Siemens | CI30RP02 | Instructions for use | Siemens iQ700 Built-in fridge Instructions for Use

Siemens iQ700 Built-in fridge Instructions for Use
Refrigerator
CI24RP02
CI30RP02
en User manual
en
enTable of contents
en User manual
( Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . 3
o Home Connect. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
About these instructions. . . . . . . . . . . . . .
Risk of explosion . . . . . . . . . . . . . . . . . . .
Risk of electric shock . . . . . . . . . . . . . . . .
Risk of injury . . . . . . . . . . . . . . . . . . . . . .
Fire hazard/Danger due to refrigerants . .
Fire hazard . . . . . . . . . . . . . . . . . . . . . . . .
Avoiding placing children and vulnerable
people at risk . . . . . . . . . . . . . . . . . . . . . .
Damage to property . . . . . . . . . . . . . . . . .
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting up Home Connect . . . . . . . . . . . . . .
Connecting the refrigerator to the
Home Connect app . . . . . . . . . . . . . . . . . . .
Installing updates for the Home Connect
software . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Customer Service access . . . . . . . . . . . . . . .
Restoring settings. . . . . . . . . . . . . . . . . . . . .
Switch on or off the connection to the home
WLAN network (Wi-Fi). . . . . . . . . . . . . . . . . .
Information on data protection . . . . . . . . . . .
Declaration of Conformity . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.3
.3
.3
.3
.3
.3
. . . . . . . . . .3
. . . . . . . . . .4
. . . . . . . . . .4
8 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
7 Green living . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Old appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5 Installation and connection . . . . . . . . . . . . . . . . . 6
Scope of supply . . . . . . . . . . . . . . . . . . . . . .
Technical specifications . . . . . . . . . . . . . . . .
Installing the appliance. . . . . . . . . . . . . . . . .
Built-in cut-out. . . . . . . . . . . . . . . . . . . . . . . .
Side-by-side installation . . . . . . . . . . . . . . . .
Tips for saving energy . . . . . . . . . . . . . . . . .
Before using the appliance for the first time.
Electrical connection . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.6
.6
.6
.6
.6
.7
.7
.7
* Getting to know your appliance . . . . . . . . . . . . . 8
. . . . . . .13
. . . . . . .13
. . . . . . .14
. . . . . . .14
. . . . . . .14
. . . . . . .14
. . . . . . .14
. . . . . . .14
U Refrigerator compartment. . . . . . . . . . . . . . . . . 15
Note when storing food . . . . . . . . . . . . . . . .
Note the chill zones in the refrigerator
compartment . . . . . . . . . . . . . . . . . . . . . . . .
Vegetable container . . . . . . . . . . . . . . . . . . .
Vegetable container with humidity controller
Cool-fresh container . . . . . . . . . . . . . . . . . . .
Storage times at 0 °C. . . . . . . . . . . . . . . . . .
. . . . . . .15
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.15
.15
.15
.15
.15
D Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Cleaning the display . . . . . . . . . . . . . . . . . . . . . . . . . .16
Cleaning the appliance interior . . . . . . . . . . . . . . . . . .16
Cleaning the equipment . . . . . . . . . . . . . . . . . . . . . . .16
l Odours . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Changing the odour filter . . . . . . . . . . . . . . . . . . . . . .16
Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
> Noises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1 Operating the appliance . . . . . . . . . . . . . . . . . . 11
9 Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3 What to do in the event of a fault . . . . . . . . . . . 18
Switching on the appliance . . . . . . . . . . . . . . .
Switching off and disconnecting the appliance
Setting the temperature . . . . . . . . . . . . . . . . . .
Super cooling . . . . . . . . . . . . . . . . . . . . . . . . . .
Eco mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sabbath mode . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 11
. 11
. 11
. 11
. 12
. 12
M Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Door alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2
Normal noises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Preventing noises . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
4 Customer Service. . . . . . . . . . . . . . . . . . . . . . . . 19
Appliance self-test . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Obtaining advice and ordering repairs if a
fault occurs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Safety instructions
( Safety instructions
This appliance complies with the relevant
safety regulations for electrical appliances and
is fitted with noise suppression.
The refrigeration circuit has been checked for
leaks.
Saf et y i nst r uct i ons
About these instructions
■
■
■
Read and follow the instructions for
installation and use.They contain important
information on how to install, use and
maintain the appliance.
The manufacturer is not liable if you
disregard the notifications and warnings in
the operating and installation instructions.
Retain all documents for subsequent use or
for the next owner.
Risk of explosion
■
■
■
■
Never use electric appliances inside the
appliance (e.g. heaters or electric ice
makers).
Do not store products which contain
flammable propellant (e.g. spray cans) or
explosive substances in the appliance.
Keep high-percentage alcohol tightly sealed
and store in an upright position.
Do not use additional means to accelerate
the defrosting process other than those
recommended by the manufacturer.
Risk of electric shock
Improper installations and repairs may put the
user at considerable risk.
■
When installing the appliance, ensure that
the mains cable is not trapped or damaged.
■
If the mains cable is damaged: immediately
disconnect the appliance from the electricity
supply.
■
Do not use multi-outlet power strips,
extension leads or adapters.
■
Have the appliance repaired by the
manufacturer, Customer Service or a
similarly qualified person only.
■
Use original parts supplied by the
manufacturer only.
The manufacturer guarantees that these
parts satisfy the safety requirements.
en
Risk of injury
Containers which contain carbonated drinks
may burst.
Fire hazard/Danger due to refrigerants
The tubes of the refrigeration circuit
convey a small quantity of an environmentally
friendly but flammable refrigerant (R600a). It
does not damage the ozone layer and does
not contribute to the greenhouse effect. If
refrigerant escapes, it may injure your eyes or
ignite.
■
Do not damage the tubes.
If the tubes are damaged:
■
Keep naked flames and ignition sources
away from the appliance.
■
Ventilate the room.
■
Switch off the appliance and pull out the
mains plug.
■
Please contact Customer Service.
Fire hazard
Portable multi-outlet power strips or
power supplies may overheat, causing a fire.
Never leave portable multi-outlet power strips
or portable power supplies behind the
appliance.
Avoiding placing children and vulnerable
people at risk
At risk here are:
■
Children,
■
People with limited physical, mental or
sensory abilities,
■
People who have inadequate knowledge
concerning safe operation of the appliance.
Measures:
■
Ensure that children and vulnerable people
have understood the hazards.
■
A person responsible for safety must
supervise or instruct children and
vulnerable people who are using the
appliance.
■
Only children aged 8 years and above may
use the appliance.
■
Supervise children who are cleaning and
maintaining the appliance.
■
Never allow children to play with the
appliance.
3
en
Safety instructions
Risk of suffocation
■
■
If the appliance features a lock: keep the
key out of the reach of children.
Keep children away from the packaging
and its parts.
Damage to property
To prevent damage to property:
Do not stand or support yourself on the
base, runners or doors.
■
Keep plastic parts and door seals free of oil
and grease.
■
Pull on the mains plug – not the power
cord.
■
4
Weight
The appliance is very heavy. The appliance
should always be transported and set up by at
least 2 persons.
~ "Installation and connection" on page 6
Intended use
8Intended use
Use this appliance
only for refrigerating food.
■
Only in the home and in the home environment.
■
Only according to this user manual.
I nt ended us e
■
This appliance is intended for use up to a maximum
height of 2000 metres above sea level.
en
7Green living
Gr e n l i vi ng
Packaging
All materials are environmentally safe and recyclable:
■
Dispose of packaging in an environmentally friendly
manner.
■
Please ask your dealer or inquire at your local
authority about current means of disposal.
Old appliances
Valuable raw materials can be reclaimed by recycling
old appliances.
: Warning – Children may become locked in the
appliance and suffocate!
■
Leave shelves and containers in the appliance to
prevent children from climbing in.
■
Keep children away from the redundant appliance.
Caution!
Refrigerant and harmful gases may escape.
Do not damage the tubes of the refrigerant circuit or the
insulation.
1. Pull out the mains plug.
2. Cut through the power cable.
3. Have the appliance disposed of properly.
This appliance is labelled in accordance with
European Directive 2012/19/EU on waste
electrical and electronic equipment (WEEE).
This Directive provides an EU-wide framework for
returning and recycling old appliances.
5
en
Installation and connection
5 Installation and
connection
I n s t a l a t i o n a nd c o n e c t i o n
Scope of supply
After unpacking all parts, check for any damage in
transit.
If you have any complaints, contact the dealer from
whom you purchased the appliance or our Customer
Service.
~ "Customer Service" on page 19
The delivery consists of the following parts:
■
Built-in appliance
■
Interior fittings (depending on model)
■
Installation material
■
User manual
■
Installation instructions
■
Customer service booklet
■
Warranty enclosure
■
Information on the energy consumption and noises
Technical specifications
Refrigerant, cubic capacity and further technical
specifications can be found on the rating plate.
~ "Getting to know your appliance" on page 8
Installing the appliance
Installation location
The more refrigerant an appliance contains, the larger
the room must be in which the appliance is situated. In
rooms which are too small leaking refrigerant can form
a flammable gas-air mixture.
Per 8 g of refrigerant the room must be at least 1 m³ in
size. The amount of refrigerant in your appliance is
indicated on the rating plate inside the appliance.
~ "Getting to know your appliance" on page 8
The weight of the appliance may be up to 460 kg
depending on the model.
6
Permitted room temperature
The permitted room temperature depends on the
climate class of the appliance.
Information on the climate class can be found on the
rating plate.
~ "Getting to know your appliance" on page 8
Climate class
SN
N
ST
T
Permitted room temperature
+10°C ... 32°C
+16°C ... 32°C
+16°C ... 38°C
+16°C ... 43°C
The appliance is fully functional within the permitted
room temperature.
If an appliance with climate class SN is operated at
colder room temperatures, the appliance will not be
damaged up to a room temperature of +5°C.
Built-in cut-out
The cut-out must fulfil these criteria:
■
Anti-tilt bracket fitted
■
Cut-out depth min. 610 mm, for flush installation
635 mm
■
Rectangular
■
Sturdy – the side panels and the top must be min.
16 mm thick and securely attached to the floor or
wall
■
Depth of shortened side panels: min. 100 mm
Side-by-side installation
Observe the specifications in the installation instructions
for a side-by-side installation.
If a partition wall is required between the appliances, it
must be at least 16 mm wide.
Installation and connection
en
Tips for saving energy
If you follow the instructions below, your appliance will use less power.
Note:
The arrangement of the features does not affect the
energy consumption of the appliance.
Installing the appliance
Keep the appliance out of direct sunlight.
Install the appliance as far away as possible from heating elements,
cookers and other heat sources:
At least 1¼" (3 cm) from electric or gas cookers.
At least 11¾" (30 cm) from oil or solid-fuel cookers.
Select an installation location with a room temperature of approx.
20°C.
Do not cover or block the ventilation openings.
Ventilate the room daily.
Using the appliance
Open the appliance door only briefly.
Transport purchased food in a cool bag and place in the appliance
quickly.
Allow warm food and beverages to cool down before placing in the
appliance.
Defrost frozen food in the refrigerator compartment to utilise the low
temperature of the frozen food.
Always leave a space between the food and the back wall.
Pack food airtight.
Do not cover or block the ventilation openings.
Vacuum the ventilation openings once a year.
--------
Before using the appliance for the first time
1. Remove information material, adhesive tape and
protective film.
2. Clean the appliance.
~ "Cleaning" on page 16
Electrical connection
Caution!
Do not connect the appliance to electronic energy saver
plugs.
Note:
You can connect the appliance to mains-controlled and
sine-controlled inverters.
Mains-controlled inverters are used for photovoltaic
systems which are directly connected to the national
grid. Sine-controlled inverters must be used for isolated
applications.Isolated applications, e.g. on ships or in
mountain lodges, which are not directly connected to
the national grid.
The appliance needs to cool less frequently at low ambient temperatures and therefore consumes less power.
If the warm air can escape, the appliance needs to cool less frequently and therefore consumes less power.
The air in the appliance will not warm up as much. The appliance will
need to cool less frequently, and therefore consume less power.
The air can then circulate and the humidity will remain constant.The
appliance will need to cool less frequently, and therefore consume
less power.
The appliance consumes less power if warm air can escape.
2. Connect the appliance to a correctly installed
socket.
The socket must comply with the following data:
Socket with
220 V ... 240 V
Protective
50 Hz
conductor
Fuse
10 A ... 16 A
Outside Europe: Check whether the indicated
current type of the appliance corresponds with the
values of your power supply. The appliance
specifications are specified on the rating plate.
~ "Getting to know your appliance" on page 8
3. Connect the appliance to a socket near the
appliance.
The socket must also be freely accessible after
installation of the appliance.
: Warning
Risk of electric shock!
If the length of the mains cable is insufficient, do
NOT use multi-outlet power strips or extension
leads.Instead, please contact Customer Service for
alternative solutions.
1. After installing the appliance, wait at least 1 hour
before connecting it to avoid damaging the
compressor.
7
en
Getting to know your appliance
* Getting to know your appliance
Get i ng t o know your ap l i ance
(
8
@
H
P
X
`
h
Appliance
(...8
@
H
P
X
`
h
)"
8
Controls
Main switch on/off
Rating plate
Vegetable container
Vegetable container with humidity
controller
Cool-fresh container
Ventilation opening
Shelf for large bottles
)"
Getting to know your appliance
Controls
(
ƒ&
0
8
(
0
8
ƒ&
Refrigerator compartment temperature
display
Indicates the set temperature in °C/°F.
) button
Opens main menu.
Cool-fresh compartment temperature display
Indicates the set temperature in °C/°F.
Main menu
Press the ) button to open the main menu.
The main menu contains the operating modes, an
overview of the information texts for the appliance's
functions, and the Ò Settings menu.
Mode selection
To switch on a mode, tap on it. When an operating
mode is switched on, the corresponding symbol is
shown on the control panel.
A window containing the information text for the
selected operating mode appears.
Ë Eco mode
Switches the energy saving mode on or off.
~ "Eco mode" on page 12
Ý
Opens the menu for setting the Sabbath
mode.
Settings menu
Tap Ò to open the settings.
Display brightness Adjust the control panel
and dimming
brightness and switch the
effect
dimming effect on or off. When
the dimming effect is switched
on, the light slowly becomes
brighter when the appliance is
opened, and then slowly darker
when it is closed.
Volume
Set the volume of the touch key
tone and the audible signal.
Home Connect
Connect your refrigerator to your
mobile device.
~ "Home Connect" on page 13
Sabbath mode
Opens the menu for setting the
Sabbath mode and displaying
the Sabbath mode in the main
menu.
All non-essential functions are
switched off so you can also use
the appliance on the Sabbath.
~ "Sabbath mode" on page 12
Self-test and reset Self-test
Start fault analysis on your
appliance.
Factory settings
Reset the appliance back to its
factory settings as received on
delivery.
Demo mode
After switching on the appliance,
this menu item is displayed for
3 minutes. To switch Demo
mode on or off later, switch the
appliance off and on again. The
mode is displayed again for
3 minutes.
Note: Do not store any food in
Demo mode, as the appliance
remains at room temperature.
Note: This function is only visible once it has
been switched on in the Settings menu.
All non-essential functions are switched off so
you can also use the appliance on the
Sabbath.
~ "Sabbath mode" on page 12
Overview of the information texts l
The information texts are provided for the most relevant
functions.In the overview l, you will find all the
information texts for the functions. When you switch on
a function, the appliance will display the information text
for this function. If required, you can switch off the
information text for individual functions.The overview l
will still show all the information texts.
In order to switch on all the information texts in the
functions again, reset the appliance to its factory
settings.
en
ˆ Regional
settings
The cooling function of the
appliance is switched off.You can
use all other functions.
ˆ Language
Change the display language.
Temperature unit
Select the temperature unit °C/
°F.
9
en
Getting to know your appliance
Features
Container
(not all models)
You can remove the container:
Press container to the rear,
Lift the container at the rear and remove.
Storage compartment
You can remove and adjust the height of the storage
compartment:
1. Lift up storage compartment and remove.
2. When re-inserting, insert hooks on back of storage
compartment at same height to make it level.
Note:
Insert the storage compartment carefully to avoid
scratching the appliance.
Shelf
You can remove and adjust the shelf:
1. Lift shelf and remove.
2. When re-inserting, position hooks on back of shelf at
same height to make it level.
Note:
Insert shelf carefully to avoid scratching appliance.
10
You can insert the container:
Pull out telescopic rails all the way
Place the container on the telescopic rails and push into the
appliance until it engages.
Operating the appliance
1Operating the appliance
Oper at i ng t he ap l i ance
Switching on the appliance
1. Press the main On/Off switch.
The appliance starts refrigerating, and the light
switches on when the door is open.
2. Set the required temperature.
~ "Setting the temperature" on page 11
Operating tips
■
■
■
■
After the appliance has been switched on, it may
take several hours until the set temperatures have
been reached. Do not put in any food until the
selected temperature has been reached.
The fully automatic NoFrost system ensures that
the freezer compartment remains free of ice.
Defrosting is not required.
The sides of the housing are heated slightly in
certain areas. This prevents condensation
in the area of the door seal.
If the freezer compartment door cannot be
immediately re-opened after it has been closed, wait
until the resulting low pressure has equalised.
Switching off and disconnecting the
appliance
Switching off the appliance
■
Press the main On/Off switch.
The appliance will stop refrigerating.
Disconnecting the appliance
Caution!
Deterioration in water quality
The water supply must be turned off 3 hours before
disconnecting. This prevents mould forming due to
unused water.
If you are not going to use the appliance for a long
period:
1. Turn off the water supply to the appliance and wait
3 hours.
2. Remove the food.
3. Press the main On/Off switch.
4. Pull out the mains plug or switch off the fuse.
The appliance will stop refrigerating.
5. Empty the ice cube container and clean the
appliance.
~ "Cleaning" on page 16
6. Leave the appliance open.
en
Setting the temperature
Recommended temperature
Refrigerator compartment:
Chill compartment
+4 °C
+1 °C
Setting the refrigerator and cold storage compartment
temperature
1. Select the required compartment by tapping the
temperature display.
2. Move the displayed temperature to the required
value.
3. Return to the main screen with the b button.
Super cooling
Super cooling cools the refrigerator compartment to
make it as cold as possible.
Switch on super cooling mode, e.g.:
■
Before placing large quantities of food in the
compartment
■
For cooling beverages quickly
Note: When super cooling is switched on, increased
operating noises may occur.
After approx. 6 hours, the appliance switches to normal
operation.
Switching on super cooling
1. Select the refrigerator compartment by tapping the
temperature display.
2. Tap ÊSuper cooling.
When the function is switched on, an information text
appears to explain the function.
Tap Switch on.
Note: If you have disabled the information text, you
can alternatively find it in the overview of information
texts.
The Super cooling switched on message appears.
3. Tap b to return to the main screen.
Switch off super cooling
In the refrigerator compartment temperature display, tap
Ê.
The Super cooling switched off message appears.
11
en
Alarm
Eco mode
Eco mode switches the appliance to energy-saving
operation.
MAlarm
Door alarm
Al ar m
The appliance automatically sets the following
temperatures:
■
Refrigerator compartment: 6 °C
■
Cool-fresh compartment: 1 °C
Sabbath mode
All non-essential functions are switched off so you can
also use the appliance on the Sabbath.
■
■
■
You can select a time between 1 and 96 hours
After the selected time expires, the appliance will
switch to normal operation.
To end Sabbath mode before expiry of the set time,
tap ×.
The appliance switches off the following:
■
Audible signals
■
Interior lighting
■
Messages on the control panel
■
Background illumination of control panel is reduced
12
If the appliance door is open for a longer time, the door
alarm (continuous audible signal) switches on.
■
Close the appliance door.
The audible warning signal is switched off.
Home Connect
en
o Home Connect
3. Open the app on your mobile device.
4. Log in or register with the app if access is not yet
This appliance is Wi-Fi-capable and can be remotely
controlled using a mobile device.
5. Check the router of your Wi-Fi home network to see
Home Con ect
Note: Wi-Fi is a registered trademark of the Wi-Fi
Alliance.
In the following cases, the appliance functions like a
refrigerator without a network connection and can still
be operated manually using the controls:
■
The appliance is not connected to a home network.
■
The Home Connect service is not available in the
country in which the appliance is set up. For an
overview of the countries in which Home Connect is
available, see www.home-connect.com.
Note: Please observe the safety instructions in this user
manual. Ensure that these are also observed if you
operate the appliance via the Home Connect app and
are not at home when doing so.
~ "Safety instructions" on page 3
Please also follow the instructions in the Home Connect
app.
Setting up Home Connect
Notes
■
Wait at least 2 minutes after switching on the
appliance before setting up Home Connect. Only
then is internal appliance initialisation complete.
■
Observe the Home Connect supplementary sheet,
which is either enclosed with the appliance or
available for download with the instructions
under www.siemens-home.bsh-group.com. Enter the
E-number of your appliance in the search field.
You can connect your appliance to the Wi-Fi in 3 basic
steps.
1. Install the app.
2. Connect your refrigerator to the Wi-Fi home network.
3. Connect your refrigerator to the Home Connect app.
The first time you open the menu, you will be
automatically guided through initial setup. Follow the
instructions on the control panel. For further information,
please also see the following chapters.
The following submenus can be found in the Home
Connect menu:
■
Connect to network/Wi-Fi
■
App connection
■
Restoring settings
Setting up the connection to the home WLAN network
(Wi-Fi)
The first time you open the menu, you will be
automatically guided through initial setup. Follow the
instructions on the control panel.
available.
if a WPS function is available for automatic
connection.
6. If this function is available, start automatic network
connection in the Connect to network submenu and
follow the instructions on the control panel.
7. If this function is not available, if you're not sure
whether the function is available, or if automatic
network connection fails, start manual network
connection in the Connect to network submenu.
The refrigerator temporarily generates its own
network for connecting the mobile device.
8. Start manual network connection in the app on your
mobile device.
As soon as the refrigerator is connected to the mobile
device, a connection will be established between the
refrigerator and your Wi-Fi home network.
Note: If the connection cannot be established, check
whether there is sufficient signal strength.
Checking signal strength
The signal strength is displayed on the control panel.
The signal strength should be at least 1 bar in addition
to the dot. If the signal strength is too weak, the
connection may be interrupted temporarily.
Improving signal strength
■
Place the router closer to the refrigerator.
■
Check that screening walls do not interfere with the
connection.
■
Install a repeater to make the signal stronger.
Connecting the refrigerator to the
Home Connect app
Use this menu to connect your refrigerator to mobile
devices.
1. Install the Home Connect app on your mobile device
and log in or register.
2. Open the Home Connect menu on your refrigerator.
~ "Setting up Home Connect" on page 13
3. Open the App connection menu option.
4. Confirm the message to display the refrigerator in
the app.
5. Open the app and wait until the refrigerator is
displayed.
Use Add to confirm the connection between the app
and the refrigerator.
If the refrigerator is not displayed automatically, click
on Add appliance in the app and follow the
instructions. As soon as your refrigerator is
displayed, add it with +.
6. Follow the instructions in the app until the process is
complete.
1. Install the Home Connect app on your mobile
device.
2. Open the Home Connect menu on your refrigerator.
13
en
Home Connect
Installing updates for the Home
Connect software
The refrigerator checks at regular intervals whether
updates are available for the Home Connect software.
A notification window appears on the control panel
when an update is available.
To install the update, tap Install.
Install the update later:
1. Open the Settings menu.
2. Tap Software update.
Note: This menu is only visible if an update is
available.
A notification window appears.
3. To install the update, tap Install.
Customer Service access
If you contact Customer Service, they can access your
appliance and view its status after you have given your
consent. You need to have your appliance connected to
your home network in order to do this.
Further information about Customer Service access and
its availability in your country is available under
www.home-connect.com in the Help & Support area.
1. Contact Customer Service.
~ "Customer Service" on page 19
2. Confirm the start of Customer Service access in the
app.
During Customer Service access, the
symbol Ö appears on the control panel.
3. As soon as Customer Service has obtained the
necessary data, they will end their access.
Note: You can interrupt remote diagnostics early by
switching off Customer Service access in the Home
Connect app.
Restoring settings
If there is a problem when trying to establish a
connection or if you would like to register the appliance
in a different Wi-Fi home network (Wi-Fi), the Home
Connect settings can be reset.
1. Open the Home Connect menu on your refrigerator.
2. Tap the Reset settings menu option.
3. Confirm the message to delete the network settings.
To reconnect the appliance to the home WLAN network
(Wi-Fi), perform initial setup again.
~ "Setting up the connection to the home WLAN
network (Wi-Fi)" on page 13
Switch on or off the connection to the home
WLAN network (Wi-Fi)
1. Open the Home Connect menu on your refrigerator.
Note: The first time you open the menu, you will be
automatically guided through initial setup. Follow the
instructions on the control panel.
2. Select Wi-Fi.
3. To start the switching off process, press Off.
14
4. As soon as the connection to the Wi-Fi home
network has been switched off, the Wi-Fi switched
off message will appear. Press Finish to confirm the
message.
Note: While the home WLAN network (Wi-Fi) connection
is switched off, you will no longer be able to operate the
appliance with your mobile device.
Information on data protection
The first time your Home Connect appliance is
registered on a WLAN home network connected to the
Internet (Wi-Fi), your appliance will transmit the following
types of data to the Home Connect server (initial
registration):
■
■
■
■
Unique appliance identification (consisting of
appliance codes as well as the MAC address of the
installed Wi-Fi communication module).
Security certificate of the Wi-Fi communication
module (to ensure a secure data connection).
The current software and hardware version of your
home appliance.
Status of any previous resetting to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use these Home Connect functions for the first time.
Note: Please note that the Home Connect functions can
only be utilised with the Home Connect app. Information
on data protection can be called up in the
Home Connect app.
Declaration of Conformity
BSH Hausgeräte GmbH hereby declares that the
appliance with Home Connect functionality meets the
essential requirements and the other relevant provisions
of the Directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found
online at www.siemens-home.bsh-group.com among
the additional documents on the product page for your
appliance.
2.4 GHz band: 100 mW max.
5 GHz band: 100 mW max.
y
BE
BG
CZ
DK
DE
ES
FR
HR
IT
CY
HU
MT
NL
AT
PL
SK
FI
SE
UK
NO
5 GHz WLAN: for indoor use only
EE
LV
PT
CH
IE
LT
RO
TR
EL
LU
SI
Refrigerator compartment
URefrigerator compartment
The refrigerator compartment is suitable for storing
meat, sausages, fish, dairy products, eggs, ready meals
and pastries.
The temperature can be set anywhere between
+2°C and +8°C.
The refrigerator compartment can also be used to store
highly perishable foods in the short to medium term.
The lower the temperature selected, the slower the
enzymatic and chemical processes and deterioration
caused by micro-organisms. A temperature of +4°C or
lower ensures optimum freshness and safety of the
stored foods.
Ref r i ger at or compar t ment
Note when storing food
Note: Avoid contact between food and the rear panel.
Otherwise, the air circulation will be impaired and food
or packaging may freeze to the rear panel.
■
■
■
■
Store food when fresh and undamaged.
The quality and freshness will then be retained for
longer.
In the case of convenience products and bottled
goods, do not exceed the minimum sell-by date or
use-by date specified by the manufacturer.
To retain aroma, colour and freshness, pack
or cover food well before placing it in the appliance.
This will prevent flavours being transferred between
foods and the plastic parts from becoming
discoloured.
Leave warm food and beverages to cool down
before placing them in the refrigerator compartment.
Note the chill zones in the refrigerator
compartment
The air circulation in the refrigerator compartment
creates different chill zones.
Coldest zone
The coldest zone is in the interior at the rear wall and in
the chill compartment.
Note: Store perishable food (e.g. fish, sausages and
meat) in the coldest zone.
Warmest zone
The warmest zone is at the very top of the door.
Note: Store products such as hard cheese and butter in
the warmest zone. Cheese can continue to release its
flavour, and the butter will still be easy to spread.
Vegetable container
The vegetable container is the best storage location for
fresh fruit and vegetables.High air humidity keeps leafy
vegetables fresh for longer. Fruit and vegetables should
be stored at a slightly lower air humidity.
en
Notes
■
Fruit sensitive to cold (e.g. pineapple, banana,
papaya and citrus fruit) and vegetables sensitive to
cold (e.g. aubergines, cucumbers, zucchini,
peppers, tomatoes and potatoes) should be stored
outside the appliance at temperatures of approx.
+8 °C ... +12 °C for optimum preservation of quality
and flavour.
■
Condensation may form in the vegetable container
depending on the food and quantity stored.
Remove condensation with a dry cloth.
Vegetable container with humidity controller
The vegetable container is the best storage location for
fresh fruit and vegetables.You can adjust the humidity in
the vegetable container via the humidity controller and a
special seal. This allows fresh fruit and vegetables to be
stored up to twice as long as with conventional storage.
The humidity in the vegetable container can be set
according to the type and amount of products to be
stored:
■
Mainly fruit or large loads – set lower humidity with
controller position fruit
■
Mainly vegetables or mixed or small loads – set
higher humidity with controller position vegetables
Notes
■
Fruit sensitive to cold (e.g. pineapples, bananas,
papayas and citrus fruit) and vegetables sensitive to
cold (e.g. aubergines, cucumbers, courgettes,
peppers, tomatoes and potatoes) should be stored
outside the appliance at temperatures of approx.
+8°C ... +12°C for optimum preservation of quality
and flavour.
■
Condensation may form in the vegetable container
depending on the food and quantity stored.
Remove condensation with a dry cloth and adjust
the humidity in the vegetable container with the
humidity controller.
Cool-fresh container
The storage climate in the cool-fresh container offers
ideal conditions for the storage of fish, meat and
sausage.
Storage times at 0 °C
The storage times are dependent on the original quality.
Fresh fish, seafood:
Poultry, meat (boiled/fried):
Beef, pork, lamb, sausage products (cold
meat):
Smoked fish, broccoli:
Salad greens, fennel, apricots, plums:
Soft cheese, yoghurt, quark, buttermilk, cauliflower:
up to 3 days
up to 5 days
up to 7 days
up to 14 days
up to 21 days
up to 30 days
15
en
Cleaning
DCleaning
Caution!
Avoid damaging the appliance and the fittings.
■
Do not use abrasive, chloride or acidic cleaning
agents or solvents.
■
Do not use scouring or abrasive sponges.
Metallic surfaces may corrode.
■
Never clean shelves or containers in the dishwasher.
These parts may become deformed.
Cl eani ng
Cleaning the display
The change in temperature and humidity can cause the
controls to steam up.
Switch the clean lock on before cleaning.
Use a clean microfibre cloth for cleaning.
Cleaning the appliance interior
Proceed as follows:
1. Pull out the mains plug or switch off the fuse.
2. Take out the food and store in a cool location.
Place ice pack (if available) on the food.
3. Clean the appliance with a soft cloth, lukewarm
water and a little pH-neutral washing-up liquid.
Caution!
The rinsing water must not run into the light
or through the drainage hole into the evaporation
area.
4. Wipe the door seal with clean water and dry
thoroughly with a cloth.
5. Reconnect appliance, switch on and put in food.
Cleaning the equipment
lOdours
Odour s
If you experience unpleasant odours:
1. Pull out the mains plug or switch off the fuse.
2. Take all food out of the appliance.
3. Clean the inside.
~ "Cleaning" on page 16
4. Clean all packages.
5. Seal strong-smelling food to prevent odours from
forming.
6. Switch the appliance on again.
7. Place food in the appliance.
8. Check whether odours are still occurring after
24 hours.
9. Change the odour filter.
~ "Changing the odour filter" on page 16
Changing the odour filter
Replacement filters are available from your Customer
Service team.
1. Open the filter holder with a slotted screwdriver.
2. Remove the used odour filter and replace with a new
odour filter.
To clean, take the variable parts out of the appliance.
~ "Features" on page 10
3. Close the filter holder.
16
Noises
>Noises
Noi ses
Normal noises
Droning: A motor is running, e.g. refrigerating unit, fan.
Bubbling, buzzing or gurgling: Refrigerant is flowing
through the tubes.
Clicking: The motor, switches or solenoid valves are
switching on and off.
Cracking: Automatic defrosting is running.
en
9Lighting
Your appliance features a maintenance-free LED light.
Only Customer Service or authorised technicians may
repair the light.
Li ght i ng
Preventing noises
Appliance is not level: Align appliance using a spirit
level. If required, place a little packing underneath.
Containers, shelves or storage compartments wobble
or stick: Check the removable fittings and re-insert if
required.
17
en
What to do in the event of a fault
3 What to do in the event of a fault
What t o do i n t he event of a f aul t
Before you call Customer Service, use this table to check whether you can rectify the fault yourself.
Appliance
Temperature differs greatly from the set value.
Switch off appliance for 5 minutes.
~ "Switching off and disconnecting the appliance" on page 11
If the temperature is too warm, check temperature again after a couple of hours.
If the temperature is too cold, check temperature again on the following day.
Displays do not illuminate.
The mains plug has not been inserted properly.
The fuse has been tripped.
The power has failed.
Connect mains plug.
Check the fuses.
Check whether the power is on.
The refrigeration unit is switching on more frequently and for longer.
The appliance has been opened frequently.
Do not open the appliance unnecessarily.
The ventilation openings are covered up.
Remove obstructions.
Large quantities of fresh food have been put in.
Switch on super cooling promptly in advance.
Appliance is not cooling, display and lighting are lit.
Demo mode is switched on.
--------
18
Switch Demo mode off.
Customer Service
4Customer Service
Obtaining advice and ordering repairs if a
fault occurs
If you are unable to rectify the fault, please contact our
Customer Service. We will always finds a suitable
solution to avoid unnecessary visits by technicians.
The contact information for your nearest Customer
Service office can be found here or on the enclosed
Customer Service list.
When calling, please state the product number (E-Nr.)
and the production number (FD), which can be found
on the rating plate.
~ "Getting to know your appliance" on page 8
You can trust in the manufacturer's expertise. You
can therefore be sure that the repair is carried out by
trained service technicians who carry original spare
parts for your home appliances.
Contact information for all countries can be found on
the enclosed Customer Service list.
Cust omer Ser vi ce
GB
IE
0344 892 8999
01450 2655
US
866 447 4363
en
Calls charged at local or mobile rate.
€0.03 per minute at peak. Off peak:
€0.0088 per minute.
Toll-free
--------
Appliance self-test
Your appliance features a self-test programme; this
displays the fault which your Customer Service team
can rectify.
1. Press the Ò button to open the settings.
2. Tap on the Self-test and reset menu.
3. Tap the Self-test menu option.
The information text for the self-test will appear.
4. Tap Start.
The self-test programme will start.
5. If faults are present, they will be displayed.
In this case, follow the instructions on the display.
6. The appliance restarts.
When the self-test has ended, the appliance switches
over to normal operation.
19
0DQXIDFWXUHGE\%6++DXVJHUlWH*PE+XQGHU7UDGHPDUN/LFHQVHRI6LHPHQV$*
*8001146702*
8001146702 (9903)
en
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising