Sharp | LC-70UI9362K | Quick Start Guide | Sharp Flagship Ultra HD 4K HDR Smart TV Quick start guide

Sharp Flagship Ultra HD 4K HDR  Smart TV Quick start guide
1
5
2
9
6
3
MUTE
4
8
ON/OFF
7
0
PICTURE
SOUND
SUBTITLE
OK
SOURCE
TEXT
REPE AT
APPS
TV
FAV
EXI T
CH
TV
GUIDE
VOL
MEN U
BAC K
INFO
3D
PVR/MEDIA
A-B
Online Manual
1. Plug
2. Accessories pack
}
TV Panel/Screen
2.
Rear of TV
Both the plug and accessories pack must be placed at the rear of the TV.
1.
4) Never put anything in the box on the screen/panel side of the TV as it’s likely to damage it.
1) Remove the stand/feet from the TV.
2) Put all of the accessories that came with the TV in the box ensuring they are placed at the back of the TV.
(not near the screen/panel side) Note: In the event of warranty/service support, you do not need to send
the accessories/stand/feet.
3) Ensure the power cable / plug is located at the back of the TV (not on the screen/panel side)
Please take the following steps:
The best way to package it is in the original box.
If you need help setting up your TV or you require any technical support, in the first instance please contact
the helpline.
In the unlikely event you need to return the product to the store/retailer from where it was purchased or
you need warranty/service support, please ensure you package the item adequately in order that it does
not get damaged.
Re-packing the Television
To launch the Online Manual, press the [MENU] button and then select Settings>About TV>Help Information>
View Online Manual.
SHA-QSW-0041 LC-70UI9362K.indd 1
1
2
3
4
GOT O
REC LIST
Closed Christmas and New Years day
16/11/2018 13:58:14
Key
VOL (+/-) - To increase/decrease the sound level.
PICTURE - Scrolls through picture mode options.
SOUND- Scrolls through sound mode options.
SOURCE - To display the input/source menu.
CH (+/-) - To increase or decrease the channel being watched.
MENU - To display OSD menu.
EXIT - To exit all menus.
( / / / / OK) - Allows you to navigate the on-screen menus and adjust
the system settings to your preference.
BACK - To go back a previous step.
FAV - To display favourites menu.
NUMBER BUTTONS - 0–9 to select a TV channel directly.
TV GUIDE - Opens the 7 day TV guide (digital TV mode).
- To return to the previous channel viewed.
STANDBY - Switch on the TV when in standby or vice versa.
MUTE - Mute the sound or vice versa.
For models with integrated DVD players.
For models with PVR Function.
For models with USB Playback.
For models with 3D functions.
REMOTE CONTROL
1
2
3
4
INFO - Press once for now/next channel information.
- Press twice for information about the current programme.
TEXT - To enter/exit Text.
SUBTITLE - To switch the dialogue at the bottom of the screen (on/off).
TV - To switch to Digital Channels.
YOUTUBE - Access the Youtube App.
NETFLIX - Access the Netflix App.
APPS - Access the APPS menu.
RECORD - Access the USB record function.
REC LIST - Opens the list of previously recorded items.
- To restart the current chapter
- To advance forward to the next chapter
- To stop the playback/Eject Disc
(To EJECT the disc press/hold the
button for 4 seconds)
- To play in fast rewind mode
- To play in fast forward mode
- To play/pause
Please save your box/packaging as you will need this in the event of warranty/service repair or support.
We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to
package your item in the event of warranty/service repair is in it’s original box/packaging.
32.5
Location of VESA mounting points
VESA 400 x 300 (mm)
1562W x 975H x 334D
AC 220V ~ 240V; 50Hz
160/200/230W (home mode/standard/max)
(<0.5W in Standby)
2 x 10 + 15W Subwoofer / 2 x 8 + 15W Subwoofer
1 x Digital Optical Audio output, 1 x 3.5mm Headphone
3 x HDMI2.0, 3 x USB, 1 x SD card reader,
1 x RJ45 LAN/Ethernet,
1 x Composite/CVBS Video & Component/YPbPr Input, 1 x L/R Audio input for
Composite/CVBS & Component YPbPr
75 ohm Antenna / Analog / DVB / Satellite
LC-70UI9362K
3840 (H) x 2160 (V)
n/a
<0.50 W
234 kWh
160.0 W
177 cm / 70 inches
A
LC-70UI9362K
Sharp
Technical Specification
Product fiche
Trademark
Model ID
Energy efficiency class
Visible screen size (diagonal)
On-mode power consumption
Annual energy consumption *1
Standby power consumption *2
Off mode power consumption
Screen resolution
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned off with the remote control/standby button and no function is active.
Additional Technical Information
RF
Inputs
Sound Outputs
Speaker*/ Amplifier Watts (RMS)
Voltage and power consumption
Dimensions including stand (mm)
Net weight (Kgs)
Wall Mounting
If wall mounting your television, please refer to the Operating Instructions.
*Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).
Harman Kardon is trademark of HARMAN International Industries,
Incorporated, registered in the United States and/or other countries.
Soundbar
Terms and conditions apply. Online registration only.
nly.
Win a
www.registertoday.co.uk/sharp
p and enter into a prize draw to
Register your manufacturers guarantee online within 14 days of purchase at
Quick Start Set Up Guide
For information on using the TV’s features, please refer to the Operating Instructions. (Available online to download.)
Model Numbers
LC-70UI9362K
Quick & easy guide for setting up your TV
What is included in the box
Using the remote control
Setting up the TV for the first time - including attaching the stand
Connecting other devices to the Television
Need help setting up or using your TV?
Please contact the UK & ROI Helpline*
Telephone UK 0330 024 0803 or ROI 01443 3323
Online support at: www.umc-uk.co.uk
Email support at: service@umc-uk.co.uk
*Calls to 0330 numbers are charged at standard call rates and are included as part of any bundled minutes with your
phone provider.
Calls to the ROI number are charged at the local call rate.
The telephone opening hours are Monday to Friday 8.30am to 6pm, Saturday 9am – 5pm.
Bank Holidays - 10am to 4pm
SHA/QSW/0041
This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution
of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft.
GOTO - To go to a specific chapter.
A-B - Press once to set point, press a second time to return to point.
ANGLE/3D - Select different angle of DVD.
REPEAT - To repeat playback.
Sky Remote Code
Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property,
including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content
and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage,
content owners may require Microsoft to revoke the device’s ability to consume PlayReady-protected content.
Revocation should not affect unprotected content or content protected by other content access technologies.
Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you
will not be able to access content that requires the upgrade.
Microsoft PlayReady™
If you wish to use your Sky remote to operate the TV’s basic
functions, you will need a Sky remote control (Revision 9 or later) and
you will need to program it with the code 2134. If you wish to use
your Sky Q remote to operate the TV’s basic functions, you will need
to program it with the code 4170.
Setting up the TV set for the first time
What is included
in the box
1 Fitting the stand
TV panel must be facing downwards.
1 x Operating Instructions
Note: To complete the stand
installation you will require a
cross head screw driver.
1 x Quick Start Guide
1 x TV
L
Register your manufacturers
guarantee online within
14 days of purchase at
www.registertoday.co.uk/sharp
and enter into a prize draw to
win a Sharp Soundbar
1 x Remote Control
2 x AAA Batteries
1
1 x Stand installation pack
R
2
Place the TV set on a flat and clean surface
with the panel facing downwards to avoid
damage.
1 x RF Cable
6x
6x
3
When the two feet are fitted, they will appear
as in the picture above, with the tips of the feet
pointing away from each other.
When the stand/feet are in the correct position,
secure the feet to the underside of the TV set
using 6 screws provided.
Terms and conditions apply. Online registration only.
Used for attaching the stand
to the TV set (fig.2)
UK Only.
3 Powering On the TV
2 Connecting your set
Remote Control:
Installing Batteries
TV Control Stick
Outdoor Digital
TV Aerial
1.
2.
ROI Only.
To receive Freeview channels, in particular
Freeview HD channels, you will need a
Digital TV aerial and be in a good Freeview
coverage area. You can check coverage for
your postcode at www.freeview.co.uk.
To receive Saorview channels, in particular
Saorview HD channels, you will need a
Digital TV aerial and be in a good Saorview
coverage area. You can find out more at
www.saorview.com.
TV control stick
1) Connect the TV to your power socket.
2) If you wish to use the TV to receive Freeview/Saorview channels, connect the RF input from
the TV to your outdoor Digital TV aerial. If you do not wish to receive Freeview/Saorview, skip
this step.
4 First time installation
Switch on the television by pressing the TV control stick
located on the TV set.
Insert the batteries supplied into the remote control and
press the standby button to power on the TV.
Basic installation steps are shown below. These may vary slightly depending on model.
Please note that any Freeview HD channels
found during tuning will be placed in
channel positions above 100.
For example, 101 (BBC1 HD) 102 (BBC2 HD)
etc.
Connectivity
2
3
Languages
Country Selection
Select your preferred on-screen display language. This will change the language
in which the menus and associated information is displayed in. When set up has
been completed, to change this press the [MENU] button and then select Settings >
System Menu > Language
Select the correct flag for the country in which the set will be
used in. This will enable the set to correctly install the functions
applicable in the country of use.
L
ARC
K
ETHERNET
5V
A
4
6
5
Environment of Use
Home Mode: For normal use, by default it is set to a power saving mode
which reduces the energy used by up to 25% (by reducing the power to
the LED/LCD panel). This can be changed in the picture mode settings.
You can connect the TV to your broadband router or wireless network in order
to take advantage of the Smart functions. If you connect the TV to your router
using an Ethernet cable (recommended) this step will be skipped.
Default Source
Select the source which you use the most. If Digital TV (Freeview) is chosen,
then at the next step, the set will tune in and default to Digital TV (Freeview).
If one of the other sources is selected, then the set will not tune in at this
stage and default to that input. If it is required to tune the set in later, press
the [MENU] button and then select Settings>Channels
Choose to install terrestrial channels now or later.
500mA MAX
USB 1 (2.0)
USB 2 (2.0)
Support Advice
Information regarding support is displayed for a little while.
Tuning continues and a progress bar is shown with the number of
channels found indicated below.
If you are picking up signals from more than one transmitter, you
will be requested to select your primary and secondary regions.
1
D
L
DIGITAL
AUDIO OUT
OPTICAL
If you have a Netflix account, it can be set up on the television
here. Once set up and validated, the First Time Installation
returns to the next step.
9
Tune in Channels
5V
500mA MAX
C
Set Up Netflix
Network setup
8
7
SHA-QSW-0041 LC-70UI9362K.indd 2
M
B
(2.0)
2
F
R
VIDEO/Y
(2.0)
J
G
Pb
Pr
S AT I N
Note: In home mode,
the TV will switch off
automatically after 4
hours in the event that
no buttons are pressed on
the TV or remote control.
(You can change this
by pressing the [MENU]
button and then selecting
Settings>Time>Auto
Standby)
N
900mA MAX
Introduction
When the set first turns on, it enters the First Time Installation
mode. This can be restarted by restoring the set to default settings
in the ‘About TV’ Menu.
O
U S B 3( 2. 0)
1
E A R P HONE
P
E
I
H
A
Ethernet/LAN*
Network connection
I
SAT IN
Satellite input
B
Digital Audio
Digital Optical Audio Output
J
RF in
RF / TV aerial input
C
USB 1
USB port 2.0
K
HDMI 3
HDMI input 2.0 (ARC)
D
USB 2
USB port 2.0
L
USB 3
USB port 2.0
E
L/R
Audio shared for Video/Composite
HDMI
input
and
component/
YPbPr
M
CI card in
Common interface module
F
HDMI 1
HDMI input 2.0
N
SD
SD card input
G
HDMI 2
HDMI input 2.0
O
Earphones
Earphone input
H
Video/YPbPr
Video Input (green) and HD input
(Ypbpr)
P
Service Input
Input is used only by
service centres
* The Ethernet/LAN port is used for Freeview HD services and smart functions.
16/11/2018 13:58:17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising