Siemens | HG0K9VQ50M | Instructions for use | Siemens Gas range cooker Stainless steel Instructions for Use

Siemens Gas range cooker Stainless steel Instructions for Use
Free standing cooker
HG0K9VQ50M
TJFNFOTIPNFCTIHSPVQDPNXFMDPNF
[en]Instruction manual
3FHJTUFS
ZPVS
QSPEVDU
POMJOF
en
Table of contents
[ en] I nst r uct i on manual
8 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
( Important safety information . . . . . . . . . . . . . . . 5
] Causes of damage . . . . . . . . . . . . . . . . . . . . . . . . 7
3 Trouble shooting . . . . . . . . . . . . . . . . . . . . . . . . 24
Replacing the oven light bulb . . . . . . . . . . . . . . . . . . .24
4 Customer service . . . . . . . . . . . . . . . . . . . . . . . . 25
E number and FD number . . . . . . . . . . . . . . . . . . . . .25
Hob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Damage to the oven. . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Storage compartment . . . . . . . . . . . . . . . . . . . . . . . . . 8
5 Installation and connection. . . . . . . . . . . . . . . . . 8
Measures to be noted during transport
Installation . . . . . . . . . . . . . . . . . . . . . .
Positioning and levelling. . . . . . . . . . . .
Gas connection . . . . . . . . . . . . . . . . . .
Electrical connection . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. .8
. .8
. .9
. .9
. 10
Produktinfo
Additional information on products, accessories,
replacement parts and services can be found at
www.siemens-home.bsh-group.com and in the online
shop www.siemens-home.bsh-group.com/eshops
7 Environmental protection . . . . . . . . . . . . . . . . . 11
Saving energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Saving energy with the gas hob . . . . . . . . . . . . . . . . . 11
Environmentally-friendly disposal . . . . . . . . . . . . . . . . 11
* Getting to know your appliance . . . . . . . . . . . . 11
The control panel . . . . . . . .
The electronic clock . . . . . .
The hob . . . . . . . . . . . . . . .
Oven . . . . . . . . . . . . . . . . .
The cooking compartment .
The storage compartment .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 12
. 12
. 12
. 13
. 14
. 14
_ Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
K Before using for the first time. . . . . . . . . . . . . . 15
Baking out the oven . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Cleaning the burner caps and cups . . . . . . . . . . . . . . 15
Cleaning the accessories . . . . . . . . . . . . . . . . . . . . . . 15
1 Operating the appliance . . . . . . . . . . . . . . . . . . 15
Hob . . . . . . . . . . .
Oven . . . . . . . . . . .
Using combi mode.
Rotary spit . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 15
. 16
. 17
. 17
O Time-setting options . . . . . . . . . . . . . . . . . . . . . 19
D Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Cleaning agents . . . . . . . . . . . . . . . . . .
Surfaces in the cooking compartment .
Detaching and refitting the rails . . . . . .
Keeping the appliance clean . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 19
. 21
. 22
. 22
q Appliance door . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Detaching and attaching the oven door . . . . . . . . . . . 22
3
en
Intended use
8Intended use
Read these instructions carefully. Only then
will you be able to operate your appliance
safely and correctly. Retain the instruction
manual and installation instructions for future
use or for subsequent owners.
The images shown in these instructions are for
guidance only.
Appliance category: Category 1
Check the appliance for damage after
unpacking it. Do not connect the appliance if it
has been damaged in transport.
Only allow a licensed professional to connect
the appliance and to convert the appliance to
a different type of gas. The appliance must be
installed (electric and gas connections) in
accordance with the instruction and
installation manual. An incorrect connection or
incorrect settings may lead to serious
accidents and damage to the appliance. The
appliance manufacturer accepts no liability for
damage of this kind. The appliance's warranty
becomes void.
This appliance is intended for private domestic
use and the household environment only. The
appliance must only be used for the
preparation of food and beverages. The
cooking process must be supervised. A short
cooking process must be supervised without
interruption. Only use the appliance in
enclosed spaces.
Caution:This appliance is for cooking
purposes only. It must not be used for other
purposes, for example room heating.
This appliance is intended for use up to a
maximum height of 2000 metres above sea
level.
Caution !: This appliance must only be set up
in a well-ventilated room in compliance with
the applicable regulations. Read these
instructions carefully before installing and
using the appliance.
Caution:The use of a gas cooking appliance
results in the production of heat, moisture and
products of combustion in the room in which it
is installed. Ensure that the kitchen is well
ventilated especially when the appliance is in
use: keep natural ventilation holes open or
install a mechanical ventilation device
(mechanical extractor hood).
I nt ended us e
4
Prolonged intensive use of the appliance may
call for additional ventilation, for example
opening of a window, or more effective
ventilation, for example increasing the level of
mechanical ventilation where present.
: Warning – WHAT TO DO IF YOU SMELL
GAS!
Escaping gas may cause an explosion.
If you smell gas or notice any faults in the
gas installation:
■
Immediately shut off the gas supply or close
the gas cylinder valve.
■
Immediately extinguish all naked flames
and cigarettes.
■
Do not use any light or appliance switches
and do not pull any plugs out of sockets.
Do not use any telephones or mobile
phones within the building.
■
Open windows and ventilate the room.
■
Call the after­sales service or the gas
supplier.
This appliance is not designed for operation
with an external timer or by remote control.
Do not use inappropriate child safety shields
or hob guards. These can cause accidents.
This appliance may be used by children over
the age of 8 years old and by persons with
reduced physical, sensory or mental
capabilities or by persons with a lack of
experience or knowledge if they are
supervised or are instructed by a person
responsible for their safety how to use the
appliance safely and have understood the
associated hazards.
Children must not play with, on, or around the
appliance. Children must not clean the
appliance or carry out general maintenance
unless they are at least 15 years old and are
being supervised.
Keep children below the age of 8 years old at
a safe distance from the appliance and power
cable.
Always slide accessories into the cooking
compartment the right way round.
~ "Accessories" on page 14
Important safety information
(Important safety
information
I mpor t ant saf et y i nf or mat i on
:Warning – Risk of fire!
A draught is created when the appliance
door is opened. Greaseproof paper may
come into contact with the heating element
and catch fire. Do not place greaseproof
paper loosely over accessories during
preheating. Always weight down the
greaseproof paper with a dish or a baking
tin. Only cover the surface required with
greaseproof paper. Greaseproof paper
must not protrude over the accessories.
Risk
of fire!
■
Combustible
objects that are left in the
cooking compartment may ignite. Never
store combustible items in the cooking
compartment. Never open the appliance
door if there is smoke inside. Switch off the
appliance and unplug the mains plug or
switch off the fuse in the fuse box. Shut off
the gas supply.
Risk
of oil
fire!
■
Hot
and fat can ignite very quickly. Never
leave hot fat or oil unattended. Never use
water to put out burning oil or fat. Switch off
the hotplate. Extinguish flames carefully
using a lid, fire blanket or something similar.
Risk
of fire!
■
The
hotplates become very hot. Never
place combustible items on the hob. Never
place objects on the hob.
Risk
of fire!
■
The
appliance becomes very hot, and
flammable materials can easily catch fire.
Do not store or use any flammable objects
(e.g. aerosol cans, cleaning agents) under
or in the vicinity of the oven. Do not store
any flammable objects inside or on top of
the oven.
Risk
of fire!
■
When
gas hotplates are in operation without
any cookware placed on them, they can
build up a lot of heat. The appliance and the
extractor hood above it may become
damaged or be set on fire. Grease residue
in the filter of the extractor hood may ignite.
Only operate the gas burners with
cookware on them.
Risk
of rear
fire! of the appliance becomes very hot.
■
The
This may cause damage to the power
cables. Electricity and gas lines must not
come into contact with the rear of the
appliance.
Risk of fire!
■
en
Never place flammable objects on the
burners or store them in the cooking
compartment. Never open the appliance
door if there is smoke inside. Switch off the
appliance. Pull out the mains plug or switch
off the appliance at the circuit breaker in the
fuse box. Shut off the gas supply.
Risk
of fire!
■
The
surfaces of the plinth drawer may
become very hot. Only store oven
accessories in the drawer. Flammable and
combustible objects must not be stored in
the plinth drawer.
■
: Warning – Risk of burns!
The appliance becomes very hot. Never
touch the interior surfaces of the cooking
compartment or the heating elements.
Always allow the appliance to cool down.
Keep children at a safe distance.
Risk
of serious burns!
■
Accessories
and ovenware become very
hot. Always use oven gloves to remove
accessories or ovenware from the cooking
compartment.
Risk
of burns!vapours may catch fire in the hot
■
Alcoholic
cooking compartment. Never prepare food
containing large quantities of drinks with a
high alcohol content. Only use small
quantities of drinks with a high alcohol
content. Open the appliance door with care.
Risk
of burns!
■
The
hotplates and surrounding area
(particularly the hob surround, if fitted)
become very hot. Never touch the hot
surfaces. Keep children at a safe distance.
Risk
of burns!
■
During
operation, the surfaces of the
appliance become hot. Do not touch the
surfaces when they are hot. Keep children
away from the appliance.
Risk
of burns!
■
Empty
cookware becomes extremely hot
when set on a gas hotplate that is in
operation. Never heat up empty cookware.
Risk
of burns!
■
The
appliance becomes hot during
operation. Allow the appliance to cool down
before cleaning.
Risk
of burns!Accessible parts may be hot when
■
Caution:
the grill is in use. Young children should be
kept away from the appliance.
Risk
of burns!
■
If the
liquefied gas bottle is not upright,
liquefied propane/butane can enter the
appliance. Intense darting flames may
therefore escape from the burners.
Components may become damaged and
start to leak over time so that gas escapes
uncontrollably. Both can cause burns.
Always use liquefied gas bottles in an
upright position.
■
5
en
Important safety information
Before opening the top cover, remove any
spills with a cloth.
: Warning – Risk of scalding!
The accessible parts become hot during
operation. Never touch the hot parts. Keep
children at a safe distance.
Risk
of scalding!
■
When
you open the appliance door, hot
steam can escape. Steam may not be
visible, depending on its temperature. When
opening, do not stand too close to the
appliance. Open the appliance door
carefully. Keep children away.
Risk
of scalding!
■
Water
in a hot cooking compartment may
create hot steam. Never pour water into the
cooking compartment when the cooking
compartment is hot.
■
: Warning – Risk of injury!
Scratched glass in the appliance door may
develop into a crack. Do not use a glass
scraper, sharp or abrasive cleaning aids or
detergents.
Risk
injury! glass cover may break and
■
A of
scratched
fragment. Do not use glass scrapers, sharp
or abrasive cleaning aids, or harsh cleaning
products.
Risk
of injury!repairs are dangerous. Repairs
■
Incorrect
may only be carried out, and damaged
power and gas lines replaced, by an aftersales engineer trained by us. If the
appliance is faulty, unplug the mains plug or
switch off the fuse in the fuse box. Shut off
the gas supply. Contact the after-sales
service.
Risk
of injury!
■
Faults
or damage to the appliance are
dangerous. Never switch on a faulty
appliance. Unplug the appliance from the
mains or switch off the circuit breaker in the
fuse box. Shut off the gas supply. Contact
the after-sales service.
Risk
of injury! pan sizes, damaged or
■
Unsuitable
incorrectly positioned pans can cause
serious injury. Observe the instructions
which accompany the cookware.
Risk
of injury!Glass lids may shatter when
■
Caution:
heated. Turn off all the burners before
shutting the lid. Wait until the oven has
cooled down before closing the glass
cover.
■
6
Risk
of injury!
If the
appliance is placed on a base and is
not secured, it may slide off the base. The
appliance must be fixed to the base.
Risk
of injury!
■
The
hinges on the appliance door move
when opening and closing the door, and
you may be trapped. Keep your hands away
from the hinges.
Risk
of injury!
■
If you
leave the appliance door open,
people may bump into it, resulting in injury.
The appliance door must be kept closed
both while the appliance is in operation and
when it has finished.
■
: Warning – Risk of tipping!
Warning: In order to prevent tipping of the
appliance, this stabilizing means must be
installed. Refer to the instructions for
installation.
Causes of damage
: Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs
may only be carried out by one of our
trained after-sales engineers. If the
appliance is faulty, unplug the mains plug or
switch off the fuse in the fuse box. Contact
the after-sales service.
Risk
of electric
shock and serious
injury!
■
The
cable insulation
on electrical
appliances may melt when touching hot
parts of the appliance. Never bring
electrical appliance cables into contact with
hot parts of the appliance.
Risk
electric
■
Doofnot
use shock!
any high-pressure cleaners or
steam cleaners, which can result in an
electric shock.
Risk
of electric
shock!the cooking compartment
■
When
replacing
bulb, the bulb socket contacts are live.
Before replacing the bulb, unplug the
appliance from the mains or switch off the
circuit breaker in the fuse box.
Risk
electric shock!
■
A of
defective
appliance may cause electric
shock. Never switch on a defective
appliance. Unplug the appliance from the
mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.
■
en
]Causes of damage
Causes of damge
Hob
Caution!
■
Only use the burners when cookware has been
placed on top. Do not heat up empty pots or pans.
The saucepan base will be damaged.
■
Only use pots and pans with an even base.
■
Place the pot or pan centrally over the burner. This
will optimise transfer of the heat from the burner
flame to the pot or ban base. The handle does not
become damaged, and greater energy savings are
guaranteed.
■
Clear up spills immediately. Use deep pots for
dishes with a lot of liquid. This will prevent the food
from boiling over.
■
Do not use roasting dishes if they must be heated
using two burners. This will cause heat
accumulation. The appliance could be damaged.
■
Cooking on gas burners releases extra heat and
moisture. Adjacent units may become damaged over
time. For long cooking times, switch on the cooker
hood or ventilate the room.
■
Observe the manufacturer's instructions when using
special ovenware.Aluminium foil and plastic
containers can melt and stick on hot burners.
■
Ensure that the gas burners are clean and dry. The
burner cup and burner cap must be positioned
exactly.
■
Ensure that the top cover is not closed when the
oven is started up.
Damage to the oven
Caution!
■
Accessories, foil, greaseproof paper or ovenware on
the cooking compartment floor: do not place
accessories on the cooking compartment floor. Do
not cover the cooking compartment floor with any
sort of foil or greaseproof paper. Do not place
ovenware on the cooking compartment floor if a
temperature of over 50 ºC has been set. This will
cause heat to accumulate. The baking and roasting
times will no longer be correct and the enamel will
be damaged.
■
Water in a hot cooking compartment: do not pour
water into the cooking compartment when it is hot.
This will cause steam. The temperature change can
cause damage to the enamel.
■
Moist food: do not store moist food in the cooking
compartment when it is closed for prolonged
periods This will damage the enamel.
■
Fruit juice: when baking particularly juicy fruit pies,
do not pack the baking tray too generously. Fruit
juice dripping from the baking tray leaves stains that
cannot be removed. If possible, use the deeper
universal pan.
■
Cooling with the appliance door open: only allow the
cooking compartment to cool when it is closed. Even
if the appliance door is only open a little, front panels
of adjacent units could be damaged over time.
7
en
■
■
■
■
■
Installation and connection
Very dirty door seal: If the door seal is very dirty, the
appliance door will no longer close properly when
the appliance is in use. The fronts of adjacent units
could be damaged.Always keep the door seal clean.
Appliance door as a seat, shelf or worktop: Do not
sit on the appliance door, or place or hang anything
on it. Do not place any cookware or accessories on
the appliance door.
Inserting accessories: depending on the appliance
model, accessories can scratch the door panel
when closing the appliance door. Always insert the
accessories into the cooking compartment as far as
they will go.
Carrying the appliance: do not carry or hold the
appliance by the door handle. The door handle
cannot support the weight of the appliance and
could break.
Heavy accessories: do not pull out heavily laden
accessories too far without first unloading them
sufficiently. Heavy accessories will tip when pulled
out. This causes pressure to be exerted on the shelf
supports in the cooking compartment, which can
damage the enamel. Relieve the strain on the
accessories when they are pulled out by raising
them slightly with one hand. Caution: always use an
oven cloth or oven gloves when handling hot
accessories.
Storage compartment
Caution!
Do not place hot objects in the storage compartment. It
could be damaged.
5Installation and connection
I ns t a l a t i o n a n d c o n ec t i o n
Measures to be noted during transport
Secure all mobile parts in and on the appliance using
an adhesive tape that can be removed without leaving
any traces. Push all accessories (e.g. baking tray) into
the corresponding slots with cardboard at the edges, in
order to avoid damaging the appliance. Place
cardboard or similar between the front and rear side to
prevent knocks against the inside of the glass door.
Secure the door and, if available, the top cover to the
appliance sides using adhesive tape.
Keep the original appliance packaging. Only transport
the appliance in the original packaging. Observe the
transport arrows on the packaging.
If the original packaging is no longer available
pack the appliance in protective packaging to
guarantee sufficient protection against any transport
damage.
Transport the appliance in an upright position. Do not
hold the appliance by the door handle or the
connections on the rear, as these could be damaged.
Do not place any heavy objects on the appliance.
Installation
This appliance is supplied with a set of adjustable feet
and a glass cover. The glass cover is prefitted.
Fitting the adjustable feet
1. Remove all parts that are not permanently fixed,
especially the pan supports and burners.
2. Remove any accessories from the oven.
3. Lift one side of the appliance off the floor and tilt it
slightly.
4. Screw the adjustable feet into the mounting holes on
the underside of the appliance.
Note: If the appliance needs to be moved again,
screw the adjustable feet in fully.
5. Only finally level the appliance once the electricity
and gas have been connected and all of the
installation work is complete.
8
Installation and connection
en
Positioning and levelling
Gas connection
Positioning the appliance
When installing the appliance, make sure that there is
enough space in the final installation location to pull the
appliance forwards for cleaning and maintenance work.
The ground underneath must be hard and firm. The wall
immediately behind the appliance must be made from
non-flammable material, e.g. tiles.
If you need to move the appliance in order to position it,
make sure that the adjustable feet are fully screwed in.
Installation must only be performed by an approved
expert or a licensed after-sales service engineer in
accordance with the instructions specified under "Gas
connection and conversion to a different gas type".
Aligning the appliance
Turn the adjustable feet to align the appliance.
Note: Do not align the appliance until all other work has
been completed.
The adjustable feet can be used to elevate the
appliance by a maximum of 50 mm.
Check the alignment of the appliance once it has been
installed in the intended place.
Adjacent units
Any adjacent units must not be made of flammable
materials. The fronts of any adjacent units must be heatresistant up to at least 90 °C. If the appliance is
installed very close to any other units, the minimum
clearances given in the figure must be maintained.
Caution!
■
The settings for configuring this appliance can be
found on the rating plate.
■
Before setting up the appliance, check the grid
access conditions (gas type and gas pressure) and
ensure that the gas setting of the appliance meets
these conditions. If the appliance settings have to be
changed, follow the instructions in the section "Gas
connection and conversion to a different gas type".
■
This appliance is not connected to a waste gas
main. It must be connected and commissioned in
accordance with the installation conditions. Do not
connect the appliance to a waste gas main. All
ventilation regulations must be observed.
■
The gas connection must be made via a fixed, i.e.
not mobile connection (gas line) or via a safety
hose.
■
If using the safety hose, ensure that the hose is not
trapped or crushed. The hose must not come into
contact with hot surfaces.
■
The connection must have an easily accessible
locking device.
Flexible hoses
For flexible hoses, observe the following points:
■
■
■
■
■
PLQ
PLQ
For the licensed expert or after-sales service
Do not pinch or squeeze hoses.
Do not subject the hoses to twisting or pulling
forces.
Keep the hoses away from sharp edges.
Do not let the hoses come into contact with parts
that may reach a temperature higher than 70 °C
above room temperature.
Make sure that the full length of the hoses is
accessible for inspection.
PLQ
PLQ
PLQ
Wall fixing
To prevent the cooker from tipping over, you must fix it
to the wall using the enclosed bracket. Please observe
the installation instructions for fixing the oven to the
wall.
Checking for leaks
After connecting the gas line, check the connections for
leaks using soapy water.
Initial use
Switch the appliance on as described in the instructions
for use. Light all the burners and check that the flames
remain stable at both the high and low settings.
Faults in the gas installation/smell of gas
If you notice a smell of gas or faults in the gas
installation, you must
■
■
■
■
■
immediately shut off the gas supply and/or close the
gas cylinder valve
immediately extinguish all naked flames and
cigarettes
switch off electrical appliances and lights
open windows and ventilate the room
call the after­sales service or the gas supplier
9
en
Installation and connection
Moving the appliance by the gas line or door handle
Do not move the appliance while holding the gas line;
the gas pipe could be damaged. There is a risk of a gas
leak! Do not move the appliance while holding it by the
door handle. The door hinges and door handle could
be damaged.
Electrical connection
The appliance must only be connected to the mains
electricity supply by specialist personnel. The appliance
must be installed in accordance with the most recent
IEE guidelines (Institute of Electrical Engineers). The
appliance may be damaged if it is not connected
correctly.
Make sure the voltage of the power supply matches the
value specified on the rating plate.
Make sure that the power supply is properly earthed
and that the fuse and the cable/wiring system in the
building is sufficiently dimensioned for the electrical
power of the appliance.
We recommend configuring the power circuit for the
appliance to 16 A.
Always observe the following when laying the
connection cable:
■
■
■
Do not pinch or squeeze the cable.
Keep the cable away from sharp edges.
Do not allow the cable to come into contact with
parts that can reach temperatures of over 50 °C
above room temperature.
>
E
Explanatory notes
1
Brown
2
Green and yellow
3
Blue
: Warning – Danger of death!
There is a risk of electric shock if you touch live
components.
■
Always make sure your hands are dry when you
touch or hold the mains plug.
■
Only pull out the mains cable by taking hold of the
plug and removing the plug; never pull it out by the
mains cable itself, as this could damage it.
■
Never unplug the mains plug when the appliance is
in operation.
Please note the following information and ensure that:
10
Notes
The mains plug fits the socket.
■
The cable cross section is adequate.
■
The earthing system is properly installed.
■
The mains cable is only replaced by a qualified
electrician (if this is necessary).Spare mains cables
can be ordered from our after-sales service.
■
No power strips/multi-way connectors or extension
cables are used.
■
If using a residual current device, only use one that
bears the mark z.
The presence of this mark is the only way to be sure
that it fulfils all the applicable regulations.
■
The mains plug can be accessed at all times.
■
The mains cable is not kinked, crushed, modified or
severed.
■
The mains cable does not come into contact with
heat sources.
■
Environmental protection
7Environmental protection
Your new appliance is particularly energy-efficient.
Here you can find tips on how to save even more
energy when using the appliance, and how to dispose
of your appliance properly.
Envi r onment al pr ot ect i on
Saving energy
■
■
■
■
Only preheat the oven if this is specified in the recipe
or in the tables in the instruction manual.
Use dark, black lacquered or enamelled baking tins,
because they absorb heat particularly well.
Open the oven door as infrequently as possible
while the food is baking and roasting.
For longer cooking times, the oven can be turned off
10 minutes before the end of the cooking time, and
the meal can be finished using residual heat.
en
*Getting to know your
appliance
In this section, we will explain the indicators and
controls. You will also find out about the various
functions of your appliance.
Get i ng t o know your ap l i ance
Note: Depending on the appliance model, individual
details and colours may differ.
Depending on the appliance model, individual details
may differ.
Saving energy with the gas hob
■
■
■
Always use a saucepan which is the correct size for
your food. A larger, less full saucepan requires a lot
of energy.
Always place a suitable lid on the saucepan.
The gas flame must always be in contact with the
base of the saucepan.
Environmentally-friendly disposal
Dispose of packaging in an environmentally-friendly
manner.
This appliance is labelled in accordance with
European Directive 2012/19/EU concerning
used electrical and electronic appliances
(waste electrical and electronic equipment WEEE). The guideline determines the
framework for the return and recycling of used
appliances as applicable throughout the EU.
Explanation
1
Hob cover
2
Hob
3
Control panel
4
Oven
5
Storage compartment
11
en
Getting to know your appliance
The control panel
Description
The hob
1
2
3
4
5
: Warning – Risk of burns!
Selector for the oven/gas grill
Selector for the oven
Selector for the fan, oven light and rotisserie spit
Electronic clock
Selector for the gas hotplates
Hot air flows out from the ventilation opening on the
hob. Never touch the ventilation opening.
Please note that, in the case of appliances with a hob
cover, the burners in the oven must also only be
switched on if the hob cover is open.
The electronic clock
With the electronic clock, you can set a cooking time.
An audible signal sounds once the cooking time has
elapsed.
Function buttons for the electronic clock
Symbol
+
Meaning
Minus
Plus
Use
Decreases the cooking
time or the time
Increases the cooking
time or the time
Description
1
High output burner (2.9 kW)
2
Wok burner (3.6 kW)
3
Standard output burner (1.65 kW)
4
Steam outlet
5
Economy burner (0.9 kW)
Types of gas burner
Gas burner
Economy burner
Standard output
burner
High output burner
Wok burner
12
Pot/pan diameter
12 - 18 cm
14 - 22 cm
22 - 26 cm
22 - 26 cm
Getting to know your appliance
Precautions for use
The following advice is intended to help you save
energy and prevent pan damage:
Use pans which are the
right size for each burner.
Do not use small pans on
large burners. The flame
must not touch the sides of
the pan.
Do not use damaged pans,
which do not sit evenly on
the hob. Pans may tip over.
Only use pans with a thick,
flat base.
Do not cook without using
a lid and make sure the lid
is properly fitted. This
wastes energy.
Always centre the pan over
the burner, not to one side.
Otherwise it could tip over.
Do not place large pans on
the burners near the
control knobs. These may
be damaged by the very
high temperatures.
Place the pans on the pan
supports, never directly on
the burner.
Make sure that the pan
supports and burner caps
are correctly positioned
before using the appliance.
Pans should be placed on
the hob carefully.
Do not strike the hob and
do not place excessive
weight on it.
Never use two burners or
heat sources to heat one
single pan.
Do not use grill pans,
earthenware casserole
dishes, etc. for a long
period of time on
maximum power.
Control knob for hotplates
This control knob is used to adjust the heat setting of
the gas burner hotplates.
The symbols above the control knob show you the gas
burner to which the control knob belongs.
Position
Û
˜
™
en
Oven
Description
1
Gas grill (3.1 kW)
2
Oven gas burner (4.2 kW)
Control knob for oven
This control knob is used to adjust the heat setting of
the oven.
Position
Meaning
Off. The oven is not heating up.
Û
140 - 280
Oven gas burner on, temperature range
in °C
There is a limit stop between positions 280 and Û. Do
not turn the control knob beyond this point.
Control knob for grill
This control knob is used to adjust the heat setting of
the grill.
Position
Û
˜
™
Meaning
Off. In this position, the grill does not heat
Large flame, highest setting
Economy flame, lowest setting
There is a limit stop between positions ™ and Û. Do not
turn the knob beyond this point.
Selector for the fan, oven light and rotisserie spit
You can use this to switch the fan, oven light and
rotisserie spit on and off.
Position Meaning
Off
Ú
4
3
3
Switching on the oven light
Switching on the rotisserie spit and oven light
Switching on the fan
Meaning
Off
Large flame, highest setting
Economy flame, lowest setting
13
en
Accessories
Fan position
Fan-assisted cooking enables heat to be distributed
evenly throughout the oven. The fan can be switched on
using the selector for the fan, oven light and rotisserie
spit.
Caution!
For safety reasons, the fan cannot be switched on when
the grill is in use.
_Accessories
Your appliance is accompanied by a range of
accessories. Here, you can find an overview of the
accessories included and information on how to use
them correctly.
Ac es or i es
Baking and roasting shelf
For ovenware, cake tins, joints of meat,
grilled items and frozen meals.
The cooking compartment
Universal pan
For moist cakes, pastries, frozen food
and large joints of meat. The universal
pan can be used to catch dripping fat
when grilling directly on the wire rack.
Coffee maker trivet
Coffee maker trivet; place on the economy burner.
The oven light is located in the cooking compartment.
Steam outlet
The hot air from the cooking compartment escapes at
the rear of the hob. Caution: do not cover the ventilation
slots. Otherwise the oven will overheat.
Cooling fan
The hot air escapes via the ventilation opening. This
cooling fan switches on and off as required. Caution!
Do not cover the ventilation slots. Otherwise the oven
will overheat.
Rotisserie spit
With spit adaptor and metal frame
For roasting joints and large items of
poultry.
The storage compartment
Open the storage compartment by folding down the
fascia panel.
This compartment can be used to store hob or oven
accessories.
: Warning – Risk of fire!
Never leave combustible items in the storage
compartment.
The baking tray and the baking and roasting shelf can
be moved into five different heights within the cooking
compartment. Always insert them as far as they will go
so that the accessories do not touch the door panel.
Ensure that you always insert the accessories into the
cooking compartment the right way round.
: Warning – Risk of fire!
Under no circumstances should a roasting tin, baking
tray, frying pan or any other form of cookware be
placed directly on the oven floor. This causes the floor
of the appliance to overheat and can seriously damage
the appliance.
14
Before using for the first time
KBefore using for the first
time
In this section, you can find out what you must do
before using your oven or hob to prepare food for the
first time. Read the following section beforehand.
~ "Important safety information" on page 5
Remove the appliance packaging and dispose of it
appropriately.
Bef or e usi ng f or t he f i r st t i me
Baking out the oven
Precleaning the oven
1. Remove accessories and hook-in racks from the
cooking compartment.
2. Fully remove any remaining packaging, such as
small pieces of polystyrene, from the cooking
compartment.
3. Some parts are covered with a protective film.
Remove the protective film.
4. Clean the outside of the appliance with a soft, damp
cloth.
5. Clean the cooking compartment with hot soapy
water.
Heating up the oven
To remove the new cooker smell, heat up the oven
when it is empty and closed.
1. Turn the temperature selector to the maximum
temperature.
2. Switch off the oven after 45 minutes.
Cleaning the burner caps and cups
$
%
&
en
1Operating the appliance
You have already learnt about the controls and how
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Oper at i ng t he ap l i ance
Hob
Switching on the gas burner
Notes
■
Appliances with a hob cover must only be switched
on if the hob cover is open.
■
The burner caps must always be positioned exactly
on top of the burner cups. The slots on the burner
cup must be free from obstruction. All parts must be
dry.
■
Ensure that the burner is not subjected to draughts
caused by air conditioning systems, fans or similar
appliances.
1. Press the control knob for the hotplate you require
and turn it to position ˜.
Gas will begin to flow out and the gas burner will
ignite.
2. Press and hold the control knob for a few seconds
until the flame stabilises.
3. Select the required setting.
Position
Û
˜
™
Meaning
Off
Large flame, highest setting
Economy flame, lowest setting
The flame is not stable between positions Û and
˜.Always select a position between ˜ and ™.
If the flame goes out
Switch off the control knob. Wait one minute and switch
the burner on again.
: Warning – Risk of fire!
If the flame goes out, gas will escape. Never leave the
gas burner unattended during operation. Ensure that
there are no draughts.
1. Clean the burner caps (A) and cups (B) with water
and washing-up liquid.
2. Dry the parts well.
3. Place the burner cup (B) onto the burner (C).
4. Position the burner cap (A) exactly on the burner
cup (B).
If the gas burner does not ignite
In the event of a power cut or damp ignition plugs, light
the gas burner with a gas lighter or a match.
Switching off the gas burner
Turn the control knob for the required hotplate to
position Û
Cleaning the accessories
Before using the accessories, clean them thoroughly
using a cloth and warm soapy water.
15
en
Operating the appliance
Oven
Operating the oven
Note that, in the case of appliances with a hob cover,
the burners in the oven must only be switched on if the
hob cover is open.
: Warning – Risk of overheating!
The cooling fan will not work without power. The
appliance could overheat. Never operate the oven
without power.
Oven lighting
Switching on the oven light
Turn the control knob to position 4.
Switching off the oven light
Turn the control knob to position Ú.
The oven light will now switch off.
Operating modes
The following operating modes are available:
Operating mode Use
Oven gas burner For cakes and pastries,
$
140 - 280 °C
bakes, poultry, lean joints of
meat, e.g. beef, veal and
game.
Gas grill
For steak, sausages, fish
(
and toasted sandwiches.
For cakes and pastries,
$ and Combi mode
(
(oven gas burner bakes, toasted sandwiches,
poultry, fish, joints of meat,
and grill gas
sausages and steak.
burner)
Fan position
For defrosting. For
3
defrosting meat, poultry,
bread and cakes. The fan
circulates the hot air around
the food.
When the oven gas burner
is switched on, the fan
circulates the hot air around
the food.
Operating the oven
Switching on the oven gas burner
1. Open the appliance door.
2. Press the selector on the oven and turn it to the
maximum position.
3. Press and hold the selector for a few seconds until
the flame stabilises.
4. Close the appliance door carefully.
If the flame goes out
Switch off the control knob. Wait one minute and switch
the burner on again.
: Warning – Risk of fire!
If the flame goes out, gas will escape. Never leave the
gas burner unattended during operation. Ensure that
there are no draughts.
Switching off the oven gas burner
Turn the control knob to the Û position. Press and hold
the control knob while doing this.
Operating the grill
The appliance door must be closed during grilling.
Note: When using the grill, a cooking time of
60 minutes must not be exceeded.
1. Open the appliance door.
2. Press and hold the control knob for the grill and turn
it to position ˜.
The gas burner will ignite.
3. Press and hold the control knob for a few seconds
until the flame stabilises.
4. Select the required setting.
Position
Û
˜
™
Meaning
Off. In this position, the grill does not heat
Large flame, highest setting
Economy flame, lowest setting
Note: The flame is not stable between positions Û
and ˜. Always select a position between ˜ and ™.
5. Close the appliance door carefully.
If the flame goes out
Switch off the control knob. Wait one minute and switch
the burner on again.
: Warning – Risk of fire!
If the flame goes out, gas will escape. Never leave the
gas burner unattended during operation. Ensure that
there are no draughts.
Switching off the grill
Turn the control knob to position Û.
16
Operating the appliance
Using combi mode
Rotary spit
Notes
■
The temperature range marked on the control knob
for the oven applies only when using conventional
heating. In combi mode, the temperature in the oven
is higher than the temperature that has been set.
■
When you use the gas grill on the lowest setting, you
must also set the oven to the lowest heat setting.
Preparing the rotary spit
en
1. Slide a retaining clip onto the rotary spit and screw
on the handle.
Switching on combination mode
1. Open the appliance door.
2. Press and hold the selector for the grill and turn it
3.
4.
5.
6.
7.
8.
anti-clockwise to the "Max." position.
The grill gas burner ignites. Press and hold the
selector for a few seconds until the flame stabilises.
Carefully close the appliance door.
Open the appliance door after 10 minutes.
Press and hold the selector for the oven and turn it
anti-clockwise to the maximum temperature.
The oven gas burner ignites. Press and hold the
selector for a few seconds until the flame stabilises.
Carefully close the appliance door.
Set the required temperature using the selector for
the grill and oven.
Wait 15 minutes for the oven to heat up. Carefully
open the appliance door and slide the baking try in.
2. Place the roast as close as possible to the centre of
the rotary spit.
3. Use retaining clips to secure the roast in place.
4. Use milled screws to secure the retaining clips.
Caution!
If the grill and oven gas burners are operating at the
same time (combined mode); When cooking with water,
the grill gas burner may go out due to the air circulation.
Notes
■
If the gas burner does not ignite within 15 seconds,
stop attempting to ignite the flame, open the oven
door and wait for 60 seconds.
■
If the flame goes out (but you have not deliberately
turned it off), turn the selector to the "Û" position and
wait for 60 seconds.
Switching on the grill
To achieve an extra gold top on certain dishes, the grill
can be switched on briefly at the end of the cooking
time when using conventional heating.
1. Open the appliance door.
2. Press and hold the selector for the grill and turn it
Inserting the rotisserie spit
: Warning – Risk of burns!
Never touch the hot surfaces of the cooking
compartment or the heating elements. Children must be
kept at a safe distance from the appliance at all times.
Open the appliance door carefully. Hot steam may
escape.
1. Push the rotisserie spit rack fully into the appliance
on shelf level 3.
2. Place the rotisserie spit onto the rotisserie spit rack
and unscrew the handle.
anti-clockwise to switch on the grill.
The grill gas burner ignites. Press and hold the
selector for a few seconds until the flame stabilises.
3. Use the selector for the grill to set the required
temperature.
4. Carefully close the appliance door.
Switching off combination mode
Turn the selector for the grill and oven to the Û position.
3. Push the rotisserie spit rack in fully.
17
en
Operating the appliance
4. Push the rotisserie spit rack to the right and into the
4. Hold the rotisserie spit on the right-hand side with a
5. Pour water into a baking tray and slide it in on shelf
5. Carefully lift the rotisserie spit off the rotisserie spit
motor adaptor.
level 1 to collect any fat that drips out.
6. Close the appliance door.
the oven.
Note: Preheat the oven with the ( heating function if
you are using the rotisserie spit.
3.
Note: Pour some water into the universal pan to catch
any fat that drips out.
Removing the rotisserie spit
: Warning – Risk of burns!
Never touch the hot surfaces of the cooking
compartment or the heating elements. Children must be
kept at a safe distance from the appliance at all times.
Open the appliance door carefully. Hot steam may
escape.
: Warning – Risk of burns!
Never directly touch the rotisserie spit or other
accessories when they are hot. Always use a pot holder
or wear oven gloves to handle accessories when they
are hot.
1. Open the appliance door carefully.
2. Pull the rotisserie spit rack with the metal frame to
the left and out of the motor adaptor.
3. Pull the rotisserie spit rack out of the oven as far as
possible.
18
rack.
6. Remove the rotary spit rack and the baking tray from
Switching on the rotary spit
1. Turn the control knob for the oven to position
2. Set the temperature.
pot holder and screw the grill onto the rotisserie spit.
Time-setting options
en
OTime-setting options
DCleaning
Setting the clock
Once the appliance has been connected to the mains
or after a power cut, "00:00" will flash on the display.
The current time must be set in order for the oven to be
switched on.
With good care and cleaning, your appliance will retain
its appearance and remain fully functioning for a long
time to come. We will explain here how you should
correctly care for and clean your appliance.
1. Press the "+" and "-" buttons at the same time.The
Do not use any high-pressure cleaners or steam
cleaners, which can result in an electric shock.
Ti me- set i ng opt i ons
settings can be configured once the Ú symbol starts
flashing on the display.
2. Use the "+" and "-" buttons to set the current time.
If the buttons are not pressed for a long time, the
symbols will stop flashing and the set time will appear
on the display.
Note: You can only use this clock as a kitchen timer. An
audible signal will sound once the set time has elapsed
– the oven will not be switched off.
Setting the timer
The timer has no effect on how the oven works. The
timer can be set to between 1 minute and 23 hours 59
minutes.
1. Press the "+" button. The
Cl eani ng
: Warning – Risk of electric shock!
Cleaning agents
Damage to the various different surfaces caused by
using the wrong cleaning agent can be avoided by
observing the following instructions.
When cleaning the hob do not use
■
undiluted washing-up liquid or dishwasher detergent,
■
scouring pads,
■
abrasive cleaning agents such as oven cleaner or
stain remover,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
V symbol will flash on the
display.
2. Use the "+" and "-" buttons to set the required time. If
the buttons are not pressed for a long time, the
symbols will stop flashing and the current time will
appear on the display.
3. An audible signal will sound once the time has
elapsed.
When cleaning the oven do not use
■
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
Switching off the audible signal
Press the "+" or "-" button to switch off the timer.
: Warning – Risk of burns!
Note: While the timer is active, the display will show the
current time.
Changing the audible signal
Pressing and holding the "-" button for 5 seconds while
the timer is showing the current time will make the clock
issue a warning signal. The clock has three different
audible signals. A different signal will sound each time
the "-" button is pressed. The last signal you selected is
saved as the default tone.
Wash new sponges thoroughly before first use.
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
Zone
Stainless steel surfaces*
(depending on appliance model)
Cleaning agent
Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth. On stainless steel surfaces, always wipe
parallel to the natural grain. Otherwise, you
may scratch the surface. Remove patches and
splashes of limescale, grease, starch and albumin (e.g. egg white) immediately. Corrosion
can form under such patches and splashes.
Special care products suitable for hot stainless
steel surfaces are available from our aftersales service and from specialist retailers.
Apply a thin layer of care product with a soft
cloth.
Enamel, painted, plas- Hot soapy water:
tic and screen-printed Clean with a dish cloth and dry with a soft
surfaces*
cloth. Do not use glass cleaner or glass scrap(depending on appli- ers for cleaning.
ance model)
* Optional (available for some appliances, depending on the appliance
model)
19
en
Cleaning
Zone
Control panel
Cleaning agent
Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth. Do not use glass cleaner or glass scrapers for cleaning.
Upper glass cover*
Glass cleaner:
(depending on appli- Clean with a soft cloth.
You can remove the upper glass cover for
ance model)
cleaning. To find out how to do this, please
refer to the section Upper glass cover.
Rotary knobs
Hot soapy water:
Do not remove.
Clean with a dish cloth and dry with a soft
cloth.
Hob surround
Hot soapy water:
Do not clean with a glass scraper, lemon juice
or vinegar.
Gas hob and pan sup- Hot soapy water.
ports*
Use very little water. Water must not be
(depending on appli- allowed to enter the appliance through the
base of the burners.
ance model)
Clean off boiled-over liquids and spilt food
immediately.
You can remove the pan supports.
Cast iron pan supports*:
Do not clean in the dishwasher.
Gas burners*
Remove the burner head and cap and clean
(depending on appli- with hot soapy water.
Do not clean in the dishwasher.
ance model)
The gas outlet openings must remain unobstructed at all times.
Ignition plugs: Small, soft brush.
The gas burners only work properly when the
ignition plugs are dry. Dry all parts thoroughly.
Ensure that they are refitted correctly.
The burner caps are coated in black enamel.
The colour may change over time. This does
not impair their performance.
Electric hotplate*
Abrasive materials or sponges:
(depending on appli- Briefly heat up the hotplate afterwards, so that
it dries. Hotplates can rust over time if they
ance model)
remain wet. Apply care product to finish.
Clean off boiled-over liquids and spilt food
immediately.
Hotplate ring*
Remove yellow to blue iridescent discoloura(depending on appli- tion from the hotplate ring with a steel care
product.
ance model)
Do not use any abrasive materials that may
scratch surfaces.
Ceramic hob*
Care: Protective/care products for ceramics
(depending on appli- Cleaning: Cleaning agents suitable for ceramics.
ance model)
Follow the cleaning instructions on the packaging.
Zone
Glass hob*
(depending on appliance model)
:Glass scraper for stubborn dirt:
Glass panel
Childproof lock*
(depending on appliance model)
Seal
Do not remove.
Cooking zone
*
20
Remove the protective cover and clean using
the blade only. Caution: The blade is very
sharp. Risk of injury.
Cover the blade again after cleaning. Replace
damaged blades immediately.
Glass cleaner:
Clean with a soft cloth.
Do not use the glass scraper.
The door can be removed to facilitate cleaning.
To find out how to do this, please refer to the
section Removing and refitting the
oven door.
Hot soapy water:
Clean with a dish cloth.
If a childproof lock has been fitted to the oven
door, it must be removed before cleaning.
If it is very dirty, the childproof lock will not
work properly.
Hot soapy water:
Clean with a dish cloth. Do not scour.
Hot soapy water or a vinegar solution:
Clean with a dish cloth.
For stubborn dirt, use a stainless steel scouring pad or oven cleaner.
Only use when the cooking compartment is
cold.
:Please use the self-cleaning function to
clean self-cleaning surfaces. To find out how to
do this, please refer to the section Selfcleaning.
Caution! Never use oven cleaner on self-cleaning surfaces.
Glass cover for the
oven light
Shelf
:Glass scraper for stubborn dirt:
Remove the protective cover and clean using
the blade only. Caution: The blade is very
sharp. Risk of injury.
Cover the blade again after cleaning. Replace
damaged blades immediately.
Optional (available for some appliances, depending on the appliance
model)
Cleaning agent
Care: Protective/care products for glass
Cleaning: Cleaning agents for glass.
Follow the cleaning instructions on the packaging.
*
Hot soapy water:
Clean with a dish cloth.
Hot soapy water:
Clean with a dish cloth or a brush.
You can remove the shelves for cleaning. To
find out how to do this, please refer to the section Removing and refitting shelves.
Telescoping extension rails*
(depending on appliance model)
Hot soapy water:
Clean with a dish cloth or a brush.
Do not remove the lubricant from the extension
rails. It is best to clean them when they are
pushed in. Do not soak, clean in the dishwasher, or clean in the oven as part of the selfcleaning programme. This may damage the
shelves and they may no longer work properly
as a result.
Optional (available for some appliances, depending on the appliance
model)
Cleaning
Zone
Accessories
Cleaning agent
Hot soapy water:
Soak and then clean with a dish cloth or a
brush.
Aluminium baking tray*:
(depending on appliance model)
Dry with a soft cloth.
Do not clean in the dishwasher.
Never use oven cleaner.
To prevent scratches, never touch the metal
surfaces with a knife or a similar sharp object.
Harsh cleaning products, scratchy sponges
and rough cleaning cloths are not suitable.
Otherwise, you may scratch the surface.
Rotary spit*
(depending on appliance model)
Hot soapy water:
Clean with a dish cloth or a brush. Do not clean
in the dishwasher.
Meat thermometer*
(depending on appliance model)
Hot soapy water:
Clean with a dish cloth or a brush. Do not clean
in the dishwasher.
Hot soapy water:
Clean with a dish cloth.
Plinth drawer*
(depending on appliance model)
* Optional (available for some appliances, depending on the appliance
model)
Notes
■
Slight differences in colour on the front of the
appliance are caused by the use of different
materials, such as glass, plastic and metal.
■
Shadows on the door panels, which look like
streaks, are caused by reflections made by the
interior lighting.
■
Enamel is baked on at very high temperatures.This
can cause some slight colour variation. This is
normal and does not affect operation.
The edges of thin trays cannot be completely
enamelled. As a result, these edges can be rough.
This does not impair the anti-corrosion protection.
en
Surfaces in the cooking compartment
The back wall and side parts in the cooking
compartment are self-cleaning. You can tell this from
the rough surface.
The cooking compartment floor and ceiling are
enamelled and have smooth surfaces.
Cleaning enamel surfaces
Clean the smooth enamel surfaces with a dish cloth
and hot soapy water or a vinegar solution. Then dry
them with a soft cloth.
Soften baked-on food remnants with a damp cloth and
soapy water. Use stainless steel wire wool or oven
cleaner to remove stubborn dirt.
Caution!
Never use oven cleaner in the cooking compartment
when it is still warm. This may damage the enamel.
Remove all food remnants from the cooking
compartment and the appliance door before you next
heat up the appliance.
Leave the cooking compartment open to dry after
cleaning it.
Note: Food residues can cause white deposits to form.
These are harmless and do not affect how the
appliance works. You can remove these residues using
lemon juice if required.
Cleaning self-cleaning surfaces
The self-cleaning surfaces are coated with a porous,
matte ceramic layer. While the appliance is in operation,
this layer sucks the splashes from baking and roasting
on and breaks it down.
If the self-cleaning surfaces no longer clean themselves
sufficiently and dark patches appear, they can be
cleaned by running a program specifically to heat them
up.
Setting
Remove the accessories, ovenware and rails from the
cooking compartment. Thoroughly clean the smooth
enamel surfaces in the cooking compartment, the
inside of the appliance door and the glass cover on the
interior lighting.
1. Set the oven gas burner to the maximum
temperature.
2. Start the program and leave it to run for at least 20–
30 minutes.
When the cooking compartment has cooled down,
remove the brown or white residue with water and a soft
sponge.
Caution!
Do not use oven cleaner on the self-cleaning surfaces.
This will damage the surfaces. If oven cleaner does get
onto these surfaces, clean them immediately using
water and a sponge cloth. Do not rub the surface and
do not use abrasive cleaning aids.
21
Appliance door
en
Detaching and refitting the rails
The rails can be removed for cleaning. The oven must
have cooled down.
qAppliance door
With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to clean the
appliance door.
Ap l i ance do r
Unhooking the rails
1. Hold the bottom of the rail and pull it towards you a
little. Pull the extension pins at the bottom of the rail
out of the fastening openings (figure A).
2. Then pull the rail upwards and remove it (figure B).
$
%
Detaching and attaching the oven door
For cleaning purposes and to remove the door panels,
you can detach the oven door.
The oven door hinges each have a locking lever. When
the locking levers are closed (figure A), the oven door
is secured in place. It cannot be detached. When the
locking levers are open in order to detach the oven
door (figure B), the hinges are locked. They cannot
snap shut.
$
%
Clean the rails with washing-up liquid and a sponge.
Use a brush to remove stubborn dirt deposits.
Hooking in the rails
1. Place the two hooks at the top of the rail into the
upper holes.
2. Both hooks must be inserted fully into the upper
holes. Now move the rail down slowly and carefully
and hook it into the lower holes.
3. Hook both rails into the side walls of the oven.
Keeping the appliance clean
Always keep the appliance clean and remove dirt
immediately so that stubborn deposits of dirt do not
build up.
: Warning – Risk of fire!
Loose food remnants, fat and meat juices may catch
fire. Before using the appliance, remove the worst of the
food remnants from the cooking compartment, heating
elements and accessories.
Tips
■
Clean the cooking compartment after each use. This
will ensure that dirt cannot be baked on.
■
Always remove flecks of limescale, grease, starch
and albumin (e.g. egg white) immediately.
■
Use the universal pan for baking very moist cakes.
■
Use suitable ovenware for roasting, e.g. a roasting
dish.
22
: Warning – Risk of injury!
Whenever the hinges are not locked, they snap shut
with great force. Ensure that the locking levers are
always fully closed or, when detaching the oven door,
fully open.
Detaching the door
1. Open the oven door fully.
2. Fold up the two locking levers on the left and right
(figure A).
3. Close the oven door as far as the limit stop. With
both hands, grip the door on the left and right-hand
sides. Close the door a little further and pull it out
(figure B).
$
%
Appliance door
en
Attaching the door
Reattach the oven door in the reverse sequence to
removal.
1. When attaching the oven door, ensure that both
hinges are inserted straight into the opening
(figure A).
2. The notch on the hinge must engage on both sides
(figure B).
$
%
3. Fold back both locking
levers (figure C). Close the oven door.
&
: Warning – Risk of injury!
Risk of injury. If the oven door falls out accidentally or a
hinge snaps shut, do not reach into the hinge. Call the
after­sales service.
23
en
Trouble shooting
3Trouble shooting
Faults often have simple explanations. Refer to the
table before calling the after-sales service, as you may
be able to remedy the fault yourself.
Tr oubl e sho t i ng
: Warning – Risk of injury!
Incorrect repairs may cause serious hazards. Repairs to
the appliance must only be carried out by a qualified
technician. If repairs are required, contact the aftersales service.
Fault table
Fault
The appliance is not working.
Possible cause
The circuit breaker is faulty
The oven light has failed.
Power cut
Faulty oven light
The gas burner will not ignite.
Power cut or damp ignition plugs
The flame (oven) does not burn through all
outlet openings.
All dishes that are cooked in the oven burn
within an extremely short period of time.
The door panel steams up when the oven is
hot.
The oven switches off.
Normal build-up of dirt
Remedy/information
Look in the fuse box and check that the circuit
breaker is in working order.
Check whether the kitchen light works.
Change the oven light bulb. (See section "Replacing
the oven light")
Light the gas burner with a gas lighter or a match.
Do not operate the oven without power.
The burner must be cleaned by a professional.
Faulty thermostat
Call the after-sales service.
Normal occurrence; caused by the difference in
temperature
The gas pressure is too high
Not possible; this has no effect on oven performance.
Check whether the correct pressure regulator is
being used.
Check the oven's power supply.
Power cut
Replacing the oven light bulb
If the bulb in the oven light fails, it must be replaced.
Replacement heat-resistant bulbs can be obtained from
the after-sales service or from specialist retailers.
Please supply your appliance's E number and FD
number. Do not use any other type of bulb.
4. Remove the glass cover for the defective oven light
in the cooking compartment.
: Warning – Risk of electric shock!
When replacing the cooking compartment bulb, the
bulb socket contacts are live. Before replacing the bulb,
unplug the appliance from the mains or switch off the
circuit breaker in the fuse box.
1. Pull out the mains plug or switch off the circuit
breaker.
2. Open the appliance door.
3. When the oven is cold, place a tea towel inside to
prevent damage.
24
5. Replace the oven light bulb with one of the same
type.
Voltage: 230 V;
Power: 25 W;
Thread: E14;
Temperature resistance: 300 °C
6. Put the glass cover for the oven light bulb back on.
7. Remove the tea towel and switch the circuit breaker
back on or plug the mains plug in again.
8. Switch on the oven light and check that it is working
correctly.
Customer service
en
4Customer service
Our after-sales service is there for you if your appliance
needs to be repaired. We will always find an
appropriate solution, also in order to avoid after-sales
personnel having to make unnecessary visits.
Cust omer ser vi ce
E number and FD number
When calling us, please give the product number (E
no.) and the production number (FD no.) so that we can
provide you with the correct advice. The rating plate
containing these numbers can be found on the righthand side of the oven door. You can make a note of the
numbers of your appliance and the telephone number
of the after-sales service in the space below to save
time should it be required.
E no.
FD no.
After-sales service O
Please note that there will be a fee for a visit by a
service technician in the event of a malfunction, even
during the warranty period.
After-sales contact details for all countries can be found
in the attached after-sales service directory.
25
6
6
#4))BVTHFSÉUF(NC)
$BSM8FSZ4US .ßODIFO
(&3."/:
TJFNFOTIPNFCTIHSPVQDPN
0DQXIDFWXUHGE\%6++DXVJHUlWH*PE+XQGHU7UDGHPDUN/LFHQVHRI6LHPHQV$*
*9001281553*
9001281553
04039905
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising