Candy CTS 80 User manual

WASHING MACHINE CANDY CTS 80
B1
C1 C2
A
H
p
A
PROGRAMME/TEMPERATURE SELECTOR
B1
WASH TEMPERATURE SELECTOR
C1
SPIN REDUCTION
C2
EXTRA RINSE
H
START/STOP KEY
p
CONTROL POSITION INDICATOR
Table of programmes mod.CTS 80
DELICATES
SYNTHETICS
COTTONS
programme
SPECIAL
aprox. Máx. temp. Máx.
time
setting
spin
min.
ºC
speed
programme for
Máx.
load
kg
1. fast coloureds with prewash
170
90º
800
5
2. fast coloureds
140
90º
800
5
*3. fast coloureds
134
60º
800
5
4. delicate coloureds
80
40º
800
5
bleach/whitener
54
800
vigorous rinse
30
800
7
5. mixed synthetics
95
60º
800
2
6. coloureds
86
50º
800
2
7. acrylics
72
40º
800
2
gentle rinse
43
gentle spin
4
8. delicates
63
40º
400
1,5
9.
woolmark woollens
54
40º
800
1
hand wash
48
•
•
•
•
•
•
•
•
30º
800
1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
800
800
34
800
gentle spin
4
800
empty
4
32
II
800
gentle rinse
fast 32 min.
I
•
vigorous spin
10.
Washing powder load
50º
800
2
Option keys C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
* Programme as per EN 60456
Technical data mod. CTS 80
Mains
voltage
230 V. /
50 Hz.
Wash
power
rating
Spin
power
rating
175 W.
340 W.
Pump
motor
power
rating
30 W.
Heating
element
power rating
1950 W.
Max.
power
input
2200 W.
Mains fuse
amp. rating
Water
pressure
10 A.
0,05-0,8
Mpa
Water
Energy
consumption consumption
* prog.
* prog.
EN 60456
EN 60456
48 l.
0,95 kWh
PREPARING THE WASH CYCLE
1.- Once the washing is loaded, ensure that the drum doors are properly closed.
2.- Add detergent and additives, not exceeding the maximum level indicator.
• detergent for pre-wash I
• detergent for wash programme II
• bleach
• fabric conditioner
SELECTING THE DESIRED PROGRAMMES AND OPTIONS
3.- Turn the programme selector (A) to the desired programme. (clokwise).
4.- Press the key or keys for any options desired (C1, C2).
C1: spin reduction key
This reduces spin speed to the figures indicated (400) at the press of the key.
C2: extra rinse key
The electronic system engaged by this key activates a new special rinse cycle. More water
and a combination of drum rotation movements ensure that washing is perfectly rinsed. The key
can be activated in Cottons, Mixed, Synthetics and Delicates programmes.
5.- Select wash temperature if required (B1)
B1 temperature selector
Use this control to select the wash temperature within the range for the programme selected
(see programme table).
The control can be turned in both directions. Select the required temperature before starting
the programme.
6.- Once you have selected the desired options, press the START key (H). The washing machine
will start up . To cancel an option after setting, just press the option key again.
To change or cancel a programme
To change or cancel a programme once the programme selected has started, proceed as follows:
- Press the key (H). The programme has been cancelled, and another may be selected.
- Select the new programme.
- Press (H) again.
- The machine will then run the new programme selected
Programme Pause
To pause the wash programme so that more washing can be added, proceed as follows:
- Hold down the key (H). When the door lock disengages (after approx. 2 minutes,), open the
door and put the additional washing into the drum.
- Close the door and press (H) again.
- The machine will continue with the programme.
11-04 / 46002010/ EN
END OF PROGRAMME
For safety’s sake, set the programme selector or the start/stop key to OFF when the programme
ends.

Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project