WASHING MACHINE CANDY CTA 85 B S V C1 C2 C3 C4 H G A p A PROGRAMME/TEMPERATURE SELECTOR B SPIN SPEED SELECTOR C1 HEAVY WASH C2 EASY IRON C3 EXTRA RINSE C4 SUPER FAST G DOOR LOCK LAMP H START/PAUSE KEY S STOP/END OF CYCLE LAMP V TIME REMAINING OR PROGRAMME PHASE LAMPS p CONTROL POSITION INDICATOR Table of programmes mod. CTA 85 aprox. time min. Máx. temp. setting ºC Máx. spin speed Máx. load kg whites 140 90º 850 5 fast coloureds with prewasch 160 60º 850 5 *fast coloureds 135 60º 850 5 fast coloureds 105 40º 850 5 delicate coloureds 100 30º 850 5 delicate coloureds 95 15º 850 5 fast coloureds with prewasch 100 60º 800 2 fast coloureds 85 60º 800 2 delicate coloureds 75 50º 800 2 delicate coloureds 70 40º 800 2 delicate coloureds 70 30º 800 2 delicate coloureds 65 15º 800 2 delicates 50 40º 400 1,5 woolmark woollens 50 30º 800 1 woolmark woollens 50 15º 800 1 hand wash 50 30º 800 2 rinse 25 800 spin 9 800 SPECIFIC PROGRAMMES DELICATES SYNTHETICS COTTONS programme programme for I • • II • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Option keys C fast key easy iron extra rinse super fast • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 empty MIX & WASH Washing powder load simplissimo fast 32 min. 170 40º 800 5 32 40º 800 2 • • • • * Programme as per EN 60456 Technical data mod. CTA 85 Mains voltage 230 V. / 50 Hz. Wash power rating Spin power rating 175 W. 340 W. Pump motor power rating 30 W. Heating element power rating 1950 W. Max. power input 2200 W. Mains fuse amp. rating Water pressure 10 A. 0,05-0,8 Mpa Water Energy consumption consumption * prog. * prog. EN 60456 EN 60456 48 L. 0,85 Kw/h. PREPARING THE WASH CYCLE 1.- Once the washing is loaded, ensure that the drum doors are properly closed. 2.- Add detergent and additives, not exceeding the maximum level indicator. • detergent for pre-wash I • detergent for wash programme II • bleach • fabric conditioner SELECTING THE DESIRED PROGRAMMES AND OPTIONS 3.- Turn the programme selector (A) to the desired programme. 4.- Press the key or keys for any options desired (C1, C2, C3, C4). C1 heavy wash key This key maintains the water at the selected temperature throughout the wash cycle, and tumbles the washing more strongly, thus giving optimum wash results for heavily soiled garments. It can be activated only in the Cottons programme. C2 easy iron key This function helps reduce creasing, depending on the programme selected and the type of fabric washed. This works as follows: Mixed,Synthetics. Intermediate spins during rinses are eliminated, the final spin is a gentle spin. Delicates. Intermediate spins during rinses are eliminated and the machine stops before the final spin, which is a gentle spin. Hand wash, Woollens ,Cotton, and Mix&wash. The machine stops before the final spin. Rinses. Intermediate spins during rinses are eliminated, the final spin is a gentle spin. To complete the wash cycle in the Delicates , Hand wash , Mix&wash, Cotton, and Woollens programmes, press the Easy Iron key again: the machine will empty and perform the required spin. To empty machine of water with no spin, cancel the ongoing programme and select the Empty programme. C3 extra rinse key The electronic system engaged by this key activates a new special rinse cycle. More water and a combination of drum rotation movements ensure that washing is perfectly rinsed. The key can be activated in Cottons, Mixed, Synthetics, Delicates, Rinse and Mix&wash programmes. C4 super fast key When this key is engaged programme times are cut by as much as 50 minutes, depending on the wash programme and temperature selected. The key can be activated only in Cottons, Synthetics and Mixed programmes. 5.- Select spin speed if required (B) B spin selector Use this control to select the maximum spin speed within the range for the model of washing machine in question and the programme selected (see programme table). The control can be turned in both directions. Spin speed may be selected at any time during the programme. 6.- Once you have selected the desired options, press the START key (H). The washing machine will start up and one of the time remaining or programme phase lamps (V) will come on. This lamp indicates approximately how much time is left before the wash programme is completed (or wash cycle phase): it will change as the programme progresses. Make sure that the stop/end of cycle lamp is flashing before pressing the start key (H). If it remains on continuously, turn the programme selector to OFF and re-set it to the desired programme. To cancel an option after setting, just press the option key again (the indicator lamp will go out). To change or cancel a programme once the programme selected has started, proceed as follows: - Hold down the start key (H) until the stop/end of cycle lamp is burning steadily. The programme has been cancelled, and another may be selected. - Select the new programme. - Press the start key (H) again until one of the time remaining or programme phase lamps lights up. - The machine will then run the new programme selected. Programme Pause To pause the wash programme so that more washing can be added, proceed as follows: - Hold down the start key (H) until the option key lamps begin to flash and the time remaining or programme phase lamp lights up. - When the Door Lock lamp goes out (after approx. 2 minutes), open the door and put the additional washing into the drum. - Close the drum door and the lid properly. - Press the start key (H), the time remaining or programme phase lamp will light up and the machine will continue with the programme. When the programme is completed the Stop/End of cycle lamp (S) will come on and the time remaining or programme phase and Door Lock lamps (V and G) will go out. 07-04 / 46001780 EN For your own safety, set the programme selector to OFF before opening the washingmachine lid and the drum doors to remove the washing.