Garmin | GPSMAP® 1042xsv without Transducer | Mount Template | Garmin GPSMAP® 1042xsv without Transducer Flush Mount Template

Garmin GPSMAP® 1042xsv without Transducer Flush Mount Template
Printing a Mounting Template
Notice
It is not recommended that you print a mounting template on your own. Use the template that came in the product box.
If you do print the template, you must follow these instructions for printing a mounting template precisely. To print large templates,
you need large enough paper and printer. Failure to have the correct sized paper and printer, or a failure to follow these instructions,
may result in an incorrectly sized template and therefore an incorrect cutout (too large or too small) on the mounting surface of your
boat.
1 Select File > Print.
➎
➌
➍
➋
➊
Select None for Page Scaling ➊.
Ensure the check mark is next to Auto-Rotate and Center ➋.
Drag the arrow ➌ to the right, to view page 2 in the window below.
Verify that the paper size is larger than the template ➍.
In this example, the paper is not larger than the template.
5 If the paper size is not large enough, select Properties ➎ and select a Page Size that is larger than the template.
2
3
4
4
Notice
Garmin is not responsible for any damages or expenses resulting from a miscut mounting surface arising from a failure to follow
these instructions.
GPSMAP® 10x2 Flush Mount Template
305 mm
(12 in.)
14 mm
(9/16 in.)
166.1 mm (6 9/16 in.)
172.7 mm
(6 13/16 in.)
6 mm
(1/4 in.)
3.2 mm
(1/8 in.)
3.6 mm
(9/64 in.)
__
304.3 mm (12 in.)
October 2016
190-02145-04_0A
Printed in Taiwan
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising