Garmin | PS-A302B,Fusion,Panel-Stereo,AM/FM/BT/USB/AUX/LineOut,Bk,Rtl | Owner's Manual | Garmin PS-A302B,Fusion,Panel-Stereo,AM/FM/BT/USB/AUX/LineOut,Bk,OEM Owner's Manual

Garmin PS-A302B,Fusion,Panel-Stereo,AM/FM/BT/USB/AUX/LineOut,Bk,OEM Owner's Manual
FUSION
Panel-Stereo
®
OWNER’S MANUAL
®
ENGLISH
FUSIONENTERTAINMENT.COM
© 2018 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its
products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.fusionentertainment.com for
current updates and supplemental information concerning the use of this product.
Garmin , the Garmin logo, FUSION , and the Fusion logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without
the express permission of Garmin.
®
®
SM
Android™ is a trademark of Google™ Inc. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered
in the U.S. and other countries. The trademark iPhone is used in Japan with a license from Aiphone K.K. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of
such marks by Garmin is under license. Other trademarks and trade names are those of their respective owners.
®
®
®
Table of Contents
Getting Started
1
FUSION® Panel-Stereo Controls
FUSION Panel-Stereo USB Port
1
1
Connecting Devices
1
Connecting a Compatible Bluetooth Device to the Stereo
Connecting a Compatible USB Device to the Stereo
FUSION-Link Remote Control App
Connecting a Garmin® Watch to the Stereo
1
2
2
2
More Information
2
Installing a Different Language for the Voice Prompts
Specifications
Stereo Care
Registering Your FUSION Panel-Stereo
Troubleshooting
2
2
3
3
3
Index
4
Table of Contents
i
Getting Started
and
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
and
AUX: Press both keys to decrease the gain for
the connected source.
and
AUX: Press both keys to increase the gain for
the connected source.
and
FUSION Panel-Stereo Controls
®
Press and hold both keys to enable or disable
AUX2 input.
Press and hold both keys to switch the line out
volume between fixed and adjustable.
FUSION Panel-Stereo USB Port
Source
• Press to step through the available sources.
• Press and hold to put the stereo in Bluetooth
discoverable mode and pair with a Bluetooth
wireless device.
®
AM/FM
Preset 1
• Press and hold to save the current station as
preset 1.
• Press to select the saved preset station.
AM/FM
Preset 2
• Press and hold to save the current station as
preset 2.
• Press to select the saved preset station.
Information
• AM/FM: Press to hear the frequency and band
of the current station.
• USB/Bluetooth/AUX: Press to hear the source
name.
Power
• Press to turn on the stereo.
• Press to turn off the stereo.
• Press and hold for 10 seconds to reset the
stereo.
Back
• AM/FM: Press to tune to the previous station.
• USB/Bluetooth: Press to skip to the previous
track.
• USB: Press and hold to rewind the current
track (compatible Apple devices only).
®
Play/Pause
• AM/FM/AUX: Press to mute.
• USB/Bluetooth: Press to pause.
Forward
• AM/FM: Press to tune to the next station.
• USB/Bluetooth: Press to skip to the next track.
• USB: Press and hold to fast forward the
current track (compatible Apple devices only).
Volume
Decrease
• Press to decrease the volume.
• Press and hold to quickly decrease the
volume.
Volume
Increase
• Press to increase the volume.
• Press and hold to quickly increase the
volume.
and
AM/FM: Press and hold both keys to change the
AM/FM tuner region.
NOTICE
Changing the tuner region erases all radio
station presets.
NOTE: The tuner has been set to the North
America tuner region. If you purchase or use the
stereo in a different region, you must change the
tuner region.
and
and
Getting Started
• Press both keys to hear the current version of
software.
• Press and hold both keys to update the stereo
software from USB (For software upgrade
instructions, go to
www.fusionentertainment.com).
Press and hold both keys to enable or disable
AUX1 input.
USB port for your mobile device connection or a low-profile USB
flash drive. Charges your mobile device.
Weather cap. When properly closed, this cap provides a cover that
is water resistant to IPX5.
Connecting Devices
Connecting a Compatible Bluetooth Device
to the Stereo
You can play media from a compatible Bluetooth device using
the Bluetooth wireless connection.
You can control the music playback with the media app on a
Bluetooth device or using the FUSION-Link™ remote control app.
For information about the FUSION-Link app for compatible
Apple or Android™ devices, go to the Apple App Store or the
Google Play™ store.
1 Enable Bluetooth on your compatible Bluetooth device.
2 Bring the compatible Bluetooth device within 10 m (33 ft.) of
the stereo.
3 On the stereo, press and hold until you hear Discoverable
and flashes blue.
The stereo remains discoverable for two minutes.
4 On your compatible Bluetooth device, select Panel-Stereo
from the list of discovered devices.
turns solid blue when the device is connected to the
stereo.
5 If your compatible Bluetooth device does not connect to the
stereo, repeat the above steps.
6 If you want to stream Bluetooth audio, select the Bluetooth
source on the stereo.
NOTE: The FUSION-Link app works for any audio source,
but you must select the Bluetooth source on the stereo to
stream audio.
7 Play music using your Bluetooth device.
NOTE: remains solid blue when a Bluetooth device is
connected to the stereo, regardless of the selected source.
Immediately after the stereo is turned on, it connects
automatically to the last connected device when it is within
range and Bluetooth wireless technology is enabled.
You can connect a previously paired Bluetooth device by
selecting Panel-Stereo from the Bluetooth device's list of
previously paired devices.
SM
1
Connecting a Compatible USB Device to the
Stereo
You can connect a compatible USB flash drive, compatible
Apple device, or compatible Android AOA device to the USB
port to play music and charge compatible Apple or Android
devices.
The FUSION-Link remote control app is required to navigate
folders on the USB flash drive. When using a USB flash drive
without the FUSION-Link app, the stereo plays music files saved
in the root directory by default. If the FUSION-Link app has been
previously used to navigate to a different folder on the USB
drive, the stereo plays music files from the last folder navigated
to.
When using a USB flash drive, the file load time varies based on
size of the flash drive and the number of files on the flash drive.
1 Connect the USB flash drive or the USB cable included with
your media player to the USB port on the stereo.
2 If you want to stream Bluetooth audio, select the Bluetooth
source on the stereo.
NOTE: The FUSION-Link app works for any audio source,
but you must select the Bluetooth source on the stereo to
stream audio.
3 Play music using the connected USB device.
When an unsupported USB device is connected, the stereo
beeps to indicate the error.
One beep
Unsupported hub attached
Two beeps
Unsupported USB device attached
Three beeps Device not responding
Four beeps
Unsupported USB device attached that exceeds the 1 A
charging rating of the stereo
USB Flash Drive Size
The weather cap should be sealed on the device to avoid
corrosion.
To ensure the weather cap can be properly inserted and locked,
you must use a low profile USB flash drive that is no longer than
22 mm (0.86 in.), measuring from end to end.
The optional FUSION MS-USB16 accessory is a low-profile,
16 GB flash drive, and is the correct size to allow the weather
cap to be closed and sealed.
For more information about the watch, see the watch manual at
www.garmin.com/manuals.
1 Following the instructions in the watch manual, install the
FUSION-Link Lite™ app from the Connect IQ™ store onto the
watch.
2 On the stereo, press and hold until you hear Discoverable
and flashes blue.
The stereo remains discoverable for two minutes.
3 Bring the watch within 3 m (10 ft.) of the stereo.
NOTE: Stay 10 m (33 ft.) away from other ANT devices
while pairing.
4 Open the FUSION-Link Lite app on the watch.
The first time you open the app on the watch, the watch
automatically pairs with and connects to the stereo. If you
need to pair to another stereo, in the FUSION-Link Lite app,
select Settings > Pair new.
5 Control the audio playback using the FUSION-Link Lite app
on the watch.
After the devices are paired, they connect automatically when
they are turned on, within range, and the app is open on the
watch.
®
More Information
Installing a Different Language for the Voice
Prompts
You can change the language of the voice prompts. Choose
from English, Dutch, French, German, Italian, Spanish,
Japanese, and Chinese.
1 Go to www.fusionentertainment.com.
2 Follow the on-screen instructions.
Specifications
Ingress protection rating*
IEC 60529 IP65
Dimensions with trim (W × 344 x 155 x 50 mm (13.54 x 6.1 x 1.97 in.)
H × D)
Weight
1.15 kg (2.54 lb.)
Operating temperature
range
From 0° to 50°C (from 32° to 122°F)
Long-term storage
temperature range
From -20° to 70°C (from -4° to 158°F)
Bluetooth wireless range
Up to 10 m (33 ft.)
Bluetooth profiles
A2DP, AVRCP, SPP
Bluetooth version
4.1
ANT wireless range
Up to 3 m (10 ft.)
Input voltage
From 10.8 to 16.0 Vdc
Current (max.)
10 A
You can use the FUSION-Link remote control app on your
compatible Apple or Android device to adjust the stereo volume,
change the source, control playback, select and manage radio
presets, and adjust some stereo settings.
The app communicates with the stereo using a wireless
connection to the mobile device. You must connect your
compatible device to the stereo using Bluetooth or Wi‑Fi
technology to use the app.
For information about the FUSION-Link remote control app for
compatible Apple or Android devices, go to the Apple App Store
or the Google Play store.
Fuse
10 A
USB
Type A port for USB flash drive or media
player connection, also provides 1 A
charging
USB compatibility
Compatible Android Open Accessory
(AOA) and Apple devices
USB format
FAT32
USB audio format
MP3, max. 250 files per root folder and
each other folder
NOTE: The file load time varies based on
the number and size of the files on the
flash drive.
Connecting a Garmin Watch to the Stereo
Speakers
For a list of a compatible Garmin watches, go to
www.fusionentertainment.com.
Two 3 in. speakers with one passive
radiator
Amplifiers
Class D, 2 x 43 W RMS @ 14.4 Vdc input,
≤ 1% THD+N
22 mm (0.86 in.) maximum
FUSION-Link Remote Control App
®
®
2
More Information
Tuner
AM/FM (North America, Europe, Japan,
Australasia)
Wireless frequency/
protocol
Bluetooth: Class 2
Bluetooth/ANT frequency: From 2,402 to
2,480 MHz
Bluetooth/ANT max. power: 9 dBm EIRP
Line output level (max.)
(peak to peak)
5.5 V
Aux. input level (typical)
RMS
1V
I cannot easily tune the stereo to a radio station
• Using the FUSION-Link app, press to select the manual
tuning mode.
• Use the FUSION-Link app or press
and
to change the
tuner region if you have traveled to a different country.
*IP rating does not include rear connectors.
Tuner
Europe and
Australasia
USA
Japan
FM radio
frequency range
87.5 to 108 MHz
87.5 to
107.9 MHz
76 to 95 MHz
FM frequency
step
50 kHz
200 kHz
50 kHz
AM radio
frequency range
522 to 1620 kHz
530 to
1710 kHz
522 to
1620 kHz
AM frequency
step
9 kHz
10 kHz
9 kHz
Stereo Care
NOTICE
Avoid extreme shock and harsh treatment, because it can
degrade the life of the stereo.
Do not use a sharp object to clean the stereo.
Avoid chemical cleaners, solvents, sunscreen, and insect
repellents that can damage plastic components and finishes.
Thoroughly wipe the stereo with fresh water after exposure to
chlorine, salt water, sunscreen, cosmetics, alcohol, or other
harsh chemicals. Prolonged exposure to these substances can
damage the case.
Do not store the stereo where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Registering Your FUSION Panel-Stereo
Help us better support you by completing our online registration
today.
• Go to www.fusionentertainment.com.
• Keep the original sales receipt, or a photocopy, in a safe
place.
Troubleshooting
My stereo does not respond to my key presses
• Press and hold for 10 seconds to reset the stereo. If
necessary, press to turn the stereo back on.
I cannot hear the audio well or at all
•
•
•
•
•
Check the volume setting on the connected device.
Select a valid source for the stereo.
Make sure the stereo is not muted or paused.
Make sure the stereo is connected to power.
Make sure the external AM/FM antenna is connected and
positioned to receive broadcast signals.
The USB drive will not play
• Make sure the drive is formatted as FAT32.
• Make sure the tracks are in MP3 format and are saved in the
root directory.
• Use the FUSION-Link app to navigate the USB folders.
• Make sure the music is not paused.
More Information
3
Index
A
Android devices 2
ANT devices 2
Apple devices 2
B
battery, charging 1
Bluetooth devices 1, 2
C
charging 1
cleaning the device 3
connectors 1
D
device
keys 1
registration 3
K
keys 1
P
ports 1
power key 1
product registration 3
R
registering the device 3
S
source 1
specifications 2
T
troubleshooting 3
U
USB 1, 2
USB devices 2
W
watch 2
4
Index
FUSION SUPPORT
New Zealand
Australia
Europe
USA
Pacific
09 369 2900
1300 736 012
+44 (0) 370 850 1244
623 580 9000
+64 9 369 2900
®
FUSIONENTERTAINMENT.COM
December 2018
Printed in Taiwan
190-02398-00_0B
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising