Garmin | dēzl™ 580 LMT-S | Owner's Manual | Garmin dēzl™ 580 LMT-S Owner's Manual

Garmin dēzl™ 580 LMT-S Owner's Manual
DĒZL 580
™
Owner’s manual
© 2017 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its
products and to make changes in the content of this manual without obligation to notify any person or organisation of such changes or improvements. Go to www.garmin.com for current updates
and additional information concerning the use of this product.
Garmin and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express permission of
Garmin.
®
dēzl™, Garmin eLog™, Garmin Express™, myTrends™, nüMaps Guarantee™ and nüMaps Lifetime™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without
the express permission of Garmin.
Android™ is a trademark of Google Inc. Apple and Mac are trademarks of Apple Inc, registered in the U.S. and other countries. The Bluetooth word mark and logos are owned by the Bluetooth
SIG, Inc., and any use of such word mark or logo by Garmin is under licence. Foursquare is a trademark of Foursquare Labs, Inc. in the U.S. and in other countries. microSD and the
microSDHC logo are trademarks of SD-3C, LLC. TripAdvisor is a registered trademark of TripAdvisor LLC. TruckDown is the trademark of TruckDown Info International, Inc. Windows ,
Windows Vista and Windows XP are registered trademarks of Microsoft Corporation in the United States and other countries.
®
®
®
®
®
®
®
®
®
®
Table of contents
Getting started................................................................ 1
dēzl 580 device overview ............................................................ 1
Mounting and powering the dēzl device in your vehicle ............. 1
Turning the device on or off ........................................................ 1
Acquiring GPS signals ................................................................ 1
Status bar icons .......................................................................... 1
Using the on-screen buttons ....................................................... 2
Adjusting the volume .................................................................. 2
Enabling automatic volume .................................................... 2
Using the audio mixer ............................................................ 2
Adjusting the screen brightness ................................................. 2
Vehicle Profiles............................................................... 2
Adding a vehicle profile ............................................................... 2
Activating a vehicle profile .......................................................... 2
Changing your trailer information ................................................ 2
Editing a vehicle profile ............................................................... 2
Driver awareness features and alerts ........................... 2
Enabling or disabling audible driver alerts .................................. 3
Red light and speed cameras ..................................................... 3
Navigating to your destination...................................... 3
Routes ........................................................................................ 3
Starting a route ........................................................................... 3
Starting a route by using the map .......................................... 4
Going home ........................................................................... 4
Your route on the map ................................................................ 4
Active lane guidance .............................................................. 4
Viewing turns and directions .................................................. 4
Viewing the Entire Route on the Map .................................... 4
Arriving at your destination ......................................................... 4
Parking Near Your Destination .............................................. 4
Finding your last parking spot ................................................ 5
Changing Your Active Route ...................................................... 5
Adding a location to your route .............................................. 5
Shaping your route ................................................................. 5
Taking a Detour ..................................................................... 5
Changing the route calculation mode .................................... 5
Stopping the route ...................................................................... 5
Using Suggested Routes ............................................................ 5
Avoiding Delays, Tolls and Areas ............................................... 5
Avoiding traffic delays on your route ...................................... 5
Avoiding toll roads .................................................................. 5
Avoiding toll stickers .............................................................. 5
Avoiding road features ........................................................... 6
Avoiding environmental zones ............................................... 6
Custom avoidances ............................................................... 6
Navigating off road ...................................................................... 6
Finding and saving locations........................................ 6
Points of Interest ......................................................................... 6
Finding lorry use points of interest .............................................. 6
Finding TruckDown points of interest ......................................... 6
Finding a location using the search bar ...................................... 6
Finding a location by category .................................................... 7
Searching within a category ................................................... 7
Navigating to points of interest within a venue ...................... 7
Location Search Results ............................................................. 7
Location Search Results on the Map ..................................... 7
Changing the search area .......................................................... 7
Parking ........................................................................................ 8
Finding lorry parking .............................................................. 8
Finding Parking Near Your Current Location ......................... 8
Finding Parking Near a Specified Location ............................ 8
Understanding Parking Colours and Symbols ....................... 8
Search tools ................................................................................ 8
Table of contents
Finding an address ................................................................ 8
Finding a junction ................................................................... 8
Finding a town ........................................................................ 8
Finding a location using coordinates ..................................... 8
Foursquare ................................................................................. 8
Connecting to your Foursquare account ................................ 8
Searching Foursquare points of interest ................................ 8
Viewing Foursquare location details ...................................... 9
Checking in with Foursquare ................................................. 9
TripAdvisor .................................................................................. 9
Finding TripAdvisor points of interest ..................................... 9
Viewing history ............................................................................ 9
Clearing the list of recently found places ............................... 9
Viewing current location information ........................................... 9
Finding emergency services and fuel .................................... 9
Getting directions to your current location ............................. 9
Adding a shortcut ........................................................................ 9
Removing a shortcut .............................................................. 9
Saving Locations ........................................................................ 9
Saving a location .................................................................... 9
Saving your current location .................................................. 9
Editing a favourite location ..................................................... 9
Assigning categories to a saved location ............................... 9
Deleting a favourite location ................................................ 10
Using the Map............................................................... 10
Map Tools ................................................................................. 10
Viewing a map tool ............................................................... 10
Enabling map tools .............................................................. 10
Up ahead .................................................................................. 10
Viewing upcoming locations ................................................. 10
Customising the up ahead categories ................................. 10
Warning and alert symbols ....................................................... 10
Restriction Warnings ............................................................ 11
Road condition warnings ...................................................... 11
Alerts .................................................................................... 11
Trip information ......................................................................... 11
Viewing trip data from the map ............................................ 11
Viewing the trip information page ........................................ 11
Viewing the trip log ............................................................... 11
Resetting trip information ..................................................... 11
Viewing upcoming traffic ........................................................... 11
Viewing traffic on the map .................................................... 11
Searching for traffic incidents ............................................... 11
Customising the map ................................................................ 11
Customising the map layers ................................................. 11
Changing the map data field ................................................ 11
Changing the map perspective ............................................ 11
Live services, traffic and smartphone features ......... 11
Pairing with your phone and connecting to Smartphone Link .. 12
Bluetooth Feature status icons ................................................. 12
Garmin Live Services ................................................................ 12
Subscribing to Garmin Live Services ................................... 12
Sending a Location from Your Smartphone to Your Device ..... 12
Smart notifications .................................................................... 13
Receiving notifications ......................................................... 13
Viewing the list of notifications ............................................. 13
Hands-free Calling .................................................................... 13
Placing a call ........................................................................ 13
Receiving a call .................................................................... 13
Using the call history ............................................................ 13
Using in-call options ............................................................. 13
Saving a home phone number ............................................. 13
Setting up Bluetooth features for your Apple device ................ 14
Connecting to the Smartphone Link app on your Apple
device ................................................................................... 14
Disabling hands-free calling for your Apple device .............. 14
i
Disabling Smartphone Link data and smart notifications for
your Apple device ................................................................ 14
Setting up Bluetooth features for your smartphone with
Android™ .................................................................................. 14
Connecting to the Smartphone Link app on your Android
smartphone .......................................................................... 14
Disabling Bluetooth features for your smartphone with
Android ................................................................................. 14
Disconnecting a Bluetooth device ............................................ 14
Deleting a paired phone ........................................................... 14
Editing and reordering locations in a trip ............................. 19
Discovering Attractions Along Your Trip .............................. 19
Changing routing options for a trip ....................................... 19
Navigating to a favourite trip ................................................ 20
Editing and saving your active route .................................... 20
photoLive traffic cameras .......................................................... 20
Viewing and Saving photoLive Traffic Cameras .................. 20
Viewing photoLive Traffic Cameras on the Map .................. 20
Saving a traffic camera ........................................................ 20
Viewing Previous Routes and Destinations .............................. 20
Traffic............................................................................ 15
dēzl settings.................................................................. 20
Receiving Traffic Data Using Smartphone Link ........................ 15
Receiving traffic data using a traffic receiver ............................ 15
Traffic Receiver Subscriptions ............................................. 15
Enabling traffic .......................................................................... 15
Viewing traffic on the map ........................................................ 15
Searching for traffic incidents ............................................... 15
Map and vehicle settings .......................................................... 20
Enabling maps ..................................................................... 20
Navigation settings ................................................................... 20
Calculation Mode Settings ................................................... 20
Setting a simulated location ................................................. 21
Wireless network settings ......................................................... 21
Driver Assistance Settings ........................................................ 21
Backup camera settings ........................................................... 21
Display settings ......................................................................... 21
Traffic Settings .......................................................................... 21
Units and time settings ............................................................. 21
Setting the Time ................................................................... 21
Language and Keyboard Settings ............................................ 21
Proximity alerts settings ............................................................ 21
Device and Privacy Settings ..................................................... 22
Restoring settings ..................................................................... 22
Vehicle and driver tools............................................... 15
Break planning .......................................................................... 15
Taking a suggested break ................................................... 15
Starting the break timer ........................................................ 15
Pausing and resetting the break timer ................................. 16
Adjusting drive hours ........................................................... 16
Adjusting the daily driving limit ............................................. 16
Garmin eLog ............................................................................. 16
Setting Up Garmin eLog Features On Your dēzl Device ..... 16
Viewing Garmin eLog Information on Your dēzl Device ...... 16
Viewing Garmin eLog Diagnostic and Malfunction Events .. 16
Dispatch and Track ................................................................... 16
Setting up Dispatch and Track sharing ................................ 16
Starting a Dispatch and Track session ................................ 16
Sending a dispatch message to a dēzl device ..................... 17
IFTA .......................................................................................... 17
Entering fuel data ................................................................. 17
Editing fuel data ................................................................... 17
Viewing and Exporting a Jurisdiction Summary ................... 17
Editing and exporting trip reports ......................................... 17
Viewing Exported Jurisdiction Summaries and Trip
Reports ................................................................................ 17
Logging service history ............................................................. 17
Adding service categories .................................................... 18
Deleting service categories .................................................. 18
Renaming service categories ............................................... 18
Deleting service records ...................................................... 18
Editing a service record ....................................................... 18
Voice Command........................................................... 18
Setting the wake-up phrase ...................................................... 18
Activating voice command ........................................................ 18
Voice Command tips ................................................................. 18
Starting a route using Voice command ..................................... 18
Muting Instructions .................................................................... 18
Voice Control ............................................................................ 18
Configuring Voice Control .................................................... 18
Using Voice Control ............................................................. 18
Voice control tips .................................................................. 18
Using the apps.............................................................. 19
Viewing the Owner's Manual on Your Device ........................... 19
Viewing the lorry map ............................................................... 19
Viewing the weather forecast ................................................... 19
Viewing weather near a different town ................................. 19
Viewing the weather radar ................................................... 19
Viewing weather alerts ......................................................... 19
Checking road conditions ..................................................... 19
Trip planner ............................................................................... 19
Planning a trip ...................................................................... 19
ii
Device information....................................................... 22
Viewing Regulatory and Compliance Information ..................... 22
Specifications ............................................................................ 22
Charging the Device ................................................................. 22
Device maintenance ..................................................... 22
Garmin Support Centre ............................................................. 22
Map and Software Updates ...................................................... 22
Connecting to a Wi‑Fi Network ............................................ 22
Updating Maps and Software Using a Wi‑Fi Network .......... 22
Updating Maps and Software with Garmin Express ............ 23
Device Care .............................................................................. 23
Cleaning the outer casing .................................................... 23
Cleaning the Touchscreen ................................................... 23
Avoiding theft ....................................................................... 23
Resetting the device ................................................................. 23
Removing the Device, Mount and Suction Cup ........................ 23
Removing the Device from the Mount .................................. 23
Removing the Mount from the Suction Cup ......................... 24
Removing the Suction Cup from the Windscreen ................ 24
Changing the Fuse in the Vehicle Power Cable ....................... 24
Troubleshooting........................................................... 24
The suction cup will not stay on my windscreen ....................... 24
My device is not acquiring satellite signals ............................... 24
The device does not charge in my vehicle ............................... 24
My battery does not stay charged for very long ........................ 24
My device does not connect to my phone or Smartphone
Link ........................................................................................... 24
The Smartphone Link app affects the battery charge level on my
smartphone ............................................................................... 24
Appendix ....................................................................... 24
Installing a memory card for maps and data ............................ 24
Data management .................................................................... 25
About Memory Cards ........................................................... 25
Connecting the Device to Your Computer ........................... 25
Transferring data from your computer ................................. 25
Disconnecting the USB cable .............................................. 25
Viewing GPS signal status ........................................................ 25
Table of contents
Purchasing additional maps ..................................................... 25
Purchasing accessories ............................................................ 25
Index .............................................................................. 26
Table of contents
iii
Getting started
WARNING
See the Important safety and product information guide in the
product box for product warnings and other important
information.
• Update the maps and software on your device (Map and
Software Updates, page 22).
• Mount the device in your vehicle and connect it to power
(Mounting and powering the dēzl device in your vehicle,
page 1).
• Acquire GPS signals (Acquiring GPS signals, page 1).
• Adjust the volume (Adjusting the volume, page 2) and
display brightness (Adjusting the screen brightness,
page 2).
• Set up a vehicle profile for your lorry.
• Navigate to your destination (Starting a route, page 3).
dēzl 580 device overview
2 Press the mount Á onto the suction cup  until it snaps into
3
4
5
6
place.
Press the suction cup to the windscreen, and flip the lever Ã
back toward the windscreen.
Fit the tab on the top of the mount into the slot on the back of
the device.
Press the bottom of the mount into the device until it clicks.
Plug the other end of the vehicle power cable into a power
outlet in your vehicle.
Turning the device on or off
• To turn the device on, press the power key or connect the
device to power.
• To put the device in power saving mode, press the power key
while the device is on.
While in power saving mode, the screen is off and the device
uses very little power, but it can wake instantly for use.
TIP: you can charge your device faster by putting it in power
saving mode while charging the battery.
• To turn off the device completely, hold the power key until a
prompt appears on the screen, and select Off.
The prompt appears after five seconds. If you release the
power key before the prompt appears, the device enters
power saving mode.
Acquiring GPS signals
À
Á
Â
Ã
power key
USB power and data port
Map and data memory card slot
Microphone for voice command or hands-free calling
Mounting and powering the dēzl device in
your vehicle
WARNING
This product contains a lithium-ion battery. To prevent the
possibility of personal injury or product damage caused by
battery exposure to extreme heat, store the device out of direct
sunlight.
Before you use your device on battery power, you should charge
it.
1 Plug the vehicle power cable À into the USB port on the
device.
When you turn on your navigation device, the GPS receiver
must collect satellite data and establish the current location. The
time required to acquire satellite signals varies based on several
factors, including how far you are from the location where you
last used your navigation device, whether you have a clear view
of the sky, and how long it has been since you last used your
navigation device. The first time you turn on your navigation
device, it may take several minutes to acquire satellite signals.
1 Turn on the device.
2 Wait while the device locates satellites.
3 If necessary, go to an open area away from tall buildings and
trees.
in the status bar indicates the satellite signal strength. When
at least half of the bars are filled, the device is ready for
navigation.
Status bar icons
The status bar is located at the top of the main menu. The status
bar icons display information about features on the device. You
can select some icons to change settings or view additional
information.
GPS signal status. Hold to view GPS accuracy and acquired
satellite information (Viewing GPS signal status, page 25).
Bluetooth technology status. Select to view the Bluetooth
settings (Wireless network settings, page 21).
®
Wi-Fi signal strength. Select to change the Wi-Fi settings
(Wireless network settings, page 21).
Connected to hands-free calling. Select to place a phone call
(Hands-free Calling, page 13).
Active vehicle profile. Select to view the vehicle profile
settings.
Current time. Select to set the time (Setting the Time,
page 21).
Battery charge level.
Sharing Dispatch and Track data. The number of invited
viewers appears on the icon. Select to open the Dispatch
and Track app (Dispatch and Track, page 16).
Getting started
1
Smartphone Link status. Select to connect to the
Smartphone Link app and receive live traffic data and other
live services (Pairing with your phone and connecting to
Smartphone Link, page 12). When the icon is blue, the
device is connected to the Smartphone Link app.
Temperature. Select to view the weather forecast (Viewing
the weather forecast, page 19).
Using the on-screen buttons
On-screen buttons allow you to navigate the pages, menus and
menu options on your device.
• Select
to return to the previous menu screen.
• Hold
to quickly return to the main menu.
• Select or to scroll through lists or menus.
• Hold or to scroll faster.
• Select
to see a context-based menu of options for the
current screen.
Adjusting the volume
1 Select Volume.
2 Select an option:
• Use the slider bar to adjust the volume.
• Select to mute the device.
• Select for additional options.
Enabling automatic volume
Your device can increase or decrease the volume automatically
based on the level of background noise.
1 Select Volume > .
2 Select Automatic Volume.
Using the audio mixer
You can use the audio mixer to set the volume levels for
different audio types, such as navigation prompts or phone calls.
The level for each audio type is a percentage of the master
volume.
1 Select Volume.
2 Select > Audio Mixer.
3 Use the sliders to adjust the volume for each audio type.
Adjusting the screen brightness
1 Select Settings > Display > Brightness.
2 Use the slider bar to adjust the brightness.
Vehicle Profiles
WARNING
Entering your vehicle profile characteristics does not guarantee
that your vehicle's characteristics will be accounted for in all
route suggestions or that you will receive the warning icons in all
cases. Limitations may exist in the map data such that your
device cannot account for these restrictions or road conditions in
all cases. Always defer to all posted road signs and road
conditions when making driving decisions.
Routing and navigation are calculated differently based on your
vehicle profile. The activated vehicle profile is indicated by an
icon in the status bar. The navigation and map settings on your
device can be customised separately for each vehicle type.
When you activate a lorry vehicle profile, the device avoids
including restricted or impassable areas in routes based on the
dimensions, weight, and other characteristics you entered for
your vehicle.
Adding a vehicle profile
You should add a vehicle profile for each lorry or car with which
you will use your dēzl device.
1 Select Settings > Vehicle Profile > .
2 Select an option:
• To add a straight lorry with a permanently attached cargo
area, select Straight Lorry.
• To add a tractor or a tractor-trailer combination, select
Articulated Lorry.
• To add a bus, select Bus.
3 Follow the on-screen instructions to enter the vehicle
characteristics.
After you add a vehicle profile, you can edit the profile to enter
additional detailed information, such as the vehicle identification
number or trailer number.
Activating a vehicle profile
Before you can activate a vehicle profile, you must add the
profile.
1 Select Settings > Vehicle Profile.
2 Select a vehicle profile.
The vehicle profile information appears, including
measurements and weight.
3 Select Select.
Changing your trailer information
Before you can change your trailer information, you must enter a
vehicle profile for a lorry.
When you change the trailer on your lorry, you can change the
trailer information in your vehicle profile without changing the
lorry information. You can switch quickly between frequently
used trailers.
1 Select Settings > Vehicle Profile.
2 Select the lorry vehicle profile to use with the trailer.
3 Select .
4 Select an option:
• To use a recent trailer configuration, select a trailer
configuration from the list.
• To enter a new trailer configuration, select New
Configuration, and enter the trailer information.
Editing a vehicle profile
You can edit a vehicle profile to change vehicle information or to
add detailed information to a new vehicle profile, such as the
vehicle identification number, trailer number or odometer
reading. You can also rename or delete a vehicle profile.
1 Select Settings > Vehicle Profile.
2 Select the vehicle profile to edit.
3 Select an option:
• To edit the vehicle profile information, select , and select
a field to edit.
• To rename a vehicle profile, select >
> Rename
Profile.
• To delete the vehicle profile, select >
> Delete.
Driver awareness features and alerts
NOTICE
The driver alerts and speed limit features are for information
only. They do not replace your responsibility to abide by all
posted speed limit signs and to use safe driving judgement at all
times. Garmin is not responsible for any traffic fines or citations
®
2
Vehicle Profiles
that you receive for failing to follow all applicable traffic laws and
signs.
Your device provides features that can help encourage safer
driving and increase efficiency, even when you are driving in a
familiar area. The device plays an audible tone or message and
displays information for each alert. You can enable or disable
the audible tone for some types of driver alerts. Not all alerts are
available in all areas.
Schools: the device plays a tone and displays the distance to
and speed limit (if available) for an upcoming school or
school zone.
Speed limit reduction: the device plays a tone and displays the
upcoming reduced speed limit so you can be prepared to
reduce your speed.
Speed limit exceeded: the device plays a tone and displays a
red border on the speed limit icon when you exceed the
posted speed limit for the current road.
Speed limit change: the device plays a tone and displays the
upcoming speed limit so you can be prepared to adjust your
speed.
Wrong way on a one-way street: the device plays a message
and displays a full-screen warning if you travel the wrong way
on a one-way street. The edges of the screen appear red and
an alert remains at the top of the screen until you leave the
one-way street or correct your direction of travel.
Level crossing: the device plays a tone and displays the
distance to an upcoming level crossing.
Animal crossing: the device plays a tone and displays the
distance to an upcoming animal crossing area.
Bends: the device plays a tone and displays the distance to a
curve in the road.
Slower traffic: the device plays a tone and displays the
distance to slower traffic when you approach slower traffic at
a higher speed. Your device must be receiving traffic
information to use this feature (Traffic, page 15).
Fatigue warning: the device plays a tone and suggests
upcoming rest stops after you have been driving for more
than two hours without stopping.
No lorries allowed: the device plays a tone when you approach
a road where no lorries are allowed.
Risk of grounding: the device plays a tone and displays a
message when you approach a road where your vehicle
could become grounded.
Lateral wind: the device plays a tone and displays a message
when you approach a road where there is risk of lateral wind.
Narrow road: the device plays a tone and displays a message
when you approach a road that may be too narrow for your
vehicle.
Steep hill: the device plays a tone and displays a message
when you approach a steep hill.
County and country borders: the device plays a tone and
displays a message when you approach the border of a
county or country.
Enabling or disabling audible driver alerts
You can enable or disable the audible tone for some types of
driver alerts. The visual alert appears even when the tone is
disabled.
1 Select Settings > Driver Assistance > Audible Driver
Alerts.
2 Select or clear the tick box next to each alert.
Navigating to your destination
Red light and speed cameras
NOTICE
Garmin is not responsible for the accuracy of or the
consequences of using a red light or speed camera database.
NOTE: this feature is not available for all regions or product
models.
Information about red light and speed camera locations is
available in some areas for some product models. The device
alerts you when you approach a reported speed or red light
camera.
• Live red light and safety camera data is available as a
subscription from Garmin Live Services using the
Smartphone Link app (Garmin Live Services, page 12).
• You must purchase a subscription to download and store
safety camera data on your device. Go to garmin.com
/speedcameras to check availability and compatibility, or to
purchase a subscription or one-time update. You can
purchase a new region or extend an existing subscription at
any time.
• In some regions, some product bundles include pre-loaded
red light and speed camera data with lifetime updates.
• You can use the Garmin Express™ software (garmin.com
/express) to update the camera database stored on your
device. You should update your device frequently to receive
the most up-to-date camera information.
Navigating to your destination
Routes
A route is a path from your current location to one or more
destinations.
• The device calculates a recommended route to your
destination based on the preferences you set, including the
route calculation mode (Changing the route calculation mode,
page 5) and avoidances (Avoiding Delays, Tolls and
Areas, page 5).
• You can start navigating to your destination quickly using the
recommended route, or you can select an alternative route
(Starting a route, page 3).
• If there are specific roads you need to use or avoid, you can
customise the route (Shaping your route, page 5).
• You can add multiple destinations to a route (Adding a
location to your route, page 5).
Starting a route
1 Select Where To?, and search for a location (Finding and
saving locations, page 6).
2 Select a location.
3 Select an option:
• To start navigating using the recommended route, select
Go!.
• To choose an alternative route, select , and select a
route.
Alternative routes appear to the right of the map.
• To edit the course of the route, select > Edit Route, and
add shaping points to the route (Shaping your route,
page 5).
The device calculates a route to the location and guides you
using voice prompts and information on the map (Your route on
the map, page 4). A preview of the major roads in your route
appears at the edge of the map for several seconds.
3
If you need to stop at additional destinations, you can add the
locations to your route (Adding a location to your route,
page 5).
Starting a route by using the map
You can start a route by selecting a location from the map.
1 Select View Map.
2 Drag and zoom the map to display the area to search.
3 If necessary, select to filter the displayed points of interest
by category.
Location markers ( or a blue dot) appear on the map.
4 Select an option:
• Select a location marker.
• Select a point, such as a street, junction or address
location.
5 Select Go!.
Going home
The first time you start a route home, the device prompts you to
enter your home location.
1 Select Where To? > Go Home.
2 If necessary, enter your home location.
Editing your home location
1 Select Where To? > > Set Home Location.
2 Enter your home location.
Your route on the map
As you travel, the device guides you to your destination using
voice prompts and information on the map. Instructions for your
next turn or exit, or other actions appear across the top of the
map.
Viewing turns and directions
While navigating a route, you can view upcoming turns, lane
changes, or other directions for your route.
1 From the map, select an option:
• To view upcoming turns and directions as you navigate,
select > Turns.
The map tool displays the next four turns or directions
beside the map. The list updates automatically as you
navigate the route.
• To view the complete list of turns and directions for the
entire route, select the text bar at the top of the map.
Select
a turn or direction (optional).
2
Detailed information appears. An image of the junction may
appear for junctions on major roads, if available.
Viewing the Entire Route on the Map
1 While navigating a route, select anywhere on the map.
2 Select .
Arriving at your destination
When you approach your destination, the device provides
information to help you complete your route.
•
indicates the location of your destination on the map, and a
voice prompt announces you are approaching your
destination.
• When you approach some destinations, the device
automatically prompts you to search for parking. You can
select Yes to find nearby parking areas (Parking Near Your
Destination, page 4).
• When you stop at your destination, the device automatically
ends the route. If the device does not detect your arrival
automatically, you can select Stop to end your route.
Parking Near Your Destination
À
Á
Â
Ã
Ä
Å
Æ
Ç
Next action in the route. Indicates the next turn, exit, or other action
and the lane in which you should travel, if available.
Distance to the next action.
Name of the street or exit associated with the next action.
Route highlighted on the map.
Next action in the route. Arrows on the map indicate the location of
upcoming actions.
Vehicle speed.
Name of the road on which you are travelling.
Estimated arrival time.
TIP: you can touch this field to change the information it shows
(Changing the map data field, page 11).
Active lane guidance
As you approach some turns, exits, or interchanges in your
route, a detailed simulation of the road appears beside the map,
if available. A coloured line À indicates the proper lane for the
turn.
4
Your device can help you find a parking spot near your
destination. When you approach some destinations, the device
automatically prompts you to search for parking.
NOTE: this feature should be used only when you are using the
car vehicle profile. While using a lorry vehicle profile, you can
search for lorry parking near your destination (Finding lorry
parking, page 8).
1 Select an option:
• When the device prompts you, select Yes to search for
nearby parking.
• If the device does not prompt you, select Where To? >
Categories > Parking, and select > My Destination.
2 Select Filter Parking, and select one or more categories to
filter parking by availability, type, price, or payment methods
(optional).
NOTE: detailed parking data is not available in all areas or
for all parking locations.
3 Select a parking location, and select Go! > Add As Next
Stop.
The device guides you to the parking area.
Navigating to your destination
Finding your last parking spot
When you disconnect the device from vehicle power while the
device is on, your current location is saved as a parking spot.
Select Apps > Last Spot.
Changing Your Active Route
Adding a location to your route
Before you can add a location to your route, you must be
navigating a route (Starting a route, page 3).
You can add locations to the middle or end of your route. For
example, you can add a petrol station as the next destination in
your route.
TIP: to create complex routes with multiple destinations or
scheduled stops, you can use the trip planner to plan, schedule,
and save a trip (Planning a trip, page 19).
1 From the map, select > Where To?.
2 Search for a location (Finding and saving locations,
page 6).
3 Select a location.
4 Select Go!.
5 Select an option:
• To add the location as the next destination in your route,
select Add As Next Stop.
• To add the location to the end of your route, select Add
As Last Stop.
• To add the location and edit the order of destinations in
your route, select Add to Active Route.
The device re-calculates the route to include the added location
and guides you to the destinations in order.
Shaping your route
Before you can shape your route, you must start a route
(Starting a route, page 3).
You can manually shape your route to change its course. This
allows you to direct the route to use a certain road or go through
a certain area without adding a destination to the route.
1 Touch anywhere on the map.
2 Select .
The device enters route shaping mode.
3 Select a location on the map.
TIP: you can select to zoom in on the map and select a
more precise location.
The device recalculates the route to travel through the
selected location.
4 If necessary, select an option:
• To add more shaping points to the route, select additional
locations on the map.
• To remove a shaping point, select .
5 When you are finished shaping the route, select Go!.
Taking a Detour
You can take a detour for a specified distance along your route
or detour around specific roads. This is useful if you encounter
construction zones, closed roads or poor road conditions.
1 From the map, select > Change Route.
TIP: if the Change Route tool is not in the map tools menu,
you can add it (Enabling map tools, page 10).
2 Select an option:
• To re-route for a specific distance, select Detour by
Distance.
• To detour around a specific road on the route, select
Detour by Road.
Navigating to your destination
• To find a new route, select Detour.
Changing the route calculation mode
1 Select Settings > Navigation > Calculation Mode.
2 Select an option:
• Select Faster Time to calculate routes that are faster to
drive but can be longer in distance.
• Select Off Road to calculate point-to-point routes (without
roads).
• Select Shorter Distance to calculate routes that are
shorter in distance but can take more time to drive.
Stopping the route
From the map, select
> Stop.
Using Suggested Routes
Before you can use this feature, you must save at least one
location and enable the travel history feature (Device and
Privacy Settings, page 22).
Using the myTrends™ feature, your device predicts your
destination based on your travel history, the day of the week and
the time of day. After you have driven to a favourite location
several times, the location may appear in the navigation bar on
the map, along with the estimated time of travel and traffic
information.
Select the navigation bar to view a suggested route to the
location.
Avoiding Delays, Tolls and Areas
Avoiding traffic delays on your route
Before you can avoid traffic delays, you must be receiving traffic
information (Receiving Traffic Data Using Smartphone Link,
page 15).
By default, the device optimises your route to avoid traffic delays
automatically. If you have disabled this option in the traffic
settings (Traffic Settings, page 21), you can view and avoid
traffic delays manually.
1 While navigating a route, select > Traffic.
2 Select Alternative Route, if available.
3 Select Go!.
Avoiding toll roads
Your device can avoid routing you through areas that require
tolls, such as toll roads, toll bridges, or congestion areas. The
device may still include a toll area in your route if no other
reasonable routes are available.
1 Select Settings > Navigation.
2 Select an option:
NOTE: the menu changes based on your area and the map
data on your device.
• Select Toll Roads.
• Select Tolls and Fees > Toll Roads.
3 Select an option:
• To be asked each time before routing through a toll area,
select Always Ask.
• To always avoid tolls, select Avoid.
• To always allow tolls, select Allow.
4 Select Save.
Avoiding toll stickers
NOTE: this feature is not available in all areas.
The map data on your device may contain detailed toll sticker
information for some countries. You can avoid or allow toll
stickers for each country.
5
1 Select Settings > Navigation > Tolls and Fees > Toll
Navigating off road
Stickers.
2 Select a country.
3 Select an option:
• To be asked each time before routing through a toll area,
select Always Ask.
• To always avoid tolls, select Avoid.
• To always allow tolls, select Allow.
4 Select Save.
If you are not following roadways as you navigate, you can use
Off Road mode.
1 Select Settings > Navigation.
2 Select Calculation Mode > Off Road > Save.
The next route will be calculated as a straight line to the
location.
Avoiding road features
1 Select Settings > Navigation > Avoidances.
2 Select the road features to avoid on your routes and select
The maps loaded in your device contain locations, such as
restaurants, hotels, vehicle services, and detailed street
information. The Where To? menu helps you find your
destination by providing several methods to browse, search, and
save this information.
• Enter search terms to quickly search all location information
(Finding a location using the search bar, page 6).
• Browse or search pre-loaded points of interest by category
(Points of Interest, page 6).
• Search for lorry park and services, including detailed
TruckDown directory information, where available.
• Search and check into Foursquare points of interest
(Searching Foursquare points of interest, page 8).
• Use search tools to find specific locations, such as
addresses, junctions, or geographic coordinates (Search
tools, page 8).
• Search near a different town or area (Changing the search
area, page 7).
• Save your favourite locations to find them quickly in the future
(Saving Locations, page 9).
• Return to recently found locations (Viewing history,
page 9).
Save.
Avoiding environmental zones
Your device can avoid areas with environmental or emissions
restrictions that may apply to your vehicle.
1 Select Settings > Navigation > Environmental Zones.
2 Select an option:
• To be asked each time before routing through an
environmental zone, select Always Ask.
• To always avoid environmental zones, select Avoid.
• To always allow environmental zones, select Allow.
3 Select Save.
Custom avoidances
Custom avoidances allow you select specific areas or sections
of road to avoid. When the device calculates a route, it avoids
these areas and roads unless no other reasonable route is
available.
Avoiding a road
1 Select Settings > Navigation > Custom Avoidances.
2 Select Add Avoid Road.
3 Select the starting point of the section of road to avoid and
select Next.
4 Select the ending point of the road section and select Next.
5 Select Done.
Avoiding an area
1 Select Settings > Navigation > Custom Avoidances.
2 If necessary, select Add Avoidance.
3 Select Add Avoid Area.
4 Select the upper left corner of the area to avoid and select
Next.
5 Select the lower right corner of the area to avoid and select
Next.
The selected area is shaded on the map.
6 Select Done.
Disabling a custom avoidance
You can disable a custom avoidance without deleting it.
1 Select Settings > Navigation > Custom Avoidances.
2 Select a created avoidance.
3 Select > Disable.
Deleting custom avoidances
1 Select Settings > Navigation > Custom Avoidances.
2 Select an option:
• To delete all custom avoidances, select .
• To delete one custom avoidance, select the avoidance
and select
> Delete.
6
Finding and saving locations
®
®
Points of Interest
A point of interest is a place that you may find useful or
interesting. Points of interest are organised by category and can
include popular travel destinations such as petrol stations,
restaurants, hotels, and entertainment venues.
Finding lorry use points of interest
The detailed maps loaded on your device contain lorry use
points of interest, such as motorway services, roadside services
and weighbridges.
Select Where To? > Categories > Lorry Use.
Finding TruckDown points of interest
The TruckDown directory lists businesses for the haulage
industry such as lorry repair and tyre sales.
The TruckDown directory is not available in all areas.
1 Select an option:
• Select Truck Locations to find points of interest
compatible with lorries.
• Select Truck Services to find service locations for your
lorry.
2 Select a category.
3 If necessary, select Filter by Amenities & Brands, select
one or more amenities, and select Save.
NOTE: this option is available for motorway services only.
4 Select a destination.
Finding a location using the search bar
You can use the search bar to search for locations by entering a
category, brand name, address or town name.
Finding and saving locations
1 Select Where To?.
2 Select Enter Search in the search bar.
3 Enter all or part of the search term.
Suggested search terms appear below the search bar.
4 Select an option:
• To search for a type of business, enter a category name
(for example, "cinemas").
• To search for a business name, enter all or part of the
name.
• To search for an address near you, enter the house
number and street name.
• To search for an address in another town, enter the house
number, street name, town and county.
• To search for a town, enter the town and county.
• To search for coordinates, enter latitude and longitude
coordinates.
5 Select an option:
• To search using a suggested search term, select the term.
• To search using the text you entered, select .
6 If necessary, select a location.
a chequered flag indicates the recommended parking area. A
labelled point indicates the location of the POI within the venue.
Exploring a venue
NOTE: this feature may not be available in all areas or for all
product models.
You can view a list of all points of interest located within each
venue.
1 Select a venue.
2 Select > Explore this Venue.
Location Search Results
By default, the location search results appear in a list, with the
nearest location at the top. You can scroll down to view more
results.
Finding a location by category
1
2
3
4
Select Where To?.
Select a category or select Categories.
If necessary, select a subcategory.
Select a location.
Searching within a category
After you have performed a search for a point of interest, certain
categories may display a Quick Search list that shows the last
four destinations you selected.
1 Select Where To? > Categories.
2 Select a category.
3 Select an option:
• Select a destination from the quick search list on the right
side of the screen.
The quick search list provides a list of recently found
locations in the selected category.
• Select a subcategory, if necessary, and select a
destination.
À
Á
Â
Ã
Ä Go!
Å
Select a location to view the option menu.
Select to view detailed information about the selected location.
Select to find parking areas near the location.
Select to view alternate routes to the locations.
Select to start navigating to the location using the
recommended route.
Select to view the search results on the map.
Location Search Results on the Map
You can view the results of a location search on the map instead
of in a list.
From the location search results, select . The nearest location
appears at the centre of the map, and basic information about
the selected location appears at the bottom of the map.
Navigating to points of interest within a venue
NOTE: this feature may not be available in all areas or for all
product models.
You can create a route to a point of interest (POI) within a larger
venue, such as a store in a shopping centre or a specific
terminal in an airport.
1 Select Where To? > Enter Search.
2 Select an option:
• To search for the venue, enter the name or address of the
venue, select , and go to step 3.
• To search for the POI, enter the name of the POI, select
, and go to step 5.
3 Select the venue.
A list of categories appears below the venue, such as
restaurants, car hire, or terminals.
4 Select a category.
5 Select the POI, and select Go!.
The device creates a route to the parking area or venue
entrance closest to the POI. When you arrive at the destination,
Finding and saving locations
À
Á
Â
à Go!
Ä
Drag the map to view additional search results.
Additional search results. Select to view another location.
Selected location summary. Select to view detailed information
about the selected location.
Select to start navigating to the location using the
recommended route.
Select to view the search results in a list.
Changing the search area
By default, the device searches near your current location. You
can also search other areas, such as near your destination, near
another city, or along your active route.
7
1 Select Where To?.
2 Select .
3 Select an option.
Parking
Your dēzl device includes detailed parking data, which can help
you find nearby parking based on the likelihood of available
parking spots, type of parking area, price, or accepted payment
methods.
In some areas, live parking data is available while your dēzl
device is connected to Smartphone Link (Pairing with your
phone and connecting to Smartphone Link, page 12). While
your device is receiving live parking data, you can view real-time
parking trends.
NOTE: detailed parking data is not available in all areas or for all
parking locations. Garmin is not responsible for the accuracy or
timeliness of live parking data.
Finding lorry parking
1 Select Where To? > Truck Locations > Parking.
2 If necessary, select High Capacity Only to filter locations by
parking capacity.
3 Select a parking location.
4 Select Go!.
Finding Parking Near Your Current Location
1 Select Where To? > Categories > Parking.
2 Select Filter Parking, and select one or more categories to
filter parking by availability, type, price, or payment methods
(optional).
NOTE: detailed parking data is not available in all areas or
for all parking locations.
3 Select a parking location.
4 Select Go!.
Finding Parking Near a Specified Location
NOTE: this feature is available only when you are using the car
vehicle profile.
1 Search for a location.
2 From the location search results, select a location.
3 Select .
A list of parking areas near the selected location appears.
4 Select Filter Parking, and select one or more categories to
filter parking by availability, type, price, or payment methods
(optional).
NOTE: detailed parking data is not available in all areas or
for all parking locations.
5 Select a parking location.
6 Select Go!.
Understanding Parking Colours and Symbols
Parking locations that include detailed parking data are colourcoded to show the likelihood of finding parking. Symbols indicate
the type of parking available (street or car park), relative pricing
information and payment type.
You can view the legend for these colours and symbols on the
device.
From the parking search results, select .
Search tools
Search tools allow you to search for specific types of locations
by responding to on-screen prompts.
8
Finding an address
NOTE: the order of the steps may change depending on the
map data loaded on your device.
1 Select Where To?.
2 If necessary, select Searching near: to change the search
area (Changing the search area, page 7).
3 Select Address.
4 Follow the on-screen instructions to enter address
information.
5 Select the address.
Finding a junction
You can search for a junction between two streets, motorways,
or other roads.
1 Select Where To? > Categories > Junctions.
2 Follow the on-screen instructions to enter street information.
3 Select the junction.
Finding a town
1 Select Where To? > Categories > Towns.
2 Select an option:
• Select a town from the list of nearby town.
• To search near another location, select Searching near:
(Changing the search area, page 7).
• To search for a town by name, select Enter Search, enter
a town name, and select .
Finding a location using coordinates
You can find a location using latitude and longitude coordinates.
This can be helpful when geocaching.
1 Select Where To? > Categories > Coordinates.
2 If necessary, select , and change the coordinate format or
datum.
3 Enter the latitude and longitude coordinates.
4 Select View on Map.
Foursquare
Foursquare is a location-based social network. Your device
includes pre-loaded Foursquare points of interest, which are
indicated by the Foursquare logo in your location search results.
For additional features, you can connect to your Foursquare
account using Smartphone Link on your compatible smartphone.
When you connect to your Foursquare account using
Smartphone Link, you can view Foursquare location details,
check in to a location, and search for points of interest in the
online Foursquare database.
Connecting to your Foursquare account
1 Connect your device to Smartphone Link (Pairing with your
phone and connecting to Smartphone Link, page 12).
2 On your smartphone, open the Smartphone Link app.
3 Open the Smartphone Link app settings, and select
Foursquare® > Login.
4 Enter your Foursquare login information.
Searching Foursquare points of interest
You can search for Foursquare points of interest loaded on your
device. When you connect to your Foursquare account using
Smartphone Link, the search provides the most up-to-date
results from the online Foursquare database and customised
results from your Foursquare user account.
Select Where To? > Categories > Foursquare®.
Finding and saving locations
Viewing Foursquare location details
Getting directions to your current location
Before you can view Foursquare location details, you must
connect to a supported phone running Smartphone Link and log
in to your Foursquare account.
You can view detailed Foursquare location information, such as
user ratings, restaurant pricing information, and hours of
operation.
1 From the location search results, select a Foursquare point of
interest.
2 Select .
If you need to tell another person how to get to your current
location, your device can give you a list of directions.
1 From the map, select the vehicle.
2 Select > Directions to Me.
3 Select a starting location.
4 Select Select.
Checking in with Foursquare
Before you can check in with Foursquare, you must connect to a
supported phone running Smartphone Link and log in to your
Foursquare account.
1 Select Apps > Foursquare® > Check In.
2 Select a point of interest.
3 Select > Check In.
TripAdvisor
Your device includes TripAdvisor points of interest and ratings.
TripAdvisor ratings appear automatically in the search results list
for applicable points of interest. You can also search for nearby
TripAdvisor points of interest and sort by distance or popularity.
Finding TripAdvisor points of interest
1 Select Where To? > Categories > TripAdvisor.
2 Select a category.
A list of nearbyTripAdvisor points of interest for the category
appears.
Select
Sort Results to sort the search results by distance or
3
popularity (optional).
Viewing history
Your device stores a history of the last 50 locations you have
found.
Select Where To? > History.
Clearing the list of recently found places
Select Where To? > History >
> Clear > Yes.
Viewing current location information
You can use the Where Am I? page to view information about
your current location. This feature is helpful if you need to tell
emergency personnel your location.
From the map, select the vehicle.
Finding emergency services and fuel
You can use the Where Am I? page to find the nearest
hospitals, police stations, and fuel stations.
1 From the map, select the vehicle.
2 Select Hospitals, Police Station, Petrol Stations or
Roadside Assist..
NOTE: some service categories are not available in all areas.
NOTE: when a lorry vehicle profile is active, an option for
motorway services appears instead of fuel.
A list of locations for the selected service appears, with the
nearest locations at the top.
3 Select a location.
4 Select an option:
• To navigate to the location, select Go!.
• To view the phone number and other location details,
select .
Finding and saving locations
Adding a shortcut
You can add shortcuts to the Where To? menu. A shortcut can
point to a location, a category, or a search tool.
The Where To? menu can contain up to 36 shortcut icons.
1 Select Where To? > Personalise.
2 Select an item.
Removing a shortcut
1 Select Where To? > > Remove Shortcut(s).
2 Select a shortcut to remove.
3 Select the shortcut again to confirm.
4 Select Save.
Saving Locations
Saving a location
1 Search for a location (Finding a location by category,
page 7).
2 From the search results, select a location.
3 Select > Save.
4 Enter a name and select Done.
Saving your current location
1 From the map, select the vehicle icon.
2 Select Save.
3 Enter a name and select Done.
4 Select OK.
Editing a favourite location
1 Select Where To? > Favourites.
2 If necessary, select a category.
3 Select a location.
4 Select .
5 Select > Edit.
6 Select an option:
• Select Name.
• Select Phone Number.
• Select Categories to assign categories to the saved
location.
• Select Change Map Symbol to change the symbol used
to mark the saved location on a map.
7 Edit the information.
8 Select Done.
Assigning categories to a saved location
You can add custom categories to organise your saved
locations.
NOTE: categories appear in the saved locations menu after you
have saved more than 12 locations.
1 Select Where To? > Favourites.
2 Select a location.
3 Select .
4 Select > Edit > Categories.
9
5 Enter one or more category names, separate by commas.
6 If necessary, select a suggested category.
7 Select Done.
2 Select a map tool.
The map tool appears in a panel at the edge of the map.
3 When you have finished using the map tool, select .
Deleting a favourite location
Enabling map tools
NOTE: deleted locations cannot be recovered.
1 Select Where To? > Favourites.
2 Select > Delete Favourite(s).
3 Select the box next to the saved locations to delete and
select Delete.
By default, only the most commonly used map tools are enabled
in the map tools menu. You can add up to 12 tools to the menu.
1 From the map, select > .
2 Select the tick box next to each tool to add.
3 Select Save.
Using the Map
You can use the map to navigate a route (Your route on the
map, page 4) or to view a map of your surroundings when no
route is active.
1 Select View Map.
2 Touch anywhere on the map.
3 Select an option:
• Drag the map to pan left, right, up, or down.
• To zoom in or out, select or .
• To switch between North Up and 3-D views, select .
• To filter the displayed points of interest by category, select
.
• To start a route, select a location on the map, and select
Go! (Starting a route by using the map, page 4).
Map Tools
Map tools provide quick access to information and device
functions while you view the map. When you activate a map
tool, it appears in a panel at the edge of the map.
Stop: stops navigation of the active route.
Change Route: allows you to re-route or skip locations in your
route.
Up Ahead: displays upcoming locations along the route, or the
road on which you are travelling (Up ahead, page 10).
Turns: displays a list of upcoming turns in your route (Viewing
turns and directions, page 4).
Trip Data: displays customisable trip data, such as speed or
mileage (Viewing trip data from the map, page 11).
Volume: adjusts the master audio volume.
Brightness: adjusts the screen brightness.
Phone: displays a list of recent phone calls from your connected
phone, and displays in-call options while a phone call is
active (Using in-call options, page 13).
Dispatch and Track: allows you to start and stop Dispatch and
Track sharing (Dispatch and Track, page 16).
Traffic: displays traffic conditions along your route or in your
area (Viewing upcoming traffic, page 11).
Weather: displays weather conditions for your area.
photoLive: displays live traffic cameras from your photoLive
subscription (photoLive traffic cameras, page 20).
Report Camera: allows you to report a speed or red light
camera. This tool is available only when you have speed or
red light camera data on your device and you have an active
connection to the Smartphone Link app (Pairing with your
phone and connecting to Smartphone Link, page 12).
Elevation: displays elevation changes ahead.
Break Planner: displays break reminders and suggested stops.
Viewing a map tool
1 From the map, select
10
Up ahead
The Up Ahead tool provides information about upcoming
locations along your route or the road on which you are
travelling. You can view upcoming points of interest, such as
restaurants, petrol stations, or roadside service. When travelling
on a motorway, you can also view information and available
services for upcoming exits and cities, similar to the information
on motorway road signs.
You can customise three categories to show in the Up Ahead
tool.
Viewing upcoming locations
1 From the map, select > Up Ahead.
2 Select an option:
• To view the next upcoming location in each category,
select , if necessary.
• To view information and available services for upcoming
motorway exits or cities, select .
NOTE: this option is available only while you are travelling
on a motorway, or when your route includes a motorway.
3 Select an item to view a list of locations for that category,
exit, or city.
Customising the up ahead categories
You can change the location categories that appear in the Up
Ahead tool.
1 From the map, select > Up Ahead.
2 Select a category.
3 Select .
4 Select an option:
• To move a category up or down in the list, select and drag
the arrow next to the category name.
• To change a category, select the category.
• To create a custom category, select a category, select
Custom Search, and enter the name of a business or
category.
5 Select Done.
Warning and alert symbols
WARNING
Entering your vehicle profile characteristics does not guarantee
that your vehicle's characteristics will be accounted for in all
route suggestions or that you will receive the warning icons in all
cases. Limitations may exist in the map data such that your
device cannot account for these restrictions or road conditions in
all cases. Always defer to all posted road signs and road
conditions when making driving decisions.
Warning and alert symbols may appear on the map or in route
directions to alert you to potential hazards, road conditions, and
upcoming weighbridges.
.
Using the Map
Restriction Warnings
Height
Weight
Axle Weight
Length
Width
No Lorries Allowed
No Trailers Allowed
No Hazardous Materials Allowed
No Flammables Allowed
No Water Pollutants Allowed
No Left Turn
No Right Turn
No U Turn
Road condition warnings
Risk of grounding
Lateral wind
Narrow road
Sharp curve
Steep down hill
Tree overhang
Resetting trip information
1 From the map, select Speed.
2 Select > Reset Field(s).
3 Select an option:
• When not navigating a route, select Select All to reset
every data field on the first page except the speedometer.
• Select Reset Trip Data to reset the information on the trip
computer.
• Select Reset Max. Speed to reset the maximum speed.
• Select Reset Trip B to reset the odometer.
Viewing upcoming traffic
You can view traffic incidents coming up along your route or
along the road on which you are travelling.
1 While navigating a route, select > Traffic.
The nearest upcoming traffic incident appears in a panel on
the right side of the map.
2 Select the traffic incident to view additional details.
Viewing traffic on the map
The traffic map shows colour-coded traffic flow and delays on
nearby roads.
1 From the main menu, select Apps > Traffic.
2 If necessary, select > Legend to view the legend for the
traffic map.
Searching for traffic incidents
1 From the main menu, select Apps > Traffic.
2 Select > Incidents.
3 Select an item in the list.
4 If there is more than one incident, use the arrows to view
additional incidents.
Alerts
Weighbridge
Road not verified for lorries
Trip information
Viewing trip data from the map
Before you can view trip data on the map, you must add the tool
to the map tools menu (Enabling map tools, page 10).
From the map, select > Trip Data.
Customising the trip data fields
Before you can customise the data that appears in the trip data
map tool, you must add the trip data tool to the map tools menu
(Enabling map tools, page 10).
1 From the map, select > Trip Data.
2 Select a trip data field.
3 Select an option.
The new trip data field appears in the trip data map tool.
Viewing the trip information page
The trip information page displays your speed and provides
statistics about your trip.
NOTE: if you make frequent stops, leave the device turned on,
so it can accurately measure elapsed time during the trip.
From the map, select Speed.
Viewing the trip log
Your device keeps a trip log, which is a record of the path you
have travelled.
1 Select Settings > Map & Vehicle > Map Layers.
2 Select the Trip Log tick box.
Live services, traffic and smartphone features
Customising the map
Customising the map layers
You can customise which data appears on the map, such as
icons for points of interest and road conditions.
1 Select Settings > Map & Vehicle > Map Layers.
2 Select the layers to include on the map, and select Save.
Changing the map data field
1 From the map, select a data field.
NOTE: you cannot customise Speed.
2 Select a type of data to display.
Changing the map perspective
1 Select Settings > Map & Vehicle > Driving Map View.
2 Select an option:
• Select Track Up to display the map in two dimensions (2D), with your direction of travel at the top.
• Select North Up to display the map in 2-D with north at
the top.
• Select 3-D to display the map in three dimensions.
3 Select Save.
Live services, traffic and smartphone
features
To get the most from your dēzl device, you should pair the
device with your smartphone and connect to the Smartphone
Link app. The Smartphone Link app allows your device to
receive live data, including live traffic data, parking trends, red
light and speed cameras and other live services. It also allows
11
you to use connected features, such as Dispatch and Track trip
sharing and messaging.
Live traffic data: sends real-time traffic data to your device,
such as traffic incidents and delays, construction zones and
road closings (Traffic, page 15).
Live parking information: sends real-time parking trends to
your device, where available (Parking, page 8).
Garmin Live Services: provides free and paid services to send
live data to your device, such as red light and speed cameras
or traffic cameras (Garmin Live Services, page 12).
Weather information: sends real-time weather conditions and
alerts to your device (Viewing the weather forecast,
page 19).
Dispatch and Track: allows you to receive dispatches and
share your trip with a dispatcher and selected contacts in real
time (Dispatch and Track, page 16).
Smart Notifications: displays phone notifications and
messages on your device. This feature is not available for all
languages or message types.
Hands-Free calling: allows you to make and receive phone
calls using your device, and allows you to use the device as a
hands-free speaker phone. If the selected language supports
the voice command feature, you can make and answer calls
using voice commands.
Send locations to device: allows you to send locations from
your smartphone to your navigation device.
Foursquare check in: allows you to check into Foursquare
locations using your navigation device (Checking in with
Foursquare, page 9).
Pairing with your phone and connecting to
Smartphone Link
You must pair your dēzl device with your phone and connect to
Smartphone Link to use some features, such as live traffic and
parking information, hands-free calling and other connected
features.
After the devices are paired, they connect automatically when
they are turned on and within range.
1 From the app store on your phone, install the Smartphone
Link app.
2 Place the dēzl device and your phone within 3 m (10 ft) of
each other.
3 On the dēzl device, select Settings > Wireless Networks,
and select the Bluetooth check box.
4 Select Search for Devices.
5 On your phone, enable Bluetooth wireless technology, and
set the phone to be visible.
See your phone owner's manual for more information.
6 On the dēzl device, select OK.
The dēzl device begins searching for nearby Bluetooth
devices, and a list of Bluetooth devices appears. It may take
up to a minute for your phone to appear in the list.
7 Select your phone from the list, and select OK.
8 On your phone, confirm the pairing request.
9 On your phone, open the Smartphone Link app.
If you are pairing with an Apple device, a security code
appears on the dēzl screen.
10 If necessary, enter the security code on your phone within 30
seconds.
®
Bluetooth Feature status icons
Status icons appear in the Bluetooth settings next to each paired
phone.
12
Select Settings > Wireless Networks.
• A grey icon indicates the feature is disabled or disconnected
for that phone.
• A coloured icon indicates the feature is connected and active
for that phone.
Hands-free calling
Smart notifications
Smartphone Link features and services
Garmin Live Services
Before you can use Garmin Live Services, your device must be
connected to Smartphone Link (Pairing with your phone and
connecting to Smartphone Link, page 12).
Garmin Live Services provides free and subscription-based
plans that send live data to your device, such as traffic
conditions, weather and red light and speed cameras.
Some services, such as weather, are available as separate apps
on your device. Other services, such as traffic, enhance the
existing navigation features on your device. Features that
require access to Garmin Live Services display the Smartphone
Link symbol and appear only when the device is connected to
Smartphone Link.
Subscribing to Garmin Live Services
Some dēzl Live Services require a paid subscription. In the
Smartphone Link app, you can purchase a lifetime subscription
as an in-app purchase. The subscription is tied to the app store
account for your smartphone.
1 On your smartphone, open the Smartphone Link app.
2 Select My Account.
A list of available services and subscription prices appears.
3 Select a service.
4 Select the price.
5 Select Subscribe.
6 Follow the on-screen instructions to complete the purchase.
Sending a Location from Your Smartphone
to Your Device
You can search for a location using the Smartphone Link app on
your phone and send it to your dēzl device.
1 On your smartphone, open the Smartphone Link app.
2 Select an option:
• To find a nearby location, select Find Nearby Places, and
enter all or part of an address or the name of a place.
• To find a nearby Foursquare point of interest, select
Foursquare, and select a point of interest from the list.
• To choose a location on the map, select Pick location,
and touch the location on the map.
• To find an address from your contact list, select Contacts,
and select a contact name.
The selected location appears on the map.
3 Select Send.
The Smartphone Link app sends the location to your dēzl.
4 On your dēzl device, select an option:
• To start navigating to the location, select Go!.
• To view details about the location, or to save the location
to your favourites, select .
• To accept the location without starting navigation, select
OK.
The location appears in the recently found locations on your dēzl
device.
Live services, traffic and smartphone features
Smart notifications
While your device is connected to the Smartphone Link app, you
can view notifications from your smartphone on your dēzl
device, such as text messages, incoming calls, and calendar
appointments.
NOTE: you may need to wait a few minutes to receive
notifications on your navigation device after it connects to the
Smartphone Link app. appears coloured in the Bluetooth
settings when smart notifications are connected and active
(Bluetooth Feature status icons, page 12).
Receiving notifications
WARNING
Do not read or reply to notifications while driving.
Before your dēzl device can receive notifications, you must
connect it to your smartphone and to the Smartphone Link app.
From most pages, a pop-up appears when the device receives a
notification from your smartphone. If the device is moving, you
must verify you are a passenger and not the driver before you
can view notifications.
NOTE: if you are viewing the map, notifications appear in a map
tool.
• To ignore a notification, select OK.
The pop-up closes, but the notification remains active on your
phone.
• To view a notification, select View.
• To listen to the notification, select View > Play.
The device reads the notification using text-to-speech
technology. This feature is not available for all languages.
• To perform additional actions, such as dismissing the
notification from your phone, select View, and select an
option.
NOTE: additional actions are available for only some
notification types and must be supported by the app
generating the notification.
Receiving notifications while viewing the map
WARNING
Do not read or reply to notifications while driving.
Before your dēzl device can receive notifications, you must
connect it to your smartphone and to the Smartphone Link app.
When you are viewing the map, new notifications appear in a
map tool at the edge of the screen. You cannot view
notifications if the device is moving.
• To ignore a notification, select , or wait for popup to expire.
The pop-up closes, but the notification remains active on your
phone.
• To view a notification, select the notification text.
• To listen to the notification, select Play Message.
The device reads the notification using text-to-speech
technology. This feature is not available for all languages.
• To listen to the notification using a voice command, say Play
Message.
NOTE: this option is available only when the selected
language supports the voice command feature and appears
in the map tool.
Viewing the list of notifications
You can view a list of all active notifications.
1 Select Apps > Smart Notifications.
The list of notifications appears. Unread notifications appear
black, and previously read notifications appear grey.
2 Select an option:
Live services, traffic and smartphone features
• To view a notification, select the notification description.
• To listen to a notification, select .
The device reads the notification using text-to-speech
technology. This feature is not available for all languages.
Hands-free Calling
NOTE: while most phones are supported and can be used, it
cannot be guaranteed that a particular phone can be used. All
features may not be available for your phone.
Using Bluetooth wireless technology, your device can connect to
your mobile phone to become a hands-free device. While
connected, you can place or receive calls using your device.
Placing a call
Dialling a number
1 Select Apps > Phone > Dial.
2 Enter the number.
3 Select Dial.
Calling a contact in your phone book
Your phone book is loaded from your phone to the device each
time your phone and the device connect. It may take a few
minutes for the phone book to be available. Some phones do
not support this feature.
1 Select Apps > Phone > Phone Book.
2 Select a contact.
3 Select Call.
Calling a location
1 Select Apps > Phone > Browse Categories.
2 Select a point of interest.
3 Select Call.
Receiving a call
When you receive a call, select Answer or Ignore.
Using the call history
Your call history is loaded from your phone to the device each
time your phone and the device connect. It may take a few
minutes for the call history to be available. Some phones do not
support this feature.
1 Select Apps > Phone > Call History.
2 Select a category.
A list of calls appears, with the most recent calls at the top.
3 Select a call.
Using in-call options
While on a call, you can select in-call options from the map.
• To transfer audio to your phone, select .
TIP: you can use this feature if you want to turn off your
device and remain on the call or if you need privacy.
• To use the dial pad, select .
TIP: you can use this feature to use automated systems,
such as voice mail.
• To mute the microphone, select .
• To hang up, select .
Saving a home phone number
TIP: after you save a home number, you can edit the home
number by editing “Home” in your list of favourite locations
(Editing a favourite location, page 9).
1 Select Apps > Phone > > Set Home Number.
2 Enter your phone number.
3 Select Done.
13
Calling home
Before you can call home, you must enter a phone number for
your home location.
Select Apps > Phone > Call Home.
Setting up Bluetooth features for your Apple
device
By default, all compatible Bluetooth features are enabled when
you pair your phone. You can enable, disable, or customise
certain features.
Connecting to the Smartphone Link app on your
Apple device
Before you can connect to the Smartphone Link app, you must
pair and connect your dēzl device with your phone.
If you did not connect to the Smartphone Link app during the
pairing process, you can connect to it for additional Bluetooth
features. The Smartphone Link app communicates with your
phone using Bluetooth Smart technology. The first time you
connect to the Smartphone Link app on an Apple device, you
must enter a Bluetooth Smart security code.
1 From the app store on your phone, install the Smartphone
Link app.
2 On your phone, open the Smartphone Link app.
A security code appears on the dēzl device screen.
3 On your phone, enter the code.
Disabling hands-free calling for your Apple device
You can disable hands-free calling and remain connected to
your phone for Smartphone Link data and notifications.
1 Select Settings > Wireless Networks.
2 Select the phone name used for hands-free calling.
TIP: your phone may connect to hands-free calling and data
using two different names. appears coloured next to the
phone name used for hands-free calling.
3 Clear the Phone calls tick box.
Disabling Smartphone Link data and smart
notifications for your Apple device
You can disable Smartphone Link data and smart notifications
and remain connected to your phone for hands-free calling.
1 Select Settings > Wireless Networks.
2 Select the phone name connected to Smartphone Link data
and notifications.
TIP: your phone may connect to hands-free calling and data
using two different names. and appear coloured next to
the phone name used for data and notifications.
3 Clear the Smartphone services tick box.
Showing or hiding notification categories for your Apple
device
You can filter the notifications shown on your device by showing
or hiding categories.
1 Select Settings > Wireless Networks.
2 Select the phone name connected to Smartphone Link data
and notifications.
TIP: your phone may connect to hands-free calling and data
using two different names. and appear coloured next to
the phone name used for data and notifications.
3 Select Smart Notifications.
4 Select the check box next to each notification to show.
14
Setting up Bluetooth features for your
smartphone with Android™
By default, all compatible Bluetooth features are enabled when
you pair your phone. You can enable, disable, or customise
certain features.
Connecting to the Smartphone Link app on your
Android smartphone
Before you can connect to the Smartphone Link app, you must
pair and connect your dēzl device with your phone.
If you did not connect to the Smartphone Link app during the
pairing process, you can connect to it for additional Bluetooth
features.
1 From the app store on your phone, install the Smartphone
Link app.
2 On your phone, open the Smartphone Link app.
Disabling Bluetooth features for your smartphone
with Android
You can disable specific Bluetooth features and remain
connected to other features.
1 Select Settings > Wireless Networks.
2 Select the phone name.
3 Select an option:
• To disable hands-free calling, clear the Phone calls check
box.
• To disable Smartphone Link data and smart notifications,
clear the Smartphone Link check box.
• To disable specific app notifications, use the settings in
the Smartphone Link app.
Showing or hiding notifications for your smartphone with
Android
You can use the Smartphone Link app to select which types of
notifications appear on your dēzl device.
1 On your phone, open the Smartphone Link app.
2 Select .
3 Verify the Smart Notifications check box is selected.
4 From the Notifications section, select Settings.
A list of notification categories and apps appears.
5 Select an option:
• To enable or disable a notification, select the toggle switch
next to the category or app name.
• To add an app to the list, select .
Disconnecting a Bluetooth device
You can temporarily disconnect a Bluetooth device without
deleting it from the paired devices list. The Bluetooth device can
connect to your dēzl device automatically in the future.
1 Select Settings > Wireless Networks.
2 Select the device to disconnect.
3 Clear the tick box next to the name of your paired device.
Deleting a paired phone
You can delete a paired phone to prevent it from automatically
connecting to your device in the future.
1 Select Settings > Wireless Networks.
2 Select the phone, and select Unpair device.
Live services, traffic and smartphone features
Traffic
NOTICE
Garmin is not responsible for the accuracy or timeliness of the
traffic information.
Your device can provide information about traffic on the road
ahead or on your route. You can set your device to avoid traffic
when calculating routes, and to find a new route to your
destination if a large traffic delay occurs on your active route
(Traffic Settings, page 21). The traffic map allows you to
browse the map for traffic delays in your area.
To provide traffic information, your device must be receiving
traffic data.
• Your device receives free traffic data through the
Smartphone Link app (Receiving Traffic Data Using
Smartphone Link, page 15).
• All product models can receive traffic data using an over-theair traffic receiver cable accessory (Receiving traffic data
using a traffic receiver, page 15). Go to your product page
at garmin.com to find and purchase a compatible traffic
receiver cable accessory.
Traffic data is not available in all areas. For information about
traffic coverage areas, go to www.garmin.com/traffic.
Receiving Traffic Data Using Smartphone
Link
Your device can receive free traffic data through the
Smartphone Link app.
1 Connect your device to Smartphone Link (Pairing with your
phone and connecting to Smartphone Link, page 12).
2 On your dēzl device, select Settings > Traffic, and verify the
Traffic tick box is selected.
Receiving traffic data using a traffic receiver
NOTICE
Heated (metallised) windscreens could degrade the
performance of the traffic receiver.
A traffic receiver receives traffic data from an over-the-air
broadcast signal, where available. An over-the-air traffic receiver
cable is available as an accessory for all product models. Go to
your product page at garmin.com to find and purchase a
compatible traffic receiver cable accessory. Traffic data is not
available in all areas.
Connect the device to vehicle power using the traffic receiver
cable (Mounting and powering the dēzl device in your
vehicle, page 1).
When you are within a traffic coverage area, your device can
display traffic information and help you avoid traffic delays.
Traffic Receiver Subscriptions
A regional traffic data subscription is included with most traffic
receivers. You can add subscriptions for additional regions to
your traffic receiver. For more information, go to garmin.com
/traffic.
Viewing traffic subscriptions
Select Settings > Traffic > Subscriptions.
Adding a subscription
You can purchase traffic subscriptions for other regions or
countries.
1 From the main menu, select Traffic.
2 Select Subscriptions > .
3 Write down the FM traffic receiver unit ID.
4 Go to www.garmin.com/fmtraffic to purchase a subscription
and get a 25-character code.
Traffic
The traffic subscription code cannot be reused. You must
obtain a new code each time you renew your service. If you
own multiple FM traffic receivers, you must obtain a new
code for each receiver.
5 Select Next on the device.
6 Enter the code.
7 Select Done.
Enabling traffic
You can enable or disable traffic data.
1 Select Settings > Traffic.
2 Select the Traffic tick box.
Viewing traffic on the map
The traffic map shows colour-coded traffic flow and delays on
nearby roads.
1 From the main menu, select Apps > Traffic.
2 If necessary, select > Legend to view the legend for the
traffic map.
Searching for traffic incidents
1 From the main menu, select Apps > Traffic.
2 Select > Incidents.
3 Select an item in the list.
4 If there is more than one incident, use the arrows to view
additional incidents.
Vehicle and driver tools
Break planning
NOTICE
This device by itself is NOT an approved substitute for logbook
recording requirements under US Federal Motor Carrier Safety
Administration (FMCSA) regulations. Drivers should comply with
all applicable hours-of-service requirements. When integrated
with a Garmin eLog™ compliant Electronic Logging Device
(ELD), this device enables a motor carrier to comply with hours
of service logging and break requirements. For more
information, or to purchase a Garmin eLog device, go to
garmin.com/elog.
When the break planning feature is enabled, the device notifies
you one hour before suggested break times and drive hour limits
and suggests break locations on your route. You can use this
feature to keep track of your working hours, which may help you
comply with safety regulations.
NOTE: break planning features are not available when using the
car vehicle profile.
Taking a suggested break
When it is time for a break, the device notifies you and displays
suggested break location POIs along your route.
Select a POI from the list of suggested break locations.
The device adds the break location as the next destination on
your route.
Starting the break timer
The break timer starts automatically when the vehicle is moving
at least 5 mph (8 kph) for 30 seconds. You can start the timer
manually at any time.
1 From the map, select > Break Planner.
2 Select Start Timer.
15
Pausing and resetting the break timer
The break timer pauses automatically when the vehicle stops for
three minutes or longer. You can pause the timer manually for
brief stops, such as parking or stopping at motorway services. At
the end of your drive, you can manually reset the timer.
1 Select Stop Timer.
2 Select an option:
• To pause the timer, select Pause.
• To stop and reset the timer, select Reset.
Adjusting drive hours
You can adjust your total hours driven to more closely match
your hours of service records.
1 While using the break planner feature, select Total Hours
Driven.
2 Enter the total hours driven.
3 Select Save.
Adjusting the daily driving limit
You can adjust the daily driving limit to correspond with legal
requirements in your area.
NOTE: this feature is not available in all areas.
1 While using the break planner feature, select Daily Hours
Driven.
2 Select the daily driving limit for your area.
3 Select Save.
Garmin eLog
Enabling or Disabling the Garmin eLog Connection on Your
dēzl Device
1 From your dēzl device, select Settings > Wireless
Networks.
2 Select the name of your paired mobile device.
3 Select or clear the Garmin eLog check box.
Viewing Garmin eLog Information on Your dēzl
Device
Before you can view Garmin eLog information on your dēzl
device, you must complete the setup process (Setting Up
Garmin eLog Features On Your dēzl Device, page 16).
As you drive your vehicle, the device displays your duty status
and total drive hours in the Garmin eLog map tool.
Select a field to view a summary of remaining drive hours.
Viewing Garmin eLog Diagnostic and Malfunction
Events
When the Garmin eLog device detects a diagnostic or
malfunction event, it displays a notification on the device screen.
Select the diagnostic or malfunction notification to view
details about the event.
NOTE: you can view additional information about diagnostic
and malfunction events in the Garmin eLog app.
Dispatch and Track
NOTICE
Use caution when sharing your location information with others.
The Garmin eLog adapter enables a motor carrier to comply
with hours of service logging and break requirements. When a
Garmin eLog adapter is paired with your compatible mobile
device, you can view hours of service information on your dēzl
device. The Garmin eLog adapter is not available in all areas.
For more information, or to purchase a Garmin eLog adapter, go
to garmin.com/elog.
NOTE: Garmin eLog features are not available when using the
car vehicle profile.
The Dispatch and Track feature lets you share your trip with a
dispatcher or contacts from your smartphone and social
networking accounts. While you are sharing, viewers can track
your current location, your next destination and the path of your
recent travels in real time.
This feature requires a smartphone running the Smartphone
Link app.
NOTE: this feature is not available when using the car vehicle
profile.
Setting Up Garmin eLog Features On Your dēzl
Device
1 Pair your Garmin eLog adapter with the Garmin eLog app on
Setting up Dispatch and Track sharing
your mobile device (Setting Up Your Garmin eLog Device,
page 16).
2 Pair your dēzl device with your compatible mobile device
(Pairing with your phone and connecting to Smartphone Link,
page 12).
3 Enable the Garmin eLog app to pair with a dēzl device
(Enabling the Garmin eLog App to Pair with a dēzl Device,
page 16).
4 If necessary, enable the Garmin eLog connection on your
dēzl device (Enabling or Disabling the Garmin eLog
Connection on Your dēzl Device, page 16).
Setting Up Your Garmin eLog Device
You must set up and pair your Garmin eLog adapter with the
Garmin eLog app in order to use the device.
1 From the app store on your mobile device, install and open
the Garmin eLog app.
2 On your mobile device, follow the on-screen instructions to
set up and configure the Garmin eLog system.
NOTE: until you complete the setup process, the device has
limited functionality.
Enabling the Garmin eLog App to Pair with a dēzl Device
1 From the Garmin eLog app, log in to a driver profile.
2 Select Settings > Pair to Nearby Garmin dēzl.
16
The first time you use the Dispatch and Track feature, you must
set up the feature and invite a dispatcher.
1 Connect to Smartphone Link (Pairing with your phone and
connecting to Smartphone Link, page 12).
2 On your dēzl device, select Apps > Dispatch and Track.
3 Follow the on-screen instructions on your dēzl device to finish
setting up the feature.
Starting a Dispatch and Track session
NOTICE
Use caution when sharing your location information with others.
Before you can start sharing, you must set up the Dispatch and
Track feature (Setting up Dispatch and Track sharing, page 16).
You can start sharing your Dispatch and Track data using your
dēzl device or the Smartphone Link app.
• On your dēzl device, select Apps > Dispatch and Track >
Start.
• From the map on your dēzl device, select > Dispatch and
Track > Start.
• On your smartphone, open the Smartphone Link app and
select Dispatch and Track > Start Dispatch and Track.
A link to view your Dispatch and Track data is posted to your
enabled social network accounts, and an email with the link is
sent to your invited contacts. While you are sharing, viewers can
Vehicle and driver tools
click the link to track your current location and the path of your
recent travels in real time.
appears in the dēzl status bar while Dispatch and Track
sharing is active. The number of invited viewers also appears.
TIP: by default, the Dispatch and Track sharing session ends
automatically after 24 hours. In the Smartphone Link app, you
can select Dispatch and Track > Keep Activity Available to
extend the duration of the Dispatch and Track sharing session,
or you can stop sharing at any time.
Stopping Dispatch and Track sharing
You can stop Dispatch and Track sharing at any time using your
dēzl device or the Smartphone Link app.
• On your dēzl device, select Apps > Dispatch and Track >
Stop.
• On your smartphone, open the Smartphone Link app and
select Dispatch and Track > Stop Dispatch and Track.
Viewers receive a message that the Dispatch and Track session
has ended, and they can no longer track your location.
Sending a dispatch message to a dēzl device
Before you can send a dispatch message, the driver must set up
the Dispatch and Track feature (Setting up Dispatch and Track
sharing, page 16).
You can send a dispatch message directly to a dēzl device
using the Dispatch and Track feature. This can be useful for
sending updated information to a driver.
NOTE: this feature is not compatible with all smartphone
messaging apps.
1 Prepare an email or text message with updated dispatch
information.
2 Include the word "dezl" anywhere in the subject line or body
of the email or text message.
NOTE: the word "dezl" is not case-sensitive.
3 Send the email or text message to the driver's smartphone.
The message is displayed on the driver's dēzl device and can be
viewed while the vehicle is moving.
Starting a route using a dispatch message
When you receive a message from your dispatcher, you can
start a new route using received address information, if
available.
1 Select the message notification.
2 Select the address link from the body of the message.
The device searches for the address.
3 Select a location.
4 Select Go!.
The device calculates a route to the destination and starts a new
Dispatch and Track session.
IFTA
NOTE: this feature is not available in all areas.
Before you can use this feature, a lorry vehicle profile must be
active.
You can record data needed for International Fuel Tax
Agreement documentation (IFTA), such as fuel-purchase data
and miles driven.
Entering fuel data
1 Select Apps > IFTA > At the Pump.
2 Enter the fuel price per gallon.
3 Select the Fuel Used field.
4 Enter the amount of fuel purchased.
5 If necessary, select the fuel type:
Vehicle and driver tools
6
7
8
9
• To record the amount in litres, select Gallons > Litres >
Save.
• To record the amount in gallons, select Litres > Gallons >
Save.
If necessary, select the Tax Included tick box.
Select Next.
Select an option to record the fuel station where you
refuelled:
• Select a nearby fuel station from the list.
• Select the text field, and enter the fuel station name and
address.
Select the fuel purchaser.
Editing fuel data
1 Select Apps > IFTA > Fuel Journals.
2 If necessary, select a vehicle profile.
3 If necessary, select a quarter.
4 Select a fuel record.
5 Select an option:
• Select a field to edit the information.
• Select > Yes to delete the record.
Viewing and Exporting a Jurisdiction Summary
The jurisdiction summary lists data for every area in which your
vehicle has operated during each quarter. The jurisdiction
summary is available in some areas.
1 Select Apps > IFTA > Jurisdiction Summary.
2 If necessary, select a lorry.
3 If necessary, select a quarter.
4 Select > Export > OK to export a jurisdiction summary.
The device exports the summary to a .csv file and stores it in
the Reports folder on the device.
Editing and exporting trip reports
1 From the main menu, select Apps > IFTA > Trip Reports.
2 If necessary, select a lorry.
3 If necessary, select a quarter.
4 Select a report.
5 Select an option:
• Select
> Delete, and select the tick box to delete a
report.
• Select
> Combine, and select the tick boxes to
combine reports.
• Select
> Export > OK. The device exports the report to
a .csv file and stores it in the Reports folder on the
device.
Viewing Exported Jurisdiction Summaries and Trip
Reports
NOTICE
If you do not know the purpose of a file, do not delete it. Your
device memory contains important system files that should not
be deleted.
1 Connect the device to your computer.
2 From the file browser on your computer, browse to the
internal device storage and open the Reports folder.
3 Open the IFTA folder.
4 Open the .csv file.
Logging service history
You can log the date and odometer reading when service or
maintenance is performed on your vehicle. The device provides
17
several service categories, and you can add custom categories
(Adding service categories, page 18).
1 Select Apps > Service History.
2 Select a service category.
3 Select Add Record.
4 Enter the odometer reading, and select Next.
5 Enter a comment (optional).
6 Select Done.
Adding service categories
1 Select Apps > Service History.
2 Select > Add Category.
3 Enter a category name, and select Done.
Deleting service categories
When you delete a service category, all service records in the
category are also deleted.
1 Select Apps > Service History.
2 Select > Delete Categories.
3 Select the service categories to delete.
4 Select Delete.
Renaming service categories
1 Select Apps > Service History.
2 Select the category to be renamed.
3 Select > Rename Category.
4 Enter a name and select Done.
Deleting service records
1 Select Apps > Service History.
2 Select a service category.
3 Select > Delete Records.
4 Select the service records to be deleted.
5 Select Delete.
Editing a service record
You can edit the comment, odometer reading and date of a
service record.
1 Select Apps > Service History.
2 Select a category.
3 Select a field.
4 Enter the new information, and select Done.
Voice Command
NOTE: voice command is not available for all languages and
regions, and may not be available on all models.
NOTE: Voice Activated Navigation may not achieve desired
performance when in a noisy environment.
Voice command allows you to use your device by saying words
and commands. The voice command menu provides voice
prompts and a list of available commands.
Setting the wake-up phrase
The wake-up phrase is a word or phrase you can say to activate
voice command. The default wake-up phrase is Voice
Command.
TIP: you can reduce the chance of accidental voice command
activation by using a strong wake-up phrase.
1 Select Apps > Voice Command > > Wake-Up Phrase.
2 Enter a new wake-up phrase.
The device indicates the strength of the wake-up phrase as
you enter the phrase.
18
3 Select Done.
Activating voice command
Say your wake-up phrase.
The voice command menu appears.
Voice Command tips
• Speak in a normal voice directed at the device.
• Reduce background noise, such as voices or the radio, to
increase the accuracy of the voice recognition.
• Say commands as they appear on the screen.
• Respond to voice prompts from the device as needed.
• Increase the length of your wake-up phrase to reduce the
chance of accidental voice command activation.
• Listen for two tones to confirm when the device enters and
exits voice command.
Starting a route using Voice command
You can say the names of popular, well known locations.
1 Say your wake-up phrase (Setting the wake-up phrase,
page 18).
2 Say Find Place.
3 Listen for the voice prompt and say the name of the location.
4 Say the line number.
5 Say Navigate.
Muting Instructions
You can disable the voice prompts for voice command without
muting the device.
1 Select Apps > Voice Command > .
2 Select Mute Instructions > Enabled.
Voice Control
For regions where the Voice Command feature is unavailable,
the Voice Control feature is activated. Voice Control allows you
to use your voice to control the device. Before you can use the
Voice Control feature, you must configure it for your voice.
Configuring Voice Control
The Voice Control feature must be configured for a single user's
voice and does not work for other users.
1 Select Apps > Voice Control.
2 Follow the on-screen instructions to record commands for
each voice control phrase.
NOTE: you do not have to read the exact phrase on the
screen. You may say an alternative command with the same
meaning based on your preference.
To use a voice control feature, you must say the command you
recorded for the feature.
Using Voice Control
1 Say the command you recorded for the Voice Control
phrase.
The voice control menu appears.
2 Follow the on-screen instructions.
Voice control tips
• Speak in a normal voice directed at the device.
• Reduce background noise, such as voices or the radio, to
increase the accuracy of the voice recognition.
• Say commands as they appear on the screen.
• Listen for a tone to confirm when the device successfully
receives a command.
Voice Command
Using the apps
Viewing the Owner's Manual on Your Device
You can view the complete owner's manual on the device
screen in many languages.
1 Select Apps > Owner's Manual.
The owner's manual appears in the same language as the
software text (Language and Keyboard Settings, page 21).
2 Select to search the owner's manual (optional).
Viewing the lorry map
The lorry map highlights recognised lorry routes on the map,
such as the Surface Transportation Assistance Act (STAA)
preferred routes, TruckDown (TD) preferred routes, and nonradioactive hazardous materials (NRHM) routes. The recognised
routes vary based on your area and the map data loaded on
your device.
Select Apps > Lorry Map.
Viewing the weather forecast
Before you can use this feature, your device must be receiving
weather data. You can connect your device to the Smartphone
Link app to receive weather data (Pairing with your phone and
connecting to Smartphone Link, page 12).
1 Select Apps > Weather.
The device shows the current weather conditions and a
forecast for the next several days.
2 Select a day.
The detailed forecast for that day appears.
Viewing weather near a different town
1 Select Apps > Weather > Current Location.
2 Select an option:
• To view weather for a favourite town, select a town in the
list.
• To add a favourite town, select Add Town, and enter a
town name.
Viewing the weather radar
Before you can use this feature, you must purchase Advanced
Weather service using Smartphone Link.
You can view an animated, colour-coded radar map of current
weather conditions, as well as a weather icon on the map. The
weather icon changes to show weather in the vicinity, such as
rain, snow and thunderstorms.
1 Select Apps > Weather.
2 If necessary, select a town.
3 Select > Weather Radar.
Viewing weather alerts
Before you can use this feature, you must purchase Advanced
Weather service using Smartphone Link.
While you are travelling with your device, weather alerts may
appear on the map. You can also view a map of weather alerts
near your current location or near a selected town.
1 Select Apps > Weather.
2 If necessary, select a city.
3 Select > Weather Alerts.
Checking road conditions
Before you can use this feature, you must purchase Advanced
Weather service using Smartphone Link.
1 Select Apps > Weather.
2 If necessary, select a city.
Using the apps
3 Select
> Road Conditions.
Trip planner
You can use the trip planner to create and save a trip, which you
can navigate later. This can be useful for planning a delivery
route, a vacation, or a road trip. You can edit a saved trip to
further customise it, including reordering locations, optimising
the order of stops, adding suggested attractions and adding
shaping points.
You can also use the trip planner to edit and save your active
route.
Planning a trip
A trip can include many locations, and it must include at least a
starting point and a destination. The starting point is the location
from which you plan to start your trip. If you start navigating the
trip from a different location, the device gives you the option to
route to your starting point first. For a round trip, the starting
location and final destination can be the same.
1 Select Apps > Trip Planner > New Trip.
2 Select Select Start Location.
3 Choose a location for your starting point, and select Select.
4 Select Select Destination.
5 Choose a location for a destination, and select Select.
6 Select Add Location to add more locations (optional).
7 After you have added all the necessary locations, select Next
> Save.
8 Enter a name and select Done.
Editing and reordering locations in a trip
1 Select Apps > Trip Planner > Saved Trips.
2 Select a saved trip.
3 Select a location.
4 Select an option:
• To move the location up or down, select , and drag the
location to a new position in the trip.
• To add a new location after the selected location, select
.
• To remove the location, select .
Optimising the order of stops in a trip
The device can automatically optimise the order of stops in your
trip to create a shorter, more efficient route. The starting location
and final destination are not changed when you optimise the
order.
While editing a trip, select
> Optimise Order.
Discovering Attractions Along Your Trip
The device can suggest interesting or popular attractions to add
to your trip.
1 While editing a trip, select > Trip Settings > Suggest
Attractions.
2 Select an attraction to view more information.
3 Select Select to add the attraction to your trip.
Changing routing options for a trip
You can customise how the device calculates the route when
you start your trip.
1 Select Apps > Trip Planner > Saved Trips.
2 Select a saved trip.
3 Select > Trip Settings.
4 Select an option:
• To add shaping points to your trip, select Shape Route,
and follow the on-screen instructions (Shaping your route,
page 5).
19
• To change the calculation mode for the trip, select Route
Preference (Changing the route calculation mode,
page 5).
Navigating to a favourite trip
1 Select Apps > Trip Planner > Saved Trips.
2 Select a saved trip.
3 Select Go!.
4 Select the first location to navigate to, and select Start.
The device calculates a route from your current location to
the selected location, and then it guides you to the remaining
trip destinations in order.
Editing and saving your active route
If a route is active, you can use the trip planner to edit and save
your route as a trip.
1 Select Apps > Trip Planner > My Active Route.
2 Edit your route using any of the trip planner features.
The route recalculates each time you make a change.
3 Select Save to save your route as a trip, which you can
navigate again later (optional).
photoLive traffic cameras
Before you can use this feature, you must be connected to
Smartphone Link, and you must have a subscription to the
photoLive service (Subscribing to Garmin Live Services,
page 12).
photoLive traffic cameras provide live images of traffic
conditions on major roads and junctions.
The photoLive service is not available in all areas.
Viewing and Saving photoLive Traffic Cameras
You can view live images from nearby traffic cameras. You can
also save traffic cameras for areas you travel frequently.
1 Select Apps > photoLive.
2 Select Touch to Add
3 Select a road.
4 Select a traffic camera location.
A preview of the live image from the camera appears next to
a map of the camera's location. You can select the image
preview to view the full-sized image.
5 Select Save to save the camera (optional).
A thumbnail image preview of the camera is added to the
main screen of the photoLive app.
Viewing photoLive Traffic Cameras on the Map
The photoLive map tool shows traffic cameras from the road
ahead of you.
1 From the map, select > photoLive.
The device shows the live image from the nearest traffic
camera on the road ahead, along with the distance to the
camera. When you pass the camera, the device loads the
live image of the next camera on the road.
2 If no cameras are found for the road, select Find Cameras to
view or save nearby traffic cameras (optional).
Saving a traffic camera
1 Select Apps > photoLive.
2 Select Touch to Add.
3 Select a road.
4 Select a junction.
5 Select Save.
20
Viewing Previous Routes and Destinations
Before you can use this feature, you must enable the travel
history feature (Device and Privacy Settings, page 22).
You can view your previous routes and places where you have
stopped on the map.
Select Apps > Where I've Been.
dēzl settings
Map and vehicle settings
Select Settings > Map & Vehicle.
Vehicle: sets the vehicle icon that represents your position on
the map.
Driving Map View: sets the perspective on the map.
Map Detail: sets the level of detail on the map. More detail may
cause the map to be drawn more slowly.
Map Theme: changes the colour of the map data.
Map Tools: sets the shortcuts that appear in the map tools
menu.
Map Layers: sets the data that appears on the map page
(Customising the map layers, page 11).
Auto Zoom: automatically selects the zoom level for optimal use
of your map. When disabled, you must zoom in or out
manually.
myMaps: sets which installed maps the device uses.
Enabling maps
You can enable map products installed on your device.
TIP: to purchase additional map products, go to
http://buy.garmin.com.
1 Select Settings > Map & Vehicle > myMaps.
2 Select a map.
Navigation settings
Select Settings > Navigation.
Route Preview: shows a preview of the major roads in your
route when you start navigation.
Calculation Mode: sets the route calculation method.
Break Planning: shows suggested break times based on your
drive time.
Avoidances: sets road features to avoid on a route.
Custom Avoidances: allows you to avoid specific roads or
areas.
Dispatch and Track Auto Start: sets the Dispatch and Track
feature to start automatically when starting a route.
Toll Roads: sets preferences for avoiding toll roads.
Tolls and Fees: sets preferences for avoiding toll roads and toll
stickers.
NOTE: this feature is not available in all areas.
Environmental Zones: sets the avoidance preferences for
areas with environmental or emissions restrictions that may
apply to your vehicle.
Restricted Mode: disables all functions that require significant
operator attention.
GPS Simulator: stops the device from receiving a GPS signal
and saves battery power.
Calculation Mode Settings
Select Settings > Navigation > Calculation Mode.
The route calculation is based on road speeds and vehicle
acceleration data for a given route.
dēzl settings
Faster Time: calculates routes that are faster to drive but can
be longer in distance.
Shorter Distance: calculates routes that are shorter in distance
but can take more time to drive.
Off Road: calculates a direct line from your location to your
destination.
Setting a simulated location
If you are indoors or not receiving satellite signals, you can use
the GPS simulator to plan routes from a simulated location.
1 Select Settings > Navigation > GPS Simulator.
2 From the main menu, select View Map.
3 Tap the map twice to select an area.
The address of the location appears at the bottom of the
screen.
4 Select the location description.
5 Select Set Location.
Wireless network settings
The wireless network settings allow you to manage Wi‑Fi
networks, paired Bluetooth devices and Bluetooth features.
Select Settings > Wireless Networks.
Bluetooth: enables Bluetooth wireless technology.
Paired Device Name: the names of paired Bluetooth devices
appear in the menu. You can select a device name to change
Bluetooth feature settings for that device.
Search for Devices: searches for nearby Bluetooth devices.
Friendly Name: allows you to enter a friendly name that
identifies your device on other devices with Bluetooth
wireless technology.
Wi-Fi: enables the Wi‑Fi radio.
Saved Networks: allows you to edit or remove saved networks.
Search for Networks: searches for nearby Wi‑Fi networks
(Connecting to a Wi‑Fi Network, page 22).
®
Driver Assistance Settings
Select Settings > Driver Assistance.
Audible Driver Alerts: enables an audible alert for each type of
driver alert (Driver awareness features and alerts, page 2).
Fatigue Warning: alerts you when you have been driving for a
long period without a break.
Proximity Alerts: alerts you when you are near custom points
of interest or red light cameras.
NOTE: you must have custom points of interest (POIs)
loaded for proximity points alerts to display. This feature is
not available in all areas.
Backup camera settings
The backup camera settings allow you to manage paired
Garmin backup cameras and camera settings. This menu
appears on your navigation device only when the device is
connected to a wireless camera receiver cable. See the owner's
manual for your backup camera for detailed information about
pairing cameras and camera settings. Go to garmin.com
/backupcamera to purchase a Garmin backup camera.
Select Settings > Backup Camera, and select a paired camera.
Unpair: removes the paired camera. You must pair the camera
again before you can view it using this device and cable.
Rename: allows you to rename the paired camera.
Guidance Lines: shows or hides guidance lines and allows you
to adjust the position of the guidance lines.
dēzl settings
Display settings
Select Settings > Display.
Orientation: allows you to set the display to portrait (vertical) or
landscape (horizontal).
NOTE: this feature is not available on all product models.
Colour Mode: allows you to select day or night colour mode. If
you select the Auto option, the device automatically switches
to day or night colours based on the time of day.
Brightness: allows you to adjust the display brightness.
Display Timeout: allows you to set the amount of idle time
before your device enters sleep mode while using battery
power.
Screenshot: allows you to take a picture of the device screen.
Screenshots are saved in the Screenshot folder of the device
storage.
Traffic Settings
From the main menu, select Settings > Traffic.
Traffic: enables traffic.
Current Provider: sets the traffic provider to use for traffic data.
The Auto option selects the best available traffic data
automatically.
Subscriptions: lists the current traffic subscriptions.
Optimise Route: enables the device to use optimised
alternative routes automatically or upon request (Avoiding
traffic delays on your route, page 5).
Traffic Alerts: sets the traffic delay severity for which the device
displays a traffic alert.
Units and time settings
To open the Units and Time settings page, from the main menu,
select Settings > Units & Time.
Current Time: sets the device time.
Time Format: allows you to select a 12-hour, 24-hour or UTC
display time.
Units: sets the unit of measure used for distances.
Position Format: sets the co-ordinate format and datum used
for geographical co-ordinates.
Setting the Time
1 From the main menu, select the time.
2 Select an option:
• To set the time automatically using GPS information,
select Automatic.
• To set the time manually, drag the numbers up or down.
Language and Keyboard Settings
To open the Language and Keyboard settings, from the main
menu, select Settings > Language & Keyboard.
Voice Language: sets the language for voice prompts.
Text Language: sets all on-screen text to the selected
language.
NOTE: changing the text language does not change the
language of user-entered data or map data, such as street
names.
Keyboard Language: enables keyboard languages.
Proximity alerts settings
NOTE: you must have custom points of interest (POIs) loaded
for proximity points alerts to display.
NOTE: this feature is not available in all areas.
Select Settings > Proximity Alerts.
21
Audio: sets the style of alert that plays when you approach
proximity points.
Alerts: sets the type of proximity points for which alerts are
played.
Device and Privacy Settings
Select Settings > Device.
About: displays the software version number, the unit ID
number and information on several other software features.
Regulatory: displays regulatory markings and information.
EULAs: displays the end-user licence agreements.
NOTE: you need this information when you update the
system software or purchase additional map data.
Device Data Reporting: shares anonymous data to improve the
device.
Position Reporting: shares your position information with
Garmin to improve content.
Travel History: allows the device to record information for the
myTrends Where I’ve Been and Trip Log features.
Clear Travel History: clears your travel history for the
myTrends Where I’ve Been and Trip Log features.
Restoring settings
You can restore a category of settings or all settings to the
factory default values.
1 Select Settings.
2 If necessary, select a settings category.
3 Select > Restore.
Device information
Viewing Regulatory and Compliance
Information
1 From the settings menu, swipe to the bottom of the menu.
2 Select Device > Regulatory.
Specifications
Operating
temperature range
From -20° to 55°C (from -4° to 131°F)
Charging
temperature range
From 0° to 45°C (from 32° to 113°F)
Power input
Vehicle power using the included vehicle power
cable. AC power using an optional accessory
(for home and office use only).
Battery type
Rechargeable lithium-ion
Charging the Device
NOTE: this Class III product shall be powered by an LPS power
supply.
You can charge the battery in the device using any of these
methods.
• Connect the device to vehicle power.
• Connect the device to an optional power adapter accessory,
such as a wall power adapter.
You can purchase an approved Garmin AC-DC adapter
suitable for home or office use from a Garmin dealer or
www.garmin.com. The device may charge slowly when
connected to a third-party adapter.
22
Device maintenance
Garmin Support Centre
Go to support.garmin.com for help and information, such as
product manuals, frequently asked questions, videos and
customer support.
Map and Software Updates
For the best navigation experience, you should keep the maps
and software on your device up to date. Map updates ensure
your device has the latest available map data. Software updates
provide improvements to features and performance.
You can update your device using two methods.
• You can connect the device to a Wi‑Fi network to update
directly on the device (recommended). This option allows you
to update your device conveniently without connecting it to a
computer.
• You can connect the device to a computer and update it
using the Garmin Express application. This option allows you
to install map data onto a memory card if the updated maps
are too large to fit on the internal storage.
Connecting to a Wi‑Fi Network
The first time you turn on the device, it prompts you to connect
to a Wi‑Fi network and register your device. You can also
connect to a Wi‑Fi network using the settings menu.
1 Select Settings > Wireless Networks.
2 If necessary, select Wi-Fi to enable Wi‑Fi technology.
3 Select Search for Networks.
The device displays a list of nearby Wi‑Fi networks.
4 Select a network.
5 If necessary, enter the password for the network, and select
Done.
The device connects to the network, and the network is added to
the list of saved networks. The device reconnects to this network
automatically when it is within range.
Updating Maps and Software Using a Wi‑Fi Network
NOTICE
Map and software updates may require the device to download
large files. Regular data limits or charges from your Internet
service provider apply. Contact your Internet service provider for
more information about data limits or charges.
You can update the maps and software by connecting your
device to a Wi‑Fi network that provides access to the Internet.
This allows you to keep your device up to date without
connecting it to a computer.
1 Connect the device to a Wi‑Fi network (Connecting to a Wi‑Fi
Network, page 22).
While connected to a Wi‑Fi network, the device checks for
available updates. When an update is available, appears
on the Settings icon in the main menu.
2 Select Settings > Updates.
The device checks for available updates. When an update is
available, Update Available appears below Map or Software.
3 Select an option:
• To install all available updates, select Install All.
• To install only map updates, select Map > Install All.
• To install only software updates, select Software > Install
All.
4 Read the licence agreements, and select Accept All to
accept the agreements.
Device information
NOTE: if you do not agree with the licence terms, you can
select Reject. This stops the update process. You cannot
install updates until you accept the licence agreements.
5 Using the included USB cable, connect the device to external
power, and select Continue (Charging the Device, page 22).
For the best results, a USB wall charger that provides at least
1 A power output is recommended. Many USB power
adapters for smartphones, tablets, or portable media devices
may be compatible.
6 Keep the device connected to external power and within
range of the Wi‑Fi network until the update process is
complete.
TIP: if a map update is interrupted or cancelled before it
completes, your device may be missing map data. To repair
missing map data, you must update the maps again using either
Wi‑Fi or Garmin Express.
Updating Maps and Software with Garmin Express
You can use Garmin Express software to download and install
the latest map and software updates for your device. Garmin
Express is available for Windows and Mac computers.
1 On your computer, go to www.garmin.com/express.
®
®
NOTE: if a map update is too large for the internal storage of
the device, the software may prompt you to install a microSD
card in your device to add storage space (Installing a
memory card for maps and data, page 24).
®
The Garmin Express software downloads and installs the
updates onto your device. Map updates are very large, and this
process may take a long time on slower Internet connections.
Device Care
NOTICE
Avoid dropping your device.
Do not store the device where prolonged exposure to extreme
temperatures can occur, as it can cause permanent damage.
Never use a hard or sharp object to operate the touchscreen as
this may result in damage.
Do not expose the device to water.
Cleaning the outer casing
2 Select an option:
• To install on a Windows computer, select Download for
Windows.
• To install on a Mac computer, select Download for Mac.
3 Open the downloaded file, and follow the on-screen
instructions to complete the installation.
4 Start Garmin Express.
5 Connect your dēzl device to your computer using a USB
cable.
NOTICE
Avoid chemical cleaners and solvents that can damage plastic
components.
1 Clean the outer casing of the device (not the touchscreen)
using a cloth dampened with a mild detergent solution.
2 Wipe the device dry.
Cleaning the Touchscreen
1 Use a soft, clean, lint-free cloth.
2 If necessary, lightly dampen the cloth with water.
3 If using a dampened cloth, turn off the device and disconnect
the device from the power.
4 Gently wipe the screen with the cloth.
Avoiding theft
6 When your dēzl device prompts you to enter file transfer
mode, select Yes.
7 On your computer, click Add a Device.
The Garmin Express software detects your device.
8 Click Add Device.
9 Follow the on-screen instructions to register your device and
add it to the Garmin Express software.
When setup is complete, the Garmin Express software
searches for map and software updates for your device.
10 Select an option:
• To install all available updates, click Install All.
• To install a single update, click View Details and select an
update.
Device maintenance
• Remove the device and mount from sight when not in use.
• Remove the residue left on the windscreen by the suction
cup.
• Do not keep your unit in the glove compartment.
• Register your device using the Garmin Express software
(garmin.com/express).
Resetting the device
You can reset your device if it stops functioning.
Hold the power key for 12 seconds.
Removing the Device, Mount and Suction
Cup
Removing the Device from the Mount
1 Press the release tab or button on the mount.
2 Tilt the bottom of the device upward, and lift the device from
the mount.
23
Removing the Mount from the Suction Cup
1 Turn the device mount to the right or left.
2 Apply pressure until the socket on the mount releases the
ball on the suction cup.
Removing the Suction Cup from the Windscreen
1 Flip the lever on the suction cup towards you.
2 Pull the tab on the suction cup towards you.
Changing the Fuse in the Vehicle Power
Cable
NOTICE
When replacing the fuse, do not lose any of the small pieces
and make sure they are put back in the proper position. The
vehicle power cable does not work unless it is assembled
correctly.
If your device does not charge in your vehicle, you may need to
replace the fuse located at the tip of the vehicle adapter.
1 Rotate the end piece À anti-clockwise to unlock it.
TIP: you may need to use a coin to remove the end piece.
2 Remove the end piece, the silver tip Á, and the fuse Â.
3 Insert a new fast-blow fuse that has the same current, such
as 1 A or 2 A.
4 Place the silver tip in the end piece.
5 Push in the end piece and rotate it clockwise to lock it back
into the vehicle power cable Ã.
Troubleshooting
The suction cup will not stay on my
windscreen
1 Clean the suction cup and windscreen with surgical spirit.
2 Dry with a clean, dry cloth.
3 Mount the suction cup (Mounting and powering the dēzl
device in your vehicle, page 1).
My device is not acquiring satellite signals
• Verify the GPS simulator is turned off (Navigation settings,
page 20).
• Take your device out of multi-storey car parks and away from
tall buildings and trees.
• Remain stationary for several minutes.
The device does not charge in my vehicle
• Check the fuse in the vehicle power cable (Changing the
Fuse in the Vehicle Power Cable, page 24).
• Verify that the vehicle is turned on and is supplying power to
the power outlet.
• Verify that the interior temperature of the vehicle is within the
charging temperature range indicated in the specifications.
• Verify that the fuse is not broken in the vehicle power socket.
My battery does not stay charged for very
long
• Decrease the screen brightness (Display settings, page 21).
• Shorten the display timeout (Display settings, page 21).
24
• Decrease the volume (Adjusting the volume, page 2).
• Turn off the wi-fi radio when it is not in use (Wireless network
settings, page 21).
• Put the device in power saving mode when not in use
(Turning the device on or off, page 1).
• Keep your device away from extreme temperatures.
• Do not leave your device in direct sunlight.
My device does not connect to my phone or
Smartphone Link
• Select Settings > Wireless Networks.
The Bluetooth option must be enabled.
• Enable Bluetooth wireless technology on your phone and
bring your phone within 10 m (33 ft.) of the device.
• On your smartphone, open the Smartphone Link app, and
select > to restart the Smartphone Link background
services.
• Verify your phone is compatible.
Go to www.garmin.com/bluetooth for more information.
• Complete the pairing process again.
To repeat the pairing process, you must unpair your phone
and device (Deleting a paired phone, page 14), and complete
the pairing process (Pairing with your phone and connecting
to Smartphone Link, page 12).
The Smartphone Link app affects the battery
charge level on my smartphone
The Smartphone Link app uses Bluetooth wireless technology to
send data to and receive data from your device. It is normal for
an active Bluetooth connection to consume some battery power.
The app also periodically checks for updates to available
services, which may consume additional battery power.
You can change the battery usage settings in the Smartphone
Link app to reduce the amount of battery power the app uses.
1 From the Smartphone Link app on your smartphone, select
.
2 Scroll to the Battery Usage section, and select Settings.
3 Select one or more options:
• Clear the Bluetooth Auto-Connect tick box.
Disabling this option may save a small amount of battery
power, but it prevents the app from connecting to your
dēzl device automatically. While this option is disabled,
you must select from the Smartphone Link main menu
each time you want to connect your device to Smartphone
Link.
• Clear the Live Services Check tick box.
On some smartphones, disabling this option may
significantly reduce the battery power used by the app.
While this option is disabled, you must manually refresh
the Smartphone Link main menu to receive updated
information about available live services.
Appendix
Installing a memory card for maps and data
You can install a memory card to increase the storage space for
maps and other data on your device. You can purchase memory
cards from an electronics supplier, or go to www.garmin.com
/maps to purchase a memory card with pre-loaded Garmin
mapping software. The device supports microSD memory cards
from 4 to 64 GB.
1 Locate the map and data memory card slot on your device
(dēzl 580 device overview, page 1).
Troubleshooting
2 Insert a memory card into the slot.
3 Press it in until it clicks.
Purchasing accessories
Go to garmin.com/accessories.
Data management
You can store files on your device. The device has a memory
card slot for additional data storage.
NOTE: the device is not compatible with Windows 95, 98, Me,
Windows NT and Mac OS 10.3 or earlier.
®
About Memory Cards
You can purchase memory cards from an electronics supplier,
or purchase pre-loaded Garmin mapping software
(www.garmin.com). In addition to map and data storage, the
memory card can be used to store files such as maps, images,
geocaches, routes, waypoints, and custom POIs.
Connecting the Device to Your Computer
You can connect the device to your computer using a USB
cable.
1 Plug the small end of the USB cable into the port on the
device.
2 Plug the larger end of the USB cable into a port on your
computer.
3 When your dēzl device prompts you to enter file transfer
mode, select Yes.
A picture of your device connected to a computer appears on
the device screen.
Depending on your computer operating system, the device
appears as either a portable device, a removable drive, or a
removable volume.
Transferring data from your computer
1 Connect the device to your computer (Connecting the Device
2
3
4
5
6
to Your Computer, page 25).
Depending on your computer operating system, the device
appears as either a portable device, a removable drive or a
removable volume.
On your computer, open the file browser.
Select a file.
Select Edit > Copy.
Browse to a folder on the device.
NOTE: for a removable drive or volume, you should not place
files in the Garmin folder.
Select Edit > Paste.
Disconnecting the USB cable
If your device is connected to your computer as a removable
drive or volume, you must safely disconnect your device from
your computer to avoid data loss. If your device is connected to
your Windows computer as a portable device, it is not necessary
to safely disconnect.
1 Complete an action:
• For Windows computers, select the Safely Remove
Hardware icon in the system tray and select your device.
• For Mac computers, drag the volume icon to the rubbish
bin.
2 Disconnect the cable from your computer.
Viewing GPS signal status
Hold
for three seconds.
Purchasing additional maps
1 Go to your device product page at garmin.com.
2 Click the Maps tab.
3 Follow the on-screen instructions.
Appendix
25
Index
Symbols
2-D map view 11
3-D map view 11
A
accessories 25
active lane guidance 4
addresses, finding 8
alerts 2
audio 21
proximity points 21
answering calls 13
audio, proximity points 21
automatic volume, enabling 2
avoidances 6
area 6
deleting 6
disabling 6
road 6
road features 6
tolls 5
B
backup camera 21
battery
charging 1, 22, 24
maximising 24
problems 24
Bluetooth technology 11, 13, 16, 24
disconnecting a device 14
pairing a phone 12
settings 21
Bluetooth Technology 12
disabling calls 14
managing phones 14
break planning 15, 16
breakdown directory 6
brightness 2
C
calls 13
answering 13
contacts 13
dialling 13
history 13
home 14
placing 13
cameras
backup 21
red light 3
speed 3
changing the search area 7
charging the device 24
charging your device 1, 22
cleaning the device 23
cleaning the touchscreen 23
computer, connecting 25
connecting 22
coordinates 8
current location 9
D
deleting
paired Bluetooth device 14
service categories 18
service records 18
trips 19
destinations 20. See locations
arriving 4
detours 5
device care 23
diagnostics 16
dialling 13
directions 4
disconnecting, Bluetooth device 14
Dispatch and Track 16, 17
display settings 21
driver alerts 2, 3
26
driving directions 4
E
editing, favourite trips 19
emergency services 9
EULAs 22
exporting
jurisdiction summaries 17
trip reports 17
F
favourite locations 20
categories 9
deleting 10
editing 9
files, transferring 25
finding locations. 6, 7, 9, 12 See also locations
addresses 8
categories 7
coordinates 8
junctions 8
towns 8
Foursquare 8, 9
fuel, stations 9
fuel data 17
fuse, changing 24
G
Garmin Connect 11
Garmin Express, updating software 23
Garmin Live Services 12
subscribing 12
geocaching 8
going home 4
GPS 1, 25
H
hands-free phone calls 12, 14
history 9
home
calling 14
editing location 4
going 4
phone number 13
hours of service 16
I
icons, status bar 1
ID number 22
initial setup 16
International Fuel Tax Agreement (IFTA) 17
exported summaries and reports 17
fuel data 17
jurisdiction summary 17
trip reports 17
J
junctions, finding 8
jurisdiction summary 17
K
keyboard
language 21
layout 21
L
language
keyboard 21
voice 21
latitude and longitude 8
location 8
locations 8, 20
calling 13
current 9
history 9
saving 9
searching for 6, 8
simulated 21
venues 7
lorry
map 19
points of interest 6
profiles 2
trailer 2
M
malfunctions 16
map layers, customising 11
map view
2-D 11
3-D 11
maps 4, 10, 11, 20
data field 4, 11
detail level 20
layers 11
lorry 19
purchasing 25
symbols 4
theme 20
tools 10
updating 22, 23
viewing routes 4
memory card 1, 25
installing 24
microSD card 1, 24
mount, removing 24
mounting the device
removing from mount 23
suction cup 1, 24
vehicle 1
muting, audio 18
myTrends, routes 5
N
navigation 4, 7
off-road 6
settings 20
next turn 4
notifications 12–14, 16
O
off-road navigation 6
on-screen buttons 2
owner's manual 19
P
pairing 16
disconnecting 14
phone 12, 24
parking 4, 7, 8
last spot 5
phone
disconnecting 14
pairing 12, 24
phone book 13
phone calls 13
answering 13
dialling 13
muting 13
voice dial 13
photoLive 20
points of interest (POI) 6, 8, 9
trucking 6
Points of interest (POI) 7–9
venues 7
power cables 22
changing the fuse 24
vehicle 1
power key 1
product support 19
profiles
activating 2
lorry 2
proximity points alerts, settings 21
Q
Quick Search 7
R
red light cameras 3
removing mount 24
reports, trip 17
Index
resetting
device 23
trip data 11
restoring settings 22
restrictions, vehicle 2
road conditions, weather 19
route summary 4
routes 3
adding a point 5, 20
calculating 5
calculation mode 19, 20
myTrends 5
shaping 5
starting 3, 4, 7, 17
stopping 5
suggested 5
viewing on the map 4
S
satellite signals
acquiring 1
viewing 25
saving, current location 9
screen, brightness 2
screenshots 21
search bar 6
service history
categories 18
deleting 18
editing 18
records 17, 18
settings 20–22
shaping a route 5
sharing, Dispatch and Track 16, 17
shortcuts
adding 9
deleting 9
simulated locations 21
sleep mode 1
Smartphone Link 12, 14, 15
connecting 12, 14
disabling calls 14
software
updating 22, 23
version 22
specifications 22
speech recognition 18
speed cameras 3
subscriptions, Garmin Live Services 12
suction cup 24
up ahead 10
customising 10
updating
maps 22, 23
software 22, 23
USB, disconnecting 25
V
vehicle power cable 1
vehicle profile, lorry 2
venues 7
voice command 18
activating 18
navigating with 18
tips for using 18
wake-up phrase 18
voice control 18
tips 18
volume, adjusting 2
W
warning icons 10, 11
weather 19
radar 19
road conditions 19
Where Am I? 9
Wi‑Fi 21, 22
wireless camera 21
Y
your current location 9
T
theft, avoiding 23
time settings 21
timer 16
tolls, avoiding 5
tools, maps 10
traffic 11, 15, 21
adding subscriptions 15
alternative route 5
cameras 20
incidents 11, 15
map 11, 15
receiver 15
searching for delays 11, 15
traffic cameras, view 20
travel history 22
trip information 11
resetting 11
viewing 11
trip log, viewing 11
trip planner 19, 20
editing a trip 19
shaping points 19
TripAdvisor 9
troubleshooting 24
U
unit ID 22
Index
27
support.garmin.com
October 2018
190-02229-00_0C
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising