Sharp | LC-32FI5342K | Instruction manual | Sharp LC-32HI5332K HD Ready Smart LED TV Instruction Manual

Sharp LC-32HI5332K HD Ready Smart LED TV Instruction Manual
Operating Instructions
Smart LED TV with Freeview HD
Image for illustration purposes only. Actual product may vary.
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd 1
07/03/2018 16:27:44
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:2
07/03/2018 16:27:45
Manufacturers Guarantee
IMPORTANT GUARANTEE INFORMATION
Congratulations on purchasing this television. We hope you have many years of trouble free
enjoyment from your purchase.
Your product is covered under the manufacturers guarantee for 12 months from the date
of purchase.
If you experience any difficulties with your TV, please refer to the ‘Frequently asked questions’ section
at the rear of this user guide.
If you are still unable to remedy the issue, try resetting the TV to factory settings - details can be found in
the ‘Settings’ menu section of this user guide - alternatively, please contact the helpline.
In the event that a fault is diagnosed, the helpline will arrange to collect the TV from your home
or work address, return it to our service centre, repair the item and then return it to you.
If we believe we cannot offer a permanent repair, we will replace the item.
Technical Support Information
Telephone UK 0330 024 0803, ROI 01443 3323
Web support: www.umc-uk.co.uk
Email: service@umc-uk.co.uk
Calls to 0330 numbers are charged at standard call rates and are included as part
of any bundled minutes with your phone provider.
The telephone opening hours are Monday to Friday 8.30am to 6pm, Saturday 9am – 5pm.
UK: Calls are charged at your normal telephone call rate.
ROI: Calls are charged at a local rate.
Please retain all packaging materials, in addition to your proof of purchase/receipt,
as you will need these in the event of warranty/service support.
This guarantee is in addition to and does not affect your statutory rights.
If you need to call the helpline, you will need the following information.
1) Model No
______________________________________ (You can find this on the rear of the TV)
2) Date of purchase
______________________________________ (You can find this on your sales receipt)
3) Serial Number
______________________________________ (You can find this on the rear of the TV)
EXAMPLE OF LABEL ON REAR OF TV
Model No
Serial No.
This TV set is for domestic use only
3
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:3
07/03/2018 16:27:45
Important Safety Instructions
Please read these instructions. All of
the safety and operating instructions
should be read before the appliance
is operated.
Warnings
• Television sets with 40” screens or larger must be
lifted and carried by at least 2 people.
• This television does not contain any parts that are
serviceable by the user. In the event of a fault, contact
the manufacturer or authorised service department.
• Exposing the internal parts of the TV may endanger
your life. The manufacturers guarantee does not
extend to faults caused by repairs carried out by
unauthorised third parties.
To prevent spread of fire,
keep candles or other open
flames away from this product
at all times
• Do not use the TV set immediately after unpacking.
Wait until the TV warms up to room temperature
before using it.
• To reduce the risk of fire, electric shock or damage
to the TV, do not expose it to dust, rain or moisture.
Never expose the TV to dripping or splashing and do
not place objects filled with liquids on or near the TV.
• Do not connect any external devices (DVD player,
games console etc) when the TV is switched on.
Disconnect both the TV and device from the mains
before connecting. Only switch appliances on when
the connection process is complete.
• Do not place the television in a confined space and
do not obstruct the ventilation openings at the rear of
the television.
• When installing on a wall, ensure the TV is at
least 5cm from the wall for ventilation.
• Always ensure that the TV’s ventilation openings
are not covered with items such as newspapers, tablecloths, curtains, etc.
• Dispose of this television and any components
including batteries in an environmentally friendly
manner. If in doubt, please contact your local authority
for details of recycling.
• Ensure this TV is used in moderate climates only.
• In case of electrostatic discharge (ESD) the TV may
operate incorrectly. If this happens, turn the set off
at the mains and then turn back on again after 30
seconds. The set should now work normally.
WARNING: Never place a television set on an
unstable location. The TV set may fall causing
serious personal injury or death. Many injuries,
particularly to children, can be avoided by taking
simple precautions such as:
• Use cabinets or stands recommended by the
manufacturer of the television set.
• Only use furniture that can safely support the
television set.
• Ensure the television set is not overhanging the
edge of the supporting furniture.
• Do not place the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television
set to a suitable support.
• Do not place the television set on cloth or other
materials that may be located between the television
set and supporting furniture.
• Please educate children about the dangers of
climbing on furniture to reach the television set or its
controls.
• If your existing television set is being retained and
relocated, the same considerations as above should be
applied.
Safety
• For your safety, this appliance is fitted with a fused
3 pin mains plug. Should the fuse need to be replaced,
ensure that any replacement is of the same amperage
and approved with the BSI mark.
• Never try and replace the mains plug unless
you have adequate qualifications and are legally
authorised to do so. In the event that a replacement
mains cable is required, contact the manufacturer for a
suitable replacement.
• Never use the television if it is damaged in any way.
• Always place the television on a flat level surface
avoiding anywhere which may be subject to
strong vibration.
• The ideal distance to watch the television is
approximately five times the length of the diagonal
measurements of the TV screen.
• Ensure the television is not placed on top of the
power cable as the weight of the television may
damage the cable and cause a safety hazard.
• Never place mobile phones, speakers or any
other device which may cause magnetic or radio
interference, near the television. If interference is
apparent, move the device causing the interference
away from the television.
• To disconnect the set from the mains, remove the
mains plug from the socket.
• Ensure that the mains plug is always easily
accessible.
• When handling the set do not grip the LCD Panel.
• Do not pull the set when mounted on a bracket. If
using a moveable bracket, adjust via the bracket and
not the TV set.
• Do not place this set above a heat source.
WARNING: Excessive volume when using
earphones and headphones can cause loss
of hearing.
4
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:4
07/03/2018 16:27:45
Important Safety Instructions
Maintenance
• To clean your TV, wipe with a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth dipped
in a soap and water solution or a weak detergent
solution.
• Never use alcohol, paint thinner or benzene to
clean this unit.
• Before using a chemically treated cloth, read the
instructions that came with the cloth carefully.
CAUTION: If water or other liquid enters the
television through the display panel surface,
a malfunction may occur.
• TV channel logos: e.g. shopping channel logos and
pricing displays - especially if they are bright and stationary.
Moving or low-contrast graphics are less likely to cause
ageing of the screen.
• Time displays.
• Teletext: Do not view a static page for a long period of
time
• TV/DVD menus: e.g. listings of DVD disc content.
• Pause mode: Do not leave the TV in pause mode
for long periods of time, e.g. when watching DVDs
or videos.
Important: Once ‘shadow image/screen burn’
occurs, it will never disappear and is not
repairable under warranty.
How do I dispose of this product?
UK: Waste electrical products should not
be disposed of with household waste.
Please dispose of the product at a
designated collection point for recycling
of WEEE. For your nearest facilities, please
see www.recycle-more.co.uk or in store
for details.
ROI: Waste electrical products should not
be disposed of with household waste. Separate
disposal facilities exist. Check with your local
authority or retailer for recycling advice.
Cd
Batteries
Packaging
• The safest way to transport your item is in the
original box/packaging - please save your packaging
for this.
• You will need the original box/packaging in the
event of warranty/service repair or support. We are
unable to carry out warranty/service if you are unable
to package the item correctly.
Important information regarding use of video
games, computers, captions or other fixed image
displays
The extended use of fixed image program material can
cause a permanent “shadow image” on the LCD/LED panel,
also known as “screen burn”.
This “shadow image” can appear in the background during
normal viewing. This type of irreversible LCD/LED panel
deterioration can be limited by observing the following
steps:
1. Reduce the brightness/contrast setting to a minimum
suitable viewing level.
2. Do not display the fixed image for extended periods
of time.
3. Turn the power off when not in use.
Examples of images that are more likely to cause “screen
burn” are as follows (this is not an exhaustive list):
• Do not expose batteries to high temperatures, excessive
heat, prolonged sunshine or fire as this may cause leakage,
explosion or ignition.
Observe the correct polarity when inserting batteries.
• Do not use different types of batteries together or mix
old and new batteries.
• Dispose of batteries in an environmentally
friendly way.
• Certain regions may regulate the disposal of batteries.
Please consult your local authority.
Caution
• Appliances with built in DVD player are marked with this
caution label
• THIS UNIT IS A CLASS 1 LASER
CLASS 1
PRODUCT. THIS UNIT USES A
LASER PRODUCT
VISIBLE LASER BEAM WHICH
COULD CAUSE HAZARDOUS
RADIATION EXPOSURE IF
DIRECTED. BE SURE TO OPERATE THE PLAYER CORRECTLY
AS INSTRUCTED WHEN THIS UNIT IS PLUGGED INTO THE
WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE
OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT.
• USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
• DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
CE Statement:
Hereby, UMC Poland Sp. z o.o. declares that this LED
TV is in compliance with the essential requirements
and other relevant provisions of
RED Directive 2014/53/EU.
http://www.sharp.eu/av/documents-of-conformity
5
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:5
07/03/2018 16:27:45
Trademarks
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing, LLC in the United States and
other countries.
The “HD TV” Logo is a trademark of DIGITALEUROPE.
The “HD TV 1080p” Logo is a trademark of DIGITALEUROPE.
The Wi-Fi CERTIFIED Logo and Miracast® are registered
trademarks of Wi-Fi Alliance. Wi-Fi CERTIFIED Miracast™ is a
trademark of Wi-Fi Alliance.
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks,
service marks, or certification marks of the Digital Living
Network Alliance.
For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Licensing Limited. DTS, the Symbol, &
DTS and the Symbol together are registered trademarks.
DTS TruSurround is a trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.
The DVB logo is the registered trademark of the Digital Video
Broadcasting (DVB) project.
The FREEVIEW text and logos are trademarks of DTV Services
LTD. © DTV Services Ltd
SAORVIEW is a registered trademark owned by RTÉ.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio and the double-D symbol are trademarks
of Dolby Laboratories.
The “CI plus” Logo is a trademark of CI Plus LLP.
YouTube and the YouTube logo are trademarks of Google Inc.
6
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:6
07/03/2018 16:27:45
CONTENTS
Manufacturers Guarantee Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Securing the TV to a Wall/Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
TV Buttons and Input Source Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
TV Control Stick and Input Source Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-15
Connecting the TV to the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
7 Day TV Guide and Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
TV Menu Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-28
Picture Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19
Sound Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21
Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-28
Channel Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-23
Network Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Time Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Lock Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-28
More Apps Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-30
Media Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31-32
DVD Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
USB Record/PVR-Freeview/Saorview Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-35
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-39
Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-38
Compatible file types for USB/DLNA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
7
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:7
07/03/2018 16:27:45
Securing the TV to a wall/wall mounting
SECURING THE TV TO A WALL
Securing the TV to a wall with anti-tip straps
For maximum security in the home, when using a TV with its stand, anti-tip straps should be fitted. These
are available from major retailers & websites and are an easy, inexpensive and effective way of ensuring
your TV stays safely upright. Straps are designed to be attached to the rear of the TV and then tethered
to the wall or the furniture the TV is stood on, these are fitted as follows.
A) Using one or both of the top wall-mounting
holes and screws fasten one end of the fastening
cord/s to the TV. (the screws are already supplied in
the wall mounting holes)
B) Secure the other end of the fastening cord/s to
your wall. (you will need screws/fixings suitable
for your wall type - available separately from most
DIY stores).
Note: Please ensure that children do not climb on the TV set.
Note: When handling the set do not grip the LCD Panel.
Note: Do not pull the set when mounted on a bracket. If using a moveable bracket, adjust via the
bracket and not the set.
The Royal Society for the Prevention of Accidents is urging people to take care with flat-screen televisions.
RoSPA stated in 2010 that “Toddlers are particularly at risk of pulling flat-screen televisions on to
themselves. They are unsteady on their feet and are attracted by colourful television images.”
The risk is increased as televisions become lighter.
Wall mounting
IMPORTANT - Before drilling any holes in the wall ensure you are not drilling where there
could be any electrical wires, water or gas pipes.
1) Remove the four screws located at the back of the TV set.
2) The wall mount can now be easily attached to the mounting holes, located
on the back of the TV, using the same four screws removed.
For optimum viewing, if wall mounting the TV higher than eye level, the TV should be tilted downwards
so that the TV’s screen is ‘face on’. See fig 1 and 2.
fig 1
INCORRECT
TV
Viewing angle
8
fig 2
CORRECT
TV
Viewing angle
Important – If wall mounting this TV, only use the screws already provided in the wall mounting holes.
Using other screws which are longer could cause irreparable damage to internal parts. When using a
wall bracket, please ensure the screws in the back of the TV set are not over tightened.
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:8
07/03/2018 16:27:45
TV Buttons and Input Source Menu
TV BUTTONS AND INPUT SOURCE MENU
For models with buttons on the side/underside/rear of the TV
Button layout and shape may vary.
Standby
Power On/Off
Source
Input source menu
Menu
Menu/OSD
CH-
Programme/Channel down and menu down
CH+
Programme/Channel up and menu up
Vol-
Volume down and menu left
Vol+
Volume up and menu right
Models with built in DVD players will include additional buttons:
Play/Pause Disc
Stop/Eject Disc
Choosing Mode Input/Source
To switch between the different inputs or
connections.
For further information on inputs and connections
refer to the ‘Connections’ pages.
A) Using the buttons on the remote control:
1) Press [SOURCE] - The source menu will appear.
2) Press [<] or [>] to select the input you require.
3) Press [OK].
An example of the ‘Input Source’ menu
(will vary by model)
B) Using the buttons on the Television:
1) Press [SOURCE].
2) Scroll up/down using VOL+/ VOL- buttons to
the input/source you require.
3) Press [SOURCE] to change input/source to the
one selected.
9
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:9
07/03/2018 16:27:46
TV Control Stick and Input Source Menu
TV CONTROL STICK AND INPUT SOURCE MENU
For models with the joystick type controller.
Control Stick
DVD Buttons
An example of the ‘Input Source’ menu
(will vary by model)
TV Control Stick
The TV control stick is located on the back of the TV. The control stick can be used to control many of the
TV functions. The shape of the TV’s control stick may vary by model.
While TV is in standby mode:
• Press the centre of the control stick once - Power on the TV set
While watching TV:
• RIGHT/LEFT – volume up/volume down
• UP/DOWN – changes channel up/down
• Press the centre of the control stick once – displays the menu
• Press and hold the centre of the control stick – Standby/Power Off
While in menu:
• RIGHT/LEFT/UP/DOWN – navigation of cursor in on-screen menus
• Press the centre of the control stick once – OK/Confirm selected item
• Press and hold the centre of the control stick – back to previous menu
DVD Buttons (Only applies if the TV has an in-built DVD player)
The DVD buttons are located on the side of the TV near the DVD Slot.
• TOP BUTTON – STOP/EJECT (Hold down for 4 seconds to eject a DVD).
• BOTTOM BUTTON – PLAY/PAUSE.
Choosing Mode Input/Source
Use the source menu to switch between input/connections.
A) Using the buttons on the remote control:
1. Press [SOURCE] - The source menu will appear.
2. Press [<] or [>] to select the input you require.
3. Press [OK].
B) Using the TV control stick:
1.
2.
3.
4.
5.
Press the centre of the control stick once to enter the TV menu.
Press the control stick left/right and navigate through to SOURCE menu.
Press the centre of the control stick to enter the SOURCE menu.
Press the control stick left/right to scroll through and select the input/source you require.
Press the centre of the control stick to select the chosen input/source option highlighted.
For further information on input/connections please view the ‘Connections’ pages
10
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:10
07/03/2018 16:27:47
Connections
CONNECTIONS
Note: The TV input/output connections and connecting cables on these pages are shown for reference.
Cables are available separately from your retailer. Not all connections are available on all TV models.
Connecting to a device with a Composite AV/Video output
TV source should be set to Composite/AV
Connection example for TV models with Mini-AV input
L (white)
R (red)
AV in
Video
(yellow)
Connection example for TV models with AV input
L (white)
L (white)
R (red)
R (red)
Video
(yellow)
Video
(yellow)
Connecting to a device with SCART output
TV source should be set to SCART
Connection example for TV models with SCART input
Scart
Scart
Connection example for TV models with Mini-SCART input
Mini
Scart
Scart
11
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:11
07/03/2018 16:27:48
Connections
CONNECTIONS
Connection example for TV models with Mini-AV input (1)
AV in
Scart
Connection example for TV models with Mini-AV input (2)
AV in
Scart
Connection example below for TV models with L/R Audio and Video inputs
L (white)
R (red)
Scart
Video
(yellow)
Connecting to a device with Component/YPbPr output
If you are supplied with a cable from the device which has RED, GREEN, BLUE, RED & WHITE connectors
you must connect via Component (for picture) and by phono cable (for sound). TV source should be set
to Component/YPbPr
Connection example for TV models with Mini-YPbPr and Mini-AV inputs
Y (green)
PB (blue)
YPbPr
PR (red)
L (white)
R (red)
AV in
Video (yellow)
is not connected
12
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:12
07/03/2018 16:27:48
Connections
CONNECTIONS
Connection example for TV models with Mini-YPbPr and L/R audio inputs
Y (green)
YPbPr
PB (blue)
PR (red)
L (white)
L (white)
R (red)
R (red)
Connection example for TV models with YPbPr and L/R Audio inputs
Y (green)
Y (green)
PB (blue)
PB (blue)
PR (red)
PR (red)
L (white)
L (white)
R (red)
R (red)
Connection example for TV models with YPbPr and Mini-AV inputs
Y (green)
Y (green)
PB (blue)
PB (blue)
PR (red)
PR (red)
L (white)
R (red)
AV in
Video (yellow)
is not connected
Connecting to an external audio device (Amplifier, Surround Sound,
Sound Bars etc)
When connecting via the TV’s 3.5mm earphone output, this will disable the TV speakers.
OPTION 1 for 3.5mm earphone output.
3.5mm
audio
in
3.5mm
earphone
OPTION 2 for 3.5mm earphone output.
L (white)
3.5mm
earphone
R (Red)
Digital
audio
out
(optical)
OPTION 3 for digital optical audio output.
Digital
Digital
audio
Audio
in
in
(optical)
(Optical)
Note: When connecting an external audio device to the TV, set the TV volume to a higher than normal
level, you will then be able to use your device remote control to adjust the volume of the connected
device to suit your requirements.
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:13
13
07/03/2018 16:27:49
Connections
CONNECTIONS
Connecting to a device with HDMI output
An HDMI cable can output both video and audio and enables you to enjoy digital-quality video and audio
with minimal loss of quality.
TV source should be set to the corresponding HDMI port (HDMI 1, HDMI 2 etc)
HDMI
HDMI
Connecting to a device with VGA/PC output (Laptop or Desktop Computer)
TV source should be set to VGA/PC
Depending on the PC/Laptop connected, you may need to configure your PC graphics card/adaptor to suit
the screen resolution/Hz.
VGA/PC
in
VGA/PC
out
VGA/PC
(audio
in)
Audio
out
Connecting to a device with RF output (CCTV or other Analogue devices)
TV source should be set to ATV/Analogue TV.
Note: You will need to manually tune your device into an analogue channel.
RF out
RF in
RF in
14
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:14
07/03/2018 16:27:49
Connections
CONNECTIONS
Connecting an Ethernet/Network cable
The Ethernet port is used for Smart connectivity, Pay TV Services and Freeview HD (Freeview services are
only available in the UK).
Ethernet
port
Ethernet
port
Connecting to a USB device
To use the USB input, TV source should be set to USB Media. Tablets and/or phones can
be charged via the USB port but cannot be used to playback media content. TV source should be set to
USB Media.
OPTION 1 for connection to a USB memory stick to the USB input.
USB
OPTION 2 for connection to an external hard drive to the USB input.
Mini
USB
USB
Note: Tablets and/or phones can be charged via the USB port, however, it is not possible to play back
media from these devices.
Note: Some USB devices may need to be connected to an external power supply before being used with
this input, i.e. powered hard drive.
Connecting the TV to Earphones
When connecting via the TV’s 3.5mm earphone output, this will disable the TV speakers.
3.5mm
earphone
15
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:15
07/03/2018 16:27:50
Connecting the TV to the Internet
CONNECTING THE TV TO THE INTERNET
When you first power on your new SMART TV there will be an option to follow various on-screen set up
instructions. These instructions will enable you to connect to the internet via your home network.
You can connect to your home network either wirelessly or with an Ethernet cable.
If you decide not to follow the initial set up instructions and need to connect at a later date please follow
these simple steps below:
Connecting your TV with a wireless connection
1) Press [MENU] on the remote control.
2) Scroll through the menu, select ‘Settings’ then enter the ‘Network’ menu.
3) Ensure ‘Network Configuration’ is set to Wi-Fi and scroll down and select ‘Wi-Fi Config’.
4) Within the ‘Wi-Fi config’ options, highlight and select ‘Wi-Fi Auto Search’.
5) The TV will then automatically search for networks.
6) Select the preferred type of network connection then enter the network.
If a password is required:
• A padlock is shown next to a Wi-Fi service, this indicates that it is a secured network and will require a
password to log in.
• When entering the Wi-Fi password, we recommend using the ‘Password Visible’ feature. To make the
password visible select the ‘Password Visible’ box on screen, the password will then be displayed in
full. Refer to fig 1. Network passwords are case sensitive, please ensure the entered text matches the
password exactly for a successful connection.
• Use the remote control arrow buttons to select the character required. Press the [OK] button
repeatedly until the character you want is displayed. To move onto the next letter, wait for a few
seconds before selecting. When the password has been entered, select the ‘Enter’ button on the onscreen keypad and press [OK] on the Remote Control.
7) The TV will then establish a connection.
Note: An icon will appear in the top right hand side of the ‘Application’ menu to confirm the TV is
connected to the internet.
Connecting your TV with an Ethernet/LAN cable:
1) Plug in your Ethernet cable into the RJ45 (Ethernet) socket located at the rear of the television.
Ethernet
port
2) Press [MENU] on the remote control. Please refer to the Quick Start Guide for remote control
information.
3) Scroll through the menu, select ‘Settings’ then enter the ‘Network’ menu.
4) In ‘Network Configuration’, select ‘Cable’.(fig.2).
5) TV set will automatically configure itself.
6) Exit the menu by pressing [EXIT] on the remote control.
fig.2
fig.1
16
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:16
07/03/2018 16:27:50
7 Day TV Guide and Channel List
7 DAY TV GUIDE AND CHANNEL LIST
TV Guide is available in Saorview/Freeview TV mode. It provides information about forthcoming
programmes (where supported by the Saorview/Freeview channel). You can view the start and end time of
all programmes and on all channels for the next 7 days and set reminders.
1) Press the [TV GUIDE] button on the remote control and the following 7 Day TV Guide will appear:
Note: Freeview HD channels found during tuning
will be placed in channel positions above 100, for
example, 101 - BBC 1 HD, 102 - BBC 2 HD etc.
2) Navigate through the menu using
.
You can now:
Press [GREEN] on a highlighted programme to set a reminder:
- reminder will only occur for this one programme at the time selected.
• Select Remind Once
• Select Daily Reminder
- reminder will occur every day at this time
• Select Weekly Reminder
- reminder will happen every week, on this day and at this time.
Press [YELLOW] to view a previous day’s list of programmes.
Press [BLUE] to view the next day’s list of programmes.
Press [RED] on a highlighted programme to use the record function. (Function for USB Record/PVR models
only, USB device must be connected):
- press the [RED] button once.
• Record a programme once
• Set up a daily recording
- press the [RED] button twice, a recording will occur daily at this time.
• Set up a weekly recording
- press the [RED] button three times, recording will happen every week,
on this day and at this time.
Press [INFO] to view further information about the programme highlighted.
3) Press [EXIT] to exit the 7 day TV Guide
Note: Record functions are only applicable to sets with a built in USB Record/PVR function.
Note: When the TV set is on, a reminder message will be displayed informing you that a programme is
about to start. If the set is in standby, then it will turn on at the reminder time.
Note: When recording in standby mode, the set will not turn on. While recording in standby, the light
on the front of the set will flash.
Channel List
To view the channel list, please ensure that the TV is set to either the analogue or digital source and
no menus or TV notifications are displayed.
1) Press [OK] on the remote control and the
channel list menu will appear.
2) Press [LEFT] or [RIGHT] arrow to filter desired channel types (Digital TV,
HD channels, Radio, Data, All).
3) Scroll through the channel list by using
buttons then
press [OK] to view the channel that is currently highlighted.
4) Press [EXIT] to exit the channel list.
17
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:17
07/03/2018 16:27:50
TV Menu Operation
PICTURE MENU
To access this menu, press [MENU] button on the remote control.
To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll
buttons.
To confirm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Picture Mode - Choose from the following presets:
Dynamic
Recommended settings for fast moving pictures
Standard
Standard settings
Movie
Picture has less colour and is darker.
Personal
Allows you to change the picture settings to your personal preference.
These settings are saved automatically.
Economy
Power saving mode which reduces the energy used by up to 25% (by reducing
the power to the LED/LCD panel). In Economy mode, the TV will switch itself to
Standby mode after 3-5 hours in the event that the TV buttons or remote control
buttons are not pressed (change the picture mode to another setting to de-activate
this function)
You can make the following adjustments in Personal mode:
Contrast - Switch the balance between black and white.
Brightness - Increase or decrease the brightness of the picture.
Colour - Changes the picture between colour and black and white.
Sharpness - Increase or decrease the sharpness of the picture.
Colour Temperature - Choose from the following presets:
Normal
Default settings
Warm
Increases red within the picture
Cold
Increases blue within the picture
18
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:18
07/03/2018 16:27:51
TV Menu Operation
PICTURE MENU
Aspect Ratio - Within the UK the picture format varies depending on the channel/broadcast. There are a
number of different options to best meet your needs
Auto
Dot by Dot
Automatically displays the best picture format so
the picture is in the correct position. Black lines may
appear at the top/bottom and/or sides.
Will display the picture in its original resolution without
any change, only available in HDMI input source.
16:9
Full Screen
Displays a picture in
the full screen mode
without overscan.
16:9 signal will be
displayed in original
proportion. Other
picture format will
be stretched to fill
the screen
Fills the screen with
a regular 16:9 signal
and 4:3 picture
format will be
stretched to fill
the screen
Zoom1 and Zoom2
4:3
Displays the 4:3
picture in its
original size.
Side bars are
shown to fill the
16:9 screen
The picture
is the correct
proportion
but zoomed
in to fill the
screen
Expert settings - These will vary depending on the set. They are different for Active Motion 200 and
Active Motion 400 sets as detailed below:
Expert Setting
Range
Noise Reduction On or Off
Active Contrast
On or Off
Active Motion 200 Sets
Description
Reduces the noise in the picture
Automatically optimises the backlight and contrast of
the picture according to the brightness of the screen
Active Motion 400 Sets
Expert Setting
Range
Description
Noise Reduction Off/Middle/High/Low/Auto Reduces the noise in the picture
Automatically optimises the backlight and contrast of
Active Contrast On or Off
the picture according to the brightness of the screen
Gamma
Medium/Low/High
Changes the contrast range of the picture depending
on the input signal
R/G/B Controls
Backlight Mode
Backlight
0 to 100
Scanning/Standard
0 to 100
Controls the level of each colour in the picture
Sets the processing mode of the backlight
Changes the light level of the backlight
19
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:19
07/03/2018 16:27:51
TV Menu Operation
SOUND MENU
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK]
buttons.
If you wish to make changes to any of the default settings, use the scroll
To confirm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Sound Mode - Choose from the following presets:
Standard
Default settings
Music
Emphasises music over voices
Movie
Provides live and full sound for movies
Sports
Emphasises sound for sports
Personal
Allows you to change the sound settings to your personal preference. These
settings are saved automatically
EQ - Adjust the audio level of separate frequencies via the band equaliser.
Balance - To switch the sound between the left and right speakers.
Auto Volume Level (AVL) - When ‘ON’ is selected, the volume will attempt to stay at a constant level
regardless of the TV programme and advertisements.
Note: Equaliser settings can only be adjusted when the sound mode ‘Personal’ is selected.
DTS TruSurround - Choose from the following options:
OFF
Disables the DTS TruSurround audio feature
ON
TruSurroundTM creates an immersive, feature-rich surround sound experience
from two speakers, complete with rich bass, high frequency detail and clear dialog.
For DTS patents, see http://patents.dts.com. Manufactured under license from
DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are
registered trademarks. DTS TruSurround is a trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.
20
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:20
07/03/2018 16:27:51
TV Menu Operation
SOUND MENU
Digital Output - This is the digital audio output. Choose from the following options:
Off
To turn off Digital Output
Auto
Selects the best settings automatically
PCM
Select this option if you are connecting to a Stereo Hi-fi via a digital audio cable
(Pulse-code modulation (PCM) is a digital representation of an analogue signal)
Audio Description - Allows you to switch ‘ON’ or ‘OFF’ Audio Description. This provides a description of
what is happening during the selected programme for a person who is visually impaired. This feature is not
available on all programmes.
AD Volume - This allows you to increase and decrease the AD (Audio Description) volume level.
Audio Track - Allows you to choose between the audio channels being transmitted on Digital Television.
Currently for Freeview only normal sound or the Audio Description audio channels can be selected.
Audio Delay - Enables you to adjust setting to sync picture and audio.
SPDIF Delay - Enables you to adjust sound setting to sync picture and audio for external speakers connected
via digital audio output.
21
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:21
07/03/2018 16:27:51
TV Menu Operation
SETTINGS - CHANNEL MENU
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll
buttons.
To confirm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Auto Tuning - Allows you to retune the television for all digital channels, digital radio stations and
analogue devices.
Analogue Manual Tuning - Allows you to manually tune your analogue signal.
Freeview/Saorview Manual Tuning* - Allows you to manually tune your digital signal.
Freeview SMART Retune - This feature allows the TV to scan for Freeview channels. When new channels
are found they are automatically added to your channel list without removing any channels or affecting
your favourites list.
Channel Edit - Allows you to delete, move, skip and add programs to a
favourite channels list. You can add a favourite channel list which can be
accessed by pressing the favourite button on your remote control. This will
enable you to select your preferred channels quickly and easily. To add a
channel to the favourite list go to; Menu > Settings > Channel > Channel
Edit. Select the channel which you would like to add to the favourite list
and press the favourite button on the remote control. A heart symbol will
appear next to the channel name. Repeat for another channel or press
[EXIT] to leave the menu. If you now press the favourite button on the
remote control your favourite channels will be listed, select your desired
channel and press the [OK] button to watch.
Important: To receive Freeview/Saorview channels, in particular HD
channels, you will need a Digital TV aerial and be in a good Freeview/
Saorview coverage area. You can check the coverage for your area at
www.freeview.co.uk or www.saorview.ie
Please note that any Freeview HD channels found during tuning will
be placed in channel positions above 100. For example, 101 (BBC1 HD)
102 (BBC2 HD) etc.
*Freeview channels are only available in the UK, Saorview channels are only available in the ROI.
22
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:22
07/03/2018 16:27:51
TV Menu Operation
SETTINGS - CHANNEL MENU
Signal Information - Allows you to view signal frequency, signal quality and signal strength.
CI Information - Pay per view services require a ‘Smartcard’ to be inserted into the TV. If you subscribe to
a pay per view service the provider will issue you with a ‘CAM’ and a ‘Smartcard’. The ‘CAM’ can then be
inserted into the COMMON INTERFACE PORT (CI Card In).
Schedule List - The schedule list allows you to view your reminders and recordings. It can be accessed
by going to the ‘Channel Menu’ then selecting ‘Schedule List’ or by pressing the blue button while in the
‘Record List’.
There are two icons, the clock symbol denotes a reminder, the camera indicates a recording. To select use
the up and down arrow buttons.
•
Press the [RED] button to delete the reminder or recording
•
Press the [GREEN] button to edit the reminder or recording
•
Press the [YELLOW] button to sort the reminder or recording
Note: Record functions are only applicable to sets with a built in USB Record/PVR function.
Edit Menu - To edit use the up and down buttons on the remote control to select the function, then use
the left and right buttons to change. Press the [OK] button to store and return
to the schedule list.
Recorded List - Shows a list of recorded TV programmes via a connected USB memory stick or USB
hard drive. While in the ‘Recorded List’, press the [BLUE] button to access the ‘Schedule List’. Please see
the ‘USB RECORD’ page for further information.
OAD Scan - Switch ‘ON’ or ‘OFF’ OAD updates.
23
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:23
07/03/2018 16:27:51
TV Menu Operation
SETTINGS - NETWORK MENU
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK]
buttons.
If you wish to make changes to any of the default settings, use the scroll
To confirm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
The network connection enables you to update the TV software and a number of Smart TV functions.
For the network configuration to work the TV will need to be connected to your home network via an
Ethernet cable, with these requirements in place the TV will connect to the network automatically.
Network Config (Cable selected)
IP Config - Allows you to access LAN network connection settings via the TV’s LAN Cable socket. Choose from
the following options:
Auto
Will automatically connect the TV to your home network (this is the default setting
and is highly recommended).
Manual
Allows you to manually change the IP, Netmask, Gateway and DNS information.
Network Config (Wi-Fi selected)
Wi-Fi Config - Allows you to access LAN network connection via the TV’s built in Wi-Fi (no extra hardware
required). Choose from the following option:
Wi-FI Auto
Will automatically search for nearby routers. Select the desired router and enter
Search
its password, following the on screen instructions will result in a successfully
connection.
Network Info - Allows you to view Information about network settings.
Network Test - Allows you to test the network connection.
Netflix Setting - Allows you to view Netflix information for technical assistance and deactivate your account.
Wi-Fi Status - Allows you to view the routers name (SSID), if the TV is connected via Wi-Fi.
24
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:24
07/03/2018 16:27:51
TV Menu Operation
SETTINGS - TIME MENU
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK]
buttons.
If you wish to make changes to any of the default settings, use the scroll
To confirm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Auto Sync - The time is synchronised with the Internet clock. If there is no internet connection, the time is
synchronised with the Digital Television signal.
Clock - Shows the date and time.
Off Time - Allows you to set a specific time for your TV to turn off.
On Time - Allows you to set a specific time for your TV to turn on, the channel it will then display, the
source it will be on and also the volume. This function can then be toggled to repeat every day or
a certain day. If your set is in standby and the on time is reached, it will turn on.
Sleep Timer - Lets you set the sleep timer so the television automatically switches off after a set amount of
time. Off -> 10min -> 20min -> 30min -> 60min -> 90min -> 120min -> 180min -> 240min.
OSD Timer - Lets you adjust the amount of time the ‘On Screen Menu’ stays on the screen before
disappearing.
Auto standby - Set ‘Auto standby’ between Off, 3 hours, 4 hours and 5 hours.
Time Zone - Change your current time zone.
Note: If you do not press any buttons for 30 seconds, the menu will automatically exit. You can change
the length of time before the menu exits automatically - see ‘OSD Timer’ in the Time Menu.
25
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:25
07/03/2018 16:27:52
TV Menu Operation
SETTINGS - LOCK MENU
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll
buttons.
To confirm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
System Lock - Allows you to lock or unlock the menu. You will be asked to enter a 4 digit password
Use the ◄ button to quit the password input or use the ► button to clear. Default password is 0000.
Set Password - Allows you to change the password.
Channel Lock - Allows you to lock certain channels manually.
Parental Guidance - Allows you to set the rating to block certain content based on age information.
Key Lock - Allows you to lock the buttons on the side of the TV set.
Source Lock - Allows you to lock the source menu.
Hotel Mode - Additional settings.
Note: To enable controls within the lock menu, the function needs to be enabled by entering the
password and then turn the ‘System Lock’ on.
Note: If you change and forget the password, you will need to use the master reset password of 4711.
26
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:26
07/03/2018 16:27:52
TV Menu Operation
SETTINGS - SETUP MENU
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK]
buttons.
If you wish to make changes to any of the default settings, use the scroll
To confirm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Set Up - Choose from the following options:
Language - Allows you to change the language of the menu.
Audio Languages - Select your preferred primary audio language.
Audio Languages 2 - Select your preferred secondary audio language.
Subtitle Language - Select your preferred primary subtitle language.
Subtitle Language 2 - Select your preferred secondary subtitle language.
Hearing Impaired - This allows you to turn on the Hearing Impaired function, this produces subtitles on
the screen which provide a description of what is happening during the selected programme.
Blue Screen - Changes the background when there is no input between clear and a blue background
(only available on some sources).
PVR File System - Allows you to access ‘PVR File System’ settings. Choose from the following options:
Select Disc
Allows you to select the device which is being analysed/set up should your set have
more than one USB port/connected device.
Timeshift Size
Maximum amount of storage space allocated to time shifting on the selected
USB device. Select from 512MB, 1GB, 2GB or 4GB. Maximum memory allocation is
dependant upon connected memory capacity.
Format: Start
Select this option to reformat the connected USB device. Note that all data will be
Speed: Check
Checks the speed of your memory device and displays the result in Kb/s
lost when performing this action.
Note: When a USB memory device is connected to the set, this function will be active. If no USB device is
connected, the function cannot be selected.
27
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:27
07/03/2018 16:27:52
TV Menu Operation
SETTINGS - SETUP MENU
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll
buttons.
To confirm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
First Time Installation - Allows you to access the ‘First Time Installation’ menu and retune the TV set.
Software Update (USB) - Allows you to update your TV with the newest software using a USB memory
stick. Software and instructions are available on our website.
Software Update (NET) - Allows you to update your TV with the newest software via your internet
connection.
Reset TV - This resets the menus to factory settings and clears all the TV channels from the television.
HDMI CEC (Consumer Electronic Control) - Allows HDMI devices to control each other and allows you to
operate multiple devices with one remote control (only available with compatible devices).
LED Status - LED Status - Allows you to switch the LED power indicator light ‘ON’ or ‘OFF’ when the TV
is being operated.(When this option is set to ‘OFF’ the LED power indicator light will flash when the
remote control is used and will flash red during the normal start up process).
Standby Scan - When the TV is put into standby mode a standby scan will be performed, during
this process the TV will scan for new channel information and automatically update the channel list if any
changes are found, both the visual and audio functions will be off, once the scan is complete the TV will
stay in standby mode.
Version Info - Allows you to view the version/information of the software installed on the TV set.
Source Edit - Allows you to edit the name of an Input Source.
28
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:28
07/03/2018 16:27:52
TV Menu Operation
MORE APPS MENU
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK].
buttons.
If you wish to make changes to any of the default settings, use the scroll
To confirm any settings press [OK] button.
To exit this menu at anytime, press the [MENU], [EXIT] or [BACK] button on the remote control.
As well as the Netflix, BBC iPlayer and YouTube apps included in the main menu, the ‘More Apps’ menu,
located at the bottom of the screen, allows you to access more of the TV set’s ‘SMART’ features such as
Web Browser, BBC News, BBC Sport etc.
Aquos Net+
Aquos Net+ is a portal to a variety of Apps and multimedia which the TV acesses via the internet.
To enter Aquos Net+ you will be prompted to enter a language and accept terms and conditons. Once the
relevant information has been entered you will be able to access a range of additional Apps.
Content is updated and managed from a central source, so look out for new Apps and updates.
Note: If you wish to reset the settings for AQUOS NET+ Smart Portal back to the default settings, you
will need to access the AQUOS NET+ Smart Portal and enter the settings menu. In the settings menu
scroll down and select ‘Reset your device’, you will then be asked ‘Yes’ or ‘No’ to confirm your decision,
highlight ‘Yes’ and press [OK] on the remote control to complete the reset process.
29
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:29
07/03/2018 16:27:52
TV Menu Operation
MORE APPS MENU
Applications
BBC iPlayer - Catch up on your favourite BBC TV programmes and view exclusive content.
BBC News - Access the BBC News app for up-to-the-minute and breaking news reports.
BBC Sport - The BBC Sport app offers the latest sports news, live action, scores and highlights.
Web Browser - Application for accessing websites via the internet. Use the following buttons for
navigation in the browser:
CH+
Scroll page up
CH-
Scroll page down
Red Button
Show/hide browser menu bar
Yellow Button
Zoom in
Blue Button
Zoom out
Note: The Netflix and YouTube apps are included within the main menu for quicker access, they are not
included in the ‘More Apps’menu.
Note: Some Apps, such as Netflix, require a monthly subscription. This is not included with the purchase
of your TV set.
30
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:30
07/03/2018 16:27:52
TV Menu Operation
MEDIA MENU
Miracast (Screen mirroring)
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll buttons.
To confirm any settings press [OK] button. To exit this menu at any time, press [EXIT] button.
Although the TV has many of the most popular Apps preinstalled, the Miracast function allows almost
unlimited Apps to be shown on the TV screen including many on demand videos, subscription based
services and your favourite applications such as Amazon TV, Emails, Facebook, etc.
The Miracast (screen mirroring) feature allows you to connect to a compatible Smartphone, Tablet, PC or
Laptop wirelessly and ‘mirror’ what is on your device onto the TV’s screen.
See below an example of a connection to a Laptop PC running Windows 10 that has built in Wireless
Display.
For connection to other types of devices please refer to the instruction manual that came with your
device.
Click on the monitor icon (circled
below) to access this feature.
Once you’re connected, you will
see this screen on your Laptop/PC.
Once a successful connection is made,
your TV will display this screen.
Note: Many Android and Windows devices support screen mirroring. For Apple devices, you need a separate Apple TV
box to allow screen mirroring onto non Apple products.
Note: If your smartphone or tablet does not include mirroring, it may be possible to connect a suitable cable from your
device directly to one of the HDMI inputs on the rear of the TV. Suitable cables for your device should be available from
a local electronics retailer.
31
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:31
07/03/2018 16:27:52
TV Menu Operation
MEDIA MENU
USB mode and media server
The USB media and the Media Server offer the playback of various different types of content that is
either saved on your USB memory stick or external media server. (USB mode allows you to view/playback
files from an external USB device and Media Server connects to your home network and can view/playback
files from your compatible laptop, PC, tablets and smart phones).
When accessing the USB media or media server features the below menu screen will appear. The content
will be divided into Photo, Music, Movie and All.
1) You can navigate through the menus using the
buttons on the remote control,
scroll
to confirm the item you wish to play/view press the
[OK] button (the USB1 and USB2 options will only
show when a USB stick is connected).
2) USB mode - Select the USB drive (If your drive
only has 1 partition you will only see 1 item).
Media Server - Select the external device
that you would like to access.
3) You can now access the item. Press [OK] to view.
4) Whilst viewing your media, you can control
the item by using the remote control playback
buttons or by pressing [INFO] you can access the
on-screen playback menu, you can now make
and [OK]
your selection by using the
buttons on the remote control.
Note: If you experience a playback issue, please ensure the files being used are the correct format (example - the picture
plays but no sound) See compatible file types for USB/DLNA page for compatible file types.
Note: USB extension cables are not recommended as they can cause a reduction in picture/audio quality and stoppages
during play back of USB content.
32
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:32
07/03/2018 16:27:52
DVD Setup
DVD SETUP (For models with built in DVD players)
To enter this menu please ensure the TV is in DVD source & press [DVD SETUP]
buttons.
If you wish to make changes to any of the default settings, use the scroll
To confirm any settings press [OK] button. To exit this menu at anytime, press [DVD SETUP] button.
TV Display - Choose from the following options:
4:3 Pan scan
PS traditional picture format, this is often used with older film formats
4:3 Letter box
LB Traditional picture which has been adapted for widescreen
Wide
16:9 Widescreen picture format
Speaker Setup - Choose from the following options:
LT/RT
Converts from multi-channel sound to mono
Stereo
Converts from multi-channel sound to stereo
Dual Mono - Choose from the following options:
Stereo
Outputs 2 channels of sound both left and right
Mono L
Outputs left side sound
Mono R
Outputs right side sound
Mix Mono
Outputs a single channel of sound but mixed between right and left
Dynamic Range - This is the difference between the quietest and loudest sounds. This setting only works
with DVD discs recorded in Dolby digital.
Full
Set this to listen with the range recorded on the disc
3/4
Set this to listen with a range equivalent to a normal television
1/2
Set this to listen with a smaller difference between the maximum and minimum volume
1/4
Set this to listen with a smaller difference between the maximum and minimum volume
Off
Set dynamic range to off
TV Type - Choose from the following options:
PAL
For TVs produced in the UK,Europe, Asia, Australia etc
Multi
For both NTSC and PAL
NTSC
For TVs produced in North America, Japan etc
Default - Choose from the following options:
Reset
Resets all options in the ‘DVD setup’ menu back to the default settings
Note: This TV/DVD player is pre-set to play Region 2 DVDs. In the event you wish to use the TV/DVD
in another country that uses different region discs, please visit www.umc-uk.co.uk. Select ‘Product
Support’, ‘Changing Region’.
33
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:33
07/03/2018 16:27:53
USB Record
USB RECORD - FREEVIEW/SAORVIEW MODE
The USB Record/PVR function is only available in Freeview/Saorview mode and only when used in
conjunction with a compatible USB memory stick or USB hard drive. The benefits of this are as follows:
• Pause live TV and then playback, rewind and fast forward (up to live TV).
• One button record, if you decide you want to record the current programme.
• Easy recording from the 7 Day TV Guide.
Due to the nature of the product, it is necessary to use a high speed USB memory stick (as the TV reads
from and writes to the memory stick at the same time, some memory sticks may not be suitable).
You can purchase high speed memory sticks from some computer stores, alternatively, we have a selection
of tested and compatible memory sticks available to purchase directly from the Helpline/website.
Recommended Minimum Specification - USB Memory Stick:
Read Speed
20 Mb/s (Megabits Per Second)
Write Speed
6 Mb/s (Megabits Per Second)
If you wish to use a USB portable hard drive larger
than 32GB, please refer to the FAQ section at the
rear of this user guide.
Pause Live TV (Time Shift)
A USB memory stick/hard drive must be connected to the TV in order to use this feature.
- Press the play/pause button and the television will pause and the live content will be recorded. To
resume watching press play/pause again.
- Press fast forward to go forward in a recording.
- Press fast rewind to go back in a recording.
Note: When you switch the TV to standby or change channel the ‘Time Shift’ memory is wiped. To
restart time shift you must press play/pause button.
Note: If channels are moved or deleted, then the USB Record/PVR will not function correctly.
Note: This television contains one TV tuner, therefore it can only record the channel you are watching
or record one channel while the television is in standby mode.
Note: USB Record/PVR function is only available in Digital/Freeview TV mode. Due to copyright laws and
illegal copying/recording it is not possible to record to/from any other input/output source.
Note: Recorded content can only be played back on the device that recorded it. It is not permitted (or
possible) to watch content recorded on the TV from Freeview/Saorview on another device.
34
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:34
07/03/2018 16:27:53
USB Record
USB RECORD - FREEVIEW/SAORVIEW MODE
One Button Record
At any point in time you may decide to record the current programme that you are watching. To do this
you need to press the red record button on the remote control.
Playback files from Record list
To playback recorded files you will be required to have the TV set to the Freeview/Saorview source mode.
Once set to the correct source, access the recorded list by pressing the [REC LIST] (Recorded List) button
on the remote control, the recorded list should now appear on the screen. Use the arrow buttons on the
remote control to navigate to the recording you wish to playback and then press [OK] on the chosen file
to start playback.
To enable controls within the lock menu, the function needs to be enabled by turning on the System Lock.
Use the coloured buttons on the remote control for the following options:
•
•
•
•
Press [RED] to delete a selected recording.
Press [GREEN] to sort the items in the record list by date.
Press [YELLOW] to sort the items in the record list by name.
Press [BLUE] to enter the schedule list.
Note: Record functions are only applicable to sets with the built in USB Record/PVR function.
35
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:35
07/03/2018 16:27:53
General Information
FREQUENTLY ASKED QUESTIONS
General
I would like to have louder
sound by connecting additional
speakers or a Soundbar.
1) Use either the 3.5mm headphone output on the TV and a 3.5mm to
phono cable (available separately) to connect to an amplifier/surround
sound/soundbar. Please note this will deactivate the TV’s built in speakers.
or:
2) Connect a digital optical audio cable from the TV’s digital optical audio
output to your amplifier/surround sound/soundbar digital optical audio
input.
General
Why are some options in the
menu unavailable and greyed
out.
Some options are only available in certain inputs/sources, i.e. HDMI. They are
unavailable in the other sources where they have no effect.
General
Can I stop my TV automatically
turning off after 4hrs?
Yes, in the ‘Time’ menu settings, scroll down to Auto standby and select ‘OFF’.
TV
I have tuned in Digital TV but I
am not receiving any or all of the
channels and/or the channels I
receive are breaking up.
1) Check you are in an area that can receive Freeview/Saorview, visit www.
freeview.co.uk or www.saorview.ie
2) Check you are using an aerial that is able to receive a good digital signal.
In most cases, you will need an outdoor digital hi-gain/wideband aerial.
In areas that have excellent digital coverage, you may be able to use a loft
type aerial but it is highly likely that you will also need to connect a booster
between the back of the TV and the TV aerial wall socket. Unfortunately, to
receive a good enough digital signal, it is not possible to use a portable/
indoor type aerial.
TV
I have re-tuned my television
but when I switch it off it is not
storing the channels.
If the TV does not save the channels when you power it off, it’s likely the
channel database has become corrupt.
1) Turn off the TV.
2) Remove the RF/Aerial cable from the rear of the TV and then turn the TV
back on again.
3) Using the remote control, press Menu followed by 8-8-8-8 to enter the
initial setup/first time installation menu.
4) Press OK (let the TV run the full tuning process).
5) Once completed, turn off the TV, reconnect the RF/Aerial cable then turn
the TV back on again.
6) Repeat steps 3 & 4.
VCR/DVD
Recorder
I have connected the TV to my
VCR or DVD Recorder via SCART
but it is not recording.
In addition to connecting via SCART, you should connect the aerial cable
from the wall socket to your VCR/DVD Recorder and another aerial cable
from the VCR/DVD Recorder to the TV.
Game Consoles
I have connected my
Playstation/Xbox to the TV via
HDMI, but I am not receiving
any pictures or sound on my
Television.
1) Ensure the TVs’ source is set to HDMI.
2) Check your settings on your Playstation/Xbox are as per the Playstation/
Xbox instruction manual.
Game Consoles
I have connected my
Playstation/Xbox to the TV via
Component cables (red, green
& blue) but I am not receiving
any sound.
Component cables only provide HD pictures. For the sound you will need
to connect the red & white audio cables on the Playstation/Xbox to the red
& white phono inputs (or mini AV input where fitted) on the rear of the TV.
Please refer to the ‘Connections’ pages.
System Lock
I have changed the password
on the television and now
forgotten it.
There is a master password of 4711, to gain access to the TV menu and reset
the normal password.
USB Mode
I have inserted a USB Memory
Key, but the TV does not
recognise it.
Ensure the USB Memory Key is formatted to type FAT32.
36
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:36
07/03/2018 16:27:53
General Information
FREQUENTLY ASKED QUESTIONS
USB Mode
Using a USB portable hard drive
/ larger than 32GB.
If you wish to use a portable hard drive larger than 32GB, please note that
it must be formatted to the FAT32 file system in order to operate on this TV.
Windows XP/Vista computers are only capable of formatting up to 32GB,
therefore, you will need a software programme/utility to format larger hard
drives.
Please refer to the website, www.umc-uk.co.uk, for more information.
DVD (For TV models
with DVD only)
I have inserted a disc but it is
not playing.
1) Ensure you have inserted the disc facing the correct way.
2) Ensure the disc is clean and is not scratched.
3) Some copied discs will not play.
4) Check the DVD is a region 2 disc – to change the region of the DVD player,
refer to www.umc-uk.co.uk, select ‘Changing DVD Region’ in the ‘Product
Support’ section
DVD (For TV models
with DVD only)
I have pressed the eject button
but the disc is not coming out.
To eject the disc hold the stop/eject button for 4 seconds.
USB Record/PVR
(For TV models with
USB record only)
I cannot change the channel,
access the menu or use the red
button.
During time shift you cannot change the channel, access the menu or use
the red button.
USB Record/PVR
(For TV models with
USB record only)
When using the USB to record
the picture ‘breaks up’ or
experience loss of sound.
Check the USB memory stick meets the minimum read speed requirements.
Standard definition channels require a read speed of 20 Mb/s (Megabits per
second) and a write Speed of 6 Mb/s (Megabits per second) HD channels
require the read speed of 80 Mb/s (Megabits per second) and a write speed
of 40 Mb/s (Megabits per second). USB 3.0 sticks should be used where
possible.
Freeview HD
I cannot access all Freeview
channels.
Some data channels for Freeview can only be obtained when the TV’s
ethernet port is connected to your router.
Freeview HD
I cannot find the Freeview HD
channels.
Freeview HD channels found during tuning will be placed in channel
positions above 100. For example, 101 (BBC1 HD), 102 (BBC2 HD) etc.
37
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:37
07/03/2018 16:27:53
General Information
FREQUENTLY ASKED QUESTIONS
Smart
I cannot access Smart apps on my
Smart TV
Check your TV is connected to the internet and there is suitable signal
strength.
You can carry out a Network Test as follows:
1) Press Menu on the remote control.
2) Select ‘Network’ Menu then ‘Network Test’.
3) This will show the status of the internet connection.
If you have no internet connection you must re-connect your TV as follows:
1) Press Menu on the remote control.
2) Select ‘Network’ Menu then ‘Wi-fi config’.
3) Then ‘Wifi Auto Search’.
4) The TV will then automatically search for Networks.
5) Select the desired network then enter the Network password.
6) The TV will then connect.
Note: An icon will appear in the top right hand side of the Application page
to show you if the TV is connected to the internet.
Smart
I cannot access content through the
Media Server settings
Check your TV is connected to your local network and there is suitable signal
strength. Check the server devices you are trying to connect with are also on
the Network and are set to share content.
Smart
I cannot access content through the
Wireless Connection settings
Ensure the device you are trying to mirror onto the TV is correctly paired
with the TV. Check the settings on the device, move your device closer to
the TV set, check you guide of the device to ensure it is compatible with this
function.
Smart
While using Media Server, access is
not possible or connection is slow
If the folder you are attempting to view contains a large amount of files, it
may take a little while to load, this is normal, content may be blocked on the
host PC. Reconfigure the host PC to allow external access.
Note: Host may not be connected to your network.
Smart
The YouTube app does not work
and/or is erratic
The Youtube app requires the TV to be set with the correct date and time,
please see the ‘Time Menu’ page for further instructions. Ensure your
network is not blocking access to YouTube and the speed of your internet
connection is fast enough for viewing YouTube content.
38
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:38
07/03/2018 16:27:53
General Information
COMPATIBLE FILE TYPES FOR USB/DLNA
Media
Codec
MPEG1/2
Film
Media
Resolution
Bit Rate
File Extension
1080P@60fps
40Mbps
.DAT, .VOB, .MPG, .MPEG,.ts, .trp, .tp, .mp4, .mov,
.3gpp, .3gp, .avi, .mkv, .asf
MPEG4
1080P@60fps
40Mbps
.MPG, .MPEG, .mp4, .mov, .3gpp, .3gp, .avi, .mkv, .asf
XviD
1080P@60fps
40Mbps
.mp4, .mov, .avi, .mkv, .asf
Sorenson H.263
1080P@60fps
40Mbps
H.263
1080P@60fps
40Mbps
H.264
1080P@60fps
80Mbps
HEVC/H.265
2048x1088@60fps
30Mbps
.mp4, .mkv
AVS
1080P@60fps
40Mbps
.ts, .trp, .tp
AVS+
1080P@60fps
50Mbps
.ts, .trp, .tp
VC1
1080P@60fps
40Mbps
.wmv
.3gpp, .3gp
Motion JPEG
640x480@30fps
10Mbps
.mov, .avi, .mkv
VP8
1080P@30fps
20Mbps
.mkv, .webm
VP9
2048x1088@60fps
30Mbps
.mkv, .webm
Codec
Frequency
Bit Rate
File Extension
MPEG1/2 Layer1,
2, 3
16KHz ~ 48KHz
Layer1 32Kbps ~ 448Kbps .avi, .asf, .mkv, .ts, .trp, .tp, .DAT, .VOB, .MPG,
Layer2 8Kbps ~ 384Kbps
Layer3 8Kbps ~ 320Kbps .swf, .m4a)
AC3
32KHz, 44.1KHz,
48KHz
32Kbps ~ 640Kbps
.ac3, .avi, .mkv, .3gpp, .3gp, .mp4, .mov,
m4a, .ts, .trp, .tp, .DAT, .VOB, .MPG, .MPEG
EAC3
32KHz, 44.1KHz,
48KHz
32Kbps ~ 640Mbps
.ec3, .3gpp, .3gp, .mp4, .mov, m4a, .ts, .trp, .tp,
.DAT, .VOB, .MPG, .MPEG
HEAAC
8KHz ~ 48KHz
VORBIS
Up to 48KHz
LPCM
8KHz ~ 48KHz
64Kbps ~ 1.5Mbps
.avi, .mkv, .3gpp, .3pg, .mp4, .mov, .ts, .trp, .tp,
.DAT, .VOB, .MPG, .MPEG, .wav, .m4a
LBR(cook)
8KHz, 11.025KHz, 22.05KHz,
44.1KHz
64Kbps ~ 128Kbps
.rm, .rmvb
FLAC
8KHz ~ 96KHz
< 1.6Mbps
DRA
8KHz ~ 48KHz
< 512Kbps
File Type
Resolution
.aac, .avi, .mkv, .3gpp, .3gp, .mp4, .mov, m4a, .ts,
Music
Media
JPEG
Photo
Internal Subtitle
External
Subtitle
PNG
15360x8640, (1920x8 x 1080x8)
.mkv, .webm, .3gpp, .3gp, .mp4, .mov, m4a, .ogg
.ts, .trp
File Extension
Base-line
1024x768
Progressive
9600x6400
Non-interlace
1200x800
Interlace
.jpg/.jpeg
.png
BMP
9600x6400
.bmp
GIF
6400x4800 (800x8 x 600x8)
.gif
File Extension
Container
Subtitle Codec
mp4
MP4
DVD Subtitle, UTF-8 Plain Text
mkv
MKV
ASS, SSA, UTF-8 Plain Text, VobSub, DVD Subtitle
avi
AVI(1.0, 2.0)
XSUB, XSUB+
Remark
File Extension
Subtitle Parser
.srt
SubRip
.ssa/ .ass
SubStation Alpha
.smi
SAMI
.sub
SubViewer, MicroDVD, DVDSubtitleSystem,
SubIdx(VobSub)
.txt
TMPlayer
SubViewer 1.0 & 2.0 Only
39
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:39
07/03/2018 16:27:53
SHA/MAN/0332
UMC Poland sp. z o.o
Ostaszewo 57B, 87-148 Lysomice,
Poland
Assembled in Poland
www.sharp.eu/av
UNI - User Guide - Sharp SMART LED TV with Freeview HD models.indd Sec1:40
07/03/2018 16:27:53
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising