Candy | LB CTT75T ES | Candy LB CTT75T ES User manual

Candy LB CTT75T ES User manual
EN
INTRODUCTION
INDEX
page
Read this manual carefully as it offers practical advice to help you get the most from your
washing machine.
GUARANTEE .............................................................................. 29
TECHNICAL DATA ....................................................................... 30
This Instruction Manual
contains everything you need to
know about the everyday
running of your machine. Keep
it for future reference.
OPENING THE LID – LOADING ................................................ 31
DETERGENT DISPENSER ........................................................ 32
VARIABLE CAPACITY ................................................................. 33
An
Installation
and
Maintenance Manual is also
provided which you should
consult during the installation
and routine maintenance of
your washing machine. The manual also contains information
about possible working
problems, advice about the
wash load, an explanation of
label symbols and hints about
how to remove stubborn stains.
PROGRAMME SELECTION ....................................................... 33
CONTROL DESCRIPTION ......................................................... 34
TABLE OF PROGRAMMES ....................................................... 37
1.- CONTROL PANEL
2.- LID
3.- DRUM
4.- DETERGENT COMPARTMENT
5.- FILTER DOOR
6.- FILTER
7.- WHEEL TROLLEY
When contacting a CANDY or one of its Technical Assistance
Centre always refer to the model (see control panel) and the
registration and series numbers which are indicated at the bottom of
the machine under the lower panel or on the warranty certificate. That
is to say, everything that appears in the box.
Providing this information will ensure a faster and more efficient service.
27
Place the adhesive label, in the
corresponding language, in the
support that slots into the back of the
panel display.
28
GUARANTEE
TECHNICAL DATA
1.
The appliance comes with a guarantee certificate.
CTT 75 T
Load capacity ............................................................................. kg.
4,5
Voltage ......................................................................................... V.
230
Wash motor power rating ............................................................ W.
175
Spin motor power rating .............................................................. W.
300
Electropump power rating ........................................................... W.
30
Heating element power rating ..................................................... W.
1.935
Max. power input ........................................................................ W.
2.200
Fuse ............................................................................................. A.
10
Water pressure ....................................................................... MPa
0,05 min.
0,8 max.
2.
Complete part B and keep it in a safe place. It should
be presented to the Technical Assistance Centre in
the event of a repair being necessary along with the
legal receipt issued by the dealer on purchase.
Spin speed ................................................................... r.p.m./min
750
Water consumption (60º C programme) ..................................... lit.
59
Energy consumption (60º C programme) / 4,5 kg ................... kWh
0,85
Energy efficiency rating ...................................................................
A
3.
Do not forget to send part A of the Guarantee
Certificate to be validated within 15 days of purchase.
29
30
OPENING THE DRUM
A
FR
W ON
A
MA SH T OF
CH ING TH
IN
E
E
1.
Lift the lid (A) and open completely. Next open the drum
door following these instructions:
2.
Press catch (B) and kept it pressed down.
Press the first shutter (C) to unlock the two shutters (C)
and (D).
3.
Open the second shutter (D). Open the first shutter (C).
Place the washing in the drum.
C
D
NG LI
HI NE
AS I
W ACH
M
DETERGENT DISPENSER
B
The detergent dispenser is divided into 4 compartments:
• Compartment I, is for prewash powder detergent. The recommended quantity is 60
gm of detergent (for 4,5 kg of laundry).
• Compartment II, is for wash powder detergent. The recommended quantity is 120
gm of detergent (for 4,5 kg of laundry).
• The
compartment is for bleach. The recommended quantity is 7 cl.
• The
compartment is for fabric conditioners, scenting agents and special
additives. The recommended quantity is 5 cl.
D
The detergent compartment has two guidance lines:
FR
W ON
M AS T
AC HI OF
HI NG T
HE
NE
4.
Close the first shutter (C).
Close the second shutter (D) so that the catch on the first
shutter fits correctly into the slot. Release.
• RECOMMENDED (lower line). This indicates the recommended level for the prewash
and wash compartments.
• MAX. This indicates the maximum level which should never be exceeded.
C
5.
Ensure that both shutters are perfectly aligned and properly
closed.
D
FR
W ON
M AS T
AC HI OF
HI NG T
HE
NE
IMPORTANT: IT IS IMPORTANT TO MAKE SURE THAT
THE DRUM IS CAREFULLY CLOSED BEFORE
OPERATING THE MACHINE, OTHERWISE THE MACHINE
OR LAUNDRY COULD GET DAMAGED.
C
MAXIMUM
(wash)
2 min.
D
E
TH
F
O
NT G
O HIN E
FR AS HIN
W AC
M
C
IMPORTANT: A SPECIAL
SAFETY DEVICE PREVENTS
THE LID FROM BEING
OPENED
IMMEDIATELY
AFTER THE WASH HAS
FINISHED. ONCE THE SPIN
CYCLE HAS FINISHED, WAIT
FOR 2 MINUTES BEFORE
TRYING TO OPEN THE LID.
MAXIMUM
(prewash)
MAXIMUM
(bleach and scenting agent)
RECOMMENDED
D
31
32
VARIABLE CAPACITY
CONTROL DESCRIPTION
CTT 75 T
This washing machine automatically adapts the water level to the type and quantity of clothes
to be washed. So it is possible to obtain a «customised» wash, even in terms of energy. This
system reduces water and energy consumption and provides an appreciable reduction in
wash time.
PROGRAMME SELECTION
WHEN SELECTING A PROGRAMME, ENSURE THAT THE START/STOP BUTTON IS NOT
ACTIVATED.
To select a programme:
• Programmes are selected by means of the corresponding control knob (A). See the
table of programmes.
Programme selector knob ...........................................................
A
• Select the wash temperature by means of the corresponding control knob.
Temperature selector knob .........................................................
B
• Select the different options available by pressing the corresponding buttons.
Spin variation button 750/400 .....................................................
D
Easy-Iron button .........................................................................
E
ON/OFF pilot light .......................................................................
G
ON/OFF button ...........................................................................
H
33
34
USE OF THE SELECTION CONTROLS
USE OF THE SELECTION CONTROLS
A. PROGRAMME SELECTOR KNOB
D. SPIN VARIATION BUTTON 750/400
When this button is pressed, the spin after the last rinse will be at 400 r.p.m.
instead of 750 r.p.m.
With this knob you can select the wash programme as you
wish. Press the knob and turn it until the programme (number
or symbol) coincides with the marker point.
ALWAYS ROTATE the control in a clockwise direction, never
in an anticlockwise direction. Do not press the “on” button
(H) before selecting the programme.
E. EASY-IRON BUTTON
This button works in all programmes except the 32-minute cycle.
It can be used to minimise wrinkling of fabrics during wash programmes.
The results obtained differ with each programme:
In programmes for RESISTANTS, pressing this button will cause the machine
to stop on the last rinse, leaving clothes soaking in water.
To complete the programme and spin the clothes, press the button again to
release it.
In programmes for MIXED SYNTHETICS, pressing this button will cut out the
intermediate spins and perform only one final spin at low sped, thus minimising
the stress suffered by fabrics.
In programmes for EXTREM. DELIC. FABRICS, pressing button will cause
the machine to stop on the last rinse, leaving clothes soaking in water.
To complete the programme and spin the clothes, press the button again to
release it.
If you wish to modify the position of the control or select
another programme once a cycle has commenced, press
the On/Off button. Press again to recommence once the
modification has been completed.
Do not press this button if the “energetic spin” (resistants) programme
is selected.
B. TEMPERATURE SELECTOR KNOB
With this knob you can select the washing temperature as
you wish. Press the knob and turn it until the temperature
desired coincides with the marker point.
G.
H.
ON/OFF PILOT LIGHT
ON/OFF BUTTON
If you wish to carry out a cold wash, turn the knob until the
cold symbol
coincides with the selector mark.
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
Do not exceed the maximum temperature recommended for
each cycle in the table of programmes.
35
36
TABLE OF PROGRAMMES
MAX.
SEL.
LOAD
PROG.
IN KG
PROGRAMME
TYPE OF
FABRIC
RAPID PROGRAMME
MIXED SYNTHETICS
RESISTANTS
NORMAL SOILING
EXTREM. DELIC. FABRICS
I
32´
From cold
to…50º
•
4,5
1
•
4,5
2
From cold
to…90º
From cold
to…90º
3
*
4
From cold
to…60º
COLOURS FAST
4,5
COLOURS DELICATES
3,5
BLEACH
Organic stains
—
—
ENERGETIC RINSES
—
—
ENERGETIC RINSE
—
—
ENERGETIC SPIN
—
—
NORMAL SOILING
2
5
2
COLOURS FAST
From cold
to…40º
II
•
•
•
•
•
•
•
•
•
•
•
•
•
•
From cold
to…60º
•
•
6
From cold
to…50º
•
•
7
From cold
to…40º
•
•
•
•
COLOURS DELICATES
2
DELICATE RINSES
—
DELICATE RINSE
—
—
—
—
—
DELICATE SPIN
Programme
T
Cº
2
Rapid 32 minute super cycle
INTENSIVE WITH PREWASH
DETERGENT
SEL.
DELICATES
1,5
8
From cold
to…40º
WOLL
«Machine washable»
1
9
From cold
to…40º
•
•
•
•
1,5
10
From cold
to…30º
•
•
•
•
HAND WASH
DELICATE RINSES
—
—
DELICATE RINSE
—
—
DELICATE SPIN
—
—
WATER DISCHARGE
—
Z
NOTE:
1. If the wash load is very dirty it is best to reduce the load weight to 3 kg.
2. Programmes 1, 2 have an automatic bleaching option. Simply place the bleaching agent in
the
compartment.
3. The washing machine is designed to incorporate fabric softener automatically in the last
rinse of each washing cycle.
RAPID 32 MINUTE PROGRAMME
The rapid 32 minute programme enables a complete washing cycle
for a maximum 2 kg wash at a temperature of 50°C to be carried out in
30 minutes. The temperature of the wash can be reduced via the
temperature selector knob.
The soap powder must be loaded into the pre-wash dispenser
(compartment I).
The maximum amount of soap powder which can be used for this
programme is indicated by the 32 minute mark in the dispenser.
The rapid 32 minute programme can also be used as a pre-wash
cycle in the case of a heavily soiled wash, following with the main
programme as desired.
—
*, according to EN 60456 Regulations
The first program in each group is the longest and thus ensures the most effective wash at a given
temperature. The other programs should be selected for clothes which are only lightly solied or are
particularly delicate.
37
38
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising