Candy | CDB 754DN/1-80 | Candy CDB 754DN/1-80 Manuale utente

Candy CDB 754DN/1-80 Manuale utente
Washer Dryer
Instructions for use
CDB754
854DN
D
CDB
Introduction
Please read these instructions for use carefully and all other information
enclosed with the washing machine.
Keep all documentation in a safe place for future reference or for any
future owners.
This appliances is intended to be used in household and
similar applications such as:
- staff kitchen areas in shops, offices and other working environments;
- farm houses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
A different use of this appliance from household environment or from typical housekeeping
functions, as commercial use by expert or trained users, is excluded even in the above
applications.
If the appliance is used in a manner inconsistent with this it may reduce the life of the
appliance and may void the manufacturer’s warranty.
Any damage to the appliance or other damage or loss arising through use that is not
consistent with domestic or household use (even if located in a domestic or household
environment) shall not be accepted by the manufacturer to the fullest extent permitted by law.
Notes on disposal
All packaging material used is environmentally-friendly and recyclable. Please help dispose of
the packaging via environmentally-friendly means.
Your supplier or local council will be able to give you
details of current means of disposal.
Valuable materials can be salvaged from an old appliance via scrap reprocessing.
Note: pull out the mains plug from any old appliance.
Cut the power cable and dispose of it, together with the
plug.
When disposing of an old washing machine, please ensure that the door lock is rendered
inoperable to prevent children shutting themselves in the appliance.
2
Contents
Page
Introduction
General delivery notes
Safety notes
Quick start
Description of controls
Programme Table
Programme selector
Detergent drawer
Detergents, washing aids and amounts to use
Useful advice for the user
The main wash
Drying
Automatic washing/drying cycle
Drying cycle
Cleaning and routine maintenance
Investigating malfunctions
Technical data
Setting up + installation
2
4
4
5
6
14
16
19
20
22
23
25
26
27
29
30
32
33
BEFORE SWITCHING ON THE APPLIANCE MAKE SURE
IT IS CORRECTLY INSTALLED AND THAT THE TRANSIT
SCREWS ARE REMOVED AS SHOWN IN PAGE 33.
3
General delivery notes
On delivery check that there is the following with the appliance:
– Instruction manual
– Certificate of guarantee
– Caps
– Inlet hose
and check that no damage has occurred during transit, and if so, call your nearest
Authorised Technical Support Service agent (see Customer Service)
Safety notes.
Note: for any cleaning or maintenance procedure for the
washing machine
A) Pull out the plug
B) Turn off the tap
C) Candy equips all its appliances with earthing. Ensure that the mains supply is earthed,
and if it is not, seek assistance from a qualified person.
D) Do not touch the appliance when hands or feet are wet or damp. Do not use the
appliance with bare feet.
E) The use of adapters, multiple connectors and/or extensions is not recommended.
Note:
water temperature can reach 90°C during the wash cycle
F) Check there is no water left in the drum before opening the door.
G) This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
H) Do not pull the power cable or the appliance itself to remove the plug from the socket.
I) The appliance must not be exposed to weather conditions (rain, direct sun, etc...)
L) When moving the appliance never lift it by the controls or by the detergent drawer.
When in transit never rest the door against the trolley or transport the appliance without
the polystyrene base.
4
M) N.B!
If the appliance is installed on a carpeted floor ensure that the ventilation holes on the
base of the appliance are not obstructed.
N) If the appliance is not running properly or breaks down, switch it off, turn off the tap and do
not tamper with the appliance.
Consult only the Authorised Technical Support Service for possible repair and ask them to
use original spare parts.
Failure to comply with the above can compromise the safety of the appliance.
O) If the appliance’s power cable should ever need replacing, consult the Authorised
Technical Support Service
Quick start
Washing
-
Open the door by using the handle “A” (Fig. 1, page 6)
Select laundry and put it in the machine
Close the door
Put detergent in the compartments as indicated in the programme guide in this instruction
manual
Select programme
The display will show the settings for the programme selected.
Adjust the wash temperature if necessary.
DRYING
If you would like the drying cycle to begin automatically after
washing, select the programme required using the Drying
Selection button.
Otherwise it is possible to finish the wash and then decide on the
drying programme and load.
Press additional function buttons (if required)
-
Press the “Start/Pause” button (page 8)
The programme starts.
After washing
The word “End” will appear on the display.
Wait for the door lock to be released
(about 2 minutes after the programme has finished).
The “Door Security” indicator light will go out.
Switch off the washing machine by turning the
selector to “OFF” position.
Open the door and remove the laundry.
Ensure that the machine is correctly installed in line with the instructions found on page 33.
5
Description of controls
IB
M
L
Rapid
+
59 Min
D
S
L
CIA
PE
S
Rapid
14-30-44 Min
Jeans
P
DE FGHC
N
A
Door handle
"Door Security" indicator light
"Start/Pause" button
"Stain Vanish" button
"Allergy Care" button
"Delay Start" button
"Temperature Selection" button
"Drying Selection" button
"Spin Speed" button
Digital display
Stain Level button
Programme selector with “OFF” position
Buttons indicator light
Detergent drawer
6
+ Pre
F
R
120’ 90’
60’ 30’
OFF
G
CS
RI
DETECTOR
90 60 40 30 20
IN
B
A
O
Y
Auto
Kg
A
B
C
D
E
F
G
H
I
L
M
N
O
P
“KG DETECTOR”
(Function active only on Cotton and Synthetics programmes)
Through every wash phase “KG DETECTOR” allows to monitor information on
the wash load in the drum.
So, as soon as the “KG DETECTOR” is set in motion, in the first 4 minutes of the wash, it:
- adjusts the amount of water required
- determines the length of the wash cycle
- controls rinsing
according to the type of fabric selected to be washed it:
- adjusts the rhythm of drum rotation for the type of fabric being washed
- recognises the presence of lather, increasing, if necessary, the amount of water during
rinsing
- adjusts the spin speed according to the load, thus avoiding any imbalance.
In this way “KG DETECTOR” is able to decide, by itself, the most suitable programme for
each individual wash from the hundreds of possible wash combinations.
“KG DETECTOR” meets the need for easy use by permitting a simplified programme
selection. In fact, the user need only tell the machine the type of fabric in the drum and the
degree of soiling, to obtain a perfect wash with the highest level of drying possible with a spin
which really cares for your clothes.
7
Door handle
To open the door turn the handle in the manner illustrated in fig.
“DOOR SECURITY” indicator light
A
B
The “Door Security” indicator light is illuminated when the door is fully closed and the machine is ON.
When "Start/Pause" is pressed on the machine with the door closed the indicator will flash
momentarily and then illuminate.
If the door is not closed the indicator will continue to flash.
A special safety device prevents the door from being opened immediately after the end of the cycle.
Wait for 2 minutes after the wash cycle has finished and the “Door Security” light has gone out
before opening the door. At the end of the cycle turn the programme selector to "OFF" .
“START/PAUSE” button
C
Press to start the selected cycle .
NOTE:
few seconds after the start the wash cycle will begin.
During the first 4 minutes of the wash cycle, the KG
DETECTOR (active only on cotton and synthetics
programmes) will weigh the clothes and update the
maximum wash time remaining on the display every five
seconds until the weight has been determined. While this
function is operating the “KG DETECTOR” indicator is on.
Changing the settings after the programmes has started (PAUSE)
Press and hold the “START/PAUSE” button for about 2 seconds, the flashing lights on the
options buttons and time remaining indicator will show that the machine has been paused,
adjust as required and press the “START/PAUSE” button again to cancel the flashing lights.
If you wish to add or remove items during washing, wait 2 minutes until the safety device
unlocks the door.
When you have carried out the manoeuvre, close the door, press "Start/Pause" button and
the appliance will continue working where it left off.
CANCELLING THE PROGRAMME
To cancel the programme, set the selector to the OFF position. Select a different programme.
Re-set the programme selector to the OFF position.
8
The option buttons should be selected before pressing
the "Start/Pause" button.
D
“STAIN VANISH” Button
By pressing this button, which can only be activated in the Cotton cycles, the sensors in the
new system come into operation. They affect both the selected temperature, keeping it at a
constant level throughout the wash cycle, and the mechanical function of the drum.
The drum is made to turn at two different speeds at crucial moments. When the detergent
enters the garments, the drum rotates in such a way that the detergent is distributed in a
uniform manner; during the wash and rinse procedures, however, the speed increases in
order to maximise the cleaning action. Thanks to this special system, the efficiency of the
wash procedure is improved WITHOUT ANY INCREASE IN THE LENGTH OF THE
PROGRAM.
E
“ALLERGY CARE” button
By pressing this button you can activate a special new wash cycle in the Cotton and Mixed
Fabrics programs, thanks to the new Sensor System. This option treats with care the fibres of
garments and the delicate skin of those who wear them.
The load is washed in a much larger quantity of water and this, together with the new combined
action of the drum rotation cycles, where water is filled and emptied, will give you garments which
have been cleaned and rinsed to perfection. The amount of water in the wash is increased so that
the detergent dissolves perfectly, ensuring an efficient cleaning action. The amount of water is also
increased during the rinse procedure so as to remove all traces of detergent from the fibres. This
function has been specifically designed for people with delicate and sensitive skin, for whom even
a very small amount of detergent can cause irritation or allergy.
You are advised to also use this function for children’s clothing and for delicate fabrics in general,
or when washing garments made of towelling, where the fibres tend to absorb a greater quantity of
detergent. To ensure the best performance for your wash, this function is always activated on the
Delicates and Woollens/Hand Wash programs.
F
“DELAY START” button
This button allows you to pre-programme the wash cycle to delay the start of the cycle for up
to 24 hours.
To delay the start use the following procedure:
Set the required programme.
Press the button once to activate it (h00 appears on the display) and then press it again to set
a 1 hour delay (h01 appears on the display); the pre-set delay increases by 1 hour each time
the button is pressed, until h24 appears on the display, at which point pressing the button
again will reset the delay start to zero.
Confirm by pressing the “START/PAUSE” button (the light on the display starts to flash). The
countdown will begin and when it has finished the programme will start automatically.
9
It is possible to cancel the delay start by taking the following action:
Press and hold the button for 5 seconds until the display will show the settings for the
programme selected.
At this stage it is possible to start the programme previously selected by pressing the
“START/PAUSE” button or to cancel the process by setting the selector to the OFF position
and then selecting another programme.
Warning: If there is any break in the power supply while
the machine is operating, a special memory stores the
selected programme and, when the power is restored, it
continues where it left off.
“TEMPERATURE SELECTION” button
G
When a programme is selected the relevant indicator will light up to show the recommended
wash temperature.
The Temperature button can be used to decrease or increase the temperature of your chosen
wash cycle.
Each time the button is pressed, the new temperature level is shown on the Wash
Temperature Indicator.
If you want carry out a cold wash all the indicators must be off.
“DRYING SELECTION” button
H
With the programme selector not in the OFF position, press the button to select the required
drying programme; an indicator will light to display the drying result selected each time you
press the button.
To cancel the selection before the start of a drying programme, press the button repeatedly
until the indicators go out or return the programme selector to the OFF position.
To cancel the cycle during the drying phase, hold the button down for 2 seconds until the
cooling indicator lights up; given the high temperature inside the drum, we recommend that
you allow the dryer to complete the cool down period before returning the programme
selector to the OFF position and removing the laundry.
I
“SPIN SPEED” button
The spin cycle is very important to remove as much water as possible from the laundry without
damaging the fabrics. You can adjust the spin speed of the machine to suit your needs.
By pressing this button, it is possible to reduce the maximum speed, and if you wish, the spin cycle
can be cancelled. To reactivate the spin cycle press the button until you reach the spin speed you
10
would like to set. To prevent damage to the fabrics, it is not possible to increase the speed over
that which is automatically suitable during the selection of the program.
It is possible to modify the spin speed without to pausing the machine.
Note:
The machine is fitted with a special electronic device, which prevents
the spin cycle should the load be unbalanced. This reduces the noise
and vibration in the machine and so prolongs the life of your machine.
{
5
6
Auto
3
Kg
DETECTOR
2
{
90 60 40 30 20
L
7
{
4
{
“DIGITAL” Display
120’ 90’
60’ 30’
{
8
1
The display’s indicator system allows you to be constantly informed about the status of the machine:
1) WASH TEMPERATURE
When a programme is selected the relevant indicator will light up to show the recommended
wash temperature. The Temperature button can be used to decrease or increase the
temperature of your chosen wash cycle. Each time the button is pressed, the new
temperature level is shown on the Wash Temperature Indicator.
If you want carry out a cold wash all the indicators must be off.
2) DOOR LIGHT
Once the START/PAUSE button has been pressed the light first flashes then stops flashing
and remains on until the end of the wash. 2 minutes after the end of the wash the light goes
off to show that the door can now be opened.
3) SPIN SPEED
Once the programme has been selected, the maximum spin speed allowed for that
programme appears on the display. Pressing the spin button will reduce the speed by 100
rpm each time the button is pressed. The minimum speed allowed is 400 rpm, or it is
possible to omit the spin by pressing the spin button repeatedly.
4) DELAY START LIGHT
This flashes when delay start has been set.
5) CYCLE DURATION
When a programme is selected the display automatically shows the cycle duration, which
can vary, depending on the options selected. Once the programme has started you will be
kept informed constantly of the time remaining to the end of the wash.
The appliance calculates the time to the end of the selected programme based upon a
standard loading, during the cycle, the appliance corrects the time to that applicable to
the size and composition of the load.
If is selected the automatic washing/drying, at the end of the wash phase, the drying time
remaining to the end will be shown on the display.
11
6
7
{
{
5
{
4
Auto
3
Kg
DETECTOR
2
{
90 60 40 30 20
120’ 90’
60’ 30’
{
8
1
6) KG DETECTOR indicator
Available on Cotton and Synthetic cycles, during the first 4 minutes of the cycle the intelligent
sensor will weigh the laundry and adjust the cycle time, water and electricity consumption
accordingly.
7) DRYING PROGRAMME INDICATORS
The indicators display the type of the drying programme:
Candy washer dryers incorporate an Automatic Sensor Drying function which takes the
guesswork out of setting the drying time. You simply select the degree of dryness you
require and the dryer automatically switches off when that level is reached. For added
flexibility there are 3 Sensor Drying levels to choose from:
= Extra dry programme
= Cupboard dry programme
= Iron dry programme
USEFUL TIPS:
Once the programme option has been selected, press the Start Pause button. The appliance
will then calculate the time to the end of the selected programme based upon a full dry load.
During the cycle the appliance will update the time to suit the actual load size and dampness
of the fabrics.
Timed programmes:
Alternatively you may select a pre-determined time for the drying cycle. The Timed Drying
programmes may be set to the following times:
120 minutes – 90 minutes – 60 minutes – 30 minutes:
Cool down phase
:
A 10 minute cool down phase occurs at the end of each drying cycle to ensure clothes are
not too hot to touch when the cycle finishes.
8) STAIN LEVEL
When a programme is selected the relevant indicator will light up to show the minimum
possible Stain Level.
Selecting a greater Stain Level using the special button will cause the corresponding indicator to
light up.
12
M
“STAIN LEVEL” button
By selecting this button (active only on COTTON and MIXED FIBRES programmes) there is
a choice of 3 levels of wash intensity, depending on how much the fabrics are soiled.
Once the programme has been selected the indicator light will automatically show the
minimum level required for that programme. Pressing the button increases the duration of the
wash cycle, and adjusts the wash settings accordingly. For example: Using this button on
the Rapid Wash cycle will enable you to select either a 14, 30 or 44 minute wash cycle.
PROGRAMME selector with "OFF" position
N
When the programme selector is turned
the display lights up to show the settings
for the programme selected.
N.B. To switch the machine off, turn the
programme selector to the “OFF”
position.
Today, most detergents have been improved to wash
efficiently at lower temperatures, therefore we have set the
default temperature settings of each programme to a lower
level, saving electricity and reducing the carbon footprint of
your machine.
You can select an high temperature by pressing the
temperature button.
Please refer to the programme guide for the maximum
temperature to which each programme can be set.
Press the "Start/Pause" button to start the selected cycle.
Once a programme is selected the programme selector remains stationary on the selected
programme till cycle ends.
Switch off the washing machine by turning the selector to "OFF".
Note:
The programme selector must be returned to the "OFF" position
at the end of each cycle or when starting a subsequent wash
cycle prior to the next programme being selected and started.
O
Buttons indicator light
These light up when the relevant buttons are pressed.
If an option is selected that is not compatible with the selected programme then the light on
the button first flashes and then goes off.
13
TABLE OF PROGRAMMES
PROGRAMME
SELECTOR ON:
PROGRAM FOR:
WEIGHT RECOMMENDED
MAX
TEMP.
kg
°C
MAX TEMP.
°C
CHARGE DETERGENT
II
Resistant fabrics
1)
Cotton, mixed
resistant,
Coloureds
1)
+ Pre
7
60°
Up to:
90°
**
7
40°
Up to:
60°
3,5
40°
Up to:
60°
Very delicate fabrics
2,5
40°
Up to:
40°
“MACHINE WASHABLE”
woollens
2
40°
Up to:
40°
Hand wash
1,5
30°
Up to:
30°
Rinse
-
-
-
-
-
-
-
-
-
3
40°
Up to:
40°
1,5
30°
Up to:
30°
2,5
30°
Up to:
40°
3,5
30°
Up to:
40°
3,5
30°
Up to:
30°
Mixed - Drying
3,5
-
-
Cotton - Drying
5
-
-
1,5
30°
Up to:
30°
Cotton, linen
with Prewash
Mixed fabrics and synthetics
Cotton, mixed fabrics, synthetics
Fast spin
*
*
1)
*
*
*
Drain only
Jeans
Jeans Programme
Resistant fabrics
Mixed fabrics and synthetics
Rapid 14 minute
Resistant fabrics
Mixed fabrics and synthetics
Rapid 30 minute
Resistant fabrics
Mixed fabrics and synthetics
Rapid 44 minute
Mixed, delicate
synthetics
Cotton - Mixed
*
2)
Rapid
14-30-44 Min
*
*
Rapid
+
59 Min
14
I
+
59 Min
G
+ Pre
F
S
Rapid
14-30-44 Min
CIA
PE
LS
CS
RI
D
R
IN
OFF
B
A
Y
Rapid
Jeans
Please read these notes
When washing heavily soiled laundry it is recommended the load is reduced to 4 kg maximum.
Information for the test laboratories
(Ref. EN 50229 Standards)
Washing
Use the programme ** with the maximum degree of soiling selected, maximum spin speed
and a temperature of 60°C.
Programme recommended also for test with a lower temperature.
Drying
First drying with 5kg (the load consist: pillowcases and hand-towels) selecting the cotton
drying programme (
) cupboard dry (
).
Second drying with 2kg (the load consist: 2 sheets and hand towels) selecting the cotton
drying programme (
) cupboard dry (
).
The spin speed may also be reduced, to match any guidelines suggested on the fabric label, or
for very delicate fabrics cancel the spin completely this option is available with a spin speed
button.
Pressing the wash temperature button makes it possible to wash at any temperature below
the maximum allowed.
* Programmes for automatic drying.
1) For the programmes shown you can adjust the duration and intensity of the wash
using the degree of soiling button.
2) Using the Degree of soiling button on the Rapid cycle will enable you to select either a
14, 30 or 44 minute wash cycle.
15
Programme selector
For the various types of fabrics and various degrees of dirt the washing machine has
different programme bands according to: wash cycle, temperature and lenght of cycle (see
table of washing cycle programmes).
COTTON WITH PRE WASH
The Cotton programme is designed for maximum washing and rinsing
efficiency. With spin cycles in between, the programme guarantees the
laundry is rinsed perfectly. The final spin cycle ensures laundry is spun dry
as much as possible up to the maximum speed.
The Cotton programme includes a Prewash cycle. This option is
particularly useful for really dirty loads and can be used independently of
the main wash programme. Additional detergent for the Prewash part of
the programme should be added to the first compartment of the soap
drawer labelled "I" (please refer to the section of this manual entitled
“Detergent”). We recommend you use only 20% of the quantity used for
the main wash programme.
COTTONS
The Cottons programme is also designed for maximum washing and
rinsing efficiency. With spin cycles in between, the programme guarantees
the laundry is rinsed perfectly. The final spin cycle ensures laundry is spun
dry as much as possible up to the maximum speed. This cycle is set to
40°C, but the temperature may be altered using the Temperature option
button.
MIXED AND SYNTHETIC FABRICS
The main wash and the rinse gives best results thanks to the rotation
rhythms of the drum and to the water levels.
A gentle spin will mean that the fabrics become less creased.
SPECIAL DELICATE FIBRES
This is a new wash cycle which alternates washing and soaking and is
particularly recommended for very delicate fabrics.
The wash cycle and rinses are carried out with high water levels to ensure
best results.
WOOLMARK PROGRAMME
The special cycle, enables to thoroughly wash garments without
damaging them. The cycle comprises of alternate periods of activity and
pauses. The programme has a maximum temperature of 40° and
concludes with 3 rinses and a short spin.
16
+ Pre
SPECIAL “HAND WASH”
This washing machine also has a gentle Hand Wash programme cycle.
This programme allows a complete washing cycle for garments specified
as “Hand Wash only” on the fabric care label. The programme has a
temperature of 30°C and concludes with 3 rinses and a slow spin.
SPECIAL “RINSE” PROGRAMME
This programme carries out three rinses with a intermediate spin (which
can be reduced or excluded by using the correct button). It can be used
for rinsing any type of fabric, eg. use after hand-washing.
SPECIAL “SPIN” PROGRAMME
Programme “SPIN” carries out a maximum spin (which can be reduced by
using the correct button).
DRAIN ONLY
This programme drains out the water.
JEANS PROGRAMME
This specially designed programme maintains the high quality wash performance
for resistant fabrics like Jeans.
The programme has a maximum temperature of 40°C, ideal for removing the
dirty without damaging the elasticity of the fibres.
Jeans
.
RAPID PROGRAMME
This programme is particularly suited to slightly dirty cottons and mixed
fabrics. Using the Stain Level button on the Rapid cycle will enable you to
select either a 14, 30 or 44 minute wash cycle.
When selecting the rapid programme, please note that we recommend you
use only 20% of the recommended quantities shown on the detergent
pack. For information about these programmes please refer to the programmes
table.
17
Rapid
14-30-44 Min
“SHIRTS” PROGRAMME
This programme allows a complete washing cycle for shirts.
The main wash and the rinse gives best results thanks to the rotation
rhythms of the drum and to the water levels.
The programme has a maximum temperature of 40°C and concludes with
3 rinses and a short spin.
DRYING
Note: Dispensers used for concentrated powders and liquid
detergents must be removed from the drum before commencing the
tumble drying programmes.
The drum changes direction during the drying cycle to prevent the laundry
from tangling and hence produce even drying. Cool air is used during the
last ten minutes of the drying cycle to minimise creasing.
LOW HEAT
Low temperature drying programme for synthetics and mixed fibres,
always refer to the care label.
HIGH HEAT
High temperature drying programme for Cottons and linen items, always
refer to the care label
WASH'N DRY 59’
Rapid
When you only have a few items to wash and dry in a hurry, this 59
minute cycle is the ideal time saver!
Suitable for a light 1.5kg load size (e.g. 4 shirts) or slightly dirty
fabrics, this cycle will wash, rinse, spin and dry your garments in
under an hour.
We recommend that you reduce the detergent dosage when using
this programme to avoid wastage.
18
+
59 Min
Detergent drawer
P
The detergent drawer is split into 3 compartments:
- the compartment labelled "I" is for prewash detergent;
- the compartment labelled " " is for special additives,
fabric softeners, fragrances, starch, brighteners etc;
- the compartment labelled "II" is for main wash
detergent.
NOTE:
Some Detergents are Difficult to
utilise. Ensure to use an in drum
dispenser if recommended by
the detergent Manufacturer.
Note: only put liquid products in the compartment
labelled “
”. The machine is programmed to
automatically take up additives during the final rinse
stage for all wash cycles.
19
Detergents, washing aids and amounts to use
Choice of detergent
General purpose detergents
-
-
Powder detergents, for a thorough wash, with bleaching agent, particularly suitable for
use in hot wash programmes (60°C and over), for heavily soiled and stained laundry.
Liquid detergents, particularly suitable for grease stains, such as greasy skin marks,
cosmetics and oil.
These detergents are not suitable for washing stained laundry, as they do not contain
bleach.
Biological detergents, not all the products available give a really thorough wash.
Additional laundry aids
-
Water softener, means less detergent can be used where water hardness is classed as
hard to very hard.
Prewash substances, for the programmed treatment of stains prior to the main wash.
Using them means the subsequent wash can be at a low temperature or with bleach-free
detergents.
Fabric softener, prevents static build-up in synthetic fabrics and softens fabrics.
If you own a tumble dryer, clothes are softened even without the use of a fabric softener.
Do not put solvents in the washing machine!
Keep detergents and other laundry products out of children’s reach.
Before pouring in the detergent check that there are no foreign bodies in the detergent
drawer.
Dosage details are usually shown on the detergent packaging. Follow those instructions.
20
Dosages
Only use detergents which are suitable for use in a washing machine.
You will obtain the best results from your wash with the minimum use of chemical products
and the best care for your laundry if you take into consideration the degree of soiling as well
as the type of detergent to choose.
The amount of detergent to use depends on:
- water hardness: depending on the hardness of the water and the type of detergent used, it
is possible to reduce the amount of detergent.
- the degree of soiling: it is possible to reduce the amount of detergent used depending on
the degree of soiling.
- amount of laundry: it is possible to reduce the amount of detergent when washing only a
small amount of laundry.
Dosage for powder detergent
For normal and low concentration detergents: for normally soiled laundry choose a
programme without prewash.
Put the detergent in compartment “II” of the drawer.
For heavily soiled laundry, choose a programme with prewash.
Put 1/4 of the detergent in compartment “I”, 3/4 in compartment “II” of the drawer.
When using water softeners, first put in the detergent, then add the softener to compartment “II”.
For highly concentrated detergents not in single dose format, follow what is shown on pack
exactly as regards type and amount of dosage.
To avoid the difficulty of checking if the detergent has been taken up, use the dosage aids
provided in the detergent packaging.
Liquid detergent dosage
Liquid detergents may be used in accordance with the instructions on the relevant
packaging, for all programmes without prewash, by using the special container which is
placed in the drum or, for those models that have it, in the special insert for liquid detergents.
Recommendations on the use of detergent at various temperatures
When washing heavily soiled whites, we recommend using cotton programs of 60°C or above
and a normal washing powder (heavy duty) that contains bleaching agents that at medium/
high temperatures provide excellent results. For washes between 40°C and 60°C the type
of detergent used needs to be appropriate for the type of fabric and level of soiling. Normal
powders are suitable for “white” or colour fast fabrics with high soiling, while liquid detergents
or “colour protecting” powders are suitable for coloured fabrics with light levels of soiling.
For washing at temperatures below 40°C we recommend the use of liquid detergents or
detergents specifically labeled as suitable for low temperature washing. For washing wool or
silk, only use detergents specifically formulated for these fabrics. For dosage amounts please
follow the instructions on the detergent package label.
21
Useful advice for users
Tips on using your domestic appliance in the most environmentally-friendly and economical
way
Do a full load in your washing machine
To prevent any possible waste of energy, water or detergent we recommend that you put a
full load in your washing machine, not exceed the recommended maximum load size.
Up to 50% energy saving can be made with one full load compared to two half load washes
When is prewashing really needed?
Only with particularly dirty loads!
Energy savings of 5 to 15% are made by not selecting the prewash option for normal soiled
laundry.
Which wash temperature should you choose?
Using stain removers before machine washing reduces the need to wash at temperatures
over 60°C.
Energy savings of up to 50% can be made by using a 60°C wash temperature rather than
90°C
Before using a drying programme...
SAVE energy and time by selecting a high spin speed to reduce the water content in laundry
before using a drying programme.
22
Main wash
Sorting the laundry
-
It is recommended you wash only items which are machine washable with water and
detergent and not dry-clean items.
-
If you need to wash rugs, bedspreads or other heavy items, it is best not to spin them.
-
Sort the laundry according to fabric type, degree of soiling and wash temperature: Always
follow the wash care advice on the garment label for the most suitable care and
treatment of the laundry
Laundry for hot wash
Coloured, easy-care materials
Delicates and wool
Wash by hand
Items labelled with the following symbol are not suitable for machine washing:
Dry clean
For very delicate items, such as net curtains, underwear, tights etc., you are advised to
use a laundry net or wash bag.
Woollen items must be labelled with the "Pure New Wool" symbol to be washed in the
machine, and must also be labelled "non-matting" or "machine washable".
Colour often leaks from new coloured items.
This can then colour other lighter items being washed.
We therefore recommend that coloured items should be washed for the first time
separately.
For future washes, colourfast items can only be washed with whites up to 40°C.
-
Note: when sorting laundry
-
check there are no metal objects in the laundry
(such as paper clips, safety pins, pins, coins
etc...);
button up pillowcases, fasten zips, hook & eye
fasteners, belts and long dressing gown cords;
remove curtain hooks;
pay close attention to the labels on items
if you notice stubborn stains whilst sorting the
laundry, remove them using a special detergent or
a special stain remover.
- We recommend that you do not do a full load of towelling items only as these become too
heavy since they absorb a lot of water.
23
The correct way to wash
Preparing the laundry
A) Select the laundry.
Loading the laundry
B) Open the porthole.
C) Put the laundry in the washing machine.
Close the porthole again, ensuring that no items of
laundry are obstructing the lock.
Putting detergent in machine
D) Open the drawer, choose the detergent and put in
the correct amount, according to the manufacturer’s
instructions and the advice on page 20.
Add any other laundry aids (see page 20). Close the
drawer again.
Selecting the wash programme
Refer to the programme guide or the programme descriptions on the machine to select the
most suitable programme.
Turning the selector knob, the required programme is activated.
Adjust the wash temperature if necessary.
Press additional function buttons (if required).
Check that the tap is turned on and that the discharge hose is positioned correctly.
Press the "Start/Pause" button.
When the "Start/Pause" button is pressed the machine sets the working sequence in motion.
The programme carries out with the programme selector stationary on the selected
programme till cycle ends.
Warning: If there is any break in the power supply while the machine is operating, a special
memory stores the selected programme and, when the power is restored, it continues where
it left off.
When the programme is finished
The word “End” will appear on the display.
Wait for the door lock to be released (about 2 minutes after the programme has finished).
The "Door Security" indicator light will go out.
Switch off the machine by turning the programme selector on the “OFF” position. Open the
door and remove the laundry. Turn off the tap.
24
DRYING
DON’T DRY GARMENTS MADE FROM FOAM RUBBER
OR FLAMMABLE MATERIALS.
IMPORTANT:
THIS DRYER CAN ONLY BE USED FOR LAUNDRY
WHICH HAS BEEN WASHED AND SPIN DRIED.
WARNING:
Indications given are general, therefore some practice is needed for the best drying results.
We recommend setting a lower drying time than indicated, when first using, so as to
establish the degree of dryness required. We recommend not to dry fabrics that fray easily,
such as rugs or garments with a deep pile, to avoid air duct clogging.
The water is then conveyed to the drain circuit, wich is sealed and therefore, no steam can
be released outside.
Important
Never open the door after the drying cycle has begun wait until the cool down period provided for by the
cycle.
Only dry pre-spun laundry
The washer/dryer can perform two types of drying:
1 Cotton, terry towelling, linen, hemp fabrics, etc...
Advisory note
symbol on programme dial.
During drying phase the drum will accelerate to a higher speed to distribute the load
and to optimize the drying performance
2 Mixed fabrics (synthetics/cotton), synthetic fabrics
25
symbol on programme dial.
Automatic washing/drying
Warning: only a maximum 5 kg of dry laundry can be loaded
otherwise the dried laundry will be not satisfactory.
WASHING:
Open the drawer, choose the detergent and put in the correct amount.
Refer to the list of washing programmes according to fabrics to be washed (e.g. very dirty
cotton) and without pressing Start button, prepare wash as described:
Turning the selector knob, the required programme is activated.
The display will show the settings for the programme selected.
Adjust the wash temperature if necessary.
Press the option buttons (if required)
Check that the tap is turned on and that the discharge hose is positioned correctly.
DRYING:
Select the degree of dryness that you require.
This ranges from Extra Dry (
) for bath towels and bathrobes, through Cupboard Dry
(
) for items that will be put away without ironing, to iron dry (
) that leaves the
laundry suitable for ironing.
If you wish to select a timed drying cycle, press the “drying programme selection” button until
the required time indicator lights up.
Press the "Start/Pause" button.
When the "Start/Pause" button is pressed the machine sets the working sequence in motion.
The programme carries out with the programme selector stationary on the selected
programme till cycle ends.
At the end of the wash phase the display will shown the drying time remaining.
The washer-dryer will then complete the entire drying programme.
The drying programme indicator will be on until the cool down phase will begin and the
indicator “
” will go on.
When the programme is finished
The word “End” will appear on the display.
Wait for the door lock to be released (about 2 minutes after the programme has finished).
The "Door Security" indicator light will go out.
Switch off the machine by turning the programme selector on the “OFF” position. Open the
door and remove the laundry. Turn off the tap.
26
Drying cycle
The correct way to dry:
- Open door.
- Fill with up to 5 kg - in case of large items (e.g. sheets) or very absorbent items (e.g.
towels or jeans), it is a good idea to reduce the load.
- Close door.
- Turn programme dial to
cotton.
Select the degree of dryness that you require.
This ranges from Extra Dry (
) for bath towels and bathrobes, through Cupboard Dry
(
) for items that will be put away without ironing, to iron dry (
) that leaves the
laundry suitable for ironing.
If you wish to select a timed drying cycle, press the “drying programme selection” button
until the required time indicator lights up.
DOUBLE-SKIN DOOR
The appliance door is fitted with a protective shield to prevent
contact with the glass door which can reach high temperatures,
during the drying cycle.
It should not be necessary to remove the shield from the machine
during the normal course of use.
Warning: do not touch door for any reason.
‡0DNHVXUHZDWHULQOHWYDOYHLVRSHQ
‡0DNHVXUHZDWHUGUDLQLVFRUUHFWO\SRVLWLRQHG
Warning:
do not dry woollen garments or articles with special padding,
(e.g. quilts, quilted anoraks, etc.).
Delicate fabrics if garments are drip/dry, load less items ao as to
prevent creasing.
Press the START button.
The drying phase will begin with the programme dial fixed on the
the end of drying.
symbol until
The drying programme indicator will be on until the cool down phase will begin and the
indicator “
” will go on.
When the programme is finished
The word “End” will appear on the display.
Wait for the door lock to be released (about 2 minutes after the programme has finished).
The "Door Security" indicator light will go out.
Switch off the machine by turning the programme selector on the “OFF” position. Open the
door and remove the laundry. Turn off the tap.
27
Table of drying times (in minutes):
PROGRAMME
Extra
Cupboard
Iron
COTTON
MIXED
Min 1 Kg
Max 5 Kg
Min 1 Kg
Max 3,5 Kg
from 30’
from 30’
from 30’
to 230’
to 220’
to 170’
from 30’
from 30’
from 30’
to 170’
to 150’
to 80’
The time remaining shown on the digital display will show the time remaining for a
full load. However, this will be corrected during the cycle once the appliance
assesses the weight and dampness of the laundry.
USEFUL TIPS:
Do not dry unwashed items in the washer dryer.
Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol,
kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot
water with an extra amount of detergent before being dried in the washer dryer.
Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed
articles and clothes or pillows fitted with foam rubber pads should not be dried in the
washer dryer.
Fabric softeners, or similar products, should be used as specified by the fabric softener
instructions.
The final part of a washer dryer cycle occurs without heat (cool down cycle) to ensure that
the items are left at a temperature that ensures that the items will not be damaged.
WARNING:
Never stop a washer dryer before the end of the drying cycle unless all items are quickly
removed and spread out so that the heat is dissipated.
28
Cleaning and routine maintenance
Do not use alcohol-based scourers and / or thinners on the outside of your washing machine,
just a wipe with a damp cloth will suffice. The washing machine needs very little maintenance:
- Cleaning the drawer compartments.
- Cleaning the filter.
- Cleaning the door glass.
Cleaning the drawer compartments
Even if it is not strictly necessary, it is good to clean the
compartments for bleaching detergents and additives
occasionally.
A) To do this you just need to pull them out firmly, but without
forcing them.
B) Clean everything in the compartment under running water.
C) Put everything back in its proper place.
Cleaning the filter
The washing machine is fitted with a special filter for handling
large deposits which could block the discharge hose (coins,
buttons etc.) and which can, therefore, be easily retrieved.
We recommend that the filter be cleaned at least once a month.
The cleaning operation is as follows:
1) Before removing the filter, place an absorbent towel below
the filter cap to collect the small amount of water likely to
be inside the pump
2) Turn the filter anti-clockwise until it stops in the vertical
position.
Remove and clean.
3) After cleaning, replace by turning the notch on the end of
the filter clockwise.
Cleaning the door glass
Regularly clean the door glass with a damp cloth. A build up of
soiling and residues from the water may result in water leaking
from the door.
Do not use abrasive cleaners as they can scratch the surface.
Transporting the appliance or long
periods when appliance is not in use
If the appliance is being transported or is out of use for long
periods in unheated places, all remaining water must be
completely removed from the hoses.
Ensure mains power is off, then unclip the hose and point it
downwards into a basin until all the water has emptied
out.When finished, repeat the operation in the reverse order.
29
Investigating malfunctions
What might be the cause of…
Defects you can remedy yourself
MALFUNCTION CAUSE
REMEDY
1. Does not work on any
programme
Plug not in socket.
Not switched on.
Power failure.
Fuse blown.
Door open.
Plug it in.
Switch on.
Check.
Check.
Close door.
2. Does not fill with water
See cause 1.
Tap turned off.
Programme selector not correctly positioned.
Fill hoses are kinked
Check.
Turn on tap.
Position programme selector correctly.
Straighten fill hoses
3. Water does not drain away
Kink in discharge hose.
House drain is blocked
Odd material blocking filter
Straighten discharge hose.
Clean drain
Check filter
4. Water on floor around the
washing machine
Leaking gasket between tap and water inlet
hose.
House drain is blocked
Soap drawer blocked with soap residues
Replace gasket and tighten hose and tap
well.
Clean drain
Clean soap drawer
5. Does not spin
Water has not yet drained away.
"No spin" selected (certain models only).
Wait a few minutes for machine to empty.
Reset button or turn "no spin" knob.
6. Machine vibrates a lot
during spin
Washing machine not completely level.
Transit brackets not removed yet.
Load not distributed evenly.
Adjust the special adjustable feet.
Remove transit brackets.
Rearrange the laundry evenly.
7. Door will not open
Two minutes have not elapsed since the
programme finished.
Wait two minutes.
8. Display reads error
0, 1, 5, 7, 8, 9
–
9. Display reads error 2
No water fill.
Check water supplies are on.
10. Display reads error 3
No pump out.
Check drain is clear.
Check drain hose is not kinked.
11. Display reads
error 4
Machine overfilled with water.
Turn off water supply to machine.
Call service.
Call service.
During drying phase the drum will accelerate to a higher speed to distribute the load
and to optimize the drying performance
The machine makes a
different noise when
spinning! This is because it
has a brush motor for better
performance.
Only a small level of water can be
seen in the drum! This is because
new machines do not use much
water, yet achieve the same standard
of washing and rinsing.
30
Note:
The use of environmentally-friendly, phosphate-free detergents can have the following effects:
- waste water from rinsing may be cloudier because of the presence of zeolites held in
suspension, without the rinse performance being adversely affected;
- presence of white powder (zeolites) on laundry after washing, which is not absorbed by
the fabric and does not alter the colour of the fabric.
- The presence of foam in the final rinsing water is not necessarily an indication of poor
rinsing.
- Anionic surfactants used in washing detergent formulae often prove to be difficult to
remove from the laundry itself and, even in small quantities, can still cause considerable
foam production.
- Carrying out more rinse cycles does not serve any purpose in such cases.
CUSTOMER SERVICE AND GUARANTEE
Your new appliance is fully guaranteed by the manufacturer for 12 months against
electrical/mechanical breakdown excluding:
A. Any faults which occur due to bad installation or misuse of the machine.
B. Any faults which occur due to repair of, or interference with, the machine by any person
not authorised by the manufacturer to carry out service.
C. Any faults which arise from parts fitted to the machine which are not the manufacturers
original parts.
D. Any faults arising from non-domestic use or unusual or abnormal use of the machine.
E. Any faults arising from operation at an incorrect voltage.
F. Any faults arising from incorrect operation of the machine.
The guarantee applies to Gt. Britain and Northern Ireland only, and is an addition to your
statutory rights.
After Sales Service
If, having investigated the possible malfunctions on the chart on the previous page, you
believe the appliance is not working correctly, please call our After Sales Service dept. on
telephone number:
Gias Service
-
Tel: 08444 995599
Support Service
(Eire 0818 200021)
31
Fig. 2
Technical data
7 kg
5 kg
0,05 ÷ 0,8 MPa
Max. load of dry laundry
Max. load of dry laundry for drying
Water pressure
Measurements
Width
Depth
Height
60 cm
54 cm
82 cm
NB: For specifications regarding electrical data, see the data panel on the
front of the washing machine (porthole area) - as shown in diagram above.
Appliance complies with European Directives 73/23/EEC and 89/336/EEC, replaced by
2006/95/EC and 2004/108/EC, and subsequent amendments.
32
SETTING UP + INSTALLATION
1
Remove the polystyrene base and place the machine near
its permanent position (diagram 1).
Carefully cut through the hose retaining clip at the rear of
the appliance (diagram 2).
Remove the 3 fixing screws marked (A) and remove the 3
spacers marked (B) (diagram 3).
2
Remove the screw (C).
A spacer will fall inside the machine.
By tilting the machine, remove the above mentioned spacer.
Cover the 4 holes using the caps provided in the instruction
booklet pack (diagram 4).
3
4
WARNING:
DO NOT LEAVE THE PACKAGING WITHIN REACH OF CHILDREN AS IT IS A POTENTIAL
SOURCE OF DANGER.
Apply the insulation sheet of corrugated material to the base
as shown.
Use the 4 feet to level the machine with the floor:
a) Turn the nut clockwise to release the screw adjuster on the foot.
b) Rotate the foot to raise or lower it until it stands firmly on the
ground.
c) Lock the foot in position by turning the nut
anti-clockwise until it comes up against the bottom of the machine.
A
B
C
33
Note: we recommend you keep the screws to
immobilise the machine for future transit.
The Manufacturers will not be responsible for any
possible damage to the machine caused by not
following the rules relating to releasing the mechanism.
The user is responsible for all costs of installation.
Water connection
The appliance must be connected to the water mains using new
hose-sets.
The old hose-sets should not be re-used.
The machine has an inlet hose with 3/4" B.S.P threaded end
connection to attach between the threaded connector on the
appliance and the cold water supply.
This machine only uses cold water, therefore
only one hose is needed to connect to the cold
water supply. Do not connect to the hot supply.
Cold fill is an energy efficient system. Only the
water required for the washing is heated.There
is no loss of heat in the pipeline from a hot
water tank or boiler to the machine.
max 100 cm
min 4 cm
34
+2,6 mt max
min 50 cm
max 85 cm
Note: it is advisable to turn off the tap after each wash
to isolate the washing machine from the water supply.
The appliance must not be installed behind a lockable door, a sliding door or a door with a
hinge on the opposite side to that of the washer dryer.
For the washing machine to function properly the terminal end of the discharge hose (mouth)
must be at a minimum of 50 cm and a maximum of 85 cm from the ground.
ELECTRICAL CONNECTIONS
After installation, the appliance must be positioned so that the plug is accessible.
If the plug we supply does not fit
CUT IT OFF AND DESTROY IT!
You can’t use it on other appliances, and the exposed wires could be dangerous if plugged in.
To fit a replacement plug, proceed as follows:
Connect
to the terminal in the plug
green and yellow wire
marked with the letter E,
OR marked
with the symbol,
OR coloured green,
OR coloured green and yellow.
blue wire
marked N
OR coloured black.
brown wire
marked L
OR coloured red.
WARNING
This appliance must be earthed
Fuses and plugs
This appliance should be used only on a socket with a minimum rating of 13 Amp.
Our ready-fitted plug is already equipped with a 13 amp fuse which is BS 1362 ASTA
approved. Any replacement should be exactly the same.
If the fuse cover is lost, do not use the plug until it is replaced. A correct replacement fuse
cover (obtainable from your local retailer) must be the same colour as shown or named on
the insert on the base of the plug.
35
EN
GB
INSTRUCTIONS FOR
INSTRUCTIONS
FOR
MOUNTING DOOR
MOUNTING DOOR
Drill holes in the door
using
the cardboard
Drill holes
in the door
template
as indicated in
using the cardboard
Fig.
1 to mount
the hinges
template
as indicated
in
and
magnet
in
Fig. 1closure
to mount
the hinges
the
or left-hand
andright
closure
magnet in
position
to
the rightaccording
or left-hand
your
requirements.
position
accordingThe
to
position
of the hinges
your requirements.
The
refers
to of
thethe
upper
edge.
position
hinges
refers to the upper edge.
Screw the hinges in place
with
the
4 screws
Screw
the
hinges (A).
in place
Screw
on4 the
magnet
with the
screws
(A). (B)
with
screw
(C).
Screw
on the
magnet (B)
with screw (C).
Mount the plate (D) in the
right
or the
left-hand
position,
Mount
plate (D)
in the
according
to yourposition,
right or left-hand
requirements.
Place the
according to your
rubber
washersPlace
under
the
requirements.
the
plate
screwunder
in place
rubberand
washers
the
with
(G). in place
platescrew
and screw
Snapmount
cap (H) in the
with screw (G).
lower
position.
Snapmount
cap (H) in the
lower position.
IT
Mount the door with
Montare
porta with
hinges
byla
screwing
corredata
dithe
cerniere
screws
(L) to
front of
avvitando
lemachine.
viti (L) sul
the
washing
frontale della
lavabiancheria.
NOTE:
You are advised to
mount the door so that it
Nota: Ètowards
consigliabile
opens
the left, in
montare
porta con
il
the
samela
direction
as the
senso di apertura
washing
machine verso
load sx
comefor
è more
l’apertura
door
loading
dell’oblò per dare
space.
migliore spazio al
caricamento dei panni.
Slide the washing
machine into an opening
Incassare
la size.
of
adequate
lavabiancheria
vano
The
lower skirtingnel
may
be
di dimensioni
opportune.
applied
as preferred
but
Lo zoccolo
inferiore
può
within
the size
provided
essere applicato nel
for.
modo da voi preferito
entro le dimensioni
previste.
The four adjustable feet
allow the height of the
I 4 piedinimachine
regolabili
washing
to be
consentono
di820
variare
adjusted
from
mm
l’altezza
dellathe nuts
(by
removing
lavabiancheria
da 820
supplied
and substituting
mm (togliendo
dadi
with
5 mm nuts)i to
a in
dotazione
e sostituendoli
max.
840 mm
by raising
confeet
dadiand
altezza
5 mm)
the
blocking
the
a 840nut
mm
alzando
lock
to max,
the base
of i
piedini
ricordarsi di
the
plate.
bloccare il controdado
al fondo della lamiera.
The manufacturer declines all responsibility in the event of any printing mistakes in
this booklet. The manufacturer also reserves the right to make appropriate
modifications to its products without changing the essential characteristics.
This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic
Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste handling of this
product.
The symbol on the product indicates that this product may not be treated as household waste. Instead it shall
be handed over to the applicable collection point for the recycling of electrical and electronic equipment
Disposal must be carried out in accordance with local environmental regulations for waste disposal.
For more detailed information about treatment, recovery and recycling of this product, please contact your
local city office, your household waste disposal service or the shop where you purchased the product.
13.07 - 41039770 - Canon Italia - Business Services Channel - Printed in Italy - Imprimé en Italie
EN
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising