Siemens | HK9K9V850M | Instruction manual | Siemens Electric range cooker Stainless steel Instruction manual

Siemens Electric range cooker Stainless steel Instruction manual
Free standing cooker
HK9K9V850M
VLHPHQVKRPHEVKJURXSFRPZHOFRPH
[en]Instruction manual
5HJLVWHU
\RXU
SURGXFW
RQOLQH
en
Table of contents
[ en] I nst r uct i on manual
8 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
( Important safety information . . . . . . . . . . . . . . . 5
4 Customer service . . . . . . . . . . . . . . . . . . . . . . . . 23
E number and FD number . . . . . . . . . . . . . . . . . . . . .23
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
] Causes of damage . . . . . . . . . . . . . . . . . . . . . . . . 7
Hob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5 Installation and connection. . . . . . . . . . . . . . . . . 8
Measures to be noted during transport
Installation . . . . . . . . . . . . . . . . . . . . . .
Positioning and levelling. . . . . . . . . . . .
Electrical connection . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Produktinfo
Additional information on products, accessories,
replacement parts and services can be found at
www.siemens-home.bsh-group.com and in the online
shop www.siemens-home.bsh-group.com/eshops
.8
.8
.8
.9
7 Environmental protection . . . . . . . . . . . . . . . . . 10
Saving energy with your oven . . . . . . . . . . . . . . . . . . 10
Saving energy with the hob . . . . . . . . . . . . . . . . . . . . 10
Environmentally-friendly disposal . . . . . . . . . . . . . . . . 10
* Getting to know your appliance . . . . . . . . . . . . 11
The control panel . . . . . . .
The electronic clock . . . . .
The hob . . . . . . . . . . . . . .
The oven . . . . . . . . . . . . .
Cooling fan. . . . . . . . . . . .
The storage compartment
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 11
. 11
. 12
. 12
. 13
. 13
_ Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
K Before using for the first time. . . . . . . . . . . . . . 14
Cleaning the cooking compartment and accessories 14
1 Operating the appliance . . . . . . . . . . . . . . . . . . 14
Hob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Rotary spit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
O Time-setting options . . . . . . . . . . . . . . . . . . . . . 16
D Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Cleaning agents . . . . . . . . . . . . . . . . . .
Surfaces in the cooking compartment .
Detaching and refitting the rails . . . . . .
Keeping the appliance clean . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 18
. 20
. 20
. 20
q Appliance door . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Detaching and attaching the oven door . . . . . . . . . . . 21
3 Trouble shooting . . . . . . . . . . . . . . . . . . . . . . . . 22
Replacing the oven light bulb. . . . . . . . . . . . . . . . . . . 22
3
en
Intended use
8Intended use
Read these instructions carefully. Only then
will you be able to operate your appliance
safely and correctly. Retain the instruction
manual and installation instructions for future
use or for subsequent owners.
Check the appliance for damage after
unpacking it. Do not connect the appliance if it
has been damaged in transport.
Only a licensed professional may connect
appliances without plugs. Damage caused by
incorrect connection is not covered under
warranty.
This appliance is intended for domestic use
only. The appliance must only be used for the
preparation of food and drink. The appliance
must be supervised during operation. Only
use this appliance indoors.
This appliance is intended for use up to a
maximum height of 2000 metres above sea
level.
This appliance is not intended for operation
with an external clock timer or a remote
control.
Do not use covers. These can cause
accidents, for example due to overheating,
catching fire or materials shattering.
Only use safety devices or child protection
grilles approved by ourselves. Unsuitable
safety devices or child protection grilles may
result in accidents.
This appliance may be used by children over
the age of 8 years old and by persons with
reduced physical, sensory or mental
capabilities or by persons with a lack of
experience or knowledge if they are
supervised or are instructed by a person
responsible for their safety how to use the
appliance safely and have understood the
associated hazards.
I nt ended us e
4
Children must not play with, on, or around the
appliance. Children must not clean the
appliance or carry out general maintenance
unless they are at least 15 years old and are
being supervised.
Keep children below the age of 8 years old at
a safe distance from the appliance and power
cable.
Always slide accessories into the cooking
compartment the right way round.
~ "Accessories" on page 13
Important safety information
(Important safety
information
I mpor t ant saf et y i nf or mat i on
General information
: Warning – Risk of fire!
Combustible items stored in the cooking
compartment may catch fire. Never store
combustible items in the cooking
compartment. Never open the appliance
door if there is smoke inside. Switch off the
appliance and unplug it from the mains or
switch off the circuit breaker in the fuse box.
Risk
fire! is created when the appliance
■
A of
draught
door is opened. Greaseproof paper may
come into contact with the heating element
and catch fire. Do not place greaseproof
paper loosely over accessories during
preheating. Always weight down the
greaseproof paper with a dish or a baking
tin. Only cover the surface required with
greaseproof paper. Greaseproof paper
must not protrude over the accessories.
Risk
of oil
fire!
■
Hot
and fat can ignite very quickly. Never
leave hot fat or oil unattended. Never use
water to put out burning oil or fat. Switch off
the hotplate. Extinguish flames carefully
using a lid, fire blanket or something similar.
Risk
of fire!
■
The
hotplates become very hot. Never
place combustible items on the hob. Never
place objects on the hob.
Risk
of fire!
■
The
hob switches off automatically and can
no longer be operated. It may switch on
unintentionally at a later point. Switch off the
circuit breaker in the fuse box. Contact the
after-sales service.
Risk
of fire!
■
The
appliance becomes very hot and
flammable materials could catch fire. Never
store or use flammable objects (e.g. spray
cans, cleaning agents) under the appliance
or in its immediate vicinity. Never place
flammable items on or in the appliance.
Risk
of fire!
■
The
surfaces of the plinth drawer may
become very hot. Only store oven
accessories in the drawer. Flammable and
combustible objects must not be stored in
the plinth drawer.
■
en
: Warning – Risk of burns!
The appliance becomes very hot. Never
touch the interior surfaces of the cooking
compartment or the heating elements.
Always allow the appliance to cool down.
Keep children at a safe distance.
Risk
of serious burns!
■
Accessories
and ovenware become very
hot. Always use oven gloves to remove
accessories or ovenware from the cooking
compartment.
Risk
of burns!vapours may catch fire in the hot
■
Alcoholic
cooking compartment. Never prepare food
containing large quantities of drinks with a
high alcohol content. Only use small
quantities of drinks with a high alcohol
content. Open the appliance door with care.
Risk
of burns!
■
The
hotplates and surrounding area
(particularly the hob surround, if fitted)
become very hot. Never touch the hot
surfaces. Keep children at a safe distance.
Risk
of burns!
■
The
hotplate heats up but the display does
not work. Switch off the circuit breaker in
the fuse box. Contact the after-sales
service.
■
: Warning – Risk of scalding!
The accessible parts become hot during
operation. Never touch the hot parts. Keep
children at a safe distance.
Risk
of scalding!
■
When
you open the appliance door, hot
steam can escape. Steam may not be
visible, depending on its temperature. When
opening, do not stand too close to the
appliance. Open the appliance door
carefully. Keep children away.
Risk
of scalding!
■
Water
in a hot cooking compartment may
create hot steam. Never pour water into the
hot cooking compartment.
■
: Warning – Risk of injury!
Scratched glass in the appliance door may
develop into a crack. Do not use a glass
scraper, sharp or abrasive cleaning aids or
detergents.
Risk
of injury! may suddenly jump due to
■
Saucepans
liquid between the pan base and the
hotplate. Always keep the hotplate and
saucepan bases dry.
Risk
of injury!
■
If the
appliance is placed on a base and is
not secured, it may slide off the base. The
appliance must be fixed to the base.
Risk
of injury!
■
The
hinges on the appliance door move
when opening and closing the door, and
you may be trapped. Keep your hands away
from the hinges.
■
5
en
Important safety information
: Warning – Risk of tipping!
: Warning – Hazard due to magnetism!
Permanent magnets are used in the control
panel or in the control elements. They may
affect electronic implants, e.g. heart
pacemakers or insulin pumps. Wearers of
electronic implants must stay at least 10 cm
away from the control panel.
: Warning – Risk of overheating!
Warning: In order to prevent tipping of the
appliance, this stabilizing means must be
installed. Refer to the instructions for
installation.
: Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs
may only be carried out and damaged
power cables replaced by one of our
trained after-sales technicians. If the
appliance is defective, unplug the appliance
from the mains or switch off the circuit
breaker in the fuse box. Contact the aftersales service.
Risk
of electric
shock and serious
injury!
■
The
cable insulation
on electrical
appliances may melt when touching hot
parts of the appliance. Never bring
electrical appliance cables into contact with
hot parts of the appliance.
Risk
electric
■
Doofnot
use shock!
any high-pressure cleaners or
steam cleaners, which can result in an
electric shock.
Risk
of electric
shock!the cooking compartment
■
When
replacing
bulb, the bulb socket contacts are live.
Before replacing the bulb, unplug the
appliance from the mains or switch off the
circuit breaker in the fuse box.
Risk
electric shock!
■
A of
defective
appliance may cause electric
shock. Never switch on a defective
appliance. Unplug the appliance from the
mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.
Risk
of electric
shock! in the glass ceramic
■
Cracks
or fractures
may cause electric shocks. Switch off the
circuit breaker in the fuse box. Contact the
after-sales service.
■
6
Covering the ventilation openings in the floor
of the appliance may cause it to overheat.
Always install the appliance on the feet
supplied.
Causes of damage
]Causes of damage
Causes of damge
■
Hob
■
Caution!
■
Rough pot and pan bases scratch the ceramic.
■
Avoid boiling pots dry. This may cause damage.
■
en
Never place hot pots or pans on the control panel,
the display area or the surround. This may cause
damage.
Damage can occur if hard or pointed objects fall on
the hob.
Aluminium foil and plastic containers melt on hot
hotplates. Oven protective foil is not suitable for your
hob.
Overview
The following table provides an overview of the most
frequent kinds of damage:
Damage
Stains
Scratches
Discolouration
Blisters
Cause
Food spills
Unsuitable cleaning agents
Salt, sugar and sand
Rough pot and pan bases scratch the
ceramic.
Unsuitable cleaning agents
Pan abrasion (e.g. aluminium)
Sugar, food with a high sugar content
Action
Remove spills immediately with a glass scraper.
Only use cleaning agents which are suitable for ceramic
Do not use the hob as a work surface or storage space.
Check your cookware.
Only use cleaning agents which are suitable for ceramic
Lift the pots and pans when moving them.
Remove spills immediately with a glass scraper.
Oven
Caution!
■
Accessories, foil, greaseproof paper or ovenware on
the cooking compartment floor: do not place
accessories on the cooking compartment floor. Do
not cover the cooking compartment floor with any
sort of foil or greaseproof paper. Do not place
ovenware on the cooking compartment floor. This
will cause heat accumulation. The baking and
roasting times will no longer be correct and the
enamel will be damaged.
■
Inserting accessories: depending on the appliance
model, accessories can scratch the door panel
when closing the appliance door. Always insert the
accessories into the cooking compartment as far as
they will go.
■
Water in a hot cooking compartment: do not pour
water into the cooking compartment when it is hot.
This will cause steam. The temperature change can
cause damage to the enamel.
■
Moist food: do not store moist food in the cooking
compartment when it is closed for prolonged
periods This will damage the enamel.
■
Fruit juice: when baking particularly juicy fruit pies,
do not pack the baking tray too generously. Fruit
juice dripping from the baking tray leaves stains that
cannot be removed. If possible, use the deeper
universal pan.
■
■
■
■
■
Cooling with the appliance door open: only allow the
cooking compartment to cool when it is closed. Even
if the appliance door is only open a little, front panels
of adjacent units could be damaged over time.
Heavily soiled oven seal: if the oven seal is heavily
soiled, the oven door will no longer close properly
when the oven is in operation. The fronts of adjacent
units could be damaged. Always keep the oven seal
clean.
Oven door as a bearing surface: do not stand or
place objects on the oven door when it is open. Do
not hang objects on the oven door.
Carrying the appliance: do not carry or hold the
appliance by the door handle. The door handle
cannot support the weight of the appliance and
could break.
Heavy accessories: do not pull out heavily laden
accessories too far without first unloading them
sufficiently. Heavy accessories will tip when pulled
out. This causes pressure to be exerted on the shelf
supports in the cooking compartment, which can
damage the enamel. Relieve the strain on the
accessories when they are pulled out by raising
them slightly with one hand. Caution: always use an
oven cloth or oven gloves when handling hot
accessories.
7
en
Installation and connection
5Installation and connection
I n s t a l a t i o n a nd c o n e c t i o n
Measures to be noted during transport
Secure all mobile parts in and on the appliance using
an adhesive tape that can be removed without leaving
any traces. Push all accessories (e.g. baking tray) into
the corresponding slots with cardboard at the edges, in
order to avoid damaging the appliance. Place
cardboard or similar between the front and rear side to
prevent knocks against the inside of the glass door.
Secure the door and, if available, the top cover to the
appliance sides using adhesive tape.
Keep the original appliance packaging. Only transport
the appliance in the original packaging. Observe the
transport arrows on the packaging.
If the original packaging is no longer available
pack the appliance in protective packaging to
guarantee sufficient protection against any transport
damage.
Transport the appliance in an upright position. Do not
hold the appliance by the door handle or the
connections on the rear, as these could be damaged.
Do not place any heavy objects on the appliance.
Installation
This appliance is supplied with a set of adjustable feet
and a splatter guard.
Fitting the adjustable feet
1. Remove all parts that are not permanently fixed.
2. Remove any accessories from the oven.
3. Lift one side of the appliance off the floor and tilt it
Splatter guard
1. Open the packaging of the splatter guard and
remove the protective film.
2. Position the holes and place the splatter guard in
them.
3. Insert and tighten the screws from below.
Positioning and levelling
Positioning the appliance
When installing the appliance, make sure that there is
enough space in the final installation location to pull the
appliance forwards for cleaning and maintenance work.
The ground underneath must be hard and firm. The wall
immediately behind the appliance must be made from
non-flammable material, e.g. tiles.
If you need to move the appliance in order to position it,
make sure that the adjustable feet are fully screwed in.
Aligning the appliance
Turn the adjustable feet to align the appliance.
slightly.
4. Screw the adjustable feet into the mounting holes on
the underside of the appliance.
Note: If the appliance needs to be moved again,
screw the adjustable feet in fully.
5. Only finally level the appliance once the gas has
been connected and all of the installation work is
complete.
8
Note: Do not align the appliance until all other work has
been completed.
The adjustable feet can be used to elevate the
appliance by a maximum of 50 mm.
Check the alignment of the appliance once it has been
installed in the intended place.
Installation and connection
Adjacent units
Any adjacent units must not be made of flammable
materials. The fronts of any adjacent units must be heatresistant up to at least 90 °C. If the appliance is
installed very close to any other units, the minimum
clearances given in the figure must be maintained.
PLQ
PLQ
PLQ
PLQ
PLQ
Wall fixing
To prevent the cooker from tipping over, you must fix it
to the wall using the enclosed bracket. Please observe
the installation instructions for fixing the oven to the
wall.
Electrical connection
The appliance must only be connected to the power
supply by a licensed professional. The appliance must
be installed in accordance with the most recent IEE
guidelines (Institute of Electrical Engineers). The
appliance may be damaged if incorrectly connected.
Make sure the voltage of the power supply corresponds
to the specified value on the rating plate.
Ensure that the power supply is properly earthed and
that the fuse and the wiring and piping system in the
building is sufficiently dimensioned for the electrical
power of the appliance.
Observe the following points when routing the service
cable:
■
■
■
Do not pinch or squeeze the cable.
Keep the cable away from sharp edges.
Do not bring the cable into contact with parts that
can reach temperatures of more than 50 °C above
room temperature.
en
Notes
■
The mains plug fits the socket.
■
The cable cross section is adequate.
■
The earthing system is properly installed.
■
The mains cable is only replaced by a qualified
electrician (if this is necessary).Spare mains cables
can be ordered from our after-sales service.
■
No power strips/multi-way connectors or extension
cables are used.
■
If using a residual current device, only use one that
bears the mark z.
The presence of this mark is the only way to be sure
that it fulfils all the applicable regulations.
■
The mains plug can be accessed at all times.
■
The mains cable is not kinked, crushed, modified or
severed.
■
The mains cable does not come into contact with
heat sources.
The electric wires have the following colours.
Explanatory notes
Green and yellow
Earth <
Blue
Brown, black and grey
Neutral wire
Phase
Connecting the appliance
The appliance belongs to protection class 1 and must
only be operated with a protective earth connection.
The appliance must be disconnected from the power
supply whenever installation work is being carried out.
The appliance must only be connected using the power
cable provided.
When the appliance is installed, protection must be
provided against accidental contact in the future.
The appliance must only be connected to the mains
electricity supply by a specialist. This specialist must be
aware of and comply with the requirements stipulated
by the local energy supply company.
Any damage caused by the appliance being incorrectly
connected is not covered by the guarantee.
: Warning – Danger of death!
Caution!
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Please note the following information and ensure that:
Power cable without an earthed safety plug
The wiring must have an isolating switch with a contact
gap of at least 3 mm. Identify the phase and neutral
wires ("third wire") in the mains socket. The appliance
may be damaged if it is not connected correctly.
The mains power cable must be connected as shown in
the connection diagram.
The power cable must be H05 VV-F or H05 V2V2-F or
higher.
There is a risk of electric shock if you touch live
components.
■
Always make sure your hands are dry when you
touch or hold the mains plug.
■
Only pull out the mains cable by taking hold of the
plug and removing the plug; never pull it out by the
mains cable itself, as this could damage it.
■
Never unplug the mains plug when the appliance is
in operation.
Note: The appliance comes delivered configured for
connection to 3 phases. The power circuit must be
configured to 20 A.
9
en
Environmental protection
Connecting the appliance to 3 phases
For connection to 380-415 V with 3 phases + neutral
(3N~), the phase connection must be changed.
1. Use a 5 x 2,5 mm2 cable.
2. Configure the circuit to 20 A per phase.
7Environmental protection
Your new appliance is particularly energy-efficient.
Here you can find tips on how to save even more
energy when using the appliance, and how to dispose
of your appliance properly.
Envi r onment al pr ot ect i on
Connection diagram
Saving energy with your oven
/
1
■
/
/
■
■
■
+99)*PP1a
■
Only preheat the oven if this is specified in the recipe
or in the operating instruction tables.
Use dark, black lacquered or enamelled baking tins.
They absorb the heat particularly well.
Open the oven door as infrequently as possible
while cooking, baking or roasting.
It is best to bake more than one cake, one after the
other. The oven is still warm. This reduces the
baking time for the second cake. You can also place
two loaf tins next to each other.
For longer cooking times, you can switch the oven
off 10 minutes before the end of the cooking time
and use the residual heat to finish cooking.
Saving energy with the hob
■
■
■
■
■
■
■
Use pots and pans with thick, even bases. Uneven
bases increase energy consumption.
The diameter of pan bases should be the same size
as the hotplate. In particular, small saucepans on the
hotplate cause energy losses. Note that cookware
manufacturers often indicate the upper diameter of
the saucepan. This is usually bigger than the
diameter of the base of the pan.
Use a small saucepan for small quantities. A larger,
less full saucepan requires a lot of energy.
Always place suitable lids on saucepans. When
cooking without a lid, four times the energy is
required.
Cook with only a little water. This will save energy.
Vitamins and minerals in vegetables are preserved.
Switch to a lower heat setting in good time.
Use the residual heat. For longer cooking times, you
can switch the hotplate off 5-10 minutes before the
end of the cooking time.
Environmentally-friendly disposal
Dispose of packaging in an environmentally-friendly
manner.
This appliance is labelled in accordance with
European Directive 2012/19/EU concerning
used electrical and electronic appliances
(waste electrical and electronic equipment WEEE). The guideline determines the
framework for the return and recycling of used
appliances as applicable throughout the EU.
10
Getting to know your appliance
en
Note: Depending on the appliance model, individual
details and colours may differ.
*Getting to know your
appliance
Individual details may differ depending on the appliance
model.
In this chapter, we will explain the indicators and
controls. You will also find out about the various
functions of your appliance.
Get i ng t o know your ap l i ance
Description
1
Splatter guard
2
Hob
3
Control panel
4
Oven
5
Storage compartment
The control panel
Description
1
Function selector
2
Oven indicator light
3
Temperature selector
4
Electronic clock
5
Hotplate control
The electronic clock
With the electronic clock, you can set a cooking time.
An audible signal sounds once the cooking time has
elapsed.
Function buttons for the electronic clock
Symbol
0
Meaning
Electronic clock
-
Minus
+
Plus
Use
Sets the cooking time or
the time
Decreases the cooking
time or the time
Increases the cooking
time or the time
11
en
Getting to know your appliance
The hob
The oven
: Warning – Risk of burns!
In order to operate the oven, you require two operating
knobs: The function selector and the temperature
selector.
Please note that, in the case of appliances with a hob
cover, the burners in the oven must also only be
switched on if the hob cover is open.
Control knob for oven
Function selector
Use the function selector to set the heating function.
Hot air flows out from the ventilation opening on the
hob. Never touch the ventilation opening.
Û
4
?
Description
1
Dual-circuit hotplate 120 and 210 mm
2
Roasting zone 145 x 250 mm
3
Hotplate 145 mm
4
Ventilation opening
5
Hotplate 180 mm
6
Residual heat indicator
Control knob for hotplates
Use the control knobs to set the heat setting for the
individual hotplates.
Position
"Off" position
Û
Meaning
The hotplate is switched off.
1-6
1 = Lowest setting
6 = Highest setting
Switch on the large dual-circuit hotplate or the roasting zone.
Heat settings
ð, ç Zone activation
Residual heat indicator
The hob has a residual heat indicator for the hotplates.
It shows which hotplates are still hot. Even if the hob is
switched off, the indicator will remain lit until the relevant
hotplate has cooled down sufficiently.
You can save energy by using the residual heat to keep
a small dish warm, for example.
:
%
2
;
0
1
2
12
Heating function Use
"Off" position
In this position, the oven is
switched off.
Light
This switches on the light inside
the oven.
Defrost
For defrosting items such as
meat, poultry, bread and cakes.
The fan circulates hot air around
the food.
Hot air
For cakes and pastries.The fan
in the back panel distributes the
heat from the ring-shaped
heating element evenly around
the cooking compartment.
Top/bottom
For cooking cakes, bakes and
heating
joints of meat such as steak on a
single shelf. Heat is emitted
evenly from the heating elements
at the top and bottom.
Top/bottom
For cakes without toppings or
heating and fan fillings in tins, puff pastry and
joints.
Pizza setting
For quickly cooking frozen
products without preheating, e.g.
pizza, chips or puff pastry. Heat
is emitted by the bottom heating
element and the fan in the back
panel.
Grill, centre
Grilling: For cooking small
area/rotisserie amounts of steak, sausages,
spit
bread and fish.The centre part of
the grill heating element
becomes hot.
Rotisserie spit: For joints of
meat, rolled joints and poultry
Grill, full
Grill: For cooking steak,
surface/
sausages, bread and fish. The
rotisserie spit
whole area below the grill
element becomes hot.
Rotisserie spit: For joints of
meat, rolled joints and poultry
Hot air grill/
For cooking meat, poultry and
rotisserie spit
fish. The grill heating element
and the fan switch on and off
alternately. The fan circulates the
hot air from the grill around the
dish.
Rotisserie spit: For joints of
meat, rolled joints and poultry
Accessories
Temperature selector
Use the temperature selector to set the temperature.
_Accessories
Position
Your appliance is accompanied by a range of
accessories. Here, you can find an overview of the
accessories included and information on how to use
them correctly.
Û
Meaning
Off
50 - 250
Temperature range in °C
en
Ac es or i es
There is a limit stop between the "Max." and Û positions.
Do not turn the knob beyond this point.
Baking and roasting shelf
For ovenware, cake tins, joints of meat,
grilled items and frozen meals.
Cooling fan
Universal pan
For moist cakes, pastries, frozen food
and large joints of meat. The universal
pan can be used to catch dripping fat
when grilling directly on the wire rack.
Rotisserie spit
With spit adaptor and metal frame
For roasting joints and large items of
poultry.
The hot air escapes via the ventilation opening. This
cooling fan switches on and off as required. Caution!
Do not cover the ventilation slots. Otherwise the oven
will overheat.
The storage compartment
Open the storage compartment by folding down the
fascia panel.
The baking tray and the baking and roasting shelf can
be moved into five different heights within the cooking
compartment. Always insert them as far as they will go
so that the accessories do not touch the door panel.
Ensure that you always insert the accessories into the
cooking compartment the right way round.
This compartment can be used to store hob or oven
accessories.
: Warning – Risk of fire!
Never leave combustible items in the storage
compartment.
: Warning – Risk of fire!
Under no circumstances should a roasting tin, baking
tray, frying pan or any other form of cookware be
placed directly on the oven floor. This causes the floor
of the appliance to overheat and can seriously damage
the appliance.
13
en
Before using for the first time
KBefore using for the first
time
Before you can use your new appliance, you must
make some settings. You must also clean the cooking
compartment and accessories.
Bef or e usi ng f or t he f i r st t i me
Cleaning the cooking compartment and
accessories
Before using the appliance to prepare food for the first
time, you must clean the cooking compartment and
accessories.
Cleaning the cooking compartment
To eliminate the new-appliance smell, heat up the
cooking compartment when it is empty and with the
oven door closed.
Make sure that there is no leftover packaging, such as
polystyrene pellets, in the cooking compartment and
remove the adhesive tape that is in or on the appliance.
Before heating the appliance, wipe the smooth surfaces
in the cooking compartment with a soft, damp cloth.
Keep the kitchen ventilated while the appliance is
heating.
Apply the settings indicated below. You can find out
how to set the heating function and the temperature in
the next section. ~ "Operating the appliance"
on page 14
Settings
Heating function
3D Hotair :
Temperature
Time
maximum
1 hour
Switch off the appliance after the time indicated.
Once the cooking compartment has cooled down,
clean the smooth surfaces with soapy water and a dish
cloth.
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
14
1Operating the appliance
You have already learnt about the controls and how
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Oper at i ng t he ap l i ance
Hob
Switching the hob on and off
You can use the hotplate control knobs to switch the
hob on and off.
Applying hotplate settings
Use the hotplate control knobs to select the heat setting
for the hotplates. Press the control knob for the required
hotplate and turn it to the required heat setting.
Heat setting 1 = Lowest setting
Heat setting 6 = Highest setting
Note: Hotplate temperature is regulated by the heat
switching on and off.The heat may also switch on and
off at the highest setting.
This ensures e.g.:
■
sensitive components are protected from
overheating
■
the appliance is protected from electrical overload
■
better cooking results are achieved
Large dual-circuit hotplate and roasting zone
The size of these hotplates can be altered.
Switching on the large area
Turn the control knob to position 6 – where you will feel
a slight resistance – then continue turning to the õî
symbol = large dual-circuit hotplate or roasting zone
Then immediately turn it back to the required heat
setting.
Switching back to the small area
Turn the control knob to Û and configure again.
The small dual-circuit hotplate is particularly good for
heating small amounts of food.
Caution!
Never turn the knob beyond the õ/î symbol to Û.
Operating the appliance
Oven
Inserting the rotisserie spit
Operating the oven
Switching on the oven
: Warning – Risk of burns!
Note: Always keep the appliance door closed when it is
in operation.
1. Turn the function selector to the desired operating
mode.
2. Turn the temperature selector to set the desired
temperature.
The oven switches on.
en
Never touch the hot surfaces of the cooking
compartment or the heating elements. Children must be
kept at a safe distance from the appliance at all times.
Open the appliance door carefully. Hot steam may
escape.
1. Push the rotisserie spit rack fully into the appliance
on shelf level 3.
2. Place the rotisserie spit onto the rotisserie spit rack
and unscrew the handle.
The indicator lamp is lit when the oven is heating up. It
goes out during pauses in heating.
Note: The indicator lamp also lights up when the
function selector is in the off position and a temperature
is set. The oven only begins to heat up when an
operating mode is set.
Switching off the oven
1. Turn the function selector to the Û position.
2. Turn the temperature selector to the Û position.
The oven is switched off.
3. Push the rotisserie spit rack in fully.
4. Push the rotisserie spit rack to the right and into the
motor adaptor.
Rotary spit
Preparing the rotary spit
1. Slide a retaining clip onto the rotary spit and screw
on the handle.
5. Pour water into a baking tray and slide it in on shelf
level 1 to collect any fat that drips out.
6. Close the appliance door.
Switching on the rotary spit
2. Place the roast as close as possible to the centre of
Note: Insert the rotisserie spit. Set the oven to position
0, 1 or 2 .
3. Use retaining clips to secure the roast in place.
4. Use milled screws to secure the retaining clips.
1. Turn the function selector to position
2. Set the temperature.
the rotary spit.
0, 1 or 2.
Note: Pour some water into the universal pan to catch
any fat that drips out.
15
en
Time-setting options
Removing the rotisserie spit
: Warning – Risk of burns!
Never touch the hot surfaces of the cooking
compartment or the heating elements. Children must be
kept at a safe distance from the appliance at all times.
Open the appliance door carefully. Hot steam may
escape.
: Warning – Risk of burns!
Never directly touch the rotisserie spit or other
accessories when they are hot. Always use a pot holder
or wear oven gloves to handle accessories when they
are hot.
1. Open the appliance door carefully.
2. Pull the rotisserie spit rack with the metal frame to
the left and out of the motor adaptor.
OTime-setting options
Setting the clock
Once the appliance has been connected to the mains
or after a power cut, the "A" symbol and "00:00" will
flash on the display. The current time must be set in
order for the oven to be switched on.
Ti me- set i ng opt i ons
1. Press the "+" and "-" buttons at the same time or just
press the 0 button. The Û symbol will appear on
the display. The settings can be configured once the
Ú symbol starts flashing on the display.
2. Use the "+" and "-" buttons to set the current time.
If the buttons are not pressed for a long time, the
symbols will stop flashing and the display will show the
set time.
Note: The function selector, the temperature selector
and the clock must be set before using the
oven.Otherwise, the oven will not switch on.
Setting the timer
The timer has no effect on how the oven works. The
timer can be set to between 1 minute and 23 hours 59
minutes.
1. Press the
3. Pull the rotisserie spit rack out of the oven as far as
possible.
4. Hold the rotisserie spit on the right-hand side with a
pot holder and screw the grill onto the rotisserie spit.
0 button. The V symbol will flash on the
display.
2. Use the "+" and "-" buttons to set the required time. If
the buttons are not pressed for a long time, the
symbols will stop flashing and the display will show
the current time.
3. An audible signal will sound once the time has
elapsed. Press the 0 button to switch off the timer.
Semi-automatically programming the cooking time
You can programme a different cooking time for each
dish on the oven. The oven will switch off automatically
at the end of the cooking time. This means that you do
not have to stop what you are doing to switch off the
oven, and prevents the food from accidentally being
cooked for too long.
5. Carefully lift the rotisserie spit off the rotisserie spit
rack.
6. Remove the rotary spit rack and the baking tray from
the oven.
1. Use the function selector to set the heating function.
2. Use the temperature selector to set the temperature.
3. Press the 0 button repeatedly until "dur" appears on
the display. When "dur" appears, the "A" symbol,
"00:00" and the z symbol will flash on the display.
4. Use the "+" and "-" buttons to set the cooking time.
5. The current time will appear and the "A" symbol and
the z symbol will be lit continuously on the display.
The oven will now heat.
End of the cooking time
An audible signal will sound once the set time has
elapsed. Use the 0 button to switch off the timer.
16
Time-setting options
Semi-automatically programming the switch-off time
This function allows you to set the end of the cooking
time for your food. The oven will switch off automatically
at the end of the cooking time. This means that you do
not have to stop what you are doing to switch off the
oven, and prevents the food from accidentally being
cooked for too long.
1. Use the function selector to set the heating function.
2. Use the temperature selector to set the temperature.
3. Press the 0 button repeatedly until "end" appears
on the display. When "end" appears, the symbol "A",
the current time and the z symbol will flash on the
display.
4. Use the "+" and "-" buttons to set the end of the
cooking time.
5. The current time will appear and the "A" symbol and
the z symbol will be lit continuously on the display.
The oven will now heat.
End of the cooking time
en
Cancelling programming
Pressing the "+" and "-" buttons at the same time for 2
seconds will cancel any fully automatic or semiautomatic programmes that have been set.
Note: This does not apply to timer volume setting.
Changing the audible signal
Pressing and holding the "-" button for 5 seconds while
the timer is showing the current time will make the clock
issue a warning signal. The clock has three different
audible signals. A different signal will sound each time
the "-" button is pressed. The last signal you selected is
saved as the default tone.
An audible signal will sound when the set switch-off
time has been reached. Use the 0 button to switch off
the timer.
Fully automatic programming
The oven can be programmed to the time at which the
dish is expected to be ready. The oven will switch itself
on automatically and switch itself off again at the
required time. This means that you can, for example,
place a dish in the cooking compartment in the morning
and programme it so that the dish will be ready at
midday.
Make sure that food is not left in the cooking
compartment for too long as it may spoil.
1. Set the cooking time as described in the section
entitled "Semi-automatically programming the
cooking time".
2. Set the end of the cooking time as described in the
section entitled "Semi-automatically programming
the switch-off time".
The oven will switch itself on at the right time for the
cooking time length and off again at the switch-off time
that has been set.The "A", z and x symbols will light
up and stay lit.
Once the oven has switched itself on, the "A" symbol
and the z symbol will be lit continuously on the
display.
An audible signal will sound when the oven is switched
off.
End of the cooking time
Use the 0 button to switch off the timer.
17
en
Cleaning
DCleaning
With good care and cleaning, your appliance will retain
its appearance and remain fully functioning for a long
time to come. We will explain here how you should
correctly care for and clean your appliance.
Cl eani ng
: Warning – Risk of electric shock!
Do not use any high-pressure cleaners or steam
cleaners, which can result in an electric shock.
Cleaning agents
Damage to the various different surfaces caused by
using the wrong cleaning agent can be avoided by
observing the following instructions.
When cleaning the hob do not use
■
undiluted washing-up liquid or dishwasher detergent,
■
scouring pads,
■
abrasive cleaning agents such as oven cleaner or
stain remover,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
When cleaning the oven do not use
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
■
Wash new sponges thoroughly before first use.
: Warning – Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
Zone
Stainless steel surfaces*
(depending on appliance model)
Cleaning agent
Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth. On stainless steel surfaces, always wipe
parallel to the natural grain. Otherwise, you
may scratch the surface. Remove patches and
splashes of limescale, grease, starch and albumin (e.g. egg white) immediately. Corrosion
can form under such patches and splashes.
Special care products suitable for hot stainless
steel surfaces are available from our aftersales service and from specialist retailers.
Apply a thin layer of care product with a soft
cloth.
Enamel, painted, plas- Hot soapy water:
tic and screen-printed Clean with a dish cloth and dry with a soft
surfaces*
cloth. Do not use glass cleaner or glass scrap(depending on appli- ers for cleaning.
ance model)
* Optional (available for some appliances, depending on the appliance
model)
18
Zone
Control panel
Cleaning agent
Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth. Do not use glass cleaner or glass scrapers for cleaning.
Upper glass cover*
Glass cleaner:
(depending on appli- Clean with a soft cloth.
You can remove the upper glass cover for
ance model)
cleaning. To find out how to do this, please
refer to the section Upper glass cover.
Rotary knobs
Hot soapy water:
Do not remove.
Clean with a dish cloth and dry with a soft
cloth.
Hob surround
Hot soapy water:
Do not clean with a glass scraper, lemon juice
or vinegar.
Gas hob and pan sup- Hot soapy water.
ports*
Use very little water. Water must not be
(depending on appli- allowed to enter the appliance through the
base of the burners.
ance model)
Clean off boiled-over liquids and spilt food
immediately.
You can remove the pan supports.
Cast iron pan supports*:
Do not clean in the dishwasher.
Gas burners*
Remove the burner head and cap and clean
(depending on appli- with hot soapy water.
Do not clean in the dishwasher.
ance model)
The gas outlet openings must remain unobstructed at all times.
Ignition plugs: Small, soft brush.
The gas burners only work properly when the
ignition plugs are dry. Dry all parts thoroughly.
Ensure that they are refitted correctly.
The burner caps are coated in black enamel.
The colour may change over time. This does
not impair their performance.
Electric hotplate*
Abrasive materials or sponges:
(depending on appli- Briefly heat up the hotplate afterwards, so that
it dries. Hotplates can rust over time if they
ance model)
remain wet. Apply care product to finish.
Clean off boiled-over liquids and spilt food
immediately.
Hotplate ring*
Remove yellow to blue iridescent discoloura(depending on appli- tion from the hotplate ring with a steel care
product.
ance model)
Do not use any abrasive materials that may
scratch surfaces.
Ceramic hob*
Care: Protective/care products for ceramics
(depending on appli- Cleaning: Cleaning agents suitable for ceramics.
ance model)
Follow the cleaning instructions on the packaging.
:Glass scraper for stubborn dirt:
*
Remove the protective cover and clean using
the blade only. Caution: The blade is very
sharp. Risk of injury.
Cover the blade again after cleaning. Replace
damaged blades immediately.
Optional (available for some appliances, depending on the appliance
model)
Cleaning
Zone
Glass hob*
(depending on appliance model)
Cleaning agent
Care: Protective/care products for glass
Cleaning: Cleaning agents for glass.
Follow the cleaning instructions on the packaging.
:Glass scraper for stubborn dirt:
Glass panel
Childproof lock*
(depending on appliance model)
Seal
Do not remove.
Cooking zone
Remove the protective cover and clean using
the blade only. Caution: The blade is very
sharp. Risk of injury.
Cover the blade again after cleaning. Replace
damaged blades immediately.
Glass cleaner:
Clean with a soft cloth.
Do not use the glass scraper.
The door can be removed to facilitate cleaning.
To find out how to do this, please refer to the
section Removing and refitting the
oven door.
Hot soapy water:
Clean with a dish cloth.
If a childproof lock has been fitted to the oven
door, it must be removed before cleaning.
If it is very dirty, the childproof lock will not
work properly.
Hot soapy water:
Clean with a dish cloth. Do not scour.
Hot soapy water or a vinegar solution:
Clean with a dish cloth.
For stubborn dirt, use a stainless steel scouring pad or oven cleaner.
Only use when the cooking compartment is
cold.
:Please use the self-cleaning function to
clean self-cleaning surfaces. To find out how to
do this, please refer to the section Selfcleaning.
Caution! Never use oven cleaner on self-cleaning surfaces.
Glass cover for the
oven light
Shelf
*
Hot soapy water:
Clean with a dish cloth.
Hot soapy water:
Clean with a dish cloth or a brush.
You can remove the shelves for cleaning. To
find out how to do this, please refer to the section Removing and refitting shelves.
Telescoping extension rails*
(depending on appliance model)
Hot soapy water:
Clean with a dish cloth or a brush.
Do not remove the lubricant from the extension
rails. It is best to clean them when they are
pushed in. Do not soak, clean in the dishwasher, or clean in the oven as part of the selfcleaning programme. This may damage the
shelves and they may no longer work properly
as a result.
Zone
Accessories
en
Cleaning agent
Hot soapy water:
Soak and then clean with a dish cloth or a
brush.
Aluminium baking tray*:
(depending on appliance model)
Dry with a soft cloth.
Do not clean in the dishwasher.
Never use oven cleaner.
To prevent scratches, never touch the metal
surfaces with a knife or a similar sharp object.
Harsh cleaning products, scratchy sponges
and rough cleaning cloths are not suitable.
Otherwise, you may scratch the surface.
Rotary spit*
(depending on appliance model)
Hot soapy water:
Clean with a dish cloth or a brush. Do not clean
in the dishwasher.
Meat thermometer*
(depending on appliance model)
Hot soapy water:
Clean with a dish cloth or a brush. Do not clean
in the dishwasher.
Hot soapy water:
Clean with a dish cloth.
Plinth drawer*
(depending on appliance model)
* Optional (available for some appliances, depending on the appliance
model)
Notes
■
Slight differences in colour on the front of the
appliance are caused by the use of different
materials, such as glass, plastic and metal.
■
Shadows on the door panels, which look like
streaks, are caused by reflections made by the
interior lighting.
■
Enamel is baked on at very high temperatures.This
can cause some slight colour variation. This is
normal and does not affect operation.
The edges of thin trays cannot be completely
enamelled. As a result, these edges can be rough.
This does not impair the anti-corrosion protection.
Optional (available for some appliances, depending on the appliance
model)
19
en
Cleaning
Surfaces in the cooking compartment
Detaching and refitting the rails
The back wall and side parts in the cooking
compartment are self-cleaning. You can tell this from
the rough surface.
The cooking compartment floor and ceiling are
enamelled and have smooth surfaces.
The rails can be removed for cleaning. The oven must
have cooled down.
Cleaning enamel surfaces
Clean the smooth enamel surfaces with a dish cloth
and hot soapy water or a vinegar solution. Then dry
them with a soft cloth.
Soften baked-on food remnants with a damp cloth and
soapy water. Use stainless steel wire wool or oven
cleaner to remove stubborn dirt.
Caution!
Never use oven cleaner in the cooking compartment
when it is still warm. This may damage the enamel.
Remove all food remnants from the cooking
compartment and the appliance door before you next
heat up the appliance.
Leave the cooking compartment open to dry after
cleaning it.
Note: Food residues can cause white deposits to form.
These are harmless and do not affect how the
appliance works. You can remove these residues using
lemon juice if required.
Cleaning self-cleaning surfaces
The self-cleaning surfaces are coated with a porous,
matte ceramic layer. While the appliance is in operation,
this layer sucks the splashes from baking and roasting
on and breaks it down.
If the self-cleaning surfaces no longer clean themselves
sufficiently and dark patches appear, they can be
cleaned by running a program specifically to heat them
up.
Setting
Remove the accessories, ovenware and rails from the
cooking compartment. Thoroughly clean the smooth
enamel surfaces in the cooking compartment, the
inside of the appliance door and the glass cover on the
interior lighting.
1. Set "Hot air/rotary spit grilling" as the type of heating.
2. Set the maximum temperature.
3. Start the program and leave it to run for at least 20–
30 minutes.
When the cooking compartment has cooled down,
remove the brown or white residue with water and a soft
sponge.
Caution!
Do not use oven cleaner on the self-cleaning surfaces.
This will damage the surfaces. If oven cleaner does get
onto these surfaces, clean them immediately using
water and a sponge cloth. Do not rub the surface and
do not use abrasive cleaning aids.
20
Unhooking the rails
1. Hold the bottom of the rail and pull it towards you a
little. Pull the extension pins at the bottom of the rail
out of the fastening openings (figure A).
2. Then pull the rail upwards and remove it (figure B).
$
%
Clean the rails with washing-up liquid and a sponge.
Use a brush to remove stubborn dirt deposits.
Hooking in the rails
1. Place the two hooks at the top of the rail into the
upper holes.
2. Both hooks must be inserted fully into the upper
holes. Now move the rail down slowly and carefully
and hook it into the lower holes.
3. Hook both rails into the side walls of the oven.
Keeping the appliance clean
Always keep the appliance clean and remove dirt
immediately so that stubborn deposits of dirt do not
build up.
: Warning – Risk of fire!
Loose food remnants, fat and meat juices may catch
fire. Before using the appliance, remove the worst of the
food remnants from the cooking compartment, heating
elements and accessories.
Tips
■
Clean the cooking compartment after each use. This
will ensure that dirt cannot be baked on.
■
Always remove flecks of limescale, grease, starch
and albumin (e.g. egg white) immediately.
■
Use the universal pan for baking very moist cakes.
■
Use suitable ovenware for roasting, e.g. a roasting
dish.
Appliance door
qAppliance door
With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to clean the
appliance door.
Ap l i ance do r
Detaching and attaching the oven door
For cleaning purposes and to remove the door panels,
you can detach the oven door.
The oven door hinges each have a locking lever. When
the locking levers are closed (figure A), the oven door
is secured in place. It cannot be detached. When the
locking levers are open in order to detach the oven
door (figure B), the hinges are locked. They cannot
snap shut.
$
%
en
Attaching the door
Reattach the oven door in the reverse sequence to
removal.
1. When attaching the oven door, ensure that both
hinges are inserted straight into the opening
(figure A).
2. The notch on the hinge must engage on both sides
(figure B).
$
%
3. Fold back both locking
levers (figure C). Close the oven door.
&
: Warning – Risk of injury!
Whenever the hinges are not locked, they snap shut
with great force. Ensure that the locking levers are
always fully closed or, when detaching the oven door,
fully open.
Detaching the door
: Warning – Risk of injury!
Risk of injury. If the oven door falls out accidentally or a
hinge snaps shut, do not reach into the hinge. Call the
after­sales service.
1. Open the oven door fully.
2. Fold up the two locking levers on the left and right
(figure A).
3. Close the oven door as far as the limit stop. With
both hands, grip the door on the left and right-hand
sides. Close the door a little further and pull it out
(figure B).
$
%
21
en
Trouble shooting
3Trouble shooting
technician. If repairs are required, contact the aftersales service.
:Warning – Risk of injury!
Incorrect repairs may cause serious hazards. Repairs to
the appliance must only be carried out by a qualified
Tr oubl e sho t i ng
Fault table
Fault
The appliance does not work.
Possible cause
The circuit breaker is faulty
Zeros flash in the display.
The oven light has failed.
Power cut
Power cut
Faulty oven light
The oven does not heat up.
Faulty fuse.
The function selector has not been set.
All dishes that are prepared in the oven burn Faulty thermostat
within an extremely short period of time.
The door panel steams up when the oven is Normal occurrence; caused by the difference in
hot.
temperature
Replacing the oven light bulb
If the bulb in the oven light fails, it must be replaced.
Replacement heat-resistant bulbs can be obtained from
the after-sales service or from specialist retailers.
Please supply your appliance's E number and FD
number. Do not use any other type of bulb.
Remedy/information
Look in the fuse box and check that the circuit
breaker is in working order.
Check whether the kitchen light works.
Reset the time.
Change the oven light bulb. (See section "Replacing
the oven light")
Check and, if required, replace the circuit breaker.
Set the function selector.
Call the after-sales service.
Not possible; this has no effect on oven performance.
4. Remove the glass cover for the defective oven light
in the cooking compartment.
: Warning – Risk of electric shock!
When replacing the cooking compartment bulb, the
bulb socket contacts are live. Before replacing the bulb,
unplug the appliance from the mains or switch off the
circuit breaker in the fuse box.
1. Pull out the mains plug or switch off the circuit
breaker.
2. Open the appliance door.
3. When the oven is cold, place a tea towel inside to
prevent damage.
22
5. Replace the oven light bulb with one of the same
type.
Voltage: 230 V;
Power: 25 W;
Thread: E14;
Temperature resistance: 300 °C
6. Put the glass cover for the oven light bulb back on.
7. Remove the tea towel and switch the circuit breaker
back on or plug the mains plug in again.
8. Switch on the oven light and check that it is working
correctly.
Customer service
en
4Customer service
Our after-sales service is there for you if your appliance
needs to be repaired. We will always find an
appropriate solution, also in order to avoid after-sales
personnel having to make unnecessary visits.
Cust omer ser vi ce
E number and FD number
When calling us, please give the product number (E
no.) and the production number (FD no.) so that we can
provide you with the correct advice. The rating plate
containing these numbers can be found on the righthand side of the oven door. You can make a note of the
numbers of your appliance and the telephone number
of the after-sales service in the space below to save
time should it be required.
E no.
FD no.
After-sales service O
Please note that there will be a fee for a visit by a
service technician in the event of a malfunction, even
during the warranty period.
After-sales contact details for all countries can be found
in the attached after-sales service directory.
23
%6++DXVJHUlWH*PE+
&DUO:HU\6WU0QFKHQ
*(50$1<
VLHPHQVKRPHEVKJURXSFRP
0DQXIDFWXUHGE\%6++DXVJHUlWH*PE+XQGHU7UDGHPDUN/LFHQVHRI6LHPHQV$*
*9001281551*
9001281551
02049803
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising