CONTROL POSITION INDICATOR
“Slow Motion Technology” is an innovative braking system enabling the washing machine to be loaded
safely and easily. Thanks to the two buffers at each end, the drum can be opened in 2 seconds by
lightly pressing the central key.
This washing machine has a device that ensures that the drum is right-side-up and ready for loading/
unloading clothes when the selected programme is completed
Programme table mod DYSM 70142D
programme
COTTONS
MIXED
SYNTHETICS
DELICATES
SPECIAL
programme for
aprox.
time
min.
max.
temp.
setting
ºC
spin
speed
rpm/min
max.
load
Kg.
washing powder option keys
load
C
I
II

Fast coloureds with prewash
display
90º
1400
7




* Fast coloureds
display
60º
1400
7




* Fast coloureds
display
40º
1400
7




Delicate coloureds
display
30º
1400
7




Fast coloureds
display
50º
1000
3




Delicate coloureds
display
40º
1000
3




Delicate coloureds
display
30º
1000
3




Woollens
display
30º
800
1



Hand wash
display
40º
800
1



Gentle rinse
display
1000
Gentle spin
display
1400
Empty
ActivEco 20ºC
display
20º
1000
7



Fast 44
display
40º
1000
3



Fast 30
display
30º
1000
2



display


0

* Cotton wash programme requirements according to (EU) 1015/2010 e nº 1061/2010 regulations
60°C Cotton wash programme
40°C Cotton wash programme
These wash programmes are recommended for soiled cotton fabrics and are the most effective in terms of both
energy efficiency and water consumption.
These programmes have been designed to comply with the recommended wash temperatures specified on the
labelling: the specified temperature may differ slightly from that indicated on the wash cycle.
Recommendations on the use of detergent at various temperatures.
When washing heavily soiled whites, we recommend using cotton programs of 60°C or above and a normal
washing powder (heavy duty) that contains bleaching agents that at medium/high temperatures provide
excellent results.
For washes between 40°C and 60°C the type of detergent used needs to be appropriate for the type of fabric
and level of soiling.
Normal powders are suitable for “white” or colour fast fabrics with high soiling, while liquid detergents or “colour
protecting” powders are suitable for coloured fabrics with light levels of soiling.
For washing at temperatures below 40°C we recommend the use of liquid detergents or detergents specifically
labeled as suitable for low temperature washing.
For washing wool or silk, only use detergents specifically formulated for these fabrics.
For dosage amounts please follow the instructions on the detergent package label.
Remaining
Programme
load
time
spin.
Energy cons.
Water cons.
moisture
44%
7 kg / 3,5 kg 230min. /140min
1,20kWh /0,93kWh
52l /35 l
Cotton 60°C
1400Rpm
44%
3,5 kg
130min.
0,71kWh
35l
Cotton 40°C
50%
3 kg
105min.
1000Rpm
0,49kWh
64l
Synthetics 40ºC
40%
1 kg
45min.
800Rpm
0,28kWh
50l
Woollens 30ºC
Power consumption of the off-mode and of the left-on mode: 0,4 W / 0,6 W
IMPORTANT:
- Do not use liquid detergent for programs with a prewash cycle and/or timed start.
AQUAPROTECT – PROTECTED INCOMING WATER PIPE
The main inlet pipe is contained within a protective transparent hose.
In the event of damage occurring to the main inlet pipe any water leakage is retained within
the transparent hose.
If water has leaked from the main inlet pipe there will be a visible sign within the transparent
hose.
You may continue to complete the programme cycle but for safety we recommend the
immediate replacement of the complete hose assembly.
If the hose is not long enough for correct connection, it must be replaced with a longer one.
The hose can be obtained from a Service Centre.
PREPARING THE WASH CYCLE
1.- Once the washing is loaded, ensure that the drum doors are properly closed..
2.- Add detergent and additives, not exceeding the maximum level indicator.

detergent for pre-wash I

detergent for wash programme II

fabric conditioner
SELECTING THE DESIRED PROGRAMMES AND OPTIONS
3.- Turn the programme selector (A) to the desired programme.
4.- Press the key or keys for any options desired (C1, C2,).
.- It is advisable to select the required options before pressing the Programme Start key (H).
.- Remember that if the programme has already passed the stage at which an option is activated, that option
will not be implemented.
C1 cold wash key
By pressing this button it is possible to transform every programme into a cold washing one, without modify
other characteristics (water level, times, rythmes, etc..).
Curtains, small carpets, man made delicate fabrics, non coulor fast garments can be safely washed thanks to
this new device.
C2 aquaplus (sensitive key)
Thanks to the new SENSOR ACTIVA SYSTEM, by pressing the key it is possible to run a special washing cycle
applicable to all programs and types of fabric, caring for their fibres and the delicate skin of the users who use
them.
Taking on much more water, together with the new combined action of drum rotation cycles and taking on and
discharging water allow you to obtain perfectly clean, rinsed clothes. More water is used in the wash to dissolve
the detergent completely, ensuring an effective washing action. The water in the rinses has also been increased
to eliminate all trace of detergent in the fibres.
This function has been specifically studied for people with delicate, sensitive skin, who can suffer irritation or
allergy from the slightest detergent residue.
It is also advisable to use this function for children's clothes and delicate fabrics in general, especially for
washing bathrobes, whose fibres tend to retain detergent.
This option is not available for the wool program.
5.- Select spin speed if required (B1)
B1 spin speed
Once the programme has been selected, the maximum spin speed allowed for that programme appears on the
display. Pressing the spin button will reduce the speed by 100 rpm each time the button is pressed.The
minimum speed allowed is 400 rpm, or it is possible to omit the spin by pressing the spin button repeatedly.
6.- To start the programme, once options have been chosen, press the key H. The washing machine will begin
to operate. If you wish to cancel the option you have selected, press the key again. (The pilot light will go off.)
B2 delay start button
This button allows you to pre-programme the wash cycle to delay the start of the cycle for up to 24 hours.
To delay the start use the following procedure:
Set the required programme.
Press the button once to activate it (h00 appears on the display) and then press it again to set a 1 hour delay
(h01 appears on the display); the pre-set delay increases by 1 hour each time the button is pressed, until h24
appears on the display, at which point pressing the button again will reset the delay start to zero.
Confirm by pressing the “START/PAUSE” button (the light on the display starts to flash). The countdown will
begin and when it has finished the programme will start automatically.
It is possible to cancel the delay start by taking the following action:
Press and hold the button for 5 seconds until the display will show the settings for the programme selected.
At this stage it is possible to start the programme previously selected by pressing the “START/PAUSE” button
or to cancel the process by setting the selector to the OFF
position and then selecting another programme.
cycle duration (V)
When a programme is selected the display automatically shows the cycle duration, which can vary, depending
on the options selected.
Once the programme has started you will be kept informed constantly of the time remaining to the end of the
wash.
door light (G)
Once the START/PAUSE button has been pressed the light first flashes then stops flashing and remains on
until the end of the wash.
2 minutes after the end of the wash the light goes off to show that the door can now be opened.
Cancel-change programs
Once you have started a program, and wish to change or cancel it, you should proceed in the following manner,
- Put the program selector in the OFF position. At that instant, you have cancelled the program and can if
you wish to do so, select a new one.
- Select the new program.
- Click the key (H) again.
The washing machine will perform the new selected program.
Programme pause
It is possible to momentarily stop the wash programme so that more washing can be added, and to do so,
proceed as follows:
- Hold down the (H) key until the option key lamps begin to flash and the time remaining indicator display, and
pilot lamp lights up.
- When the Door Lock lamp goes out (after approx. 2 minutes), open the door and add the desired washing.
- Correctly close the doors of the drum and the outer cover.
- Press the key H, and the washing machine will continue with the programme.
When the programme has been completed, the message "END" will appear in the indicator display,
Wait until the Door Lock lamp (G) goes out (after approx. 2 minutes)
“To remove the washing, set the programme selector to the OFF position”, before
opening the washing-machine lid and the drum doors.
19.05.14 / H-46007795 EN
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising