Candy | CDB 264N-80 | Candy CDB 264N-80 Manuale utente

Candy CDB 264N-80 Manuale utente
Washer Dryer
Instructions for use
CDB 264 N
6+4kg
4+4Auto
Introduction
Please read these instructions for use carefully and all other information
enclosed with the washing machine.
Keep all documentation in a safe place for future reference or for any
future owners.
This appliances is intended to be used in household and
similar applications such as:
- staff kitchen areas in shops, offices and other working environments;
- farm houses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
A different use of this appliance from household environment or from typical housekeeping
functions, as commercial use by expert or trained users, is excluded even in the above
applications.
If the appliance is used in a manner inconsistent with this it may reduce the life of the
appliance and may void the manufacturer’s warranty.
Any damage to the appliance or other damage or loss arising through use that is not
consistent with domestic or household use (even if located in a domestic or household
environment) shall not be accepted by the manufacturer to the fullest extent permitted by law.
Notes on disposal
All packaging material used is environmentally-friendly and recyclable. Please help dispose of
the packaging via environmentally-friendly means.
Your supplier or local council will be able to give you
details of current means of disposal.
Valuable materials can be salvaged from an old appliance via scrap reprocessing.
Note: pull out the mains plug from any old appliance.
Cut the power cable and dispose of it, together with the
plug.
When disposing of an old washing machine, please ensure that the door lock is rendered
inoperable to prevent children shutting themselves in the appliance.
2
Contents
Page
Introduction
General delivery notes
Safety notes
Quick start
Description of controls
Programme Table
Programme selector
Detergent drawer
Detergents, washing aids and amounts to use
Useful advice for the user
The main wash
Drying
Automatic washing/drying cycle
Drying cycle
Cleaning and routine maintenance
Investigating malfunctions
Technical data
Setting up + installation
2
4
4
5
6
14
16
19
20
22
23
25
26
27
29
30
32
33
BEFORE SWITCHING ON THE APPLIANCE MAKE SURE
IT IS CORRECTLY INSTALLED AND THAT THE TRANSIT
SCREWS ARE REMOVED AS SHOWN IN PAGE 33.
3
General delivery notes
On delivery check that there is the following with the appliance:
– Instruction manual
– Certificate of guarantee
– Caps
– Inlet hose
and check that no damage has occurred during transit, and if so, call your nearest
Authorised Technical Support Service agent (see Customer Service)
Safety notes.
Note: for any cleaning or maintenance procedure for the
washing machine
A) Pull out the plug
B) Turn off the tap
C) Candy equips all its appliances with earthing. Ensure that the mains supply is earthed,
and if it is not, seek assistance from a qualified person.
D) Do not touch the appliance when hands or feet are wet or damp. Do not use the
appliance with bare feet.
E) The use of adapters, multiple connectors and/or extensions is not recommended.
Note:
water temperature can reach 90°C during the wash cycle
F) Check there is no water left in the drum before opening the door.
G) This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
H) Do not pull the power cable or the appliance itself to remove the plug from the socket.
I) The appliance must not be exposed to weather conditions (rain, direct sun, etc...)
L) When moving the appliance never lift it by the controls or by the detergent drawer.
When in transit never rest the door against the trolley or transport the appliance without
the polystyrene base.
4
M) N.B!
If the appliance is installed on a carpeted floor ensure that the ventilation holes on the
base of the appliance are not obstructed.
N) If the appliance is not running properly or breaks down, switch it off, turn off the tap and do
not tamper with the appliance.
Consult only the Authorised Technical Support Service for possible repair and ask them to
use original spare parts.
Failure to comply with the above can compromise the safety of the appliance.
O) If the appliance’s power cable should ever need replacing, consult the Authorised
Technical Support Service
Quick start
Washing
-
Open the door by using the handle “A” (Fig. 1, page 6)
Select laundry and put it in the machine
Close the door
Put detergent in the compartments as indicated in the programme guide in this instruction
manual
Select programme
Wait for the “STOP” indicator light to flash
DRYING
If you would like the drying cycle to begin automatically after
washing, select the programme required using the Drying
Selection button.
Otherwise it is possible to finish the wash and then decide on the
drying programme and load.
Press additional function buttons (if required)
-
Press the “Start/Pause” button.
The programme starts.
After washing
The indicator light “STOP” will go on.
Wait for the door lock to be released
(about 2 minutes after the programme has finished).
The “Door Security” indicator light will go out.
Switch off the washing machine by turning the
selector to “OFF” position.
Open the door and remove the laundry.
Ensure that the machine is correctly installed in line with the instructions found on page 33.
5
Description of controls
D CE M G F
B
Rapid
60’
30’
6h
Q
15’ STOP
1200 800
600
+
59 Min
400
60’
Time
R
Sensor
NG
CO
60°
40°
Rapid 32’
50°
30°
60° + Pre
IX
EC
SP
ED
30°
30°
A
LS
I
30°
40°
R
YI
M&W 40°
30’
OFF 90°
60° + Pre
9h
90’
N
120’
TO
T
3h
D
90’
H I L N OP
A
Door handle
Programme selector with “OFF” position
"Door Security" indicator light
"Delay Start" button
"Time To End" and “Delay Start” indicator light
"Spin Selection" button
Spin speed indicator light
"Stain Blaster" button
"Allergy Care" button
"Drying Selection" button
Drying programme indicators
"Cold Wash" button
“Fast Iron” button
"Start/Pause" button
Buttons indicator light
Detergent drawer
6
A
B
C
D
E
F
G
H
I
L
M
N
O
P
Q
R
60°
M
Fig. 1
50°
40°
Door handle
To open the door turn the handle in the manner illustrated in fig.
PROGRAMME selector with "OFF" position
A
B
Rotates in both directions.
The machine is turned on by
selecting a programme via the
programme selector. This status will
be indicated by the "STOP" indicator
light flashing, this light will continue
to flash until the machine has started
or the machine is returned to the
"OFF" position.
Press the "Start/Pause" button to start the selected cycle.
Once a programme is selected the programme selector remains stationary on the selected
programme till cycle ends.
Switch off the washing machine by turning the selector to "OFF".
Note:
The programme selector must be return to the "OFF" position at
the end of each cycle or when starting a subsequent wash cycle
prior to the next programme being selected and started.
DOOR SECURITY indicator light
C
The “Door Security” indicator light is illuminated when the door is fully closed and the machine is ON.
When "Start/Pause" is pressed on the machine with the door closed the indicator will flash
momentarily and then illuminate.
If the door is not closed the indicator will continue to flash.
A special safety device prevents the door from being opened immediately after the end of the cycle.
Wait for 2 minutes after the wash cycle has finished and the “Door Security” light has gone out
before opening the door. At the end of cycle turn the programme selector to "OFF" .
7
D
“DELAY START button”
Appliance start time can be set with this button, delaying the start by 3, 6 or 9 hours.
Proceed as follows to set a delayed start:
Select a programme (“STOP” indicator light blinks)
Press "Delay Start" button (each time the button is pressed the start will be delayed by 3, 6
or 9 hours respectively and the corresponding light will blink).
Press "Start/Pause" to commence the Delay Start operation (the indicator light associated
with the selected Delay Start time stops blinking and remains ON).
At the end of the required time delay the programme will start.
To cancel the Delay Start function :
press the "Delay Start" button until the indicator lights will be off (The "STOP" light blinks)
and the programme can be started manually using the "Start/Pause" button or switch off the
appliance by turning the programme selector to "OFF" position.
Warning: If there is any break in the power supply while
the machine is operating, a special memory stores the
selected programme and, when the power is restored, it
continues where it left off.
E
TIME TO END indicator light
In order to manage your time better, this washing machine features an indicator light system
that keeps you constantly informed on the remaining cycle time.
Indicator light 90:
Remaining time above 60 minutes.
Indicator light 60:
Remaining time less than 60 minutes.
Indicator light 30:
Remaining time less than 30 minutes.
Indicator light 15:
Remaining time less than 15 minutes.
Indicator light STOP:
End of the programme.
8
F
“SPIN SELECTION” button
The spin cycle is very important to remove as much water as possible from the laundry without
damaging the fabrics. You can adjust the spin speed of the machine to suit your needs.
By pressing this button, it is possible to reduce the maximum speed, and if you wish, the spin cycle
can be cancelled. To reactivate the spin cycle press the button until you reach the spin speed you
would like to set. To prevent damage to the fabrics, it is not possible to increase the speed over
that which is automatically suitable during the selection of the program.
It is possible to modify the spin speed without to pausing the machine.
Note:
The machine is fitted with a special electronic device, which prevents
the spin cycle should the load be unbalanced. This reduces the noise
and vibration in the machine and so prolongs the life of your machine.
G
Spin speed indicator light
When you set a program, the maximum possible spin speed will be automatically shown by
the relevant indicator light.
Choosing a smaller spin speed by the appropriate button, the relevant indicator light will go on.
The option buttons should be selected before pressing
the "Start/Pause" button.
H
“STAIN BLASTER” Button
By pressing this button, which can only be activated in the Cotton cycles, the sensors in the
new system come into operation. They affect both the selected temperature, keeping it at a
constant level throughout the wash cycle, and the mechanical function of the drum.
The drum is made to turn at two different speeds at crucial moments. When the detergent
enters the garments, the drum rotates in such a way that the detergent is distributed in a
uniform manner; during the wash and rinse procedures, however, the speed increases in
order to maximise the cleaning action. Thanks to this special system, the efficiency of the
wash procedure is improved WITHOUT ANY INCREASE IN THE LENGTH OF THE
PROGRAM.
9
I
“ALLERGY CARE” button
By pressing this button you can activate a special new wash cycle in the Cotton and Mixed
Fabrics programs, thanks to the new Sensor System. This option treats with care the fibres of
garments and the delicate skin of those who wear them.
The load is washed in a much larger quantity of water and this, together with the new combined
action of the drum rotation cycles, where water is filled and emptied, will give you garments which
have been cleaned and rinsed to perfection. The amount of water in the wash is increased so that
the detergent dissolves perfectly, ensuring an efficient cleaning action. The amount of water is also
increased during the rinse procedure so as to remove all traces of detergent from the fibres. This
function has been specifically designed for people with delicate and sensitive skin, for whom even
a very small amount of detergent can cause irritation or allergy.
You are advised to also use this function for children’s clothing and for delicate fabrics in general,
or when washing garments made of towelling, where the fibres tend to absorb a greater quantity of
detergent. To ensure the best performance for your wash, this function is always activated on the
Delicates and Woollens/Hand Wash programs.
“DRYING SELECTION” button
L
With the programme selector not in the OFF position, press the button to select the required
drying programme; an indicator will light to display the drying result selected each time you
press the button.
To cancel the selection before the start of a drying programme, press the button repeatedly
until the indicators go out or return the programme selector to the OFF position.
To cancel the cycle during the drying phase, hold the button down for 2 seconds until the
cooling indicator lights up; given the high temperature inside the drum, we recommend that
you allow the dryer to complete the cool down period before returning the programme
selector to the OFF position and removing the laundry.
Drying programme indicators
M
The indicators display the type of programme and/or drying time:
Automatic Programmes: By selecting one of these 3 automatic programmes, the washerdryer will calculate the time needed for drying and the residual dampness required, according
to the load and drying type selected.
After pressing the START button, one of the indicators will light to display the drying time
remaining.
= Extra dry drying programme (recommended for towels, bathrobes and bulky
loads)
= Cupboard dry drying programme
= Iron dry drying programme
10
USEFUL TIPS:
The 30 minute drying programme is recommended for small loads (less than 1 kg) or slightly
damp loads.
Your washer-dryer ends the cycle automatically when it reaches the drying level selected.
For the correct operation of the appliance, it is preferable not to interrupt the drying phase
unless it is really necessary.
Timed programmes:
120 minutes – 90 minutes – 60 minutes – 30 minutes:
Dual function indicators:
If one of the 3 automatic drying programmes is selected, the indicators display the drying
time remaining
They may be used to select timed drying programmes.
Cool down phase
:
Switched on during the final cool down period, in the last 10 minutes of each drying phase.
N
“COLD WASH” button
By pressing this button it is possible to transform every programme into a cold washing one,
without modifying other characteristics (water level, times, rythmes, etc...).
Curtains, small carpets, man made delicate fabrics, non coulor fast garments can be safely
washed thanks to this new device.
O
“FAST IRON” button
The Fast Iron function (Not available on COTTON programmes) minimizes creases as much
as possible with a uniquely designed anti-crease system that is tailored to specific fabrics.
MIXED FABRICS - the water is gradually cooled throughout the final two rinses with no
spinning and then a delicate spin assures the maximum relaxation of the fabrics.
DELICATE FABRICS – after the final two rinses with no spinning the machine stops in the
final rinse stage and the option indicators blink. The load is held in the water in the drum,
thus reducing creasing and enabling easier ironing.
WOLLENS/HAND WASH – after the final rinse the load is held in the water in the drum,
thus reducing creasing and enabling easier ironing and the option indicators blink.
To complete the cycle press the Fast Iron button and the machine will pump out the water
and complete the cycle.
If you do not want to spin the clothes and activate drain only:
- Turn the programme selector to the "OFF" position;
- Select programme drain only
;
- Switch on the appliance again by pressing the "Start/Pause" button.
11
P
START/PAUSE button
When a programme is selecting, wait for the “STOP” indicator
light to flash before pressing the "Start/Pause" button.
Press to start the selected cycle (according to the selected cycle one indicator lights will go on) .
NOTE: When the "Start/Pause" button has been pressed,
the appliance can take few seconds before it starts
working.
Changing the settings after the programmes has started (PAUSE)
The programme may be paused at any time during the wash cycle by holding down the
"Start/Pause" button for about two seconds. When the machine is in the paused mode, the
indicator light "Time To End", spin speed and option buttons will flash.
To restart the programme, press the "Start/Pause" button once again.
If you wish to add or remove items during washing, wait 2 minutes until the safety device
unlocks the door.
When you have carried out the manoeuvre, close the door, press "Start/Pause" button and
the appliance will continue working where it left off.
CANCELLING THE PROGRAMME
To cancel the programme, set the selector to the OFF position.
Select a different programme.
Re-set the programme selector to the OFF position.
Q
Buttons indicator light
These light up when the relevant buttons are pressed.
If an option is selected that is not compatible with the selected programme then the light on
the button first flashes and then goes off.
12
TABLE OF PROGRAMMES
PROGRAMME
SELECTOR ON:
PROGRAM FOR:
WEIGHT
MAX
kg
TEMP. CHARGE DETERGENT
°C
II2
Resistant fabrics
Cotton, linen
Cotton, mixed
resistant
Cotton, mixed
Whites
90°
6
90°
Whites with
Prewash
60° + Pre
6
60°
Fast coloureds
60°
6
60°
Non fast coloureds
40°
6
40°
Delicates
30°
6
30°
Fast coloureds with
Prewash
60° + Pre
3
60°
Fast coloureds
60°
3
60°
Synthetics
50°
3
50°
Non fast coloureds
40°
3
40°
Rinse
-
-
Fast spin
-
-
Drain only
-
-
*
*
*
*
*
Mixed fabrics and synthetics
Mixed, resistant
Cotton, mixed fabrics,
synthetics
Synthetics (nylon,
perlon), mixed cotton
*
*
*
*
*
*
Very delicate fabrics
*
Delicates
40°
1,5
40°
“MACHINE
WASHABLE”
woollens
30°
1
30°
Hand wash
30°
1
30°
Mixed, delicate
synthetics
30°
3
30°
Rapid 32 minute
Rapid 32’ 50°
2
50°
Mix & Wash
system programme
M&W 40°
6
40°
Mixed - Drying
3
-
Cotton - Drying
4
-
1,5
30°
*
SpecialS
**
*
Cotton - Mixed
Rapid
+
14
59 Min
1
I
Please read these notes
When washing heavily soiled laundry it is recommended the load is reduced to 4 kg maximum.
Information for the test laboratories
(Ref. EN 50229 Standards)
Washing
Use the programme **
Drying
First drying with 4kg (the load consist: pillowcases and hand-towels) selecting the cotton
drying programme (
) cupboard dry (
).
Second drying with 2kg (the load consist: 2 sheets and hand towels) selecting the cotton
drying programme (
) cupboard dry (
).
The spin speed may also be reduced, to match any guidelines suggested on the fabric label, or for
very delicate fabrics cancel the spin completely this option is available with a spin speed button.
* Programmes for automatic drying.
Rapid
+
59 Min
OFF 90°
CO
60°
T
T
D
60° + Pre
NG
YI
R
O
M&W 40°
N
40°
Rapid 32’
50°
30°
60° + Pre
30°
60°
M
IX
I
EC
SP
30°
ED
30°
A
LS
50°
40°
40°
15
Programme selector
For the various types of fabrics and various degrees of dirt the washing machine has
different programme bands according to: wash cycle, temperature and lenght of cycle (see
table of washing cycle programmes).
COTTONS
The Cotton programme is designed for maximum washing and rinsing
efficiency. With spin cycles in between, the programme guarantees the
laundry is rinsed perfectly. The final spin cycle ensures laundry is spun dry
as much as possible up to the maximum speed.
COTTON
The Cotton programme includes a Prewash cycle. This option is
particularly useful for really dirty loads and can be used independently of
the main wash programme. Additional detergent for the Prewash part of
the programme should be added to the first compartment of the soap
drawer labelled "I" (please refer to the section of this manual entitled
“Detergent”). We recommend you use only 20% of the quantity used for
the main wash programme.
MIXED AND SYNTHETIC FABRICS
The main wash and the rinse gives best results thanks to the rotation
rhythms of the drum and to the water levels.
A gentle spin will mean that the fabrics become less creased.
MIXED
SPECIAL “RINSE” PROGRAMME
This programme carries out three rinses with a intermediate spin (which
can be reduced or excluded by using the correct button). It can be used
for rinsing any type of fabric, eg. use after hand-washing.
SPECIAL “SPIN” PROGRAMME
Programme “SPIN” carries out a maximum spin (which can be reduced by
using the correct button).
DRAIN ONLY
This programme drains out the water.
SPECIAL DELICATE FIBRES
This is a new wash cycle which alternates washing and soaking and is
particularly recommended for very delicate fabrics.
The wash cycle and rinses are carried out with high water levels to ensure
best results.
16
40°
WOOLMARK PROGRAMME
The
certified
by WOOLMARK,
to thoroughly
wash
Thisspecial
specialcycle,
cycle
enables
to thoroughlyenables
wash garments
without
garments
damaging
them. Theofcycle
comprises
damaging without
them. The
cycle comprises
alternate
periodsofofalternate
activity
periods
of activity
and pauses.
programme
has a maximum
and pauses.
The programme
hasThe
a maximum
temperature
of 30°
temperature
of 30°
concludes
rinses and a short spin.
and concludes
withand
3 rinses
and a with
short3spin.
SPECIAL “HAND WASH”
This washing machine also has a gentle Hand Wash programme cycle.
This programme allows a complete washing cycle for garments specified
as “Hand Wash only” on the fabric care label. The programme has a
temperature of 30°C and concludes with 3 rinses and a slow spin.
“SHIRTS” PROGRAMME
This programme allows a complete washing cycle for shirts.
The main wash and the rinse gives best results thanks to the rotation
rhythms of the drum and to the water levels.
The programme has a maximum temperature of 30°C and concludes with
3 rinses and a short spin.
30°
30°
30°
32 MINUTE RAPID PROGRAMME 50°C
The 32 minute rapid programme allows a complete washing cycle to be Rapid 32’
carried out in approximately 30 minutes, with up to a maximum load of 2 kg
50°
and a temperature of 50°C.
When selecting the "32 minute rapid" programme, please note that we
recommend you use only 20% of the recommended quantities shown on the
detergent pack.
“MIX && WASH
WASHSYSTEM”
SYSTEM” PROGRAMME
PROGRAMME
“MIX
This isis an
an exclusive
exclusiveCandy
Candysystem
systemand
andinvolves
involves2 2great
greatadvantages
advantages
This
forfor M&W 40°
the consumer:
consumer:
the
• to
to be
be able
able toto wash
wash together
togetherdifferent
differenttype
typeofoffabrics
fabrics(e.g.
(e.g.cotton
cotton+ +
synthetic
synthetic etc…)
etc…)FAST
FASTCOLOUREDS;
COLOUREDS;
•to
•to wash
wash with
withaaconsiderable
considerableenergy
energysaving.
saving.
The
The "Mix
"Mix && Wash"
Wash"programme
programmehas
hasaatemperature
temperatureofof40°C
40°Cand
andalternate
alternate
dynamic
soak
dynamic phases
phases (the
(thebasket
basketthat
thatturns)
turns)totostatic
staticphases
phases(fabrics
(fabricsin in
soak
in
thethe
2 2
in phase
phase ofof rest)
rest)with
withaaduration
durationprogramme
programmethat
thatalmost
almostreaching
reaching
hours.
hours.
The
The energy
energyconsumption
consumptionfor
forthe
thecomplete
completecycle
cycleisisonly
only850
850W/h.
W/h.
Important:
Important:
•the
•the first
first washing
washingofof new
newcoloureds
colouredsfabrics
fabricsmust
mustbebedone
doneseparately;
separately;
• in
in every
every case,
case,never
nevermix
mixNON-FAST
NON-FASTCOLOUREDS
COLOUREDSfabrics.
fabrics.
17
DRYING
Note: Dispensers used for concentrated powders and liquid
detergents must be removed from the drum before commencing the
tumble drying programmes.
The drum changes direction during the drying cycle to prevent the laundry
from tangling and hence produce even drying. Cool air is used during the
last ten minutes of the drying cycle to minimise creasing.
LOW HEAT
Low temperature drying programme for synthetics and mixed fibres,
always refer to the care label.
HIGH HEAT
High temperature drying programme for Cottons and linen items, always
refer to the care label
WASH'N DRY 59’
Rapid
+
59 Min
When you only have a few items to wash and dry in a hurry, this 59
minute cycle is the ideal time saver!
Suitable for a light 1.5kg load size (e.g. 4 shirts) or slightly dirty
fabrics, this cycle will wash, rinse, spin and dry your garments in
under an hour.
We recommend that you reduce the detergent dosage when using
this programme to avoid wastage.
Auto half load
The washing machine is fitted with a self adjusting water level system.
This system enables the machine to use the amount of water needed to wash and rinse the
laundry in relation to the particular load.
This results in a reduction of the water and electricity used, without in any way compromising
the washing and rinsing performance.
In fact the amount of water and electricity used will always be appropriate for the clothes load.
The washing machine automatically ensures excellent washing results at minimum cost whilst
respecting the environment .
18
Detergent drawer
P
R
The detergent drawer is split into 3 compartments:
- the compartment labelled "I" is for prewash detergent;
- the compartment labelled " " is for special additives,
fabric softeners, fragrances, starch, brighteners etc;
- the compartment labelled "II" is for main wash
detergent.
NOTE:
Some Detergents are Difficult to
utilise. Ensure to use an in drum
dispenser if recommended by
the detergent Manufacturer.
Note: only put liquid products in the compartment
labelled “
”. The machine is programmed to
automatically take up additives during the final rinse
stage for all wash cycles.
19
Detergents, washing aids and amounts to use
Choice of detergent
General purpose detergents
-
-
Powder detergents, for a thorough wash, with bleaching agent, particularly suitable for
use in hot wash programmes (60°C and over), for heavily soiled and stained laundry.
Liquid detergents, particularly suitable for grease stains, such as greasy skin marks,
cosmetics and oil.
These detergents are not suitable for washing stained laundry, as they do not contain
bleach.
Biological detergents, not all the products available give a really thorough wash.
Additional laundry aids
-
Water softener, means less detergent can be used where water hardness is classed as
hard to very hard.
Prewash substances, for the programmed treatment of stains prior to the main wash.
Using them means the subsequent wash can be at a low temperature or with bleach-free
detergents.
Fabric softener, prevents static build-up in synthetic fabrics and softens fabrics.
If you own a tumble dryer, clothes are softened even without the use of a fabric softener.
Do not put solvents in the washing machine!
Keep detergents and other laundry products out of children’s reach.
Before pouring in the detergent check that there are no foreign bodies in the detergent
drawer.
Dosage details are usually shown on the detergent packaging. Follow those instructions.
20
Dosages
Only use detergents which are suitable for use in a washing machine.
You will obtain the best results from your wash with the minimum use of chemical products
and the best care for your laundry if you take into consideration the degree of soiling as well
as the type of detergent to choose.
The amount of detergent to use depends on:
- water hardness: depending on the hardness of the water and the type of detergent used, it
is possible to reduce the amount of detergent.
- the degree of soiling: it is possible to reduce the amount of detergent used depending on
the degree of soiling.
- amount of laundry: it is possible to reduce the amount of detergent when washing only a
small amount of laundry.
Dosage for powder detergent
For normal and low concentration detergents: for normally soiled laundry choose a
programme without prewash.
Put the detergent in compartment “II” of the drawer.
For heavily soiled laundry, choose a programme with prewash.
Put 1/4 of the detergent in compartment “I”, 3/4 in compartment “II” of the drawer.
When using water softeners, first put in the detergent, then add the softener to compartment “II”.
For highly concentrated detergents not in single dose format, follow what is shown on pack
exactly as regards type and amount of dosage.
To avoid the difficulty of checking if the detergent has been taken up, use the dosage aids
provided in the detergent packaging.
Liquid detergent dosage
Liquid detergents may be used in accordance with the instructions on the relevant
packaging, for all programmes without prewash, by using the special container which is
placed in the drum or, for those models that have it, in the special insert for liquid detergents.
Recommendations on the use of detergent at various temperatures
When washing heavily soiled whites, we recommend using cotton programs of 60°C or above
and a normal washing powder (heavy duty) that contains bleaching agents that at medium/
high temperatures provide excellent results. For washes between 40°C and 60°C the type
of detergent used needs to be appropriate for the type of fabric and level of soiling. Normal
powders are suitable for “white” or colour fast fabrics with high soiling, while liquid detergents
or “colour protecting” powders are suitable for coloured fabrics with light levels of soiling.
For washing at temperatures below 40°C we recommend the use of liquid detergents or
detergents specifically labeled as suitable for low temperature washing. For washing wool or
silk, only use detergents specifically formulated for these fabrics. For dosage amounts please
follow the instructions on the detergent package label.
21
Useful advice for users
Tips on using your domestic appliance in the most environmentally-friendly and economical
way
Do a full load in your washing machine
To prevent any possible waste of energy, water or detergent we recommend that you put a
full load in your washing machine, not exceed the recommended maximum load size.
Up to 50% energy saving can be made with one full load compared to two half load washes
When is prewashing really needed?
Only with particularly dirty loads!
Energy savings of 5 to 15% are made by not selecting the prewash option for normal soiled
laundry.
Which wash temperature should you choose?
Using stain removers before machine washing reduces the need to wash at temperatures
over 60°C.
Energy savings of up to 50% can be made by using a 60°C wash temperature rather than
90°C
Before using a drying programme...
SAVE energy and time by selecting a high spin speed to reduce the water content in laundry
before using a drying programme.
22
Main wash
Sorting the laundry
-
It is recommended you wash only items which are machine washable with water and
detergent and not dry-clean items.
-
If you need to wash rugs, bedspreads or other heavy items, it is best not to spin them.
-
Sort the laundry according to fabric type, degree of soiling and wash temperature: Always
follow the wash care advice on the garment label for the most suitable care and
treatment of the laundry
Laundry for hot wash
Coloured, easy-care materials
Delicates and wool
Wash by hand
Items labelled with the following symbol are not suitable for machine washing:
Dry clean
For very delicate items, such as net curtains, underwear, tights etc., you are advised to
use a laundry net or wash bag.
Woollen items must be labelled with the "Pure New Wool" symbol to be washed in the
machine, and must also be labelled "non-matting" or "machine washable".
Colour often leaks from new coloured items.
This can then colour other lighter items being washed.
We therefore recommend that coloured items should be washed for the first time
separately.
For future washes, colourfast items can only be washed with whites up to 40°C.
-
Note: when sorting laundry
-
check there are no metal objects in the laundry
(such as paper clips, safety pins, pins, coins
etc...);
button up pillowcases, fasten zips, hook & eye
fasteners, belts and long dressing gown cords;
remove curtain hooks;
pay close attention to the labels on items
if you notice stubborn stains whilst sorting the
laundry, remove them using a special detergent or
a special stain remover.
- We recommend that you do not do a full load of towelling items only as these become too
heavy since they absorb a lot of water.
23
The correct way to wash
Preparing the laundry
A) Select the laundry.
Loading the laundry
B) Open the porthole.
C) Put the laundry in the washing machine.
Close the porthole again, ensuring that no items of
laundry are obstructing the lock.
Putting detergent in machine
D) Open the drawer, choose the detergent and put in
the correct amount, according to the manufacturer’s
instructions and the advice on page 20.
Add any other laundry aids (see page 20). Close the
drawer again.
Selecting the wash programme
Refer to the programme guide or the programme descriptions on the machine to select the
most suitable programme.
Turning the selector knob, the required programme is activated.
Wait for the “STOP” indicator light to flash.
Press additional function buttons (if required).
Check that the tap is turned on and that the discharge hose is positioned correctly.
Press the "Start/Pause" button.
When the "Start/Pause" button is pressed the machine sets the working sequence in motion.
The programme carries out with the programme selector stationary on the selected
programme till cycle ends.
Warning: If there is any break in the power supply while the machine is operating, a special
memory stores the selected programme and, when the power is restored, it continues where
it left off.
When the programme is finished
At the end of the programme the indicator light “STOP” will go on.
Wait for the door lock to be released (about 2 minutes after the programme has finished).
The "Door Security" indicator light will go out.
Switch off the machine by turning the programme selector on the “OFF” position. Open the
door and remove the laundry. Turn off the tap.
24
DRYING
DON’T DRY GARMENTS MADE FROM FOAM RUBBER
OR FLAMMABLE MATERIALS.
IMPORTANT:
THIS DRYER CAN ONLY BE USED FOR LAUNDRY
WHICH HAS BEEN WASHED AND SPIN DRIED.
WARNING:
Indications given are general, therefore some practice is needed for the best drying results.
We recommend setting a lower drying time than indicated, when first using, so as to
establish the degree of dryness required. We recommend not to dry fabrics that fray easily,
such as rugs or garments with a deep pile, to avoid air duct clogging.
The water is then conveyed to the drain circuit, wich is sealed and therefore, no steam can
be released outside.
Important
Never open the door after the drying cycle has begun wait until the cool down period provided for by the
cycle.
Only dry pre-spun laundry
The washer/dryer can perform two types of drying:
1 Cotton, terry towelling, linen, hemp fabrics, etc...
Advisory note
symbol on programme dial.
During drying phase the drum will accelerate to a higher speed to distribute the load
and to optimize the drying performance
2 Mixed fabrics (synthetics/cotton), synthetic fabrics
25
symbol on programme dial.
Automatic washing/drying
Warning: only a maximum 4 kg of dry laundry can be loaded
otherwise the dried laundry will be not satisfactory.
WASHING:
Open the drawer, choose the detergent and put in the correct amount.
Refer to the list of washing programmes according to fabrics to be washed (e.g. very dirty
cotton) and without pressing Start button, prepare wash as described:
Turning the selector knob, the required programme is activated.
Wait for the “STOP” indicator light to flash.
Check that the tap is turned on and that the discharge hose is positioned correctly.
DRYING:
Select the degree of dryness that you require.
This ranges from Extra Dry (
) for bath towels and bathrobes, through Cupboard Dry
(
) for items that will be put away without ironing, to iron dry (
) that leaves the
laundry suitable for ironing.
If you wish to select a timed drying cycle, press the “drying programme selection” button until
the required time indicator lights up.
Press the "Start/Pause" button.
When the "Start/Pause" button is pressed the machine sets the working sequence in motion.
The programme carries out with the programme selector stationary on the selected
programme till cycle ends.
The washer-dryer will then complete the entire drying programme.
The drying programme indicator will be on until the cool down phase will begin and the
indicator “
” will go on.
When the programme is finished
At the end of the programme the indicator light “STOP” will go on.
Wait for the door lock to be released (about 2 minutes after the programme has finished).
The "Door Security" indicator light will go out.
Switch off the machine by turning the programme selector on the “OFF” position. Open the
door and remove the laundry. Turn off the tap.
26
Drying cycle
The correct way to dry:
- Open door.
- Fill with up to 4 kg - in case of large items (e.g. sheets) or very absorbent items (e.g.
towels or jeans), it is a good idea to reduce the load.
- Close door.
- Turn programme dial to
cotton.
Select the degree of dryness that you require.
This ranges from Extra Dry (
) for bath towels and bathrobes, through Cupboard Dry
(
) for items that will be put away without ironing, to iron dry (
) that leaves the
laundry suitable for ironing.
If you wish to select a timed drying cycle, press the “drying programme selection” button
until the required time indicator lights up.
DOUBLE-SKIN DOOR
The appliance door is fitted with a protective shield to prevent
contact with the glass door which can reach high temperatures,
during the drying cycle.
It should not be necessary to remove the shield from the machine
during the normal course of use.
Warning: do not touch door for any reason.
‡0DNHVXUHZDWHULQOHWYDOYHLVRSHQ
‡0DNHVXUHZDWHUGUDLQLVFRUUHFWO\SRVLWLRQHG
Warning:
do not dry woollen garments or articles with special padding,
(e.g. quilts, quilted anoraks, etc.).
Delicate fabrics if garments are drip/dry, load less items ao as to
prevent creasing.
Press the START button.
The drying phase will begin with the programme dial fixed on the
end of drying.
symbol until the
The drying programme indicator will be on until the cool down phase will begin and the
indicator “
” will go on.
When the programme is finished
At the end of the programme the indicator light “STOP” will go on.
Wait for the door lock to be released (about 2 minutes after the programme has finished).
The "Door Security" indicator light will go out.
Switch off the machine by turning the programme selector on the “OFF” position. Open the
door and remove the laundry. Turn off the tap.
27
Table of drying times (in minutes):
PROGRAMME
Extra
Cupboard
Iron
COTTON
MIXED
Min 1 Kg
Max 4 Kg
Min 1 Kg
Max 3 Kg
from 30’
from 30’
from 30’
to 230’
to 220’
to 170’
from 30’
from 30’
from 30’
to 170’
to 150’
to 80’
USEFUL TIPS:
Do not dry unwashed items in the washer dryer.
Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol,
kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot
water with an extra amount of detergent before being dried in the washer dryer.
Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed
articles and clothes or pillows fitted with foam rubber pads should not be dried in the
washer dryer.
Fabric softeners, or similar products, should be used as specified by the fabric softener
instructions.
The final part of a washer dryer cycle occurs without heat (cool down cycle) to ensure that
the items are left at a temperature that ensures that the items will not be damaged.
WARNING:
Never stop a washer dryer before the end of the drying cycle unless all items are quickly
removed and spread out so that the heat is dissipated.
28
Cleaning and routine maintenance
Do not use alcohol-based scourers and / or thinners on the outside of your washing machine,
just a wipe with a damp cloth will suffice. The washing machine needs very little maintenance:
- Cleaning the drawer compartments.
- Cleaning the filter.
- Cleaning the door glass.
Cleaning the drawer compartments
Even if it is not strictly necessary, it is good to clean the
compartments for bleaching detergents and additives
occasionally.
A) To do this you just need to pull them out firmly, but without
forcing them.
B) Clean everything in the compartment under running water.
C) Put everything back in its proper place.
Cleaning the filter
The washing machine is fitted with a special filter for handling
large deposits which could block the discharge hose (coins,
buttons etc.) and which can, therefore, be easily retrieved.
We recommend that the filter be cleaned at least once a month.
The cleaning operation is as follows:
1) Before removing the filter, place an absorbent towel below
the filter cap to collect the small amount of water likely to
be inside the pump
2) Turn the filter anti-clockwise until it stops in the vertical
position.
Remove and clean.
3) After cleaning, replace by turning the notch on the end of
the filter clockwise.
Cleaning the door glass
Regularly clean the door glass with a damp cloth. A build up of
soiling and residues from the water may result in water leaking
from the door.
Do not use abrasive cleaners as they can scratch the surface.
Transporting the appliance or long
periods when appliance is not in use
If the appliance is being transported or is out of use for long
periods in unheated places, all remaining water must be
completely removed from the hoses.
Ensure mains power is off, then unclip the hose and point it
downwards into a basin until all the water has emptied
out.When finished, repeat the operation in the reverse order.
29
Investigating malfunctions
What might be the cause of…
Defects you can remedy yourself
MALFUNCTION CAUSE
REMEDY
1. Does not work on any
programme
Plug not in socket.
Not switched on.
Power failure.
Fuse blown.
Door open.
Plug it in.
Switch on.
Check.
Check.
Close door.
2. Does not fill with water
See cause 1.
Tap turned off.
Programme selector not correctly positioned.
Fill hoses are kinked
Check.
Turn on tap.
Position programme selector correctly.
Straighten fill hoses
3. Water does not drain away
Kink in discharge hose.
House drain is blocked
Odd material blocking filter
Straighten discharge hose.
Clean drain
Check filter
4. Water on floor around the
washing machine
Leaking gasket between tap and water inlet
hose.
House drain is blocked
Soap drawer blocked with soap residues
Replace gasket and tighten hose and tap
well.
Clean drain
Clean soap drawer
5. Does not spin
Water has not yet drained away.
"No spin" selected (certain models only).
Wait a few minutes for machine to empty.
Reset button or turn "no spin" knob.
6. Machine vibrates a lot
during spin
Washing machine not completely level.
Transit brackets not removed yet.
Load not distributed evenly.
Adjust the special adjustable feet.
Remove transit brackets.
Rearrange the laundry evenly.
7. Door will not open
Two minutes have not elapsed since the
programme finished.
Wait two minutes.
During drying phase the drum will accelerate to a higher speed to distribute the load
and to optimize the drying performance
The machine makes a
different noise when
spinning! This is because it
has a brush motor for better
performance.
Only a small level of water can be
seen in the drum! This is because
new machines do not use much
water, yet achieve the same standard
of washing and rinsing.
30
Note:
The use of environmentally-friendly, phosphate-free detergents can have the following effects:
- waste water from rinsing may be cloudier because of the presence of zeolites held in
suspension, without the rinse performance being adversely affected;
- presence of white powder (zeolites) on laundry after washing, which is not absorbed by
the fabric and does not alter the colour of the fabric.
- The presence of foam in the final rinsing water is not necessarily an indication of poor
rinsing.
- Anionic surfactants used in washing detergent formulae often prove to be difficult to
remove from the laundry itself and, even in small quantities, can still cause considerable
foam production.
- Carrying out more rinse cycles does not serve any purpose in such cases.
CUSTOMER SERVICE AND GUARANTEE
Your new appliance is fully guaranteed by the manufacturer for 12 months against
electrical/mechanical breakdown excluding:
A. Any faults which occur due to bad installation or misuse of the machine.
B. Any faults which occur due to repair of, or interference with, the machine by any person
not authorised by the manufacturer to carry out service.
C. Any faults which arise from parts fitted to the machine which are not the manufacturers
original parts.
D. Any faults arising from non-domestic use or unusual or abnormal use of the machine.
E. Any faults arising from operation at an incorrect voltage.
F. Any faults arising from incorrect operation of the machine.
The guarantee applies to Gt. Britain and Northern Ireland only, and is an addition to your
statutory rights.
After Sales Service
If, having investigated the possible malfunctions on the chart on the previous page, you
believe the appliance is not working correctly, please call our After Sales Service dept. on
telephone number:
Gias Service
-
Tel: 08444 995599
Support Service
(Eire 0818 200021)
31
Fig. 2
Technical data
6 kg
4 kg
0,05 ÷ 0,8 MPa
Max. load of dry laundry
Max. load of dry laundry for drying
Water pressure
Measurements
Width
Depth
Height
60 cm
54 cm
82 cm
NB: For specifications regarding electrical data, see the data panel on the
front of the washing machine (porthole area) - as shown in diagram above.
Appliance complies with European Directives 73/23/EEC and 89/336/EEC, replaced by
2006/95/EC and 2004/108/EC, and subsequent amendments.
32
SETTING UP + INSTALLATION
1
Remove the polystyrene base and place the machine near
its permanent position (diagram 1).
Carefully cut through the hose retaining clip at the rear of
the appliance (diagram 2).
Remove the 3 fixing screws marked (A) and remove the 3
spacers marked (B) (diagram 3).
2
Remove the screw (C).
A spacer will fall inside the machine.
By tilting the machine, remove the above mentioned spacer.
Cover the 4 holes using the caps provided in the instruction
booklet pack (diagram 4).
3
4
WARNING:
DO NOT LEAVE THE PACKAGING WITHIN REACH OF CHILDREN AS IT IS A POTENTIAL
SOURCE OF DANGER.
Apply the insulation sheet of corrugated material to the base
as shown.
Use the 4 feet to level the machine with the floor:
a) Turn the nut clockwise to release the screw adjuster on the foot.
b) Rotate the foot to raise or lower it until it stands firmly on the
ground.
c) Lock the foot in position by turning the nut
anti-clockwise until it comes up against the bottom of the machine.
A
B
C
33
Note: we recommend you keep the screws to
immobilise the machine for future transit.
The Manufacturers will not be responsible for any
possible damage to the machine caused by not
following the rules relating to releasing the mechanism.
The user is responsible for all costs of installation.
Water connection
The appliance must be connected to the water mains using new
hose-sets.
The old hose-sets should not be re-used.
The machine has an inlet hose with 3/4" B.S.P threaded end
connection to attach between the threaded connector on the
appliance and the cold water supply.
This machine only uses cold water, therefore
only one hose is needed to connect to the cold
water supply. Do not connect to the hot supply.
Cold fill is an energy efficient system. Only the
water required for the washing is heated.There
is no loss of heat in the pipeline from a hot
water tank or boiler to the machine.
max 100 cm
min 4 cm
34
+2,6 mt max
min 50 cm
max 85 cm
Note: it is advisable to turn off the tap after each wash
to isolate the washing machine from the water supply.
The appliance must not be installed behind a lockable door, a sliding door or a door with a
hinge on the opposite side to that of the washer dryer.
For the washing machine to function properly the terminal end of the discharge hose (mouth)
must be at a minimum of 50 cm and a maximum of 85 cm from the ground.
ELECTRICAL CONNECTIONS
After installation, the appliance must be positioned so that the plug is accessible.
If the plug we supply does not fit
CUT IT OFF AND DESTROY IT!
You can’t use it on other appliances, and the exposed wires could be dangerous if plugged in.
To fit a replacement plug, proceed as follows:
Connect
to the terminal in the plug
green and yellow wire
marked with the letter E,
OR marked
with the symbol,
OR coloured green,
OR coloured green and yellow.
blue wire
marked N
OR coloured black.
brown wire
marked L
OR coloured red.
WARNING
This appliance must be earthed
Fuses and plugs
This appliance should be used only on a socket with a minimum rating of 13 Amp.
Our ready-fitted plug is already equipped with a 13 amp fuse which is BS 1362 ASTA
approved. Any replacement should be exactly the same.
If the fuse cover is lost, do not use the plug until it is replaced. A correct replacement fuse
cover (obtainable from your local retailer) must be the same colour as shown or named on
the insert on the base of the plug.
35
EN
GB
INSTRUCTIONS FOR
INSTRUCTIONS
FOR
MOUNTING DOOR
MOUNTING DOOR
Drill holes in the door
using
the cardboard
Drill holes
in the door
template
as indicated in
using the cardboard
Fig.
1 to mount
the hinges
template
as indicated
in
and
magnet
in
Fig. 1closure
to mount
the hinges
the
or left-hand
andright
closure
magnet in
position
to
the rightaccording
or left-hand
your
requirements.
position
accordingThe
to
position
of the hinges
your requirements.
The
refers
to of
thethe
upper
edge.
position
hinges
refers to the upper edge.
Screw the hinges in place
with
the
4 screws
Screw
the
hinges (A).
in place
Screw
on4 the
magnet
with the
screws
(A). (B)
with
screw
(C).
Screw
on the
magnet (B)
with screw (C).
Mount the plate (D) in the
right
or the
left-hand
position,
Mount
plate (D)
in the
according
to yourposition,
right or left-hand
requirements.
Place the
according to your
rubber
washersPlace
under
the
requirements.
the
plate
screwunder
in place
rubberand
washers
the
with
(G). in place
platescrew
and screw
Snapmount
cap (H) in the
with screw (G).
lower
position.
Snapmount
cap (H) in the
lower position.
IT
Mount the door with
Montare
porta with
hinges
byla
screwing
corredata
dithe
cerniere
screws
(L) to
front of
avvitando
lemachine.
viti (L) sul
the
washing
frontale della
lavabiancheria.
NOTE:
You are advised to
mount the door so that it
Nota: Ètowards
consigliabile
opens
the left, in
montare
porta con
il
the
samela
direction
as the
senso di apertura
washing
machine verso
load sx
comefor
è more
l’apertura
door
loading
dell’oblò per dare
space.
migliore spazio al
caricamento dei panni.
Slide the washing
machine into an opening
Incassare
la size.
of
adequate
lavabiancheria
vano
The
lower skirtingnel
may
be
di dimensioni
opportune.
applied
as preferred
but
Lo zoccolo
inferiore
può
within
the size
provided
essere applicato nel
for.
modo da voi preferito
entro le dimensioni
previste.
The four adjustable feet
allow the height of the
I 4 piedinimachine
regolabili
washing
to be
consentono
di820
variare
adjusted
from
mm
l’altezza
dellathe nuts
(by
removing
lavabiancheria
da 820
supplied
and substituting
mm (togliendo
dadi
with
5 mm nuts)i to
a in
dotazione
e sostituendoli
max.
840 mm
by raising
confeet
dadiand
altezza
5 mm)
the
blocking
the
a 840nut
mm
alzando
lock
to max,
the base
of i
piedini
ricordarsi di
the
plate.
bloccare il controdado
al fondo della lamiera.
The manufacturer declines all responsibility in the event of any printing mistakes in
this booklet. The manufacturer also reserves the right to make appropriate
modifications to its products without changing the essential characteristics.
This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic
Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste handling of this
product.
The symbol on the product indicates that this product may not be treated as household waste. Instead it shall
be handed over to the applicable collection point for the recycling of electrical and electronic equipment
Disposal must be carried out in accordance with local environmental regulations for waste disposal.
For more detailed information about treatment, recovery and recycling of this product, please contact your
local city office, your household waste disposal service or the shop where you purchased the product.
13.07 - 41039800 - Canon Italia - Business Services Channel - Printed in Italy - Imprimé en Italie
EN
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising