Hoover | VCN6185A | Hoover VCN6185A User manual

Hoover VCN6185A User manual
ELECTRONIC COMBINED FROST FREE
EN
COMBINED FROST FREE
CONTROL PANEL
Open the top door of the fridge in order to access the control panel.
SWITCHING THE PRODUCT ON AND OFF
The product is electronically powered by connecting the power cable to the power outlet and remains powered on until cable is removed.
When " - " is displayed on the digital controls, it indicates that the product is in stand-by mode, therefore it is connected to the power outlet but it is
not working. To switch the appliance on, press the MODE button. To turn the product to standby mode, press the MODE button for a few seconds.
When the product is in standby mode, any food in your fridge or freezer will not be cooled.
(Figure 1)
Once the plug has been connected, the product will show the recommended temperature for the fridge compartment on the display +5°C. For the
freezer compartment, the product will automatically switch to the recommended temperature of -18°C.
SETTING THE TEMPERATURE OF THE FRIDGE COMPARTMENT
It is possible to modify the temperature by pressing the buttons (+) and (-). The maximum temperature is 7, and the minimum is 1. The manufacturer's
recommended temperature is 5.
When the temperature of the fridge compartment is being set, the word FRIDGE flashes.
SETTING THE TEMPERATURE OF THE FREEZER COMPARTMENT
It is possible to switch from Fridge to Freezer mode by pressing the MODE button. The word FREEZER will now be displayed. Subsequently, the
recommended temperature -18 will be displayed. It is possible to modify the temperature from -16°C to -22°C.
(Figure 2)
To modify the temperature, press the buttons (+) and (-) until you reach the desired temperature.
22EN
IT
FREEZING
SUPER
/ SUPER
OPTION
OPTION
The SUPER option can be selected for fast freezing food items. Ideal to use when a large amount of food has been added to your
freezer.
(Figure 3)
Off
On
Press the (+) button in order to activate the SUPER function. After 36 hours the product will automatically leave the SUPER function, if you
wish to interrupt the SUPER function at anytime press the (-) button. For optimum usage the manufacturer recommends that the super freeze
function is activated a few hours before putting the selected food items in the freezer. The rating plate states the maximum quantity of foods
that can be frozen, (see figure 6).
FAULTS
SUPER
AND
OPTION
ERRORS
Every error or fault that occurs will be automatically shown on the display which will indicate a number followed by the letter "E" (Error). If this
occurs switch the product off and back on again, if the error persists, please contact for technical assistance.
(figure 4)
In the event of a power failure the message "PF" (Power Fail) will be shown on the display once power is returned to the machine. In case of a
power cut lasting 10-12 hours, check that the food items have remained unchanged. Any food that has been fully or partially defrosted needs to
be consumed within 24 hours and NOT refrozen.
(figure 5)
(figure 6)
Make sure the water outlet is always clean. Make sure foods do not touch the back or sides
of the fridge compartment.
The freezer compartment does not require defrosting because this product is equipped
with an automatic system that prevents the formation of ice (frost free).
N.B. This is the rating plate. If you need to contact our Service Department in
the event of faults. Please remember to give them the information on the plate.
3 EN
Z STUDIO > 08-2007 – Cod. 41026511
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising