Baumatic BWC6046FS User manual

BWC3019FS
BWC3832FS
BWC6046FS
BWC6038FS
Wine
Cabinet
EN Ver.1/2016
BWC3019FS
BWC3832FS
BWC6046FS
BWC6038FS
30cm 19Bottles
60cm 46Bottles
38cm 32Bottles
60cm 38Bottles
--CONTENTS-01 SAFETY INFORMATION
03 SCRAPPING OLD APPLIANCES
03
03
04
Conformity
Energy Saving
Service
04
05
06
06
Product Features
Control Panel
Interior Light
The Wine Cabinet Shelves
07
07
07
08
08
08
09
10
10
11
11
13
14
Before Switching On
During First Use
Turning The Appliance On And Off
Unlocking The Control Panel
The Interior Light
Setting The Temperature Range
Setting The Temperature
Changing Between Fahrenheit And Celsius
Silent Mode
Function Indicator
Loading The Wine Cabinet
Storing Your Wines
Wine Storage Problems
17
17
18
18
18
18
Removing The Shelves For Cleaning
Defrosting
Moving Your Wine Cabinet
Power Failure
Vacation Time
Disconnecting From Power
19
20
21
24
24
25
Electrical Connection
Positioning
Built-In Installation
Adjusting the height and leveling off your wine cabinet
Installing The Handle
Reversing The Door Of Your Wine Cooler
04 DESCRIPTION OF APPLIANCE
07 USING YOUR WINE CABINET
16 CLEANING AND MAINTENANCE
19 INSTALLATION
30 TROUBLESHOOTING
32 TECHNICAL DATA
Thank you for purchasing this product.
Before using your Wine Cabinets, please carefully read this instruction
manual in order to maximize its performance. Store all documentation
for subsequent use or for other owners. This product is intended solely for
household use or similar applications such as:
--the kitchen area for personnel in shops, offices and other working
environments
--on farms, by clientele of hotels, motels and other environments of a
residential type
--at bed and breakfasts (B & B)
--for catering services and similar applications not for retail sale.
This appliance must be used only for purposes of storage of wine, beer and
soft drinks, any other use is considered dangerous and the manufacturer will
not be responsible for any omissions. Also, it is recommended that you take
note of the warranty conditions.
SAFETY INFORMATION
The Wine Cabinets contains a refrigerant gas (R600a: isobutane) and
insulating gas (cyclopentane), with high compatibility with the environment,
that are, however, inflammable.
We recommend that you follow the following regulations so as to avoid
situations dangerous to you:
Before performing any operation, unplug the power cord from the power
socket.
● The refrigeration system positioned behind and inside the Wine Cabinets
contains refrigerant. Therefore, avoid damaging the tubes.
● If in the refrigeration system a leak is noted, do not touch the wall outlet
and do not use open flames. Open the window and let air into the room.
Then call a service centre to ask for repair.
● Do not scrape with a knife or sharp object to remove frost or ice that
occurs. With these, the refrigerant circuit can be damaged, the spill from
which can cause a fire or damage your eyes.
● Do not install the appliance in humid, oily or dusty places, nor expose it
to direct sunlight and to water.
● Do not install the appliance near heaters or inflammable materials.
● Do not use extension cords or adapters.
● Do not excessively pull or fold the power cord or touch the plug with wet
hands.
.01.
● Do not damage the plug and/or the power cord; this could cause electrical
shocks or fires.
● It is recommended to keep the plug clean, any excessive dust residues on
the plug can be the cause fire.
● Do not use mechanical devices or other equipment to hasten the defrosting
process.
● Absolutely avoid the use of open flame or electrical equipment, such as
heaters, steam cleaners, candles, oil lamps and the like in order to speed
up the defrosting phase.
● Do not use or store inflammable sprays, such as spray paint, near the
Wine Cabinets. It could cause an explosion or fire.
● Do not use electrical appliances inside the wine storage compartments,
unless they are of the type recommended by the manufacturer.
● Do not place or store inflammable and highly volatile materials such
as ether, petrol, LPG, propane gas, aerosol spray cans, adhesives, pure
alcohol, etc. These materials may cause an explosion.
● Do not store medicine or research materials in the Wine Cabinets. When
the material that requires a strict control of storage temperatures is to
be stored, it is possible that it will deteriorate or an uncontrolled reaction
may occur that can cause risks.
● Maintain the ventilation openings in the appliance enclosure or in the
built-in structure, free of obstruction.
● Do not place objects and/or containers filled with water on the top of the
appliance.
● Do not perform repairs on this Wine Cabinets. All interventions must be
performed solely by qualified personnel.
● This appliance can be used by children aged from 8 years and above
and by persons with reduced physical, sensory or mental capabilities or
with a lack of experience and knowledge; provided that they have been
given adequate supervision or instruction concerning how to use the
appliance in a safe way and understand the hazards involved.
● Children should not play with the appliance. Cleaning and user
maintenance should not be made by children without supervision
.02.
SCRAPPING OLD APPLIANCES
This appliance is marked according to the European directive 2012/19/EU
on Waste Electrical and Electronic Equipment (WEEE).
WEEE contains both polluting substances (which can cause negative
consequences for the environment) and basic components (which can
be re-used). It is important to have WEEE subjected to specific treatments,
in order to remove and dispose properly all pollutants, and recover and
recycle all materials.
Individuals can play an important role in ensuring that WEEE does not
become an environmental issue; it is essential to follow some basic rules:
--WEEE should not be treated as household waste;
--WEEE should be handed over to the relevant collection points managed
by the municipality or by registered companies. In many countries, for
large WEEE, home collection could be present.
In many countries, when you buy a new appliance, the old one may be
returned to the retailer who has to collect it free of charge on a one-to-one
basis, as long as the equipment is of equivalent type and has the same
functions as the supplied equipment.
Conformity
By placing the
mark on this product, we are confirming
compliance to all relevant European safety, health and environmental
requirements which are applicable in legislation for this product.
Energy Saving
--Always ensure good ventilation. Do not cover ventilation opening or grille.
--Always keep fan louvers clear.
--Do not place appliance in areas of direct sunlight or close to a stove,
heather or similar object.
--Open or keep the doors open as little as possible
--Remove dust present on the rear of the appliance
.03.
Service
● You should not attempt to repair the appliance
yourself, as this could cause injury or a more serious
malfunction. If you require a service call then please
contact the Customer Care Department
DESCRIPTION OF APPLIANCE
Product Features
BWC3019FS: Single Zone--19 Bottles
A
A. Control Panel
B. Glass Door
B
C. Handle
C
D. Beech Shelves
D
E. Front Vent
F. Adjustable Foot
E
F
BWC3832FS: Single Zone--32 Bottles
A
A. Control Panel
B. Glass Door
B
C. Handle
C
D. Beech Shelves
E. Front Vent
D
F. Adjustable Foot
E
F
.04.
BWC6046FS: Dual Zone--46 Bottles
A
A. Glass Door
B. Control Panel
C. Handle
B
D. Beech Shelves
E. Front Vent
C
D
F. Adjustable Foot
E
F
BWC6038FS: Dual Zone--38 Bottles
A2
A1
A1. Control Panel (Left）
B
A2. Control Panel (Right）
B. Glass Door
C
C. Handle
D. Beech Shelves
D
E. Front Vent
F. Adjustable Foot
E
F
Control Panel
Single Zone:BWC3019FS, BWC3832FS, BWC6038FS(Left & Right)
A
A. Power
F. Lock / Unlock
B
C
D
E
G
H
F
B. Lighting
C. Display Window D. Temp. Plus E. Temp.Minus
G. Function Indicator H. ºC/ºF Switch
*BWC6038FS is without Function Indicator
.05.
Dual Zone：BWC6046FS
B
A
A. Power
E
C
B. Lock / Unlock
D
C. Lighting
I
G
J
H
F
D. ºC/ºF
Switch
Lower Zone
Function
Temp.
F. Function
Indicator 1 G. Display Window H. Indicator 2 I.
Plus
K
Zone
E. Upper
Display Window
J. Temp.Minus
K. Zone Select
Interior Light
Note: The LED light has a long life span. Once it is broken, it is mandatory
to call aftersales center to get a new one.
A replacement made by unqualified people without supervision from
electrical engineer would result in electrical shock and injury.
o The cooling zone has an interior light. The light can be switched on and
off by using the light button.
The Wine Cabinet Shelves
o To prevent damaging the door gasket, make sure the door is fully open
when pulling shelves out of the rail compartment.
o For easy access to the bottles stored, pull the shelves out approximately
1/3 of the way.
o For a model without telescopic rails, 2 plastic Stoppers of each shelf are
on the left and right side of the interior cabinet to prevent the shelf from
falling out.
A. Stopper
A
A
.06.
USING YOUR WINE CABINET
Before Switching On
o Make sure that it has been installed by a suitably qualified person, as per
the information contained in the installation instructions.
o After delivery, wait for eight hours before connecting the appliance to
your mains supply. This will allow any refrigerant gasses that may have
been disturbed during the transportation process to settle.
o The outside of the appliance and the removable accessories contained
within it, should be cleaned with a solution of liquid detergent and water.
o The interior of the appliance should be cleaned with a
solution of sodium bicarbonate dissolved in lukewarm
water. The interior and accessories should be thoroughly
dried, after the cleaning process has been completed.
o There can be an odour when you first switch on the
appliance. It will lessen as the appliance starts to cool.
During First Use
IMPORTANT: When you use the Wine Cabinet for the first time or restart the
appliance after it has been turned off for a long time, there could be a
few degrees variance between the temperature you select and the one
indicated on the LED display. This is normal and it is due to the length of
activation time. Once the Wine Cabinet has been running for a few hours
everything will be back to normal.
o When you first switch on the appliance, the compressor will run
continuously until the Wine Cabinet reaches a cool enough temperature.
o During this period of time, you should try not to open the door frequently
or place bottles inside of the appliance.
o If the unit is switched off or unplugged, you must allow at least 5 minutes
before restarting the appliance or reconnecting it to your mains supply.
Turning The Appliance On And Off
BWC3019FS, BWC3832FS, BWC6046FS, BWC6038FS
o When the Wine Cooler is connected to the power outlet it will turn on
automatically.
o Press and hold the power button for 10 seconds to turn the
appliance on and off.
.07.
o Even if the safety lock is activated, the appliance can still be turned off
by pressing and holding the power button for 10 seconds.
* For BWC6038FS, the power of Left and Right Zone will be turn off/on at the
same time no matter the operation above on Left or Right Zone.
Unlocking The Control Panel
BWC3019FS, BWC3832FS, BWC6046FS, BWC6038FS
o To unlock the control panel, press the power and light buttons
simultaneously for 3 seconds. A beep will sound to indicate that
the control panel has unlocked.
o The control panel will automatically lock after 10 seconds if no buttons
are pressed. A beep will sound to indicate that the control panel has
locked.
o When the control panel is locked, no buttons can be operated except
for the power button to turn the appliance off.
The Interior Light
BWC3019FS, BWC3832FS, BWC6046FS, BWC6038FS
o When the control panel is unlocked, you can use the light
button to switch the interior light on and off.
o The light will remain on unless it is turned off manually by
pressing the light button.
Setting The Temperature Range
BWC3019FS, BWC3832FS
o The appliance is with 4 temperature ranges for option, the ranges list of
each model is as below.
o To change temperature range, when the control panel is
locked, press the temperature minus button for 3 seconds, the
display window will flash "E"--"F"--"H"--"L" in loop with a sound of
beep by every pressing.
o Leave the display window flashing for 3 seconds, a beep will sound to
indicate that the setting is confirmed.
o The default range of Single Zone is E: 5-22 ºC (41-72 ºF).
Display
E (Default)
F
H
L
Temp. Range (Single Zone)
5 - 22 °C (41ºF-72ºF)
2 - 20 °C (36ºF-68ºF)
10 - 19 °C (50ºF-66ºF)
0 - 20 °C (36ºF-68ºF)
.08.
BWC6046FS
o The default range of Dual Zone is E: 5-12 ºC (41-54 ºF) for the upper zone and
12-22 ºC (54-72 ºF) for the lower zone
Display
Temp.Range (Dual Zone)
Upper Zone
Lower Zone
E (Default)
5 - 12 °C (41ºF-54ºF)
12 - 22 °C (54ºF-72ºF)
F
2 - 12 °C (36ºF-54ºF)
12 - 20 °C (54ºF-68ºF)
H
5 - 12°C (41ºF-54ºF)
8 - 19 °C (46ºF-66ºF)
L
2 - 10 °C (36ºF-50ºF)
12 - 22 °C (54ºF-72ºF)
BWC6038FS
o The defualt temperature setting range is E: 5-22 ºC (41-72 ºF) for Left Zone,
F:2 - 22 °C(36ºF-72ºF) for Right Zone.
Setting The Temperature
BWC3019FS, BWC3832FS, BWC6038FS
o Use the temperature plus button and minus button to select the
temperature you want the Wine Coolers to operate at.
o Each press of the temperature plus button will increase the set
temperature by 1°C/1°F.
o Each press of the temperature minus button will decrease the
set temperature by 1°C/1°F.
o The first touch of these buttons will automatically set the previous set
temperature.
o When the display shows the desired temperature, release all buttons and
the display will change to show the actual temperature inside of the
cabinet after about 10 seconds.
BWC6046FS
o Use the zone selection button to choose which zone you want
to set the temperature for. The relevant LED display will flash to
show you can set the temperature for that zone.
o Use the temperature plus and minus buttons to select the temperature
you want the wine cabinet to operate at.
.09.
o The first touch of these buttons will automatically set the
previous set temperature.
o Each press of the temperature plus button will increase the set
temperature by 1°C/1°F. Each press of the temperature minus
button will decrease the set temperature by 1°C/1°F.
o When the display shows the desired temperature release all buttons and
the display will change to show the actual temperature inside of the
cabinet after about 10 seconds.
Changing Between Fahrenheit And Celsius
o You can select whether the temperature display shows Celsius or
Fahrenheit.
BWC3019FS, BWC3832FS, BWC6038FS
o To alter what the temperature display is showing, press the
Celsius and Fahrenheit switch. This will change the temperature
display for both cooling zones.
* For BWC6038FS, the Celsius and Fahrenheit of Left and Right Zone will be
changed at the same time no matter the operation above on Left or
Right Zone.
BWC6046FS
o To alter what the temperature display is showing, press the
Celsius and Fahrenheit switch. This will change the temperature
display for both cooling zones
Silent Mode
BWC3019FS, BWC3832FS, BWC6046FS
o The appliance is with Silent Mode, which will slow down the fans speed
when the inside temperature reaches the temperature set.
o The Silent Mode is set as "On" by default, to turn off it, when the
control panel is under locked condition, press and hold the light
mark for 3 seconds, the icon ºC or ºF will stay on to indicate the
Silent Model is off.
o To turn on Silent Mode again, when the control panel is under
locked condition, press and hold the light mark for 3 seconds,
the icon ºC or ºF will flash every 2 seconds continuously to
indicate the Silent Model is working.
.10.
Function Indicator
BWC3019FS, BWC3832FS
o When the compressor starts to work, the Indicator will stay
on;
o In other conditions, the Indicator will be off.
Function
Indicator
BWC6046FS
Function
Indicator 1
o The Indicator 1 will flash every 2 seconds when
the unit is plugged in;
o The Indicator 1 will stay on when the compressor
starts to work;
o The Indicator 2 will flash every 3 seconds when
the heating function of lower zone starts to work;
o The Indicator 2 will stay on when the cooling
Function
Indicator 2 function of lower zone starts to work.
Loading The Wine Cabinet
IMPORTANT: Your appliance is ideally suited to store 0.75
litre Bordeaux style wine bottles. You must make sure
that they do not prevent the door from shutting
properly.
o Always check that you can close the door without it fouling on a wine
bottle, before shutting it.
o When loading several bottles of wine at once, it will take longer for the
appliance to cool the individual bottles.
o As many bottles may differ in size and dimensions, the actual number of
bottles you are able to store may vary. The maximum storage number is
based on standard 0.75 litre Bordeaux style wine bottles.
.11.
BWC3019FS
Upper Shelf
Bottom Shelf
750ml Bordeau
Φ76.20mm
305mm
BWC3832FS
5
5
5
Upper Shelf
Bottom Shelf
5
5
750ml Bordeau
5
Φ76.20mm
4
305mm
BWC6046FS
8
8
Upper Shelf
Bottom Shelf
8
8
750ml Bordeau
8
Φ76.20mm
6
305mm
.12.
BWC6038FS
3
3
3
3
3
3
3
3
3
3
4
4
Bottom Shelf
Upper Shelf
750ml Bordeau
Φ76.20mm
305mm
Storing Your Wines
The chart below indicates the ideal storage temperatures for different
types of wine:
Type of wine
Temperature
(Celsius)
Temperature
(Fahrenheit)
Red wine (*)
15.5 – 18.5°C
59.9 – 65.3°F
White wine (**)
10 - 15°C
50 – 59°F
Sparkling wines/
Champagne
7.2 – 9.5°C
45 – 49.1°F
Rose wine
9.5 – 10.5°C
49.1 – 50.9°F
Vintage wine
13°C
55°F
* Light red wines, such as Beaujolais, Pinot Noir and Cabernet Franc benefit
from being served slightly cooler than full-bodied reds.
** Chardonnay is often served too cold. You should chill it at a warmer
temperature inside of your Wine Cabinet. Or leave it to warm slightly
when you remove it from your Wine Cabinet.
o Temperature stability is the most important factor when it comes to
storing wine.
o Exposure to light, vibrations or fluctuations in temperature and humidity
can all cause wine to spoil. When properly stored, wines not only
maintain their quality but many will actually improve in aroma, flavour
and complexity as they mature.
o Wines kept at a higher temperature will age faster. Wine that is exposed
to temperatures that are greater than 21°C (70°F) will suffer from poorer
flavour and aroma.
o If wine is kept at too low a temperature, this can result in the
development of harmful deposits. A humidity of 70% is ideal for keeping
.13.
corks from shrinking.
o After a bottle of wine has been opened, the wine comes into contact
with air. So it is best to store the remainder of the bottle upright, to
minimize the surface area of the wine that is coming into contact with
the air.
o Once opened, wine will remain in a drinkable condition for two days for
delicate whites or three days for rich reds, as long as the bottle as been
resealed. You should make sure that the seal is firm by checking the
stopper.
o Special stoppers that keep wine sparkling and Champagne bubbling for
one or two days after opening, can be bought at most good wine shops.
o When stored correctly, white wines can keep well for up to two years. Full
bodied reds will age well for ten years and dessert wines will age well for
up to twenty years.
o When you buy a bottle of wine, you should transfer it to a suitable
storage location immediately (if you are not going to store it in your Wine
Cabinet).
o Cheaper bottles of wine will not age as well as more expensive ones.
o To make the most of the bouquet and taste of your wine, never fill more
than half a glass at a time. It will also help if the shape of your wine glass
is appropriate for your wine. The size and shape of your wine glass’s bowl
will determine the intensity and complexity of the bouquet. The stem
should be long enough to allow you to avoid hand contact with the
bowl of the glass and should be tulip-shaped or tapered at the top.
Wine Storage Problems
Corking- a tiny percentage of bottled wine (about 1%) will suffer from this.
The cork reacts with the wine and gives it a musty, unpleasant taste. It is the
most common wine storage problem and is caused by harmless bacteria
growing on the cork. As unfortunate as this is, there is nothing to do but to
discard all of the wine in the affected bottle. This is not to be confused with
small fragments of cork floating in the wine itself, which will not impair the
flavour.
Oxidisation- when wine has been opened and left for longer than a day;
it tends to lose its aroma and colour, giving an overall flat taste. The only
way to avoid this, it to either drink the wine on the same day it was opened
or to use a vacuum device specially designed for removing oxygen from
opened wine bottles. If you use such a device, the wine should still be
consumed shortly afterwards.
Ullage- this is loss of wine from the bottle by evaporation or leakage. Signs
of ullage include wine seeping around the cork, a protruding cork or a
stained label. It can happen if the bottle has been allowed to get too
.14.
warm. The wine may still be drinkable, if the leakage was recent; however,
you should be aware that if the wine cools down again, contraction
can cause more air to be sucked into the bottle and result in further
deterioration.
Slight effervescence in still wine- this isn’t really a problem with the way
the wine has been stored, but as a result of incomplete malolactic
fermentation before the wine was bottled. A good way to get rid of the
effervescence is to let the wine breathe. Alternatively you can use a bottle
vacuum device, after about five minutes the effervescence will vanish.
Sediment- this is not normally a problem, however both red and white
wines can produce sediment after a number of months in a bottle. The
sediment consists of tartrate crystals and is totally harmless. If anything the
building of sediment can be considered a good sign because it means
that the wine was not subjected to much (if any) filtering, meaning that the
flavours and aromas should be preserved better.
A good way to get around sediment (if it is a problem) is to stand the
bottle upright, the day before opening, so that the sediment can settle to
the bottom of the bottle.
You can also decant your wine; decanting will “open up” the flavour of
both young and old wines, but younger wines in particular. To decant,
pour the wine slowly and evenly into your decanter.
.15.
CLEANING AND MAINTENANCE
WARNING: PLEASE ENSURE THAT YOUR
APPLIANCE IS DISCONNECTED FROM
YOUR MAINS SUPPLY BEFORE
ATTEMPTING TO CLEAN IT.
o Do not clean the appliance by pouring water onto it
or spraying water over it.
o The interior of the Wine Cabinet should be cleaned
periodically, using a solution of bicarbonate of soda
and lukewarm water.
o Clean the accessories separately with soap and
water. Do not clean them in a dishwasher.
o Do not use abrasive products, detergents or soaps.
.16.
o After washing the appliance, wipe over the area that you have cleaned
with a damp cloth and then dry it thoroughly.
o When cleaning is complete, dry your hands and then reconnect the plug
to your mains supply.
Removing The Shelves For Cleaning
o Before removing a Shelf from the appliance, it is necessary to remove all
the bottles on the Shelf.
o Move the shelf to the position where the notch of the wooden shelf is
directly under the plastic stopper and lift the wooden shelf. Please ensure
these are replaced when the shelf is put back.
o Make sure the shelves are fully engaged before loading any bottle into
the cabinet. Pull the shelves out all the way to the STOPPER position and
push them back in several times to make sure the shelves are properly
engaged.
A. Notch
B. Plastic Stopper
A
B
Defrosting
o Defrosting occurs automatically inside of the Wine Cabinet during
operation. The defrost water is collected by the evaporating tray and
evaporates automatically.
o The evaporating tray and defrost water drain hole should be cleaned
periodically. This will prevent water from collecting in the bottom of the
Wine Cabinet, instead of flowing down the defrost drainage channel
and drain hole.
o You can also pour a small amount of water down the drain hole to clean
inside of it.
o You should be careful to make sure that wine bottles do not touch the
.17.
rear wall of the appliance, as this can interrupt the automatic defrosting
process and deflect water into the base of your Wine Cabinet.
Moving Your Wine Cabinet
If you need to move your Wine Cabinet to another location you should
follow the steps outlined below.
o Remove all items from the Wine Cabinet.
o Securely tape down all loose items such as the shelves inside of the
appliance.
o Turn the adjustable foot up to the base to avoid damage.
o Tape the door closed.
o Ensure the appliance stays secure in the upright position during
transportation. Also protect the outside of the appliance with a blanket
or similar item.
Power Failure
o If power is cut to the appliance, for a few hours it will be able to maintain
the temperature inside the cabinet. Providing that the number of times
that the door is opened is kept to a minimum.
o If the power cut is for longer than a few hours, then you will need to store
the contents in an alternate location to prevent them being affected by
temperature rise.
IMPORTANT: If the appliance is unplugged, the power is lost or turned off
you must wait 5 minutes before restarting the Wine Cabinet. If you attempt
to restart before this time delay, the compressor could be damaged.
Vacation Time
Short vacations: Leave the Wine Cabinet in operation for holidays of less
than 3 weeks.
Long vacations:
o If your appliance is not going to be in use for a period of time, you should
remove the bottles of wine and switch off the appliance
o The interior should be cleaned with a solution of bicarbonate of soda
and lukewarm water.
o The interior should then be thoroughly dried.
o To prevent mould growth, the door should be left slightly ajar.
Disconnecting From Power
o If the unit is unplugged, or there is a power cut, you must wait for 5
minutes before restarting. Attempting to restart the Wine Cabinet before
5 minutes has elapsed, may cause it not to function.
.18.
INSTALLATION
MPORTANT: Before installation and usage read all the instructions and
make sure that the voltage (V) and the frequency (Hz) indicated on the
rating plate are exactly the same as the voltage and frequency in your
home. The rating plate can be found on the front left edge of the inside of
the Wine Cabinet.
The manufacturer declines all responsibility in the event of the installer
failing to observe all the accident prevention regulations in force, which
are necessary for normal use and the regular operation of the electric
system.
Electrical Connection
YOUR Wine Cabinet IS INTENDED FOR FITTED AND
PERMANENT INSTALLATION.
We recommend that the appliance is connected by a
qualified electrician, who is a member of the N.I.C.E.I.C.
and who will comply with the I.E.E. and local regulations.
o Your wine cabinet comes supplied with a 13 amp plug fitted. If in future you need to
change the fuse in this plug, then a 13 amp ASTA approved (BS 1362) fuse must be
used.
o The wiring in the mains lead is coloured as follows:
Brown.............................Live
Blue................................Neutral
Green and yellow.........Earth
Earth
(Green and Yellow)
Neutral
(Blue)
Live
(Brown)
o As the colours of the wires in the appliance’s mains lead may not correspond with
the coloured markings identifying the terminals in your spur box, please proceed as
follows:
The brown wire must be connected to the terminal marked “L” (live), or
coloured red.
The blue wire must be connected to the terminal marked “N” (neutral), or
coloured black.
The green and yellow wire must be connected to the terminal marked “E”
(earth), or by the earth symbol, or coloured green and yellow.
o When the connection is completed, no stray strands or cut wire should be present.
The cord clamp must be secured over the outer sheath.
.19.
Positioning
o It is advisable that your appliance is only installed in a location where
the ambient temperature of the room, corresponds with the climate
classification that is stated on the rating plate of your appliance. Your
appliance may not function correctly if the ambient temperature falls
outside of the following ranges.
Climate classification
Appropriate ambient temperature
SN
10 - 32 °C (50ºF-90ºF)
N
16 - 32 °C (61ºF-90ºF)
ST
16 - 38 °C (61ºF-100ºF)
T
16 - 43 °C (61ºF-109ºF)
o Positioning the appliance requires two people in order to avoid injuries or
damage to the appliance.
o Your appliance should not be located in direct sunlight or exposed to
continuous heat or extremes of temperature (e.g. next to a radiator or
boiler). If this is not feasible, then you should install an insulation plate
between the appliance and the adjacent heat source.
o You should check whether there is an electrical socket available, which
will be accessible after your appliance is installed.
o Place the appliance flatly and firmly on a solid base.
o Anything positioned above the appliance must be at least 10 cm away
to allow sufficient cooling of the condenser. You must allow a 5 cm gap
to the rear and either side of the appliance.
o Be sure to leave enough space for the opening of the door, to avoid
damage to the appliance or personal injury.
.20.
Built-In Installation
BWC3019FS
•Height Adjustable:
863-883mm
BWC3832FS
•Height Adjustable:
853-873mm
380
>853
>57
0
570
853
840
≥385
.21.
100
BWC6046FS
•Height Adjustable:
863-883mm
BWC6038FS
•Height Adjustable:
863-883mm
o Your Wine Cabinet can be used as a freestanding or a built in unit. The
clearances shown in the above drawing should be followed for both
types of installation.
o In particular, the depth dimension must be observed.
.22.
IMPORTANT: The vent at the base of the appliance is for ventilation. Nothing
should be placed in front of this vent; otherwise your Wine Cooler may not
operate properly.
o A decorative plinth can be fitted to the front of the base vent as long as
the cut out shown in the diagram below is made in the plinth. This cut out
is required whether the vent is removed or not.
BWC3019FS
A. Cut-out Area
BWC3832FS
A. Cut-out Area
54mm
283mm
BWC6046FS
A. Cut-out Area
491mm
BWC6038FS
A. Cut-out Area
491mm
.23.
Adjusting the height and leveling off your wine cabinet
o The appliance is equipped with adjustable feet, so that the height may
be adjusted to level the cabinet on uneven floor surfaces.
o We recommend that two people carry out this procedure.
o The height must be adjusted prior to building the appliance into the
housing unit and it should be set at such a height that the top panel of
the appliance fits exactly below the kitchen worktop.
o Tilt the appliance approximately 60° to allow access
to the adjustable feet.
o Take care to ensure the cabinet is supported at all
times.
o Twist the foot into a suitable position to level the
cabinet.
o Repeat these steps for the other adjustable feet.
IMPORTANT: If the appliance is not level, then the door and door seal may
be affected.
IMPORTANT: Do not move the appliance when the feet are adjusted high.
Installing The Handle
Gasket
Handle
Washer
Handle
Screws
o Remove the door Gasket slightly to
expose the two screw holes.
oFix the Handle by screwing the two
Handle Screws tightly, the Handle
Screws with Washers are pre-installed
inside the screw holes, pls.do not
unscrew the Handle Screws too much
in case the Washers fell off.
o Replace the Gasket.
.24.
Reversing The Door Of Your Wine Cooler
This appliance has the capability of the door opening from
either the left or right hand side.
Any parts that you remove from the appliance whilst reversing
the door, should be retained for later use.
BWC3019FS,BWC3832FS, BWC6046FS
o Open the glass door and remove
the two screws from Pivot Hinge
under the right bottom corner of the
glass door.
Pivot Hinge
Screws
o Be careful to support the glass
door with both hands to prevent it
dropping after removing the screws.
Right Lower Hinge
o Pull down to remove the glass door
and place it on a padded surface to
prevent scratching it.
Pivot Hinge
.25.
o Remove the right top hinge and right lower hinge.
Right Top Hinge
Right Lower Hinge
o Pull out the 6 Plastic Caps at the front left corner of the cabinet. And
move them all to the right side.
Plastic Caps
.26.
o Take the left top hinge and left lower hinge from the plastic bag that
contained this manual then install them in the designated positions on
the left side of the cabinet.
Left Top Hinge
Left Lower Hinge
o Turn the glass door around 180° and reinstall it.
.27.
o Insert the Pivot Hinge into the Left Lower Hinge hole of the door.
o Install the door to the left hinge side by tightening the Support Rod with
the 2 screws.
Pivot Hinge
Screws
IMPORTANT: Check that the door opens and shuts correctly, without fouling,
after you have completed the door reversal process.
After the door has been reversed, you should check the door seal of the
Wine Coolers. The seal should not be creased or crushed; otherwise there
will be a gap between it and the inside of the door.
o The seal must adhere properly all the way around the door.
o If the seal is not adhering to the cabinet properly, then you should either:-
.28.
a) Use a warm damp cloth and manipulate the seal until it does adhere to
the cabinet properly, all the way around the door.
or
b) Use a hair dryer on its lowest heat setting and lightly heat the areas of
the door seal that are not adhering correctly. The heat will make the
seal more pliable and this will allow you to manipulate the seal into the
correct position.
IMPORTANT: DO NOT HEAT THE DOOR SEAL ON ANYTHING BUT THE LOWEST
HEAT SETTING, OR HEAT THE SEAL FOR A LONG PERIOD OF TIME. OTHERWISE
DAMAGE MAY BE CAUSED TO THE DOOR SEAL, WHICH WOULD NOT BE
RECTIFIED UNDER THE GUARANTEE FREE OF CHARGE.
IMPORTANT: WHEN YOU HAVE REVERSED THE DOOR OF THE APPLIANCE, IF
YOU HAVE PLACED THE APPLIANCE ON ITS BACK, YOU MUST WAIT FOR 8
HOURS BEFORE SWITCHING THE APPLIANCE BACK ON.
.29.
TROUBLESHOOTING
IMPORTANT: If your Wine Cabinet appears not to be operating properly,
before contacting the Customer Care Department, please refer to the
checklist below.
No.
PROBLEM
POSSIBLE CAUSE
The Wine Cabinet does not operate
Not plugged in.
The appliance is turned off.
The circuit breaker tripped or a blown fuse.
The Wine Cabinet is not cold enough
Check the temperature control setting.
External environment may require a higher setting.
The door is opened too frequently.
The door is not closed completely.
The door gasket does not seal properly.
3
Automatically turn-on and
turn-off frequently
The room temperature is hotter than normal.
A large amount of contents has been added to the Wine
Cabinet.
The door is opened too frequently.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
4
The lighting does not work
Not plugged in.
The circuit breaker tripped or a blown fuse.
The lighting is turned off.
5
Too much vibration
Check to assure that the appliance is level.
Check to assure no parts inside the cabinet or in the
compressor chamber are loose.
6
The Wine Cabinet seems to make
too much noise
The rattling noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds caused
by the flow of refrigerant.
Contraction and expansion of the inside walls may cause
popping and crackling noises.
The appliance is not level.
7
The door will not close properly.
The Wine Cabinet is not level.
The door was reversed and not properly installed.
The gasket is dirty.
The shelves are out of position.
8
The display window is shown with “HH”
or “LL” instead of a digital figure,
and/or with continuous beep sound.
The temperature probe is out of order.
1
2
.30.
DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF.
Please note that if an engineer is asked to attend whilst the product is under guarantee
and finds that the problem is not the result of an appliance fault, then you may be liable
for the cost of the call out charge.
The appliance must be accessible for the engineer to perform any
necessary repair. If your appliance is installed in such a way that an
engineer is concerned that damage will be caused to the appliance or
your kitchen, then he will not complete a repair.
This includes situations where appliances have been tiled in, sealed in
with sealant, have wooden obstructions placed in front of the appliance,
like plinths. Or any installation other than the one specified has been
completed.
Please refer to the conditions of guarantee that appear on the warranty card that you
receive with the appliance.
IMPORTANT: A policy of continuous improvement and reserves the right to
adjust and modify its products without prior notification.
.31.
TECHNICAL DATA
Manufacturer
HOOVER
Product Category
2 – Refrigeration-cellar, Cellar and Wine storage
appliances
Model Number
BWC3019FS
BWC3832FS BWC6046FS
BWC6038FS
Energy Efficiency
Class (1)
B
B
C
D
Annual Energy
Consumption (2)
169kWh
188kWh
252kWh
288kWh
Storage Volume of
Fridge Compartment
57
88
135
116
Storage Volume of
N/A
Freezer Compartment
N/A
N/A
N/A
Star Rating
N/A
N/A
N/A
N/A
Coldest Storage
Temperature
5°C
5°C
5°C(Upper Zone)
12°C(Lower Zone) 5°C
Frost Free
Compartments
N/A
N/A
N/A
N/A
Temperature
Rise Time
N/A
N/A
N/A
N/A
Freezing Capacity
N/A
N/A
N/A
N/A
Climate Class (3)
N
N
N
N
Noise Level
39dB
39dB
39dB
39dB
Installation Type
Built-in
Built-in
Built-in
Built-in
(1) On a scale from A+++ (highest efficiency) to G (lowest efficiency).
(2) Annual energy consumption based on standard test results for 24 hours.
The actual energy consumption will depend on how the appliance is used
and where it is located.
(3) This appliance is intended to be used at an ambient temperature
between “16°C” (lowest temperature) and “32°C” (highest temperature).
.32.
Code: 34002153
Model: BWC3019FS
WINE COOLER
Climate Type:
N
Capacity:
58L
CANDY HOOVER GROUP
Via Comolli,16-20861 Brugherio-Italy
CIRCUIT DIAGRAM
Rated Volt./Freq.: 220-240V 50Hz
Rated Current:
0.50A
Light Power:
Max 0.5W
Refrigerant:
R600a(19g)
Blowing Gas:
Cyclopentane
Unit Size(mm):
295*570*863
N.W.(Kg):
29
CM:COMPRESSOR
TK:OVERLOAD PROTECTOR JK:PTC STARTING RELAY
Made In China
SN:
Code: 34002155
Model: BWC3832FS
WINE COOLER
Climate Type:
N
Capacity:
88L
CANDY HOOVER GROUP
Via Comolli,16-20861 Brugherio-Italy
CIRCUIT DIAGRAM
Rated Volt./Freq.: 220-240V 50Hz
Rated Current:
0.65A
Light Power:
Max 0.5W
Refrigerant:
R600a(17g)
Blowing Gas:
Cyclopentane
Unit Size(mm):
380*570*853
N.W.(Kg):
35.4
CM:COMPRESSOR
TK:OVERLOAD PROTECTOR JK:PTC STARTING RELAY
SN:
.33.
Made In China
Code: 34002154
Model: BWC6046FS
WINE COOLER
Climate Type:
N
Capacity:
145L
CANDY HOOVER GROUP
Via Comolli,16-20861 Brugherio-Italy
CIRCUIT DIAGRAM
Rated Volt./Freq.: 220-240V 50Hz
Rated Current:
0.55A
Light Power:
Max 0.5W
Refrigerant:
R600a(29g)
Blowing Gas:
Cyclopentane
Unit Size(mm):
595*570*863
N.W.(Kg):
48.4
CM:COMPRESSOR
TK:OVERLOAD PROTECTOR JK:PTC STARTING RELAY
Made In China
SN:
Code: 34002156
Model: BWC6038FS
WINE COOLER
Climate Type:
N
Capacity:
116L
CANDY HOOVER GROUP
Via Comolli,16-20861 Brugherio-Italy
CIRCUIT DIAGRAM
Rated Volt./Freq.: 220-240V 50Hz
Rated Current:
0.65A
Light Power:
Max 0.5Wx2
Refrigerant:
R600a(24g)
Blowing Gas:
Cyclopentane
Unit Size(mm):
595*570*863
N.W.(Kg):
48
CM:COMPRESSOR
Y.V.:SOLENOID VALVE
SN:
.34.
JK:PTC STARTING RELAY
TK:OVERLOAD PROTECTOR
Made In China
Customer Care Telephone
0844 692 3605
Spare Part Telephone
0844 692 3606
.35.
Part of the Candy Hoover Group
Via Comolli,16-20861 Brugherio, Italy
www.baumatic.co.uk
.36.
">