Garmin | Nexus | Owner's Manual | Garmin Nexus Navicontrol AP 203 Plus/303 Plus/3003 Plus autopilot to the Server

Garmin Nexus Navicontrol AP 203 Plus/303 Plus/3003 Plus autopilot to the Server
How to connect a Navicontrol AP 203 PLUS, 303 PLUS and
3003 PLUS autopilot to the Server.
Server:
Some of the calibration codes C79 - C93
have to be set to send:
GGL, RMB, RMC, APA, APB, BOD and XTE.
Navicontrol:
Please look in the manual how to activate the
autopilot to steer with GPS data as reference.
AP203, 303 and
3003 PLUS
PROCESSOR
BOX
TB1
1
2
In this connection you should be
able to steer the autopilot with
GPS data, such as BTW, XTE
etc, as reference.
You can not use wind as
steering reference.
+
1.
2.
+12 V
0V
3.
4
OUTPUT A
5.
6.
7.
8.
GREEN
YELLOW
WHITE
SCREEN
OUTPUT B
NMEA
The settings:
4
5
NETWORK
3
5.
NX2T7a
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising