Siemens | CI30RP01 | Instruction manual | Siemens iQ700 Built-in Fridge Instruction manual

Siemens iQ700 Built-in Fridge Instruction manual
en
Instruction for Use
CI30..
CI24..
CI24RP01AU
Refrigerator
en
en Table of Contents
enInstruoticnforUse
Safety and warning information ......................... 3
Information concerning disposal ....................... 4
Scope of delivery .................................................. 4
Installing the appliance ....................................... 4
Ambient temperature and ventilation ............... 5
Connecting the appliance ................................... 5
Getting to know your appliance ........................ 6
Switching the appliance on ................................ 8
Set the language .................................................. 8
Setting the temperature unit ............................... 8
Setting the temperature ...................................... 8
Special functions .................................................. 8
Alarm function .................................................... 10
Usable capacity ................................................. 10
Refrigerator compartment ............................... 10
Super cooling ..................................................... 10
“Cool-fresh” container ...................................... 11
Interior fittings .................................................... 11
Switching off and disconnecting
the appliance ..................................................... 13
Defrosting ........................................................... 13
Cleaning the appliance .................................... 13
Odours ................................................................ 13
Exchange the odour filter ................................ 13
Light (LED) .......................................................... 14
Tips for saving energy ...................................... 14
Operating noises ............................................... 14
Eliminating minor faults yourself .................... 15
Customer service .............................................. 16
2
en
■
Safety and warning information
Before you switch ON the appliance
Please read the operating and installation instructions
carefully! They contain important information on how to
install, use and maintain the appliance.
The manufacturer is not liable if you fail to comply with
the instructions and warnings. Retain all documents for
subsequent use or for the next owner.
Technical safety
This appliance contains a small quantity of
environmentally-friendly but flammable R600a
refrigerant. Ensure that the tubing of the refrigerant
circuit is not damaged during transportation
and installation. Leaking refrigerant may cause eye
injuries or ignite.
If damage has occurred
■
■
■
Keep naked flames and/or ignition sources away
from the appliance,
thoroughly ventilate the room for several minutes,
switch off the appliance and pull out the mains plug,
inform customer service.
The more refrigerant an appliance contains, the larger
the room must be in which the appliance is situated.
Leaking refrigerant can form a flammable gas-air
mixture in rooms which are too small.
The room must be at least 1 m³ per 8 g of refrigerant.
The amount of refrigerant in your appliance is indicated
on the rating plate inside the appliance.
If the power cord of this appliance is damaged, it must
be replaced by the manufacturer, customer service or a
similarly qualified person. Improper installations
and repairs may put the user at considerable risk.
Repairs may be performed by the manufacturer,
customer service or a similarly qualified person only.
Only original parts supplied by the manufacturer may
be used. The manufacturer guarantees that only these
parts satisfy the safety requirements.
A extension cable may be purchased from customer
service only.
■
■
■
Do not use pointed or sharp-edged implements to
remove frost or layers of ice. You could damage
the refrigerant tubing. Leaking refrigerant may ignite
or cause eye injuries.
Do not store products which contain flammable
propellants (e.g. spray cans) or explosive
substances in the appliance. Risk of explosion!
Do not stand or support yourself on the base,
drawers or doors, etc.
■
Before defrosting and cleaning the appliance, pull
out the mains plug or switch off the fuse. Do not pull
out the mains plug by tugging the cable.
■
Bottles which contain a high percentage of alcohol
must be sealed and stored in an upright position.
■
Keep plastic parts and the door seal free of oil
and grease. Otherwise, parts and door seal will
become porous.
■
Never cover or block the ventilation openings for
the appliance.
People (childern incl.) who have limited physical,
sensory or mental abilities or inadequate knowledge
must not use this appliance unless they are
supervised or given meticulous instructions.
■
Children in the household
■
■
■
Keep children away from packaging and its parts.
Danger of suffocation from folding cartons and
plastic film!
Do not allow children to play with the appliance!
If the appliance features a lock:
keep the key out of the reach of children!
General regulations
The appliance is suitable for refrigerating food.
This appliance is intended for use in the home
and the home environment.
The appliance is suppressed according to EU Directive
2004/108/EC.
The refrigeration circuit has been checked for leaks.
This product complies with the relevant safety
regulations for electrical appliances (EN 60335-2-24).
Important information when using
the appliance
■
■
Never use electrical appliances inside the appliance
(e.g. heater, electric ice maker, etc.). Risk of
explosion!
Never use a steam cleaner to defrost or clean
the appliance! The steam may penetrate electrical
parts and cause a short-circuit. Risk of electric
shock!
3
en
Information concerning
disposal
* Disposal of packaging
The packaging protects your appliance from damage
during transit. All utilised materials are environmentally
safe and recyclable. Please help us by disposing of the
packaging in an environmentally friendly manner.
Please ask your dealer or inquire at your local authority
about current means of disposal.
* Disposal of your old appliance
Old appliances are not worthless rubbish! Valuable raw
materials can be reclaimed by recycling old appliances.
This appliance is identified
according to the European
guideline 2002/96/EC on waste
electrical and electronic
equipment – WEEE. The directive
specifies the framework for an
EU-wide valid return and re-use
of old appliances.
ã=Warning
Redundant appliances
1. Pull out the mains plug.
2. Cut off the power cord and discard with the mains
plug.
3. Do not take out the trays and receptacles: children
are therefore prevented from climbing in!
4. Do not allow children to play with the appliance once
it has spent its useful life. Danger of suffocation!
Refrigerators contain refrigerant and gases
in the insulation. Refrigerant and gases must be
disposed of professionally. Ensure that tubing
of the refrigerant circuit is not damaged prior to proper
disposal.
Scope of delivery
After unpacking all parts, check for any damage in
transit.
If you have any complaints, please contact the dealer
from whom you purchased the appliance or our
customer service.
The delivery consists of the following parts:
■ Built-in appliance
■
■
■
Interior fittings (depending on model)
Operating instructions
Installation manual
■
Customer service booklet
Warranty enclosure
Information on the energy consumption and noises
■
Bag containing installation materials
■
■
Installing the appliance
Have a technician install and connect the appliance
according to the enclosed installation instructions.
Transporting
The appliances are heavy and must be secured during
transportation and installation.
Because of the weight / dimensions of the appliance
and to minimise the risk of injuries and damage to
the appliance at least two persons are necessary to
set-up the appliance securely.
Installation location
A dry, well ventilated room is suitable as an installation
location. The installation location should not be
exposed to direct sunlight and not placed near a heat
source, e.g. a cooker, radiator, etc. If installation next
to a heat source is unavoidable, use a suitable
insulating plate or observe the following minimum
distances from the heat source:
■
3 cm to electric or gas cookers.
30 cm to an oil or coal-fired cooker.
The floor of the installation location must not give way;
if required, reinforce floor.
■
4
en
Ambient temperature
and ventilation
Ambient temperature
The climate class can be found on the rating plate.
The climate class indicates within which ambient
temperatures the appliance can be operated.
Climate class
SN
N
ST
T
Permitted ambient temperature
+10 °C to 32 °C
+16 °C to 32 °C
+16 °C to 38 °C
+16 °C to 43 °C
Note
The appliance is fully functional within the room
temperature limits of the indicated climatic class. If
an appliance of climatic class SN is operated at colder
room temperatures, the appliance will not be damaged
up to a temperature of +5 °C.
Ventilation
Conduction of the heated air must not be obstructed.
Otherwise, the refrigeration unit must work harder. This
increases power consumption. Therefore: Never cover
or block the ventilation opening!
Connecting the appliance
Have a technician install and connect the appliance
according to the enclosed installation instructions.
Do not remove the transportation protection devices
from the shelves and storage compartments until
the appliance has been installed.
In addition to the statutory national regulations, observe
the connection conditions of the local power supply
companies.
After installing the appliance, wait at least 1 hour until
the appliance starts up. During transportation the oil
in the compressor may have flowed into
the refrigeration system.
Before switching on the appliance for the first time,
clean the interior of the appliance (see chapter
“Cleaning the appliance”).
Electrical connection
The socket must be near the appliance and also freely
accessible following installation of the appliance.
The appliance complies with the protection class I.
Connect the appliance to 220-240 V/50 Hz alternating
current via a correctly installed socket with protective
conductor. The socket must be fused with a 10 to
16 A fuse.
For appliances operated in non-European countries,
the identification plate should be checked whether
the electric supply and the current model stated match
the values of the mains supply. The rating plate is
situated in the bottom left-hand side of the appliance.
ã=Warning
Never connect the appliance to electronic energy saver
plugs.
Our appliances can be used with mains and sinecontrolled inverters. Mains-controlled inverters are used
for photovoltaic systems which are connected directly
to the national grid. Sine-controlled inverters must be
used for isolated applications (e.g. on ships or in
mountain lodges) which are not connected directly to
the national grid.
5
en
Getting to know your appliance
These operating instructions refer to several models.
The diagrams may differ.
1
2
3
4
5
6
7
8
9
10
11
6
Light switch
Controls
Glass shelf in the refrigerator compartment
Snack-Box
Fruit and vegetable container
Selection buttons “cool-fresh” container
“Cool-fresh” container
Ventilation
Butter and cheese compartment
Door shelf
Storage compartments for large bottles
en
Controls
A
B
C
D
E
On/Off button
Serves to switch the whole appliance on and off.
Alarm button
Used to switch off the warning signal, (see
chapter “Alarm function”).
“Super” button (refrigerator compartment)
Switches super cooling on and off.
Display panel
The temperatures in the refrigerator
compartment are shown in the display panel.
Activated special functions are shown via
“symbol”.
The menus and setting options which are
available are represented on the display panel
in the setup mode, see chapter “Special
functions”.
Selection buttons
The temperature setting is activated using
the selection buttons (see chapter Setting
the temperature).
For selecting a menu in the setup mode (see
chapter Special functions).
F
G
H
Setting buttons
The temperature can be changed using
the setting buttons (see chapter “Setting
the temperature”).
More settings can be selected in the setup
mode, (see chapter “Special functions”).
“setup” button
This button starts and ends the setup mode. If
the setup mode is ended using the setup button,
the changes which have been made are stored.
Button Vacation
Is used to switch vacation mode on and off, (see
chapter Special functions, section Vacation
mode).
Note
A sound can be heard every time a button is actuated if
this function is activated in the sound menu during
the setup mode.
Symbols in the display field
Super cooling is activated (see chapter
“Super cooling”).
Holiday mode is activated, see chapter
Special functions.
A warning message is displayed, see
chapter Alarm function.
7
en
Switching the appliance on
Special functions
Switch on the appliance with the On/Off button.
The appliance begins to cool. Light is switched on
when the door is open.
The following special functions can be selected
or displayed:
Operating tips
In Setup mode you can make your personal settings.
■
■
When the appliance has been switched on, it may
take several hours until the set temperature has
been reached.
The fully automatic No Frost system ensures that
the refrigerator compartment remains free of ice.
Defrosting is not required.
Setup mode
Switching on
Press setup button.
The first menu (temperature unit) is displayed in
the fascia.
Set the language
The display languages can be changed according
to the table in the chapter “Special functions”, “Setup
mode”.
In order to change the display language:
1. Press setup button.
2. Press the ¾ or ¿ setting button, until the set
language is displayed.
3. Press the @ or A setting button, until the desired
language is displayed.
4. Press the setup button, in order to store the settings.
The set temperature is displayed again in the fascia.
Making settings
1. Switch on setup mode.
2. Press the selection button ¾ or ¿.
The next menu is displayed and its current setting
(mostly ON or OFF).
Setting the temperature unit
The temperature can be displayed in degrees Celsius
(°C) or degrees Fahrenheit (°F).
1. Press setup button.
The first menu (temperature unit) is displayed.
2. Press the @ or A setting button in order to switch
between degrees Fahrenheit (°F) and degrees
Celsius (°C).
3. Press the setup button, in order to store the settings.
The set temperature is displayed again in the fascia.
3. Press the setting button @ or A.
The setting is saved, if the next menu is selected
using ¾ or ¿.
Setting the temperature
Switching off
Refrigerator compartment
(can be selected from +2 °C to +8 °C)
We recommend a setting of +4 °C.
Perishable food should not be stored above +4 °C.
1. Activate the setup mode with the selection button ¿.
The symbol REFRIGERATOR is displayed.
2. Set the temperature with the @ (warmer) or A
(cooler) setting buttons.
8
Press setup button.
All of the changed settings are stored.
Note
If no button is selected within 20 seconds, the setup
mode ends automatically. All of the changed settings
are stored. The set temperature is displayed again in
the fascia.
en
Menus in the setup mode
The following settings can be made.
Menu
Possible setting
Temperature unit
°C (degrees Celsius)
°F (degrees Fahrenheit)
Sabbath mode
When Sabbath mode is switched on, the following
settings are switched off:
■
■
■
■
Language
Deutsch
English
French
Danish
Finnish
Greek
Dutch
Italian
Polish
Portuguese
Norwegian
Russian
Swedish
Spanish
Turkish
Czech
Sound
On
Off
Energy saving mode
(eco function)
On
Off
■
■
Super cooling (if it is switched on)
Acoustic signal
Interior light
Messages in the display panel
The background illumination of the display panel is
reduced.
Buttons are locked.
Switching on
1. Press and hold down the “super” button refrigerator
compartment.
2. Press Vacation button.
3. Press “super” button and hold down for 3 seconds
longer.
The symbol VACATION flashes on the display panel
and SABBATH is displayed.
Switching off
Press Vacation button.
The previous settings and temperature values are once
again activated.
Energy saving mode
If the energy saving function (eco function) is activated,
the appliance switches to energy saving operation. This
energy saving function is preset at the factory in order
to reduce energy consumption. The background
illumination of the fascia is likewise reduced.
Switching on
Vacation mode
If leaving the appliance for a long period of time, you
can switch the appliance over to the energy-saving
vacation mode.
When Vacation mode is switched on, the following
settings are made:
■
■
■
The appliance works in energy saving mode.
The illumination is switched off.
The “super cooling” function is ended (if activated).
Switching on
Press Vacation button.
VACATION is displayed in the display panel.
Switching off
Press Vacation button.
The previous settings and temperature values are once
again activated.
1. Press setup button.
2. Press the selection button ¿, until ECO MODE
and the current setting (OFF) is displayed.
3. Press the setting button @, in order to reset
the setting.
4. Press the setup button, in order to store the setting.
ECO is displayed in the fascia.
Switching off
1. Press setup button.
2. Press the selection button ¿, until ECO MODE
and the current setting (ON) is displayed.
3. Press the setting button A, in order to reset
the setting.
4. Press the setup button, in order to store the setting.
9
en
Alarm function
Super cooling
Switching off the warning signal
Super cooling cools the refrigerator compartment as
cold as possible for approx. 6 hours. Then
the appliance automatically switches to the temperature
set prior to super cooling mode.
Press the “alarm” button to switch off the warning
signal.
Switch on super cooling mode, e.g.:
Door alarm
The door alarm switches on if an appliance door is left
open for longer than three minutes. Close the door
to switch off the warning signal.
■
Before placing large quantities of food in
the refrigerator compartment
■
For fast cooling drinks
Switching on
Usable capacity
Press super button refrigerator compartment.
The symbol SUPER¾ is shown in the display panel.
Information on the usable capacity can be found inside
your appliance on the rating plate (see diagram at
chapter “Customer service”).
Refrigerator compartment
Switching off
The refrigerator compartment is the ideal storage
location for ready meals, cakes and pastries, preserved
food, condensed milk, hard cheese, fruit
and vegetables sensitive to cold as well as tropical fruit.
When purchasing food, please note:
The “purchase freshness” is important for the shelf-life
of your food.
In principle, the fresher the produce when placed in
the “cool-fresh” compartment, the longer it stays fresh.
Therefore, when buying food, always pay attention to
the degree of freshness.
Observe the best-before date specified by the
manufacturer for ready products and bottled products.
Arranging food in the appliance
■
■
■
■
Wrap or cover food before placing in the appliance.
This will retain the aroma, colour and freshness of
the food. In addition, flavours will not be transferred
between foods and the plastic parts will not become
discoloured.
Allow warm food and drinks to cool down before
placing in the appliance.
Do not block air outlet openings with food in
the refrigerator compartment, otherwise the air
circulation will be impaired.
Food which is stored directly in front of the air outlet
openings may be frozen by the cold air flowing out.
Avoid contact of oil and fat with the plastic parts
and door seal.
10
Press super button refrigerator compartment.
en
“Cool-fresh” container
The temperature in the “cool-fresh” container is about
0 °C. The “cool-fresh” drawer is covered by a special
filter which sets the ideal humid climate.
When purchasing food, please note:
The “purchase freshness” is important for the shelf-life
of your food.
In principle, the fresher the produce when placed in
the “cool-fresh” compartment, the longer it stays fresh.
The low temperature and the optimum moisture provide
ideal storage conditions for fresh food.
Food can be kept fresh up to three times longer than
in the normal cooling zone – for even longer freshness,
nutrient retention and flavour.
Therefore, when buying food, always pay attention to
the degree of freshness.
Observe the best-before date specified by the
manufacturer for ready products and bottled products.
Selection buttons for “cool-fresh”
container
Interior fittings
Press the appropriate button corresponding to the food
stored:
Taking out the shelves
■
■
FISH
For the storage of fish and seafood.
MEAT/POULTRY
You can reposition the shelves inside the appliance
and the door shelves as required.
Lift the shelves and remove.
Shelves inside the compartment
For the storage of meat products, poultry, sausage
and prepared meals.
■
PRODUCE
For the storage of fruit, vegetables, mushrooms and
herbs.
The selection is displayed by illumination of the
corresponding button.
Door shelves
Foods suitable for “cool-fresh” container:
In principle all foods which are fresh and are to remain
fresh for even longer, such as: fish, seafood, meat
and sausage, dairy products, and ready meals.
Foods not suitable for the “cool-fresh”
drawer:
Fruit and vegetables sensitive to cold (e.g.: tropical fruit
such as pineapples, bananas, papaya, citrus fruits,
melons as well as tomatoes, aubergines, zucchini,
capsicums, cucumbers, potatoes).
The ideal storage location for these foods is
the refrigerator compartment.
11
en
Containers in the refrigerator
compartment
Removing the humidity filter in the “coolfresh” container
1. Lift container slightly and take out.
Take out the “cool-fresh” container first. Then, pull out
the humidity filter.
2. Lift container at front slightly and insert into the
pullouts.
3. Lower container and push back.
Vegetable container with humidity
controller
To create the optimum storage climate for vegetables,
salad and fruit, the air humidity in vegetable container
can be regulated according to the quantity stored.
Smaller quantities of food –
slide the regulator to the left.
Larger quantities of food –
slide the regulator to the right.
12
Lift off the filter cover and take out the filter.
en
Switching off and
disconnecting the appliance
Switching the appliance off
Press the On/Off button.
Refrigeration unit and light switch off.
Disconnecting the appliance
If you do not use the appliance for a prolonged period:
1. Switch off the appliance.
2. Pull out mains plug or switch off fuse.
3. Clean the appliance.
4. Leave the appliance door open.
Odours
If you experience unpleasant odours:
1. Switch the appliance off.
2. Take all food out of the appliance.
3. Clean the interior. See chapter “Cleaning
the appliance”.
4. Clean all packages.
5. Seal strong smelling food in order to avoid odours
from forming.
6. Switch the appliance on again.
7. Store food in the appliance.
8. Check whether the formation of odours is still
occuring after 24 hours.
9. Exchange the odour filter. See chapter “Exchange
the odour filter”.
Defrosting
Defrosting is actuated automatically.
Exchange the odour filter
Spare filters are available from your dealer.
Cleaning the appliance
1. Opening the filter holder.
ã=Warning
Never clean the appliance with a steam cleaner!
ã=Caution
■
■
■
Do not use abrasive, chloride or acidic cleaning
agents or solvents.
Do not use scouring or abrasive sponges.
The metallic surfaces could corrode.
Never clean shelves and containers
in the dishwasher. The parts may become deformed!
2. Remove the used odour filter and replace with a new
odour filter.
Proceed as follows:
1. Before cleaning: Switch the appliance off.
2. Pull out the mains plug or switch off the fuse.
3. Clean the appliance with a soft cloth, lukewarm
water and a little pH neutral washing-up liquid.
The rinsing water must not run into the light.
4. Wipe the door seal with clear water only and then
wipe dry thoroughly.
5. After cleaning reconnect and switch the appliance
back on.
Interior fittings
3. Opening the filter holder.
All variable parts of the appliance can be taken out
for cleaning (see chapter “Interior fittings”).
13
en
Light (LED)
Your appliance features a maintenance-free LED light.
These lights may be repaired by customer service
or authorised technicians only.
Tips for saving energy
■
■
■
■
■
Operating noises
Quite normal noises
Droning
Motors are running (e.g. refrigerating units, fan).
Bubbling, humming or gurgling noises
Refrigerant is flowing through the tubing.
Install the appliance in a dry, well ventilated room!
The appliance should not be installed in direct
sunlight or near a heat source (e.g. radiator, cooker).
Clicking
If required, use an insulating plate.
Do not block the ventilation openings in
the appliance.
Allow warm food and drinks to cool down before
placing in the appliance!
When thawing frozen products, place them
in the refrigerator. Use the coldness of the frozen
food to cool food.
Open the appliance as briefly as possible.
Preventing noises
Motor, switches or solenoid valves are switching on/off.
The appliance is not level
Please align the appliance with a spirit level. Use
the height-adjustable feet or place packing underneath
them.
The appliance is not free-standing
Please move the appliance away from adjacent units
or appliances.
Containers or storage areas wobble or stick
Please check the removable parts and re-insert them
correctly if required.
Bottles or receptacles are touching each other
Move the bottles or receptacles slightly away
from each other.
14
en
Eliminating minor faults yourself
Before you call customer service:
Please check whether you can eliminate the fault yourself based on the following information.
Customer service will charge you for advice – even if the appliance is still under guarantee!
Appliance
Fault
Possible cause
Remedial action
Appliance has no refrigeration
capacity.
The light does not work.
Appliance has been switched off.
Press the On/Off button.
Power failure.
Check whether the power is on.
The fuse has been switched off.
Check the fuse.
The display does not illuminate.
The mains plug has not been inserted Check whether the mains plug is secure.
properly.
The refrigeration unit is
switching on more frequently
and for longer.
Appliance opened frequently.
Do not open the appliance unnecessarily.
The ventilation openings have been
covered.
Remove obstacles.
Large quantities of fresh food are
placed in the freezer.
Activate super cooling.
The LED lamp is defective.
Call customer service.
Light switch is jammed.
Check whether it can be moved.
Display indicates “E..”.
Electronics have detected a fault.
Call customer service.
Display indicates
“LOWPOWER”.
The mains voltage falls below
the permitted limiting value.
When the mains voltage reaches
the stipulated value again, the warning
message goes out. If the warning message
lasts for longer, inform the energy supply
company.
The light (LED) does not work.
15
en
Customer service
Your local customer service can be found
in the telephone directory or in the customer-service
index. Please provide customer service with
the appliance product number (E-Nr.) and production
number (FD-Nr.).
These specifications can be found on the rating plate.
To prevent unnecessary call-outs, please assist
customer service by quoting the product
and production numbers. This will save you additional
costs.
Repair order and advice on faults
Contact information for all countries can be found
on the enclosed customer service list.
GB 0844 8928999
IE 01450 2655
US 866 447 4363
16
Calls from a
BT landline
will be
charged at up
to 3 pence
per minute. A
call set-up fee
of up to
6 pence may
apply.
toll-free
Siemens-Electrogeräte GmbH
Carl-Wery-Straße 34
81739 München
Germany
*9000729423*
9000729423
en 9201
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising