Siemens | KI81FHD40 | Instructions for use | Siemens iQ700 Built-in fridge 177.5 x 56 cm Instructions for Use

Siemens iQ700 Built-in fridge 177.5 x 56 cm Instructions for Use
5HIULJHUDWRU
KIF81H....
en
User manual
en
en Table of contents
en User manual
(
Safety instructions . . . . . . . . . . . 3
About these instructions . . . . . . . . . . . 3
Risk of explosion . . . . . . . . . . . . . . . . . 3
Risk of electric shock . . . . . . . . . . . . . 3
Risk of injury . . . . . . . . . . . . . . . . . . . . 4
Fire hazard/Danger due to
refrigerants . . . . . . . . . . . . . . . . . . . . . 4
Fire hazard. . . . . . . . . . . . . . . . . . . . . . 4
Avoiding placing children and
vulnerable people at risk . . . . . . . . . . . 4
Damage . . . . . . . . . . . . . . . . . . . . . . . . 5
Weight . . . . . . . . . . . . . . . . . . . . . . . . . 5
8 Intended use . . . . . . . . . . . . . . . . 5
7 Environmental protection . . . . . 5
Packaging . . . . . . . . . . . . . . . . . . . . . . 5
Old appliances . . . . . . . . . . . . . . . . . . 5
5 Installation and connection . . . . 6
Scope of supply. . . . . . . . . . . . . . . . . . 6
Technical specifications. . . . . . . . . . . . 6
Installing the appliance . . . . . . . . . . . . 6
Cavity dimensions . . . . . . . . . . . . . . . . 6
Tips for saving energy . . . . . . . . . . . . . 7
Before using your appliance for the first
time . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Electrical connection . . . . . . . . . . . . . . 8
* Getting to know your
appliance . . . . . . . . . . . . . . . . . . . 8
Appliance. . . . . . . . . . . . . . . . . . . . . . . 8
Controls . . . . . . . . . . . . . . . . . . . . . . . . 9
Interior fittings . . . . . . . . . . . . . . . . . . . 9
1 Operating the appliance. . . . . . 10
Switching on the appliance . . . . . . .
Switching off and disconnecting the
appliance . . . . . . . . . . . . . . . . . . . . .
Setting the temperature . . . . . . . . . .
Super cooling . . . . . . . . . . . . . . . . .
2
.10
.10
.10
.10
M Alarm . . . . . . . . . . . . . . . . . . . . . .11
Door alarm . . . . . . . . . . . . . . . . . . . . 11
o Home Connect . . . . . . . . . . . . . .11
Setting up Home Connect . . . . .
Installing updates for the Home
Connect software . . . . . . . . . . . .
Information on data protection . .
Declaration of conformity . . . . . .
. . . 11
. . . 13
. . . 13
. . . 14
U Refrigerator compartment. . . . .14
Note when storing food . . . . . . . . . . 14
Note the chill zones in the
refrigerator compartment . . . . . . . . . 15
T Cool-fresh compartment . . . . . .15
Vegetable container . . . . . . . . . . . . . 15
Cool-fresh container . . . . . . . . . . . . . 15
Storage times at 0 °C . . . . . . . . . . . 16
= Defrosting . . . . . . . . . . . . . . . . . .16
Refrigerator compartment . . . . . . . . 16
D Cleaning . . . . . . . . . . . . . . . . . . .16
Cleaning the equipment . . . . . . . . . . 16
l Odours . . . . . . . . . . . . . . . . . . . .17
9 Lighting . . . . . . . . . . . . . . . . . . . .17
> Noises . . . . . . . . . . . . . . . . . . . . .17
Normal noises . . . . . . . . . . . . . . . . . 17
Preventing noises . . . . . . . . . . . . . . . 17
3 Faults – what to do? . . . . . . . . .18
4 Customer service . . . . . . . . . . . .19
Appliance self-test . . . . . . . . . . . . . . 19
Repair order and advice on faults . . 19
Guarantee . . . . . . . . . . . . . . . . . . . . 19
Safety instructions en
( Safety instructions
This appliance complies with
the relevant safety regulations
for electrical appliances and is
fitted with noise suppression.
The refrigeration circuit has
been checked for leaks.
■
Saf et y i nst r uct i ons
About these instructions
■
■
■
Read and follow the
operating and installation
instructions. They contain
important information on how
to install, use and maintain
the appliance.
The manufacturer is not
liable if you disregard the
instructions and warnings in
the operating and installation
instructions.
Retain all documents for
subsequent use or for the
next owner.
Risk of explosion
■
■
Never use electric
appliances inside the
appliance (e.g. heaters or
electric ice makers).
Do not store products which
contain flammable propellant
(e.g. spray cans) or
explosive substances in the
appliance.
■
Store high-percentage
alcohol tightly sealed and in
an upright position.
Do not use additional means
to accelerate the defrosting
process other than those
recommended by the
manufacturer.
Risk of electric shock
Improper installations and
repairs may put the user at
considerable risk.
■
When installing the
appliance, ensure that the
mains cable is not trapped or
damaged.
■
If the mains cable is
damaged: immediately
disconnect the appliance
from the electricity supply.
■
Do not use multiple sockets,
extension leads or adapters.
■
Have the appliance repaired
by the manufacturer,
Customer Service or a
similarly qualified person
only.
■
Use original parts supplied
by the manufacturer only.
The manufacturer
guarantees that these parts
satisfy the safety
requirements.
3
en Safety instructions
Risk of injury
Containers which contain
carbonated drinks may burst.
Fire hazard/Danger due
to refrigerants
The tubes of the refrigeration
circuit convey a small quantity
of an environmentally friendly
but flammable refrigerant
(R600a). It does not damage
the ozone layer and does not
contribute to the greenhouse
effect. If refrigerant escapes, it
may injure your eyes or ignite.
■
Do not damage the tubes.
If the tubes are damaged:
Keep naked flames and
ignition sources away from
the appliance.
■
Ventilate the room.
■
Switch off the appliance and
pull out the mains plug.
■
Please contact Customer
Service.
■
Fire hazard
Portable multiple outlets
or power supplies may
overheat, causing a fire.
Never leave portable multiple
outlets or portable power
supplies behind the appliance.
4
Avoiding placing children and
vulnerable people at risk
At risk are:
Children,
■
People who have limited
physical, mental or sensory
abilities,
■
People who have inadequate
knowledge concerning safe
operation of the appliance.
■
Measures:
■
Ensure that children and
vulnerable people have
understood the hazards.
■
Children or vulnerable
people must be supervised
by a responsible person
when using the appliance.
■
Only children from 8 years
and above may use the
appliance.
■
Supervise children while the
appliance is being cleaned
or maintained.
■
Never allow children to play
with the appliance.
Risk of suffocation
■
■
If the appliance features a
lock: keep the key out of the
reach of children.
Keep children away from the
packaging and its parts.
Intended use en
Damage
To prevent damage:
■
Do not stand or support
yourself on the base, runners
or doors.
■
Keep plastic parts and door
seals free of oil and grease.
■
Pull the mains plug – not the
power cord.
Weight
When installing and
transporting the appliance, note
that it may be very heavy.
~ "Installation location"
on page 6
8 Intended use
7 Environmental
protection
Envi r onment al pr ot ect i on
Packaging
All materials are environmentally safe
and recyclable:
■
Dispose of packaging in an
environmentally friendly manner.
■
Please ask your dealer or inquire at
your local authority about current
means of disposal.
Old appliances
Valuable raw materials can be
reclaimed by recycling old appliances.
: Warning
Children may become locked in the
appliance and suffocate!
■
To prevent children from climbing in,
leave shelves and containers in the
appliance.
■
Keep children away from the
redundant appliance.
■
Use this appliance
only for refrigerating food.
■
only in the home and in the home
environment.
■
only according to these operating
instructions.
Caution!
Refrigerant and harmful gases may
escape.
Do not damage the tubes of the
refrigerant circuit and insulation.
This appliance is intended for use up to
a maximum height of 2000 metres
above sea level.
1. Remove the mains plug.
2. Sever the power cord.
3. Have the appliance disposed of
I nt e n d ed u s e
professionally.
This appliance is labelled in
accordance with European
Directive 2012/19/EU
concerning used electrical and
electronic appliances (waste electrical
and electronic equipment - WEEE). The
guideline determines the framework for
the return and recycling of used
appliances as applicable throughout the
EU.
5
en Installation and connection
5 Installation and
connection
I n s t a l a t i on a nd c o n e c t i o n
Scope of supply
After unpacking all parts, check for any
damage in transit.
If you have any complaints, contact the
dealer from whom you purchased the
appliance or our customer service.
~ "Customer service" on page 19
The delivery consists of the following
parts:
■
Built-in appliance
■
Interior fittings (depending on model)
■
Installation material
■
User manual
■
Installation instructions
■
Customer service booklet
■
Warranty enclosure
■
Information on the energy
consumption and noises
Technical specifications
Refrigerant, cubic capacity and further
technical specifications can be found on
the rating plate.
~ "Getting to know your appliance"
on page 8
Installing the appliance
Installation location
The more refrigerant an appliance
contains, the larger the room must be in
which the appliance is situated. In
rooms which are too small leaking
refrigerant can form a flammable gas-air
mixture.
Per 8 g of refrigerant the room must be
at least 1 m³ in size. The amount of
refrigerant in your appliance is indicated
on the rating plate inside the appliance.
~ "Getting to know your appliance"
on page 8
6
The weight of the appliance may be up
to 76 kg depending on the model.
Permitted room temperature
The permitted room temperature
depends on the climatic class of the
appliance.
Information on the climatic class can be
found on the rating plate.
~ "Getting to know your appliance"
on page 8
Climatic cate- Permitted room temperature
gory
SN
+10 °C ... 32 °C
N
+16 °C ... 32 °C
ST
+16 °C ... 38 °C
T
+16 °C ... 43 °C
The appliance is fully functional within
the permitted room temperature.
If an appliance of climatic class SN is
operated at colder room temperatures,
the appliance will not be damaged up to
a room temperature of +5 °C.
Cavity dimensions
Cavity depth
A cavity depth of 56 cm
is recommended for the appliance.
If the cavity depth is smaller – at least
55 cm – the energy consumption
increases slightly.
Cavity width
An inside cavity width of at least 56 cm
is required for the appliance. If this is
not the case, problems may occur when
installing the appliance.
Installation and connection en
Tips for saving energy
If you follow the instructions below, your appliance will use less power.
Note: The arrangement of the features does not affect the energy consumption of
the appliance.
Installing the appliance
Keep the appliance out of direct sunlight.
Install the appliance as far away as possible from
heating elements, cooker and other heat sources:
3 cm to electric or gas cookers.
30 cm to an oil or solid-fuel cooker.
Note: If this is not possible, attach an insulating
plate between the appliance and heat source.
The appliance must cool less frequently at low
ambient temperatures and therefore consumes less
power.
Select an installation location at a room temperature
of approx. 20 °C.
Use a cavity depth of 56 cm.
The air on the rear panel of the appliance does not
warm up so intensely. The appliance consumes less
Caution!
power if the warm air can escape.
Risk of burns!
Individual parts of the appliance become hot during
operation. Touching these parts may result in burns.
Do not cover or block the ventilation openings.
Ventilate the room daily.
Using the appliance
Open the appliance door only briefly.
Transport purchased food in a cool bag and place
quickly in the appliance.
The air in the appliance does not warm up so
intensely. The appliance must cool less frequently
and therefore consumes less power.
Allow warm food and drinks to cool down before
placing in the appliance.
Thaw frozen food in the refrigerator compartment in
order to utilise the low temperature of the frozen
food.
Always leave a space between the food and the rear The air can circulate and the air humidity will
panel.
remain constant. The appliance must cool less frequently and therefore consumes less power.
Pack food airtight.
Do not cover or block the ventilation openings.
The air on the rear panel of the appliance does not
warm up so intensely. The appliance consumes less
power if the warm air can escape.
--------
7
en Getting to know your appliance
Before using your appliance
for the first time
: Warning
Risk of electric shock!
If the length of the mains cable is
inadequate, never use multiple
sockets or extension leads.Instead,
please contact Customer Service for
alternatives.
1. Remove information material,
adhesive tape and protective film.
2. Clean the appliance.
~ "Cleaning" on page 16
Electrical connection
Caution!
Do not connect the appliance to
electronic energy saver plugs.
Note: You can connect the appliance
to mains-controlled and sine-controlled
inverters.
Mains-controlled inverters are used for
photovoltaic systems which are
connected directly to the national grid.
Sine-controlled inverters must be used
for isolated applications. Isolated
applications, e.g. on ships or in
mountain lodges, which are not
connected directly to the national grid.
* Getting to know your
appliance
Fold out the last page with the
diagrams. The appliance and diagrams
may differ according to features.
Get i ng t o know your ap l i ance
1. After installing the appliance, wait at
least 1 hour before connecting it to
prevent damaging the compressor.
2. Connect the appliance via a
correctly installed socket.
The socket must comply with the
following data:
Socket with
220 V ... 240 V
Conductor
50 Hz
Fuse
10 A ... 16 A
Outside Europe: Check whether the
indicated current type of the
appliance corresponds with the
values of your power supply.
Appliance specifications are on the
rating plate.
~ "Getting to know your appliance"
on page 8
3. Connect the appliance to a socket
near the appliance.
The socket must also be freely
accessible following installation of
the appliance.
8
Appliance
~ Fig. !
* Not all models.
#
Refrigerator compartment
+
Cool-fresh compartment
(...X
`
h*
)"
)*
)2
):
)B*
)J
Controls
Lighting
Extendable shelf
Partition with humidity
controller
Vegetable container
Cool-fresh container
Rating plate
Butter and cheese
compartment
Tray for large bottles
Getting to know your appliance en
Controls
~ Fig. "
( Button #
Switches the appliance on or off.
0 E button
Switches Home Connect on or
off.
8 Button super refrigerator
compartment
Switches Super cooling on or off.
@ Button –/+ refrigerator
compartment
Sets the temperature of the
refrigerator compartment.
H Refrigerator compartment
temperature display
Indicates the set temperature
in °C.
P Button alarm
Switches the warning signal off.
X hyperFresh 0 °C
Lights up when the appliance is
in operation.
Extendable shelf
~ Fig. %
You can give yourself a better overview:
Pull out a shelf.
■
You can completely remove the shelf:
1. Press and hold down both buttons
under the shelf.
2. Pull out the shelf, lower and swing
out to the side.
Container
~ Fig. &
You can remove the container:
Lift the container at rear and remove.
■
You can insert the container:
■
Place the container on the telescopic
rails and push into the appliance.
Storage compartment
~ Fig. '
(not all models)
You can remove the storage
compartment:
■
Lift up storage compartment and
remove.
Shelf
~ Fig. #
Bottle holder
~ Fig. (
Interior fittings
You can vary the shelf:
■
Pull out and remove the shelf.
Vario shelf
~ Fig. $
When you open and close the door:
The bottle holder prevents the
bottles from overturning.
■
You can store tall items (e.g. cans or
bottles):
■
Take out the front part of the shelf
and push under the rear part.
9
en Operating the appliance
1 Operating the
appliance
Oper at i ng t he ap l i ance
Switching on the appliance
1. Press the # button.
The appliance begins to cool.
2. Set the required temperature.
Setting the temperature
Recommended temperature
Refrigerator compartment:
Refrigerator compartment
■
~ "Setting the temperature"
on page 10
Operating tips
■
■
After the appliance has been
switched on, it may take several
hours until the set temperature has
been reached. Do not put in any
food until the selected temperature
has been reached.
The sides of the housing are partly
heated slightly. This prevents
condensation in the area of the door
seal.
Switching off and
disconnecting the appliance
Switching off the appliance
■
Press the # button.
The appliance no longer cools.
Disconnecting the appliance
If you do not use the appliance for a
prolonged period:
1. Press the # button.
The appliance no longer cools.
2. Pull out the mains plug or switch off
the fuse.
3. Clean the appliance.
4. Leave the appliance open.
10
+4 °C
Keep pressing the button –/+ until
the display indicates the required
temperature.
Cool-fresh compartment
The temperature in the cool-fresh
compartment is kept at around 0 °C.
Note: If frost forms on the food items in
the cool-fresh compartment, set a
higher temperature. ~ "Faults – what
to do?" on page 18
Super cooling
Super cooling cools the refrigerator
compartment as cold as possible.
Switch on super cooling mode, e.g.:
■
before placing large quantities of
food in the compartment
■
for cooling drinks quickly
Note: When super cooling is switched
on, increased operating noises may
occur.
After 15 hours the appliance switches to
normal operation.
Switching Super cooling on/off:
Press the super button.
The button is lit when Super cooling
is switched on.
■
Alarm en
M Alarm
Door alarm
Al ar m
If the appliance door is open for a while,
the door alarm switches on.
■
Close the door or press
alarm button.
The warning signal is switched off.
o Home Connect
This appliance is Wi-Fi-capable and can
be remotely controlled using a mobile
device.
Home Con ect
Note: Wi-Fi is a registered trademark of
the Wi-Fi Alliance.
In the following cases, the appliance
functions like a refrigerator without a
network connection and can still be
manually operated via the controls:
■
The appliance is not connected to a
home network.
■
Home Connect service is not
available in the country in which the
appliance is set up. For an overview
of the countries in which Home
Connect is available, see
www.home-connect.com.
Note: Please observe the safety
information in this instruction manual.
Ensure that this is also observed if you
operate the appliance via the Home
Connect app and are not at home when
doing so.
~ "Safety instructions" on page 3
Follow the instructions in the Home
Connect app as well.
Setting up Home Connect
Notes
■
Observe the Home Connect
supplementary sheet, which is
available for download under
www.siemens-home.bsh-group.com
with the instructions. To do so, enter
the E-number of your appliance in
the search field.
■
After switching on the appliance,
wait at least two minutes until
internal device initialisation is
complete. Only then start setting up
Home Connect.
■
To implement settings with Home
Connect, the Home Connect app
must be installed on your mobile
device.
Observe the supplied Home
Connect documents for this.
Follow the steps specified by the
app to implement the settings.
■
The Home Connect menu will close
automatically when the appliance is
not operated for a lengthy period of
time. You can find information on
how to open the Home Connect
menu at the start of the appropriate
sections.
Automatic connection with the home
network (WLAN)
If a WLAN router with WPS function is
available, the refrigerator can be
automatically connected to the home
network.
1. Press E button.
Temperature display shows Cn.
2. Press super button until temperature
display shows AC.
3. Press + button.
The appliance is ready for automatic
connection.
The temperature display shows an
animation for 2 minutes.
The appliance is ready for automatic
connection for as long as the
animation is displayed.
11
en Home Connect
4. Within those 2 minutes activate the
WPS function on the home network
router (e.g. using
WPS/WLAN button. Observe the
information on this topic in the router
documentation).
If connection is successful, On
flashes in the temperature display.
The refrigerator is ready to connect
to the app.
Note: If the temperature display shows
OF, no connection could be
established.
1. Check whether the refrigerator is
located within the range of the home
network (WLAN).
2. Repeat the process or establish the
connection manually.
Manual connection with home
network (WLAN)
If the WLAN router does not have a
WPS function or if this is unknown, you
can connect the refrigerator to the home
network manually.
1. Press E button.
Temperature display shows Cn.
2. Press super button until temperature
display shows SA.
3. Press + button.
The appliance is ready for manual
connection.
The temperature display shows an
animation.
The appliance is ready for manual
connection for as long as the
animation is displayed.
4. The refrigerator has now set up its
own WLAN network with the network
name HomeConnect.
You can now access this network
with your mobile device.
5. Call up the WLAN settings in the
settings menu of the mobile device.
12
6. Connect the mobile device to the
WLAN network HomeConnect.
Password: HomeConnect
It can take up to 60 seconds to
establish the connection.
7. After successfully connecting, open
the Home Connect app on the
mobile device.
The app will search for the
refrigerator.
8. As soon as the refrigerator has been
found, enter the network
name (SSID) and the
password (Key) of your own home
network (WLAN) in the
corresponding fields.
9. Confirm with Transmit to domestic
appliances button.
– If connection is successful, On
flashes in the temperature
display.
You can now connect the
refrigerator to the app.
– If the temperature display shows
OF, no connection could be
established.
Check whether the refrigerator is
located within the range of the
home network (WLAN).
Repeat the process.
Connecting the refrigerator to the
Home Connect app
1. Press E button.
The temperature display shows Cn.
2. Press super button until the
temperature display shows PA.
3. Press + button to connect the
appliance to the app.
The temperature display shows an
animation.
As soon as the refrigerator and the
app are connected, the temperature
display shows On.
Home Connect en
4. Open the app and wait until the
refrigerator is displayed.
Use Add to confirm the connection
between the app and the
refrigerator.
If the refrigerator is not automatically
displayed, click on Add appliance in
the app and follow the instructions.
As soon as your refrigerator is
displayed, add it with +.
5. Follow the instructions in the app
until the process is complete.
The temperature display shows PA.
The refrigerator has been connected
to the app.
If the connection fails, check whether
the mobile device is connected to
the home network (WLAN).
Then try to establish the connection
again.
If Er appears in the temperature
display, reset the Home
Connect settings.
Note: On resetting, all Home
Connect settings are reset.
Resetting Home Connect settings
If there is a problem when trying to
establish a connection or if you would
like to register the appliance in a
different home network (WLAN), the
Home Connect settings can be reset:
1. Press E button.
Temperature display shows Cn.
2. Press super button until temperature
display shows rE.
3. Press + button.
Temperature display shows an
animation for 15 seconds.
The temperature display then
shows On.
The Home Connect settings have
been reset.
Installing updates for the
Home Connect software
The refrigerator checks at regular
intervals whether updates are available
for the Home Connect software.
If an update is available, the
temperature display shows UP.
Press any button to return the display to
the set temperature.
Install the update:
1. Press E button.
Temperature display shows Cn.
2. Press super button until temperature
display shows UP.
3. Press + button.
The temperature display shows an
animation.
The update is installed.
All buttons are locked during
installation.
– If installation was successful,
temperature display shows On.
– If installation was not successful,
temperature display shows Er.
Start the update again at a later
time.
Inform Customer Service if
installation has still not been
successfully completed after
several attempts.
Information on data protection
The first time your Home Connect
appliance is registered on the WLAN
network connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
■
Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
installed Wi-Fi communication
module).
13
en Refrigerator compartment
■
■
■
Security certificate of the Wi-Fi
communication module (to ensure a
secure IT connection).
The current software and hardware
version of your domestic appliance.
Status of any previous resetting to
factory settings.
This initial registration prepares the
Home Connect functions for use and is
only required when you want to use
these Home Connect functions for the
first time.
Note: Be aware that the Home Connect
functions can only be utilised with the
Home Connect app. Information on data
protection can be called up in the Home
Connect app.
Declaration of conformity
BSH Hausgeräte GmbH hereby
declares that the appliance with
Home Connect functionality meets the
essential requirements and the other
relevant provisions of the Directive
2014/53/EU.
A detailed RED Declaration of
Conformity can be found online
at www.siemens-home.bsh-group.com
among the additional documents on the
product page for your appliance.
2.4 GHz band: 100 mW max.
5 GHz band: 100 mW max.
BE
BG CZ
ES
FR
y HU
SK
DK DE
HR IT
EE
IE
EL
CY
LV
LT
LU
PL
PT
RO SI
AT
FI
UK NO CH TR
5 GHz WLAN: for indoor use only
14
compartment
The refrigerator compartment is
suitable for storing dairy products, eggs,
cooked meals, pastries, preserves once
opened and hard cheese.
The temperature can be set from
+3 °C ... +8 °C.
The refrigerator compartment can also
be used to store highly perishable foods
in the short to medium term. The lower
the selected temperature, the slower the
enzymatic and chemical processes and
deterioration by microorganisms. A
temperature of +4 °C or lower ensures
optimum freshness and safety of the
stored foods.
Ref r i ger at or compar t ment
Note when storing food
■
■
■
■
MT NL
SE
U Refrigerator
Store fresh, undamaged food.
The quality and freshness will then
be retained for longer.
In the case of ready products and
bottled goods do not exceed the
minimum sell-by date or use-by-date
indicated by the manufacturer.
To retain aroma, colour
and freshness, pack or cover food
well before placing it in the
appliance.
This avoids transference of flavours
and discolouration of the plastic
parts.
Leave warm food and drinks to cool
down before placing them in the
refrigerator compartment.
Cool-fresh compartment en
Note the chill zones in the
refrigerator compartment
The air circulation in the refrigerator
compartment creates different chill
zones.
Coldest zone
The coldest zone is on the partition and
in the storage area for large bottles.
Warmest zone
The warmest zone is at the very top of
the door.
Notes
■
■
Store e.g. hard cheese and butter in
the warmest zone. Cheese can then
continue to release its aroma and
the butter will still be easy to spread.
Store perishable food such as fish,
sausages and meat in the cool-fresh
compartment. ~ "Cool-fresh
compartment" on page 15
T Cool-fresh
compartment
The temperature in the cool-fresh
compartment is kept at around 0 °C.
The low temperature and the optimum
moisture provide ideal storage
conditions for fresh food.
With cool-fresh storage, you can keep
fresh foodstuffs fresh for up to three
times longer than in the refrigerator
compartment – for even longer
freshness, nutrient retention and better
flavour.
Co l - f r esh compar t ment
Vegetable container
~ Fig. )
The vegetable container is the best
storage location for fresh fruit and
vegetables.You can adjust the humidity
in the vegetable container via the
humidity controller of the division plate
and a special seal.
The humidity in the vegetable container
can be set according to the type and
amount of products to be stored:
■
Mainly fruit as well as for a large
load – set lower air humidity
■
Mainly vegetables as well as for a
mixed or small load – set higher air
humidity
Notes
■
Fruit sensitive to cold (e.g.
pineapple, banana, papaya and
citrus fruit) and vegetables sensitive
to cold (e.g. aubergines, cucumbers,
courgettes, peppers, tomatoes and
potatoes) should be stored outside
the appliance at temperatures of
approx. +8 °C ... +12 °C for
optimum preservation of quality and
flavour.
■
Condensation may form in the
vegetable container depending on
the food and quantity stored.
Remove condensation with a dry
cloth and adjust the humidity in the
vegetable container with the humidity
controller.
Cool-fresh container
~ Fig. !/)2
The storage climate in the cool-fresh
container offers ideal conditions for the
storage of fish, meat and sausage.
15
en Defrosting
Storage times at 0 °C
The storage times are dependent on the
original quality.
Fresh fish, seafood:
up to 3 days
Poultry, meat (boiled/fried):
up to 5 days
Beef, pork, lamb, sausage
products (cold meat):
up to 7 days
Smoked fish, broccoli:
up to 14 days
Salad greens, fennel, apricots, plums:
up to 21 days
Soft cheese, yoghurt, quark,
buttermilk, cauliflower:
up to 30 days
= Defrosting
Proceed as follows:
1. Switch off the appliance.
2. Pull out the mains plug or switch off
the fuse.
3. Take out the food and store in a cool
location.
If present: place ice pack
on the food.
4. If present: wait until the layer of frost
has thawed.
5. Clean the appliance with a soft cloth,
lukewarm water and a little
pH-neutral washing-up liquid.
Caution!
The rinsing water must not run into
the light or through the drainage
hole into the evaporation area.
6. Wipe door seal with clear water and
dry thoroughly with a cloth.
7. Reconnect and switch on appliance
and put in food.
Refrigerator compartment
Cleaning the equipment
The defrost process is performed
automatically.
To clean, take the variable parts out of
the appliance.
~ "Interior fittings" on page 9
Def r ost i ng
D Cleaning
Caution!
Avoid damaging the appliance and the
fittings.
■
Do not use abrasive, chloride or
acidic cleaning agents or solvents.
■
Do not use scouring or abrasive
sponges.
The metallic surfaces may corrode.
■
Never clean the shelves
or containers in the dishwasher.
The parts may become deformed.
Cl eani ng
16
Partition and vegetable container
cover
Taking out the partition
~ Fig. *
■
Remove glass plate, press levers on
the underside on both sides, pull
partition forwards, lift and swivel out
to the side.
Taking out the vegetable container
cover
■
Lift cover, pull forwards and swivel
out to the side.
Odours en
Inserting vegetable container cover
and partition
~ Fig. ,
9 Lighting
Your appliance features a
maintenance-free LED light.
Only customer service or authorised
technicians may repair the light.
Li ght i ng
1. Insert vegetable container cover.
2. Insert partition.
3. Insert glass plate.
Telescopic rails
~ Fig. +
Removing telescopic rails
1. Pull out telescopic rail.
2. Push lock in the direction of the
arrow.
3. Detach telescopic rail from the rear
pin.
4. Push telescopic rail together, push
backwards above the rear pin and
disengage.
Installing telescopic rails
1. Place the extended telescopic rail on
the front pin.
2. Pull the telescopic rail forwards
slightly until it engages.
3. Insert telescopic rail on the rear pin.
4. Push lock backwards.
l Odours
Odour s
If you experience unpleasant odours:
1. Switch off the appliance with
the On/Off button #.
2. Take all food out of the appliance.
3. Clean the inside.~ "Cleaning"
> Noises
Noi se
Normal noises
Droning: A motor is running, e.g.
refrigerating unit, fan.
Bubbling, buzzing or gurgling:
Refrigerant is flowing through the tubes.
Clicking: Motor, switches or solenoid
valves are switching on and off.
Cracking: Automatic thawing
successful.
Preventing noises
Appliance is not level: Align appliance
using a spirit level. If required, place a
little packing underneath.
Containers, shelves or storage
compartments wobble or stick: Check
the removable fittings and re-insert if
required.
Bottles or receptacles are touching
each other: Move bottles or receptacles
away from each other.
on page 16
4. Clean all packages.
5. Seal strong smelling food in order
to avoid odours from forming.
6. Switch the appliance on again.
7. Store food in the appliance.
8. Check whether the formation of
odours is still occurring after
24 hours.
17
en Faults – what to do?
3 Faults – what to do?
Before you call customer service, use this table to check whether you can rectify the
fault yourself.
Faul t s – what t o do?
Temperature differs greatly from the set value.
Switch off appliance for 5 minutes.
~ "Switching off and disconnecting the appliance"
on page 10
If the temperature is too warm, check temperature
again after a couple of hours.
If the temperature is too cold, check temperature
again on the following day.
Displays do not illuminate.
The mains plug has not been inserted properly.
Connect the mains plug.
The fuse has tripped.
Check the fuses.
The power has failed.
Check whether the power is on.
Display shows E....
Electronics have detected a fault.
Call Customer Service.
~ "Customer service" on page 19
Appliance is not cooling, display and lighting are lit.
Showroom mode switched on.
Start the appliance self-test.
~ "Appliance self-test" on page 19
When the programme has ended, the appliance
switches over to normal operation.
It is too warm or too cold in the cool-fresh compartment.
The standard setting has been set too high or low
(e.g. frost in the cool-fresh compartment).
--------
18
You can set the temperature in the cool-fresh compartment to be 3 settings warmer or colder. If the
temperature in the refrigerator compartment is set
to setting 0, the cool-fresh compartment has a temperature of around 0 °C.
1. Press and hold the refrigerator
compartment super button until the display temperature refrigerator compartment flashes.
2. Press –/+ button to change the setting.
Setting –3 corresponds to the coldest setting.
Setting +3 corresponds to the warmest setting.
The selected setting is saved after one minute.
Customer service en
4 Customer service
If you are unable to rectify the fault,
please contact our customer service.
We will always find an appropriate
solution in order to avoid unnecessary
visits by engineers.
The contact information for your nearest
customer service can be found here or
on the enclosed customer service list.
When calling, please state the product
number (E-Nr.) and the production
number (FD) which can be found on the
rating plate.
~ "Getting to know your appliance"
on page 8
Trust the expertise of the
manufacturer. You can therefore be
sure that the repair is carried out by
trained service technicians who carry
original spare parts for your domestic
appliances.
■
Cust omer ser vi ce
■
If 2 audible signals sound after the
end of the self-test and the set
temperature is displayed, your
appliance is OK.
If, at the end of the self-test, 5
audible signals sound and the super
freezer compartment button flashes
for 10 seconds, inform customer
service.
When the programme has ended,
the appliance switches over to normal
operation.
Repair order and advice on
faults
Contact information for all countries can
be found on the enclosed customer
service list.
GB 0344 892 8999
Calls charged at local or
mobile rate.
IE
0.03 € per minute at
peak. Off peak 0.0088 €
per minute.
01450 2655
Appliance self-test
Your appliance features a self-test
programme which displays the fault
which your customer service can rectify.
1. Switch off the appliance and wait 5
minutes.
2. Switch on the appliance.
3. Within the first 10 seconds after
switching on, press and hold the
super refrigerator compartment
button for 3–5 seconds until an
audible signal sounds.
The self-test programme starts.
While the self-test is running, a long
audible signal sounds in the
meantime.
US 866 447 4363
toll-free
--------
Guarantee
Detailed information on the warranty
period and warranty conditions in your
country are available from your
customer service, your dealer and on
our website.
19
6
6
6
6
6
6
6
(
X
)B
#
`
h
)"
)J
)*
+
)2
):
!
ƒ&
;
"
3
+#
#
$
%
&
'
(
1
4
2
3
)
*
+
,
0DQXIDFWXUHGE\%6++DXVJHUlWH*PE+XQGHU7UDGHPDUN/LFHQVHRI6LHPHQV$*
*8001125006*
8001125006 (9810)
en
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising