Candy | RO1696DWHC7/ | Candy RO1696DWHC7/ User manual

Candy RO1696DWHC7/ User manual
EN
Thank-you for choosing a Candy washing
machine. We are confident it will loyally
assist you in safely washing your clothes,
even delicates, day after day.
Environmental conditions
This appliance is marked according to
the European directive 2012/19/EU
on Waste Electrical and Electronic
Equipment (WEEE).
WEEE contains both polluting substances (which
can cause negative consequences for the
environment) and basic components (which can
be re-used). It is important to have WEEE
subjected to specific treatments, in order to
remove and dispose properly all pollutants, and
recover and recycle all materials. Individuals can
play an important role in ensuring that WEEE
does not become an environmental issue; it is
essential to follow some basic rules:
Carefully read this manual for correct and
safe appliance use and for helpful tips on
efficient maintenance.
Only use the washing machine after
carefully reading these instructions. We
recommend you always keep this manual on
hand and in good condition for any future
owners.
l WEEE should not be treated as household
waste;
Please check that the appliance is delivered
with this instruction manual, warranty
certificate, service centre address and
energy efficiency label. Also check that
plugs, drain hose support hook and liquid
detergent or bleach tray (only on some
models) are included. We recommend you
keep all these components.
l WEEE should be handed over to the relevant
collection points managed by the municipality or
by registered companies. In many countries, for
large WEEE, home collection could be present.
In many countries, when you buy a new
appliance, the old one may be returned to the
retailer who has to collect it free of charge on a
one-to-one basis, as long as the equipment is of
equivalent type and has the same functions as
the supplied equipment.
FOR U.K. ONLY
On receipt of your appliance please
check it carefully for damage. Any
damage found must be reported
to the delivery driver immediately.
Alternatively damage found must be
reported to the retailer within 2 days of
receipt.
Contents
1. GENERAL SAFETY RULES
2. INSTALLATION
3. DETERGENT DRAWER
4. PRACTICAL HINTS
Each product is identified by a unique 16character code, also called the “serial
number”, printed on the sticker. This can be
found inside the door opening. This code is
a unique code for your product that you will
need to register the product warranty, or if
you need to contact the Customer Service
Centre.
5. CLEANING AND MAINTENANCE
6. REMOTE CONTROL (WI-FI)
7. QUICK USER GUIDE
8. CONTROLS AND PROGRAMS
9. TROUBLESHOOTING AND WARRANTY
2
l This
appliance is intended to
be used in household and
similar applications such as:
- Staff kitchen areas in shops, offices
and other working environments;
- Farm houses;
- By clients in hotels, motels and
other residential type environments;
- Bed and breakfast type environments.
A different use of this appliance
from household environment
or from typical housekeeping
functions, as commercial use by
expert or trained users, is excluded
even in the above applications. If
the appliance is used in a manner
inconsistent with this it may reduce
the life of the appliance and may
void the manufacturer’s warranty.
Any damage to the appliance or
other damage or loss arising l Water pressure must be between
0.05 MPa and 0.8 MPa.
through use that is not consistent
with domestic or household use l Make sure carpets or rugs do
(even if located in a domestic or
not obstruct the base or any of
household environment) shall not
the ventilation openings.
be accepted by the manufacturer to
l After installation, the appliance
the fullest extent permitted by law.
must be positioned so that the
l This appliance can be used by
plug is accessible.
children aged from 8 years and
l The maximum load capacity of
above and persons with reduced
dry clothes depends on the
physical, sensory or mental
model used (see control panel).
capabilities or lack of experience
and knowledge if they have been l To consult the product technical
specification please refer to the
given supervision or instruction
manufacturer website.
concerning use of the appliance
3
EN
in a safe way and understand the
hazards involved.
Children shall not play with the
appliance. Cleaning and user
maintenance shall not be made
by children without supervision.
l Children should be supervised
to ensure that they do not play
with the appliance.
l Children of less than 3 years
should be kept away unless
continuously supervised.
l If the supply cord is damaged, it
must be replaced by a special
cord or assembly available from
the manufacturer or its service
agent.
l Only
use
the
hose-sets
supplied with the appliance for
the water supply connection
(do not reuse old hose-sets).
1. GENERAL SAFETY
RULES
Electrical connections
safety instructions
l Do
not expose the washing
machine to rain, direct sunlight
or other weather elements.
Protect from possible freezing.
and
l The
technical details (supply
voltage and power input) are
indicated on the product rating l When moving, do not lift the
washing machine by the knobs
plate
or detergent drawer; during
l Make sure that the electrical
transport, never rest the door on
system is earthed, complies
the trolley. We recommend two
with all applicable law and that
people lift the washing machine.
the (electricity) socket is
compatible with the plug of the l In the event of fault and/or
appliance. Otherwise, seek
malfunction, turn off the
qualified professional assistance.
washing machine, close the
water tap and do not tamper
l The use of converters, multiple
with the appliance.
sockets or extension cords is
Immediately
contact
the
strongly advised against
Customer Service Centre and
only use original spare parts.
l Before cleaning or maintaining
Failure to observe these
the washing machine, unplug
instruction may jeopardise
the appliance and turn off the
appliance safety.
water tap.
l Do
not pull on the power cord
or appliance to unplug the
machine.
l Make
sure there is no water in
the drum before opening the
door.
WARNING:
water may reach very high
temperatures during the
wash cycle.
4
l Remove
the 2 or 4 transportation
screws (A) on the back and
remove the 2 or 4 flat washers,
rubber bungs and plastic spacer
tubes (B) as illustrated in figure 1.
l If the washing machine is built-in,
unscrew the 3 or 4 transportation
screws (A) and remove the 3 or 4
flat washers, rubber bungs and
plastic spacer tubes (B).
l During the removal of the screws
occasionally spacer tubes fall
inside the product, these can be
remove by tilting the product forward
and recovering them from the floor or
inside the base of the machine.
l Cover the open transportation screw
holes with the 2 or 4 plastic caps
included in the instruction bag.
EN
2. INSTALLATION
1
A
B
A
B
B
B
A
A
2
A
1
WARNING:
2
3
keep packaging materials
away from children.
l Place
the corrugated plastic sheet,
found on top of the appliance during
the unpacking process, into the base
of the appliance as shown in figure 2
(according to the model, consider
version A, B or C).
B
In some models this operation
will not be necessary, because
the corrugated plastic sheet
will be already placed on the
bottom of the appliance.
C
3
2
5
1
Hydraulic connections
3
l Connect the water hose to the water
supply tap (fig. 3) only using the hose
supplied with the appliance (do
not
reuse old hose-sets).
l SOME MODELS may include one or
more of the following features:
4
l HOT&COLD (fig. 4):
water mains connection settings with hot
and cold water for higher energy savings.
Connect the grey tube to the cold water
tap
and the red one to the hot water
tap. The machine can be connected to
the cold water tap only: in this case, some
programs may start a few minutes later.
1
5
l AQUASTOP (fig. 5):
a device located on the supply tube that
stops water flow if the tube deteriorates;
in this case, a red mark will appear in the
window “A” and the tube must be
replaced. To unscrew the nut, press the
one-way lock device "B".
B
A
l AQUAPROTECT – SUPPLY TUBE WITH
6
GUARD (fig. 6):
Should water leak from the primary
internal tube "A", the transparent
containment sheath "B" will contain water
to permit the washing cycle to complete.
At the end of the cycle, contact the
Customer Service Centre to replace the
supply tube.
B
A
6
Setting
7
EN
l The washing machine should be installed in
its final position such that the water fill hose
is not kinked or trapped. The corrugated
drain hose should be inserted into suitable
drain pipe of between 50 cm and 85 cm
height above the floor using the curved drain
hose support. If an under sink connection is
used the drain hose must be routed above
the sink overfill opening to prevent back
siphoning. Care must be taken to avoid
kinking or trapping the drain hose (fig. 7).
max 100 cm
min 4 cm
l Level the appliance using the feet as
illustrated in figure 8:
a. turn the nut clockwise to release the
screw;
b. rotate the foot to raise or lower it until it
touches to the floor;
+2,6 mt
max
min 50 cm
max 85 cm
8
c. lock the foot, screwing in the nut, until it
tightens against to the bottom of the
washing machine.
A
l Plug in the appliance.
WARNING:
B
contact the Customer Service Centre
should
the
power
cord
need
replacement.
C
Installation faults are not covered by
the manufacturers warranty.
7
3. DETERGENT DRAWER
The detergent draw is split into
compartments as illustrated in figure 9:
3
9
l compartment "1": for prewash detergent;
l compartment “ ”: for special additives,
1
softeners, starch fragrances, etc.;
2
WARNING:
only use liquid products; the washing
machine is set to automatically dose
additives at each cycle during the last
rinse.
l compartment
"2":
for
10
washing
detergent.
A liquid detergent cup is also included IN
SOME MODELS (fig. 10). To use it, place it
in compartment "2". This way, liquid
detergent will only enter the drum at the
right time. The cup can also be used for
bleach when the “Rinse” program is
selected.
SOME MODELS are provided with the
automatic dosage, this carries out a
precise measurement of detergent and
softener. In this case, refer to the
specific section in the CONTROLS
AND PROGRAMS chapter for details.
WARNING:
some detergents are not designed for
use in the dispenser drawer but are
supplied with their own dispenser that
is placed in the drum directly.
8
Load tips
Before using a drying
(WASHER-DRYERS)
When sorting laundry, make sure:
- have eliminated metallic objects such as
hair clips, pins, coins, from laundry;
programme
l SAVE energy and time by selecting a
high spin speed to reduce the water
content in laundry before using a drying
programme.
- to have buttoned pillow cases, closed
zips, tied loose belts and long robe
ribbons;
Following is a quick guide with tips and
recommendations on detergent use at the
various temperatures. In any case, always
read the instructions on the detergent for
correct use and doses.
- to have removed rollers, hooks or clips
from curtains;
- to have carefully read clothing washing
labels;
- to have removed any persistent stains
using specific detergents.
When washing heavily soiled whites,
we
recommend
using
cotton
programs of 60°C or above and a
normal washing powder (heavy duty)
that contains bleaching agents that at
medium/high
temperatures
provide
excellent results.
l When washing rugs, bedcovers or other
heavy clothing, we recommend you avoid
the spinning cycle.
l To wash wool, make sure the item can be
machine washed. Check the fabric label.
For washes between 40°C and 60°C
the type of detergent used needs to be
appropriate for the type of fabric and
level of soiling.
Normal powders are suitable for “white”
or colour fast fabrics with high soiling,
while liquid detergents or “colour
protecting” powders are suitable for
coloured fabrics with light levels of
soiling.
Helpful suggestions for the user
A guide environmentally friendly and
economic use of your appliance.
Maximise The Load Size
l Achieve the best use of energy, water,
detergent and time by using the
recommended maximum load size.
Save up to 50% energy by washing a full
load instead of 2 half loads.
For washing at temperatures below
40°C we recommend the use of liquid
detergents or detergents specifically
labeled as suitable for low temperature
washing.
Do you need to pre-wash?
l For heavily soiled laundry only!
SAVE detergent, time, water and
between 5 to 15% energy consumption
by NOT selecting Prewash for slight to
normally soiled laundry.
For washing wool or silk, only use
detergents specifically formulated for
these fabrics.
Is a hot wash required?
l Pretreat stains with stain remover or soak
dried in stains in water before washing to
9
EN
reduce the necessity of a hot wash
programme. Save energy by using a low
temperature wash programme.
4. PRACTICAL HINTS
l Repeat the previous steps in reverse
5. CLEANING AND
MAINTENANCE
order to reassemble all parts.
To clean the washing machine exterior, use
a damp cloth, avoiding abrasives, alcohol
and/or solvents. To maintain a good wash
performance we recommend that the soap
drawer and pump filters are regularly
cleaned. A monthly service wash, using a
proprietary cleaner is also recommended.
Drawer cleaning
l We recommend you clean the drawer to avoid
A
B
accumulating detergent and additive residue.
l To do this, extract the drawer using slight
force, clean it with running water and
reinsert it in its housing.
l Ensure the siphon cap is correctly refitted.
Filter cleaning
l The washing machine comes with a
special filter able to trap large residue,
such as buttons or coins, which could
clog the drain (according to the model,
consider version A or B).
S u g g e s tio n s fo r m o v e s o r
prolonged disuse
l ONLY AVAILABLE ON CERTAIN MODELS:
l Should the washing machine be stored in
pull out the corrugated hose, remove the
stopper and drain the water into a
container.
l Ensure all the water has been emptied
from the drum.
l Before
unscrewing the filter, we
recommend you place an absorbent cloth
under it to keep the floor dry. A small
amount of water will come out of the filter
as you remove it - this is normal.
l Turn the filter counter-clockwise to the
an unheated room for a long period of
time, drain all water from tubes.
l Unplug the washing machine.
l Detach the tube from the drainage system
and clip on the rear of the machine and
lower it, fully draining water into a bowl.
l Secure the drain tube with the drainage
system and clip on the rear of the
machine when finished.
l Keep the door glass and gasket clean.
limit stop.
l Remove and clean the filter; when
finished, replace it turning it clockwise.
The filter handle will be locked when it is
not possible to turn any further and the
handle is horizontal. Smearing a small
amount of liquid soap on the filter seal will
help refitting.
10
The manufacturers warranty only
covers faults within the product of a
mechanical or electrical nature. Faults
caused by handling, installation or miss
use are not covered and may incur a
charge for any repair visit to resolve.
This appliance is equipped with Wi-Fi
technology that allows you to control it
remotely via App.
*
OFF
MACHINE ENROLLMENT (ON APP)
l Download the Candy simply-Fi App on
your device.
* REMOTE CONTROL (Wi-Fi)
The Candy simply-Fi App is available
for devices running both Android and
iOS, both for tablets and for
smartphones.
TO DISABLE REMOTE CONTROL
l To exit REMOTE CONTROL mode while
Get all the details of the Wi-Fi
functions by browsing the App in
DEMO mode.
l Open the App, create the user profile
(or log-in if it is already created previously)
and enroll the appliance following the
instructions on the device display or the
"Quick Guide" attached on the machine.
TO ENABLE REMOTE CONTROL
l Check that the router is switched on and
connected to the Internet.
a cycle is underway, turn the SMART
RING to any position other than REMOTE
CONTROL (Wi-Fi). The control panel on
the appliance will be operative once
again, and if the cycle is paused, you will
be able to open the door once the DOOR
LOCKED indicator light switches off.
For safety reasons, in some wash
cycle phases, the door can be
opened only if the level of the water
is below its lower edge and if the
temperature is less than 45°C. If
these conditions are met, wait for the
DOOR LOCKED light to switch off
before opening the door.
l Load the laundry, close the door, add the l With the door closed, turn the knob to the
detergent if it’s necessary.
l Turn the SMART RING (programme
selection ring) to the REMOTE CONTROL
(Wi-Fi) position: the door will lock and the
controls on the control panel will be
disabled.
l Start the cycle using the Candy simply-Fi
app. When the cycle has been completed,
turn off the machine by turning the
SMART RING to the OFF position to
unlock the door.
11
REMOTE CONTROL (Wi-Fi) position to
control the appliance using the app once
again. If there is a cycle underway, it will
continue.
EN
6. REMOTE CONTROL (WI-FI)
7. QUICK USER GUIDE
This appliance automatically adjusts the
level of the water to the type and quantity of
washing. This system gives a reduction in
energy consumption and a saving in
washing times.
8. CONTROLS AND
PROGRAMS
OFF
90°
1000
Pre
800
60°
600
400
30°
Kg Detector
Program selection
A
l Turn on the appliance and select the
required program.
I
l Adjust the washing settings if necessary
90°
60°
and select the required options.
1000
Pre
800
600
30°
400
Kg Detector
DRYING (WASHER-DRYERS only)
If you would like the drying cycle to
begin automatically after washing,
select the washing programme
required and select the drying cycle.
Or you can finish the wash and then
select the drying programme.
F G H B C D E
l Press the START (PLAY)/PAUSE button
to start the program.
l At the end of the program, the message
"END" will appear on the display (on
some models, all wash stage indicators
lights will turn on).
l Turn off the appliance.
For any type of wash, see the program
table and follow the operating sequence
as indicated.
A SMART RING (programme
selection ring)
B PLAY/PAUSE button
C DELAY START button
D OPTIONS button
E STAIN LEVEL/ALTERNATIVE
PROGRAMME SELECTION button
F TEMPERATURE SELECTION
button
G SPIN SELECTION button
H STEAM button
F+G CHILD LOCK
I
Technical data
Water pressure:
min 0.05 Mpa / max 0.8 Mpa
(0.05 MPa dispenses approximately 1 litre
of water in 10 seconds)
Spin r.p.m.: See rating plate.
Power input / Power current fuse amp /
Supply voltage: See rating plate.
12
°°
°°
Digital display
parameters, press PLAY/PAUSE. When
the programme is running, the display will
show the time to elapse.
Don’t touch the buttons while inserting
the plug because the machines
calibrates the systems during the first
seconds: touching the buttons, the
machine couldn’t work property. In
this case, remove the plug and repeat
the operation.
l Moreover, If you want to modify the
chosen program, press the desired
options buttons, modify the default
parameters and then press PLAY/
PAUSE button to start the cycle.
Only the options compatible with the
set programme can be selected.
SMART RING (ring for selecting
programmes)
l After switching on the appliance, wait a
l When the SMART RING is turned, the
few seconds for the programme to start
running.
appliance will be turned on and the
display will show the description and
parameters of the selected programme.
PROGRAMME DURATION
l At the end of the cycle, remember to
l When a programme is selected the
switch off the appliance by turning the
SMART RING to the OFF position, then
unplug the appliance and turn off the
water supply.
display automatically shows the cycle
duration, which can vary, depending on
the options selected.
l Once the programme has started you will
be kept informed constantly of the time
remaining to the end of the wash.
First starting
- Language setting
l The appliance calculates the time to the
l After connecting the machine to the
end of the selected programme based
upon a standard loading, during the cycle,
the appliance corrects the time to that
applicable to the size and composition of
the load.
network and turning it on, press the
to
STEAM or DELAY START button
display the available languages.
l Select the desired language pressing the
PLAY/PAUSE button.
PROGRAMME END
- Change the language
l "END" will appear in the display at the
end of the program and the DOOR
LOCKED light will go off, it is now
possible to open the door.
If you want to change the setting language
you will have to press simultaneously
STEAM and DELAY START buttons for
about 3 seconds. ENGLISH will appear on
the display, and you will be able to choose
a new language.
l At the end of the cycle, turn off the
washing machine by turning the SMART
RING to the OFF position.
PLAY/PAUSE button
The SMART RING must ALWAYS be
put in the OFF position at the end of
the washing cycle before you can
select a new washing cycle.
Close the porthole BEFORE pressing
the PLAY/PAUSE button.
13
EN
l To start the selected cycle with the preset
WARNING:
PAUSING THE MACHINE
l Keep the PLAY/PAUSE button pressed
for about 2 seconds (some light indicators
and the residual time display will flash,
showing that the machine is paused).
- Confirm by pressing the PLAY/PAUSE
button. The delay countdown will begin
and when it has finished the programme
will start automatically.
l You can cancel the start delay by turning
the SMART RING to the OFF position.
If there is any break in the power supply
while the machine is operating, a special
memory stores the selected programme
and, when the power is restored, it
continues where it left OFF.
For safety reasons, in some wash
cycle phases, the door can be opened
only if the level of the water is below
its lower edge and if the temperature
is less than 45°C. If these conditions
are met, wait for the DOOR LOCKED
light to switch off before opening the
door.
The following options must be
selected before pressing the PLAY/
PAUSE button.
l Press the PLAY/PAUSE button again to
re-start the programme from the point it
had been paused at.
This button allows you to choose between
three different options:
CANCELLING THE SET PROGRAMME
l To cancel the programme, turn the
SMART RING to the OFF position.
l Wait until the DOOR LOCKED light has
gone out before opening the door.
DELAY START button
- PREWASH
l This option allows you to make a prewash
and it is particularly useful for heavily
soiled loads (can be used only on some
programmes as shown in the table of
programmes).
l We recommend you use only 20% of the
l This button allows you to pre-programme
the wash cycle to delay the start of the
cycle for up to 24 hours.
l To delay the start use the following
procedure:
- Select the required programme.
- Press the delay start button once to
activate it (h00 appears on the display)
and then press it again to set a 1 hour
delay (h01 appears on the display). The
pre-set delay increases by 1 hour each
time the button is pressed, until h24
appears on the display, at which point
pressing the button again will reset the
delay start to zero.
14
OPTIONS button
recommended quantities shown on the
detergent pack.
- EXTRA RINSE
l This option allows you to add one rinse at
the end of the washing cycle and is useful
for people with delicate and sensitive
skin, for which a small amount of
detergent residue can cause irritations or
allergies.
l It is advisable to also use this function for
the children clothes and for the washing
of heavily soiled items, which requires a
lot of detergent to be used, or for the
washing of toweling items whose fibres
mostly have the tendency to hold the
detergent.
over the maximum allowed for the
programme, in order to protect the fabrics.
Activated when you set 60°C of
temperature. This option allows deep
cleaning of your clothes by maintaining the
same temperature for the whole wash.
l If you want carry out a cold wash all the
indicators must be off.
If an option is selected that is not
compatible
with
the
selected
programme then the option indicator
light first flashes and then goes off.
SPIN SELECTION button
l By pressing this button, it is possible to
reduce the maximum speed, and if you
wish, the spin cycle can be cancelled.
STAIN LEVEL/ALTERNATIVE
PROGRAMME SELECTION button
l If the label does not indicate specific
information, it is possible to use the
maximum spin expected in the program.
This button can be used to select two
different functions, depending on the
selected programme:
To prevent damage to the fabrics, it is
not possible to increase the speed
over the maximum allowed for the
programme.
- STAIN LEVEL button
l Once the programme has been selected
the wash time set for that programme will
be automatically shown.
l To reactivate the spin cycle press the
button until you reach the spin speed you
would like to set.
l This option allows you to choose between
3 levels of wash intensity modifying the
length of the programme, depending on
how much the fabrics are soiled (can
only be used on some programmes as
shown in the table of programmes).
l It is possible to modify the spin speed
without pausing the machine.
- ALTERNATIVE PROGRAMME
SELECTION
An over dosing of detergent can cause
excessive foaming. If the appliance
detects the presence of excessive foam,
it may exclude the spinning phase or
extend the duration of the program
and increase water consumption.
Where shown in the table, this option
permits selection of an alternative to the
pre-set programme (in the case of the
SAVING 14'-30'-44' programme, it allows
you to choose one of the three available
durations).
The machine is fitted with a special
electronic device, which prevents the
spin cycle should the load be
unbalanced. This reduces the noise
and vibration in the machine and so
prolongs the life of your machine.
TEMPERATURE SELECTION
button
l This button allows you to change the
temperature of the wash cycles.
15
EN
l It is not possible to raise the temperature
- HYGIENE +
If you want carry out a cold wash all the
indicators must be off.
STEAM button
This button allows a specific treatment to
follow certain wash cycles (please refer to
the program table). The steam function
works by relaxing creases in wet garments
and as a result reduces the time needed to
iron these items. The fibres are regenerated
and refreshed by removing bad smells.
Every program provides a dedicated steam
treatment in order to ensure the maximum
cleaning efficiency according to the items
fabric type and colour.
2) SPIN SPEED INDICATOR LIGHTS
This show the spin speed of the selected
programme, you can reduce or omit by the
relevant button.
3) DOOR LOCKED INDICATOR LIGHT
l The indicator light is illuminated when the
door is fully closed.
Close the door BEFORE selecting the
PLAY/PAUSE button.
This option must be selected before
pressing the PLAY/PAUSE button.
l When PLAY/PAUSE
l Pressing
is pressed on
the machine with the door closed, the
indicator will flash momentarily and then
illuminate.
l The key lock can be simply cancelled by
If the door is not properly closed,
the light will continue to flash for
about 7 seconds, after which the
start command will be automatically
delete. In this case, close the door in
the proper way and press the
PLAY/PAUSE button.
CHILD LOCK
simultaneously the buttons
TEMPERATURE SELECTION and SPIN
SELECTION for about 3 seconds, the
machine allows you to lock the keys. In
this way, you can avoid making accidental or
unwanted changes if a button on the
display is pressed accidently during a cycle.
pressing the two buttons simultaneously
again or turning off the appliance.
gone out before opening the door.
Digital Display
The display’s indicator system allows you to
be constantly informed about the status of
the machine.
1
90°
60°
2 3 4
5 6
1000
Pre
800
Kg Detector
allows to monitor information on the wash
load in the drum and in the first minutes
of the wash it:
9
- adjusts the amount of water required;
1) WASH TEMPERATURE INDICATOR LIGHTS
This show the washing temperature of the
selected programme that can be changed
(where allowed) by the relevant button.
16
°°
l During the first minutes of the cycle, the
l Through every wash phase "Kg Detector"
400
8
4) Kg Detector (function active only on
certain programmes)
"Kg Detector" indicator remain on while
the intelligent sensor will weigh the
laundry and adjust the cycle time, water
and electricity consumption accordingly.
7
600
30°
l Wait until the DOOR LOCKED light has
- determines the length of the wash cycle;
- controls rinsing according to the type of
fabric selected to be washed it;
- adjusts the rhythm of drum rotation for
the type of fabric being washed;
9) Wi-Fi INDICATOR LIGHT
indicates the status of the connection. It
could be:
- FIXED ON: remote control enabled.
- adjusts the spin speed according to the
load, thus avoiding any imbalance.
- SLOW FLASHING:
disabled.
5) KEY LOCK INDICATOR LIGHT
The indicator light show that the keys
are locked.
control
- QUICK FLASHING FOR 3 SECONDS,
THEN OFF: the machine cannot connect
to the home Wi-Fi network or has not yet
been enrolled on the App.
6) OPTIONS INDICATOR LIGHTS
The indicator lights show the option that
can be selected by the relevant button.
- SLOW BLINKING FOR 3 TIMES, THEN
OFF FOR 2 SECONDS: reset of the Wi-Fi
network (during enrollment on the App).
7) STAIN LEVEL INDICATORS LIGHTS
l Once the programme has been selected,
- ON FOR 1 SECOND, THEN OFF FOR 3
SECONDS: the door is open. Remote
control cannot be activated.
the indicator light will automatically show
the stain level set for that programme.
l Selecting a different stain level the
relevant indicator will light up.
l For
all the information about the
functionality and the instructions for an
easy configuration of the Wi-Fi, please
refer to:
go.candy-group.com/simplyfi-dualble
8) STEAM INDICATOR LIGHT
The indicator light shows the selection of
the relevant option.
17
remote
EN
l On models equipped with Wi-Fi, it
- recognizes the presence of lather,
increasing, if necessary, the amount of
water during rinsing;
Table of programmes
1)
(MAX.) *
PROGRAMME
2
(see control panel)
(MAX.)
4)
DAILY 39'
3)
HYGIENE PLUS 59'
1,5 2
2
SPORT PLUS 29'
1,5 2
2 2,5 2,5 2,5 3
3)
4)
2
2
2
2
2
2
3 3,5
2
1
40°
40°
40°
60°
30°
2
2 2,5 2,5 2,5 2,5 2,5 3
3
40°
1
1
1 1,5 1,5 1,5 1,5 2
2
30°
30' 1,5 2 2,5 2,5 2,5 2,5 2,5 3
3
30°
44'
14'
SAVING
3)
2,5 3 3,5 4 4,5 5 5,5 6 6,5
4)
MIXED &
5 6 7 8 9 10 11 12 13
COLOURED 59'
4)
PERFECT
2,5 3 3,5 4 4,5 5 5,5 6 6,5
COTTON 59'
DELICATE 59'
1
3
3 3,5 3,5 3,5 3,5 3,5 4
4
40°
RINSE
-
-
-
-
-
-
-
-
-
-
DRAIN & SPIN
-
-
-
-
-
-
-
-
-
-
WOOL/HAND WASH
1
1
1
2
2
2
2 2,5 2,5
30°
SYNTHETIC AND 2)
2,5 3 3,5 4 4,5 5 5,5 6 6,5
4)
COLOURED
60°
( )
ECO 20°
2)
5
4)
6
7
8
9
10 11 12 13
20°
COTTON**
2)
5
4)
6
7
8
9
10 11 12 13
60°
( )
WHITES
2)
5
4)
6
7
8
9
10 11 12 13
90°
( )
REMOTE CONTROL (Wi-Fi)
Position that you have to select when you want to enable remote control through the
App (via Wi-Fi).
18
** STANDARD COTTON PROGRAMMES
ACCORDING TO (EU) No 1015/2010 and
No 1061/2010.
(Only for models with liquid
detergent compartment)
When only a limited number of
articles have stains which require
treatment with liquid bleaching
agents, preliminary removal of
stain can be carried out in the
washing machine.
Pour the bleach into the liquid
bleach container, inserted into the
compartment marked "2" in the
detergent drawer, and set the
special programme RINSE.
When this phase has terminated,
switch off the appliance, add
the rest of the fabrics and
proceed with a normal wash on
the most suitable programme.
( )
Only with PREWASH option
selected
(programmes
with
PREWASH option available).
1)
When a programme is selected,
on the display is shown the
display shows the recommended
wash temperature that can be
reduced (where allowed) by the
relevant button.
2)
For the programmes shown you
can adjust the duration and
intensity of the wash using the
STAIN LEVEL button.
3)
In the programmes specified, the
STAIN
LEVEL/ALTERNATIVE
PROGRAMME SELECTION button
may be used to select an alternative
to the pre-set programme (in the
case of the SAVING 14'-30'-44'
programme, it allows you to
choose one of the three available
durations).
4)
Steam Function Available
WITH
A
COTTON PROGRAMME
TEMPERATURE OF 40°C.
WITH
A
These programmes are suitable to
clean normally soiled cotton laundry and
they are the most efficient programmes
in terms of combined energy and water
consumptions for washing cotton
laundry.
These
programmes
have
been
developed to be compliant with the
temperature on the wash label on the
garments and the actual water
temperature may slightly differ from the
declared temperature of the cycle.
19
COTTON PROGRAMME
TEMPERATURE OF 60°C.
EN
Please read these notes:
* Maximum load capacity of dry clothes,
according to the model used (see control
panel).
Description of programmes
To clean different types of fabrics and
various levels of dirt, the washing machine
has specific programs to meet every need
of washing (see table of programmes).
Choose programme in accordance
with the laundry instructions appearing
on labels, especially the maximum
recommended temperature.
DAILY 39'
The perfect combination of time saving and
performance. This programme provides an
excellent wash for half a load of laundry in
only 39 minutes. Recommended for daily
washing of laundry with average levels of
soiling.
MIXED & COLOURED 59'
This programme offers you the freedom to
wash all kinds of fabrics and non-fading
colours together, with a full load, obtaining
excellent results in only 59 minutes. With
washing at medium temperature, this
programme is recommended for laundry
that is not particularly dirty.
PERFECT COTTON 59'/HYGIENE PLUS 59'
Press the STAIN LEVEL/ALTERNATIVE
PROGRAMME SELECTION button to
choose one of the two available programmes:
- PERFECT COTTON 59'
This programme guarantees fantastic
results for cotton laundry. This option is
designed to cut washing time at medium
temperatures for fairly dirty cotton laundry.
Fill the machine only halfway for best
results.
- HYGIENE PLUS 59'
This programme offers the best possible
combination of high temperature, time and
cleaning action to guarantee maximum
sanitising power against bacteria in only 59
minutes. Recommended for cotton laundry,
it washes at a temperature of 60°C and is
best used with small loads.
20
SPORT PLUS 29'
Created to remove dirt from technical
garments used in the gym and for sports.
The programme washes for 29 minutes at a
low temperature. Recommended for small
loads of synthetic garments.
DELICATE 59'
Developed to wash and treat delicate
garments and precious fabrics. This
programme washes at a low temperature
for 59 minutes. Recommended for small
loads.
SAVING 14'-30'-44'
Saving without compromising! This new
programme may be used to obtain excellent
results while saving water, energy,
detergent and time. This option washes at a
medium temperature suitable for any kind of
fabric. Recommended for small loads.
Use the STAIN LEVEL/ALTERNATIVE
PROGRAMME SELECTION button to
choose one of the three available durations.
RINSE/DRAIN & SPIN
Press the STAIN LEVEL/ALTERNATIVE
PROGRAMME SELECTION button to
choose one of the two available programmes:
- RINSE
This program performs 3 rinses with an
intermediate spin (which can be reduced or
excluded by using the appropriate button). It
is used for rinsing any type of fabric, for
example after a wash carried out by hand.
- DRAIN & SPIN
The program completes the drain and a
maximum spin. It is possible to delete or
reduce the spin through the SPIN
SELECTION button.
WOOL/HAND WASH
This program performs a wash cycle
dedicated to the wool fabrics that can be
washed in a washing machine, or the
articles to be washed by hand.
fabrics at only 20°C and provides an
excellent cleaning performance. Consumption
on this program is about 40% of a
conventional 40°C cottons wash.
COTTON
This program is suitable to clean normally
soiled cotton laundry and it is the most
efficient program in terms of combined
energy and water consumptions for
washing cotton laundry.
WARNING:
IMPORTANT WASH PERFORMANCE
ADVICE.
l New, coloured garments should be
washed separately for at least 5 or 6
washes.
WHITES
Made to have a perfect washing. The final
spin at maximum speed gives more efficient
removal.
l Certain large dark items such as
jeans and towels should always be
washed separately.
REMOTE CONTROL (Wi-Fi)
Position that you have to select when you
want to enable / disable remote control
through the App, via Wi-Fi.
In this case, the start of cycle will take place
through the App commands.
More details in the REMOTE CONTROL
(Wi-Fi) section.
l Never mix NON COLOURFAST fabrics.
ECO 20°
This innovative programme, allows you to
wash different fabrics and colours together,
such as cottons, synthetics and mixed
21
EN
SYNTHETIC AND COLOURED
This programme allows you to wash
different type’s fabrics and different colours
all together. The rotation movement of the
drum and the water levels are optimized,
both during the washing the rinsing phase.
The accurate spin action, ensures a
reduced formation of creases in the fabrics.
9. TROUBLESHOOTING AND WARRANTY
If you believe the washing machine is not working correctly, consult the quick guide
provided below which includes some practical tips on how to fix the most common
problems.
ERROR CODE FORMAT
l Models with a display: the error is shown by a number preceded by the letter “E”
(example: E2 = Error 2).
l Models without display: an error is shown by a sequence of flashes of every LED.
The error code is shown by the number of flashes followed by a pause of 5 seconds
(example: two flashes – pause 5 seconds – two flashes – repeating = Error 2).
Error shown
E2 (with display)
2 flashes of the LEDs
(without display)
Possible causes and practical solutions
The machine cannot load water.
Make sure the water supply tap is open.
Make sure the water supply hose isn’t bent, kinked or trapped.
Make sure the drain pipe is at the proper height (see installation section).
E3 (with display)
3 flashes of the LEDs
(without display)
E4 (with display)
4 flashes of the LEDs
(without display)
E7 (with display)
7 flashes of the LEDs
(without display)
Any other code
Close the water supply tap, unscrew the filler hose from the back of
the washing machine and make sure the “anti-sand” filter is clean
and not blocked.
Check that the filter is not clogged or that there are no foreign bodies
inside the filter compartment that can obstruct the proper flow of
water.
The washing machine does not drain water.
Check that the filter is not clogged or that there are no foreign bodies
inside the filter compartment that can obstruct the proper flow of
water.
Make sure the drain hose isn’t bent, kinked or trapped.
Make sure the home drainage system is not blocked and is allowing
water to flow through without obstruction. Try to drain the water in the sink.
There is too much foam and/or water.
Ensure the correct amount of detergent is being used and the
detergent is designed for use in a washing machine.
Door problem.
Make sure the door is correctly closed.
Make sure the clothes inside the drum are not preventing the door
from closing fully.
If the door is locked, turn off and unplug the washing machine from
the electrical supply socket, wait 2-3 minutes and reopen the door.
Turn off and unplug the washing machine, wait a minute. Turn on the
machine and restart a program. If the error occurs again contact an
Authorised Customer Service Centre directly.
22
Problem
Possible causes and practical solutions
The washing machine
does not work / start
The washing machine
does not spin
Make sure the product is plugged into a working supply socket.
Make sure power is on.
Make sure the wall socket is working, testing it with another
appliance such as a lamp.
The door may not be correctly closed: open and close it again.
Check whether the required program was correctly selected and the
start button pressed.
Make sure the washing machine is not in pause or time delay mode.
This may be due to a leak from the seal between the tap, supply
hose and fill valve; in this case, replace it and tighten the hose
connections correctly.
Make sure the front filter is correctly closed.
The machine is fitted with a detection system that protects the load
and product from damage if the load is not balanced before spinning.
This may result in:• The machine attempts to balance the load, increasing the time of
spin.
• Reduction of the speed of spin to decrease vibrations and noise.
• The spin cycle aborting to protect the machine and load.
If this is experienced remove the load de-tangle it, reload it and
restart the spin program.
This could be due to the fact that water has not been completely
drained: wait a few minutes. If the problem persists, see Error 3
section.
Some models include a "no spin" function: make sure it is not
selected.
Check which options are selected and their effect on the spin cycle.
Strong vibrations /
noises are heard
during the spin cycle
Excessive detergent can impede the spin cycle, ensure the correct
amount of detergent is being used.
The washing machine may not be fully levelled: if necessary, adjust
the feet as indicated in the specific section.
Make sure transport screws, rubber bungs and spacer tubes were
removed.
Make sure there are no foreign objects inside the drum (coins,
hinges, buttons, etc…).
Water leaked on the
floor near the
washing machine
The standard manufacturer warranty covers faults caused by electrical or
mechanical faults in the product due to an act or omission of the manufacturer. If
a fault is found to be caused by factors outside the product supplied, miss-use or
as a result of the instructions on use not being followed, a charge may be
applied.
23
EN
OTHER ANOMALIES
The use of ecological detergents without
phosphates may cause the following effects:
Warranty
The product is guaranteed under the
terms and conditions stated on the
certificate included with the product. The
certificate has to be stored so as to be
shown to the Authorized Customer
Service Centre in case of need. You can
also check the warranty conditions on
our web site. To obtain assistance,
please fill in the form on-line or contact
us at the number indicated on the
support page of our web site.
- cloudier rinse drain water: This effect is
tied to the suspended zeolites which do
not have negative effects on rinse
efficiency.
- white powder (zeolites) on laundry at
the end of the wash: this is normal, the
powder is not absorbed by fabric and
does not change its colour.
To remove the zeolites, select a rinse
programme. In the future consider using
slightly less detergent.
- foam in the water at last rinse: this
does not necessary indicate poor rinsing.
Consider using less detergent in future
washes.
- abundant foam: This is often due to the
anionic surfactants found in the
detergents which are hard to eliminate
from laundry.
In this case, do not re-rinse to eliminate
these effects: it will not help at all.
We suggest conducting a maintenance
wash using a proprietary cleaner.
If the problem persists or if you suspect a
malfunction, immediately contact an
Authorised Customer Service Centre.
It is always recommended to use original
spare parts, that are available at our
Authorised Customer Service Centres.
By placing the
mark on this
product, we are confirming compliance to
all relevant European safety, health and
environmental requirements which are
applicable in legislation for this product.
The manufacturer declines all
responsibility for any printing errors in
the booklet included with this product.
Moreover, it also reserves the right to
make any changes deemed useful to its
products without changing their essential
characteristics.
24
Parameter
Specifications
(Wi-Fi)
Specifications
(Bluetooth)
Wireless Standard
802.11 b/g/n
Bluetooth v4.2
Frequency range
2,412 GHz. - 2,484 GHz.
2,412 GHz. - 2,484 GHz.
802.11b, DSSS 1 Mbps =
+19.5 dBm
Basic data Rate:
RF Transmit Power (Typ):
+4 dBm
802.11b, CCK 11 Mbps =
+18.5 dBm
Max Transmit Power
802.11g, OFDM 54 Mbps =
+18.5 dBm
802.11n, MCS7 =
+14 dBm
802.11b = 1024 bytes,
-80 dBm
802.11g = 1024 bytes,
Minimum Receiving
Sensitivity
-70 dBm
802.11n = 1024 bytes,
-65 dBm
802.11n HT40 = 1024 bytes,
-65 dBm
With this the
Enhanced data Rate:
RF Transmit Power (Typ):
+2 dBm
BLE
RF Transmit Power (Typ):
+7.5 dBm
Basic data Rate:
Sensivity @ 0.1% BER:
-98 dBm
Enhanced data Rate:
Sensivity @ 0.01% BER:
-98 dBm
BLE
Sensivity @ 0.1% BER:
-98 dBm
Candy Hoover Group Srl, declares that this appliance marked
with
complies with the essential requirements of the Directive 2014/53/EU.
To receive a copy of the declaration of conformity, please contact the
manufacturer at: www.candy-group.com
25
EN
WIRELESS PARAMETERS
fkhldsk
fkhldsk
- WM Rapidó -
19.03 - 43029020 - Canon Italia - Business Services Channel
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising