Garmin | zūmo® 595LM | Owner's Manual | Garmin zūmo® 595LM Owner's Manual

Garmin zūmo® 595LM Owner's Manual
zūmo 595
®
Owner’s Manual
© 2016–2018 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its
products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates
and supplemental information concerning the use of this product.
ANT , ANT+ , Garmin , the Garmin logo, TracBack , VIRB , and zūmo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. myGarmin™ and myTrends™
are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
®
®
®
®
®
®
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such marks by Garmin is under license. microSD™ is a trademark of SD-3C. Windows is a registered
trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Computer, Inc. PANDORA , the Pandora logo, and the Pandora trade dress are
trademarks or registered trademarks of Pandora Media, Inc. Used with permission. SPOTIFY and the Spotify logo are among the registered trademarks of Spotify AB. Compatible mobile digital
devices and premium subscription required, where available. Go to www.garmin.com. This product incorporates Spotify software which is subject to third party licenses found here:
www.spotify.com/connect/third-party-licenses . Soundtrack every journey with Spotify. Play songs and artists you love, or let Spotify entertain you.
®
®
®
®
®
This product is ANT+ certified. Visit www.thisisant.com/directory for a list of compatible products and apps.
®
Table of Contents
Installation...................................................................... 1
Mounting Your Device in a Motorcycle ....................................... 1
Powered Motorcycle Mount ................................................... 1
Installing the Handlebar Base ................................................ 1
Attaching the Base Plate to the Motorcycle Mount ................ 1
Attaching the Base Plate to the Handlebar Base ................... 1
Installing Your Device in the Motorcycle Mount ..................... 2
Removing Your Device from the Motorcycle Mount ................... 2
Mounting Your Device in an Automobile .................................... 2
Getting Started ............................................................... 2
Device Overview ......................................................................... 2
Installing the Battery ................................................................... 3
Product Updates ......................................................................... 3
Updating Maps and Software with Garmin Express .............. 3
Turning the Device On or Off ...................................................... 3
Acquiring GPS Signals ............................................................... 3
Status Bar Icons ......................................................................... 4
Using the On-Screen Buttons ..................................................... 4
Adjusting the Volume .................................................................. 4
Adjusting the Screen Brightness ................................................ 4
Transportation Modes ................................................................. 4
Choosing a Transportation Mode .......................................... 4
Using the On-Screen Keyboard .................................................. 4
Using the Large Button Keyboard .......................................... 4
Rider Awareness Features and Alerts .......................... 4
Enabling or Disabling Rider Alerts .............................................. 4
Red Light and Speed Cameras .................................................. 5
Viewing Helmet Law Notifications ............................................... 5
Searching for Helmet Laws .................................................... 5
Navigating to Your Destination..................................... 5
Routes ........................................................................................ 5
Starting a Route .......................................................................... 5
Changing the Route Calculation Mode .................................. 5
Taking a Route Using Adventurous Routing .......................... 5
Creating a Round-Trip Route ................................................. 5
Starting a Route by Using the Map ........................................ 6
Going Home ........................................................................... 6
Your Route on the Map ............................................................... 6
Active Lane Guidance ............................................................ 6
Viewing Turns and Directions ................................................ 6
Viewing the Entire Route on the Map .................................... 6
Adding a Location to Your Route ................................................ 6
Shaping Your Route ................................................................... 6
Taking a Detour .......................................................................... 7
Stopping the Route ..................................................................... 7
Trip Planner ................................................................................ 7
Planning a Trip ....................................................................... 7
Navigating to a Saved Trip ..................................................... 7
Optimizing the Order of Destinations in a Trip ....................... 7
Editing and Reordering Locations in a Trip ............................ 7
Editing and Saving Your Active Route ................................... 7
Changing Routing Options for a Trip ..................................... 7
Scheduling a Trip ................................................................... 7
Sharing Trips .......................................................................... 8
Using Suggested Routes ............................................................ 8
Avoiding Delays, Tolls, and Areas .............................................. 8
Avoiding Traffic Delays on Your Route .................................. 8
Avoiding Toll Roads ............................................................... 8
Avoiding Toll Stickers ............................................................. 8
Avoiding Road Features ........................................................ 8
Custom Avoidances ............................................................... 8
Navigating Off Road ................................................................... 8
Fuel Tracking .............................................................................. 8
Table of Contents
Enabling Fuel Tracking .......................................................... 9
Setting a Low Fuel Warning ................................................... 9
Resetting the Fuel Tank Mileage ........................................... 9
Enabling Dynamic Fuel Stops ................................................ 9
Finding and Saving Locations...................................... 9
Finding a Location Using the Search Bar ................................... 9
Viewing Search Results on the Map ........................................... 9
Changing the Search Area ......................................................... 9
Points of Interest ......................................................................... 9
Finding a Location by Category ............................................. 9
Searching Within a Category ................................................. 9
Navigating to Points of Interest Within a Venue .................. 10
Foursquare ........................................................................... 10
Search Tools ............................................................................. 10
Finding an Address .............................................................. 10
Finding an Intersection ......................................................... 10
Finding a City ....................................................................... 10
Finding a Location Using Coordinates ................................. 10
Viewing Recently Found Locations .......................................... 10
Clearing the List of Recently Found Locations .................... 10
Finding Your Last Parking Spot ................................................ 11
Viewing Current Location Information ...................................... 11
Finding Emergency Services and Fuel ................................ 11
Getting Directions to Your Current Location ........................ 11
Adding a Shortcut ..................................................................... 11
Removing a Shortcut ........................................................... 11
Saving Locations ...................................................................... 11
Saving a Location ................................................................ 11
Saving Your Current Location .............................................. 11
Editing a Saved Location ..................................................... 11
Assigning Categories to a Saved Location .......................... 11
Deleting a Saved Location ................................................... 11
Sharing a Saved Location .................................................... 11
Using the Map............................................................... 11
Map Tools ................................................................................. 12
Viewing a Map Tool ............................................................. 12
Enabling Map Tools ............................................................. 12
Up Ahead .................................................................................. 12
Viewing Upcoming Locations ............................................... 12
Customizing the Up Ahead Categories ................................ 12
Trip Information ......................................................................... 12
Viewing Trip Data from the Map .......................................... 12
Viewing the Trip Information Page ....................................... 12
Viewing the Trip Log ............................................................ 12
Resetting Trip Information .................................................... 12
Viewing Upcoming Traffic ......................................................... 12
Viewing Traffic on the Map .................................................. 13
Searching for Traffic Incidents ............................................. 13
Customizing the Map ................................................................ 13
Customizing the Map Layers ............................................... 13
Changing the Map Data Field .............................................. 13
Changing the Map Perspective ............................................ 13
Bluetooth Connected Features ................................... 13
Bluetooth Feature Requirements .............................................. 13
Pairing Your Phone and Headset ............................................. 13
Bluetooth Feature Status Icons ................................................ 14
Setting Up Bluetooth Features for Your Apple Device ............. 14
Connecting to the Smartphone Link App on Your Apple
Device .................................................................................. 14
Disabling Hands-Free Calling for Your Apple Device .......... 14
Disabling Smartphone Link Data and Smart Notifications for
Your Apple Device ............................................................... 14
Setting Up Bluetooth Features for Your Smartphone with
Android™ .................................................................................. 14
i
Connecting to the Smartphone Link App on Your Android
Smartphone ......................................................................... 14
Disabling Bluetooth Features for Your Smartphone with
Android ................................................................................. 14
Enabling or Disabling Bluetooth Features for Your Headset .... 14
Smartphone Link ....................................................................... 15
Downloading Smartphone Link ............................................ 15
Sending a Location from Your Phone to Your Device ......... 15
Garmin Live Services ................................................................ 15
Subscribing to Garmin Live Services ................................... 15
Smart Notifications .................................................................... 15
Receiving Notifications ......................................................... 15
Viewing the List of Notifications ........................................... 15
Hands-Free Calling ................................................................... 16
Placing a Call ....................................................................... 16
Receiving a Call ................................................................... 16
Using the Call History .......................................................... 16
Using In-Call Options ........................................................... 16
Saving a Home Phone Number ........................................... 16
Disconnecting a Bluetooth Device ............................................ 16
Deleting a Paired Phone ........................................................... 16
Traffic ............................................................................ 16
Receiving Traffic Data Using Smartphone Link ........................ 16
Enabling Traffic ......................................................................... 16
Using the Apps............................................................. 16
Setting Up LiveTrack Sharing and Inviting Viewers .................. 16
Starting a LiveTrack Session on Your Phone ...................... 17
Media Player ............................................................................. 17
Playing Media ...................................................................... 17
Adding the Media Player Tool to the Map ............................ 17
Changing the Media Source ................................................ 17
Pandora Service .................................................................. 17
Spotify .................................................................................. 17
Tracks ....................................................................................... 17
Viewing Track Information ................................................... 17
TracBack® ................................................................................ 17
Following Your Recent Track ............................................... 17
Saving Your Recent Track as a Trip .................................... 17
Tire Pressure ............................................................................ 17
Setting Up the Tire Pressure Sensors ................................. 18
Installing the Sensors on Your Tires .................................... 18
Tire Pressure Alerts ............................................................. 18
Tire Pressure Sensor Sleep Mode ....................................... 18
Using the Compass .................................................................. 18
VIRB® Remote ......................................................................... 18
Controlling a VIRB Action Camera ....................................... 18
Logging Service History ............................................................ 19
Adding Service Categories .................................................. 19
Deleting Service Categories ................................................ 19
Renaming Service Categories ............................................. 19
Deleting Service Records .................................................... 19
Editing a Service Record ..................................................... 19
Viewing Help Files .................................................................... 19
Searching Help Topics ......................................................... 19
Viewing the Weather Forecast .................................................. 19
Viewing Weather Near a Different City ................................ 19
Viewing the Weather Radar ................................................. 19
Viewing Weather Alerts ........................................................ 19
Checking Road Conditions .................................................. 19
photoLive Traffic Cameras ........................................................ 19
Saving a Traffic Camera ...................................................... 19
Viewing a Traffic Camera ..................................................... 19
Viewing Previous Routes and Destinations .............................. 20
Enabling Maps ..................................................................... 20
Navigation Settings ................................................................... 20
Calculation Mode Settings ................................................... 20
Setting a Simulated Location ............................................... 20
Bluetooth Settings .....................................................................20
Disabling Bluetooth .............................................................. 20
Display Settings ........................................................................ 20
Traffic Settings .......................................................................... 20
Units and Time Settings ............................................................ 20
Setting the Time ................................................................... 20
Language and Keyboard Settings ............................................ 21
Proximity Alerts Settings ........................................................... 21
Device and Privacy Settings ..................................................... 21
Restoring Settings .................................................................... 21
Device Information....................................................... 21
Specifications ............................................................................ 21
Charging the Device ................................................................. 21
Device Maintenance ..................................................... 21
Device Care .............................................................................. 21
Cleaning the Outer Casing ................................................... 21
Cleaning the Touchscreen ................................................... 21
Avoiding Theft ...................................................................... 21
Resetting the Device ................................................................. 22
Removing the Device, Mount, and Suction Cup ....................... 22
Removing the Device from the Mount .................................. 22
Removing the Mount from the Suction Cup ......................... 22
Removing the Suction Cup from the Windshield ................. 22
Changing the Fuse in the Vehicle Power Cable ....................... 22
Troubleshooting........................................................... 22
The suction cup will not stay on my windshield ........................ 22
My device is not acquiring satellite signals ............................... 22
The device does not charge in my vehicle ............................... 22
My battery does not stay charged for very long ........................ 22
My device does not appear as a removable drive on my
computer ................................................................................... 22
My device does not appear as a portable device on my
computer ................................................................................... 22
My device does not appear as either a portable device or a
removable drive or volume on my computer ............................. 22
My phone will not connect to the device ................................... 22
Appendix ....................................................................... 23
Installing a Memory Card for Maps and Data ........................... 23
Data Management .................................................................... 23
About Memory Cards ........................................................... 23
Connecting the Device to Your Computer ........................... 23
Transferring Data From Your Computer .............................. 23
Viewing GPS Signal Status ...................................................... 23
Purchasing Additional Maps ..................................................... 23
Purchasing Accessories ........................................................... 23
Index.............................................................................. 24
Customizing the Device............................................... 20
Map and Vehicle Settings ......................................................... 20
ii
Table of Contents
Installation
Mounting Your Device in a Motorcycle
Installing the Handlebar Base to the Clutch-Clamp or BrakeClamp Brackets
1 Remove the two factory bolts on your clutch-clamp or brakeclamp bracket À.
Powered Motorcycle Mount
WARNING
Garmin strongly recommends having an experienced installer
with the proper knowledge of electrical systems install the
device. Incorrectly wiring the power cable can result in damage
to the vehicle or the battery and can cause bodily injury.
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
®
The device must be mounted in a suitable and secure location
on your motorcycle, based on available power sources and safe
cable routing.
NOTE: Both 1/4 in. standard and M6 bolts are included.
Match the size of the factory bolts on your clutch-clamp or
brake-clamp bracket.
2 Thread the new bolts Á through the handlebar base, spacers
Â, and clutch-clamp or brake-clamp bracket.
3 Tighten the bolts to secure the base.
Attaching the Base Plate to the Motorcycle Mount
À
Á
Â
Motorcycle cradle
12 to 24 Vdc system power (red) with in-line fuse
System ground (black)
Motorcycle Mount Wiring Harness
NOTICE
Direct, sustained contact with the base plate, or any part of the
motorcycle, may damage the mount over time. To prevent this
kind of damage, you must place the mounting spacers between
the mount and base plate, and make sure that no part of the
device or mount touches the motorcycle.
1 Thread the M4 x 20 mm panhead screws À through the
washers Á, cradle, spacers Â, and base plate Ã.
À
Á
Â
Ã
Ä
Å
USB
12 to 24 Vdc system power (red) with in-line fuse
System ground (black)
2.5 mm microphone
3.5 mm stereo line-out audio
3.5 mm stereo line-in audio
Installing the Handlebar Base
The device includes parts for two handlebar installation
solutions. Custom mounts may require additional hardware.
2 Tighten the nuts to secure the base plate.
Attaching the Base Plate to the Handlebar Base
1 Align the ball of the handlebar base À and the ball of the
base plate Á with each end of the double-socket arm Â.
Installing the U-bolt and Handlebar Base
1 Place the U-bolt À around the handlebar Á, and thread the
ends through the handlebar base Â.
2 Tighten the nuts to secure the base.
NOTE: The recommended torque is 50 lbf-in (5.65 N-m). Do
not exceed torque of 80 lbf-in (9.04 N-m).
Installation
1
1 Plug the automotive power cable À into the port Á on the
mount.
2 Remove the clear plastic from the suction cup Â.
3 Clean and dry your windshield and the suction cup with a lintfree cloth.
4 Press the suction cup to the windshield, and flip the lever Ã
2
3
4
5
Insert each ball into the double-socket arm.
Tighten the knob slightly.
Adjust for optimal viewing and operation.
Tighten the knob to secure the mount.
Installing Your Device in the Motorcycle Mount
1 Fit the bottom of your device into the cradle.
5
6
7
8
back toward the windshield.
Snap the cradle Ä onto the suction cup arm.
Fit the bottom of your device into the cradle.
Tilt the device back until it snaps into place.
Plug the other end of the automotive power cable into a
power outlet.
Getting Started
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
• Install the battery (Installing the Battery, page 3).
• Update the maps and software on your device (Product
Updates, page 3).
• Mount the device and connect it to power (Installation,
page 1).
• Pair your Bluetooth phone and headset (Pairing Your Phone
and Headset, page 13) (optional).
• Acquire GPS signals (Acquiring GPS Signals, page 3).
• Adjust the screen brightness (Adjusting the Screen
Brightness, page 4).
• Navigate to your destination (Starting a Route, page 5).
®
2 Tilt the device back until it snaps into place.
3 If the latch on top of the mount stays up after you insert the
device, press it down.
Removing Your Device from the Motorcycle
Mount
Device Overview
1 Press the release button on the side of the mount.
2 Lift out the device.
Mounting Your Device in an Automobile
NOTICE
Before mounting the device, check the local laws pertaining to
windshield mounting.
WARNING
This product contains a lithium-ion battery. To prevent the
possibility of personal injury or product damage caused by
battery exposure to extreme heat, store the device out of direct
sunlight.
Do not use the suction cup mount on a motorcycle.
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
2
Getting Started
À
Á
Â
Ã
Power key
Mini-USB power and data port
Battery compartment with memory card slot for maps and data
Microphone
Installing the Battery
1 Rotate the battery cover D-ring counter-clockwise and
remove the battery cover.
4 In the Garmin Express application, click Add a Device.
The Garmin Express application searches for your device
and displays the device name and serial number.
5 Click Add Device, and follow the on-screen instructions to
add your device to the Garmin Express application.
When setup is complete, the Garmin Express application
displays the updates available for your device.
2 Locate the lithium-ion battery in the product box.
3 Insert the battery with its cable on top.
4 Insert the battery connector À into the battery port Á.
5 Close the battery cover and secure the battery cover D-ring.
Product Updates
On your computer, install Garmin Express™ (www.garmin.com
/express).
This provides easy access to these services for Garmin devices:
• Software updates
• Map updates
• Product registration
Updating Maps and Software with Garmin Express
You can use the Garmin Express application to download and
install the latest map and software updates for your device.
1 If you do not have the Garmin Express application installed
on your computer, go to garmin.com/express and follow the
on-screen instructions to install it.
2 Open the Garmin Express application.
3 Connect your device to your computer using a USB cable.
The small end of the cable connects to the USB port À on
your zūmo device, and the large end connects to an available
USB port on your computer.
Getting Started
6 Select an option:
• To install all available updates, click Install All.
• To install a specific update, click View Details, and click
Install next to the update you want.
The Garmin Express application downloads and installs the
updates onto your device. Map updates are very large, and
this process may take a long time on slower internet
connections.
NOTE: If a map update is too large for the internal storage of
the device, the software may prompt you to install a
microSD™ card in your device to add storage space (Installing
a Memory Card for Maps and Data, page 23).
7 Follow the on-screen instructions during the update process
to finish installing updates.
For example, during the update process, the Garmin Express
application may instruct you to disconnect and reconnect
your device.
Turning the Device On or Off
• To turn the device on, press the power key, or connect the
device to power.
• To put the device in power saving mode, press the power key
while the device is on.
While in power saving mode, the screen is off and the device
uses very little power, but it can wake instantly for use.
TIP: You can charge your device faster by putting it in power
saving mode while charging the battery.
• To turn off the device completely, hold the power key until a
prompt appears on the screen, and select Off.
The prompt appears after five seconds. If you release the
power key before the prompt appears, the device enters
power saving mode.
Acquiring GPS Signals
When you turn on your navigation device, the GPS receiver
must collect satellite data and establish the current location.
in the status bar indicates the satellite signal strength. The time
required to acquire satellite signals varies based on several
factors, including how far you are from the location where you
last used your navigation device, whether you have a clear view
of the sky, and how long it has been since you last used your
navigation device. The first time you turn on your navigation
device, it may take several minutes to acquire satellite signals.
1 Turn on the device.
3
2 Wait while the device locates satellites.
3 If necessary, go outdoors to an open area, away from tall
buildings and trees.
When
turns green, the device has acquired satellite signals
and is ready for navigation.
Status Bar Icons
The status bar is located at the top of the main menu. The status
bar icons display information about features on the device. You
can select some icons to change settings or view additional
information.
GPS signal status. Hold to view GPS accuracy and acquired
satellite information (Viewing GPS Signal Status, page 23).
Bluetooth technology status. Select to view the Bluetooth
settings (Bluetooth Settings, page 20).
Connected to hands-free calling. Select to place a phone call
(Hands-Free Calling, page 16).
Active vehicle profile. Select to view the vehicle profile
settings.
Current time. Select to set the time (Setting the Time,
page 20).
Battery charge level.
Connected to the Smartphone Link app. Select to view
connected device and subscription information (Pairing Your
Phone and Headset, page 13).
Temperature. Select to view the weather forecast (Viewing
the Weather Forecast, page 19).
Fuel status. Select to view fuel tracking information.
Using the On-Screen Buttons
On-screen buttons allow you to navigate the pages, menus, and
menu options on your device.
• Select
to return to the previous menu screen.
• Hold
to quickly return to the main menu.
• Select or to scroll through lists or menus.
• Hold or to scroll faster.
• Select
to see a context-based menu of options for the
current screen.
Adjusting the Volume
Before you can adjust the volume, you must connect your
device to a powered mount or a headset using Bluetooth
wireless technology.
1 Select Volume.
2 Select an option:
• Use the slider bar to adjust the volume.
• Select to mute the device.
• Select for additional options.
Adjusting the Screen Brightness
1 Select Settings > Display > Brightness.
2 Use the slider bar to adjust the brightness.
Transportation Modes
Routing and navigation are calculated differently based on your
transportation mode. The current transportation mode is
indicated by an icon in the status bar.
Automobile mode
Motorcycle mode
Off-road mode
4
Choosing a Transportation Mode
Select
.
Using the On-Screen Keyboard
See "Language and Keyboard Settings" to change the keyboard
layout (Language and Keyboard Settings, page 21).
• Select to delete a search entry.
• Select
to delete a character.
• Select to change the keyboard language mode.
• Select
to enter special characters, such as punctuation
marks.
• Select to change character capitalization.
Using the Large Button Keyboard
You can enable additional keyboard languages or layouts in the
language and keyboard settings (Language and Keyboard
Settings, page 21).
• Select or to view more characters.
• Select to switch to other keyboard languages and layouts.
Rider Awareness Features and Alerts
NOTICE
The rider alerts and speed limit features are for information only
and do not replace your responsibility to abide by all posted
speed limit signs and to use safe driving judgment at all times.
Garmin is not responsible for any traffic fines or citations you
receive for failing to follow all applicable traffic laws and signs.
Your device provides features that can help encourage safer
riding and increase efficiency, even when you are riding in a
familiar area. The device plays an audible tone or message and
displays information for each alert. You can enable or disable
the audible tone or message for each type of alert. Not all alerts
are available in all areas.
School zone or nearby school: The device plays a tone and
displays the distance to and speed limit (if available) for an
upcoming school or school zone.
Speed limit reduction: The device plays a tone and displays
the upcoming reduced speed limit so you can be prepared to
reduce your speed.
Speed limit exceeded: The device plays a tone and displays a
red border on the speed limit icon when you exceed the
posted speed limit for the current road.
Railroad crossing: The device plays a tone and displays the
distance to an upcoming railroad crossing.
Animal crossing: The device plays a tone and displays the
distance to an upcoming animal crossing area.
Curve: The device plays a tone and displays the distance to a
curve in the road.
Slower traffic: The device plays a tone and displays the
distance to slower traffic when you approach slower traffic at
a higher speed. Your device must be receiving traffic
information to use this feature (Receiving Traffic Data Using
Smartphone Link, page 16).
Fatigue warning: The device plays a tone and suggests
upcoming rest stops after you have been driving for more
than two hours without stopping.
Enabling or Disabling Rider Alerts
You can turn off individual audible rider alerts. Visual alerts
appears even when the audible alert is disabled.
1 Select Settings > Map & Vehicle > Audible Rider Alerts.
2 Select or clear the check box next to each alert.
Rider Awareness Features and Alerts
Red Light and Speed Cameras
NOTICE
Garmin is not responsible for the accuracy of or the
consequences of using a red light or speed camera database.
NOTE: This feature is not available for all regions or product
models.
Information about red light and speed camera locations is
available in some areas for some product models. Go to
garmin.com/speedcameras to check availability and
compatibility, or to purchase a subscription or one-time update.
You can purchase a new region or extend an existing
subscription at any time.
You can go to mygarmin.com to update the camera database on
your device. You should update your device frequently to
receive the most up-to-date camera information.
For some devices and regions, basic red light or speed camera
data may be included with your device. Included data does not
include updates or a subscription.
Viewing Helmet Law Notifications
Helmet law and eye protection notifications may appear on your
zūmo device the first time your device acquires satellites and
when your device approaches a location with motorcycle safety
rules.
NOTICE
Garmin recommends that all riders wear helmets for safety.
Helmet law notifications are for reference only, are subject to
change, and are not intended to be considered legal advice.
Helmet law notifications are available in the U.S. and Canada
only.
Select the notification to view more details.
Searching for Helmet Laws
You can search for helmet laws by state or province.
1 Select Apps > Helmet Guide.
2 Select a state or province.
Navigating to Your Destination
Routes
A route is a path from your current location to one or more
destinations.
• The device calculates a recommended route to your
destination based on the preferences you set, including the
route calculation mode (Changing the Route Calculation
Mode, page 5) and avoidances (Avoiding Delays, Tolls,
and Areas, page 8).
• The device can automatically avoid roads that are not
appropriate for the active vehicle profile.
• You can start navigating to your destination quickly using the
recommended route, or you can select an alternate route
(Starting a Route, page 5).
• If there are specific roads you need to use or avoid, you can
customize the route (Shaping Your Route, page 6).
• You can add multiple destinations to a route (Adding a
Location to Your Route, page 6).
Starting a Route
1 Select Where To?, and search for a location (Finding and
Saving Locations, page 9).
2 Select a location.
3 Select Go!.
Navigating to Your Destination
4 Select an option:
• To start navigating using the recommended route, select
Go!.
• To choose an alternate route, select , and select a route.
Alternate routes appear to the right of the map.
• To edit the course of the route, select > Edit Route, and
add shaping points to the route (Shaping Your Route,
page 6).
The device calculates a route to the location and guides you
using voice prompts and information on the map (Your Route on
the Map, page 6). A preview of the major roads in your route
appears at the edge of the map for several seconds.
If you need to stop at additional destinations, you can add the
locations to your route (Adding a Location to Your Route,
page 6).
Changing the Route Calculation Mode
1 Select Settings > Navigation > Calculation Mode.
2 Select an option:
• Select Faster Time to calculate routes that are faster to
drive but can be longer in distance.
• Select Adventurous Route to calculate routes that prefer
curvy roads.
• Select Off Road to calculate point-to-point routes (without
roads).
• Select Shorter Distance to calculate routes that are
shorter in distance but can take more time to drive.
Taking a Route Using Adventurous Routing
Your device can calculate routes that prefer curvy roads, hills,
and fewer highways. This feature can provide a more enjoyable
ride, but it may increase the time or distance to your destination.
NOTE: This feature is not available on all device models or for
all map regions.
1 Select Settings > Navigation > Calculation Mode >
Adventurous Route > Save.
2 Select Adventurous Route Settings.
3 Use the slider to include more or fewer curves.
4 Use the slider to include more or fewer hills.
5 Use the slider to include more or fewer highways.
6 Start a route (Starting a Route, page 5).
Creating a Round-Trip Route
The device can create a round-trip route using a specified
starting location and a distance, duration, or destination.
1 From the home screen, select Apps > Round Trip.
2 Select Start Location.
3 Select a location, and select Select.
4 Select Trip Attributes.
5 Select an option:
• Select Choose a Distance to plan your route by distance.
• Select Choose a Duration to plan your route based on
time.
• Select Choose a Destination to plan your route based on
a specified location.
6 Enter a distance, duration, or destination.
7 Select an option:
• If you entered a distance or duration, select Done >
Calculate.
• If you selected a destination, select Select.
8 Select a route, and select Go!.
5
Starting a Route by Using the Map
You can start route by selecting a location from the map.
1 Select View Map.
2 Drag and zoom the map to display the area to search.
3 If necessary, select to filter the displayed points of interest
by category.
Location markers ( or a blue dot) appear on the map.
4 Select an option:
• Select a location marker.
• Select a point, such as a street, intersection, or address
location.
5 Select Go!.
Going Home
The first time you start a route home, the device prompts you to
enter your home location.
1 Select Where To? > Go Home.
2 If necessary, enter your home location.
Editing Your Home Location
1 Select Where To? > > Set Home Location.
2 Enter your home location.
Your Route on the Map
As you travel, the device guides you to your destination using
voice prompts and information on the map. Instructions for your
next turn or exit, or other actions appear across the top of the
map.
À
Á
Â
Ã
Ä
Å
Æ
Ç
Next action in the route. Indicates the next turn, exit, or other action
and the lane in which you should travel, if available.
Distance to the next action.
Name of the street or exit associated with the next action.
Route highlighted on the map.
Next action in the route. Arrows on the map indicate the location of
upcoming actions.
Vehicle speed.
Name of the road on which you are traveling.
Estimated arrival time.
TIP: You can touch this field to change the information it shows
(Changing the Map Data Field, page 13).
Active Lane Guidance
As you approach a turn while navigating a route, a detailed
simulation of the road appears beside the map, if available. A
colored line À indicates the proper lane for the turn.
6
Viewing Turns and Directions
While navigating a route, you can view upcoming turns, lane
changes, or other directions for your route.
1 From the map, select an option:
• To view upcoming turns and directions as you navigate,
select > Turns.
The map tool displays the next four turns or directions
beside the map. The list updates automatically as you
navigate the route.
• To view the complete list of turns and directions for the
entire route, select the text bar at the top of the map.
Select
a turn or direction (optional).
2
Detailed information appears. An image of the junction may
appear for junctions on major roadways, if available.
Viewing the Entire Route on the Map
1 While navigating a route, select anywhere on the map.
2 Select .
Adding a Location to Your Route
Before you can add a location to your route, you must be
navigating a route (Starting a Route, page 5).
You can add locations to the middle or end of your route. For
example, you can add a fuel station as the next destination in
your route.
TIP: To create complex routes with multiple destinations or
scheduled stops, you can use the trip planner to plan, schedule,
and save a trip (Planning a Trip, page 7).
1 From the map, select > Where To?.
2 Search for a location (Finding and Saving Locations,
page 9).
3 Select a location.
4 Select Go!.
5 Select an option:
• To add the location as the next destination in your route,
select Add As Next Stop.
• To add the location to the end of your route, select Add
As Last Stop.
• To add the location and edit the order of destinations in
your route, select Add to Active Route.
The device re-calculates the route to include the added location
and guides you to the destinations in order.
Shaping Your Route
Before you can shape your route, you must start a route
(Starting a Route, page 5).
You can manually shape your route to change its course. This
allows you to direct the route to use a certain road or go through
a certain area without adding a destination to the route.
1 Touch anywhere on the map.
2 Select .
The device enters route shaping mode.
3 Select a location on the map.
Navigating to Your Destination
TIP: You can select to zoom in on the map and select a
more precise location.
The device recalculates the route to travel through the
selected location.
If
4 necessary, select an option:
• To add more shaping points to the route, select additional
locations on the map.
• To remove a shaping point, select .
5 When you are finished shaping the route, select Go!.
Taking a Detour
You can take a detour for a specified distance along your route
or detour around specific roads. This is useful if you encounter
construction zones, closed roads, or poor road conditions.
1 From the map, select > Change Route.
TIP: If the Change Route tool is not in the map tools menu,
you can add it (Enabling Map Tools, page 12).
2 Select an option:
• To detour your route for a specific distance, select Detour
by Distance.
• To detour around a specific road on the route, select
Detour by Road.
• To find a new route, select Detour.
Stopping the Route
From the map, select
> Stop.
Trip Planner
You can use the trip planner to create and save a trip, which you
can navigate later. This can be useful for planning a delivery
route, a vacation, or a road trip. You can edit a saved trip to
further customize it, including reordering locations, optimizing
the order of stops, adding scheduling information, and adding
shaping points.
You can also use the trip planner to edit and save your active
route.
Planning a Trip
A trip can include many destinations, and it must include at least
a starting location and one destination. The starting location is
the location from which you plan to start your trip. If you start
navigating the trip from a different location, the device gives you
the option to route to your starting location first. For a round trip,
the starting location and final destination can be the same.
1 Select Apps > Trip Planner > > Create Trip.
2 Select Select Start Location.
3 Choose a location for your starting point, and select Select.
4 Select Select Destination.
5 Choose a location for a destination, and select Select.
6 Select Add Location to add more locations (optional).
7 After you have added all the necessary locations, select Next
> Save.
8 Enter a name, and select Done.
Navigating to a Saved Trip
1 Select Apps > Trip Planner.
2 Select a saved trip.
3 Select Go!.
4 Select the first location to navigate to, and select Start.
The device calculates a route from your current location to
the selected location and then guides you to the remaining
trip destinations in order.
Navigating to Your Destination
Optimizing the Order of Destinations in a Trip
The device can automatically optimize the order of destinations
in your trip to create a shorter, more efficient route. The starting
location and final destination are not changed when you
optimize the order.
While editing a trip, select
> Optimize Order.
Editing and Reordering Locations in a Trip
1 Select Apps > Trip Planner.
2 Select a saved trip.
3 Select a location.
4 Select an option:
• To move the location up or down, select , and drag the
location to a new position in the trip.
• To add a new location after the selected location, select
.
• To remove the location, select .
Editing and Saving Your Active Route
If a route is active, you can use the trip planner to edit and save
your route as a trip.
1 Select Apps > Trip Planner > My Active Route.
2 Edit your route using any of the trip planner features.
The route recalculates each time you make a change.
3 Select Save to save your route as a trip, which you can
navigate again later (optional).
Changing Routing Options for a Trip
You can customize how the device calculates the route when
you start your trip.
1 Select Apps > Trip Planner.
2 Select a saved trip.
3 Select the vehicle profile icon, and select the vehicle you plan
to use while navigating the trip (optional).
4 Select > Trip Settings.
5 Select an option:
• To add shaping points to your trip, select Shape Route,
and follow the on-screen instructions (Shaping Your
Route, page 6).
• To change the calculation mode for the trip, select Route
Preference (Changing the Route Calculation Mode,
page 5).
When you start navigating the trip, the device automatically
switches to the selected vehicle profile.
Scheduling a Trip
You can add scheduling information to each location in your trip,
including the desired arrival time and layover duration at each
location. This can help you plan your departure to reach
locations in your trip on time.
1 Select Apps > Trip Planner.
2 Select a trip.
3 Select > Trip Settings > Edit Schedule.
4 Select a location, and follow the on-screen instructions to
enter the schedule information.
TIP: If you need to schedule multiple locations in the trip, you
should start from the beginning of the trip and work toward
the end.
5 Repeat step 4 to enter schedule information for additional
locations.
6 When finished, select Save.
When you navigate the trip, you should depart by the time
shown under the starting point to reach your stops and
destinations by the scheduled time. The schedule is an estimate
7
only. Traffic conditions, construction, and other delays may
affect your actual arrival times.
Sharing Trips
You can share trips with compatible Garmin devices using
Bluetooth wireless technology.
1 Place your device within 33 ft. (10 m) of a compatible Garmin
device.
2 Select Apps > Trip Planner > > Share > Bluetooth.
3 Select a trip and select Done.
4 Select a device from the list and select OK.
Using Suggested Routes
Before you can use this feature, you must save at least one
location and enable the travel history feature (Device and
Privacy Settings, page 21).
Using the myTrends™ feature, your device predicts your
destination based on your travel history, the day of the week,
and the time of day. After you have driven to a saved location
several times, the location may appear in the navigation bar on
the map, along with the estimated time of travel, and traffic
information.
Select the navigation bar to view a suggested route to the
location.
Avoiding Delays, Tolls, and Areas
Avoiding Traffic Delays on Your Route
Before you can avoid traffic delays, you must be receiving traffic
information (Receiving Traffic Data Using Smartphone Link,
page 16).
By default, the device optimizes your route to avoid traffic delays
automatically. If you have disabled this option in the traffic
settings (Traffic Settings, page 20), you can view and avoid
traffic delays manually.
1 While navigating a route, select > Traffic.
2 Select Alternate Route, if available.
3 Select Go!.
Avoiding Toll Roads
Your device can avoid routing you through areas that require
tolls, such as toll roads, toll bridges, or congestion areas. The
device may still include a toll area in your route if no other
reasonable routes are available.
1 Select Settings > Navigation.
2 Select an option:
NOTE: The menu changes based on your area and the map
data on your device.
• Select Toll Roads.
• Select Tolls and Fees > Toll Roads.
3 Select an option:
• To be asked each time before routing through a toll area,
select Always Ask.
• To always avoid tolls, select Avoid.
• To always allow tolls, select Allow.
4 Select Save.
Avoiding Toll Stickers
NOTE: This feature is not available in all areas.
The map data on your device may contain detailed toll sticker
information for some countries. You can avoid or allow toll
stickers for each country.
1 Select Settings > Navigation > Tolls and Fees > Toll
Stickers.
2 Select a country.
8
3 Select an option:
• To be asked each time before routing through a toll area,
select Always Ask.
• To always avoid tolls, select Avoid.
• To always allow tolls, select Allow.
Select
Save.
4
Avoiding Road Features
1 Select Settings > Navigation > Avoidances.
2 Select the road features to avoid on your routes, and select
Save.
Custom Avoidances
Custom avoidances allow you select specific areas or sections
of road to avoid. When the device calculates a route, it avoids
these areas and roads unless no other reasonable route is
available.
Avoiding a Road
1 Select Settings > Navigation > Custom Avoidances.
2 Select Add Avoid Road.
3 Select the starting point of the section of road to avoid, and
select Next.
4 Select the ending point of the road section, and select Next.
5 Select Done.
Avoiding an Area
Select Settings > Navigation > Custom Avoidances.
If necessary, select Add Avoidance.
Select Add Avoid Area.
Select the upper-left corner of the area to avoid, and select
Next.
5 Select the lower-right corner of the area to avoid, and select
Next.
The selected area is shaded on the map.
6 Select Done.
1
2
3
4
Disabling a Custom Avoidance
You can disable a custom avoidance without deleting it.
1 Select Settings > Navigation > Custom Avoidances.
2 Select an avoidance.
3 Select > Disable.
Deleting Custom Avoidances
1 Select Settings > Navigation > Custom Avoidances.
2 Select an option:
• To delete all custom avoidances, select .
• To delete one custom avoidance, select the avoidance,
and select
> Delete.
Navigating Off Road
If you are not following roadways as you navigate, you can use
Off Road mode.
1 Select Settings > Navigation.
2 Select Calculation Mode > Off Road > Save.
The next route will be calculated as a straight line to the
location.
Fuel Tracking
You can set your device to estimate your fuel usage, warn you
when you approach the maximum estimated fuel distance, and
suggest fuel stops based on your estimated fuel range. When
fuel tracking is enabled, indicates the current fuel status.
White: Fuel tracking is disabled, or the device is not connected
to the motorcycle mount.
Navigating to Your Destination
Green: The estimated fuel range is above the fuel tank warning
level.
Orange: The estimated fuel range is below the fuel tank warning
level.
Red: The estimated distance remaining on the tank is 0.
Enabling Fuel Tracking
Before you can enable fuel tracking, the device must be in
motorcycle mode or off road mode and placed in the motorcycle
mount.
When you enable fuel tracking, a fuel gauge appears on the trip
computer (Viewing the Trip Information Page, page 12).
1 Fill your fuel tank.
2 Select Apps > Fuel Settings > Fuel Tracking.
3 Select Distance Per Tank.
4 Enter the distance the vehicle travels on a tank of gas and
select Done.
Setting a Low Fuel Warning
You can set the device to warn you when the tank is low on fuel.
NOTE: The device must be connected to the motorcycle mount
to give low fuel warnings.
1 Enable fuel tracking (Enabling Fuel Tracking, page 9).
2 Select Fuel Tank Warning.
3 Enter a distance, and select Done.
When you have only enough fuel left to travel the distance you
entered, a low fuel warning appears on the map page.
Resetting the Fuel Tank Mileage
When you refill your fuel tank, you should reset the fuel tank
mileage on your device to more accurately track your remaining
fuel.
Select Apps > Fuel Settings > Reset Fuel Tank.
Enabling Dynamic Fuel Stops
Before you can enable dynamic fuel stops, the device must be in
motorcycle mode, placed in the motorcycle mount, and fuel
tracking must be enabled.
You can set the device to suggest fuel stops based on your
estimated fuel range.
Select Apps > Fuel Settings > Dynamic Fuel Stops.
Finding and Saving Locations
The maps loaded in your device contain locations, such as
restaurants, hotels, auto services, and detailed street
information. The Where To? menu helps you find your
destination by providing several methods to browse, search, and
save this information.
• Enter search terms to quickly search all location information
(Finding a Location Using the Search Bar, page 9).
• Browse or search pre-loaded points of interest by category
(Points of Interest, page 9).
• Search and check into Foursquare points of interest
(Searching Foursquare Points of Interest, page 10).
• Use search tools to find specific locations, such as
addresses, intersections, or geographic coordinates (Search
Tools, page 10).
• Search near a different city or area (Changing the Search
Area, page 9).
• Save your favorite locations to find them quickly in the future
(Saving Locations, page 11).
• Return to recently found locations (Viewing Recently Found
Locations, page 10).
®
Finding and Saving Locations
Finding a Location Using the Search Bar
You can use the search bar to search for locations by entering a
category, brand name, address, or city name.
1 Select Where To?.
2 Select Enter Search in the search bar.
3 Enter all or part of the search term.
Suggested search terms appear below the search bar.
4 Select an option:
• To search for a type of business, enter a category name
(for example, "movie theaters").
• To search for a business name, enter all or part of the
name.
• To search for an address near you, enter the house
number and street name.
• To search for an address in another city, enter the house
number, street name, city, and state.
• To search for a city, enter the city and state.
• To search for coordinates, enter latitude and longitude
coordinates.
5 Select an option:
• To search using a suggested search term, select the term.
• To search using the text you entered, select .
6 If necessary, select a location.
Viewing Search Results on the Map
You can view the results of a location search on the map instead
of in a list.
1 From the location search results, select .
The nearest location in your search results appears on the
map. indicates the locations of other search results.
2 Select one or more options:
• To view more search results, touch and drag the map.
• To select another location, select .
• To view details and routes for the selected location, select
the location description at the bottom of the map.
• To start navigation to the selected location, select Go!.
Changing the Search Area
By default, the device searches near your current location. You
can also search other areas, such as near your destination, near
another city, or along your active route.
1 From the main menu, select Where To?.
2 Select .
3 Select an option.
Points of Interest
A point of interest is a place that you may find useful or
interesting. Points of interest are organized by category and can
include popular travel destinations such as gas stations,
restaurants, hotels, and entertainment venues.
Finding a Location by Category
1 Select Where To?.
2 Select a category, or select Categories.
3 If necessary, select a subcategory.
4 Select a location.
Searching Within a Category
After you have performed a search for a point of interest, certain
categories may display a Quick Search list that shows the last
four destinations you selected.
1 Select Where To? > Categories.
9
2 Select a category.
3 Select an option:
• Select a destination from the quick search list on the right
side of the screen.
The quick search list provides a list of recently found
locations in the selected category.
• Select a subcategory, if necessary, and select a
destination.
Navigating to Points of Interest Within a Venue
You can create a route to a point of interest (POI) within a larger
venue, such as a store in a shopping mall or a specific terminal
in an airport.
1 Select Where To? > Enter Search.
2 Select an option:
• To search for the venue, enter the name or address of the
venue, select , and go to step 3.
• To search for the POI, enter the name of the POI, select
, and go to step 5.
3 Select the venue.
A list of categories appears below the venue, such as
restaurants, car rentals, or terminals.
4 Select a category.
5 Select the POI, and select Go!.
The device creates a route to the parking area or venue
entrance closest to the POI. When you arrive at the destination,
a checkered flag indicates the recommended parking area. A
labeled point indicates the location of the POI within the venue.
Exploring a Venue
You can view a list of all points of interest located within each
venue.
1 Select a venue.
2 Select > Explore this Venue.
Foursquare
Foursquare is a location-based social network. Your device
includes pre-loaded Foursquare points of interest, which are
indicated by the Foursquare logo in your location search results.
For additional features, you can connect to your Foursquare
account using Smartphone Link on your compatible smartphone.
When you connect to your Foursquare account using
Smartphone Link, you can view Foursquare location details,
check in to a location, and search for points of interest in the
online Foursquare database.
Searching Foursquare Points of Interest
You can search for Foursquare points of interest loaded on your
device. When you connect to your Foursquare account using
Smartphone Link, the search provides the most up-to-date
results from the online Foursquare database and customized
results from your Foursquare user account.
Select Where To? > Categories > Foursquare.
Connecting to Your Foursquare Account
1 Connect your device to Smartphone Link (Pairing Your
Phone and Headset, page 13).
2 On your smartphone, open the Smartphone Link app.
3 Open the Smartphone Link app settings, and select
Foursquare > Login.
4 Enter your Foursquare login information.
Viewing Foursquare Location Details
Before you can view Foursquare location details, you must
connect to a supported phone running Smartphone Link and log
in to your Foursquare account.
10
You can view detailed Foursquare location information, such as
user ratings, restaurant pricing information, and hours of
operation.
1 From the location search results, select a Foursquare point of
interest.
2 Select .
Checking in with Foursquare
Before you can check in with Foursquare, you must connect to a
supported phone running Smartphone Link and log in to your
Foursquare account.
1 Select Apps > Foursquare > Check In.
2 Select a point of interest.
3 Select > Check In.
Search Tools
Search tools allow you to search for specific types of locations
by responding to on-screen prompts.
Finding an Address
NOTE: The order of the steps may change depending on the
map data loaded on your device.
1 Select Where To?.
2 If necessary, select Searching Near to change the search
area (Changing the Search Area, page 9).
3 Select Address.
4 Follow the on-screen instructions to enter address
information.
5 Select the address.
Finding an Intersection
You can search for an intersection or junction between two
streets, highways, or other roads.
1 Select Where To? > Categories > Intersections.
2 Follow the on-screen instructions to enter street information.
3 Select the intersection.
Finding a City
1 Select Where To? > Categories > Cities.
2 Select an option:
• Select a city from the list of nearby cities.
• To search near another location, select Searching Near
(Changing the Search Area, page 9).
• To search for a city by name, select Enter Search, enter a
city name, and select .
Finding a Location Using Coordinates
You can find a location using latitude and longitude coordinates.
This can be helpful when geocaching.
1 Select Where To? > Categories > Coordinates.
2 If necessary, select , and change the coordinate format or
datum.
3 Enter the latitude and longitude coordinates.
4 Select View on Map.
Viewing Recently Found Locations
Your device stores a history of the last 50 locations you have
found.
Select Where To? > Recent.
Clearing the List of Recently Found Locations
Select Where To? > Recent >
> Clear > Yes.
Finding and Saving Locations
Finding Your Last Parking Spot
When you disconnect the device from vehicle power while the
device is on, your current location is saved as a parking spot.
Select Apps > Last Spot.
Viewing Current Location Information
You can use the Where Am I? page to view information about
your current location. This feature is helpful if you need to tell
emergency personnel your location.
From the map, select the vehicle.
Finding Emergency Services and Fuel
You can use the Where Am I? page to find the nearest
hospitals, police stations, and fuel stations.
1 From the map, select the vehicle.
2 Select Hospitals, Police Stations, Fuel, or Roadside
Assist.
NOTE: Some service categories are not available in all
areas.
A list of locations for the selected service appears, with the
nearest locations at the top.
3 Select a location.
4 Select an option:
• To navigate to the location, select Go!.
• To view the phone number and other location details,
select .
Getting Directions to Your Current Location
If you need to tell another person how to get to your current
location, your device can give you a list of directions.
1 From the map, select the vehicle.
2 Select > Directions to Me.
3 Select a starting location.
4 Select Select.
Adding a Shortcut
You can add shortcuts to the Where To? menu. A shortcut can
point to a location, a category, or a search tool.
The Where To? menu can contain up to 36 shortcut icons.
1 Select Where To? > Add Shortcut.
2 Select an item.
Removing a Shortcut
1 Select Where To? > > Remove Shortcut(s).
2 Select a shortcut to remove.
3 Select the shortcut again to confirm.
4 Select Save.
Saving Locations
Saving a Location
1 Search for a location (Finding a Location by Category,
2
3
4
5
page 9).
From the search results, select a location.
Select .
Select Save.
If necessary, enter a name, and select Done.
Saving Your Current Location
1 From the map, select the vehicle icon.
2 Select Save.
3 Enter a name, and select Done.
4 Select OK.
Using the Map
Editing a Saved Location
1 Select Where To? > Saved.
2 If necessary, select a category.
3 Select a location.
4 Select .
5 Select > Edit.
6 Select an option:
• Select Name.
• Select Phone Number.
• Select Categories to assign categories to the saved
location.
• Select Change Map Symbol to change the symbol used
to mark the saved location on a map.
7 Edit the information.
8 Select Done.
Assigning Categories to a Saved Location
You can add custom categories to organize your saved
locations.
NOTE: Categories appear in the saved locations menu after you
have saved at least 12 locations.
1 Select Where To? > Saved.
2 Select a location.
3 Select .
4 Select > Edit > Categories.
5 Enter one or more category names, separated by commas.
6 If necessary, select a suggested category.
7 Select Done.
Deleting a Saved Location
NOTE: Deleted locations cannot be recovered.
1 Select Where To? > Saved.
2 Select > Delete Saved Places.
3 Select the box next to the saved locations to delete, and
select Delete.
Sharing a Saved Location
After you save a location, you can share it with other compatible
Garmin devices using Bluetooth wireless technology or a
memory card.
1 Select Where To? > Saved.
2 If necessary, select a category.
3 Select a location.
4 Select .
5 Select > Share.
6 Follow the on-screen instructions to share location
information.
Using the Map
You can use the map to navigate a route (Your Route on the
Map, page 6) or to view a map of your surroundings when no
route is active.
1 Select View Map.
2 Touch anywhere on the map.
3 Select an option:
• Drag the map to pan left, right, up, or down.
• To zoom in or out, select or .
• To switch between North Up and 3-D views, select .
11
• To filter the displayed points of interest by category, select
.
• To start a route, select a location on the map, and select
Go! (Starting a Route by Using the Map, page 6).
Customizing the Up Ahead Categories
Map Tools
Map tools provide quick access to information and device
functions while you view the map. When you activate a map
tool, it appears in a panel at the edge of the map.
Stop: Stops navigation of the active route.
Change Route: Allows you to take a detour or skip locations in
your route.
Up Ahead: Displays upcoming locations along the route or the
road on which you are traveling (Up Ahead, page 12).
Turns: Displays a list of upcoming turns in your route (Viewing
Turns and Directions, page 6).
Trip Data: Displays customizable trip data, such as speed or
mileage (Viewing Trip Data from the Map, page 12).
Volume: Adjusts the master audio volume.
Brightness: Adjusts the screen brightness.
Phone: Displays a list of recent phone calls from your
connected phone, and displays in-call options while a phone
call is active (Using In-Call Options, page 16).
Traffic: Displays traffic conditions along your route or in your
area (Viewing Upcoming Traffic, page 12).
Weather: Displays weather conditions for your area.
photoLive: Displays live traffic cameras from your photoLive
subscription (photoLive Traffic Cameras, page 19).
Report Camera: Allows you to report a speed or red light
camera. This tool is available only when you have speed or
red light camera data on your device and you have an active
connection to the Smartphone Link app (Pairing Your Phone
and Headset, page 13).
Viewing a Map Tool
1 From the map, select
2 Select a map tool.
.
The map tool appears in a panel at the edge of the map.
When
you are done using the map tool, select .
3
Enabling Map Tools
By default, only the most commonly used map tools are enabled
in the map tools menu. You can add up to 12 tools to the menu.
1 From the map, select > .
2 Select the check box next to each tool to add.
3 Select Save.
Up Ahead
The Up Ahead tool provides information about upcoming
locations along your route or the road on which you are
traveling. You can view upcoming points of interest, such as
restaurants, fuel stations, or rest areas. When traveling on a
highway, you can also view information and available services
for upcoming exits and cities, similar to the information on
highway road signs.
You can customize three categories to show in the Up Ahead
tool.
Viewing Upcoming Locations
1 From the map, select > Up Ahead.
2 Select an option:
• To view the next upcoming location in each category,
select , if necessary.
• To view information and available services for upcoming
highway exits or cities, select .
12
NOTE: This option is available only while you are traveling
on a highway or when your route includes a highway.
3 Select an item to view a list of locations for that category,
exit, or city.
You can change the location categories that appear in the Up
Ahead tool.
1 From the map, select > Up Ahead.
2 Select a category.
3 Select .
4 Select an option:
• To move a category up or down in the list, select and drag
the arrow next to the category name.
• To change a category, select the category.
• To create a custom category, select a category, select
Custom Search, and enter the name of a business or
category.
5 Select Done.
Trip Information
Viewing Trip Data from the Map
Before you can view trip data on the map, you must add the tool
to the map tools menu (Enabling Map Tools, page 12).
From the map, select > Trip Data.
Customizing the Trip Data Fields
Before you can customize the data that appears in the trip data
map tool, you must add the trip data tool to the map tools menu
(Enabling Map Tools, page 12).
1 From the map, select > Trip Data.
2 Select a trip data field.
3 Select an option.
The new trip data field appears in the trip data map tool.
Viewing the Trip Information Page
The trip information page displays your speed and provides
statistics about your trip.
NOTE: If you make frequent stops, leave the device turned on,
so it can accurately measure elapsed time during the trip.
From the map, select Speed.
Viewing the Trip Log
Your device keeps a trip log, which is a record of the path you
have traveled.
1 Select Settings > Map & Vehicle > Map Layers.
2 Select the Trip Log check box.
Resetting Trip Information
1 From the map, select Speed.
2 Select > Reset Field(s).
3 Select an option:
• When not navigating a route, select Select All to reset
every data field except the speedometer, on the first page.
• Select Reset Trip Data to reset the information on the trip
computer.
• Select Reset Max. Speed to reset the maximum speed.
• Select Reset Trip B to reset the odometer.
Viewing Upcoming Traffic
You can view traffic incidents coming up along your route or
along the road on which you are traveling.
1 While navigating a route, select > Traffic.
Using the Map
The nearest upcoming traffic incident appears in a panel on
the right side of the map.
2 Select the traffic incident to view additional details.
Viewing Traffic on the Map
The traffic map shows color-coded traffic flow and delays on
nearby roads.
1 From the main menu, select Apps > Traffic.
2 If necessary, select > Legend to view the legend for the
traffic map.
Searching for Traffic Incidents
1 From the main menu, select Apps > Traffic.
2 Select > Incidents.
3 Select an item in the list.
4 If there is more than one incident, use the arrows to view
additional incidents.
Customizing the Map
Customizing the Map Layers
You can customize which data appear on the map, such as
icons for points of interest and road conditions.
1 Select Settings > Map & Vehicle > Map Layers.
2 Select the layers to include on the map, and select Save.
Changing the Map Data Field
1 From the map, select a data field.
NOTE: You cannot customize Speed.
2 Select a type of data to display.
Changing the Map Perspective
1 Select Settings > Map & Vehicle > Driving Map View.
2 Select an option:
• Select Track Up to display the map in two dimensions (2D), with your direction of travel at the top.
• Select North Up to display the map in 2-D with north at
the top.
• Select 3-D to display the map in three dimensions.
3 Select Save.
Bluetooth Connected Features
The device has several Bluetooth connected features for your
compatible smartphone. Some features require you to install the
Smartphone Link app on your smartphone. Go to garmin.com
/smartphonelink for more information.
Smart notifications: Displays phone notifications and
messages on your device. This feature is not available for all
languages and all smartphones.
LiveTrack: Allows you to share your ride location with contacts
on your smartphone or social media accounts.
Hands-free calling: Allows you to place and receive phone calls
using your device, and allows you to use the device as a
hands-free speaker phone.
Send locations to device: Allows you to send locations from
your smartphone to your navigation device.
Media streaming: Streams audio from your smartphone to your
headset and provides Bluetooth media controls on your zūmo
device.
Pandora internet radio: Streams music from Pandora internet
radio to your headset and allows you to change stations, view
artist and track information, change tracks, rate tracks, and
more on your zūmo device.
®
Bluetooth Connected Features
Spotify streaming music: Streams music from Spotify
streaming music service to your headset and allows you to
browse and play your music and playlists, view artist and
track information, rate tracks, and more on your zūmo device.
Foursquare check in: Allows you to check in to Foursquare
locations using your zūmo device.
Weather updates: Sends real-time weather conditions and
alerts to your device.
Garmin Live Services: Provides subscription-based services to
view live data on your device, such as traffic conditions,
parking, and advanced weather forecasts.
®
Bluetooth Feature Requirements
Some features require a phone, a headset, or a specific app on
your smartphone.
Feature
Requires
Smart notifications
Paired smartphone with the Smartphone Link
app.
LiveTrack
Paired smartphone with the Smartphone Link
app.
Hands free calling
Paired phone and headset. This feature is
compatible with either a paired Bluetooth
headset or wired headset.
Media streaming
Paired smartphone and headset. This feature
is compatible with either a paired Bluetooth
headset or wired headset.
Pandora internet radio Paired smartphone with the Pandora app.
Spotify streaming
music
Paired smartphone with the Spotify app.
Foursquare check in
Paired smartphone with the Smartphone Link
and Foursquare apps.
Weather updates
Paired smartphone with the Smartphone Link
app.
Garmin Live Services
Paired smartphone with the Smartphone Link
app.
Pairing Your Phone and Headset
You must pair your zūmo device with your phone and Bluetooth
headset to use several Bluetooth features. After the devices are
paired, they connect automatically when they are turned on and
within range.
Some features require the Smartphone Link app. You can
connect to the Smartphone Link app during the pairing process
or later.
1 On your phone, enable Bluetooth wireless technology, and
set the phone to be discoverable.
See your phone owner's manual for more information.
2 Place the zūmo device and your phone within 3 m (10 ft.) of
each other.
3 On the zūmo device, select Settings > Bluetooth > .
4 Follow the on-screen instructions to pair your phone with your
device.
5 On the zūmo device, select .
TIP: If the initial Bluetooth settings screen does not appear,
you can select Settings > Bluetooth > Search for Devices
to pair your headset.
6 Follow the on-screen instructions to pair your headset with
your device.
7 From the app store on your phone, install and open the
Smartphone Link app (optional).
If you are pairing with an Apple device, a security code
appears on the zūmo screen.
8 If necessary, enter the security code on your phone within 30
seconds.
®
13
Bluetooth Feature Status Icons
Status icons appear in the Bluetooth settings next to each paired
device.
Select Settings > Bluetooth.
• A gray icon indicates the feature is disabled or disconnected
for that device.
• A colored icon indicates the feature is connected and active
for that device.
Hands-free calling
Smart notifications
Smartphone Link features and services
Media streaming
Headset is connected
Setting Up Bluetooth Features for Your
Apple Device
By default, all compatible Bluetooth features are enabled when
you pair your phone. You can enable, disable, or customize
certain features.
Connecting to the Smartphone Link App on Your
Apple Device
Before you can connect to the Smartphone Link app, you must
pair and connect your zūmo device with your phone.
If you did not connect to the Smartphone Link app during the
pairing process, you can connect to it for additional Bluetooth
features. The Smartphone Link app communicates with your
phone using Bluetooth Smart technology. The first time you
connect to the Smartphone Link app on an Apple device, you
must enter a Bluetooth Smart security code.
1 From the app store on your phone, install the Smartphone
Link app.
2 On your phone, open the Smartphone Link app.
A security code appears on the zūmo device screen.
3 On your phone, enter the code.
Disabling Hands-Free Calling for Your Apple Device
You can disable hands-free calling and remain connected to
your phone for Smartphone Link data and notifications.
1 Select Settings > Bluetooth.
2 Select the phone name used for hands-free calling.
TIP: Your phone may connect to hands-free calling and data
using two different names. appears colored next to the
phone name used for hands-free calling.
3 Clear the Phone calls check box.
Disabling Smartphone Link Data and Smart
Notifications for Your Apple Device
You can disable Smartphone Link data and smart notifications
and remain connected to your phone for hands-free calling.
1 Select Settings > Bluetooth.
2 Select the phone name connected to Smartphone Link data
and notifications.
TIP: Your phone may connect to hands-free calling and data
using two different names. and appear blue next to the
phone name used for data and notifications.
3 Clear the Smartphone Services check box.
Showing or Hiding Notification Categories for Your Apple
Device
You can filter the notifications shown on your device by showing
or hiding categories.
1 Select Settings > Bluetooth.
14
2 Select the phone name connected to Smartphone Link data
and notifications.
TIP: Your phone may connect to hands-free calling and data
using two different names. and appear colored next to
the phone name used for data and notifications.
3 Select Smart Notifications.
4 Select the check box next to each notification to show.
Setting Up Bluetooth Features for Your
Smartphone with Android™
By default, all compatible Bluetooth features are enabled when
you pair your phone. You can enable, disable, or customize
certain features.
Connecting to the Smartphone Link App on Your
Android Smartphone
Before you can connect to the Smartphone Link app, you must
pair and connect your zūmo device with your phone.
If you did not connect to the Smartphone Link app during the
pairing process, you can connect to it for additional Bluetooth
features.
1 From the app store on your phone, install the Smartphone
Link app.
2 On your phone, open the Smartphone Link app.
Disabling Bluetooth Features for Your Smartphone
with Android
You can disable specific Bluetooth features and remain
connected to other features.
1 Select Settings > Bluetooth.
2 Select the phone name.
3 Select an option:
• To disable hands-free calling, clear the Phone calls check
box.
• To disable Smartphone Link data and smart notifications,
clear the Smartphone Link check box.
• To disable specific app notifications, use the settings in
the Smartphone Link app.
Showing or Hiding Notifications for Your Smartphone with
Android
You can use the Smartphone Link app to select which types of
notifications appear on your zūmo device.
1 On your phone, open the Smartphone Link app.
2 Select .
3 Verify the Smart Notifications check box is selected.
4 From the Notifications section, select Settings.
A list of notification categories and apps appears.
5 Select an option:
• To enable or disable a notification, select the toggle switch
next to the category or app name.
• To add an app to the list, select .
Enabling or Disabling Bluetooth Features for
Your Headset
By default, all compatible Bluetooth features are enabled when
you pair your headset. You can enable or disable certain
features.
1 Select Settings > Bluetooth.
2 Select the headset name.
3 Select an option:
• To disconnect the headset, clear the Headset check box.
Bluetooth Connected Features
• To disable audio from streaming media, clear the Media
Audio check box.
Smartphone Link
Smartphone Link is a phone application that allows you to
synchronize location data with your phone and access live
information using your phone data connection. Your device
transfers data from Smartphone Link using Bluetooth wireless
technology. Live information is available through free and
subscription-based plans from Garmin Live Services (Garmin
Live Services, page 15).
Saved locations and recently found locations are synchronized
with your phone each time your device connects to Smartphone
Link.
Downloading Smartphone Link
Smartphone Link is available for some smartphones. Go to
www.garmin.com/smartphonelink or see the application store for
your phone for compatibility and availability information.
Download Smartphone Link from the application store on
your supported phone.
See your phone owner's manual for information on
downloading and installing applications.
Sending a Location from Your Phone to Your Device
Smartphone Link is registered as a navigation application on
your phone.
1 From your phone, select the button to start navigating to a
location (see the owner's manual for your phone).
2 From the application menu, select Smartphone Link.
The next time you connect your device to your phone, the
location is transferred to the recently found items on your
device.
Garmin Live Services
Before you can use Garmin Live Services, your device must be
connected to a supported phone running Smartphone Link
(Pairing Your Phone and Headset, page 13).
Connecting to Smartphone Link provides access to Garmin Live
Services. Garmin Live Services provides free and subscriptionbased plans to view live data on your device, such as traffic
conditions and weather.
Some services, like weather, are available as separate apps on
your device. Other services, like traffic, enhance the existing
navigation features on your device. Features that require access
to Garmin Live Services display the Smartphone Link symbol
and appear only when the device is connected to Smartphone
Link.
Subscribing to Garmin Live Services
Before you can subscribe to Garmin Live Services, you must
install the Smartphone Link app on your phone.
1 Start the Smartphone Link app on your phone (Pairing Your
Phone and Headset, page 13).
2 Select My Account.
A list of services and subscription prices appears.
3 Select a service.
4 Select the price.
5 Select Subscribe.
6 Follow the on-screen instructions.
Smart Notifications
While your device is connected to the Smartphone Link app, you
can view notifications from your smartphone on your zūmo
device, such as text messages, incoming calls, and calendar
appointments.
Bluetooth Connected Features
NOTE: You may need to wait a few minutes to receive
notifications on your navigation device after it connects to the
Smartphone Link app. appears colored in the Bluetooth
settings when smart notifications are connected and active
(Bluetooth Feature Status Icons, page 14).
Receiving Notifications
NOTICE
Do not read or reply to notifications while driving.
Before your zūmo device can receive notifications, you must
connect it to your smartphone and to the Smartphone Link app.
From most pages, a popup appears when the device receives a
notification from your smartphone. If the device is moving, you
must verify you are a passenger and not the driver before you
can view notifications.
NOTE: If you are viewing the map, notifications appear in a map
tool.
• To ignore a notification, select OK.
The popup closes, but the notification remains active on your
phone.
• To view a notification, select View.
• To listen to the notification, select View > Play.
The device reads the notification using text-to-speech
technology. This feature is not available for all languages.
• To perform additional actions, such as dismissing the
notification from your phone, select View, and select an
option.
NOTE: Additional actions are available for only some
notification types and must be supported by the app
generating the notification.
Receiving Notifications while Viewing the Map
NOTICE
Do not read or reply to notifications while driving.
Before your zūmo device can receive notifications, you must
connect it to your smartphone and to the Smartphone Link app.
When you are viewing the map, new notifications appear in a
map tool at the edge of the screen. If the device is moving, you
must verify you are a passenger and not the driver before you
can view notifications.
• To ignore a notification, select .
The popup closes, but the notification remains active on your
phone.
• To view a notification, select the notification text.
• To listen to the notification, select Play Message.
The device reads the notification using text-to-speech
technology. This feature is not available for all languages.
• To perform additional actions, such as dismissing the
notification from your phone, select View, and select an
option.
NOTE: Additional actions are available for only some
notification types and must be supported by the app
generating the notification.
Viewing the List of Notifications
You can view a list of all active notifications.
1 Select Apps > Smart Notifications.
The list of notifications appears. Unread notifications appear
black, and previously read notifications appear gray.
2 Select an option:
• To view a notification, select the notification description.
• To listen to a notification, select .
15
The device reads the notification using text-to-speech
technology. This feature is not available for all languages.
Hands-Free Calling
NOTE: While most phones and headsets are supported and can
be used, it cannot be guaranteed that a particular phone or
headset can be used. All features may not be available for your
phone.
Using Bluetooth wireless technology, your device can connect to
your mobile phone and wireless headset or helmet to become a
hands-free device. To determine whether your device with
Bluetooth technology is compatible with your device, go to
www.garmin.com/bluetooth.
Calling Home
Before you can call home, you must enter a phone number for
your home location.
Select Apps > Phone > Call Home.
Disconnecting a Bluetooth Device
You can temporarily disconnect a Bluetooth device without
deleting it from the paired devices list. The Bluetooth device can
connect to your zūmo device automatically in the future.
1 Select Settings > Bluetooth.
2 Select the device to disconnect.
3 Clear the check box next to the name of your paired device.
Placing a Call
Deleting a Paired Phone
Dialing a Number
1 Select Apps > Phone > Dial.
2 Enter the number.
3 Select Dial.
You can delete a paired phone to prevent it from automatically
connecting to your device in the future.
1 Select Settings > Bluetooth.
2 Select the phone, and select Unpair device.
Calling a Contact in Your Phone Book
Your phone book is loaded from your phone to the device each
time your phone and the device connect. It may take a few
minutes for the phone book to be available. Some phones do
not support this feature.
1 Select Apps > Phone > Phone Book.
2 Select a contact.
3 Select Call.
Calling a Location
1 Select Apps > Phone > Browse Categories.
2 Select a point of interest.
3 Select Call.
Receiving a Call
When you receive a call, select Answer or Ignore.
Using the Call History
Traffic
NOTICE
Garmin is not responsible for the accuracy or timeliness of the
traffic information.
Traffic information may not be available in all areas or countries.
For information about traffic and coverage areas, go to
www.garmin.com/traffic.
• Traffic alerts appear on the map when there are traffic
incidents along your route or in your area.
• The device must be connected to Smartphone Link with an
active traffic subscription to receive traffic information.
Receiving Traffic Data Using Smartphone
Link
Your call history is loaded from your phone to the device each
time your phone and the device connect. It may take a few
minutes for the call history to be available. Some phones do not
support this feature.
1 Select Apps > Phone > Call History.
2 Select a category.
A list of calls appears, with the most recent calls at the top.
3 Select a call.
The Live Traffic service provides real-time traffic data.
1 Download Smartphone Link onto your compatible phone
(Downloading Smartphone Link, page 15).
2 Subscribe to the Live Traffic service (Subscribing to Garmin
Live Services, page 15).
3 Connect the device to the phone running Smartphone Link
(Pairing Your Phone and Headset, page 13).
Using In-Call Options
You can enable or disable traffic data.
1 Select Settings > Traffic.
2 Select the Traffic check box.
While on a call, you can select in-call options from the map.
• To transfer audio to your phone, select .
TIP: You can use this feature if you want to turn off your
device and remain on the call, or if you need privacy.
• To use the dial pad, select .
TIP: You can use this feature to use automated systems,
such as voice mail.
• To mute the microphone, select .
• To hang up, select .
Saving a Home Phone Number
TIP: After you save a home number, you can edit the home
number by editing “Home” in your list of saved locations (Editing
a Saved Location, page 11).
1 Select Apps > Phone > > Set Home Number.
2 Enter your phone number.
3 Select Done.
16
Enabling Traffic
Using the Apps
Setting Up LiveTrack Sharing and Inviting
Viewers
The first time you use the LiveTrack feature, you must set up the
feature and invite viewers.
1 Connect to Smartphone Link (Pairing Your Phone and
Headset, page 13).
2 On your smartphone, open the Smartphone Link app, and
select LiveTrack.
3 Enter a user name, and select Next.
4 Enter one or more contacts to invite.
You can enter either the contact name or email address.
Traffic
5 Select Start LiveTrack.
Changing Stations
The app starts sharing your LiveTrack data. Invited viewers
receive an email with a link to view your LiveTrack data.
6 Select to share the LiveTrack link using a social network,
messaging app, or other sharing app (optional).
1 Select Apps > Pandora®.
2 Select .
3 Select a station.
Starting a LiveTrack Session on Your Phone
Before you can start aLiveTrack session from your phone, you
must pair your phone with your device and connect to
Smartphone Link (Pairing Your Phone and Headset, page 13).
1 On your smartphone, open Smartphone Link.
2 Select LiveTrack.
3 Select a sharing option.
4 Select Start LiveTrack.
5 Follow the on screen instructions.
Spotify is a digital music service that gives you access to
millions of songs.
TIP: Spotify integration requires the Spotify application be
installed on your mobile phone. A compatible mobile digital
device and premium subscription is required, where available.
Go to www.garmin.com.
This product incorporates Spotify software which is subject to
third party licenses found here: www.spotify.com/connect/thirdparty-licenses . Soundtrack every journey with Spotify. Play
songs and artists you love, or let Spotify entertain you.
Media Player
Tracks
The media player can play music or audio from these sources.
• Music files stored on your zūmo device.
• Music files stored on a phone or media player connected to
the motorcycle mount USB port.
• Line-in audio connected to the motorcycle mount line-in audio
jack.
• Bluetooth audio from a paired phone.
• Pandora internet radio.
• Spotify streaming music service.
Playing Media
1 Select Apps.
2 Select an option:
• Select Pandora® to open the media player with the media
source set to Pandora.
• Select Spotify to open the media player with the media
source set to Spotify.
• Select Media Player to open the media player to the most
recently selected media source.
3 Select an option:
• To change the media source, select .
• To choose a track, station, playlist, or music file, select .
Adding the Media Player Tool to the Map
Spotify
A track is a recording of your path. The track log contains
information about the recorded path, including time, location,
and elevation information.
Viewing Track Information
1 Select Apps > Tracks > Active.
2 Select a track.
The track is displayed on the map.
3 Select .
4 Select an option:
• To save the track, select Save Track.
• To save the track as a trip, select Save as Trip.
• To view an elevation plot of the track, select Elevation
Profile.
TracBack
®
Following Your Recent Track
The TracBack feature records a track of your recent movement.
You can retrace your recent track back to where you started.
1 Select Apps > TracBack.
Your recent track appears on the map.
2 Select Go!.
Saving Your Recent Track as a Trip
The media player map tool enables you to control the media
player from your map.
1 Select Settings > Map & Vehicle > Map Tools > Media
Player.
2 Open the map.
3 Select > Media Player.
The media player controls appear on the map.
You can save your recent track as a trip, which you can navigate
later using the trip planner (Navigating to a Saved Trip, page 7).
1 Select TracBack.
Your recent track appears on the map.
2 Select > Save as Trip.
3 Enter a name, and select Done.
Changing the Media Source
Tire Pressure
You can change the source from which media is played on your
device.
1 Select Apps > Media Player > .
2 Select a media source.
Pandora Service
Pandora is free personalized radio that offers effortless and
endless music enjoyment and discovery. Pandora integration
requires a compatible mobile device with the Pandora
application installed. For more information on compatible mobile
devices visit www.pandora.com/everywhere/mobile.
NOTE: Pandora is currently available in the United States,
Australia, and New Zealand.
Using the Apps
WARNING
Use of the Tire Pressure Monitor System is not a substitute for
proper tire maintenance, and it is the driver's responsibility to
maintain correct tire pressure, even if under-inflation has not
reached the level to trigger the low tire pressure alert. Failure to
maintain proper tire pressure can result in loss of control of the
vehicle, which may lead to serious personal injury or death.
The Garmin Tire Pressure Monitor System is available as a
separate accessory. The tire pressure feature is not compatible
with all zūmo models. Go to www.garmin.com/zumo for
accessory and compatibility information.
17
Setting Up the Tire Pressure Sensors
Before you can set up the tire pressure sensors, you must have
the battery and the numerical stickers included with
each sensor. You also must have a compatible zūmo device.
The sensors communicate wirelessly with your compatible zūmo
device. You can monitor tire pressure and receive low-pressure
alerts on your zūmo device.
1 Remove the cap À from the sensor Á by rotating the cap
counter-clockwise.
metal tire valve stems may cause tire and/or tire valve stem
damage which could result in serious personal injury or death.
NOTICE
To prevent possible damage to the sensors or vehicle, ensure
each installed sensor does not interfere with the vehicle brakes,
suspension components, or other installed equipment. If an
installed sensor interferes with any installed equipment on the
vehicle, do not operate the vehicle with the sensor installed.
To prevent possible tire vibration or uneven tire wear on some
vehicles, it may be necessary to balance the vehicle tires after
installing the sensor.
Before you install the sensors on your tires, you should set up
the sensors with your zūmo device.
1 Remove the existing valve stem caps from your vehicle tires.
2 On your zūmo device, select Apps > Tire Pressure to view
the vehicle profile diagram.
3 Install the sensors onto the tire valve stems by tightening
them clockwise.
NOTE: You must install each sensor onto the correct tire
based on the vehicle profile diagram and the numerical
stickers affixed to the sensors during the setup process.
4 Rotate the wheels by hand to verify the sensors have
adequate clearance and do not interfere with vehicle
equipment.
2 If you have already installed the battery in the sensor,
3
4
5
6
7
remove the battery.
On your zūmo device, select Apps > Tire Pressure.
Select a vehicle profile that matches the tire configuration of
your vehicle.
Bring the sensor close to the zūmo device.
On your zūmo device, select the number next to the tire to
which the sensor will be paired.
Within 30 seconds, on the sensor, insert the battery  into
the battery holder à with the positive side facing up.
Tire Pressure Alerts
The device alerts you using pop-up messages, icons on the
map, and symbols in the tire pressure app.
When an alert exists for a sensor, the number next to the
corresponding tire appears red in the tire pressure app. The
symbols below the number appear red to indicate the active
alerts for that sensor.
Low tire pressure
Low sensor battery
Sensor not connected
Tire Pressure Sensor Sleep Mode
When you park your vehicle and turn off your zūmo device, the
tire pressure sensor enters a power-saving sleep mode after
several minutes. The sensor does not transmit information to the
zūmo device while in sleep mode. This can cause your zūmo
device to report the sensor is disconnected.
The next time your vehicle moves, the sensor exits sleep mode
and automatically reconnects to the zūmo device. It may take up
to 30 seconds to reconnect.
The zūmo device searches for the sensor and displays a
confirmation message when the sensor pairs successfully.
TIP: If the sensor does not pair successfully, you should
remove the sensor battery, and repeat steps 6 and 7.
8 Enter the recommended pressure for the tire.
9 Enter the minimum pressure for the tire.
The zūmo device triggers a low-pressure alert when the
sensor reports a tire pressure reading lower than this value.
10 Replace and fully tighten the cap on the sensor.
11 On the sensor, affix the numerical sticker that corresponds to
the tire number you selected in step 6.
12 Repeat this procedure for each remaining sensor.
Installing the Sensors on Your Tires
WARNING
The Tire Pressure Monitor System is for use with metal tire valve
stems only. Installation of the Tire Pressure Sensors on non18
Using the Compass
NOTE: You must be moving for the compass to determine your
direction.
You can navigate using a GPS compass.
Select Apps > Compass.
VIRB Remote
®
The VIRB remote function allows you to control your VIRB
action camera using your device. Go to www.garmin.com/VIRB
to purchase a VIRB action camera.
Controlling a VIRB Action Camera
Before you can use the VIRB remote function, you must enable
the remote setting on your VIRB camera. See the VIRB Series
Owner's Manual for more information.
1 Turn on your VIRB camera.
2 On your zūmo device, select Apps > VIRB Remote >
Connect.
Using the Apps
3 Wait while the device connects to your VIRB camera.
4 Select an option:
• Select Start Recording to record video.
• Select Stop Recording to stop recording video.
• Select Snapshot to take a photograph.
Logging Service History
You can log the date and odometer reading when service or
maintenance is performed on your vehicle. The device provides
several service categories, and you can add custom categories
(Adding Service Categories, page 19).
1 Select Apps > Service History.
2 Select a service category.
3 Select Add Record.
4 Enter the odometer reading, and select Next.
5 Enter a comment (optional).
6 Select Done.
Adding Service Categories
1 Select Apps > Service History.
2 Select > Add Category.
3 Enter a category name, and select Done.
Deleting Service Categories
When you delete a service category, all service records in the
category are also deleted.
1 Select Apps > Service History.
2 Select > Delete Categories.
3 Select the service categories to delete.
4 Select Delete.
Renaming Service Categories
1 Select Apps > Service History.
2 Select the category to be renamed.
3 Select > Rename Category.
4 Enter a name, and select Done.
Deleting Service Records
1 Select Apps > Service History.
2 Select a service category.
3 Select > Delete Records.
4 Select the service records to be deleted.
5 Select Delete.
Editing a Service Record
You can edit the comment, odometer reading, and date of a
service record.
1 Select Apps > Service History.
2 Select a category.
3 Select a field.
4 Enter the new information, and select Done.
Viewing Help Files
Select Apps > Help to view the full owner's manual.
Searching Help Topics
Select Apps > Help >
.
Viewing the Weather Forecast
Before you can use this feature, your device must be receiving
weather data. You can connect your device to the Smartphone
Link app to receive weather data (Pairing Your Phone and
Headset, page 13).
Using the Apps
1 Select Apps > Weather.
The device shows the current weather conditions and a
forecast for the next several days.
2 Select a day.
The detailed forecast for that day appears.
Viewing Weather Near a Different City
1 Select Apps > Weather > Current Location.
2 Select an option:
• To view weather for a favorite city, select a city in the list.
• To add a favorite city, select Add City, and enter a city
name.
Viewing the Weather Radar
Before you can use this feature, you must purchase Advanced
Weather service using Smartphone Link.
You can view an animated, color-coded radar map of current
weather conditions, as well as a weather icon on the map. The
weather icon changes to show weather in the vicinity, such as
rain, snow, and thunderstorms.
1 Select Apps > Weather.
2 If necessary, select a city.
3 Select > Weather Radar.
Viewing Weather Alerts
Before you can use this feature, you must purchase Advanced
Weather service using Smartphone Link.
While you are traveling with your device, weather alerts may
appear on the map. You can also view a map of weather alerts
near your current location or near a selected city.
1 Select Apps > Weather.
2 If necessary, select a city.
3 Select > Weather Alerts.
Checking Road Conditions
Before you can use this feature, you must purchase Advanced
Weather service using Smartphone Link.
1 Select Apps > Weather.
2 If necessary, select a city.
3 Select > Road Conditions.
photoLive Traffic Cameras
photoLive traffic cameras provide live images of traffic
conditions on major roadways and intersections. You can save
cameras that you plan to view regularly.
Saving a Traffic Camera
Before you can use this feature, you must subscribe to the
photoLive service, and your device must be connected to a
supported phone running Smartphone Link (Smartphone Link,
page 15).
This feature is not available in all areas.
1 Select Apps > photoLive.
2 Select Touch to Add.
3 Select a road.
4 Select an intersection.
5 Select Save.
Viewing a Traffic Camera
Before you can view a traffic camera, you must save a traffic
camera (Saving a Traffic Camera, page 19).
1 Select Apps > photoLive.
2 Select a camera.
19
Viewing Previous Routes and Destinations
Before you can use this feature, you must enable the travel
history feature (Device and Privacy Settings, page 21).
You can view your previous routes and places you have stopped
on the map.
Select Apps > Where I've Been.
Customizing the Device
Map and Vehicle Settings
Select Settings > Map & Vehicle.
Vehicle: Sets the icon that represents your position on the map.
Driving Map View: Sets the perspective on the map.
Map Detail: Sets the level of detail on the map. More detail may
cause the map to draw slower.
Map Theme: Changes the color of the map data.
Map Tools: Sets the shortcuts that appear in the map tools
menu.
Map Layers: Sets the data that appears on the map page
(Customizing the Map Layers, page 13).
Audible Rider Alerts: Enables an audible alert for each type of
rider alert (Rider Awareness Features and Alerts, page 4).
Auto Zoom: Automatically selects the zoom level for optimal
use of your map. When disabled, you must zoom in or out
manually.
myMaps: Sets which installed maps the device uses.
Enabling Maps
You can enable map products installed on your device.
TIP: To purchase additional map products, go to
http://buy.garmin.com.
1 Select Settings > Map & Vehicle > myMaps.
2 Select a map.
Navigation Settings
Select Settings > Navigation.
Route Preview: Shows a preview of the major roads in your
route when you start navigation.
Calculation Mode: Sets the route calculation method.
Off-Route Recalculation: Sets recalculation preferences when
navigating away from an active route.
Fatigue Warning: Alerts you when you have been driving for a
long period without a break.
Avoidances: Sets road features to avoid on a route.
Custom Avoidances: Allows you to avoid specific roads or
areas.
Toll Roads: Sets preferences for avoiding toll roads.
Tolls and Fees: Sets preferences for avoiding toll roads and toll
stickers.
NOTE: This feature is not available in all areas.
Restricted Mode: Disables all functions that require significant
operator attention and could become a distraction while
driving.
GPS Simulator: Stops the device from receiving a GPS signal,
and saves battery power.
Calculation Mode Settings
Select Settings > Navigation > Calculation Mode.
The route calculation is based on road speeds and vehicle
acceleration data for a given route.
Faster Time: Calculates routes that are faster to drive but can
be longer in distance.
20
Shorter Distance: Calculates routes that are shorter in distance
but can take more time to drive.
Off Road: Calculates a direct line from your location to your
destination.
Adventurous Route: Calculates routes that prefer curvy roads.
NOTE: This feature is not available in all areas.
Setting a Simulated Location
If you are indoors or not receiving satellite signals, you can use
the GPS to set a simulated location.
1 Select Settings > Navigation > GPS Simulator.
2 From the main menu, select View Map.
3 Tap the map twice to select an area.
The address of the location appears at the bottom of the
screen.
4 Select the location description.
5 Select Set Location.
Bluetooth Settings
Select Settings > Bluetooth.
Bluetooth: Enables Bluetooth wireless technology.
Search for Devices: Searches for nearby Bluetooth devices.
Friendly Name: Allows you to enter a friendly name that
identifies your device on other devices with Bluetooth
wireless technology.
Disabling Bluetooth
1 Select Settings > Bluetooth.
2 Select Bluetooth.
Display Settings
Select Settings > Display.
Color Mode: Allows you to select day or night color mode. If you
select the Auto option, the device automatically switches to
day or night colors based on the time of day.
Brightness: Allows you to adjust the display brightness.
Display Timeout: Allows you to set the amount of idle time
before your device enters sleep mode while using battery
power.
Screenshot: Allows you to take a picture of the device screen.
Screenshots are saved in the Screenshot folder of the device
storage.
Traffic Settings
Select Settings > Traffic.
Traffic: Enables traffic. The Smartphone Link app and a
subscription to live traffic service are required.
Units and Time Settings
To open the Units and Time settings page, from the main menu,
select Settings > Units & Time.
Current Time: Sets the device time.
Time Format: Allows you to select a 12-hour, 24-hour, or UTC
display time.
Units: Sets the unit of measure used for distances.
Position Format: Sets the coordinate format and datum used
for geographical coordinates.
Setting the Time
1 From the main menu, select the time.
2 Select an option:
• To set the time automatically using GPS information,
select Automatic.
Customizing the Device
• To set the time manually, drag the numbers up or down.
Language and Keyboard Settings
To open the Language and Keyboard settings, from the main
menu, select Settings > Language & Keyboard.
Voice Language: Sets the language for voice prompts.
Text Language: Sets all on-screen text to the selected
language.
NOTE: Changing the text language does not change the
language of user-entered data or map data, such as street
names.
Keyboard Language: Enables keyboard languages.
Proximity Alerts Settings
NOTE: You must have custom points of interest (POIs) loaded
for proximity points alerts to display.
NOTE: This feature is not available in all areas.
Select Settings > Proximity Alerts.
Audio: Sets the style of alert that plays when you approach
proximity points.
Alerts: Sets the type of proximity points for which alerts are
played.
Device and Privacy Settings
To open the device settings, select Settings > Device.
About: Displays the software version number, the unit ID
number, and information on several other software features.
EULAs: Displays the end-user license agreements.
NOTE: You need this information when you update the
system software or purchase additional map data.
Position Reporting: Shares your position information with
Garmin to improve content.
Travel History: Allows the device to record information for the
myTrends, Where I’ve Been, and Trip Log features.
Clear Travel History: Clears your travel history for the
myTrends, Where I’ve Been, and Trip Log features.
Restoring Settings
You can restore a category of settings or all settings to the
factory default values.
1 Select Settings.
2 If necessary, select a settings category.
3 Select > Restore.
Device Information
Specifications
From 3.5 V to 4.1 V
Radio frequency protocol
2.4 GHz ANT+ wireless communications
protocol (for VIRB Remote)
2.4 GHz ANT (for Tire Pressure Monitor
System)
®
®
*The device withstands incidental exposure to water of up to 1 m
for up to 30 min. For more information, go to www.garmin.com
/waterrating.
Charging the Device
NOTE: This Class III product shall be powered by an LPS power
supply.
You can charge the battery in the device using any of these
methods.
• Install the device in the mount, and connect the mount to
vehicle power.
NOTICE
Do not connect the device directly to the vehicle power cable.
• Connect the device to a computer using a USB cable.
The device may charge slowly when connected to a
computer. Some portable computers may not charge the
device.
• Connect the device to an optional power adapter accessory,
such as a wall power adapter.
You can purchase an approved Garmin AC-DC adapter
suitable for home or office use from a Garmin dealer or
www.garmin.com.
Device Maintenance
Device Care
NOTICE
Avoid dropping your device.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Never use a hard or sharp object to operate the touchscreen, or
damage may result.
Cleaning the Outer Casing
NOTICE
Avoid chemical cleaners and solvents that can damage plastic
components.
1 Clean the outer casing of the device (not the touchscreen)
using a cloth dampened with a mild detergent solution.
2 Wipe the device dry.
Water resistance
IEC 60529 IPX7
Operating temperature
range
From -20° to 55°C (from -4° to 131°F)
Charging temperature
range
From 0° to 45°C (from 32° to 113°F)
Power input (CLA,
motorcycle, or external
power)
From 12 to 24 Vdc
Power input (USB)
From 5 V ±0.25 V
Battery life
Up to 4 hr., depending on usage and
settings
Battery type
User-replaceable lithium-ion battery
Device Information
Battery voltage range
Cleaning the Touchscreen
1 Use a soft, clean, lint-free cloth.
2 If necessary, lightly dampen the cloth with water.
3 If using a dampened cloth, turn off the device and disconnect
the device from power.
4 Gently wipe the screen with the cloth.
Avoiding Theft
•
•
•
•
Remove the device and mount from sight when not in use.
Remove the residue left on the windshield by the suction cup.
Do not keep your unit in the glove compartment.
Register your device at http://my.garmin.com.
21
Resetting the Device
You can reset your device if it stops functioning.
Hold the power key for 12 seconds.
Removing the Device, Mount, and Suction
Cup
Removing the Device from the Mount
1 Press the release tab or button on the mount.
2 Tilt the device forward.
Removing the Mount from the Suction Cup
1 Turn the device mount to the right or left.
2 Apply pressure until the socket on the mount releases the
ball on the suction cup.
Removing the Suction Cup from the Windshield
1 Flip the lever on the suction cup toward you.
2 Pull the tab on the suction cup toward you.
Changing the Fuse in the Vehicle Power
Cable
NOTICE
When replacing the fuse, do not lose any of the small pieces
and make sure they are put back in the proper position. The
vehicle power cable does not work unless it is assembled
correctly.
If your device does not charge in your vehicle, you may need to
replace the fuse located at the tip of the vehicle adapter.
1 Rotate the end piece À counter clockwise to unlock it.
2
3
4
5
TIP: You may need to use a coin to remove the end piece.
Remove the end piece, the silver tip Á, and the fuse Â.
Insert a new fast-blow fuse that has the same current, such
as 1 A or 2 A.
Place the silver tip in the end piece.
Push in the end piece and rotate it clockwise to lock it back
into the vehicle power cable Ã.
Troubleshooting
The suction cup will not stay on my
windshield
1 Clean the suction cup and windshield with rubbing alcohol.
2 Dry with a clean, dry cloth.
3 Mount the suction cup (Installation, page 1).
My device is not acquiring satellite signals
• Verify the GPS simulator is turned off (Navigation Settings,
page 20).
• Take your device out of parking garages and away from tall
buildings and trees.
• Remain stationary for several minutes.
• Verify the vehicle is turned on and is supplying power to the
power outlet.
• Verify the interior temperature of the vehicle is within the
charging temperature range indicated in the specifications.
• Verify the fuse is not broken in the vehicle power outlet.
My battery does not stay charged for very
long
•
•
•
•
Decrease the screen brightness (Display Settings, page 20).
Shorten the display timeout (Display Settings, page 20).
Decrease the volume (Adjusting the Volume, page 4).
Disable Bluetooth wireless technology (Disabling Bluetooth,
page 20).
• Put the device in power saving mode when not in use
(Turning the Device On or Off, page 3).
• Keep your device away from extreme temperatures.
• Do not leave your device in direct sunlight.
My device does not appear as a removable
drive on my computer
On most Windows computers, the device connects using Media
Transfer Protocol (MTP). In MTP mode, the device appears as a
portable device and not as a removable drive. MTP mode is
supported by Windows 7, Windows Vista , and Windows XP
Service Pack 3 with Windows Media Player 10.
®
®
My device does not appear as a portable
device on my computer
On Mac computers and some Windows computers, the device
connects using USB mass storage mode. In USB mass storage
mode, the device appears as a removable drive or volume, and
not as a portable device. Windows versions prior to Windows XP
Service Pack 3 use USB mass storage mode.
®
My device does not appear as either a
portable device or a removable drive or
volume on my computer
1 Disconnect the USB cable from your computer.
2 Turn off the device.
3 Connect the USB cable to your device and to a USB port on
your computer.
TIP: The USB cable must connect to a USB port on your
computer, not to a USB hub.
The device turns on automatically and goes into MTP mode or
USB mass storage mode. A picture of the device connected to a
computer appears on the device screen.
NOTE: If you have several network drives mapped on your
computer, Windows may have trouble assigning drive letters to
your Garmin drives. For information about assigning drive
letters, see the help file for your operating system.
My phone will not connect to the device
• Select Settings > Bluetooth.
The Bluetooth field must be set to Enabled.
• Enable Bluetooth wireless technology on your phone and
bring your phone within 33 ft. (10 m) of the device.
• Go to www.garmin.com/bluetooth for more help.
The device does not charge in my vehicle
• Check the fuse in the vehicle power cable (Changing the
Fuse in the Vehicle Power Cable, page 22).
22
Troubleshooting
Appendix
Installing a Memory Card for Maps and Data
You can install a memory card to increase the storage space for
maps and other data on your device. You can purchase memory
cards from an electronics supplier, or go to www.garmin.com
/maps to purchase a memory card with pre-loaded Garmin
mapping software. The device supports microSD memory cards
from 4 to 32 GB.
1 Locate the map and data memory card slot on your device
(Device Overview, page 2).
2 Insert a memory card into the slot.
3 Press it in until it clicks.
Viewing GPS Signal Status
Hold
for three seconds.
Purchasing Additional Maps
1 Go to your device product page at garmin.com .
2 Click the Maps tab.
3 Follow the on-screen instructions.
Purchasing Accessories
Go to garmin.com/accessories.
Data Management
You can store files on your device. The device has a memory
card slot for additional data storage.
NOTE: The device is not compatible with Windows 95, 98, Me,
Windows NT , and Mac OS 10.3 and earlier.
®
About Memory Cards
You can purchase memory cards from an electronics supplier,
or purchase pre-loaded Garmin mapping software
(www.garmin.com). In addition to map and data storage, the
memory card can be used to store files such as maps, images,
geocaches, routes, waypoints, and custom POIs.
Connecting the Device to Your Computer
You can connect the device to your computer using a USB
cable.
1 Plug the small end of the USB cable into the port on the
device.
2 Plug the larger end of the USB cable into a port on your
computer.
A picture of your device connected to a computer appears on
the device screen.
Depending on your computer operating system, the device
appears as either a portable device, a removable drive, or a
removable volume.
Transferring Data From Your Computer
1 Connect the device to your computer (Connecting the Device
2
3
4
5
6
to Your Computer, page 23).
Depending on your computer operating system, the device
appears as either a portable device, a removable drive, or a
removable volume.
On your computer, open the file browser.
Select a file.
Select Edit > Copy.
Browse to a folder on the device.
NOTE: For a removable drive or volume, you should not
place files in the Garmin folder.
Select Edit > Paste.
Disconnecting the USB Cable
If your device is connected to your computer as a removable
drive or volume, you must safely disconnect your device from
your computer to avoid data loss. If your device is connected to
your Windows computer as a portable device, it is not necessary
to safely disconnect.
1 Complete an action:
• For Windows computers, select the Safely Remove
Hardware icon in the system tray, and select your device.
• For Mac computers, drag the volume icon to the trash.
2 Disconnect the cable from your computer.
Appendix
23
Index
Symbols
2-D map view 13
3-D map view 13
A
accessories 23
active lane guidance 6
addresses, finding 10
answering calls 16
audio, proximity points 21
avoidances
area 8
deleting 8
disabling 8
road 8
road features 8
tolls 8
B
battery
charging 21, 22
installing 3
maximizing 22
problems 22
Bluetooth technology 13, 14, 16, 22
disabling 20
disconnecting a device 16
pairing a headset 13
pairing a phone 13
settings 20
Bluetooth Technology 14
disabling calls 14
managing phones 14
brightness 4
C
F
files, transferring 23
finding locations. 9 See also locations
addresses 10
categories 9
cities 10
coordinates 10
intersections 10
Foursquare 10
fuel
stations 11
tracking 8, 9
fuse, changing 22
G
Garmin Express, updating software 3
Garmin Live Services 15
subscribing to 15
geocaching 10
going home 6
GPS 3, 23
H
hands-free phone calls 14
headset 14
pairing 13
helmet laws 5
help. 19 See also product support
home
calling 16
editing location 6
going 6
phone number 16
I
icons, status bar 4
ID number 21
intersections, finding 10
cables, motorcycle mount 1
calls 16
answering 16
contacts 16
dialing 16
history 16
home 16
placing 16
cameras
red light 5
speed 5
changing the search area 9
charging the device 21, 22
cleaning the device 21
cleaning the touchscreen 21
compass 18
computer, connecting 22, 23
coordinates 10
current location 11
customizing the device 20
K
D
M
deleting
paired Bluetooth device 16
service categories 19
service records 19
trips 7
destinations. See locations
detours 7
device care 21
dialing 16
directions 6
disconnecting, Bluetooth device 16
display settings 20
driving directions 6
E
editing, saved trips 7
emergency services 11
EULAs 21
24
keyboard 4
language 21
layout 21
L
language
keyboard 21
voice 21
latitude and longitude 10
LiveTrack 16, 17
locations 10, 20
calling 16
current 11
recently found 10
saving 11
searching for 9, 10
simulated 20
venues 10
low-fuel warning 9
map layers, customizing 13
map view
2-D 13
3-D 13
maps 6, 11, 12, 20
data field 6, 12, 13
detail level 20
layers 13
purchasing 23
symbols 6
theme 20
tools 12
updating 3
viewing routes 6
media player 17
memory card 2, 23
installing 23
microSD card 2, 23
motorcycle mount 1
cables 1
mount, removing 22
mounting the device
automobile 2
motorcycle 1
removing from mount 2, 22
suction cup 22
myTrends, routes 8
N
navigation 6, 10
off-road 8
settings 20
next turn 6
notifications 5, 14, 15
O
off-road navigation 8
on-screen buttons 4
P
pairing
disconnecting 16
headset 13
phone 13, 22
parking, last spot 11
phone
disconnecting 16
pairing 13, 22
phone book 16
phone calls 16
answering 16
dialing 16
muting 16
voice dial 16
points of interest (POI) 9, 10
venues 10
power cables 21
changing the fuse 22
power key 2, 3
product support 19
proximity points alerts, settings 21
Q
Quick Search 9
R
recently found locations 10
red light cameras 5
removing mount 22
resetting
device 22
trip data 12
restoring settings 21
rider alerts 4
road conditions, weather 19
routes 5
adding a point 6, 7
adventurous routing 5
calculating 5
calculation mode 5, 7, 20
myTrends 8
shaping 6
starting 5, 6
stopping 7
suggested 8
viewing on the map 6
S
satellite signals
acquiring 3
viewing 23
saved locations 7, 11
categories 11
deleting 11
editing 11
saving, current location 11
screen, brightness 4
screenshots 20
search bar 9
service history
categories 19
Index
deleting 19
editing 19
records 19
settings 20, 21
shaping a route 6
sharing, LiveTrack 16
shortcuts
adding 11
deleting 11
simulated locations 20
sleep mode 3, 18
Smartphone Link 14, 15
connecting 13, 14
disabling calls 14
Garmin Live Services 15
software
updating 3
version 21
specifications 21
speed cameras 5
Spotify 17
subscriptions, Garmin Live Services 15
suction cup 22
T
theft, avoiding 21
time settings 20
tire pressure
alerts 18
profiles 18
sensors 18
sleep mode 18
tolls, avoiding 8
tools, maps 12
TracBack 17
tracks 17
traffic 12, 16, 20
alternate route 8
cameras 19
incidents 13
map 13
searching for delays 13
traffic cameras, viewing 19
transportation modes 4
travel history 21
trip information 12
resetting 12
viewing 12
trip log, viewing 12
trip planner 7, 8
editing a trip 7
shaping points 7
troubleshooting 22
turn list 6
U
unit ID 21
up ahead 12
customizing 12
updating
maps 3
software 3
USB, disconnecting 23
V
venues 10
VIRB remote 18
volume, adjusting 4
W
weather 19
radar 19
road conditions 19
Where Am I? 11
Index
25
support.garmin.com
July 2018
190-02001-00_0B
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising