Garmin | zūmo® 346 LMT-S | Owner's Manual | Garmin zūmo® 346 LMT-S Owner's Manual

Garmin zūmo® 346 LMT-S Owner's Manual
ZŪMO 396
®
Owner’s manual
© 2018 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its
products and to make changes in the content of this manual without obligation to notify any person or organisation of such changes or improvements. Go to www.garmin.com for current updates
and additional information concerning the use of this product.
Garmin and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. zūmo , Garmin Express™ and TracBack are trademarks of Garmin Ltd.
or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
®
®
®
Android™ is a trademark of Google Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such name by Garmin is under licence. Foursquare is a
trademark of Foursquare Labs, Inc. in the U.S. and in other countries. microSD is a trademark of SD-3C. Windows is a registered trademark of Microsoft Corporation in the United States and/or
other countries. Mac is a trademark of Apple Computer, Inc. The Pandora logos are trademarks of Pandora Media, Inc. Pandora is only available in certain countries. Please visit
http://www.pandora.com/legal. TripAdvisor is a registered trademark of TripAdvisor LLC. Windows , Windows Vista and Windows XP are registered trademarks of Microsoft Corporation in the
United States and other countries. Wi‑Fi is a registered trademark of Wi-Fi Alliance.
®
®
®
®
®
®
®
®
®
®
Table of contents
Installation...................................................................... 1
Mounting your device in a motorcycle ........................................ 1
Powered Motorcycle Mount ................................................... 1
Installing the Handlebar Base ................................................ 1
Attaching the Power Cables to the Motorcycle Mount ........... 1
Attaching the Base Plate to the Motorcycle Mount ................ 2
Attaching the Base Plate to the Handlebar Base ................... 2
Installing your device in the motorcycle mount ...................... 2
Removing Your Device from the Motorcycle Mount ................... 2
Mounting Your Device in an Automobile .................................... 2
Getting started................................................................ 3
Device Overview ......................................................................... 3
Turning the device on or off ........................................................ 3
Acquiring GPS signals ................................................................ 3
Status bar icons .......................................................................... 3
Using the on-screen buttons ....................................................... 3
Adjusting the volume .................................................................. 3
Using the audio mixer ............................................................ 3
Adjusting the screen brightness ................................................. 3
Rider Awareness Features and Alerts .......................... 4
Enabling or Disabling Rider Alerts .............................................. 4
Red light and speed cameras ..................................................... 4
Incident Detection and Notifications ........................................... 4
Setting Up an Incident Contact .............................................. 4
Cancelling an Incident Notification ......................................... 5
Disabling Incident Notifications .............................................. 5
Viewing Helmet Law Notifications ............................................... 5
Searching for Helmet Laws ......................................................... 5
Navigating to your destination...................................... 5
Routes ........................................................................................ 5
Starting a route ........................................................................... 5
Changing the route calculation mode .................................... 5
Taking a Route Using Adventurous Routing .......................... 5
Starting a route by using the map .......................................... 5
Going home ........................................................................... 5
Your route on the map ................................................................ 5
Active lane guidance .............................................................. 6
Viewing turns and directions .................................................. 6
Viewing the Entire Route on the Map .................................... 6
Arriving at your destination ......................................................... 6
Parking Near Your Destination .............................................. 6
Finding your last parking spot ................................................ 6
Changing Your Active Route ...................................................... 6
Adding a location to your route .............................................. 6
Shaping your route ................................................................. 6
Taking a Detour ..................................................................... 7
Stopping the route ...................................................................... 7
Using Suggested Routes ............................................................ 7
Avoiding Delays, Tolls and Areas ............................................... 7
Avoiding traffic delays on your route ...................................... 7
Avoiding toll roads .................................................................. 7
Avoiding toll stickers .............................................................. 7
Avoiding road features ........................................................... 7
Custom avoidances ............................................................... 7
Navigating off road ...................................................................... 8
Fuel tracking ............................................................................... 8
Enabling fuel tracking ............................................................. 8
Setting a low-fuel warning ...................................................... 8
Resetting the Fuel Tank Mileage ........................................... 8
Enabling dynamic fuel stops .................................................. 8
Finding and saving locations........................................ 8
Points of Interest ......................................................................... 8
Finding a location using the search bar ...................................... 8
Table of contents
Finding a location by category .................................................... 8
Searching within a category ................................................... 8
Navigating to points of interest within a venue ...................... 9
Location Search Results ............................................................. 9
Location Search Results on the Map ..................................... 9
Changing the search area .......................................................... 9
Parking ........................................................................................9
Finding Parking Near Your Current Location ......................... 9
Finding Parking Near a Specified Location ............................ 9
Understanding Parking Colours and Symbols ..................... 10
Search tools .............................................................................. 10
Finding an address .............................................................. 10
Finding a junction ................................................................. 10
Finding a town ...................................................................... 10
Finding a location using coordinates ................................... 10
Foursquare ............................................................................... 10
Connecting to your Foursquare account .............................. 10
Searching Foursquare points of interest .............................. 10
Viewing Foursquare location details .................................... 10
Checking in with Foursquare ............................................... 10
TripAdvisor® ............................................................................. 10
Finding TripAdvisor points of interest ................................... 10
Viewing history .......................................................................... 10
Clearing the list of recently found places ............................. 10
Viewing current location information ......................................... 10
Finding emergency services and fuel .................................. 11
Getting directions to your current location ........................... 11
Adding a shortcut ...................................................................... 11
Removing a shortcut ............................................................ 11
Saving Locations ...................................................................... 11
Saving a location .................................................................. 11
Saving your current location ................................................ 11
Editing a favourite location ................................................... 11
Assigning categories to a saved location ............................. 11
Deleting a favourite location ................................................ 11
Using the Map............................................................... 11
Map Tools ................................................................................. 11
Viewing a map tool ............................................................... 12
Enabling map tools .............................................................. 12
Up ahead .................................................................................. 12
Viewing upcoming locations ................................................. 12
Customising the up ahead categories ................................. 12
Trip information ......................................................................... 12
Viewing trip data from the map ............................................ 12
Viewing the trip information page ........................................ 12
Viewing the trip log ............................................................... 12
Resetting trip information ..................................................... 12
Viewing upcoming traffic ........................................................... 12
Viewing traffic on the map .................................................... 12
Searching for traffic incidents ............................................... 12
Customising the map ................................................................ 13
Customising the map layers ................................................. 13
Changing the map data field ................................................ 13
Changing the map perspective ............................................ 13
Live services, traffic and smartphone features ......... 13
Pairing with your phone and connecting to Smartphone Link .. 13
Bluetooth Feature status icons ................................................. 13
Garmin Live Services ................................................................ 13
Subscribing to Garmin Live Services ................................... 13
Pairing Your Phone and Headset ............................................. 14
Sending a Location from Your Smartphone to Your Device ..... 14
Smart notifications .................................................................... 14
Receiving notifications ......................................................... 14
Viewing the list of notifications ............................................. 14
Hands-free calling ..................................................................... 15
Placing a call ........................................................................ 15
i
Receiving a call .................................................................... 15
Using the call history ............................................................ 15
Using in-call options ............................................................. 15
Saving a home phone number ............................................. 15
Setting up Bluetooth features for your Apple device ................ 15
Connecting to the Smartphone Link app on your Apple
device ................................................................................... 15
Disabling hands-free calling for your Apple device .............. 15
Disabling Smartphone Link data and smart notifications for
your Apple device ................................................................ 15
Setting up Bluetooth features for your smartphone with
Android™ .................................................................................. 16
Connecting to the Smartphone Link app on your Android
smartphone .......................................................................... 16
Disabling Bluetooth features for your smartphone with
Android ................................................................................. 16
Disconnecting a Bluetooth device ............................................ 16
Deleting a paired phone ........................................................... 16
Traffic............................................................................ 16
Receiving Traffic Data Using Smartphone Link ........................ 16
Receiving traffic data using a traffic receiver ............................ 16
Traffic Receiver Subscriptions ............................................. 16
Enabling traffic .......................................................................... 17
Viewing traffic on the map ........................................................ 17
Searching for traffic incidents ............................................... 17
Using the apps.............................................................. 17
Viewing the Owner's Manual on Your Device ........................... 17
Trip planner ............................................................................... 17
Planning a trip ...................................................................... 17
Editing and reordering locations in a trip ............................. 17
Discovering Attractions Along Your Trip .............................. 17
Changing routing options for a trip ....................................... 17
Navigating to a favourite trip ................................................ 17
Editing and saving your active route .................................... 17
Sharing a Route ........................................................................ 17
LiveTrack .................................................................................. 18
Setting Up LiveTrack Sharing and Inviting Viewers ............. 18
Starting LiveTrack Sharing ................................................... 18
Tracks ....................................................................................... 18
Viewing and saving track information .................................. 18
Media player ............................................................................. 18
Adding the Media Player Tool to the Map ............................ 18
Changing the Media Source ................................................ 18
Pandora Service .................................................................. 18
Using the compass ................................................................... 19
TracBack® ................................................................................ 19
Following your recent track .................................................. 19
Saving your recent track as a trip ........................................ 19
Viewing the weather forecast ................................................... 19
Viewing weather near a different town ................................. 19
Viewing the weather radar ................................................... 19
Viewing weather alerts ......................................................... 19
Checking road conditions ..................................................... 19
Creating a Round-Trip Route .................................................... 19
photoLive traffic cameras .......................................................... 19
Viewing and Saving photoLive Traffic Cameras .................. 20
Viewing photoLive Traffic Cameras on the Map .................. 20
Saving a traffic camera ........................................................ 20
Viewing Previous Routes and Destinations .............................. 20
Bluetooth settings ..................................................................... 20
Wi‑Fi® settings ......................................................................... 20
Driver Assistance Settings ........................................................ 21
Display settings ......................................................................... 21
Traffic Settings .......................................................................... 21
Units and time settings ............................................................. 21
Setting the Time ................................................................... 21
Language and Keyboard Settings ............................................ 21
Device and privacy settings ...................................................... 21
Restoring settings ..................................................................... 21
Device information....................................................... 21
Viewing Regulatory and Compliance Information ..................... 21
Specifications ............................................................................ 21
Charging the Device ................................................................. 21
Device maintenance ..................................................... 22
Garmin Support Centre ............................................................. 22
Map and Software Updates ...................................................... 22
Connecting to a Wi‑Fi Network ............................................ 22
Updating Maps and Software Using a Wi‑Fi Network .......... 22
Product updates ................................................................... 22
Device Care .............................................................................. 23
Cleaning the outer casing .................................................... 23
Cleaning the Touchscreen ................................................... 23
Avoiding theft ....................................................................... 23
Resetting the device ................................................................. 23
Removing the Device, Mount and Suction Cup ........................ 23
Removing the Device from the Mount .................................. 23
Removing the Mount from the Suction Cup ......................... 23
Removing the Suction Cup from the Windscreen ................ 23
Changing the Fuse in the Vehicle Power Cable ....................... 23
Troubleshooting........................................................... 23
The suction cup will not stay on my windscreen ....................... 23
My device is not acquiring satellite signals ............................... 24
The device does not charge in my vehicle ............................... 24
My battery does not stay charged for very long ........................ 24
My device does not connect to my phone or Smartphone
Link ........................................................................................... 24
My device does not appear as a removable drive on my
computer ................................................................................... 24
My device does not appear as a portable device on my
computer ................................................................................... 24
My device does not appear as either a portable device or a
removable drive or volume on my computer ............................. 24
The Smartphone Link app affects the battery charge level on my
smartphone ............................................................................... 24
Appendix ....................................................................... 24
Installing a memory card for maps and data ............................ 24
Data management .................................................................... 25
About Memory Cards ........................................................... 25
Connecting the Device to Your Computer ........................... 25
Transferring data from your computer ................................. 25
Disconnecting the USB cable .............................................. 25
Viewing GPS signal status ........................................................ 25
Purchasing additional maps ..................................................... 25
Purchasing accessories ............................................................ 25
Index.............................................................................. 26
zūmo settings............................................................... 20
Map and vehicle settings .......................................................... 20
Enabling maps ..................................................................... 20
Navigation settings ................................................................... 20
Calculation Mode Settings ................................................... 20
Setting a simulated location ................................................. 20
ii
Table of contents
Installation
Mounting your device in a motorcycle
Powered Motorcycle Mount
WARNING
Garmin strongly recommends having an experienced installer
with the proper knowledge of electrical systems install the
device. Incorrectly wiring the power cable can result in damage
to the vehicle or the battery and can cause bodily injury.
See the Important safety and product information guide in the
product box for product warnings and other important
information.
®
The device must be mounted in a suitable and secure location
on your motorcycle, based on available power sources and safe
cable routing.
NOTE: both 1/4 in. (65 mm) standard and M6 bolts are
included. Match the size of the factory bolts on your clutchclamp or brake-clamp bracket.
2 Thread the new bolts through the handlebar base, spacers
, and clutch-clamp or brake-clamp bracket.
3 Tighten the bolts to secure the base.
Attaching the Power Cables to the Motorcycle Mount
1 Thread the power cable connector through the top of the
opening in the motorcycle mount.
Motorcycle cradle
12 to 24 Vdc system power (red)
NOTE: the red system power cable may include an inline fuse on
some device models. Cables without an inline fuse are protected
internally.
System ground (black)
Installing the Handlebar Base
The device includes parts for two handlebar installation
solutions. Custom mounts may require additional hardware.
Installing the U-bolt and Handlebar Base
1 Place the U-bolt around the handlebar
ends through the handlebar base .
, and thread the
2 Slide the cable down to the bottom of the opening
the cable back until it is snug.
3 Screw the black screw into the back of the mount
hold the cable in place.
and pull
to
2 Tighten the nuts to secure the base.
NOTE: the recommended torque is 50 lbf-in (5.65 N-m). Do
not exceed torque of 80 lbf-in (9.04 N-m).
Installing the Handlebar Base to the Clutch-Clamp or BrakeClamp Brackets
1 Remove the two factory bolts on your clutch-clamp or brakeclamp bracket .
4 Thread the weather cap
into the hole.
Installation
through the top hole and press it
1
2 Push the right side of the device forward until it snaps into
place.
3 If the latch on the mount stays up after you insert the
device, press it down.
Attaching the Base Plate to the Motorcycle Mount
NOTICE
Direct, sustained contact with the base plate or any part of the
motorcycle may damage the mount over time. To prevent this
kind of damage, you must place the mounting spacers between
the mount and base plate, and make sure that no part of the
device or mount touches the motorcycle.
1 Thread the M4 x 20 mm panhead screws
washers
, cradle, spacers
through the
and base plate .
2
3
4
5
Insert each ball into the double-socket arm.
Tighten the knob slightly.
Adjust for optimal viewing and operation.
Tighten the knob to secure the mount.
Installing your device in the motorcycle mount
1 Fit the left side of your device into the cradle.
2
Mounting Your Device in an Automobile
WARNING
This product contains a lithium-ion battery. To prevent the
possibility of personal injury or product damage caused by
battery exposure to extreme heat, store the device out of direct
sunlight.
Do not use the suction cup mount on a motorcycle.
See the Important safety and product information guide in the
product box for product warnings and other important
information.
Attaching the Base Plate to the Handlebar Base
1 Align the ball of the handlebar base and the ball of the
with each end of the double-socket arm
1 Press the release button on the bottom of the mount.
2 Lift out the device.
NOTICE
Before mounting the device, check the local laws pertaining to
windscreen mounting.
2 Tighten the nuts to secure the base plate.
base plate
Removing Your Device from the Motorcycle
Mount
.
NOTE: the automobile mount is not included with all device
models. Go to garmin.com to purchase optional accessories.
1 Plug the automotive power cable into the port on the
mount.
2 Remove the clear plastic from the suction cup .
3 Clean and dry your windscreen and the suction cup with a
lint-free cloth.
4 Press the suction cup to the windscreen, and flip the lever
back toward the windscreen.
5 Snap the cradle onto the suction cup arm.
6 Fit one side of your device into the cradle.
7 Press the device into the cradle until it snaps into place.
Installation
8 Plug the other end of the automotive power cable into a
power outlet.
Getting started
WARNING
See the Important safety and product information guide in the
product box for product warnings and other important
information.
• Update the maps and software on your device (Product
updates, page 22).
• Mount the device and connect it to power.
• Pair your Bluetooth phone and headset (Pairing Your Phone
and Headset, page 14) (optional).
• Acquire GPS signals (Acquiring GPS signals, page 3).
• Adjust the screen brightness (Adjusting the screen
brightness, page 3).
• Navigate to your destination (Starting a route, page 5).
®
Device Overview
3 If necessary, go to an open area away from tall buildings and
trees.
in the status bar indicates the satellite signal strength. When
at least half of the bars are filled, the device is ready for
navigation.
Status bar icons
The status bar is located at the top of the main menu. The status
bar icons display information about features on the device. You
can select some icons to change settings or view additional
information.
GPS signal status. Hold to view GPS accuracy and acquired
satellite information (Viewing GPS signal status, page 25).
Bluetooth technology status. Select to view the Bluetooth
settings (Bluetooth settings, page 20).
Wi-Fi signal strength. Select to change the Wi-Fi settings
(Wi‑Fi settings, page 20).
®
Connected to hands-free calling. Select to place a phone call
(Hands-free calling, page 15).
Active transportation mode. Select to change the transportation
mode.
Current time. Select to set the time (Setting the Time,
page 21).
Battery charge level.
Sharing LiveTrack data. The number of invited viewers appears
on the icon. Select to open the LiveTrack app (LiveTrack,
page 18).
Smartphone Link status. Select to connect to the Smartphone
Link app and receive live traffic data and other live services
(Pairing with your phone and connecting to Smartphone Link,
page 13). When the icon is blue, the device is connected to
the Smartphone Link app.
Temperature. Select to view the weather forecast (Viewing the
weather forecast, page 19).
power key
microSD memory card slot
®
USB power and data port
Turning the device on or off
• To turn the device on, press the power key or connect the
device to power.
• To put the device in power saving mode, press the power key
while the device is on.
While in power saving mode, the screen is off and the device
uses very little power, but it can wake instantly for use.
TIP: you can charge your device faster by putting it in power
saving mode while charging the battery.
• To turn off the device completely, hold the power key until a
prompt appears on the screen, and select Off.
The prompt appears after five seconds. If you release the
power key before the prompt appears, the device enters
power saving mode.
Acquiring GPS signals
When you turn on your navigation device, the GPS receiver
must collect satellite data and establish the current location. The
time required to acquire satellite signals varies based on several
factors, including how far you are from the location where you
last used your navigation device, whether you have a clear view
of the sky, and how long it has been since you last used your
navigation device. The first time you turn on your navigation
device, it may take several minutes to acquire satellite signals.
1 Turn on the device.
2 Wait while the device locates satellites.
Fuel status. Select to view fuel tracking information (Fuel
tracking, page 8).
Using the on-screen buttons
On-screen buttons allow you to navigate the pages, menus and
menu options on your device.
• Select
to return to the previous menu screen.
• Hold
to quickly return to the main menu.
• Select or to scroll through lists or menus.
• Hold or to scroll faster.
• Select
to see a context-based menu of options for the
current screen.
Adjusting the volume
1 Select Volume.
2 Select an option:
• Use the slider bar to adjust the volume.
• Select to mute the device.
• Select for additional options.
Using the audio mixer
You can use the audio mixer to set the volume levels for
different audio types, such as navigation prompts or phone calls.
The level for each audio type is a percentage of the master
volume.
1 Select Volume.
2 Select > Audio Mixer.
3 Use the sliders to adjust the volume for each audio type.
Adjusting the screen brightness
1 Select Settings > Display > Brightness.
Getting started
3
2 Use the slider bar to adjust the brightness.
Rider Awareness Features and Alerts
NOTICE
The rider alerts and speed limit features are for information only
and do not replace your responsibility to abide by all posted
speed limit signs and to use safe driving judgement at all times.
Garmin is not responsible for any traffic fines or citations that
you receive for failing to follow all applicable traffic laws and
signs.
Your device provides features that can help encourage safer
riding and increase efficiency, even when you are riding in a
familiar area. The device plays an audible tone or message and
displays information for each alert. You can enable or disable
the audible tone or message for each type of alert. Not all alerts
are available in all areas.
School zone or nearby school: the device plays a tone and
displays the distance to and speed limit (if available) for an
upcoming school or school zone.
Speed limit reduction: the device plays a tone and displays the
upcoming reduced speed limit so you can be prepared to
reduce your speed.
Speed limit exceeded: the device plays a tone and displays a
red border on the speed limit icon when you exceed the
posted speed limit for the current road.
Level crossing: the device plays a tone and displays the
distance to an upcoming level crossing.
Animal crossing: the device plays a tone and displays the
distance to an upcoming animal crossing area.
Curve: the device plays a tone and displays the distance to a
curve in the road.
Slower traffic: the device plays a tone and displays the
distance to slower traffic when you approach slower traffic at
a higher speed. Your device must be receiving traffic
information to use this feature (Receiving Traffic Data Using
Smartphone Link, page 16).
Fatigue warning: the device plays a tone and suggests
upcoming rest stops after you have been driving for more
than two hours without stopping.
Enabling or Disabling Rider Alerts
You can turn off individual audible rider alerts. Visual alerts
appear even when the audible alert is disabled.
1 Select Settings > Driver Assistance > Audible Rider
Alerts.
2 Select or clear the tick box next to each alert.
Red light and speed cameras
NOTICE
Garmin is not responsible for the accuracy of or the
consequences of using a red light or speed camera database.
NOTE: this feature is not available for all regions or product
models.
Information about red light and speed camera locations is
available in some areas for some product models. The device
alerts you when you approach a reported speed or red light
camera.
• Live red light and safety camera data is available as a
subscription fromGarmin Live Services using the Smartphone
Link app (Garmin Live Services, page 13).
• To maintain an updated database of red light and speed
camera locations, your device must have an active
subscription to download and store safety camera data. Go to
4
garmin.com/speedcameras to check availability and
compatibility, or to purchase a subscription or one-time
update. You can purchase a new region or extend an existing
subscription at any time.
NOTE: in some regions, some product bundles include preloaded red light and speed camera data with free lifetime
updates.
• You can use the Garmin Express™ software (garmin.com
/express) to update the camera database stored on your
device. You should update your device frequently to receive
the most up-to-date camera information.
Incident Detection and Notifications
WARNING
The device allows you to send your location to an emergency
contact. This is a supplementary feature and should not be
relied upon as a primary method to obtain emergency
assistance. The Smartphone Link app does not contact
emergency services on your behalf.
Your zūmo device uses built-in sensors to detect a possible
vehicle incident.
• If you set up an incident contact, the device can send an
automated text message to that contact when it detects an
incident and your vehicle stops moving. This can help alert
the contact to your situation if you are not able to call or send
a message. This feature requires a connection to
Smartphone Link and an active mobile data connection to
send a message.
• If you have not set up an incident contact, the device
automatically displays the nearest address or geographic
coordinates when it detects an incident. This feature is
helpful if you need to tell emergency personnel your location.
You can select More to view the Where Am I? page.
Setting Up an Incident Contact
Before you can set up an incident detection contact, you must
complete these tasks:
• Connect your device to Smartphone Link (Pairing with your
phone and connecting to Smartphone Link, page 13).
• Select Settings > Bluetooth, select your phone's name and
check that the Phone calls option is enabled.
The device must have access to the Smartphone Link app and
to your smartphone phone book during the incident contact
setup. If you do not want to use your device for hands-free
calling, you can disable the Phone calls option after the incident
contact setup is complete.
1 Select Settings > Driver Assistance > Incident
Notification > Continue.
A list of your smartphone contacts appears.
2 Select a contact, and select Next.
3 Verify the contact's phone number, and select Next.
4 Enter your name or nickname, and select Done.
5 Review the sample incident message, and select Next.
6 Follow the on-screen instructions to inform your contact that
you have added them as an incident contact.
NOTE: the incident notification message includes the name
or nickname you entered, but it is not sent from your phone
number. The message is sent using a third-party service, and
you should inform your incident contact that the incident
message will come from an unknown number.
7 Select OK.
8 Review the information, and select Save.
Rider Awareness Features and Alerts
Cancelling an Incident Notification
When the device detects an incident, a message and a voice
prompt inform you that a notification will be sent to your incident
contact. A 60-second countdown timer starts when the incident
is detected, and the device sends the notification automatically
when the timer expires. If you do not want to send the
notification, you can cancel it.
Before the timer expires, select Cancel.
Disabling Incident Notifications
While incident notifications are disabled, the device does not
send an SMS notification when it detects an incident.
1 Select Settings > Driver Assistance > Incident
Notification.
2 Clear the Incident Detection SMS tick box.
Viewing Helmet Law Notifications
Helmet law and eye protection notifications may appear on your
zūmo device the first time your device acquires satellites and
when your device approaches a location with motorcycle safety
rules.
NOTICE
Garmin recommends that all riders wear helmets for safety.
Helmet law notifications are for reference only, are subject to
change and are not intended to be considered legal advice.
Helmet law notifications are available in the U.S. and Canada
only.
Select the notification to view more details.
Searching for Helmet Laws
You can search for helmet laws by state or province.
1 Select Apps > Helmet Guide.
2 Select a county or province.
Navigating to your destination
Routes
A route is a path from your current location to one or more
destinations.
• The device calculates a recommended route to your
destination based on the preferences you set, including the
route calculation mode (Changing the route calculation mode,
page 5) and avoidances (Avoiding Delays, Tolls and
Areas, page 7).
• You can start navigating to your destination quickly using the
recommended route, or you can select an alternative route
(Starting a route, page 5).
• If there are specific roads you need to use or avoid, you can
customise the route.
• You can add multiple destinations to a route.
Starting a route
1 Select Where To?, and search for a location.
2 Select a location.
3 Select an option:
• To start navigating using the recommended route, select
Go!.
• To choose an alternative route, select , and select a
route.
Alternative routes appear to the right of the map.
• To edit the course of the route, select > Edit Route, and
add shaping points to the route.
Navigating to your destination
The device calculates a route to the location and guides you
using voice prompts and information on the map (Your route on
the map, page 5). A preview of the major roads in your route
appears at the edge of the map for several seconds.
If you need to stop at additional destinations, you can add the
locations to your route.
Changing the route calculation mode
1 Select Settings > Navigation > Calculation Mode.
2 Select an option:
• Select Faster Time to calculate routes that are faster to
drive but can be longer in distance.
• Select Garmin Adventurous Routing™ to calculate
routes that prefer curvy roads.
• Select Off Road to calculate point-to-point routes (without
roads).
• Select Shorter Distance to calculate routes that are
shorter in distance but can take more time to drive.
Taking a Route Using Adventurous Routing
Your device can calculate routes that prefer bendy roads, hills
and fewer motorways. This feature can provide a more
enjoyable ride, but it may increase the time or distance to your
destination.
NOTE: this feature is not available on all device models or for all
map regions.
1 Select Settings > Navigation > Calculation Mode >
Garmin Adventurous Routing™ > Save.
2 Select Garmin Adventurous Routing™.
3 Use the Prefer Bends slider to include more or fewer curves.
4 Use the Prefer Hills slider to include more or fewer hills.
5 Use the Avoid Major Motorways slider to include more or
fewer motorways.
Start
a route (Starting a route, page 5).
6
Starting a route by using the map
You can start a route by selecting a location from the map.
1 Select View Map.
2 Drag and zoom the map to display the area to search.
3 If necessary, select to filter the displayed points of interest
by category.
Location markers ( or a blue dot) appear on the map.
4 Select an option:
• Select a location marker.
• Select a point, such as a street, junction or address
location.
5 Select Go!.
Going home
The first time you start a route home, the device prompts you to
enter your home location.
1 Select Where To? > Go Home.
2 If necessary, enter your home location.
Editing your home location
1 Select Where To? > > Set Home Location.
2 Enter your home location.
Your route on the map
As you travel, the device guides you to your destination using
voice prompts and information on the map. Instructions for your
next turn or exit, or other actions appear across the top of the
map.
5
• When you approach some destinations, the device
automatically prompts you to search for parking. You can
select Yes to find nearby parking areas (Parking Near Your
Destination, page 6).
• When you stop at your destination, the device automatically
ends the route. If the device does not detect your arrival
automatically, you can select Stop to end your route.
Parking Near Your Destination
Next action in the route. Indicates the next turn, exit, or other action
and the lane in which you should travel, if available.
Distance to the next action.
Name of the street or exit associated with the next action.
Route highlighted on the map.
Next action in the route. Arrows on the map indicate the location of
upcoming actions.
Vehicle speed.
Name of the road on which you are travelling.
Estimated arrival time.
TIP: you can touch this field to change the information it shows.
Active lane guidance
As you approach some turns, exits, or interchanges in your
route, a detailed simulation of the road appears beside the map,
if available. A coloured line
indicates the proper lane for the
turn.
Your device can help you find a parking spot near your
destination. When you approach some destinations, the device
automatically prompts you to search for parking.
1 Select an option:
• When the device prompts you, select Yes to search for
nearby parking.
• If the device does not prompt you, select Where To? >
Categories > Parking, and select > My Destination.
2 Select Filter Parking, and select one or more categories to
filter parking by availability, type, price, or payment methods
(optional).
NOTE: detailed parking data is not available in all areas or
for all parking locations.
3 Select a parking location, and select Go! > Add as Next
Stop.
The device guides you to the parking area.
Finding your last parking spot
When you disconnect the device from vehicle power while the
device is on, your current location is saved as a parking spot.
Select Apps > Last Spot.
Changing Your Active Route
Adding a location to your route
Viewing turns and directions
While navigating a route, you can view upcoming turns, lane
changes, or other directions for your route.
1 From the map, select an option:
• To view upcoming turns and directions as you navigate,
select > Turns.
The map tool displays the next four turns or directions
beside the map. The list updates automatically as you
navigate the route.
• To view the complete list of turns and directions for the
entire route, select the text bar at the top of the map.
2 Select a turn or direction (optional).
Detailed information appears. An image of the junction may
appear for junctions on major roads, if available.
Viewing the Entire Route on the Map
1 While navigating a route, select anywhere on the map.
2 Select .
Arriving at your destination
When you approach your destination, the device provides
information to help you complete your route.
•
indicates the location of your destination on the map, and a
voice prompt announces you are approaching your
destination.
6
Before you can add a location to your route, you must be
navigating a route (Starting a route, page 5).
You can add locations to the middle or end of your route. For
example, you can add a petrol station as the next destination in
your route.
TIP: to create complex routes with multiple destinations or
scheduled stops, you can use the trip planner to plan, schedule,
and save a trip (Planning a trip, page 17).
1 From the map, select > Where To?.
2 Search for a location.
3 Select a location.
4 Select Go!.
5 Select an option:
• To add the location as the next destination in your route,
select Add as Next Stop.
• To add the location to the end of your route, select Add as
Last Stop.
• To add the location and edit the order of destinations in
your route, select Add to Active Route.
The device re-calculates the route to include the added location
and guides you to the destinations in order.
Shaping your route
Before you can shape your route, you must start a route
(Starting a route, page 5).
You can manually shape your route to change its course. This
allows you to direct the route to use a certain road or go through
a certain area without adding a destination to the route.
1 Touch anywhere on the map.
2 Select .
The device enters route shaping mode.
Navigating to your destination
3 Select a location on the map.
TIP: you can select to zoom in on the map and select a
more precise location.
The device recalculates the route to travel through the
selected location.
4 If necessary, select an option:
• To add more shaping points to the route, select additional
locations on the map.
• To remove a shaping point, select .
5 When you are finished shaping the route, select Go!.
Taking a Detour
You can take a detour for a specified distance along your route
or detour around specific roads. This is useful if you encounter
construction zones, closed roads or poor road conditions.
1 From the map, select > Change Route.
TIP: if the Change Route tool is not in the map tools menu,
you can add it (Enabling map tools, page 12).
2 Select an option:
• To re-route for a specific distance, select Detour by
Distance.
• To detour around a specific road on the route, select
Detour by Road.
• To find a new route, select Detour.
Stopping the route
From the map, select
> Stop.
Using Suggested Routes
Before you can use this feature, you must save at least one
location and enable the travel history feature (Device and
privacy settings, page 21).
Using the myTrends™ feature, your device predicts your
destination based on your travel history, the day of the week and
the time of day. After you have driven to a favourite location
several times, the location may appear in the navigation bar on
the map, along with the estimated time of travel and traffic
information.
Select the navigation bar to view a suggested route to the
location.
Avoiding Delays, Tolls and Areas
Avoiding traffic delays on your route
Before you can avoid traffic delays, you must be receiving traffic
information (Receiving Traffic Data Using Smartphone Link,
page 16).
By default, the device optimises your route to avoid traffic delays
automatically. If you have disabled this option in the traffic
settings (Traffic Settings, page 21), you can view and avoid
traffic delays manually.
1 While navigating a route, select > Traffic.
2 Select Alternative Route, if available.
3 Select Go!.
Avoiding toll roads
Your device can avoid routing you through areas that require
tolls, such as toll roads, toll bridges, or congestion areas. The
device may still include a toll area in your route if no other
reasonable routes are available.
1 Select Settings > Navigation.
2 Select an option:
NOTE: the menu changes based on your area and the map
data on your device.
• Select Toll Roads.
Navigating to your destination
• Select Tolls and Fees > Toll Roads.
3 Select an option:
• To be asked each time before routing through a toll area,
select Always Ask.
• To always avoid tolls, select Avoid.
• To always allow tolls, select Allow.
4 Select Save.
Avoiding toll stickers
NOTE: this feature is not available in all areas.
The map data on your device may contain detailed toll sticker
information for some countries. You can avoid or allow toll
stickers for each country.
1 Select Settings > Navigation > Tolls and Fees > Toll
Stickers.
2 Select a country.
3 Select an option:
• To be asked each time before routing through a toll area,
select Always Ask.
• To always avoid tolls, select Avoid.
• To always allow tolls, select Allow.
4 Select Save.
Avoiding road features
1 Select Settings > Navigation > Avoidances.
2 Select the road features to avoid on your routes and select
Save.
Custom avoidances
Custom avoidances allow you select specific areas or sections
of road to avoid. When the device calculates a route, it avoids
these areas and roads unless no other reasonable route is
available.
Avoiding a road
1 Select Settings > Navigation > Custom Avoidances.
2 Select Add Avoid Road.
3 Select the starting point of the section of road to avoid and
select Next.
4 Select the ending point of the road section and select Next.
5 Select Done.
Avoiding an area
1 Select Settings > Navigation > Custom Avoidances.
2 If necessary, select Add Avoidance.
3 Select Add Avoid Area.
4 Select the upper left corner of the area to avoid and select
Next.
5 Select the lower right corner of the area to avoid and select
Next.
The selected area is shaded on the map.
6 Select Done.
Disabling a custom avoidance
You can disable a custom avoidance without deleting it.
1 Select Settings > Navigation > Custom Avoidances.
2 Select a created avoidance.
3 Select > Disable.
Deleting custom avoidances
1 Select Settings > Navigation > Custom Avoidances.
2 Select an option:
• To delete all custom avoidances, select
.
7
• To delete one custom avoidance, select the avoidance
> Delete.
and select
Navigating off road
If you are not following roadways as you navigate, you can use
Off Road mode.
1 Select Settings > Navigation.
2 Select Calculation Mode > Off Road > Save.
The next route will be calculated as a straight line to the
location.
Fuel tracking
You can set your device to estimate your fuel usage, warn you
when you approach the maximum estimated fuel distance, and
suggest fuel stops based on your estimated fuel range. When
fuel tracking is enabled, indicates the current fuel status.
White: fuel tracking is disabled, or the device is not connected
to the motorcycle mount.
Green: the estimated fuel range is above the fuel tank warning
level.
Orange: the estimated fuel range is below the fuel tank warning
level.
Red: the estimated distance remaining on the tank is 0.
Enabling fuel tracking
Before you can enable fuel tracking, the device must be in
motorcycle mode or off road mode and placed in the motorcycle
mount.
When you enable fuel tracking, a fuel gauge appears on the trip
computer (Viewing the trip information page, page 12).
1 Fill your fuel tank.
2 Select Apps > Fuel Settings > Fuel Tracking.
3 Select Distance Per Tank.
4 Enter the distance the vehicle travels on a tank of fuel and
select Done.
Setting a low-fuel warning
You can set the device to warn you when the tank is low on fuel.
NOTE: the device must be connected to the motorcycle mount
to give low-fuel warnings.
1 Enable fuel tracking (Enabling fuel tracking, page 8).
2 Select Remaining Fuel Warning.
3 Enter a distance and select Done.
When you have only enough fuel left to travel the distance you
entered, a low-fuel warning appears on the map page.
Resetting the Fuel Tank Mileage
When you refill your fuel tank, you should reset the fuel tank
mileage on your device to more accurately track your remaining
fuel.
Select Apps > Fuel Settings > Reset Fuel Tank.
Enabling dynamic fuel stops
Before you can enable dynamic fuel stops, the device must be in
motorcycle mode, placed in the motorcycle mount and fuel
tracking must be enabled.
You can set the device to suggest fuel stops based on your
estimated fuel range.
Select Apps > Fuel Settings > Dynamic Fuel Stops.
Finding and saving locations
The maps loaded in your device contain locations, such as
restaurants, hotels, vehicle services, and detailed street
information. The Where To? menu helps you find your
8
destination by providing several methods to browse, search, and
save this information.
• Enter search terms to quickly search all location information
(Finding a location using the search bar, page 8).
• Browse or search pre-loaded points of interest by category
(Points of Interest, page 8).
• Search and check into Foursquare points of interest
(Searching Foursquare points of interest, page 10).
• Use search tools to find specific locations, such as
addresses, junctions, or geographic coordinates (Search
tools, page 10).
• Search near a different town or area (Changing the search
area, page 9).
• Save your favourite locations to find them quickly in the future
(Saving Locations, page 11).
• Return to recently found locations (Viewing history,
page 10).
®
Points of Interest
A point of interest is a place that you may find useful or
interesting. Points of interest are organised by category and can
include popular travel destinations such as petrol stations,
restaurants, hotels, and entertainment venues.
Finding a location using the search bar
You can use the search bar to search for locations by entering a
category, brand name, address or town name.
1 Select Where To?.
2 Select Enter Search in the search bar.
3 Enter all or part of the search term.
Suggested search terms appear below the search bar.
4 Select an option:
• To search for a type of business, enter a category name
(for example, "cinemas").
• To search for a business name, enter all or part of the
name.
• To search for an address near you, enter the house
number and street name.
• To search for an address in another town, enter the house
number, street name, town and county.
• To search for a town, enter the town and county.
• To search for coordinates, enter latitude and longitude
coordinates.
5 Select an option:
• To search using a suggested search term, select the term.
• To search using the text you entered, select .
6 If necessary, select a location.
Finding a location by category
1
2
3
4
Select Where To?.
Select a category or select Categories.
If necessary, select a subcategory.
Select a location.
Searching within a category
After you have performed a search for a point of interest, certain
categories may display a Quick Search list that shows the last
four destinations you selected.
1 Select Where To? > Categories.
2 Select a category.
Finding and saving locations
3 Select an option:
• Select a destination from the quick search list on the right
side of the screen.
The quick search list provides a list of recently found
locations in the selected category.
• Select a subcategory, if necessary, and select a
destination.
Location Search Results on the Map
You can view the results of a location search on the map instead
of in a list.
From the location search results, select . The nearest location
appears at the centre of the map, and basic information about
the selected location appears at the bottom of the map.
Navigating to points of interest within a venue
NOTE: this feature may not be available in all areas or for all
product models.
You can create a route to a point of interest (POI) within a larger
venue, such as a store in a shopping centre or a specific
terminal in an airport.
1 Select Where To? > Enter Search.
2 Select an option:
• To search for the venue, enter the name or address of the
venue, select , and go to step 3.
• To search for the POI, enter the name of the POI, select
, and go to step 5.
3 Select the venue.
A list of categories appears below the venue, such as
restaurants, car hire, or terminals.
4 Select a category.
5 Select the POI, and select Go!.
The device creates a route to the parking area or venue
entrance closest to the POI. When you arrive at the destination,
a chequered flag indicates the recommended parking area. A
labelled point indicates the location of the POI within the venue.
Exploring a venue
NOTE: this feature may not be available in all areas or for all
product models.
You can view a list of all points of interest located within each
venue.
1 Select a venue.
2 Select > Explore this Venue.
Location Search Results
By default, the location search results appear in a list, with the
nearest location at the top. You can scroll down to view more
results.
Drag the map to view additional search results.
Additional search results. Select to view another location.
Selected location summary. Select to view detailed information
about the selected location.
Go! Select to start navigating to the location using the
recommended route.
Select to view the search results in a list.
Changing the search area
By default, the device searches near your current location. You
can also search other areas, such as near your destination, near
another city, or along your active route.
1 Select Where To?.
2 Select .
3 Select an option.
Parking
Your zūmo device includes detailed parking data, which can
help you find nearby parking based on the likelihood of available
parking spots, type of parking area, price, or accepted payment
methods.
In some areas, live parking data is available while your zūmo
device is connected to Smartphone Link (Pairing with your
phone and connecting to Smartphone Link, page 13). While
your device is receiving live parking data, you can view real-time
parking trends.
NOTE: detailed parking data is not available in all areas or for all
parking locations. Garmin is not responsible for the accuracy or
timeliness of live parking data.
Finding Parking Near Your Current Location
1 Select Where To? > Categories > Parking.
2 Select Filter Parking, and select one or more categories to
Select a location to view the option menu.
Select to view detailed information about the selected location.
Select to find parking areas near the location.
Select to view alternate routes to the locations.
Go! Select to start navigating to the location using the
recommended route.
Select to view the search results on the map.
filter parking by availability, type, price, or payment methods
(optional).
NOTE: detailed parking data is not available in all areas or
for all parking locations.
3 Select a parking location.
4 Select Go!.
Finding Parking Near a Specified Location
1 Search for a location.
2 From the location search results, select a location.
3 Select .
A list of parking areas near the selected location appears.
Finding and saving locations
9
4 Select Filter Parking, and select one or more categories to
filter parking by availability, type, price, or payment methods
(optional).
NOTE: detailed parking data is not available in all areas or
for all parking locations.
5 Select a parking location.
6 Select Go!.
Understanding Parking Colours and Symbols
Parking locations that include detailed parking data are colourcoded to show the likelihood of finding parking. Symbols indicate
the type of parking available (street or car park), relative pricing
information and payment type.
You can view the legend for these colours and symbols on the
device.
From the parking search results, select .
Search tools
Search tools allow you to search for specific types of locations
by responding to on-screen prompts.
Finding an address
NOTE: the order of the steps may change depending on the
map data loaded on your device.
1 Select Where To?.
2 If necessary, select Searching near: to change the search
area (Changing the search area, page 9).
3 Select Address.
4 Follow the on-screen instructions to enter address
information.
5 Select the address.
Finding a junction
You can search for a junction between two streets, motorways,
or other roads.
1 Select Where To? > Categories > Junctions.
2 Follow the on-screen instructions to enter street information.
3 Select the junction.
Finding a town
1 Select Where To? > Categories > Towns.
2 Select an option:
• Select a town from the list of nearby town.
• To search near another location, select Searching near:
(Changing the search area, page 9).
• To search for a town by name, select Enter Search, enter
a town name, and select .
Finding a location using coordinates
You can find a location using latitude and longitude coordinates.
This can be helpful when geocaching.
1 Select Where To? > Categories > Coordinates.
2 If necessary, select , and change the coordinate format or
datum.
3 Enter the latitude and longitude coordinates.
4 Select View on Map.
Foursquare
Foursquare is a location-based social network. Your device
includes pre-loaded Foursquare points of interest, which are
indicated by the Foursquare logo in your location search results.
For additional features, you can connect to your Foursquare
account using Smartphone Link on your compatible smartphone.
When you connect to your Foursquare account using
Smartphone Link, you can view Foursquare location details,
10
check in to a location, and search for points of interest in the
online Foursquare database.
Connecting to your Foursquare account
1 Connect your device to Smartphone Link (Pairing with your
phone and connecting to Smartphone Link, page 13).
2 On your smartphone, open the Smartphone Link app.
3 Open the Smartphone Link app settings, and select
Foursquare® > Login.
4 Enter your Foursquare login information.
Searching Foursquare points of interest
You can search for Foursquare points of interest loaded on your
device. When you connect to your Foursquare account using
Smartphone Link, the search provides the most up-to-date
results from the online Foursquare database and customised
results from your Foursquare user account.
Select Where To? > Categories > Foursquare®.
Viewing Foursquare location details
Before you can view Foursquare location details, you must
connect to a supported phone running Smartphone Link and log
in to your Foursquare account.
You can view detailed Foursquare location information, such as
user ratings, restaurant pricing information, and hours of
operation.
1 From the location search results, select a Foursquare point of
interest.
2 Select .
Checking in with Foursquare
Before you can check in with Foursquare, you must connect to a
supported phone running Smartphone Link and log in to your
Foursquare account.
1 Select Apps > Foursquare® > Check In.
2 Select a point of interest.
3 Select > Check In.
TripAdvisor
®
Your device includes TripAdvisor points of interest and ratings.
TripAdvisor ratings appear automatically in the search results list
for applicable points of interest. You can also search for nearby
TripAdvisor points of interest and sort by distance or popularity.
Finding TripAdvisor points of interest
1 Select Where To? > Categories > TripAdvisor.
2 Select a category.
A list of nearbyTripAdvisor points of interest for the category
appears.
3 Select Sort Results to sort the search results by distance or
popularity (optional).
Viewing history
Your device stores a history of the last 50 locations you have
found.
Select Where To? > History.
Clearing the list of recently found places
Select Where To? > History >
> Clear > Yes.
Viewing current location information
You can use the Where Am I? page to view information about
your current location. This feature is helpful if you need to tell
emergency personnel your location.
From the map, select the vehicle.
Finding and saving locations
Finding emergency services and fuel
You can use the Where Am I? page to find the nearest
hospitals, police stations, and fuel stations.
1 From the map, select the vehicle.
2 Select Hospitals, Police Station, or Petrol Stations.
A list of locations for the selected service appears, with the
nearest locations at the top.
3 Select a location.
4 Select an option:
• To navigate to the location, select Go!
• To view the phone number and other location details,
select .
Getting directions to your current location
If you need to tell another person how to get to your current
location, your device can give you a list of directions.
1 From the map, select the vehicle.
2 Select > Directions to Me.
3 Select a starting location.
4 Select Select.
Adding a shortcut
You can add shortcuts to the Where To? menu. A shortcut can
point to a location, a category, or a search tool.
The Where To? menu can contain up to 36 shortcut icons.
1 Select Where To? > Personalise.
2 Select an item.
Removing a shortcut
1 Select Where To? > > Remove Shortcut(s).
2 Select a shortcut to remove.
3 Select the shortcut again to confirm.
4 Select Save.
Saving Locations
Saving a location
1 Search for a location (Finding a location by category,
2
3
4
5
page 8).
From the search results, select a location.
Select .
Select
> Save.
If necessary, enter a name, and select Done.
Saving your current location
1 From the map, select the vehicle icon.
2 Select Save.
3 Enter a name and select Done.
4 Select OK.
Editing a favourite location
1 Select Where To? > Favourites.
2 If necessary, select a category.
3 Select a location.
4 Select .
5 Select > Edit.
6 Select an option:
• Select Name.
• Select Phone Number.
• Select Categories to assign categories to the saved
location.
Using the Map
• Select Change Map Symbol to change the symbol used
to mark the saved location on a map.
7 Edit the information.
8 Select Done.
Assigning categories to a saved location
You can add custom categories to organise your saved
locations.
NOTE: categories appear in the saved locations menu after you
have saved more than 12 locations.
1 Select Where To? > Favourites.
2 Select a location.
3 Select .
4 Select > Edit > Categories.
5 Enter one or more category names, separate by commas.
6 If necessary, select a suggested category.
7 Select Done.
Deleting a favourite location
NOTE: deleted locations cannot be recovered.
1 Select Where To? > Favourites.
2 Select > Delete Favourite(s).
3 Select the box next to the saved locations to delete and
select Delete.
Using the Map
You can use the map to navigate a route (Your route on the
map, page 5) or to view a map of your surroundings when no
route is active.
1 Select View Map.
2 Touch anywhere on the map.
3 Select an option:
• Drag the map to pan left, right, up, or down.
• To zoom in or out, select or .
• To switch between North Up and 3-D views, select .
• To filter the displayed points of interest by category, select
.
• To start a route, select a location on the map, and select
Go! (Starting a route by using the map, page 5).
Map Tools
Map tools provide quick access to information and device
functions while you view the map. When you activate a map
tool, it appears in a panel at the edge of the map.
Stop: stops navigation of the active route.
Change Route: allows you to re-route or skip locations in your
route.
Up Ahead: displays upcoming locations along the route, or the
road on which you are travelling (Up ahead, page 12).
Turns: displays a list of upcoming turns in your route (Viewing
turns and directions, page 6).
Trip Data: displays customisable trip data, such as speed or
mileage (Viewing trip data from the map, page 12).
Volume: adjusts the master audio volume.
Brightness: adjusts the screen brightness.
Phone: displays a list of recent phone calls from your connected
phone, and displays in-call options while a phone call is
active (Using in-call options, page 15).
LiveTrack: allows you to start and stop LiveTrack sharing
(LiveTrack, page 18).
11
Traffic: displays traffic conditions along your route or in your
area (Viewing upcoming traffic, page 12).
Weather: displays weather conditions for your area.
photoLive: displays live traffic cameras from your photoLive
subscription (photoLive traffic cameras, page 19).
Report Camera: allows you to report a speed or red light
camera. This tool is available only when you have speed or
red-light camera data on your device and you have an active
connection to the Smartphone Link app (Pairing with your
phone and connecting to Smartphone Link, page 13).
Viewing a map tool
1 From the map, select
2 Select a map tool.
.
The map tool appears in a panel at the edge of the map.
When
you have finished using the map tool, select .
3
Enabling map tools
By default, only the most commonly used map tools are enabled
in the map tools menu. You can add up to 12 tools to the menu.
1 From the map, select > .
2 Select the tick box next to each tool to add.
3 Select Save.
Up ahead
The Up Ahead tool provides information about upcoming
locations along your route or the road on which you are
travelling. You can view upcoming points of interest, such as
restaurants, petrol stations, or roadside service. When travelling
on a motorway, you can also view information and available
services for upcoming exits and cities, similar to the information
on motorway road signs.
You can customise three categories to show in the Up Ahead
tool.
Viewing upcoming locations
1 From the map, select > Up Ahead.
2 Select an option:
• To view the next upcoming location in each category,
select , if necessary.
• To view information and available services for upcoming
motorway exits or cities, select .
NOTE: this option is available only while you are travelling
on a motorway, or when your route includes a motorway.
3 Select an item to view a list of locations for that category,
exit, or city.
Customising the up ahead categories
You can change the location categories that appear in the Up
Ahead tool.
1 From the map, select > Up Ahead.
2 Select a category.
3 Select .
4 Select an option:
• To move a category up or down in the list, select and drag
the arrow next to the category name.
• To change a category, select the category.
• To create a custom category, select a category, select
Custom Search, and enter the name of a business or
category.
5 Select Done.
12
Trip information
Viewing trip data from the map
Before you can view trip data on the map, you must add the tool
to the map tools menu (Enabling map tools, page 12).
From the map, select > Trip Data.
Customising the trip data fields
Before you can customise the data that appears in the trip data
map tool, you must add the trip data tool to the map tools menu
(Enabling map tools, page 12).
1 From the map, select > Trip Data.
2 Select a trip data field.
3 Select an option.
The new trip data field appears in the trip data map tool.
Viewing the trip information page
The trip information page displays your speed and provides
statistics about your trip.
NOTE: if you make frequent stops, leave the device turned on,
so it can accurately measure elapsed time during the trip.
From the map, select Speed.
Viewing the trip log
Your device keeps a trip log, which is a record of the path you
have travelled.
1 Select Settings > Map & Vehicle > Map Layers.
2 Select the Trip Log tick box.
Resetting trip information
1 From the map, select Speed.
2 Select > Reset Field(s).
3 Select an option:
• When not navigating a route, select Select All to reset
every data field on the first page except the speedometer.
• Select Reset Trip Data to reset the information on the trip
computer.
• Select Reset Max. Speed to reset the maximum speed.
• Select Reset Trip B to reset the odometer.
Viewing upcoming traffic
You can view traffic incidents coming up along your route or
along the road on which you are travelling.
1 While navigating a route, select > Traffic.
The nearest upcoming traffic incident appears in a panel on
the right side of the map.
2 Select the traffic incident to view additional details.
Viewing traffic on the map
The traffic map shows colour-coded traffic flow and delays on
nearby roads.
1 From the main menu, select Apps > Traffic.
2 If necessary, select > Legend to view the legend for the
traffic map.
Searching for traffic incidents
1 From the main menu, select Apps > Traffic.
2 Select > Incidents.
3 Select an item in the list.
4 If there is more than one incident, use the arrows to view
additional incidents.
Using the Map
Customising the map
Customising the map layers
You can customise which data appears on the map, such as
icons for points of interest and road conditions.
1 Select Settings > Map & Vehicle > Map Layers.
2 Select the layers to include on the map, and select Save.
Changing the map data field
1 From the map, select a data field.
NOTE: you cannot customise Speed.
2 Select a type of data to display.
Changing the map perspective
1 Select Settings > Map & Vehicle > Driving Map View.
2 Select an option:
• Select Track Up to display the map in two dimensions (2D), with your direction of travel at the top.
• Select North Up to display the map in 2-D with north at
the top.
• Select 3-D to display the map in three dimensions.
3 Select Save.
Live services, traffic and smartphone
features
To get the most from your zūmo device, you should pair the
device with your smartphone and connect to the Smartphone
Link app. The Smartphone Link app allows your device to
receive live data, including live traffic data, parking trends, red
light and speed cameras and other live services.
Live traffic data: sends real-time traffic data to your device,
such as traffic incidents and delays, construction zones and
road closings (Traffic, page 16).
Live parking information: sends real-time parking trends to
your device, where available (Parking, page 9).
Garmin Live Services: provides free and paid services to send
live data to your device, such as red light and speed cameras
or traffic cameras (Garmin Live Services, page 13).
Weather information: sends real-time weather conditions and
alerts to your device (Viewing the weather forecast,
page 19).
LiveTrack: allows you to share your trip with selected contacts
in real time (LiveTrack, page 18).
Smart Notifications: displays phone notifications and
messages on your device. This feature is not available for all
languages.
Hands-Free calling: allows you to make and receive phone
calls using your device, and allows you to use the device as a
hands-free speaker phone.
Send locations to device: allows you to send locations from
your smartphone to your navigation device.
Foursquare check in: allows you to check into Foursquare
locations using your navigation device (Checking in with
Foursquare, page 10).
Pairing with your phone and connecting to
Smartphone Link
You must pair your zūmo device with your phone and connect to
Smartphone Link to use some features, such as live traffic and
parking information, hands-free calling and other connected
features.
After the devices are paired, they connect automatically when
they are turned on and within range.
Live services, traffic and smartphone features
1 From the app store on your phone, install the Smartphone
Link app.
2 Place the zūmo device and your phone within 3 m (10 ft) of
each other.
3 On the zūmo device, select Settings > Bluetooth, and select
the Bluetooth check box.
4 Select Search for Devices.
5 On your phone, enable Bluetooth wireless technology, and
set the phone to be visible.
See your phone owner's manual for more information.
6 On the zūmo device, select OK.
The zūmo device begins searching for nearby Bluetooth
devices, and a list of Bluetooth devices appears. It may take
up to a minute for your phone to appear in the list.
7 Select your phone from the list, and select OK.
8 On your phone, confirm the pairing request.
9 On your phone, open the Smartphone Link app.
If you are pairing with an Apple device, a security code
appears on the zūmo screen.
10 If necessary, enter the security code on your phone within 30
seconds.
®
Bluetooth Feature status icons
Status icons appear in the Bluetooth settings next to each paired
device.
Select Settings > Bluetooth.
• A grey icon indicates the feature is disabled or disconnected
for that device.
• A coloured icon indicates the feature is connected and active
for that device.
Hands-free calling
Smart notifications
Smartphone Link features and services
Media streaming
Headset is connected
Garmin Live Services
Before you can use Garmin Live Services, your device must be
connected to Smartphone Link (Pairing with your phone and
connecting to Smartphone Link, page 13).
Garmin Live Services provides free and subscription-based
plans that send live data to your device, such as traffic
conditions, weather and red light and speed cameras.
Some services, such as weather, are available as separate apps
on your device. Other services, such as traffic, enhance the
existing navigation features on your device. Features that
require access to Garmin Live Services display the Smartphone
Link symbol and appear only when the device is connected to
Smartphone Link.
Subscribing to Garmin Live Services
Some zūmo Live Services require a paid subscription. In the
Smartphone Link app, you can purchase a lifetime subscription
as an in-app purchase. The subscription is tied to the app store
account for your smartphone.
1 On your smartphone, open the Smartphone Link app.
2 Select My Account.
A list of available services and subscription prices appears.
3 Select a service.
4 Select the price.
5 Select Subscribe.
6 Follow the on-screen instructions to complete the purchase.
13
Pairing Your Phone and Headset
You must pair your zūmo device with your phone and Bluetooth
headset to use several Bluetooth features. After the devices are
paired, they connect automatically when they are turned on and
within range.
Some features require the Smartphone Link app. You can
connect to the Smartphone Link app during the pairing process
or later.
1 On your phone, enable Bluetooth wireless technology, and
set the phone to be visible.
See your phone owner's manual for more information.
Place
the zūmo device and your phone within 3 m (10 ft) of
2
each other.
3 On the zūmo device, select Settings > Bluetooth > .
4 Follow the on-screen instructions to pair your phone with your
device.
5 On the zūmo device, select .
TIP: if the initial Bluetooth settings screen does not appear,
you can select Settings > Bluetooth > Search for Devices
to pair your headset.
6 Follow the on-screen instructions to pair your headset with
your device.
7 From the app store on your phone, install and open the
Smartphone Link app (optional).
If you are pairing with an Apple device, a security code
appears on the zūmo screen.
8 If necessary, enter the security code on your phone within 30
seconds.
Sending a Location from Your Smartphone
to Your Device
You can search for a location using the Smartphone Link app on
your phone and send it to your zūmo device.
1 On your smartphone, open the Smartphone Link app.
2 Select an option:
• To find a nearby location, select Find Nearby Places, and
enter all or part of an address or the name of a place.
• To find a nearby Foursquare point of interest, select
Foursquare, and select a point of interest from the list.
• To choose a location on the map, select Pick location,
and touch the location on the map.
• To find an address from your contact list, select Contacts,
and select a contact name.
The selected location appears on the map.
3 Select Send.
The Smartphone Link app sends the location to your zūmo.
4 On your zūmo device, select an option:
• To start navigating to the location, select Go!.
• To view details about the location, or to save the location
to your favourites, select .
• To accept the location without starting navigation, select
OK.
The location appears in the recently found locations on your
zūmo device.
Smart notifications
While your device is connected to the Smartphone Link app, you
can view notifications from your smartphone on your zūmo
device, such as text messages, incoming calls, and calendar
appointments.
NOTE: you may need to wait a few minutes to receive
notifications on your navigation device after it connects to the
14
Smartphone Link app. appears coloured in the Bluetooth
settings when smart notifications are connected and active
(Bluetooth Feature status icons, page 13).
Receiving notifications
WARNING
Do not read or reply to notifications while driving.
Before your zūmo device can receive notifications, you must
connect it to your smartphone and to the Smartphone Link app.
From most pages, a pop-up appears when the device receives a
notification from your smartphone. If the device is moving, you
must verify you are a passenger and not the driver before you
can view notifications.
NOTE: if you are viewing the map, notifications appear in a map
tool.
• To ignore a notification, select OK.
The pop-up closes, but the notification remains active on your
phone.
• To view a notification, select View.
• To listen to the notification, select View > Play.
The device reads the notification using text-to-speech
technology. This feature is not available for all languages.
• To perform additional actions, such as dismissing the
notification from your phone, select View, and select an
option.
NOTE: additional actions are available for only some
notification types and must be supported by the app
generating the notification.
Receiving notifications while viewing the map
WARNING
Do not read or reply to notifications while driving.
Before your zūmo device can receive notifications, you must
connect it to your smartphone and to the Smartphone Link app.
When you are viewing the map, new notifications appear in a
map tool at the edge of the screen. If the device is moving, you
must verify you are a passenger and not the driver before you
can view notifications.
• To ignore a notification, select , or wait for popup to expire.
The pop-up closes, but the notification remains active on your
phone.
• To view a notification, select the notification text.
• To listen to the notification, select Play Message.
The device reads the notification using text-to-speech
technology. This feature is not available for all languages.
• To perform additional actions, such as dismissing the
notification from your phone, select View, and select an
option.
NOTE: additional actions are available for only some
notification types and must be supported by the app
generating the notification.
Viewing the list of notifications
You can view a list of all active notifications.
1 Select Apps > Smart Notifications.
The list of notifications appears. Unread notifications appear
black, and previously read notifications appear grey.
2 Select an option:
• To view a notification, select the notification description.
• To listen to a notification, select .
The device reads the notification using text-to-speech
technology. This feature is not available for all languages.
Live services, traffic and smartphone features
Hands-free calling
NOTE: while most phones and headsets are supported and can
be used, it cannot be guaranteed that a particular phone or
headset can be used. All features may not be available for your
phone.
Using Bluetooth wireless technology, your device can connect to
your mobile phone and wireless headset or helmet to become a
hands-free device. To determine whether your mobile device
with Bluetooth technology is compatible with your device, go to
www.garmin.com/bluetooth.
Placing a call
Dialling a number
1 Select Apps > Phone > Dial.
2 Enter the number.
3 Select Dial.
Calling a contact in your phone book
Your phone book is loaded from your phone to the device each
time your phone and the device connect. It may take a few
minutes for the phone book to be available. Some phones do
not support this feature.
1 Select Apps > Phone > Phone Book.
2 Select a contact.
3 Select Call.
Calling a location
1 Select Apps > Phone > Browse Categories.
2 Select a point of interest.
3 Select Call.
Receiving a call
When you receive a call, select Answer or Ignore.
Using the call history
Your call history is loaded from your phone to the device each
time your phone and the device connect. It may take a few
minutes for the call history to be available. Some phones do not
support this feature.
1 Select Apps > Phone > Call History.
2 Select a category.
A list of calls appears, with the most recent calls at the top.
3 Select a call.
Using in-call options
While on a call, you can select in-call options from the map.
• To transfer audio to your phone, select .
TIP: you can use this feature if you want to turn off your
device and remain on the call or if you need privacy.
• To use the dial pad, select .
TIP: you can use this feature to use automated systems,
such as voice mail.
• To mute the microphone, select .
• To hang up, select .
Saving a home phone number
TIP: after you save a home number, you can edit the home
number by editing “Home” in your list of favourite locations
(Editing a favourite location, page 11).
1 Select Apps > Phone > > Set Home Number.
2 Enter your phone number.
3 Select Done.
Select Apps > Phone > Call Home.
Setting up Bluetooth features for your Apple
device
By default, all compatible Bluetooth features are enabled when
you pair your phone. You can enable, disable, or customise
certain features.
Connecting to the Smartphone Link app on your
Apple device
Before you can connect to the Smartphone Link app, you must
pair and connect your zūmo device with your phone.
If you did not connect to the Smartphone Link app during the
pairing process, you can connect to it for additional Bluetooth
features. The Smartphone Link app communicates with your
phone using Bluetooth Smart technology. The first time you
connect to the Smartphone Link app on an Apple device, you
must enter a Bluetooth Smart security code.
1 From the app store on your phone, install the Smartphone
Link app.
NOTE: you may need to update to the latest version of your
phone's operating system.
2 On your phone, open the Smartphone Link app.
A security code appears on the zūmo device screen.
3 On your phone, enter the code.
Disabling hands-free calling for your Apple device
You can disable hands-free calling and remain connected to
your phone for Smartphone Link data and notifications.
1 Select Settings > Bluetooth.
2 Select the phone name used for hands-free calling.
TIP: your phone may connect to hands-free calling and data
using two different names. appears coloured next to the
phone name used for hands-free calling.
3 Clear the Phone calls tick box.
Disabling Smartphone Link data and smart
notifications for your Apple device
You can disable Smartphone Link data and smart notifications
and remain connected to your phone for hands-free calling.
1 Select Settings > Bluetooth.
2 Select the phone name connected to Smartphone Link data
and notifications.
TIP: your phone may connect to hands-free calling and data
using two different names. and appear blue next to the
phone name used for data and notifications.
Clear
the Smartphone services check box.
3
Showing or hiding notification categories for your Apple
device
You can filter the notifications shown on your device by showing
or hiding categories.
1 Select Settings > Bluetooth.
2 Select the phone name connected to Smartphone Link data
and notifications.
TIP: your phone may connect to hands-free calling and data
using two different names. and appear coloured next to
the phone name used for data and notifications.
3 Select Smart Notifications.
4 Select the check box next to each notification to show.
Calling home
Before you can call home, you must enter a phone number for
your home location.
Live services, traffic and smartphone features
15
Setting up Bluetooth features for your
smartphone with Android™
By default, all compatible Bluetooth features are enabled when
you pair your phone. You can enable, disable, or customise
certain features.
Connecting to the Smartphone Link app on your
Android smartphone
Before you can connect to the Smartphone Link app, you must
pair and connect your zūmo device with your phone.
If you did not connect to the Smartphone Link app during the
pairing process, you can connect to it for additional Bluetooth
features.
1 From the app store on your phone, install the Smartphone
Link app.
2 On your phone, open the Smartphone Link app.
Disabling Bluetooth features for your smartphone
with Android
You can disable specific Bluetooth features and remain
connected to other features.
1 Select Settings > Bluetooth.
2 Select the phone name.
3 Select an option:
• To disable hands-free calling, clear the Phone calls check
box.
• To disable Smartphone Link data and smart notifications,
clear the Smartphone Link check box.
• To disable specific app notifications, use the settings in
the Smartphone Link app.
Showing or hiding notifications for your smartphone with
Android
You can use the Smartphone Link app to select which types of
notifications appear on your zūmo device.
1 On your phone, open the Smartphone Link app.
2 Select .
3 Verify the Smart Notifications check box is selected.
4 From the Notifications section, select Settings.
A list of notification categories and apps appears.
5 Select an option:
• To enable or disable a notification, select the toggle switch
next to the category or app name.
• To add an app to the list, select .
Disconnecting a Bluetooth device
You can temporarily disconnect a Bluetooth device without
deleting it from the paired devices list. The Bluetooth device can
connect to your zūmo device automatically in the future.
1 Select Settings > Bluetooth.
2 Select the device to disconnect.
3 Clear the tick box next to the name of your paired device.
Deleting a paired phone
You can delete a paired phone to prevent it from automatically
connecting to your device in the future.
1 Select Settings > Bluetooth.
2 Select the phone, and select Unpair device.
16
Traffic
NOTICE
Garmin is not responsible for the accuracy or timeliness of the
traffic information.
Your device can provide information about traffic on the road
ahead or on your route. You can set your device to avoid traffic
when calculating routes, and to find a new route to your
destination if a large traffic delay occurs on your active route
(Traffic Settings, page 21). The traffic map allows you to
browse the map for traffic delays in your area.
To provide traffic information, your device must be receiving
traffic data.
• Your device receives free traffic data through the
Smartphone Link app (Receiving Traffic Data Using
Smartphone Link, page 16).
• All product models can receive traffic data using an over-theair traffic receiver cable accessory (Receiving traffic data
using a traffic receiver, page 16). Go to your product page
at garmin.com to find and purchase a compatible traffic
receiver cable accessory.
Traffic data is not available in all areas. For information about
traffic coverage areas, go to www.garmin.com/traffic.
Receiving Traffic Data Using Smartphone
Link
Your device can receive free traffic data through the
Smartphone Link app.
1 Connect your device to Smartphone Link (Pairing with your
phone and connecting to Smartphone Link, page 13).
2 On your zūmo device, select Settings > Traffic, and verify
the Traffic tick box is selected.
Receiving traffic data using a traffic receiver
NOTICE
Heated (metallised) windscreens could degrade the
performance of the traffic receiver.
A traffic receiver receives traffic data from an over-the-air
broadcast signal, where available. An over-the-air traffic receiver
cable is available as an accessory for all product models. Go to
your product page at garmin.com to find and purchase a
compatible traffic receiver cable accessory. Traffic data is not
available in all areas.
Connect the device to vehicle power using the traffic receiver
cable (Mounting Your Device in an Automobile, page 2).
When you are within a traffic coverage area, your device can
display traffic information and help you avoid traffic delays.
Traffic Receiver Subscriptions
A regional traffic data subscription is included with most traffic
receivers. You can add subscriptions for additional regions to
your traffic receiver. For more information, go to garmin.com
/traffic.
Viewing traffic subscriptions
Select Settings > Traffic > Subscriptions.
Adding a subscription
You can purchase traffic subscriptions for other regions or
countries.
1 From the main menu, select Traffic.
2 Select Subscriptions > .
3 Write down the FM traffic receiver unit ID.
4 Go to www.garmin.com/fmtraffic to purchase a subscription
and get a 25-character code.
Traffic
The traffic subscription code cannot be reused. You must
obtain a new code each time you renew your service. If you
own multiple FM traffic receivers, you must obtain a new
code for each receiver.
5 Select Next on the device.
6 Enter the code.
7 Select Done.
Enabling traffic
You can enable or disable traffic data.
1 Select Settings > Traffic.
2 Select the Traffic tick box.
Viewing traffic on the map
The traffic map shows colour-coded traffic flow and delays on
nearby roads.
1 From the main menu, select Apps > Traffic.
2 If necessary, select > Legend to view the legend for the
traffic map.
Searching for traffic incidents
1 From the main menu, select Apps > Traffic.
2 Select > Incidents.
3 Select an item in the list.
4 If there is more than one incident, use the arrows to view
additional incidents.
Using the apps
Viewing the Owner's Manual on Your Device
You can view the complete owner's manual on the device
screen in many languages.
1 Select Apps > Owner's Manual.
The owner's manual appears in the same language as the
software text.
2 Select to search the owner's manual (optional).
Trip planner
You can use the trip planner to create and save a trip, which you
can navigate later. This can be useful for planning a delivery
route, a vacation, or a road trip. You can edit a saved trip to
further customise it, including reordering locations, optimising
the order of stops, adding suggested attractions and adding
shaping points.
You can also use the trip planner to edit and save your active
route.
Planning a trip
A trip can include many locations, and it must include at least a
starting point and a destination. The starting point is the location
from which you plan to start your trip. If you start navigating the
trip from a different location, the device gives you the option to
route to your starting point first. For a round trip, the starting
location and final destination can be the same.
1 Select Apps > Trip Planner > New Trip.
2 Select Select Start Location.
3 Choose a location for your starting point, and select Select.
4 Select Select Destination.
5 Choose a location for a destination, and select Select.
6 Select Add Location to add more locations (optional).
7 After you have added all the necessary locations, select Next
> Save.
Using the apps
8 Enter a name and select Done.
Editing and reordering locations in a trip
1 Select Apps > Trip Planner > Saved Trips.
2 Select a saved trip.
3 Select a location.
4 Select an option:
• To move the location up or down, select , and drag the
location to a new position in the trip.
• To add a new location after the selected location, select
.
• To remove the location, select .
Optimising the order of stops in a trip
The device can automatically optimise the order of stops in your
trip to create a shorter, more efficient route. The starting location
and final destination are not changed when you optimise the
order.
While editing a trip, select > Optimise Order.
Discovering Attractions Along Your Trip
The device can suggest interesting or popular attractions to add
to your trip.
1 While editing a trip, select > Suggest Attractions.
2 Select an attraction to view more information.
3 Select Select to add the attraction to your trip.
Changing routing options for a trip
You can customise how the device calculates the route when
you start your trip.
1 Select Apps > Trip Planner > Saved Trips.
2 Select a saved trip.
3 Select the vehicle profile icon, and select the vehicle you plan
to use while navigating the trip (optional).
4 Select .
5 Select an option:
• To add shaping points to your trip, select Shape Route,
and follow the on-screen instructions.
• To change the calculation mode for the trip, select Route
Preference (Changing the route calculation mode,
page 5).
Navigating to a favourite trip
1 Select Apps > Trip Planner > Saved Trips.
2 Select a saved trip.
3 Select Go!.
4 Select the first location to navigate to, and select Start.
The device calculates a route from your current location to
the selected location, and then it guides you to the remaining
trip destinations in order.
Editing and saving your active route
If a route is active, you can use the trip planner to edit and save
your route as a trip.
1 Select Apps > Trip Planner > My Active Route.
2 Edit your route using any of the trip planner features.
The route recalculates each time you make a change.
3 Select Save to save your route as a trip, which you can
navigate again later (optional).
Sharing a Route
You can share routes with other zūmo devices.
1 Select Apps > Share Route.
17
2 Select an option:
• To share a route using Smartphone Link, select
Smartphone Link.
• To share a route using a Bluetooth connection, select
Bluetooth.
• To copy the route to a microSD card, select Memory
Card.
Select
a route.
3
4 Select Done.
5 Follow the on-screen instructions on your zūmo device to
complete the sharing process.
LiveTrack
NOTICE
Use caution when sharing your location information with others.
The LiveTrack feature lets you share your trip with contacts from
your smartphone and your social networking accounts, such as
Facebook and Twitter. While you are sharing, viewers can track
your current location, recently visited locations, and the path of
your recent travels in real time.
This feature requires a smartphone running the Smartphone
Link app.
Setting Up LiveTrack Sharing and Inviting Viewers
The first time you use the LiveTrack feature, you must set up the
feature and invite viewers.
1 Connect to Smartphone Link (Pairing Your Phone and
Headset, page 14).
2 On your smartphone, open the Smartphone Link app, and
select LiveTrack.
3 Enter a user name, and select Next.
4 Enter one or more contacts to invite.
You can enter either the contact name or email address.
5 Select Start LiveTrack.
The app starts sharing your LiveTrack data. Invited viewers
receive an email with a link to view your LiveTrack data.
6 Select to share the LiveTrack link using a social network,
messaging app, or other sharing app (optional).
Starting LiveTrack Sharing
NOTICE
Use caution when sharing your location information with others.
Before you can start sharing, you must set up the LiveTrack
feature (Setting Up LiveTrack Sharing and Inviting Viewers,
page 18).
You can start sharing your LiveTrack data using your zūmo
device or the Smartphone Link app.
• On your zūmo device, select Apps > LiveTrack > Start
LiveTrack.
• On your smartphone, open the Smartphone Link app, and
select LiveTrack > Start LiveTrack.
A link to view your LiveTrack data is posted to your enabled
social network accounts, and an email with the link is sent to
your invited contacts. While you are sharing, viewers can click
the link to track your current location, recently visited locations
and the path of your recent travels in real time.
appears in the zūmo status bar while LiveTrack sharing is
active. The number of invited viewers also appears.
TIP: by default, the LiveTrack sharing session ends
automatically after 24 hours. In the Smartphone Link app, you
can select LiveTrack > Extend LiveTrack to extend the
18
duration of the LiveTrack sharing session, or you can stop
sharing at any time.
Stopping LiveTrack Sharing
You can stop LiveTrack sharing at any time using your zūmo
device or the Smartphone Link app.
• On your zūmo device, select Apps > LiveTrack > Stop
LiveTrack.
• On your smartphone, open the Smartphone Link app, and
select LiveTrack > Stop LiveTrack.
Viewers receive a message that the LiveTrack session has
ended, and they can no longer track your location.
Tracks
A track is a recording of your path. The track log contains
information about the recorded path, including time, location,
and elevation information.
Viewing and saving track information
1 Select Apps > Tracks > Active.
2 Select an option:
• To view all track segments, select All Segments.
• To view a specific track segment, select a segment.
The track is displayed on the map.
3 Select .
4 Select an option:
• To save the track, select Save Track.
• To save the track as a trip, select Save as Trip.
• To view an elevation plot of the track, select Elevation
Profile.
Media player
The media player can play music or audio from these sources.
• Music files stored on your zūmo device.
• Bluetooth audio from a paired phone.
• Pandora Internet radio.
®
Adding the Media Player Tool to the Map
The media player map tool enables you to control the media
player from your map.
1 Select Settings > Map & Vehicle > Map Tools > Media
Player.
2 Open the map.
3 Select > Media Player.
The media player controls appear on the map.
Changing the Media Source
You can change the source from which media is played on your
device.
1 Select Apps > Media Player > .
2 Select a media source.
Pandora Service
Pandora is free personalised radio that offers effortless and
endless music enjoyment and discovery. Pandora integration
requires a compatible mobile device with the Pandora
application installed. For more information on compatible mobile
devices visit www.pandora.com/everywhere/mobile.
NOTE: Pandora is currently available in the United States,
Australia and New Zealand.
Downloading the Pandora Application
Before you can use the Pandora service on your device, you
must download and install the Pandora app to your smartphone.
1 On your compatible smartphone, open the application store
and search for Pandora.
Using the apps
2 Install the Pandora app.
See the owner's manual for your smartphone or mobile media
device for more information.
Using Pandora
Before you can use the Pandora service, you must pair your
compatible smartphone with your device (Pairing Your Phone
and Headset, page 14).
1 On your device, select Apps > Pandora®.
2 Connect your compatible smartphone to your device.
3 Launch the Pandora application on your smartphone.
4 On your zūmo device, select an option:
• To play a song, select .
• To pause a song, select .
• To skip a song, select .
• If you like a song, select to hear more songs like it.
• If you dislike a song, select to prevent it from being
played in the future.
Changing Stations
1 Select Apps > Pandora®.
2 Select .
3 Select a station.
Using the compass
NOTE: you must be moving for the compass to determine your
direction.
You can navigate using a GPS compass.
Select Apps > Compass.
TracBack
®
Following your recent track
The TracBack feature records the most recent segment of your
movement. You can retrace your recent track back to a previous
location.
1 Select Apps > TracBack.
Your recent track appears on the map.
2 Select Go!.
Saving your recent track as a trip
You can save your recent track as a trip, which you can navigate
later using the trip planner (Navigating to a favourite trip,
page 17).
1 Select TracBack.
Your recent track appears on the map.
2 Select > Save as Trip.
3 Enter a name and select Done.
Viewing the weather forecast
Before you can use this feature, your device must be receiving
weather data. You can connect your device to the Smartphone
Link app to receive weather data (Pairing with your phone and
connecting to Smartphone Link, page 13).
1 Select Apps > Weather.
The device shows the current weather conditions and a
forecast for the next several days.
2 Select a day.
The detailed forecast for that day appears.
Viewing weather near a different town
1 Select Apps > Weather > Current Location.
2 Select an option:
Using the apps
• To view weather for a favourite town, select a town in the
list.
• To add a favourite town, select Add Town, and enter a
town name.
Viewing the weather radar
Before you can use this feature, you must purchase Advanced
Weather service using Smartphone Link.
You can view an animated, colour-coded radar map of current
weather conditions, as well as a weather icon on the map. The
weather icon changes to show weather in the vicinity, such as
rain, snow and thunderstorms.
1 Select Apps > Weather.
2 If necessary, select a town.
3 Select > Weather Radar.
Viewing weather alerts
Before you can use this feature, you must purchase the
Advanced Weather service using Smartphone Link.
NOTE: this feature is not available in all areas.
While you are travelling with your device, weather alerts may
appear on the map. You can also view a map of weather alerts
near your current location or near a selected town.
1 Select Apps > Weather.
2 If necessary, select a town.
3 Select > Weather Alerts.
Checking road conditions
Before you can use this feature, you must purchase Advanced
Weather service using Smartphone Link.
1 Select Apps > Weather.
2 If necessary, select a city.
3 Select > Road Conditions.
Creating a Round-Trip Route
The device can create a round-trip route using a specified
starting location and a distance, duration or destination.
1 From the home screen, select Apps > Round Trip.
2 Select Start Location.
3 Select a location, and select Select.
4 Select Trip Attributes.
5 Select an option:
• Select Choose a Distance to plan your route by distance.
• Select Choose a Duration to plan your route based on
time.
• Select Choose a Destination to plan your route based on
a specified location.
6 Enter a distance, duration or destination.
7 Select an option:
• If you entered a distance or duration, select Done >
Calculate.
• If you selected a destination, select Select.
8 Select a route, and select Go!.
photoLive traffic cameras
Before you can use this feature, you must be connected to
Smartphone Link, and you must have a subscription to the
photoLive service (Subscribing to Garmin Live Services,
page 13).
photoLive traffic cameras provide live images of traffic
conditions on major roads and junctions.
The photoLive service is not available in all areas.
19
Viewing and Saving photoLive Traffic Cameras
You can view live images from nearby traffic cameras. You can
also save traffic cameras for areas you travel frequently.
1 Select Apps > photoLive.
2 Select Touch to Add
3 Select a road.
4 Select a traffic camera location.
A preview of the live image from the camera appears next to
a map of the camera's location. You can select the image
preview to view the full-sized image.
5 Select Save to save the camera (optional).
A thumbnail image preview of the camera is added to the
main screen of the photoLive app.
Viewing photoLive Traffic Cameras on the Map
The photoLive map tool shows traffic cameras from the road
ahead of you.
1 From the map, select > photoLive.
The device shows the live image from the nearest traffic
camera on the road ahead, along with the distance to the
camera. When you pass the camera, the device loads the
live image of the next camera on the road.
2 If no cameras are found for the road, select Find Cameras to
view or save nearby traffic cameras (optional).
Saving a traffic camera
1 Select Apps > photoLive.
2 Select Touch to Add.
3 Select a road.
4 Select a junction.
5 Select Save.
Viewing Previous Routes and Destinations
Before you can use this feature, you must enable the travel
history feature (Device and privacy settings, page 21).
You can view your previous routes and places where you have
stopped on the map.
Select Apps > Where I've Been.
zūmo settings
Map and vehicle settings
Select Settings > Map & Vehicle.
Vehicle: sets the vehicle icon that represents your position on
the map.
Driving Map View: sets the perspective on the map.
Map Detail: sets the level of detail on the map. More detail may
cause the map to be drawn more slowly.
Map Theme: changes the colour of the map data.
Map Tools: sets the shortcuts that appear in the map tools
menu.
Map Layers: sets the data that appears on the map page
(Customising the map layers, page 13).
Auto Zoom: automatically selects the zoom level for optimal use
of your map. When disabled, you must zoom in or out
manually.
Skip Next Stop Confirmation: sets a confirmation message to
appear when skipping a location on your route.
myMaps: sets which installed maps the device uses.
Enabling maps
You can enable map products installed on your device.
20
TIP: to purchase additional map products, go to
http://buy.garmin.com.
1 Select Settings > Map & Vehicle > myMaps.
2 Select a map.
Navigation settings
Select Settings > Navigation.
Route Preview: shows a preview of the major roads in your
route when you start navigation.
Calculation Mode: sets the route calculation method.
Garmin Adventurous Routing™: sets route preferences for
navigating curvy roads, hills and motorways.
Off-Route Recalculation: sets recalculation preferences when
navigating away from an active route.
Avoidances: sets road features to avoid on a route.
Custom Avoidances: allows you to avoid specific roads or
areas.
Toll Roads: sets preferences for avoiding toll roads.
Tolls and Fees: sets preferences for avoiding toll roads and toll
stickers.
NOTE: this feature is not available in all areas.
Restricted Mode: disables all functions that require significant
operator attention.
GPS Simulator: stops the device from receiving a GPS signal
and saves battery power.
Calculation Mode Settings
Select Settings > Navigation > Calculation Mode.
The route calculation is based on road speeds and vehicle
acceleration data for a given route.
Faster Time: calculates routes that are faster to drive but can
be longer in distance.
Shorter Distance: calculates routes that are shorter in distance
but can take more time to drive.
Off Road: calculates a direct line from your location to your
destination.
Garmin Adventurous Routing™: calculates routes that prefer
curvy roads.
NOTE: this feature is not available in all areas.
Setting a simulated location
If you are indoors or not receiving satellite signals, you can use
the GPS simulator to plan routes from a simulated location.
1 Select Settings > Navigation > GPS Simulator.
2 From the main menu, select View Map.
3 Tap the map twice to select an area.
The address of the location appears at the bottom of the
screen.
4 Select the location description.
5 Select Set Location.
Bluetooth settings
Select Settings > Bluetooth.
Bluetooth: enables Bluetooth wireless technology.
Search for Devices: searches for nearby Bluetooth devices.
Friendly Name: allows you to enter a friendly name that
identifies your device on other devices with Bluetooth
wireless technology.
Wi‑Fi settings
®
The wireless network settings allow you to manage Wi‑Fi
networks.
zūmo settings
Select Settings > Wi-Fi.
Wi-Fi: enables the Wi‑Fi radio.
Saved Networks: allows you to edit or remove saved networks.
Search for Networks: searches for nearby Wi‑Fi networks
(Connecting to a Wi‑Fi Network, page 22).
Driver Assistance Settings
Select Settings > Driver Assistance.
Audible Rider Alerts: enables an audible alert for each type of
driver alert (Rider Awareness Features and Alerts, page 4).
Speeding Alert: alerts you when you are exceeding the speed
limit.
Fatigue Warning: alerts you when you have been driving for a
long period without a break.
Automatic Incident Detection: enables the device to detect a
possible vehicle incident.
Incident Notification: allows you to set up a contact to be
notified when the device detects a possible vehicle incident.
Proximity Alerts: alerts you when you approach speed
cameras or red light cameras.
Display settings
Select Settings > Display.
Colour Mode: allows you to select day or night colour mode. If
you select the Auto option, the device automatically switches
to day or night colours based on the time of day.
Brightness: allows you to adjust the display brightness.
Display Timeout: allows you to set the amount of idle time
before your device enters sleep mode while using battery
power.
Screenshot: allows you to take a picture of the device screen.
Screenshots are saved in the Screenshot folder of the device
storage.
Language and Keyboard Settings
To open the Language and Keyboard settings, from the main
menu, select Settings > Language & Keyboard.
Voice Language: sets the language for voice prompts.
Text Language: sets all on-screen text to the selected
language.
NOTE: changing the text language does not change the
language of user-entered data or map data, such as street
names.
Keyboard Language: enables keyboard languages.
Device and privacy settings
Select Settings > Device.
About: displays the software version number, the unit ID
number and information on several other software features.
Regulatory: displays regulatory markings and information.
EULAs: displays the end-user licence agreements.
NOTE: you need this information when you update the
system software or purchase additional map data.
Device Data Reporting: shares anonymous data to improve the
device.
Travel History: allows the device to record information for the
myTrends Where I’ve Been and Trip Log features.
Clear Travel History: clears your travel history for the
myTrends Where I’ve Been and Trip Log features.
Restoring settings
You can restore a category of settings or all settings to the
factory default values.
1 Select Settings.
2 If necessary, select a settings category.
3 Select > Restore.
Traffic Settings
From the main menu, select Settings > Traffic.
Traffic: enables traffic.
Current Provider: sets the traffic provider to use for traffic data.
The Auto option selects the best available traffic data
automatically.
Subscriptions: lists the current traffic subscriptions.
Optimise Route: enables the device to use optimised
alternative routes automatically or upon request (Avoiding
traffic delays on your route, page 7).
Traffic Alerts: sets the traffic delay severity for which the device
displays a traffic alert.
Units and time settings
To open the Units and Time settings page, from the main menu,
select Settings > Units & Time.
Current Time: sets the device time.
Time Format: allows you to select a 12-hour, 24-hour or UTC
display time.
Units: sets the unit of measure used for distances.
Position Format: sets the co-ordinate format and datum used
for geographical co-ordinates.
Setting the Time
1 From the main menu, select the time.
2 Select an option:
• To set the time automatically using GPS information,
select Automatic.
• To set the time manually, drag the numbers up or down.
Device information
Device information
Viewing Regulatory and Compliance
Information
1 From the settings menu, swipe to the bottom of the menu.
2 Select Device > Regulatory.
Specifications
Water resistance
IEC 60529 IPX7*
Operating temperature range
From -20° to 55°C (from -4° to 131°F)
Charging temperature range
From 0° to 45°C (from 32° to 113°F)
Power input (vehicle power
cable, motorcycle or external
power)
From 12 to 24 Vdc
Battery type
Lithium-ion battery
Battery voltage range
From 3.5 to 4.1 V
Wireless frequencies/protocols
Wi‑Fi: 2.4 GHz @ 15 dBm nominal
Bluetooth: 2.4 GHz @ 9 dBm nominal
*The device withstands incidental exposure to water of up to 1 m
for up to 30 min. For more information, go to www.garmin.com
/waterrating.
Charging the Device
NOTE: this Class III product shall be powered by an LPS power
supply.
You can charge the battery in the device using any of these
methods.
21
• Connect the device to vehicle power.
• Connect the device to an optional power adapter accessory,
such as a wall power adapter.
You can purchase an approved Garmin AC-DC adapter
suitable for home or office use from a Garmin dealer or
www.garmin.com. The device may charge slowly when
connected to a third-party adapter.
Device maintenance
Garmin Support Centre
Go to support.garmin.com for help and information, such as
product manuals, frequently asked questions, videos and
customer support.
Map and Software Updates
For the best navigation experience, you should keep the maps
and software on your device up to date. Map updates ensure
your device has the latest available map data. Software updates
provide improvements to features and performance.
You can update your device using two methods.
• You can connect the device to a Wi‑Fi network to update
directly on the device (recommended). This option allows you
to update your device conveniently without connecting it to a
computer.
• You can connect the device to a computer and update it
using the Garmin Express application. This option allows you
to install map data onto a memory card if the updated maps
are too large to fit on the internal storage.
Connecting to a Wi‑Fi Network
• To install all available updates, select Install All.
• To install only map updates, select Map > Install All.
• To install only software updates, select Software > Install
All.
4 Read the licence agreements, and select Accept All to
accept the agreements.
NOTE: if you do not agree with the licence terms, you can
select Reject. This stops the update process. You cannot
install updates until you accept the licence agreements.
5 Using the included USB cable, connect the device to external
power and select Continue (Charging the Device, page 21).
For the best results, a USB wall charger that provides at least
1 A power output is recommended. Many USB power
adapters for smartphones, tablets, or portable media devices
may be compatible.
6 Keep the device connected to external power and within
range of the Wi‑Fi network until the update process is
complete.
TIP: if a map update is interrupted or cancelled before it
completes, your device may be missing map data. To repair
missing map data, you must update the maps again using either
Wi‑Fi or Garmin Express.
Product updates
On your computer, install Garmin Express (www.garmin.com
/express).
This provides easy access to these services for Garmin devices:
• Software updates
• Map updates
• Product registration
The first time you turn on the device, it prompts you to connect
to a Wi‑Fi network and register your device. You can also
connect to a Wi‑Fi network using the settings menu.
1 Select Settings > Wi-Fi.
2 If necessary, select Wi-Fi to enable Wi‑Fi technology.
3 Select Search for Networks.
The device displays a list of nearby Wi‑Fi networks.
4 Select a network.
5 If necessary, enter the password for the network, and select
Done.
The device connects to the network, and the network is added to
the list of saved networks. The device reconnects to this network
automatically when it is within range.
Updating Maps and Software with Garmin Express
You can use Garmin Express software to download and install
the latest map and software updates for your device. Garmin
Express is available for Windows and Mac computers.
1 On your computer, go to www.garmin.com/express.
Updating Maps and Software Using a Wi‑Fi Network
2 Select an option:
NOTICE
Map and software updates may require the device to download
large files. Regular data limits or charges from your Internet
service provider apply. Contact your Internet service provider for
more information about data limits or charges.
• To install on a Windows computer, select Download for
Windows.
• To install on a Mac computer, select Download for Mac.
3 Open the downloaded file, and follow the on-screen
instructions to complete the installation.
4 Start Garmin Express.
5 Connect your zūmo device to your computer using a USB
cable.
You can update the maps and software by connecting your
device to a Wi‑Fi network that provides access to the Internet.
This allows you to keep your device up to date without
connecting it to a computer.
1 Connect the device to a Wi‑Fi network (Connecting to a Wi‑Fi
Network, page 22).
While connected to a Wi‑Fi network, the device checks for
available updates. When an update is available, appears
on the Settings icon in the main menu.
2 Select Settings > Updates.
The device checks for available updates. When an update is
available, Update Available appears below Map or Software.
3 Select an option:
22
®
®
Device maintenance
3 If using a dampened cloth, turn off the device and disconnect
the device from the power.
4 Gently wipe the screen with the cloth.
Avoiding theft
6 When your zūmo device prompts you to enter file transfer
mode, select Yes.
7 On your computer, click Add a Device.
The Garmin Express software detects your device.
8 Click Add Device.
9 Follow the on-screen instructions to register your device and
add it to the Garmin Express software.
When setup is complete, the Garmin Express software
searches for map and software updates for your device.
10 Select an option:
• To install all available updates, click Install All.
• To install a single update, click View Details and select an
update.
NOTE: if a map update is too large for the internal storage of
the device, the software may prompt you to install a microSD
card in your device to add storage space (Installing a
memory card for maps and data, page 24).
• Remove the device and mount from sight when not in use.
• Remove the residue left on the windscreen by the suction
cup.
• Do not keep your unit in the glove compartment.
• Register your device using the Garmin Express software
(garmin.com/express).
Resetting the device
You can reset your device if it stops functioning.
Hold the power key for 12 seconds.
Removing the Device, Mount and Suction
Cup
Removing the Device from the Mount
1 Press the release tab or button on the mount.
2 Tilt the bottom of the device upward, and lift the device from
the mount.
Removing the Mount from the Suction Cup
1 Turn the device mount to the right or left.
2 Apply pressure until the socket on the mount releases the
ball on the suction cup.
Removing the Suction Cup from the Windscreen
1 Flip the lever on the suction cup towards you.
2 Pull the tab on the suction cup towards you.
Changing the Fuse in the Vehicle Power
Cable
NOTICE
When replacing the fuse, do not lose any of the small pieces
and make sure they are put back in the proper position. The
vehicle power cable does not work unless it is assembled
correctly.
The Garmin Express software downloads and installs the
updates onto your device. Map updates are very large, and this
process may take a long time on slower Internet connections.
If your device does not charge in your vehicle, you may need to
replace the fuse located at the tip of the vehicle adapter.
1 Rotate the end piece anti-clockwise to unlock it.
Device Care
NOTICE
Avoid dropping your device.
Do not store the device where prolonged exposure to extreme
temperatures can occur, as it can cause permanent damage.
Never use a hard or sharp object to operate the touchscreen as
this may result in damage.
Cleaning the outer casing
NOTICE
Avoid chemical cleaners and solvents that can damage plastic
components.
1 Clean the outer casing of the device (not the touchscreen)
using a cloth dampened with a mild detergent solution.
2 Wipe the device dry.
Cleaning the Touchscreen
1 Use a soft, clean, lint-free cloth.
2 If necessary, lightly dampen the cloth with water.
Troubleshooting
2
3
4
5
TIP: you may need to use a coin to remove the end piece.
Remove the end piece, the silver tip , and the fuse .
Insert a new fast-blow fuse that has the same current, such
as 1 A or 2 A.
Place the silver tip in the end piece.
Push in the end piece and rotate it clockwise to lock it back
into the vehicle power cable .
Troubleshooting
The suction cup will not stay on my
windscreen
1 Clean the suction cup and windscreen with surgical spirit.
2 Dry with a clean, dry cloth.
23
3 Mount the suction cup (Mounting Your Device in an
Automobile, page 2).
My device is not acquiring satellite signals
• Verify the GPS simulator is turned off (Navigation settings,
page 20).
• Take your device out of multi-storey car parks and away from
tall buildings and trees.
• Remain stationary for several minutes.
The device does not charge in my vehicle
• Check the fuse in the vehicle power cable (Changing the
Fuse in the Vehicle Power Cable, page 23).
• Verify that the vehicle is turned on and is supplying power to
the power outlet.
• Verify that the interior temperature of the vehicle is within the
charging temperature range indicated in the specifications.
• Verify that the fuse is not broken in the vehicle power socket.
My battery does not stay charged for very
long
•
•
•
•
Decrease the screen brightness (Display settings, page 21).
Shorten the display timeout (Display settings, page 21).
Decrease the volume (Adjusting the volume, page 3).
Turn off the wi-fi radio when it is not in use (Wi‑Fi settings,
page 20).
• Put the device in power saving mode when not in use
(Turning the device on or off, page 3).
• Keep your device away from extreme temperatures.
• Do not leave your device in direct sunlight.
®
My device does not connect to my phone or
Smartphone Link
• Select Settings > Bluetooth.
The Bluetooth option must be enabled.
• Enable Bluetooth wireless technology on your phone and
bring your phone within 10 m (33 ft.) of the device.
• On your smartphone, open the Smartphone Link app, and
select > to restart the Smartphone Link background
services.
• Verify your phone is compatible.
Go to www.garmin.com/bluetooth for more information.
• Complete the pairing process again.
To repeat the pairing process, you must unpair your phone
and device (Disconnecting a Bluetooth device, page 16), and
complete the pairing process (Pairing with your phone and
connecting to Smartphone Link, page 13).
My device does not appear as a removable
drive on my computer
On most computers, the device connects using Media Transfer
Protocol (MTP). In MTP mode, the device appears as a portable
device and not as a removable drive.
My device does not appear as a portable
device on my computer
On Mac computers and some Windows computers, the device
connects using USB mass storage mode. In USB mass storage
mode, the device appears as a removable drive or volume, and
not as a portable device. Windows versions prior to Windows XP
Service Pack 3 use USB mass storage mode.
24
My device does not appear as either a
portable device or a removable drive or
volume on my computer
1 Disconnect the USB cable from your computer.
2 Turn off the device.
3 Connect the USB cable to your device and to a USB port on
your computer.
TIP: the USB cable must connect to a USB port on your
computer, not to a USB hub.
The device turns on automatically and goes into MTP mode or
USB mass storage mode. A picture of the device connected to a
computer appears on the device screen.
NOTE: if you have several network drives mapped on your
computer, Windows may have trouble assigning drive letters to
your Garmin drives. For information about assigning drive
letters, see the help file for your operating system.
The Smartphone Link app affects the battery
charge level on my smartphone
The Smartphone Link app uses Bluetooth wireless technology to
send data to and receive data from your device. It is normal for
an active Bluetooth connection to consume some battery power.
The app also periodically checks for updates to available
services, which may consume additional battery power.
You can change the battery usage settings in the Smartphone
Link app to reduce the amount of battery power the app uses.
1 From the Smartphone Link app on your smartphone, select
.
2 Scroll to the Battery Usage section, and select Settings.
3 Select one or more options:
• Clear the Bluetooth Auto-Connect tick box.
Disabling this option may save a small amount of battery
power, but it prevents the app from connecting to your
zūmo device automatically. While this option is disabled,
you must select from the Smartphone Link main menu
each time you want to connect your device to Smartphone
Link.
• Clear the Live Services Check tick box.
On some smartphones, disabling this option may
significantly reduce the battery power used by the app.
While this option is disabled, you must manually refresh
the Smartphone Link main menu to receive updated
information about available live services.
Appendix
Installing a memory card for maps and data
You can install a memory card to increase the storage space for
maps and other data on your device. You can purchase memory
cards from an electronics supplier, or go to www.garmin.com
/maps to purchase a memory card with pre-loaded Garmin
mapping software. The device supports microSD memory cards
from 4 to 64 GB.
1 Locate the map and data memory card slot on your device
(Device Overview, page 3).
2 Pull up the weather cap from the microSD card slot.
3 Slide the microSD card slot cover towards the centre of the
device.
Appendix
Disconnecting the USB cable
If your device is connected to your computer as a removable
drive or volume, you must safely disconnect your device from
your computer to avoid data loss. If your device is connected to
your Windows computer as a portable device, it is not necessary
to safely disconnect.
1 Complete an action:
• For Windows computers, select the Safely Remove
Hardware icon in the system tray and select your device.
• For Mac computers, drag the volume icon to the rubbish
bin.
2 Disconnect the cable from your computer.
Viewing GPS signal status
Hold
4 Pull the microSD card slot cover up.
5 Insert a microSD card into the slot.
NOTE: confirm that the microSD card fits flush against the
card slot contacts.
6 Close the SD card cover.
7 Slide the SD card cover towards the outside edge of the
device until it clicks.
for three seconds.
Purchasing additional maps
1 Go to your device product page at garmin.com.
2 Click the Maps tab.
3 Follow the on-screen instructions.
Purchasing accessories
Go to garmin.com/accessories.
Data management
You can store files on your device. The device has a memory
card slot for additional data storage.
NOTE: the device is not compatible with Windows 95, 98, Me,
Windows NT and Mac OS 10.3 or earlier.
®
About Memory Cards
You can purchase memory cards from an electronics supplier,
or purchase pre-loaded Garmin mapping software
(www.garmin.com). In addition to map and data storage, the
memory card can be used to store files such as maps, images,
geocaches, routes, waypoints, and custom POIs.
Connecting the Device to Your Computer
You can connect the device to your computer using a USB
cable.
1 Plug the small end of the USB cable into the port on the
device.
2 Plug the larger end of the USB cable into a port on your
computer.
3 When your zūmo device prompts you to enter file transfer
mode, select Yes.
A picture of your device connected to a computer appears on
the device screen.
Depending on your computer operating system, the device
appears as either a portable device, a removable drive, or a
removable volume.
Transferring data from your computer
1 Connect the device to your computer (Connecting the Device
2
3
4
5
6
to Your Computer, page 25).
Depending on your computer operating system, the device
appears as either a portable device, a removable drive or a
removable volume.
On your computer, open the file browser.
Select a file.
Select Edit > Copy.
Browse to a folder on the device.
NOTE: for a removable drive or volume, you should not place
files in the Garmin folder.
Select Edit > Paste.
Appendix
25
Index
Symbols
2-D map view 13
3-D map view 13
A
accessories 25
active lane guidance 6
addresses, finding 10
alerts
audio 21
proximity points 21
answering calls 15
audio, proximity points 21
avoidances
area 7
deleting 7
disabling 7
road 7
road features 7
tolls 7
B
battery
charging 21, 24
maximising 24
problems 24
Bluetooth 20
Bluetooth technology 13, 15, 24
disconnecting a device 16
pairing a headset 14
pairing a phone 13, 14
Bluetooth Technology
disabling calls 15, 16
managing phones 15, 16
brightness 3
C
cables, motorcycle mount 1
calls 15
answering 15
contacts 15
dialling 15
history 15
home 15
placing 15
cameras
red light 4
speed 4
changing the search area 9
charging the device 24
charging your device 21
cleaning the device 23
cleaning the touchscreen 23
compass 19
computer, connecting 24, 25
connecting 22
coordinates 10
current location 10
D
deleting
paired Bluetooth device 16
trips 17
destinations 20. See locations
arriving 6
detours 7
device care 23
dialling 15
directions 6
disconnecting, Bluetooth device 16
display settings 21
driving directions 6
E
editing, favourite trips 17
emergency services 11
EULAs 21
26
F
favourite locations 17
categories 11
deleting 11
editing 11
files, transferring 25
finding locations. 8–10, 14 See also locations
addresses 10
categories 8
coordinates 10
junctions 10
towns 10
Foursquare 10
fuel
stations 11
tracking 8
fuse, changing 23
G
Garmin Connect 13
Garmin Express, updating software 22
Garmin Live Services 13
subscribing 13
geocaching 10
going home 5
GPS 3, 25
H
hands-free phone calls 13, 15, 16
Headset, pairing 14
helmet laws 5
history 10
home
calling 15
editing location 5
going 5
phone number 15
I
icons, status bar 3
ID number 21
incident contact 4
incident notification 4, 5
J
junctions, finding 10
K
keyboard
language 21
layout 21
L
language
keyboard 21
voice 21
latitude and longitude 10
LiveTrack 18
location 9
locations 10, 20
calling 15
current 10, 11
history 10
saving 11
searching for 8, 10
simulated 20
venues 9
low-fuel warning 8
M
map layers, customising 13
map view
2-D 13
3-D 13
maps 5, 11, 12, 20
data field 5, 12, 13
detail level 20
layers 13
purchasing 25
symbols 5
theme 20
tools 11, 12
updating 22
viewing routes 5, 6
media player 18
memory card 3, 25
installing 24
microSD card 3, 24
motorcycle mount 1
cables 1
mount, removing 23
mounting the device
automobile 2
motorcycle 1
removing from mount 2, 23
suction cup 23
myTrends, routes 7
N
navigation 5, 6, 9
off-road 8
settings 20
next turn 5
notifications 5, 13–16
O
off-road navigation 8
on-screen buttons 3
owner's manual 17
P
pairing
disconnecting 16
Headset 14
phone 13, 14, 24
parking 6, 9, 10
last spot 6
phone
disconnecting 16
pairing 13, 14, 24
phone book 15
phone calls 15
answering 15
dialling 15
muting 15
voice dial 15
photoLive 19, 20
points of interest (POI) 8, 10
Points of interest (POI) 9, 10
venues 9
power cables 21
changing the fuse 23
power key 3
product support 17
Q
Quick Search 8
R
red light cameras 4
removing mount 23
resetting
device 23
trip data 12
restoring settings 21
rider alerts 4
road conditions, weather 19
route summary 6
routes 5, 19
adding a point 6, 17
adventurous routing 5
calculating 5
calculation mode 5, 17, 20
myTrends 7
shaping 6
starting 5, 9
stopping 7
suggested 7
viewing on the map 5, 6
Index
S
satellite signals
acquiring 3
viewing 25
saving
current location 11
locations 18
screen, brightness 3
screenshots 21
search bar 8
settings 20, 21
shaping a route 6
sharing 17
LiveTrack 18
shortcuts
adding 11
deleting 11
simulated locations 20
sleep mode 3
Smartphone Link 13–16
connecting 13–16
disabling calls 15, 16
software
updating 22
version 21
specifications 21
speed cameras 4
subscriptions, Garmin Live Services 13
suction cup 23
T
theft, avoiding 23
time settings 21
tolls, avoiding 7
tools, maps 11, 12
TracBack 19
tracks 18
Tracks 18
traffic 12, 16, 17, 21
adding subscriptions 16
alternative route 7
cameras 19, 20
incidents 12, 17
map 12, 17
receiver 16
searching for delays 12, 17
traffic cameras, view 20
travel history 21
trip information 12
resetting 12
viewing 12
trip log, viewing 12
trip planner 17
editing a trip 17
shaping points 17
TripAdvisor 10
troubleshooting 23, 24
U
unit ID 21
up ahead 12
customising 12
updating
maps 22
software 22
USB, disconnecting 25
V
venues 9
volume, adjusting 3
W
weather 19
radar 19
road conditions 19
Where Am I? 10, 11
Wi‑Fi 20, 22
Y
your current location 11
Index
27
support.garmin.com
May 2019
190-02397-00_0B
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising