Candy CTS 121 User manual
EN
INTRODUCTION
Read this manual carefully as it offers practical advice to help you get the most from your
washing machine.
This Instruction Manual
contains everything you need
to know about the everyday
running of your machine.
Keep it for future reference.
An
Installation
and
Maintenance Manual is also
provided which you should
consult during the installation
and routine maintenance of
your washing machine. The
manual
also
contains
information about possible
working problems, advice
about the wash load, an
explanation of label symbols
and hints about how to remove
stubborn stains.
1.- CONTROL PANEL
2.- LID
3.- DRUM
4.- DETERGENT COMPARTMENT
5.- FILTER DOOR
6.- FILTER
When contacting a CANDY or one of its Technical Assistance Centre always refer to the model (see control panel) and the registration
and series numbers which are indicated at the bottom of the machine
under the lower panel or on the warranty certificate. That is to say,
everything that appears in the box.
Providing this information will ensure a faster and more efficient service.
3
INDEX
page
GUARANTEE .................................................................................. 5
TECHNICAL DATA .......................................................................... 6
OPENING THE LID – LOADING ................................................... 7
DETERGENT DISPENSER ........................................................... 8
AUTOMATIC VARIABLE CAPACITY - FUZZY LOGIC
ELECTRONICS .............................................................................. 9
PROGRAMME SELECTION .......................................................... 9
CONTROL DESCRIPTION .......................................................... 10
TABLE OF PROGRAMMES ....................................................... 13
4
GUARANTEE
1.
The appliance comes with a guarantee certificate.
A
2.
Complete part A and keep it in a safe place. It should
be presented to the Technical Assistance Centre in
the event of a repair being necessary along with the
legal receipt issued by the dealer on purchase.
SERVICE
5
TECHNICAL DATA
CTS 121
Load capacity ........................................................................ kg.
Voltage ..................................................................................... V.
Wash motor power rating ........................................................ W.
Spin motor power rating .......................................................... W.
Electropump power rating ....................................................... W.
Heating element power rating ................................................. W.
Max. power input ..................................................................... W.
Fuse ........................................................................................ A.
Water pressure ................................................................... MPa
Spin speed .............................................................. r.p.m./min
Water consumption (60º C programme) ................................ lit.
Energy consumption (60º C programme)/5 kg ................... kWh
Energy efficiency rating ..............................................................
6
5
230
125
400
30
1.950
2.200
10
0,05 min.
0,8 max.
1200
45
0,95
A
OPENING THE DRUM
1.
Lift the lid (A) and open it completely. Next, open the drum
door following these instructions:
E
T OF TH HINE
FRON
AC
ING M
WASH
E
T OF TH HINE
FRON
AC
ING M
WASH
E
T OF TH HINE
FRON
AC
ING M
WASH
3.
Open the rear door (D). Open the front door (C).
Place the washing in the drum.
4.
Close the front door (C).
Close the rear door (D) so that the front door (C)
fasteners fit perfectly into the slots.
5.
Ensure that the doors fit together perfectly and are
properly closed.
ATTENTION:
CLOSE THE DRUM CAREFULLY. OTHERWISE, THE
MACHINE OR THE LAUNDRY COULD GET
DAMAGED.
2 min.
E
T OF TH HINE
FRON
AC
ING M
WASH
WASHING
MACHINE LID
2.
Place your hand on the rear door (D).
Hold the catch (B) down.
Press the front door (C) to unlock the two doors (C and
D).
7
ATTENTION:
A special safety device
prevents the lid from
being opened immediately
after the wash has
finished. Once the spin
cycle has finished, wait for
2 minutes before trying to
open the lid.
DETERGENT DISPENSER
The detergent dispenser is divided into 4 compartments:
• Compartment I, is for prewash powder detergent. The recommended quantity is
60 gm of detergent (for 5 kg of laundry).
• Compartment II, is for wash powder detergent. The recommended quantity is 120
gm of detergent (for 5 kg of laundry).
• The
compartment is for bleach. The recommended quantity is 7 cl.
• The
compartment is for fabric conditioners, scenting agents and special
additives. The recommended quantity is 5 cl.
The detergent compartment has two guidance lines:
• RECOMMENDED (lower line). This indicates the recommended level for the prewash
and wash compartments.
• MAX. This indicates the maximum level which should never be exceeded.
MAXIMUM
(wash)
MAXIMUM
(prewash)
MAXIMUM
(bleach and scenting agent)
RECOMMENDED
Note: WE RECOMMEND USING DETERGENT IN POWDER FORM WHENEVER
A PRE-WASH IS PROGRAMMED.
8
AUTOMATIC VARIABLE CAPACITY – FUZZY LOGIC ELECTRONICS
This machine has electronics that automatically process all stages of the wash to
ensure exceptional results and at the same time save you time and money.
Once a programme has been selected, the machine optimises the following elements
depending on the wash load and type of fabric:
- quantity of water and power consumption
- wash time
- drum rotation rate
- rinse efficiency
The washing machine also:
- detects suds and increases the amount of rinse water if necessary
- adjusts spin speed according to load distribution, thus forestalling any imbalance in
the mechanism.
EXAMPLE: COTTONS PROGRAMME AT 60º
FULL LOAD
(5 KG)*
LOAD
HALF LOAD
SMALL LOAD
GAIN WITH REGARD TO
5 kg CYCLE
GAIN WITH REGARD TO
5 kg CYCLE
APPROX.
APPROX.
5%
30%
POWER
KWH
0,95
TIME
MIN.
134
20%
30%
45
20%
50%
WATER
LITRES
The programme duration indicated is APPROXIMATE.
PROGRAMME SELECTION
WHEN SELECTING A PROGRAMME, ENSURE THAT THE START/STOP BUTTON IS
NOT ACTIVATED.
To select a programme:
• Programmes are selected by means of the corresponding control knob (A). See the
table of programmes.
• Select spin speed.
• Select the different options available by pressing the corresponding buttons.
9
CONTROL DESCRIPTION
CTS 121
Programme selector knob ...........................................................
A
Spin selector knob ......................................................................
C
Easy-iron button ..........................................................................
D
Super-rinse button ......................................................................
E
ON/OFF button ...........................................................................
H
Reference indicator ....................................................................
p
10
USE OF THE SELECTION CONTROLS
A. PROGRAMME SELECTOR KNOB
This control allows you to select the washing programmes.
Turn the selector so that the number or symbol of the desired
programme is opposite the reference indicator (p).
ALWAYS ROTATE the control in a clockwise direction, never
in an anticlockwise direction. Do not press the “on” button
(H) before selecting the programme.
If you wish to modify the position of the control or select
another programme once a cycle has commenced, press
the On/Off button. Press again to recommence once the
modification has been completed.
C. SPIN SELECTOR
THE CONTROL CAN BE TURNED IN BOTH DIRECTIONS
This is one of the most important parts of the wash cycle. This
machine has a spin cycle flexible enough to meet all
requirements.Turn the selector to reduce maximum and
intermediate spin speeds. Spin can even be eliminated
altogether (setting ).
NB: THE ELECTRONICS IN THE MACHINE DISABLE THE
SPIN FUNCTION WHEN THE LOAD IS UNEVENLY
DISTRIBUTED, AND LIMIT VIBRATIONS AND NOISE
DURING WASHING.
11
USE OF THE SELECTION CONTROLS
D. EASY IRON BUTTON
This function helps reduce creasing, depending on the programme
selected and the type of fabric washed.
MIXED FABRICS:
- the water is cooled gradually to prevent heat shock
- the drum is not moved mechanically during emptying
- a mild spin is used to ensure that fibres are smoothed out as much
as possible.
DELICATE FABRICS (OTHER THAN WOOLLENS):
- The machine operates as indicated above and stops with the drum full of water after the
last rinse.
WOOLLENS:
- The machine stops with the drum full of water.
To complete the cycle, proceed as follows
1.- Disengage the Easy Iron (wrinkle reduction) button. The cycle will then run to completion,
with emptying and spin.
2.- Or just empty the drum:
- stop the machine by pressing Start/ Stop.
- set the programme control to OFF.
- select programme
.
- wait 5 seconds.
- start up the machine.
E. SUPER RINSE BUTTON
The new electronic system engaged by this button activates a special
rinse cycle. More water and a new combination of drum rotation
movements during filling and emptying ensure that washing is perfectly
rinsed.
This function is designed for people with sensitive, delicate skins
in whom even tiny amounts of bleach could cause irritation or
allergic reactions.
It is also recommendable for washing baby clothes, heavily soiled
clothes which need large amounts of bleach and spongy articles
which tend to retain bleach.
H.
ON/OFF BUTTON
12
TABLE OF PROGRAMMES
MAX.
LOAD Kg
APRROX.
TIME (min)
SELEC.
PROGR.
2
32
32´
50º
•
INTENSIVE WITH PREWASH
5
170
1
90º
•
NORMAL SOILING
5
140
2
90º
Rapid 32 minute super cycle
5
134
3
60º
3,5
82
4
40º
BLEACH
Organic stains
—
54
—
ENERGETIC RINSES
—
30
—
ENERGETIC SPIN
—
7
—
NORMAL SOILING
2
95
5
60º
COLOURS FAST
2
86
6
50º
COLOURS DELICATES
2
72
7
40º
DELICATE RINSES
—
43
—
DELICATE SPIN
—
4
—
DELICATES
1,5
63
8
40º
WOLL
«Machine washable»
1
54
9
40º
HAND WASH
1,5
48
10
30º
DELICATE RINSES
—
34
—
DELICATE SPIN
—
4
—
WATER DISCHARGE
—
—
—
COLOURS FAST
COLOURS DELICATES
MIXED
SYNTHETICS
RESISTANTS
RAPID PROGRAMME
EXTREM. DELIC,
FABRICS
DETERGENT
LOAD
ºC
PROGRAMME FOR
TYPE OF
FABRIC
*
CTS 121
I
BUTTON
II
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Programme
, as per EN standard 60456.
The programme times indicated are approximate.
*
The first program in each group is the longest and thus ensures
the most effective wash at a given temperature. The other programs
should be selected for clothes which are only lightly solied or are
particularly delicate.
13
NOTE:
1. If the wash load is very dirty it is best to reduce the load weight to 3 kg.
2. Programmes 1-2have an automatic bleaching option. Simply place the bleaching
agent in the
compartment.
3. The washing machine is designed to incorporate fabric softener automatically in the last
rinse of each washing cycle.
32’ FAST PROGRAMME
This programme runs through a full wash cycle for a maximum of
2 kg of washing at 50 ºC in just 32 minutes.
Put the detergent in dispenser I. Use no more than approximately
1/4 of the recommended amount of bleach (35 g. at most).
The 32’ fast programme can also be used as a pre-wash cycle for
particularly heavily soiled garments before the regular wash
programme desired.
14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising