Candy | LBCTE103TVUN | User manual | Candy LBCTE103TVUN User manual

EN
INTRODUCTION
INDEX
page
Read this manual carefully as it offers practical advice to help you get the most from your
washing machine.
GUARANTEE .............................................................................. 17
TECHNICAL DATA ....................................................................... 18
This Instruction Manual
contains everything you need to
know about the everyday
running of your machine. Keep
it for future reference.
OPENING THE LID – LOADING ................................................ 19
PRODUITS ................................................................................. 20
VARIABLE CAPACITY ................................................................. 21
An
Installation
and
Maintenance Manual is also
provided which you should
consult during the installation
and routine maintenance of
your washing machine. The manual also contains information
about possible working
problems, advice about the
wash load, an explanation of
label symbols and hints about
how to remove stubborn stains.
PROGRAMME SELECTION ....................................................... 21
CONTROL DESCRIPTION ......................................................... 22
TABLE OF PROGRAMMES ....................................................... 25
1.- CONTROL PANEL
2.- LID
3.- DRUM
4.- DETERGENT COMPARTMENT
5.- FILTER DOOR
6.- FILTER
When contacting a CANDY or one of its Technical Assistance Centre
always refer to the model (see control panel) and the registration and
series numbers which are indicated at the bottom of the machine under
the lower panel or on the warranty certificate. That is to say, everything
that appears in the box.
Providing this information will ensure a faster and more efficient service.
15
Place the adhesive label, in the
corresponding language, in the
support that slots into the back of the
panel display.
16
GUARANTEE
TECHNICAL DATA
1.
The appliance comes with a guarantee certificate.
CTE 103 TV
Load capacity .......................................................................... kg.
4,5
Voltage ....................................................................................... V.
230
Wash motor power rating ......................................................... W.
175
Spin motor power rating ........................................................... W.
340
Electropump power rating ........................................................ W.
30
Heating element power rating .................................................. W.
1.950
Max. power input ...................................................................... W.
2.200
Fuse .......................................................................................... A.
10
Water pressure ...................................................................... MPa
0,05 min.
0,8 max.
2.
Complete part B and keep it in a safe place. It should
be presented to the Technical Assistance Centre in
the event of a repair being necessary along with the
legal receipt issued by the dealer on purchase.
Spin speed ................................................................ r.p.m./min
1000
Water consumption (60º C programme) ................................... lit.
54
Energy consumption (60º C programme)/4,5 kg. ................. kWh
0,85
Energy efficiency rating .................................................................
A
3.
Do not forget to send part A of the Guarantee
Certificate to be validated within 15 days of purchase.
17
18
OPENING THE DRUM
A
FR
W ON
A
MA SH T OF
CH ING TH
IN
E
E
1.
Lift the lid (A) and open completely. Next open the drum
door following these instructions:
2.
Press catch (B) and kept it pressed down.
Press the first shutter (C) to unlock the two shutters (C)
and (D).
3.
Open the second shutter (D). Open the first shutter (C).
Place the washing in the drum.
C
D
NG LI
HI NE
AS I
W ACH
M
DETERGENT DISPENSER
B
The detergent dispenser is divided into 4 compartments:
• Compartment I, is for prewash powder detergent. The recommended quantity is 60
gm of detergent (for 4,5 kg of laundry).
• Compartment II, is for wash powder detergent. The recommended quantity is 120
gm of detergent (for 4,5 kg of laundry).
• The
compartment is for bleach. The recommended quantity is 7 cl.
• The
compartment is for fabric conditioners, scenting agents and special
additives. The recommended quantity is 5 cl.
D
The detergent compartment has two guidance lines:
FR
W ON
M AS T
AC HI OF
HI NG T
HE
NE
4.
Close the first shutter (C).
Close the second shutter (D) so that the catch on the first
shutter fits correctly into the slot. Release.
• RECOMMENDED (lower line). This indicates the recommended level for the prewash
and wash compartments.
• MAX. This indicates the maximum level which should never be exceeded.
C
5.
Ensure that both shutters are perfectly aligned and properly
closed.
D
FR
W ON
M AS T
AC HI OF
HI NG T
HE
NE
IMPORTANT: IT IS IMPORTANT TO MAKE SURE THAT
THE DRUM IS CAREFULLY CLOSED BEFORE
OPERATING THE MACHINE, OTHERWISE THE MACHINE
OR LAUNDRY COULD GET DAMAGED.
C
MAXIMUM
(wash)
2 min.
D
E
TH
F
O
NT G
O HIN E
FR AS HIN
W AC
M
C
IMPORTANT: A SPECIAL
SAFETY DEVICE PREVENTS
THE LID FROM BEING
OPENED
IMMEDIATELY
AFTER THE WASH HAS
FINISHED. ONCE THE SPIN
CYCLE HAS FINISHED, WAIT
FOR 2 MINUTES BEFORE
TRYING TO OPEN THE LID.
MAXIMUM
(prewash)
MAXIMUM
(bleach and scenting agent)
RECOMMENDED
D
19
20
VARIABLE CAPACITY
CONTROL DESCRIPTION
CTE 103 TV
This washing machine automatically adapts the water level to the type and quantity of clothes
to be washed. So it is possible to obtain a «customised» wash, even in terms of energy. This
system reduces water and energy consumption and provides an appreciable reduction in
wash time.
PROGRAMME SELECTION
WHEN SELECTING A PROGRAMME, ENSURE THAT THE START/STOP BUTTON IS NOT
ACTIVATED.
To select a programme:
• Programmes are selected by means of the corresponding control knob (A). See the
table of programmes.
• Select the wash temperature by means of the corresponding control knob.
Programme selector knob ...........................................................
A
• Select the spin speed by means of the corresponding control knob.
Temperature selector knob .........................................................
B
• Select the different options available by pressing the corresponding buttons.
Spin speed selector knob ...........................................................
C
Flot button (Anticreasing) ............................................................
D
Super-rinse button ......................................................................
E
ON/OFF pilot light .......................................................................
G
ON/OFF button ...........................................................................
H
21
22
USE OF THE SELECTION CONTROLS
USE OF THE SELECTION CONTROLS
A. PROGRAMME SELECTOR KNOB
D. FLOT BUTTON
This button works in all programmes except the 32-minute cycle.
When it is pressed, the machine stops on the last rinse, leaving the clothes
soaking in a full drum of water.
To complete the programme and spin the clothes, press the button again to
release it.
With this knob you can select the wash programme as you
wish.
ALWAYS ROTATE the control in a clockwise direction, never
in an anticlockwise direction. Do not press the “on” button (H)
before selecting the programme.
If you wish to modify the position of the control or select
another programme once a cycle has commenced, press
the Start/Stop key. Press again to recommence once the
modification has been completed.
Do not press this button if the “energetic spin” (resistants)
programme is selected.
E. SUPER-RINSE BUTTON
Pressing this button removes the last vestiges of soap powder from the
fabrics, as the rinses are done with more water.
B. TEMPERATURE SELECTOR KNOB
With this knob you can select the washing temperature as
you wish.
G.
ON/OFF PILOT LIGHT
If you wish to carry out a cold wash, turn the knob until the
cold symbol
coincides with the selector mark.
H.
ON/OFF BUTTON
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
Do not exceed the maximum temperature recommended for
each cycle in the table of programmes.
C. SPIN SPEED SELECTOR KNOB
This control allows you to select the speed of the final spin.
This knob selects the final spin speed. To select a speed,
press down and turn until the desired speed coincides with
the selector mark.
The final spin cycle reaches the maximum speed selected in
non-delicate programmes. The middle and final spin cycles
for mixed, synthetics and delicate programmes is carried out
at 400 r.p.m.
If you do not want a spin cycle, coincide the spin exclusion
symbol
with the selector mark.
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
23
24
TABLE OF PROGRAMMES
MAX.
SEL.
LOAD
PROG.
IN KG
PROGRAMME
TYPE OF
FABRIC
RAPID PROGRAMME
NORMAL SOILING
I
32´
From cold
to…50º
•
4,5
1
•
4,5
2
From cold
to…90º
From cold
to…90º
3
*
4
From cold
to…60º
COLOURS FAST
4,5
COLOURS DELICATES
3,5
BLEACH
Organic stains
—
—
ENERGETIC RINSES
—
—
ENERGETIC RINSE
—
—
ENERGETIC SPIN
—
—
NORMAL SOILING
2
5
2
COLOURS FAST
From cold
to…40º
II
•
•
•
•
•
•
•
•
•
•
•
•
•
•
From cold
to…60º
•
•
6
From cold
to…50º
•
•
7
From cold
to…40º
•
•
•
•
COLOURS DELICATES
2
DELICATE RINSES
—
DELICATE RINSE
—
—
—
—
—
DELICATE SPIN
DELICATES
1,5
8
From cold
to…40º
WOLL
«Machine washable»
1
9
From cold
to…40º
•
•
•
•
1,5
10
From cold
to…30º
•
•
•
•
HAND WASH
Programme
T
Cº
2
Rapid 32 minute super cycle
INTENSIVE WITH PREWASH
DETERGENT
SEL.
DELICATE RINSES
—
—
DELICATE RINSE
—
—
DELICATE SPIN
—
—
WATER DISCHARGE
—
Z
NOTE:
1. If the wash load is very dirty it is best to reduce the load weight to 3 kg.
2. Programmes 1, 2 have an automatic bleaching option. Simply place the bleaching agent in
the
compartment.
3. The washing machine is designed to incorporate fabric softener automatically in the last
rinse of each washing cycle.
RAPID 32 MINUTE PROGRAMME
The rapid 32 minute programme enables a complete washing cycle
for a maximum 2 kg wash at a temperature of 50°C to be carried out in
30 minutes. The temperature of the wash can be reduced via the
temperature selector knob.
The soap powder must be loaded into the pre-wash dispenser
(compartment I).
The maximum amount of soap powder which can be used for this
programme is indicated by the 32 minute mark in the dispenser.
The rapid 32 minute programme can also be used as a pre-wash cycle
in the case of a heavily soiled wash, following with the main programme
as desired.
—
*, according to EN 60456 Regulations
The first program in each group is the longest and thus ensures the most effective wash at a given
temperature. The other programs should be selected for clothes which are only lightly solied or are
particularly delicate.
25
26

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project