Garmin | G1000 NXi: Piper PA-44-180 Seminole | Garmin G1000 NXi: Piper PA-44-180 Seminole G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole

Garmin G1000 NXi: Piper PA-44-180 Seminole G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
®
Cockpit Reference Guide
Piper PA-44-180 Seminole
FLIGHT INSTRUMENTS
ENGINE INDICATION SYSTEM (EIS)
NAV/COM/TRANSPONDER/AUDIO PANEL
FLIGHT MANAGEMENT SYSTEM
HAZARD AVOIDANCE
AFCS
ADDITIONAL FEATURES
ABNORMAL OPERATIONS
ANNUNCIATIONS & ALERTS
APPENDIX
INDEX
Copyright © 2016, 2017 Garmin Ltd. or its subsidiaries. All rights reserved.
This manual reflects the operation of System Software version 2698.04 or later for the
PA-44-180. Some differences in operation may be observed when comparing the information
in this manual to earlier or later software versions.
Garmin International, Inc.
1200 East 151st Street
Olathe, Kansas 66062, U.S.A.
Tel: 913.397.8200
Fax: 913.397.8282
Aircraft On Ground (AOG) Hotline: 913.397.0836
Aviation Dealer Technical Support: 888.606.5482
Garmin AT, Inc.
2345 Turner Road SE
Salem, OR 97302, U.S.A.
Tel: 503.581.8101
Fax 503.364.2138
Garmin (Europe) Ltd.
Liberty House, Hounsdown Business Park
Southampton, Hampshire SO40 9LR U.K.
Tel: +44 (0) 238 052 4000
Fax: +44 (0) 238 052 4004
Aviation Support: +44 (0) 370 850 1243
Garmin Corporation
No. 68, Zhangshu 2nd Road
Xizhi District, New Taipei City, Taiwan
Tel: 34-93-357-2608
Fax: 34-93-429-4484
Website Address: www.garmin.com
Except as expressly provided herein, no part of this manual may be reproduced, copied,
transmitted, disseminated, downloaded or stored in any storage medium, for any purpose
without the express written permission of Garmin. Garmin hereby grants permission to
download a single copy of this manual and of any revision to this manual onto a hard drive or
other electronic storage medium to be viewed for personal use, provided that such electronic
or printed copy of this manual or revision must contain the complete text of this copyright
notice and provided further that any unauthorized commercial distribution of this manual or any
revision hereto is strictly prohibited.
Garmin®, G1000® NXi, FliteCharts®, and SafeTaxi® are registered trademarks of Garmin
International, Inc. or its subsidiaries. Garmin ESP™, Garmin SVT™, and Connext™ are trademarks
of Garmin International, Inc. or its subsidiaries. These trademarks may not be used without the
express permission of Garmin.
Skywatch® and Stormscope® are registered trademarks of L-3 Communications. Ryan®, TCAD®
and Avidyne® are registered trademarks of Avidyne Corporation. CO Guardian is a trademark of
CO Guardian, Inc. AC-U-KWIK® is a registered trademark of Penton Business Media Inc. Bendix/
King® and Honeywell® are registered trademarks of Honeywell International, Inc. Becker® is
a registered trademark of Becker Flugfunkwerk GmbH. NavData® is a registered trademark of
Jeppesen, Inc.; Wi-Fi® is a registered trademark of the Wi-Fi Alliance. Sirius XM Weather and
Sirius XM Satellite Radio are provided by Sirius XM Satellite Radio, Inc. The Bluetooth® word
mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is
under license.
AOPA Membership Publications, Inc. and its related organizations (hereinafter collectively
“AOPA”) expressly disclaim all warranties, with respect to the AOPA information included in this
data, express or implied, including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose. The information is provided “as is” and AOPA does not
warrant or make any representations regarding its accuracy, reliability, or otherwise. Under
no circumstances including negligence, shall AOPA be liable for any incidental, special or
consequential damages that result from the use or inability to use the software or related
documentation, even if AOPA or an AOPA authorized representative has been advised of the
possibility of such damages. User agrees not to sue AOPA and, to the maximum extent allowed
by law, to release and hold harmless AOPA from any causes of action, claims or losses related
to any actual or alleged inaccuracies in the information. Some jurisdictions do not allow the
limitation or exclusion of implied warranties or liability for incidental or consequential damages
so the above limitations or exclusions may not apply to you.
AC-U-KWIK and its related organizations (hereafter collectively “AC-U-KWIK Organizations”)
expressly disclaim all warranties with respect to the AC-U-KWIK information included in this
data, express or implied, including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose. The information is provided “as is” and AC-U-KWIK
Organizations do not warrant or make any representations regarding its accuracy, reliability, or
otherwise. Licensee agrees not to sue AC-U-KWIK Organizations and, to the maximum extent
allowed by law, to release and hold harmless AC-U-KWIK Organizations from any cause of
action, claims or losses related to any actual or alleged inaccuracies in the information arising
out of Garmin’s use of the information in the datasets. Some jurisdictions do not allow the
limitation or exclusion of implied warranties or liability for incidental or consequential damages
so the above limitations or exclusions may not apply to licensee.
Warnings, Cautions & Notes
WARNING: Do not use terrain avoidance displays as the sole source of
information for maintaining separation from terrain and obstacles. Garmin
obtains terrain and obstacle data from third party sources and cannot
independently verify the accuracy of the information.
WARNING: Always refer to current aeronautical charts and NOTAMs for
verification of displayed aeronautical information. Displayed aeronautical
data may not incorporate the latest NOTAM information.
WARNING: Do not use geometric altitude for compliance with air traffic
control altitude requirements. The primary barometric altimeter must be used
for compliance with all air traffic control altitude regulations, requirements,
instructions, and clearances.
WARNING: Do not use basemap information (land and water data) as the
sole means of navigation. Basemap data is intended only to supplement other
approved navigation data sources and should be considered only an aid to
enhance situational awareness.
WARNING: Do not rely solely upon the display of traffic information to
accurately depict all of the traffic within range of the aircraft. Due to lack
of equipment, poor signal reception, and/or inaccurate information from
aircraft or ground stations, traffic may be present that is not represented on
the display.
WARNING: Do not use data link weather information for maneuvering in,
near, or around areas of hazardous weather. Information contained within
data link weather products may not accurately depict current weather
conditions.
WARNING: Do not use TAWS information for primary terrain or obstacle
avoidance. TAWS is intended only to enhance situational awareness.
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Warnings, Cautions & Notes
WARNING: Do not use the indicated data link weather product age to
determine the age of the weather information shown by the data link weather
product. Due to time delays inherent in gathering and processing weather
data for data link transmission, the weather information shown by the data
link weather product may be older than the indicated weather product age.
WARNING: The displayed minimum safe altitude (MSAs) are only advisory
in nature and should not be relied upon as the sole source of obstacle and
terrain avoidance information. Always refer to current aeronautical charts for
appropriate minimum clearance altitudes.
WARNING: Always obtain qualified instruction prior to operational use of
this equipment.
WARNING: Do not use a QFE altimeter setting with this system. System
functions will not operate properly with a QFE altimeter setting. Use only
a QNH altimeter setting for height above mean sea level, or the standard
pressure setting, as applicable.
WARNING: Do not use GPS to navigate to any active waypoint identified as
a ‘NON WGS84 WPT’ by a system message. ‘NON WGS84 WPT’ waypoints
are derived from an unknown map reference datum that may be incompatible
with the map reference datum used by GPS (known as WGS84) and may be
positioned in error as displayed.
WARNING: When using the autopilot to fly an approach with vertical
guidance, the autopilot will not level the aircraft at the MDA/DH even if the
MDA/DH is set in the altitude preselect.
WARNING: Do not use the Garmin SVT runway depiction as the sole means
for determining the proximity of the aircraft to the runway or for maintaining
the proper approach path angle during landing.
WARNING: Intruder aircraft at or below 500 ft. AGL may not appear on the
Garmin SVT display or may appear as a partial symbol.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Warnings, Cautions & Notes
WARNING: Use appropriate primary systems for navigation, and for terrain,
obstacle, and traffic avoidance. Garmin SVT is intended as an aid to situational
awareness only and may not provide either the accuracy or reliability upon
which to solely base decisions and/or plan maneuvers to avoid terrain,
obstacles, or traffic.
WARNING: Because of variation in the earth’s magnetic field, do not rely on
the accuracy of attitude and heading indications in the following geographic
areas: North of 72° North latitude at all longitudes; South of 70° South
latitude at all longitudes; North of 65° North latitude between longitude
75° W and 120° W. (Northern Canada); North of 70° North latitude between
longitude 70° W and 128° W. (Northern Canada); North of 70° North latitude
between longitude 85° E and 114° E. (Northern Russia); South of 55° South
latitude between longitude 120° E and 165° E. (Region south of Australia
and New Zealand).
CAUTION: Do not clean display surfaces with abrasive cloths or cleaners
containing ammonia. They will harm the anti-reflective coating.
CAUTION: Repairs should only be made by an authorized Garmin service
center. Unauthorized repairs or modifications could void both the warranty
and affect the airworthiness of the aircraft.
NOTE: Do not rely solely upon data link services to provide Temporary Flight
Restriction (TFR) information. Always confirm TFR information through official
sources such as Flight Service Stations or Air Traffic Control.
NOTE: All visual depictions contained within this document, including screen
images of the system panel and displays, are subject to change and may
not reflect the most current system and aviation databases. Depictions of
equipment may differ slightly from the actual equipment.
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Warnings, Cautions & Notes
NOTE: The United States government operates the Global Positioning System
and is solely responsible for its accuracy and maintenance. The GPS system
is subject to changes which could affect the accuracy and performance of all
GPS equipment. Portions of the system utilize GPS as a precision electronic
NAVigation AID (NAVAID). Therefore, as with all NAVAIDs, information
presented by the system can be misused or misinterpreted and, therefore,
become unsafe.
NOTE: This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: Interference from GPS repeaters operating inside nearby hangars can
cause an intermittent loss of attitude and heading displays while the aircraft
is on the ground. Moving the aircraft more than 100 yards away from the
source of the interference should alleviate the condition.
NOTE: Use of polarized eyewear may cause the flight displays to appear dim
or blank.
NOTE: This product, its packaging, and its components contain chemicals
known to the State of California to cause cancer, birth defects, or reproductive
harm. This notice is being provided in accordance with California’s Proposition
65. If you have any questions or would like additional information, please
refer to our web site at www.garmin.com/prop65.
NOTE: Operating the system in the vicinity of metal buildings, metal structures,
or electromagnetic fields can cause sensor differences that may result in
nuisance miscompare annunciations during start up, shut down, or while
taxiing. If one or more of the sensed values are unavailable, the annunciation
indicates no comparison is possible.
NOTE: The system responds to a terminal procedure based on data coded
within that procedure in the Navigation Database. Differences in system
operation may be observed among similar types of procedures due to
differences in the Navigation Database coding specific to each procedure.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Warnings, Cautions & Notes
NOTE: The FAA has asked Garmin to remind pilots who fly with Garmin
database-dependent avionics of the following:
• It is the pilot’s responsibility to remain familiar with all FAA regulatory and
advisory guidance and information related to the use of databases in the
National Airspace System.
• Garmin equipment will only recognize and use databases that are obtained
from Garmin or Jeppesen. Databases obtained from Garmin or Jeppesen are
assured compliance with all data quality requirements (DQRs) by virtue of a
Type 2 Letter of Authorization (LOA) from the FAA. A copy of the Type 2 LOA
is available for each database and can be viewed at http://fly.garmin.com by
selecting ‘Type 2 LOA Status.’
• Use of a current Garmin or Jeppesen database in your Garmin equipment
is required for compliance with established FAA regulatory guidance, but
does not constitute authorization to fly any and all terminal procedures that
may be presented by the system. It is the pilot’s responsibility to operate in
accordance with established AFM(S) and regulatory guidance or limitations
as applicable to the pilot, the aircraft, and installed equipment.
NOTE: The pilot/operator must review and be familiar with Garmin’s database
exclusion list as discussed in SAIB CE-14-04 to determine what data may be
incomplete. The database exclusion list can be viewed at www.flygarmin.
com by selecting ‘Database Exclusions List.’
NOTE: The pilot/operator must have access to Garmin and Jeppesen database
alerts and consider their impact on the intended aircraft operation. The
database alerts can be viewed at www.flygarmin.com by selecting ‘Aviation
Database Alerts.’
NOTE: If the pilot/operator wants or needs to adjust the database, contact
Garmin Product Support to coordinate the revised DQRs.
NOTE: Garmin requests the flight crew report any observed discrepancies
related to database information. These discrepancies could come in the form
of an incorrect procedure; incorrectly identified terrain, obstacles and fixes; or
any other displayed item used for navigation or communication in the air or
on the ground. Go to FlyGarmin.com and select ‘Aviation Data Error Report’.
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Warnings, Cautions & Notes
NOTE: When using Stormscope, there are several atmospheric phenomena in
addition to nearby thunderstorms that can cause isolated discharge points in
the strike display mode. However, clusters of two or more discharge points
in the strike display mode do indicate thunderstorm activity if these points
reappear after the screen has been cleared.
NOTE: Operate G1000 NXi system power through at least one cycle in a
period of four days of continuous operation to avoid an autonomous system
reboot.
NOTE: The purpose of this Cockpit Reference Guide is to provide the pilot a
resource with which to find operating instructions on the major features of
the system more easily. It is not intended to be a comprehensive operating
guide. Complete operating procedures for the system are found in the Pilot’s
Guide for this aircraft.
NOTE: The system supports approval of AC 120-76C Hardware Class 3,
Software Type B Electronic Flight Bag (EFB) electronic aeronautical chart
applications. Possible additional requirements may make a secondary source
(traditional paper or additional electronic display) necessary onboard the
aircraft. If the secondary source is a Portable Electronic Device (PED), its use
must be consistent with guidance in AC 120-76C.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Record of Revisions
Part Number
190-02199-00
190-02199-01
Change Summary
Production release
Production release at GDU 20.10
Added support for Bluetooth® connection
Added support for HSI Map
Revision Date of Revision Affected Pages
A
May, 2017
All
190-02199-01 Rev. A
Description
Production release
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
RR-1
Record of Revisions
Blank Page
RR-2
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Table of Contents
FLIGHT INSTRUMENTS................................................................................................................. 1
Flight Instruments..................................................................................................................... 1
Supplemental Flight Data........................................................................................................ 4
PFD Annunciations and Alerting............................................................................................. 6
Garmin Synthetic Vision Technology (SVT).......................................................................... 6
ENGINE INDICATION..................................................................................................................... 9
Engine Display............................................................................................................................ 9
Engine Page.............................................................................................................................. 11
Fuel Calculations...................................................................................................................... 13
Carbon Monoxide Detector (Optional)............................................................................... 13
NAV/COM/TRANSPONDER/AUDIO PANEL........................................................................ 15
COM Operation......................................................................................................................... 15
NAV Operation.......................................................................................................................... 16
Transponder Controls.............................................................................................................. 17
Intercom..................................................................................................................................... 18
Passenger Address (PA) System............................................................................................ 19
Clearance Recorder and Player............................................................................................ 19
Audio Panel Preflight Procedure.......................................................................................... 19
FLIGHT MANAGEMENT.............................................................................................................. 21
Changing A Field In The MFD Navigation Data Bar.......................................................... 21
USING MAP DISPLAYS.............................................................................................................. 21
Changing The Navigation Map Orientation....................................................................... 21
Enabling/Disabling Auto North Up And Selecting The Minimum Switching Range.. 21
Configuring Automatic Zoom................................................................................................ 22
Panning The Map..................................................................................................................... 22
Reviewing Information For An Airport, NAVAID, Or User Waypoint............................ 22
Reviewing information for a special-use or controlled airspace................................. 23
Displaying/Removing Topographic Data On All MFD Pages Displaying Navigation
Maps........................................................................................................................................... 23
Displaying/Removing Topographic Data On The PFD Map............................................. 23
Displaying/Removing Topographic Data Using The Navigation Map Page Menu..... 24
Setting Up The ‘Land’, ‘Aviation’ Or ‘Airspace’ Group Items........................................... 24
Decluttering The Map............................................................................................................. 24
Decluttering The PFD Map..................................................................................................... 24
Displaying/Removing Airways.............................................................................................. 25
Selecting An Airway Range (Low ALT Airways or High ALT Airways)........................... 25
Setting Up Additional ‘Map’ Group Items.......................................................................... 25
WAYPOINTS................................................................................................................................. 26
Selecting An Airport For Review By Identifier, Facility Name, Or Location................ 26
Selecting A Runway................................................................................................................. 26
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
i
Table of Contents
Viewing A Destination Airport............................................................................................. 26
Viewing Information For A Nearest Airport On The PFD................................................ 26
Viewing Information For A Nearest Airport On The MFD............................................... 27
Viewing Runway Information For A Specific Airport...................................................... 27
Selecting An Intersection....................................................................................................... 27
Selecting An NDB..................................................................................................................... 27
Selecting A VOR........................................................................................................................ 28
Selecting A VRP........................................................................................................................ 28
Selecting A User Waypoint.................................................................................................... 28
Creating User Waypoints From The User Waypoint Information Page........................ 28
Creating User Waypoints From Map Pages........................................................................ 29
Deleting a single user waypoint.......................................................................................... 30
AIRSPACES................................................................................................................................... 30
Changing The Altitude Buffer Distance Setting................................................................ 30
Turning An Airspace Alert On Or Off................................................................................... 30
Selecting And Viewing An Airspace Alert With Its Associated Information............... 31
Turning Smart Airspace On Or Off....................................................................................... 31
DIRECT-TO NAVIGATION.......................................................................................................... 31
Entering A Waypoint Identifier, Facility Name, Or City As A Direct-To Destination. 31
Selecting An Active Flight Plan Waypoint As A Direct-To Destination........................ 32
Selecting A Nearest, Recent Or User Waypoint As A Direct-To Destination............... 32
Cancelling A Direct-To............................................................................................................. 32
Selecting A Manual Direct-To Course.................................................................................. 33
Entering A VNV Altitude And Along-Track Offset For The Waypoint............................ 33
Removing A VNV Altitude Constraint.................................................................................. 33
FLIGHT PLANNING..................................................................................................................... 33
Creating An Active Flight Plan.............................................................................................. 33
Adding A Waypoint To The Active Flight Plan................................................................... 34
Creating And Adding User Waypoints To The Active Flight Plan................................... 35
Adding An Airway To A Flight Plan...................................................................................... 35
Collapse/Expand Airways in The active Flight Plan......................................................... 35
Storing An Active Flight Plan From The Active Flight Plan Page or the Active Flight
Plan Window............................................................................................................................. 36
Activating A Stored Flight Plan On The MFD..................................................................... 36
Inverting And Activating A Stored Flight Plan On The MFD.......................................... 36
Import a Flight Plan from an SD Card................................................................................. 36
Export a Flight Plan to an SD Card...................................................................................... 37
Previewing a flight plan transfer from a wireless connection...................................... 38
Ignoring a flight plan transfer from a wireless connection........................................... 38
Storing a pending flight plan................................................................................................ 38
Activating a pending flight plan.......................................................................................... 38
Deleting a pending flight plan............................................................................................. 39
ii
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Table of Contents
Deleting all pending flight plans......................................................................................... 39
Deleting The Active Flight Plan and suspending navigation......................................... 40
Deleting An Individual Waypoint From The Active Flight Plan...................................... 40
Deleting An Entire Airway From The Active Flight Plan.................................................. 40
Deleting An Entire Procedure From The Active Flight Plan............................................ 40
Entering An Along Track Offset Distance........................................................................... 41
Activating Parallel Track........................................................................................................ 41
Cancelling Parallel Track........................................................................................................ 42
Activating A Flight Plan Leg.................................................................................................. 42
Inverting The Active Flight Plan........................................................................................... 42
Changing The Flight Plan View............................................................................................. 42
Viewing charts and active flight plan page in split screen mode................................ 43
Displaying the flight plan map on the active flight plan page in split mode........... 43
Creating A User-Defined Hold At An Active Flight Plan Waypoint................................ 43
Creating A User-Defined Hold At The Aircraft Present Position.................................... 44
Creating A User-Defined Hold At A Direct-To Waypoint.................................................. 44
Exiting A User-Defined Hold Inserted Into The Active Flight Plan................................ 45
Removing A User-Defined Hold Inserted Into The Active Flight Plan.......................... 45
Removing A User-Defined Hold At An Off-Route Direct-To............................................ 45
VERTICAL NAVIGATION........................................................................................................... 46
Enabling/Disabling VNV Guidance....................................................................................... 46
Activating A Vertical Navigation Direct-To........................................................................ 46
Modifying The VS TGT And FPA............................................................................................. 46
Altitude Constraints................................................................................................................ 47
Manually Designating A Waypoint Altitude To Be Used For Vertical Guidance......... 48
Manually Designating A Procedure Waypoint Altitude To Be Used For Vertical Guidance............................................................................................................................................. 48
Entering/Modifying An Altitude Constraint....................................................................... 49
Deleting An Altitude Constraint Provided By The Navigation Database.................... 49
Deleting An Altitude Constraint That Has Been Manually Entered.............................. 50
Reverting A Manually Entered Altitude Constraint Back To The Navigation Database Value................................................................................................................................. 50
Modifying A System Calculated Altitude Constraint....................................................... 50
Enabling the Vertical Situation Display.............................................................................. 50
Disabling the Vertical Situation Display............................................................................. 51
PROCEDURES............................................................................................................................... 51
Viewing Available Procedures At An Airport..................................................................... 51
Loading A Procedure Into The Active Flight Plan From The <Procedure> Information Page.................................................................................................................................... 52
Loading A Departure Into The Active Flight Plan Using The PROC Key....................... 53
Removing A Departure Procedure From The Active Flight Plan................................... 53
Loading An Arrival Into The Active Flight Plan Using The PROC Key........................... 53
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
iii
Table of Contents
Removing An Arrival From The Active Flight Plan............................................................ 54
Approach Service levels......................................................................................................... 54
Loading An Approach Into The Active Flight Plan Using The PROC Key...................... 54
Loading an approach into the active flight plan from the ‘NRST - Nearest Airports’
Page............................................................................................................................................ 55
Activating A Previously Loaded Approach......................................................................... 56
Activating A Previously Loaded Approach With Vectors To Final................................. 56
Removing An Approach From The Active Flight Plan...................................................... 56
Activating A Missed Approach In The Active Flight Plan................................................ 57
Activating Temperature Compensated Altitude............................................................... 57
Cancelling Temperature Compensated Altitude............................................................... 57
WEIGHT PLANNING................................................................................................................... 58
Entering Basic Empty Weight................................................................................................ 58
Entering A Pilot And Stores Weight..................................................................................... 58
Entering The Number Of Passengers................................................................................... 58
Entering The Average Passenger Weight........................................................................... 58
Entering The Cargo Weight.................................................................................................... 59
Entering A Fuel On Board Weight......................................................................................... 59
Synchronizing the fuel on board with the actual measured fuel on board............... 59
Entering Fuel Reserve............................................................................................................. 59
TRIP PLANNING.......................................................................................................................... 59
Selecting Automatic Or Manual Page Mode..................................................................... 59
Selecting Flight Plan Or Waypoint Mode........................................................................... 60
Selecting A Flight Plan And Leg For Trip Statistics.......................................................... 60
Selecting Waypoints For Waypoint Mode.......................................................................... 60
Entering Manual Data For Trip Statistics Calculations.................................................... 60
RAIM PREDICTION..................................................................................................................... 61
Predicting RAIM Availability At A Selected Waypoint..................................................... 61
Predicting RAIM Availability At The Aircraft Present Position...................................... 62
Disabling SBAS......................................................................................................................... 62
HAZARD AVOIDANCE................................................................................................................. 63
DATA LINK WEATHER................................................................................................................ 63
Displaying Data Link Weather Products............................................................................. 64
NEXRAD (SiriusXM).................................................................................................................. 66
NEXRAD (FIS-B)......................................................................................................................... 67
Echo Tops (SirisuXM)............................................................................................................... 68
Cloud Tops (SiriusXM)............................................................................................................. 68
Data Link Lightning (SiriusXM)............................................................................................. 68
Cell Movement (SiriusXM)..................................................................................................... 69
SIGMETs and AIRMETs............................................................................................................. 69
iv
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Table of Contents
METARs and TAFs..................................................................................................................... 70
Surface Analysis and City Forecast (SiriusXM).................................................................. 70
Freezing Level (SiriusXM)....................................................................................................... 71
Winds Aloft................................................................................................................................ 71
County Warnings (SiriusXM).................................................................................................. 72
Cyclone (SiriusXM)................................................................................................................... 72
Icing (CIP & SLD) (SiriusXM).................................................................................................. 72
Turbulence (SiriusXM)............................................................................................................. 72
PIREPs and AIREPs................................................................................................................... 73
TFRS............................................................................................................................................ 73
FIS-B Weather........................................................................................................................... 74
TERRAIN DISPLAYS................................................................................................................... 74
Relative Terrain Symbology.................................................................................................. 75
Terrain Page.............................................................................................................................. 76
Vertical Situation Display (VSD) Terrain............................................................................. 77
Terrain-SVT and TAWS-B Alerting Displays........................................................................ 78
TRAFFIC SYSTEMS..................................................................................................................... 78
Traffic Information Service (TIS).......................................................................................... 78
GTS 800 Traffic Advisory System (TAS)................................................................................ 80
ADS-B Traffic............................................................................................................................. 83
AUTOMATIC FLIGHT CONTROL SYSTEM........................................................................... 87
Activating The Flight Director.............................................................................................. 87
Vertical Modes.......................................................................................................................... 88
Lateral Modes........................................................................................................................... 88
Combination Modes (VNV, APR, NAV, BC, GA).................................................................... 89
ADDITIONAL FEATURES............................................................................................................ 91
Terminal Procedure Charts.................................................................................................... 91
Airport Directory..................................................................................................................... 93
SiriusXM™ Radio Entertainment........................................................................................... 94
Scheduler................................................................................................................................... 96
WIFI Connections..................................................................................................................... 97
Crew Profiles............................................................................................................................. 99
Connext Setup........................................................................................................................ 103
ABNORMAL OPERATION........................................................................................................ 105
Reversionary Mode............................................................................................................... 105
Abnormal COM Operation................................................................................................... 105
Hazard Displays with Loss of GPS Position...................................................................... 105
Unusual Attitudes.................................................................................................................. 106
Dead Reckoning..................................................................................................................... 106
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
v
Table of Contents
ANNUNCIATIONS & ALERTS.................................................................................................. 109
G1000 System Annunciations.............................................................................................. 109
CAS Annunciations................................................................................................................. 111
Message Advisories............................................................................................................... 112
Terrain-SVT Alerts.................................................................................................................. 113
Terrain-SVT System Status Annunciations....................................................................... 113
TAWS-B Alerts......................................................................................................................... 114
TAWS-B System Status Annunciations.............................................................................. 116
TIS System Status.................................................................................................................. 117
TIS Traffic Status Annunciations......................................................................................... 118
TAS Traffic Modes.................................................................................................................. 118
TAS Failure Annunciations................................................................................................... 119
TAS Traffic Status Annunciations........................................................................................ 119
ADS-B Traffic Modes.............................................................................................................. 120
ADS-B Traffic Failure Annunciations.................................................................................. 120
ADS-B Traffic Status Annunciations................................................................................... 120
‘Aux-ADS-B Status’ Page Messages................................................................................... 121
GDL 69 SXM Data Link Receiver Messages...................................................................... 122
Voice Alerts............................................................................................................................. 123
System Message Advisories................................................................................................ 123
Flight Plan Import/Export Messages................................................................................. 137
Crew Profile Import/Export Messages.............................................................................. 138
APPENDIX...................................................................................................................................... 139
Softkey Function.................................................................................................................... 139
PFD Softkey Maps.................................................................................................................. 139
MFD Softkey Maps................................................................................................................ 143
Loading Updated Databases............................................................................................... 145
Magnetic Field Variation Database Update..................................................................... 150
Map Symbols.......................................................................................................................... 151
Miscellaneous Symbols........................................................................................................ 155
INDEX..........................................................................................................................................Index-1
vi
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Instruments
Flight
Instruments
FLIGHT INSTRUMENTS
FLIGHT INSTRUMENTS
EIS
Enabling/disabling and modifying Vspeed bugs
1) Press the Tmr/Ref Softkey to show the References Window.
Turn the large FMS Knob to highlight the desired vspeed bug value.
3)
Turn the small FMS Knob to adjust the value for the selected vspeed bug.
Nav/Com/
XPDR/Audio
2)
5)
Turn the small FMS Knob clockwise to ‘On’ or counterclockwise to ‘Off’.
6)
To remove the window, press the CLR Key or the Tmr/Ref Softkey.
Flight
Management
4) Turn the large FMS Knob to highlight the On/Off field.
Hazard
Avoidance
Enabling/disabling or restoring default values to all vspeed bugs as a
group
AFCS
1) Press the Tmr/Ref Softkey.
2) Press the MENU Key.
3) Turn the FMS Knob to highlight ‘All References On’, ‘All References Off’, or
‘Restore Defaults.
Additional
Features
4) Press the ENT Key.
5)
To remove the window, press the CLR Key or the Tmr/Ref Softkey.
Press the PFD Opt Softkey to display the second-level softkeys.
2)
Press the ALT Units Softkey.
3)
Press the Meters Softkey to turn on metric altitude readouts.
4)
Press the Back Softkey twice to return to the top-level softkeys.
Annun/Alerts
1)
Abnormal
Operation
Displaying altitude in meters
Appendix
Selecting the altimeter barometric pressure setting
Turn the BARO Knob to select the desired setting.
Selecting standard barometric pressure (29.92 in Hg)
Press the PFD Opt Softkey to display the second-level softkeys.
2)
Press the STD Baro Softkey.
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
1)
1
Flight Instruments
EIS
Flight
Instruments
Changing altimeter barometric pressure setting units
1)
Press the PFD Opt Softkey to display the second-level softkeys.
2)
Press the ALT Units Softkey.
3)
Press the IN Softkey to display the barometric pressure setting in inches of
mercury (in Hg).
Nav/Com/
XPDR/Audio
Or:
Press the HPA Softkey to display the barometric pressure setting in
hectopascals (hPa).
Flight
Management
4)
Press the Back Softkey twice to return to the top-level softkeys.
1)
Use the FMS Knob to select the ‘AUX - System Setup 1’ Page on the MFD.
2)
Press the FMS Knob to activate the cursor.
3)
Turn the large FMS Knob to highlight ‘Altitude’ in the ‘Baro Transition Alert’
box.
4)
Turn the small FMS Knob to turn the alert ‘Off’ or ‘On’ and press the ENT
Key.
5)
Turn the small FMS Knob to change the altitude and press the ENT Key.
6)
To cancel the selection, press the FMS Knob.
Additional
Features
AFCS
Hazard
Avoidance
Setting the Baro Transition Alert
Abnormal
Operation
Enabling/disabling the HSI Map on the PFD
1)
Press the Map/HSI Softkey.
2)
Press the Layout Softkey.
3)
Press the HSI Map Softkey to enable the HSI Map.
Annun/Alerts
Or:
Press the Map Off Softkey to disable the HSI Map.
Appendix
Adjusting the Selected Heading
Index
T urn the HDG Knob to set the Selected Heading.
P ress the HDG Knob to synchronize the bug to the current heading.
2
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Instruments
Flight
Instruments
Adjusting the Selected Course
Turn the CRS Knob to set the Selected Course.
Press the CRS Knob to re-center the CDI and return the course pointer to
the bearing of the active waypoint or navigation station.
EIS
Changing the navigation angle true/magnetic setting
2)
Press the FMS Knob to activate the cursor.
3)
Turn the large FMS Knob to highlight ‘Nav Angle’ in the ‘Display Units’ box.
4)
Turn the small FMS Knob to highlight the desired setting and press the
ENT Key.
True - References angles to true north (T)
•
Magnetic - Angles corrected to the computed magnetic variation (Mag
Var)
Hazard
Avoidance
•
Flight
Management
Use the FMS Knob to select the ‘AUX - System Setup 1‘ Page on the MFD.
Nav/Com/
XPDR/Audio
1)
Changing navigation sources
2)
Press the CDI Softkey again to change from VOR1 or LOC1 to VOR2 or
LOC2. This places the cyan tuning box over the NAV2 standby frequency.
3)
Press the CDI Softkey a third time to return to FMS.
Additional
Features
Press the CDI Softkey to change from FMS to VOR1 or LOC1. This places
the cyan tuning box over the NAV1 standby frequency in the upper left
corner of the PFD.
AFCS
1)
Abnormal
Operation
Changing the selected FMS CDI setting
2)
Press the FMS Knob to activate the cursor.
3)
Turn the large FMS Knob to highlight ‘Format Allowed’ in the ‘GPS CDI’ box.
4)
Turn the small FMS Knob to highlight the desired setting and press the
ENT Key.
5)
To cancel the selection, press the FMS Knob or the CLR Key.
Appendix
Use the FMS Knob to select the ‘AUX - System Setup 1’ Page on the MFD.
Annun/Alerts
1)
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
3
Flight Instruments
1)
Press the OBS Softkey to select OBS Mode.
2)
Turn the CRS Knob to select the desired course to/from the waypoint. Press
the CRS Knob to synchronize the Selected Course with the bearing to the
next waypoint.
3)
Press the OBS Softkey again to return to automatic waypoint sequencing.
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Enabling/disabling OBS Mode while navigating a GPS flight plan
1)
Press the PFD Opt Softkey.
2)
Press either Bearing 1 or Bearing 2 Softkey to display the desired bearing
pointer and information window with a NAV source.
3)
Press either Bearing 1 or Bearing 2 Softkey again to change the bearing
source to FMS.
4)
Press either Bearing 1 or Bearing 2 Softkey a third time to change the
bearing source to ADF (note: ADF radio installation is optional).
5)
To remove the bearing pointer and information window, press either
Bearing 1 or Bearing 2 Softkey again.
AFCS
Hazard
Avoidance
Flight
Management
Selecting bearing display and changing sources
1)
Press the PFD Opt Softkey.
2)
Press the DME Softkey to display the DME Information Window above the
BRG1 Information Window.
3)
To remove the DME Information Window, press the DME Softkey again.
SUPPLEMENTAL FLIGHT DATA
Controlling the PFD Generic Timer
1)
Press the Tmr/Ref Softkey.
2)
Turn the large FMS Knob to select the timer field (HH:MM:SS).
3)
Use the FMS Knob to enter the desired time.
4)
Press the ENT Key. The Up/Dn field is now highlighted.
5)
Turn the small FMS Knob to display the UP/DOWN Window.
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
Displaying the DME Information Window
4
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Instruments
7)
Press the ENT Key. ‘Start?’ is now highlighted.
8)
Press the ENT Key to start the timer. The field changes to ‘Stop?’. If the
timer is counting DOWN, it will start counting UP after reaching zero.
9)
To stop the timer, press the ENT Key with ‘Stop?’ highlighted. The field
changes to ‘Reset?’.
EIS
Turn the small FMS Knob to select ‘Up’ or ‘Dn’.
Flight
Instruments
6)
Nav/Com/
XPDR/Audio
10) To reset the timer, press the ENT Key with ‘Reset?’ highlighted. The field
changes back to ‘Start?’ and the digits are reset.
11) To remove the window, press the CLR Key or the Tmr/Ref Softkey.
Flight
Management
Changing temperature display units
2)
Press the FMS Knob to activate the cursor.
3)
Turn the large FMS Knob to highlight the ‘Temperature’ field in the Display
Units box.
4)
Turn the small FMS Knob to highlight either ‘Celsius or Fahrenheit’ and
press the ENT Key to confirm the selection.
5)
To cancel the selection, press the FMS Knob or the CLR Key.
AFCS
Select the ‘AUX - System Setup 1’ Page on the MFD using the FMS Knob.
Hazard
Avoidance
1)
Press the PFD Opt Softkey.
2)
Press the Wind Softkey to display wind data to the left of the HSI.
3)
Press one of the Option Softkeys to change how wind data is displayed:
•
Option 1: Headwind/tailwind and crosswind arrows with numeric
speed components
•
Option 2: Wind direction arrow and speed
•
Option 3: Wind direction arrow with headwind/tailwind and crosswind
components
Appendix
To remove the window, press the Off Softkey.
Annun/Alerts
4)
Abnormal
Operation
1)
Additional
Features
Displaying wind data
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
5
Flight
Instruments
Flight Instruments
PFD ANNUNCIATIONS AND ALERTING
Setting the Minimum Descent Altitude/Decision Height and bug
2)
Turn the large FMS Knob to highlight the Minimums field.
3)
Turn the small FMS Knob to select ‘BARO’ or ‘TEMP COMP.’ ‘OFF’ is
selected by default. Press the ENT Key or turn the large FMS Knob to
highlight the next field.
4)
Use the small FMS Knob to enter the desired altitude (from zero to 16,000
feet).
5)
If TEMP COMP was selected, press the ENT Key or turn the large FMS
Knob to highlight the next field and then enter the temperature (-59˚C to
59˚C)
6)
To remove the window, press the CLR Key or the Tmr/Ref Softkey.
GARMIN SYNTHETIC VISION TECHNOLOGY (SVT)
WARNING: Use appropriate primary systems for navigation, and for terrain,
obstacle, and traffic avoidance. SVT is intended as an aid to situational
awareness only and may not provide the accuracy and/or fidelity upon which
to solely base decisions and/or plan maneuvers to avoid terrain, obstacles, or
traffic.
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
1) Press the Tmr/Ref Softkey.
Abnormal
Operation
WARNING: Do not use SVT runway depiction as the sole means for
determining the proximity of the aircraft to the runway or for maintaining
the proper approach path angle during landing.
Annun/Alerts
NOTE: Do not use the flight path marker as a flight director.
Index
Appendix
Activating and deactivating SVT
6
1)
Press the PFD Opt Softkey.
2)
Press the SVT Softkey.
3)
Press the Terrain Softkey. The SVT display will cycle on or off with the
Terrain Softkey.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Instruments
Press the PFD Opt Softkey.
2)
Press the SVT Softkey.
3)
Press the Terrain Softkey.
4)
Press the Pathways Softkey. The Pathway feature will cycle on or off with
the Pathways Softkey.
EIS
1)
Flight
Instruments
Activating and deactivating Pathways
Nav/Com/
XPDR/Audio
Activating and deactivating Horizon Headings
2)
Press the SVT Softkey.
3)
Press the Terrain Softkey.
4)
Press the HDG LBL Softkey. The horizon heading display will cycle on or off
with the HDG LBL Softkey.
Activating and deactivating Airport Signs
2)
Press the SVT Softkey.
3)
Press the Terrain Softkey.
4)
Press the APT Sign Softkey. Display of airport signs will cycle on or off
with the APT Sign Softkey.
Additional
Features
Press the PFD Opt Softkey.
AFCS
1)
Hazard
Avoidance
Press the PFD Opt Softkey.
Flight
Management
1)
Enabling/Disabling SVT Field of View on the Navigation Map
While viewing the ‘Map - Navigation Map’ Page, press the MENU Key to
display the ‘Page Menu’ Window.
2)
Turn the large FMS Knob to highlight ‘Map Settings’ and press the ENT
Key.
3)
Turn the small FMS Knob to select the ‘Map’ Group and press the ENT Key.
4)
Turn the large FMS Knob to scroll through the ‘Map’ Group options to
‘Field of View’.
5)
Turn the small FMS Knob to select ‘On’ or ‘Off’.
6)
Press the FMS Knob to return to the ‘Map - Navigation Map’ page.
Abnormal
Operation
1)
Annun/Alerts
Appendix
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
7
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Flight Instruments
Blank Page
8
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
EIS
Flight
Instruments
ENGINE INDICATION
ENGINE DISPLAY
EIS
1
Nav/Com/
XPDR/Audio
2
Flight
Management
3
4
Hazard
Avoidance
5
6
AFCS
7
8
Additional
Features
9
10
Abnormal
Operation
11
12
Annun/Alerts
Engine Display
Engine Display when Engine Page
is Displayed
Engine Manifold Pressure
Gauge (MAP INHG)
Displays manifold pressure in inches of Mercury (in Hg) to indicate
engine power
2
Tachometer (RPM)
Displays propeller speed in revolutions per minute (rpm)
Appendix
1
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
9
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
EIS
3
Propeller Sync Indicator
Points towards the higher-speed propeller when the
propellers are out of sync.
4
Exhaust Gas Temperature
(EGT °F)
Displays the exhaust gas temperature in °F
5
Fuel Flow Indicator (FFLOW
GPH)
Displays fuel flow in gallons per hour (gph)
6
Oil Pressure Indicator
(OIL PSI)
Displays oil pressure in pounds per square inch (psi)
7
Oil Temperature Indicator
(OIL °F)
Displays oil temperature in degrees Fahrenheit (°F)
8
Alternator Current (ALTR
AMPS)
Displays each alternator current in amperes
9
Voltage (VOLTS)
Displays the bus voltage.
10 Battery Current(BATT AMPS) Displays the battery current in amperes
11 Fuel Quantity Indicator
12 Landing Gear Status
Displays the amount of fuel in gallons (gal) for each side of
a standard fuel tank.
Displays landing gear status
(LANDING GEAR)
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
(FUEL QTY GAL)
10
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
EIS
16
15
Flight
Instruments
ENGINE PAGE
Press the ENGINE Softkey or turn the large FMS Knob and select the EIS - Engine
Page.
14
EIS
1
Nav/Com/
XPDR/Audio
2
3
Flight
Management
4
13
5
12
Hazard
Avoidance
6
11
7
AFCS
10
8
9
Engine Manifold Pressure
Gauge (MAP INHG)
Displays manifold pressure in inches of Mercury (in Hg) to indicate
engine power
2
Tachometer (RPM)
Displays propeller speed in revolutions per minute (rpm)
3
Propeller Sync Indicator
Points towards the higher-speed propeller when the propellers
are out of sync.
4
Exhaust Gas Temperature
(EGT °F)
Displays the exhaust gas temperature in °F
5
Fuel Flow Indicator (FFLOW Displays fuel flow in gallons per hour (gph)
GPH)
6
Oil Pressure Indicator
(OIL PSI)
Annun/Alerts
Appendix
Displays oil pressure in pounds per square inch (psi)
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
190-02199-01 Rev. A
Abnormal
Operation
1
Additional
Features
Engine Page
11
7
Oil Temperature Indicator
(OIL °F)
Displays oil temperature in degrees Fahrenheit (°F)
8
Landing Gear Status
(LANDING GEAR)
Displays landing gear status
9
Fuel Calculations Group
(FUEL CALC)
Displays calculated fuel used (GAL USED), endurance
(ENDUR), and range (in nautical miles, RANGE NM), and
fuel efficiency (in nautical miles per gallon, NMPG) based
on the displayed fuel remaining (GAL REM) and the fuel
flow totalizer
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
EIS
10 Flap Setting Indicator
Displays the setting of the flaps in degrees.
11 Electrical Group
Displays alternator (ALTR AMPS) and battery (BATT AMPS)
currents in amperes and bus voltage (VOLTS)
12 Engine Hours (TACH TIME)
Displays the total time in hours the engine has been in service
AFCS
Hazard
Avoidance
(SYSTEM)
(ELECTRICAL)
13 Carbon Monoxide Detector Displays carbon monoxide information in Parts Per Million
Additional
Features
(CO DETECTOR)
(PPM).
(Optional)
14 Exhaust Gas Temperature
Displays the exhaust gas temperatures for all cylinders in °F
Abnormal
Operation
Bar Graph (EGT °F)
15 Cylinder Head Temperatures Displays cylinder head temperatures in °F
(CHT °F)
16 Fuel Quantity Gauges
Displays the total amount of fuel and the amount of fuel in
gallons (gal) for each side of a standard fuel tank
Index
Appendix
Annun/Alerts
(FUEL)
12
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
EIS
NOTE: Fuel calculations do not use the aircraft fuel quantity indicators
Flight
Instruments
FUEL CALCULATIONS
and are calculated from the last time the fuel was reset.
Nav/Com/
XPDR/Audio
Adjusting the fuel totalizer quantity
EIS
Fuel used (GAL USED), endurance (ENDUR), range (in nautical miles, RANGE
NM), and fuel efficiency (in nautical miles per gallon, NMPG) are calculated based on
the displayed fuel remaining (GAL REM) and the fuel flow totalizer. The calculated
range also takes into account the aircraft’s heading and the wind direction and speed.
Flight
Management
On the ‘EIS - Engine’ Page, use the DEC Fuel and INC Fuel softkeys to
obtain the desired fuel remaining (GAL REM).
On the ‘EIS - Engine’ Page, press the RST Fuel Softkey; this resets displayed
fuel remaining (GAL REM) to the maximum fuel capacity for the aircraft and
fuel used to zero.
Hazard
Avoidance
Resetting the fuel totalizer
AFCS
CARBON MONOXIDE DETECTOR (OPTIONAL)
Additional
Features
Reset the Carbon Monoxide Detector
On the ‘EIS - Engine’ Page, push CO RST softkey.
Abnormal
Operation
Annun/Alerts
Appendix
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
13
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
EIS
Blank Page
14
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Nav/Com/XPDR/Audio Panel
Flight
Instruments
NAV/COM/TRANSPONDER/AUDIO PANEL
COM OPERATION
EIS
Manually tuning a COM frequency
2)
Press the Frequency Transfer Key to transfer the frequency to the active field.
3)
Adjust the volume level with the COM VOL/SQ Knob.
4)
Press the COM VOL/SQ Knob to turn automatic squelch on and off.
Flight
Management
Turn the COM Knob to tune the desired frequency (large knob for MHz;
small knob for kHz).
Nav/Com/
XPDR/Audio
1)
Auto-tuning a COM frequency for a nearby airport from the PFD
Turn the FMS Knob to scroll through the list and highlight the desired COM
frequency.
3)
Press the ENT Key to load the COM frequency into the COM Standby Tuning
Box.
4)
Press the Frequency Transfer Key to transfer the frequency to the COM
Active Frequency Field.
Additional
Features
2)
AFCS
Press the NRST Softkey on the PFD to open the Nearest Airports Window. A
list of 25 nearest airport identifiers and COM frequencies is displayed.
Hazard
Avoidance
1)
Auto-tuning a COM frequency from the WPT and NRST Pages
From any page that the COM frequency can be auto-tuned, activate the
cursor by pressing the FMS Knob or pressing the appropriate softkey.
2)
Turn the FMS Knob to place the cursor on the desired COM frequency.
3)
Press the ENT Key to load the COM frequency into the standby field of the
selected COM radio.
4)
Press the Frequency Transfer Key on either PFD to transfer the frequency to
the COM Active Frequency Field.
Abnormal
Operation
1)
Annun/Alerts
Appendix
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
15
Nav/Com/XPDR/Audio Panel
1)
Select the ‘Aux – System Setup 1’ Page.
2)
Press the FMS Knob to activate the flashing cursor.
3)
Turn the large FMS Knob to highlight the Channel Spacing Field in the
COM Configuration Box.
4)
Turn the small FMS Knob to select the desired channel spacing.
5)
Press the ENT Key to complete the channel spacing selection.
NAV OPERATION
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Changing COM frequency channel spacing
1)
Turn the NAV Knob to tune the desired frequency in the NAV Tuning Box.
2)
Press the Frequency Transfer Key to transfer the frequency to the NAV Active
Frequency Field.
3)
Adjust the volume level with the NAV VOL/ID Knob.
4)
Press the NAV VOL/ID Knob to turn the Morse code identifier audio on and
off.
AFCS
Hazard
Avoidance
Manually tuning a NAV frequency
1)
From any page that the NAV frequency can be auto-tuned, activate the
cursor by pressing the FMS Knob or the appropriate softkey.
2)
Turn the FMS Knob to place the cursor on the desired NAV identifier or
NAV frequency.
3)
On the Nearest VOR and Nearest Airports pages, press the FREQ Softkey to
place the cursor on the NAV frequency.
4)
Press the ENT Key to load the NAV frequency into the standby field of the
selected NAV radio.
5)
Press the Frequency Transfer Key to transfer the frequency to the NAV
Active Frequency Field.
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
Auto-tuning a NAV frequency from the WPT and NRST Pages
16
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Nav/Com/XPDR/Audio Panel
Flight
Instruments
Tuning an ADF frequency
Press the ADF/DME Softkey to display the ADF/DME Tuning Window.
2)
Turn the large FMS Knob to place the selection cursor over the standby ADF
frequency field.
3)
Turn the small FMS Knob to begin data entry and change each digit.
4)
Turn the large FMS Knob to move the cursor to the next digit position.
5)
Press the ENT Key to complete data entry for the standby frequency.
EIS
1)
Nav/Com/
XPDR/Audio
Transferring the active and standby ADF frequencies
Turn the large FMS Knob to place the selection cursor over the standby ADF
frequency field.
2)
Press the ENT Key to complete the frequency transfer.
Turn the large FMS Knob to place the selection cursor over the ADF mode
field.
2)
Turn the small FMS Knob to select the desired ADF receiver mode.
AFCS
1)
Hazard
Avoidance
Selecting an ADF receiver mode
Flight
Management
1)
Adjusting ADF receiver volume
Turn the large FMS Knob to place the selection cursor over the ADF volume
field.
2)
Turn the small FMS Knob to adjust volume as desired.
Abnormal
Operation
Selecting DME transceiver pairing
Press the ADF/DME Softkey to display the ADF/DME Tuning Window.
2)
Turn the small FMS Knob to select the DME tuning mode.
3)
Press the ENT Key to complete the selection.
Annun/Alerts
1)
Additional
Features
1)
TRANSPONDER CONTROLS
Appendix
Selecting a transponder mode
Press the XPDR Softkey to display the Transponder Mode Selection Softkeys.
2)
Press the desired softkey to activate the transponder mode.
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
1)
17
PILOT KEY
Annunciator
Pilot Hears
Copilot Hears
Passenger
Hears
OFF
OFF
Selected radios;
aural alerts;
pilot; copilot;
passengers; music
Selected radios;
aural alerts;
pilot; copilot;
passengers; music
Selected radios;
aural alerts; pilot;
copilot; passengers;
music
ON
OFF
Selected radios;
aural alerts; pilot
Copilot;
passengers;
music
Copilot;
passengers;
music
OFF
ON
Selected radios;
aural alerts; pilot; Copilot
passengers; music
Selected radios;
aural alerts; pilot;
passengers; music
ON
ON
Selected radios;
aural alerts; pilot;
copilot
Passengers;
music
Selected radios;
aural alerts; pilot;
copilot
Intercom Volume and Squelch
The PILOT/PASS Knob controls volume or manual squelch adjustment for the
pilot and copilot/passenger. The small knob controls the pilot volume and squelch.
The large knob controls the copilot/passenger volume and squelch. The VOL and SQ
annunciations at the bottom of the unit indicate which function the knob is controlling. Pressing the PILOT/PASS Knob switches between volume and squelch control
as indicated by the VOL or SQ annunciation being illuminated.
The MAN SQ Key allows either automatic or manual control of the squelch setting.
• When the MAN SQ Annunciator is extinguished (Automatic Squelch is on),
the PILOT/PASS Knob controls only the volume (pressing the PILOT/PASS
Knob has no effect on the VOL/SQ selection).
• When the MAN SQ Annunciator is illuminated (Manual Squelch), the PILOT/
PASS Knob controls either volume or squelch (selected by pressing the
PILOT/PASS Knob and indicated by the VOL or SQ annunciation).
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
COPLT KEY
Annunciator
Nav/Com/
XPDR/Audio
INTERCOM
The Audio Panel includes a four-position intercom system (ICS) and a stereo music
input for the pilot, copilot and up to four passengers. The intercom provides Pilot and
Copilot isolation from the passengers and aircraft radios.
Flight
Management
EIS
Flight
Instruments
Nav/Com/XPDR/Audio Panel
18
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Nav/Com/XPDR/Audio Panel
Adjust radio volume levels (COM, NAV) to a suitable level.
5)
Adjust the PILOT/PASS Knob volume to the desired intercom level.
6)
Reset squelch to automatic, or adjust to the appropriate level manually.
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
4)
Appendix
Turn the PILOT/PASS Knobs clockwise two full turns. This sets the
intercom level to max volume (least amount of attenuation).
Annun/Alerts
3)
Abnormal
Operation
Verify manual squelch is set to full open.
Additional
Features
2)
AFCS
Verify that the PILOT and COPLT Annunciators are extinguished.
Hazard
Avoidance
1)
Flight
Management
Setting the Audio Panel during preflight
Nav/Com/
XPDR/Audio
AUDIO PANEL PREFLIGHT PROCEDURE
EIS
CLEARANCE RECORDER AND PLAYER
The PLAY Key controls the play function. The PLAY annunciator remains lit to
indicate when play is in progress. The PLAY annunciator turns off after playback is
finished.
Pressing the PLAY Key once plays the latest recorded memory block and then
returns to normal operation. Pressing the PLAY Key again during play of a memory
block stops play. If a COM input signal is detected during play of a recorded memory
block, play is halted.
Pressing the PLAY Key twice within one-half second while audio is playing plays
the previous block of recorded audio. Each subsequent two presses of the PLAY Key
within one-half second backtracks through the recorded memory blocks to reach and
play any recorded block.
Powering off the unit automatically clears all recorded blocks.
Flight
Instruments
PASSENGER ADDRESS (PA) SYSTEM
A passenger address system is provided by pressing the PA Key to deliver messages
to the passengers. The message is heard by the other pilot on the headset only if the
INTR COM Key is enabled. PA messages are one way from the flight deck to the passengers.
A Push-to-talk (PTT) must be pressed to deliver PA announcements to the passengers over their headphones.
When PA is selected on the Audio Panel, the annunciator flashes about once per
second while pressing the PTT, the COM MIC annunciator is no longer lit, and the
active COM frequency for that Audio Panel changes to white, indicating that there is
no COM selected.
19
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Nav/Com/XPDR/Audio Panel
Blank Page
20
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Management
Flight
Instruments
FLIGHT MANAGEMENT
CHANGING A FIELD IN THE MFD NAVIGATION DATA BAR
Select the ‘Aux - System Setup 1’ Page.
2)
Press the FMS Knob momentarily to activate the flashing cursor.
3)
Turn the large FMS Knob to highlight the desired field number in the MFD
Data Bar Fields Box.
4)
Turn the small FMS Knob to display and scroll through the data options list
to select the desired data.
5)
Press the ENT Key. Pressing the Defaults Softkey returns all fields to the
default setting.
EIS
1)
Flight
Management
Hazard
Avoidance
CHANGING THE NAVIGATION MAP ORIENTATION
With the ‘Map - Navigation Map’ Page displayed, press the MENU Key.
The cursor flashes on the ‘Map Settings’ option.
2)
Press the ENT Key to display the Map Settings Window.
3)
Select the ‘Map’ group if necessary. Turn the large FMS Knob, or press the
ENT Key once, to select the ‘Orientation’ field.
4)
Turn the small FMS Knob to select the desired orientation.
5)
Press the ENT Key to select the new orientation.
6)
Press the FMS Knob to return to the base page.
AFCS
1)
Highlight the ‘North Up Above’ field.
6)
Select ‘On’ or ‘Off’ using the small FMS Knob.
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
5)
Appendix
Press the ENT Key.
Annun/Alerts
4)
Abnormal
Operation
Select the ‘Map’ group.
Additional
Features
ENABLING/DISABLING AUTO NORTH UP AND SELECTING THE MINIMUM
SWITCHING RANGE
1) Press the MENU Key with the ‘Map - Navigation Map’ Page displayed. The
cursor flashes on the ‘Map Settings’ option.
2) Press the ENT Key. The ‘Map Settings’ Window is displayed.
3)
Nav/Com/
XPDR/Audio
USING MAP DISPLAYS
21
7)
Press the ENT Key to accept the selected option. The flashing cursor
highlights the range field.
8)
Use the small FMS Knob to select the desired range.
9)
Press the ENT Key to accept the selected option.
10) Press the FMS Knob to return to the Navigation Map Page.
Press the MENU Key with the ‘Map - Navigation Map’ Page displayed. The
cursor flashes on the ‘Map Settings’ option.
2)
Press the ENT Key. The ‘Map Settings’ Window is displayed.
3)
Select the ‘Map’ group.
4)
Press the ENT Key.
5)
Highlight the ‘Auto Zoom’ on/off field, and select ‘Off’ or ‘On’ using the
small FMS Knob.
6)
Press the ENT Key to accept the selected option. The flashing cursor
highlights the ‘Auto Zoom’ display selection field.
7)
Select ‘MFD’, ‘PFD’, or ‘All’ using the small FMS Knob.
8)
Press the ENT Key to accept the selected option. The flashing cursor
highlights the ‘Max Look FWD’ field. Times are from zero to 999 minutes.
9)
Use the FMS Knobs to set the time. Press the ENT Key.
11) Press the FMS Knob to return to the Navigation Map Page.
AFCS
Hazard
Avoidance
Flight
Management
1)
Additional
Features
CONFIGURING AUTOMATIC ZOOM
Abnormal
Operation
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Flight Management
10) Repeat step 9 for ‘Min Look FWD’ (zero to 99 minutes) and ‘Time Out’ (zero
to 99 minutes).
Appendix
Annun/Alerts
PANNING THE MAP
1)
Push the Joystick to display the Map Pointer.
2)
Move the Joystick to move the Map Pointer around the map.
3)
Push the Joystick to remove the Map Pointer and recenter the map on the
aircraft’s current position.
REVIEWING INFORMATION FOR AN AIRPORT, NAVAID, OR USER WAYPOINT
Index
1)
22
With the desired map page displayed, push the Joystick to display the
Map Pointer and place the Map Pointer on a waypoint.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Management
3)
Press the Go Back Softkey, the CLR Key, or the ENT Key to exit the
Waypoint Information Page and return to the Navigation Map showing the
selected waypoint.
EIS
Press the ENT Key to display the Waypoint Information Page for the
selected waypoint.
Flight
Instruments
2)
REVIEWING INFORMATION FOR A SPECIAL-USE OR CONTROLLED AIRSPACE
Press the ENT Key to display an options menu.
3)
‘Review Airspaces’ should already be highlighted, if not select it. Press the
ENT Key to display the Information Window for the selected airspace.
4)
Press the FMS Knob, the CLR Key, or the ENT Key to exit the Information
Window.
Hazard
Avoidance
2)
Press the TER Softkey until ‘Topo’ is shown on the softkey to display
topographic data.
3)
Press the TER Softkey until ‘Off’ is shown on the softkey to remove
topographic data from the navigation map. When topographic data
is removed from the page, all navigation data is presented on a black
background.
Abnormal
Operation
2)
Additional
Features
With the desired map page displayed, press the Map Opt Softkey.
AFCS
DISPLAYING/REMOVING TOPOGRAPHIC DATA ON ALL MFD PAGES
DISPLAYING NAVIGATION MAPS
1)
Press the TER Softkey until ‘Topo’ is shown on the softkey to display
topographic data.
3)
Press the TER Softkey until ‘Off’ is shown on the softkey to remove
topographic data from the navigation map. When topographic data
is removed from the page, all navigation data is presented on a black
background.
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
2)
Appendix
Press the Map/HSI Softkey on the PFD.
Annun/Alerts
DISPLAYING/REMOVING TOPOGRAPHIC DATA ON THE PFD MAP
1)
Flight
Management
With the desired map page displayed, push the Joystick to display the
Map Pointer and place the Map Pointer on an open area within the
boundaries of an airspace. (As the Map Pointer crosses the airspace
boundary, the boundary is highlighted and airspace information is shown.)
Nav/Com/
XPDR/Audio
1)
23
DISPLAYING/REMOVING TOPOGRAPHIC DATA USING THE NAVIGATION MAP
PAGE MENU
Press the MENU Key with the ‘Map - Navigation Map’ Page displayed. The
cursor flashes on the ‘Map Settings’ option.
2)
Press the ENT Key. The ‘Map Settings’ Window is displayed.
3)
Select the ‘Map’ group.
4)
Press the ENT Key.
5)
Highlight the ‘Terrain Display’ field.
6)
Select ‘Topo’ or ‘Off’.
7)
Press the FMS Knob to return to the ‘Map - Navigation Map’ Page.
AFCS
Additional
Features
Abnormal
Operation
1)
Press the MENU Key with the ‘Map - Navigation Map’ Page displayed. The
cursor flashes on the ‘Map Settings’ option.
2)
Press the ENT Key. The ‘Map Settings’ Window is displayed.
3)
Turn the small FMS Knob to select the desired group.
4)
Press the ENT Key. The cursor flashes on the first field.
5)
Turn the large FMS Knob to select the desired option.
6)
Turn the small FMS Knob to select the desired setting (e.g. On/Off or
maximum range).
7)
Press the ENT Key to accept the selected option and move the cursor to the
next item.
8)
Repeat steps 5-7 as necessary.
9)
Press the FMS Knob to return to the ‘Map - Navigation Map’ Page.
DECLUTTERING THE MAP
Select the Detail Softkey with the Navigation Map Page displayed. The
current declutter level is shown. With each softkey selection, another level
of map information is removed.
Appendix
Annun/Alerts
1)
SETTING UP THE ‘LAND’, ‘AVIATION’ OR ‘AIRSPACE’ GROUP ITEMS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Flight Management
Index
DECLUTTERING THE PFD MAP
24
1)
Press the Map/HSI Softkey on the PFD.
2)
Press the Detail Softkey. The current declutter level is shown. With each
selection, another level of map information is removed.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Management
With the desired map page displayed, press the Map Opt Softkey.
2)
Press the AWY Softkey. Both High and Low Altitude Airways are displayed
(AWY On).
3)
Press the softkey again to display Low Altitude Airways only (AWY LO).
4)
Press the softkey again to display High Altitude Airways only (AWY HI).
5)
Press the softkey again to remove High Altitude Airways. No airways are
displayed (AWY Off).
EIS
1)
Flight
Instruments
DISPLAYING/REMOVING AIRWAYS
Nav/Com/
XPDR/Audio
Press the ENT Key. The ‘Map Settings’ Window is displayed.
3)
Turn the small FMS Knob to select the ‘Airways’ group, and press the ENT
Key.
4)
Highlight the ‘Low ALT Airways’ or ‘High ALT Airways’ range field.
5)
To change the range setting, turn the small FMS Knob to display the range
list.
6)
Select the desired range using the small FMS Knob.
7)
Press the ENT Key.
8)
Press the FMS Knob to return to the Navigation Map Page.
Additional
Features
2)
AFCS
Press the MENU Key with the ‘Map - Navigation Map’ Page displayed. The
cursor flashes on the ‘Map Settings’ option.
Hazard
Avoidance
1)
Flight
Management
SELECTING AN AIRWAY RANGE (LOW ALT AIRWAYS OR HIGH ALT AIRWAYS)
Press the MENU Key with the ‘Map - Navigation Map’ Page displayed. The
cursor flashes on the ‘Map Settings’ option.
2)
Press the ENT Key. The ‘Map Settings’ Window is displayed.
3)
Turn the small FMS Knob to select the ‘Map’ group.
4)
Press the ENT Key. The cursor flashes on the first field.
5)
Turn the large FMS Knob to select the desired option.
6)
Turn the small FMS Knob to select ‘On’ or ‘Off’.
Annun/Alerts
1)
Abnormal
Operation
SETTING UP ADDITIONAL ‘MAP’ GROUP ITEMS
Appendix
Or:
7)
Press the ENT Key to accept the selected option and move the cursor to the
next item.
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
25
Index
If it is a data field, use the FMS Knob to select the range or time value.
Flight
Instruments
Flight Management
8)
Repeat steps 5-7 as necessary.
9)
Press the FMS Knob to return to the ‘Map - Navigation Map’ Page.
SELECTING AN AIRPORT FOR REVIEW BY IDENTIFIER, FACILITY NAME, OR
LOCATION
AFCS
Additional
Features
From the ‘WPT - Airport Information’ Page, press the FMS Knob.
2)
Use the FMS Knobs and enter an identifier, facility name, or location.
3)
Press the ENT Key.
4)
Press the FMS Knob to remove the cursor.
1)
With the ‘WPT - Airport Information’ Page 1 displayed, press the FMS Knob
to activate the cursor.
2)
Turn the large FMS Knob to place the cursor in the ‘Runways’ Box, on the
runway designator.
3)
Turn the small FMS Knob to display the desired runway (if more than one)
for the selected airport.
4)
To remove the flashing cursor, press the FMS Knob.
VIEWING A DESTINATION AIRPORT
From the Airport Information Page press the MENU Key. Select ‘View
Destination Airport’. The Destination Airport is displayed.
VIEWING INFORMATION FOR A NEAREST AIRPORT ON THE PFD
Index
Appendix
Annun/Alerts
Abnormal
Operation
1)
SELECTING A RUNWAY
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
WAYPOINTS
26
1)
Press the Nearest Softkey to display the ‘Nearest Airports’ Window.
2)
Highlight the airport identifier with the FMS Knob and press the ENT Key
to display the ‘Airport Information’ Window.
3)
To return to the ‘Nearest Airports’ Window press the ENT Key (with the
cursor on ‘BACK’) or press the CLR Key. The cursor is now on the next
airport in the nearest airports list. (Repeatedly pressing the ENT Key moves
through the airport list, alternating between the ‘Nearest Airports’ Window
and the ‘Airport Information’ Window.)
4)
Press the CLR Key or the Nearest Softkey to close the PFD ‘Nearest Airports’
Window.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Management
Turn the small FMS Knob to select the ‘NRST - Nearest Airports’ Page (it is
the first page of the group, so it may already be selected). If there are no
Nearest Airports available, ‘None Within 200nm’ is displayed.
3)
Press the APT Softkey; or press the FMS Knob; or press the MENU Key,
highlight ‘Select Airport Window’ and press the ENT Key. The cursor is
placed in the ‘Nearest Airports’ Box. The first airport in the nearest airports
list is highlighted.
4)
Turn the FMS Knob to highlight the desired airport. (Pressing the ENT Key
also moves to the next airport.)
5)
Press the FMS Knob to remove the flashing cursor.
With the ‘NRST - Nearest Airports’ Page displayed, press the RNWY
Softkey; or press the MENU Key, highlight ‘Select Runway Window’; and
press the ENT Key. The cursor is placed in the ‘Runways’ Box.
2)
Turn the small FMS Knob to select the desired runway.
3)
Press the FMS Knob to remove the flashing cursor.
AFCS
1)
Hazard
Avoidance
VIEWING RUNWAY INFORMATION FOR A SPECIFIC AIRPORT
With the ‘WPT - Intersection Information’ Page displayed, enter an identifier
in the ‘Intersection’ Box.
2)
Press the ENT Key.
3)
Press the FMS Knob to remove the flashing cursor.
Abnormal
Operation
1)
Press the ENT Key.
3)
Press the FMS Knob to remove the flashing cursor.
Appendix
2)
Annun/Alerts
SELECTING AN NDB
With the ‘WPT - NDB Information’ Page displayed, enter an identifier, the
name of the NDB, or the city in which it’s located in the ‘NDB’ Box.
Additional
Features
SELECTING AN INTERSECTION
1)
Flight
Management
2)
Nav/Com/
XPDR/Audio
Turn the large FMS Knob to select the NRST page group.
EIS
1)
Flight
Instruments
VIEWING INFORMATION FOR A NEAREST AIRPORT ON THE MFD
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
27
SELECTING A VOR
EIS
Flight
Instruments
Flight Management
1)
With the ‘WPT - VOR Information’ Page displayed, enter an identifier, the
name of the VOR, or the city in which it’s located in the ‘VOR’ Box.
2)
Press the ENT Key.
3)
Press the FMS Knob to remove the flashing cursor.
Nav/Com/
XPDR/Audio
1)
With the ‘WPT - VRP Information’ Page displayed, enter the identifier or
the name of the VRP in the ‘VRP’ Box.
2)
Press the ENT Key.
Flight
Management
SELECTING A VRP
3)
Press the FMS Knob to remove the flashing cursor.
1)
With the ‘WPT - User WPT Information’ Page displayed, enter the name of
the User Waypoint, or scroll to the desired waypoint in the ‘User Waypoint
List’ Box using the large FMS Knob.
2)
Press the ENT Key.
3)
Press the FMS Knob to remove the flashing cursor.
CREATING USER WAYPOINTS FROM THE USER WAYPOINT INFORMATION
PAGE
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
SELECTING A USER WAYPOINT
1)
Press the New Softkey, or press the MENU Key and select ‘Create New
User Waypoint’.
2)
Enter a user waypoint name (up to six characters).
3)
Press the ENT Key. The current aircraft position is the default location of
the new waypoint.
4)
If desired, define the type and location of the waypoint in one of the
following ways:
Appendix
Select ‘RAD/RAD’ using the small FMS Knob, press the ENT Key,
and enter the two reference waypoint identifiers and radials into the
‘Reference Waypoints’ Box using the FMS Knobs.
Or:
Index
Select ‘RAD/DIS’ using the small FMS Knob, press the ENT Key, and
enter the reference waypoint identifier, the radial, and the distance into
the ‘Reference Waypoints’ Box using the FMS Knobs.
Or:
28
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Management
6)
If desired, change the storage method of the waypoint to temporary by
moving the cursor to ‘Temporary’ and selecting the ENT Key to check the
box.
7)
Press the FMS Knob to remove the flashing cursor.
Nav/Com/
XPDR/Audio
Press the ENT Key to accept the new waypoint.
EIS
5)
Flight
Instruments
Select ‘LAT/LON’ using the small FMS Knob, press the ENT Key, and
enter the latitude and longitude into the ‘Information’ Box using the
FMS Knobs.
CREATING USER WAYPOINTS FROM MAP PAGES
Press the ENT Key. The ‘WPT - User WPT Information’ Page is displayed
with the captured position.
3)
Enter a user waypoint name (up to six characters).
4)
Press the ENT Key to accept the selected name. The first reference
waypoint box is highlighted.
5)
If desired, define the type and location of the waypoint in one of the
following ways:
AFCS
2)
Hazard
Avoidance
Push the Joystick to activate the panning function and pan to the map
location of the desired user waypoint.
Flight
Management
1)
Additional
Features
Select ‘RAD/RAD’ using the small FMS Knob, press the ENT Key,
and enter the two reference waypoint identifiers and radials into the
‘Reference Waypoints’ Box using the FMS Knobs.
Or:
Select ‘RAD/DIS’ using the small FMS Knob, press the ENT Key, and
enter the reference waypoint identifier, the radial, and the distance into
the ‘Reference Waypoints’ Box using the FMS Knobs.
Abnormal
Operation
Or:
Annun/Alerts
Press the ENT Key to accept the new waypoint.
7)
If desired, change the storage method of the waypoint to temporary by
moving the cursor to ‘Temporary’ and selecting the ENT Key to check or
uncheck the box.
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
6)
Appendix
Select ‘LAT/LON’ using the small FMS Knob, press the ENT Key, and
enter the latitude and longitude into the ‘Information’ Box using the
FMS Knobs.
29
Flight
Instruments
Flight Management
8)
Press the FMS Knob to remove the flashing cursor.
9)
Press the Go Back Softkey to return to the map page.
With the ‘WPT - User WPT Information’ Page displayed, press the FMS
Knob to activate the cursor.
2)
Highlight a User Waypoint in the ‘User Waypoint List’ Box, or enter a
waypoint in the ‘User Waypoint’ Box.
3)
Press the Delete Softkey or press the CLR Key. ‘Yes’ is highlighted in the
confirmation window.
4)
Press the ENT Key.
5)
Press the FMS Knob to remove the flashing cursor.
CHANGING THE ALTITUDE BUFFER DISTANCE SETTING
Additional
Features
1)
Use the FMS Knob to select the ‘Aux - System Setup 1’ Page.
2)
Press the FMS Knob momentarily to activate the flashing cursor.
3)
Turn the large FMS Knob to highlight the ‘Altitude Buffer’ Field in the
‘Airspace Alerts’ Box.
4)
Use the FMS Knob to enter an altitude buffer value and press the ENT Key.
5)
Press the FMS Knob to remove the flashing cursor.
TURNING AN AIRSPACE ALERT ON OR OFF
1)
Use the FMS Knob to select the ‘Aux - System Setup 1’ Page.
2)
Press the FMS Knob momentarily to activate the flashing cursor.
3)
Turn the large FMS Knob to highlight the desired field in the ‘Airspace
Alerts’ Box.
4)
Turn the small FMS Knob clockwise to turn the airspace alert on or
counterclockwise to turn the alert off.
5)
Press the FMS Knob to remove the flashing cursor.
Index
Appendix
Annun/Alerts
Abnormal
Operation
1)
AIRSPACES
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
DELETING A SINGLE USER WAYPOINT
30
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Management
Flight
Instruments
SELECTING AND VIEWING AN AIRSPACE ALERT WITH ITS ASSOCIATED
INFORMATION
2)
Press the Alerts Softkey; or press the FMS Knob; or press the MENU
Key, highlight ‘Select Alerts Window’, and press the ENT Key. The cursor is
placed in the ‘Airspace Alerts’ Box.
3)
Select the desired airspace.
4)
Press the FMS Knob to remove the flashing cursor.
Nav/Com/
XPDR/Audio
Select the ‘NRST - Nearest Airspaces’ Page.
EIS
1)
TURNING SMART AIRSPACE ON OR OFF
Flight
Management
Press the MENU Key, and press the ENT Key. The cursor is placed in the
‘Group’ Box.
3)
Turn the small FMS Knob to highlight the ‘Airspace’ in the ‘Group’ Box and
press the ENT Key.
4)
Turn the large FMS Knob to highlight the ‘Smart Airspace’ Field in the ‘Map
Settings’ Window.
5)
Turn the small FMS Knob clockwise to turn Smart Airspace ‘On’ or
counterclockwise to turn smart airspace ‘Off’.
6)
Press the FMS Knob to remove the flashing cursor.
Additional
Features
2)
DIRECT-TO NAVIGATION
Turn the small FMS Knob clockwise to begin entering a waypoint identifier
(turning it counter-clockwise brings up the waypoint selection submenu press the CLR Key to remove it), or turn the large FMS Knob to select the
facility name, or city field and turn the small FMS Knob to begin entering
a facility name or city. If duplicate entries exist for the entered facility or
city name, additional entries can be viewed by turning the small FMS Knob
during the selection process.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
31
Index
2)
Appendix
Press the Direct-to Key. The ‘Direct To’ Window is displayed (with the
active flight plan waypoint as the default selection or a blank waypoint field
if no flight plan is active).
Annun/Alerts
1)
Abnormal
Operation
ENTERING A WAYPOINT IDENTIFIER, FACILITY NAME, OR CITY AS A DIRECTTO DESTINATION
190-02199-01 Rev. A
AFCS
Use the FMS Knob to select the ‘Map - Navigation Map’ Page.
Hazard
Avoidance
1)
Press the ENT Key. The ‘Activate?’ Field is highlighted.
4)
Press the ENT Key to activate the direct-to.
Flight
Management
1)
While navigating an active flight plan, press the Direct-to Key. The ‘Direct
To’ Window is displayed with the active flight plan waypoint as the default
selection.
2)
Turn the small FMS Knob counter-clockwise to display a list of flight plan
waypoints (the FPL list is populated only when navigating a flight plan).
3)
Select the desired waypoint.
4)
Press the ENT Key. The cursor is now displayed on ‘Activate?’.
5)
Press the ENT Key again to activate the direct-to.
SELECTING A NEAREST, RECENT OR USER WAYPOINT AS A DIRECT-TO
DESTINATION
1)
Press the Direct-to Key. The ‘Direct To’ Window is displayed (with the
active flight plan destination as the default selection or a blank destination
if no flight plan is active).
2)
Turn the small FMS Knob counter-clockwise to display a list of flight plan
waypoints (the FPL list is populated only when navigating a flight plan).
3)
Turn the small FMS Knob clockwise to display the Nearest, Recent or User
waypoints.
4)
Turn the large FMS Knob clockwise to select the desired waypoint.
5)
Press the ENT Key. The cursor is now displayed on ‘Activate?’.
6)
Press the ENT Key again to activate the direct-to.
CANCELLING A DIRECT-TO
1)
Press the Direct-to Key to display the ‘Direct To’ Window.
2)
Press the MENU Key.
3)
With ‘Cancel Direct-To NAV’ highlighted, press the ENT Key. If a flight
plan is still active, the system resumes navigating the flight plan along the
closest leg.
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
3)
SELECTING AN ACTIVE FLIGHT PLAN WAYPOINT AS A DIRECT-TO
DESTINATION
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Flight Management
32
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Management
2)
Highlight the course field.
3)
Enter the desired course.
4)
Press the ENT Key. The cursor is now displayed on ‘Activate?’.
5)
Press the ENT Key again to activate the direct-to.
Nav/Com/
XPDR/Audio
Press the Direct-to Key. The ‘Direct To’ Window is displayed with the
destination field highlighted.
EIS
1)
Flight
Instruments
SELECTING A MANUAL DIRECT-TO COURSE
Flight
Management
ENTERING A VNV ALTITUDE AND ALONG-TRACK OFFSET FOR THE
WAYPOINT
Press the Direct-to Key to display the ‘Direct To’ Window.
2)
Turn the large FMS Knob to place the cursor over the ‘VNV’ altitude field
(‘ALT’ field on the PFD).
3)
Enter the desired altitude.
4)
Press the ENT Key to accept the altitude constraint.
5)
If the selected waypoint is an airport, an additional choice is displayed. Turn
the small FMS Knob to choose ‘MSL’ or ‘AGL’.
6)
Press the ENT Key. The cursor is now flashing in the VNV offset distance
(‘Offset’ Field).
7)
Enter the desired along-track distance before the waypoint.
8)
Press the ENT Key. The ‘Activate?’ Field is highlighted.
9)
Press the ENT Key to activate.
Hazard
Avoidance
1)
Additional
Features
Abnormal
Operation
Press the Direct-to Key to display the ‘Direct To’ Window.
2)
Press the MENU Key.
3)
With ‘Clear Vertical Constraints’ highlighted, press the ENT Key.
Annun/Alerts
1)
Appendix
FLIGHT PLANNING
CREATING AN ACTIVE FLIGHT PLAN
1)
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
Press the FPL Key. Press the FMS Knob to activate the cursor (only on
MFD).
190-02199-01 Rev. A
AFCS
REMOVING A VNV ALTITUDE CONSTRAINT
33
Flight Management
Flight
Instruments
2) Select the departure airport and runway.
a) Highlight the departure airport identifier using the FMS Knob
b) Use the FMS Knob or the waypoint submenu to enter the identifier,
facility, or city name of the departure waypoint.
EIS
c) Press the ENT Key. The ‘Set Runway’ Window is displayed with the
‘Runway’ field highlighted.
Nav/Com/
XPDR/Audio
d) Turn the small FMS Knob to select the runway, and press the ENT Key.
e) Press the ENT Key again to add the departure airport/runway to the
flight plan.
Flight
Management
3) Repeat step number 2 for the destination airport and runway.
4) Select the enroute waypoints.
Hazard
Avoidance
a) Highlight the location to insert the waypoint using the FMS Knob (If
the enroute header is selected, the new waypoint is placed following
the header. If an enroute waypoint or the dashes are selected, the new
waypoint will be placed before the selected item).
AFCS
b) Use the FMS Knob or the waypoint submenu to enter the identifier,
facility, or city name of the waypoint. The active flight plan is modified
as each waypoint is entered.
5) Repeat step number 4 to enter each additional enroute waypoint.
ADDING A WAYPOINT TO THE ACTIVE FLIGHT PLAN
1)
Press the FPL Key.
2)
Press the FMS Knob to activate the cursor (not required on the PFD).
3)
Select the point in the flight plan before which to add the new waypoint.
The new waypoint is placed directly in front of the highlighted waypoint.
4)
Turn the small FMS Knob to display the Waypoint Information Window.
(Turning it clockwise displays a blank Waypoint Information Window,
turning it counter-clockwise displays the Waypoint Information Window
with a waypoint selection submenu allowing selection of active flight plan,
nearest, recent, user, or airway waypoints).
5)
Enter the identifier, facility, or city name of the waypoint or select a
waypoint from the submenu of waypoints and press the ENT Key. The
active flight plan is modified as each waypoint is entered.
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
6) When all waypoints have been entered, press the FMS Knob to remove the
cursor (if required).
34
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Management
Flight
Instruments
CREATING AND ADDING USER WAYPOINTS TO THE ACTIVE FLIGHT PLAN
2)
Select the LD WPT Softkey; or press the MENU Key, select ‘Load Waypoint’,
and press the ENT Key. The user waypoint is created with a name of
USRxxx (using the next available in sequence) and is added to the end of
the active flight plan.
ADDING AN AIRWAY TO A FLIGHT PLAN
Press the FMS Knob to activate the cursor (not required on the PFD).
3)
Turn the large FMS Knob to highlight the waypoint after the desired airway
entry point. If this waypoint is not a valid airway entry point, a valid entry
point should be entered at this time.
4)
Turn the small FMS Knob one click clockwise and press the LD AIRWY
Softkey on the MFD, or press the MENU Key and select “Load Airway” on
the PFD. The Select Airway Page is displayed. The LD AIRWY Softkey or
the “Load Airway” menu item is available only when a valid airway entry
waypoint has been chosen (the waypoint ahead of the cursor position).
5)
Turn the FMS Knob to select the desired airway from the list, and press the
ENT Key. Low altitude airways are shown first in the list, followed by “all”
altitude airways, and then high altitude airways.
6)
Turn the FMS Knob to select the desired airway exit point from the list, and
press the ENT Key. ‘Load?’ is highlighted.
7)
Press the ENT Key. The system returns to editing the flight plan with the
new airway inserted.
AFCS
2)
Hazard
Avoidance
Press the FPL Key.
Flight
Management
1)
Nav/Com/
XPDR/Audio
Push the Joystick to activate the panning function on the Active Flight
Plan Page and pan to the map location of the desired user waypoint.
EIS
1)
Press the MENU Key, highlight ‘Collapse Airways’ or ‘Expand Airways’, and
press the ENT Key. The airways are collapsed/expanded.
Appendix
2)
Annun/Alerts
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the
‘Flight Plan’ Window (PFD).
Abnormal
Operation
1)
Additional
Features
COLLAPSE/EXPAND AIRWAYS IN THE ACTIVE FLIGHT PLAN
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
35
STORING AN ACTIVE FLIGHT PLAN FROM THE ACTIVE FLIGHT PLAN PAGE
OR THE ACTIVE FLIGHT PLAN WINDOW
1)
Press the MENU Key.
2)
Highlight ‘Store Flight Plan’.
3)
Press the ENT Key.
4)
With ‘OK’ highlighted, press the ENT Key. The flight plan is stored in
the next available position in the flight plan list on the ‘FPL - Flight Plan
Catalog’ Page.
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Flight Management
Press the FPL Key and turn the small FMS Knob to display the ‘FPL - Flight
Plan Catalog’ Page.
2)
Hazard
Avoidance
Press the FMS Knob to activate the cursor, and turn the FMS Knob to
highlight the desired flight plan.
3)
Press the Activate Softkey; or press the ENT Key twice; or press the
MENU Key, highlight ‘Activate Flight Plan’, and press the ENT Key. The
‘Activate stored flight plan?’ Window is displayed.
4)
With ‘OK’ highlighted, press the ENT Key. To cancel the request, press the
CLR Key, or highlight ‘Cancel’ and press the ENT Key.
INVERTING AND ACTIVATING A STORED FLIGHT PLAN ON THE MFD
1)
Press the FPL Key and turn the small FMS Knob to display the ‘FPL - Flight
Plan Catalog’ Page.
2)
Press the FMS Knob to activate the cursor, and turn the FMS Knob to
highlight the desired flight plan.
3)
Press the Invert Softkey; or press the MENU Key, highlight ‘Invert &
Activate FPL?’, and press the ENT Key. The ‘Invert and activate stored flight
plan?’ Window is displayed.
4)
With ‘OK’ highlighted, press the ENT Key. To cancel the request, press the
CLR Key, or highlight ‘Cancel’ and press the ENT Key.
IMPORT A FLIGHT PLAN FROM AN SD CARD
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
1)
AFCS
Flight
Management
ACTIVATING A STORED FLIGHT PLAN ON THE MFD
36
1)
Insert the SD card containing the flight plan in the top card slot on the
MFD.
2)
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page on the MFD.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Management
4)
Press the FMS Knob to activate the cursor.
5)
Turn either FMS Knob to highlight an empty or existing flight plan.
6)
Press the Import Softkey; or press the MENU Key, select “Import Flight
Plan”, and press the ENT Key.
EIS
Turn the small FMS Knob to select the ‘FPL - Flight Plan Catalog’ Page.
Flight
Instruments
3)
Or:
8)
Press the ENT Key to initiate the import.
9)
Press the ENT Key again to confirm the import.
AFCS
Turn the small FMS Knob to highlight the desired flight plan for importing.
Hazard
Avoidance
7)
Flight
Management
If an existing flight plan is selected, an “Overwrite existing flight plan?
OK or CANCEL” prompt is displayed. Press the ENT Key to choose to
overwrite the selected flight plan and see the list of available flight
plans on the SD card. If overwriting the existing flight plan is not
desired, select “CANCEL” using the FMS Knob, press the
ENT Key, select another flight plan slot, and press the Import Softkey
again.
Nav/Com/
XPDR/Audio
If an empty slot is selected, a list of the available flight plans on the SD
card will be displayed.
EXPORT A FLIGHT PLAN TO AN SD CARD
2)
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page on the MFD.
3)
Turn the small FMS Knob to select the ‘FPL - Flight Plan Catalog’ Page.
4)
Press the FMS Knob to activate the cursor.
5)
Turn the large FMS Knob to highlight the flight plan to be exported.
6)
Press the Export Softkey; or press the MENU Key, select “Export Flight
Plan”.
7)
If desired, change the name for the exported file by turning the large FMS
Knob to the left to highlight the name, then use the small and large FMS
knobs to enter the new name, and press the ENT Key.
8)
Press the ENT Key to initiate the export.
Abnormal
Operation
Insert the SD card into the top card slot on the MFD.
Index
37
Appendix
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Annun/Alerts
9) Press the ENT Key to confirm the export.
Flight plans can be transferred to or from a mobile device via the Flight Stream 510
Bluetooth wireless connection. Transfer of a flight plan to a mobile device is controlled
by the mobile device.
190-02199-01 Rev. A
Additional
Features
1)
PREVIEWING A FLIGHT PLAN TRANSFER FROM A WIRELESS CONNECTION
1)
When a flight plan transfer has been initiated from a mobile device, a
‘PENDING FLIGHT PLAN’ pop-up alert appears in the lower right corner of
the MFD, and an Connext annunciation appears to the right of the MFD
page name.
2)
Press the ENT Key to display the ‘FPL - Preview Flight Plan’ Page on the
MFD.
Or:
Press the Preview Softkey to display the ‘FPL - Preview Flight Plan’ Page
on the MFD.
IGNORING A FLIGHT PLAN TRANSFER FROM A WIRELESS CONNECTION
1)
When a flight plan transfer has been initiated from a mobile device, a
‘PENDING FLIGHT PLAN’ pop-up alert appears in the lower right corner of the
MFD, and an Connext annunciation appears to the right of the MFD page name.
2)
Press the CLR Key to remove the pop-up alert and ignore the pending flight
plan. The pending flight plan will still be available on the ‘FPL - Flight Plan
Catalog’ Page.
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Flight Management
Or:
STORING A PENDING FLIGHT PLAN
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
Press the Ignore Softkey to remove the pop-up alert and ignore the
pending flight plan. The pending flight plan will still be available on the
‘FPL - Flight Plan Catalog’ Page.
1)
Press the FPL Key.
2)
Turn the small FMS Knob to display the ‘FPL - Flight Plan Catalog’ Page.
3)
Press the FMS Knob to activate the cursor.
4)
Turn the FMS Knob to highlight the pending flight plan.
5)
Press the ENT Key to display the ‘FPL - Preview Flight Plan’ Page on the
MFD.
6)
Press the Store Softkey to store the flight plan. The pending flight plan is
stored and the pending annunciation is removed.
ACTIVATING A PENDING FLIGHT PLAN
1)
38
Press the FPL Key and turn the small FMS Knob to display the ‘FPL - Flight
Plan Catalog’ Page.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Management
Press the FMS Knob to activate the cursor, and turn the FMS Knob to
highlight the pending flight plan.
3)
Press the ENT Key to display the ‘FPL - Preview Flight Plan’ Page on the
MFD.
4)
Press the Activate Softkey. The ‘Activate Flight Plan?’ Window is
displayed.
5)
With ‘OK’ highlighted, press the ENT Key to activate the pending flight
plan. The pending flight plan becomes the active flight plan and is removed
from the ‘FPL - Flight Plan Catalog’ Page. To cancel the request, press the
CLR Key, or highlight ‘Cancel’ and press the ENT Key.
Flight
Instruments
2)
EIS
Flight
Management
2)
Turn the small FMS Knob to display the ‘FPL - Flight Plan Catalog’ Page.
3)
Press the FMS Knob to activate the cursor.
4)
Turn the FMS Knob to highlight the desired pending flight plan.
5)
Press the Delete Softkey. The ‘Delete Flight Plan XX?’ Window is
displayed.
AFCS
Press the FPL Key.
Hazard
Avoidance
1)
Nav/Com/
XPDR/Audio
DELETING A PENDING FLIGHT PLAN
Or:
6)
DELETING ALL PENDING FLIGHT PLANS
Press the FPL Key.
2)
Turn the small FMS Knob to display the ‘FPL - Flight Plan Catalog’ Page.
3)
Press the MENU Key.
4)
Turn the FMS Knob to highlight ‘Delete All Pending’.
5)
Press the ENT Key. A ‘Delete all pending flight plans?’ confirmation
window is displayed.
6)
With ‘OK’ highlighted, press the ENT Key to delete all pending flight plans.
To cancel the request, press the CLR Key, or highlight ‘Cancel’ and press
Annun/Alerts
1)
Appendix
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
39
Index
the ENT Key.
190-02199-01 Rev. A
Abnormal
Operation
With ‘OK’ highlighted, press the ENT Key to delete the pending flight plan.
The pending flight plan is removed from the ‘FPL - Flight Plan Catalog’
Page. To cancel the request, press the CLR Key, or highlight ‘Cancel’ and
press the ENT Key.
Additional
Features
Press the CLR Key. The ‘Delete Flight Plan XX?’ Window is displayed.
DELETING THE ACTIVE FLIGHT PLAN AND SUSPENDING NAVIGATION
1)
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or
the ‘Flight Plan’ Window (PFD).
2)
Press the MENU Key, highlight ‘Delete Flight Plan’, and press the ENT Key.
The ‘Delete all waypoints in flight plan?’ Window is displayed.
3)
With ‘OK’ highlighted, press the ENT Key to delete the active flight plan. To
cancel the request, press the CLR Key, or highlight ‘Cancel’ and press the
ENT Key.
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the
‘Flight Plan’ Window (PFD).
2)
Press the FMS Knob to activate the cursor (not required on the PFD) and
turn the large FMS Knob to highlight the waypoint to be deleted.
3)
Press the CLR Key. The ‘Remove XXXXX?’ Window is displayed.
4)
With ‘OK’ highlighted, press the ENT Key. To cancel the request, press the
CLR Key, or highlight ‘Cancel’ and press the ENT Key.
5)
Press the FMS Knob to remove the flashing cursor.
Flight
Management
1)
Hazard
Avoidance
DELETING AN INDIVIDUAL WAYPOINT FROM THE ACTIVE FLIGHT PLAN
AFCS
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Flight Management
1)
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the
‘Flight Plan’ Window (PFD).
2)
Press the FMS Knob to activate the cursor (not required on the PFD)
and turn the large FMS Knob to highlight the header of the airway to be
deleted.
3)
Press the CLR Key. The ‘Remove <airway name> from flight plan?’
Window is displayed.
4)
With ‘OK’ highlighted, press the ENT Key. To cancel the request, press the
CLR Key, or highlight ‘Cancel’ and press the ENT Key.
5)
Press the FMS Knob to remove the flashing cursor.
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
DELETING AN ENTIRE AIRWAY FROM THE ACTIVE FLIGHT PLAN
DELETING AN ENTIRE PROCEDURE FROM THE ACTIVE FLIGHT PLAN
Index
1)
40
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the
‘Flight Plan’ Window (PFD).
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Management
Press the FMS Knob to activate the cursor (not required on the PFD) and
turn the large FMS Knob to highlight the header of the procedure to be
deleted.
3)
Press the CLR Key. The ‘Remove <procedure name> from flight plan?’
Window is displayed.
4)
With ‘OK’ highlighted, press the ENT Key. To cancel the request, press the
CLR Key, or highlight ‘Cancel’ and press the ENT Key.
5)
Press the FMS Knob to remove the flashing cursor.
Flight
Instruments
2)
EIS
Nav/Com/
XPDR/Audio
ENTERING AN ALONG TRACK OFFSET DISTANCE
2)
Press the FMS Knob to activate the cursor (not required on the PFD) and
turn the large FMS Knob to highlight the waypoint for the along track
offset.
3)
Press the ATK OFS Softkey (MFD only); or press the MENU Key, highlight
‘Create ATK Offset WPT’, and press the ENT Key.
4)
Enter a positive or negative offset distance in the range of +/- 1 to 999 nm
(limited by leg distances).
5)
Press the ENT Key to create the offset waypoint.
6)
Press the FMS Knob to remove the flashing cursor.
Hazard
Avoidance
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the
‘Flight Plan’ Window (PFD).
Flight
Management
1)
AFCS
Additional
Features
ACTIVATING PARALLEL TRACK
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or
the ‘Flight Plan’ Window (PFD).
2)
Press the MENU Key, highlight ‘Parallel Track’, and press the ENT Key. The
‘Parallel Track’ Window is displayed with the ‘Direction’ field highlighted.
3)
Turn the small FMS Knob to select ‘LEFT’ or ‘RIGHT’ and press the ENT Key.
The ‘Distance’ field is highlighted.
4)
Turn the small FMS Knob to enter a distance from 1- 99 nm and press the
ENT Key. ‘Activate Parallel Track?’ is highlighted.
5)
Press the ENT Key to activate parallel track. Press the FMS Knob or the
CLR Key to cancel the parallel track activation.
Abnormal
Operation
1)
Annun/Alerts
Appendix
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
41
CANCELLING PARALLEL TRACK
1)
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the
‘Flight Plan’ Window (PFD).
2)
Press the MENU Key, highlight ‘Parallel Track’, and press the ENT Key.
The ‘Parallel Track’ Window is displayed with ‘Cancel Parallel Track?’
highlighted.
3)
Press the ENT Key.
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the
‘Flight Plan’ Window (PFD).
2)
Press the FMS Knob to activate the cursor (not required on the PFD) and
turn the large FMS Knob to highlight the destination waypoint for the
desired leg.
3)
Press the ACT Leg Softkey (MFD only); or press the MENU Key, highlight
‘Activate Leg’, and press the ENT Key. A confirmation window is displayed
with ‘Activate’ highlighted.
4)
Press the ENT Key to activate the flight plan leg. To cancel, press the CLR
Key, or highlight ‘Cancel’ and press the ENT Key.
5)
Press the FMS Knob to remove the flashing cursor.
INVERTING THE ACTIVE FLIGHT PLAN
1)
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the
‘Flight Plan’ Window (PFD).
2)
Press the MENU Key, highlight ‘Invert Flight Plan’, and press the ENT Key.
An ‘Invert active flight plan?’ confirmation window is displayed.
3)
Select ‘OK’.
4)
Press the ENT Key to invert and activate the active flight plan. To cancel,
press the CLR Key, or highlight ‘Cancel’ and press the ENT Key.
CHANGING THE FLIGHT PLAN VIEW
1) Press the FPL Key on the MFD to display the ‘FPL - Active Flight Plan’ Page.
2) Press the View Softkey to display the Wide, Narrow, Leg-Leg, and CUM
Softkeys.
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
Flight
Management
1)
Hazard
Avoidance
ACTIVATING A FLIGHT PLAN LEG
AFCS
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Flight Management
3) Press the CUM Softkey to view cumulative waypoint distance, or press the
Leg-Leg Softkey to view leg-to-leg waypoint distance.
42
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Management
Flight
Instruments
4) Press the Wide Softkey to display the wide view, or press the Narrow
Softkey to display the narrow view.
5) Press the Back Softkey to return to the top level active flight plan softkeys.
1) Press the FPL Key on the MFD to display the ‘FPL - Active Flight Plan’ Page.
Nav/Com/
XPDR/Audio
2) Press the Charts Softkey. Split screen mode is now enabled showing the
Charts page alongside the Active Flight Plan Page, and Charts page is
bordered by a cyan box indicating it is the active display pane.
Flight
Management
3) To quickly view the chart corresponding to the active flight plan leg, press
the AUTO Softkey.
DISPLAYING THE FLIGHT PLAN MAP ON THE ACTIVE FLIGHT PLAN PAGE IN
SPLIT MODE
3) Move the Joystick to select the Active Flight Plan page as the active display
pane.
Abnormal
Operation
To removed the Flight Plan Map, press the MENU Key and select ‘Hide
Flight Plan Map’. Press the ENT Key.
CREATING A USER-DEFINED HOLD AT AN ACTIVE FLIGHT PLAN WAYPOINT
Press the FMS Knob to activate the cursor (not required on the PFD) and
turn the large FMS Knob to highlight the waypoint for the hold.
3)
Press the MENU Key, highlight ‘Hold At Waypoint’, and press the ENT Key.
The ‘Hold at’ Window appears with the ‘Course’ Field highlighted.
4)
Use the FMS Knobs to edit the course, and press the ENT Key.
5)
Use the small FMS Knob to select ‘Inbound’ or ‘Outbound’ course direction,
and press the ENT Key.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
43
Index
2)
Appendix
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the
‘Flight Plan’ Window (PFD).
Annun/Alerts
1)
190-02199-01 Rev. A
Additional
Features
4) Press the MENU Key. ‘Show Flight Plan Map’ is highlighted. Press the ENT
Key.
AFCS
2) Press the Charts Softkey. Split screen mode is now enabled showing the
Charts page alongside the Active Flight Plan Page, and Charts page is
bordered by a cyan box indicating it is the active display pane.
Hazard
Avoidance
1) Press the FPL Key on the MFD to display the ‘FPL - Active Flight Plan’ Page.
5)
EIS
VIEWING CHARTS AND ACTIVE FLIGHT PLAN PAGE IN SPLIT SCREEN MODE
6)
Use the small FMS Knob to select ‘Time’ or ‘Distance’ length mode, and
press the ENT Key.
7)
Use the FMS Knobs to edit the length, and press the ENT Key.
8)
Use the small FMS Knob to select ‘Right’ or ‘Left’ turn direction, and press
the ENT Key.
9)
Use the FMS Knobs to edit the Expect Further Clearance Time (EFC Time),
and press the ENT Key.
10) Press the ENT Key while ‘Load?’ is highlighted to insert the hold into the
flight plan.
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the
‘Flight Plan’ Window (PFD).
2)
Press the MENU Key, highlight ‘Hold At Present Position’, and press the
ENT Key. The ‘Hold at’ Window appears with the ‘Course’ field highlighted.
3)
If desired, use the FMS Knobs to edit the course, and press the ENT Key.
4)
Use the small FMS Knob to select ‘Inbound’ or ‘Outbound’ course direction,
and press the ENT Key.
5)
Use the small FMS Knob to select ‘Time’ or ‘Distance’ length mode, and
press the ENT Key.
6)
Use the FMS Knobs to edit the length, and press the ENT Key.
7)
Use the small FMS Knob to select ‘Right’ or ‘Left’ turn direction, and press
the ENT Key.
8)
Use the FMS Knobs to edit the Expect Further Clearance Time (EFC Time),
and press the ENT Key.
9)
Press the ENT Key while ‘Activate?’ is highlighted to create an Offroute
Direct-to hold waypoint at the aircraft present position and activate the
hold.
CREATING A USER-DEFINED HOLD AT A DIRECT-TO WAYPOINT
Index
Appendix
Annun/Alerts
AFCS
Hazard
Avoidance
1)
Additional
Features
CREATING A USER-DEFINED HOLD AT THE AIRCRAFT PRESENT POSITION
Abnormal
Operation
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Flight Management
44
1)
Press a Direct-to Key and set up the direct-to waypoint as desired, but
select ‘Hold?’ instead of ‘Activate?’ when finished (MFD or PFD).
2)
Use the FMS Knobs to edit the course, and press the ENT Key.
3)
Use the small FMS Knob to select ‘Inbound’ or ‘Outbound’ course direction,
and press the ENT Key.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Management
Use the small FMS Knob to select ‘Time’ or ‘Distance’ length mode, and
press the ENT Key.
5)
Use the FMS Knobs to edit the length, and press the ENT Key.
6)
Use the small FMS Knob to select ‘Right’ or ‘Left’ turn direction, and press
the ENT Key.
7)
Use the FMS Knobs to edit the Expect Further Clearance Time (EFC TIME),
and press the ENT Key.
8)
Press the ENT Key while ‘Activate?’ is highlighted to activate the direct-to
with the user-defined hold defined at the direct-to waypoint. (If the directto waypoint is part of the active flight plan, the HOLD is inserted into the
active flight plan. If the direct-to waypoint is not part of the active flight
plan, an off-route direct-to hold is created.)
Flight
Instruments
4)
EIS
Nav/Com/
XPDR/Audio
Flight
Management
EXITING A USER-DEFINED HOLD INSERTED INTO THE ACTIVE FLIGHT PLAN
Hazard
Avoidance
Press the SUSP Softkey. The system will provide guidance to follow the
holding pattern to the inbound course and resume automatic waypoint
sequencing.
AFCS
REMOVING A USER-DEFINED HOLD INSERTED INTO THE ACTIVE FLIGHT
PLAN
2)
Press the FMS Knob to activate the cursor (not required on the PFD) and
turn the large FMS Knob to highlight the HOLD waypoint.
3)
Press the CLR Key. A ‘Remove Holding Pattern?’ confirmation window is
displayed.
4)
Select ‘OK’ and press the ENT Key. The holding pattern is removed from
the active flight plan. Select ‘Cancel’ and press the ENT Key to cancel the
removal of the holding pattern.
Abnormal
Operation
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the
‘Flight Plan’ Window (PFD).
Annun/Alerts
2)
Press the MENU Key to display the ‘Page Menu’ Window with the cursor
on the ‘Cancel Direct-To NAV’ selection.
3)
Press the ENT Key. The holding pattern is removed.
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
Press a Direct To Key to display the ‘Direct To’ Window (PFD or MFD).
Appendix
REMOVING A USER-DEFINED HOLD AT AN OFF-ROUTE DIRECT-TO
1)
Additional
Features
1)
45
VERTICAL NAVIGATION
ENABLING/DISABLING VNV GUIDANCE
1)
Press the FPL Key on the MFD to display the ‘FPL- Active Flight Plan’ Page.
2)
Press the ENBL VNV Softkey; or press the MENU Key, highlight ‘Enable
VNV’, and press the ENT Key. Vertical navigation is enabled, and vertical
guidance begins with the waypoint shown in the ‘Active VNV Profile’ Box
(defaults first waypoint in the active flight plan with an altitude enabled for
vertical navigation (e.g., FALUR)).
3)
To disable VNV guidance, press the Cncl VNV Softkey; or press the MENU
Key, highlight ‘Cancel VNV’, and press the ENT Key. Vertical navigation is
disabled.
ACTIVATING A VERTICAL NAVIGATION DIRECT-TO
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Flight Management
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page on the MFD.
2)
Additional
Features
Press the FMS Knob to activate the cursor and turn the FMS Knob to
highlight the desired waypoint.
3)
Press the VNV Direct-To Softkey; or press the MENU Key, highlight
‘VNV Direct-To’, and press the ENT Key. An ‘Activate vertical Direct-to to:
NNNNNFT at XXXXXX?’ confirmation window is displayed.
4)
Press the ENT Key. Vertical guidance begins to the altitude constraint for
the selected waypoint.
5)
Press the FMS Knob to remove the flashing cursor.
MODIFYING THE VS TGT AND FPA
Index
Appendix
Annun/Alerts
1)
Abnormal
Operation
AFCS
NOTE: The selected waypoint must have a designated altitude constraint
(cyan number) to be used. If not, the first waypoint in the flight plan with a
designated altitude constraint is selected.
46
1)
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page on the MFD.
2)
Press the VNV Prof Softkey; or press the MENU Key, highlight ‘Select VNV
Profile Window’, and press the ENT Key. The cursor is now located in the
‘Active VNV Profile’ Box.
3)
Turn the FMS Knobs as needed to edit the values.
4)
Press the FMS Knob to remove the flashing cursor.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Management
Hazard
Avoidance
Cyan Text
Additional
Features
Altitude Constraint Examples
5OOOFT
Cross AT or ABOVE
5,000 ft
Abnormal
Operation
23OOFT
3OOOFT
Temperature Compensated
Annun/Alerts
Cross AT or BELOW
3,000 ft
AFCS
White Text
with Altitude
Restriction Bar
Cross AT 2,300 ft
Flight
Management
Cyan Text with
Pencil Icon
Nav/Com/
XPDR/Audio
White Text
EIS
Displayed Text
Examples
Flight
Instruments
ALTITUDE CONSTRAINTS
The system can use altitude constraints associated with lateral waypoints to give
guidance for vertical navigation. These altitudes are, depending on the specific instance, manually entered or retrieved from the published altitudes in the navigation
database.
Appendix
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
47
Flight Management
Cyan Text
5OOOFT
5OOOFT
Altitude calculated by the system estimating
the altitude of the aircraft as it passes over the
navigation point. No white line above or below to
indicate a potential constraint.
Altitude is designated for use in
determining vertical guidance. A pencil
icon indicates manual designation or
manual data entry.
5OOOFT
5OOOFT
Altitude retrieved from the navigation database.
White line above or below indicates the type of
constraint, as shown in the preceding figure.
These altitudes are provided as a reference, and
are not designated to be used in determining
vertical guidance.
The system cannot use this altitude in
determining vertical guidance because of
an invalid constraint condition.
Altitudes associated with arrival and approach procedures are not “auto-designated”. This means the system does not automatically use the altitudes loaded with the
arrival or approach for giving vertical speed and deviation guidance. Note that these
altitudes are displayed as white text up to, but not including, the FAF. The FAF is always a “reference only” altitude and cannot be designated, unless the selected approach
does not provide vertical guidance. In this case, the FAF altitude can be designated.
MANUALLY DESIGNATING A WAYPOINT ALTITUDE TO BE USED FOR
VERTICAL GUIDANCE
1)
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page on the MFD.
2)
Press the FMS Knob, and turn to highlight the desired waypoint altitude.
3)
Turn the small FMS Knob to enter editing mode.
4)
Press the ENT Key. The altitude is now shown in cyan, indicating it is
usable for vertical guidance.
Appendix
MANUALLY DESIGNATING A PROCEDURE WAYPOINT ALTITUDE TO BE USED
FOR VERTICAL GUIDANCE
1)
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page on the MFD.
2)
Press the FMS Knob, and highlight the desired waypoint altitude. Turn the
small FMS Knob to enter editing mode. .
Index
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
White Text
3)
Press the ENT Key. The altitude is now shown in cyan, indicating it is
usable for vertical guidance.
48
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Management
2)
Press the FMS Knob, and turn to highlight the desired waypoint altitude
constraint.
3)
Enter an altitude constraint value using the FMS Knobs. To enter altitudes
as a flight level, turn the small FMS Knob counter-clockwise past zero
or clockwise past 9 on the first character, and the system automatically
changes to show units of Flight Level. Turn the large FMS Knob clockwise
to highlight the first zero and enter the three digit flight level.
Press the CLR Key. A ‘Remove VNV altitude?’ confirmation window is
displayed.
4)
Select ‘OK’ and press the ENT Key.
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
3)
Appendix
Press the FMS Knob, and turn to highlight the desired waypoint altitude
constraint.
Annun/Alerts
2)
Abnormal
Operation
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page on the MFD.
Additional
Features
1)
AFCS
DELETING AN ALTITUDE CONSTRAINT PROVIDED BY THE NAVIGATION
DATABASE
Hazard
Avoidance
Press the ENT Key to accept the altitude constraint; if the selected
waypoint is an airport, an additional choice is displayed. Turn the small
FMS Knob to choose ‘MSL’ or ‘AGL’, and press the ENT Key to accept the
altitude.
Altitudes that have been designated for use in vertical guidance can be “undesignated” using the CLR Key. The altitude is now displayed only as a reference. It
is not used to give vertical guidance. Other displayed altitudes may change due to
re-calculations or be rendered invalid as a result of manually changing an altitude to a
non-designated altitude.
An altitude constraint is invalid if:
• Meeting the constraint requires the aircraft to climb
• Meeting the constraint requires the maximum flight path angle or maximum
vertical speed to be exceeded
• The altitude constraint results in a TOD behind the aircraft present position
• The constraint is within a leg type for which altitude constraints are not supported
• The altitude constraint is added to the FAF of an approach that provides vertical guidance (i.e., ILS or GPS SBAS approach)
• The altitude constraint is added to a waypoint past the FAF
Flight
Management
4)
Nav/Com/
XPDR/Audio
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page on the MFD.
EIS
1)
Flight
Instruments
ENTERING/MODIFYING AN ALTITUDE CONSTRAINT
49
DELETING AN ALTITUDE CONSTRAINT THAT HAS BEEN MANUALLY ENTERED
AFCS
Annun/Alerts
Abnormal
Operation
Additional
Features
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page on the MFD.
2)
Press the FMS Knob, and turn to highlight the desired waypoint altitude
constraint.
3)
Press the CLR Key. A ‘Remove or Revert to published VNV altitude of
nnnnnFT?’ confirmation window is displayed.
4)
Select ‘Remove’ and press the ENT Key. The manually entered altitude is
deleted (it is replaced by a system calculated altitude, if available).
1)
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page on the MFD.
2)
Press the FMS Knob, and turn to highlight the desired waypoint altitude
constraint.
3)
Press the CLR Key. A ‘Remove or Revert to published VNV altitude of
nnnnnFT?’ confirmation window is displayed.
4)
Select ‘Revert’ and press the ENT Key. The altitude is changed to the
navigation database value.
5)
Press the FMS Knob to remove the flashing cursor.
MODIFYING A SYSTEM CALCULATED ALTITUDE CONSTRAINT
1)
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page on the MFD.
2)
Press the FMS Knob, and turn to highlight the desired waypoint altitude
constraint.
3)
Press the CLR Key. An ‘Edit or Revert to published VNV altitude of
nnnnnFT?’ confirmation window is displayed.
4)
Select ‘Edit’ and press the ENT Key.
5)
Edit the value using the FMS Knobs, and press the ENT Key.
6)
Press the FMS Knob to remove the flashing cursor.
ENABLING THE VERTICAL SITUATION DISPLAY
Index
Appendix
1)
REVERTING A MANUALLY ENTERED ALTITUDE CONSTRAINT BACK TO THE
NAVIGATION DATABASE VALUE
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Flight Management
50
1)
Select the ‘Map - Navigation Map’ Page.
2)
Press the Map Opt Softkey.
3)
Press the Inset Softkey.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Management
Press the VSD Softkey to enable the Vertical Situation Display.
5)
Press the VSD mode softkey to choose between Auto, FPL, or TRK.
Flight
Instruments
4)
DISABLING THE VERTICAL SITUATION DISPLAY
2)
Press the Map Opt Softkey.
3)
Press the Off Softkey.
Nav/Com/
XPDR/Audio
Select the ‘Map - Navigation Map’ Page.
EIS
1)
PROCEDURES
1)
From the ‘WPT - Airport Information’ Page (first page in the WPT group):
Or:
Or:
To select another airport, press the FMS Knob to activate the cursor, enter
an identifier/facility name/city, and press the ENT Key.
3)
Turn the large FMS Knob to highlight the procedure. The procedure is
previewed on the map.
4)
Turn the small FMS Knob to view the available procedures. Press the ENT
Key to select the procedure. The cursor moves to the next box (runway or
transition). The procedure is previewed on the map.
5)
Turn the small FMS Knob to view the available runway or transition. Press
the ENT Key to select the runway or transition. The cursor moves to the
next box (if available). The procedure is previewed on the map.
Appendix
6)
Turn the small FMS Knob to view the available runway or transition. Press
the ENT Key to select the runway or transition. The cursor moves to the
‘Sequence’ Box or the ‘Minimums’ Box. The procedure is previewed on the
map.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
51
Index
190-02199-01 Rev. A
Abnormal
Operation
2)
Annun/Alerts
Additional
Features
Press the APR Softkey. The ‘WPT - Approach Information’ Page is
displayed, defaulting to the airport displayed on the Airport information
Page.
AFCS
Press the STAR Softkey. The ‘WPT - Arrival Information’ Page is displayed,
defaulting to the airport displayed on the Airport information Page.
Hazard
Avoidance
Press the DP Softkey. The ‘WPT - Departure Information’ Page is displayed,
defaulting to the airport displayed on the Airport information Page.
Flight
Management
VIEWING AVAILABLE PROCEDURES AT AN AIRPORT
Flight Management
EIS
Flight
Instruments
7)
Press the Info 1 Softkey or the Info 2 Softkey to return to the ‘WPT Airport Information’ Page.
LOADING A PROCEDURE INTO THE ACTIVE FLIGHT PLAN FROM THE
<PROCEDURE> INFORMATION PAGE
1)
From the ‘WPT- Airport Information’ Page (first page in the WPT group):
Nav/Com/
XPDR/Audio
Press the DP Softkey. The ‘WPT - Departure Information’ Page is displayed,
defaulting to the airport displayed on the Airport information Page.
Or:
Flight
Management
Press the APR Softkey. The ‘WPT - Approach Information’ Page is
displayed, defaulting to the airport displayed on the Airport information
Page.
AFCS
Or:
Hazard
Avoidance
Press the STAR Softkey. The ‘WPT - Arrival Information’ Page is displayed,
defaulting to the airport displayed on the Airport information Page.
2)
To select another airport, press the FMS Knob to activate the cursor, enter
an identifier/facility name/city, and press the ENT Key.
3)
Select a different procedure, if desired.
Additional
Features
a) Turn the large FMS Knob to highlight the procedure. The procedure is
previewed on the map.
Abnormal
Operation
b) Turn the small FMS Knob to view the available procedures. Press the
ENT Key to select the procedure. The cursor moves to the next box
(runway or transition). The procedure is previewed on the map.
Annun/Alerts
c) Turn the small FMS Knob to view the available runway or transition.
Press the ENT Key to select the runway or transition. The cursor moves
to the next box (if available). The procedure is previewed on the map.
4)
Press the MENU Key to display the <Procedure> Information Page Menu.
5)
Turn the FMS Knob to highlight ‘Load <procedure>’.
6)
Press the ENT Key to load the procedure into the active flight plan.
Index
Appendix
d) Turn the small FMS Knob to view the available transitions. Press the
ENT Key to select the transition. The cursor moves to the ‘Sequence’
Box or the ‘Minimums’ Box. The procedure is previewed on the map.
52
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Management
Flight
Instruments
LOADING A DEPARTURE INTO THE ACTIVE FLIGHT PLAN USING THE PROC
KEY
Press the PROC Key. The ‘Procedures’ Window is displayed.
2)
Highlight ‘Select Departure’.
3)
Press the ENT Key. The ‘PROC - Departure Loading’ Page is displayed.
4)
Use the FMS Knob to select an airport, if necessary, and press the ENT Key.
5)
Select a departure from the list and press the ENT Key.
6)
Select a runway (if required) and press the ENT Key.
7)
Select a transition (if required) and press the ENT Key. ‘Load?’ is
highlighted.
8)
Press the ENT Key to load the departure procedure.
EIS
1)
Nav/Com/
XPDR/Audio
Flight
Management
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the
‘Flight Plan’ Window (PFD).
2)
Press the MENU Key, and highlight ‘Remove Departure’.
3)
Press the ENT Key. A confirmation window is displayed listing the
departure procedure.
4)
With ‘OK’ highlighted, press the ENT Key. To cancel the removal request, highlight
‘Cancel’ and press the ENT Key.
AFCS
1)
Hazard
Avoidance
REMOVING A DEPARTURE PROCEDURE FROM THE ACTIVE FLIGHT PLAN
Additional
Features
2)
Highlight ‘Select Arrival’.
3)
Press the ENT Key. The ‘PROC - Arrival Loading’ Page is displayed.
4)
Use the FMS Knob to select an airport, if necessary, and press the ENT Key.
5)
Select an arrival from the list and press the ENT Key.
6)
Select a transition (if required) and press the ENT Key.
7)
Select a runway (if required) and press the ENT Key. ‘Load?’ is highlighted.
8)
Press the ENT Key to load the arrival procedure.
Appendix
Press the PROC Key. The ‘Procedures’ Window is displayed.
Annun/Alerts
1)
Abnormal
Operation
LOADING AN ARRIVAL INTO THE ACTIVE FLIGHT PLAN USING THE PROC KEY
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
53
REMOVING AN ARRIVAL FROM THE ACTIVE FLIGHT PLAN
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Flight Management
1)
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the
‘Flight Plan’ Window (PFD).
2)
Press the MENU Key, and highlight ‘Remove Arrival’.
3)
Press the ENT Key. A confirmation window is displayed listing the arrival
procedure.
4)
With ‘OK’ highlighted, press the ENT Key. To cancel the removal request, highlight
‘Cancel’ and press the ENT Key.
HSI Annunciation
LNAV
LNAV+V
Description
RNAV GPS approach using published LNAV minima
RNAV GPS approach using published LNAV minima. Advisory vertical
guidance is provided
L/VNAV
RNAV GPS approach using published LNAV/VNAV minima (downgrades to
(available only if SBAS available) LNAV if SBAS unavailable)
LP
RNAV GPS approach using published LP minima (downgrades to LNAV if
(available only if SBAS available) SBAS unavailable)
LP+V
RNAV GPS approach using published LP minima
(available only if SBAS available) Advisory vertical guidance is provided (downgrades to LNAV if SBAS
unavailable)
LPV
RNAV GPS approach using published LPV minima (downgrades to LNAV if
(available only if SBAS available) SBAS unavailable)
Annun/Alerts
LOADING AN APPROACH INTO THE ACTIVE FLIGHT PLAN USING THE PROC
KEY
1)
Press the PROC Key. The ‘Procedures’ Window is displayed.
2)
Highlight ‘Select Approach’, and press the ENT Key. The ‘PROC - Approach
Loading’ Page is displayed.
Appendix
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
APPROACH SERVICE LEVELS
3)
Select the airport and approach:
a) Use the FMS Knob to select an airport, if necessary, and press the ENT
Key.
Index
b) Select an approach from the list and press the ENT Key.
Or:
54
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Management
Select a transition (if required) and press the ENT Key.
5)
Minimums
b) If ‘TEMP COMP’ was selected, the cursor moves to the temperature
field. Turn the small FMS Knob to select the temperature, and press the
ENT Key.
Hazard
Avoidance
Or:
To skip setting minimums, press the ENT Key.
6)
2)
Press the FMS Knob, then turn the large FMS Knob to highlight the desired nearest airport. The
airport is previewed on the map.
3)
Press the APR Softkey; or press the MENU Key, highlight ‘Select Approach
Window’, and press the ENT Key.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
55
Index
Select the ‘NRST - Nearest Airports’ Page.
Appendix
1)
Annun/Alerts
LOADING AN APPROACH INTO THE ACTIVE FLIGHT PLAN FROM THE ‘NRST NEAREST AIRPORTS’ PAGE
Abnormal
Operation
NOTE: When GPS is not approved for the selected final approach course, the
message ‘NOT APPROVED FOR GPS’ is displayed. GPS provides guidance to
the approach, but the CDI must to be switched to a NAV receiver to fly the
final course of the approach.
Additional
Features
NOTE: If there is no arrival procedure in the active flight plan, loading an
approach after a destination airport has already been entered will result in a
duplicate destination airport waypoint being added to the end of the enroute
segment.
AFCS
Press the ENT Key with ‘Load?’ highlighted to load the approach
procedure; or turn the large FMS Knob to highlight ‘Activate’ and press the
ENT Key to load and activate the approach procedure.
190-02199-01 Rev. A
Flight
Management
a) To set ‘Minimums’, turn the small FMS Knob to select ‘BARO’, ‘TEMP
COMP’ or ‘RAD ALT’, and press the ENT Key. Turn the small FMS Knob
to select the altitude, and press the ENT Key.
Nav/Com/
XPDR/Audio
4)
EIS
b) Use the FMS Knob to enter the approach channel number, and press
the ENT Key to accept the approach channel number. The airport and
approach are selected.
Flight
Instruments
a) If necessary, push the FMS Knob to exit the approach list, and use the
large FMS Knob to move the cursor to the ‘Approach Channel’ Field.
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Flight Management
4)
Turn the FMS Knob to highlight the desired approach.
5)
Press the LD APR Softkey; or press the MENU Key, highlight ‘Load
Approach’, and press the ENT Key. The ‘PROC - Approach Loading’ Page is
displayed with the transitions field highlighted.
6)
Turn the FMS Knob to highlight the desired transition, and press the ENT
Key.
7)
Minimums
Flight
Management
a) To set ‘Minimums’, turn the small FMS Knob to select ‘BARO’, ‘TEMP
COMP’, or ‘RAD ALT’ and press the ENT Key. Turn the small FMS Knob
to select the altitude, and press the ENT Key.
b) If ‘TEMP COMP’ was selected, the cursor moves to the temperature
field. Turn the small FMS Knob to select the temperature, and press the
ENT Key.
Hazard
Avoidance
Or:
To skip setting minimums, press the ENT Key. The ‘LOAD?’ Field is
highlighted.
Appendix
Index
Press the ENT Key with ‘LOAD?’ highlighted to load the approach
procedure; or turn the large FMS Knob to highlight ‘ACTIVATE’ and press
the ENT Key to load and activate the approach procedure. The system
continues navigating the current flight plan until the approach is activated.
When GPS is not approved for the selected final approach course, the
message ‘NOT APPROVED FOR GPS’ is displayed. GPS provides guidance to
the approach, but the CDI must to be switched to a NAV receiver to fly the
final course of the approach.
ACTIVATING A PREVIOUSLY LOADED APPROACH
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
8)
1)
Press the PROC Key. The ‘Procedures Window’ is displayed with ‘Activate
Approach’ highlighted.
2)
Press the ENT Key to activate the approach.
ACTIVATING A PREVIOUSLY LOADED APPROACH WITH VECTORS TO FINAL
1)
Press the PROC Key to display the ‘Procedures’ Window.
2)
Highlight ‘Activate Vector-to-Final’ and press the ENT Key.
REMOVING AN APPROACH FROM THE ACTIVE FLIGHT PLAN
1)
56
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the
‘Flight Plan’ Window (PFD).
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Management
Press the MENU Key, and highlight ‘Remove Approach’.
3)
Press the ENT Key. A confirmation window is displayed listing the
approach procedure.
4)
With ‘OK’ highlighted, press the ENT Key. To cancel the removal, highlight
‘Cancel’ and press the ENT Key.
Flight
Instruments
2)
EIS
ACTIVATING A MISSED APPROACH IN THE ACTIVE FLIGHT PLAN
2)
Turn the FMS Knob to highlight ‘Activate Missed Approach’.
3)
Press the ENT Key. The aircraft automatically sequences to the MAHP.
Flight
Management
Press the PROC Key.
Nav/Com/
XPDR/Audio
1)
Or:
Fly past the MAP, and press the SUSP Softkey on the PFD.
Hazard
Avoidance
Or:
Press the Go-Around Button.
ACTIVATING TEMPERATURE COMPENSATED ALTITUDE
From the ‘FPL - Active Flight Plan’ Page, press the MENU Key. The ‘Page
Menu’ Window is displayed.
2)
Turn the FMS Knob to highlight ‘Temperature Compensation’.
3)
Press the ENT Key. The ‘Temperature Compensation’ Window is displayed.
4)
Use the small FMS Knob to select the temperature at the <airport>. The
AFCS
1)
Additional
Features
compensated altitude is computed as the temperature is selected.
Press the ENT Key. ‘Activate Compensation?’ is highlighted.
6)
Press the ENT Key. The compensated altitudes for the approach are
Abnormal
Operation
5)
Annun/Alerts
shown in the flight plan.
CANCELLING TEMPERATURE COMPENSATED ALTITUDE
From the ‘FPL - Active Flight Plan’ Page, press the MENU Key. The ‘Page
Menu’ Window is displayed.
2)
Turn the FMS Knob to highlight ‘Temperature Compensation’.
3)
Press the ENT Key. The ‘Temperature Compensation’ Window is displayed.
4)
Press the ENT Key. ‘Cancel Compensation?’ is highlighted.
5)
Press the ENT Key. The temperature compensated altitude at the FAF
Appendix
1)
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
57
Index
is cancelled.
WEIGHT PLANNING
ENTERING BASIC EMPTY WEIGHT
1)
Press the Empty WT Softkey; or press the MENU Key, highlight ‘Set Basic
Empty Weight’, and press the ENT Key to select the ‘Basic Empty Weight’
Field.
2)
Turn the small FMS Knob to enter the basic empty weight.
3)
Press the ENT Key to confirm the entry.
4)
Press the FMS Knob to remove the flashing cursor.
ENTERING A PILOT AND STORES WEIGHT
Press the FMS Knob to activate the cursor and highlight the ‘Pilot & Stores’
Field.
2)
Turn the small FMS Knob to enter the pilot and stores weight.
3)
Press the ENT Key to confirm the entry.
4)
Press the FMS Knob to remove the flashing cursor.
1)
Press the FMS Knob to activate the cursor and highlight the ‘Passengers #’
Field.
2)
Turn the small FMS Knob to enter the number of passengers.
3)
Press the ENT Key to confirm the entry.
4)
Press the FMS Knob to remove the flashing cursor.
ENTERING THE AVERAGE PASSENGER WEIGHT
Appendix
Annun/Alerts
Abnormal
Operation
1)
ENTERING THE NUMBER OF PASSENGERS
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Flight Management
1)
Press the FMS Knob to activate the cursor and highlight the passenger
weight (‘at’) field.
2)
Turn the small FMS Knob to enter the average passenger weight.
3)
Press the ENT Key to confirm the entry.
4)
Press the FMS Knob to remove the flashing cursor.
Index
The total weight of passengers is calculated by multiplying the number of
passengers by the average passenger weight.
58
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Management
Press the FMS Knob to activate the cursor and highlight the ‘Cargo’ Field.
2)
Turn the small FMS Knob to enter the cargo weight.
3)
Press the ENT Key to confirm the entry.
4)
Press the FMS Knob to remove the flashing cursor.
EIS
1)
ENTERING A FUEL ON BOARD WEIGHT
2)
Turn the small FMS Knob to enter the fuel on board.
3)
Press the ENT Key to confirm the entry.
4)
Press the FMS Knob to remove the flashing cursor.
Hazard
Avoidance
Press the FMS Knob to activate the cursor and highlight the ‘Fuel on Board’
Field.
Press the FOB Sync Softkey on the ‘Aux - Weight Planning’ Page. The
actual measured fuel on board is displayed in the ‘FUEL ON BOARD’ Field.
2)
Turn the small FMS Knob to enter the fuel reserves amount.
3)
Press the ENT Key to confirm the entry.
4)
Press the FMS Knob to remove the flashing cursor
Annun/Alerts
Press the FMS Knob to activate the cursor and highlight the ‘Fuel Reserves’
Field.
Abnormal
Operation
1)
Additional
Features
ENTERING FUEL RESERVE
AFCS
SYNCHRONIZING THE FUEL ON BOARD WITH THE ACTUAL MEASURED FUEL
ON BOARD
TRIP PLANNING
59
Index
From the ‘Aux - Trip Planning’ Page, press the Auto Softkey or the Manual
Softkey; or press the MENU Key, highlight ‘Auto Mode’ or ‘Manual Mode’,
and press the ENT Key.
Appendix
SELECTING AUTOMATIC OR MANUAL PAGE MODE
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Flight
Management
1)
Nav/Com/
XPDR/Audio
The ‘Zero Fuel Weight’ is calculated by adding the basic empty, pilot and
stores, passenger, and cargo weights.
190-02199-01 Rev. A
Flight
Instruments
ENTERING THE CARGO WEIGHT
SELECTING FLIGHT PLAN OR WAYPOINT MODE
From the ‘Aux - Trip Planning’ Page, press the FPL Softkey or the WPTs
Softkey; or press the MENU Key, highlight ‘Flight Plan Mode’ or ‘Waypoints
Mode’, and press the ENT Key.
SELECTING A FLIGHT PLAN AND LEG FOR TRIP STATISTICS
1)
From the ‘Aux - Trip Planning’ Page, press the FMS Knob to activate the
cursor in the ‘FPL’ Field.
2)
Turn the small FMS Knob to select the desired flight plan number.
3)
Turn the large FMS Knob to highlight ‘CUM’ or ‘REM’. The statistics for
each leg can be viewed by turning the small FMS Knob to select the
desired leg. The Trip Planning map also displays the selected data.
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Flight Management
Additional
Features
AFCS
Hazard
Avoidance
SELECTING WAYPOINTS FOR WAYPOINT MODE
1)
From the ‘Aux - Trip Planning’ Page, press the WPTs Softkey; or press the
MENU Key, highlight ‘Waypoints Mode’, and press the ENT Key. The cursor
is positioned in the waypoint field directly below the ‘FPL’ Field.
2)
Turn the FMS knobs to select the desired waypoint (or press the MENU
Key and highlight ‘Set WPT to Present Position’ if that is what is desired),
and press the ENT Key. The cursor moves to the second waypoint field.
3)
Turn the FMS knobs to select the desired waypoint, and press the ENT Key.
The statistics for the selected leg are displayed.
Abnormal
Operation
From the ‘Aux - Trip Planning’ Page, press the Manual Softkey or select
‘Manual Mode’ from the ‘Page Menu’ Window, and press the ENT Key. The
cursor may now be positioned in any field in the top right two boxes.
2)
Turn the FMS Knobs to move the cursor onto the ‘Departure Time’
Field and enter the desired value. Press the ENT Key. The statistics
are calculated using the new value and the cursor moves to the next
entry field. Repeat until all desired values have been entered.
Index
Appendix
1)
Annun/Alerts
ENTERING MANUAL DATA FOR TRIP STATISTICS CALCULATIONS
60
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Flight Management
Flight
Instruments
RAIM PREDICTION
PREDICTING RAIM AVAILABILITY AT A SELECTED WAYPOINT
2)
If necessary, press the RAIM Softkey.
3)
Press the FMS Knob. The ‘Waypoint’ Field is highlighted.
4)
Turn the small FMS Knob to display the ‘Waypoint Information’ Window.
5)
Enter the desired waypoint:
Nav/Com/
XPDR/Audio
Select the ‘Aux - GPS Status’ Page.
EIS
1)
Flight
Management
Use the FMS Knob to enter the desired waypoint by identifier, facility,
or city name and press the ENT Key.
Or:
d) Press the ENT Key to accept the waypoint entry.
Use the FMS Knob to enter an arrival time and press the ENT Key.
7)
Use the FMS Knob to enter an arrival date and press the ENT Key.
8)
With the cursor highlighting ‘Compute RAIM?’, press the ENT Key. Once
RAIM availability is computed, one of the following is displayed:
Abnormal
Operation
6)
Annun/Alerts
• ‘Compute RAIM?’—RAIM has not been computed for the current
waypoint, time, and date combination
• ‘Computing Availability’—RAIM calculation in progress
Appendix
• ‘RAIM Available’—RAIM is predicted to be available for the specified
waypoint, time, and date
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
• ‘RAIM not Available’—RAIM is predicted to be unavailable for the
specified waypoint, time, and date
190-02199-01 Rev. A
Additional
Features
c) Turn the large FMS Knob clockwise to select the desired waypoint. The
system automatically fills in the identifier, facility, and city fields with the
information for the selected waypoint.
AFCS
b) Turn the small FMS Knob clockwise to display the Flight Plan, Nearest,
Recent, or User waypoints, if required.
Hazard
Avoidance
a) Turn the small FMS Knob counter-clockwise to display a list of flight
plan waypoints (the FPL list is populated only when navigating a flight
plan).
61
PREDICTING RAIM AVAILABILITY AT THE AIRCRAFT PRESENT POSITION
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Flight Management
Select the ‘Aux - GPS Status’ Page.
2)
If necessary, press the RAIM Softkey.
3)
Press the FMS Knob. The ‘Waypoint’ Field is highlighted.
4)
Press the MENU Key.
5)
With ‘Set WPT to Present Position’ highlighted, press the ENT Key.
6)
Press the ENT Key to accept the waypoint entry.
7)
Use the FMS Knob to enter an arrival time and press the ENT Key.
8)
Use the FMS Knob to enter an arrival date and press the ENT Key.
9)
With the cursor highlighting ‘Compute RAIM?’, press the ENT Key. Once
RAIM availability is computed, one of the following is displayed:
Hazard
Avoidance
• ‘Compute RAIM?’—RAIM has not been computed for the current
waypoint, time, and date combination
• ‘Computing Availability’—RAIM calculation in progress
AFCS
• ‘RAIM Available’—RAIM is predicted to be available for the specified
waypoint, time, and date
• ‘RAIM not Available’—RAIM is predicted to be unavailable for the
specified waypoint, time, and date
Select the ‘Aux - GPS Status’ Page.
2)
If necessary, press the SBAS Softkey.
3)
Press the FMS Knob, and turn the large FMS Knob to highlight ‘EGNOS’,
‘MSAS’ or ‘WAAS’.
4)
Press the ENT Key to uncheck the box.
5)
Press the FMS Knob to remove the cursor.
Index
Appendix
1)
Abnormal
Operation
DISABLING SBAS
Annun/Alerts
Additional
Features
1)
62
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Hazard Avoidance
Flight
Instruments
HAZARD AVOIDANCE
Customizing the Hazard Displays on the ‘Map - Navigation Map’ Page
With the ‘Map - Navigation Map’ Page displayed, press the MENU Key to
display the Navigation Map ‘Page Menu’. The cursor flashes on the ‘Map
Settings’ option.
2)
Press the ENT Key. The Map Setup Menu is displayed. Turn the small FMS
Knob to select ‘Weather’ to customize the display of weather features.
Select ‘Traffic’ to customize the display of traffic.
Nav/Com/
XPDR/Audio
3)
Press the small FMS Knob to return to the Navigation Map Page.
Flight
Management
EIS
1)
Changing the display range of hazard displays
Hazard
Avoidance
Turn the Joystick clockwise to display a larger area or rotate counterclockwise to display a smaller area.
DATA LINK WEATHER
2)
Press the WX LGND to show/remove the weather product age information
for PFD maps.
Appendix
With the PFD Inset Map or HSI Map displayed, press the Map/HSI Softkey.
Annun/Alerts
1)
Abnormal
Operation
Enabling/disabling the weather product age for PFD Maps
Additional
Features
WARNING: Do not use the indicated data link weather product age to
determine the age of the weather information shown by the data link weather
product. Due to time delays inherent in gathering and processing weather
data for data link transmission, the weather information shown by the data
link weather product may be older than the indicated weather product age.
AFCS
WARNING: Do not use data link weather information for maneuvering in,
near, or around areas of hazardous weather. Information contained within
data link weather products may not accurately depict current weather conditions.
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
63
DISPLAYING DATA LINK WEATHER PRODUCTS
Viewing the Weather Data Link page and changing the data link
weather source, if applicable
1)
Turn the large FMS Knob to select the Map Page Group.
2)
Turn the small FMS Knob to select the Weather Data Link (XM or FIS-B)
Page. The currently selected data link weather source appears in the page
title.
3)
If the page title does not contain the desired weather source, press the
MENU Key.
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Hazard Avoidance
a) Turn the FMS Knob to highlight ‘Display XM Weather’ or ‘Display FIS-B
Weather’ (choices may vary depending on the installed equipment).
Hazard
Avoidance
b) Press the ENT Key.
Abnormal
Operation
Additional
Features
AFCS
Viewing legends for displayed weather products on the Weather Data
Link page
1)
Select the Weather Data Link Page.
2)
Press the Legend Softkey to display the legends for the displayed weather
products.
3)
Turn the FMS Knob to scroll through the legends if more are available than
fit in the window.
4)
To remove the Weather Legends Window, press the Legend Softkey, the
ENT or the CLR Key, or press the FMS Knob.
Index
Appendix
Annun/Alerts
Setting up and customizing the Weather Data Link page
64
1)
Select the Weather Data Link page.
2)
Press the MENU Key.
3)
Turn the FMS Knob to highlight ‘Weather Setup’, then press the ENT Key.
4)
Turn the small FMS Knob to select ‘Product Group 1’ or ‘Product Group 2’,
and press the ENT Key.
5)
Turn the large FMS Knob or press the ENT Key to scroll through product
selections.
6)
Turn the small FMS Knob to scroll through options for each product (ON/
OFF, range settings, etc.).
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Hazard Avoidance
Press the ENT Key to select an option.
8)
Press the FMS Knob or CLR Key to return to the Weather Data Link page
with the changed settings.
Flight
Instruments
7)
2)
Press the MENU Key.
3)
Turn the FMS Knob to highlight ‘Weather Setup’, then press the ENT Key.
4)
Press the MENU Key.
5)
Highlight the desired default(s) to restore (all or for selection) and press
ENT Key.
6)
When finished, press the FMS Knob or press the CLR Key.
Hazard
Avoidance
Select the Weather Data Link Page.
Flight
Management
1)
Nav/Com/
XPDR/Audio
Restoring default Weather Data Link page settings
2)
Press the Map Opt Softkey.
3)
Press the softkey to enable/disable the desired weather product.
Additional
Features
Select the ‘Map - Navigation Map’ Page.
2)
Press the Map Opt Softkey.
3)
Press the Legend Softkey to show the weather legends window.
4)
When finished, press the Legend Softkey again, or press the FMS Knob or
the CLR Key to remove the window.
Setting up and customizing weather data for the navigation maps
2)
Press the MENU Key.
3)
With ‘Map Settings’ highlighted, press the ENT Key.
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
Select the Navigation Map Page.
Appendix
Select the ‘Map - Navigation Map’ Page.
Annun/Alerts
1)
Abnormal
Operation
Showing/removing the weather legend on the ‘Map - Navigation Map’
Page
1)
AFCS
Displaying Data Link Weather Products on the ‘Map - Navigation Map’
Page
1)
EIS
NOTE: ‘Product Group 2’ is only applicable to SiriusXM and Garmin Connext
Weather.
65
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Hazard Avoidance
4)
Turn the small FMS Knob to select the ‘Weather’ Group and press the ENT
Key.
5)
Turn the large FMS Knob or press the ENT Key to scroll through product
selections.
6)
Turn the small FMS Knob to scroll through options for each product (On/Off
range settings).
7)
Press the ENT Key to select an option.
8)
Press the FMS Knob or CLR Key to return to the Navigation Map Page with
the changed settings.
Hazard
Avoidance
Flight
Management
Displaying Data Link Weather products on the PFD
1)
On the PFD, press the Map/HSI Softkey.
2)
Press the desired weather product softkey(s) to enable/disable the display
of data link products on the PFD map.
3)
To enable/disable a data link lightning weather product on a PFD, press the
Lightning Softkey.
AFCS
a) Press the Datalink Softkey to enable data link lightning or press the
LTNG Off Softkey.
Additional
Features
b) Press the Back Softkey twice to return to the top-level PFD Softkeys.
1)
On the PFD, press the Map/HSI Softkey.
2)
Press the Layout Softkey.
3)
Press the WX LGND Softkey to enable/disable the weather product age,
source, and icon box display on PFD Maps.
NEXRAD (SIRIUSXM)
Displaying the NEXRAD weather product on the ‘Map - Weather Data
Link (XM)’ Page
1)
Select the ‘Map - Weather Data Link (XM)’ Page.
2)
Press the NEXRAD Softkey.
Index
Appendix
Annun/Alerts
Abnormal
Operation
Enabling/disabling the weather product icon and age display (PFD
maps)
66
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Hazard Avoidance
Press the Map Opt Softkey.
2)
Press the NEXRAD Softkey.
EIS
1)
Flight
Instruments
Displaying the NEXRAD weather product on the ‘Map - Navigation
Map’ Page
Displaying the NEXRAD weather product on PFD maps
Press the Map/HSI Softkey.
2)
Press the NEXRAD Softkey to enable/disable the display of NEXRAD
information.
Nav/Com/
XPDR/Audio
1)
Press the MENU Key.
2)
Turn the FMS Knob to select ‘Weather Setup’ and press the ENT Key.
3)
With Product Group 1 selected, turn the large FMS Knob to highlight the
NEXRAD Region field.
4)
Turn the small FMS Knob to select ‘US’ or ‘CNDA’, then press the ENT Key.
5)
To remove the menu, push the FMS Knob or the CLR Key.
Hazard
Avoidance
1)
Additional
Features
Displaying the FIS-B NEXRAD weather product on the ‘Map - Weather
Data Link (FIS-B)’ Page
2)
Press the NEXRAD Softkey. Each press cycles though a coverage option as
the softkey name changes (US, RGNL, or US/RGNL).
Displaying the FIS-B NEXRAD weather product on the ‘Map Navigation Map’ Page
3)
To change the type of NEXRAD displayed, press the MENU Key.
4)
With ‘Map Settings’ highlighted, press the ENT Key.
5)
Turn the small FMS Knob to select the ‘Weather’ Group, then press the
ENT Key.
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
Press the NEXRAD Softkey.
Appendix
2)
Annun/Alerts
Select the ‘Map - Weather Data Link (FIS-B)’ Page.
Abnormal
Operation
1)
Press the Map Opt Softkey.
AFCS
NEXRAD (FIS-B)
1)
Flight
Management
Selecting the NEXRAD Coverage Region on the Weather Data Link (XM)
Page
67
EIS
Flight
Instruments
Hazard Avoidance
6)
Turn the large FMS Knob to highlight the NEXRAD Data Region field.
7)
Turn the small FMS Knob to highlight ‘CONUS’ (continental United States),
‘RGNL’ (regional), or ‘Combined’, then press the ENT Key. This selection
also affects display of NEXRAD on the PFD Maps.
8)
When finished, press the FMS Knob or press the CLR Key.
1)
Press the Map/HSI Softkey.
2)
Press the NEXRAD Softkey to enable/disable the display of NEXRAD
information.
ECHO TOPS (SIRISUXM)
Displaying Echo Tops information
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
Displaying the FIS-B NEXRAD weather product on PFD maps
1)
Select the Weather Data Link (XM) Page.
2)
Press the Echo Top Softkey.
Displaying Cloud Tops information
1)
Select the Weather Data Link (XM) Page with the FMS Knob.
2)
Press the CLD Top Softkey.
DATA LINK LIGHTNING (SIRIUSXM)
Displaying Data Link Lightning information on Weather Data Link Page
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
CLOUD TOPS (SIRIUSXM)
1)
Turn the FMS Knob to select the Weather Data Link Page.
2)
Press the XM LTNG or DL LTNG Softkey (softkey name depends on the
selected weather source).
Index
Appendix
Displaying Data Link Lightning information on the Navigation Map
Page
68
1)
Turn the FMS Knob to select the Navigation Map Page.
2)
Press the Map Opt Softkey.
3)
Press the XM LTNG or DL LTNG Softkey.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Hazard Avoidance
Flight
Instruments
Enabling/disabling Data Link Lightning information on PFD maps
2)
Press the Lightning Softkey.
3)
Press the Datalink Softkey to enable data link lightning from the selected
data link weather source, or press the LTNG Off Softkey to disable data
link lightning.
4)
When finished, press the Back Softkey.
Nav/Com/
XPDR/Audio
On the PFD, press the Map/HSI Softkey.
CELL MOVEMENT (SIRIUSXM)
Select the Weather Data Link (XM) Page using the FMS Knob.
2)
Press the Cell MOV Softkey.
Flight
Management
Displaying Cell Movement information on the Weather Data Link (XM) Page
1)
3)
With ‘Map Settings’ highlighted, press the ENT Key.
4)
Turn the small FMS Knob to highlight ‘Weather’ and press the ENT Key.
5)
Turn the large FMS Knob to ‘On’ or ‘Off’ for the Cell Movement menu
option. When set to ‘On’, Cell Movement is enabled/disabled with the
NEXRAD weather product on navigation maps. When set to ‘Off’, Cell
Movement is not displayed on navigation maps.
6)
When finished, push the FMS Knob or CLR Key to remove the menu.
Abnormal
Operation
Press the MENU Key.
Additional
Features
2)
AFCS
Use the FMS Knob to select the Navigation Map Page.
Hazard
Avoidance
Setting up the system to display Cell Movement with NEXRAD on
navigation maps
1)
Annun/Alerts
SIGMETS AND AIRMETS
Displaying SIGMETs and AIRMETs
2)
Press the SIG/AIR Softkey.
3)
To view the text of the SIGMET or AIRMET, press the Joystick and move the
Map Pointer over the icon.
4)
Press the ENT key. The following figure shows sample SIGMET text.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
Select the Weather Data Link Page.
Appendix
1)
190-02199-01 Rev. A
EIS
1)
69
METARS AND TAFS
Displaying METAR and TAF text on the MFD
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Hazard Avoidance
1)
On the Weather Data Link Page, press the METAR Softkey.
2)
Press the Joystick and pan to the desired airport.
3)
Press the ENT Key. The Weather Information Page is shown with METAR
and TAF text.
4)
Use the FMS Knob or the ENT Key to scroll through the METAR and TAF
text. METAR text must be completely scrolled through before scrolling
through the TAF text.
5)
Press the FMS Knob or the CLR Key to return to the Weather Data Link
Page.
Additional
Features
AFCS
Hazard
Avoidance
Displaying original METAR text on the Active Flight Plan Page
1)
Select the ‘FPL - Active Flight Plan’ Page on the MFD.
2)
Press the FMS Knob to activate the cursor.
3)
Turn the large FMS Knob to highlight a waypoint with an available METAR
(indicated with a METAR flag next to it). The METAR text will appear in the
‘Selected Waypoint Weather’ Window below.
4)
When finished, press the FMS Knob to remove the cursor or press the FPL
Key to exit the Active Flight Plan Page.
1)
On the PFD, press the Map/HSI Softkey.
2)
Press the METAR Softkey.
3)
Press the Joystick and pan to the desired METAR flag. Original METAR
text appears on the map.
4)
When finished, press the Joystick to remove the Map Pointer.
SURFACE ANALYSIS AND CITY FORECAST (SIRIUSXM)
Displaying Surface Analysis and City Forecast information
Index
Appendix
Annun/Alerts
Abnormal
Operation
Displaying original METAR text information on the PFD Inset Map
70
1)
Select the ‘Map - Weather Data Link (XM)’ Page.
2)
Press the More WX Softkey.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Hazard Avoidance
Press the SFC Softkey.
4)
Press the softkey for the desired forecast time: Current, 12 HR, 24 HR, 36
HR, or 48 HR. The SFC Softkey label changes to show the forecast time
selected.
EIS
Or:
Flight
Instruments
3)
Press the Off Softkey to disable the display of the weather product.
Nav/Com/
XPDR/Audio
FREEZING LEVEL (SIRIUSXM)
Displaying Freezing Level information
Select the ‘Map - Weather Data Link (XM)’ Page.
2)
Press the More WX Softkey.
3)
Press the FRZ LVL Softkey.
Flight
Management
1)
Hazard
Avoidance
WINDS ALOFT
Displaying the Winds Aloft weather product
2)
Press the More WX Softkey.
3)
Press the Wind Softkey.
4)
Press a softkey for the desired altitude level: SFC (surface) up to 42,000
feet. Press the Next or Prev Softkey to cycle through the altitude softkeys.
The Wind Softkey label changes to reflect the altitude selected.
Additional
Features
Select the ‘Map - Weather Data Link (XM)’ Page with the FMS Knob.
AFCS
1)
Abnormal
Operation
Enabling/disabling the Vertical Situation Display (containing winds
aloft data)
2)
Press the Map Opt Softkey.
3)
Press the Inset Softkey.
4)
Press the VSD Softkey to enable/disable the Vertical Situation Display.
Appendix
Select the ‘Map - Navigation Map’ Page.
Annun/Alerts
1)
Enabling/disabling winds aloft data display for the VSD
Select the ‘Map - Navigation Map’ Page.
2)
Press the MENU Key.
3)
With ‘Map Settings’ highlighted, press the ENT Key.
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
1)
71
4)
Turn the small FMS Knob to select ‘VSD’ and press the ENT Key.
5)
Turn the large FMS Knob to highlight the Winds On/Off field.
6)
Turn the small FMS Knob to select ‘On’ or ‘Off’.
7)
Press the FMS Knob or CLR Key to return to the ‘Map - Navigation Map’
Page with the changed settings.
COUNTY WARNINGS (SIRIUSXM)
Displaying County Warning information
2)
Press the More WX Softkey.
3)
Press the County Softkey.
1)
Select the ‘Map - Weather Data Link (XM)’ Page with the FMS Knob.
2)
Press the More WX Softkey.
3)
Press the Cyclone Softkey.
ICING (CIP & SLD) (SIRIUSXM)
Displaying Icing data
Annun/Alerts
Abnormal
Operation
Additional
Features
Select the ‘Map - Weather Data Link (XM)’ Page with the FMS Knob.
Displaying cyclone (hurricane) track information
1)
Select the ‘Map - Weather Data Link (XM)’ Page.
2)
Press the More WX Softkey.
3)
Press the ICNG Softkey.
4)
Press a softkey for the desired altitude level: 1,000 feet up to 30,000 feet.
Press the Next or PREV Softkey to cycle through the altitude softkeys. The
ICNG Softkey label changes to indicate the altitude selected.
TURBULENCE (SIRIUSXM)
Displaying Turbulence data
Index
Appendix
1)
CYCLONE (SIRIUSXM)
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Hazard Avoidance
72
1)
Select the ‘Map - Weather Data Link (XM)’ Page.
2)
Press the More WX Softkey.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Hazard Avoidance
Press the TURB Softkey.
4)
Press a softkey for the desired altitude: 21,000 feet up to 45,000 feet.
Press the Next or PREV Softkey to cycle through the altitude softkeys. The
TURB Softkey label changes to indicate the altitude selection.
Flight
Instruments
3)
EIS
PIREPS AND AIREPS
Nav/Com/
XPDR/Audio
Displaying PIREP and AIREP text
3)
Press the PIREPS or AIREPS Softkey. (Note the AIREPS Softkey is only
available with the SiriusXM Weather service.)
4)
Press the Joystick and pan to the desired weather report. A gray circle will
appear around the weather report when it is selected.
5)
Press the ENT Key. The Weather Information Page is shown with PIREP or
AIREP text. The data is first displayed in a decoded fashion, followed by the
original text. Note the original text may contain additional information not
present in the decoded version.
6)
Use the FMS Knob or the ENT Key to scroll through the PIREP or AIREP
text.
7)
Press the FMS Knob or the CLR Key to return to the ‘Map - Weather Data
Link (XM)’ Page.
Additional
Features
Press the More WX Softkey.
Abnormal
Operation
TFRS
Displaying TFR Data
Press the Joystick and pan the map pointer over a TFR to highlight it. The
system displays TFR summary information above the map.
3)
Press the ENT Key. The system displays a pop-up menu.
4)
If necessary, turn the FMS Knob to select ‘Review Airspaces’ and press the
ENT Key. The system displays the TFR Information window.
5)
Press the FMS Knob or the CLR Key to remove the TFR Information
window.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
2)
Appendix
Select the ‘Map - Weather Data Link (XM)’ Page or the ‘Map - Navigation
Map’ Page.
Annun/Alerts
1)
190-02199-01 Rev. A
AFCS
2)
Hazard
Avoidance
Select the ‘Map - Weather Data Link (XM)’ Page.
Flight
Management
1)
73
Hazard Avoidance
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Setting up and customizing TFR data for maps on which TFR data can
be displayed
1)
Select the ‘Map - Navigation Map’ Page.
2)
Press the MENU Key.
3)
With ‘Map Settings’ highlighted, press the ENT Key.
4)
Turn the small FMS Knob to select the ‘Aviation’ Group and press the ENT
Key.
5)
Turn the large FMS Knob to scroll to the TFR product range setting.
6)
Turn the small FMS Knob to scroll through options (Off, range settings).
7)
Press the ENT Key to select an option.
8)
Press the FMS Knob or CLR Key to return to the Navigation Map Page with
the changed settings.
FIS-B WEATHER
AFCS
Viewing FIS-B status
Turn the large FMS Knob to select the Aux Page Group.
2)
Turn the small FMS Knob to select the ‘Aux - ADS-B Status’ Page.
Abnormal
Operation
Additional
Features
Enabling/disabling the FIS-B weather feature
1)
Select the ‘Map - Weather Data Link (FIS-B)’ Page.
2)
Press the MENU Key.
3)
Turn the small FMS Knob to highlight ‘Enable FIS-B Weather’ or ‘Disable
FIS-B Weather’, and press the ENT Key.
Appendix
TERRAIN DISPLAYS
WARNING: Do not use terrain avoidance displays as the sole source of
information for maintaining separation from terrain and obstacles. Garmin
obtains terrain and obstacle data from third party sources and cannot
independently verify the accuracy of the information.
Index
Annun/Alerts
1)
NOTE: Terrain data is not displayed when the aircraft is outside of the installed
terrain database coverage area.
74
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Hazard Avoidance
Hazard
Avoidance
AFCS
Additional
Features
On-Ground Legend
Flight
Management
RELATIVE TERRAIN SYMBOLOGY
The terrain system uses colors and symbols to represent terrain and obstacles (with
heights greater than 200 feet above ground level, AGL) present in the databases relative to aircraft altitude. The system dynamically adjusts these colors as the aircraft
altitude changes, and after takeoff and landing.
Nav/Com/
XPDR/Audio
One of the following terrain systems is installed on this aircraft:
• Terrain Proximity
• Terrain-SVT (included with the Garmin SVT option when the Terrain Awareness and Warning System Class-B (TAWS-B) is not installed; refer to the Flight
Instruments section for more information about Garmin SVT.)
• TAWS-B (optional)
EIS
NOTE: Terrain and obstacle alerting requires the Terrain-SVT or TAWS-B option.
No terrain or obstacle alerting occurs for the Terrain Proximity feature.
Flight
Instruments
NOTE: Terrain and obstacle alerting is not available north of 89º North latitude
and south of 89º South latitude. This is due to limitations present within the
Terrain database and the system’s ability to process the data representing
the affected areas.
In-Air Legend
Abnormal
Operation
Annun/Alerts
Relative Terrain Legend
Press the Map Opt Softkey (for the PFD Inset Map, press the Map/HSI
Softkey).
2)
Press the TER Softkey until REL is shown to display terrain and obstacle
data.
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
1)
Appendix
Displaying terrain and obstacle information (MFD maps other than the
terrain page)
75
Hazard Avoidance
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Customizing terrain and obstacle display on the Navigation Map Page
1)
Select the Navigation Map Page.
2)
Press the MENU Key.
3)
With ‘Map Settings’ highlighted, press the ENT Key.
4)
Turn the small FMS Knob to select the ‘Map’ Group and press the ENT Key.
5)
Turn the large FMS Knob or press the ENT Key to scroll through product
selections.
Flight
Management
• Terrain Display – Selects terrain ‘Off’ for no terrain, ‘Topo’ for topographic
information, or relative terrain ‘Rel’. The distance field selects the
maximum map range to display terrain information before it is removed
from the map.
Additional
Features
AFCS
Hazard
Avoidance
• Obstacle Data – Turns the display of obstacles on or off. The distance field selects
the maximum map range to display obstacle symbols before they are
removed from the map.
6)
Turn the small FMS Knob to scroll through options for each product (ON/
OFF, range settings).
7)
8)
Press the ENT Key to select an option.
Press the FMS Knob or CLR Key to return to the Navigation Map Page with
the changed settings.
TERRAIN PAGE
Annun/Alerts
Abnormal
Operation
Displaying the terrain page
1)
Turn the large FMS Knob to select the Map Page Group.
2)
Turn the small FMS Knob to select the Map - Terrain Proximity/Terrain-SVT/
TAWS-B Page.
1)
Press the MENU Key.
2)
Select ‘Show Aviation Data’ or ‘Hide Aviation Data’ (choice dependent on
current state) and press the ENT Key.
Index
Appendix
Showing/hiding aviation information on the terrain page
76
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Hazard Avoidance
Flight
Instruments
VERTICAL SITUATION DISPLAY (VSD) TERRAIN
The system offers a Vertical Situation Display (VSD), which includes a
profile of terrain and obstacles in an inset window on the bottom of the
Navigation Map Page.
EIS
Enabling/Disabling the Vertical Situation Display (VSD)
Select the Navigation Map Page.
2)
Select the Map Opt Softkey.
3)
Select the Inset Softkey.
4)
Select the VSD Softkey to enable or disable the VSD.
Nav/Com/
XPDR/Audio
1)
0.6 nm
Departure
0.6 nm
Terminal
2.0 nm
Enroute
4.0 nm
Oceanic
4.0 nm
AFCS
Approach
Hazard
Avoidance
Total VSD Width
Flight
Management
Flight Phase
VSD Terrain Width Varies with Phase of Flight
Additional
Features
Selecting a VSD Mode
2)
Select the Inset Softkey.
3)
Select the VSD Softkey displaying the VSD mode in cyan. Each press of the
softkey cycles through a mode selection: FPL (flight plan), TRK (track), or
Auto.
Customizing the Track Mode Boundary display on the Navigation Map
Page
Select the Navigation Map Page.
2)
Press the MENU Key.
3)
With ‘Map Settings’ highlighted, press the ENT Key.
Appendix
1)
Annun/Alerts
Select the Navigation Map Page.
Abnormal
Operation
1)
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
77
Flight
Instruments
Hazard Avoidance
4)
Turn the small FMS Knob to select the ‘VSD’ Group and press the ENT Key.
5)
Turn the large FMS Knob or press the ENT Key to scroll through product
selections.
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
• TRK Mode BNDRY – Enables/disables the display of the Track Mode
Boundary and sets maximum range at which Track Mode Boundary is
shown.
6)
Turn the small FMS Knob to scroll through options (On/Off range settings).
7)
8)
Press the ENT Key to select an option.
Press the FMS Knob or CLR Key to return to the Navigation Map Page with
the changed settings.
TERRAIN-SVT AND TAWS-B ALERTING DISPLAYS
Alerts are issued when flight conditions meet parameters that are set within Terrain-SVT or TAWS-B software algorithms. Terrain alerts typically employ a CAUTION
or a WARNING alert severity level, or both. When an alert is issued, visual annunciations are displayed and voice alerts are simultaneously issued.
Select the Terrain Page.
2)
Press the Inhibit Softkey.
WARNING: Do not rely solely upon the display of traffic information for collision avoidance maneuvering. The traffic display does not provide collision
avoidance resolution advisories and does not under any circumstances or
conditions relieve the pilot’s responsibility to see and avoid other aircraft.
TRAFFIC INFORMATION SERVICE (TIS)
NOTE: TIS is available only when the aircraft is within the service volume of
a TIS-capable terminal radar site. Aircraft without an operating transponder
are invisible to both Traffic Advisory Systems (TAS), Traffic Alert and Collision
Avoidance Systems (TCAS) and TIS. Aircraft without altitude reporting capability are shown without altitude separation data or climb descent indication.
Index
Appendix
Annun/Alerts
1)
TRAFFIC SYSTEMS
Abnormal
Operation
Additional
Features
AFCS
Inhibiting Terrain-SVT or TAWS-B FLTA and PDA Alerting
NOTE: Mode S TIS is disabled if another traffic system such as TAS or Automatic Dependent Surveillance-Broadcast (ADS-B) is installed.
78
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Hazard Avoidance
1)
Press the Map Opt Softkey.
2)
Press the Traffic Softkey. Traffic is now displayed on the navigation map.
Flight
Instruments
Enabling/disabling traffic overlays (MFD navigation maps)
EIS
Enabling/disabling traffic information on the PFD Inset Map or HSI
Map
On the PFD, press the Map/HSI Softkey.
2)
Press the Traffic Softkey to enable/disable the display traffic information on
the Inset Map or HSI Map.
Flight
Management
Customizing traffic display on the Navigation Map Page
2)
Press the MENU Key.
3)
With ‘Map Setup’ highlighted, press the ENT Key.
4)
Turn the small FMS Knob to select the ‘Traffic’ Group and press the ENT
Key.
5)
Turn the large FMS Knob or press the ENT Key to scroll through product
selections.
AFCS
Select the Navigation Map Page.
Hazard
Avoidance
1)
Nav/Com/
XPDR/Audio
1)
• Traffic – Turns the display of traffic data on or off
Additional
Features
• Traffic Mode – Selects the traffic mode for display; select from:
- All Traffic - Displays all traffic
Abnormal
Operation
- TA Only - Displays Traffic Alerts only
• Traffic Symbols – Selects the maximum range at which traffic
symbols are shown
Turn the small FMS Knob to scroll through options for each product (On/Off,
range settings, etc.).
7)
Press the ENT Key to select an option.
8)
Press the FMS Knob or CLR Key to return to the Navigation Map Page with
the changed settings.
Appendix
6)
Annun/Alerts
• Traffic Labels – Selects the maximum range at which traffic labels
are shown (with the option to turn off)
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
79
Hazard Avoidance
EIS
Flight
Instruments
Displaying traffic on the Traffic Map Page
Turn the large FMS Knob to select the Map Page Group.
2)
Turn the small FMS Knob to select the Traffic Map Page.
3)
Confirm TIS is in Operating Mode:
Press the TIS OPER Softkey to begin displaying traffic.
Flight
Management
Nav/Com/
XPDR/Audio
Switching between TIS modes
1)
Select the Traffic Map Page.
2)
Press the Standby or Operate Softkey to switch between modes. The mode
is displayed in the upper right corner of the Traffic Map Page.
Hazard
Avoidance
Muting the “TIS Not Available” voice alert
1)
Select the Traffic Map Page.
2)
Press the TNA Mute Softkey. The status is displayed in the upper left corner
of the Traffic Map Page.
GTS 800 TRAFFIC ADVISORY SYSTEM (TAS)
WARNING: Do not rely solely upon the display of traffic information for
collision avoidance maneuvering. The traffic display does not provide collision avoidance resolution advisories and does not under any circumstances
or conditions relieve the pilot’s responsibility to see and avoid other aircraft.
Additional
Features
AFCS
1)
Annun/Alerts
Abnormal
Operation
WARNING: Do not rely solely upon the display of traffic information to
accurately depict all of the traffic within range of the aircraft. Due to lack
of equipment, poor signal reception, and/or inaccurate information from
aircraft or ground stations, traffic may be present that is not represented on
the display. .
Index
Appendix
NOTE: ADS-B traffic symbols are only displayed if the equipment installed
in the aircraft is capable of receiving ADS-In traffic reports.
80
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Hazard Avoidance
2)
Turn the small FMS Knob to select the Traffic Map Page.
3)
Turn the Joystick to set the range to 2/6 nm to allow for full test pattern to
be displayed during test.
4)
Press the Standby or TAS STBY Softkey.
5)
Press the Test Softkey. Self test takes approximately eight seconds to
complete. When completed successfully, traffic symbols are displayed and
a voice alert “TAS System Test OK” is heard. If the self test fails, the system
reverts to Standby Mode and a voice alert “TAS System Test Fail” is heard.
Hazard
Avoidance
Turn the large FMS Knob to select the Map Page Group.
Flight
Management
1)
Nav/Com/
XPDR/Audio
Testing the traffic system
EIS
NOTE: If Garmin GTX 345R transponder is installed, refer to the Automatic
Dependent Surveillance-Broadcast (ADS-B) Traffic discussion for more information about ADS-B traffic displays.
Flight
Instruments
NOTE: Pilots should be aware of traffic system limitations. Traffic systems
require transponders of other aircraft to respond to system interrogations.
If the transponders do not respond to interrogations due to phenomena
such as antenna shading or marginal transponder performance, traffic may
be displayed intermittently, or not at all. Aircraft without altitude reporting
capability are shown without altitude separation data or climb descent indication. Pilots should remain vigilant for traffic at all times.
Additional
Features
Abnormal
Operation
Annun/Alerts
Displaying Traffic on the Traffic Map Page
AFCS
NOTE: Traffic surveillance is not available during the system test. Use caution when performing a system test during flight.
Turn the large FMS Knob to select the Map Page Group.
2)
Turn the small FMS Knob to select the Traffic Map Page.
3)
Press the TAS OPER Softkey to begin displaying TAS traffic. ‘OPERATING’
is displayed in the Traffic Mode field.
4)
Press the ADS-B Softkey to begin display ADS-B traffic.
Appendix
1)
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
81
EIS
Flight
Instruments
Hazard Avoidance
5)
Press the ALT Mode Softkey to change the altitude volume. Select the
desired altitude volume by pressing the Above, Normal, Below, or
UNREST (unrestricted) Softkey. The selection is displayed in the Altitude
Mode field. Press the Back Softkey to return to the previous level softkeys.
6)
Press the Motion Softkey.
7)
Press one of the following softkeys:
Nav/Com/
XPDR/Audio
Absolute: Displays the motion vector pointing in the absolute direction.
Relative: Displays the motion vector relative to own aircraft
Flight
Management
Off: Disables the display of the motion vector.
8)
Press the Back Softkey to return to the previous level softkeys.
9)
Press the TAS STBY Softkey to place the system in the Standby Mode.
‘STANDBY’ is displayed in the Traffic Mode field.
Hazard
Avoidance
10) Rotate the Joystick clockwise to display a larger area or rotate counterclockwise to display a smaller area.
Additional
Features
AFCS
Enabling/disabling the display of Flight ID for traffic
1)
Select the Traffic Map Page.
2)
Press the FLT ID Softkey to enable/disable the display of Flight IDs for
displayed traffic.
Abnormal
Operation
Enabling/disabling traffic information (MFD maps other than the
Traffic Map Page)
1)
Press the Map Opt Softkey.
2)
Press the Traffic Softkey. Traffic is now displayed on the map.
1)
Select the Navigation Map Page.
2)
Press the MENU Key.
3)
With ‘Map Settings’ highlighted, press the ENT Key.
4)
Turn the small FMS Knob to select the Traffic Group and press the ENT Key.
Index
Appendix
Annun/Alerts
Customizing the traffic display on the Navigation Map Page
82
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Hazard Avoidance
Turn the large FMS Knob or press the ENT Key to scroll through the
selections.
Flight
Instruments
5)
Traffic – Turns the display of traffic data on or off
•
Traffic Mode – Selects the traffic mode for display. Select from: All
Traffic, TA/PA, TA Only
•
Traffic Symbols – Selects the maximum range at which traffic symbols
are shown
•
Traffic Labels – Selects the maximum range at which traffic labels
(relative altitude, vertical trend) are shown with the option to turn off
Press the ENT Key to select an option.
8)
Press the FMS Knob or CLR Key to return to the Navigation Map Page.
Hazard
Avoidance
7)
Flight
Management
Turn the small FMS Knob to scroll through options (On/Off, range settings,
etc.).
Showing the HSI Traffic Map
Press the Map/HSI Softkey.
2)
Press the Layout Softkey.
AFCS
1)
3) Press the HSI Trfc Softkey.
Traffic information can also be overlaid on PFD navigation maps.
Additional
Features
Enabling/disabling traffic overlay on PFD navigation maps
With the Inset Map or HSI Map displayed, press the Map/HSI Softkey on
the PFD.
2)
Press the Traffic Softkey to enable/disable the display traffic information.
Abnormal
Operation
1)
Annun/Alerts
ADS-B TRAFFIC
Enabling/disabling the display of ADS-B traffic
Select the Traffic Map Page.
2)
Press the ADS-B Softkey.
Appendix
1)
Testing the display of ADS-B traffic
Select the Traffic Map Page.
2)
If necessary, turn the Joystick to select a map range of 2 and 6 nm to
ensure full test pattern display.
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
1)
Nav/Com/
XPDR/Audio
6)
EIS
•
83
3)
Ensure the ADS-B Softkey is disabled.
4)
If the optional TAS is installed, ensure the TAS STBY Softkey is enabled.
5)
Press the Test Softkey. A test pattern of traffic symbols appears during the
test, and a ‘TRAFFIC’ annunciation appears on the PFDs. At the conclusion
of the test, the system issues the voice alert “Traffic System Test”. If the
test pattern is displayed and the voice alert is heard, the system has passed
the test.
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Hazard Avoidance
2)
Press one of the following softkeys:
•
Hazard
Avoidance
On the Traffic Map Page, press the ALT Mode Softkey.
Above: Displays Other Non-Threat and proximity traffic from 9900 feet
above the aircraft to 2700 feet below the aircraft. Typically used during
climb phase of flight.
•
Normal: Displays Other Non-Threat and proximity traffic from 2700
feet above the aircraft to 2700 feet below the aircraft. Typically used
during enroute phase of flight.
AFCS
1)
•
Below: Displays Other Non-Threat and proximity traffic from 2700 feet
above the aircraft to 9900 feet below the aircraft. Typically used during
descent phase of flight.
Additional
Features
Flight
Management
Changing the altitude range
•
UNREST (unrestricted): All traffic is displayed from 9900 feet above
and 9900 feet below the aircraft.
Abnormal
Operation
3)
To return to the Traffic Map Page, press the Back Softkey.
1)
Select the Traffic Map Page.
2)
Press the Motion Softkey.
3)
Press one of the following softkeys:
•
Absolute: Displays the motion vector pointing in the absolute
direction.
•
Relative: Displays the motion vector relative to own aircraft
•
Off: Disables the display of the motion vector.
Index
Appendix
Annun/Alerts
Enabling/disabling the Motion Vector display
84
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Hazard Avoidance
Flight
Instruments
Adjusting the duration for the Motion Vector projected time
2)
Press the Motion Softkey.
3)
Press the Duration Softkey.
4)
Press a softkey for the desired duration (30 SEC, 1 MIN, 2 MIN, 5 MIN).
5)
When finished, press the Back Softkey to return to the Traffic Map Page.
Nav/Com/
XPDR/Audio
Select the Traffic Map Page.
Showing additional traffic information
2)
Press the FMS Knob. A cyan border appears on the first selected traffic
symbol. Additional information appears in a window in the lower-left
corner of the Traffic Map Page.
3)
To select a different aircraft symbol, turn the FMS Knob to move the cyan
border until another symol is selected.
4)
When finished, press the FMS Knob again to disable the traffic selection.
Hazard
Avoidance
Select the Traffic Map Page.
Flight
Management
1)
EIS
1)
AFCS
Changing the display range on the Traffic Map Page
Turn the Joystick to select the desired range.
Viewing ADS-B Traffic Status
Turn the large FMS Knob to select the Aux Page Group.
2)
Turn the small FMS Knob to select the ‘Aux - ADS-B Status’ Page.
Additional
Features
1)
Abnormal
Operation
Annun/Alerts
Appendix
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
85
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Hazard Avoidance
Blank Page
86
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
AFCS
NOTE: If the attitude information required for the default flight director modes
becomes invalid or unavailable, the autopilot automatically disengages.
Modes Selected
Vertical
Flight
Management
Lateral
Nav/Com/
XPDR/Audio
Control Pressed
EIS
ACTIVATING THE FLIGHT DIRECTOR
An initial press of a key listed in the following table (when the flight director is not
active) activates the pilot-side flight director in the listed modes.
Flight
Instruments
AUTOMATIC FLIGHT CONTROL SYSTEM
Roll Hold (default)
ROL
Pitch Hold (default)
PIT
AP Key
Roll Hold (default)
ROL
Pitch Hold (default)
PIT
CWS Button
Roll Hold (default)
ROL
Pitch Hold (default)
PIT
GA Button
Go Around (in air)
GA
Go Around (in air)
GA
ALT Key
Roll Hold (default)
ROL
Altitude Hold
ALT
VS Key
Roll Hold (default)
ROL
Vertical Speed
VS
FLC Key
Roll Hold (default)
ROL
Flight Level Change
FLC
VNV Key
Roll Hold (default)
ROL
Vertical Path Tracking*
VPTH
NAV Key
Navigation**
GPS
VOR
LOC
Pitch Hold (default)
PIT
APR Key
Approach**
GPS
VOR
LOC
Pitch Hold (default)
PIT
HDG Key
Heading Select
HDG
Pitch Hold (default)
PIT
Hazard
Avoidance
FD Key
AFCS
Additional
Features
Abnormal
Operation
**The selected navigation receiver must have a valid VOR or LOC signal or active GPS course before
NAV or APR Key press activates flight director.
Annun/Alerts
*Valid VNV flight plan must be entered before VNV Key press activates flight director.
Appendix
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
87
VERTICAL MODES
Vertical Mode
Description
Control
Annunciation
Pitch Hold
Holds the current aircraft pitch attitude; may
be used to climb/descend to the Selected
Altitude
(default)
PIT
Selected Altitude
Capture
Captures the Selected Altitude
*
ALTS
Altitude Hold
Holds the current Altitude Reference
ALT Key
ALT
nnnnn ft
Vertical Speed
Maintains the current aircraft vertical
speed; may be used to climb/descend to the
Selected Altitude
VS Key
VS
nnnn fpm
Flight Level Change
Maintains the current aircraft airspeed in IAS
while the aircraft is climbing/descending to
the Selected Altitude
FLC Key
FLC
nnn kt
* ALTS armed automatically when PIT, VS, FLC, TO, or GA active, and under VPTH when Selected
Altitude is to be captured instead of VNAV Target Altitude
LATERAL MODES
Lateral Mode
Description
Control
Annunciation
Roll Hold
Holds the current aircraft roll
attitude or rolls the wings level,
(default)
depending on the commanded
bank angle
ROL
Heading Select
Captures and tracks the Selected
HDG Key
Heading
HDG
Navigation, GPS Arm/
Capture/Track
Navigation, VOR Enroute
Arm/Capture/Track
Navigation, LOC Arm/
Capture/Track
(No Glideslope)
GPS
Captures and tracks the selected
NAV Key
navigation source (GPS, VOR, LOC)
VOR
LOC
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
AFCS
88
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
AFCS
Lateral Mode
VNAV
Captures and tracks the VNAV
flight path
Captures
the
Vertical
Navigation (VNV) Target
Altitude
Captures and tracks the SBAS
glidepath on approach
Captures and tracks the ILS
glideslope on approach
VNV
Key
VPTH
*
ALTV
APR
Key
Approach, GPS Arm/
Capture/Track
Approach, VOR Arm/
Capture/Track
Approach, ILS Arm/
Capture/Track
(Glideslope Mode
automatically armed)
Captures and tracks the
selected navigation source
(GPS, VOR, LOC)
Go Around
Commands a constant pitch
GA
angle and wings level in the air Button
GP
Flight
Management
Glideslope
Annunciation
Nav/Com/
XPDR/Audio
Glidepath
Control
EIS
VNAV Target Altitude
Capture
Description
Flight
Instruments
COMBINATION MODES (VNV, APR, NAV, BC, GA)
GS
GPS
Hazard
Avoidance
APR
Key
VAPP
AFCS
LOC
Additional
Features
GA
Abnormal
Operation
* ALTV is armed automatically under VPTH when VNAV Target Altitude is to be captured instead of
Selected Altitude.
Annun/Alerts
Appendix
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
89
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
AFCS
Blank Page
90
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Additional Features
Flight
Instruments
ADDITIONAL FEATURES
TERMINAL PROCEDURE CHARTS
Index
91
Appendix
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Annun/Alerts
190-02199-01 Rev. A
Abnormal
Operation
FliteCharts® resemble the paper version of AeroNav Services terminal procedures
charts. The charts are displayed with high-resolution and in color for applicable
charts. The MFD depiction shows the aircraft position on the moving map in the plan
view of most approach charts and on airport diagrams.
Additional
Features
FliteCharts®
AFCS
ChartView resembles the paper version of Jeppesen terminal procedures charts.
The charts are displayed in full color with high-resolution. The MFD depiction shows
the aircraft position on the moving map in the plan view of most approach charts and
on airport diagrams.
The ChartView database is updated on a 14-day cycle. If the ChartView database is
not updated within 70 days of the expiration date, ChartView will no longer function.
Hazard
Avoidance
ChartView
Flight
Management
SafeTaxi® is an enhanced feature that gives greater map detail as the map range
is adjusted in on the airport. The airport display on the map reveals runways with
numbers, taxiways identifiers, and airport landmarks including ramps, buildings,
control towers, and other prominent features. Resolution is greater at lower map
ranges. The aircraft symbol provides situational awareness while taxiing.
Pressing the Detail Softkey (declutter) once removes the taxiway markings and
airport identification labels. Pressing the Detail Softkey twice removes VOR station
ID, the VOR symbol, and intersection names if within the airport plan view. Pressing
the Detail Softkey a third time removes the airport runway layout, unless the airport
in view is part of an active route structure. Pressing the Detail Softkey again cycles
back to the original map detail.
The SafeTaxi database contains detailed airport diagrams for selected airports.
These diagrams provide the pilot with situational awareness by displaying the aircraft
position in relation to taxiways, ramps, runways, terminals, and services. This
information should not be used by the pilot as the basis for maneuvering the aircraft
on the ground. This database is updated on a 56-day cycle.
Nav/Com/
XPDR/Audio
SafeTaxi®
EIS
NOTE: With the availability of SafeTaxi®, ChartView, or FliteCharts®, it may
be necessary to carry another source of charts on-board the aircraft.
The FliteCharts database contains procedure charts for the United States only.
This database is updated on a 28-day cycle. If not updated within 180 days of the
expiration date, FliteCharts will no longer function.
Selecting Preferred Charts Source
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Additional Features
1)
While viewing a chart press the MENU Softkey to display the ‘Page Menu’
options.
2)
Turn the large FMS Knob to highlight the ‘Chart Setup’ menu option and
press the ENT Key.
3)
Turn the large FMS Knob to move to the ‘Preferred Charts Source’ option.
4)
Turn the small FMS Knob to choose between the available options
(FliteCharts, ChartView).
Hazard
Avoidance
Selecting Terminal Procedures Charts
While viewing the ‘MAP-Navigation Map’ Page, ‘NRST-Nearest Airport’
Page, or ‘FPL-Flight Plan’ Page, select the Charts Softkey.
Additional
Features
AFCS
Or:
1)
Press the MENU Key to display the ‘Page Menu.’
2)
Turn the large FMS Knob to scroll through the ‘Options’ Menu to Charts.
3)
Press the ENT Key to display the chart.
1)
While viewing the Airport Taxi Diagram, select the Full SCN Softkey to
display the information windows (Airport, Info).
2)
Press the FMS Knob to activate the cursor.
3)
Turn the large FMS Knob to highlight the Airport, Info, Runways, or
Frequencies Box.
4)
Turn the small FMS Knob to select the Info Box choices. If multiple choices
are available, scroll to the desired choice with the large FMS Knob and
press the ENT Key to complete the selection.
5)
Press the FMS Knob again to deactivate the cursor.
Index
Appendix
Annun/Alerts
Abnormal
Operation
Selecting Additional Information:
92
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Additional Features
Flight
Instruments
Selecting full screen On or Off
While viewing a terminal chart press the CHRT Opt Softkey to display
additional chart view options.
2)
Press Full SCN Softkey to toggle full screen on or off for the selected chart.
EIS
1)
Selecting Day, Night, or Automatic View:
While viewing a terminal chart press the MENU Key to display the ‘Page
Menu’ Options.
2)
Turn the large FMS Knob to highlight the ‘Chart Setup’ Menu Option and
press the ENT Key.
3)
Turn the large FMS Knob to move to the ‘Color Scheme’ Option.
4)
Turn the small FMS Knob to choose between ‘Day, Auto, and Night’ Options.
5)
If Auto Mode is selected, turn the large FMS Knob to select the percentage
field. Use the small FMS Knob to change the percentage value. The
percentage value is the day/night crossover point based on the percentage
of backlighting intensity. For example, if the value is set to 15%, the day/
night display changes when the display backlight reaches 15% of full
brightness.
Nav/Com/
XPDR/Audio
1)
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
93
Index
190-02199-01 Rev. A
Appendix
AIRPORT DIRECTORY
The Aircraft Owners and Pilots Association (AOPA) or AC-U-KWIK Airport
Directory database offers detailed information regarding services, hours of operation,
lodging options, and more for various airports. This information is viewed on the
WPT-Airport Information Page.
Annun/Alerts
1) Select the ‘Map - IFR/VFR Charts’ Page.
2) Press the VFR, IFR Low, or IFR High Softkey to display the desired chart.
Abnormal
Operation
Selecting IFR Low, IFR High, VFR Charts
Additional
Features
IFR/VFR Charts
IFR/VFR charts resemble the paper version and are displayed with high-resolution
and in color for applicable charts.
AFCS
Press the FMS Knob when finished to remove the ‘Chart Setup’ Menu.
Hazard
Avoidance
6)
Flight
Management
The display must be changed in order for the new setting to become active.
This may be accomplished by selecting another page or changing the
display range.
Additional Features
While viewing the WPT-Airport Information Page, if necessary, press the
Info 1 Softkey to change the softkey label to display Info 2. Airport
information is displayed on the right half of the display.
SIRIUSXM™ RADIO ENTERTAINMENT
The XM Radio Page provides information and control of the audio entertainment
features of the SiriusXM™ Satellite Radio.
Selecting the XM Radio Page
1)
Turn the large FMS Knob to select the Auxiliary Page Group.
2)
Turn the small FMS Knob to select the displayed ‘Aux - XM Information’
Page.
3)
Select the Radio Softkey to show the ‘XM Radio’ Page where audio
entertainment is controlled.
Active Channel and Channel List
The Active Channel Box on the XM Radio Page displays the currently selected
channel. The Channels List Box of the XM Radio Page shows a list of the available
channels for the selected category.
Selecting a channel from the channel list
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
View Airport Directory Information
1)
While on the ‘Aux - XM Radio’ Page, select the Channel Softkey.
2)
Select the CH + Softkey to go up through the list in the ‘Channels’ Box, or
move down the list with the CH – Softkey.
Annun/Alerts
Or:
1)
Press the FMS Knob to highlight the channel list and turn the large FMS
Knob to scroll through the channels.
2)
Press the ENT Key to activate the selected channel.
Index
Appendix
Selecting a channel directly:
94
1)
While on the ‘Aux-XM Radio’ Page, select the Channel Softkey.
2)
Select the Direct CH Softkey. The channel number in the ‘Active Channel’
Box is highlighted.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Additional Features
Select the numbered softkeys located on the bottom of the display to
directly select the desired channel number.
4)
Press the ENT Key to activate the selected channel.
Flight
Instruments
3)
Select the Category Softkey on the ‘Aux-XM Radio’ Page.
2)
Select the CAT + and CAT - Softkeys to cycle through the categories.
Nav/Com/
XPDR/Audio
1)
Turn the small FMS Knob to display the Categories list. Highlight the
desired category with the small FMS Knob and press the ENT Key. Selecting
All Categories places all channels in the list.
Flight
Management
Or:
Hazard
Avoidance
Setting a preset channel number
On the ‘Aux - XM Radio’ Page, while listening to an ‘Active Channel’ that
is wanted for a preset, select the Presets Softkey to access the first five
preset channels (Preset 1 - Preset 5).
2)
Select the More Softkey to access the next five channels (Preset 6
– Preset 10), and again to access the last five channels (Preset 11 –
Preset 15). Selecting the More Softkey repeatedly cycles through the
preset channels.
3)
Select any one of the (Preset 1 - Preset 15) softkeys to assign a number
to the active channel.
4)
Select the Set Softkey on the desired channel number to save the channel
as a preset.
AFCS
1)
Additional
Features
Abnormal
Operation
Annun/Alerts
Adjusting Volume
1)
EIS
Selecting a Category
The Category Box of the XM Radio Page displays the currently selected category
of audio.
With the ‘Aux - XM Radio’ Page displayed, select the Volume Softkey.
Select the VOL – Softkey to reduce volume or select the VOL + Softkey to
increase volume. (Once the VOL Softkey is selected, the volume can also be
adjusted using the small FMS Knob.)
SiriusXM Radio volume may also be adjusted on each passenger headset.
Appendix
2)
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
95
Additional Features
1)
Select the ‘Aux - XM Radio’ Page or ‘Aux - XM Information’ Page.
2)
Select the Mute Softkey to mute the audio. Select the Mute Softkey again
to unmute the audio.
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Mute SiriusXM audio
SCHEDULER
The Scheduler feature can be used to enter and display reminder messages (e.g.,
Update Databases, Switch fuel tanks, or Altimeter-Transponder Check) in the Messages Window on the PFD. Messages can be set to display based on a specific date
and time (event), once the message timer reaches zero (one-time; default setting), or
recurrently whenever the message timer reaches zero (periodic). Message timers set
to periodic alerting automatically reset to the original timer value once the message is
displayed. When power is cycled, all messages are retained until deleted, and message
timer countdown is resumed.
Entering a scheduler message
Abnormal
Operation
Additional
Features
AFCS
1) Select the ‘Aux - Utility’ Page.
2)
Press the FMS Knob momentarily to activate the flashing cursor.
3)
Turn the large FMS Knob to highlight the first empty scheduler message
naming field.
4)
Use the FMS Knob to enter the message text to be displayed in the PFD
Alerts Window and press the ENT Key.
5)
Press the ENT Key again or use the large FMS Knob to move the cursor to
the field next to ‘Type’.
6)
Turn the small FMS Knob to select set the message alert type:
Annun/Alerts
• Event—Message issued at the specified date/time
• One-time—Message issued when the message timer reaches zero
(default setting)
Index
Appendix
• Periodic—Message issued each time the message timer reaches zero
96
7)
Press the ENT Key again or use the large FMS Knob to move the cursor to
the next field.
8)
For periodic and one-time message, use the FMS Knob to enter the timer
value (HHH:MM:SS) from which to countdown and press the ENT Key.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Additional Features
For event-based messages:
a) Use the FMS Knob to enter the desired date (DD-MM-YYYY) and press
the ENT Key.
10) Press the ENT Key again or use the large FMS Knob to move the cursor to
enter the next message.
Flight
Management
Deleting a scheduler message
1) Select the ‘Aux - Utility’ Page.
3)
Turn the large FMS Knob to highlight the name field of the scheduler
message to be deleted.
4)
Press the CLR Key to clear the message text. If the CLR Key is pressed
again, the message is restored.
5)
Press the ENT Key to confirm message deletion.
AFCS
Press the FMS Knob momentarily to activate the flashing cursor.
Hazard
Avoidance
2)
Nav/Com/
XPDR/Audio
c) Use the FMS Knob to enter the desired time (HH:MM) and press the
ENT Key.
EIS
b) Press the ENT Key again or use the large FMS Knob to move the cursor
to the next field.
Flight
Instruments
9)
Annun/Alerts
Appendix
Viewing the WiFi Setup Page
Abnormal
Operation
WIFI CONNECTIONS
The optional GDL 59 Data Link provides a high speed IEEE 802.11g WiFi data
link between the aircraft and a ground computer network while the aircraft is on the
ground and located within range of the network.
Control and monitoring of Wi-Fi functions are accomplished through the ‘AuxMaintenance Wi-Fi Setup’ Page.
Additional
Features
When a scheduler message is waiting, the Messages Softkey flashes. Pressing
the Messages Softkey opens the Messages Window and acknowledges the scheduler
message. Pressing the Messages Softkey again removes the Messages Window from
the display, and the scheduler message is deleted from the message queue.
1)
Turn the large FMS Knob on the MFD to select the Aux page group.
2)
Turn the small FMS Knob to select the ‘Aux-Maintenance WiFi Setup’ Page.
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
97
Additional Features
1)
Press the Avail Softkey on the MFD. A list of available networks will be
displayed in the Available Networks window. Signal strength is shown for
each network, as well as security requirements and whether the network
has been saved in the system’s memory.
2)
If necessary, press the Rescan Softkey to have the system scan again for
available networks.
3)
Press the FMS Knob to place the cursor in the list of networks.
4)
Turn either FMS Knob to select the desired network.
5)
Press the Connect Softkey.
6)
If the network is secured, a window will be displayed in order to enter
the necessary passcode. Use the FMS Knobs to enter the desired alpha
numeric characters. Press the CapsLock Softkey to enter upper case
letters. If there is no security associated with the network, proceed to step
9.
7)
Press the ENT Key. ‘OK’ will be highlighted.
8)
Press the ENT Key again.
9)
The Save Settings window is now displayed with the cursor highlighting
‘Save Connection’.
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Setting up a new WiFi connection
10) The selected network can be saved to system memory to make reconnection easier at a later time.
Abnormal
Operation
Connecting the selected network without saving;
a) Turn the large FMS Knob to move the cursor to highlight ‘Connect’.
Annun/Alerts
b) Press the ENT Key.
Saving and connect the selected network:
a) Press the ENT Key. A checkmark is placed in the checkbox and the
cursor moves to the airport field.
Appendix
b) Using the FMS Knobs, enter an airport identifier to be associated with
the saved network. This aids in identifying the network later in the
event of duplicate network names.
Index
c) Press the ENT Key. The cursor moves to ‘Connect’.
d) Press the ENT Key again to connect to the selected network.
98
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Additional Features
Flight
Instruments
Editing a saved network
Turn either FMS Knob to highlight the network to be edited.
3)
Pressing the ENT Key at this point will check or uncheck the Auto Connect
checkbox. When a checkmark is present, the system will automatically
connect to the network when within range.
4)
Press the Edit Softkey. The cursor now appears in the Connection Settings
window.
5)
Turn the large FMS Knob to select the network attribute to be edited.
6)
Turn the small FMS Knob to begin editing the field.
7)
When the entry is complete, press the ENT Key.
8)
Turn the large FMS Knob or press the ENT Key until ‘Save’ is highlighted.
9)
Press the ENT Key.
Flight
Management
2)
Nav/Com/
XPDR/Audio
While viewing list of saved networks, press the FMS Knob to activate the
cursor.
EIS
1)
Hazard
Avoidance
Disconnecting a Wi-Fi network
AFCS
Press the DISCNCT Softkey.
Deleting a saved Wi-Fi network
2)
Turn either FMS Knob to highlight the network to be deleted.
3)
Press the Delete Softkey. The selected network is removed from the list.
Annun/Alerts
CREW PROFILES
When the system is powered on, the last selected pilot profile is shown on the MFD
power-up screen. The system can store up to 25 profiles; the currently active profile,
the amount of memory used, and the amount of memory available are shown at the
top of the System Setup page in the box labeled ‘Crew Profile’.
Abnormal
Operation
While viewing the list of saved networks, press the FMS Knob to activate
the cursor.
Additional
Features
1)
Appendix
Creating a profile:
1) Select the ‘Aux - System Setup (X)’ Page.
Press the FMS Knob momentarily to activate the flashing cursor.
Index
2)
3) Turn the large FMS Knob to highlight ‘Create’ in the Crew Profile Box.
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
99
Additional Features
Flight
Instruments
4)
5) Use the FMS Knob to enter a profile name up to 16 characters long and
6)
In the next field, use the small FMS Knob to select the desired settings
upon which to base the new profile. Profiles can be created based on
Garmin factory defaults, default profile settings (initially based on Garmin
factory defaults unless edited by the pilot), or other previously created
profile settings.
7)
Press the ENT Key.
Flight
Management
Nav/Com/
XPDR/Audio
EIS
press the ENT Key. Crew profile names cannot begin with a blank as the
first letter.
8) With ‘Create’ highlighted, press the ENT Key to create the profile
Or:
Use the large FMS Knob to select ‘Create & Activate’ and press the ENT
Key to activate the new profile.
Hazard
Avoidance
AFCS
Press the ENT Key. A ‘Create Profile’ Window is displayed.
9)
To cancel the process, select ‘Cancel’ with the large FMS Knob and press
the ENT Key.
Selecting an active profile:
1) Select the ‘Aux - System Setup (X)’ Page.
Additional
Features
2)
Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the active profile field in the ‘Crew
Profile’ Box.
Abnormal
Operation
4) Turn the small FMS Knob to display the crew profile list and highlight the
desired profile.
the selected profile.
Renaming a profile:
1) Select the ‘Aux - System Setup (X)’ Page.
Appendix
Annun/Alerts
5) Press the ENT Key. The system loads and displays the system settings for
2)
Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight ‘Rename’ in the ‘Crew Profile’ Box.
Index
4)
Press the ENT Key.
5) In the ‘Rename Profile’ Window, turn the FMS Knob to select the profile to
rename.
100
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Additional Features
Press the ENT Key.
Flight
Instruments
6)
7) Use the FMS Knob to enter a new profile name up to 16 characters long
and press the ENT Key.
8) With ‘Rename’ highlighted, press the ENT Key.
To cancel the process, use the large FMS Knob to select ‘Cancel’ and press
the ENT Key.
Nav/Com/
XPDR/Audio
Deleting a profile:
1) Select the ‘Aux - System Setup (X)’ Page.
Press the FMS Knob momentarily to activate the flashing cursor.
Flight
Management
2)
3) Turn the large FMS Knob to highlight ‘Delete’ in the ‘Crew Profile’ Box.
4)
Press the ENT Key.
delete.
Press the ENT Key.
To cancel the process, use the large FMS Knob to select ‘Cancel’ and press
AFCS
7) With ‘Delete’ highlighted, press the ENT Key.
8)
Hazard
Avoidance
5) In the ‘Delete Profile’ Window, turn the FMS Knob to select the profile to
6)
EIS
9)
the ENT Key.
Additional
Features
Importing a profile from an SD card:
3)
Press the Import Softkey.
4)
The system displays the ‘Crew Profile Importing’ Window with ‘Import’
highlighted. Turn the large FMS Knob to highlight the ‘Profile Name’ Field,
then scroll to the desired profile name with the large and small FMS Knobs,
then press the ENT Key. Then press the ENT Key with ‘Import’ highlighted.
5)
If the imported profile name is the same as an existing profile on the
system, the system displays an ‘Overwrite existing profile? OK or Cancel’
prompt. Press the ENT Key to replace profile on the system with the profile
imported from the SD card, or turn the FMS Knob to highlight ‘Cancel’ and
press the ENT Key to return to the ‘Crew Profile Importing’ Window.
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
101
Index
Turn the FMS Knob to select the ‘Aux - System Setup (X)’ Page.
Appendix
2)
Annun/Alerts
Insert an SD card containing the crew profile(s) into the top card slot on the
MFD.
Abnormal
Operation
1)
Additional Features
If successful, the system displays ‘Crew profile import succeeded.’ in the
window below. With ‘OK’ highlighted, press the ENT or CLR Keys or press
the FMS Knob to return to the ‘Aux - System Setup (X)’ Page. The imported
profile becomes the active profile.
Exporting a profile to an SD card:
1)
Insert the SD card for storing the Crew Profile into the top card slot on the
MFD.
2)
Turn the FMS Knob to select the ‘Aux - System Setup (X)’ Page.
3)
Press the Export Softkey. The system displays the ‘Crew Profile Exporting’
Window.
4)
To export the crew profile using the current selected profile, press the ENT
Key with ‘Export’ highlighted. To change the selected profile, turn the large
FMS Knob to highlight the ‘Profile Name’ ield, then scroll to the desired
profile name with the large and small FMS Knobs, then press the ENT Key.
Then press the ENT Key with ‘Export’ highlighted.
5)
If the selected profile to be exported is the same as an existing profile file
name on the SD card, the system displays an ‘Overwrite existing profile?
OK or Cancel’ prompt. Press the ENT Key to replace the profile on the SD
card with the profile to be exported, or turn the FMS Knob to highlight
‘Cancel’ and press the ENT Key to return to the ‘Pilot Profile Exporting’
Window without exporting the profile.
6)
If successful, the window displays ‘Crew profile export succeeded.’ With
‘OK’ highlighted, press the ENT or CLR Keys, or press the FMS Knob to
return to the ‘Aux - System Setup (X)’ Page.
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
6)
102
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Additional Features
Flight
Management
Turn the small FMS Knob to select the Connext Setup page.
Hazard
Avoidance
2)
Nav/Com/
XPDR/Audio
Turn the large FMS Knob on the MFD to select the Aux page group.
EIS
Viewing the Connext Setup Page
1)
Flight
Instruments
CONNEXT SETUP
The Connext Setup Page allows for setting up the installed optional Flight Stream
device, or an optional GTX 345R transponder, for a Bluetooth connection between the
system and a mobile device running the Garmin Pilot™ application.
The mobile device must be ‘paired’ with the system in order to use the various
functions. Pairing is accomplished by first placing the system in pairing mode by
displaying the Connext Setup Page. The system is ‘discoverable’ whenever this page is
displayed. The pairing operation is completed from the mobile device and the Garmin
Pilot application. See the device Bluetooth pairing instructions and the connection
instructions in the Garmin Pilot application.
Changing the Bluetooth Name
2)
Turn the large FMS Knob to place the cursor in the ‘Bluetooth Name’ field.
3)
Enter the desired name by using the large FMS Knob to select the character
field, and the small FMS Knob select the desired alphanumeric character
for that field.
4)
Press the ENT Key. The cursor is removed and the new name is displayed.
2)
Turn the large FMS Knob to place the cursor in the ‘Flight Plan Import’
field.
3)
Turn the small FMS Knob to select ‘Enabled’ or ‘Disabled’.
4)
Press the FMS Knob to remove the cursor.
Appendix
While viewing the Connext Setup Page, press the FMS Knob to activate the
cursor.
Annun/Alerts
1)
Abnormal
Operation
Enabling/Disabling Flight Plan Importing from Garmin Pilot
Additional
Features
While viewing the Connext Setup Page, press the FMS Knob to activate the
cursor.
AFCS
1)
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
103
Enabling/Disabling WiFi Database Importing from Garmin Pilot
1)
While viewing the Connext Setup Page, press the FMS Knob to activate the
cursor.
2)
Turn the large FMS Knob to place the cursor in the ‘WiFi Database Import’
field.
3)
Turn the small FMS Knob to select ‘Enabled’ or ‘Disabled’.
4)
Press the FMS Knob to remove the cursor.
Enabling/Disabling Automatic Reconnection of a Specific Paired Device
1)
While viewing the Connext Setup Page, press the FMS Knob to activate the
cursor.
2)
Turn the large FMS Knob to highlight the desired paired device.
3)
Turn the small FMS Knob to select ‘Enabled’ or ‘Disabled’. Selecting
‘Enabled’ allows the system to automatically connect to a previously paired
device when detected.
4)
Press the FMS Knob to remove the cursor.
Remove a Specific Paired Device from the List of Paired Devices:
1)
While viewing the Connext Setup Page, press the FMS Knob to activate the
cursor.
2)
Turn the large FMS Knob to highlight the desired paired device.
3)
Press the Remove Softkey. A confirmation screen is displayed.
4)
If necessary, turn the large FMS Knob to select ‘Yes’.
5)
Press the ENT Key to remove the device from the list of paired devices.
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Additional Features
104
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Abnormal Operation
AFCS
Additional
Features
Abnormal
Operation
HAZARD DISPLAYS WITH LOSS OF GPS POSITION
If GPS position is lost, or becomes invalid, selected hazards being displayed on the
Navigation Map Page are removed until GPS position is again established.
Hazard
Avoidance
ABNORMAL COM OPERATION
When a COM tuning failure is detected by the system, the emergency frequency
(121.500 MHz) is automatically loaded into the active frequency field of the COM
radio for which the tuning failure was detected. In the event of a failure of both PFD
and MFD, the emergency frequency (121.500 MHz) automatically becomes the active
frequency on both COM radios.
Flight
Management
NOTE: The PA-44-180 Seminole Pilot’s Operating Handbook (POH) always
takes precedence over the information found in this section.
Nav/Com/
XPDR/Audio
• PFD failure – Press the DISPLAY BACKUP Button on the audio panel to
put the MFD in reversionary mode.
• MFD failure – PFD enters reversionary mode. Reversionary display mode
can be manually activated by pressing the DISPLAY BACKUP Button on the
audio panel.
EIS
REVERSIONARY MODE
Should a system detected failure occur in either display, the system automatically
enters reversionary mode. In reversionary mode, critical flight instrumentation is
combined with engine instrumentation on the remaining display.
In the event of display failure, the display modes are as follows:
Flight
Instruments
ABNORMAL OPERATION
Annun/Alerts
Loss of Hazard Functions with Loss of GPS Position
Appendix
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
105
UNUSUAL ATTITUDES
The PFD ‘declutters’ when the aircraft enters an unusual attitude. Only the primary
functions are displayed in these situations.
The following information is removed from the PFD (and corresponding softkeys
are disabled) when the aircraft experiences unusual attitudes:
• Traffic Annunciations
• AFCS Annunciations
• Flight Director
Command Bars
• Inset Map
• Temperatures
• DME Information
Window
• Wind Data
• Selected Heading Box
• Selected Course Box
• Transponder Status
Box
• System Time
• PFD Setup Menu
• Windows displayed in
the lower right corner
of the PFD:
– Timer/References
– Nearest Airports
– Flight Plan
– Messages
– Procedures
• Barometric Minimum
Descent Altitude Box
• Glideslope, Glidepath,
and Vertical Deviation
Indicators
• Altimeter Barometric
Setting
• Selected Altitude
• VNV Target Altitude
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Abnormal Operation
DEAD RECKONING
While in Enroute or Oceanic phase of flight, if the system detects an invalid GPS
solution or is unable to calculate a GPS position, the system automatically reverts to
Dead Reckoning (DR) Mode. In DR Mode, the system uses its last-known position
combined with continuously updated airspeed and heading data (when available) to
calculate and display the aircraft’s current estimated position.
Index
Appendix
Annun/Alerts
Extreme Pitch Indication
106
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Abnormal Operation
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance
AFCS
Additional
Features
Abnormal
Operation
Annun/Alerts
DR Mode is indicated on the system by the appearance of the letters ‘DR’
superimposed in yellow over the ‘own aircraft’ symbol as shown in the following
figure. In addition, ‘DR’ is prominently displayed, also in yellow, on the HSI slightly
above and to the right of the aircraft symbol on the CDI as shown in the following
figure. The CDI deviation bar is displayed in yellow, but will be removed from the
display after 20 minutes. Lastly, but at the same time, a ‘GPS NAV LOST’ alert message
appears on the PFD.
Normal navigation using GPS/SBAS source data resumes automatically once a valid
GPS solution is restored.
It is important to note that estimated navigation data supplied by the system in
DR Mode may become increasingly unreliable and must not be used as a sole means
of navigation. If, while in DR Mode, airspeed and/or heading data is also lost or
not available, the DR function may not be capable of estimating your position and,
consequently, the system may display a path that is different than the actual movement
of the aircraft. Estimated position information displayed by the system through
DR while there is no heading and/or airspeed data available should not be used for
navigation.
DR Mode is inherently less accurate than the standard GPS/SBAS Mode due to the
lack of satellite measurements needed to determine a position. Changes in wind speed
and/or wind direction compounds the relative inaccuracy of DR Mode. Because of this
degraded accuracy, the crew must maintain position awareness using other navigation
equipment until GPS-derived position data is restored.
Flight
Instruments
NOTE: Dead Reckoning Mode only functions in Enroute (ENR) or Oceanic
(OCN) phase of flight. In all other phases, an invalid GPS solution produces
a “NO GPS POSITION” annunciation on the map and the system stops
navigating in GPS Mode.
Appendix
Symbolic Aircraft
(Map pages and Inset Map)
Index
CDI ‘DR’ Indication on PFD
Dead Reckoning Indications
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
107
As a result of operating in DR Mode, all GPS-derived data is computed based upon
an estimated position and is displayed as yellow text on the display to denote degraded
navigation source information. This data includes the following:
• Navigation Status Box fields except Active Leg, TAS, and DTK
• GPS Bearing Pointer
• Wind data and pointers in the Wind Data Box on the PFD
• Current Track Indicator
• All Bearing Pointer Distances
• Active Flight Plan distances, bearings, and ETE values
Also, while the system is in DR Mode, the autopilot will couple to GPS for up
to 20 minutes. Terrain Proximity, TERRAIN-SVS, and TAWS-B are also disabled.
Additionally, the accuracy of all nearest information (airports, airspaces, and
waypoints) is questionable. Finally, airspace alerts continue to function, but with
degraded accuracy.
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Abnormal Operation
108
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Annunciations & Alerts
Flight
Instruments
ANNUNCIATIONS & ALERTS
G1000 SYSTEM ANNUNCIATIONS
Comment
Flight
Management
Air Data, Attitude and Heading Reference System is aligning. Note,
display reads “AHRS” for an ADAHRS system.
Nav/Com/
XPDR/Audio
System Annunciation
EIS
When an LRU or an LRU function fails, a large red “X” is typically displayed on
windows associated with the failed data. Refer to the PA-44-180 Seminole Pilot’s
Operating Handbook (POH) for additional information regarding pilot responses to
these annunciations
Hazard
Avoidance
AFCS
Display system is not receiving attitude information from the
ADAHRS.
Additional
Features
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
Display system is not receiving valid transponder information.
Appendix
Display system is not receiving valid heading input from the
ADAHRS or magnetometer.
Annun/Alerts
GPS information is either not present or is invalid for navigation
use.
Note that ADAHRS utilizes GPS inputs during normal operation.
ADAHRS operation may be degraded if GPS signals are not present
(see POH).
Abnormal
Operation
AHRS calibration incomplete or configuration module failure. Note,
display reads “AHRS” for an ADAHRS system.
109
System Annunciation
Comment
Display system is not receiving airspeed input from the ADAHRS.
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Annunciations & Alerts
Hazard
Avoidance
Flight
Management
Display system is not receiving altitude input from the ADAHRS.
AFCS
Display system is not receiving vertical speed input from the
ADAHRS.
Display system is not receiving valid ISA information from the
ADAHRS.
Other Various Red or Amber
‘X’ Indications
A red or amber ‘X’ through any other display field (such as engine
instrumentation display) indicates that the field is not receiving
valid data.
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
Display system is not receiving valid OAT information from the
ADAHRS.
110
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Annunciations & Alerts
Warning Messages
GEAR SYS
Additional
Features
Abnormal
Operation
USP ACTIVE
Repeating Triple
Chime
AFCS
R START ENGD
Landing gear are not down and locked
or
Landing gear is selected UP on the ground
The CO Guardian has detected high levels of carbon
monoxide
A failure of a gear system component has been
detected
Heater unit has sensed an overheat condition
Left Alternator failure
Left engine CHT in warning range
Left fuel quantity in warning range
Left starter motor energized when engine is running
Right Alternator failure
Right engine CHT in warning range
Right fuel quantity in warning range
Right starter motor energized when engine is
running
Underspeed protection is currently engaged
Hazard
Avoidance
HTR OVERHEAT
L ALTR FAIL
L ENG CHT
L FUEL QTY
L START ENGD
R ALTR FAIL
R ENG CHT
R FUEL QTY
Audio Alert
Flight
Management
CO LVL HIGH
Description
Nav/Com/
XPDR/Audio
CHECK GEAR
EIS
WARNING Annunciations
Flight
Instruments
CAS ANNUNCIATIONS
The following annunciations are configured specifically for the PA-44-180 Seminole
aircraft. See the PA-44-180 Seminole POH for information regarding pilot responses.
Annun/Alerts
Appendix
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
111
Flight
Instruments
Annunciations & Alerts
Caution Annunciations
Caution Messages
AC DOOR OPEN*
EIS
CHECK GEAR
Nav/Com/
XPDR/Audio
CO LVL HIGH*
GEAR SYS
Hazard
Avoidance
Flight
Management
HYDR PUMP ON
L FUEL QTY
PITOT HEAT FAIL
PITOT HEAT OFF
R FUEL QTY
Description
Audio Alert
Air conditioning condenser door is open during inflight engine failure condition
Landing gear are not down and locked
The CO Guardian has detected high levels of carbon
monoxide
A failure of a gear system component has been
detected
Hydraulic pump is running when it should not be
running
Left fuel quantity in caution range
Pitot heat failure
Pitot heat selected OFF
Right fuel quantity in caution range
Double Chime
* Optional
Advisory Messages
AC DOOR OPEN*
AV FAN FAIL
EMERG BATT ON
FUEL IMBAL
MAINT MODE ON
MFD FAN FAIL
PFD FAN FAIL
Description
Audio Alert
Air conditioning condenser door is open
Avionics fan fail
Emergency power in use
Fuel imbalance (left vs. right tank quantity)
Maintenance Mode ON
MFD display fan is inoperative
PFD display fan is inoperative
Single Chime
* Optional
MESSAGE ADVISORIES
Alerts Window Text
WOW MISCOMPARE
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Advisory Annunciations
CO DET SRVC*
Description
Left and right squat switches do not agree
The carbon monoxide detector needs service
Index
* Optional
112
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Annunciations & Alerts
Flight
Instruments
TERRAIN-SVT ALERTS
WARNING - TERRAIN
“Warning; Terrain,
Terrain”
Imminent Terrain Impact
Warning (ITI)
TERRAIN
WARNING - TERRAIN
“Warning; Terrain,
Terrain”
Reduced Required Obstacle
Clearance Warning (ROC)
TERRAIN
WARNING - OBSTACLE
“Warning; Obstacle,
Obstacle”
Imminent Obstacle Impact
Warning (IOI)
TERRAIN
WARNING - OBSTACLE
“Warning; Obstacle,
Obstacle”
Reduced Required Terrain
Clearance Caution (RTC)
TERRAIN
CAUTION - TERRAIN
“Caution; Terrain,
Terrain”
Imminent Terrain Impact
Caution (ITI)
TERRAIN
CAUTION - TERRAIN
“Caution; Terrain,
Terrain”
Reduced Required Obstacle
Clearance Caution (ROC)
TERRAIN
CAUTION - OBSTACLE
“Caution; Obstacle,
Obstacle”
Imminent Obstacle Impact
Caution (IOI)
TERRAIN
CAUTION - OBSTACLE
“Caution; Obstacle,
Obstacle”
Additional
Features
* Annunciation is displayed on the MFD when terrain display is enabled.
TERRAIN-SVT SYSTEM STATUS ANNUNCIATIONS
TER TEST
TERRAIN TEST
None
None
None
“Terrain
System Test
OK”
Terrain Alerting Inhibited
TER INH
None
None
No GPS position
TER N/A
NO GPS POSITION
“Terrain
System Not
Available”*
System Test in Progress
System Test Pass
Appendix
Voice Alert
Annun/Alerts
Terrain-SVT Page Center
Banner Annunciation
Abnormal
Operation
PFD/MFD†
Alert
Annunciation
Alert Type
AFCS
TERRAIN
Hazard
Avoidance
Reduced Required Terrain
Clearance Warning (RTC)
Flight
Management
Voice Alert
Nav/Com/
XPDR/Audio
MFD
Pop-Up Alert (except
Terrain-SVT Page)
EIS
PFD/MFD* Alert
Annunciation
Alert Type
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
113
Annunciations & Alerts
Terrain-SVT Page Center
Banner Annunciation
Voice Alert
Excessively degraded GPS signal;
or Out of database coverage
area
TER N/A
None
“Terrain
System Not
Available”*
Terrain System Test Fail; Terrain
or Obstacle database unavailable
or invalid; Invalid software
configuration; or System audio
fault
TER FAIL
TERRAIN FAIL
“Terrain
System
Failure”
MFD Terrain or Obstacle
database unavailable or invalid,
TERRAIN DATABASE FAILURE
and Terrain-SVT operating
None
None
with PFD Terrain or Obstacle
databases
† Annunciation is shown on Terrain-SVT Page and the Navigation Map Page when Terrain is enabled.
* “Terrain System Available” will be heard when sufficient GPS signal is received, or Terrain database
coverage area re-entered.
TAWS-B ALERTS
Alert Type
PFD/MFD**
TAWS Page
Annunciation
MFD Map Page
Pop-Up Alert
Voice Alert
Excessive
Descent Rate
Warning (EDR)
PULL UP
PULL-UP
“Pull Up”
PULL UP
TERRAIN - PULL-UP
or
TERRAIN AHEAD - PULL-UP
“Terrain, Terrain; Pull Up,
Pull Up”
or
“Terrain Ahead, Pull Up;
Terrain Ahead, Pull Up”
PULL UP
TERRAIN AHEAD - PULL-UP
or
TERRAIN - PULL-UP
“Terrain Ahead, Pull Up;
Terrain Ahead, Pull Up”
or
“Terrain, Terrain; Pull Up,
Pull Up”
Reduced
Required
Terrain
Clearance
Warning (RTC)
Imminent
Terrain Impact
Warning (ITI)
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Alert Type
PFD/MFD†
Alert
Annunciation
114
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Annunciations & Alerts
MFD Map Page
Pop-Up Alert
Voice Alert
PULL UP
OBSTACLE - PULL-UP
or
OBSTACLE AHEAD - PULL-UP
“Obstacle, Obstacle; Pull
Up, Pull Up”
or
“Obstacle Ahead, Pull Up;
Obstacle Ahead, Pull Up”
PULL UP
OBSTACLE AHEAD - PULL-UP
or
OBSTACLE - PULL-UP
“Obstacle Ahead, Pull Up;
Obstacle Ahead, Pull Up”
or
“Obstacle, Obstacle; Pull
Up, Pull Up”
TERRAIN
CAUTION - TERRAIN
or
TERRAIN AHEAD
“Caution, Terrain;
Caution, Terrain”
or
“Terrain Ahead; Terrain
Ahead”
TERRAIN
TERRAIN AHEAD
or
CAUTION - TERRAIN
“Terrain Ahead; Terrain
Ahead”
or
“Caution, Terrain;
Caution, Terrain”
TERRAIN
CAUTION - OBSTACLE
or
OBSTACLE AHEAD
“Caution, Obstacle;
Caution, Obstacle”
or
“Obstacle Ahead;
Obstacle Ahead”
Imminent
Obstacle
Impact Caution
(IOI)
TERRAIN
OBSTACLE AHEAD
or
CAUTION - OBSTACLE
“Obstacle Ahead;
Obstacle Ahead”
or
“Caution, Obstacle;
Caution, Obstacle”*
Premature
Descent Alert
Caution (PDA)
TERRAIN
TOO LOW - TERRAIN
“Too Low, Terrain”
Altitude Voice
Callout (VCO)
“500”
None
None
“Five-Hundred”
Excessive
Descent Rate
Caution (EDR)
TERRAIN
SINK RATE
“Sink Rate”
Abnormal
Operation
Annun/Alerts
Appendix
Index
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Additional
Features
190-02199-01 Rev. A
AFCS
Reduced
Required
Obstacle
Clearance
Caution (ROC)
Hazard
Avoidance
Imminent
Terrain Impact
Caution (ITI)
Flight
Management
Reduced
Required
Terrain
Clearance
Caution (RTC)
Nav/Com/
XPDR/Audio
Imminent
Obstacle
Impact
Warning (IOI)
EIS
Reduced
Required
Obstacle
Clearance
Warning (ROC)
Flight
Instruments
PFD/MFD**
TAWS Page
Annunciation
Alert Type
115
EIS
Flight
Instruments
Annunciations & Alerts
Alert Type
PFD/MFD**
TAWS Page
Annunciation
MFD Map Page
Pop-Up Alert
Voice Alert
Negative Climb
Rate Caution
(NCR)
TERRAIN
DONT SINK
or
TOO LOW - TERRAIN
“Don’t Sink”*
or
“Too Low, Terrain”
TAWS-B SYSTEM STATUS ANNUNCIATIONS
PFD/MFD Alert
Annunciation†
TAWS-B Page Annunciation
Voice Alert
TAWS TEST
TAWS TEST
None
None
None
“TAWS System
Test OK”
TAWS-B FLTA Alerting
Inhibited
TAWS INH
None
None
No GPS position
TAWS N/A
NO GPS POSITION
“TAWS Not
Available”*
Excessively degraded GPS
signal; or Out of database
coverage area
TAWS N/A
None
“TAWS Not
Available”*
TAWS-B System Test
Fail; Terrain or Obstacle
database unavailable or
invalid; Invalid software
configuration; or System
audio fault
TAWS FAIL
TAWS FAIL
“TAWS System
Failure”
MFD Terrain or Obstacle
database unavailable or
invalid. TAWS operating
with PFD Terrain or
Obstacle databases
None
TERRAIN DATABASE FAILURE
None
Alert Type
System Test in progress
System Test pass
† Annunciation is shown on TAWS-B Page and the Navigation Map Page when Terrain is enabled.
* “TAWS Available” will be heard when sufficient GPS signal is received, or Terrain database
coverage area re-entered.
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
** Annunciation is displayed on the MFD when terrain display is enabled.
116
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Annunciations & Alerts
Traffic Map Page Center
Banner Annunciation
NO DATA
Flight
Instruments
TIS SYSTEM STATUS
Description
EIS
Data is not being received from the transponder*
Data is being received from the transponder, but a failure is
detected in the data stream*
DATA FAILED
Nav/Com/
XPDR/Audio
FAILED
The transponder has failed*
UNAVAILABLE
TIS is unavailable or out of range
Description
TRFC FAIL
Data is not being received from
the transponder*
OPERATING
None
TIS is operating and is receiving
traffic data from a data link.
OPERATING
UNAVAILABLE
TIS is operating, but the traffic
service is currently unavailable or
is out of reception range.
STANDBY
STANDBY
TIS is in Standby Mode.
UNIT FAILED
TRFC FAIL
The transponder has failed*
Annun/Alerts
NO DATA
Abnormal
Operation
Data is being received from
the transponder, but a failure is
detected in the data stream*
Additional
Features
TRFC FAIL
AFCS
DATA FAILED
Hazard
Avoidance
Traffic
Traffic Map
Traffic Overlay
Map Mode Center Banner
Status Icon
Annunciation Annunciation (Navigation Maps)
Flight
Management
* Contact a service center or Garmin dealer for corrective action
Appendix
* Contact a service center or Garmin dealer for corrective action
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
117
TIS TRAFFIC STATUS ANNUNCIATIONS
Traffic Status Banner
Annunciation
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Annunciations & Alerts
Description
TA OFF SCALE
A Traffic Advisory is outside the selected display range*
Annunciation is removed when traffic comes within the selected
display range
TA X.X ± XX ↕
System cannot determine bearing of Traffic Advisory**
Annunciation indicates distance in nm, altitude separation in hundreds
of feet, and altitude trend arrow (climbing/descending)
AGE MM:SS
Appears if traffic data is not refreshed within 6 seconds
If after another 6 seconds data is not received, traffic is removed from
the display
The quality of displayed traffic information is reduced as the age
increases
TRFC COAST
The displayed data is not current (6 to 12 seconds since last message)
The quality of displayed traffic information is reduced when this
message is displayed
TRFC RMVD
Traffic is removed because it is too old for coasting (12 to 60 seconds
since last message)
Traffic may exist within the selected display range, but it is not
displayed
TRFC FAIL
Traffic data has failed
NO TRFC DATA
Traffic has not been detected
TRFC UNAVAIL
The traffic service is unavailable or out of range
*Shown as symbol on Traffic Map Page
**Shown in center of Traffic Map Page
TAS TRAFFIC MODES
Mode
Traffic Mode Annunciation
(Traffic Map Page)
Traffic System
Test Initiated
TEST
(‘TEST MODE’ shown in center of page)
Operating
118
Traffic Display Status Icon
(Other Maps)
OPERATING
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Annunciations & Alerts
Traffic Display Status Icon
(Other Maps)
STANDBY
(also shown in white in center of page)
Standby
Flight
Instruments
Traffic Mode Annunciation
(Traffic Map Page)
Mode
EIS
Traffic System
Failed*
FAIL
Nav/Com/
XPDR/Audio
TAS FAILURE ANNUNCIATIONS
NO DATA
Flight
Management
Traffic Map Page
Center Annunciation
Description
Data is not being received from the TAS unit
FAILED
Incorrect data format received from the TAS unit
Traffic Status Banner
Annunciation
AFCS
TAS TRAFFIC STATUS ANNUNCIATIONS
Additional
Features
Description
A Traffic Advisory is outside the selected display range*.
Annunciation is removed when traffic comes within the selected
display range.
TA X.X ± XX ↕
System cannot determine bearing of Traffic Advisory**.
Annunciation indicates distance in nm, altitude separation in hundreds
of feet, and altitude trend arrow (climbing/descending).
Annun/Alerts
TAS unit has failed (unit is self-reporting a failure or sending
incorrectly formatted data)
NO TRFC DATA
Abnormal
Operation
TA OFF SCALE
TRFC FAIL
Hazard
Avoidance
Data is being received from the TAS unit, but the unit is self-reporting
a failure
DATA FAILED
Data is not being received from the TAS unit
Appendix
*Shown as symbol on Traffic Map Page
**Shown in center of Traffic Map Page
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
119
Flight
Instruments
Annunciations & Alerts
ADS-B TRAFFIC MODES
Traffic Mode
Traffic Map Page Traffic Display
Annunciation
Center Banner
Status Icon
(Traffic Map Page) Annunciation
(Other Maps)
ADS-B System Test Initiated
ADS-B: TEST
TEST MODE
ADS-B Operating in Airborne
Mode
ADS-B: AIRB
None
ADS-B Operating in Surface
Mode
ADS-B: SURF
None
ABS-B Traffic Off
ADS-B: OFF
ADS-B TRFC OFF
ADS-B Traffic Not Available
ADS-B: N/A
ADS-B TRFC N/A
ADS-B Failed*
ADS-B: FAIL
ADS-B TRFC FAIL
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
ADS-B Mode
Additional
Features
ADS-B TRAFFIC FAILURE ANNUNCIATIONS
Traffic Map Page
Center Annunciation
Appendix
Annun/Alerts
Abnormal
Operation
NO DATA
DATA FAILED
FAILED
Description
Data is not being received from the traffic unit
Data is being received from the traffic unit, but the unit is selfreporting a failure
Incorrect data format received from the traffic unit
ADS-B TRAFFIC STATUS ANNUNCIATIONS
Traffic Status Banner
Annunciation
Index
TA OFF SCALE
120
Description
A Traffic Advisory is outside the selected display range*.
Annunciation is removed when traffic comes within the selected
display range.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Annunciations & Alerts
TA X.X ± XX ↕
System cannot determine bearing of Traffic Advisory**.
Annunciation indicates distance in nm, altitude separation in hundreds
of feet, and altitude trend arrow (climbing/descending).
Traffic unit has failed (unit is self-reporting a failure or sending
incorrectly formatted data)
TRFC FAIL
Nav/Com/
XPDR/Audio
NO TRFC DATA
Data is not being received from the traffic unit
*Shown as symbol on Traffic Map Page
**Shown in center of Traffic Map Page
Flight
Management
‘AUX-ADS-B STATUS’ PAGE MESSAGES
On
Description
Traffic application is currently on. Required input data
is available, and it meets performance requirements.
Available to Traffic application is not currently active, but applicaRun
tion is ready to run when condition(s) determine the
application should be active. Required input data is
available, and it meets performance requirements.
Fault
Traffic application is not available. Required input
data is not available or the application has failed.
Available
The system is receiving the ADS-R coverage from an
FAA ground station.
Not Available
The system is not receiving the ADS-R coverage from
an FAA ground station.
--------------
ADS-R coverage is invalid or unknown.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
Traffic application status is invalid or unknown.
Appendix
TIS-B/ADS-R Coverage
---------------
Annun/Alerts
Not Config- Traffic application is not available, because it has not
ured
been configured. If this annunciation persists, the
system should be serviced.
Abnormal
Operation
Traffic application is not available. Required input
data is available, but it does not meet performance
requirements.
Additional
Features
Not Available
AFCS
Traffic Application Status:
Airborne (AIRB), Surface
(SURF), Airborne Alerts (CSA)
Status
Message
Hazard
Avoidance
ADS-B Status Page Item
190-02199-01 Rev. A
EIS
Description
Flight
Instruments
Traffic Status Banner
Annunciation
121
ADS-B Status Page Item
GPS Status: GPS Source
Nav/Com/
XPDR/Audio
Ground Uplink Status: Last
Uplink
The GPS source is invalid or unknown.
Number of Displays the number of minutes since the last uplink
minutes, or from a ground station occurred. If no uplink has
‘------’
been received, or the status is invalid, dashes appear
instead of the number of minutes.
GDL 69 SXM DATA LINK RECEIVER MESSAGES
Message
Message Location
CHECK ANTENNA
XM Information Page
(MFD)
Data Link Receiver antenna
error; service required
UPDATING
XM Information Page
(MFD))
Data Link Receiver updating
encryption code
NO SIGNAL
XM Information Page
Weather Datalink Page
(MFD)
Loss of signal; signal strength
too low for receiver
LOADING
XM Radio Page (MFD)
Acquiring channel audio or
information
OFF AIR
XM Radio Page (MFD)
Channel not in service
--------
XM Radio Page (MFD)
Missing channel information
WEATHER DATA LINK FAILED
Weather Datalink Page
(MFD)
No communication from Data
Link Receiver within last 5
minutes
ACTIVATION REQUIRED
XM Information Page
(MFD)
Sirius XM subscription is not
activated
DETECTING ACTIVATION
Weather Datalink Page
(MFD)
Sirius XM subscription is
activating.
WAITING FOR DATA...
Weather Datalink Page
(MFD)
Sirius XM subscription
confirmed downloading
weather data.
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Description
External #1 The system is using the #1 GPS receiver for the GPS
position source.
---------
Index
Appendix
Annun/Alerts
Status
Message
External #2 The system is using the #2 GPS receiver for the GPS
position source.
EIS
Flight
Instruments
Annunciations & Alerts
122
Description
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Annunciations & Alerts
Message
Priority
Flight
Instruments
VOICE ALERTS
Description
AFCS
Comments
Abort approach due to loss of GPS navigation.
ADC1 ALT EC – ADC1 altitude
error correction is unavailable.
GDC 1 is reporting that the altitude error correction is
unavailable.
ADC1 AS EC – ADC1 airspeed
error correction is unavailable.
The AHRS is reporting that the airspeed error correction is
unavailable.
AHRS1 CAL – AHRS1 calibration
version error. Srvc req’d.
The AHRS calibration version error. The system should be
serviced.
AHRS1 CONFIG – AHRS1 config
error. Config service req’d.
AHRS configuration settings do not match those of backup
configuration memory. The system should be serviced.
AHRS1 GPS – AHRS1 using
backup GPS source.
The AHRS is using the backup GPS path. Primary GPS path
has failed. The system should be serviced when possible.
AHRS1 GPS – AHRS1 not
receiving any GPS information.
The AHRS is not receiving any or any useful GPS information.
Check POH limitations. The system should be serviced.
Additional
Features
ABORT APR – Loss of GPS
navigation. Abort approach.
Abnormal
Operation
Annun/Alerts
Index
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Appendix
AHRS1 GPS – AHRS1 not
The AHRS is not receiving backup GPS information. The
receiving backup GPS information. system should be serviced.
190-02199-01 Rev. A
Hazard
Avoidance
Message Advisory
Flight
Management
SYSTEM MESSAGE ADVISORIES
Nav/Com/
XPDR/Audio
Imminent stall is sensed by stall vane
Airspeed exceeds VNE
Warning
Aircraft has descended below the preset barometric minimum
“Minimums, minimums”
descent altitude
“Traffic”
TIS Traffic Alert
“Traffic, (distance, bearing, Caution
TAS Traffic Alert
altitude)”
“TAS System Test Passed”
TAS system initiated test passed
“TAS System Test Failed”
TAS system initiated test failed
Aircraft is one minute from Top of Descent. Issued only when
“Vertical track”
Advisory
vertical navigation is enabled.
“TIS Not Available”
Aircraft is outside TIS coverage area
“Timer Expired”
Countdown timer on the PFD has reached zero
EIS
“Stall”
“Airspeed”
123
Message Advisory
Comments
AHRS1 GPS – AHRS1 operating
exclusively in no-GPS mode.
The AHRS is operating exclusively in no-GPS mode. The
system should be serviced.
AHRS1 SERVICE – AHRS1
Magnetic-field model needs
update.
The AHRS earth magnetic field model is out of date. Update
magnetic field model when practical.
AHRS1 TAS – AHRS1 not receiving The AHRS is not receiving true airspeed from the air data
airspeed.
computer. The AHRS relies on GPS information to augment
the lack of airspeed. The system should be serviced.
APR DWNGRADE – Approach
downgraded.
Use LNAV minima when approach is downgraded.
ARSPC AHEAD – Airspace ahead
less than 10 minutes.
Special use airspace is ahead of aircraft. The aircraft will
penetrate the airspace within 10 minutes.
ARSPC NEAR – Airspace near –
less than 2 nm.
Special use airspace is within 2 nm of the aircraft position.
ARSPC NEAR – Airspace near and
Special use airspace is near and ahead of the aircraft position.
ahead.
APR INACTV – Approach is not
active.
The system notifies the pilot that the loaded approach is not
active. Activate approach when required.
CHECK CRS – Database course
for LOC2 / [LOC ID] is [CRS]°.
Selected course for LOC2 differs from published localizer
course by more than 10 degrees.
CNFG MODULE – PFD1
configuration module is
inoperative.
The PFD1 configuration module backup memory has failed.
The system should be serviced.
CO DET FAIL – The carbon
monoxide detector is inoperative.
A failure in the carbon monoxide detector has been detected.
The system should be serviced.
COM1 CONFIG – COM1 config
error. Config service req’d.
The COM1 configuration settings do not match backup
configuration memory. The system should be serviced
COM1 MANIFEST –
COM1 software mismatch,
communication halted.
COM1 software mismatch. The system should be serviced.
COM1 PTT – COM1 push-to-talk
key is stuck.
The COM1 external push-to-talk switch is stuck in the enable
(or “pressed”) position. Press the PTT switch again to cycle
its operation.
If the problem persists, the system should be serviced.
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Annunciations & Alerts
124
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Annunciations & Alerts
Comments
COM1 SERVICE – COM1 needs
service. Return unit for repair.
The system has detected a failure in COM1. COM1 may still
be usable. The system should be serviced when possible.
COM1 TEMP – COM1 over temp.
Reducing transmitter power.
The system has detected an over temperature condition in
COM1. The transmitter operates at reduced power. If the
problem persists, the system should be serviced.
COM2 CONFIG – COM2 config
error. Config service req’d.
The COM2 configuration settings do not match backup
configuration memory. The system should be serviced
COM1 MANIFEST –
COM1 software mismatch,
communication halted.
COM1 software mismatch. The system should be serviced.
COM2 PTT – COM2 push-to-talk
key is stuck.
The COM2 external push-to-talk switch is stuck in the enable
(or “pressed”) position. Press the PTT switch again to cycle
its operation.
If the problem persists, the system should be serviced.
COM2 RMT XFR – COM2 remote
transfer key is stuck.
The COM2 transfer switch is stuck in the enabled (or
“pressed”) position. Press the transfer switch again to cycle
its operation. If the problem persists, the system should be
serviced.
Annun/Alerts
This occurs when a stored flight plan contains procedures that
have been manually edited. This alert is issued only after an
navigation database update. Verify that the user-modified
procedures in stored flight plans are correct and up to date.
125
Index
DB CHANGE – Database
changed. Verify user modified
procedures.
Appendix
The pilot profile data was lost. System reverts to default pilot
profile and settings. The pilot may reconfigure the MFD & PFD
with preferred settings, if desired.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Abnormal
Operation
The copilot radios are set on mute.
DATA LOST – Pilot stored data
was lost. Recheck settings.
190-02199-01 Rev. A
Additional
Features
The system has detected an over temperature condition in
COM2. The transmitter operates at reduced power. If the
problem persists, the system should be serviced.
AFCS
COPILOT RADIOS MUTED –
Copilot radios are muted.
The system has detected a failure in COM2. COM2 may still
be usable. The system should be serviced when possible.
Hazard
Avoidance
COM2 TEMP – COM2 over temp.
Reducing transmitter power.
Flight
Management
COM2 SERVICE – COM2 needs
service. Return unit for repair.
Nav/Com/
XPDR/Audio
The COM1 transfer switch is stuck in the enabled (or
“pressed”) position. Press the transfer switch again to cycle
its operation. If the problem persists, the system should be
serviced.
EIS
COM1 RMT XFR – COM1 remote
transfer key is stuck.
Flight
Instruments
Message Advisory
Message Advisory
This occurs when a stored flight plan contains an airway that
is no longer consistent with the navigation database. This
alert is issued only after an navigation database update.
Verify use of airways in stored flight plans and reload airways
as needed.
DB MISMATCH – Navigation
database mismatch. Xtalk is off.
The PFD and MFD have different navigation database versions
or types installed. Crossfill is off. Check the AUX-System Status
Page to determine versions or regions. Also, check the AUXSystem Status Page for a database synchronization function
not completed. After synchronization is complete, power must
be turned off, then on.
DB MISMATCH – Obstacle
database mismatch.
The PFD and MFD have different obstacle database versions
or types installed. Check the AUX-System Status Page to
determine versions or regions. Also, check the AUX-System
Status Page for a database synchronization function not
completed. After synchronization is complete, power must be
turned off, then on.
DB MISMATCH – Standby
Navigation database mismatch.
The PFD and MFD have different standby navigation database
versions or types installed. Check the AUX-System Status
Page to determine versions or regions. Also, check the AUXSystem Status Page for a database synchronization function
not completed. After synchronization is complete, power must
be turned off, then on.
DB MISMATCH – Terrain
database mismatch.
The PFD and MFD have different terrain database versions
or types installed. Check the AUX-System Status Page to
determine versions or regions. Also, check the AUX-System
Status Page for a database synchronization function not
completed. After synchronization is complete, power must be
turned off, then on.
DIG GMA1 MANIFEST – DIG
GMA 1 software mismatch,
communication halted.
The digital audio controller has incorrect software installed.
The system should be serviced.
DME CHECK RANGE – DME
range disagreement. Check
position sensors.
A failure or disagreement has been detected in a DME
receiver. Check position sensors.
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance
AFCS
Additional
Features
Abnormal
Operation
Annun/Alerts
Appendix
Index
Comments
DB CHANGE – Database
changed. Verify stored airways.
EIS
Flight
Instruments
Annunciations & Alerts
FAILED PATH – A data path has
failed.
126
A data path connected to the GDU or the GIA 63W has failed.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Annunciations & Alerts
Comments
G/S2 FAIL – G/S2 is inoperative.
A failure has been detected in glideslope receiver 2. The
system should be serviced.
G/S2 SERVICE – G/S2 needs
service. Return unit for repair.
A failure has been detected in glideslope receiver 2. The
receiver may still be available. The system should be serviced
when possible.
GDL59 CONFIG – GDL 59 config
error. Config service req’d.
GDL 59 configuration settings do not match those of backup
configuration memory. The system should be serviced.
GDL59 FAIL – GDL 59 has failed.
A fault has been detected in the GDL 59. The receiver is
unavailable. The system should be serviced.
GDL59 RTR FAIL – The GDL 59
router has failed.
A fault has been detected in the GDL 59 router. The system
should be serviced.
GDL59 SERVICE – GDL 59 needs
service. Return unit for repair.
A fault has been detected in the GDL 59. The system should
be serviced.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
127
Index
190-02199-01 Rev. A
Appendix
GDC 1 has incorrect software installed. The system should be
serviced.
Annun/Alerts
GDC1 MANIFEST – GDC1
software mismatch,
communication halted.
Abnormal
Operation
A failure has been detected in glideslope receiver 1. The
receiver may still be available. The system should be serviced
when possible.
Additional
Features
G/S1 SERVICE – G/S1 needs
service. Return unit for repair.
AFCS
A failure has been detected in glideslope receiver 1. The
system should be serviced.
Hazard
Avoidance
G/S1 FAIL – G/S1 is inoperative.
Flight
Management
Upon power-up, the system detects that a stored flight plan
waypoint is locked. This occurs when an navigation database
update eliminates an obsolete waypoint. The flight plan
cannot find the specified waypoint and flags this message.
This can also occur with user waypoints in a flight plan that
is deleted.
Remove the waypoint from the flight plan if it no longer exists
in any database,
OR
update the waypoint name/identifier to reflect the new
information.
Nav/Com/
XPDR/Audio
FPL WPT LOCK – Flight plan
waypoint is locked.
EIS
FPL TRUNC – Flight plan has been This occurs when a newly installed navigation database
truncated.
eliminates an obsolete approach or arrival used by a stored
flight plan. The obsolete procedure is removed from the flight
plan. Update flight plan with current arrival or approach.
Flight
Instruments
Message Advisory
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Annunciations & Alerts
Message Advisory
Comments
GDL69 CONFIG – GDL 69 config
error. Config service req’d.
GDL 69/69A SXM configuration settings do not match those
of backup configuration memory. The system should be
serviced.
GDL69 FAIL – GDL 69 has failed.
A failure has been detected in the GDL 69/69A or GDL
69/69A SXM. The receiver is unavailable. The system should
be serviced.
GDL69 MANIFEST –
GDL software mismatch,
communication halted.
The GDL 69/69A SXM has incorrect software installed. The
system should be serviced.
GEA1 CONFIG – GEA1 config
error. Config service req’d.
The #1 GEA 71 configuration settings do not match those of
backup configuration memory. The system should be serviced.
GEA1 MANIFEST – GEA1
software mismatch,
communication halted.
The #1 GEA 71 has incorrect software installed. The system
should be serviced.
GEO LIMITS – AHRS1 too
far North/South, no magnetic
compass.
The aircraft is outside geographical limits for approved AHRS
operation. Heading is flagged as invalid.
GFC MANIFEST – GFC software
mismatch, communication halted.
Incorrect servo software is installed, or gain settings are
incorrect.
GIA1 CONFIG – GIA1 audio
config error. Config service req’d.
The GIA1 have an error in the audio configuration. The
system should be serviced.
GIA1 CONFIG – GIA1 config error. The GIA1 configuration settings do not match backup
Config service req’d.
configuration memory. The system should be serviced.
GIA1 COOLING – GIA1
temperature too low.
The GIA1 and/or GIA2 temperature is too low to operate
correctly. Allow units to warm up to operating temperature.
GIA1 COOLING – GIA1 over
temperature.
The GIA1 temperature is too high. If problem persists, the
system should be serviced.
GIA1 MANIFEST – GIA1 software The GIA1 1 has incorrect software installed. The system
mismatch, communication halted. should be serviced.
GIA1 SERVICE – GIA1 needs
service. Return the unit for repair.
The GIA1 self-test has detected a problem in the unit. The
system should be serviced.
GIA2 CONFIG – GIA2 audio
config error. Config service req’d.
The GIA2 have an error in the audio configuration. The
system should be serviced.
GIA2 CONFIG – GIA2 config error. The GIA2 configuration settings do not match backup
Config service req’d.
configuration memory. The system should be serviced.
128
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Annunciations & Alerts
Comments
The GIA2 temperature is too high. If problem persists, the
system should be serviced.
GIA2 COOLING – GIA2
temperature too low.
The GIA2 temperature is too low to operate correctly. Allow
units to warm up to operating temperature.
EIS
GIA2 COOLING – GIA2 over
temperature.
Flight
Instruments
Message Advisory
GIA2 MANIFEST – GIA2 software The GIA 2 has incorrect software installed. The system should
mismatch, communication halted. be serviced.
Nav/Com/
XPDR/Audio
GMA1 AUX MANIFEST – GMA
1 AUX software mismatch,
communication halted.
The digital audio controller has incorrect software installed.
The system should be serviced.
GMA1 CONFIG – GMA1 config
error. Config service req’d.
The audio panel configuration settings do not match backup
configuration memory. The system should be serviced.
GMA1 FAIL – GMA1 is
inoperative.
The audio panel self-test has detected a failure. The audio
panel is unavailable. The system should be serviced.
GMA1 SERVICE – GMA1 needs
service. Return unit for repair.
The audio panel has incorrect software installed. The system
should be serviced.
GPS NAV LOST – Loss of GPS
navigation. Position error.
Loss of GPS navigation due to position error.
GPS NAV LOST – Loss of GPS
navigation. GPS fail.
Loss of GPS navigation due to GPS failure.
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
GPS2 SERVICE – GPS2 needs
service. Return unit for repair.
A failure has been detected in the GPS1 and/or GPS2 receiver.
The receiver may still be available. The system should be
serviced.
Appendix
Loss of GPS navigation due to insufficient satellites.
Annun/Alerts
GPS NAV LOST – Loss of GPS
navigation. Insufficient satellites.
Abnormal
Operation
The GMU 44 has incorrect software installed. The system
should be serviced.
Additional
Features
The audio panel self-test has detected a problem in the unit.
Certain audio functions may still be available, and the audio
panel may still be usable. The system should be serviced when
possible.
GMU1 MANIFEST –
GMU1 software mismatch,
communication halted.
GPS1 SERVICE – GPS1 needs
service. Return unit for repair.
AFCS
GMA1 MANIFEST –
GMA1 software mismatch,
communication halted.
Hazard
Avoidance
The GIA2 self-test has detected a problem in the unit. The
system should be serviced.
Flight
Management
GIA2 SERVICE – GIA2 needs
service. Return the unit for repair.
129
Message Advisory
The AHRS has incorrect software installed. The system should
be serviced.
GTS CONFIG – GTS config error.
Config service req’d.
GTS 800 configuration settings do not match those of the
GDU configuration. The system should be serviced.
GTS MANIFEST – GTS software
mismatch, communication halted.
The GTS has incorrect software installed. The system should
be serviced.
GTX1 MANIFEST – GTX1
software mismatch,
communication halted.
The transponder has incorrect software installed. The system
should be serviced.
HDG FAULT – AHRS1
magnetometer fault has occurred.
HW MISMATCH – GIA hardware
mismatch. GIA1 communication
halted.
HW MISMATCH – GIA hardware
mismatch. GIA2 communication
halted.
A fault has occurred in the #1 GMU 44. Heading is flagged
as invalid. The AHRS uses GPS for backup mode operation.
The system should be serviced.
A GIA mismatch has been detected, where only one is SBAS
capable.
INSIDE ARSPC – Inside airspace.
The aircraft is inside the airspace.
INVALID ADM – Invalid ADM:
ATN communication halted.
Data link avionics were not configured correctly and therefore
will not be able to communicate with the ground network.
LOCKED FPL – Cannot navigate
locked flight plan.
This occurs when the pilot attempts to activate a stored flight
plan that contains locked waypoint. Remove locked waypoint
from flight plan. Update flight plan with current waypoint.
Annun/Alerts
LOI – GPS integrity lost.
Crosscheck with other NAVS.
LRG MAG VAR – Verify all course
angles.
MANIFEST – MFD1 software
mismatch, communication halted.
Index
Comments
GRS1 MANIFEST – GRS1
software mismatch,
communication halted.
Appendix
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Annunciations & Alerts
MANIFEST – PFD1 software
mismatch, communication halted.
MFD SOFTWARE – MFD
mismatch, communication halted.
130
GPS integrity is insufficient for the current phase of flight.
The GDU’s internal model cannot determine the exact
magnetic variance for geographic locations near the magnetic
poles. Displayed magnetic course angles may differ from the
actual magnetic heading by more than 2°.
The PFD and/or MFD has incorrect software installed. The
system should be serviced.
The specified GDU has different software versions installed.
The system should be serviced.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Annunciations & Alerts
Comments
MFD TERRAIN DSP – MFD Terrain One of the terrain or obstacle databases required for TAWS in
awareness display unavailable.
the specified GDU is missing or invalid.
MFD1 COOLING – MFD1 has
poor cooling. Reducing power
usage.
The MFD is overheating and is reducing power consumption
by dimming the display. If problem persists, the system
should be serviced.
MFD1 DB ERR – MFD1 Airport
Directory database error exists.
The MFD detected a failure in the Airport Directory database.
Ensure that the data card is properly inserted. Replace data
card. If problem persists, the system should be serviced.
The MFD detected a failure in the basemap database.
MFD1 DB ERR – MFD1 multiple
database errors exists.
The MFD detected a failure in more than one database. If
problem persists, the system should be serviced.
Abnormal
Operation
The MFD detected a failure in the FliteCharts database
(optional feature). Ensure that the data card is properly
inserted. Replace data card. If problem persists, the system
should be serviced.
Additional
Features
MFD1 DB ERR – MFD1
FliteCharts database error exists.
The MFD detected a failure in the obstacle database. Ensure
that the data card is properly inserted. Replace data card. If
problem persists, the system should be serviced.
MFD1 DB ERR – MFD1 obstacle
database missing.
The obstacle database is present on another LRU, but is
missing on the specified LRU.
MFD1 DB ERR – MFD1 Safe Taxi
database error exists.
The MFD detected a failure in the Safe Taxi database. Ensure
that the data card is properly inserted. Replace data card. If
problem persists, the system should be serviced.
131
Index
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Appendix
MFD1 DB ERR – MFD1 obstacle
database error exists.
Annun/Alerts
MFD1 DB ERR – MFD1 navigation The MFD detected a failure in the navigation database.
database error exists.
Attempt to reload the navigation database. If problem
persists, the system should be serviced.
190-02199-01 Rev. A
AFCS
MFD1 DB ERR – MFD1 Chartview The MFD detected a failure in the ChartView database
database error exists.
(optional feature). Ensure that the data card is properly
inserted. Replace data card. If problem persists, the system
should be serviced.
Hazard
Avoidance
MFD1 DB ERR – MFD1 basemap
database error exists.
Flight
Management
The MFD configuration settings do not match backup
configuration memory. The system should be serviced.
Nav/Com/
XPDR/Audio
MFD1 CONFIG – MFD1 config
error. Config service req’d.
EIS
MFD1 BACKLIGHT CALIBRATION The specified GDU’s backlight calibration cannot be found or
– MFD1 calibration. Return for
is invalid. The system should be serviced.
repair.
Flight
Instruments
Message Advisory
Message Advisory
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance
AFCS
Additional
Features
Abnormal
Operation
Annun/Alerts
Appendix
Index
Comments
MFD1 DB ERR – MFD1 terrain
database error exists.
The MFD detected a failure in the terrain database. Ensure
that the terrain card is properly inserted in display. Replace
terrain card. If problem persists, the system should be
serviced.
MFD1 DB ERR – MFD1 terrain
database error exists.
The MFD detected a failure in the terrain database. Ensure
that the terrain card is properly inserted in display. Replace
terrain card. If problem persists, the system should be
serviced.
MFD1 DB ERR – MFD1 terrain
database missing.
The terrain database is present on another LRU, but is missing
on the specified LRU.
MFD1 SERVICE – MFD1 needs
service. Return unit for repair.
The MFD self-test has detected a problem. The system should
be serviced.
MFD1 KEYSTK – MFD1 [key
name] is stuck.
A key is stuck on the MFD bezel. Attempt to free the stuck
key by pressing it several times. The system should be
serviced if the problem persists.
EIS
Flight
Instruments
Annunciations & Alerts
MFD1 VOLTAGE – MFD1 has low
voltage. Reducing power usage
The MFD voltage is low. The system should be serviced.
NAV1 MANIFEST – NAV1
software mismatch,
communication halted.
NAV1 software mismatch. The system should be serviced.
NAV1 RMT XFR – NAV1 remote
transfer key is stuck.
The remote NAV1 transfer switch is stuck in the enabled (or
“pressed”) state. Press the transfer switch again to cycle
its operation. If the problem persists, the system should be
serviced.
NAV1 SERVICE – NAV1 needs
service. Return unit for repair.
A failure has been detected in the NAV1 receiver. The receiver
may still be available. The system should be serviced.
NAV2 MANIFEST – NAV2
software mismatch,
communication halted.
NAV2 software mismatch. The system should be serviced.
NAV2 RMT XFR – NAV2 remote
transfer key is stuck.
The remote NAV2 transfer switch is stuck in the enabled (or
“pressed”) state. Press the transfer switch again to cycle
its operation. If the problem persists, the system should be
serviced.
NAV2 SERVICE – NAV2 needs
service. Return unit for repair.
A failure has been detected in the NAV2 receiver. The receiver
may still be available. The system should be serviced.
NON-MAGNETIC UNITS– Nonmagnetic NAV ANGLE display
units are active.
Navigation angle is not set to MAGNETIC at power-up.
132
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Annunciations & Alerts
Comments
PFD1 BACKLIGHT CALIBRATION
– PFD1 calibration lost. Return for
repair.
The PFD1 backlight calibration cannot be found or is invalid.
The system should be serviced.
PFD1 CONFIG – PFD1 config
error. Config service req’d.
The PFD configuration settings do not match backup
configuration memory. The system should be serviced.
PFD1 COOLING – PFD1 has poor
cooling. Reducing power usage.
The PFD is overheating and is reducing power consumption by
dimming the display. If problem persists, the system should
be serviced.
Nav/Com/
XPDR/Audio
The position of the selected waypoint [xxxx] is not calculated
based on the WGS84 map reference datum and may be
positioned in error as displayed. Do not use GPS to navigate
to the selected non-WGS84 waypoint..
EIS
NON WGS84 WPT – Do not use
GPS for navigation to [xxxx]
Flight
Instruments
Message Advisory
Flight
Management
The PFD detected a failure in the basemap database.
PFD1 DB ERR – PFD1 multiple
database errors exists.
The PFD detected a failure in more than one database. If
problem persists, the system should be serviced.
PFD1 DB ERR – PFD1
navigation database error exists.
The PFD detected a failure in the navigation database.
Attempt to reload the navigation database. If problem
persists, the system should be serviced.
PFD1 DB ERR – PFD1 obstacle
database missing.
The obstacle database is present on another LRU, but is
missing on the specified LRU.
PFD1 DB ERR – PFD1 Safe Taxi
database error exists.
The PFD detected a failure in the Safe Taxi database. Ensure
that the data card is properly inserted. Replace data card. If
problem persists, the system should be serviced.
PFD1 DB ERR – PFD1 terrain
database error exists.
The PFD detected a failure in the terrain database. Ensure
that the terrain card is properly inserted in display. Replace
terrain card. If problem persists, the system should be
serviced.
PFD1 DB ERR – PFD1 terrain
database missing.
The terrain database is present on another LRU, but is missing
on the specified LRU.
Annun/Alerts
PFD1 KEYSTK – PFD1 [key name]
is stuck.
A key is stuck on the PFD bezel. Attempt to free the stuck key
by pressing it several times. The system should be serviced if
the problem persists.
Appendix
Abnormal
Operation
Index
The SD card was removed from the top card slot of the
specified PFD or MFD. The SD card needs to be reinserted.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Additional
Features
190-02199-01 Rev. A
AFCS
[PFD1 or MFD1] CARD 1 REM
– Card 1 was removed. Reinsert
card.
Hazard
Avoidance
PFD1 DB ERR – PFD1 basemap
database error exists.
133
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Annunciations & Alerts
Message Advisory
Comments
[PFD1 or MFD1] CARD 2 REM
– Card 2 was removed. Reinsert
card.
The SD card was removed from the bottom card slot of the
specified PFD or MFD. The SD card needs to be reinserted.
[PFD1 or MFD1] CARD 1 ERR –
Card 1 is invalid.
The SD card in the top card slot of the specified PFD or MFD
contains invalid data.
[PFD1 or MFD1] CARD 2 ERR –
Card 2 is invalid.
The SD card in the bottom card slot of the specified PFD or
MFD contains invalid data.
PFD1 VOLTAGE – PFD1 has low
voltage. Reducing power usage
The PFD1 voltage is low. The system should be serviced.
PFD1 KEYSTK – PFD2 [key name]
is stuck.
A key is stuck on the PFD bezel. Attempt to free the stuck key
by pressing it several times. The system should be serviced if
the problem persists.
PFD1 SERVICE – PFD2 needs
service. Return unit for repair.
The PFD self-test has detected a problem. The system should
be serviced.
PFD1 TERRAIN DSP – PFD1
Terrain awareness display
unavailable.
One of the terrain or obstacle databases required for TAWS in
PFD1 is missing or invalid.
PFD1 VOLTAGE – PFD2 has low
voltage. Reducing power usage
The PFD1 voltage is low. The system should be serviced.
PILOT RADIOS MUTED – Pilot
radios are muted.
The pilot radios are set on mute.
PTK FAIL – Parallel track
unavailable: invalid leg type.
Invalid leg type for parallel offset.
PTK FAIL – Parallel track
unavailable: past IAF.
IAF waypoint for parallel offset has been passed.
PTK FAIL – Parallel track
unavailable: bad geometry.
Bad parallel track geometry.
SCHEDULER [#] – <message>.
Message criteria entered by the user.
SLCT FREQ – Select appropriate
frequency for approach.
The system notifies the pilot to load the approach frequency
for the appropriate NAV receiver. Select the correct frequency
for the approach.
SLCT MAG– Select MAGNETIC
NAV ANGLE display units.
The system notifies the pilot to set the Nav Angle units on the
Avionics Settings Screen to Magnetic.
SLCT NAV – Select NAV on CDI
for approach.
The system notifies the pilot to set the CDI to the correct NAV
receiver. Set the CDI to the correct NAV receiver.
134
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Annunciations & Alerts
Comments
The system notifies the pilot to set the Nav Angle units on the
Avionics Settings Screen to True.
STEEP TURN – Steep turn ahead.
A steep turn is 15 seconds ahead. Prepare to turn.
STRMSCP FAIL – Stormscope has
failed.
Stormscope has failed. The system should be serviced.
SVT DISABLED – Out of
available terrain region.
Synthetic Vision is disabled because the aircraft is not within
the boundaries of the installed terrain database.
SVT DISABLED – Terrain DB
resolution too low.
Synthetic Vision is disabled because a terrain database of
sufficient resolution (4.9 arc-second or better) is not currently
installed.
SW MISMATCH – GDU software
version mismatch. Xtalk is off.
The MFD and PFD have different software versions installed.
The system should be serviced.
TERRAIN AUD CFG – Trn
Awareness audio config error.
Service req’d.
TAWS is disabled because the audio configuration is invalid.
The system should be serviced.
TERRAIN DISABLED – Terrain
Awareness DB resolution too low.
TAWS is disabled because a terrain database of sufficient
resolution (4.9 arc-second or better) is not currently installed.
TIMER EXPIRD – Timer has
expired.
The system notifies the pilot that the timer has expired.
TRAFFIC FAIL – Traffic device has
failed.
The system is no longer receiving data from the traffic system.
The traffic device should be serviced.
TRN AUD FAIL – Trn Awareness
audio source unavailable
Terrain Awareness audio is unavailable. The system should be
serviced.
UNABLE V WPT – Can’t reach
current vertical waypoint.
The current vertical waypoint can not be reached within the
maximum flight path angle and vertical speed constraints.
The system automatically transitions to the next vertical
waypoint.
VNV – Unavailable. Excessive
crosstrack error.
The current crosstrack exceeds the limit, causing vertical
deviation to go invalid.
VNV – Unavailable. Excessive
track angle error.
The current track angle error exceeds the limit, causing the
vertical deviation to go invalid.
VNV – Unavailable. Parallel
course selected.
A parallel course has been selected, causing the vertical
deviation to go invalid.
EIS
SLCT NON-MAG– Select
alternate NAV ANGLE display
units.
Flight
Instruments
Message Advisory
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance
AFCS
Additional
Features
Abnormal
Operation
Annun/Alerts
Appendix
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
135
Message Advisory
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance
AFCS
Additional
Features
Abnormal
Operation
Annun/Alerts
Appendix
Index
Comments
VNV – Unavailable. Unsupported
leg type in flight plan.
The lateral flight plan contains a procedure turn, vector,
or other unsupported leg type prior to the active vertical
waypoint. This prevents vertical guidance to the active vertical
waypoint.
WPT ARRIVAL – Arriving at
waypoint -[xxxx]
Arriving at waypoint [xxxx], where [xxxx] is the waypoint
name.
XPDR1 ADS-B 1090 – Datalinik:
ADS-B 1090 receiver has failed.
A failure has been detected in the 1090 receiver.
XPDR1 ADS-B FAIL –
Transponder: XPDR1 is unable to
transmit ADS-B messages.
ADS-B is inoperative. The transponder may not be receiving
a valid GPS position. Other transponder functions may be
available. Service when possible.
XPDR1 ADS-B NO POS –
Transponder: ADS-B is not
transmitting position.
The transponder is not able to receive position information.
XPDR1 ADS-B TRFC –
Transponder: ADS-B traffic has
failed
The Transponder is incapable of processing traffic information.
XPDR1 ADS-B UAT – Datalink:
ADS-B in UAT receiver has failed.
A failure has been detected in the UAT receiver.
EIS
Flight
Instruments
Annunciations & Alerts
XPDR1 CONFIG – XPDR1 config
error. Config service req’d.
XPDR1 CSA FAIL - Traffic: ADS-B
In traffic alerting has failed.
The transponder configuration settings do not match those
of backup configuration memory. The system should be
serviced.
ADS-B Conflict Situational Awareness (CSA) is unavailable.
XPDR1 FAIL – XPDR1 is
inoperative.
There is no communication with the #1 or #2 transponder.
XPDR1 FAULT – Datalink:
ADSB-B in has failed.
The transponder is unable to receive ADS-B information.
XPDR1 FIS-B WX – Datalink:
FIS-B Weather has failed.
The transponder is unable to receive FIS-B weather
information.
XPDR1 OVER TEMP - Transponder: The system has detected an over temperature condition in
Transponder over temp.
XPDR1. The transmitter operates at reduced power. If the
problem persists, the system should be serviced.
XPDR1 PRES ALT –Transponder:
ADS-B no pressure altitude.
136
Unable to provide pressure altitude information.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Annunciations & Alerts
Comments
XPDR1 UNDER TEMP Transponder: Transponder under
temp.
The system has detected an under temperature condition in
XPDR1. The transmitter operates at reduced power. If the
problem persists, the system should be serviced.
XTALK ERROR – A flight display
crosstalk error has occurred.
The MFD and PFD are not communicating with each other.
The system should be serviced.
Nav/Com/
XPDR/Audio
The #1 transponder should be serviced when possible.
EIS
XPDR1 SRVC – XPDR1 needs
service. Return unit for repair.
Flight
Instruments
Message Advisory
Flight Plan Import/Export Results
Flight
Management
FLIGHT PLAN IMPORT/EXPORT MESSAGES
In some circumstances, some messages may appear in conjunction with others.
Description
Flight plan data was not successfully imported from
the SD card.
‘File contained user waypoints only.’
The file stored on the SD card did not contain a flight
plan, only user waypoints. One or more of these
waypoints did not import successfully.
‘Flight plan partially imported.’
Some flight plan waypoints were successfully
imported from the SD card, however others had errors
and were not imported. A partial stored flight plan
now exists in the system.
‘Too many points. Flight plan truncated.’
The flight plan on the SD card contains more
waypoints than the system can support. The flight
plan was imported with as many waypoints as
possible.
‘Some waypoints not loaded. Waypoints
locked.’
The flight plan on the SD card contains one or
more waypoints that the system cannot find in
the navigation database. The flight plan has been
imported, but must be edited within the system
before it can be activated for use.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
190-02199-01 Rev. A
Appendix
The SD card contains no flight plan data.
‘Flight plan import failed.’
Annun/Alerts
‘No flight plan files found to import.’
Abnormal
Operation
The file stored on the SD card did not contain a flight
plan, only user waypoints. These waypoints have
been saved to the system user waypoints. No flight
plans stored in the system have been modified.
Additional
Features
‘File contained user waypoints only. User
waypoints imported successfully. No
stored flight plan data was modified.’
AFCS
A flight plan file stored on the SD card was
successfully imported as a stored flight plan.
Hazard
Avoidance
‘Flight plan successfully imported.’
137
Flight Plan Import/Export Results
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance
AFCS
Additional
Features
Abnormal
Operation
Annun/Alerts
Appendix
Index
Description
‘User waypoint database full. Not all
loaded.’
The flight plan file on the SD card contains user
waypoints. The quantity of stored user waypoints has
exceeded system capacity, therefore not all the user
waypoints on the SD card have been imported. Any
flight plan user waypoints that were not imported
are locked in the flight plan. The flight plan must be
edited within the system before it can be activated
for use.
‘One or more user waypoints renamed.’
One or more imported user waypoints were renamed
when imported due to naming conflicts with
waypoints already existing in the system.
‘Flight plan successfully exported.’
The stored flight plan was successfully exported to the
SD card.
‘Flight plan export failed.’
The stored flight plan was not successfully exported
to the SD card. The SD card may not have sufficient
available memory or the card may have been removed
prematurely.
EIS
Flight
Instruments
Annunciations & Alerts
CREW PROFILE IMPORT/EXPORT MESSAGES
In some circumstances, some messages may appear in conjunction with others.
Crew Profile Import/Export Results
Description
‘No pilot profile plan files found to import.’
Displayed if the SD card does not have one or more
valid pilot profile filenames.
‘Overwrite existing profile?’
Displayed if the profile name matches the name of
existing profile.
‘Profile name invalid. Enter a different
profile name.’
Displayed if the profile name is invalid.
‘All available pilot profiles in use. Delete a
profile before importing another.’
Displayed if the maximum number for pilot profiles
has been reached.
‘Pilot profile import failed.’
Displayed if the importing operation fails for any
other reason.
‘Pilot profile import succeeded.’
Displayed if the importing operation succeeds.
‘Overwrite existing file?’
Displayed if the filename matches the name of an
existing file on the SD card.
‘Pilot profile export failed.’
Displayed if the export operation fails.
‘Pilot profile export succeeded.’
Displayed if the export operation succeeds.
138
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Appendix
Flight
Instruments
APPENDIX
SOFTKEY FUNCTION
Softkey Subdued
Softkey Names (displayed)
Nav/Com/
XPDR/Audio
Bezel-Mounted Softkeys (press)
Flight
Management
Softkeys (First-Level PFD Configuration)
PFD SOFTKEY MAPS
Level 2
Level 3
CAS
Level 4
Description
Displays the scroll keys. Only displayed
when the number of CAS messages exceeds
the capacity of the display window.
AFCS
Scroll up CAS messages (Accessible only
when the CAS Softkey is displayed).
CAS i
Scroll down CAS messages (Accessible only
when the CAS Softkey is displayed).
Displays the PFD Map display settings
softkeys.
Layout
Map Off
Removes the PFD map from display (Inset
or Traffic).
Inset Map
Displays the Inset Map.
HSI Map
Displays the HSI Map.
TFC Map
Replaces the PFD Map with a dedicated
traffic display.
Wx LGND
Displays/removes the name of the selected
data link weather provider (SiriusXM) and
the weather product icon and age box (for
enabled weather products).
Index
139
Appendix
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Annun/Alerts
190-02199-01 Rev. A
Abnormal
Operation
Displays the PFD Map selection softkeys.
Additional
Features
CAS h
Map/HSI
Hazard
Avoidance
Level 1
EIS
Softkey On
Level 1
Level 2
Level 3
Traffic
Displays traffic information on PFD Map.
Topo
Displays topographical data (e.g., coastlines,
terrain, rivers, lakes) and elevation scale on
PFD Map.
Rel Ter
Displays relative terrain information on the
PFD Map.
NEXRAD
Displays XM NEXRAD weather and coverage
on PFD Map (subscription optional).
METAR
Displays METAR information on PFD Map
(subscription optional).
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance
Additional
Features
AFCS
Description
Selects desired amount of map detail:
All (No Declutter): All map features visible
Detail 3: Declutters land data
Detail 2: Declutters land and SUA data
Detail 1: Removes everything except for
the active flight plan
Lightning
Adds/removes the display of SiriusXM
lightning information on PFD Map.
LTNG Off
Disables lightning function on PFD Map.
The softkey annunciator is green when the
lightning function is off.
Datalink
Selects the data link weather source for the
PFD Map.
TFC Map
Replaces the PFD Map with a dedicated
traffic display.
PFD Opt
Displays second-level softkeys for additional
PFD options.
Annun/Alerts
Abnormal
Operation
Level 4
Detail
EIS
Flight
Instruments
Appendix
SVT
Displays additional SVT overlay softkeys.
Appendix
Pathways
Terrain
Enables synthetic terrain depiction.
Displays compass heading along the ZeroPitch line.
Index
HDG LBL
Displays Pathway Boxes on the Synthetic
Vision Display.
140
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Appendix
Level 2
Level 3
APT Sign
Description
Displays position markers for airports within
approximately 15 nm of the current aircraft
position. Airport identifiers are displayed
when the airport is within approximately
9 nm.
Displays the wind option softkeys.
Wind information not displayed.
Headwind/Tailwind and crosswind
components.
Option 2
Wind direction arrow and speed.
Option 3
Wind direction arrow with direction and
speed.
Flight
Management
Option 1
DME
Nav/Com/
XPDR/Audio
Off
Hazard
Avoidance
Displays DME Information Window
(optional).
Cycles the Bearing 1 Information Window
through NAV1, NAV2, GPS/waypoint
identifier and GPS-derived distance
information, ADF/frequency, and Off.
Bearing 2
Cycles the Bearing 2 Information Window
through NAV1, NAV2, GPS/waypoint identifier
and GPS-derived distance information, ADF/
frequency, and Off.
ALT Units
Displays softkeys to select altitude unit
parameters.
Select to display the BARO setting as inches
of mercury.
Select to display the BARO setting as
hectopascals.
Selects OBS mode on the CDI when
navigating by GPS (only available with
active leg). When OBS is on, the softkey
annunciator is green.
CDI
Cycles through FMS, NAV1, and NAV2
navigation modes on the CDI.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index
OBS
Appendix
Sets barometric pressure to 29.92 in Hg
(1013 hPa if metric units are selected).
Annun/Alerts
IN
Abnormal
Operation
When enabled, displays altimeter in meters.
Additional
Features
Meters
HPA
190-02199-01 Rev. A
AFCS
Bearing 1
STD Baro
EIS
Wind
Level 4
Flight
Instruments
Level 1
141
EIS
Flight
Instruments
Appendix
Level 1
Level 2
Level 3
ADF/DME
Displays the transponder selection softkeys.
Additional
Features
Abnormal
Operation
Annun/Alerts
Selects transponder Standby Mode
(transponder does not reply to any
interrogations).
On
Activates transponder (transponder replies
to identification interrogations).
ALT
Altitude Reporting Mode (transponder
replies to identification and altitude
interrogations).
VFR
Automatically enters the VFR code (1200 in
the U.S.A. only).
Code
Displays transponder code selection softkeys
0-7.
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
Standby
Ident
0-7
Use numbers to enter code.
Ident
Activates the Special Position Identification
(SPI) pulse for 18 seconds, identifying the
transponder return on the ATC screen.
BKSP
Removes numbers entered, one at a time.
Activates the Special Position Identification
(SPI) pulse for 18 seconds, identifying the
transponder return on the ATC screen.
Activates the Special Position Identification
(SPI) pulse for 18 seconds, identifying the
transponder return on the ATC screen.
Tmr/Ref
Displays Timer/References Window.
Nearest
Displays Nearest Airports Window.
Messages
Index
Appendix
Description
Displays the ADF/DME Tuning Window,
allowing selection and tuning of the ADF
and DME (optional).
XPDR
Ident
Level 4
142
Displays the Messages Window when
pressed. System generated messages cause
the Messages Softkey label to change to a
flashing white with black text label. Pressing
the Messages Softkey acknowledges the
message, and the softkey reverts to the
black label with white text.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Appendix
Level 1
Level 2
Level 3
Engine
Flight
Instruments
MFD SOFTKEY MAPS
Description
Tabs
INC Fuel
Increases calculated fuel remaining by 1 gallon for each
softkey press.
RST Fuel
Resets calculated fuel remaining to default and resets fuel
used to zero.
CO RST
Resets the CO Guardian.
Map Opt
Hazard
Avoidance
Decreases calculated fuel remaining by 1 gallon for each
softkey press.
Displays system oil pressure and temperature, fuel
calculations, and electrical system information.
Displays traffic information on Navigation Map Page.
Inset
Displays inset window second level softkeys.
VSD
Displays VSD profile information of terrain/obstacles
along the current track, vertical track vector, and selected
altitude.
Auto: Automatically displays either VSD profile
information for active flight plan information or along
current track with no active flight plan.
FPL: Displays VSD profile information for active flight
plan.
TRK: Displays VSD profile information along current
track.
143
Index
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Appendix
Displays terrain on the map; cycles through the following:
Off: No terrain information shown on MFD Map.
Topo: Displays topographical data (e.g., coastlines,
terrain, rivers, lakes) and elevation scale on MFD Map.
REL: Displays relative terrain information on the MFD
Map.
Annun/Alerts
Removes VSD inset from Navigation Map Page.
Abnormal
Operation
190-02199-01 Rev. A
Off
Additional
Features
TER
AFCS
Traffic
Flight
Management
DEC Fuel
Nav/Com/
XPDR/Audio
Resets displayed fuel remaining to filler tab level and
resets fuel used to zero.
EIS
Displays EIS - Engine Page and second-level engine
softkeys; press again to exit page (see the EIS Section for
more information).
Level 1
Level 2
Level 3
Displays airways on the map; cycles through the
following:
Off: No airways are displayed.
On: All airways are displayed.
LO: Only low altitude airways are displayed.
HI: Only high altitude airways are displayed.
NEXRAD
Displays XM NEXRAD weather and coverage on
Navigation Map Page (optional).
XM LTNG
Displays XM lightning information on Navigation Map
Page (optional).
METAR
Displays METAR information on PFD Map (subscription
optional).
Legend
Displays legends for the displayed XM Weather products
(optional).
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance
Selects desired amount of map detail; cycles through the
following levels:
Detail All: All map features visible.
Detail-3: Declutters land data.
Detail-2: Declutters land and SUA data.
Detail-1: Removes everything except for the active
flight plan.
Charts
When available, displays optional airport and terminal
procedure charts.
AFCS
Detail
CHRT Opt
144
Displays chart display settings softkeys (if available).
Fit WDTH
Changes the chart size to fit the available screen width.
Full SCN
Removes data window to display chart on screen.
Show Map
or
Displays the ‘WPT–Airport Information’ page with the
procedure for the airport selected.
Chart
Displays the chart with the procedure for the airport
selected.
Info
Displays airport information:
Info 1: Displays Airport Information Page
Info 2: Displays Airport Directory Page
DP
Displays departure procedure chart.
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
Description
AWY
EIS
Flight
Instruments
Appendix
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Appendix
Level 2
Description
Displays standard terminal arrival procedure chart.
APR
Displays approach procedure chart.
WX
Displays weather information.
EIS
STAR
NOTAM
Displays NOTAM information for selected airport, when
available.
When available, displays optional checklists.
Nav/Com/
XPDR/Audio
Checklist
Level 3
Flight
Instruments
Level 1
LOADING UPDATED DATABASES
Hazard
Avoidance
CAUTION: Never disconnect power to the system when loading a database.
Power interruption during the database loading process could result in
maintenance being required to reboot the system.
Flight
Management
NOTE: Loading a database in the system prior to its effective date will result
in the expiration date on the power-up screen and the effective date on the
Aux – Databases Page being displayed in amber.
AFCS
Index
145
Appendix
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Annun/Alerts
190-02199-01 Rev. A
Abnormal
Operation
Databases may be loaded from an SD card, or through Garmin Pilot and Flight
Stream 510. When loading databases through Garmin Pilot and the Flight Stream
510, it must be enabled on the system and the multimedia card inserted in the bottom
SD slot of the MFD.
The cycles and dates for both standby and active databases are displayed on the
“Aux – Databases” page on the MFD. Any active databases with expiration dates in
the past will be highlighted with amber text. When an expired active database has a
standby database that is ready to become effective, a cyan double-sided arrow will be
displayed between the database cycles. When this arrow is visible, it indicates that
the standby and active databases in that row will be switched on the next power cycle,
activating the current standby database. Databases can also be manually selected (or
deselected) by highlighting a list item and pressing the ENT key, provided a valid,
verified standby database is present.
Additional
Features
NOTE: When loading database updates, the ‘DB Mismatch’ system messages
will be displayed until database synchronization is complete, followed by
turning system power off, then on. Synchronization can be monitored on
the Aux-Database Page.
EIS
Flight
Instruments
Appendix
In some cases it may be necessary to obtain an unlock code from Garmin in order
to make the database product functional. It may also be necessary to have the system
configured by a Garmin authorized service facility in order to use some database features.
Updating Databases using an SD Card
With the system OFF, remove an SD Card from the bottom SD card slot of the
MFD.
2) Download and install the databases on an SD card.
3)
Put the SD Card in the bottom SD card slot of the MFD.
4)
Turn the system ON.
5)
Press the ENT Key or the right most softkey on MFD display to
acknowledge the startup screen.
6)
Turn the large FMS Knob to select the Aux page group on the MFD.
7)
Turn the small FMS Knob to select the Database page group on the MFD.
8)
Monitor the Sync Status on the Database page. Wait for all databases to
complete syncing, indicated by ‘Sync Complete’ being displayed. A cyan
double arrow will appear between the Standby and Active columns to show
which Standby databases will be transferred to Active at the next power
cycle.
9)
Verify the correct database cycle information is shown in the Standby
Database column.
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
1)
NOTE: The Restart Softkey is enabled only when the aircraft is on the
ground.
Annun/Alerts
10) Press the Restart Softkey. A 10 second restart countdown will appear.
Appendix
11) Press the Restart Button in the display window to continue with the
restart of the system, or remove power from the system if the Restart
Softkey is diminished.
12) Remove the SD card from the bottom slot of the MFD.
Index
13) After restarting the system, turn the large FMS Knob and select the Aux
page group on the MFD.
14) Turn the small FMS Knob and select the Databases page.
146
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Appendix
Nav/Com/
XPDR/Audio
b) Turn the small FMS Knob as necessary to select the database title.
d) Remove and reapply power to the system.
18) Remove power from the system.
Press the Update softkey when the Database Update screen appears.
The Flight Stream 510 will enter WI-FI mode. The following screen will
appear.
Put the mobile device in WI-FI mode (refer to the Additional Features
section).
4)
Abnormal
Operation
2)
3)
Additional
Features
Insert the Flight Stream 510 Multimedia Card in the bottom slot of the
MFD.
AFCS
Updating Databases using Flight Stream 510 from any MFD page
(except the Aux - Databases page)
Connect the mobile device to the Flight Stream 510 WI-FI (refer to the
Additional Features section). The WI-FI Not Connected screen will close
when the WI-FI connection is established.
6)
7)
8)
When the transfer is complete, the following screen will appear.
Press the Close softkey.
When an existing database is expired and a new one is ready to become
active, a Database Expired window will appear. Continue to the next step
to restart the system.
Index
147
Appendix
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Annun/Alerts
5)
190-02199-01 Rev. A
Hazard
Avoidance
e) Verify that the standby databases transferred and are now in the active
database column.
Flight
Management
c) Press the ENT Key. A cyan double-sided arrow will appear indicating
that the standby database will become active.
1)
EIS
a) Press the FMS Knob. The first database title on the screen will be
selected.
Flight
Instruments
15) Verify that the standby databases transferred and are now in the active
database column.
16) To view database information for an individual display, press and then turn
the FMS Knob to select the database, and then press the Details Softkey.
Press the ENT Key or the FMS Knob to exit.
17) To manually activate any databases that did not transfer to the active
column:
Flight
Instruments
Appendix
NOTE: The Restart Softkey is enabled only when the aircraft is on the
ground.
EIS
9)
Select the Restart softkey to restart the system and load the updated
database(s), or remove power from the system if the Restart Softkey is
diminished .
Nav/Com/
XPDR/Audio
10) After restarting the system, turn the large FMS Knob and select the Aux
page group on the MFD.
11) Turn the small FMS Knob and select the Databases page.
Flight
Management
12) Verify that the standby databases transferred and are now in the active
database column.
Hazard
Avoidance
13) To view database information for an individual display, press and then turn
the FMS Knob to select the database, and then press the Details Softkey.
Press the ENT Key or the FMS Knob to exit.
14) To manually activate any databases that did not transfer to the active
column:
AFCS
a) Press the FMS Knob. The first database title on the screen will be
selected.
b) Turn the small FMS Knob as necessary to select the database title.
Additional
Features
c) Press the ENT Key. A cyan double-sided arrow will appear indicating
that the standby database will become active.
d) Remove and reapply power to the system.
Abnormal
Operation
e) Verify that the standby databases transferred and are now in the active
database column.
Updating Databases using Flight Stream 510 from the Aux - Databases
page
1)
Appendix
Annun/Alerts
15) Remove power from the system.
With the system OFF, insert the Flight Stream 510 Multimedia Card in the
Index
bottom slot of the MFD.
148
2)
Turn the large FMS Knob to select the Aux page group on the MFD.
3)
Turn the small FMS Knob to select the Database page group on the MFD.
4)
Press the Device Softkey.
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Appendix
6)
Press the Update softkey. The Flight Stream 510 will enter WI-FI mode.
7)
Put the mobile device in WI-FI mode (refer to the Additional Features
section).
8)
Connect the mobile device to the Flight Stream 510 WI-FI (refer to the
Additional Features section).
9)
The Database Update status will appear in the Status window at the top of
the page.
EIS
The Aux - Databases page will show the databases connected to the mobile
device in place of the active databases on the system. Databases selected
to load will be indicated by a cyan arrow.
Flight
Instruments
5)
Hazard
Avoidance
10) Select the Restart softkey to restart the system and load the updated
database(s), or remove power from the system if the Restart Softkey is
diminished .
Flight
Management
ground.
Nav/Com/
XPDR/Audio
NOTE: The Restart Softkey is enabled only when the aircraft is on the
AFCS
11) After restarting the system, turn the large FMS Knob and select the Aux
page group on the MFD.
12) Turn the small FMS Knob and select the Databases page.
Annun/Alerts
15) To manually activate any databases that did not transfer to the active
column:
Abnormal
Operation
14) To view database information for an individual display, press and then turn
the FMS Knob to select the database, and then press the Details Softkey.
Press the ENT Key or the FMS Knob to exit.
Additional
Features
13) Verify that the standby databases transferred and are now in the active
database column.
a) Press the FMS Knob. The first database title on the screen will be
selected.
b) Turn the small FMS Knob as necessary to select the database title.
Appendix
c) Press the ENT Key. A cyan double-sided arrow will appear indicating
that the standby database will become active.
d) Remove and reapply power to the system.
16) Remove power from the system.
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
149
Index
e) Verify that the standby databases transferred and are now in the active
database column.
MAGNETIC FIELD VARIATION DATABASE UPDATE
A copy of the current magnetic field variation database (MV DB) is included with
the navigation database. At startup, the system compares this version of the MV DB
with that presently being used by the AHRS. If the system determines the MV DB
needs to be updated, a prompt is displayed on the Navigation Map Page.
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Appendix
GRS1 Magnetic Field Variation Database Update Prompt
Hazard
Avoidance
Loading the magnetic field variation database update:
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
With ‘OK’ highlighted, as seen in Figure B-10, press the ENT Key on the
MFD. A progress monitor is displayed as shown. When the upload is
complete, the system is ready for use.
Index
Appendix
Uploading Database to GRS1
150
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Appendix
Flight
Instruments
MAP SYMBOLS
Land Symbols
Maximum
Range
(nm)
25
40
Interstate Highway (Freeway)
50
400
International Highway (Freeway)
50
400
US Highway (National Highway)
15
150
State Highway (Local Highway)
2.5
100
4
25
Railroads (RAILROAD)
7.5
25
Large City (> 200,000)
100
1000
Medium City (> 50,000)
50
400
Small City (> 5,000)
25
100
State/Province
400
1000
River/Lake
75
100
Latitude/Longitude (LAT/LON)
1
1000
Symbol
User Waypoint
Nav/Com/
XPDR/Audio
Highways and Roads
Hazard
Avoidance
AFCS
N/A
Flight
Management
Local Road (Local Road)
EIS
Default
Range
(nm)
Land Symbols
Additional
Features
Abnormal
Operation
Annun/Alerts
Appendix
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
151
Aviation Symbols
Default
Range
(nm)
Maximum
Range
(nm)
Large Airport (Longest Runway
≥ 8100 ft)
100
1000
Medium Airport (8100 ft >
Longest Runway ≥ 5000 ft)
50
400
Small Airport (Longest Runway
< 5000 ft)
(Medium Airport if it has a
tower frequency)
25
150
1.5
5
7.5
150
N/A
N/A
Intersection (INT)
25
40
Non-directional Beacon (NDB)
25
50
VOR
50
250
N/A
N/A
Visual Reporting Point (VRP)
25
1000
Temporary Flight Restriction
(TFR)
250
1000
VNAV Constraints
1000
1000
N/A
N/A
Aviation Symbols
Taxiways (SafeTaxi)
Symbol
See Additional Features
Runway Extension
Missed Approach Preview On/
Off (Missed APR)
VOR Compass Rose On/Off
(VNAV Constraints) Show All
(show all constraints within
flight plan if VNAV Constraints
are ‘On’ above)
N/A
N/A
N/A
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Appendix
152
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Appendix
Symbol
Default
Range
(nm)
Maximum
Range
(nm)
Smart Airspace On/Off
N/A
N/A
N/A
Class B Airspace Altitude Label
(ceiling/floor)
N/A
N/A
Class C Airspace Altitude Label
(ceiling/floor)
N/A
N/A
Class D Airspace Altitude Label
(ceiling)
N/A
N/A
Class B Airspace/TMA (CLASS B/
TMA)
50
150
Class C Airspace/TCA (CLASS C/
TCA)
50
100
Class D Airspace (CLASS D)
10
100
Alert/Prohibited/Restricted/Warning
Areas (RESTRICTED)
50
100
Military Operations Area [(MOA)
(MILITARY)]
50
250
Other/Air Defense Interdiction Zone
(OTHER/ADIZ)
50
250
EIS
Airspace Symbols
Flight
Instruments
Airspace Symbols
Nav/Com/
XPDR/Audio
Airspace Altitude Labels (Airspace
ALT LBL) On/Off
Flight
Management
Hazard
Avoidance
AFCS
Additional
Features
Abnormal
Operation
Annun/Alerts
Appendix
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
153
Airways Symbols
Default
Range
(nm)
Maximum
Range
(nm)
Low Altitude Airways (V Routes and T
Routes)
50
100
High Altitude Airways (J Routes and Q
Routes)
50
100
Airways Symbols
Symbol
Flight
Management
Active Flight Plan Leg Type Symbols
Flight Plan Leg Type
Hazard
Avoidance
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Appendix
Active Heading Leg*
Symbol
Active Course Leg*
Abnormal
Operation
Additional
Features
AFCS
Active Roll Steering Path*†
Course Leg in the current flight segment
Course Leg not in the current flight segment
Heading Leg
Roll Steering Path †
Turn Anticipation Arc
* The active leg or path is the one currently being flown, and is shown in magenta.
† A roll steering path is a computed transition between two disconnected legs.
‡ A roll steering path in the flight plan that is beyond the next leg appears as a future roll steering
path. When a future roll steering path becomes the next leg in the flight plan, it appears as a roll
steering path.
Index
Appendix
Annun/Alerts
Future Roll Steering Path ‡
154
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Appendix
Item
Flight
Instruments
MISCELLANEOUS SYMBOLS
Symbol
ARTCC Frequency or FSS Frequency
EIS
North Arrow
Nav/Com/
XPDR/Audio
Map Pointer (when panning)
Flight
Management
Measuring Pointer
Hazard
Avoidance
User Waypoint
Vertical Navigation Along Track Waypoint
AFCS
Parallel Track Waypoint
Unanchored Flight Path Waypoint
Additional
Features
Displayed when aircraft GPS location is valid, but heading is invalid.
Top of Descent (TOD)
Abnormal
Operation
Bottom of Descent (BOD)
Annun/Alerts
Navigating using Dead Reckoning
Appendix
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
155
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Appendix
Blank Page
156
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Index
Index-1
Index
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Appendix
Flight Director 87
Flight Plan, Active
Creating 33
Leg Type 154
Flight plan import/export messages 137
Flight Plan Map 43
Flight Stream 510 37, 103
FliteCharts 91
FPA 46
Fuel
Calculations 13
Quantity 10
Fuel on Board 59
Annun/Alerts
190-02199-01 Rev. A
F
Abnormal
Operation
Cargo 59
ChartView 91
COM 105
Endurance, calculated (ENDUR) 12, 13
Engine manifold pressure 9, 11
Export a Flight Plan 37
Additional
Features
C
E
AFCS
Basic Empty Weight 58
Bluetooth 37, 103, 104
Hazard
Avoidance
B
Flight
Management
Data Link Receiver 122
Day/Night views 93
DB Mismatch 145
Dead Reckoning 106
DEC FUEL softkey 13
Declutter 106
Deleting
An entire airway 40
An entire procedure 40
An individual waypoint 40, 41
Departure
Procedure 53
Select 53, 54
Detail Softkey 91
Direct-to 21, 31, 32, 33
DR mode 106, 107, 108
Nav/Com/
XPDR/Audio
Active Channel 94
AC-U-KWIK 93
ADF frequency tuning 17
ADF volume 17
AHRS 109, 124, 128, 130
Aircraft alerts 111
Airport
Information 27
Airport Directory 93
Airway
Collapse/Expand Airways 35
Along Track Offset 41
ALT 82
Altimeter setting 106
Altitude
Constraints 47
Altitude mode 82
Altitude volume 82
AOPA 93
AOPA’s Airport Directory 93
Approach
Activating 55, 56
Loading 54, 55
Removing 56
Approach channel 55
APR softkey 55, 59
Arrival procedure 53, 54
Aviation Symbols 152, 153, 154
EIS
D
Flight
Instruments
A
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Index
G
P
Garmin Pilot 103, 104
GIS Hardware Mismatch 130
Pairing 103
Parallel Track 41
Passenger(s) 58, 59
Pending flight plan 38, 39
Pilot and Stores Weight 58
H
Horizontal Situation Indicator (HSI) 54
HW Mismatch 130
I
Import a Flight Plan 36
Inverting a flight plan 36
IOI 113, 115
Additional
Features
AFCS
Hazard
Avoidance
J
Jeppesen 91
L
Land Symbols 151
M
Missed Approach 57
Mode selection softkeys 17
Index
Appendix
Annun/Alerts
Abnormal
Operation
N
Navigation
Database 47
Nearest
Airport 26, 27, 55
Airports Page 26, 27
Nearest airports, frequency tuning 15
NEXRAD 68
O
Obstacles 126
Overspeed Protection 88
Index-2
R
RAIM 61, 62
Reversionary mode 105
ROC 113, 115
S
SafeTaxi 91
SBAS 62, 107, 130
Scheduler 96
SiriusXM Weather
Icing 72
Softkeys 139–146
EIS 143
Split Screen 43
SQ annunciation 18
Standby Navigation Database 146
Surface Analysis 70
SVT 135
Symbols, map 151, 155
T
Tachometer 9, 11
TAS 81, 82, 124
TAWS 114
Terminal procedures charts 92, 93
Terrain 126
Terrain Proximity 74
Traffic 63
Traffic map page 81
Transponder 15, 142
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Index
Flight
Instruments
U
User-Defined Holding Pattern 45
V
EIS
Vertical Navigation (VNAV) 33, 47
Direct-to 46
VNV 106
VNV guidance 48
Disabling 46
Enabling 46
VOL annunciation 18
Volume level
ADF 17
VRP 28, 152
VS TGT 46
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance
W
AFCS
Waypoint Selection Submenu 34
Waypoint Submenu 31, 34
WiFi 97, 98, 99
Additional
Features
Abnormal
Operation
Annun/Alerts
Appendix
Index
190-02199-01 Rev. A
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
Index-3
Index
Appendix
Annun/Alerts
Abnormal
Operation
Additional
Features
AFCS
Hazard
Avoidance
Flight
Management
Nav/Com/
XPDR/Audio
EIS
Flight
Instruments
Index
Blank Page
Index-4
Garmin G1000 NXi Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-02199-01 Rev. A
Garmin International, Inc.
1200 East 151st Street
Olathe, KS 66062, U.S.A.
p: 913.397.8200 f: 913.397.8282
Aircraft On Ground (AOG) Hotline: 913.397.0836
Aviation Dealer Technical Support: 888.606.5482
Garmin (Europe) Ltd.
Liberty House, Hounsdown Business Park
Southampton, Hampshire SO40 9LR U.K.
Tel: +44 (0) 238 052 4000
Fax: +44 (0) 238 052 4004
Aviation Support: +44 (0) 370 850 1243
Garmin AT, Inc.
2345 Turner Road SE
Salem, OR 97302, U.S.A.
p: 503.581.8101 f: 503.364.2138
Garmin Corporation
No. 68, Zhangshu 2nd Road
Xizhi District, New Taipei City, Taiwan
p: 34-93-357-2608 f: 34-93-429-4484
www.garmin.com
© 2016, 2017 Garmin Ltd. or its subsidiaries
190-02199-01 Rev. A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising