GE WLCD2050DWC Use and Care Manual

Add to My manuals
2 Pages

advertisement

GE WLCD2050DWC Use and Care Manual | Manualzz
GE Commercial Washer Warranty.
Coin-Operated and Smart Card-Operated Models
Parts and service are available from your General Electric
Commercial Laundry distributor.
Please have serial number and model number available
when calling for service.
For The Period Of:
We Will Replace:
Three Years
From the date of the
original purchase
Any part of the washer which fails due to a defect in materials or workmanship. During this
limited three-year warranty, you will be responsible for any labor and related service costs.
Fourth through
Fifth Year
From the date of the
original purchase
The outer tub and inner basket, if either of these parts should fail due to a defect in materials or
workmanship, and the cabinet side panels, base and cover, if they should fail due to rust-through.
During this limited additional two-year warranty, you will be responsible for any labor and related
service costs.
What Is Not Covered:
■ Coin drop meter, coin slide mechanism, coin vault and locks,
smart card modules and cards, smart card system accessories.
■ Any and all implied warranties of merchantability and fitness
for a particular purpose.
■ Service trips to your place of business to teach you how to
use the product.
■ Replacement of fuses or resetting of circuit breakers at place
of business.
■ Improper installation, delivery or maintenance.
■ Damage to the product caused by accident, fire, floods or
acts of God.
■ Failure of the product if it is abused, misused, or used for
other than the intended purpose.
■ Damage caused after delivery.
■ Incidental or consequential damage caused by possible
defects with this appliance.
■ Product not accessible to provide required service.
EXCLUSION OF IMPLIED WARRANTIES—Your sole and exclusive remedy is product repair as provided in this
Limited Warranty. Any implied warranties, including the implied warranties of merchantability or fitness for a
particular purpose, are limited to one year or the shortest period allowed by law.
This warranty is extended to the original purchaser and any succeeding owner for products purchased for commercial
use within the USA. If the product is located in an area where service by a GE Authorized Servicer is not available, you
may be responsible for a trip charge or you may be required to bring the product to an Authorized GE Service location
for service. In Alaska, the warranty excludes the cost of shipping to your place of business.
Some states do not allow the exclusion or limitation of incidental or consequential damages. This warranty gives you
specific legal rights, and you may also have other rights which vary from state to state. To know what your legal rights
are, consult your local or state consumer affairs office or your state’s Attorney General.
Warrantor: General Electric Company. Louisville, KY 40225
175D1807P549
49-90281
12-05 JR
AUTOMATIC WASHER
COMMERCIAL APPLICATION
GENERAL ELECTRIC WASHERS
GENERAL PRINCIPLES OF GOOD PRACTICE
(COIN-OPERATED MODELS ONLY)
In fulfilling the specific needs of different commercial installations the purchaser of this
General Electric automatic washer may wish to locate the coin box and controls in any of
a number of locations. The responsibility for the proper performance of this work lies
solely with the purchaser. It should be done by properly trained and qualified personnel,
and in accordance with local code requirements.
In addition, General Electric Company assumes no responsibility or liability whatsoever to
the purchaser for any patent infringement expenses, either in the form of damages or legal
costs, where the alleged infringement is based on a patent claim including one or more
components added by the purchaser (i.e. not supplied by General Electric Company with
the purchased washer).
Set forth below are some general principles which should be followed by persons installing
the coin box and controls in the desired location. This listing is not all-inclusive, and is
only intended to serve as a general guide. These principles are intended to supplement,
not modify, the Installation Instructions which accompany the automatic washer.
1. Any component added to the automatic washer, either electrically or mechanically,
should be properly grounded.
2. All current-carrying metal parts should be isolated from possible contact by the user.
3. All wiring should be properly protected from sharp edges, burrs, moving parts and other
agencies which might cause abrasion of the insulation on the conductors.
4. All electrical connections should be mechanically secure, and should provide adequate
and reliable electrical contact under conditions, such as vibration, to which they may be
subjected.
5. All electrical components, wires, and terminals should be of proper electrical rating for
the specific application.
6. All insulating materials should remain effective under the specific conditions to which
they will be exposed (e.g., humidity, temperature, etc.).
7. The installation should not be incompatible with the electrical circuit within the
automatic washer; nor in any manner, interfere with either the safety devices or the
sequence of operations of the cycle which are engineered into the appliance.
8. Uninsulated current-carrying metal parts should have adequate and ensured permanence
of spacing from other parts.

advertisement

Related manuals

advertisement